| 2005-10-26 Paul Jakma <paul.jakma@sun.com> |
| |
| * (general) static/extern functions and definitions. |
| * rip_interface.h: new file, export the public functions from |
| rip_interface.c |
| * ripd.c: Update couple more functions to specify void |
| explicitely. |
| |
| 2005-10-17 Vincent Jardin <vincent.jardin@6wind.com> |
| |
| * ripd.c: rip_create_socket() for each packet, it does not bind to the |
| proper interfaces because we forget to use the from address when |
| it is specified. |
| |
| 2005-10-06 Alain Ritoux <alain.ritoux@6wind.com> |
| |
| * rip_interface.c: Now the command "no ip rip split-horizon |
| poisoned-reverse" just inhibates the poisoned-reverse effects |
| but keep spli-horizon activ. |
| |
| 2005-10-01 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * rip_zebra.c: (config_write_rip_redistribute): Remove local hard-coded |
| table str[]. Replace str[] with calls to new library function |
| zebra_route_string(). |
| * ripd.c: Remove local hard-coded table route_info[]. |
| (show_ip_rip) Replace uses of str[] with calls to new library |
| functions zebra_route_char and zebra_route_string. |
| |
| 2005-09-29 Alain Ritoux <alain.ritoux@6wind.com> |
| |
| * rip_snmp.c: rip2IfConfReceive() sends values in conformance |
| with RFC. Also PeerDomain is now set to a STRING type. |
| * ripd.h: rip_redistribute_add() API includes metric and distance |
| added field external_metric in routes. |
| * ripd.c: rip_redistribute_add() API i.e. stores metric and distance |
| Now allows a RIP-route to overcome a redistributed route coming |
| from a protocol with worse (higher) administrative distance |
| Metrics from redistribution are shown in show ip rip |
| * rip_zebra.c: adapt to the rip_redistribute_add() API, i.e. |
| provide distance and metric |
| * rip_interface.c: adapt to the rip_redistribute_add() API |
| * rip_routemap.c: no RMAP_COMPILE_ERROR on (metric > 16) usage |
| rather a CMD_WARNING, because set metric ius shared with other |
| protocols using larger values (such as OSPF) |
| The match metric action takes first external metric if present |
| (from redistribution) then RIP metric. |
| |
| 2005-09-28 Alain Ritoux <alain.ritoux@6wind.com> |
| |
| * ripd.c: use new md5 API |
| |
| 2005-08-16 Paul Jakma <paul.jakma@sun.com> |
| |
| * ripd.c: (general) Fix previous commit, broke multicast bind and |
| hence setting of source port, which broke communication with |
| non-borken ripd. Fix removes more stuff from rip_interface.c |
| than it adds to ripd.c ;) |
| (rip_create_socket) the to argument really is a from argument, |
| rename it. Set the source port to RIP port unconditionally, it's |
| required. |
| (rip_send_packet) Set from address correctly for multicast. |
| (rip_output_process) trivial: num can be BSS specified, rather |
| than in body. |
| * rip_interface.c: (rip_interface_multicast_set) strip out |
| redundant stuff related to bind, which rip_create_socket does. |
| Just make it set the multicast socket option, as per the |
| interface concerned, no more. |
| |
| 2005-06-03 Paul Jakma <paul.jakma@sun.com> |
| |
| * ripd.c: (rip_create_socket) move it up so rip_send_packet |
| can use it too. Make it static. Remove the getservbyname stuff, |
| as RFC2453 3.9.2 says non-RIP port messages should be discarded, |
| quagga doesnt accept them, no need to lookup port. |
| Take a 'to' argument, if socket should be bound to something else. |
| setsockopt_so_recvbuf might need privs, move it to the raised |
| privileges section. |
| dont forget to close the socket if bind fails. |
| (rip_send_packet) use strncpy, just in case (address is under |
| our control anyway, but still). |
| dont duplicate rip_create_socket - just use it. |
| (rip_create) rip_create_socket takes an argument now, modify. |
| |
| 2005-06-01 Paul Jakma <paul.jakma@sun.com> |
| |
| * rip_interface.c: Fix authentication, no-auth impossible to specify |
| (rip_interface_new) default to RIP_NO_AUTH |
| (rip_interface_reset) ditto |
| (rip_interface_config_write) write out config for simple |
| |
| 2005-05-29 Paul Jakma <paul@dishone.st> |
| |
| * ripd.c: (rip_output_process) fix error which crept in my |
| previous rip auth untanglement commit - it had become impossible |
| to not have authentication (even for v1). |
| |
| 2005-05-28 Hasso Tepper <hasso at quagga.net> |
| |
| * rip_routemap.c: Fix set_metric_addsub_cmd help, it's not about BGP |
| metric. |
| |
| 2005-05-26 Hasso Tepper <hasso at quagga.net> |
| |
| * rip_routemap.c: In case of '0.0.0.0' used as 'nexthop', use sender |
| address as nexthop in routemap. |
| |
| 2005-05-26 Hasso Tepper <hasso at quagga.net> |
| |
| * rip_routemap.c: Make "match interface" routemap command match both - |
| in and out interfaces. |
| |
| 2005-05-11 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * rip_interface.c (rip_interface_add): Need to call |
| rip_passive_interface_apply (was already calling it in |
