| 2007-03-14 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * ospf_snmp.c: (ospf_snmp_neighbor_state) New function to |
| map internal quagga neighbor states to SNMP standard values. |
| (ospfNbrEntry) Call new ospf_snmp_neighbor_state function. |
| |
| 2007-03-14 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * ospf_zebra.c: (ospf_zebra_add, ospf_zebra_delete) Fix bug |
| where inet_ntoa was used twice in the same debug message, |
| which doesn't work because there's a single shared buffer |
| for the returned string. The fix is to use inet_ntop. |
| |
| 2007-02-27 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * ospfd.c: (ospf_terminate) Exit immediately if ospf is not |
| actually running (e.g. the config file was empty). Fixes |
| bug where SIGTERM would not kill ospfd. |
| |
| 2007-02-26 Paul Jakma <paul.jakma@sun.com> |
| |
| * ospf_spf.c: Fix regression introduced with bug #330 fix: The |
| cost update added to ospf_spf_add_parent only handled PtP |
| case, differing from same functionality in higher-level |
| ospf_spf_next. Regression diagnosed by Anders Pedersen, |
| mailnews+router-quagga-dev@news.cohaesio.com. |
| (ospf_vertex_new) Initialise vertices to max-cost. |
| (ospf_spf_init) Root vertex always creates with 0 cost. |
| (ospf_spf_add_parent) Remove the buggy V->W cost calculating |
| code, instead take the new distance as a parameter. |
| (ospf_nexthop_calculation) Take distance as parameter, so it |
| can be passed down to add_parent. |
| (ospf_spf_next) Dont initialise candiate vertex distance, |
| vertex_new does so already. Pass distance down to |
| nexthop_calculation (see above). |
| |
| 2007-01-24 Paul Jakma <paul.jakma@sun.com> |
| |
| * ospf_spf.c: Bug #330: Nexthop calculation sometimes may fail, |
| and it needs to indicate this result to SPF. |
| (ospf_spf_add_parent) Flush of parent list needs to be done here, |
| for simplicity. |
| (ospf_nexthop_calculation) Caller needs to know whether |
| nexthop calculation succeeded. Every return statement must |
| correctly indicate such. |
| (ospf_spf_next) Queueing/prioritisation of vertices in SPF |
| must take into account whether nexthop_calculation succeeded, |
| or SPF may fail to find best paths. |
| |
| 2006-12-12 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * ospf_interface.c: (ospf_if_is_configured, ospf_if_lookup_by_prefix, |
| ospf_if_lookup_recv_if) Simplify logic using new CONNECTED_PREFIX |
| macro. |
| * ospf_lsa.c: (lsa_link_ptop_set) Using the new CONNECTED_PREFIX |
| macro, both options collapse into the same code. |
| * ospf_snmp.c: (ospf_snmp_if_update) Simplify logic using new |
| CONNECTED_ID macro. |
| (ospf_snmp_is_if_have_addr) Simplify logic using new CONNECTED_PREFIX |
| macro. |
| * ospf_vty.c: (show_ip_ospf_interface_sub) Use new CONNECTED_PEER macro |
| instead of testing the IFF_POINTOPOINT flag. |
| * ospfd.c: (ospf_network_match_iface) Use new CONNECTED_PEER macro |
| instead of testing with if_is_pointopoint. And add commented-out |
| code to implement alternative (in my opinion) more elegant behavior |
| that has no special-case treatment for PtP addresses. |
| (ospf_network_run) Use new CONNECTED_ID macro to simplify logic. |
| |
| 2006-12-04 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * ospfd.c: (ospf_network_run) Remove an offending 'break' statement. |
| Previously, after creating a single ospf_interface on a given |
| network interface, the code would skip to the next interface |
| without considering other connected addresses on the interface. |
| After removing the 'break', we now consider all connected addresses. |
| |
| 2006-11-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * ospf_zebra.c: (ospf_router_id_update_zebra, |
| ospf_interface_address_add, ospf_interface_address_delete) |
| If (IS_DEBUG_OSPF (zebra, ZEBRA_INTERFACE)) is enabled, then |
| add a debug message about what Zebra is telling us. |
| (ospf_zebra_add_discard) Add a debug message matching the one |
| already in ospf_zebra_delete_discard. |
| |
| 2006-11-28 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * ospf_vty.c: (ospf_passive_interface_default) Take additional |
| 'newval' arg so we can update ospf->passive_interface_default inside |
| this function. More importantly, we now call ospf_if_set_multicast |
| on all ospf_interfaces. |
| (ospf_passive_interface, no_ospf_passive_interface) Fix bug: |
| for 'default' case, argv[0] is undefined, so we must test for |
| (argc == 0) before using argv[0]. And since |
| ospf_passive_interface_default now calls ospf_if_set_multicast as |
| needed, we can just return after calling |
| ospf_passive_interface_default. |
| |
| 2006-10-24 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * ospf_zebra.c: (ospf_redistribute_default_set) Fix bug where |
| a new value for ospf->default_originate was being ignored |
| if a previous 'default-information originate' command |
| had already been processed. |
| |
| 2006-10-22 Yar Tikhiy <yar@comp.chem.msu.su> |
| |
| * (general) Add support for passive-interface default (with |
| minor edits by Paul Jakma). |
| * ospf_interface.h: Add OSPF_IF_PASSIVE_STATUS macro, looking |
| at configured value, or the global 'default' value, as |
| required. |
| * ospf_interface.c: (ospf_if_new_hook) Leave passive |
| unconfigured per default, allowing global 'default' to |
| take effect for unconfigured interfaces. |
| * ospf_packet.c: (various) use OSPF_IF_PASSIVE_STATUS |
| * ospf_vty.c: (ospf_passive_interface_default) new function, |
| unset passive from all interfaces if default is enabled, as |
| the per-iface settings become redundant. |
| (ospf_passive_interface_update) new func, update passive |
| setting taking global default into account. |
| ({no,}ospf_passive_interface_addr_cmd) Add support for |
| 'default' variant of command. |
| (show_ip_ospf_interface_sub) Update to take global |
| default into account when printing passive status. |
| (ospf_config_write) ditto. |
| * ospfd.c: (ospf_new) set global passive-interface default. |
| * ospfd.h: (struct ospf) Add field for global |
| passive-interface. |
| |
| 2006-09-25 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * ospf_packet.c: (ospf_packet_dup, ospf_make_md5_digest) |
| Fix zlog_warn messages to eliminate compiler warnings. |
| (ospf_hello) Improve warning messages to show why we |
| are complaining. |
| |
| 2006-08-28 Andy Gay <andy@andynet.net> |
| |
| * ospf_packet.c: (ospf_make_db_desc) Assert added with More-bit |
| fixes does not hold up with addition of Ogier DB-Exchange |
| optimisation, which can empty the db-summary list in between |
| sent DD packets. Remove assert, update More-bit always when |
| in Exchange. |
| |
| 2006-08-27 J.J. Krabbendam <jkrabbendam@aimsys.nl> |
| |
| * ospfd.c: (ospf_finish_final) default redistribute should be |
| unset too, fixes bug where reconfiguring ospfd completely |
| can no longer enable default redistribution. |
| |
| 2006-08-25 Paul Jakma <paul.jakma@sun.com> |
| |
| * (general) Bug #134. Be more robust to backward time changes, |
| use the newly added libzebra time functions. |
| In most cases: recent_time -> recent_relative_time() |
| gettimeofday -> quagga_gettime (QUAGGA_CLK_MONOTONIC, ..) |
| time -> quagga_time. |
| (ospf_make_md5_digest) time() call deliberately not changed. |
| (ospf_external_lsa_refresh) remove useless gettimeofday, LSA |
| tv_orig time was already set in ospf_lsa_new, called via |
| ospf_external_lsa_new. |
| |
| 2006-08-04 Paul Jakma <paul.jakma@sun.com> |
| |
| * ospf_lsdb.c: (ospf_lsdb_delete_entry) new function, consolidate |
| exact same functionality replicated in other functions. |
| (ospf_lsdb_add) Strip out code by using ospf_lsdb_delete_entry. |
| (ospf_lsdb_delete) ditto. |
| (ospf_lsdb_delete_all) ditto. |
| |
| 2006-08-03 Paul Jakma <paul.jakma@sun.com> |
| |
| * ospf_packet.c: (ospf_make_db_desc) Unset the DD More bit |
| after constructing the packet, if appropriate. |
| (ospf_db_desc_proc) Speed up Exchange, slave should raise |
| ExchangeDone earlier, as RFC mandates, by forming its reply |
| before deciding whether both sides are done, avoids a |
| needless round of empty DD packet exchanges at the end of |
| Exchange, hence speeding up ExchangeDone. |
| Implement draft-ogier-ospf-dbex-opt DB-exchange optimisation. |
| (ospf_db_desc) use UNSET_FLAG macro. |
| |
| 2006-07-27 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * ospfd.c: (ospf_router_id_update) Fix and document the algorithm for |
| selecting the router ID: if there is not a statically configured ID, |
| then stick to the most recent value to avoid disruptive changes. |
| This should fix bug #288. |
| |
| 2006-07-26 Paul Jakma <paul.jakma@sun.com> |
| |
| * ospf_lsa.{c,h}: (ospf_lsa_unlock) Change to take a double pointer |
| to the LSA to be 'unlocked', so that, if the LSA is freed, the |
| callers pointer to the LSA can be NULLed out, allowing any further |
| use of that pointer to provoke a crash sooner rather than later. |
| * ospf_*.c: (general) Adjust callers of ospf_lsa_unlock to match |
| previous. Try annotate 'locking' somewhat to show which 'locks' |
| are protecting what LSA reference, if not obvious. |
| * ospf_opaque.c: (ospf_opaque_lsa_install) Trivial: remove useless |
| goto, replace with return. |
| * ospf_packet.c: (ospf_make_ls_ack) Trivial: merge two list loops, |
| the dual-loop predated the delete-safe list-loop macro. |
| |
| 2006-07-25 Paul Jakma <paul.jakma@sun.com> |
| |
| * ospf_neigbor.h: (struct ospf_neighbor) Add some additional |
| neighbour state statistics fields, timestamps for progressive |
| and regressive state changes, and pointer to event string |
| for the latter state change. |
| * ospf_nsm.c: (nsm_notice_state_change) Update new state changs |
| history as required. |
| * ospf_vty.c: (show_ip_ospf_neighbor_detail_sub) Print out above |
| new per-neighbour state change stats. |
| |
| 2006-07-10 Paul Jakma <paul.jakma@sun.com> |
| |
| * ospf_nsm.c: (nsm_change_state) call nsm_clear_adj for all |
| adjacency losses, hence removing need for nsm_reset_nbr. |
| (nsm_reset_nbr) kill it, clear_adj in previous does fine. |
| (nsm_kill_nbr,nsm_start) remove nsm_reset_nbr call. |
| (ospf_nsm_event) Allow NSM function to be NULL, this along with |
| removal of nsm_reset_nbr, allows a bunch of now useless functiosn |
| to be removed. |
| Remove some useless variables. |
| (nsm_ignore) now useless, remove. |
| (nsm_bad_ls_req) ditto |
| (nsm_seq_number_mismatch) " |
| (nsm_oneway_received) " |
| (nsm_inactivity_timer) " |
| (nsm_ll_down) " |
| (NSM) replace removed action functions with NULL. |
| (nsm_notice_state_changes) Move state change logging code to new |
| func to declutter nsm_change_state and ospf_nsm_event. |
| Log event with AdjChange, it's useful to know. |
| (nsm_change_state) move adjchange and snmp logging to previous. |
| (ospf_nsm_event) call nsm_notice_state_changes from here. |
| Move the debug message to entry of function, so it gets out |
| even if something goes wrong. |
| Record state change timestamp and event in nbr struct. |
| * ospf_neighbor.h: (struct ospf_neighbor) Add fields to record |
| timestamp of last NSM change and event. |
| * ospf_vty.c: (show_ip_ospf_neighbor_detail_sub) Print |
| last state change timestamp and event, if available. |
| |
| 2006-07-10 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * ospf_packet.c: (ospf_hello) Improve NetworkMask mismatch warning |
| message to include interface name and conflicting prefix lengths. |
| |
| 2006-07-07 Paul Jakma <paul.jakma@sun.com> |
| |
| * ospf_nsm.h: Add a NSM_Deleted neighbour state, to act as dummy |
| state indicating the neighbour is to be deleted. |
| * ospf_nsm.c: (general) Use the NSM_Deleted state to delete |
| neighbours, thus allowing code to be slightly more obvious |
| in its flow. |
| (nsm_timer_set) Add NSM_Deleted. Add another timer the code |
| missed. |
| (nsm_kill_nbr) No need for special case call to nsm_change_state |
| anymore. |
| Make the assert and error-handling for same case more readable |
| (Andrew Schorr) |
| Remove the call to ospf_nbr_delete, nsm_change_state can do |
| this generally now via NSM_Deleted. |
| (struct ... NSM) Add the dummy NSM_Deleted state, the 3 events |
| that can lead to nsm_kill_nbr all now transition the NBR to |
| NSM_Deleted and the general change_state function can be left |
| to do the work. |
| (ospf_nsm_event) Special casing of events and early-return can |
| be removed now. |
| On transition into Deleted, delete the nbr. |
| * ospf_dump.c: (ospf_nsm_state_msg) Add Deleted. |
| |
| 2006-07-06 Paul Jakma <paul.jakma@sun.com> |
| |
| * ospf_nsm.c: (ospf_nsm_event) LLDown event also results in nbr |
| being deleted, requires early-return too. Likely explains |
| some crash reports after interface events. |
| |
| 2006-07-04 Paul Jakma <paul.jakma@sun.com> |
| |
| * ospf_nsm.c: (general) Various small cleanups from Andrew's |
| review of last set of patches. |
| (nsm_timer_set) Loading, Full and default can share |
| same code too. |
| (nsm_should_adj) Can just be one big OR. |
| (nsm_twoway_received) Collapse into return statement. |
| |
| 2006-07-02 Paul Jakma <paul.jakma@sun.com> |
| |
| * ospf_nsm.c: (nsm_should_adj) New function, just consolidate the |
| 10.4 adjacency check from nsm_twoway_received/nsm_adj_ok. |
| (nsm_twoway_received/nsm_adj_ok) Use former. |
| (nsm_clear_adj) clear adjacency related state for a |
| neighbour, needed for some state changes from > ExStart down |
| to ExStart or less, which need not go through nsm_reset_nbr. |
| (nsm_reset_nbr) move code to former. Should be static. |
| (ospf_nsm_event) Don't allow action functions to change |
| next_state if the NSM tables do not indicate next_state is |
| conditional, log warning if one tries - existing code |
| appears fine though. |
| Remove long dead code. |
| Use nsm_clear_adj for state changes that take down |
| adjacencies to TwoWay/ExStart. |
| (nsm_timer_set) ls_req timer should be OFF in early states. |
| Compact several identical sections. |
| Set inactivity timer to OFF for Down, for documentary |
| purposes. |
| (nsm_kill_nbr) Oops, action function shouldn't try return |
| 1 for error. |
| * ospf_lsa.c: (ospf_translated_nssa_refresh) CID #13. |
| |
| 2006-06-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * ospf_vty.c: (show_ip_ospf_neighbor_id) Should show all instances |
| of that neighbor (since it may appear on multiple interfaces) |
| instead of bailing out after showing the first match. |
| |
| 2006-06-29 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * ospf_nsm.c: (nsm_twoway_received) When deciding whether to |
| change from state Init to ExStart, the test for whether the |
| neighboring router is DR or BDR should be against the |
| local router's notion of DR/BDR, not the neighbor's view. |
| |
| 2006-06-28 Erik Muller <erikm@internap.com> |
| |
| * ospfd.h: Define 2 new struct ospf config flags: |
| OSPF_LOG_ADJACENCY_CHANGES and OSPF_LOG_ADJACENCY_DETAIL |
| * ospf_nsm.c (nsm_change_state): Log adjacency changes if |
| requested. |
| * ospf_vty.c (ospf_log_adjacency_changes): New command function |
| to implement ospf subcommand "log-adjacency-changes [detail]". |
| (no_ospf_log_adjacency_changes) Turn off log-adjacency-changes. |
| (show_ip_ospf) Show whether adjacency changes are logged. |
| (ospf_config_write) Add "log-adjacency-changes [detail]" to config. |
| (ospf_vty_init) Add ospf_log_adjacency_changes and |
| no_ospf_log_adjacency_changes. |
| |
| 2006-06-26 Paul Jakma <paul.jakma@sun.com> |
| |
| * ospf_abr.c: (general) NSSA translate-candidate ABRs need to |
| be ASBRs, or other routers may rightfully refuse to install |
| translated type-5s LSAs. reported by dendroot@gmail.com. |
| (ospf_abr_nssa_check_status) Detect change in translator |
| state when ABR, and inc/dec redistribute count as when we |
| leave/enter the disabled state - so that translate-enabled |
| ABR properly sets ASBR bit on non-NSSA areas. |
| Run the resulting function through indent to clean it up. |
| * ospf_lsa.c: (router_lsa_flags) For purposes of ASBR bit, |
| NSSA area is same as stub area. |
| |
| 2006-06-24 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * ospf_snmp.c: (ospfTrapNbrStateChange, ospfTrapIfStateChange) Improve |
| info log message to indicate why the trap is being sent. |
| |
| 2006-06-24 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * ospf_dump.c: (config_write_debug) Fix typo to show debug ospf nsm |
| status properly (not ism status). |
| |
| 2006-06-17 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * ospf_vty.c: ({no_,}ospf_passive_interface) Replace if_lookup_by_name |
| with a call to if_get_by_name -- if the interface does not exist |
| already, it should be created. And remove the obsolete warning |
| message. |
| |
| 2006-06-15 Paul Jakma <paul.jakma@sun.com> |
| |
| * ospf_interface.h: (struct ospf_if_info) Add reference counts |
| for multicast group memberships. Add various macros to help |
| manipulate/check membership state. |
| * ospf_interface.c: (ospf_if_set_multicast) Maintain the |
| ospf_if_info reference counts, and only actually drop |
| memberships if it hits 0, to avoid losing membership when |
| OSPF is disabled on an interface with multiple active OSPF |
| interfaces. |
| * ospf_packet.c: (ospf_{hello,read}) Use the new macros to |
| check/set |
| multicast membership. |
| * ospf_vty.c: (show_ip_ospf_interface_sub) ditto. |
| |
| 2006-05-31 Paul Jakma <paul.jakma@sun.com> |
| |
| * ospf_lsdb.c: (ospf_lsdb_delete) robustify against NULL arguments, |
| print warning. |
| * ospf_lsa.c: (ospf_discard_from_db) ditto. |
| (ospf_maxage_lsa_remover) Check lsa->lsdb for validity, possible |
| mitigation (but not solution) for bug #269. |
| |
| 2006-05-30 Paul Jakma <paul.jakma@sun.com> |
| |
| * ospf_packet.c: (ospf_read) Debug message about packets |
| received on unenabled interfaces should be conditional on |
| debug being set. |
| |
| 2006-05-23 Paul Jakma <paul.jakma@sun.com> |
| |
| * ospf_vty.c: (general) Replace in-place route redistribution |
| command and help strings with the new auto-generated defines |
| from lib/route_types.h |
| |
| 2006-05-13 Paul Jakma <paul.jakma@sun.com> |
| |
| * ospf_lsa.c: (ospf_translated_nssa_refresh) fix the sanity |
| check to match the assert, small error in CID #13 fix. |
| |
| 2006-05-12 Paul Jakma <paul.jakma@sun.com> |
| |
| * ospf_lsa.c: (ospf_lsa_action) Get rid of the ospf_lookup |
| call, which is not checked for NULL return, by stripping out |
| functionality which is never used, hence fixing Coverity CID |
| #29. |
| (struct lsa_action) remove unused member. |
| (ospf_translated_nssa_refresh) Add non-assert sanity check, |
| in case DEBUG isn't defined. |
| Debug message when no type7 exists should print the ID from |
| the type5, not the type7, fixes CID #13. |
| * ospf_interface.c: (ospf_if_exists) Fix missing NULL return |
| check on ospf_lookup, CID #27. |
| * ospf_asbr.c: (ospf_redistribute_withdraw) remove ospf_lookup |
| call by taking the struct ospf * as argument, which the |
| caller has, fixing CID #28. |
| * ospf_asbr.h: (ospf_redistribute_withdraw) update declaration |
| * ospf_zebra.c: (ospf_redistribute_unset) update call to |
| ospf_redistribute_withdraw to match. |
| * ospf_ia.c: (ospf_update_router_route) ospf->backbone could be |
| NULL when passed to ospf_find_asbr_route_through_area, |
| check for NULL first, CID #14. |
| * ospf_ism.c: (ism_change_state) NULL check on oi->area is |
| useless, it's always valid. Only possibility where it |
| couldn't be is if there is a race between abr_task and |
| cleaning up oi's, in which case a NULL check here isn't going |
| to do anything. Fixes CID #15. |
| |
| 2006-05-11 Paul Jakma <paul.jakma@sun.com> |
| |
| * ospf_vty.c: (general) Audit ospf_lookup calls in commands, |
| ensure check for NULL result, make vty messages consistent. |
| (show_ip_ospf_interface) Missing NULL check on ospf_lookup |
| result, fixes Coverity CID #70. |
| (no_ospf_area_filter_list) Check NULL result from |
| ospf_area_lookup_by_area_id, fixes Coverity CID #69 |
| * ospf_route.c: (ospf_route_delete_same_ext) Fix deref before |
| NULL check by moving into check-protected block, fix CID #49. |
| * ospf_abr.c: (ospf_area_range_cost_set) Shouldn't create a new |
| range, should just lookup to see if one exists, the new range |
| is just leaked. Fixes CID #46. |
| * ospf_lsa.c: (ospf_default_originate_timer) Let the thread |
| take (struct ospf *) as thread argument, rather than (struct |
| ospf *)->default_originate, thus avoiding having to call |
| ospf_lookup. |
| * ospf_zebra.c: (ospf_redistribute_default_set) change setup |
| of ospf_default_originate_timer thread to match. |
| * ospfd.c: (ospf_router_id_update) ditto. |
| |
| 2006-04-24 Paul Jakma <paul.jakma@sun.com> |
| |
| * (general) More Virtual-link fixes, again with much help in |
| testing / debug from Juergen Kammer. Primarily in SPF. |
| * ospf_spf.h: Add guard. ospf_interface.h will include this |
| header. |
| * ospf_interface.h: Modify ospf_vl_lookup definition to take |
| struct ospf as argument, so as to allow for NULL area |
| argument. |
| (struct ospf_vl_data) Remove out_oi, instead add a struct |
| vertex_nexthop, to use as initial nexthop for backbone paths |
| through a vlink. |
| * ospf_interface.c: (ospf_vl_lookup) Modified to allow |
| NULL area to be passed to indicate "any" (first) area. |
| Add extra debug. |
| (ospf_vl_set_params) vl_oi -> nexthop. Add extra debug. |
| (ospf_vl_up_check) Fix debug, inet_ntoa returns a static |
| buffer.. |
| * ospf_route.c: (ospf_intra_add_router) Vlinks dont go through |
| backbone, don't bother checking. |
| * ospf_spf.c: (static struct list vertex_list) Record vertices |
| that will need to be freed. |
| (cmp) Order network before router vertices, as required, |
| wasn't implemented. |
| (vertex_nexthop_free) Mild additional robustness check. |
| (vertex_parent_free) Take void argument, as this function |
| is passed as list deconstructor for vertex parent list. |
| (ospf_vertex_new) More debug. Set deconstructor for parent |
| list. Track allocated vertices on the vertex_list. |
| (ospf_vertex_free) Get rid of the tricky recursive cleanup of |
| vertices. Now frees only the given vertex. |
| (ospf_vertex_add_parent) Fix assert. |
| (ospf_nexthop_calculation) Fix calculation of nexthop for |
| VLink vertices, lookup the vl_data and use its previously |
| recorded nexthop information. |
| (ospf_spf_calculate) Vertices are freed simply by deleting |
| vertex_list nodes and letting ospf_vertex_free as deconstructor |
| work per-node. |
| (ospf_spf_calculate_timer) Trivial optimisation, leave |
| backbone SPF calculation till last to reduce SPF churn on |
| VLink updates. |
| * ospf_vty.c: (ospf_find_vl_data) update call to ospf_vl_lookup |
| (no_ospf_area_vlink_cmd) ditto. |
| (show_ip_ospf_interface_sub) For Vlinks, the peer address is |
| more interesting than the output interface. |
| |
| 2006-04-03 Paul Jakma <paul.jakma@sun.com> |
| |
| * (general) Fix issues with handling of Vlinks and entries |
| in the nbrs route-table which were highlighted by the |
| nsm/nbr_self fixes from bug #234. Many thanks to Juergen |
| Kammer for his help and efforts in testing out debug patches to |
| pinpoint the issue. |
| * ospf_interface.c: (ospf_vl_new) Add nbr_self for Vlink. |
| * ospf_neighbor.c: (ospf_nbr_key) new static function, helper |
