| 2008-07-02 MIYAJIMA Mitsuharu <miyajima.mitsuharu@anchor.jp> |
| |
| * CMD_AS_RANGE was being used inside command strings, and thus |
| not being expanded, fix by dequoting. |
| |
| 2007-06-20 Nicolas Deffayet <nicolas@deffayet.com> |
| |
| * vtysh.c: (vtysh_write_terminal) Write 'end' when done, |
| to be consistent with telnet vty, and expected by tools |
| like rancid. |
| |
| 2007-05-01 David L Stevens <dlstevens@us.ibm.com> |
| |
| * vtysh/extract.pl.in: added VTYSH_ZEBRA flag for route-map and |
| plist |
| * vtysh/Makefile.am: added zebra_routemap.c |
| * vtysh/vtysh.h: added VTYSH_ZEBRA flag to VTYSH_RMAP |
| |
| 2007-04-28 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * vtysh.c: (vtysh_log_timestamp_precision, |
| no_vtysh_log_timestamp_precision) Implement new log timestamp |
| precision commands: send to all daemons. |
| (vtysh_init_vty) Install new log timestamp precision commands. |
| |
| 2007-02-12 Juergen Kammer <j.kammer@eurodata.de> |
| * extract.pl: AS4 compatibility for router bgp ASNUMBER |
| * extract.pl.in: AS4 compatibility for router bgp ASNUMBER |
| * vtysh.c: AS4 compatibility for router bgp ASNUMBER |
| |
| 2006-07-27 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * vtysh_main.c: (usage) Add new -d and -E options. And note that |
| -c can be used multiple times, possibly with embedded linefeeds. |
| (longopts) Add new -d and -E options. |
| (main) Add new -d and -E options, and create a linked list to |
| support multiple -c options. Do not call vtysh_connect_all until |
| after vtysh_read_config(config_default) and vtysh_auth have |
| succeeded. This prevents the vtysh.conf file from configuring |
| any daemons, and it ensures that authentication has been passed |
| before we send any commands to any daemons. Call vtysh_connect_all |
| with any daemon name supplied with -d. If it is unable to connect |
| to any daemons, issue an error message and exit immediately. |
| When used in -c mode, call vtysh_execute("enable") before |
| executing the commands in order to match interactive behavior. |
| And detect embedded linefeed chars in -c commands and break them up |
| appropriately. |
| * vtysh.h: (vtysh_connect_all) Fix proto to reflect new |
| daemon_name argument, and that it now returns an integer -- the |
| number of daemons to which we were able to connect. |
| * vtysh.c: (vtysh_connect_all) Add a new daemon_name argument. |
| If supplied, connect only to that daemon. And return |
| the number of daemons to which we were able to connect. |
| (vtysh_prompt): Performance enhancement -- make struct utsname |
| static so we call uname to get the hostname only once. |
| |
| 2006-05-24 Paul Jakma <paul.jakma@sun.com> |
| |
| * vtysh.c: (general) Add 'show memory' command. |
| |
| 2006-05-21 Paul Jakma <paul.jakma@sun.com> |
| |
| * vtysh.c: (vtysh_show_logging_cmd) Suppress output for daemons |
| which are not running (Andrew Schorr). |
| |
| 2006-05-17 Paul Jakma <paul.jakma@sun.com> |
| |
| * vtysh.c: (general) Add 'show logging' command. |
| |
| 2006-01-11 Erik Smit <zoiah@zoiah.net> |
| |
| * vtysh.c: (vtysh_config_from_file) fix regression from |
| a previous cleanup, vtysh_client.flags and cmd->daemon are |
| bitwise flags, bitwise & was meant to be used. Fixes breakage |
| of integrated config file reading. |
| |
| 2005-09-15 Hasso Tepper <hasso at quagga.net> |
| |
| * vtysh.c: Fix warning by casting rl_bind_key 2. argument correctly. |
| * extract.pl.in: Fix warning - add isisd/topology to the includes. |
| |
| 2005-08-22 Hugo Santos <hsantos@av.it.pt> |
| |
| * vtysh.c: Add support for BGP_IPV6M_NODE |
| |
| 2005-07-12 Christian Hammers <ch@debian.org> |
| |