| rip_interface_up). |
| |
| 2005-04-11 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * rip_zebra.c (rip_redistribute_set, rip_redistribute_unset, |
| rip_redistribute_clean): Change 2nd arg to zebra_redistribute_send |
| from zclient->sock to zclient. |
| |
| 2005-04-02 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * rip_interface.c: (rip_interface_delete) After deleting, set |
| ifp->ifindex to IFINDEX_INTERNAL. |
| |
| 2005-02-04 Paul Jakma <paul@dishone.st> |
| |
| * ripd.c: Untangle the construction of RIP auth data. |
| (rip_auth_prepare_str_send) new helper function, prepare |
| correct key string. |
| (rip_auth_simple_write) new helper, write out the |
| rip simple password auth psuedo-RTE. |
| (rip_auth_md5_ah_write) new helper, write out the |
| MD5 auth-header psuedo-RTE. |
| (rip_auth_header_write) new helper, write out correct |
| auth header data / psuedo-RTE. |
| (rip_auth_md5_set) rip out the memmove and writing of the |
| auth header psuedo-RTE. So that all that is left is to |
| write the trailing auth digest, and update digest offset |
| field in the original header. |
| (rip_write_rte) rip out writing of RIP header, writing of |
| simple auth data psuedo-RTE. Make it do what its name suggests, |
| write out actual RTEs. |
| (rip_output_process) remove the incorrect additional decrements |
| of rtemax. Prepare the auth_str, which simple or MD5 auth will |
| need. Move write out of RIP header and auth data to inside the |
| loop. Adjust paramaters as required. |
| |
| 2005-01-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * ripd.c: (rip_create_socket) Replace perror with zlog_err. |
| |
| 2005-01-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * ripd.c: (rip_create_socket) Save errno before calling |
| ripd_privs.change. |
| |
| 2005-01-04 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * ripd.c: (rip_recvmsg) Use ZCMSG_FIRSTHDR instead of CMSG_FIRSTHDR. |
| |
| 2004-12-15 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * ripd.c: (rip_read) Improve 2 error messages to show the source of |
| the packet when the lookup fails. |
| |
| 2004-12-08 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * *.c: Change level of debug messages to LOG_DEBUG. |
| |
| 2004-12-07 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * rip_main.c: (main) The 2nd argument to openzlog has been removed. |
| |
| 2004-12-03 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * rip_main.c: (sigint) Use zlog_notice for termination message. |
| (main) Add a startup announcement using zlog_notice. |
| |
| 2004-11-25 Hasso Tepper <hasso at quagga.net> |
| |
| * rip_main.c: Make group to run as configurable. |
| |
| 2004-10-22 Paul Jakma <paul@dishone.st> |
| |
| * ripd.c: Collapse redundant passing of various address structs, |
| struct interface and struct connected as arguments to functions |
| down to two key arguments, namely struct connected and, possibly, |
| address of source/destination. Testing for RIPv1 would be useful. |
| (rip_read) lookup struct connected for the received packet, pass |
| it on. |
| * rip_interface.c: With previous changes, we no longer have to tread |
| carefully with struct connected, as it will always be there and |
| valid. |
| |
| 2004-10-19 Andrew J. Schorr <aschorr@telemetry-investments.com> |
| |
| * ripd.c: (rip_update_interface) if connected->destination is NULL, |
| get the broadcast address with ipv4_broadcast_addr() |
| * rip_interface.c: (rip_interface_multicast_set) |
| connected->destination may be NULL. Improve message if |
| setsockopt_multicast_ipv4 fails. Improve message if bind fails. |
| (rip_request_interface_send) If connected->destination is NULL, |
| get the broadcast address with ipv4_broadcast_addr(). |
| (if_valid_neighbor) Handle PtP subnet addressing properly. |
| Speed up code by using prefix_match properly. |
| |
| 2004-10-13 Hasso Tepper <hasso at quagga.net> |
| |
| * ripd_snmp.c: Remove defaults used to initialize smux connection to |
| snmpd. Connection is initialized only if smux peer is configured. |
| |
| 2004-10-11 Hasso Tepper <hasso at quagga.net> |
| |
| * *.c: Make more strings const. |
| |
| 2004-10-08 Hasso Tepper <hasso at quagga.net> |
| |
| * *.c: Fix compiler warnings: make strings const, signed -> unsigned |
| etc. |
| |
| 2004-09-26 Hasso Tepper <hasso at quagga.net> |
| |
| * ripd.c: Fix compiler warning. |
| |
| 2004-09-23 Hasso Tepper <hasso at quagga.net> |
| |
| * *.[c|h]: list -> struct list *, listnode -> struct listnode *. |
| |
| 2004-09-17 Paul Jakma <paul@dishone.st> |
| |
| * ripd.c: set receive buffer to a decent size, some systems have low |
| defaults. Problem noted and fix suggested by Stephan Schweizer |
| in [zebra 20967]. |
| |
| 2004-08-19 Paul Jakma <paul@dishone.st> |
| |
| * rip_interface.c: (rip_interface_multicast_set) get rid |
| of extraneous if_pointopoint arg. ifp is accessible via connected. |