| to create key in nbrs table for a given nbr. |
| (ospf_nbr_delete) Use ospf_nbr_key. Add an assert() to |
| document an expected state. |
| (ospf_nbr_add_self) Ditto. |
| (ospf_nbr_lookup_by_addr) Add an assert. |
| * ospf_nsm.c: (nsm_kill_nbr) Can never kill the nbr_self |
| psuedo-neighbour. |
| |
| 2006-03-27 Paul Jakma <paul.jakma@sun.com> |
| |
| * ospf_lsa.c: (ospf_lsa_checksum) Add an explicit cast to avoid |
| the ambiguities of ANSI and C99 C with respect to type |
| conversion. Detailed problem report and test case with |
| example data supplied by Dmitry Ivanov <dimss@telecentrs.lv>. |
| |
| 2006-03-25 Paul Jakma <paul.jakma@sun.com> |
| |
| * ospf_interface.c: (ospf_if_lookup_recv_if) Ignore loopbacks, |
| we can never ever receive packets on those. Should fix |
| case where CARP is run with address in same subnet as real |
| interface. Problem report and diagnosis thanks to: |
| Landon Fuller <landonf@opendarwin.org>. |
| However, ospf_read() still can't deal deterministically with |
| multiple interfaces in same subnet. |
| |
| 2006-03-23 Steve Lawson <steve.lawson@aheadcomusa.com> |
| |
| * ospf_lsa.c: (ospf_lsa_install) Fix incorrect byte-order |
| conversion of OSPF_MAX_SEQUENCE_NUMBER |
| |
| 2006-01-19 Paul Jakma <paul.jakma@sun.com> |
| |
| * (general) various miscellaneous compiler warning fixes. |
| Remove redundant break statements from switch clauses |
| which return. |
| return from main, not exit, cause it annoys SOS. |
| Remove stray semi-colons which cause empty-statement |
| warnings. |
| |
| 2006-01-18 Juergen Kammer <j.kammer@eurodata.de> |
| |
| * ospf_lsa.c: (ospf_router_lsa_new) dont take reference to the |
| stream data until it is constructed, data reference is |
| volatile due to the potential resize in link_info_set |
| |
| 2006-01-18 Paul Jakma <paul.jakma@sun.com> |
| |
| * ospf_lsa.c: (link_info_set) Resize the stream if required and |
| possible. Return number of links added. |
| (lsa_link_*_set) use return value from previous. |
| * ospf_lsa.h: Add OSPF_ROUTER_LSA_LINK_SIZE define. |
| |
| 2006-01-17 Paul Jakma <paul.jakma@sun.com> |
| |
| * ospf_packet.c: (ospf_verify_header) print out the types |
| involved if there's a mismatch. |
| * ospf_zebra.c: (ospf_zebra_add) Adjust to new zserv format. |
| |
| 2006-01-10 Len Sorensen <lennartsorensen@ruggedcom.com> |
| |
| * (general) Bug #234, see also [quagga-dev 3902]. |
| Fix problem with nbr_self not being properly reinitialised |
| when an interface comes up, after having been down. |
| Some re-arrangement done by Paul Jakma, any bugs introduced |
| on top of Len's suggested changes are his. |
| * ospf_neighbor.c: (ospf_nbr_add_self) centralise |
| initialisation of nbr_self parameters here. |
| * ospf_interface.c: (ospf_if_new) deleting initialisation of |
| parameters of nbr_self, just rely on call to |
| ospf_nbr_add_self. |
| (ospf_if_cleanup) ditto. |
| * ospfd.c: (ospf_network_run) ditto. |
| |
| 2006-01-10 Juris Kalnins <juris@mt.lv> |
| |
| * ospf_zebra.c: (ospf_interface_address_delete) fix rare leak of |
| struct connected in an error case. |
| * ospf_packet.c: (ospf_make_md5_digest) fix odd, if not |
| undefined effect, assignment of an increment expression. |
| |
| 2006-01-10 Paul Jakma <paul.jakma@sun.com> |
| |
| * ospfd.c: (ospf_network_run) checking to see if router-id |
| is set should be on ospf->router_id, not router_id_static. |
| This was causing ospfd to not start if router-id had not |
| been configured statically. |
| (ospf_if_update) ditto. |
| * ospf_vty.c: (config_write_ospf_distribute) trim down |
| redundant strings. |
| |
| 2005-11-26 Paul Jakma <paul.jakma@sun.com> |
| |
| * ospf_api.c: (struct opaque_lsa) change from gcc zero-length |
| array to C99 incomplete type array. |
| * (general) s/graceful/deferred/ in all files, the former term |
| is confusing wrt OSPF Graceful-Restart. |
| * ospfd.c: (ospf_deferred_shutdown_check) dont return |
| a function which returns void. SOS complains about this. |
| (ospf_finish) |
| |
| 2005-11-20 Paul Jakma <paul.jakma@sun.com> |
| |
| * ospfd.h: remove the OSPF_ROUTER_ID_UPDATE_DELAY define |
| (struct ospf) remove the router_id timer thread. |
| remove export of ospf_router_id_update_timer. |
| * ospfd.c: (ospf_router_id_update) call ospf_if_update to |
| poke interfaces into action after ID has been configured. |
| (ospf_router_id_update_timer) removed. |
| (ospf_finish_final) t_router_id_update timer is gone. |
| (ospf_network_run) router-id update timer gone. |
| call ospf_router_id_update directly if ID not configured. |
| In the per-iface loop, don't ospf_if_up interfaces if |
| ID is still not configured. The update function will call |
| ospf_if_update anyway. |
| (ospf_if_update) ID update timer is gone. Just return if no |
| ID is set. |
| * ospf_vty.c: (ospf_router_id) call ospf_router_id_update, no |
| timer needed. |
| * ospf_zebra.c: (ospf_router_id_update_zebra) call |
| ospf_router_id_update directly, not via timer. |
| * ospf_abr.c: (ospf_abr_announce_network_to_area) check |
| returned LSA of ospf_summary_lsa_refresh and print warning if |
| it failed. |
| (ospf_abr_announce_network_to_area) similar |
| (ospf_abr_announce_rtr_to_area) similar |
| * ospf_lsa.c: (ospf_router_lsa_new) check LSA returned is valid. |
| (ospf_router_lsa_originate) similar |
| (ospf_router_lsa_refresh, ospf_network_lsa_new) similar |
| (ospf_summary_lsa_new) Check ID is valid. |
| (ospf_summary_lsa_originate) ditto, and check returned LSA from |
| previous function is !NULL. |
| (ospf_summary_lsa_refresh) check ospf_summary_lsa_new return |
| is !NULL. |
| (ospf_summary_asbr_lsa_new) ID valid check. |
| (ospf_summary_asbr_lsa_originate) similar. |
| |
| 2005-11-16 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * ospf_dump.h: Define OSPF_TIME_DUMP_SIZE as appropriate buffer size |
| for use with ospf_timer_dump and ospf_timeval_dump. |
| * ospf_vty.c: Change all buffer sizes used with ospf_timer_dump and |
| ospf_timeval_dump to have size OSPF_TIME_DUMP_SIZE. |
| (show_ip_ospf_interface_sub) Fix possible buffer overflow in |
| call to ospf_timer_dump. |
| |
| 2005-11-16 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * ospf_ism.h: (OSPF_ISM_TIMER_OFF) Improve macro syntax by enclosing |
| in 'do {...} while(0)'. |
| |
| 2005-11-14 Paul Jakma <paul.jakma@sun.com> |
| |
| * ospfd.c: (ospf_new) stub-shutdown should just default to |
| unconfigured, too strange otherwise. |
| (ospf_finish_final) t_opaque_lsa_self TIMER_OFF should be |
| preprocessor conditional on HAVE_OPAQUE_LSA. |
| * ospfd.h: (struct ospf) remove the SHUTDOWN_DEFAULT define. |
| no longer used, plus it wasn't in range that the command |
| accepted. |
| * ospf_zebra.h: Depends on vty.h, include it. |
| |
| 2005-11-11 Paul Jakma <paul.jakma@sun.com> |
| |
| * ospf_spf.c: (ospf_canonical_nexthops_free) Free only |
| the nexthops pointing to the root vertex. We may visit a |
| vertex twice or the vertex may have some inherited nexthops, |
| if we free other nexthops we could crash. |
| |
| 2005-11-04 Paul Jakma <paul.jakma@sun.com> |
| |
| * ospf_{dump,spf,vty}.c: Oops, use the internal tv_sub |
| function rather than unportable timersub. |
| |
| 2005-11-03 Paul Jakma <paul.jakma@sun.com> |
| |
| * ospf_apiserver.c: (apiserver_sync_callback) stray semi-colon |
| * ospf_packet.c: include checksum.h, remove the in_cksum extern |
| * prototypes. |
| * ospf_te.h: Add braces, quell warning. |
| * ospf_packet.c: Change level of some warnings to |
| informational. |
| |
| 2005-10-29 Paul Jakma <paul.jakma@sun.com> |
| |
| * (general) RFC3137 stub-router support |
| * ospfd.h: Add OSPF_OUTPUT_COST_INFINITE define. |
| (struct ospf_master) Add a OSPF_MASTER_SHUTDOWN flag for |
| options, to allow shutdown to distinguish between complete |
| shutdown and shutdown of a subset of ospf instances. |
| (struct ospf) |
| Add stub_router_{startup,shutdown_}time, configuration of startup |
| and shutdown time for stub-router. |
| Add t_graceful_shutdown struct thread, timer for graceful |
| shutdown, if needed. |
| (struct ospf_area) Add stub_router_state - run time state of |
| stub-router for an area. Add flags for ADMIN, IS and WAS |
| states. |
| Add t_stub_router, timer thread to resend router-lsa for an |
| area. |
| * ospf_lsa.c: (ospf_link_cost) new simple function to spit out |
| either the given lnks cost or infinite cost if stub-router is |
| in effect. |
| (lsa_link_{ptop,broadcast,virtuallink,ptomp}_set) use |
| previous function for transit-links. |
| (ospf_stub_router_timer) timer thread for end of startup stub |
| router. Change state as required for the area and setup |
| re-origination of router-lsa. |
| (ospf_stub_router_check) Check/do whether stub-router should be |
| enabled, and whether it requires timer to be setup. |
| (ospf_router_lsa_new) call previous function at top. |
| (ospf_router_lsa_originate) no external callers, made static. |
| * ospf_lsa.h: (ospf_router_lsa_originate) removed. |
| * ospf_main.c: (sigint) make static. |
| remove call to exit, as ospf_terminate now deals with |
| exiting. |
| * ospf_route.c: (ospf_terminate) removed, now in ospfd.c. |
| * ospf_vty.c: (show_ip_ospf_area) print out state of |
| stub-router, if active. |
| (show_ip_ospf) print out configuration of stub-router |
| support, and details of graceful-shutdown if the timer is |
| active. |
| ((no)?ospf_max_metric_router_lsa_{admin,startup,shutdown}) new |
| commands to (de-)?configure stub-router support. |
| (config_write_stub_router) write out config of stub-router. |
| (ospf_config_write) call previous. |
| (ospf_vty_init) install the new stub-router commands. |
| * ospfd.c: various functions made static. |
| (ospf_new) Set defaults for stub-router. Graceful shutdown |
| is made to default on, just to be adventerous. |
| (ospf_graceful_shutdown_finish) new function, final part of |
| shutdown. |
| (ospf_graceful_shutdown_timer) timer thread wrapper for |
| graceful-shutdown. |
| (ospf_graceful_shutdown_check) check whether to setup timer |
| for shutdown or proceed directly to final shutdown. |
| (ospf_terminate) moved here from ospf_route.c, call |
| ospf_finish for each instance. |
| (ospf_finish) renamed to ospf_finish_final and made static. |
| (ospf_finish) new function, exported wrapper around |
| ospf_graceful_shutdown_check. |
| (ospf_finish_final) complete shutdown of an instance. |
| Add missing TIMER_OFF's of two timer threads. |
| (ospf_area_free) opaque self lsa timer should be turned off. |
| |
| 2005-10-23 Paul Jakma <paul.jakma@sun.com> |
| |
| * ospf_apiserver.c: (ospf_apiserver_term) This function should |
| not have side-effects (eg segv) if no apiserver instances are |
| active, ie be robust. |
| * ospf_vty.c: (show_ip_ospf) fix display of SPF timer if it |
| has not yet been run. |
| |
| 2005-10-21 Paul Jakma <paul.jakma@sun.com> |
| |
| * ospf_dump.c: (ospf_timeval_dump) fix ms adjustment, thanks to |
| Andrew Schorr. |
| * ospf_vty.c: (ospf_config_write) fix write out of spf timers |
| configuration. |
| |
| 2005-10-21 Paul Jakma <paul.jakma@sun.com> |
| |
| * (general) SPF millisecond resolution timer with adaptive, |
| linear back-off holdtime. Prettification of ospf_timer_dump. |
| * ospf_dump.c: (ospf_timeval_dump) new function. The guts of |
| ospf_timer_dump, but made to be more dynamic in printing out |
| the relative timeval, sliding the precision printed out |
| according to the value. |
| (ospf_timer_dump) guts moved to ospf_timeval_dump. |
| * ospf_dump.h: export ospf_timeval_dump. |
| * ospf_flood.c: (ospf_flood) remove gettimeofday, use |
| the libzebra exported recent_time instead, as it's not |
| terribly critical to have time exactly right - the dropped |
| LSA will be retransmited to us if we don't ACK it. |
| * ospf_packet.c: (ospf_ls_upd_timer) Ditto, but here we're |
| not transmitting, just putting LSA back on update transmit list. |
| * ospfd.h: delay and holdtimes should be unsigned. |
| Add spf_max_holdtime and spf_hold_multiplier. |
| Update default defines for delay and hold time to be in msec. |
| (struct ospf) change the SPF timestamp to a struct timeval. |
| Remove ospf_timers_spf_(un)?set. |
| * ospfd.c: (ospf_timers_spf_{set,unset}) removed. |
| (ospf_new) initialise spf_max_holdtime and spf_hold_multiplier |
| * ospf_spf.c: (ospf_spf_calculate) SPF timestamp is a timeval |
| now, update with gettimeofday. |
| (ospf_spf_calculate_schedule) Change SPF timers to millisecond |
| resolution. |
| Make the holdtime be adaptive, with a linear increase in |
| holdtime ever consecutive SPF run which occurs within holdtime |
| of previous SPF, bounded by spf_max_holdtime. |
| * ospf_vty.c: Update spf timers commands. |
| (ospf_timers_spf_set) trivial helper. |
| (ospf_timers_throttle_spf_cmd) new command to set SPF delay, |
| initial hold and max hold times with millisecond resolution. |
| (ospf_timers_spf_cmd) Deprecated. Accept the old values, |
| convert to msec, truncate to new limits. |
| (no_ospf_timers_throttle_spf_cmd) set timers to defaults. |
| (no_ospf_timers_spf_cmd) deprecated form, same as previous. |
| (show_ip_ospf_cmd) Display SPF parameters and times. |
| (show_ip_ospf_neighbour_header) Centralise the 'sh ip os ne' |
| header. |
| (show_ip_ospf_neighbor_sub) Fix the field widths. Get rid of |
| the multiple spaces which were making the lines even longer. |
| (show_ip_ospf_neighbor_cmd) Use show_ip_ospf_neighbour_header |
| (show_ip_ospf_neighbor_all_cmd) ditto and fix the field |
| widths for NBMA neighbours. |
| (show_ip_ospf_neighbor_int) Use header function. |
| (show_ip_ospf_nbr_nbma_detail_sub) use sizeof for timebuf, |
| local array - safer. |
| (show_ip_ospf_neighbor_detail_sub) ditto |
| (ospf_vty_init) install the new SPF throttle timer commands. |
| |
| 2005-10-21 Paul Jakma <paul.jakma@sun.com> |
| |
| * (general) OSPF fast, sub-second hello and 1s dead-interval |
| support. |
| * ospf_dump.c: (ospf_timer_dump) Print out milliseconds too. |
| Callers typically specify a length of 9, so most see |
| millisecs unless they specify the additional length. |
| * ospf_interface.h: (struct ospf_interface) new interface param, |
| fast_hello. |
| * ospf_interface.c: (ospf_if_table_lookup) add brackets, |
| gcc warning fix. |
| (ospf_new_if_params) Initialise fast_hello param. |
| (ospf_free_if_params) Check whether fast_hello is configured. |
| (ospf_if_new_hook) set fast_hello to default. |
| * ospf_ism.h: Wrap OSPF_ISM_TIMER_ON inside do {} while (0) to |
| prevent funny side-effects from its if statement when this |
| macro is used conditionally by other macros. |
| (OSPF_ISM_TIMER_MSEC_ON) new macro, set in milliseconds. |
| (OSPF_HELLO_TIMER_ON) new macro to set hello timer according |
| to whether fast_hello is set. |
| * ospf_ism.c: Update all setting of the hello timer to use |
| either OSPF_ISM_TIMER_MSEC_ON or OSPF_HELLO_TIMER_ON. The |
| former is used when hello is to be sent immediately. |
| * ospf_nsm.c: ditto |
| * ospf_packet.c: (ospf_hello) hello-interval is not checked |
| for mismatch if fast_hello is set. |
| (ospf_read) Annoying nit, fix "no ospf_interface" to be debug |
| rather than a warning, as it can be perfectly normal to |
| receive packets when logical subnets are used. |
| (ospf_make_hello) Set hello-interval to 0 if fast-hellos are |
| configured. |
| * ospf_vty.c: (ospf_auto_cost_reference_bandwidth) annoying |
| nit, don't vty_out if this command is given, it gets tired |
| quick. |
| (show_ip_ospf_interface_sub) Print the hello-interval |
| according to whether fast-hello is set or not. |
| Print the extra 5 millisec characters from (ospf_timer_dump) |
| if fast-hello is configured. |
| (ospf_vty_dead_interval_set) new function, common to all |
| forms of dead-interval command, to set dead-interval and |
| fast-hello correctly. If a dead-interval is given, unset |
| fast-hello, else if a hello-multiplier is set, set |
| dead-interval to 1 and fast-hello to given multiplier. |
| (ip_ospf_dead_interval_addr_cmd) use |
| ospf_vty_dead_interval_set(). |
| (ip_ospf_dead_interval_minimal_addr_cmd) ditto. |
| (no_ip_ospf_dead_interval) Unset fast-hello. |
| (no_ip_ospf_hello_interval) Bug-fix, unset of hello-interval |
| should set it to OSPF_HELLO_INTERVAL_DEFAULT, not |
| OSPF_ROUTER_DEAD_INTERVAL_DEFAULT. |
| (config_write_interface) Write out fast-hello. |
| (ospf_config_write) Write a comment about |
| "auto-cost reference-bandwidth" having to be equal on all |
| routers. Hopefully just as noticeable as old practice of |
| writing to vty, but less annoying. |
| (ospf_vty_if_init) install the two new dead-interval |
| commands. |
| * ospfd.h: Add defines for OSPF_ROUTER_DEAD_INTERVAL_MINIMAL |
| and OSPF_FAST_HELLO_DEFAULT. |
| |
| 2005-10-18 Paul Jakma <paul.jakma@sun.com> |
| |
| * (general) SPF memory management cleanup and fix for rare |
| double-free bug. |
| * ospf_spf.h: (struct vertex_parent) New struct to hold parent |
| specific data, eg the backlink and the parent vertex pointer, |
| and point to the appropriate general struct vertex_nexthop. |
| (struct vertex_nexthop) remove parent vertex pointer, so |
| this struct can be shared across vertices. |
| (struct vertex) rename list child to list children. Remove |
| list of nexthops, replace with list of vertex_parents. |
| * ospf_spf.c: (update_stat) trivial, remove cast from void *. |
| (vertex_nexthop_new) remove init of parent - field is gone |
| from struct vertex_nexthop. |
| (ospf_canonical_nexthops_free) Remove the canonical |
| vertex_nexthop memory objects. These are the vertex_nexthops |
| attached to the first level of router vertices from the root. |
| (vertex_parent_new) new function, create a vertex_parent. |
| (vertex_parent_free) ditto, but free it. |
| (ospf_vertex_new) Update to match changes to struct vertex. |
| (ospf_vertex_free) Recursively free a struct vertex and its |
| children. The parent list is used as a reference count. |
| vertex_nexthops must be free seperately, if required. |
| (ospf_vertex_dump) update to match struct vertex changes. |
| Print out backlink of parents too. |
| (ospf_vertex_add_parent) ditto. |
| (ospf_lsa_has_link) update comment. |
| (ospf_nexthop_add_unique) removed, not needed anymore. |
| (ospf_nexthop_merge) ditto. |
| (ospf_spf_consider_nexthop) renamed to ospf_spf_add_parent. |
| Simplified to just create vertex_parent and add it. |
| (ospf_spf_flush_parents) new function, flush out the parent |
| list. |
| (ospf_nexthop_calculation) Take the relevant route_lsa_link |
| as an argument, which simplifies things and removes the need |
| for the hack in ospf_nexthop_add_unique - ospf_spf_next |
| already knew exactly which link the cost calculated was for. |
| Update to match struct vertex changes too. |
| (ospf_spf_next) Don't create a vertex for W unnecessarily, if |
| it's there's a vertex already created for W, use it, and |
| hence there's no need to free it either. |
| Update some manipulation/comparisons of distance to match. |
| Flush the parent list if a lower cost path is found. |
| (ospf_spf_route_free) unused, removed. |
| (ospf_spf_dump) match the struct vertex changes, and dump the |
| ifname if possible. |
| (ospf_spf_calculate) At end of SPF, free the canonical nexthops |
| and call ospf_vertex_free on the root vertex to free the |
| entire tree. |
| * ospf_interface.c: (ospf_vl_set_params) match struct vertex |
| changes. |
| * ospf_route.c: (ospf_intra_route_add) ditto |
| (ospf_route_copy_nexthops_from_vertex) ditto |
| |
| 2005-10-11 Paul Jakma <paul.jakma@sun.com> |
| |
| * ospf_api.c: sign warnings. |
| * ospf_apiserver.c: sign warning and convert all the struct |
| in_addr initialisations so as not to make assumptions about |
| how this struct is organised, initialise the s_addr member |
| explicitely. |
| * ospf_packet.c: Add const qualifier to auth_key. |
| |
| 2005-10-06 Alain Ritoux <alain.ritoux@6wind.com> |
| |
| * ospf_snmp.c: Avoid mixing interface and ospf_interface objects |
| which now allows snmpwalk to work with ospfIfTable and |
| also with ospfIfMetricTable |
| |
| 2005-10-01 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * ospf_dump.c: Remove local hard-coded table ospf_redistributed_proto. |
| (ospf_redist_string) New function implemented using new library |
| function zebra_route_string(). Note that there are a few differences |
| in the output that will result: the new function returns strings |
| that are lower-case, whereas the old table was mixed case. Also, |
| the old table mapped ZEBRA_ROUTE_OSPF6 to "OSPFv3", whereas the |
| new function returns "ospf6". |
| * ospfd.h: Remove extern struct message ospf_redistributed_proto[], |
| and add extern const char *ospf_redist_string(u_int route_type) |
| instead. |
| * ospf_asbr.c: (ospf_external_info_add) In two messages, use |
| ospf_redist_string instead of LOOKUP(ospf_redistributed_proto). |
| * ospf_vty.c: Remove local hard-coded table distribute_str. |
| (config_write_ospf_redistribute,config_write_ospf_distribute): Use |
| new library function zebra_route_string() instead of distribute_str[]. |
| * ospf_zebra.c: (ospf_redistribute_set,ospf_redistribute_unset, |
| ospf_redistribute_default_set,ospf_redistribute_check) |
| In debug messages, use ospf_redist_string() instead of |
| LOOKUP(ospf_redistributed_proto). |
| |
| 2005-09-30 Vincent Jardin <vincent.jardin@6wind.com> |
| |
| * ospf_dump.c, ospf_ia.c, ospf_spf.c, ospf_ase.c: |
| remove unused DEBUG |
| |
| 2005-09-29 Alain Ritoux <alain.ritoux@6wind.com> |
| |
| * ospf_ism.c: generate SNMP traps on Interface state change |
| * ospf_nsm.c: generate SNMP traps on Neighbour state change |
| * ospf_snmp.[ch]: support for SNMP traps for interface and neighbours. |
| |
| 2005-09-29 Alain Ritoux <alain.ritoux@6wind.com> |
| |
| * ospf_vty.c: forece default route LSA to be re_issued whenever |
| cost is changed ( [no] ip ospf area XXX default-cost YYY) |
| Support ignore-mtu option |
| * ospfd.h: define OSPF_MTU_IGNORE_DEFAULT |
| * ospf_packet.c: support ignore-mtu option |
| * ospf_interface.h: field added for skipping MTU check |
| * ospf_interface.c: fix memory leak in ospf_crypt_key_delete() |
| Set mtu_ignore field to default value |
| * ospf_abr.[ch]: export ospf_abr_announce_network_to_area() |
| * ospf_ism.h: add MACRO to convert internal ISM status into SNMP |
| correct values |
| * ospf_snmp.c: add sanity check on LSA type in lsdb_lookup_next() |
| convert OSPFIFSTATE internal status into SNMP values |
| |
| 2005-09-28 Alain Ritoux <alain.ritoux@6wind.com> |
| |
| * ospf_packet.c: use new md5 API |
| |
| 2005-09-19 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * ospf_lsa.h: (ospf_external_lsa_flush) Comment out the 5th argument |
| (nexthop) since it is not used in the function (except inside |
| some commented-out code). |
| * ospf_lsa.c: (ospf_external_lsa_flush,ospf_external_lsa_refresh) |
| Comment out the 5th argument to ospf_external_lsa_flush. |
| * ospf_asbr.c: (ospf_redistribute_withdraw) Comment out 5th arg |
| to ospf_external_lsa_flush. |
| * ospf_vty.c: (no_ospf_default_information_originate) Eliminate 5th |
| uninitialized nexthop arg to ospf_external_lsa_flush. |
| * ospf_zebra.c: (ospf_zebra_read_ipv4) Comment out 5th arg |
| to ospf_external_lsa_flush. |
| * ospfd.c: (ospf_network_set) Comment out 5th arg |
| to ospf_external_lsa_flush. |
| |
| 2005-09-17 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * ospf_opaque.c: |