| * vtysh_user.c: rename struct user to struct vtysh_user to avoid |
| clashes with sys/user.h on Linux/ARM. |
| |
| 2005-04-07 Hasso Tepper <hasso at quagga.net> |
| |
| * Makefile.am: Remove rebuild4 target, it's not used any more by build |
| procedure. Define vtysh_cmd_FILES. Use EXTRA_DIST. |
| * extract.pl.in: Ignore "router zebra". |
| |
| 2005-03-28 Hasso Tepper <hasso at quagga.net> |
| |
| * extract.pl.in: Use SNMP_INCLUDES to avoid warnings if compiling with |
| snmp support. |
| |
| 2005-03-09 Hasso Tepper <hasso at quagga.net> |
| |
| * vtysh_config.c: Move password commands to the AAA_NODE. It |
| quarantees that they will appear after SERVICE_NODE to make sure |
| that encrypted passwords will work ("service password-encryption" |
| command). |
| |
| 2005-01-28 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * vtysh.h: Remove obsolete VTYSH_INDEX_* defines. Fix many prototypes |
| for functions with no arguments (must specify argument list as void). |
| * vtysh.c: Enhance vtysh_client array to include the daemon's name |
| and bitmask and socket path (in addition to the fd). This allows |
| us to use loop constructs for various operations that need to be |
| applied to all client daemons, and it facilitates better error |
| messages. Also fix some prototypes with void argument lists. |
| (vclient_close) Issue a warning message indicating which daemon's |
| socket is being closed. |
| (vtysh_execute_func,vtysh_config_from_file) Use a for loop to |
| call vtysh_client_execute. |
| (vtysh_write_terminal,write_config_integrated) Use a for loop to |
| call vtysh_client_config. |
| (vtysh_write_memory) Use a for loop to call vtysh_client_execute. |
| (vtysh_show_daemons) Use a for loop. |
| (vtysh_connect) The struct vtysh_client is now statically initialized, |
| so do not initialize it here. |
| (vtysh_connect_all) Use a for loop to call vtysh_connect. Set |
| ripd_client pointer for use in vtysh_exit_ripd_only. |
| |
| 2005-01-23 Hasso Tepper <hasso at quagga.net> |
| |
| * vtysh.conf.sample: Fix typo "integrated-vtysh-conf" -> |
| "integrated-vtysh-config". |
| * vtysh/vtysh.c: Implement walkup in node tree for vtysh as it |
| already works in vty. |
| |
| 2005-01-10 Hasso Tepper <hasso at quagga.net> |
| |
| * vtysh.c: Reflect changes in lib. cmd_execute_command() should know |
| now that it's called from vtysh and must not attempt to walk up in |
| the node tree. |
| |
| 2004-12-22 Hasso Tepper <hasso at quagga.net> |
| |
| * vtysh_config.c: No delimiter between "ip forwarding" and "ipv6 |
| forwarding". Show common router-id before router nodes. Fix router |
| bgp node parsing. Move debug commands into debug node and no |
| delimiter between lines there. |
| |
| 2004-12-09 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * vtysh.c: (vtysh_connect) No reason to call geteuid and getegid, |
| the results were never used. |
| |
| 2004-12-07 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * vtysh.c: Make several functions static instead of global. |
| Added several commands to support destination-specific logging levels. |
| (vtysh_completion) This function is unused, so comment it out. |
| |
| 2004-11-11 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * vtysh.c: (vtysh_client_execute) Fix flaws in detecting trailing |
| '\0' chars and command return code. |
| |
| 2004-10-28 Hasso Tepper <hasso at quagga.net> |
| |
| * vtysh.c: "show running-daemons" broke users habits who are using |
| "sho run" to view running configuration. Changed it to "show |
| daemons". |
| |
| 2004-10-20 Hasso Tepper <hasso at quagga.net> |
| |
| * vtysh.c: Don't popen pager if command is "exit". Fixes "vtysh screws |
| up my terminal if I exit" issue. |