| pass connected->ifp->ifindex to setsockopt_multicast_ipv4. |
| * ripd.c: (rip_send_packet) update call to |
| rip_interface_multicast_set |
| * ripd.h: update rip_interface_multicast_set prototype |
| |
| 2004-06-11 Sowmini Varadhan <sowmini.varadhan@sun.com> |
| |
| * ripd.c: (rip_distribute_update_all) distribute list hook |
| function pointer prototype requires struct prefix_list * arg. |
| (rip_distribute_update_all_wrapper) update to pass required arg, |
| NULL. |
| |
| 2004-06-06 Paul Jakma <paul.jakma@sun.com> |
| |
| * ripd.h: Add define for the RIPv2 Authentication Data family |
| Move the auth type defines up to where other defines live. |
| Add RIP_AUTH_MD5_COMPAT_SIZE, for backwards compatible |
| md5->auth_len size. Add md5_auth_len field to struct |
| rip_interface: (rip_interface_new) Init md5_auth_len to compatible |
| size. |
| (ip_rip_authentication_mode_cmd) Extended to handle setting |
| md5 auth-length. Appropriate aliases added. |
| (no_ip_rip_authentication_mode_cmd) Reset md5_auth_len to |
| compatible size. |
| (rip_interface_config_write) Teach it about md5_auth_len. |
| _always_ write out the auth-length, so that everyone will get |
| the setting in their config file, and hence allow for a future |
| change of default for md5_auth_len to be less painful - every md5 |
| user will have this setting in their config file. |
| ripd.c: (rip_packet_dump) Change nasty hard coded constants to |
| symbolic defines. Change various tests of 'ntoh.(variable) == |
| constant' to test 'variable == ntoh.(constant)'. Clean up |
| indentation on some long lines. |
| (rip_auth_simple_password) ditto. |
| (rip_auth_md5) ditto, also add length argument and sanity check |
| md5 data offset field. Sanity check md5 auth length, accept RFC |
| or old-ripd/cisco lengths. |
| (rip_auth_md5_set) as per (rip_packet_dump), also write out |
| the configured md5 auth length for the interface (old-ripd or rfc) |
| (rip_read) as per (rip_packet_dump) |
| (rip_write_rte) ditto |
| (rip_response_process) ditto |
| (rip_write_rte) ditto |
| |
| 2004-06-04 JJ Ludman <jacques.ludman@sun.com> |
| |
| * ripd.c: Interoperability fix. Correct value for MD5 auth length |
| is 16. Accept packets with this set to >= 16, and set to 16 |
| ourselves. |
| |
| 2004-05-31 Sowmini Varadhan <sowmini.varadhan@sun.com> |
| |
| * ripd.c: Fixup compile warnings |
| * rip_routemap.c: Ditto |
| |
| 2004-05-08 Paul Jakma <paul@dishone.st> |
| |
| * rip_zebra.c: sync with zclient changes. |
| * rip_interface.c: ditto. |
| |
| 2004-05-05 Anthony.Golia@morganstanley.com |
| |
| * ripd.c: (rip_update_jitter) Bound jitter to a more sensible |
| value, eg 1/4 of update time. |
| |
| 2004-05-03 Paul Jakma <paul@dishone.st> |
| |
| * ripd.c: (rip_rte_process) fix typo in merge of previous patch |
| and run function through indent. |
| |
| 2004-03-19 Jean-Yves Simon <lethalwp@tiscali.be> |
| |
| * ripd.c: (rip_rte_process) make ripd also check on |
| administrative distance of his own links to update routes. |
| |
| 2004-03-18 sowmini.varadhan@sun.com |
| |
| * ripd.c: rip_send_packet can get null connected address when |
| called in response to a unicast rip-request. Handle correctly. |
| |
| 2004-03-03 Krzysztof Oledzki <oleq@ans.pl> |
| |
| * ripd.c: fix "show ip rip" and per interface rip version selection. |
| |
| 2004-01-23 sowmini.varadhan@sun.com |
| |
| * rip_interface.c: obsolete unbind code in |
| rip_interface_multicast_set, and instead do the more portable |
| (though slower) method of creating a socket for each outgoing packet |
| and binding the source address on the new socket. |
| * rip_interface.c, ripd.c, ripd.h: Modify rip_request_send so that |
| source address is determined by the caller of rip_request_send for |
| ripv1 packets and non-multicast interfaces (rip_request_send loops |
| over all connected address in all other cases). |
| * rip_send_packet: don't send packets with source set to |
| ZEBRA_IFA_SECONDARY connected addresses; improved debug messages; |
| |
| 2003-06-07 Andrew J. Schorr <aschorr@telemetry-investments.com> |
| |
| * Allow ripd to receive RIPv1 |
| * add default as valid param to passive-interface command |
| |
| 2003-05-25 Vincent Jardin <vjardin@wanadoo.fr> |
| |
| * 6Wind patch merge. |
| |
| 2003-04-19 Hasso Tepper <hasso@estpak.ee> |
| |
| * rip_routemap.c: sync daemon's route-map commands to have same |
| syntax |
| |
| 2002-07-07 Kunihiro Ishiguro <kunihiro@ipinfusion.com> |
| |
| * zebra-0.93 released. |
| |
| 2002-06-30 Kunihiro Ishiguro <kunihiro@ipinfusion.com> |
| |
| * ripd.c (rip_output_process): When outgoing interface is same as |
| next hop interface, announce RIPv2 next hop otherwise set next hop |
| to 0. Revert previous change then take 6WIND way. |
| |
| 2001-09-14 Akihiro Mizutani <mizutani@dml.com> |
| |
| * ripd.c: RIP enabled interface's route is advertised by default. |
| |