| (ospf_opaque_lsa_refresh_schedule,ospf_opaque_lsa_flush_schedule) |
| No need to call ospf_lookup(), just use lsa0->area->ospf instead. |
| |
| 2005-08-21 Hasso Tepper <hasso at quagga.net> |
| |
| * ospf_vty.c: Make "show ip ospf neighbor xxx" commands work. |
| Interface should be specified by name now. |
| |
| 2005-08-17 Hasso Tepper <hasso at quagga.net> |
| |
| * ospf_vty.c: Check carefully if interface exists before trying to |
| print info about it. |
| |
| 2005-08-05 Hasso Tepper <hasso at quagga.net> |
| |
| * ospf_zebra.c: Don't assert/stop before type == ZEBRA_ROUTE_MAX if |
| dealing with routemaps. There is ospf->route_map[ZEBRA_ROUTE_MAX] |
| for default-information. |
| |
| 2005-07-26 Paul Jakma <paul.jakma@sun.com> |
| |
| * ospf_abr.c: (ospf_abr_announce_network_to_area) SET_FLAG |
| should be on lsa not old, which may be freed for one thing, |
| obviously. |
| |
| 2005-07-12 Paul Jakma <paul.jakma@sun.com> |
| |
| * ospfd.h: add OSPF_ABR_DEFAULT for convenience, make |
| OSPF_ABR_CISCO be the default ABR type. |
| * ospfd.c: (ospf_new) initialise abr_type to OSPF_ABR_DEFAULT |
| * ospf_vty.c: (no_ospf_abr_type_cmd) add standard as a negatable |
| abr_type. default abr_type should be OSPF_ABR_DEFAULT. |
| (ospf_config_write) test whether default abr_type against |
| OSPF_ABR_DEFAULT, rather than any specific ABR_TYPE. |
| |
| 2005-06-20 Hasso Tepper <hasso at quagga.net> |
| |
| * ospf_nsm.c: Make database exchange for NSSA database work. |
| |
| 2005-06-13 Paul Jakma <paul.jakma@sun.com> |
| |
| * ospf_spf.c: Try get more information on a SEGV under |
| ospf_spf_vertex_add_parent. |
| (ospf_vertex_free) NULL out the child and nexthop lists |
| (ospf_vertex_add_parent) nexthop and child can not be NULL |
| vertex_nexthop's parent->child list can not be NULL |
| (ospf_spf_next) w and cw are per-loop iteration variables, move |
| declarations into loop body. |
| |
| 2005-06-07 Hasso Tepper <hasso at quagga.net> |
| |
| * ospf_apiserver.c: Fix obvious error in notifying clients about ISM |
| changes - oi->ifp->status doesn't give to us info about ISM, |
| oi->state does. |
| |
| 2005-06-01 Akihiro Mizutani <mizutani@net-chef.net> |
| |
| * ospf_ism.c (ospf_elect_bdr/ospf_elect_dr): Fix DR election bug. |
| |
| 2005-05-26 Paul Jakma <paul.jakma@sun.com> |
| |
| * ospf_abr.c: (ospf_abr_update_aggregate) Fix comment, cost bug itself |
| had been fixed long ago by Sowmini. |
| |
| 2005-05-19 Paul Jakma <paul.jakma@sun.com> |
| |
| * ospf_interface.c: (ospf_if_table_lookup) Fix a serious bug |
| a less serious one. |
| 1: this function is supposed to lookup |
| entries in the oifs ospf_interface route_table and return either |
| an existing oi or NULL to indicate not found, its caller depends |
| on this, yet this function uses route_node_get which /always/ |
| returns a route_node - one is created if none exists. Use |
| route_node_lookup instead. This should fix root cause of the |
| reports of the (ospf_add_to_if) assert being hit. |
| 2: oi's are inserted into this table with prefixlength set to |
| /32 (indeed, it should be a hash table, not a route_table), |
| however prefixlength to lookup was not changed, if no valid entry |
| can be inserted other than /32, then nothng but /32 should be |
| looked up. This possibly only worked by fluke.. |
| Fix confirmed by 2 reporters (one list, one IRC), definitely a |
| backport candidate once it has been incubated in HEAD for a while. |
| Thanks to Patrick Friedel and Ivan Warren for testing. |
| |
| 2005-05-11 Paul Jakma <paul.jakma@sun.com> |
| |
| * (general) Fix memory leaks in opaque AS-scope LSAs, reported and |
| with much debugging done by by scott collins <scollins@agile.tv>. |
| * ospf_lsa.c: (ospf_discard_from_db) dont call |
| ospf_ase_unregister_external_lsa for opaque-lsa's, opaques are |
| never registered with ase in the first place. |
| * ospf_packet.c: (general) Disabuse opaque related code of its |
| tendency to try gather up things into temporary lists. |
| (ospf_ls_upd) remove the temporary lists opaque uses, call |
| opaque functions inline, just like all other types. |
| (ospf_ls_ack) ditto. |
| (ospf_recv_packet) fixup sign warning. |
| * ospf_opaque.c: (general) fix the unneeded use of lists, and |
| untwist some of the logic. |
| (ospf_opaque_self_originated_lsa_received) take a single LSA |
| as argument, not a list of them. Remove the list loop. Logic |
| otherwise unchanged. |
| (ospf_opaque_ls_ack_received) Mostly ditto. But untwist the logic, |
| move the actions up into the switch block, remove the goto's and |
| sanitise the logic near the end a bit. |
| * ospf_opaque.h: Adjust definitions of aforementioned functions |
| in ospf_opaque.c to match. |
| |
| 2005-05-07 Yar Tikhiy <yar@comp.chem.msu.su> |
| |
| * ospf_network.c: Log ifindex on multicast membership leave/join |
| events. |
| |
| 2005-05-06 Paul Jakma <paul.jakma@sun.com> |
| |
| * (general) extern and static qualifiers added. |
| unspecified arguments in definitions fixed, typically they should |
| be 'void'. |
| function casts added for callbacks. |
| Guards added to headers which lacked them. |
| Proper headers included rather than relying on incomplete |
| definitions. |
| gcc noreturn function attribute where appropriate. |
| * ospf_opaque.c: remove the private definition of ospf_lsa's |
| ospf_lsa_refresh_delay. |
| * ospf_lsa.h: export ospf_lsa_refresh_delay |
| * ospf_packet.c: (ospf_make_md5_digest) make *auth_key const, |
| correct thing to do - removes need for the casts later. |
| * ospf_vty.c: Use vty.h's VTY_GET_INTEGER rather than ospf_vty's |
| home-brewed versions, shuts up several warnings. |
| * ospf_vty.h: remove VTY_GET_UINT32. VTY_GET_IPV4_ADDRESS and |
| VTY_GET_IPV4_PREFIX moved to lib/vty.h. |
| * ospf_zebra.c: (ospf_distribute_list_update_timer) hacky |
| overloading of the THREAD_ARG pointer should at least use |
| uintptr_t. |
| |
| 2005-04-15 Zhipeng Gong <zpgong@cdc.3upsystems.com> |
| |
| * ospf_abr.c: (ospf_abr_announce_network_to_area) dont forget |
| to approve LSAs for the case where metric has changed, lsa gets |
| flushed otherwise. (backport candidate). |
| |
| 2005-04-11 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * ospf_zebra.c (ospf_zebra_add): Call zclient_send_message instead |
| of writen. |
| |
| 2005-04-02 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * ospf_interface.h: (ospf_if_lookup_by_name) Remove declaration of a |
| function that does not exist. |
| |
| 2005-04-02 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * ospf_zebra.c: (zebra_interface_if_lookup) Must use |
| if_lookup_by_name_len. |
| |
| 2005-04-02 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * ospf_interface.c: (ospf_vl_new) Use strnlen to fix call to if_create. |
| |
| 2005-04-02 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * ospf_vty.c: (show_ip_ospf_interface_sub) Show ifindex and interface |
| flags to help with debugging. |
| * ospf_zebra.c: (ospf_interface_delete) After deleting, set ifp->ifindex |
| to IFINDEX_INTERNAL. |
| (zebra_interface_if_lookup) Make function static. Tighten up code. |
| |
| 2005-03-31 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * ospf_dump.c: (show_debugging_ospf) Show if ospf event debugging |
| is turned on. |
| |
| 2005-03-29 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * ospf_zebra.c: (ospf_interface_state_up) If the MTU of an operative |
| interface changes, print a debug message and call ospf_if_reset() |
| to simulate down/up on the interface. |
| * ospf_interface.h: Declare new function ospf_if_reset(). |
| * ospf_interface.c: (ospf_if_reset) New function to call ospf_if_down |
| and ospf_if_up for all ospf interfaces attached to an interface. |
| |
| 2005-03-29 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * ospf_packet.c: (ospf_write_frags) Enhance error message to |
| show MTU. Also make function static. |
| (ospf_write) Enhance error message to show interface name and MTU. |
| Also make function static. |
| |
| 2005-03-29 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * ospf_vty.c: (show_ip_ospf_interface_sub) Display interface MTU and |
| bandwidth; this is useful for debugging problems. Also, the function |
| should be static. |
| |
| 2005-03-27 Hasso Tepper <hasso at quagga.net> |
| |
| * ospf_snmp.c: Don't crash in snmp query if ospf instance doesn't |
| exist at all. |
| |
| 2005-03-25 Hasso Tepper <hasso at quagga.net> |
| |
| * ospfd.h: Include log.h, fixes compile with gcc-4.0. |
| |
| 2005-03-13 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * ospf_lsa.c: (ospf_lsa_refresh_walker) If the system clock jumps |
| backward, then current time may be less than |
| ospf->lsa_refresher_started. This was causing invalid values |
| for ospf->lsa_refresh_queue.index resulting in infinite loops. |
| Problem fixed by casting the expression to unsigned before taking |
| the modulus. |
| |
| 2005-02-23 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * ospfd.h: Add new field struct stream *ibuf to struct ospf. |
| * ospfd.c: (ospf_new) Check return code from ospf_sock_init. |
| Allocate ibuf using stream_new(OSPF_MAX_PACKET_SIZE+1). |
| (ospf_finish) Call stream_free(ospf->ibuf. |
| * ospf_packet.c: (ospf_read) Call stream_reset(ospf->ibuf) and then |
| pass it to ospf_recv_packet for use in receiving the packet |
| (instead of allocating a new stream for each packet received). |
| Eliminate all calls to stream_free(ibuf). |
| (ospf_recv_packet) The struct stream *ibuf is now passed in as |
| an argument. No need to use recvfrom to peek at the packet |
| header (to see how big it is), just use ospf->ibuf which is |
| always large enough (this eliminates a system call to recvfrom). |
| Therefore, no need to allocate a stream just for this packet, |
| and no need to free it when done. |
| |
| 2005-02-23 Vincenzo Eramo <eramo at infocom.ing.uniroma1.it> |
| |
| * ospf_lsa.h: New flag to the LSA structure for the SPF calculation. |
| * ospf_lsdb.h: Export ospf_lsdb_clean_stat() function. |
| * ospf_spf.h: Add link to the LSA stat structure into vertex. |
| * ospf_spf.c: New functions cmp() and update_stat() to manage |
| candidates. Remove ospf_spf_has_vertex(), ospf_vertex_lookup(), |
| ospf_install_candidate() and ospf_spf_register() functions not needed |
| any more. Update ospf_vertex_new(), ospf_spf_next() and |
| ospf_spf_calculate() functions to use pqueue instead of linked list. |
| |
| 2005-02-21 Hasso Tepper <hasso at quagga.net> |
| |
| * ospf_ase.c: Don't show messages related to the ase calculations if |
| we are not debugging. |
| |
| 2005-02-19 Hasso Tepper <hasso at quagga.net> |
| |
| * ospf_api.h: char isn't always signed, but it has to be it here. |
| |
| 2005-02-19 Paul Jakma <paul.jakma@sun.com> |
| |
| * ospf_packet.c: (ospf_stream_copy) remove |
| (ospf_packet_dup) use stream_copy instead of ospf_stream_copy |
| |
| 2005-02-17 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * ospf_packet.c: (ospf_recv_packet) If there is somehow a runt |
| packet in the queue, it must be discarded. Improve warning messages. |
| Fix scope to static. |
| (ospf_read) Fix bug: should reset the read thread in all cases |
| to make sure we continue to get incoming messages. |
| |
| 2005-02-15 Paul Jakma <paul.jakma@sun.com> |
| |
| * ospf_packet.c: (ospf_recv_packet) Fix silly error wrt allocating |
| ibuf. Thanks Andrew. |
| |
| 2005-02-14 Paul Jakma <paul.jakma@sun.com> |
| |
| * ospf_packet.c: (ospf_recv_packet) use stream_recvmsg. |
| |
| 2005-02-11 Hasso Tepper <hasso at quagga.net> |
| |
| * ospf_lsdb.c: Fix sum of checksums calculation. |
| |
| 2005-02-09 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * ospf_packet.c: (ospf_write) If sendmsg fails, give more info in the |
| error message. |
| |
| 2005-02-08 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * ospf_interface.h: Reduce structure padding by putting new u_char |
| field multicast_memberships in a better spot (grouped with |
| other u_char fields type and state). |
| |
| 2005-02-08 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * ospf_interface.h: Improve passive_interface comment. Add new |
| multicast_memberships bitmask to struct ospf_interface to track |
| active multicast subscriptions. Declare new function |
| ospf_if_set_multicast. |
| * ospf_interface.c: (ospf_if_set_multicast) New function to configure |
| multicast memberships properly based on the current |
| multicast_memberships status and the current values of the |
| ospf_interface state, type, and passive_interface status. |
| (ospf_if_up) Remove call to ospf_if_add_allspfrouters (this is |
| now handled by ism_change_state's call to ospf_if_set_multicast). |
| (ospf_if_down) Remove call to ospf_if_drop_allspfrouters (now |
| handled by ism_change_state). |
| * ospf_ism.c: (ospf_dr_election) Remove logic to join or leave |
| the DRouters multicast group (now handled by ism_change_state's call |
| to ospf_if_set_multicast). |
| (ism_change_state) Add call to ospf_if_set_multicast to change |
| multicast memberships as necessary to reflect the new interface state. |
| * ospf_packet.c: (ospf_hello) When a Hello packet is received on a |
| passive interface: 1. Increase the severity of the error message |
| from LOG_INFO to LOG_WARNING; 2. Add more information to the error |
| message (packet destination address and interface address); |
| and 3. If the packet was sent to ospf-all-routers, then try |
| to fix the multicast group memberships. |
| (ospf_read) When a packet is received on an interface whose state |
| is ISM_Down, enhance the warning message to show the packet |
| destination address, and try to update/fix the multicast group |
| memberships if the packet was sent to a multicast address. |
| When a packet is received for ospf-designated-routers, but the |
| current interface state is not DR or BDR, then increase the |
| severity level of the error message from LOG_INFO to LOG_WARNING, |
| and try to fix the multicast group memberships. |
| * ospf_vty.c: (ospf_passive_interface) Call ospf_if_set_multicast for |
| any ospf interface that may have changed from active to passive. |
| (no_ospf_passive_interface) Call ospf_if_set_multicast for |
| any ospf interface that may have changed from passive to active. |
| (show_ip_ospf_interface_sub) Show multicast group memberships. |
| |
| 2005-02-08 Paul Jakma <paul@dishone.st> |
| |
| * ospf_packet.c: (various) Remove unneeded stream_set_putp abuse. |
| |
| 2005-02-02 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * ospf_packet.c: (ospf_read) Fix bug: must check for state ISM_Down, |
| not for event ISM_InterfaceDown. And improve the message by |
| adding the interface flags. |
| |
| 2005-01-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * ospf_network.c: (ospf_sock_init) Save errno before calling |
| ospfd_privs.change. |
| |
| 2005-01-29 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * ospf_packet.c: (ospf_packet_add) If oi->obuf is NULL, print |
| an error message and return. |
| (ospf_read) If the interface state is ISM_InterfaceDown, issue |
| a warning message and ignore the packet. |
| |
| 2005-01-10 Greg Troxel <gdt@fnord.ir.bbn.com> |
| |
| * ospf_packet.h: Remove commented out definition of |
| OSPF_MAX_PACKET; neither it or the uncommented one are used any more. |
| |
| * ospf_packet.c (ospf_make_ls_upd): Leave room for authentication |
| when deciding if an update will fit. |
| (ospf_packet_authspace): Factor out calculation of size required |
| for authentication. |
| (ospf_make_db_desc): Use ospf_max_packet, not OSPF_MAX_PACKET. |
| Don't confuse readers that there is a macro. |
| |
| 2004-12-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * ospf_network.c: Improve all setsockopt error messages to give detailed |
| information on the arguments. |
| |
| 2004-12-29 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * ospf_packet.c: (ospf_db_desc) Reduce severity of "Negotiation done" |
| messages from LOG_WARNING to LOG_INFO, since this seems to be |
| normal. |
| |
| 2004-12-29 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * ospf_packet.c: (ospf_read) Always look up the interface if |
| ospf_recv_packet returns NULL ifp, since some platforms such |
| as Solaris 8 appear to support ifindex retrieval but don't. |
| |
| 2004-12-22 Hasso Tepper <hasso at quagga.net> |
| |
| * ospf_dump.c: Show debug configuration in vtysh. |
| * ospf_vty.c: Fix "show ip ospf" output. Router can't be elected in |
| any case if it's configured as "translate-never". |
| * ospf_lsdb.[ch]: New function to calculate sum of checksums. |
| * ospf_vty.c: Bugfix to show really number of AS external LSAs, not |
| number of all LSAs with AS scope, this includes opaque as LSAs as |
| well, show this number separately. Show numbers and sums of |
| checksums for each type of LSAs. |
| * ospf_lsa.c: Calculate checksum before putting LSA into database. |
| |
| 2004-12-15 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * ospf_interface.h: Declare new function ospf_default_iftype. |
| * ospf_interface.c: (ospf_default_iftype) New function to centralize |
| this logic in one place. |
| * ospf_zebra.c: (ospf_interface_add) Use new function |
| ospf_default_iftype. |
| * ospf_vty.c: (no_ip_ospf_network,config_write_interface) Fix logic |
| by using new function ospf_default_iftype. |
| |
| 2004-12-11 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * ospf_packet.c: (ospf_db_desc) Should be static, not global. |
| (ospf_hello,ospf_db_desc,ospf_ls_upd,ospf_ls_ack) Improve warning |
| messages to include identifying information (e.g. router id). |
| * ospf_nsm.c: (nsm_change_state) Improve info message to include |
| router id and state names. |
| |
| 2004-12-09 Greg Troxel <gdt@fnord.ir.bbn.com> |
| |
| * ospf_apiserver.c (ospf_apiserver_term): Obtain struct |
| ospf_apiserver * from listnode. Remove unused variables. Follows |
| suggestion from Jay Fenlason. |
| |
| 2004-12-08 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * *.c: Change level of debug messages to LOG_DEBUG. |
| |
| 2004-12-07 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * ospf_main.c: (main) The 2nd argument to openzlog has been removed. |
| |
| 2004-12-03 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * ospf_packet.c: (ospf_db_desc) Reduce priority on a debug message |
| from LOG_NOTICE to LOG_DEBUG. |
| |
| 2004-12-03 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * ospf_main.c: (sigint) Use zlog_notice for termination message. |
| (main) Issue a startup announcement using zlog_notice. |
| |
| 2004-11-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * ospf_packet.c: (ospf_db_desc_proc) Fix spelling of packet in warning |
| message and in comment. |
| (ospf_db_desc) Warning message that a packet is being discarded |
| should give the router id of the packet source. Fix spelling |
| of packet in two warning messages. |
| (ospf_ls_req) Warning message that a link state request is being |
| discarded should give the router id of the neighbor that sent it. |
| |
| 2004-11-26 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * ospf_main.c: Remove #include "debug.h" (was not being used, and |
| lib/debug.h has now been deleted). |
| |
| 2004-11-25 Hasso Tepper <hasso at quagga.net> |
| |
| * ospf_main.c: Make group to run as configurable. |
| |
| 2004-11-15 Greg Troxel <gdt@fnord.ir.bbn.com> |
| |
| * ospf_packet.c (ospf_recv_packet): Assume CMSG_SPACE is present |
| and works (lib/zebra.h provides if OS doesn't). |
| |
| 2004-11-15 Paul Jakma <paul@dishone.st> |
| |
| * ospf_{apiserver,te}.c: ospf_lsa_free's should be ospf_lsa_unlock. |
| |
| 2004-11-12 Paul Jakma <paul@dishone.st> |
| |
| * ospf_ia.c: (process_summary_lsa) Only an ABR has any reason to |
| ignore stub area summary default. Even so it seems a strange |
| check, add a comment to that effect. |
| |
| 2004-11-04 Paul Jakma <paul@dishone.st> |
| |
| * ospfd.c: (ospf_network_match_iface) revert to previous network |
| statement match behaviour. |
| |
| 2004-11-02 Paul Jakma <paul@dishone.st> |
| |
| * ospf_packet.c: (ospf_write_frags) remove iov arg, msg already points |
| to it. Add convenience pointer to msg->msg_iov[1], and use this, |
| fixing the unfortunate borkenness introduced in moving of this code |
| to a function. |
| (ospf_write) remove iovp and fix up call to previous. |
| (ospf_ls_upd_packet_new) cast size to long int - unfortunately |
| glibc's size_t format modifier is not portable. |
| |
| 2004-10-31 Paul Jakma <paul@dishone.st> |
| |
| * ospf_packet.c: (ospf_write_frags) Add debug output |
| (ospf_write) set type early, so we can pass it to |
| ospf_write_frags. |
| (ospf_ls_upd_packet_new) print size in debug output when too large |
| packet is encountered. |
| * ospf_zebra.c: (ospf_distribute_list_update_timer) Ugly misuse of |
| THREAD_ARG to store an integer, but it should at least use same |
| same type to retrieve the value. Assert value is sane. |
| |
| 2004-10-22 Paul Jakma <paul@dishone.st> |
| |
| * ospf_network.c: (ospf_sock_init) call neutral setsock_ifindex() |
| function. |
| * ospf_packet.c: (ospf_read) manually look up ifindex |
| if system could not have returned one, eg openbsd, thanks to Rivo |
| Nurges for highlighting problem and fix. |
| Change setsockopt_pktinfo to setsockopt_ifindex. |
| |
| 2004-10-19 Andrew J. Schorr <aschorr@telemetry-investments.com> |
| |
| * ospf_snmp.c: (ospf_snmp_if_update) Fix logic to handle PtP links |
| with dedicated subnets properly. |
| * ospf_lsa.c: (lsa_link_ptop_set) ditto. |
| * ospfd.c: (ospf_network_match_iface) ditto. |
| (ospf_network_run) ditto. |
| * ospf_interface.c: (ospf_if_is_configured) ditto. |
| (ospf_if_lookup_by_prefix) ditto. |
| (ospf_if_lookup_recv_if) ditto. |
| * ospf_vty.c: (show_ip_ospf_interface_sub) Display the peer or |
| broadcast address if present. |
| |
| 2004-10-13 Hasso Tepper <hasso at quagga.net> |
| |
| * ospf_main.c: Unbreak compilation with ospfapi disabled. |
| * ospf_snmp.c: Remove defaults used to initialize smux connection to |
| snmpd. Connection is initialized only if smux peer is configured. |
| |
| 2004-10-12 Hasso Tepper <hasso at quagga.net> |
| |
| * ospf_main.c, ospf_opaque.c: Unbreak ospfclient compilation - move |
| static variable from ospf_main.c into ospf_opaque.c. |
| |
| 2004-10-11 Hasso Tepper <hasso at quagga.net> |
| |
| * ospf_main.c, ospf_opaque.c: Disable ospfapi init by default. New |
| command line switch to enable it. |
| |
| 2004-10-11 Paul Jakma <paul@dishone.st> |
| |
| * ospf_dump.c: (ospf_ip_header_dump) Assume header is in host order |
| remove ntohs that should have dissappeared. Take struct ip |
| as argument, caller has to know there's an IP header at start of |
| stream anyway. |
| * ospf_dump.h: update declaration of ospf_ip_header_dump. |
| * ospf_packet.c: (ospf_write) correct call to |
| sockopt_iphdrincl_swab_htosys which was munging the header. |
| (ospf_recv_packet) ip_len is needed for old OpenBSD fixup. |
| (ospf_read) sockopt_iphdrincl_swab_systoh ip header as soon as |
| we have it. |
| * (global) Const char update and signed/unsigned fixes. |
| * (various headers) size defines should be unsigned. |
| * ospf_interface.h: remove duplicated defines, include the |
| authoritative header - though, these defines should probably |
| be moved to a dedicated header, or ospfd.h. |
| * ospf_lsa.h: (struct lsa) ls_seqnum should be unsigned. |
| * ospf_packet.c: (ospf_write) cast result of shift to unsigned. |
| |