| |
| 2004-10-13 Hasso Tepper <hasso at quagga.net> |
| |
| * extract.pl.in: All daemons can use both IPv6 and IPv4 access lists |
| to limit access to vty. |
| |
| 2004-10-11 Paul Jakma <paul@dishone.st> |
| |
| * vtysh.c: (vtysh_client_execute) fix the sync fix. The 4th and |
| final sync byte is not ASCII NULL, it's actually a status integer, |
| and only ASCII NULL if CMD_SUCCESS is returned by daemon. |
| Fix pointed out by Hasso. |
| |
| 2004-10-11 Hasso Tepper <hasso at quagga.net> |
| |
| * vtysh.c, vtysh_user.c: Make more strings const. |
| |
| 2004-10-07 Hasso Tepper <hasso at quagga.net> |
| |
| * vtysh.c, vtysh.h, vtysh_config.c, vtysh_main.c: Fix compiler |
| warnings: make strings const, signed -> unsigned, remove unused |
| variables. |
| * vtysh_config.c: Fix crash introduced with previous patch. |
| |
| 2004-10-03 Hasso Tepper <hasso at quagga.net> |
| |
| * vtsyh_main.c: Enter into enable node by default. Disable node doesn't |
| make sense if we don't have any authentication for enable. |
| * vtysh.c: Implement "show running-daemons" command. |
| * vtysh.c: Use either integrated conf or daemon conf not both. Move |
| configuration command into "service" level. |
| * vtysh.c: Remove "write ..." commands from other nodes than enable. |
| We have "do ..." extension for that. |
| * vtysh_config.c, vtysh.c: Integrate vtysh configuration into |
| integrated one. |
| * vtysh_config.c: Use FORWARD_NODE and SERVICE_NODE vty nodes. |
| * vtysh_config.c: Make "service" lines unique in integrated config. |
| * vtysh.c: Make "service password-encryption" command work in vtysh. |
| * vtysh_config.c, vtysh.c, Makefile.am, extract.pl.in: Introduce line |
| vty commands in vtysh. Parse lib/vty.c for commands, but ignore |
| commands that don't make sense in vtysh. Closes Bugzilla #104. |
| * vtysh.c: Make "[enable] password" commands work in vtysh. Behavior |
| is similar to "log" commands - vtysh just passes commands to all |
| daemons. |
| * vtysh_main.c, vtysh_config.c, vtysh.h: Remove any code dealing with |
| configuration files specified from command line. We read/write files |
| from/to system location only (ie. remove -f again). |
| * Makefile.am: Parse zebra/router-id.c. |
| |
| 2004-09-26 Hasso Tepper <hasso at quagga.net> |
| |
| * vtysh.c: Fix compiler warning. |
| |
| 2004-09-17 Paul Jakma <paul@dishone.st> |
| |
| * vtysh.c: (vtysh_client_execute) trailling NULLs can be arbitrarily |
| split across reads, dont get confused by this and block forever. |
| |
| 2004-09-13 Paul Jakma <paul@dishone.st> |
| |
| * Makefile.am: extract.pl isnt in srcdir, it's always in the builddir. |
| remove zebra/irdp.c from list - dead. |
| * extract.pl.in: match on end of filenames, filename could contain |
| various preamble due to out of tree builds. Substitute in the |
| autoconf srcdir/builddir paths for includes to cpp. |
| |
| 2004-08-28 Hasso Tepper <hasso at quagga.net> |
| |
| * vtysh_main.c: Rename signal handling functions not to conflict |
| with functions from lib/sigevent.c. |
| |
| 2004-08-27 Hasso Tepper <hasso at quagga.net> |
| |
| * vtysh.c: Make "terminal length <0-512>" command work in vtysh. |
| |
| 2004-08-27 Hasso Tepper <hasso at quagga.net> |
| |
| * vtysh.c: Enable using ssh from ENABLE_NODE. |
| * vtysh_config.c: Make enable password uniq lines appear only once in |
| configuration. |
| * vtysh_main.c, vtysh_config.c, vtysh.h: Remove useless code which |
| searched configuration files from current directory. Add -f to |
| specify conf from command line. |
| |
| 2004-08-26 Hasso Tepper <hasso at quagga.net> |
| |
| * *.c: Cosmetical changes - strip long lines, fix multiline comments |
| style, indentation fixes, remove useless comments. |