| 2001-08-28 NOGUCHI Kay <kay@v6.access.co.jp> |
| |
| * rip_snmp.c (rip_ifaddr_delete): Add route_node_lookup() return |
| value check. |
| |
| * rip_interface.c (rip_multicast_leave): Fix bug of multiple IP |
| address on one interface multicast join/leave bug. |
| |
| 2001-08-26 NOGUCHI Kay <kay@v6.access.co.jp> |
| |
| * rip_interface.c (no_rip_passive_interface): Add NO_STR. |
| |
| 2001-08-19 Kunihiro Ishiguro <kunihiro@ipinfusion.com> |
| |
| * zebra-0.92a released. |
| |
| 2001-08-15 Kunihiro Ishiguro <kunihiro@ipinfusion.com> |
| |
| * zebra-0.92 released. |
| |
| 2001-06-17 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * rip_routemap.c (route_match_ip_address_prefix_list): Add match |
| ip next-hop prefix-list WORD. |
| |
| 2001-02-18 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * rip_interface.c (rip_passive_interface_clean): Call |
| rip_passive_interface_apply_all. |
| |
| 2001-02-12 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ripd.c (rip_response_process): Multicast address nexthop check |
| is moved from rip_nexthop_check. |
| |
| 2001-02-08 Matthew Grant <grantma@anathoth.gen.nz> |
| |
| * rip_interface.c (ipv4_multicast_join): Use |
| setsockopt_multicast_ipv4. |
| (ipv4_multicast_leave): Likewise. |
| (rip_if_ipv4_address_check): Interface which has IPv4 address can |
| be enabled. |
| |
| 2001-02-08 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * rip_interface.c (rip_interface_delete): To support pseudo |
| interface do not free interface structure. |
| * ripd.c (rip_output_process): If output interface is in simple |
| password authentication mode, we need space for authentication |
| data. |
| |
| 2001-02-01 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ripd.c (rip_nexthop_check): Fix multicast address nexthop check. |
| |
| * zebra-0.91 is released. |
| |
| 2001-01-27 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ripd.c (show_ip_rip): Show metric infinity route's timeout. |
| (rip_rte_process): If current route is metric infinity, route is |
| replaced with received rte. |
| (rip_redistribute_delete): When redistribute route is deleted, |
| perform poisoned reverse. |
| (rip_redistribute_withdraw): Likewise. |
| |
| 2001-01-25 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ripd.c (rip_response_process): RIPv2 routing table entry with |
| non directly reachable nexthop was dropped. The code is changed |
| to treat it as 0.0.0.0 nexthop. |
| (rip_destination_check): Check net 0 address destination. |
| (rip_nexthop_check): New function for checking nexthop address |
| validity. |
| |
| 2001-01-15 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ripd.c (rip_request_process): Triggered update only send changed |
| route. |
| |
| * rip_interface.c: Delete RIP_API part until new implementation |
| comes out. |
| |
| * rip_snmp.: Likewise. |
| |
| * rip_zebra.c: Likewise. |
| |
| * ripd.c: Likewise. |
| |
| 2001-01-11 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * rip_interface.c (rip_if_init): Remove HAVE_IF_PSEUDO part. |
| |
| 2001-01-09 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * zebra-0.90 is released. |
| |
| 2001-01-01 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ripd.h (RIP_VTYSH_PATH): Change "/tmp/ripd" to "/tmp/.ripd". |
| |
| 2000-12-25 David Lipovkov <davidl@nbase.co.il> |
| |
| * ripd.c (rip_rte_process): When a route is in garbage collection |
| process (invalid with metric 16) and a router receives the same |
| route with valid metric then route was not installed into zebra |
| rib, but only into ripd rib. Moreover , it will never get into |
| zebra rib, because ripd wrongly assumes it's already there. |
| (rip_redistribute_add): When doing redistribute into rip other |
| route (e.g. connected) and the same route exists in ripd rib we |
| changed it in place - bug. Now we don't forget to remove old route |
| from zebra. |
| (rip_timeout): When removing routes from zebra I made sure that we |
| remove route with the metric we have in zebra and not the new |
| one. It doesn't make a difference now,but could be significant |
| when multipath support is done. |
| |
| 2000-12-25 David Lipovkov <davidl@nbase.co.il> |
| |
| * rip_zebra.c (rip_metric_unset): Fix bug of metric value unset. |
| |
| 2000-11-25 Frank van Maarseveen <F.vanMaarseveen@inter.NL.net> |
| |
| * ripd.c (rip_request_process): Check passive flag of the |
| interface. |
| |
| 2000-11-23 Frank van Maarseveen <F.vanMaarseveen@inter.NL.net> |
| |
| * rip_interface.c (rip_multicast_join): When IP_ADD_MEMBERSHIP |
| failed do not set runnning flag to the interface. |
| |
| 2000-11-16 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ripd.c (rip_output_process): Memory leak related classfull |
| network generation is fixed. |
| |
| 2000-11-16 Frank van Maarseveen <F.vanMaarseveen@inter.NL.net> |
| |
| * rip_interface.c (if_check_address): Obsolete pointopoint address |
| check is removed. |