| 2004-10-08 Hasso Tepper <hasso at quagga.net> |
| |
| * *.[c|h]: Fix compiler warnings: make some strings const, signed -> |
| unsigned, remove unused variables etc. |
| |
| 2004-10-07 Greg Troxel <gdt@claude.ir.bbn.com> |
| |
| * ospf_apiserver.c (ospf_apiserver_unregister_opaque_type): Don't |
| use of variable names 'node' and 'nextnode' to avoid possible |
| conflict with list macros. Move variable declaration inside for |
| loop after a statement to top of function. |
| |
| 2004-10-07 Paul Jakma <paul@dishone.st> |
| |
| * ospf_snmp.c: Missed list typedef update |
| * ospf_dump.c: Include sockopt.h for header swab functions. |
| |
| 2004-10-05 Paul Jakma <paul@dishone.st> |
| |
| * ospf_packet.c: replace ospf_swap_iph_to... with |
| sockopt_iphdrincl_swab_... |
| |
| 2004-10-03 James R. Leu <jleu at mindspring.com> |
| |
| * ospf_zebra.c: Read router id related messages from zebra daemon. |
| Schedule router-id update thread if it's changed. |
| * ospfd.c: Remove own router-id selection function. Use router id from |
| zebra daemon if it isn't manually overriden in configuration. |
| |
| 2004-09-27 Paul Jakma <paul@dishone.st> |
| |
| * ospf_dump.c: (ospf_ip_header_dump) Use HAVE_IP_HDRINCL_BSD_ORDER |
| Apply to offset too. Print ip_cksum, lets not worry about |
| possible 2.0.37 compile problems. |
| * ospf_packet.c: (ospf_swap_iph_to{n,h}) Use |
| HAVE_IP_HDRINCL_BSD_ORDER. |
| (ospf_recv_packet) ditto. |
| (ospf_write) Fixup iov argument to ospf_write_frags. |
| (struct msghdr).msg_name is caddr_t on most platforms. |
| (ospf_recv_packet) ditto. And msg_flags is not always there |
| memset struct then set fields we care about rather than |
| initialise all fields individually. |
| |
| 2004-09-26 Hasso Tepper <hasso at quagga.net> |
| |
| * ospf_abr.c, ospf_dump.c, ospf_lsa.c, ospf_packet.c, ospf_vty.c, |
| ospf_zebra.c: Fix compiler warnings. |
| |
| 2004-09-24 Paul Jakma <paul@dishone.st> |
| |
| * ospf_apiserver.{c,h}: lists typedef removal cleanup. |
| update some list loops to LIST_LOOP. some miscellaneous indent |
| fixups. |
| (ospf_apiserver_unregister_opaque_type) fix listnode_delete of |
| referenced node in loop. |
| (ospf_apiserver_term) loops calling ospf_apiserver_free, which |
| deletes referenced nodes from apiserver_list, fixed. |
| * ospf_interface.h: lists typedef removal cleanup. |
| * ospf_opaque.{c,h}: lists typedef removal cleanup. update some list |
| loops to LIST_LOOP. miscellaneous style and indent fixups. |
| * ospf_te.{c,h}: ditto |
| * ospf_packet.c: lists typedef removal cleanup. |
| (ospf_write) ifdef fragmentation support. move actual |
| fragmentation out to a new, similarly ifdefed, function. |
| (ospf_write_frags) fragmented write support, moved from previous. |
| |
| 2004-09-23 Hasso Tepper <hasso at quagga.net> |
| |
| * *.[c|h]: list -> struct list *, listnode -> struct listnode *. |
| |
| 2004-09-12 Paul Jakma <paul@dishone.st> |
| |
| * ospf_packet.c: Fix bugzilla #107 |
| (ospf_packet_max) get rid of the magic 88 constant |
| (ospf_swab_iph_ton) new function. set ip header to network order, |
| taking BSDisms into account. |
| (ospf_swab_iph_toh) the inverse. |
| (ospf_write) Add support for IP fragmentation, will only work on |
| linux though, other kernels make it impossible. get rid of the |
| magic 4 constant. |
| (ospf_make_ls_upd) Bound check to end of stream, not to |
| interface mtu. |
| (ospf_ls_upd_packet_new) New function, allocate upd packet |
| taking oversized LSAs into account. |
| (ospf_ls_upd_queue_send) use ospf_ls_upd_packet_new to allocate, |
| rather than statically allocating mtu sized packet buffer, which |
| actually was wrong - it didnt take ip header into account, which |
| should not be included in packet buffer. |
| (ospf_ls_upd_send_queue_event) minor tweaks and remove |
| TODO comment. |
| |
| 2004-08-31 David Wiggins <dwiggins@bbn.com> |
| |
| * ospf_spf.c (ospf_spf_calculate): Many more comments and debug |
| print statements. New function ospf_vertex_dump used in debugging. |
| |
| 2004-08-31 David Wiggins <dwiggins@bbn.com> |
| |
| * ospf_spf.h (struct vertex): Comments for flags and structure members. |
| |
| 2004-08-31 David Wiggins <dwiggins@bbn.com> |
| |
| * ospf_route.c: When finding an alternate route, log cost as well. |
| |
| 2004-08-31 David Wiggins <dwiggins@bbn.com> |
| |
| * ospf_interface.c (ospf_lookup_if_params): Initialize af in |
| struct prefix allocated on stack. |
| |
| 2004-08-31 David Wiggins <dwiggins@bbn.com> |
| |
| * ospf_packet.c (ospf_ls_ack_send_delayed): In p2mp mode, send |
| acks to AllSPFRouters, rather than All-DR. |
| |
| 2004-08-27 Hasso Tepper <hasso at quagga.net> |
| |
| * ospf_vty.c: Don't print ospf network type under interface only |
| if interface is in broadcast mode and interface type really is |
| broadcast. Fixes Bugzilla #108. |
| |
| 2004-08-27 David Wiggins <dwiggins@bbn.com> |
| |
| * ospf_spf.c (ospf_nexthop_calculation): Initialize address family |
| in on-stack struct prefix_ipv4. Fixes point-to-multipoint SPF |
| calculation. |
| |
| 2004-08-26 Greg Troxel <gdt@fnord.ir.bbn.com> |
| |
| * ospf_packet.c (ospf_recv_packet): adjust size declaration of |
| buffer used to get interface index so that it compiles on other |
| than Linux and includes the required alignment space. Probably |
| this was only working on sparc/sparc64 because most of |
| sockaddr_dl was not being written. |
| |
| 2004-08-19 Paul Jakma <paul@dishone.st> |
| |
| * ospf_packet.c: update to match sockopt renames. |
| |
| 2004-08-04 Paul Jakma <paul@dishone.st> |
| |
| * ospf_spf.c: (ospf_spf_consider_nexthop) Add comment about issue. |
| Compare only against list head - all nexthops must be same cost |
| anyway, fixes a reference-listnode-after-delete bug noted by |
| Kir Kostuchenko. |
| (ospf_nexthop_calculation) Use ospf_spf_consider_nexthop for all |
| candidates attached to root. |
| |
| 2004-07-27 Paul Jakma <paul@dishone.st> |
| |
| * ospf_packet.c: (ospf_ls_upd_send_queue_event) fix thinko from |
| last fix for ospfd wedging due to oversize LSAs: dont list loop on |
| ospf_ls_upd_queue_send() - guaranteed segfault. |
| |
| 2004-07-27 Paul Jakma <paul@dishone.st> |
| |
| * ospf_opaque.c: (ospf_opaque_lsa_flush_schedule) do not NULL out |
| the LSA as then free_opaque_info_per_id() can never unlock (and |
| free) the LSA. Reported by Gunnar Stigen. |
| |
| 2004-07-23 Paul Jakma <paul@dishone.st> |
| |
| * ospf_network.c: Replace PKTINFO/RECVIF with call to |
| setsockopt_pktinfo |
| * ospf_packet.c: Use getsockopt_pktinfo_ifindex and |
| SOPT_SIZE_CMSG_PKTINFO_IPV4. |
| |
| 2004-07-14 Paul Jakma <paul@dishone.st> |
| |
| * ospf_packet.c: (ospf_ls_upd_send_queue_event) Partial fix for |
| problem reported by Peter Frost amongst others, where function |
| will spin indefinitely if update list contains LSAs greater than |
| MTU-headers or other condition leading to update list never being |
| cleared. Problem of what to do with these LSAs remains. |
| (ospf_make_ls_upd) add comment about large LSA problem, |
| indentation cleanup. |
| |
| 2004-07-01 Greg Troxel <gdt@fnord.ir.bbn.com> |
| |
| * Makefile.am (lib_LTLIBRARIES): make libospf shared |
| |
| 2004-06-30 Greg Troxel <gdt@poblano.ir.bbn.com> |
| |
| * Makefile.am: Add shlib support. |
| |
| 2004-06-10 Hasso Tepper <hasso@estpak.ee> |
| |
| * *: Removed ifdefs HAVE_NSSA. |
| |
| 2004-06-06 Paul Jakma <paul@dishone.st> |
| |
| * ospf_dump.c,ospf_lsa.c: Fix typos of merge of previous. |
| ospf_flood.c: (ospf_process_self_originated_lsa) fix zlog format |
| |
| 2004-05-31 Sagun Shakya <sagun.shakya@sun.com> |
| |
| * ospf_dump.c: (ospf_lsa_header_dump) LOOKUP can return null if |
| index is out of range. |
| ospf_flood.c: endianness fix |
| ospf_lsa.c: Missing ntohl's on (struct lsa *)->data->ls_seqnum |
| in various places. |
| |
| 2004-05-10 Hasso Tepper <hasso@estpak.ee> |
| |
| * ospf_zebra.c, ospfd.c: Move ospf_prefix_list_update() function |
| to ospf_zebra.c from ospfd.c and add redistribution updates if |
| route-map is used in redistribution. |
| * ospf_main.c: Remove now useless call to ospf_init(). |
| |
| 2004-05-08 Paul Jakma <paul@dishone.st> |
| |
| * ospf_zebra.c: Sync with lib/zclient changes |
| |
| 2004-05-05 Paul Jakma <paul@dishone.st> |
| |
| * ospf_network.c: (ospf_sock_init) Check whether IP_HDRINCL is |
| defined. Warn at compile and runtime. Use |
| IPTOS_PREC_INTERNETCONTROL otherwise. |
| * ospf_packet.c: (ospf_associate_packet_vl) cleanup, move |
| some of the checks up to ospf_read, return either a |
| virtual link oi, or NULL. |
| (ospf_read) Cleanup, make it responsible for checks. Remove |
| the nbr lookup - moved to ospf_neighbor. Adjust all nbr |
| lookups to use new wrappers exported by ospf_neighbor. |
| * ospf_neighbor.h: Add ospf_neigbour_get and ospf_nbr_lookup. |
| * ospf_neighbor.c: (ospf_neigbour_get) Index ospf_interface |
| neighbour table by router-id for virtual-link ospf_interfaces, |
| not by peer_addr (which breaks for asymmetric vlinks) |
| (ospf_nbr_lookup) add a wrapper for nbr lookups to deal with |
| above. |
| * ospf_interface.c: (ospf_vl_set_params) Catch changes of interface |
| address for either end of a virtual-link, and hence potential cost |
| changes. |
| |
| 2004-04-22 Hasso Tepper <hasso@estpak.ee> |
| |
| * ospf_zebra.c: Don't ignore reject/bh routes, it's the only way |
| to "summarize" routes in ASBR at the moment. |
| |
| 2004-04-20 Hasso Tepper <hasso@estpak.ee> |
| |
| * ospfd.c: Unset NP flag if area is going to be normal or stub. |
| Fixes UNH OSPF_NSSA.1.2a comment. |
| * ospf_abr.c: Originate default into stub/nssa area even if |
| summaries are disabled. |
| * ospf_zebra.c: Don't attempt to redistribute 127.0.0.0/8. |
| |
| 2004-04-19 Hasso Tepper <hasso@estpak.ee> |
| |
| * ospf_vty.c: Don't warn that export- and import-list can't be |
| configured to backbone area if they are applied and are working |
| fine. |
| |
| 2004-02-19 Sowmini Varadhan <sowmini.varadhan@sun.com> |
| |
| * ospf_packet.c: Don't drop packets in Solaris x86. |
| [quagga-dev 1005]. |
| |
| 2004-03-18 Amir Guindehi <amir@datacore.ch> |
| |
| * ospf_opaque.c: Attempt to correct the incorrect behavior of |
| Quagga's ospfd in the special situation that a node's opaque |
| capability has changed as "ON -> OFF -> ON". [quagga-dev 843]. |
| |
| 2004-02-19 Sowmini Varadhan <sowmini.varadhan@sun.com> |
| |
| * ospf_abr.c: (ospf_abr_update_aggregate) UNH 3.12b,c, address range |
| should be configured with the highest cost path within the range, |
| not lowest. |
| |
| 2004-02-17 Paul Jakma <paul@dishone.st> |
| |
| * ospf_zebra.c: (ospf_interface_delete) Do not delete the interface |
| params, nor the interface structure, if an interface delete |
| message is received from zebra. |
| * ospf_interface.c: (ospf_if_delete_hook) Delete the interface |
| params and interface, ie that which was previously removed in |
| (ospf_interface_delete) above. |
| |
| 2004-02-11 Hasso Tepper <hasso@estpak.ee> |
| * ospf_interface.c, ospf_zebra.c: Don't attempt to read path->oi->ifp |
| if oi doesn't exist any more. |
| |
| 2004-02-11 Vadim Suraev <vadim.suraev@terayon.com> |
| * ospf_packet.c (ospf_ls_upd): Router should flush received network |
| LSA if it was originated with older router-id ([zebra 14710] #6). |
| |
| 2003-12-08 Mattias Amnefelt <mattiasa@kth.se> |
| |
| * ospf_packet.c: (ospf_recv_packet) OpenBSD now leaves iph.ip_len |
| network byte order. |
| |
| 2003-12-05 Greg Troxel <gdt@poblano.ir.bbn.com> |
| |
| * ospfd.c (ospf_network_match_iface): Rewrite code for clarity |
| while trying not to change semantics. Add ifdefed-out code to |
| avoid matching ppp interfaces whose destination address does not |
| also match the prefix under consideration, to help out people with |
| problems due to as-yet-unfixed bugs with p2p interfaces coming and |
| going. |
| |
| 2003-07-25 kamatchi soundaram <kamatchi@tdd.sj.nec.com> |
| |
| * ospf_packet.c (ospf_ls_upd_send_queue_event): get next route |
| node in body of the loop to avoid chance that route node |
| is unlocked and deleted before the next iteration tries to |
| get next route node. |
| |
| 2003-05-24 Kenji Yabuuchi |
| |
| * ospf_interface.c(ospf_if_lookup_recv_if): Use the most specific |
| match for interface lookup. |
| |
| 2003-05-18 Hasso Tepper <hasso@estpak.ee> |
| |
| * ospf_vty.c: Show NSSA LSA route info in "show ip ospf database" |
| output |
| |
| 2003-05-16 Hasso Tepper <hasso@estpak.ee> |
| |
| * ospf_lsa.c: Fix handling of NSSA |
| |
| 2003-04-23 Hasso Tepper <hasso@estpak.ee> |
| |
| * ospf_vty.c: fix "router xxx" node commands in vtysh |
| |
| 2003-04-19 Hasso Tepper <hasso@estpak.ee> |
| |
| * {ospf_abr,ospfd}.c: area id's DECIMAL -> ADDRESS |
| * ospf_routemap.c: sync daemon's route-map commands to have same |
| syntax. |
| |
| 2003-04-19 Sergey Vyshnevetskiy <serg@vostok.net> |
| |
| * ospf_packet.c: Add missing param to zlog |
| * ospf_flood.c: remove unused vars |
| |
| 2003-04-17 Denis Ovsienko <zebra@pilot.org.ua> |
| |
| * ospf_interface.c: fix incorrect memset |
| |
| 2003-04-10 Amir Guindehi <amir@datacore.ch> |
| |
| * ospf_lsa.[ch]: opaque LSA fix, use ospf_lookup. |
| |
| 2003-04-03 David Watson <dwatson@eecs.umich.edu> |
| |
| * ospf_lsa.c: byte order fix |
| |
| 2002-03-17 Amir Guindehi <amir@datacore.ch> |
| |
| * ospf_apiserver.[ch]: Merge Ralph Keller's OSPFAPI support. |
| * ospf_api.[ch]: Merge Ralph Keller's OSPFAPI support. |
| * ospfclient: OSPFAPI demonstration client. |
| |
| 2003-01-23 Masahiko Endo <endo@suri.co.jp> |
| |
| * ospf_ism.c: NSM event schedule bug fix. |
| |
| 2002-10-30 Greg Troxel <gdt@ir.bbn.com> |
| |
| * ospf_packet.c (ospf_make_md5_digest): MD5 length fix. |
| |
| 2002-10-23 endo@suri.co.jp (Masahiko Endo) |
| |
| * ospf_opaque.c: Update Opaque LSA patch. |
| |
| 2002-10-23 Ralph Keller <keller@tik.ee.ethz.ch> |
| |
| * ospf_vty.c (show_ip_ospf_database): Fix CLI parse. |
| |
| 2002-10-23 Juris Kalnins <juris@mt.lv> |
| |
| * ospf_interface.c (ospf_if_stream_unset): When write queue |
| becomes empty stop write timer. |
| |
| 2002-10-10 Greg Troxel <gdt@ir.bbn.com> |
| |
| * ospf_packet.c (ospf_check_md5_digest): Change >= to > to make it |
| conform to RFC. |
| |
| 2002-07-07 Kunihiro Ishiguro <kunihiro@ipinfusion.com> |
| |
| * zebra-0.93 released. |
| |
| 2002-06-19 Kunihiro Ishiguro <kunihiro@ipinfusion.com> |
| |
| * ospf_spf.c (ospf_nexthop_calculation): Add NULL set to oi and |
| check of l2. Reported by: Daniel Drown <dan-zebra@drown.org> |
| (ospf_lsa_has_link): LSA Length calculation fix. Reported by: |
| Paul Jakma <paulj@alphyra.ie>. |
| |
| * ospfd.c (ospf_if_update): Fix nextnode reference bug. Reported |
| by: juris@mt.lv. |
| |
| 2002-01-21 Kunihiro Ishiguro <kunihiro@ipinfusion.com> |
| |
| * ospfd.c: Merge [zebra 11445] Masahiko ENDO's Opaque-LSA support. |
| |
| 2001-08-27 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_interface.c (ospf_add_to_if): Use /32 address to register |
| OSPF interface information. |
| (ospf_delete_from_if): Likewise. |
| |
| * ospf_zebra.c (ospf_interface_address_delete): Likewise. |
| |
| 2001-08-23 Kunihiro Ishiguro <kunihiro@ipinfusion.com> |
| |
| * ospf_zebra.c (ospf_redistribute_unset): When redistribute type |
| is OSPF, do not unset redistribute flag. |
| |
| 2001-08-19 Kunihiro Ishiguro <kunihiro@ipinfusion.com> |
| |
| * zebra-0.92a released. |
| |
| 2001-08-15 Kunihiro Ishiguro <kunihiro@ipinfusion.com> |
| |
| * zebra-0.92 released. |
| |
| 2001-08-12 Kunihiro Ishiguro <kunihiro@ipinfusion.com> |
| |
| * ospfd.c (ospf_config_write): auto-cost reference-bandwidth |
| configuration display. |
| |
| 2001-07-24 David Watson <dwatson@eecs.umich.edu> |
| |
| * ospf_spf.c (ospf_spf_next): Modify ospf_vertex_add_parent to |
| check for an existing link before connecting the parent and child. |
| ospf_nexthop_calculation is also modified to check for duplicate |
| entries when copying from the parent. Finally, ospf_spf_next |
| removes duplicates when it merges two equal cost candidates. |
| |
| 2001-07-23 itojun@iijlab.net |
| |
| * ospfd.c (show_ip_ospf_neighbor): Check ospf_top before use it |
| [zebra 8549]. |
| |
| 2001-07-23 Kunihiro Ishiguro <kunihiro@ipinfusion.com> |
| |
| * ospf_packet.c (ospf_write): Remove defined(__OpenBSD__) to make |
| it work on OpenBSD. |
| |
| 2001-06-26 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_zebra.c (config_write_ospf_default_metric): Display |
| default-metric configuration. |
| |
| 2001-06-18 Kunihiro Ishiguro <kunihiro@ipinfusion.com> |
| |
| * ospf_ia.h (OSPF_EXAMINE_SUMMARIES_ALL): Remove old macros. |
| |
| 2001-05-28 Kunihiro Ishiguro <kunihiro@ipinfusion.com> |
| |
| * ospf_snmp.c (ospfIfEntry): Fix interface lookup bug to avoid |
| crush. |
| (ospfIfMetricEntry): Likewise. |
| |
| 2001-03-18 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_packet.c (ospf_read): Fix typo. Reported by: "Jen B |
| Lin'Kova" <jen@stack.net>. |
| |
| 2001-03-15 Gleb Natapov <gleb@nbase.co.il> |
| |
| * ospf_interface.c (ip_ospf_network): Set interface parameter. |
| (interface_config_write): Add check for OSPF_IFTYPE_LOOPBACK. |
| |
| * ospf_zebra.c (ospf_interface_add): Set interface parameter. |
| |
| 2001-02-21 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_packet.c (ospf_recv_packet): Solaris also need to add |
| (iph.ip_hl << 2) to iph.ip_len. |
| |
| 2001-02-09 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospfd.h (OSPF_LS_REFRESH_TIME): Fix OSPF_LS_REFRESH_TIME value. |
| Suggested by: David Watson <dwatson@eecs.umich.edu>. |
| |
| * ospf_zebra.c (zebra_init): Remove zebra node. |
| |
| * ospfd.c (ospf_area_range_set): Function name is changed from |
| ospf_ara_range_cmd. |
| (ospf_area_range_unset): New function which separated from DEFUN. |
| New commands are added: |
| "no area A.B.C.D range A.B.C.D/M advertise" |
| "no area <0-4294967295> range A.B.C.D/M advertise" |
| "no area A.B.C.D range A.B.C.D/M not-advertise" |
| "no area <0-4294967295> range A.B.C.D/M not-advertise" |
| |
| * ospf_lsa.c (ospf_lsa_more_recent): Fix previous change. |
| |
| 2001-02-08 Matthew Grant <grantma@anathoth.gen.nz> |
| |
| * ospf_network.c (ospf_if_add_allspfrouters): Use |
| setsockopt_multicast_ipv4. |
| (ospf_if_drop_allspfrouters): Likewise. |
| |
| * ospf_lsa.c (ospf_router_lsa_install): Add rt_recalc flag. |
| (ospf_network_lsa_install): Likewise. |
| (ospf_summary_lsa_install): Likewise. |
| (ospf_summary_asbr_lsa_install): Likewise. |
| (ospf_external_lsa_install): Likewise. |
| (ospf_lsa_install): Call ospf_lsa_different to check this LSA is |
| new one or not. |
| |
| 2001-02-08 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_zebra.c (ospf_interface_delete): Do not free interface |
| structure when ospfd receive interface delete message to support |
| pseudo interface. |
| |
| 2001-02-01 Dick Glasspool <dick@ipinfusion.com> |
| |
| * ospfd.c (area_range_notadvertise): Change area range "suppress" |
| command to "not-advertise". |
| |
| * ospfd.h (OSPF_LS_REFRESH_TIME): Change OSPF_LS_REFRESH_TIME from |
| 1800 to 60. |
| |
| * ospf_abr.c (ospf_abr_update_aggregate): When update_aggregate is |
| updating the area-range, the lowest cost is now saved. |
| |
| * ospf_lsa.c (ospf_lsa_more_recent): Routing to compare sequence |
| numbers rather than creating overflow during calculation. |
| |
| 2001-02-01 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * zebra-0.91 is released. |
| |
| 2001-01-31 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_packet.c (ospf_db_desc_proc): Do not continue process when |
| NSM_SeqNumberMismatch is scheduled. |
| (ospf_ls_req): Free ls_upd when return from this function. |
| (ospf_ls_upd_timer): When update list is empty do not call |
| ospf_ls_upd_send(). Suggested by: endo@suri.co.jp (Masahiko |
| Endo). |
| |
| 2001-01-26 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_lsa.c (ospf_maxage_flood): Flood LSA when it reaches |
| MaxAge. RFC2328 Section 14. |
| (ospf_maxage_lsa_remover): Call above function during removing |
| MaxAge LSA. |
| |
| 2001-01-26 Dick Glasspool <dick@ipinfusion.com> |
| |
| * ospf_flood.c (ospf_flood_through_as): Function is updated for |
| NSSA Translations now done at ospf_abr.c with no change in P-bit. |
| |
| * ospf_lsa.c (ospf_get_nssa_ip): Get 1st IP connection for Forward |
| Addr. |
| (ospf_install_flood_nssa): Leave Type-7 LSA at Lock Count = 2. |
| |
| * ospf_ase.c (ospf_ase_calculate_route): Add debug codes. |
| |
| * ospf_abr.c (ospf_abr_translate_nssa): Recalculate LSA checksum. |
| |
| * ospf_packet.h (OSPF_SEND_PACKET_LOOP): Added for test packet. |
| |
| * ospf_dump.c (ospf_lsa_type_msg): Add OSPF_GROUP_MEMBER_LSA and |
| OSPF_AS_NSSA_LSA. |
| |
| * ospfd.c (data_injection): Function to inject LSA. This is |
| debugging command. |
| |
| 2001-01-11 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_route.c (ospf_route_match_same): Remove function. |
| (ospf_route_match_same_new): Renamed to ospf_route_match_same. |
| |
| * ospf_zebra.c (ospf_interface_address_delete): Add check for |
| oi->address. Suggested by Matthew Grant |
| <grantma@anathoth.gen.nz>. |
| (ospf_zebra_add): Remove function. |
| (ospf_zebra_add_multipath): Rename to ospf_zebra_add. |
| |
| * ospf_interface.c: Remove HAVE_IF_PSEUDO part. |
| |
| * ospf_zebra.c: Likewise. |
| |
| 2001-01-10 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_ase.c: Remove OLD_RIB part. |
| |
| * ospf_route.c: Likewise. |
| |
| * zebra-0.90 is released. |
| |
| * ospf_packet.c (ospf_recv_packet): Use ip_len adjestment code to |
| NetBSD. |
| |
| 2001-01-09 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_route.c (ospf_route_delete): Use |
| ospf_zebra_delete_multipath. |
| |
| 2001-01-09 Matthew Grant <grantma@anathoth.gen.nz> |
| |
| * ospf_interface.c (ospf_if_cleanup): Function name is renamed |
| from ospf_if_free(). Rewrite whole procudure to support primary |
| address deletion. |
| |
| * ospf_zebra.c (ospf_interface_address_delete): Add primary |
| address deletion process. |
| |
| 2001-01-09 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_packet.c (ospf_recv_packet): OpenBSD has same ip_len |
| treatment like FreeBSD. |
| |
| 2001-01-09 endo@suri.co.jp (Masahiko Endo) |
| |
| * ospf_packet.c (ospf_recv_packet): FreeBSD kernel network code |
| strips IP header size from receiving IP Packet. So we adjust |
| ip_len to whole IP packet size by adding IP header size. |
| |
| 2001-01-08 endo@suri.co.jp (Masahiko Endo) |
| |
| * ospf_network.c (ospf_serv_sock): When socket() is failed return |
| immediately. |
| (ospf_serv_sock): Close socket when it is not used. |
| |
| * ospf_packet.c (ospf_write): Set sin_len when HAVE_SIN_LEN is |
| defined. |
| (ospf_write): When bind is fined, close sock. |
| |
| 2001-01-07 Gleb Natapov <gleb@nbase.co.il> |
| |
| * ospf_zebra.c (ospf_interface_state_up): Fixes coredump that |
| appears when you try to configure bandwidth on the ppp interface |
| that is not yet configured in ospfd. |
| |
| 2001-01-07 Michael Rozhavsky <mrozhavsky@opticalaccess.com> |
| |
| * ospf_route.c (show_ip_ospf_route_external): "show ip ospf route" |
| will print nexthops for AS-external routes. |
| |
| * ospf_ase.c (ospf_ase_route_match_same): New function to compare |
| ASE route under multipath environment. |
| (ospf_ase_compare_tables): Likewise. |
| |
| 2001-01-01 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospfd.h (OSPF_VTYSH_PATH): Change "/tmp/ospfd" to "/tmp/.ospfd". |