| * vtysh.h: define VTYSH_INTERFACE. |
| * vtysh.c: Use VTYSH_INTERFACE where possible. Added some related TODO |
| items. |
| * vtysh.c: Move things around a little to reduce spaghetti mess. |
| * Makefile.am: Parse only needed files from zebra daemon while |
| building vtysh_cmd.c file to supress warnings. |
| |
| 2004-06-30 Greg Troxel <gdt@poblano.ir.bbn.com> |
| |
| * extract.pl.in: Rename from extract.pl, with @PERL@. |
| |
| * Makefile.am: Add vtysh_cmds.c to CLEANFILES. |
| |
| 2004-06-20 Hasso Tepper <hasso@estpak.ee> |
| |
| * extract.pl: Zebra daemon has access lists as well. |
| |
| 2004-05-10 Hasso Tepper <hasso@estpak.ee> |
| |
| * vtysh.c: Workaround for most hated vtysh bug - Bugzilla #58. |
| |
| 2004-04-06 Hasso Tepper <hasso@estpak.ee> |
| |
| * vtysh_main.c: Don't save command to history if last command already |
| there is same. |
| * vtysh_main.c: Replace -e with -c. |
| * vtysh_main.c: Fix help. |
| |
| 2004-03-04 Hasso Tepper <hasso@estpak.ee> |
| |
| * vtysh.c: Remove using PAGER. |
| |
| 2004-01-15 Paul Jakma <paul@dishone.st> |
| |
| * vtysh_config.c: Fix up strlen to use correct string. |
| |
| 2003-12-23 Hasso Tepper <hasso@estpak.ee> |
| |
| * Makefile.am extract.pl vtysh.c vtysh.h vtysh_config.c: |
| isisd integration to vtysh. |
| |
| 2003-05-01 Sergiy Vyshnevetskiy <serg@vostok.net> |
| |
| vtysh.c: Program shouldn't terminate on pager execution failure |
| vtysh_user.c: configure support for openpam (freebsd5.0) |
| |
| 2003-04-19 Hasso Tepper <hasso@estpak.ee> |
| |
| * extract.pl vtysh.c vtysh.h: sync daemon's route-map commands to |
| have same syntax |
| |
| 2002-09-30 Paul Jakma <paulzebra@rs250.org> |
| |
| * vtysh.c: add 'write-config (integrated|daemon)' option |
| to specifiy whether write config commands should write |
| integrated Zebra.conf file and/or per daemon files. |
| Defaults to per daemon, unless this is turned off. |
| |
| 2002-07-07 Kunihiro Ishiguro <kunihiro@ipinfusion.com> |
| |
| * zebra-0.93 released. |
| |
| 2001-08-19 Kunihiro Ishiguro <kunihiro@ipinfusion.com> |
| |
| * zebra-0.92a released. |
| |
| 2001-08-15 Kunihiro Ishiguro <kunihiro@ipinfusion.com> |
| |
| * zebra-0.92 released. |
| |
| 2001-02-20 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vtysh.c (vtysh_client_config): Do not set bufsz to 120. |
| Suggested by: Matthew Grant <grantma@anathoth.gen.nz>. |
| |
| 2001-02-15 Hideto Yamakawa <yamakawa@dml.com> |
| |
| * vtysh.c (vtysh_client_execute): Call fflush after fprintf. |
| |
| * vtysh_config.c (vtysh_config_dump): Use VTYSH_PAGER if defined. |
| |
| 2001-02-14 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vtysh.c (vtysh_execute_func): Add fflush before pclose. |
| |
| 2001-02-10 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vtysh.c: VTY shell pager name. When environment variable |
| VTYSH_PAGER is defined, use it as VTY shell pager. |
| |
| 2001-02-09 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vtysh.c (vtysh_execute_func): Add pager argument for test of |
| pager invocation. |
| |
| 2001-02-08 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * extract.pl: Add -DHAVE_CONFIG_H option to cpp. |
| |
| 2001-02-08 Matthew Grant <grantma@anathoth.gen.nz> |
| |
| * vtysh.c (vtysh_client_config): Use sysconf to determine output |
| buffer size. |
| (vtysh_write_memory): Set umask 0077. |
| (vtysh_connect): Check permission to the socket. |
| |
| 2001-02-01 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * zebra-0.91 is released. |
| |
| 2001-01-31 Michael Rozhavsky <mrozhavsky@opticalaccess.com> |
| |
| * vtysh.c (new_completion): Fix problem of appending space when |
| completion is executed. |
| |