| |
| 2000-11-02 Frank van Maarseveen <F.vanMaarseveen@inter.NL.net> |
| |
| * rip_interface.c (if_check_address): Add pointopoint address |
| check. |
| (rip_interface_up): Add check for passive interface when interface |
| goes up. |
| |
| 2000-10-23 Jochen Friedrich <jochen@scram.de> |
| |
| * rip_snmp.c: rip_oid and ripd_oid are used in smux_open after it |
| is registered. So those variables must be static. |
| |
| 2000-10-19 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * rip_interface.c: Change to "no ip rip (send|receive)" command |
| accept version number argument. |
| |
| 2000-10-17 Akihiro Mizutani <mizutani@dml.com> |
| |
| * rip_routemap.c (route_set_ip_nexthop_compile): Change "match ip |
| next-hop" from IP address to access-list name. |
| |
| 2000-10-17 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * rip_peer.c: Change ot use linklist.c instaed of newlist.c. |
| |
| 2000-10-16 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * rip_offset.c: Change to use linklist.c instead of newlist.c. |
| |
| 2000-10-02 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * zebra-0.89 is released. |
| |
| 2000-09-26 Akihiro Mizutani <mizutani@dml.com> |
| |
| * rip_routemap.c (match_ip_nexthop): Add next-hop format check. |
| |
| 2000-09-18 David Lipovkov <dlipovkov@OpticalAccess.com> |
| |
| * rip_interface.c (ripd_api_get_if_rx_version): Corrects rip SNMP |
| and rip API functions dealing with rip version. |
| |
| * rip_snmp.c (Status_Valid): SNMPv2-TC TEXTUAL-CONVENTION. |
| |
| 2000-09-10 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * rip_snmp.c (rip2IfLookup): Use rip_ifaddr_lookup_next() instead |
| of rip_if_lookup_next(). |
| |
| * rip_interface.c (rip_enable_network_lookup): Interface enable |
| check by interface's address with /32 prefix. |
| |
| * ripd.c (rip_read): When RIP is configured with authentication |
| and no authentication in incoming packet, drop the packet. |
| |
| * rip_interface.c (rip_interface_reset): RIP_AUTH_SIMPLE_PASSWORD |
| is default mode of authentication. |
| (rip_interface_new): Likewise. |
| (no_ip_rip_authentication_mode): Likewise. |
| |
| * ripd.c (rip_read): Likewise. |
| |
| 2000-09-10 David Lipovkov <davidl@nbase.co.il> |
| |
| * rip_snmp.c: Set ASN_INTEGER v->type where it is needed. |
| |
| 2000-09-08 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ripd.c (rip_auth_simple_password): Simple password |
| authentication using key-chain. |
| (rip_write_rte): Likewise. |
| |
| * rip_interface.c (ip_rip_authentication_key_chain): Add check for |
| authentication string configuration. |
| |
| 2000-09-08 Akihiro Mizutani <mizutani@dml.com> |
| |
| * ripd.c (rip_write_rte): Add check for ri->auth_str. |
| |
| 2000-09-07 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ripd_api.h: New file is added. |
| |
| 2000-08-22 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ripd.c (rip_rte_process): rip_route_process() is renamed to |
| rip_rte_process() to clarify meanings of the function. |
| rip_route_process() is newly added to process RIP route selection. |
| |
| 2000-08-18 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ripd.c (rip_incoming_filter): Extract incoming filter code to |
| function from rip_route_process(). Add check for all interface |
| filter. |
| (rip_outgoing_filter): Extract incoming filter code to function |
| from rip_output_process(). Add check for all interface filter. |
| |
| * rip_zebra.c (rip_redistribute_clean): Reset redistribute status |
| when "no router rip" is performed. |
| |
| * rip_interface.c (rip_interface_clean): Reset interface's RIP |
| enable status. |
| |
| 2000-08-17 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ripd.c (rip_route_process): When metric infinity is received the |
| route is removed from service immediately. |
| (rip_timeout): Likewise. |
| (rip_garbage_collect): Do not delete route in garbage collection. |
| (rip_output_process): Check metric_out exceed metric infinity. |
| |
| * zebra-0.88 is released. |
| |
| 2000-08-15 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ripd.c (rip_distance_apply): Unlock node when there is matched |
| node. |
| |
| 2000-08-13 Akihiro Mizutani <mizutani@dml.com> |
| |
| * rip_routemap.c (match_ip_nexthop): Add check for IP address |
| validness. |
| (no_set_metric): Add new ALIAS. |
| |
| 2000-08-07 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ripd.h (struct rip ): Add distance. |
| |
| 2000-08-05 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * rip_zebra.c (rip_zebra_ipv4_add): Use new Zebra api to register |
| routes. Pass RIP metric value to zebra. |
| |
| 2000-08-02 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * rip_main.c (main): Make struct thread thread from global |
| variable to local variable in main. |
| |
| 2000-08-06 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ripd.c (rip_packet_dump): Add MD5 authentication dump function. |