| |
| 2000-12-28 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_route.c (ospf_route_install): Install multipath information |
| to zebra daemon. |
| |
| * ospf_zebra.c (ospf_zebra_add_multipath): Function for passing |
| multipath information to zebra daemon. |
| |
| 2000-12-25 Dick Glasspool <dick@ipinfusion.com> |
| |
| * ospf_packet.c (ospf_write): Call ospf_packet_delete when sendto |
| fail. |
| (DISCARD_LSA): Add argument N for logging point of DISCARD_LSA is |
| called. |
| |
| * ospf_lsa.c (ospf_external_lsa_refresh): NSSA install_flood will |
| leave Type-7 LSA at Lock Count = 2. |
| |
| * ospf_flood.c (ospf_flood_through): Flood_though_as updated for |
| NSSA no P-bit off during Area flooding, but P-bit is turned off |
| for mulitple NSSA AS flooding. |
| |
| * ospf_ase.c (ospf_ase_calculate_timer): Added calculations for |
| Type-7 LSDB. |
| |
| * ospf_abr.c (ospf_abr_translate_nssa): Removed one unlock call. |
| (ospf_abr_announce_nssa_defaults): Corrected Debug from EVENT to |
| NSSA. |
| |
| 2000-12-25 Michael Rozhavsky <mrozhavsky@opticalaccess.com> |
| |
| * ospf_zebra.c (ospf_zebra_read_ipv4): Checking the age of the |
| found LSA and if the LSA is MAXAGE we should call refresh instead |
| of originate. |
| |
| 2000-12-18 Dick Glasspool <dick@ipinfusion.com> |
| |
| * ospf_abr.c: Removed redundant "...flood" in |
| announce_network_to_area(). Repaired nssa Unlock by using |
| discard. |
| |
| * ospf_packet.c: Removed old NSSA translate during mk_ls_update. |
| |
| * ospfd.c: Free up all data bases including NSSA. |
| |
| * ospf_lsa.c: Now allow removal of XLATE LSA's Check in |
| discard_callback. Added routine to get ip addr from within the |
| ifp. |
| |
| * ospf_flood.c: Now set Forward Address for outgoing Type-7. |
| |
| * ospf_lsa.h: Added prototype for the below. struct in_addr |
| ospf_get_ip_from_ifp (struct interface *ifp). |
| |
| 2000-12-14 Gleb Natapov <gleb@nbase.co.il> |
| |
| * ospf_packet.c (ospf_recv_packet): New OSPF pakcet read method. |
| Now maximum packet length may be 65535 bytes (maximum IP packet |
| length). |
| |
| * ospf_interface.c (ospf_if_stream_set): Don't make input buffer. |
| |
| * ospfd.c (config_write_network_area): Remove unnecessary area |
| lookup code. |
| |
| 2000-12-13 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_packet.c (ospf_read): Accept packet bigger than MTU value. |
| |
| 2000-12-13 Gleb Natapov <gleb@nbase.co.il> |
| |
| * ospfd.c (config_write_network_area): Fix bug in |
| config_write_network_area function. |
| |
| 2000-12-12 Gleb Natapov <gleb@nbase.co.il> |
| |
| * ospf_abr.c (ospf_abr_announce_network_to_area): Make Summary |
| LSA's origination and refreshment as same as other type of LSA. |
| |
| * ospf_lsa.c (ospf_summary_lsa_refresh): Return struct ospf_lsa *. |
| |
| * ospf_lsa.c (ospf_summary_asbr_lsa_refresh): Likewise. |
| |
| 2000-12-08 Dick Glasspool <dick@ipinfusion.com> |
| |
| The bulk of NSSA changes are contained herein; This version will |
| require manual setting of "always" for NSSA Translator, and will |
| not perform aggregation yet. |
| |
| * ospf_dump.c: "debug ospf nssa" is added. |
| |
| * ospf_dump.h: Likewise. |
| |
| * ospf_packet.c (ospf_hello): Display router ID on Bad NSSA Hello. |
| |
| * ospfd.c: Discard_LSA to stay away from LOCAL_XLT Process NSSA |
| 'never, candidate, always'. Change "suppress" to "not-advertise". |
| |
| * ospfd.h: Add TranslatorRole to struct ospf_area. Add anyNSSA to |
| struct ospf. |
| |
| * ospf_ase.c (ospf_ase_calculate_route): External to stay away |
| from LOCAL_XLT |
| |
| * ospf_nsm.c (ospf_db_summary_add): External to stay away from |
| LOCAL_XLT |
| |
| * ospf_abr.c: Major logic added for abr_nssa_task(). If ABR, and |
| NSSA translator, then do it. Approve the global list, and flush |
| any unapproved. |
| |
| * ospf_lsa.h: New LSA flag OSPF_LSA_LOCAL_XLT to indicate that the |
| Type-5 resulted from a Local Type-7 translation; not used for |
| flooding, but used for flushing. |
| |
| * ospf_flood.c: New NSSA flooding. |
| |
| 2000-12-08 Michael Rozhavsky <mrozhavsky@opticalaccess.com> |
| |
| * ospfd.c (ospf_find_vl_data): New function for looking up virtual |
| link data. |
| (ospf_vl_set_security): Virtual link configuration with |
| authentication. |
| (ospf_vl_set_timers): Set timers for virtual link. |
| |
| * New commands are added. |
| "area A.B.C.D virtual-link A.B.C.D" |
| "area A.B.C.D virtual-link A.B.C.D hello-interval <1-65535> retransmit-interval <3-65535> transmit-delay <1-65535> dead-interval <1-65535>" |
| "area A.B.C.D virtual-link A.B.C.D hello-interval <1-65535> retransmit-interval <3-65535> transmit-delay <1-65535> dead-interval <1-65535> authentication-key AUTH_KEY" |
| "area A.B.C.D virtual-link A.B.C.D authentication-key AUTH_KEY" |
| "area A.B.C.D virtual-link A.B.C.D hello-interval <1-65535> retransmit-interval <3-65535> transmit-delay <1-65535> dead-interval <1-65535> message-digest-key <1-255> md5 KEY" |
| "area A.B.C.D virtual-link A.B.C.D message-digest-key <1-255> md5 KEY" |
| |
| * ospf_packet.c (ospf_check_md5_digest): Add neighbor's |
| cryptographic sequence number treatment. |
| (ospf_check_auth): OSPF input buffer is added to argument. |
| (ospf_read): Save neighbor's cryptographic sequence number. |
| |
| * ospf_nsm.c (nsm_change_status): Clear cryptographic sequence |
| number when neighbor status is changed to NSM down. |
| |
| * ospf_neighbor.c (ospf_nbr_new): Set zero to crypt_seqnum. |
| |
| * ospf_neighbor.h (struct ospf_neighbor): Add cryptographic |
| sequence number to neighbor structure. |
| |
| 2000-11-29 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_snmp.c (ospfIfLookup): OSPF MIB updates. |
| (ospfExtLsdbEntry): Add OspfExtLsdbTable treatment. |
| |
| 2000-11-28 Michael Rozhavsky <mrozhavsky@opticalaccess.com> |
| |
| * ospfd.c (ospf_interface_down): Clear a ls_upd_queue queue of the |
| interface. |
| (ospf_ls_upd_queue_empty): New function to empty ls update queue |
| of the OSPF interface. |
| (no_router_ospf): 'no router ospf' unregister redistribution |
| requests from zebra. |
| |
| 2000-11-28 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_ism.c (ism_change_status): Increment status change number. |
| |
| * ospf_interface.h (struct ospf_interface): Add new member for |
| status change statistics. |
| |
| * Makefile.am: Update dependencies. |
| |
| * ospf_zebra.c (ospf_interface_add): OSPF SNMP interface update. |
| (ospf_interface_delete): OSPF SNMP interface delete. |
| |
| * ospf_snmp.h: New file is added. |
| |
| 2000-11-23 Dick Glasspool <dick@ipinfusion.com> |
| |
| * ospfd.h: Add new ospf_area structure member for |
| NSSATranslatorRole and NSSATranslator state. |
| |
| * ospfd.c: Provided for eventual commands to specify NSSA |
| elections for "translator- ALWAYS/NEVER/CANDIDATE". Provided for |
| decimal integer version of area-suppress. |
| |
| * ospf_flood.c: Flood Type-7's only into NSSA (not AS). |
| |
| * ospf_lsa.c: Undo some previous changes for NSSA. If NSSA |
| translator, advertise Nt bit. |
| |
| * ospf_route.c: 1st version of "sh ip os border-routers". |
| |
| 2000-11-23 Michael Rozhavsky <mrozhavsky@opticalaccess.com> |
| |
| * ospfd.c (area_vlink): Virtual link can not configured in stub |
| area. |
| |
| 2000-11-23 Gleb Natapov <gleb@nbase.co.il> |
| |
| * ospf_packet.c (ospf_db_desc): In states Loading and Full the |
| slave must resend its last Database Description packet in response |
| to duplicate Database Description packets received from the |
| master. For this reason the slave must wait RouterDeadInterval |
| seconds before freeing the last Database Description packet. |
| Reception of a Database Description packet from the master after |
| this interval will generate a SeqNumberMismatch neighbor |
| event. RFC2328 Section 10.8 |
| (ospf_make_db_desc): DD Master flag treatment. |
| |
| * ospf_nsm.c (nsm_twoway_received): Move DD related procedure to |
| nsm_change_status(). |
| (nsm_bad_ls_req): Likewise. |
| (nsm_adj_ok): Likewise. |
| (nsm_seq_number_mismatch): Likewise. |
| (nsm_oneway_received): Likewise. |
| |
| * ospf_neighbor.h (struct ospf_neighbor): New structure member |
| last_send_ts for timestemp when last Database Description packet |
| was sent. |
| |
| * ospf_nsm.c (ospf_db_desc_timer): Make it sure nbr->last_send is |
| there. Call ospf_db_desc_resend() in any case. |
| |
| 2000-11-16 Michael Rozhavsky <mrozhavsky@opticalaccess.com> |
| |
| * ospf_lsa.c (lsa_link_broadcast_set): When there is no DR on |
| network (suppose you have only one router with interface priority |
| 0). It's router LSA does not contain the link information about |
| this network. |
| |
| * ospf_nsm.c (nsm_timer_set): When you change a priority of |
| interface from/to 0 ISM_NeighborChange event should be scheduled |
| in order to elect new DR/BDR on the network. |
| |
| * ospf_interface.c (ip_ospf_priority): Likewise. |
| |
| * ospf_flood.c (ospf_ls_retransmit_add): When we add some LSA into |
| retransmit list we need to check whether the present old LSA in |
| retransmit list is not more recent than the new |
| one. |
| |
| 2000-11-09 Dick Glasspool <dick@ipinfusion.com> |
| |
| * ospf_packet.c: Allows for NSSA Type-7 LSA's throughout the NSSA |
| area. Any that exit the NSSA area are translated to type-5 LSA's. |
| The instantiated image is restored after translation. |
| (ospf_ls_upd_send_list): Renamed to ospf_ls_upd_queu_send(). |
| (ospf_ls_upd_send): Old function which enclosed by #ifdef 0 is |
| removed. |
| (ospf_ls_ack_send): Likewise. |
| |
| * ospf_flood.c: NSSA-LSA's without P-bit will be restricted to |
| local area. Otherwise they are allowed out the area to be |
| translated by ospf_packet.c. |
| |
| * ospf_lsa.c: Undo some previous changes for NSSA. |
| |
| * ospf_lsdb.h: New access for type 7. |
| |
| 2000-11-07 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_route.c (ospf_path_exist): New function to check nexthop |
| and interface are in current OSPF path or not. |
| (ospf_route_copy_nexthops_from_vertex): Add nexthop to OSPF path |
| when it is not there. Reported by Michael Rozhavsky |
| <mrozhavsky@opticalaccess.com> |
| |
| 2000-11-06 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_dump.c (config_write_debug): Add seventh string "detail" is |
| added for flag is OSPF_DEBUG_SEND | OSPF_DEBUG_RECV | |
| OSPF_DEBUG_DETAIL. |
| |
| 2000-11-06 Michael Rozhavsky <mrozhavsky@opticalaccess.com> |
| |
| * ospf_lsa.c (router_lsa_flags): ASBR can't exit in stub area. |
| |
| 2000-11-06 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_lsa.c (ospf_router_lsa_originate): Reduce unconditional |
| logging. |
| |
| 2000-11-06 Dick Glasspool <dick@ipinfusion.com> |
| |
| * ospfd.h: Add ait_ntoa function prototype. |
| |
| * ospfd.c (ait_ntoa): New function for displaying area ID and |
| Stub/NSSA status. |
| (show_ip_ospf_interface_sub): Use ait_ntoa. |
| (show_ip_ospf_nbr_static_detail_sub): Likewise. |
| (show_ip_ospf_neighbor_detail_sub): Likewise. |
| |
| * ospf_route.c (ospf_intra_route_add): Set external routing type |
| to ospf route. |
| (ospf_intra_add_router): Likewise. |
| (ospf_intra_add_transit): Likewise. |
| (ospf_intra_add_stub): Likewise. |
| (ospf_add_discard_route): Likewise. |
| (show_ip_ospf_route_network): Use ait_ntoa. |
| (show_ip_ospf_route_network): Likewise. |
| (show_ip_ospf_route_router): Likewise. |
| |
| * ospf_lsa.c (show_lsa_detail): Use ait_ntoa. |
| (show_lsa_detail_adv_router): Likewise. |
| (show_ip_ospf_database_summary): Likewise. |
| |
| * ospf_route.h (struct route_standard): Add new member |
| external_routing. |
| |
| * ospf_ia.c (process_summary_lsa): Set external routing tyep to ospf |
| route. |
| (ospf_update_network_route): Likewise. |
| (ospf_update_router_route): Likewise. |
| |
| 2000-11-04 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_flood.c (ospf_process_self_originated_lsa): Enclose |
| OSPF_AS_NSSA_LSA treatment with #ifdef HAVE_NSSA. |
| |
| 2000-11-03 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * Unconditional logging is enclosed with if (IS_DEBUG_OSPF_EVENT). |
| Please specify "debug ospf event" for enable logging. |
| |
| * ospf_ism.c: Do not extern debug flag varible. It is done by |
| ospf_debug.h |
| * ospf_asbr.c: Likewise. |
| * ospf_lsa.c: Likewise. |
| * ospf_nsm.c: Likewise. |
| * ospf_zebra.c: Likewise. |
| |
| * ospf_dump.c (debug_ospf_event): New command "debug ospf event" |
| is added. |
| |
| * ospfd.c (router_ospf): Change logging from vty_out() to |
| zlog_info(). |
| (ospf_area_stub_cmd): Likewise. |
| |
| * ospf_dump.h: Extern term_debug flags. |
| (OSPF_DEBUG_EVENT): Add new flag. |
| (IS_DEBUG_OSPF_EVENT): Add new macro. |
| |
| 2000-11-03 Dick Glasspool <dick@ipinfusion.com> |
| |
| * ospf_flood.c (ospf_process_self_originated_lsa): |
| OSPF_AS_NSSA_LSA is treated as same as OSPF_AS_EXTERNAL_LSA. |
| (ospf_flood): Type-5's have no change. Type-7's can be received, |
| and will Flood the AS as Type-5's They will also flood the local |
| NSSA Area as Type-7's. The LSDB will be updated as Type-5's, and |
| during re-fresh will be converted back to Type-7's (if within an |
| NSSA). |
| (ospf_flood_through): Incoming Type-7's were allowed here if our |
| neighbor was an NSSA. So Flood our area with the Type-7 and also |
| if we are an ABR, flood thru AS as Type-5. |
| |
| * ospf_lsa.c (ospf_external_lsa_refresh): Flood NSSA both NSSA |
| area and other area. |
| |
| * ospf_packet.c (ospf_db_desc_proc): When AS External LSA is |
| exists in DD packet, make it sure that this area is not stub. |
| (ospf_ls_upd_list_lsa): When LSA type is NSSA then set lsa's area |
| to NULL. |
| (ospf_ls_upd): If the LSA is AS External LSA and the area is stub |
| then discard the lsa. If the LSA is NSSA LSA and the area is not |
| NSSA then discard the lsa. |
| |
| 2000-11-03 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospfd.c (ospf_interface_run): Fix bug of Hello packet's option |
| is not properly set when interface comes up. |
| |
| 2000-11-02 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospfd.h (OSPF_OPTION_O): Add new hello header option. |
| |
| 2000-11-01 Dick Glasspool <dick@ipinfusion.com> |
| |
| * ospf_lsa.h: Define OSPF_MAX_LSA to 8 when HAVE_NSSA is enabled. |
| (OSPF_GROUP_MEMBER_LSA): Define OSPF_GROUP_MEMBER_LSA. |
| |
| * ospf_lsa.c (show_database_desc): Add "Group Membership LSA" |
| string. |
| |
| 2000-10-31 Dick Glasspool <dick@ipinfusion.com> |
| |
| * ospf_lsa.h (OSPF_AS_NSSA_LSA): Define OSPF_AS_NSSA_LSA. |
| |
| * ospf_lsa.c (show_ip_ospf_database): NSSA database display |
| function is added. ALIASES which have "show ip ospf database |
| nssa-external" is added. |
| (show_ip_ospf_border_routers): New command "show ip ospf |
| border-routers" is added. |
| |
| 2000-10-30 Dick Glasspool <dick@ipinfusion.com> |
| |
| * ospfd.c (router_ospf): NSSA Enabled message is added for |
| testing. |
| (ospf_area_type_set): Are type set for NSSA area. |
| (ospf_area_stub_cmd): Special translation of no_summary into NSSA |
| and summary information. If NSSA is enabled pass the information |
| to ospf_area_type_set(). |
| (area_nssa): New commands are added: |
| "area A.B.C.D nssa" |
| "area <0-4294967295> nssa" |
| "area A.B.C.D nssa no-summary" |
| "area <0-4294967295> nssa no-summary" |
| (ospf_no_area_stub_cmd): Special translation of no_summary into |
| NSSA and summary information. If external_routing is |
| OSPF_AREA_NSSA unset area with ospf_area_type_set (area, |
| OSPF_AREA_DEFAULT). |
| (show_ip_ospf_area): Display NSSA status. |
| (config_write_ospf_area): Show NSSA configuration. |
| |
| * ospf_packet.c (ospf_hello): For NSSA support, ensure that NP is |
| on and E is off. |
| |
| 2000-10-26 Gleb Natapov <gleb@nbase.co.il> |
| |
| * ospf_lsa.c (ospf_network_lsa_body_set): The network-LSA lists |
| those routers that are fully adjacent to the Designated Router; |
| each fully adjacent router is identified by its OSPF Router ID. |
| The Designated Router includes itself in this list. RFC2328, |
| Section 12.4.2. |
| |
| 2000-10-23 Jochen Friedrich <jochen@scram.de> |
| |
| * ospf_snmp.c: ospf_oid and ospfd_oid are used in smux_open after |
| it is registered. So those variables must be static. |
| |
| 2000-10-18 K N Sridhar <sridhar@euler.ece.iisc.ernet.in> |
| |
| * ospfd.c: Add area_default_cost_decimal_cmd and |
| no_area_default_cost_decimal_cmd alias. |
| |
| 2000-10-05 Gleb Natapov <gleb@nbase.co.il> |
| |
| * ospfd.c (ospf_network_new): Fix setting area format. |
| (no_router_ospf): Check area existance when calling |
| ospf_interface_down(). |
| |
| * ospf_flood.c (ospf_external_info_check): Fix bug of refreshing |
| default route. |
| |
| 2000-10-02 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * zebra-0.89 is released. |
| |
| 2000-09-29 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_snmp.c (ospfHostEntry): OSPF Host MIB is implemented. |
| |
| * ospfd.c (ospf_nbr_static_cmp): OSPF neighbor is sorted by it's |
| address. |
| |
| 2000-09-28 Michael Rozhavsky <mike@nbase.co.il> |
| |
| * ospf_interface.c (ospf_if_free): Fix deleting self neighbor twice. |
| |
| 2000-09-27 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_packet.c (ospf_read): Solaris on x86 has ip_len with host |
| byte order. |
| |
| 2000-09-25 Toshiaki Takada <takada@zebra.org> |
| |
| * ospfd.c (ospf_compatible_rfc1583), (no_ospf_compatible_rfc1583): |
| Add CISCO compatible command. |
| |
| 2000-09-25 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_abr.c (ospf_area_range_lookup): New function is added for |
| area range lookup in OSPF-MIB. |
| (ospf_area_range_lookup_next): Likewise. |
| |
| 2000-09-22 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospfd.c (no_router_ospf): Delete virtual link before deleting |
| area structure. |
| |
| * ospf_lsa.c (ospf_external_lsa_refresh_type): Check |
| EXTERNAL_INFO(type). |
| |
| * ospfd.c (no_router_ospf): Call ospf_vl_delete() instead of |
| ospf_vl_data_free(). |
| |
| * ospf_interface.c (ospf_vl_shutdown): Execute ISM_InterfaceDown |
| when ospf_vl_shutdown is called. |
| (ospf_vl_delete): Call ospf_vl_shutdown() to delete virtual link |
| interface's thread. |
| |
| 2000-09-21 Gleb Natapov <gleb@nbase.co.il> |
| |
| * ospf_lsa.c: New implementation of OSPF refresh. |
| |
| 2000-09-20 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_snmp.c (ospfLsdbLookup): Add LSDB MIB implementation. |
| |
| 2000-09-18 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_snmp.c (ospfStubAreaEntry): Add OSPF stub area MIB. |
| |
| 2000-09-18 Gleb Natapov <gleb@nbase.co.il> |
| |
| * ospf_route.h (route_standard): Change member from `struct area' |
| to area_id. |
| |
| * ospf_abr.c (ospf_abr_announce_network), (ospf_abr_should_announce), |
| (ospf_abr_process_network_rt), (ospf_abr_announce_rtr), |
| (ospf_abr_process_router_rt): |
| * ospf_ase.c (ospf_find_asbr_route), |
| (ospf_find_asbr_router_through_area), |
| * ospf_ia.c (ospf_find_abr_route), (ospf_ia_router_route), |
| (process_summary_lsa), (ospf_update_network_route), |
| (ospf_update_router_route): |
| * ospf_route.c (ospf_intra_route_add), (ospf_intra_add_router), |
| (ospf_intra_add_transit), (ospf_intra_add_stub), |
| (ospf_route_table_dump), (show_ip_ospf_route_network), |
| (show_ip_ospf_route_router), (ospf_asbr_route_cmp), |
| (ospf_prune_unreachable_routers): |
| * ospf_spf.c (ospf_rtrs_print): |
| * ospfd.c (ospf_rtrs_free): Fix the struct change above. |
| |
| 2000-09-14 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_network.c (ospf_serv_sock_init): Enclose SO_BINDTODEVICE |
| with ifdef. |
| |
| 2000-09-13 Gleb Natapov <gleb@nbase.co.il> |
| |
| * ospf_ism.c (ospf_elect_dr), (ospf_elect_bdr): Fix DR election. |
| |
| * ospf_network.c (ospf_serv_sock_init): Add socket option |
| SO_BINDTODEVICE on read socket. |
| |
| * ospf_packet.c (ospf_hello): Ignore Hello packet if E-bit does |
| not match. |
| |
| * ospfd.c (ospf_area_check_free), (ospf_area_get), |
| (ospf_area_add_if): New function added. |
| |
| 2000-09-13 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_route.c (ospf_intra_add_router): Update ABR and ASBR router |
| count. |
| |
| * ospf_spf.c (ospf_spf_init): Rest ABR and ASBR router count |
| starting SPF calculation. |
| |
| * ospfd.h (struct ospf_area): Add ABR and ASBR router count. |
| |
| 2000-09-12 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospfd.c (ospf_area_id_cmp): New area structure is sorted by area |
| ID. |
| |
| * ospf_lsa.c (ospf_router_lsa_originate): For OSPF MIB update |
| lsa_originate_count. |
| (ospf_network_lsa_originate): Likewise. |
| (ospf_summary_lsa_originate): Likewise. |
| (ospf_summary_asbr_lsa_originate): Likewise. |
| (ospf_external_lsa_originate): Likewise. |
| |
| 2000-09-11 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_snmp.c (ospf_variables): ospfRouterID's type RouterID |
| syntax is IpAddress. |
| (ospf_admin_stat): New function for OSPF administrative status |
| check. |
| |
| 2000-09-10 Jochen Friedrich <jochen@scram.de> |
| |
| * ospf_snmp.c: Implement OSPF MIB skeleton. |
| |
| 2000-09-08 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_snmp.c: New file is added. |
| |
| 2000-09-07 David Lipovkov <davidl@nbase.co.il> |
| |
| * ospf_zebra.c (ospf_interface_delete): Add pseudo interface |
| treatment. |
| |
| * ospf_interface.c (interface_config_write): Likewise. |
| |
| 2000-08-17 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * zebra-0.88 is released. |
| |
| 2000-08-17 Michael Rozhavsky <mike@nbase.co.il> |
| |
| * ospfd.c (ospf_area_free): Remove virtual link configuration only |
| when Area is removed. |
| |
| 2000-08-17 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospfd.c (network_area): Revert check for EXTERNAL_INFO |
| (ZEBRA_ROUTE_CONNECT). |
| (no_network_area): Likewise. |
| |
| 2000-08-16 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospfd.h (struct ospf): Add distance_table and |
| distance_{all,intra,inter,external}. |
| |
| * ospf_zebra.c: Add OSPF distance related functions. |
| |
| 2000-08-15 Gleb Natapov <gleb@nbase.co.il> |
| |
| * ospf_asbr.c (ospf_external_info_find_lsa): New function added. |
| |
| * ospf_lsa.c (ospf_default_external_info), |
| (ospf_default_originate_timer), (ospf_external_lsa_refresh_default): |
| New function added. |
| |
| * ospf_zebra.c |
| (ospf_default_information_originate_metric_type_routemap), |
| (ospf_default_information_originate_always_metric_type_routemap): |
| Change name and add route-map function. |
| (ospf_default_information_originate_metric_routemap), |
| (ospf_default_information_originate_routemap), |
| (ospf_default_information_originate_type_metric_routemap): |
| New DEFUN added. |
| |
| 2000-08-14 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_zebra.c (zebra_interface_if_set_value): Change ifindex |
| restore size from two octet to four. |
| |
| 2000-08-14 Michael Rozhavsky <mike@nbase.co.il> |
| |
| * ospf_ase.c (ospf_ase_incremental_update): Implement incremental |
| AS-external-LSA in 16.6 of RFC2328. |
| |
| 2000-08-14 Matthew Grant <grantma@anathoth.gen.nz> |
| |
| * ospf_interface.c (ospf_if_get_output_cost): Change cost |
| calculation algorithm. |
| |
| * ospf_packet (ospf_ls_upd): Fix problem of LSA retransmitting. |
| |
| 2000-08-11 Michael Rozhavsky <mike@nbase.co.il> |
| |
| * ospf_lsa.c (ospf_maxage_lsa_remover): Fix maxage remover for |
| AS-external-LSAs. |
| |
