Initial revision
diff --git a/ports/Makefile b/ports/Makefile
new file mode 100644
index 0000000..d085d06
--- /dev/null
+++ b/ports/Makefile
@@ -0,0 +1,58 @@
+# New ports collection makefile for: zebra
+# Version required: 2.1.5
+# Date created: 28 Feb 1998
+# Whom: seirios@matrix.iri.co.jp
+#
+
+#DISTNAME= zebra-980224
+DISTNAME= zebra-current
+PKGNAME= zebra
+CATEGORIES= net
+MASTER_SITES= ftp://ftp.zebra.org/pub/zebra/
+
+MAINTAINER= seirios@matrix.iri.co.jp
+
+WRKSRC= ${WRKDIR}/zebra-current
+
+#### Under constructing, We cannot support md5
+NO_CHECKSUM= yes
+
+do-build:
+ @(cd ${WRKSRC}; sh ./configure; make)
+
+post-install:
+ @if [ ! -f ${PREFIX}/etc/rc.d/zebra.sh ]; then \
+ echo "Installing ${PREFIX}/etc/rc.d/zebra.sh startup file."; \
+ echo "#!/bin/sh" > ${PREFIX}/etc/rc.d/zebra.sh; \
+ echo "# zebra" >> ${PREFIX}/etc/rc.d/zebra.sh; \
+ echo "if [ -x /usr/local/sbin/zebra -a ! -f /var/run/zebra.pid -a -f /usr/local/etc/zebra.conf ]; then" >> ${PREFIX}/etc/rc.d/zebra.sh; \
+ echo " /usr/local/sbin/zebra -d -f /usr/local/etc/zebra.conf" >> ${PREFIX}/etc/rc.d/zebra.sh; \
+ echo " echo -n ' zebra'" >> ${PREFIX}/etc/rc.d/zebra.sh; \
+ echo "fi" >> ${PREFIX}/etc/rc.d/zebra.sh; \
+ echo "# bgpd" >> ${PREFIX}/etc/rc.d/zebra.sh; \
+ echo "if [ -x /usr/local/sbin/bgpd -a ! -f /var/run/bgpd.pid -a -f /usr/local/etc/bgpd.conf ]; then" >> ${PREFIX}/etc/rc.d/zebra.sh; \
+ echo " /usr/local/sbin/bgpd -d -f /usr/local/etc/bgpd.conf" >> ${PREFIX}/etc/rc.d/zebra.sh; \
+ echo " echo -n ' bgpd'" >> ${PREFIX}/etc/rc.d/zebra.sh; \
+ echo "fi" >> ${PREFIX}/etc/rc.d/zebra.sh; \
+ echo "# ripd" >> ${PREFIX}/etc/rc.d/zebra.sh; \
+ echo "if [ -x /usr/local/sbin/ripd -a ! -f /var/run/ripd.pid -a -f /usr/local/etc/ripd.conf ]; then" >> ${PREFIX}/etc/rc.d/zebra.sh; \
+ echo " /usr/local/sbin/ripd -d -f /usr/local/etc/ripd.conf" >> ${PREFIX}/etc/rc.d/zebra.sh; \
+ echo " echo -n ' ripd'" >> ${PREFIX}/etc/rc.d/zebra.sh; \
+ echo "fi" >> ${PREFIX}/etc/rc.d/zebra.sh; \
+ echo "# ripngd" >> ${PREFIX}/etc/rc.d/zebra.sh; \
+ echo "if [ -x /usr/local/sbin/ripngd -a ! -f /var/run/ripd.pid -a -f /usr/local/etc/ripd.conf ]; then" >> ${PREFIX}/etc/rc.d/zebra.sh; \
+ echo " /usr/local/sbin/ripngd -d -f /usr/local/etc/ripd.conf" >> ${PREFIX}/etc/rc.d/zebra.sh; \
+ echo " echo -n ' ripngd'" >> ${PREFIX}/etc/rc.d/zebra.sh; \
+ echo "fi" >> ${PREFIX}/etc/rc.d/zebra.sh; \
+ chmod 751 ${PREFIX}/etc/rc.d/zebra.sh; \
+ fi
+ @echo "If you will access zebra,bgpd,ripd,ripngd with telnet,";
+ @echo "then you add some line (written under this line) to /etc/services";
+ @echo " zebrasrv 2600/tcp # zebra service";
+ @echo " zebra 2601/tcp # zebra vty";
+ @echo " ripd 2602/tcp # RIPd vty";
+ @echo " ripngd 2603/tcp # RIPngd vty";
+ @echo " ospfd 2604/tcp # OSPFd vty";
+ @echo " bgpd 2605/tcp # BGPd vty";
+
+.include <bsd.port.mk>
diff --git a/ports/README b/ports/README
new file mode 100644
index 0000000..a650eaa
--- /dev/null
+++ b/ports/README
@@ -0,0 +1 @@
+This directory contain files for making FreeBSD package.