| (rip_auth_md5): RIP MD5 authentication packet receive works. |
| |
| 2000-08-02 David Lipovkov <davidl@nbase.co.il> |
| |
| * rip_interface.c (rip_if_init): Install interface "pseudo" |
| commands. |
| (rip_interface_delete): Do not call if_delete() when interface is |
| pseudo interface. |
| |
| 2000-07-31 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * rip_interface.c (ip_rip_authentication_mode): "ip rip |
| authentication mode (md5|text)" is added. |
| (ip_rip_authentication_key_chain): "ip rip authentication |
| key-chain KEY-CHAIN" is added. |
| (rip_interface_clean): Clean all interface configuration. |
| (rip_interface_reset): Reset all interface configuration. |
| (rip_clean_network): Clean rip_enable_network. |
| |
| * ripd.h (struct rip_interface): Add key_chain member. |
| |
| * ripd.c: Include md5-gnu.h. |
| |
| 2000-07-30 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ripd.h (RIP_NO_AUTH): Change RIP_NO_AUTH value from 1 to 0. |
| |
| * ripd.c (rip_authentication): Use RIP_AUTH_SIMPLE_PASSWORD |
| instead of raw value 2. |
| (rip_write_rte): Likewise. |
| (rip_write_rte): Check ri->auth_type instead of ri->auth_str. |
| |
| 2000-07-30 David Lipovkov <davidl@nbase.co.il> |
| |
| * rip_interface.c (rip_if_down): Do not delete ZEBRA_ROUTE_KERNEL |
| route. |
| |
| 2000-07-27 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ripd.c (rip_update_process): Add "passive-interface" command. |
| |
| * ripd.h (struct rip_interface): Add passive member to struct |
| rip_interface. |
| |
| 2000-07-24 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * rip_interface.c (rip_if_init): Multiple RIP routes for one |
| prefix change. The codes are enclosed by #ifdef NEW_RIP_TABLE. |
| |
| 2000-07-24 Akihiro Mizutani <mizutani@dml.com> |
| |
| * rip_interface.c (rip_if_init): Use install_default() for |
| INTERFACE_NODE. |
| |
| 2000-07-24 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ripd.c: First update timer will be invoked in two seconds. |
| |
| 2000-07-09 Jochen Friedrich <jochen@scram.de> |
| |
| * rip_snmp.c: Local function definitions to static. Add INTEGER |
| ASN_INTEGER and TIMETICKS ASN_TIMETICKS definition. |
| (rip2PeerLookup): Peer with domain lookup implemented. |
| (rip2PeerTable): Temporary disable RIP2PEERLASTUPDATE value |
| support due to unknown SNMP agent startup time. |
| |
| 2000-07-05 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ripd.h: Sweep obsolete definitions. |
| |
| * rip_interface.c (rip_split_horizon): Add "ip split-horizon" |
| command. |
| |
| * ripd.c (rip_output_process): Remove split_horizon argument. |
| (rip_update_process): Likewise. |
| |
| * ripd.h (struct rip_interface): Add split_horizon flag to struct |
| rip_interface. |
| |
| 2000-07-04 Akihiro Mizutani <mizutani@dml.com> |
| |
| * ripd.c (rip_version): Change VERSION to <1-2>. |
| Add "no version" command. |
| |
| 2000-07-03 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * rip_zebra.c (rip_redistribute_type_metric): "redistribute TYPE |
| metric <0-16>" command is added. |
| |
| * rip_routemap.c (route_set_metric): Set metric_set when metric is |
| modified. |
| |
| * ripd.h (struct rip_info): To check route-map set metric or not, |
| new member metric_set is added to struct rip_info. |
| |
| * ripd.c (rip_route_process): Move metric handling code from |
| rip_response_process() to rip_route_process(). |
| (rip_output_process): Set output offset-list metric. |
| |
| 2000-07-02 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * rip_offset.c (rip_offset_list): New file for offset-list. |
| |
| 2000-07-02 Akihiro Mizutani <mizutani@dml.com> |
| |
| * ripd.h (struct rip ): Add default_metric. |
| |
| * ripd.c (rip_default_metric): "default-metric <1-16>" command is |
| added. |
| (config_write_rip): Change configuration order. |
| |
| * rip_zebra.c: Fix help strings. |
| |
| 2000-07-02 David Lipovkov <davidl@nbase.co.il> |
| |
| * rip_interface.c (rip_if_init): Add IF_DELETE_HOOK. |
| |
| 2000-07-01 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ripd.c (rip_output_process): If specified route-map does not |
| exist, it treated as deny all. |
| |
| 2000-06-30 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * rip_routemap.c (rip_route_map_init): Call rip_route_map_update |
| when route-map is deleted. |
| |
| 2000-06-28 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * rip_routemap.c (set_metric): For consistency with bgpd's set |
| metric, value range is set to <0-4294967295>. |
| |
| 2000-06-28 David Lipovkov <davidl@nbase.co.il> |
| |
| * rip_routemap.c (rip_route_map_update): Add check for rip is |
| enabled or not for avoid core dump. |
| |
| * rip_debug.c (debug_rip_packet_direct): Fix bug of setting |
| rip_debug_packet flag. |
| |
| 2000-06-13 David Lipovkov <davidl@nbase.co.il> |
| |
| * rip_interface.c (rip_interface_delete): All work is done in |
| rip_if_down(). |
