| 2004-10-20 Hasso Tepper <hasso at quagga.net> |
| |
| * vtysh.c: Don't popen pager if command is "exit". Fixes "vtysh screws |
| up my terminal if I exit" issue. |
| |
| 2004-10-13 Hasso Tepper <hasso at quagga.net> |
| |
| * extract.pl.in: All daemons can use both IPv6 and IPv4 access lists |
| to limit access to vty. |
| |
| 2004-10-11 Paul Jakma <paul@dishone.st> |
| |
| * vtysh.c: (vtysh_client_execute) fix the sync fix. The 4th and |
| final sync byte is not ASCII NULL, it's actually a status integer, |
| and only ASCII NULL if CMD_SUCCESS is returned by daemon. |
| Fix pointed out by Hasso. |
| |
| 2004-10-11 Hasso Tepper <hasso at quagga.net> |
| |
| * vtysh.c, vtysh_user.c: Make more strings const. |
| |
| 2004-10-07 Hasso Tepper <hasso at quagga.net> |
| |
| * vtysh.c, vtysh.h, vtysh_config.c, vtysh_main.c: Fix compiler |
| warnings: make strings const, signed -> unsigned, remove unused |
| variables. |
| * vtysh_config.c: Fix crash introduced with previous patch. |
| |
| 2004-10-03 Hasso Tepper <hasso at quagga.net> |
| |
| * vtsyh_main.c: Enter into enable node by default. Disable node doesn't |
| make sense if we don't have any authentication for enable. |
| * vtysh.c: Implement "show running-daemons" command. |
| * vtysh.c: Use either integrated conf or daemon conf not both. Move |
| configuration command into "service" level. |
| * vtysh.c: Remove "write ..." commands from other nodes than enable. |
| We have "do ..." extension for that. |
| * vtysh_config.c, vtysh.c: Integrate vtysh configuration into |
| integrated one. |
| * vtysh_config.c: Use FORWARD_NODE and SERVICE_NODE vty nodes. |
| * vtysh_config.c: Make "service" lines unique in integrated config. |
| * vtysh.c: Make "service password-encryption" command work in vtysh. |
| * vtysh_config.c, vtysh.c, Makefile.am, extract.pl.in: Introduce line |
| vty commands in vtysh. Parse lib/vty.c for commands, but ignore |
| commands that don't make sense in vtysh. Closes Bugzilla #104. |
| * vtysh.c: Make "[enable] password" commands work in vtysh. Behavior |
| is similar to "log" commands - vtysh just passes commands to all |
| daemons. |
| * vtysh_main.c, vtysh_config.c, vtysh.h: Remove any code dealing with |
| configuration files specified from command line. We read/write files |
| from/to system location only (ie. remove -f again). |
| * Makefile.am: Parse zebra/router-id.c. |
| |
| 2004-09-26 Hasso Tepper <hasso at quagga.net> |
| |
| * vtysh.c: Fix compiler warning. |
| |
| 2004-09-17 Paul Jakma <paul@dishone.st> |
| |
| * vtysh.c: (vtysh_client_execute) trailling NULLs can be arbitrarily |
| split across reads, dont get confused by this and block forever. |
| |
| 2004-09-13 Paul Jakma <paul@dishone.st> |
| |
| * Makefile.am: extract.pl isnt in srcdir, it's always in the builddir. |
| remove zebra/irdp.c from list - dead. |
| * extract.pl.in: match on end of filenames, filename could contain |
| various preamble due to out of tree builds. Substitute in the |
| autoconf srcdir/builddir paths for includes to cpp. |
| |
| 2004-08-28 Hasso Tepper <hasso at quagga.net> |
| |
| * vtysh_main.c: Rename signal handling functions not to conflict |
| with functions from lib/sigevent.c. |
| |
| 2004-08-27 Hasso Tepper <hasso at quagga.net> |
| |
| * vtysh.c: Make "terminal length <0-512>" command work in vtysh. |
| |
| 2004-08-27 Hasso Tepper <hasso at quagga.net> |
| |
| * vtysh.c: Enable using ssh from ENABLE_NODE. |
| * vtysh_config.c: Make enable password uniq lines appear only once in |
| configuration. |
| * vtysh_main.c, vtysh_config.c, vtysh.h: Remove useless code which |
| searched configuration files from current directory. Add -f to |
| specify conf from command line. |
| |
| 2004-08-26 Hasso Tepper <hasso at quagga.net> |
