| .TH ZEBRA 8 "July 2000" "Zebra" "Version 0.88" |
| |
| .SH NAME |
| zebra \- a routing manager for use with associated components |
| |
| .SH SYNOPSIS |
| .B zebra |
| [ |
| .B \-bdhklrv |
| ] |
| [ |
| .B \-f config-file |
| ] |
| [ |
| .B \-i pid-file |
| ] |
| [ |
| .B \-P port-number |
| ] |
| |
| .SH DESCRIPTION |
| .B zebra |
| is a routing manager that implements the |
| .B zebra |
| route engine. |
| .B zebra |
| supports RIPv1, RIPv2, RIPng, OSPF, OSPF6, BGP4+, and BGP4-. |
| |
| |
| .SH OPTIONS |
| |
| .TP |
| \fB\-b\fR, \fB\-\-batch\fR |
| Runs in batch mode, \fBzebra\fR parses its config and exits. |
| |
| .TP |
| \fB\-d\fR, \fB\-\-daemon\fR |
| Runs in daemon mode, forking and exiting from tty. |
| |
| .TP |
| \fB\-f\fR, \fB\-\-config-file \fR\fIconfig-file\fR |
| Specifies the config file to use for startup. If not specified this option will likely default to \fB\fI/usr/local/etc/zebra.conf\fR. |
| |
| .TP |
| \fB\-h\fR, \fB\-\-help\fR |
| A brief message. |
| |
| .TP |
| \fB\-i\fR, \fB\-\-pid_file \fR\fIpid-file\fR |
| When zebra starts its process idenifier is written to |
| \fB\fIpid-file\fR. The init system uses the recorded PID to stop or |
| restart zebra. The likely default is \fB\fI/var/run/zebra.pid\fR. |
| |
| .TP |
| \fB\-k\fR, \fB\-\-keep_kernel\fR |
| On startup, don't delete self inserted routes. |
| |
| .TP |
| \fB\-l\fR, \fB\-\-log_mode\fR |
| Turn verbose logging on. |
| |
| .TP |
| \fB\-P\fR, \fB\-\-vty_port \fR\fIport-number\fR |
| Specify the port that the zebra VTY will listen on. This defaults to |
| 2602, as specified in \fB\fI/etc/services\fR. |
| |
| .TP |
| \fB\-r\fR, \fB\-\-retain\fR |
| When the program terminates, retain routes added by \fBzebra\fR. |
| |
| .TP |
| \fB\-v\fR, \fB\-\-version\fR |
| Print the version and exit. |
| |
| |
| .SH COMMANDS |
| |
| \fB table [TABLENO] \fR -- for use with multi-table kernels |
| |
| \fB ip route [NETWORK] [GATEWAY] \fR |
| \fB ipv6 route [NETWORK] [GATEWAY] \fR |
| |
| \fB show ip route \fR |
| \fB show ipv6 route \fR |
| \fB show interface \fR |
| \fB show ipforward \fR |
| \fB show ipv6forward \fR |
| |
| .TP |
| \fB interface [IFNAME] \fR |
| \fB shutdown \fR |
| \fB no shutdown \fR |
| \fB ip address [IP-ADDRESS] \fR |
| \fB description [DESCRIPTION] \fR |
| \fB multicast \fR |
| \fB no multicast \fR |
| |
| |
| .SH FILES |
| |
| .TP |
| .BI /usr/local/sbin/zebra |
| The default location of the |
| .B zebra |
| binary. |
| |
| .TP |
| .BI /usr/local/etc/zebra.conf |
| The default location of the |
| .B zebra |
| config file. |
| |
| .TP |
| .BI $(PWD)/zebra.log |
| If the |
| .B zebra |
| process is config'd to output logs to a file, then you will find this |
| file in the directory where you started \fBzebra\fR. |
| |
| |
| .SH WARNING |
| This man page is intended as a quick reference for command line options, and for config file commands. The definitive document is the Info file \fBzebra\fR. |
| |
| |
| .SH DIAGNOSTICS |
| The zebra process may log to standard output, to a VTY, to a log file, or through syslog to the system logs. |
| .B zebra |
| supports many debugging options, see the Info file, or the source for details. |
| |
| |
| .SH "SEE ALSO" |
| References to other related man pages: |
| |
| ripngd(8), ospfd(8), ospf6d(8), bgpd(8), zebra(8), vtysh(1) |
| |
| |
| |
| .SH BUGS |
| .B zebra |
| eats bugs for breakfast. If you have food for the maintainers try |
| .BI <bug-zebra@gnu.org> |
| |
| |
| .SH AUTHOR[S] |
| See <\fBwww.zebra.org\fR>, or the Info file for an accurate list of authors. |
| |