| |
| 2000-06-06 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ripd.c (rip_redistribute_delete): Fix bug of missing |
| route_unlock_node() when redistribute route is not found. |
| |
| 2000-06-05 Akihirof Mizutani <mizutani@dml.com> |
| |
| * rip_debug.c (rip_debug_init): Disable show debugging in |
| VIEW_NODE like other protocol daemon. |
| |
| * rip_routemap.c: Change command argument to more comprehensive. |
| |
| METRIC -> <0-16> |
| IFNAME -> WORD |
| IP_ADDR -> A.B.C.D |
| ACCSESS_LIST -> WORD |
| |
| 2000-06-05 David Lipovkov <davidl@nbase.co.il> |
| |
| * rip_interface.c (rip_interface_delete): Delete all routes |
| include static and kernel through the interface , because even if |
| the interface is added again there is no guarantee that it will |
| get the same ifindex as before. |
| |
| 2000-05-31 Akihirof Mizutani <mizutani@dml.com> |
| |
| * rip_debug.c: Fix rip debug help string. |
| |
| 2000-04-27 Mirko Karanovic <mkaranov@torsel.alcatel.com> |
| |
| * rip_interface.c (rip_interface_down): Remove interface from |
| multicast group when interface goes down. |
| |
| 2000-04-03 David Lipovkov <davidl@nbase.co.il> |
| |
| * rip_interface.c (rip_interface_down): Implemented rip functions |
| for interface up/down events: rip_interface_up() and |
| rip_interface_down() |
| |
| 2000-03-16 David Lipovkov <davidl@nbase.co.il> |
| |
| * rip_zebra.c (rip_zclient_init): Added rip functions for |
| interface up/down events. |
| |
| 2000-02-15 Hidetoshi Shimokawa <simokawa@sat.t.u-tokyo.ac.jp> |
| |
| * ripd.c (rip_write_rte): "set metic" in route-map has no effect |
| for RIPv1 in ripd. It worked fine for RIPv2. |
| |
| 2000-01-17 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ripd.c (show_ip_protocols_rip): Fix bug of "show ip protocls" |
| mis-display RIP version. |
| |
| * ripd.h (struct rip_peer): Add timeout thread to rip_peer |
| structure. |
| |
| 2000-01-16 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * rip_peer.c: Add new file for supporting RIP peer. |
| |
| 1999-12-26 David Lipovkov <davidl@nbase.co.il> |
| |
| * ripd.c (rip_authentication): RIP authantication string is 16 |
| bytes long. |
| |
| 1999-12-10 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ripd.c (rip_read): Add check for minimum packet length. |
| Authentication check is moved from rip_process_response() to |
| rip_read(). Patch from David Lipovkov <davidl@nbase.co.il> is |
| applied then add rte number check by Kunihiro Ishiguro |
| <kunihiro@zebra.org>. |
| |
| 1999-12-07 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ripd.c (rip_response_process): In case of packet is RIPv2 and |
| network is non zero and netmask is zero, apply netmask rule as |
| same as RIPv1. |
| |
| 1999-11-06 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ripd.c (rip_timers): Fix bug of timers basic argument format. |
| |
| 1999-11-03 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * rip_snmp.c (rip2IfConfAddress): Forgot to include |
| RIP2IFCONFDOMAIN. |
| |
| 1999-10-28 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ripd.h (struct rip_peer): New structure added. |
| |
| 1999-10-26 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * rip_zebra.c (rip_zebra_ipv4_add): Increment |
| rip_global_route_changes when route change occur. |
| (rip_zebra_ipv4_delete): Likewise. |
| |
| * ripd.c (rip_request_process): Increment rip_global_queries when |
| reply to the query is sent. |
| |
| 1999-10-25 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * rip_debug.c (rip_debug_reset): Reset function added. |
| |
| * ripd.c (rip_update_process): Logging bug is fixed. |
| |
| 1999-10-10 Marc Boucher <marc@mbsi.ca> |
| |
| * ripd.c (config_write_rip): Add config_write_distribute() call. |
| |
| 1999-09-29 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ripd.c (rip_distribute_update): Fix bug of access-list |
| prefix-list updates. |
| |
| 1999-09-10 VOP <vop@unity.net> |
| |
| * rip_zebra.c: Add redistribute route-map feature. |
| |
| 1999-09-10 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ripd.c (rip_response_process): Add check for given prefix is |
| given mask applied one. |
| |
| 1999-09-03 VOP <vop@unity.net> |
| |
| * rip_interface.c (rip_interface_multicast_set): Bug fix about |
| setting multicast interface. |
| |
| 1999-09-02 VOP <vop@unity.net> |
| |
| * rip_routemap.c: New file added. |
| |
| 1999-09-02 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ripd.c (show_ip_protocols_rip): Show next update time. |
| (show_ip_protocols_rip): Show redistribute information. |
| |
| 1999-08-25 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * RIPv2-MIB.txt: New file added. |
| |
| * rip_snmp.c: New file added. |
| |
| 1999-08-24 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * rip_interface.c (ip_rip_authentication_string): RIPv2 |
| authentication command is added. |
| |
