| 2008-07-22 Paul Jakma <paul.jakma@sun.com> |
| |
| * bgp_{packet,route,advertise}.c: change to compiler testing of |
| DISABLE_BGP_ANNOUNCE, rather than cpp. |
| |
| 2008-07-22 MIYAJIMA Mitsuharu <miyajima.mitsuharu@anchor.jp> |
| |
| * bgp_packet.c: (bgp_update_packet_eor) Fix crash triggerable |
| if a bgpd was compiled with --disable-bgp-announce and if GR is |
| advertised by peer. |
| |
| 2008-07-22 Paul Jakma <paul.jakma@sun.com> |
| |
| * bgp_community.c: (community_str2com) assigns defaults to local |
| vars |
| * bgp_attr.c: (bgp_attr_parse) match format specifier to arg |
| * bgp_table.{c,h}: (bgp_table_top) can take a * to a const, quelling |
| warning in bgp_route.c |
| |
| 2008-07-21 Paul Jakma <paul.jakma@sun.com> |
| |
| |
| * bgp_packet.c: (bgp_open_receive) fix warning in a zlog call |
| * bgp_vty.c: (bgp_vty_return) add return code |
| * bgpd.c: (bgp_master_init) setup the socket list. |
| * bgp_network.c: Remove the dual IPv4/6 socket thing for now, which |
| was implemented by Michael, until such time as its clear its |
| required for Linux (see sockopt comments). IPv6 support, including |
| IPv4 sessions on AF_INET6 sockets, therefore is broken, and the |
| '-l 0.0.0.0' arguments would need to be given to bgpd to make |
| things work here. |
| |
| 2008-07-21 Michael H. Warfield <mhw@wittsend.com> |
| YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> |
| Tomohiko Kusuda <kusuda@inetcore.com> |
| Leigh Brown <leigh@solinno.co.uk> |
| |
| * bgp_network.c: (bgp_md5_set_one) shim between libzebra tcp-md5 |
| sockopt and bgpd. |
| (bgp_md5_set_socket) Helper for bgp_connect |
| (bgp_md5_set) setup TCP-MD5SIG for the given peer. |
| (bgp_connect) call out to bgp_md5_set_socket for the outgoing |
| connect socket. |
| (bgp_socket) save references to the listen sockets, needed if |
| TCP-MD5SIG is applied later or changed. |
| * bgp_vty.c: (*neighbor_password_cmd) New 'neighbor ... password' |
| commands. |
| * bgpd.c: (peer_{new,delete) manage TCP-MD5 password |
| (peer_group2peer_config_copy) inherit TCP-MD5 password |
| (peer_password_{un,}set) orchestrate the whole add/remove of TCP-MD5 |
| passwords: applying checks, stopping peers, and trying to return |
| errors to UI, etc. |
| (bgp_config_write_peer) save password. |
| Fix missing newline in writeout of neighbor ... port. |
| |
| 2008-07-02 MIYAJIMA Mitsuharu <miyajima.mitsuharu@anchor.jp> |
| |
| * *.c: CMD_AS_RANGE was being used inside command strings, and thus |
| not being expanded, fix by dequoting. |
| |
| 2008-07-02 Stephen Hemminger <stephen.hemminger@vyatta.com> |
| |
| * bgp_table.{c,h}: (bgp_table_finish) Take a double pointer and |
| scrub pointer in caller, so fixing double-free crashes seen |
| with route-server-client configuration. |
| * *.c: Adjust all callers of bgp_table_finish |
| |
| 2008-07-02 Paul Jakma <paul.jakma@sun.com> |
| |
| * bgp_table.{c,h}: (bgp_node_delete, bgp_table_free) shouldn't be |
| exported. |
| |
| 2008-06-07 Paul Jakma <paul@jakma.org> |
| |
| * bgp_attr.{c,h}: (bgp_mp_{un,}reach_parse) export, for unit tests. |
| * bgp_attr.c: (bgp_mp_reach_parse) Add logging. Tighten length test |
| to bounds check against the attribute length rather than the |
| stream length.. |
| |
| 2008-06-01 jfletche@gmail.com |
| |
| * bgp_attr.c: (bgp_attr_aspathlimit) fix silly bug in flags check |
| that was causing BGP to drop sessions if it received a |
| aspath-limit with partial set. Fixes bug #419. |
| |
| 2008-04-10 Denis Ovsienko |
| |
| * bgp_aspath.[ch]: (aspath_filter_exclude) New function allows |
| filtering out arbitrary ASns from AS_PATH attribute. |
| * bgp_aspath.[ch]: (aspath_print_vty) Accept suffix to let calling |
| functions signal, if they want the separator or not. |
| * bgp_route.c: (route_vty_out, route_vty_out_tmp, damp_route_vty_out, |
| flap_route_vty_out, route_vty_out_detail) Fix aspath_print_vty() |
| calls to have AS_PATH output nicely. |
| * bgp_routemap.c: Introduce "set as-path exclude" route-map command |
| to employ new filtering functionality. |
| |
| 2008-03-13 Paul Jakma <paul.jakma@sun.com> |
| |
| * (various) Remove 0 entries from struct message's, unneeded due to |
| recent improvements in mes_lookup/LOOKUP. |
| |
| 2008-01-29 Jorge Boncompte <jorge@dti2.net> |
| |
| * bgp_network.c: (bgp_socket) IPv4-only version crashes if -l is not |
| used as address will be null. |
| |
| 2007-12-22 Paul Jakma <paul.jakma@sun.com> |
| |
| * Fix series of vulnerabilities reported by "Mu Security |
| Research Team", where bgpd can be made to crash by sending |
| malformed packets - requires that bgpd be configured with a |
| session to the peer. |
| * bgp_attr.c: (bgp_attr_as4_path) aspath_parse may fail, only |
| set the attribute flag indicating AS4_PATH if we actually managed |
| to parse one. |
| (bgp_attr_munge_as4_attrs) Assert was too general, it is possible |
| to receive AS4_AGGREGATOR before AGGREGATOR. |
| (bgp_attr_parse) Check that we have actually received the extra |
| byte of header for Extended-Length attributes. |
| * bgp_attr.h: Fix BGP_ATTR_MIN_LEN to account for the length byte. |
| * bgp_open.c: (cap_minsizes) Fix size of CAPABILITY_CODE_RESTART, |
| incorrect -2 left in place from a development version of as4-path |
| patch. |
| * bgp_packet.c: (bgp_route_refresh_receive) ORF length parameter |
| needs to be properly sanity checked. |
| |
| 2007-12-18 Denis Ovsienko |
| |
| * bgp_routemap.c: (no_set_aspath_prepend) This command cancelled |
| existing "set" command regardless if "no set" matched it or not. |
| Fixed. |
| |
| 2007-11-13 Paul Jakma <paul.jakma@sun.com> |
| |
| * bgp_main.c: Small fix, format string parameters should never |
| be NULL - it's not strictly valid and some libc's don't let |
| you away with. |
| |
| 2007-10-30 Nick Hilliard <nick@inex.ie> |
| |
| * bgp_main.c: Add 'listenon' argument, to pass address to bind |
| to. |
| * bgp_network.c: (bgp_socket) Extend to take bind address. |
| * bgpd.c: (bgp_init) Pass stored address. |
| * bgpd.h: (struct bgp_master) storage for bind address |
| |
| 2007-09-27 Paul Jakma <paul.jakma@sun.com> |
| |
| * bgp_aspath.c: (assegment_normalise) remove duplicates from |
| from sets. |
| (aspath_reconcile_as4) disregard a broken part of the RFC around |
| error handling in path reconciliation. |
| |
| 2007-09-25 Paul Jakma <paul.jakma@sun.com> |
| |
| * bgp_open.c: (peek_for_as4_capability) Fix to work. |
| * bgp_packet.c: (bgp_open_receive) Fix sanity check of as4. |
| |
| 2007-09-18 Paul Jakma <paul.jakma@sun.com> |
| |
| * bgp_open.c: (bgp_capability_as4) debug printf inline with others. |
| (peek_for_as4_capability) There's no need to signal failure, as |
| failure is better dealt with through full capability parser - |
| just return the AS4, simpler. |
| * bgp_packet.c: (bgp_open_receive) Update to match |
| peek_for_as4_capability change. |
| Allow use of BGP_AS_TRANS by 2b speakers. |
| Use NOTIFY_OPEN_ERR rather than CEASE for OPEN parsing errors. |
| (bgp_capability_msg_parse) missing argument to debug print |
| (bgp_capability_receive) missing return values. |
| |
| |
| 2007-07-25 Paul Jakma <paul.jakma@sun.com> |
| |
| * Remove 2-byte size macros, just make existing macros take |
| argument to indicate which size to use. |
| Adjust all users - typically they want '1'. |
| * bgp_aspath.c: (aspath_has_as4) New, return 1 if there are any |
| as4's in a path. |
| (aspath_put) Return the number of bytes actually written, to |
| fix the bug Juergen noted: Splitting of segments will change |
| the number of bytes written from that already written to the |
| AS_PATH header. |
| (aspath_snmp_pathseg) Pass 2-byte flag to aspath_put. SNMP |
| is still defined as 2b. |
| (aspath_aggregate) fix latent bug. |
| (aspath_reconcile_as4) AS_PATH+NEW_AS_PATH reconciliation |
| function. |
| (aspath_key_make) Hash the AS_PATH string, rather than |
| just taking the addition of assegment ASes as the hash value, |
| hopefully sligthly more collision resistant. |
| (bgp_attr_munge_as4_attrs) Collide the NEW_ attributes |
| together with the OLD 2-byte forms, code Juergen |
| had in bgp_attr_parse but re-organised a bit. |
| (bgp_attr_parse) Bunch of code from Juergen moves |
| to previous function. |
| (bgp_packet_attribute) Compact significantly by |
| just /always/ using extended-length attr header. |
| Fix bug Juergen noted, by using aspath_put's |
| (new) returned size value for the attr header rather |
| than the (guesstimate) of aspath_size() - the two could |
| differ when aspath_put had to split large segments, unlikely |
| this bug was ever hit in the 'wild'. |
| (bgp_dump_routes_attr) Always use extended-len and |
| use aspath_put return for header length. Output 4b ASN |
| for AS_PATH and AGGREGATOR. |
| * bgp_ecommunity.c: (ecommunity_{hash_make,cmp}) fix |
| hash callback declarations to match prototypes. |
| (ecommunity_gettoken) Updated for ECOMMUNITY_ENCODE_AS4, |
| complete rewrite of Juergen's changes (no asdot support) |
| * bgp_open.c: (bgp_capability_as4) New, does what it says |
| on the tin. |
| (peek_for_as4_capability) Rewritten to use streams and |
| bgp_capability_as4. |
| * bgp_packet.c: (bgp_open_send) minor edit |
| checked (in the abstract at least) with Juergen. |
| Changes are to be more accepting, e.g, allow AS_TRANS on |
| a 2-byte session. |
| * (general) Update all commands to use CMD_AS_RANGE. |
| * bgp_vty.c: (bgp_clear) Fix return vals to use CMD_.. |
| Remove stuff replicated by VTY_GET_LONG |
| (bgp_clear_vty) Return bgp_clear directly to vty. |
| |
| |
| 2007-07-25 Juergen Kammer <j.kammer@eurodata.de> |
| |
| * (general) AS4 support. |
| * bgpd.h: as_t changes to 4-bytes. |
| * bgp_aspath.h: Add BGP_AS4_MAX and BGP_AS_TRANS defines. |
| * bgp_aspath.c: AS_VALUE_SIZE becomes 4-byte, AS16_VALUE_SIZE |
| added for 2-byte. |
| Add AS16 versions of length calc macros. |
| (aspath_count_numas) New, count number of ASes. |
| (aspath_has_as4) New, return 1 if there are any as4's in a |
| path. |
| (assegments_parse) Interpret assegment as 4 or 2 byte, |
| according to how the caller instructs us, with a new |
| argument. |
| (aspath_parse) Add use32bit argument to pass to |
| assegments_parse. Adjust all its callers to pass 1, unless |
| otherwise noted. |
| (assegment_data_put) Adjust to be able to write 2 or 4 byte |
| AS, according to new use32bit argument. |
| (aspath_put) Adjust to write 2 or 4. |
| (aspath_gettoken) Use a long for passed in asno. |
| * bgp_attr.c: (attr_str) Add BGP_ATTR_AS4_PATH and |
| BGP_ATTR_AS4_AGGREGATOR. |
| (bgp_attr_aspath) Call aspath_parse with right 2/4 arg, as |
| determined by received-capability flag. |
| (bgp_attr_aspath_check) New, code previously in attr_aspath |
| but moved to new func so it can be run after NEW_AS_PATH |
| reconciliation. |
| (bgp_attr_as4_path) New, handle NEW_AS_PATH. |
| (bgp_attr_aggregator) Adjust to cope with 2/4 byte ASes. |
| (bgp_attr_as4_aggregator) New, read NEW_AGGREGATOR. |
| (bgp_attr_parse) Add handoffs to previous parsers for the two |
| new AS4 NEW_ attributes. |
| Various checks added for NEW/OLD reconciliation. |
| (bgp_packet_attribute) Support 2/4 for AS_PATH and |
| AGGREGATOR, detect when NEW_ attrs need to be sent. |
| * bgp_debug.{c,h}: Add 'debug bgp as4'. |
| * bgp_dump.c: MRTv2 support, unconditionally enabled, which |
| supports AS4. Based on patches from Erik (RIPE?). |
| * bgp_ecommunity.c: (ecommunity_ecom2str) ECOMMUNITY_ENCODE_AS4 |
| support. |
| * bgp_open.c: (peek_for_as4_capability) New, peek for AS4 |
| capability prior to full capability parsing, so we know which |
| ASN to use for struct peer lookup. |
| (bgp_open_capability) Always send AS4 capability. |
| * bgp_packet.c: (bgp_open_send) AS4 handling for AS field |
| (bgp_open_receive) Peek for AS4 capability first, and figure |
| out which AS to believe. |
| * bgp_vty.c: (bgp_show_peer) Print AS4 cap |
| |
| 2007-09-17 Paul Jakma <paul.jakma@sun.com> |
| |
| * bgp_open.c: (bgp_capability_mp) We were setting |
| afc_nego[safi][safi] rather than afc_nego[afi][safi], thus |
| failling to announce any non-IPv4 prefixes. Remove the extra, |
| typo-ed character. |
| |
| 2007-09-07 Paul Jakma <paul.jakma@sun.com> |
| |
| * (general) bgpd can be made crash by remote peers if debug |
| bgp updates is set, due to NULL pointer dereference. |
| Reported by "Mu Security Research Team", |
| <security@musecurity.com>. |
| * bgp_attr.c: (bgp_attr_community) If community length is 0, |
| don't set the community-present attribute bit, just return |
| early. |
| * bgp_debug.c: (community_str,community_com2str) Check com |
| pointer before dereferencing. |
| |
| 2007-08-27 Paul Jakma <paul.jakma@sun.com> |
| |
| * bgp_route.c: (bgp_announce_check) Fix bug #398, slight |
| modification of Vladimir Ivanov's suggested fix - to keep |
| memory alloc conditional. |
| (bgp_process_announce_selected) Don't take struct attr as |
| argument, none of the callers need it and it needlessly |
| distances allocation from use. |
| Free the extended attr, the attr itself is on the stack. |
| Fix bad indentation. |
| * bgp_attr.c: (bgp_packet_attribute) Remove incorrect assert, |
| and adjust conditional to test attr->extra, diagnosis by |
| Vladimir Ivanov in bug #398. |
| |
| 2007-08-27 Vladimir Ivanov <wawa@yandex-team.ru> |
| |
| * bgp_route.c: (bgp_announce_check_rsclient) copy of |
| ri->attr is no longer deep enough, due to addition of |
| attr->extra. It should use bgp_attr_dup, as |
| bgp_announce_check() does. |
| |
| 2007-08-23 Paul Jakma <paul.jakma@sun.com> |
| |
| * bgp_regex.c: (bgp_regcomp) Pass NOSUB flag to regcomp to |
| prevent parsing of substitutions, which can have profound |
| performance effects on bgpd and are of no use to the CLI |
| anyway. How much it helps depends on the regex |
| implementation. |
| |
| 2007-07-31 Paul Jakma <paul.jakma@sun.com> |
| |
| * (general) Support for draft-ietf-idr-as-pathlimit-03. |
| * bgp_attr.h: (struct attr) Add pathlimit struct |
| bgp_attr.c: (attr_str) Add BGP_ATTR_AS_PATHLIMIT string. |
| (attrhash_key_make) tally pathlimit too |
| (attrhash_cmp) cmp pathlimit attr |
| (bgp_attr_aspathlimit) New, parse AS_PATHLIMIT attr. |
| (bgp_attr_parse) ditto |
| (bgp_packet_attribute) Write out AS_PATHLIMIT when set |
| (bgp_dump_routes_attr) ditto |
| * bgp_route.h: (struct bgp_static) Add TTL field |
| * bgp_route.c: (bgp_announce_check) Drop paths that are over |
| their hop-count TTL before sending via EBGP. |
| Mangle ASN in pathlimit for confeds/private as best we can. |
| (bgp_static_update_{rsclient,main}) Add any configure pathlimit |
| information. |
| (bgp_pathlimit_update_parents) New, update atomic-aggr setting for |
| parents of an aspathlimit'ed static. |
| (bgp_static_set) Add TTL argument, for all the 'bgp network' |
| commands. |
| Call previous for TTL changed statics. |
| (bgp_static_unset) Call pathlimit_update_parents. |
| (various bgp network commands) Add 'pathlimit <0-255>' qualifier |
| to all the various forms, bar route-map - which can set ttl |
| itself. |
| * bgp_routemap.c: (general) Add support for 'set pathlimit ttl' and |
| 'match pathlimit as'. |
| |
| 2007-07-26 Paul Jakma <paul.jakma@sun.com> |
| |
| * (general) Clean up and compact capability parsing slightly. |
| Consolidate validation of length and logging of generic TLV, and |
| memcpy of capability data, thus removing such from cap specifc |
| code (not always present or correct). |
| * bgp_open.h: Add structures for the generic capability TLV header |
| and for the data formats of the various specific capabilities we |
| support. Hence remove the badly named, or else misdefined, struct |
| capability. |
| * bgp_open.c: (bgp_capability_vty_out) Use struct capability_mp_data. |
| Do the length checks *before* memcpy()'ing based on that length |
| (stored capability - should have been validated anyway on input, |
| but..). |
| (bgp_afi_safi_valid_indices) new function to validate (afi,safi) |
| which is about to be used as index into arrays, consolidates |
| several instances of same, at least one of which appeared to be |
| incomplete.. |
| (bgp_capability_mp) Much condensed. |
| (bgp_capability_orf_entry) New, process one ORF entry |
| (bgp_capability_orf) Condensed. Fixed to process all ORF entries. |
| (bgp_capability_restart) Condensed, and fixed to use a |
| cap-specific type, rather than abusing capability_mp. |
| (struct message capcode_str) added to aid generic logging. |
| (size_t cap_minsizes[]) added to aid generic validation of |
| capability length field. |
| (bgp_capability_parse) Generic logging and validation of TLV |
| consolidated here. Code compacted as much as possible. |
| * bgp_packet.c: (bgp_open_receive) Capability parsers now use |
| streams, so no more need here to manually fudge the input stream |
| getp. |
| (bgp_capability_msg_parse) use struct capability_mp_data. Validate |
| lengths /before/ memcpy. Use bgp_afi_safi_valid_indices. |
| (bgp_capability_receive) Exported for use by test harness. |
| * bgp_vty.c: (bgp_show_summary) fix conversion warning |
| (bgp_show_peer) ditto |
| * bgp_debug.h: Fix storage 'extern' after type 'const'. |
| |
| 2007-07-31 Lorenzo Colitti <lorenzo@colitti.com> |
| |
| * bgp_dump.c: (general) Add comments to code. |
| (bgp_dump_interval_add) remove some redundant lines. |
| (bgp_dump_set) Use enum for type argument. |
| Avoid scheduling dump twice if exact same command |
| is given twice.. |
| |
| 2007-06-22 Paul Jakma <paul.jakma@sun.com> |
| |
| * bgp_fsm.c: (struct FSM) Bug #368. TCP Errors during OpenSent |
| should cycle to Active, not to Idle or else peer bringup can |
| race and cycle Idle<->Active. Reported and fix tested by |
| Mukesh Agrawal. |
| |
| 2007-05-25 Paul Jakma <paul.jakma@sun.com> |
| |
| * bgp_route.c: (bgp_default_originate) Sanity check added |
| previously was broken and always failed, thus this function |
| never could run, bug #370. |
| |
| 2007-05-03 Paul Jakma <paul.jakma@sun.com> |
| |
| * bgp_route.h: (struct info) Move less frequently used |
| fields to a lazily allocated struct info_extra. |
| Export bgp_info_extra_get |
| * bgp_route.c: (bgp_info_extra_new) allocate extra |
| (bgp_info_extra_free) Free damp info and the info_extra. |
| (bgp_info_extra_get) Retrieve the info_extra of a struct |
| info, allocating as required. |
| (generally) adjust to use info->extra |
| * bgp_damp.c: (generally) use bgp_info_extra_get to access |
| dampinfo |
| * bgp_attr.h: Move rarely allocated attributes from struct attr |