| 2001-01-23 Akihiro Mizutani <mizutani@dml.com> |
| |
| * vtysh.c (vtysh_write_terminal): "write terminal" to all node. |
| |
| 2001-01-15 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vtysh.c (vtysh_execute): Fix unconditional lock by other VTY. |
| Suggested by Hideto Yamakawa <yamakawa@dml.com>. |
| |
| 2001-01-09 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * zebra-0.90 is released. |
| |
| 2001-01-07 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vtysh.h (ZEBRA_PATH): Fix new vtysh path. Reported by "Matt |
| Ranney" <mjr@ranney.com> |
| |
| 2000-11-06 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vtysh.c (DEFUNSH): Add "address-family vpnv4" DEFUNSH. |
| |
| 2000-10-23 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vtysh.c (execute_command): Add two arguemnt support for |
| executing child process. |
| (vtysh_telnet_port): New command "telnet WORD PORT" is added. |
| |
| 2000-10-23 Akihiro Mizutani <mizutani@dml.com> |
| |
| * vtysh.c (vtysh_write_memory): Display [OK] when configuration is |
| saved without problem. |
| |
| 2000-10-20 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vtysh.c (vtysh_config_from_file): "key chain" command with -b |
| flag problem is fixed. |
| |
| 2000-10-17 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vtysh_user.c: Change to use linklist.c. |
| |
| 2000-10-02 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * Makefile.am (noinst_HEADERS): Add vtysh_user.h. |
| |
| * zebra-0.89 is released. |
| |
| 2000-09-22 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vtysh_main.c: Declare thread master. |
| |
| 2000-08-25 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vtysh_main.c (main): Add missing --help procudure. Reported by |
| Patrick Rother <krd@roka.net>. |
| |
| 2000-08-22 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vtysh.c (DEFUNSH): "interface IFNAME" works. |
| |
| 2000-08-20 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vtysh_user.c: Change name from vtysh_pam.c. |
| |
| * vtysh.conf.sample: New file for vtysh configuration. |
| |
| 2000-08-19 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vtysh_pam.c (vtysh_pam): New file for PAM. |
| |
| 2000-08-17 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * zebra-0.88 is released. |
| |
| 2000-08-02 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * Makefile.am (vtysh_LDADD): Remove -lreadline and -lncurses. |
| |
| * vtysh.c (vtysh_connect): Use AF_UNIX instead of AF_LOCAL for |
| backward compatibility. |
| |
| 2000-07-09 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * extract.pl: Change regexp to match DEFUN and ALIAS at the same |
| time. |
| |
| 2000-07-05 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vtysh.c (signal_init): Ignore SIGPIPE signal. |
| |
| 2000-07-04 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * extract.pl: ALIAS command can be extracted by extract.pl. |
| |
| 2000-07-03 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * extract.pl: Fix scalar and array semantics. |
| |
| * vtysh.c (vtysh_telnet): Add "telnet" client command. |
| |
| 2000-07-02 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vtysh.c (main): Add -e flag for passing command from arugment. |
| (vtysh_ping): Add "ping" command for test of command execution. |
| (init_node): Add "traceroute" command. |
| (vtysh_start_shell): Add "start-shell", "start-shell bash", |
| "start-shell zsh". |
| (sigint): Add check for execute_flag for avoid duplicate prompt. |
| |
| 2000-06-28 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vtysh.c: New file for vty shell. |
| * vtysh.h: Likewise. |
| * extract.pl: Likewise. |
| * vtysh_cmd.c: Generate by extract.pl. |