| |
| * *.c: Cosmetical changes - strip long lines, fix multiline comments |
| style, indentation fixes, remove useless comments. |
| * vtysh.h: define VTYSH_INTERFACE. |
| * vtysh.c: Use VTYSH_INTERFACE where possible. Added some related TODO |
| items. |
| * vtysh.c: Move things around a little to reduce spaghetti mess. |
| * Makefile.am: Parse only needed files from zebra daemon while |
| building vtysh_cmd.c file to supress warnings. |
| |
| 2004-06-30 Greg Troxel <gdt@poblano.ir.bbn.com> |
| |
| * extract.pl.in: Rename from extract.pl, with @PERL@. |
| |
| * Makefile.am: Add vtysh_cmds.c to CLEANFILES. |
| |
| 2004-06-20 Hasso Tepper <hasso@estpak.ee> |
| |
| * extract.pl: Zebra daemon has access lists as well. |
| |
| 2004-05-10 Hasso Tepper <hasso@estpak.ee> |
| |
| * vtysh.c: Workaround for most hated vtysh bug - Bugzilla #58. |
| |
| 2004-04-06 Hasso Tepper <hasso@estpak.ee> |
| |
| * vtysh_main.c: Don't save command to history if last command already |
| there is same. |
| * vtysh_main.c: Replace -e with -c. |
| * vtysh_main.c: Fix help. |
| |
| 2004-03-04 Hasso Tepper <hasso@estpak.ee> |
| |
| * vtysh.c: Remove using PAGER. |
| |
| 2004-01-15 Paul Jakma <paul@dishone.st> |
| |
| * vtysh_config.c: Fix up strlen to use correct string. |
| |
| 2003-12-23 Hasso Tepper <hasso@estpak.ee> |
| |
| * Makefile.am extract.pl vtysh.c vtysh.h vtysh_config.c: |
| isisd integration to vtysh. |
| |
| 2003-05-01 Sergiy Vyshnevetskiy <serg@vostok.net> |
| |
| vtysh.c: Program shouldn't terminate on pager execution failure |
| vtysh_user.c: configure support for openpam (freebsd5.0) |
| |
| 2003-04-19 Hasso Tepper <hasso@estpak.ee> |
| |
| * extract.pl vtysh.c vtysh.h: sync daemon's route-map commands to |
| have same syntax |
| |
| 2002-09-30 Paul Jakma <paulzebra@rs250.org> |
| |
| * vtysh.c: add 'write-config (integrated|daemon)' option |
| to specifiy whether write config commands should write |
| integrated Zebra.conf file and/or per daemon files. |
| Defaults to per daemon, unless this is turned off. |
| |
| 2002-07-07 Kunihiro Ishiguro <kunihiro@ipinfusion.com> |
| |
| * zebra-0.93 released. |
| |
| 2001-08-19 Kunihiro Ishiguro <kunihiro@ipinfusion.com> |
| |
| * zebra-0.92a released. |
| |
| 2001-08-15 Kunihiro Ishiguro <kunihiro@ipinfusion.com> |
| |
| * zebra-0.92 released. |
| |
| 2001-02-20 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vtysh.c (vtysh_client_config): Do not set bufsz to 120. |
| Suggested by: Matthew Grant <grantma@anathoth.gen.nz>. |
| |
| 2001-02-15 Hideto Yamakawa <yamakawa@dml.com> |
| |
| * vtysh.c (vtysh_client_execute): Call fflush after fprintf. |
| |
| * vtysh_config.c (vtysh_config_dump): Use VTYSH_PAGER if defined. |
| |
| 2001-02-14 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vtysh.c (vtysh_execute_func): Add fflush before pclose. |
| |
| 2001-02-10 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vtysh.c: VTY shell pager name. When environment variable |
| VTYSH_PAGER is defined, use it as VTY shell pager. |
| |
| 2001-02-09 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vtysh.c (vtysh_execute_func): Add pager argument for test of |
| pager invocation. |
| |
| 2001-02-08 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * extract.pl: Add -DHAVE_CONFIG_H option to cpp. |
| |
| 2001-02-08 Matthew Grant <grantma@anathoth.gen.nz> |
| |
| * vtysh.c (vtysh_client_config): Use sysconf to determine output |
| buffer size. |
| (vtysh_write_memory): Set umask 0077. |
| (vtysh_connect): Check permission to the socket. |
| |
| 2001-02-01 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * zebra-0.91 is released. |
| |
| 2001-01-31 Michael Rozhavsky <mrozhavsky@opticalaccess.com> |
| |
| * vtysh.c (new_completion): Fix problem of appending space when |