| to a struct attr_extra, for a substantial saving in size of |
| struct attr. |
| * bgp_attr.c: (bgp_attr_extra_{new,free}), new, self-explanatory. |
| (bgp_attr_extra_get) Get the attr_extra for a given struct |
| attr, allocating it if needs be. |
| (bgp_attr_dup) Shallow copy the struct attr and its attr_extra. |
| (generally) adjust to know about attr->extra. |
| * bgp_debug.c: (bgp_dump_attr) ditto |
| * bgp_vty.c: (show_bgp_memory) print attr and info extra sizes. |
| * bgp_nexthop.c: (generally) adjust to know about attr->extra |
| and info->extra. |
| * bgp_{packet,routemap,snmp,zebra}.c: ditto |
| |
| 2007-04-22 Sebastien Tandel <sebastien@tandel.be> |
| * bgp_advertise.c : (baa_hash_alloc, baa_hash_key, baa_hash_cmp) |
| conforms to quagga hash API. Defines _hash_[alloc|key|cmp] with |
| void * arguments as defined by the API. |
| * bgp_aspath.c,h : (aspath_key_make) conforms to quagga hash API. |
| Defines _hash_[alloc|key|cmp] with void * arguments as defined by |
| the API. |
| * bgp_attr.c,h : (cluster_hash_alloc, cluster_hash_key_make, |
| cluster_hash_cmp, transit_hash_alloc, transit_hash_key_make, |
| transit_hash_cmp, attrhash_key_make, attrhash_cmp, |
| bgp_attr_hash_alloc) conforms to quagga hash API. Defines |
| _hash_[alloc|key|cmp] with void * arguments as defined by the API. |
| * bgp_attr.h : Definition of BGP_ATTR_DEFAULT_WEIGHT. |
| * bgp_attr.c : (bgp_attr_default_intern) now uses |
| bgp_attr_default_set instead of duplicating the same code. |
| (general) Use of BGP_ATTR_DEFAULT_WEIGHT. Replace two 16 by |
| IPV6_MAX_BYTELEN. |
| |
| 2007-04-15 Sebastien Tandel <sebastien@tandel.be> |
| |
| * bgp_aspath.c: (aspath_as_add, aspath_segment_add) Minor performance |
| optimization: while loop should test one pointer instead of two. |
| |
| 2007-04-08 Paul Jakma <paul.jakma@sun.com> |
| |
| * bgp_route.c: (general) Same bug as fixed on 2006-11-28 by ajs for |
| bgp static routes, but for main BGP RIB: Quick 'flap' of routes |
| can cause bgpd to mistake a new route for a duplicate route, |
| due to presence of removed, but not yet processed BGP RIB entry. |
| (bgp_update_rsclient) Ignore REMOVED bgp_info for duplicate, |
| restore route instead. |
| (bgp_update_main) Ditto. |
| * bgp_attr.c: (general) Bug #354: parsing of MP_REACH_NLRI and |
| MP_UNREACH_NLRI does not take sufficient care to ensure reads |
| from stream buffer stay in-bounds. Hence bgpd may attempt to read |
| beyond end of stream, if given a crafted packet. As it uses the |
| stream access methods to do so, this will typically result in |
| assert() being hit in stream.c. Where code is compiled without |
| assert() enabled, result is unknown. |
| (struct message attr_str) should be static. |
| (bgp_mp_reach_parse) Carefully check length remaining in stream |
| against amount desired to read from stream, prior to each read, |
| particularly where lengths are conditional on data obtained from |
| stream - using STREAM_READABLE. |
| Remove code to parse SNPA-number, it's a defunct field and changed |
| to a fixed size in latest BGP MP update RFC - log warning if |
| SNPA-number is not 0. |
| (bgp_mp_unreach_parse) Check withdraw_length carefully against |
| STREAM_READABLE. |
| (bgp_attr_parse) If attribute-parser function returns error, log |
| warning. |
| Log attribute type on mismatch. |
| |
| 2007-04-07 Paul Jakma <paul.jakma@sun.com> |
| |
| * bgpd.c: (general) Fix bug #352 |
| (bgp_config_write_family_header) write ipv6/multicast |
| address family header. |
| (bgp_config_write) write out ipv6 multicast AF config. |
| |
| 2007-02-22 Paul Jakma <paul.jakma@sun.com> |
| |
| * bgp_fsm.c: (bgp_fsm_change_status) Handle state change into |
| clearing or greater here. Simpler. |
| (bgp_event) Clearing state change work moved to previous |
| * bgp_route.c: (bgp_clear_route_node) Clearing adj-in here |
| is too late, as it leaves a race between a peer being deleted |
| and an identical peer being configured before clearing |
| completes, leading to a crash. |
| Simplest fix is to clean peers Adj-in up-front, rather than |
| queueing such work. |
| (bgp_clear_route_table) Clear peer's Adj-In and Adj-Out |
| up-front here, rather than queueing such work. |
| Extensive comment added on the various bits of indexed data |
| that exist and how they need to be dealt with. |
| (bgp_clear_route) Update comment. |
| |
| 2006-12-12 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * bgp_nexthop.c: (bgp_connected_add, bgp_connected_delete) |
| Simplify logic by using new CONNECTED_PREFIX macro. |
| |
| 2006-12-07 Paul Jakma <paul.jakma@sun.com> |
| |
| * bgp_fsm.c: Bug #302 fix, diagnosis, suggestions and testing |
| by Juergen Kammer <j.kammer@eurodata.de>. Fix follows from |
| his suggested fix, just made in a slightly different way. |
| (bgp_event) Transitions into Clearing always must call |
| bgp_clear_route_all(). |
| (bgp_stop) No need to clear routes here, BGP FSM should do |
| it. |
| |
| 2006-11-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * bgp_debug.h: Declare new bgp_debug_zebra conf and term flags, |
| and define BGP_DEBUG_ZEBRA. |
| * bgp_debug.c: Declare conf_bgp_debug_zebra and term_bgp_debug_zebra. |
| (debug_bgp_zebra, no_debug_bgp_zebra, undebug_bgp_zebra) New |
| functions to enable/disable bgp zebra debugging. |
| (no_debug_bgp_all) Turn off zebra debugging. |
| (show_debugging_bgp) Show whether zebra debugging is on. |
| (bgp_config_write_debug) Add 'debug bgp zebra' if configured. |
| (bgp_debug_init) Add new zebra debugging commands. |
| * bgp_zebra.c: (bgp_router_id_update, bgp_interface_add, |
| bgp_interface_delete, bgp_interface_up, bgp_interface_down, |
| bgp_interface_address_add, bgp_interface_address_delete, |
| zebra_read_ipv4, zebra_read_ipv6, bgp_zebra_announce, |
| bgp_zebra_withdraw, bgp_redistribute_set, bgp_redistribute_unset) |
| If zebra debugging is enabled, log an appropriate debug message. |
| |
| 2006-11-28 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * bgp_route.c: (bgp_info_restore) New function that undoes |
| the effects of a previous call to bgp_info_delete. This is |
| used when a route is deleted and quickly re-added before the |
| deletion has been processed. |
| (bgp_static_update_rsclient, bgp_static_update_main, |
| bgp_redistribute_add) Check whether a pre-existing route |
| has the BGP_INFO_REMOVED set, and, if so, we need to call |
| bgp_info_restore to resurrect it. |
| |
| 2006-10-27 Paul Jakma <paul.jakma@sun.com> |
| |
| * bgp_route.c: (bgp_table_stats) oops, u_intXX_t should be |
| uintXX_t |
| |
| 2006-10-19 Paul Jakma <paul.jakma@sun.com> |
| |
| * bgpd.c: (peer_new) bgp element of peer absolutely must be |
| filled in, make peer_new() require it as argument and update |
| all callers. Fixes a crash reported by Jan 'yanek' Bortl and |
| Andrew Schorr where bgpd would crash in bgp_pcount_adjust |
| trying to dereference the bgp member of bgp->peer_self, |
| triggered through redistribution. |
| * bgp_route.c: (bgp_pcount_adjust) assert sanity of arguments. |
| |
| 2006-10-15 Paul Jakma <paul.jakma@sun.com> |
| |
| * bgp_route.c: (bgp_table_stats_walker) NULL deref if table is |
| empty, bgp_table_top may return NULL, Coverity CID#73. |
| * bgp_packet.c: (bgp_update_packet) adv->rn can not be NULL, |
| check is bogus - changed to assert(), CID#64. |
| binfo is checked for NULL, but then dereferenced |
| unconditionally, fix, CID #63. |
| (bgp_withdraw_packet) Assert adv->rn is valid, as with |
| bgp_update_packet(). |
| |
| 2006-10-14 Paul Jakma <paul.jakma@sun.com> |
| |
| * bgp_fsm.h: Remove BGP_EVENT_FLUSH_ADD, dangerous and not |
| needed. |
| * bgp_fsm.c: (bgp_stop) Move BGP_EVENT_FLUSH to the top of the |
| of the function, otherwise it could flush a ClearingCompleted |
| event, bug #302. |
| * bgp_packet.c: Replace all BGP_EVENT_FLUSH_ADD with |
| BGP_EVENT_ADD, fixing bug #302. |
| |
| 2006-09-19 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * bgpd.c: (peer_uptime) Fix printf format/arg mismatch in |
| zlog_warn message (%ld/size_t -> %lu/u_long). |
| |
| 2006-09-14 Paul Jakma <paul.jakma@sun.com> |
| |
| * bgp_route.c: (bgp_table_stats_walker) Address space announced |
| should only count top-level unaggregateable prefixes, to |
| avoid falling afoul of anti-dodgy-accounting regulations |
| in various jurisdictions.. ;) |
| (bgp_process_queue_init) process queue hold time too high, |
| adds extra memory load. Change to be much lower, until such |
| time as it's made configurable. |
| |
| 2006-09-14 Paul Jakma <paul.jakma@sun.com> |
| |
| * (general) fix the peer refcount issue exposed by previous, by |
| just removing refcounting of peer threads, which is mostly |
| senseless as they're references leading from struct peer, |
| which peer_free cancels anyway. No need to muck around.. |
| * bgp_fsm.h: Just remove the refcounting from the various |
| TIMER/READ/WRITE/EVENT ON/OFF/ADD macros. |
| * bgp_fsm.c: (bgp_stop) use BGP_EVENT_FLUSH, no refcounts attached |
| to events anymore. |
| (bgp_event) remove peer_unlock, events not refcounted. |
| * bgpd.c: (peer_free) flush events before free. |
| |
| 2006-09-14 Paul Jakma <paul.jakma@sun.com> |
| |
| * (general) Fix some niggly issues around 'shutdown' and clearing |
| by adding a Clearing FSM wait-state and a hidden 'Deleted' |
| FSM state, to allow deleted peers to 'cool off' and hit 0 |
| references. This introduces a slow memory leak of struct peer, |
| however that's more a testament to the fragility of the |
| reference counting than a bug in this patch, cleanup of |
| reference counting to fix this is to follow. |
| * bgpd.h: Add Clearing, Deleted states and Clearing_Completed |
| and event. |
| * bgp_debug.c: (bgp_status_msg[]) Add strings for Clearing and |
| Deleted. |
| * bgp_fsm.h: Don't allow timer/event threads to set anything |
| for Deleted peers. |
| * bgp_fsm.c: (bgp_timer_set) Add Clearing and Deleted. Deleted |
| needs to stop everything. |
| (bgp_stop) Remove explicit fsm_change_status call, the |
| general framework handles the transition. |
| (bgp_start) Log a warning if a start is attempted on a peer |
| that should stay down, trying to start a peer. |
| (struct .. FSM) Add Clearing_Completed |
| events, has little influence except when in state |
| Clearing to signal wait-state can end. |
| Add Clearing and Deleted states, former is a wait-state, |
| latter is a placeholder state to allow peers to disappear |
| quietly once refcounts settle. |
| (bgp_event) Try reduce verbosity of FSM state-change debug, |
| changes to same state are not interesting (Established->Established) |
| Allow NULL action functions in FSM. |
| * bgp_packet.c: (bgp_write) Use FSM events, rather than trying |
| to twiddle directly with FSM state behind the back of FSM. |
| (bgp_write_notify) ditto. |
| (bgp_read) Remove the vague ACCEPT_PEER peer_unlock, or else |
| this patch crashes, now it leaks instead. |
| * bgp_route.c: (bgp_clear_node_complete) Clearing_Completed |
| event, to end clearing. |
| (bgp_clear_route) See extensive comments. |
| * bgpd.c: (peer_free) should only be called while in Deleted, |
| peer refcounting controls when peer_free is called. |
| bgp_sync_delete should be here, not in peer_delete. |
| (peer_delete) Initiate delete. |
| Transition to Deleted state manually. |
| When removing peer from indices that provide visibility of it, |
| take great care to be idempotent wrt the reference counting |
| of struct peer through those indices. |
| Use bgp_timer_set, rather than replicating. |
| Call to bgp_sync_delete isn't appropriate here, sync can be |
| referenced while shutting down and finishing deletion. |
| (peer_group_bind) Take care to be idempotent wrt list references |
| indexing peers. |
| |
| 2006-09-13 Paul Jakma <paul.jakma@sun.com> |
| |
| * bgp_aspath.c: (aspath_highest) new, return highest ASN in an |
| aspath. |
| * bgp_route.c: (bgp_peer_count_walker) new, do the walk done |
| in bgp_peer_counts as a thread. |
| (bgp_peer_counts) move walk to previous and call it via |
| thread_execute so this RIB walk shows up in thread stats. |
| (bgp_table_stats) New, gather some statistics for a given |
| RIB. |
| (bgp_table_stats_walker) New, RIB walker thread for former. |
| (bgp_table_stats_vty) Parsing front-end for 'show bgp ...', |
| useful model for future rationalisation of 'show ... bgp'. |
| (bgp_route_init) Add new RIB stats commands. |
| |
| 2006-09-06 Paul Jakma <paul.jakma@sun.com> |
| |
| * (general) Squash any and all prefix-count issues by |
| abstracting route flag changes, and maintaining count as and |
| when flags are modified (rather than relying on explicit |
| modifications of count being sprinkled in just the right |
| places throughout the code). |
| * bgp_route.c: (bgp_pcount_{dec,inc}rement) removed. |
| (bgp_pcount_adjust) new, update prefix count as |
| needed for a given route. |
| (bgp_info_{uns,s}et_flag) set/unset a BGP_INFO route status |
| flag, calling previous function when appropriate. |
| (general) Update all set/unsets of flags to use previous. |
| Remove pcount_{dec,inc}rement calls. |
| No need to unset BGP_INFO_VALID in places where |
| bgp_info_delete is called, it does that anyway. |
| * bgp_{damp,nexthop}.c: Update to use bgp_info_{un,}set_flag. |
| * bgp_route.h: Export bgp_info_{un,}set_flag. |
| Add a 'meta' BGP_INFO flag, BGP_INFO_UNUSEABLE. |
| Move BGP_INFO_HOLDDOWN macro to here from bgpd.h |
| |
| 2006-09-03 Paul Jakma <paul.jakma@sun.com> |
| |
| * bgp_route.c: Add 'show ... bgp ... <neighbour> prefix-count' |
| commands, to provide detailed counts of prefixes for a peer. |
| Informative, and should help pin down to pfxcnt drift |
| problems. |
| |
| 2006-08-27 Paul Jakma <paul.jakma@sun.com> |
| |
| * bgp_advertise.c: (bgp_sync_delete) fix mtype in XFREE. |
| NULL out peer->hash after free, to be sure. |
| |
| 2006-08-06 Paul Jakma <paul.jakma@sun.com> |
| |
| * bgp_aspath.c: (aspath_loop_check) Fix the typo-bug which |
| essentially had disabled this check. Problem reported by |
| Bartek Kania <mrbk@gnarf.org> in [quagga-users 7388]. |
| |
| 2006-07-27 Paul Jakma <paul.jakma@sun.com> |
| |
| * bgpd.c: (peer_delete) Ensure freed buffers can not be |
| accidently reused. A potential fix for bug #287. |
| |
| 2006-07-02 Paul Jakma <paul.jakma@sun.com> |
| |
| * bgp_fsm.c: (bgp_{stop,start}) Move clear/free of certain |
| bits of state from stop to start, as they may be used via |
| peer references on clearing queues.. |
| |
| 2006-05-23 Paul Jakma <paul.jakma@sun.com> |
| |
| * bgp_vty.c: (neighbor_update_source_cmd) Expand tab completion |
| to make it clear it takes both address and ifname. |
| |
| 2006-05-12 Paul Jakma <paul.jakma@sun.com> |
| |
| * bgp_attr.c: (bgp_packet_attribute) Remove dead code, Coverity |
| CID #1 |
| * bgp_aspath.{c,h}: (aspath_print_vty) take a format string, |
| so as to reduce burden on callers, all in bgp_route.c |
| * bgp_route.c: (bgp_static_update_main) Remove useless NULL |
| check, code already assumes bgp_static can not be NULL, |
| fixes CID #7. |
| (bgp_static_update_rsclient) ditto, CID #6 |
| (route_vty_out{,tmp}) Update to match aspath_print_vty, |
| simplifying checks needed to get spacing right. CID #4,#5. |
| ({damp,flap}_route_vty_out) Ditto, CID #9, #10 |
| |
| 2006-05-08 Paul Jakma <paul.jakma@sun.com> |
| |
| * bgp_community.c: (community_str2com) Coverity CID#62, fix |
| double-free, use-after-free. |
| * bgp_route.c: (bgp_afi_node_get) given table should never be |
| NULL, check/assert this. |
| (bgp_static_update) Bug #240. Rsclients should only be passed |
| the static update if they are configured for the afi,safi. |
| |
| 2006-05-04 Paul Jakma <paul.jakma@sun.com> |
| |
| * (general) VPNv4 fixes. Certain VPNv4 code was not enabled. |
| See bug #210. |
| * bgp_attr.{c,h}: (bgp_packet_{withdraw,attribute}) Tag should be |
| u_char really. |
| * bgp_packet.c: (bgp_{update,withdraw}_packet) Enable some |
| VPNv4 code which inexplicably was ifdef'd out. comments from |
| a tester on IRC suggest this fixes bug #210. |
| * bgp_route.c: (general) Fix logical bug in clearing, noted |
| by Chris Caputo in [quagga-users 6728] - clearing depended on |
| at least one route being added to workqueue, in order for |
| workqueue completion function to restart FSM. However, if no |
| routes are cleared, then the completion function never is |
| called, it needs to be called manually if the workqueue |
| didn't get scheduled. |
| Finally, clearing is per-peer-session, not per AFI/SAFI, so |
| the FSM synchronisation should be in bgp_clear_route_table. |
| (bgp_clear_route_table) Wrong place for FSM/clearing |
| synchronisation, move to.. |
| (bgp_clear_route) FSM/clearing synchronisation should be |
| here. |
| If no routes were cleared, no workqueue scheduled, call |
| the completion func to ensure FSM kicks off again. |
| |
| 2006-03-30 Paul Jakma <paul.jakma@sun.com> |
| |
| * bgp_community.c: (community_gettoken) Unknown token should |
| return NULL, to give a strong indication to callers that |
| the token no longer can be parsed, otherwise callers looping |
| on this function may have a hard time ending their loop. |
| (community_str2com) While loop around community_gettoken appears |
| to have been coded thinking that break statement would break |
| from the while{}, hence it could never exit for unknown token |
| case. Fix it to do..while, so it can use the NULL result from |
| community_gettoken easily. |
| |
| 2006-03-22 Paul Jakma <paul.jakma@sun.com> |
| |
| * bgpd.c: (peer_free) release the per-peer workqueue when |
| freeing the peer. |
| |
| 2006-03-19 Paul Jakma <paul.jakma@sun.com> |
| |
| * bgpd/bgp_vty.c: Add includes to get several structs we want |
| to provide usage statistics on. |
| (show_bgp_memory_cmd) Show memory usage stats for various |
| notable fixed size objects. Using mtype_stats_alloc and |
| mtype_memstr recently added to memory.c. |
| (bgp_show_summary) Report some additional stats specific to |
| the given BGP instance and/or AFI/SAFI such as table counts, |
| peers, rsclients and peer-groups. |
| (bgp_vty_init) Install show_bgp_memory_cmd. |
| * bgp_nexthop.h: Include if.h as a dependent header, for struct |
| connected. |
| * bgp_advertise.c: Use a distinct memory type for struct |
| bgp_synchronize. |
| |
| 2006-03-12 Paul Jakma <paul.jakma@sun.com> |
| |
| * bgp_attr.h: (struct attr) rearrange fields to avoid |
| wasted padding between them as much as possible. |
| (attr_count,attr_unknown_count) export new functions to |
| return number of counts of cached attributes. |