| 2000-08-10 Toshiaki Takada <takada@zebra.org> |
| |
| * ospfd.c (auto_cost_reference_bandwidth): New DEFUN added. |
| `auto-cost reference-bandwidth' OSPF router command added. |
| |
| 2000-08-08 Gleb Natapov <gleb@nbase.co.il> |
| |
| * ospf_routemap.c (ospf_route_map_update): New function added. |
| Add route-map event hook. |
| |
| 2000-08-08 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_zebra.c (ospf_distribute_check_connected): If redistribute |
| prefix is connected route on OSPF enabled interface, suppress to |
| announce it. |
| |
| 2000-08-08 Matthew Grant <grantma@anathoth.gen.nz> |
| |
| * ospf_interface.c (ospf_if_get_output_cost): |
| New function added. Handle bandwidth parameter for cost |
| calculation. |
| |
| 2000-08-08 Michael Rozhavsky <mike@nbase.co.il> |
| |
| * ospf_interface.c (interface_config_write): Show interface |
| configuration regardless interface is down. |
| |
| * ospf_ase.c (ospf_ase_caocluate_route): Whole rewritten external |
| route calculate function. |
| |
| 2000-08-08 Gleb Natapov <gleb@nbase.co.il> |
| |
| * ospf_routemap.c: New file added. |
| |
| * ospf_asbr.c (ospf_reset_route_map_set_values), |
| (ospf_route_map_set_compare): New function added. |
| |
| * ospf_lsa.c (ospf_external_lsa_body_set): Set routemap metric |
| with AS-external-LSA. |
| |
| 2000-08-05 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_ase.c (ospf_ase_calculate_route_add): Pass new->cost to |
| ospf_zebra_add as metric. |
| (ospf_ase_calculate_route_add): Likewise. |
| |
| * ospf_route.c (ospf_route_install): Pass or->cost to |
| ospf_zebra_add as metric. |
| |
| * ospf_zebra.c (ospf_zebra_add): Add metric arguemnt. |
| (ospf_zebra_delete): Likewise. |
| |
| 2000-08-03 Matthew Grant <grantma@anathoth.gen.nz> |
| |
| * ospf_flood.c (ospf_flood_delayed_lsa_ack): New function added. |
| Dispatch delayed-ACK with flooding AS-external-LSA across virtual |
| link. |
| |
| 2000-07-31 Matthew Grant <grantma@anathoth.gen.nz> |
| |
| * ospfd.c (show_ip_ospf_area): Fix lack of VTY_NEWLINE when |
| `show ip ospf'. |
| |
| * ospf_interface.c (ospf_if_free): Fix bug of crash with |
| Point-to-Point interface. |
| |
| 2000-07-27 Michael Rozhavsky <mike@nbase.co.il> |
| |
| * ospf_flood.c (ospf_process_self_originated_lsa): |
| Make sure to clear LSA->param (redistributed external information) |
| before refreshment. |
| |
| 2000-07-27 Gleb Natapov <gleb@nbase.co.il> |
| |
| * ospfd.c (refresh_group_limit), (refresh_per_slice), |
| (refresh_age_diff): New defun added. Refresher related parameter |
| can be configurable. |
| |
| 2000-07-27 Akihiro Mizutani <mizutani@dml.com> |
| |
| * ospf_interface.c (interface_config_write): Print `description' |
| config directive to work. |
| |
| 2000-07-24 Akihiro Mizutani <mizutani@dml.com> |
| |
| * ospf_interface.c (ospf_if_init): Use install_default for |
| INTERFACE_NODE. |
| |
| 2000-07-24 Gleb Natapov <gleb@nbase.co.il> |
| |
| * ospf_packet.c (ospf_ls_upd_send_list), (ospf_ls_upd_send_event), |
| (ospf_ls_ack_send_list), (ospf_ls_ack_send_event): New function added. |
| This make sending always as many LS update/Ack combined in one ospf |
| packet. |
| |
| 2000-07-24 Gleb Natapov <gleb@nbase.co.il> |
| |
| * ospf_packet.c (ospf_ls_upd_list_lsa): Set NULL to lsa->area if |
| LSA is AS-external-LSA. |
| |
| * ospf_nsm.c (nsm_reset_nbr): Do not cancel Inactivity timer. |
| |
| 2000-07-21 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_zebra.c (ospf_default_originate_timer): Set timer for |
| `default-information originate'. Fix some default originate |
| related functions. |
| |
| 2000-07-12 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_lsa.c (stream_put_ospf_metric): New function added. |
| |
| 2000-07-12 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_lsa.c (show_ip_ospf_database_router), |
| (show_ip_ospf_database_network), (show_ip_ospf_database_summary), |
| (show_ip_ospf_database_summary_asbr), (show_ip_ospf_database_externel), |
| (show_router_lsa), (show_any_lsa), (show_router_lsa_self), |
| (show_any_lsa_self): Functions removed. |
| |
| (show_lsa_prefix_set), (show_lsa_detail_proc), (show_lsa_detail), |
| (show_lsa_detail_adv_router_proc), (show_lsa_detail_adv_router): |
| New functions added. Replace above functions. |
| |
| (show_ip_ospf_database_all), (show_ip_ospf_database_self_originated): |
| Functions removed. |
| (show_ip_ospf_database_summary): New functions added. Replace |
| above functions. |
| |
| (show_ip_ospf_database_cmd): DEFUN rearranged. |
| (show_ip_ospf_database_type_id_cmd), |
| (show_ip_ospf_database_type_id_adv_router_cmd), |
| (show_ip_ospf_database_type_is_self_cmd): New ALIASes added. |
| (show_ip_ospf_database_type_adv_rotuer_cmd): New DEFUN added. |
| (show_ip_ospf_database_type_self_cmd): New ALIAS added. |
| |
| 2000-07-11 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_asbr.c (ospf_external_info_new), |
| (ospf_external_info_free): New functions added. |
| |
| * ospf_lsa.h (ospf_lsa): Add new member `void *param' to set |
| origination parameter for external-LSA. |
| Remove member `redistribute'. |
| |
| * ospf_zebra.c (ospf_redistirbute_set): When `redistribute' |
| command executed, metric and metric-type values are overridden. |
| If one of those is changed refresh AS-external-LSAs for appropriate |
| type. |
| |
| 2000-07-11 Michael Rozhavsky <mike@nbase.co.il> |
| |
| * ospf_lsa.c (ospf_summary_lsa_refresh), |
| (ospf_summary_asbr_lsa_refresh): Make sure to refresh summary-LSAs. |
| |
| * ospf_abr.c (set_metric): New function added. |
| |
| 2000-07-07 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_zebra.c (ospf_default_information_originate_metric_type), |
| (ospf_default_information_originate_type_metric): New defun added. |
| Metic and Metric type can be set to default route. |
| (ospf_default_information_originate_always_metric_type): |
| (ospf_default_information_originate_always_type_metric): |
| New defun added. Metric and Metric type can be set to default |
| always route. |
| |
| * ospf_zebra.c (ospf_default_metric), (no_ospf_default_metric): |
| New defun added. |
| |
| 2000-07-06 Gleb Natapov <gleb@nbase.co.il> |
| |
| * ospf_flood.c (ospf_flood_through_area): Fix bug of considering |
| on the same interface the LSA was received from. |
| |
| 2000-07-06 Michael Rozhavsky <mike@nbase.co.il> |
| |
| * ospfd.c (ospf_config_write): Fix bug of printing `area stub' |
| command with `write mem'. |
| |
| * ospfd.c (no_router_ospf): Remove installed routes from zebra. |
| |
| * ospf_zebra.c (ospf_interface_delete): Fix function to handle |
| zebra interface delete event. |
| |
| 2000-07-06 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_zebra.c (ospf_default_information_originate), |
| (ospf_default_information_originate_always): New DEFUN added. |
| |
| 2000-07-05 Michael Rozhavsky <mike@nbase.co.il> |
| |
| * ospf_route.c (ospf_terminate): Make sure to remove external route |
| when SIGINT received. |
| |
| 2000-07-03 Gleb Natapov <gleb@nbase.co.il> |
| |
| * ospf_flood.c, ospf_ism.c, ospf_lsa,c, ospfd.c: Make sure to free |
| many structure with `no router ospf'. |
| |
| 2000-06-30 Gleb Natapov <gleb@nbase.co.il> |
| |
| * ospf_neighbor.c (ospf_nbr_new), |
| ospf_nsm.c (nsm_timer_set): Start LS update timer only |
| when neighbor enters Exchange state. |
| |
| 2000-06-29 Gleb Natapov <gleb@nbase.co.il> |
| |
| * ospf_nsm.c (nsm_timer_set), (nsm_exchange_done), |
| ospf_packet.c (ospf_db_desc_proc): |
| Do not cancel DD retransmit timer when Master. |
| |
| 2000-06-29 Gleb Natapov <gleb@nbase.co.il> |
| |
| * ospf_abr.c (ospf_abr_announce_network_to_area), |
| (ospf_abr_announce_rtr_to_area) |
| ospf_ase.c (ospf_ase_rtrs_register_lsa), |
| ospf_flood.c (ospf_process_self_originated_lsa), |
| (ospf_flood_through_area), (ospf_ls_request_delete), |
| ospf_interface.c (ospf_if_free), |
| ospf_ism.c (ism_change_status), |
| ospf_lsa.c (ospf_router_lsa_update_timer), |
| (ospf_router_lsa_install), (ospf_network_lsa_install), |
| (ospf_lsa_maxage_delete), (ospf_lsa_action), |
| (ospf_schedule_lsa_flood_area), |
| ospf_nsm.c (nsm_change_status), |
| ospf_packet.c (ospf_make_ls_req_func), (ospf_make_ls_ack): |
| Use ospf_lsa_{lock,unlock} for all looking-up of LSA. |
| |
| * ospf_flood.c (ospf_ls_request_free): Function deleted. |
| |
| * ospf_lsa.c (ospf_discard_from_db): New function added. |
| |
| 2000-06-26 Toshiaki Takada <takada@zebra.org> |
| |
| * ospfd.h (ospf): struct member `external_lsa' name changed to |
| `lsdb'. |
| |
| 2000-06-26 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_lsa.c (ospf_lsa_install), (ospf_router_lsa_install), |
| (ospf_network_lsa_install), (ospf_summary_lsa_install), |
| (ospf_summary_asbr_lsa_install), (ospf_external_lsa_install): |
| Functions re-arranged. |
| |
| * ospf_lsa.c (IS_LSA_MAXAGE), (IS_LSA_SELF): Macro added. |
| |
| 2000-06-20 Michael Rozhavsky <mike@nbase.co.il> |
| |
| * ospf_packet.c (ospf_ls_req), (ospf_ls_upd), (ospf_ls_ack): Add |
| verification of LS type. |
| |
| 2000-06-20 Gleb Natapov <gleb@nbase.co.il> |
| |
| * ospf_ase.c (ospf_ase_calculate_timer): Add more sanity check |
| whether rn->info is NULL. |
| |
| 2000-06-20 Toshiaki Takada <takada@zebra.org> |
| |
| * ospfd.c (show_ip_ospf_interface_sub): Show Router-ID of both |
| DR and Backup correctly with `show ip ospf interface' command. |
| |
| 2000-06-20 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_lsa.c (ospf_lsa_lock), (ospf_lsa_unlock), |
| (ospf_lsa_discard): These functions are used for avoiding |
| unexpected reference to freed LSAs. |
| |
| 2000-06-13 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_packet.c (ospf_ls_upd): Initialize lsa by NULL to avoid |
| warning. |
| |
| 2000-06-12 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_ase.h (ospf_ase_rtrs_register_lsa): Add prototype. |
| |
| 2000-06-12 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_lsa.c (ospf_external_lsa_install): Make sure to register |
| LSA to rtrs_external when replacing AS-external-LSAs in LSDB. |
| Fix core dump. |
| |
| 2000-06-10 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_lsdb.c (id_to_prefix), (ospf_lsdb_hash_key), |
| (ospf_lsdb_hash_cmp), (ospf_lsdb_new), (ospf_lsdb_iterator), |
| (lsdb_free), (ospf_lsdb_free), (ospf_lsdb_add), (ospf_lsdb_delete), |
| (find_lsa), (ospf_lsdb_lookup), (find_by_id), |
| (ospf_lsdb_lookup_by_id), (ospf_lsdb_lookup_by_header): Functinos |
| removed for migration to new_lsdb. |
| |
| * ospf_lsa.c (ospf_summary_lsa_install), |
| (ospf_summary_asbr_lsa_install), (ospf_maxage_lsa_remover), |
| (ospf_lsa_maxage_walker), (ospf_lsa_lookup), |
| (ospf_lsa_lookup_by_id): Use new_lsdb instead of ospf_lsdb. |
| (count_lsa), (ospf_lsa_count_table), (ospf_lsa_count), |
| (ospf_get_free_id_for_prefix): Funcitions removed. |
| |
| 2000-06-09 Gleb Natapov <gleb@nbase.co.il> |
| |
| * ospf_ism.c (ism_interface_down): Prevent some unneeded DR changes. |
| |
| * ospf_packet.c (ospf_db_desc_proc): Fix memory leak. |
| (ospf_hello): Always copy router-ID when hello is received. |
| |
| 2000-06-08 Gleb Natapov <gleb@nbase.co.il> |
| |
| * ospf_lsa.h (struct ospf_lsa): Add member of pointer to struct |
| ospf_area. |
| |
| 2000-06-08 Michael Rozhavsky <mike@nbase.co.il> |
| |
| * ospf_ase.c (ospf_asbr_route_same): New function added. |
| This function makes sure external route calculation more |
| precisely. |
| |
| 2000-06-07 Michael Rozhavsky <mike@nbase.co.il> |
| |
| * ospf_ism.c (ism_change_status): Use ospf_lsa_flush_area for |
| network-LSA deletion instead of using ospf_lsdb_delete. |
| Also cancel network-LSA origination timer. |
| |
| 2000-06-07 Levi Harper <lharper@kennedytech.com> |
| |
| * ospf_interface.c (ospf_if_down): Close read fd when an interface |
| goes down. |
| |
| 2000-06-05 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_asbr.c (ospf_external_info_lookup): Add explicit brace for |
| avoid ambiguous else. |
| |
| * ospf_flood.c (ospf_external_info_check): Likewise. |
| |
| 2000-06-05 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_nsm.c (nsm_adj_ok): Fix bug of DR election. |
| |
| 2000-06-04 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_zebra.c (ospf_default_information_originate), |
| (no_ospf_default_information_originate): New DEFUN added. |
| |
| 2000-06-03 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_lsa.h, ospf_asbr.h (external_info): Struct moved from |
| ospf_lsa.h to ospf_asbr.h. |
| |
| * ospf_lsa.c, ospf_asbr.c (ospf_external_info_add), |
| (ospf_external_info_delete): Function moved from ospf_lsa.c |
| to ospf_asbr.c. |
| |
| 2000-06-03 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_flood.c (ospf_external_info_check): New function added. |
| (ospf_process_self_orignated_lsa): Make sure to flush |
| self-originated AS-external-LSA, when router reboot and no longer |
| originate those AS-external-LSA. |
| |
| 2000-06-02 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_network.c (ospf_serv_sock): Remove SO_DONTROUTE |
| socket option. |
| |
| * ospf_packet.c (ospf_write): Set MSG_DONTROUTE flag for |
| unicast destination packets. |
| |
| 2000-06-02 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_lsdb.c (new_lsdb_delete): Delete entry from LSDB only when |
| specified LSA matches. |
| |
| 2000-06-02 Gleb Natapov <gleb@nbase.co.il> |
| |
| * ospf_network.c (ospf_serv_sock): Set SO_DONTROUTE |
| socket option. |
| |
| 2000-06-01 Akihiro Mizutani <mizutani@dml.com> |
| |
| * ospf_dump.c: Replace string `Debugging functions\n' with DEBUG_STR. |
| Replace string `OSPF information\n' with OSPF_STR. |
| |
| 2000-06-01 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_lsdb.[ch]: Use new_lsdb struct for network-LSA instead of |
| ospf_lsdb. |
| |
| 2000-06-01 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_dump.c (config_debug_ospf_packet), (config_debug_ospf_event), |
| (config_debug_ospf_ism), (config_debug_ospf_nsm), |
| (config_debug_ospf_lsa), (config_debug_ospf_zebra), |
| (term_debug_ospf_packet), (term_debug_ospf_event), |
| (term_debug_ospf_ism), (term_debug_ospf_nsm), |
| (term_debug_ospf_lsa), (term_debug_ospf_zebra): Repalce debug_ospf_* |
| variable to use for debug option flags. |
| |
| (debug_ospf_packet), (debug_ospf_ism), (debug_ospf_nsm), |
| (debug_ospf_lsa), (debug_ospf_zebra): Set {config,term}_debug_* |
| flags when vty->node is CONFIG_NODE, otherwise set only term_debug_* |
| flags. |
| |
| * ospf_dump.h (CONF_DEBUG_PACKET_ON), (CONF_DEBUG_PACKET_OFF), |
| (TERM_DEBUG_PACKET_ON), (TERM_DEBUG_PACKET_OFF), |
| (CONF_DEBUG_ON), (CONF_DEBUG_OFF), (IS_CONF_DEBUG_OSPF_PACKET), |
| (IS_CONF_DEBUG_OSPF): New Macro added. |
| |
| 2000-05-31 Toshiaki Takada <takada@zebra.org> |
| |
| * ospfd.c (clear_ip_ospf_neighbor): New DEFUN added. |
| Currently this command is used for only debugging. |
| |
| * ospf_nsm.c (nsm_change_status): Make sure thread cancellation |
| for network-LSA when DR has no full neighbors. |
| |
| * ospf_nsm.c (ospf_db_summary_clear): New function added. |
| |
| 2000-05-30 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_lsdb.c (new_lsdb_insert): LSAs are always freed by |
| maxage_lsa_remover when LSA is replaced. |
| |
| 2000-05-25 Gleb Natapov <gleb@nbase.co.il> |
| |
| * ospf_flood.c (ospf_ls_retransmit_delete_nbr_all): Add argument |
| `struct ospf_area' to remove LSA from Link State retransmission list |
| of neighbor from only one Area. |
| |
| 2000-05-24 Michael Rozhavsky <mike@nbase.co.il> |
| |
| * ospf_lsdb.c (ospf_lsdb_add): Preserve flags field when |
| overriting old LSA with new LSA. |
| |
| 2000-05-24 Gleb Natapov <gleb@nbase.co.il> |
| |
| * ospf_lsa.c (ospf_router_lsa_body_set): Fix bug of router-LSA |
| size calculation. |
| |
| 2000-05-22 Michael Rozhavsky <mike@nbase.co.il> |
| |
| * ospf_route.c (ospf_intra_add_stub): |
| * ospf_spf.h (struct vertex): Use u_int32_t for distance (cost) |
| value instead of u_int16_t. |
| |
| 2000-05-22 Axel Gerlach <agerlach@datus.datus.com> |
| |
| * ospf_ia.c (ospf_ia_network_route): Fix bug of Inter-area route |
| equal cost path calculation. |
| |
| 2000-05-21 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_ase.c (ospf_ase_calculate_route_delete): New function added. |
| Make sure, when rotuer route is deleted, related external routes |
| are also deleted. |
| |
| 2000-05-20 Toshiaki Takada <takada@zebra.org> |
| |
| * ospfd.c (ospf_interface_down): Make sure interface flag is disable |
| and set fd to -1. |
| |
| 2000-05-16 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_asbr.c (ospf_asbr_should_announce), (ospf_asbr_route_remove): |
| Functions removed. |
| |
| * ospfd.h (EXTERNAL_INFO): Macro added. |
| Substitute `ospf_top->external_info[type]' with it. |
| |
| 2000-05-16 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_lsa.c (ospf_rtrs_external_remove): New function added. |
| |
| 2000-05-14 Gleb Natapov <gleb@nbase.co.il> |
| |
| * ospf_flood.c (ospf_ls_retransmit_delete_nbr_all) |
| * ospf_lsdb.c (new_lsdb_insert) |
| * ospf_packet.c (ospf_ls_ack): Fix database synchonization problem. |
| |
| 2000-05-14 Gleb Natapov <gleb@nbase.co.il> |
| |
| * ospf_lsa.h (tv_adjust), (tv_ceil), (tv_floor), (int2tv), |
| (tv_add), (tv_sub), (tv_cmp): Prototype definition added. |
| |
| * ospf_nsm.h (ospf_db_summary_delete_all): Prototype definition added. |
| |
| 2000-05-13 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_lsa.[ch] (ospf_lsa): struct timestamp type is changed from |
| time_t to struct timeval. |
| (tv_adjust), (tv_ceil), (tv_floor), (int2tv), (tv_add), |
| (tv_sub), (tv_cmp): timeval utillity functions added. |
| |
| 2000-05-12 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_lsa.[ch] (ospf_schedule_update_router_lsas): Delete function. |
| Change to use macro OSPF_LSA_UPDATE_TIMER instead of using |
| this function. |
| router-LSA refresh timer related stuff is re-organized. |
| |
| 2000-05-10 Gleb Natapov <gleb@nbase.co.il> |
| |
| * ospf_interface.c (ospf_vl_set_params): |
| * ospf_packet.c (ospf_check_network_mask): |
| * ospf_spf.[ch] (ospf_spf_next): |
| Remove field address from `struct vertex', and search for peer |
| address of virtual link in function `ospf_vl_set_params' instead. |
| |
| 2000-05-10 Gleb Natapov <gleb@nbase.co.il> |
| |
| * ospf_packet.c (ospf_ls_upd): Fix some memory leak related LSA. |
| |
| 2000-05-08 Thomas Molkenbur <tmo@datus.com> |
| |
| * ospf_packet.c (ospf_packet_dup): Replace ospf_steram_copy() |
| with ospf_stream_dup() to fix memory leak. |
| |
| 2000-05-08 Michael Rozhavsky <mike@nbase.co.il> |
| |
| * ospf_flood.c (ospf_flood_through_area): Fix the problem of |
| LSA update without DROther. |
| |
| 2000-05-04 Gleb Natapov <gleb@nbase.co.il> |
| |
| * ospf_spf.c (ospf_vertex_free): Fix memory leak of SPF calculation. |
| |
| 2000-05-03 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_neighbor.c (ospf_db_summary_add): Use new_lsdb struct |
| instead linked-list. |
| (ospf_db_summary_count), (ospf_db_summary_isempty): |
| New function added. |
| |
| * ospf_lsa.c (ospf_rotuer_lsa): Re-arrange and divide functions. |
| |
| 2000-05-02 Gleb Natapov <gleb@nbase.co.il> |
| |
| * ospf_lsdb.c (new_lsdb_cleanup): Fix memory leak. When LSDB are |
| not needed any more, then free them. |
| |
| 2000-05-02 Toshiaki Takada <takada@zebra.org> |
| |
| * ospfd.c (timers_spf), (no_timers_spf): New defun added. |
| SPF calculation timers related stuff is rearranged. |
| |
| * ospf_spf.c (ospf_spf_calculate_timer_add): Function removed. |
| SPF timer is scheduled by SPF calculation delay and holdtime |
| configuration variable. |
| |
| * ospf_lsa.c (ospf_external_lsa_nexthop_get): Set AS-external-LSA's |
| forwarding address when nexthop learned by other protocols is |
| in the OSPF domain. |
| |
| * ospf_zebra.c (ospf_redistribute_source_metric_type), |
| (ospf_redistribute_source_type_metric): Re-arrange DEFUNs and |
| ALIASes. |
| |
| 2000-05-01 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_flood.c (ospf_ls_retransmit_count), |
| (ospf_ls_retransmit_isempty): New function added. |
| |
| (ospf_ls_retransmit_add), (ospf_ls_retransmit_delete), |
| (ospf_ls_retransmit_clear), (ospf_ls_retransmit_lookup), |
| (ospf_ls_retransmit_delete_all), (ospf_ls_retransmit_delete_nbr_all), |
| (ospf_ls_retransmit_add_nbr_all): Replace these functions to use |
| new_lsdb. |
| |
| 2000-04-29 Toshiaki Takada <takada@zebra.org> |
| |
| * ospfd.c (no_network_area): Add check Area-ID whether specified |
| Area-ID with prefix matches config. |
| |
| 2000-04-27 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_lsa.c (ospf_maxage_lsa_remover): Fix problem of |
| remaining withdrawn routes on zebra. |
| |
| 2000-04-25 Michael Rozhavsky <mike@nbase.co.il> |
| |
| * ospf_nsm.c (nsm_kill_nbr), (nsm_ll_down), (nsm_change_status), |
| (ospf_nsm_event): Fix network-LSA re-origination problem. |
| |
| 2000-04-24 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_nsm.c (ospf_db_desc_timer): Fix bug of segmentation fault |
| with DD retransmission. |
| |
| * ospf_nsm.c (nsm_kill_nbr): Fix bug of re-origination when |
| a neighbor disappears. |
| |
| 2000-04-23 Michael Rozhavsky <mike@nbase.co.il> |
| |
| * ospf_abr.c (ospf_abr_announce_network_to_area): Fix bug of |
| summary-LSAs reorigination. Correctly copy OSPF_LSA_APPROVED |
| flag to new LSA. when summary-LSA is reoriginatd. |
| |
| * ospf_flood.c (ospf_flood_through_area): Fix bug of flooding |
| procedure. Change the condition of interface selection. |
| |
| 2000-04-21 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_lsa.c (ospf_refresher_register_lsa): Fix bug of refresh never |
| occurs. |
| |
| * ospfd.c (show_ip_ospf_neighbor_id): New defun added. |
| `show ip ospf neighbor' related commands are re-arranged. |
| |
| 2000-04-20 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_dump.c (debug_ospf_zebra): New defun added. |
| Suppress zebra related debug information. |
| |
| 2000-04-19 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_zebra.c (ospf_distribute_list_update_timer), |
| (ospf_distribute_list_update), (ospf_filter_update): |
| New function added. Re-organize `distribute-list' router ospf |
| command. |
| |
| 2000-04-13 Michael Rozhavsky <mike@nbase.co.il> |
| |
| * ospf_packet.c (ospf_make_ls_upd): Add check for MAX_AGE. |
| |
| 2000-04-14 Michael Rozhavsky <mike@nbase.co.il> |
| |
| * ospf_packet.c (ospf_make_ls_upd): Increment LS age by configured |
| interface transmit_delay. |
| |
| 2000-04-14 Sira Panduranga Rao <pandu@euler.ece.iisc.ernet.in> |
| |
| * ospf_interface.c (ip_ospf_cost), (no_ip_ospf_cost): |
| Add to schedule router_lsa origination when the interface cost changes. |
| |
| 2000-04-12 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_lsa.c (ospf_refresher_register_lsa), |
| (ospf_refresher_unregister_lsa): Fix bug of core dumped. |
| |
| * ospfd.c (no_router_ospf): Fix bug of core dumped. |
| |
| 2000-03-29 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_nsm.c (nsm_oneway_received): Fix bug of MS flag unset. |
| |
| 2000-03-29 Michael Rozhavsky <mike@nbase.co.il> |
| |
| * ospf_lsa.c (ospf_network_lsa): |
| * ospf_nsm.c (ospf_nsm_event): Fix bug of Network-LSA originated |
| in stub network. |
| |
| 2000-03-28 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_nsm.c (nsm_bad_ls_req), (nsm_seq_number_mismatch), |
| (nsm_oneway_received): Fix bug of NSM state flapping between |
| ExStart and Exchange. |
| |
| 2000-03-28 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_packet.h (strcut ospf_header): Fix the size of ospf_header, |