| 1999-08-23 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * rip_interface.c (rip_interface_multicast_set): Process of |
| setting IP_MULTICAST_IF on specific interface. |
| |
| * ripd.c (rip_read): Add packet size check. |
| |
| 1999-08-16 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ripd.c (rip_request_process): Fill in RIP_METRIC_INFINITY with |
| network byte order using htonl (). |
| (rip_response_process): Pass host byte order address to IN_CLASSC |
| and IN_CLASSB macro. |
| |
| 1999-08-08 davidm@nbase.co.il (David Mozes) |
| |
| * rip_zebra.c (rip_zebra_read_ipv4): Fix split horizon problem. |
| |
| 1999-07-03 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ripd.c (rip_timer_set): Function added. |
| |
| 1999-07-01 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * rip_debug.c: New file added. |
| rip_debug.h: New file added. |
| |
| 1999-07-01 Rick Payne <rickp@rossfell.co.uk> |
| |
| * rip_zebra.c (zebra_init): Install standard commands to |
| ZEBRA_NODE. |
| |
| 1999-06-01 David Luyer <luyer@ucs.uwa.edu.au> |
| |
| * ripd.c (rip_process_route): Add support for RIP version 1. |
| |
| 1999-05-29 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * rip_zebra.c: Change to use lib/zclient.[ch]. |
| |
| 1999-05-20 Carlos Alberto Barcenilla <barce@frlp.utn.edu.ar> |
| |
| * ripd.c (rip_add_route): Change the existance route's metric check |
| to the condition specified by RFC2453. |
| |
| 1999-05-17 Carlos Alberto Barcenilla <barce@frlp.utn.edu.ar> |
| |
| * ripd.c (rip_process_route): Add the if metric to the route metric. |
| |
| * ripd.c (rip_add_route): Deleted add if metric to the route. |
| |
| 1999-05-16 Carlos Alberto Barcenilla <barce@frlp.utn.edu.ar> |
| |
| * rip_interface.c (if_valid_neighbor): New function. |
| |
| * ripd.c (rip_process_route): Added check whether the datagram |
| is from a valid neighbor. |
| |
| 1999-05-15 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ripd.c (rip_process_route): Set interface pointer to rinfo. |
| |
| 1999-05-15 Carlos Alberto Barcenilla <barce@frlp.utn.edu.ar> |
| |
| * ripd.c (rip_check_address): Unicast and not net 0 or 127 check |
| added. |
| |
| 1999-05-14 Stephen R. van den Berg <srb@cuci.nl> |
| |
| * rip_main.c (signal_init): SIGTERM call sigint. |
| (sigint): Loggging more better message. |
| |
| 1999-05-10 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ripd.c (rip_add_route): Fix previous route_unlock_node() chenge. |
| |
| * rip_main.c (main): Change default zlog output to ZLOG_STDOUT for |
| debugging. |
| |
| 1999-05-09 Patrick Koppen <koppen@rhrk.uni-kl.de> |
| |
| * rip_interface.c (rip_request): Fix old semantics for fetching |
| connected address. |
| |
| * ripd.c (rip_add_route): Update timer when the route is updated. |
| |
| 1999-05-09 Carlos Alberto Barcenilla <barce@frlp.utn.edu.ar> |
| |
| * rip_zebra.c (struct zebra): Add ridist_static, ridist_connect, |
| redist_rip, redist_ripng. |
| |
| * rip_zebra.c (zebra_create): Updated for current zebra method. |
| |
| * ripd.c (rip_add_route): Add missing route_unlock_node(). |
| |
| 1999-05-03 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ripd.c (rip_add_route): Add metric check. Reported by Carlos |
| Alberto Barcenilla <barce@frlp.utn.edu.ar>. |
| |
| 1999-02-18 Peter Galbavy <Peter.Galbavy@knowledge.com> |
| |
| * syslog support added |
| |
| 1998-12-13 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ripd.c (rip_announce_func): Apply new lib functions. |
| |
| 1998-12-09 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ripd.c (config_write_rip): Delete vector v argument. |
| * rip_zebra.c (config_write_zebra): Likewise. |
| * rip_interface.c (interface_config_write): Likewise. |
| |
| 1998-09-07 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * rip_announce.c (rip_rib_close): When ripd terminates delete all |
| added route. |
| |
| 1998-09-01 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * rip_interface.c: return read packet size. |
| |
| 1998-05-18 Yamshita TAKAO <jargon@lares.dti.ne.jp> |
| |
| * ripd.h: Modify for compile on Solaris. |
| |
| 1998-05-07 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ripd.c: DEFUN function return CMD_SUCCESS. |
| change xmalloc to XMALLOC macro. |
| |
| 1998-05-03 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * rip_main.c: change CONFDIR to SYSCONFDIR. |
| |
| 1998-05-01 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * .cvsignore: added. |
| |
| 1998-02-04 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * rip_interface.c (config_write_interface): correct ADVERTISE spell. |
| |
| * rip_main.c (main): add usage() and make cleanup. |
| |
| 1998-01-05 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ripd.c (rip_version): add rip version command. |
| |
| 1998-01-04 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * rip_interface.c (zebra_get_interface): added to get |
| interface's information. |
| |
| * ChangeLog: create. |