| * bgp_attr.c: (attr_count,attr_unknown_count) new functions to |
| return number of counts of cached attributes. |
| * bgp_route.h: (struct bgp_info) rearrange fields to avoid |
| wasted padding. |
| * bgp_table.h: (struct bgp_table) Add a count field, of number |
| of nodes in the table. |
| (struct bgp_node) rearrange fields to avoid |
| wasted padding between them, though I don't think there |
| was any in this case. |
| * bgp_table.c: (bgp_node_{delete,get}) Maintain the table node count. |
| (bgp_table_count) new function to access the table count. |
| |
| 2006-03-03 Paul Jakma <paul.jakma@sun.com> |
| |
| * bgp_route.c: (bgp_clear_node_complete) Doh. When clearing |
| is complete we need to kick off FSM again. |
| |
| 2006-02-21 Paul Jakma <paul.jakma@sun.com> |
| |
| * bgpd.h: move the clear_node_queue to be peer specific. |
| Add a new peer status flag, PEER_STATUS_CLEARING. |
| * bgp_table.h: (struct bgp_table) Add fields to record afi, |
| safi of the table. |
| (bgp_table_init) Take afi and safi to create table for. |
| * bgp_table.c: (bgp_table_init) record the afi and safi. |
| * bgp_nexthop.c: Update all calls to bgp_table_init. |
| * bgp_vty.c: ditto. |
| * bgpd.c: ditto. |
| * bgp_fsm.c: (bgp_timer_set) dont bring up a session which is |
| clearing. |
| * bgp_route.c: (general) Update all bgp_table_init calls. |
| (bgp_process_{rsclient,main}) clear_node is serialised |
| via PEER_STATUS_CLEARING and fsm now. |
| (struct bgp_clear_node_queue) can be removed. struct bgp_node |
| can be the queue item data directly, as struct peer can be |
| kept in the new wq global user data and afi/safi can be |
| retrieved via bgp_node -> bgp_table. |
| (bgp_clear_route_node) fix to get peer via wq->spec.data, |
| afi/safi via bgp_node->bgp_table. |
| (bgp_clear_node_queue_del) no more item data to delete, only |
| unlock the bgp_node. |
| (bgp_clear_node_complete) only need to unset CLEARING flag |
| and unlock struct peer. |
| (bgp_clear_node_queue_init) queue attaches to struct peer |
| now. record peer name as queue name. |
| (bgp_clear_route_table) If queue transitions to active, |
| serialise clearing by setting PEER_STATUS_CLEARING rather |
| than plugging process queue, and lock peer while queue |
| active. |
| Update to pass only bgp_node as per-queue-item specific data. |
| * bgp_vty.c: (bgp_show_summary) Add a 'Clrng' sub-description |
| to state of peer while it's suppressed due to clearing. |
| |
| 2006-02-18 Paul Jakma <paul.jakma@sun.com> |
| |
| * bgp_routemap.c: (route_set_community) Quick, very hacky, fix |
| for the set-community leak, bug #89. True fix will be to |
| detangle the web of *_intern caching and provide saner object |
| caching for Quagga, future work. |
| * bgp_route.c: (bgp_announce_check) trivial, move declaration |
| of two local variables into the only block where they are |
| used, to aid the reader. |
| |
| 2006-02-05 Paul Jakma <paul.jakma@sun.com> |
| |
| * bgp_route.h: Add BGP_INFO_COUNTED to track whether |
| prefix has been counted or not. |
| * bgp_route.c: (bgp_pcount_{inc,dec}rement) new helpers, to |
| centralise inc/dec of prefix-count, |
| (bgp_rib_remove) Remove pcount decrement, use helper. |
| (bgp_rib_withdraw) ditto, additionally use previous function |
| too. |
| (bgp_update_main) Use pcount helpers. |
| (bgp_clear_route_node) ditto, aslo REMOVED routes don't need |
| clearing. |
| * bgp_aspath.c: (aspath_gettoken) fix gcc warning about |
| possible uninitialised usage. |
| |
| 2006-02-02 Paul Jakma <paul.jakma@sun.com> |
| |
| * bgp_route.c: (bgp_{clear_node,process}_queue_init) delay |
| field is removed from workqueue spec. |
| |
| 2006-01-19 Paul Jakma <paul.jakma@sun.com> |
| |
| * (general) various miscellaneous compiler warning fixes. |
| Remove redundant break statements from switch clauses |
| which return. |
| return from main, not exit, cause it annoys SOS. |
| Remove stray semi-colons which cause empty-statement |
| warnings. |
| |
| 2006-01-17 Paul Jakma <paul.jakma@sun.com> |
| |
| * bgp_nexthop.c: (zlookup_read*) convert to new Zserv format. |
| (zlookup_query_ipv6) ditto. |
| (bgp_import_check) ditto. |
| |
| 2006-01-16 Paul Jakma <paul.jakma@sun.com> |
| |
| * bgp_aspath.c: (assegment_append_asns) XREALLOC can return |
| NULL theoretically, take care not to lose the allocated data. |
| (aspath_hash_alloc) aspath_dup already set the aspath |
| string - fix leak. |
| (aspath_parse) aspath_hash_alloc dupes the entire aspath, |
| including segments, but we forgot to free the temporary |
| assegment. |
| (aspath_snmp_pathseg) move the static stream pointer out to |
| file scope, so it can be freed. |
| (aspath_finish) new function, free aspath resources. |
| * bgp_aspath.h: (aspath_finish) export. |
| |
| 2006-01-10 Juris Kalnins <juris@mt.lv> |
| |
| * bgpd.h: (bgp_router_id_unset) ex-function, remove. |
| |
| 2005-11-23 Paul Jakma <paul.jakma@sun.com> |
| |
| * bgp_aspath.c: (assegments_parse) should be static |
| |
| 2005-11-23 Juergen Kammer <j.kammer@eurodata.de> |
| |
| * bgp_aspath.c: (aspath_cmp_left_confed) fix SEGV for case |
| where one or both paths are empty. |
| |
| 2005-11-14 Paul Jakma <paul.jakma@sun.com> |
| |
| * bgp_route.c: (bgp_process_rsclient)Â convert to new workqueue |
| specs and shut up gcc, which complains about cast from void |
| via function parameters, for some dumb reason. Do the cast |
| inside the function instead. |
| (bgp_process_main,bgp_processq_del) ditto. |
| (bgp_clear_route_node) ditto. |
| (bgp_clear_node_queue_del) ditto. |
| |
| 2005-11-03 Paul Jakma <paul.jakma@sun.com> |
| |
| * bgp_damp.c: (bgp_reuse_timer) struct bgp can be retrieved via |
| the struct bgp_damp_info, no need to guess by using |
| bgp_get_default(). |
| |
| 2005-10-01 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * bgp_vty.c: (bgp_config_write_redistribute) Use new library function |
| zebra_route_string instead of a local hard-coded table. |
| |
| 2005-09-30 Vincent Jardin <vincent.jardin@6wind.com> |
| |
| * bgp_packet.c: fix compilation when DEBUG is used. |
| |
| 2005-09-10 Paul Jakma <paul.jakma@sun.com> |
| |
| * Makefile.am: bgpd shouldn't list libgp's sources as its own. |
| Use LDADD. |
| * bgp_aspath.h: |
| (struct assegment) New struct, abstract representation of a |
| list of AS_PATH segments and the contained ASNs. |
| (struct aspath) Remove the raw-data related |
| fields, reference the abstract struct assegment instead. |
| Remove several other computed fields, it's just a |
| headache to maintain them and they're cheap to compute from |
| struct assegment. |
| (aspath_parse) parse a stream, not a pointer to raw data. |
| (aspath_count_{hops,confeds,size}) helpers to access |
| information formerly directly contained in struct aspath. |
| (aspath_snmp_pathseg) Helper for SNMP, BGP MIB wants |
| to be able to output hex representation of raw data. |
| * bgp_aspath.c: (general) partial-rewrite. Store aspath data |
| as an abstract singly-linked list of abstract segments, |
| rather than storing the raw data, and parsing it each and |
| every time. Remove several count/size fields which are cheap |
| to compute from the abstract segment structure. |
| (global) Include stream.h, needed for aspath_parse, and |
| others. Couple of helper macros added. |
| (struct assegment_header) Just the header, and only the |
| header. |
| (assegment_data_{new,free}) convenience functions for |
| AS_SEG_DATA allocation, the dynamic, per-segment array of |
| ASNs. |
| (assegment_{new,free,free_all,dup,dup_all}) convenience |
| functions for creating struct assegments. The _all forms will |
| follow the entire chain of segments from the given segment. |
| (assegment_prepend_asns) new function, prepend an ASN N times |
| to segment. |
| (assegment_append_asns) Append a list (array) of ASNs to |
| segment. |
| (int_cmp) convenience function for the aspath hash. |
| (assegment_normalise) new function. Normalise the given |
| segment chain to meet expectations of Quagga, and to |
| eliminate differing raw representations of the same paths. |
| Merge 'runs' of SEQUENCEs into one segment as our internal |
| segment is not limited by the protocol AS_PATH segment |
| length. Sort ASNs in SETs. |
| (aspath_new) Take void argument to quell warnings. Use the |
| assegment convenience functions. |
| (assegment_count_{asns,confeds,hops}) new functions to |
| compute at runtime values previously held in struct aspath. |
| (aspath_size) ditto. |
| (aspath_make_str_count) rewritten to stringify new |
| representation, and to be slightly easier to understand |
| hopefully. |
| (aspath_str_update) convenience function, update the aspath |
| str. Should investigate removing maintained string from |
| struct aspath, just run-time compute it, as per other fields. |
| It's just a maintenance headache, would save noticeable |
| amount of RAM with possibly not much extra run-time cost. |
| (aspath_dup) use the assegment dup functions. |
| (aspath_hash_alloc) Take void * argument to satisfy gcc. Use |
| the proper helper functions to dup data. |
| (assegments_parse) new function. parse raw AS_PATH data into |
| struct assegments. Normalise and return the head of the list. |
| (aspath_parse) Parse a stream, not pointer to raw data and |
| use assegments_parse to do it. |
| (assegment_data_put) Write out a single segment data in protocol |
| form to stream. |
| (assegment_header_put) ditto but for segment header. |
| (aspath_put) new function. As per previous but for an entire |
| struct aspath. |
| (aspath_snmp_pathseg) wrapper around aspath_put for |
| bgp_snmp.c. Uses a static buffer sadly. |
| (aspath_aggregate_as_set_add) rewritten to use assegments. |
| (aspath_aggregate) ditto |
| (aspath_{firstas,loop,private_as}_check) ditto |
| (aspath_{merge,prepend,add_one_as}) ditto |
| (aspath_cmp_left{_confed}) ditto |
| (aspath_delete_confed_seq) ditto, plus fixed to properly |
| delete all leading confed segments. |
| (aspath_as_add) Just use assegment_append_asns. |
| (aspath_segment_add) updated to use assegments. |
| (enum as_token) Add values for confeds |
| (aspath_gettoken) Add support for confeds |
| (aspath_str2aspath) ditto |
| (aspath_key_make) updated to use as_segments. Also, add |
| segment type into the hash value as appropriate. |
| (aspath_cmp) updated to use as_segments. |
| (aspath_print) don't segfault on NULL argument. |
| * bgp_attr.c: (bgp_attr_aspath) aspath_parse wants the stream |
| now. No need for manual forwarding of stream. |
| (bgp_packet_attribute) empty aspath is now denoted by NULL |
| segment field, length is gone. |
| Use aspath_size() to determine size. |
| (bgp_attr_init) Fix declaration, explicitely specify void |
| arg. |
| (bgp_dump_routes_attr) Use aspath_size() to determine size. |
| * bgp_route.c: (bgp_info_cmp) use the aspath_count_* functions. |
| (bgp_rib_withdraw) remove unused variable. Use |
| aspath_count_hops. |
| * bgp_snmp.c: (bgp4PathAttrTable) raw data is gone, use |
| aspath_snmp_pathseg to get the representation. |
| |
| 2005-09-10 Paul Jakma <paul.jakma@sun.com> |
| |
| * bgp_vty.c: (bgp_vty_init) gcc 4 compile fix. static |
| function declarations shouldn't be inside functions. |
| * bgp_dump.c: (bgp_dump_interval_add) ditto. |
| |
| 2005-08-26 Hasso Tepper <hasso at quagga.net> |
| |
| * bgp_route.c: Third (?) attempt to fix best selection breakage |
| introduced long time ago with route server patch. Hopefully |
| it's last case to fix - route-server client not in peer group. |
| |
| 2005-08-22 Hugo Santos <hsantos@av.it.pt> |
| |
| * bgp_vty.c: (general) Add support for BGP IPv6 Multicast SAFI |
| commands and BGP_IPV6M_NODE. |
| |
| 2005-08-22 Paul Jakma <paul.jakma@sun.com> |
| |
| * bgp_route.h: (struct bgp_info) add a new flag, BGP_INFO_REMOVED. |
| BGP_INFO_VALID is already overloaded, don't care to do same thing |
| to STALE or HISTORY. |
| * bgpd.h: (BGP_INFO_HOLDDOWN) Add INFO_REMOVED to the macro, as a |
| route which should generally be ignored. |
| * bgp_route.c: (bgp_info_delete) Just set the REMOVE flag, rather |
| than doing actual work, so that bgp_process (called directly, |
| or indirectly via the scanner) can catch withdrawn routes. |
| (bgp_info_reap) Actually remove the route, what bgp_info_delete |
| used to do, only for use by bgp_process. |
| (bgp_best_selection) reap any REMOVED routes, other than the old |
| selected route. |
| (bgp_process_rsclient) reap the old-selected route, if appropriate |
| (bgp_process_main) ditto |
| (bgp_rib_withdraw, bgp_rib_remove) make them more consistent with |
| each other. Don't play games with the VALID flag, bgp_process |
| is async now, so it didn't make a difference anyway. |
| Remove the 'force' argument from bgp_rib_withdraw, withdraw+force |
| is equivalent to bgp_rib_remove. Update all its callers. |
| (bgp_update_rsclient) bgp_rib_withdraw and force set is same as |
| bgp_rib_remove. |
| (route_vty_short_status_out) new helper to print the leading |
| route-status string used in many command outputs. Consolidate. |
| (route_vty_out, route_vty_out_tag, damp_route_vty_out, |
| flap_route_vty_out) use route_vty_short_status_out rather than |
| duplicate. |
| (route_vty_out_detail) print state of REMOVED flag. |
| (BGP_SHOW_SCODE_HEADER) update for Removed flag. |
| |
| 2005-08-03 Hasso Tepper <hasso at quagga.net> |
| |
| * bgp_routemap.c: Revert part of leaking communities fix commited in |
| 2005-05-27. While ecommunity fix seems to be correct, community case |
| isn't. |
| |
| 2005-06-28 Paul Jakma <paul.jakma@sun.com> |
| |
| * (global) The great bgpd extern and static'ification. |
| * bgp_routemap.c: remove unused ROUTE_MATCH_ASPATH_OLD code |
| (route_set_metric_compile) fix u_int32_t to ULONG_MAX comparison |
| warnings. |
| * bgp_route.h: (bgp_process, bgp_withdraw, bgp_update) export these |
| used by various files which had their own private declarations, |
| in the case of mplsvpn - incorrect. |
| |
| 2005-06-15 Paul Jakma <paul.jakma@sun.com> |
| |
| * bgpd.c: (bgp_terminate) workqueue's are lazy allocated and its |
| possible to terminate bgpd before workqueues were setup, causing |
| an abort/crash. Reported by Ashish Mehta of Sun. |
| |
| 2005-06-01 Paul Jakma <paul.jakma@sun.com> |
| |
| * (general) refcount struct peer and bgp_info, hence allowing us |
| add work_queues for bgp_process. |
| * bgp_route.h: (struct bgp_info) Add 'lock' field for refcount. |
| Add bgp_info_{lock,unlock} helper functions. |
| Add bgp_info_{add,delete} helpers, to remove need for |
| users managing locking/freeing of bgp_info and bgp_node's. |
| * bgp_table.h: (struct bgp_node) Add a flags field, and |
| BGP_NODE_PROCESS_SCHEDULED to merge redundant processing of |
| nodes. |
| * bgp_fsm.h: Make the ON/OFF/ADD/REMOVE macros lock and unlock |
| peer reference as appropriate. |
| * bgp_damp.c: Remove its internal prototypes for |
| bgp_info_delete/free. Just use bgp_info_delete. |
| * bgpd.h: (struct bgp_master) Add work_queue pointers. |
| (struct peer) Add reference count 'lock' |
| (peer_lock,peer_unlock) New helpers to take/release reference |
| on struct peer. |
| * bgp_advertise.c: (general) Add peer and bgp_info refcounting |
| and balance how references are taken and released. |
| (bgp_advertise_free) release bgp_info reference, if appropriate |
| (bgp_adj_out_free) unlock peer |
| (bgp_advertise_clean) leave the adv references alone, or else |
| call bgp_advertise_free cant unlock them. |
| (bgp_adj_out_set) lock the peer on new adj's, leave the reference |
| alone otherwise. lock the new bgp_info reference. |
| (bgp_adj_in_set) lock the peer reference |
| (bgp_adj_in_remove) and unlock it here |
| (bgp_sync_delete) make hash_free on peer conditional, just in |
| case. |
| * bgp_fsm.c: (general) document that the timers depend on |
| bgp_event to release a peer reference. |
| (bgp_fsm_change_status) moved up the file, unchanged. |
| (bgp_stop) Decrement peer lock as many times as cancel_event |
| canceled - shouldnt be needed but just in case. |
| stream_fifo_clean of obuf made conditional, just in case. |
| (bgp_event) always unlock the peer, regardless of return value |
| of bgp_fsm_change_status. |
| * bgp_packet.c: (general) change several bgp_stop's to BGP_EVENT's. |
| (bgp_read) Add a mysterious extra peer_unlock for ACCEPT_PEERs |
| along with a comment on it. |
| * bgp_route.c: (general) Add refcounting of bgp_info, cleanup |
| some of the resource management around bgp_info. Refcount peer. |
| Add workqueues for bgp_process and clear_table. |
| (bgp_info_new) make static |
| (bgp_info_free) Ditto, and unlock the peer reference. |
| (bgp_info_lock,bgp_info_unlock) new exported functions |
| (bgp_info_add) Add a bgp_info to a bgp_node in correct fashion, |
| taking care of reference counts. |
| (bgp_info_delete) do the opposite of bgp_info_add. |
| (bgp_process_rsclient) Converted into a work_queue work function. |
| (bgp_process_main) ditto. |
| (bgp_processq_del) process work queue item deconstructor |
| (bgp_process_queue_init) process work queue init |
| (bgp_process) call init function if required, set up queue item |
| and add to queue, rather than calling process functions directly. |
| (bgp_rib_remove) let bgp_info_delete manage bgp_info refcounts |
| (bgp_rib_withdraw) ditto |
| (bgp_update_rsclient) let bgp_info_add manage refcounts |
| (bgp_update_main) ditto |
| (bgp_clear_route_node) clear_node_queue work function, does |
| per-node aspects of what bgp_clear_route_table did previously |
| (bgp_clear_node_queue_del) clear_node_queue item delete function |
| (bgp_clear_node_complete) clear_node_queue completion function, |
| it unplugs the process queues, which have to be blocked while |
| clear_node_queue is being processed to prevent a race. |
| (bgp_clear_node_queue_init) init function for clear_node_queue |
| work queues |
| (bgp_clear_route_table) Sets up items onto a workqueue now, rather |
| than clearing each node directly. Plugs both process queues to |
| avoid potential race. |
| (bgp_static_withdraw_rsclient) let bgp_info_{add,delete} manage |
| bgp_info refcounts. |
| (bgp_static_update_rsclient) ditto |
| (bgp_static_update_main) ditto |
| (bgp_static_update_vpnv4) ditto, remove unneeded cast. |
| (bgp_static_withdraw) see bgp_static_withdraw_rsclient |
| (bgp_static_withdraw_vpnv4) ditto |
| (bgp_aggregate_{route,add,delete}) ditto |
| (bgp_redistribute_{add,delete,withdraw}) ditto |
| * bgp_vty.c: (peer_rsclient_set_vty) lock rsclient list peer |
| reference |
| (peer_rsclient_unset_vty) ditto, but unlock same reference |