| completion is executed. |
| |
| 2001-01-23 Akihiro Mizutani <mizutani@dml.com> |
| |
| * vtysh.c (vtysh_write_terminal): "write terminal" to all node. |
| |
| 2001-01-15 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vtysh.c (vtysh_execute): Fix unconditional lock by other VTY. |
| Suggested by Hideto Yamakawa <yamakawa@dml.com>. |
| |
| 2001-01-09 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * zebra-0.90 is released. |
| |
| 2001-01-07 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vtysh.h (ZEBRA_PATH): Fix new vtysh path. Reported by "Matt |
| Ranney" <mjr@ranney.com> |
| |
| 2000-11-06 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vtysh.c (DEFUNSH): Add "address-family vpnv4" DEFUNSH. |
| |
| 2000-10-23 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vtysh.c (execute_command): Add two arguemnt support for |
| executing child process. |
| (vtysh_telnet_port): New command "telnet WORD PORT" is added. |
| |
| 2000-10-23 Akihiro Mizutani <mizutani@dml.com> |
| |
| * vtysh.c (vtysh_write_memory): Display [OK] when configuration is |
| saved without problem. |
| |
| 2000-10-20 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vtysh.c (vtysh_config_from_file): "key chain" command with -b |
| flag problem is fixed. |
| |
| 2000-10-17 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vtysh_user.c: Change to use linklist.c. |
| |
| 2000-10-02 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * Makefile.am (noinst_HEADERS): Add vtysh_user.h. |
| |
| * zebra-0.89 is released. |
| |
| 2000-09-22 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vtysh_main.c: Declare thread master. |
| |
| 2000-08-25 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vtysh_main.c (main): Add missing --help procudure. Reported by |
| Patrick Rother <krd@roka.net>. |
| |
| 2000-08-22 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vtysh.c (DEFUNSH): "interface IFNAME" works. |
| |
| 2000-08-20 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vtysh_user.c: Change name from vtysh_pam.c. |
| |
| * vtysh.conf.sample: New file for vtysh configuration. |
| |
| 2000-08-19 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vtysh_pam.c (vtysh_pam): New file for PAM. |
| |
| 2000-08-17 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * zebra-0.88 is released. |
| |
| 2000-08-02 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * Makefile.am (vtysh_LDADD): Remove -lreadline and -lncurses. |
| |
| * vtysh.c (vtysh_connect): Use AF_UNIX instead of AF_LOCAL for |
| backward compatibility. |
| |
| 2000-07-09 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * extract.pl: Change regexp to match DEFUN and ALIAS at the same |
| time. |
| |
| 2000-07-05 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vtysh.c (signal_init): Ignore SIGPIPE signal. |
| |
| 2000-07-04 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * extract.pl: ALIAS command can be extracted by extract.pl. |
| |
| 2000-07-03 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * extract.pl: Fix scalar and array semantics. |
| |
| * vtysh.c (vtysh_telnet): Add "telnet" client command. |
| |
| 2000-07-02 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vtysh.c (main): Add -e flag for passing command from arugment. |
| (vtysh_ping): Add "ping" command for test of command execution. |
| (init_node): Add "traceroute" command. |
| (vtysh_start_shell): Add "start-shell", "start-shell bash", |
| "start-shell zsh". |
| (sigint): Add check for execute_flag for avoid duplicate prompt. |
| |
| 2000-06-28 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vtysh.c: New file for vty shell. |
| * vtysh.h: Likewise. |
| * extract.pl: Likewise. |
| * vtysh_cmd.c: Generate by extract.pl. |