diff --git a/ports/files/md5 b/ports/files/md5
new file mode 100644
index 0000000..520c348
--- /dev/null
+++ b/ports/files/md5
@@ -0,0 +1 @@
+MD5 (zebra-980224.tar.gz) = c6887645741200c43341156c168c7034
diff --git a/ports/pkg/COMMENT b/ports/pkg/COMMENT
new file mode 100644
index 0000000..53c55e3
--- /dev/null
+++ b/ports/pkg/COMMENT
@@ -0,0 +1 @@
+Zebra Routing protocol daemon
diff --git a/ports/pkg/DESCR b/ports/pkg/DESCR
new file mode 100644
index 0000000..0c8d01b
--- /dev/null
+++ b/ports/pkg/DESCR
@@ -0,0 +1,75 @@
+=============
+WHAT IS ZEBRA
+=============
+ Zebra is a free software that manages TCP/IP based routing protocol.
+ It takes multi-server and multi-thread approach to resolve the current
+complexity of the Internet.
+
+ Currently zebra is still under development, so If you want to use zebra,
+I strongly recommend you to get the latest version of zebra.
+ Zebra snapshot is released on every monday.
+
+===================
+SUPPORTED Protocols
+===================
+ Zebra supports both IPv4 and IPv6 :-)
+ For supporting IPv4 Routing protocols is here
+ RIP (both version1 and version2)
+ RIPv2 supports both Multicast and Broadcast
+ BGP (only support BGP4)
+
+ For supporting IPv6 Routing protocols is here
+ RIPng
+ BGP4+
+
+===================
+Supported plat-home
+===================
+ Now zebra is testing on
+ o FreeBSD 2.2.8
+ -- without IPv6 ;-)
+ -- with KAME
+ -- with INRIA IPv6 protocol stack.
+
+ o GNU/Linux 2.2.2
+ o GNU/Linux 2.0.36
+
+===========
+ZEBRA Ports
+===========
+ Each daemon has each own terminal interface. Also zebra has communication
+port which provides several services to other daemons. Below is zebra ports
+list.
+
+zebrasrv 2600/tcp # zebra service
+zebra 2601/tcp # zebra vty
+ripd 2602/tcp # RIPd vty
+ripngd 2603/tcp # RIPngd vty
+ospfd 2604/tcp # OSPFd vty
+bgpd 2605/tcp # BGPd vty
+
+I recommend you to add upper list to /etc/services.
+
+====================
+For More Information
+====================
+ Web page is located at:
+ http://www.zebra.org/
+
+ Alpha version source file can be found at:
+ ftp://ftp.zebra.org/pub/zebra/
+
+ Mailing List is here
+ zebra@zebra.org
+ zebra-jp@zebra.org
+
+ If you want to join zebra mailing list, mail to
+ majordomo@zebra.org
+ and you write
+ subscribe zebra
+ -- if you want to talk with English
+ subscribe zebra-jp
+ -- if you want to talk with Japanese
+ on Mail BODY (Not Subject).
+
+Enjoy.
diff --git a/ports/pkg/PLIST b/ports/pkg/PLIST
new file mode 100644
index 0000000..ccc69eb
--- /dev/null
+++ b/ports/pkg/PLIST
@@ -0,0 +1,8 @@
+sbin/zebra
+sbin/bgpd
+sbin/ripd
+etc/bgpd.conf.sample
+etc/ripd.conf.sample
+etc/zebra.conf.sample
+etc/rc.d/zebra.sh
+info/zebra.info