| * bgpd.c: (peer_free) handle frees of info to be kept for lifetime |
| of struct peer. |
| (peer_lock,peer_unlock) peer refcount helpers |
| (peer_new) add initial refcounts |
| (peer_create,peer_create_accept) lock peer as appropriate |
| (peer_delete) unlock as appropriate, move out some free's to |
| peer_free. |
| (peer_group_bind,peer_group_unbind) peer refcounting as |
| appropriate. |
| (bgp_create) check CALLOC return value. |
| (bgp_terminate) free workqueues too. |
| |
| 2005-05-28 Hasso Tepper <hasso at quagga.net> |
| |
| * bgp_routemap.c: Sync set_metric_addsub_cmd with ripd. |
| |
| 2005-05-27 Hasso Tepper <hasso at quagga.net> |
| |
| * bgp_routemap.c: Stop leaking communities. |
| |
| 2005-05-27 Hasso Tepper <hasso at quagga.net> |
| |
| * bgpd.c: Deleting bgp->rsclient list needs fix similar to pree-groups |
| deleting fix. Avoid leaking bgp->group, bgp->peer and bgp->rsclient |
| lists. |
| |
| 2005-05-26 Hasso Tepper <hasso at quagga.net> |
| |
| * bgpd.c: Don't crash while deleting list of peer-groups. |
| |
| 2005-05-25 Hasso Tepper <hasso at quagga.net> |
| |
| * bgpd.c: Fix obvious (routeserver patch) merge error. This makes "no |
| neighbor x.x.x.x routemap [export|import] commands work again. |
| |
| 2005-05-23 Paul Jakma <paul@dishone.st> |
| |
| * bgp_routemap.c: add semi-colons to VTY_GET_* to match vty.h change |
| * bgp_fsm.h: Add extern qualifier to exported functions |
| * bgp_nexthop.c: add static to nexthop specific globals |
| * *.h: Add guard defines |
| |
| 2005-05-19 Paul Jakma <paul@dishone.st> |
| |
| * bgp_fsm.c: (bgp_stop) use sockunion_free, not XFREE.. |
| * bgp_network.c: (bgp_getsockname) ditto |
| (bgp_accept) use XSTRDUP |
| * bgp_routemap.c: (route_match_peer) ditto, als use a ret value and |
| remove one sockunion_free. |
| * bgpd.c: (peer_delete) ditto. |
| XFREE the correct memtype, not free. |
| (peer_create) use XSTRDUP |
| * bgp_packet.c: (bgp_stream_dup) deleted, stream_dup should be used |
| (various) update -> s/bgp_stream_dup/stream_dup |
| |
| |
| 2005-04-11 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * bgp_zebra.c (bgp_redistribute_set, bgp_redistribute_unset): |
| The 2nd arg to zebra_redistribute_send is now zclient instead of |
| zclient->sock. |
| |
| 2005-04-09 Akihiro Mizutani <mizutani@net-chef.net> |
| |
| * bgp_vty.c: Make "exit-address-family" work in IPv4 unicast address |
| family node. |
| |
| 2005-04-08 Martin Ling <martin-quagga@earth.li> |
| |
| * bgp_aspath.[ch], bgp_route.c, bgp_vty.c, bgpd.[ch]: Allow to enable |
| the length of confederation path segments to be included during the |
| as-path length check in the best path decision. |
| |
| 2005-04-02 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * bgp_zebra.c: (bgp_interface_delete) After deleting, set ifp->ifindex |
| to IFINDEX_INTERNAL. |
| |
| 2005-03-21 Hasso Tepper <hasso at quagga.net> |
| |
| * bgp_route.c: Don't crash while clearing route tables if there is |
| no particular afi/safi configured. |
| |
| 2005-02-23 Hasso Tepper <hasso at quagga.net> |
| |
| * bgp_route.c: Make reannouncing prefixes with changed attributes |
| work again. |
| |
| 2005-02-02 Akihiro Mizutani <mizutani@net-chef.net> |
| |
| * bgp_vty.c: Deprecate "neighbor transparent-as" and "neighbor |
| transparent-nexthop" commands. |
| |
| 2005-02-02 Akihiro Mizutani <mizutani@net-chef.net> |
| |
| * bgp_routemap.c: New route-map command - "match ip route-source". |
| |
| 2005-02-02 Akihiro Mizutani <mizutani@net-chef.net> |
| |
| * bgp_clist.[ch], bgp_route.c, bgp_routemap.c, bgp_vty.c: |
| community-list cleanup. |
| |
| 2005-02-02 Akihiro Mizutani <mizutani@net-chef.net> |
| |
| * bgp_route.c, bgp_vty.c, bgp_zebra.c, bgpd.[ch]: "enforce-multihop" |
| -> "disable-connected-check". |
| |
| 2005-02-02 Akihiro Mizutani <mizutani@net-chef.net> |
| |
| * bgp_fsm.c, bgp_open.c, bgp_packet.c, bgp_route.[ch], bgp_vty.c, |
| bgpd.[ch]: Add BGP_INFO_STALE flag and end-of-rib support. "bgp |
| graceful-restart" commands added. Show numbers of individual |
| messages in "show ip bgp neighbor" command. Final pieces of graceful |
| restart. |
| |
| 2005-02-01 Akihiro Mizutani <mizutani@net-chef.net> |
| |
| * bgp_open.c, bgp_packet.c, bgp_vty.c, bgpd.[ch]: Remove "no neighbor |
| capability route-refresh" commands. Route refresh capability is sent |
| anyway now. Preserve dummy deprecated commands. |
| |
| 2005-02-01 Akihiro Mizutani <mizutani@net-chef.net> |
| |
| * bgp_attr.c, bgp_snmp.c, bgp_vty.c, bgpd.[ch]: Remove support for old |
| draft - ie. "neighbor version 4-" commands. Preserve dummy "neighbor |
| version" command as deprecated. |
| |
| 2005-02-01 Akihiro Mizutani <mizutani@net-chef.net> |
| |
| * bgpd.[ch], bgp_vty.c, bgp_route.c: "Restart session after |
| maximum-prefix limit" feature support. |
| |
| 2005-02-01 Akihiro Mizutani <mizutani@net-chef.net> |
| |
| * bgp_nexthop.c: Improve debug. |
| * bgpd.[ch], bgp_nexthop.c, bgp_snmp.c: Remove useless bgp_get_master() |
| function. |
| * bgp_packet.c: MP AFI_IP update and withdraw parsing. |
| * bgp_fsm.c: Reset peer synctime in bgp_stop(). bgp_fsm_change_status() |
| is better place to log about peer status change than bgp_event(). |
| Log in bgp_connect_success(). |
| * bgp_vty.c: Fix typo in comment. |
| * bgp_attr.c: Better log about unknown attribute. |
| |
| 2005-01-29 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * bgp_filter.c: (ip_as_path,no_ip_as_path) Use argv_concat instead |
| of buffer_getstr. |
| * bgp_route.c: (bgp_show_regexp) Fix memory leak: need to free string |
| returned by buffer_getstr. |
| (bgp_show_community) Must use XFREE instead of free on string |
| returned by buffer_getstr. |
| * bgp_routemap.c: (set_community) Must use XFREE instead of free |
| on string returned by buffer_getstr. |
| * bgp_vty.c: (neighbor_description) Use argv_concat instead of |
| buffer_getstr. |
| |
| 2005-01-24 Hasso Tepper <hasso at quagga.net> |
| |
| * bgp_route.c: Fix showstopper bug. New route must be selected also |
| if old one is flaged as BGP_INFO_ATTR_CHANGED. |
| |
| 2005-01-17 Hasso Tepper <hasso at quagga.net> |
| |
| * bgp_route.c: Clear peer's routing table regardless whether it's |
| configured or not. Being not configured is even better reason to |
| do it. |
| |
| 2005-01-05 Paul Jakma <paul@dishone.st> |
| |
| * bgp_packet.c: (bgp_write) set socket to nonblock while writing |
| this should be generalised. See bugzilla #102. Fix supplied by |
| wawa@yandex-team.ru (Vladimir Ivanov). |
| |
| 2004-12-08 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * *.c: Change level of debug messages to LOG_DEBUG. |
| |
| 2004-12-07 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * bgp_main.c: (main) The 2nd argument to openzlog has been removed. |
| |
| 2004-12-03 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * bgp_main.c: (sigint) Use zlog_notice for termination message. |
| (main) Use zlog_notice for startup announcement. |
| |
| 2004-11-25 Hasso Tepper <hasso at quagga.net> |
| |
| * bgp_main.c: Make group to run as configurable. |
| |
| 2004-11-09 Paul Jakma <paul@dishone.st> |
| |
| * bgp_nexthop.c: collapse bgp_connected_ipvX, bgp_nexthop_cache_ipvX |
| and cache{1,2}.. into arrays of tables and hence collapse |
| bgp_scan_ipv{4,6} into a single bgp_scan function. Tested, though |
| a long time ago (and this change was hand-merged). |
| |
| 2004-11-04 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * bgp_route.c: Remove all code related to VTY_CONTINUE; this feature |
| is deprecated because the output did not represent a single point |
| in time. All output needs to be generated inline and buffered |
| by the library code. |
| (route_vty_out,route_vty_out_tag,damp_route_vty_out, |
| flap_route_vty_out) Remove code to count number of lines of output, |
| since this was only useful for VTY_CONTINUE behavior. |
| (bgp_show_callback,vty_calc_line) Removed. |
| (bgp_show_table) Remove hooks for VTY_CONTINUE callback support. |
| As a result, there's a new output_arg argument to this function. |
| Make function static. |
| (bgp_show) Make function static and add a new output_arg argument. |
| Change all functions that call bgp_show or bgp_show_table to |
| pass the new output_arg argument (that used to be passed inside |
| vty->output_arg). |
| * bgp_mplsvpn.c: Remove declarations of functions defined in |
| bgp_route.c; these declarations belong in bgp_route.h. |
| * bgp_route.h: Declare 3 global functions used in both bgp_route.c |
| and in bgp_mplsvpn.c. |
| |
| 2004-10-31 Paul Jakma <paul@dishone.st> |
| |
| * {bgpd,bgp_attr}.c: size_t printf format should be ld. |
| |
| 2004-10-25 Paul Jakma <paul@dishone.st> |
| |
| * Update with fix in debian bug id 222930. |
| * bgp_main.c: Add ZCAP_RAW, needed to bind to interfaces. |
| bgp_network.c: (....) raise/lower privs around call to |
| SO_BINDTODEVICE sockopt. |
| |
| 2004-10-19 Andrew J. Schorr <aschorr@telemetry-investments.com> |
| |
| * bgp_nexthop.c: (bgp_connected_add) Connected destination pointer |
| may be NULL. |
| (bgp_connected_delete) ditto. |
| |
| 2004-10-14 Hasso Tepper <hasso at quagga.net> |
| |
| * bgp_dump.c: Make dump configuration appear in vtysh. |
| |
| 2004-10-13 Hasso Tepper <hasso at quagga.net> |
| |
| * bgp_snmp.c: Remove defaults used to initialize smux connection to |
| snmpd. Connection is initialized only if smux peer is configured. |
| * bgp_view.c: It's dead file. Reomved. |
| |
| 2004-10-13 Paul Jakma <paul@dishone.st> |
| |
| * (global) more const'ification and fixups of types to clean up code. |
| * bgp_mplsvpn.{c,h}: (str2tag) fix abuse. Still not perfect, |
| should use something like the VTY_GET_INTEGER macro, but without |
| the vty_out bits.. |
| * bgp_routemap.c: (set_aggregator_as) use VTY_GET_INTEGER_RANGE |
| (no_set_aggregator_as) ditto. |
| * bgpd.c: (peer_uptime) fix unlikely bug, where no buffer is |
| returned, add comments about troublesome return value. |
| |
| 2004-10-03 James R. Leu <jleu at mindspring.com> |
| |
| * bgp_vty.c: Router id from zebra can be manually overriden. |
| * bgp_zebra.c: Read router id related messages from zebra daemon. |
| Remove own code related with router id selection. |
| * bgpd.c, bgpd.h: Remove own router id selection code. Use the one |
| from zebra daemon if it isn't manually overriden. |
| |
| 2004-09-26 Hasso Tepper <hasso at quagga.net> |
| |
| * bgp_aspath.c, bgp_packet.c, bgp_vty.c: Fix compiler warnings. |
| |
| 2004-09-23 Hasso Tepper <hasso at quagga.net> |
| |
| * *.[c|h]: list -> struct list *, listnode -> struct listnode *. |
| |
| 2004-07-09 Paul Jakma <paul@dishone.st> |
| |
| * Merge of GNU Zebra cvs2svn changesets r799, r800 and r807. |
| * bgp_dump.c: (bgp_dump_attr) cleanup. return status code. check |
| attributes present before printing. |
| * bgp_dump.c: update bgp_dump_attr prototype. |
| * bgp_packet.c: (bgp_update_receive) init attrstr. check status |
| of bgp_dump_attr. Log end-of-rib UPDATEs. |
| |
| 2004-07-09 Sowmini Varadhan <sowmini.varadhan@sun.com> |
| |
| * bgp_packet.c: (bgp_collision_detect) Send NOTIFY on new socket |
| if that is connection we're closing. |
| (bgp_read) invalid marker check applies to KEEPALIVE too. |
| * bgp_route.c: Ignore multicast NRLI, dont send NOTIFY. |
| |
| 2004-06-04 Paul Jakma <paul@dishone.st> |
| |
| * type mismatch fixes |
| |
| 2004-05-21 Akihiro Mizutani <mizutani@net-chef.net> |
| |
| * bgpd.h, bgp_open.[ch], bgp_debug.c, bgp_vty.[ch], bgp_fsm.c: |
| Graceful restart capability display. |
| |
| 2005-05-20 Kunihiro Ishiguro <kunihiro@ipinfusion.com> |
| |
| * bgp_debug.c: Cosmetical fixes and log neighbor changes. |
| |
| 2004-05-20 Akihiro Mizutani <mizutani@net-chef.net> |
| |
| * bgp_ecommunity.c: Transit ecommunity support. |
| * bgp_ecommunity.c: Fix for unknown community crush. |
| |
| 2005-05-20 Kunihiro Ishiguro <kunihiro@ipinfusion.com> |
| |
| * *: Maximum prefix threshold support. |
| * *: Reset notification fixups. |
| |
| 2004-05-08 Paul Jakma <paul@dishone.st> |
| |
| * bgp_zebra.c: (bgp_interface_address_add) sync to zclient changes |
| (bgp_interface_address_delete) ditto. |
| (bgp_zebra_announce) ditto. |
| (bgp_zebra_withdraw) ditto. |
| |
| 2004-05-03 Daniel Roesen <dr@cluenet.de> |
| |
| * bgp_fsm.c: (bgp_stop) Reset uptime only on transition from |
| Established so that it reflects true downtime (rather time |
| since last transition, eg Active->Idle) |
| |
| 2004-05-01 rivo nurges <rix@estpak.ee> |
| |
| * bgp_route.c: fix UNH IOL BGP-4.1.12f |
| |
| 2004-05-01 Paul Jakma <paul@dishone.st> |
| |
| * Revert the attempted clean-up of the dummy peer hack, reverts |
| patchsets 435 (see 2004-02-17 below) and 456. |
| |
| 2004-04-16 rivo nurges <rix@estpak.ee> |
| |
| * bgpd.h, bgp_debug.c: update cease subcodes to |
| draft-ietf-idr-cease-subcode-05 |
| * bgpd.h, bgpd.c, bgp_route.c, bgp_route.h: fix UNH IOL BGP-4.1.6a |
| |
| 2004-02-17 Paul Jakma <paul@dishone.st> |
| |
| * bgpd.h: (bgp_peer) add fd_local and fd_accept |
| file descriptor's, fd becomes a pointer to one of these. |
| * bgpd.c: (global) adjust for fact that fd is now a pointer. |
| (peer_create_accept) removed. |
| * bgp_route.c: (global) adjust for change of peer fd to pointer |
| * bgp_packet.c: (bgp_collision_detect) adjust and remove the |
| "replace with other peer" hack. |
| * bgp_network.c: (bgp_accept) Remove the dummy peer hack. |
| Update peer->fd_accept instead. |
| (global) Adjust fd references - now a pointer. |
| * bgp_fsm.c: (global) adjust peer fd to pointer. |
| (bgp_connection_stop) new function, to stop connection. |
| (global) adjust everything which closed peer fd to use |
| bgp_connection_stop(). |
| |
| 2003-12-23 Krzysztof Oledzki <oleq@ans.pl> |
| |
| * bgp_network.c: drop privs on error cases |
| |
| 2003-08-11 kunihiro <kunihiro@zebra.org> |
| |
| * bgp_route{,map}.c: Extend 'set ip next-hop' in route-maps with |
| ability to specify 'peer-address' rather than IP. |
| |
| 2003-06-09 Paul Jakma <paul@dishone.st> |
| |
| * bgp_clist.c (community_list_delete): honour deny statements |
| |
| 2003-04-19 Hasso Tepper <hasso@estpak.ee> |
| |
| * rip_routemap.c: sync daemon's route-map commands to have same |
| syntax |
| |
| 2003-01-09 Akihiro Mizutani <mizutani@net-chef.net> |
| |
| * bgp_routemap.c: Add match extcommunity command. |
| |
| 2002-10-23 Kunihiro Ishiguro <kunihiro@ipinfusion.com> |
| |
| * bgp_aspath.c (aspath_init): Extend hash size from default to |
| 32767. |
| (aspath_key_make): Use unsigned shoft for making hash. Suggested |
| by: Marc Evans <Marc@SoftwareHackery.Com> |
| |
| 2002-08-19 Kunihiro Ishiguro <kunihiro@ipinfusion.com> |
| |
| * bgp_clist.c (community_entry_free): Fix memory leak of standard |
| extcommunity-list config string. |
| |
| 2002-08-19 Akihiro Mizutani <mizutani@net-chef.net> |
| |
| * bgp_route.c (route_vty_out_detail): Fix bug of router-id display |
| when multiple instance is used. |
| |
| 2002-08-18 Akihiro Mizutani <mizutani@net-chef.net> |
| |
| * bgpd.c: Make "default-originate" and "maximum-prefix" commands |
| available in peer-group configuration. |
| |
| 2002-08-13 Akihiro Mizutani <mizutani@net-chef.net> |
| |
| * bgp_packet.c (bgp_open_send): Put Opt Parm Len 0 when last |
| capability packet cause error or dont-capability-negotiate option |
| is specified. |
| |
| 2002-07-07 Kunihiro Ishiguro <kunihiro@ipinfusion.com> |
| |
| * zebra-0.93 released. |
| |
| 2001-10-28 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgpd.c (bgp_vty_init): Translate update commands are removed. |
| |
| 2001-10-10 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_route.c (bgp_static_set): Add workaround for BGP static |
| route announcement when there is no zebra running. |
| |
| 2001-10-08 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgpd.c (neighbor_remote_as_unicast): Remove "remote-as nlri |
| unicast multicast" commands. |
| |
| 2001-09-14 Akihiro Mizutani <mizutani@dml.com> |
| |
| * bgp_open.c: When we receive capability route-refresh, we should |
| check we send the capability not we receive the capability. |
| |
| * bgp_route.c (bgp_network_mask_natural_route_map): network |
| statement route-map is added. |
| |
| 2001-08-31 Kunihiro Ishiguro <kunihiro@ipinfusion.com> |
| |
| * bgp_advertise.c (bgp_advertise_intern): attr must be interned |
| before looking up hash table. |
| |
| 2001-08-30 Kunihiro Ishiguro <kunihiro@ipinfusion.com> |
| |
| * bgpd.h (struct peer): BGP filter is moved from peer_conf to |
| peer. |
| |
| 2001-08-28 Kunihiro Ishiguro <kunihiro@ipinfusion.com> |
| |
| * bgp_nexthop.c (bnc_nexthop_free): Fix next pointer bug. |
| Suggested by: "Hong-Sung Kim" <hoskim@lanbird.co.kr>. |
| |
| 2001-08-26 Kunihiro Ishiguro <kunihiro@ipinfusion.com> |
| |
| * bgp_table.c (bgp_node_create): Clearn memory before use it. |
| |
| 2001-08-24 Kunihiro Ishiguro <kunihiro@ipinfusion.com> |
| |
| * Change to use bgp_table.[ch]. |
| |
| 2001-08-23 Kunihiro Ishiguro <kunihiro@ipinfusion.com> |
| |
| * bgpd.c (bgp_init): Add "transparent-as" and |
| "transparent-nexthop" for old version compatibility. |
| |
| 2001-08-23 Akihiro Mizutani <mizutani@dml.com> |
| |
| * bgpd.h (struct peer): default-originate route-map is added. |
| |
| * bgp_route.c: When self originated route is advertised with |
| attrubute-unchanged, nexthop was not properly set. This bug is |
| fixed. |
| |
| 2001-08-22 Akihiro Mizutani <mizutani@dml.com> |
| |
| * bgpd.c (neighbor_attr_unchanged): transparent-as and |
| transparent-next-hop commands are restructured. Instead of |
| current transparent-* commands, attribute-unchanged command is |
| introduced. |
| |
| neighbor A.B.C.D attribute-unchanged [as-path|next-hop|med] |
| |
| (neighbor_default_originate): "default-originate" configuration |
| announce default route even 0.0.0.0/0 does not exists in BGP RIB. |
| |
| 2001-08-19 Kunihiro Ishiguro <kunihiro@ipinfusion.com> |
| |
| * zebra-0.92a released. |
| |
| 2001-08-19 Akihiro Mizutani <mizutani@dml.com> |
| |
| * bgpd.c: AF specific soft-reconfiguration inbound commands are |
| added. |
| |
| 2001-08-17 Kunihiro Ishiguro <kunihiro@ipinfusion.com> |
| |
| * bgp_route.c (bgp_show_callback): Do not do community NULL check. |
| |
| * bgp_community.c (community_cmp): Add check for commnunity NULL |
| check. |
| |
| * bgp_routemap.c (route_match_community): Do not check comunity is |
| NULL. It may match to community-list "^$". |
| |
| * bgp_community.c (community_match): Add check for community is |
| NULL case. |
| |
| 2001-08-17 Akihiro Mizutani <mizutani@dml.com> |