| change u_int8_t to u_char. |
| |
| 2000-03-27 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_lsa.c (ospf_lsa_checksum): Take care of BIGENDIAN architecture. |
| |
| 2000-03-27 Toshiaki Takada <takada@zebra.org> |
| |
| * ospfd.c (ospf_interface_run): Make sure Address family matches. |
| |
| 2000-03-26 Love <lha@s3.kth.se> |
| |
| * ospf_packet.c (ospf_write): Chack result of sendto(). |
| |
| 2000-03-26 Sira Panduranga Rao <pandu@euler.ece.iisc.ernet.in> |
| |
| * ospf_nsm.c (nsm_oneway_received): Fix bug of 1-WayReceived in NSM. |
| |
| 2000-03-23 Libor Pechacek <farco@clnet.cz> |
| |
| * ospf_lsa.c (ospf_network_lsa) |
| * ospf_lsdb.c (new_lsdb_insert): Fix bug of accessing to |
| unallocated memory. |
| |
| 2000-03-23 Toshiaki Takada <takada@zebra.org> |
| |
| * ospfd.c (ospf_config_write): Fix bug of duplicate line for |
| `area A.B.C.D authentication'. |
| |
| 2000-03-22 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_debug.c (debug_ospf_lsa), (no_debug_ospf_lsa): Defun added. |
| Suppress all zlog related to LSAs with this config option. |
| |
| 2000-03-21 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_nsm.c (ospf_nsm_event): Add check for NSM_InactivityTimer. |
| |
| 2000-03-21 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_packet.c (ospf_ls_upd_timer), (ospf_ls_req): |
| Fix bug of memory leak about linklist. |
| |
| * ospf_flood.c (ospf_flood_through_area): Likewise. |
| |
| 2000-03-18 Sira Panduranga Rao <pandu@euler.ece.iisc.ernet.in> |
| |
| * ospf_flood.c (ospf_ls_retransmit_lookup): Add checksum comparison |
| to identify LSA uniquely. This fix routes lost. |
| |
| 2000-03-18 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_ase.c (ospf_find_asbr_route): Add sanity check with router |
| routing table. |
| |
| 2000-03-17 Alex Zinin <zinin@amt.ru> |
| |
| * ospf_spf.[ch]: Bug fix. |
| The 2nd stage of Dijkstra could consider one vertex |
| more than once if there is more than one link |
| between the routers, thus adding extra CPU overhead |
| and extra next-hops. |
| Fixed. |
| |
| 2000-03-15 Sira Panduranga Rao <pandu@euler.ece.iisc.ernet.in> |
| |
| * ospf_nsm.c (nsm_inactivity_timer): Changed to call nsm_kill_nbr(). |
| |
| 2000-03-14 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_route.c (ospf_route_copy_nexthops): Fix bug of memory leak of |
| ospf_path. Actually ignore merging ospf_route with completely same |
| paths. |
| |
| 2000-03-12 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_lsa.c (show_as_external_lsa_detail): fix bug of |
| external route tag byte order. |
| |
| 2000-03-11 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_lsdb.c (ospf_lsdb_insert): New function added. |
| |
| 2000-03-09 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_lsa.c (ospf_external_lsa_install), |
| (ospf_lsa_lookup), (show_ip_ospf_database_all), |
| (show_ip_ospf_database_self_originate): Use struct new_lsdb for |
| LSDB of AS-external-LSAs instead of ospf_lsdb. |
| |
| * ospf_lsa.c (ospf_lsa_unique_id): New function added. |
| Use for assigning Unique Link State ID instead of |
| ospf_get_free_id_for_prefix(). |
| |
| 2000-03-09 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_ase.c (ospf_ase_calculate_timer): Fix bug of segmentation |
| fault reported by George Bonser <george@siteROCK.com>. |
| |
| 2000-03-07 Libor Pechacek <farco@clnet.cz> |
| |
| * ospfd.c (ospf_interface_down): Fix bug of segmentation fault. |
| |
| 2000-03-06 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_route.c (ospf_route_cmp): Change meaning of return values. |
| |
| 2000-03-02 Alex Zinin <zinin@amt.ru> |
| * ospfd.h, ospf_ia.h |
| New Shortcut ABR code. Now area's flag can be configured |
| with Default, Enable, and Disable values. |
| More info will be in the new ver of I-D soon (see IETF web). |
| |
| 2000-02-25 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_lsa.c (ospf_lsa_header_set), (ospf_external_lsa_body_set), |
| (osfp_external_lsa_originate), (ospf_external_lsa_queue), |
| (ospf_external_lsa_originate_from_queue): New function added. |
| (ospf_external_lsa): Function removed. |
| |
| * ospf_zebra.c (ospf_zebra_read_ipv4): Originate AS-external-LSA |
| when listen a route from Zebra, instead creating external route. |
| |
| * ospf_asbr.c (ospf_asbr_route_add_flood_lsa), |
| (ospf_asbr_route_add_queue_lsa), |
| (ospf_asbr_route_install_lsa), (ospf_asbr_route_add): |
| Functions removed. |
| |
| * ospf_ase.c (process_ase_lsa): Function will not be used. |
| (ospf_ase_calculate), (ospf_ase_calculate_route_add), |
| (ospf_ase_calculate_new_route), (ospf_ase_caluculate_asbr_route): |
| process_ase_lsa () is separated to these functions. |
| |
| OSPF AS-external-LSA origination is whole re-organized. |
| |
| 2000-02-18 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_packet.c (ospf_ls_upd): Fix bug of OSPF LSA memory leak. |
| |
| * ospf_asbr.c (ospf_asbr_route_add_flood_lsa), |
| (ospf_asbr_route_add_queue_lsa): Fix bug of OSPF external route |
| memory leak. |
| |
| 2000-02-12 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_asbr.c (ospf_asbr_route_install_lsa): Re-calculate LSA |
| checksum after change Advertised Router field. |
| |
| 2000-02-09 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_asbr.c (ospf_external_route_lookup): Add new function. |
| |
| 2000-02-08 Toshiaki Takada <takada@zebra.org> |
| |
| * ospfd.c (ospf_router_id_get), (ospf_router_id_update), |
| (ospf_router_id_update_timer): Router ID decision algorithm is changed. |
| Router ID is chosen from all of eligible interface addresses even if |
| it is not enable to OSPF. |
| |
| 2000-02-08 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_asbr.c (ospf_asbr_route_add): Function divided to |
| ospf_asbr_route_add_flood_lsa, ospf_asbr_route_add_queue_lsa and |
| ospf_asbr_route_install_lsa. If Router-ID is not set, then LSA is |
| waited to install to LSDB. |
| `0.0.0.0 adv_router' AS-external-LSA origination bug was fixed. |
| |
| 2000-02-01 Sira Panduranga Rao <pandu@euler.ece.iisc.ernet.in> |
| |
| * ospf_flood.c (ospf_ls_retransmit_lookup): Compare LS seqnum |
| in the ACK before deleting. |
| |
| * ospf_packet.c (ospf_hello): Reset the flags after a shutdown |
| and no shutdown of the interface. |
| |
| 2000-01-31 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_packet.c (ospf_ls_req): Send multiple Link State Update |
| packets respond to a Link State Request packet. |
| |
| * ospfd.c (show_ip_ospf_neighbor_detail_sub): Show thread state. |
| |
| * ospf_interface.c (ospf_vl_new): Crash when backbone area |
| is not configured and set virtual-link to no-backbone area, |
| bug fixed. |
| |
| 2000-01-30 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_neighbor.h (struct ospf_neighbor): Add pointer to last send |
| LS Request LSA. |
| |
| * ospf_packet.c (ospf_ls_upd): Comment out LS request list |
| treatment. That should be done in OSPF flooding procedure. |
| |
| * ospf_flood.c (ospf_flood_through_area): Enclose |
| ospf_check_nbr_loding inside if-else close. |
| |
| 2000-01-31 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_packet.c (ospf_make_ls_upd): Fix bug of #LSAs counting. |
| |
| 2000-01-29 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_packet.c (ospf_make_md5_digest): Fix bug of md5 authentication. |
| |
| 2000-01-28 Toshiaki Takada <takada@zebra.org> |
| |
| * ospfd.c (show_ip_ospf): Show Number of ASE-LSAs. |
| |
| 2000-01-27 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_packet.c (ospf_make_db_desc): Don't use rm_list for |
| removing LSA from nbr->db_summary. |
| |
| 2000-01-27 Sira Panduranga Rao <pandu@euler.ece.iisc.ernet.in> |
| |
| * ospf_packet.c (ospf_ls_upd_send): Set AllSPFRouters to |
| destination when the link is point-to-point. |
| (ospf_ls_ack_send_delayed): Likewise. |
| |
| 2000-01-27 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_flood.c (ospf_ls_request_delete_all): Fix bug of next |
| pointer lookup after the node is freed. |
| |
| 2000-01-26 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_asbr.c (ospf_asbr_route_add): Instead of scanning all AS |
| external route, use ospf_top->external_self. |
| |
| 2000-01-27 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_lsa.c (ospf_forward_address_get): New function added. |
| |
| * ospf_asbr.c (ospf_asbr_check_lsas): Originate AS-external-LSA |
| only when it should be replaced. |
| |
| 2000-01-25 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_flood.c (ospf_ls_retransmit_clear): Delete list node. |
| |
| * ospf_lsa.c (ospf_lsa_free): Reduce logging message using |
| ospf_zlog value. |
| |
| * ospf_ism.c (ism_change_status): Fix bug of DR -> non DR status |
| change. Self originated LSA is freed but not deleted from lsdb. |
| |
| 2000-01-24 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_ism.c (ism_interface_down): Don't use router_id for |
| detecting self neighbor structure. Instead of that compare |
| pointer itself. |
| |
| * ospf_neighbor.c (ospf_nbr_free): Cancel all timer when neighbor |
| is deleted. |
| (ospf_nbr_free): Free last send packet. |
| |
| * ospf_neighbor.h (struct ospf_neighbor): Remove host strucutre. |
| Instead of that src is introduced. |
| |
| * ospf_nsm.h: Enclose macro defenition with do {} while (0). |
| |
| 2000-01-17 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospfd.c: Change part of passive interface implementation. For |
| passive interface just disabling sending/receiving Hello on the |
| interface. |
| |
| 2000-01-16 Kai Bankett <kai.bankett@vew-telnet.net> |
| |
| * ospf_interface.h (OSPF_IF_PASSIVE): Add passive flag. |
| * ospf_interface.c (ospf_if_lookup_by_name): Add new function. |
| * ospf_lsa.c (ospf_router_lsa): Skip passive interface. |
| * ospfd.c (passive_interface): New command passive-interface is |
| added. |
| (ospf_config_write): Print passive interface. |
| |
| 2000-01-15 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_interface.h (crypt_key): New struct added to store |
| multiple cryptographic autheitication keys. |
| (ospf_interface): struct changed. |
| |
| * ospf_interface.c: ospf_crypt_key_new, ospf_crypt_key_add, |
| ospf_crypt_key_lookup, ospf_crypt_key_delete: new functions added. |
| |
| * ospf_packet.c (ip_ospf_message_digest_key): Changed to store |
| multiple cryptographic authentication keys. |
| |
| 2000-01-14 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_interface.c: DEFUN (if_ospf_*) commands changed name to |
| ip_ospf_* (). |
| Old notation `ospf *' still remains backward compatibility. |
| |
| 1999-12-29 Alex Zinin <zinin@amt.ru> |
| * ospf_lsa.c: ospf_lsa_more_recent() bug fix |
| * ospf_nsm.c, ospf_packet.c: remove nbr data struct when |
| int goes down, also check DD flags correctly (bug fix) |
| |
| 1999-12-28 Alex Zinin <zinin@amt.ru> |
| * "redistribute <source> metric-type (1|2) metric <XXX>" added |
| |
| 1999-12-23 Alex Zinin <zinin@amt.ru> |
| * added RFC1583Compatibility flag |
| * added dynamic interface up/down functionality |
| |
| 1999-11-19 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_neighbor.h (struct ospf_neighbor): Add member state_change |
| for NSM state change statistics. |
| |
| 1999-11-19 Toshiaki Takada <takada@zebra.org> |
| |
| * ospfd.c (show_ip_ospf_neighbor_detail), |
| (show_ip_ospf_neighbor_int_detail): DEFUN Added. |
| |
| 1999-11-14 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_asbr.c (ospf_asbr_check_lsas): Add check of |
| lsa->refresh_list. |
| |
| 1999-11-11 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_ia.[ch] (OSPF_EXAMINE_SUMMARIES_ALL): Macro added. |
| This macro is expanded to ospf_examine_summaries () |
| for SUMMARY_LSA and SUMMARY_LSA_ASBR. |
| (OSPF_EXAMINE_TRANSIT_SUMMARIES_ALL): Macro added. |
| This macro is expanded to ospf_examine_transit_summaries () |
| for SUMMARY_LSA and SUMMARY_LSA_ASBR. |
| |
| 1999-11-11 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_lsa.[ch] (ospf_find_self_summary_lsa_by_prefix): Changed to |
| macro OSPF_SUMMARY_LSA_SELF_FIND_BY_PREFIX. |
| (ospf_find_self_summary_asbr_lsa_by_prefix): Changed to |
| macro OSPF_SUMMARY_ASBR_LSA_SELF_FIND_BY_PREFIX. |
| (ospf_find_self_external_lsa_by_prefix): Changed to |
| macro OSPF_EXTERNAL_LSA_SELF_FIND_BY_PREFIX. |
| |
| 1999-11-11 Toshiaki Takada <takada@zebra.org> |
| |
| * ospfd.c (ospf_abr_type): ospf_abr_type_cisco, ospf_abr_type_ibm, |
| ospf_abr_type_shortcut and ospf_abr_type_standard DEFUNs are |
| combined. |
| * ospfd.c (no_ospf_abr_type): no_ospf_abr_type_cisco, |
| no_ospf_abr_type_ibm and no_ospf_abr_type_shortcut DEFUNS are |
| combined. |
| |
| 1999-11-10 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_route.c (ospf_lookup_int_by_prefix): Move function to |
| ospf_interface.c and change name to ospf_if_lookup_by_prefix (). |
| |
| 1999-11-01 Alex Zinin <zinin@amt.ru> |
| * ospf_packet.c |
| some correction to LSU processing |
| |
| * ospf_lsa.c ospfd.h |
| randomize initial LSA refreshment interval |
| and limit the size of LSA-group to 10 |
| to let randomization work more effectively. |
| |
| 1999-10-31 Alex Zinin <zinin@amt.ru> |
| * ospf_interface.c |
| cancel t_network_lsa_self |
| when freeing int structure |
| |
| * ospf_abr.c ospf_asbr.c ospf_flood.c ospf_lsa.c |
| ospf_lsa.h ospf_lsdb.h ospfd.c ospfd.h |
| |
| Summary and ASE LSA refreshment functions |
| added---LSA refreshment is paced to 70 LSAs |
| per sec to avoid link overflow. Refreshment events |
| are further randomized within a 10 sec interval |
| to avoid syncing. |
| |
| Also the sigfault of memcmp() in ospf_lsa_is_different() |
| is fixed. |
| |
| 1999-10-30 Alex Zinin <zinin@amt.ru> |
| * ospf_nsm.c |
| Fix the bug where MAX_AGE LSAs |
| are included into the DB summary. |
| |
| * ospf_interface.c |
| allocate 2*MTU input buffer instead of just MTU |
| for the cases when the other router mistakenly |
| sends larger packets thus causing fragmentation, etc. |
| |
| * ospf_nsm.c |
| in nsm_reset_nbr() lists should be freed |
| not when they are empty. |
| |
| 1999-10-29 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_zebra.c (ospf_acl_hook): Move OSPF_IS_ASBR and OSPF_IS_ABR |
| check inside of if (ospf_top). |
| |
| 1999-10-29 Alex Zinin <zinin@amt.ru> |
| * ospf_lsa.c ospf_lsdb.c : |
| add assertion in lsa and lsa->data alloc functions, |
| as well as in lsdb_add for new->data |
| |
| * ospf_lsdb.c: free hash table correctly |
| |
| 1999-10-28 John Capo <jc@irbs.com> |
| |
| * ospf_packet.h (OSPF_PACKET_MAX): Correct MAX packet length |
| calculation |
| |
| 1999-10-27 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * OSPF-TRAP-MIB.txt: New file added. Edited version of RFC1850. |
| |
| * OSPF-MIB.txt: New file added. Edited version of RFC1850. |
| |
| 1999-10-27 Alex Zinin <zinin@amt.ru> |
| * ospfd, ospf_zebra, ospf_abr |
| "area import-list" command is added. |
| This command allows to filter the inter-area routes |
| injected into an area. Access list hook function |
| extended to invalidate area exp/imp lists. |
| |
| 1999-10-25 Yoshinobu Inoue <shin@nd.net.fujitsu.co.jp> |
| |
| * ospfd.c (ospf_interface_run): Enable to detect P2P network |
| on an OSPF interface. |
| |
| 1999-10-19 Jordan Mendelson <jordy@wserv.com> |
| |
| * ospf_lsdb.c (ospf_lsdb_add): Fix bug of crash |
| in ospf_ls_retransmit_lookup (). |
| |
| 1999-10-19 Vladimir B. Grebenschikov <vova@express.ru> |
| |
| * ospf_route.c: Workaround about installation of OSPF routes into |
| the zebra daemon. Add checking of existance routes. Free |
| ospf_top->old_table if it exists. |
| |
| 1999-10-15 Jordan Mendelson <jordy@wserv.com> |
| |
| * Add support for MD5 authentication. |
| |
| 1999-10-12 Alex Zinin <zinin@amt.ru> |
| * ospfd.c, ospfd.h, ospf_abr.c: |
| a new command "area export-list" was added, it allows |
| the admin. to control which intra-area routes are |
| announced to other areas by the ABR |
| |
| 1999-10-12 Alex Zinin <zinin@amt.ru> |
| * ospf_asbr.c (ospf_asbr_check_lsas): Fix bug of coredump |
| when "no redistribute" is used after a distribute list |
| denying some networks was used |
| |
| 1999-10-05 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_route.c (ospf_path_dup): New function added. |
| |
| 1999-10-05 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_interface.[ch]: Some of VL related funciton name changed. |
| |
| 1999-09-27 Alex Zinin <zinin@amt.ru> |
| |
| * ospf_zebra.c: Distribute-list functionality added |
| |
| 1999-09-27 Toshiaki Takada <takada@zebra.org> |
| |
| * ospfd.c (show_ip_ospf): Fix bug of segmentation fault when no ospf |
| instance exists. |
| |
| 1999-09-25 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospfd.c (ospf_interface_down): Fix bug of misusing nextnode() |
| instead of node->next. Reported by Hiroki Ishibashi |
| <ishibasi@dcd.abk.nec.co.jp>. |
| |
| * ospf_route.c (show_ip_ospf_route): Add check for ospf is enabled |
| or not. |
| |
| 1999-09-23 Alex Zinin <zinin@amt.ru> |
| |
| * stub area support added |
| |
| 1999-09-23 Alex Zinin <zinin@amt.ru> |
| |
| * fwd_addr in ASE-LSAs is now set correctly |
| * ASE routing changed to check the fwd_addr |
| and skip the route if the addr points to one |
| of our interfaces to avoid loops. |
| |
| 1999-09-22 Alex Zinin <zinin@amt.ru> |
| |
| * ospf_interface: |
| ospf_vls_in_area() added, it returns |
| the number of VLs configured through the area |
| |
| * ospf_interface.c ospf_lsa.c ospf_lsdb.c ospfd.c |
| honor correct mem alloc |
| |
| 1999-09-22 Alex Zinin <zinin@amt.ru> |
| |
| * memory.[ch]: |
| Some OSPF mem types added, |
| plus more info in "show mem" |
| |
| 1999-09-21 Alex Zinin <zinin@amt.ru> |
| |
| * ospfd.c: |
| "area range substitute" added. |
| It can be used on NAT-enabled (IP-masquarade) |
| routers to announce private networks |
| from an area as public ones into the outside |
| world (not in the RFC, btw :) |
| |
| 1999-09-21 Alex Zinin <zinin@amt.ru> |
| |
| * ospfd.c: |
| "area range suppress" added. |
| This command allows to instruct the router |
| to be silent about specific ranges, i.e., |
| it is a method of route filtering on area |
| borders |
| |
| 1999-09-21 Alex Zinin <zinin@amt.ru> |
| |
| * ospfd.c VLs removed when "no network area" executed |
| |
| 1999-09-20 Alex Zinin <zinin@amt.ru> |
| |
| * ospf_ase.c bug fix for not-zero fwd_addr |
| and directly connected routes. |
| |
| 1999-09-20 Yon Uriarte <yon@plannet.de> |
| |
| * ospf_packet.c (ospf_make_ls_req): Introduce delta value for |
| checking the length of OSPF packet exceeds MTU or not. |
| |
| * ospf_lsa.c (ospf_lsa_different): Apply ntohs for checking |
| l1->data->length. |
| |
| 1999-09-18 Alex Zinin <zinin@amt.ru> |
| |
| * ospf_lsa.c bug fix for ospf_network_lsa() to |
| include itself into the RID list |
| |
| 1999-09-10 Alex Zinin <zinin@amt.ru> |
| |
| * Alternative ABR behaviors IBM/Cisco/Shortcut |
| implemented |
| |
| 1999-09-10 Alex Zinin <zinin@amt.ru> |
| |
| * router and network-LSA origination |
| changed to honor MinLSInterval |
| |
| 1999-09-08 Alex Zinin <zinin@amt.ru> |
| |
| * modified ABR behavior to honor VLs and transit |
| areas |
| |
| 1999-09-07 Alex Zinin <zinin@amt.ru> |
| |
| * completed VL functionality |
| |
| 1999-09-06 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_asbr.c: New file. |
| ospf_asbr.h: New file. |
| |
| * ospf_zebra.c (ospf_redistribute_connected): Add redistribute |
| related stuff. |
| |
| 1999-09-05 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospfd.h (OSPF_FLAG_VIRTUAL_LINK): Change OSPF_FLAG_VEND to |
| OSPF_FLAG_VIRTUAL_LINK for comprehensiveness. |
| |
| 1999-09-03 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_spf.c (ospf_spf_register): Change name from |
| ospf_spf_route_add() to ospf_spf_register(). |
| Include "ospfd/ospf_abr.h" for ospf_abr_task() prototype. |
| |
| 1999-09-02 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_lsa.c (ospf_external_lsa_install): Change to update |
| lsa->data rather than install new one, when same id lsa is already |
| installed. |
| |
| 1999-09-01 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_lsa.c (ospf_router_lsa_install): Return lsa value. |
| (ospf_network_lsa_install): Likewise. |
| (ospf_summary_lsa_install): Likewise. |
| (ospf_summary_asbr_lsa_install): Likewise. |
| (ospf_external_lsa_install): Likewise. |
| |
| * ospf_spf.c (ospf_spf_calculate): Comment out debug function |
| ospf_rtrs_print(). |
| |
| 1999-08-31 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_spf.c (ospf_rtrs_free): Add ospf_spf_calculate() for |
| freeing rtrs. |
| |
| 1999-08-31 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_lsa.c (show_ip_ospf_database_summary), |
| (show_ip_ospf_database_summary_asbr), |
| (show_ip_ospf_database_external): New function added. |
| `show ip ospf database summary', |
| `show ip ospf database asbr-summary' |
| `show ip ospf database external' command can be used. |
| |
| * ospf_lsa.c (ospf_lsa_count_table): New function added. |
| (show_ip_ospf_database_all): show nothing if a type of LSA |
| does not exist. |
| |
| 1999-08-31 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_lsa.c (ospf_maxage_lsa_remover): Preserve next pointer when |
| the node is deleted. |
| |
| 1999-08-31 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_flood.c (ospf_ls_retransmit_lookup): change to return |
| struct ospf_lsa *. |
| (ospf_ls_request_new), (ospf_ls_request_free), |
| (ospf_ls_request_add), (ospf_ls_request_delete), |
| (ospf_ls_request_delete_all), (ospf_ls_request_lookup): |
| New function added. |
| |
| * ospf_packet.c (ospf_ls_upd_send_lsa): New function added. |
| |
| * ospf_lsa.h (LS_AGE): Slightly change macro definition. |
| |
| * ospf_lsa.c (ospf_lsa_more_recent), (ospf_lsa_diffrent): |
| Use LS_AGE macro. |
| |
| 1999-08-30 Alex Zinin <zinin@amt.ru> |
| |
| * ospfd.c |
| fix a bug with area range config write |
| added "show ip ospf" command, it will be enhanced later on |
| |
| 1999-08-30 Alex Zinin <zinin@amt.ru> |
| |
| * ospf_lsa.c |
| updated ospf_router_lsa() to honor flags (B-bit) |
| |
| 1999-08-30 Alex Zinin <zinin@amt.ru> |
| |
| * ospf_abr.c |
| wrote major functions implementing ABR activity |
| |
| 1999-08-30 Alex Zinin <zinin@amt.ru> |
| |
| * ospf_ia.c ospf_route.c ospf_route.h |
| fixed the bug with ospf_route.origin field. |
| Now it holds pointer to lsa_header |
| |
| 1999-08-30 Alex Zinin <zinin@amt.ru> |
| |
| * ospf_flood.c ospf_flood.h: |
| transformed ospf_flood_if_select into ospf_flood_through_area() |
| added new ospf_flood_if_select() and ospf_flood_through_as() |
| |
| 1999-08-30 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_flood.[ch]: New file added. |
| |
| * ospf_packet.c (ospf_lsa_flooding), |
| (ospf_lsa_flooding_select_if): functions move to ospf_flood.c |
| |
| * ospf_neighbor.c (ospf_put_lsa_on_retransm_list), |
| (ospf_remove_lsa_from_retransm_list), |
| (ospf_nbr_remove_all_lsas_from_retransm_list), |
| (ospf_lsa_remove_from_ls_retransmit): |
| (ospf_lsa_retransmit): functions move to |
| ospf_flood.c, and change function's name: |
| |
| ospf_put_lsa_on_retransm_list () |
| -> ospf_ls_retransmit_add () |
| ospf_remove_lsa_from_retransm_list () |
| -> ospf_ls_retransmit_delete () |
| ospf_nbr_remove_all_lsas_from_retransm_list () |
| -> ospf_ls_retransmit_clear () |
| ospf_lsa_remove_from_ls_retransmit () |
| -> ospf_ls_retransmit_delete_nbr_all () |
| ospf_lsa_retransmit () |
| -> ospf_ls_retransmit_add_nbr_all () |