| |
| * bgpd.c: AF specific route-reflector-client and |
| route-server-client configuration are added. |
| |
| 2001-08-17 Rick Payne <rickp@ayrnetworks.com> |
| |
| * bgp_clist.c (community_match_regexp): Check special ^$ case. |
| |
| 2001-08-17 Akihiro Mizutani <mizutani@dml.com> |
| |
| * bgp_clist.c (community_list_match): Fix bug of community list |
| permit and deny check. |
| |
| 2001-08-16 Akihiro Mizutani <mizutani@dml.com> |
| |
| * bgp_mplsvpn.c (bgp_mplsvpn_init): Add AF specific "nexthop-self" |
| command. |
| |
| 2001-08-15 Akihiro Mizutani <mizutani@dml.com> |
| |
| * bgpd.h (PEER_FLAG_SEND_COMMUNITY): Per AF based configuration |
| flag is introduced. |
| |
| * bgp_mplsvpn.c (bgp_mplsvpn_init): VPNv4 filtering is added. |
| |
| 2001-08-15 Kunihiro Ishiguro <kunihiro@ipinfusion.com> |
| |
| * zebra-0.92 released. |
| |
| 2001-08-13 Kunihiro Ishiguro <kunihiro@ipinfusion.com> |
| |
| * bgpd.c (bgp_delete): "no router bgp" free static, aggregate, rib |
| table properly. |
| |
| 2001-08-12 Kunihiro Ishiguro <kunihiro@ipinfusion.com> |
| |
| * bgp_route.c (bgp_node_safi): Return SAFI of current node. |
| (bgp_config_write_network_vpnv4): VPNv4 static configuration |
| display. |
| |
| 2001-08-11 Kunihiro Ishiguro <kunihiro@ipinfusion.com> |
| |
| * bgpd.c (no_bgp_ipv4_multicast_route_map): Add IPv4 multicast |
| node filter commands. |
| |
| 2001-08-11 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgpd.h (PEER_FLAG_IGNORE_LINK_LOCAL_NEXTHOP): Add |
| "ignore-link-local-nexthop" flag for ignore link-local nexthop for |
| IPv6. |
| |
| 2001-08-07 Kunihiro Ishiguro <kunihiro@ipinfusion.com> |
| |
| * bgpd.c (address_family_ipv4_multicast): "address-family ipv4 |
| multicast" is added. |
| (address_family_ipv6_unicast): "address-family ipv6 unicast" is |
| added. |
| |
| 2001-08-07 Akihiro Mizutani <mizutani@dml.com> |
| |
| * bgp_route.c (bgp_process): Use flag instead of as_selected |
| memeber in struct bgp_info. |
| |
| * bgp_route.h (struct bgp_info): Remove as_selected memeber from |
| struct bgp_info. |
| |
| 2001-07-31 Kunihiro Ishiguro <kunihiro@ipinfusion.com> |
| |
| * bgp_route.c (bgp_announce_check): Enclose sending time AS loop |
| check code with #ifdef BGP_SEND_ASPATH_CHECK. |
| |
| 2001-07-29 Kunihiro Ishiguro <kunihiro@ipinfusion.com> |
| |
| * bgp_packet.c (bgp_withdraw_send): Simplify address family check. |
| |
| * bgpd.h (BGP_INFO_HOLDDOWN): Introduce new macro to check BGP |
| information is alive or not. |
| |
| * bgp_community.c: Use community_val_get() on all OS. |
| |
| 2001-07-24 Kunihiro Ishiguro <kunihiro@ipinfusion.com> |
| |
| * bgp_route.c (bgp_announce_check): Simplify set next-hop self |
| check. |
| |
| 2001-07-24 Akihiro Mizutani <mizutani@dml.com> |
| |
| * bgp_route.c (bgp_announce_check): To route server clients, we |
| announce AS path, MED and nexthop transparently. |
| |
| 2001-06-21 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_routemap.c (route_set_atomic_aggregate_free): Do not call |
| XFREE. No memory is allocated in |
| route_set_atomic_aggregate_compile(). |
| |
| 2001-06-21 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_routemap.c (bgp_route_map_init): `match nlri` and `set nlri` |
| are replaced by `address-family ipv4` and `address-family vpnvr'. |
| |
| 2001-06-19 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_route.c (bgp_withdraw): Add check for BGP_PEER_CONFED. |
| Reported by Rick Payne <rickp@rossfell.co.uk>. |
| |
| 2001-06-17 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_zebra.c (bgp_zebra_announce): When global IPv6 nexthop is |
| empty, use socket's remote address for the nexthop. |
| |
| 2001-06-04 Kunihiro Ishiguro <kunihiro@ipinfusion.com> |
| |
| * bgpd.c (peer_delete): Fix memory leak. Reported by Yosi Yarchi |
| <Yosi_Yarchi@KereniX.com> |
| |
| 2001-06-01 Kunihiro Ishiguro <kunihiro@ipinfusion.com> |
| |
| * bgpd.c (bgp_delete): Fix memory leak. Reported by Yosi Yarchi |
| <Yosi_Yarchi@KereniX.com> |
| |
| 2001-05-27 Kunihiro Ishiguro <kunihiro@ipinfusion.com> |
| |
| * bgp_route.c (bgp_route_clear_with_afi_vpnv4): Use next instead |
| of ri->next. |
| |
| * bgp_packet.c (bgp_withdraw_send): MPLS/VPN withdraw takes effect |
| when HAVE_IPV6 is not defined. |
| |
| 2001-03-07 "Akihiro Mizutani" <mizutani@dml.com> |
| |
| * bgpd.c (peer_timers_set): Adjust keepalive timer to fit less |
| than holdtime / 3. |
| (bgp_confederation_peers_unset): Only set peer->local_as when |
| confederation is enabled. |
| (bgp_timers): Add "timers bgp <0-65535> <0-65535>" command. |
| |
| * bgp_route.c (bgp_announce_check): Set med of redistributed route |
| when it is announced to EBGP peer. |
| |
| 2001-03-06 "Akihiro Mizutani" <mizutani@dml.com> |
| |
| * bgp_nexthop.c (bgp_scan_ipv4): bgp_scan() call bgp_process() for |
| all prefixes. |
| |
| 2001-03-06 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_attr.c (bgp_attr_origin): When bgpd send NOTIFICATION with |
| erroneous attribute (type, length and value), it does include |
| attribute flags field. |
| |
| 2001-02-21 "Akihiro Mizutani" <mizutani@dml.com> |
| |
| * bgp_route.c (bgp_announce_check): The route reflector is not |
| allowed to modify the attributes of the reflected IBGP routes. |
| |
| 2001-02-20 "Akihiro Mizutani" <mizutani@dml.com> |
| |
| * bgp_route.c (bgp_info_cmp): During path seleciton, BGP |
| confederation peer is treated as same as IBGP peer. |
| |
| 2001-02-19 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_route.c (bgp_redistribute_add): Initialize attr_new with |
| attr. Call aspath_unintern when return from this function. |
| |
| 2001-02-19 "Akihiro Mizutani" <mizutani@dml.com> |
| |
| * bgpd.c (bgp_router_id_set): Reset BGP peer when router-id is |
| changed. |
| |
| 2001-02-18 "Akihiro Mizutani" <mizutani@dml.com> |
| |
| * bgp_packet.c (bgp_open_receive): When user configure holdtimer, |
| do not refrect the value to current session. |
| |
| 2001-02-16 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_route.c (bgp_aggregate_delete): Set BGP_INFO_ATTR_CHANGE to |
| suppress route withdraw. |
| |
| * bgp_damp.c (bgp_damp_init): Fix bug of flap dampening. |
| |
| 2001-02-16 "Akihiro Mizutani" <mizutani@dml.com> |
| |
| * bgp_aspath.c (aspath_make_str_count): Use ',' for separator for |
| AS_SET and AS_CONFED_SET. |
| |
| 2001-02-15 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_route.c (bgp_process): Do not consider suppress route. |
| |
| * bgp_aspath.c (aspath_aggregate_as_set_add): Reset asset when |
| aspath->data is realloced. |
| |
| 2001-02-15 "Akihiro Mizutani" <mizutani@dml.com> |
| |
| * bgp_attr.c (bgp_attr_aggregate_intern): Do not set atomic |
| aggregate when using as-set. |
| |
| 2001-02-14 "Akihiro Mizutani" <mizutani@dml.com> |
| |
| * bgpd.c (bgp_confederation_peers_unset): Set peer's local-as |
| correctly. |
| |
| * bgp_route.c (bgp_update): Just ignore AS path loop for |
| confederation peer. |
| |
| 2001-02-10 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_route.c (bgp_aggregate_set): Add as_set argument. |
| (bgp_aggregate_unset): Remove summary_only argument. |
| (aggregate_address_as_set): New commands. |
| "aggregate-address A.B.C.D/M as-set" |
| "no aggregate-address A.B.C.D/M as-set" |
| |
| 2001-02-08 "Akihiro Mizutani" <mizutani@dml.com> |
| |
| * bgp_route.c (bgp_announce_check): Do not modify nexthop when the |
| route is passed by route reflector. |
| |
| 2001-02-08 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_route.c: "no bgp dampening" with argument. |
| (bgp_announce_check): Do not modify nexthop when the route is |
| passed by route reflector. |
| |
| 2001-02-07 "Akihiro Mizutani" <mizutani@dml.com> |
| |
| * bgpd.c (neighbor_passive): Change "neighbor NEIGHBOR remote-as |
| ASN passive" to "neighbor NEIGHBOR passive". |
| (bgp_announce_check): Check well-known community attribute even |
| when "no neighbor send-community" is set. |
| |
| 2001-02-03 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_fsm.c (bgp_establish): Do not send keepalive at established |
| time when keepalive timer is configured as zero. |
| |
| 2001-02-01 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_attr.c (bgp_attr_check): When peer is IBGP peer, local |
| preference is well-known attribute. |
| |
| 2001-01-30 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * zebra-0.91 is released. |
| |
| * bgp_attr.h (struct attr): Comment out DPA value. |
| (struct attr): Change refcnt type from int to unsinged long. |
| |
| * bgp_attr.c (attrhash_key_make): Likewise. |
| (attrhash_cmp): Likewise. |
| (bgp_attr_dpa): Likewise. |
| |
| 2001-01-30 "Akihiro Mizutani" <mizutani@dml.com> |
| |
| * bgp_route.c (bgp_info_cmp): Make route selection completely same |
| as Cisco's. |
| |
| 2001-01-30 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_attr.h (BGP_ATTR_FLAG_OPTIONAL): Rename old ATTR_FLAG_* to |
| BGP_ATTR_FLAG_* to clarify meenings. |
| |
| 2001-01-30 "Akihiro Mizutani" <mizutani@dml.com> |
| |
| * bgp_route.c (route_vty_out): Display argument to suppress same |
| prefix information display. |
| (route_vty_out_route): Don't display mask information for |
| classfull network. |
| |
| 2001-01-30 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_attr.h (SET_BITMAP): Simple bitmapping macros. |
| |
| * bgp_attr.c (bgp_attr_parse): Use bitmap for attribute type |
| check. |
| |
| 2001-01-29 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_attr.c (bgp_mp_reach_parse): Enclose loggin with BGP_DEBUG. |
| (bgp_attr_parse): Comment out well-known attribute check. |
| |
| 2001-01-28 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_route.c (bgp_static_unset): Link-local IPv6 address can't be |
| used for network advertisement. |
| (nlri_parse): When link-local IPv6 address NLRI comes from |
| remote-peer, log the information then simply ignore it. |
| |
| * bgp_zebra.c (zebra_read_ipv6): Link-local IPv6 address is not |
| redistributed. |
| |
| * bgp_route.c (bgp_update): Check IPv6 global nexthop |
| reachability. |
| |
| 2001-01-26 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_route.c (bgp_update): Check nexthop points local address or |
| not. |
| (bgp_static_update_vpnv4): Set valid flag. |
| |
| * bgp_attr.c (bgp_attr_parse): Duplicate attribute check. |
| (bgp_attr_parse): Well-known attribute check. |
| |
| * bgp_open.c (bgp_auth_parse): Authentication is not yet supported. |
| |
| * bgp_packet.c (bgp_valid_marker): Check marker is synchronized. |
| |
| * bgpd.c (clear_bgp): Send NOTIFICATION Cease when SEND_CEASE is |
| defined. |
| |
| * bgp_snmp.c (bgp4PathAttrTable): Fix compile error. |
| |
| 2001-01-24 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgpd.c (bgp_network_import_check): New command for IGP network |
| check. |
| |
| 2001-01-23 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_nexthop.c (bgp_scan): Run bgp_process when IGP metric is |
| changed. Call bgp_process once for each node. |
| |
| 2001-01-23 "Akihiro Mizutani" <mizutani@dml.com> |
| |
| * bgp_route.c (bgp_info_cmp): Add IGP metric comparison. |
| |
| 2001-01-23 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_route.c (bgp_info_cmp): Add IGP metric comparison. |
| |
| * bgp_nexthop.c (bgp_nexthop_lookup): Set IGP metric for valid |
| IBGP route. |
| |
| 2001-01-23 "Akihiro Mizutani" <mizutani@dml.com> |
| |
| * bgp_route.c (show_ip_bgp_prefix_longer): Add new commands. |
| "show ip bgp A.B.C.D/M longer-prefixes" |
| "show ip bgp ipv4 (unicast|multicast) A.B.C.D/M longer-prefixes" |
| "show ipv6 bgp X:X::X:X/M longer-prefixes" |
| "show ipv6 mbgp X:X::X:X/M longer-prefixes" |
| |
| 2001-01-20 "Akihiro Mizutani" <mizutani@dml.com> |
| |
| * bgp_route.c (show_ip_bgp_cidr_only): Add new commands. |
| "show ip bgp cidr-only" |
| "show ip bgp ipv4 (unicast|multicast) cidr-only" |
| |
| 2001-01-18 "Akihiro Mizutani" <mizutani@dml.com> |
| |
| * bgp_route.c (bgp_update): AS path lookup check is done in |
| bgp_update() not in attr_parse(). |
| |
| 2001-01-18 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_route.c (bgp_update): Call bgp_aggregate_decrement() just |
| before bgp_attr_unintern(). |
| |
| 2001-01-17 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_route.c (bgp_update): Now intern is performed very last part |
| of the BGP packet update procedure. |
| |
| 2001-01-17 "Akihiro Mizutani" <mizutani@dml.com> |
| |
| * bgp_route.c (bgp_update): When implicit withdraw occur, reuse |
| existing bgp_info structure. |
| |
| 2001-01-17 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_route.c (bgp_aggregate_decrement): Fix bug of aggregate |
| address matching method. |
| (bgp_update): |
| |
| * bgp_nexthop.c (bgp_nexthop_onlink): Separate EBGP nexthop onlink |
| check and IBGP nexthop route check. |
| |
| 2001-01-16 "Akihiro Mizutani" <mizutani@dml.com> |
| |
| * bgp_route.h (BGP_INFO_ATRR_CHANGED): Added for track attribute |
| change. |
| |
| 2001-01-16 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_route.h (struct bgp_info): Remove selected flag. Use |
| BGP_INFO_SELECTED for flags instead. |
| (struct bgp_info): Remove valid flag. Use BGP_INFO_VALID for |
| flags instead. |
| (struct bgp_info): Add igpmetric for IBGP route nexthop IGP |
| metric. |
| (struct bgp_info_tab): Struct bgp_info_tag is integrated into |
| struct bgp_info. |
| (BGP_INFO_ATRR_CHANGED): Added for track attribute change. |
| |
| * bgp_community.c (community_val_get): gcc-2.95 on |
| sparc-sun-solaris cause crush. This function is for avoid the |
| crush. |
| |
| 2001-01-15 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_packet.c (bgp_open_receive): Translated peer's packet_size |
| clear bug is fixed. |
| |
| 2001-01-14 "Akihiro Mizutani" <mizutani@dml.com> |
| |
| * bgp_packet.c (bgp_open_receive): Return notification with |
| supported version number. |
| |
| 2001-01-13 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgpd.c (bgp_show_summary): Display AS path and community |
| entries. Suggested by: "Matt Ranney" <mjr@ranney.com>. |
| |
| * bgp_packet.c (bgp_read_packet): Fix bug of unblocking BGP socket |
| read. When BGP packet read is partial, we must get size and type |
| from packet again. |
| |
| 2001-01-12 "Akihiro Mizutani" <mizutani@dml.com> |
| |
| * bgp_route.c (bgp_update): Do not unset BGP_INFO_HISTORY flag. |
| (bgp_update): When there is a history entry increment route count. |
| (bgp_damp_set): Check BGP_CONFIG_DAMPENING flag. |
| |
| * bgp_damp.c (bgp_damp_withdraw): Set status to |
| BGP_DAMP_DISCONTINUE. |
| |
| 2001-01-11 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_attr.c (bgp_mp_reach_parse): Fix warning code when second |
| IPv6 nexthop is not link-local addresss. |
| |
| 2001-01-11 "Akihiro Mizutani" <mizutani@dml.com> |
| |
| * bgp_damp.c (bgp_config_write_damp): Smart flap dampening |
| configuration display. |
| (bgp_damp_info_print): Display elapsed time from flap started. |
| |
| * bgp_damp.h (struct bgp_damp_info): Add flap start time. |
| |
| * bgpd.c (peer_create): Set last read time. |
| (bgp_show_peer): Display last read time. |
| (bgp_show_summary): Use BGP_CONFIG_DAMPENING flag to check |
| configuration. |
| |
| * bgpd.h (BGP_CONFIG_DAMPENING): Add new configuration option. |
| (struct peer): Add last read time member. |
| (BGP_VERSION_MP_4): Remove obsolete definition. |
| |
| 2001-01-10 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_nexthop.c: Remove OLD_RIB codes. |
| |
| * bgp_route.c (bgp_process): Likewise. |
| |
| * zebra-0.90 is released. |
| |
| * bgp_route.h (BGP_INFO_HISTORY): Remove damped member from struct |
| bgp_info. Instead of that use BGP_INFO_DAMPED flag. |
| (struct bgp_info): Remove invalid member from struct bgp_info. |
| Instead of that use BGP_INFO_HISTORY flag. |
| |
| 2001-01-10 "Akihiro Mizutani" <mizutani@dml.com> |
| |
| * bgp_damp.c (bgp_damp_info_print): New function to display |
| dampening status. |
| (DEFAULT_HARF_LIFE): Define default value. |
| (DEFAULT_REUSE): Likewise. |
| (DEFAULT_SUPPRESS): Likewise. |
| (bgp_config_write_damp): When config value is same as default |
| value, simply display "bgp dampening" to configuration. |
| |
| * bgp_damp.h (struct bgp_damp_info): Add flap member. |
| |
| * bgp_route.h (struct bgp_info): Added for BGP flap dampening |
| history status. |
| |
| 2001-01-10 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_nexthop.c (bgp_connected_add): Point-to-point connected |
| address is properly handled. |
| (bgp_connected_delete): Likewise. |
| |
| * bgp_route.c (bgp_route_init): Turn off BGP Flap dampening code |
| until it works fine. |
| |
| 2001-01-09 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgpd.c (bgp_show_summary): Add BGP_VERSION_MP_4 case. |
| |
| * bgp_route.c (bgp_update): When this is not damped route, clear |
| ri pointer. |
| |
| 2001-01-09 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_main.c: Add "-n" no_kernel option to not install route to |
| kernel. Suggested by: "Matt Ranney" <mjr@ranney.com> |
| |
| 2001-01-09 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_nexthop.c (bgp_connected_add): Revert point-to-point |
| connected route patch. Reported by ruud@ruud.org (Ruud de Rooij) |
| |
| * bgp_damp.c (bgp_config_write_damp): Add configuration display |
| function. |
| |
| * bgp_route.c (bgp_info_free): Set NULL to BGP dampening |
| information when BGP info structure is freed. |
| (bgp_info_cmp): Check damped flag. |
| (bgp_announce_check): Damped route is not announced. |
| |
| 2001-01-09 "Akihiro Mizutani" <mizutani@dml.com> |
| |
| * bgpd.c (neighbor_capability_route_refresh): Change "neighbor |
| route-refresh" command to "neighbor capability route-refresh". |
| (clear_bgp_soft_in): Change soft-reconfig method. |
| |
| clear ip bgp <neighbor> soft in |
| -------------------------------------- |
| Try stored cache first then route-refresh |
| |
| clear ip bgp <neighbor> in |
| --------------------------------- |
| Try route-refresh first then try to use stored cache |
| |
| 2001-01-09 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_nexthop.c (bgp_connected_add): Check point-to-point |
| connected route. Reported by ruud@ruud.org (Ruud de Rooij) |
| |
| 2001-01-08 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_nexthop.c (bgp_nexthop_lookup): When IBGP nexthop is |
| changed, refresh it. |
| |
| 2001-01-04 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_route.h (struct bgp_info_tag): Add as_selected to |
| bgp_info_tag. |
| |
| 2001-01-03 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_route.h (struct bgp_info_tag): Add damped and bgp_damp_info |
| member for BGP flap dampening. |
| |
| * bgp_damp.c: New file is added. |
| |
| * bgp_damp.h: Likewise. |
| |
| 2001-01-01 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgpd.h (BGP_VTYSH_PATH): Change "/tmp/bgpd" to "/tmp/.bgpd". |
| |
| 2000-12-29 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_nexthop.c (zlookup_connect): Change to use UNIX domain |
| socket for zebra communication. |
| |
| 2000-12-29 Akihiro Mizutani <mizutani@dml.com> |
| |
| * bgp_route.c (bgp_process): Fix "bgp deterministic-med" process. |
| |
| 2000-12-27 Akihiro Mizutani <mizutani@dml.com> |
| |
| * bgp_route.c (bgp_process): Add "bgp deterministic-med" process. |
| |
| 2000-12-25 Akihiro Mizutani <mizutani@dml.com> |
| |
| * bgp_route.c (bgp_info_cmp): Use ntohl comparing router ID. |
| |
| 2000-12-18 Akihiro Mizutani <mizutani@dml.com> |
| |
| * bgp_route.c (bgp_info_cmp): When over three same prefix exit, |
| withdrawing best prefix perform router ID comparison. |
| |
| 2000-12-15 Akihiro Mizutani <mizutani@dml.com> |
| |
| * bgp_route.c (bgp_info_cmp): Do not compare router ID when the |
| routes comes from EBGP peer. When originator ID is same, take |
| shorter cluster-list route. If cluster-list is same take smaller |
| IP address neighbor's route. |
| |
| * bgpd.c (bgp_bestpath_aspath_ignore): Add "bgp bestpath as-path |
| ignore" command. When this option is set, do not concider AS path |
| length when route selection. |
| (bgp_bestpath_compare_router_id): Add "bgp bestpath |
| compare-routerid". When this option is set, compare router ID |
| when the routes comes from EBGP peer. |
| |
| 2000-12-15 Akihiro Mizutani <mizutani@dml.com> |
| |
| * bgp_route.c (bgp_info_cmp): Compare originator ID when it is |
| available. |
| |
| 2000-12-14 Akihiro Mizutani <mizutani@dml.com> |
| |
| * bgp_packet.c (bgp_notify_receive): Disply received Notify data |
| information. |
| |
| 2000-12-14 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_filter.c (as_filter_free): Use MTYPE_AS_FILTER_STR to make |
| it sure the memory is freed. |
| |
| * bgp_route.c (route_vty_out_detail): Do not use AF_INET6 outside |
| HAVE_IPV6. |
| |
| 2000-12-08 Akihiro Mizutani <mizutani@dml.com> |
| |
| * bgp_packet.c (bgp_notify_send_with_data): Store BGP notification |
| data part. |
| |
| * bgp_network.c (bgp_accept): When BGP connection comes from |
| unconfigured IP address, close socket immediately. |
| |
| * bgpd.c: Fix some display format. |
| |
| 2000-11-29 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_packet.c (bgp_keepalive_send): Delete duplicate |
| bgp_packet_set_size () call. |
| |
| 2000-11-28 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_packet.c (bgp_read_packet): Remove debug codes. |
| |
| 2000-11-27 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_snmp.c (write_bgpPeerTable): Add SNMP set method routine. |
| |
| * bgp_fsm.c (bgp_stop): Use fsm_change_status to change peer's |
| status. |
| (bgp_establish): Likewise. |
| |
| 2000-11-26 Akihiro Mizutani <mizutani@dml.com> |
| |
| * bgp_open.c: Fix error messages. |
| |
| 2000-11-25 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_fsm.c (bgp_establish): Call BGP trap when the peer is |
| established. |
| (bgp_stop): Call BGP trap when the peer is dropped. |
| |
| 2000-11-24 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_snmp.c (bgp4PathAttrTable): Return BGP path attribute table. |
| |
| * bgpd.h (struct peer): Add update_time for track last update |
| received time. |
| |
| * bgp_packet.c (bgp_notify_receive): Preserv notify code and sub |
| code in any case. |
| |
| * bgp_snmp.c (bgpPeerTable): Return remote router ID instead of |
| peering IP address. |
| (bgpPeerTable): Return actual BGP version number. |
| |
| 2000-11-22 Akihiro Mizutani <mizutani@dml.com> |
| |
| * bgp_debug.c (bgp_notify_print): Notify data length display bug |
| is fixed. |
| |
| 2000-11-16 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_nexthop.c (zlookup_connect): When UNIX domain connection to |
| zebra is enabled, use the method. |
| |
| 2000-11-16 Akihiro Mizutani <mizutani@dml.com> |
| |
| * bgpd.c: Revise debug message output. |
| |
| 2000-11-15 Akihiro Mizutani <mizutani@dml.com> |
| |
| * bgp_clist.c (ip_community_list): Fix bug of string comparison. |
| |
| 2000-11-14 Akihiro Mizutani <mizutani@dml.com> |
| |
| * bgp_community.c (community_match): Fix bug of memcmp return |
| value check. |
| |
| 2000-11-07 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_clist.c (community_list_match_exact): Add check for |
| entry->style is COMMUNITY_LIST. |
| (community_match_regexp): Apply new com_nthval macro. |
| |
| 2000-11-07 Rick Payne <rickp@rossfell.co.uk> |
| |
| * bgp_routemap.c (route_set_community_delete): "set |
| community-delete COMMUNITY-LIST" is added. |
| |
| * bgp_community.c (community_del_val): Delete one community. |
| (community_delete): Delete all community included in list. |
| (community_match): Fix bug of matching community value. |
| |
| * bgp_clist.c (community_entry_free): Free community regular |
| expression. |
| (community_entry_make): Default style is COMMUNITY_LIST. |
| (community_entry_lookup): Make it sure style is COMMUNITY_LIST. |
| (community_entry_regexp_lookup): New function for community |
| regular expression lookup. |
| (community_match_regexp): New function. |
| (community_delete_regexp): New function. |
| (community_list_delete_entries): New function. |
| (community_list_match): Add COMMUNITY_REGEXP treatment. |
| (community_list_match_exact): Likewise. |
| (config_write_community): Write community list according to |
| entry->style. |
| |
| 2000-11-07 Rick Payne <rickp@rossfell.co.uk> |
| |
| * bgp_attr.c (bgp_attr_aspath): AS path first AS check. |
| |
| * bgp_clist.c (struct community_entry): Add style, regexp, reg to |
| community_entry. |
| |
| 2000-11-06 Rick Payne <rickp@rossfell.co.uk> |
| |
| * bgp_aspath.c (aspath_firstas_check): AS path first AS check. |
| |
| * bgpd.c (bgp_enforce_first_as): New command "bgp |
| enforce-first-as". |
| |
| * bgpd.h (BGP_CONFIG_ENFORCE_FIRST_AS): Add new flag. |
| |
| 2000-11-06 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_community.c (community_compare): Copy byte stream data to |
| actual value instead of using type casting hack. |
| (community_add_val): Likewise. |
| (community_uniq_sort): Likewise. |
| (community_print): Likewise. |
| (community_print_vty): Likewise. |
| (community_include): Use memcmp to compare community value. |
| |
| * bgp_community.h (com_lastval): com_lastval and com_nthval macro |
| return pointer. |
| |
| 2000-11-06 Akihiro Mizutani <mizutani@dml.com> |
| |
| * bgpd.h (struct peer): Add established and dropped member for |
| count peering up/down statistics. |
| |
| * bgpd.c (bgp_show_peer): Display peering up/down statistics. |
| |
| * bgp_fsm.c (bgp_establish): Increment established count. |
| (bgp_stop): Increment dropped count. |
| |
| * bgp_packet.c (bgp_notify_receive): Increament notify count. |
| |
| 2000-11-1 Akihiro Mizutani <mizutani@dml.com> |
| |
| * bgp_fsm.c: Fix bug of holdtimer is not reset when bgp cleared. |
| |
| 2000-10-31 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgpd.h: Static bit flag is set by (1 << DIGIT). |
| |
| 2000-10-24 Akihiro Mizutani <mizutani@dml.com> |
| |
| * bgp_ecommunity.c (ecommunity_dup): Extended community display |
| format fix. |
| |
| 2000-10-24 Arkadiusz Miskiewicz <misiek@pld.org.pl> |
| |
| * bgp_network.c (bgp_serv_sock_addrinfo): Use gai_strerror. |
| (bgp_serv_sock_addrinfo): Check address family. |
| |
| 2000-10-23 Jochen Friedrich <jochen@scram.de> |
| |
| * bgp_snmp.c: bgp_oid and bgpd_oid are used in smux_open after it |
| is registered. So those variables must be static. |
| |
| 2000-10-23 Akihiro Mizutani <mizutani@dml.com> |
| |
| * bgp_routemap.c (route_match_ip_next_hop): Change "match ip |
| next-hop" argument from IP address to access-list name. |
| Remove zebra-0.88 compatibility commands. |
| "match ip prefix-list WORD" |
| "match ipv6 prefix-list WORD" |
| |
| 2000-10-23 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_routemap.c (route_match_ipv6_next_hop_compile): Fix bug of |
| passing the pointer to the pointer of struct in6_addr instead of |
| the pointer of struct in6_addr in "match ipv6 next-hop" command. |
| |
| * bgp_route.c (bgp_announce_check): Enclose IPv6 part with |
| HAVE_IPV6. |
| |
| 2000-10-20 Jasper Wallace <jasper@ivision.co.uk> |
| |
| * bgp_snmp.c (bgpPeerTable): ntohs missing bug is fixed. Change |
| to use linklist.c. Define COUNTER32 as ASN_COUNTER. |
| |
| 2000-10-18 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_route.c (bgp_announce_check): attr->nexthop empty check |
| should be done by attr->nexthop.s_addr instead of strcmp. |
| |
| 2000-10-18 Akihiro Mizutani <mizutani@dml.com> |
| |
| * bgp_zebra.c (zebra_read_ipv4): Pass nexthop value to |
| bgp_redistribute_add(). |
| |
| * bgp_nexthop.c (bgp_multiaccess_check_v4): New function for |
| checking IPv4 multiaccess nexthop. |
| |
| * bgp_route.c (bgp_announce_check): In case of the nexthop is |
| reachable on multiaccess media, do not change nexthop. |
| (bgp_redistribute_add): Set nexthop when the value is passed. |
| |
| 2000-10-17 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_fsm.c (bgp_timer_set): If peer is passive mode, do not set |
| connect timer. |
| (bgp_start): If the peer is passive mode, force to move to Active |
| mode. |
| |
| 2000-10-17 Horms <horms@vergenet.net> |
| |
| * bgp_debug.c (debug_bgp_fsm): Fix typo. |
| |
| 2000-10-17 Akihiro Mizutani <mizutani@dml.com> |
| |
| * bgp_route.c: "show ipv6 bgp" route display improvement. |
| |
| 2000-10-03 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_route.c (neighbor_routes): Allocate sockunion for callback |
| function. |
| (bgp_show_neighbor_route): Remove static declaration for union |
| sockunion. |
| |
| * bgpd.c (peer_update_source_set): Clean previously allocated |
| memory before allocate new one. |
| |
| 2000-10-03 Akihiro Mizutani <mizutani@dml.com> |
| |
| * bgp_route.c (neighbor_routes): Add show neighbor's routes |
| command. |
| "show ip bgp neighbors (A.B.C.D|X:X::X:X) routes" |
| "show ip bgp ipv4 (unicast|multicast) neighbors (A.B.C.D|X:X::X:X) routes" |
| "show ipv6 bgp neighbors (A.B.C.D|X:X::X:X) routes" |
| "show ipv6 mbgp neighbors (A.B.C.D|X:X::X:X) routes" |
| |
| 2000-10-02 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * zebra-0.89 is released. |
| |
| 2000-10-02 Akihiro Mizutani <mizutani@dml.com> |
| |
| * bgpd.c: "bgp deterministic-med" command is added. |
| |
| 2000-10-02 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_nexthop.c (bgp_connected_add): Apply mask for connected |
| route addition and deletion. |
| |
| 2000-09-29 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_aspath.c (aspath_cmp_left): Skip confederation AS segment |
| when comparing leftmost AS number. |
| |
| 2000-09-29 Akihiro Mizutani <mizutani@dml.com> |
| |
| * bgpd.c (peer_route_reflector): Route reflector can be set for |
| IBGP peer. |
| (bgp_distribute_set): Fix bug of string check for (in|out). |
| (bgp_show_summary): Display total neighbor count. |
| |
| 2000-09-28 Akihiro Mizutani <mizutani@dml.com> |
| |
| * bgp_attr.c (bgp_packet_attribute): Only add cluster_list and |
| originator for clinet to client routes. |
| (bgp_packet_attribute): Add new cluster_list to the beginning of |
| existing cluster_list. |
| (bgp_packet_attribute): Fix bug of originator is rewritten even |
| when originator is already set. |
| |
| 2000-09-27 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgpd.c (bgp_client_to_client_reflection): Add new command. |
| "no bgp client-to-client reflection" |
| "bgp client-to-client reflection" |
| |
| * bgpd.h (BGP_CONFIG_NO_CLIENT_TO_CLIENT): Add new definition. |
| |
| 2000-09-26 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_packet.c (bgp_read): Make BGP packet read to non-blocking |
| read. |
| (bgp_read_packet): Likewise. |
| (bgp_read_packet): When errono is EAGAIN, try to read it again. |
| |
| * bgp_fsm.c (bgp_stop): Clear packet size and read buffer. |
| |
| 2000-09-26 Akihiro Mizutani <mizutani@dml.com> |
| |
| * bgp_routemap.c: Configuration of prefix-list match is shown as |
| "match ip address prefix-list <WORD>". Old configuration "match |
| ip prefix-list <WORD>" is left for compatibilitty. |
| |
| 2000-09-25 Akihiro Mizutani <mizutani@dml.com> |
| |
| * bgpd.h (BGP_CONFIG_MED_MISSING_AS_WORST): Changed from |
| BGP_CONFIG_MISSING_AS_WORST. |
| |
| * bgpd.c (bgp_bestpath_med): Change missing-as-worst syntax. |
| Old "bgp bestpath missing-as-worst" |
| New "bgp bestpath med missing-as-worst" |
| |
| 2000-09-24 Akihiro Mizutani <mizutani@dml.com> |
| |
| * bgp_route.c: Compare MED properly in case of CONFED-IBGP. |
| |
| 2000-09-21 steve@Watt.COM (Steve Watt) |
| |
| * bgp_debug.h: Do not declare debug variables conf_bgp_debug_* and |
| term_bgp_debug_*. |
| |
| * bgp_debug.c: Declare variables here. |
| |
| 2000-09-21 Akihiro Mizutani <mizutani@dml.com> |
| |
| * bgpd.c: MBGP soft-reconfiguration command is added. |
| clear ip bgp x.x.x.x ipv4 (unicast|multicast) in |
| clear ip bgp x.x.x.x ipv4 (unicast|multicast) out |
| clear ip bgp x.x.x.x ipv4 (unicast|multicast) soft |
| clear ip bgp <1-65535> ipv4 (unicast|multicast) in |
| clear ip bgp <1-65535> ipv4 (unicast|multicast) out |
| clear ip bgp <1-65535> ipv4 (unicast|multicast) soft |
| clear ip bgp * ipv4 (unicast|multicast) in |
| clear ip bgp * ipv4 (unicast|multicast) out |
| clear ip bgp * ipv4 (unicast|multicast) soft |
| |
| Change "clear ip bgp vpnv4 x.x.x.x soft" command to |
| "clear ip bgp x.x.x.x vpnv4 unicast soft". |
| |
| "bgp bestpath med confed" command is added. |
| |
| * bgpd.h (BGP_CONFIG_MED_CONFED): Add New definition. |
| |
| 2000-09-18 Rick Payne <rickp@rossfell.co.uk> |
| |
| * bgpd.c (bgp_show_peer): Fix misplaced #endif. |
| |
| 2000-09-12 Akihiro Mizutani <mizutani@dml.com> |
| |
| * bgpd.c (bgp_default_local_preference): Add "bgp default |
| local-preference" command. |
| |
| * bgp_nexthop.c (no_bgp_scan_time): Add "no bgp scan-time" |
| command. |
| |
| 2000-09-10 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_zebra.c (bgp_zebra_announce): BGP confederation peer's routes |
| are passed to zebra like IBGP route. |
| |
| 2000-09-10 Akihiro Mizutani <mizutani@dml.com> |
| |
| * bgpd.c (bgp_config_write_peer): Make it consistent passive |
| configuration. |
| |
| * bgp_route.c: Community match command is added. |
| "show ip bgp community <val>" |
| "show ip bgp community <val> exact-match" |
| |
| 2000-09-08 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_nexthop.c (bgp_nexthop_lookup): ebgp-multihop routes are |
| treated as IBGP routes. |
| |
| 2000-09-08 Akihiro Mizutani <mizutani@dml.com> |
| |
| * bgp_route.c (bgp_show_route): When local-AS community route is |
| selected, display "not advertised outside local AS" to "show ip |
| route A.B.C.D" output. |
| (show_ip_bgp_ipv4_filter_list): Add below four commands. |
| "show ip bgp ipv4 (unicast|multicast) filter-list WORD" |
| "show ip bgp ipv4 (unicast|multicast) community" |
| "show ip bgp ipv4 (unicast|multicast) community-list WORD" |
| "show ip bgp ipv4 (unicast|multicast) community-list WORD exact-match" |
| |
| * bgp_clist.c (community_list_match_exact): Community exact match |
| function. |
| |
| 2000-09-07 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_route.c (bgp_update): Add peer's ttl check. |
| |
| * bgpd.h (struct peer): Structure member refresh is renamed to |
| refresh_adv. |
| |
| * bgpd.c (clear_bgp_soft_in): Check PEER_FLAG_ROUTE_REFRESH flag |
| when soft reconfiguration is performed. |
| |
| * bgp_zebra.c (bgp_zebra_announce): When the peer is EBGP and |
| ebgp-multiphop is set, set ZEBRA_FLAG_INTERNAL for nexthop lookup. |
| |
| * bgp_route.h (struct bgp_info_tag): Add valid flag. |
| |
| 2000-08-25 Akihiro Mizutani <mizutani@dml.com> |
| |
| * bgpd.c: Add AS base BGP soft reconfiguration. |
| |
| * bgp_route.c: When no-advertise or no-export route is selected, |
| "show ip bgp" display "not advertised to EBGP peer" or "not |
| advertised to any peer" message. |
| |
| 2000-08-17 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * zebra-0.88 is released. |
| |
| * bgp_dump.c (dump_bgp_routes): Change "dump bgp routes" to "dump |
| bgp route-mrt" to support MRT specific dump format. |
| |
| * bgpd.c (bgp_init): "clear ip bgp vpnv4 soft {in,out}" command is |
| added. |
| |
| * bgp_route.c (bgp_update): Currently nexthop check is only works |
| for IPv4. |
| |
| 2000-08-17 Akihiro Mizutani <mizutani@dml.com> |
| |
| * bgpd. (clear_ip_bgp_all_soft): Add "clear ip bgp * soft" for |
| both inbound and outbound soft reconfiguration. |
| |
| 2000-08-17 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgpd.c (clear_ip_bgp_peer_soft_out): Add soft-reconfiguration |
| outbound. |
| (peer_new): Set route-refresh flag. |
| |
| 2000-08-16 Akihiro Mizutani <mizutani@dml.com> |
| |
| * bgpd.c: "no bgp router-id A.B.C.D" alias is added. "no bgp |
| cluster-id A.B.C.D" alias is added. " bgp cluster-id |
| <1-4294967295>" alias is added. "clear ip bgp * soft in" command |
| is added. "clear ip bgp A.B.C.D in" alias is added. "clear ip |
| bgp * in" alias is added. |
| |
| 2000-08-16 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_route.c (bgp_update): Add soft_reconfig flag. When the flag |
| is set do not install the route into Adj-RIBs-In. |
| (bgp_update): Perform implicit withdraw before filtering of the |
| route. |
| |
| * bgp_packet.c (bgp_read): draft-ietf-idr-bgp-route-refresh-01.txt |
| capability code and BGP message can be accepted. |
| |
| * bgp_open.c (bgp_capability_parse): Likewise. |
| |
| * bgp_route.c (bgp_refresh_table): New function for route refresh. |
| (bgp_refresh_rib): Likewise. |
| |
| * bgpd.c (bgp_show_peer): Display route refresh status. |
| |
| * bgp_route.c (bgp_aggregate_add): Add check for the route |
| validness. |
| (bgp_aggregate_delete): Likewise. |
| |
| 2000-08-15 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_nexthop.c (bgp_scan): Care for aggregate route when the |
| route become inaccessible. |
| |
| 2000-08-15 Akihiro Mizutani <mizutani@dml.com> |
| |
| * bgp_route.c (show_ip_bgp_prefix): "show ip bgp A.B.C.D/M" |
| command is added. |
| |
| 2000-08-15 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_zebra.c (bgp_interface_up): Register connected route. |