| |
| * ospf_lsa.c (ospf_lsa_lookup_from_list): function move to |
| ospf_flood.c, and change name to ospf_ls_retransmit_lookup (). |
| |
| 1999-08-30 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_neighbor.c (ospf_nbr_lookup_by_addr): Use |
| route_node_lookup() instead of route_node_get(). |
| |
| * ospf_packet.c (ospf_ls_upd): Temporary comment out (6) check. |
| |
| 1999-08-30 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_route.c (ospf_lookup_int_by_prefix): Add check of |
| oi->address. |
| |
| 1999-08-29 Alex Zinin <zinin@amt.ru> |
| * ospf_lsa.c |
| MaxAge LSA deletion functions added. |
| |
| 1999-08-29 Alex Zinin <zinin@amt.ru> |
| * ospf_neighbor.c |
| ospf_nbr_lookup_by_addr(): added route_unlock_node() |
| when function returns NULL if (rn->info == NULL) |
| |
| 1999-08-29 Alex Zinin <zinin@amt.ru> |
| * ospfd.c |
| added a hack for area range deletion |
| |
| 1999-08-29 Alex Zinin <zinin@amt.ru> |
| * ospf_lsa.h |
| included lsdb field into struct ospf_lsa, to find |
| LSDB easier when removing MaxAge LSAs. |
| |
| 1999-08-29 Alex Zinin <zinin@amt.ru> |
| * ospf_lsa.c ospf_neighbor.c ospf_nsm.c |
| ospf_packet.c changed to honor new retransmit list |
| management functions |
| |
| 1999-08-29 Alex Zinin <zinin@amt.ru> |
| * ospf_neighbor.c , .h added new retransmit list functions. |
| |
| 1999-08-29 Alex Zinin <zinin@amt.ru> |
| * Makefile.in |
| added ospf_ase, ospf_abr, ospf_ia |
| |
| 1999-08-29 Alex Zinin <zinin@amt.ru> |
| * ospf_spf.c: |
| - changed ospf_next_hop_calculation() to include interface |
| and nexthop addr for directly connected routers---more informative |
| and solves problem with route installation into the kernel |
| - changed ospf_nexthop_out_if_addr() to support routers, not only |
| transit networks |
| - added ospf_process_stubs(); |
| |
| 1999-08-29 Alex Zinin <zinin@amt.ru> |
| * ospf_lsa.c: |
| - changed ospf_router_lsa() to provide correct links |
| for p-t-p interfaces; |
| - changed ospf_summary_lsa_install() to support table |
| of self-originated summary-LSAs; |
| - added ospf_summary_asbr_lsa_install() and ospf_external_lsa_install() |
| - changed ospf_lsa_install() accordingly |
| - changed show_ip_ospf_database_router_links() to support p-t-p |
| |
| 1999-08-29 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_packet.c (ospf_make_db_desc): Only master can clear more |
| flag. |
| |
| 1999-08-29 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_packet.c (ospf_read): Add check of IP src address. |
| |
| 1999-08-28 Alex Zinin <zinin@amt.ru> |
| * ospf_neighbor.h |
| added ospf_nbr_lookup_by_routerid() |
| |
| 1999-08-28 Alex Zinin <zinin@amt.ru> |
| * ospfd.h |
| added ABR/ASBR flag definitions and fields; |
| added iflist field to area structure; |
| summary_lsa_self and summary_lsa_asbr_self are changed |
| to be route tables; |
| added ranges field---configured area ranges; |
| A separate Routers RT added; |
| area range config commands and config write added |
| |
| |
| 1999-08-28 Alex Zinin <zinin@amt.ru> |
| * ospf_route.c : |
| ospf_route_free()--added code to free the list of paths; |
| The following functions added: |
| ospf_intra_add_router(); |
| ospf_intra_add_transit(); |
| ospf_intra_add_stub(); |
| the last function uses new ospf_int_lookup_by_prefix(); |
| show_ip_ospf_route_cmd()--changed to support new RT structure; |
| added ospf_cmp_routes()--general route comparision function; |
| added ospf_route_copy_nexthops() and ospf_route_copy_nexthops_from_vertex() |
| they are used in ASE and IA routing; |
| added ospf_subst_route() and ospf_add_route(); |
| |
| 1999-08-28 Alex Zinin <zinin@amt.ru> |
| * ospf_route.h : |
| changed struct ospf_path to include output interface, |
| changed struct ospf_route to support IA and ASE routing. |
| added prototypes of the function used in IA and ASE modules. |
| |
| 1999-08-28 Alex Zinin <zinin@amt.ru> |
| * ospf_lsa.h ospf_lsa.c : |
| added ospf_my_lsa(), an interface independent version of |
| ospf_lsa_is_self_originated(), it will be used in ASE and IA-routing. |
| |
| 1999-08-27 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_interface.c (interface_config_write): Add check for |
| oi->nbr_self. |
| |
| 1999-08-25 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_lsa.c (ospf_lsa_dup): New function added. |
| |
| * ospf_packet.c (ospf_write), (ospf_read): Print send/recv |
| interface in debug message. |
| |
| 1999-08-25 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_packet.c (ospf_ls_ack_send): The name is changed from |
| `ospf_ls_ack_send'. |
| (ospf_ls_ack_send_delayed) (ospf_ls_ack_timer): New function added. |
| Delayed Link State Acknowledgment is scheduled by timer. |
| |
| 1999-08-25 Alex Zinin <zinin@amt.ru> |
| |
| * ospf_lsa.c (ospf_router_lsa): Incorrectly included link to |
| a stub network instead of link to a transit network into |
| originated router-LSA, bug fixed. |
| |
| 1999-08-24 Toshiaki Takada <takada@zebra.org> |
| |
| * ospfd.c (ospf_update_router_id): New function added. |
| |
| * ospf_network.c (ospf_write): Create new socket per transmission. |
| And select outgoing interface whether dst is unicast or multicast. |
| |
| * ospf_packet.c: LSA flooding will work. |
| |
| 1999-08-24 VOP <vop@unity.net> |
| |
| * ospf_route.c: Include "sockunion.h" |
| |
| 1999-08-24 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_network.c (ospf_serv_sock_init): Enclose |
| IPTOS_PREC_INTERNETCONTROL setting with #ifdef for OS which does |
| not have the definition. |
| |
| 1999-08-23 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_packet.c: Fix bug of DD processing. |
| |
| 1999-08-18 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_lsa.c (show_ip_ospf_database): Show actual `LS age'. |
| |
| 1999-08-17 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_lsa.h (OSPF_MAX_LSA): The value of OSPF_MAX_LSA is |
| corrected. The bug of `mes_lookup' is fixed. |
| This had been reported by Poul-Henning Kamp <phk@freebsd.org>. |
| |
| * ospf_lsa.c (ospf_router_lsa_install): The name is changed from |
| `ospf_add_router_lsa'. |
| (ospf_network_lsa_install): The name is changed from |
| `ospf_add_network_lsa'. |
| |
| * ospf_interface.h (ospf_interface): Add member `nbr_self'. |
| |
| * ospf_interface.c (ospf_if_is_enable): New function added. |
| |
| 1999-08-16 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_lsa.h (struct lsa_header): The name is changed from |
| `struct ospf_lsa'. |
| (struct ospf_lsa): New struct added to control each LSA's aging |
| and timers. |
| |
| * ospf_lsa.c (ospf_lsa_data_free): The name is change from |
| `ospf_lsa_free'. |
| (ospf_lsa_data_new), (ospf_lsa_new), (ospf_lsa_free), |
| (ospf_lsa_different), (ospf_lsa_install): New function added. |
| |
| * ospf_packet.c (ospf_ls_upd_list_lsa): New function added. |
| |
| 1999-08-12 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_nsm.c (nsm_reset_nbr): New function added. |
| KillNbr and LLDown neighbor event call this function. |
| |
| 1999-08-10 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_packet.c (ospf_ls_retransmit) |
| (ospf_ls_upd_timer): New function added. |
| Set retransmission timer for Link State Update. |
| |
| 1999-07-29 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_ism.c (ospf_dr_election): Fix bug of DR election. |
| |
| 1999-07-28 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_network.c (ospf_serv_sock_init): Set IP precedence field |
| with IPTOS_PREC_INTERNET_CONTROL. |
| |
| * ospf_nsm.c (nsm_change_status): Schedule NeighborChange event |
| if NSM status change. |
| |
| * ospf_packet.c (ospf_make_hello): Never include a neighbor in |
| Hello packet, when the neighbor goes down. |
| |
| 1999-07-26 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * Makefile.am (noinst_HEADERS): Add ospf_route.h. |
| |
| * ospf_route.c (show_ip_ospf_route): Add `show ip ospf route' |
| command. |
| |
| 1999-07-25 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_lsa.c (ospf_router_lsa): Fix bug of LS sequence number |
| assignement. |
| |
| 1999-07-25 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_route.c (ospf_route_table_free): New function added. |
| |
| * ospf_spf.c (ospf_spf_next): Free vertex w when cw's and w's |
| distance is same. |
| |
| * ospfd.h (struct ospf): Add old_table. |
| |
| * ospf_main.c (sighup): Call of log_rotate () removed. |
| |
| * ospf_lsa.c (ospf_lsa_is_self_originated): Fix bug of checking |
| area->lsa as self LSA. This should be area->lsa_self. |
| |
| 1999-07-24 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_zebra.c (ospf_zebra_add): ospf_zebra_add |
| (),ospf_zebra_delete () added. |
| |
| * ospf_spf.c (ospf_spf_calculate): Call ospf_intra_route_add (). |
| |
| 1999-07-24 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_lsa.c: Change LS sequence number treatment. |
| (ospf_lsa_is_self_originated): New function added. |
| (show_ip_ospf_database_self_originated): New DEFUN added. |
| |
| 1999-07-23 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_interface.c (ospf_if_lookup_by_addr): Add loopback check. |
| |
| 1999-07-22 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_spf.c (ospf_nexthop_new), (ospf_nexthop_free), |
| (ospf_nexthop_dup): function added. |
| (ospf_nexthop_calculation): function changed. |
| |
| * ospf_interface.c (ospf_if_lookup_by_addr): function added. |
| |
| 1999-07-21 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_spf.c (ospf_spf_closest_vertex): function removed. |
| |
| 1999-07-21 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_spf.c (ospf_spf_next): Apply ntohs for fetching metric. |
| |
| 1999-07-21 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_neighbor.c (ospf_nbr_lookup_by_router_id): fundtion removed. |
| |
| * ospf_lsa.c (show_ip_ospf_database_router): describe each |
| connected link. |
| |
| 1999-07-21 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_spf.c (ospf_spf_next): V is router LSA or network LSA so |
| change behavior according to LSA type. |
| (ospf_lsa_has_link): Link check function is added. |
| |
| 1999-07-20 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_spf.c (ospf_spf_calculate_schedule): Add new function for |
| SPF calcultion schedule addtition. |
| (ospf_spf_calculate_timer_add): Rough 30 sec interval SPF calc |
| timer is added. |
| (ospf_spf_next_router): Delete ospf_spf_next_network (). |
| |
| * ospf_lsa.c (show_ip_ospf_database_all): Network-LSA display |
| header typo correction. Display of router LSA's #link added. |
| |
| 1999-07-19 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_packet.c (ospf_check_network_mask): Added new function for |
| receiving Raw IP packet on an appropriate interface. |
| |
| 1999-07-16 Toshiaki Takada <takada@zebra.org> |
| |
| * ospfd.c (ospf_router_id): new DEFUN added. |
| |
| 1999-07-15 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_spf.c (ospf_spf_init), (ospf_spf_free), |
| (ospf_spf_has_vertex), (ospf_vertex_lookup), |
| (ospf_spf_next_router), (ospf_spf_next_network), |
| (ospf_spf_closest_vertex), (ospf_spf_calculate): |
| function added. |
| |
| 1999-07-13 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_ism.c: fix bug of DR Election. |
| |
| * ospf_nsm.c: fix bug of adjacency forming. |
| |
| 1999-07-05 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospfd.c (ospf_init): Change to use install_default. |
| |
| 1999-07-01 Rick Payne <rickp@rossfell.co.uk> |
| |
| * ospf_zebra.c (zebra_init): Install standard commands to |
| ZEBRA_NODE. |
| |
| 1999-06-30 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_dump.c: Whole debug command is improved. |
| (ISM|NSM) (events|status|timers) debug option added. |
| (show_debugging_ospf): new DEFUN added. |
| |
| 1999-06-30 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_lsa.c (ospf_lsa_lookup_from_list): Change !IPV4_ADDR_CMP to |
| IPV4_ADDR_SAME. |
| |
| 1999-06-29 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_dump.c (ospf_summary_lsa_dump): Add summary-LSA dump routine. |
| (ospf_as_external_lsa_dump): Add AS-external-LSA dump routine. |
| |
| * ospf_nsm.c (nsm_twoway_received): fix condtion of adjacnet. |
| |
| * ospf_ism.c (ospf_dr_election): fix DR Election. |
| |
| * ospf_dump.c (ospf_nbr_state_message): fix `show ip ospf neighbor' |
| command's state. |
| |
| 1999-06-29 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_dump.c (ospf_router_lsa_dump): Add router-LSA dump routine. |
| |
| 1999-06-28 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_lsa.c (show_ip_ospf_database_network): fix bug of |
| `show ip ospf database network' command output. |
| |
| * ospf_nsm.c (nsm_inactivity_timer): Clear list of Link State |
| Retransmission, Database Summary and Link State Request. |
| |
| * ospf_packet.c (ospf_ls_req_timer): New function added. |
| Set Link State Request retransmission timer. |
| |
| 1999-06-27 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_main.c (main): Change default output from ZLOG_SYSLOG to |
| ZLOG_STDOUT. |
| |
| * ospfd.c (ospf_init): Register show_ip_ospf_interface_cmd and |
| show_ip_ospf_neighbor_cmd to VIEW_NODE. |
| |
| * ospf_lsa.c (ospf_lsa_init): Register show_ip_ospf_database_cmd |
| and show_ip_ospf_database_type_cmd to VIEW_NODE. |
| |
| 1999-06-25 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_packet.c: fix bug of DD making. |
| fix bug of LS-Update reading. |
| |
| 1999-06-23 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_packet.c: All type of packets are changed to use |
| fifo queue structure. |
| (ospf_fill_header) function added. |
| |
| 1999-06-22 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_packet.c (ospf_packet_new): New function added to handle |
| sending ospf packet by fifo queue structure. |
| (ospf_packet_free), (ospf_fifo_new), (ospf_fifo_push), |
| (ospf_fifo_pop), (ospf_fifo_head), (ospf_fifo_flush), |
| (ospf_fifo_free): Likewise. |
| |
| 1999-06-21 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_nsm.c (ospf_db_desc_timer): function added. |
| (nsm_timer_set) function added. |
| * ospf_dump.c (ospf_option_dump): function added. |
| * ospf_packet.c (ospf_ls_req) (ospf_make_ls_req): function added. |
| |
| 1999-06-20 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_lsa.c (ospf_lsa_more_recent): function added. |
| * ospf_neighbor.h (struct ospf_neighbor): Change member ms_flag |
| to dd_flags. |
| |
| 1999-06-19 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_lsa.c: DEFUN (show_ip_ospf_database) Added. |
| * ospf_interface.c (if_ospf_cost), (if_ospf_dead_interval), |
| (if_ospf_hello_interval), (if_ospf_priority), |
| (if_ospf_retransmit_interval), (if_ospf_transmit_delay) |
| argument changed from NUMBER to <range>. |
| DEFUN (if_ospf_network_broadcast), |
| DEFUN (if_ospf_network_non_broadcast), |
| DEFUN (if_ospf_network_point_to_multipoint), |
| DEFUN (if_ospf_network_point_to_point) functions are combined to |
| DEFUN (if_ospf_network). |
| |
| 1999-06-18 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_lsa.c: ospf_add_router_lsa (), ospf_add_network_lsa (), |
| ospf_lsa_lookup (), ospf_lsa_count () Added. |
| |
| 1999-06-15 Toshiaki Takada <takada@zebra.org> |
| |
| * DEFUN (ospf_debug_ism), DEFUN (ospf_debug_nsm), |
| DEFUN (no_ospf_debug_ism), DEFUN (no_ospf_debug_nsm) Added. |
| `debug ospf ism' command shows debug message. |
| `debuf ospf nsm' command shows debug message. |
| |
| 1999-06-14 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_lsa.c: ospf_network_lsa () Added. |
| ospf_lsa_checksum () Added. |
| * DEFUN (ospf_debug_packet), DEFUN (no_ospf_debug_packet) Added. |
| `debug ospf packet' command shows debug message. |
| |
| 1999-06-13 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_packet.h: Remove struct ospf_ls_req {}, ospf_ls_upd {}, |
| ospf_ls_ack {}. |
| |
| 1999-06-11 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_dump.c: fix IP packet length treatment. |
| |
| 1999-06-10 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_ism.h: Add OSPF_ISM_EVENT_EXECUTE() Macro Added. |
| * ospf_nsm.h: Add OSPF_NSM_EVENT_EXECUTE() Macro Added. |
| |
| * ospf_packet.c: ospf_db_desc (), ospf_db_desc_send () Added. |
| ospf_make_hello (), ospf_make_db_desc () Added. |
| ospf_db_desc_proc () Added.n |
| |
| * Database Description packet can be processed. |
| |
| 1999-06-08 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_lsa.c: New file. |
| |
| 1999-06-07 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_neighbor.c: ospf_fully_adjacent_count () Added. |
| |
| 1999-06-07 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_spf.[ch]: New file. |
| |
| 1999-05-30 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_zebra.c: Changed to use lib/zclient.c routines. |
| |
| * ospf_zebra.h (zebra_start): Remove struct zebra. |
| |
| 1999-05-29 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospfd.c (ospf_config_write): Add cast (unsigned long int) to |
| ntohl for sprintf warning. |
| |
| 1999-05-19 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_ism.c (ospf_dr_election): Join AllDRouters Multicast group |
| if interface state changes to DR or BDR. |
| |
| 1999-05-14 Stephen R. van den Berg <srb@cuci.nl> |
| |
| * ospf_main.c (signal_init): SIGTERM call sigint. |
| (sigint): Logging more better message. |
| |
| 1999-05-12 Toshiaki Takada <takada@zebra.org> |
| |
| * ospfd.c: Fix bug of `no router ospf' statement, it will work. |
| |
| 1999-05-11 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_neighbor.c: ospf_nbr_free () Added. |
| |
| 1999-05-10 Toshiaki Takada <takada@zebra.org> |
| |
| * ospfd.h: struct ospf_area { }, struct ospf_network { } Changed. |
| * Fix bug of `no network' statement, it will work. |
| |
| 1999-05-07 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_interface.c, ospf_zebra.c: Fix bug of last interface is not |
| updated by ospf_if_update (). |
| |
| 1999-04-30 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * Makefile.am (noinst_HEADERS): Add ospf_lsa.h for distribution. |
| |
| 1999-04-25 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_interface.c: DEFUN (no_if_ospf_cost), |
| DEFUN (no_if_ospf_dead_interval), |
| DEFUN (no_if_ospf_hello_interval), |
| DEFUN (no_if_ospf_priority), |
| DEFUN (no_if_ospf_retransmit_interval), |
| DEFUN (no_if_ospf_transmit_delay) Added. |
| |
| interface_config_write () suppress showing interface |
| default values. |
| |
| 1999-04-25 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_dump.c (ospf_timer_dump): If thread is NULL return "inactive". |
| |
| * ospfd.c (ospf_if_update): Fix bug of using ospf_area { } instead |
| of ospf_network { }. So `router ospf' statement in ospfd.conf |
| works again. |
| (ospf_if_update): Call ospf_get_router_id for updating router ID. |
| |
| 1999-04-25 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_interface.c: DEFUN (if_ospf_network) deleted. |
| DEFUN (if_ospf_network_broadcast), |
| DEFUN (if_ospf_network_non_broadcast), |
| DEFUN (if_ospf_network_point_to_multipoint), |
| DEFUN (if_ospf_network_point_to_point), |
| DEFUN (no_if_ospf_network) Added. |
| |
| 1999-04-23 Toshiaki Takada <takada@zebra.org> |
| |
| * ospfd.h: struct area { } changed to struct ospf_network { }. |
| Add struct ospf_area { }. |
| * ospfd.c: Add ospf_area_lookup_by_area_id (), ospf_network_new (), |
| and ospf_network_free (). |
| DEFUN (area_authentication), DEFUN (no_area_authentication) Added. |
| |
| 1999-04-22 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_lsa.h: New file. |
| * ospf_packet.h: LSA related struct definition are moved to |
| ospf_lsa.h. |
| * ospf_packet.c: ospf_verify_header () Added. |
| |
| 1999-04-21 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_ism.c: ospf_elect_dr () and related function is changed. |
| DR Election bug fixed. |
| * ospf_dump.c: ospf_nbr_state_message (), ospf_timer_dump () Added. |
| * ospfd.c: DEFUN (show_ip_ospf_neighbor) Added. |
| |
| 1999-04-19 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_main.c (main): access_list_init () is added for vty |
| connection filtering. |
| |
| 1999-04-16 Toshiaki Takada <takada@zebra.org> |
| |
| * ospfd.c: DEFUN (show_ip_ospf_interface) Added. |
| * ospf_neighbor.c: ospf_nbr_count () Added. |
| |
| 1999-04-15 Toshiaki Takada <takada@zebra.org> |
| |
| * ospfd.h: struct ospf { } Changed. |
| * ospfd.c: ospf_lookup_by_process_id () Deleted. |
| * ospf_ism.c: ospf_wait_timer () Added. WaitTimer will work. |
| |
| 1999-04-14 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_ism.c: ospf_elect_dr () Added. |
| * ospf_network.c: ospf_if_ipmulticast () Added. |
| |
| 1999-04-11 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_interface.c: interface_config_write (), |
| DEFUN (if_ip_ospf_cost), |
| DEFUN (if_ip_ospf_dead_interval), |
| DEFUN (if_ip_ospf_hello_interval), |
| DEFUN (if_ip_ospf_priority), |
| DEFUN (if_ip_ospf_retransmit_interval) and |
| DEFUN (if_ip_ospf_transmit_delay) Added. |
| |
| 1999-04-08 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_dump.c: ospf_packet_db_desc_dump () Added. |
| * ospf_neighbor.c: ospf_nbr_bidirectional () Added. |
| * ospf_nsm.c: nsm_twoway_received () Added. |
| |
| 1999-04-02 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_neighbor.c: New file. |
| * ospf_neighbor.h: New file. |
| * ospf_nsm.c: New file. |
| * ospf_nsm.h: New file. |
| * ospf_packet.c: Add ospf_make_header (), ospf_hello () and |
| ospf_hello_send (). Now OSPFd can receive Hello and send Hello. |
| |
| 1999-03-27 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_packet.c: Add ospf_recv_packet (). Now OSPF Hello can receive. |
| |
| 1999-03-19 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_packet.c: New file. |
| * ospf_packet.h: New file. |
| * ospf_network.c: New file. |
| * ospf_network.h: New file. |
| * ospfd.h: move OSPF message structure has moved to ospf_packet.h. |
| |
| 1999-03-17 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * ospf_zebra.c (ospf_zebra_get_interface): Fix for IPv6 interface |
| address. |
| |
| * Makefile.am (install-sysconfDATA): Overwrite install-sysconfDATA |
| for install ospfd.conf.sample as owner read only file. |
| |
| * ospf_main.c (usage): Change to use ZEBRA_BUG_ADDRESS. |
| |
| 1999-03-15 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_ism.c: New file. |
| * ospf_ism.h: New file. |
| * ospf_dump.c: New file. |
| * ospf_dump.h: New file. |
| |
| * ospfd.h: Add (struct ospf), (struct config_network), |
| (struct message) structure. |
| |
| * ospf_interface.c: Add ospf_if_match_network (). |
| * ospf_interface.h (struct ospf_interface): Change struct members. |
| |
| * ospfd.c: ospf_lookup_by_process_id (), ospf_network_new (), |
| DEFUN (network_area): Added. |
| |
| * ospfd.conf.sample: Change sample configuration. |
| |
| 1999-03-05 Toshiaki Takada <takada@zebra.org> |
| |
| * ospf_interface.c: New file. |
| * ospf_interface.h: New file. |
| * ospf_zebra.h: New file. |
| * ospf_zebra.c: Add interface function for zebra daemon. |
| * ospfd.c: New file. |
| |
| 1999-02-23 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * Move IPv6 codes and files to ospf6d directory. |
| |
| 1999-02-18 Peter Galbavy <Peter.Galbavy@knowledge.com> |
| |
| * syslog support added |
| |
| 1998-12-22 Toshiaki Takada <takada@zebra.org> |
| |
| * ospfd.h: New file. |
| * ospf_lsa.h: New file. |
| |
| 1998-12-15 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * Makefile.am: New file. |
| * ospf_main.c: New file. |
| |