| (bgp_interface_down): Unregister connected route. |
| |
| 2000-08-14 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_route.h (struct bgp_info): Add distance to the structure. |
| |
| * bgp_route.c (bgp_aggregate_increment): Aggregate route only |
| match to smaller prefixlen route not match same prefixlen route. |
| (bgp_aggregate_decrement): Likewise. |
| (bgp_aggregate_add): Likewise. |
| (bgp_aggregate_delete): Likewise. |
| (bgp_network_backdoor): Add backdoor network configuration. |
| |
| * bgpd.h (struct bgp ): Add distance_{ebgp,ibgp,local} for store |
| configuration distance value. |
| |
| * bgp_route.c (bgp_update): Filter EBGP route which has non |
| connected nexthop. |
| |
| * bgp_attr.c (bgp_attr_aggregate_intern): New function for |
| aggregate route. Set origin to IGP. Set atomic aggregate flag. |
| Set aggregator AS and address. |
| (bgp_attr_aggregate_intern): Check BGP_CONFIG_CONFEDERATION when |
| filling aggregator_as. |
| |
| * bgp_route.c (bgp_process): Delete suppress check for install |
| suppressed route into local routing table. |
| (bgp_aggregate_increment): Use bgp_attr_aggregate_intern() instead |
| of bgp_attr_default_intern (). |
| (bgp_aggregate_add): Likewise. |
| |
| * bgpd.c (bgp_get): Call bgp_if_update_all() after BGP instance is |
| created. This is for avoid 0.0.0.0 router-id. |
| |
| 2000-08-13 Akihiro Mizutani <mizutani@dml.com> |
| |
| * bgp_route.c (route_vty_out_detail): Display "valid" when the |
| route is valied. Display "aggregated" when the route is |
| aggregated. "Advertisements suppressed by an aggregate" is |
| displayed when the route is suppressed. |
| (bgp_info_cmp): Prefer EBGP than Confed-EBGP. |
| |
| 2000-08-10 Akihiro Mizutani <mizutani@dml.com> |
| |
| * bgp_route.c (route_vty_out_detail): Display format change. |
| |
| 2000-08-06 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_route.c (bgp_update): Only AFI_IP nexthop check is enabled. |
| |
| * bgpd.c (bgp_delete): Delete static route before delete peer |
| configuration. |
| |
| 2000-08-02 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgpd.c: Include bgpd/bgp_nexthop.h. |
| |
| 2000-07-31 Akihiro Mizutani <mizutani@dml.com> |
| |
| * bgpd.c (bgp_show_summary): "show ip bgp summary" shows own BGP |
| identifier. And status is changed like below. |
| |
| State/Pref -> State/PfxRcd |
| Shutdown -> Idle (Admin) |
| PrefixOvflw -> Idle (PfxCt) |
| |
| * bgp_route.c (route_vty_out): Show internal route as "i". |
| |
| 2000-07-13 Jim Bowen <jimb@zereau.net> |
| |
| * bgp_snmp.c: Add BGP peer MIB implementation. |
| |
| 2000-07-12 Akihiro Mizutani <mizutani@dml.com> |
| |
| * bgpd.c (bgp_show_peer): Fix typo. |
| |
| 2000-07-11 Akihiro Mizutani <mizutani@dml.com> |
| |
| * bgp_routemap.c: Add commands for deleting set without argument. |
| |
| 2000-07-03 Akihiro Mizutani <mizutani@dml.com> |
| |
| * bgp_zebra.c: Fix redistribute help strings. |
| |
| 2000-07-01 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_route.c (bgp_show): When bgpd works as vtysh server send all |
| output to vty at once. |
| |
| 2000-06-13 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_mplsvpn.c (no_vpnv4_network): "no network A.B.C.D/M rd WORD |
| tag WORD" command is added. |
| |
| * bgp_ecommunity.c (ecommunity_vty_out): New function added. |
| |
| 2000-06-12 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_route.c (bgp_show): Fix total number of prefix count bug. |
| |
| * bgpd.c (bgp_show_peer): Display VPNv4 unicast configuration and |
| negotiation result in "show ip bgp neighbors". |
| |
| 2000-06-12 Akihiro Mizutani <mizutani@dml.com> |
| |
| * bgpd.c: Fix help strings. |
| |
| * bgpd.h: Likewise. |
| |
| 2000-06-11 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_route.c (bgp_aggregate_unset): Fix bug of checking rn->info |
| instead of rn. Reported by Akihiro Mizutani <mizutani@dml.com>. |
| |
| * bgp_mplsvpn.c (vpnv4_network): For testing purpose, "network |
| A.B.C.D rd RD" is added to address-family vpnv4 unicast node. |
| |
| * bgp_route.c (bgp_static_set): Set safi to p.safi. |
| |
| 2000-06-10 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_route.c (bgp_show_prefix_list): Change to use bgp_show(). |
| (bgp_show_regexp): Change to use bgp_show(). |
| (show_adj_route): Change to display header. |
| |
| * bgpd.c (clear_bgp): Set peer->v_start to default value when peer |
| is cleared manually. |
| |
| * bgp_route.c (bgp_show_route): New function which display |
| specific BGP route. Divided from bgp_show(). |
| (bgp_static_delete): Delete all static route. |
| |
| 2000-06-09 NOGUCHI Kay <kay@v6.access.co.jp> |
| |
| * bgp_route.c (show_ipv6_bgp): "show ipv6 bgp" is broken with |
| invalid privious fix. Now show_ipv6_bgp and show_ipv6_bgp_route |
| take care of "show ipv6 bgp [X:X::X:X]". Same change for "show ip |
| mbgp" and "show ipv6 mbgp". |
| |
| 2000-06-07 Akihiro Mizutani <mizutani@dml.com> |
| |
| * bgp_route.c: Fix help strings and command arguments. |
| |
| 2000-06-06 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_ecommunity.c: Include prefix.h |
| |
| 2000-06-05 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_route.h (struct bgp_info_tag): New structure to hold tag |
| value. |
| |
| * bgp_route.c (bgp_adj_set): table NULL check is added. |
| (bgp_adj_unset): Likewise. |
| (bgp_adj_lookup): Likewise. |
| (bgp_adj_clear): Likewise. |
| (route_vty_out): Add SAFI check for nexthop display. |
| (bgp_withdraw): Add SAFI check for withdraw route. |
| |
| * Remove all #ifdef MPLS_VPN then include it as default. |
| |
| * bgpd.c: Temporary disable peer-group command until the |
| implementation is completed. |
| |
| * bgp_routemap.c (bgp_route_map_init): Install |
| route_metric_match_cmd. |
| (route_match_metric_compile): MED value compile using strtoul. |
| |
| 2000-06-05 Akihiro Mizutani <mizutani@dml.com> |
| |
| * bgp_filter.c: Fix help strings. Change REGEXP to LINE. Change |
| NAME to WORD. |
| |
| * Change command argument to more comprehensive. |
| |
| METRIC -> <0-4294967295> |
| WEIGHT -> <0-4294967295> |
| LOCAL_PREF -> <0-4294967295> |
| IP_ADDR -> A.B.C.D |
| AS -> <1-65535> |
| AS-PATH-NAME -> WORD |
| ACCESS_LIST -> WORD |
| PREFIX_LIST -> WORD |
| COMMUNITY -> AA:NN |
| EXT_COMMUNITY -> ASN:nn_or_IP-address:nn |
| IPv6_ADDR -> X:X::X:X |
| |
| * bgp_clist.c: Fix help strings. |
| |
| 2000-06-03 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgpd.c (peer_active): Add new function for check the peer is |
| active or not. |
| (neighbor_activate): New command "neighbor PEER activate" and "no |
| neighbor PEER activate" are added. |
| |
| * bgp_packet.c: Include bgpd/bgp_mplsvpn.h. |
| |
| 2000-06-02 Akihiro Mizutani <mizutani@dml.com> |
| |
| * bgp_clist.c: Fix commuity-list help strings. |
| |
| * bgp_routemap.c: Fix "set community" help strings. Add #define |
| SET_STR. Use (unicast|multicast) argument for "set nlri" command. |
| |
| 2000-06-01 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_routemap.c (route_set_community_none_cmd): "set community |
| none" command is added to route-map. |
| |
| 2000-06-01 Akihiro Mizutani <mizutani@dml.com> |
| |
| * bgp_debug.c: Change "show debug" to "show debugging". Now "show |
| debugging" is not used in VIEW_NODE. |
| |
| 2000-05-30 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_fsm.c (bgp_timer_set): Add check for shutdown flag. This |
| fix unconditional BGP connection. |
| |
| * bgpd.c (peer_shutdown): Replace peer_shutdown() with |
| peer_change_flag_with_reset(). |
| |
| 2000-05-26 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgpd.c (no_bgp_default_ipv4_unicast): Add "no bgp default |
| ipv4-unicast" command. |
| |
| * bgpd.h (BGP_CONFIG_NO_DEFAULT_IPV4): Add new definition. |
| |
| * bgp_filter.c (as_list_delete): Free all AS filter. |
| |
| * bgp_clist.c (community_list_delete): Free all community entry. |
| |
| * bgp_filter.c (no_ip_as_path_all): New DEFUN for "no ip as-path |
| access-list NAME". |
| |
| * bgp_clist.c (no_ip_community_list_all): New DEFUN for "no ip |
| community-list NAME". |
| |
| 2000-05-19 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_route.c (ipv6_mbgp_neighbor_routes): Change "show ip bgp PEER |
| routes" to "show ip bgp PEER received-routes" |
| |
| 2000-05-14 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_ecommunity.c (ecommunity_parse): New file for Extended |
| Communities attribute. |
| * bgp_ecommunity.h: Likewise. |
| |
| 2000-05-11 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_mplsvpn.h: New file for MPLS-VPN. |
| * bgp_mplsvpn.c: Likewise. |
| |
| * bgpd.c (bgp_delete): Fix bug of "no router bgp" crush. |
| |
| 2000-05-10 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgpd.c (bgp_bestpath_missing_as_worst): Add "bgp bestpath |
| missing-as-worst". |
| |
| 2000-05-08 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_routemap.c (match_community): Clarify help of "match |
| community". |
| |
| 2000-05-02 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_aspath.c (aspath_cmp_left): Remove debug code. |
| |
| 2000-04-27 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_route.c (bgp_info_cmp): Compare MED only both routes comes |
| from same neighboring AS. |
| |
| * bgp_aspath.c (aspath_cmp_left): Compare leftmost AS value. |
| |
| * bgp_route.c (bgp_info_cmp): Fix misused htonl() to ntohl(). |
| |
| 2000-04-26 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_route.c (bgp_output_filter): When distribute-list's |
| corresponding access-list does not exist, filter all routes. |
| (bgp_input_filter): Likewise. |
| |
| 2000-04-19 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_attr.c (bgp_packet_attribute): Propagate MED to IBGP peer. |
| |
| * bgp_route.c (bgp_info_cmp): Add evaluation of local preference. |
| |
| 2000-04-18 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgpd.c (bgp_distribute_update): Add struct access_list * |
| argument. |
| |
| 2000-04-17 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_clist.c (community_list_dup_check): Add duplicate insertion |
| check. |
| |
| * bgp_filter.c (as_list_dup_check): Add duplicate insertion check. |
| |
| * bgp_route.c (bgp_show): Fix undeclared write variable. |
| |
| 2000-04-13 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_routemap.c: Add "match ip address prefix-list". |
| |
| 2000-03-29 Rick Payne <rickp@rossfell.co.uk> |
| |
| * bgp_aspath.c (aspath_strip_confed): Fix realloc problem. |
| |
| 2000-03-16 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_fsm.c (bgp_reconnect): Connect retry timer is expired when |
| the peer status is Connect. |
| |
| 2000-03-03 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * Fix bug of rewritten originator-id. |
| |
| 2000-01-27 Rick Payne <rickp@rossfell.co.uk> |
| |
| * bgp_aspath.c (aspath_delimiter_char): New function. Instead of |
| directly referencing array, search proper AS path delimiter. |
| (aspath_strip_confed): Strip the confederation stuff from the |
| front of an AS path. |
| (aspath_add_left_confed): New function for adding specified AS to |
| the leftmost AS_CONFED_SEQUENCE. |
| |
| * bgp_aspath.h: Change AS_CONFED_SEQUENCE and AS_CONFED_SET value |
| to Cisco compatible. |
| |
| * bgpd.c (bgp_confederation_id_set): Confederation configuration. |
| (bgp_confederation_id_unset): Likewise. |
| (bgp_confederation_peers_check): Likewise. |
| (bgp_confederation_peers_add): Likewise. |
| (bgp_confederation_peers_remove): Likewise. |
| (bgp_confederation_peers_set): Likewise. |
| (bgp_confederation_peers_unset): Likewise. |
| (bgp_confederation_peers_print): Likewise. |
| |
| 2000-01-16 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgpd.c: Introduce peer_change_flag_with_reset() fucntion. |
| |
| 2000-01-17 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_open.c (bgp_open_option_parse): When there is no common |
| capability send Unsupported Capability error to the peer. |
| |
| 2000-01-14 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_open.c (bgp_capability_mp): Fix bug of mis-negotiation about |
| IPv6 unicast. |
| |
| * bgpd.c (bgp_init): Add "soft-reconfiguration inbound" command. |
| |
| 2000-01-12 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgpd.c (neighbor_strict_capability): Add |
| "strict-capability-match" command. |
| |
| * bgp_zebra.c (bgp_if_update): Ignore NET127 determining |
| router-id. |
| |
| * bgpd.c (peer_override_capability): Add "override-capability" |
| command. |
| |
| 1999-12-16 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_packet.c (bgp_write): Change status to Idle and set timer |
| after write failed. |
| |
| 1999-12-14 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_zebra.c (bgp_zebra_announce): Add info->selected check. |
| |
| 1999-12-12 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_route.c (nlri_unfeasible): nlri_unfeasible() is merged with |
| nlri_parse(). |
| |
| 1999-12-10 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_fsm.h (BGP_EVENT_DELETE): Macro added. |
| |
| * bgp_fsm.c (bgp_stop): Clear all event threads of the peer when |
| the peer is cleared. |
| |
| * bgp_zebra.c (bgp_nexthop_set): Clear interface index of |
| link-local address. This is KAME specific problem. |
| |
| 1999-12-06 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_attr.c (bgp_mp_reach_parse): Comment out previous code for a |
| while. We don't completely detect the link is shared or not at |
| this moment. |
| |
| * bgp_packet.c (bgp_notify_send): Make shortcut call of |
| bgp_write() and bgp_stop(). |
| |
| * bgp_attr.c (bgp_mp_reach_parse): Fix serious bug when getting |
| global and link-local address. |
| |
| 1999-12-05 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgpd.c (no_neighbor_port): New command added. |
| (peer_new): Set send_community. |
| |
| 1999-12-04 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgpd.c (show_ip_bgp_summary): Changed to use bgp_show_summary(). |
| (show_ip_mbgp_summary): Likewise. |
| (show_ipv6_bgp_summary): Likewise. |
| (show_ipv6_mbgp_summary): Add new command. |
| (peer_free): Free peer->host. |
| (peer_lookup_by_su): Delete function. |
| (ipv6_bgp_neighbor): Changed to use peer_remote_as(). |
| (sockunion_vty_out): Function deleted. |
| (vty_clear_bgp): Use afi instead of family. |
| Delete old list bgp_list. Use struct newlist *bgplist. |
| (peer_lookup_by_host): Function deleted. |
| |
| 1999-12-03 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgpd.h (struct peer_group): New structure added. |
| (struct peer_conf): New structure added. |
| (struct peer): Change all prefix_count to unsigned long. |
| |
| * bgpd.c: Reconstruct all of VTY commands reflect internal |
| structure change. |
| Use bgplist instead of bgp_list. |
| Use peerlist intstead of peer_list. |
| |
| * bgp_attr.c (bgp_mp_reach_parse): If nlri_parse return -1, stop |
| parsing then return immediately. |
| |
| * bgp_route.c (nlri_parse): When NLRI parse error occured, return |
| -1. |
| (nlri_process): Use pcount_v4_{unicast,multicast}. |
| (nlri_delete): Likewise. |
| |
| 1999-11-25 Robert Olsson <Robert.Olsson@data.slu.se> |
| |
| * bgp_routemap.c (route_match_nlri): `match nlri |
| unicast|multicast' and `set nlri unicast|multicast' command are |
| added. |
| |
| 1999-11-22 Robert Olsson <Robert.Olsson@data.slu.se> |
| |
| * bgpd.c: Add translate-update support. |
| |
| * bgpd.h (TRANSLATE_UPDATE_OFF): Add translate-update definition. |
| |
| 1999-11-19 Robert.Olsson@data.slu.se |
| |
| * bgp_route.c (bgp_peer_delete): Add MBGP peer clear codes. |
| |
| 1999-11-14 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_open.c (bgp_capability_mp): Temporary comment out |
| SAFI_UNICAST_MULTICAST handling until we know the meanings. |
| |
| 1999-11-13 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_btoa.c: New file added. |
| |
| 1999-11-12 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgpd.h (struct peer): Add dont_capability flag. |
| (struct peer): Add override_capability flag. |
| |
| * bgpd.c (neighbor_dont_capability_negotiation): `neighbor PEER |
| dont-capability-negotiation' added. |
| |
| 1999-11-12 Bill Sommerfeld <sommerfeld@orchard.arlington.ma.us> |
| |
| * bgp_attr.c (bgp_mp_reach_parse): Ignore link-local addresses |
| attribute from non-shared-network peers. |
| |
| 1999-11-10 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_snmp.c: New file added. |
| |
| * BGP4-MIB.txt: Updated to the latest Internet-Draft |
| draft-ietf-idr-bgp4-mib-04.txt. |
| |
| 1999-11-09 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_route.c (bgp_route_init): Add `show ipv6 bgp prefix-list'. |
| |
| * bgp_attr.c (bgp_mp_unreach_parse): Enclose safi setup with |
| #ifdef HAVE_MBGPV4. |
| |
| 1999-11-08 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_dump.c (no_dump_bgp_all): Add [PATH] and [INTERVAL] to no |
| dump bgp commands. |
| (config_write_bgp_dump): Write interval value to the |
| configuration. |
| |
| 1999-11-07 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_zebra.c: Redistribute route-map support is added. |
| |
| * bgp_zebra.h: New file added. |
| |
| 1999-11-04 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_dump.c: BGP packet dump routine compatible with MRT. |
| * bgp_dump.h: BGP packet dump routine compatible with MRT. |
| |
| * bgp_debug.c: Renamed from bgp_dump.c |
| * bgp_debug.h: Renamed from bgp_dump.h |
| |
| 1999-10-27 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * BGP4-MIB.txt: New file added. Edited version of RFC1657. |
| |
| 1999-10-25 Bill Sommerfeld <sommerfeld@orchard.arlington.ma.us> |
| |
| * bgp_route.c (bgp_announce): If we're not on a shared network |
| with the peer and we don't have a link-local next hop, but the |
| inbound next-hop has a link-local address, don't readvertise it to |
| our peer. |
| |
| 1999-10-25 Marc Boucher <marc@mbsi.ca> |
| |
| * bgp_zebra.c: Add redistribute kernel command. |
| |
| 1999-10-25 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_route.c (bgp_reset): New function added. |
| |
| * bgpd.conf.sample2: Add IPv6 configuration sample. |
| |
| 1999-10-24 Bill Sommerfeld <sommerfeld@orchard.arlington.ma.us> |
| |
| * bgp_route.c (ipv6_aggregate_address): Function added. |
| |
| 1999-10-21 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_packet.c (bgp_update): Unintern aspath, community, cluster |
| list after parsing BGP update packet. |
| |
| * bgp_attr.c (bgp_attr_aspath): Intern parsed aspath. |
| (bgp_attr_community): Intern parsed community. |
| (bgp_attr_cluster_list): Intern parsed cluster list. |
| |
| * bgp_routemap.c: Add `set community-additive' command. |
| |
| 1999-10-21 Alexandr D. Kanevskiy <kad@blackcatlinux.com> |
| |
| * bgp_routemap.c (route_set_local_pref): Fix bug of setting |
| attribute flag. |
| |
| 1999-10-21 Bill Sommerfeld <sommerfeld@orchard.arlington.ma.us> |
| |
| * bgp_route.c (bgp_announce): Add check of IPv6 default route |
| announcement. |
| |
| * bgp_packet.c (bgp_update_send): Add BGP announcement logging. |
| |
| 1999-10-15 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * `show ip[v6] bgp PREFIX' show uptime of the route. |
| |
| 1999-10-04 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgpd.c (bgp_filter_set): Delete PEER_FAMILY_{IPV4,IPV6}. instead |
| of that use AF_INET and AF_INET6 directly. |
| (vty_clear_bgp): Add new function to support various clear ip bgp |
| method. |
| |
| 1999-10-04 Lars Fenneberg <lf@elemental.net> |
| |
| * bgpd.c (clear_ip_bgp): Add `clear ip bgp ASN'. |
| |
| 1999-10-03 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_routemap.c: Add `match ip prefix-list' and `match ipv6 |
| prefix-list'. |
| |
| 1999-09-28 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgpd.c (bgp_collision_detect): Add BGP collision detection |
| function. |
| |
| 1999-09-26 Blake Meike <bmeike@adero.com> |
| |
| * bgpd.c (neighbor_port): New command `neighbor PEER port PORT' is |
| added. |
| |
| 1999-08-24 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgpd.c (no_neighbor_timers_keepalive): Change MIN to min. Add |
| min() macro. |
| |
| 1999-08-19 Rick Payne <rickp@rossfell.co.uk> |
| |
| * bgp_packet.c (bgp_open): BGP holdtimer bug is fixed. Make BGP |
| keepalive timer configurable. |
| |
| 1999-08-15 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_zebra.c (bgp_redistribute_set): Fix redistribute bug. |
| |
| 1999-08-13 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgpd.c (bgp_peer_display): show ip bgp neighbors PEER only list |
| the peer not all of them. |
| |
| 1999-08-11 Rick Payne <rickp@rossfell.co.uk> |
| |
| * bgp_route.c (bgp_announce): Remove MED if its an EBGP peer - |
| will get overwritten by route-maps. |
| |
| 1999-08-08 Rick Payne <rickp@rossfell.co.uk> |
| |
| * bgp_routemap.c: Multi protocol route-map modification. |
| |
| 1999-08-01 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_route.c: Set network statement route's origin attribute as |
| igp. |
| |
| * bgp_zebra.c: Set redistribute route's origin attribute as |
| incomplete. |
| |
| * bgp_route.c (bgp_info_cmp): Add attribute existance check, |
| origin attribute check, BGP peer type check. |
| |
| 1999-07-30 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_route.c (bgp_peer_delete): Reselect of IPv6 route. |
| |
| 1999-07-29 Rick Payne <rickp@rossfell.co.uk> |
| |
| * Changed route-maps to behave in a more cisco-like fashion |
| |
| 1999-07-27 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_fsm.c (bgp_stop): Very serious bug of bgp_stop () is fixed. |
| When multiple route to the same destination exist, bgpd try to |
| announce the information to stopped peer. Then add orphan write |
| thread is added. This cause many strange behavior of bgpd. |
| Reported by Georg Hitsch <georg@atnet.at>. |
| |
| 1999-07-23 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgpd.c: Change peer's A.B.C.D to PEER. |
| |
| 1999-07-22 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_route.c (bgp_announce): Add hack for link-local nexthop. |
| |
| * bgp_zebra.c (bgp_zebra_announce): Fill in nexthop address from |
| local address. |
| |
| 1999-07-21 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_packet.c (bgp_open): Holdtime fetch bug is fixed. Reported |
| by Yuji SEKIYA <sekiya@sfc.wide.ad.jp>. |
| |
| 1999-07-15 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_fsm.c (fsm_holdtime): Don't close file descriptor in |
| fsm_holdtime (). |
| |
| 1999-07-11 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_routemap.c: Add `set atomic-aggregate' command. |
| |
| 1999-07-06 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_routemap.c (route_set_ip_nexthop_cmd): Change "ip nexthop" |
| to "ip next-hop". |
| |
| 1999-07-02 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_route.c (show_ipv6_bgp_regexp): `show ipv6 bgp regexp' |
| added. |
| |
| 1999-07-01 Rick Payne <rickp@rossfell.co.uk> |
| |
| * bgp_zebra.c (zebra_init): Install standard commands to |
| ZEBRA_NODE. |
| |
| 1999-06-28 Rick Payne <rickp@rossfell.co.uk> |
| |
| * bgpd.c (bgp_delete): bgp peer deletion bug is fixed. |
| |
| 1999-06-25 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgpd.c: Add neighbor update-source command as ALIAS to |
| neighbor_interface. |
| |
| 1999-06-19 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_attr.c (bgp_packet_attribute): Send community attribute when |
| send_community flag is set. |
| |
| * bgpd.h (struct peer): Add send_community flag. |
| |
| 1999-06-12 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgpd.c (router_bgp): router bgp's argument changed from AS_NO to |
| <1-65535>. |
| |
| 1999-06-08 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_route.h (struct bgp_info): Add subtype for BGP route type. |
| |
| 1999-06-07 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_community.c (community_merge): Function added. |
| |
| 1999-06-04 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_clist.c: New file. |
| * bgp_clist.h: New file. |
| |
| * bgp_community.h (COMMUNITY_LOCAL_AS): Added for Cisco |
| compatibility. |
| (COMMUNITY_NO_ADVERTISE): Fix typo. |
| |
| 1999-05-30 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_routemap.c: Add `set weight WEIGHT' command. |
| |
| * bgpd.c: Remove all_digit_check function. Instead of that use |
| all_digit function in lib/prefix.c. |
| |
| * bgp_routemap.c (bgp_route_map_init): Install |
| no_set_ipv6_nexthop_global_cmd and no_set_ipv6_nexthop_local_cmd |
| element to the RMAP_NODE. |
| |
| 1999-05-28 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_aspath.c (aspath_make_str): Declare aspath_delimiter_char |
| inside aspath_make_str function. |
| (aspath_prepend): New function is added for AS path prepend. |
| (aspath_make_str_count): Renamed from aspath_make_str. AS path |
| count is set to the structure. |
| (aspath_merge): New function. |
| |
| 1999-05-22 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_zebra.c (redistribute_bgp): Add new DEFUN. |
| (no_redistribute_bgp): Likewise. |
| (router_zebra): Semantics changed. Now 'router zebra' is default |
| behavior of bgpd. |
| |
| 1999-05-14 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_routemap.c: Add some commands to bgp route-map. |
| match ip next-hop: New command. |
| match metric: New command. |
| set metric: Doc fix. |
| set local-preference: Add DEFUN. |
| |
| 1999-05-14 Stephen R. van den Berg <srb@cuci.nl> |
| |
| * bgp_main.c (signal_init): SIGTERM call sigint. |
| (sigint): Loggging more better message. |
| |
| 1999-05-12 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_attr.c (bgp_packet_attribute): AS path attribute extended |
| length bit check is added. |
| |
| 1999-05-11 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_routemap.c (bgp_route_map_init): Call route_map_install_set |
| function with route_set_local_pref_cmd argument. |
| (no_match_aspath): Function added. |
| (route_set_metric): Set attribute flag bit. |
| |
| * bgp_attr.c (bgp_packet_attribute): MULTI_EXIT_DISC is now in BGP |
| packet. |
| |
| 1999-05-07 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgpd.c (no_neighbor_timers_holdtime): `no neighbor PEER timers |
| holdtime' command is added. |
| |
| * bgpd.h (BGP_DEFAULT_HOLDTIME_BIG): Delete define. |
| |
| * bgpd.c (bgp_prefix_list_set): New function added. |
| (bgp_prefix_list_unset): Likewise. |
| (bgp_prefix_list_update): Likewise. |
| (show_ip_bgp_neighbors): prefix-list information display. |
| |
| 1999-05-06 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgpd.c (bgp_delete): Function added for `no router bgp'. |
| |
| 1999-05-05 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_dump.c (bgp_dump_attr): Add originator_id display. |
| |
| * bgpd.c (bgp_router_id): Even when address is malformed set the |
| value to configuration bug fixed. |
| (no_bgp_router_id): New function. |
| (no_bgp_cluster_id): New function. |
| |
| 1999-05-04 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgpd.h (BGP_ATTR_ORIGINATOR_ID): Changed from BGP_ATTR_ORIGINATOR. |
| |
| 1999-05-02 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_route.c (bgp_announce): Add route reflector check. |
| |
| 1999-05-01 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgpd.c (bgp_cluster_id): Add function for route reflector. |
| (neighbor_route_reflector_client): Likewise. |
| (no_neighbor_route_reflector_client): Likewise. |
| |
| * bgpd.h (struct bgp ): Add cluster for route reflector. |
| |
| * bgp_route.c (show_ip_bgp_prefix_list): New command is added. |
| |
| 1999-04-24 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * Makefile.am (noinst_HEADERS): Add bgp_filter.h |
| |
| * bgp_aspath.c (aspath_undup): Function deleted. aspath_free () |
| has same functionality. |
| |
| * bgp_filter.h: New file. |
| |
| * bgp_aspath.c (aspath_unintern): Rename aspath_free () to |
| aspath_unintern () |
| (aspath_free): New function. |
| |
| 1999-04-23 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_aspath.c (aspath_aggregate): Function added. |
| |
| * bgp_aspath.h (aspath_aggregate): Prototype added. |
| |
| * bgp_aspath.c (aspath_empty_aspath): New argument |
| gated_dont_eat_flag is added. |
| |
| 1999-04-18 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_route.c: Add bgp_aggregate_ipv4 and bgp_aggregate_ipv6. |
| |
| 1999-04-17 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_route.c (aggregate_address): Function added. |
| |
| * bgp_zebra.c (zebra_read): Change log to zlog. |
| |
| 1999-04-15 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * Makefile.am (noninst_HEADERS): Added for make dist. |
| |
| 1999-04-09 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * aspath_regex.c: Removed from distribution. |
| |
| 1999-04-07 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_attr.c (bgp_packet_attribute): Old draft-00 packet treatment |
| bug fixed. |
| |
| 1999-04-06 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_aspath.c (aspath_add_left): Fix empty aspath bug. Reported |
| by kad@gibson.skif.net. |
| |
| * bgp_regex.[ch]: New file added. |
| |
| |
| 1999-04-05 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_filter.c: New file added. |
| |
| 1999-04-01 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_aspath.c (aspath_empty_aspath): Change for peering with |
| gated. |
| |
| 1999-03-24 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_main.c (main): Default loggin method changed from syslog to |
| stdout. |
| |
| 1999-03-05 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_route.c: Delete obsolete default attribute DEFUN. |
| |
| 1999-03-04 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_attr.c: Make attribute structure put into attribute hash. |
| |
| 1999-03-02 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_view.c : Delete file. |
| |
| 1999-02-25 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_routemap.c (bgp_apply_route_map): Add prefix argument. |
| |
| * bgp_route.h (struct bgp_info): Add bgp_info structre. I'll |
| replace bgp_route with this. |
| |
| * bgp_routemap.c (route_match_ip_address): Fix bug of passing non |
| prefix value to access_list_apply(). |
| |
| * bgpd.conf.sample: Add route-map sample. |
| Delete obsolete default-attr statements. |
| |
| * bgp_packet.c: Use stream_fifo for packet queueing. |
| |
| 1999-02-24 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_aspath.c (aspath_add_left): add non empty aspath treatment. |
| |
| * bgp_main.c: include unistd.h for daemon(). |
| |
| * bgp_route.c (nlri_process): add IPv6 table lookup. |
| |
| * bgp_attr.c (route_parse_ipv6): call nlri_process(). |
| (attr_make): Obsolete function attr_make deleted. |
| |
| 1999-02-22 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_aspath.c (aspath_add_left): change function name from |
| aspath_add_leftmost_as(). |
| |
| 1999-02-21 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_aspath.c: add aspath_add_leftmost_as (). |
| |
| 1999-02-18 Peter Galbavy <Peter.Galbavy@knowledge.com> |
| |
| * syslog support added |
| |
| 1999-01-26 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgpd.c: DEFUN (neighbor_nexthop): deleted. |
| DEFUN (neighbor_distribute_list): added. |
| |
| 1999-01-19 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgpd.h (struct peer ): header_buf and read_buf is removed. |
| |
| * bgp_peer.[ch]: Deleted. Peer related functions are merged to |
| bgpd.c |
| |
| * bgp_network.c: New file. |
| * bgp_network.h: New file. |
| |
| * bgp_packet.h: New file. |
| |
| 1999-01-11 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_packet.c (bgp_keepalive_send): Now BGP keepalive packet is |
| buffered. |
| |
| 1999-01-08 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_packet.c: New file. |
| |
| 1998-12-22 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_zebra.c (zebra_client): Use zebra_connect() in lib/client.c. |
| |
| * `show ip bgp' bug fixed. |
| * aspath_log (): Remove argument logfp. |
| |
| 1998-12-15 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_fsm.h: New file. |
| |
| 1998-12-15 Magnus Ahltorp <map@stacken.kth.se> |
| |
| * bgp_attr.c, bgp_community.h, bgp_dump.c, bgp_fsm.c, bgp_open.c |
| bgp_peer.c, bgp_peer.h, bgp_route.c, bgp_route.h, bgp_view.c |
| bgpd.c, bgpd.h, bgp_attr.c, bgp_community.h, bgp_dump.c, |
| bgp_fsm.c, bgp_open.c, bgp_peer.c, bgp_peer.h: Prototype fixes. |
| |
| 1998-12-09 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgpd.c (bgp_config_write): Delete vector v argument. |
| |
| 1998-12-07 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgpd.h: Delete annoying ld_[124]byte and st_[124]byte macros. |
| |
| 1998-11-23 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_radix.[ch]: removed. |
| |
| 1998-09-15 HEO SeonMeyong <seirios@matrix.iri.co.jp> |
| |
| * bgp_main.c: ifdef HYDRANGEA -> ifdef KAME |
| |
| 1998-08-13 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_dump.c: delete nroute(). |
| |
| 1998-05-19 Yamshita TAKAO <jargon@lares.dti.ne.jp> |
| |
| * bgp_aspath.c: HAVE_CONFIG_H typo :-) |
| * bgpd.h: Modify for compile on Solaris. |
| * bgp_aspath.h: likewize |
| * bgp_community.h: likewize |
| * bgp_routemap.c: likewize |
| |
| 1998-05-18 Yamshita TAKAO <jargon@lares.dti.ne.jp> |
| |
| * bgpd.h: Modify for compile on Solaris. |
| * bgp_aspath.h: likewize |
| |
| 1998-05-08 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * routemap.[ch]: move to ../lib directory. |
| |
| 1998-05-07 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * routemap.c (route_map_apply): add function. |
| |
| 1998-05-06 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * routemap.h: add file. |
| |
| * bgp_peer.h (enum ): change PEER_{IBGP,EBGP} to BGP_PEER_{IBGP,EBGP} |
| |
| 1998-05-03 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * Makefile.am: sysconfdir_DATA added. |
| |
| 1998-05-02 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_dump.c: add `debug bgp fsm' |
| add `no debug bgp fsm' |
| add `show debug bgp' |
| * bgp_open.c: File added. |
| |
| 1998-05-01 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * .cvsignore: File added. |
| |
| 1998-04-30 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_community.[ch]: File added. |
| |
| 1998-03-04 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgpd now use lib/thread.[ch]. |
| |
| 1998-01-06 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgpd.c (show_ip_bgp_neighbors): add 'show ip bgp neighbors' command. |
| |
| * bgpd.h (BGP_DEFAULT_START_TIMER): change from 1 to 30. |
| |
| 1997-12-30 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_vty.c: bgp_vty.c deleted. |
| |
| * bgpd.c (config_write_neighbor): add ebgp-multihop command. |
| |
| 1997-12-29 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_fsm.c: [-p bgp_port] and [-P vty_port] works |
| |
| 1997-12-06 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_vty.c: new file. |
| |
| * bgp_attr.c: add new logging system. |
| |
| 1997-11-23 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * Change all inet_addr call into inet_aton. |
| |
| 1997-11-10 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_radix.c: change radix_peer_delete |
| |
| 1997-10-04 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_aspath.c: move AS_TOKEN_??? definition from header to c source. |
| |
| 1997-09-12 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_dump.c (bgp_log_route): add dump_attr function |
| |
| 1997-09-06 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_aspath.c (aspath_test): change AS_SET brace from '[' to '{' |
| * bgp_dump.c (bgp_log_route): change logfile format. |
| |
| 1997-08-19 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_open.c (bgp_open): move bgp_open function from bgpd.c |
| * bgp_attr.c (community_str2com): add community value generation |
| * bgp_attr.h: add SAFI definition for BGP-4+ |
| |
| 1997-08-18 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgpd.h: add BGP_OPEN_OPT_CAP for Capabilities Optional Parameter |
| * Makefile.in: add bgp_open.o, delete bgp_loop.o |
| * bgp_open.c: newfile which manages BGP Open message |
| * bgp_loop.c: this file is merged with bgp_fsm.c |
| * bgp_radix.c (radix_add): radix_add() now return route_t instead |
| of int |
| (bgp_sim): now we can read update & withdraw from file |
| * bgp_route.c: add route_free() call into route_parse etc. |
| |
| 1997-08-17 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_radix.c: Radix code is completely rewritten. It has better |
| memory treatment than old one. |
| |
| 1997-08-14 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_route.c: route_alloc for route struct allocation statistics. |
| * bgpd.c (bgp_make_update): now we cann announce MED attribute. |
| * bgp_aspath.c (aspath_print_all): change aspath_print_all output |
| format. |
| |
| 1997-08-13 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_term.c (term_parse): add command : show asstat, show ashash |
| * bgp_aspath.c: aspath_cmp bug fix |
| (aspath_print_all): add aspath_print_all (); |
| * bgp_peer.h: delete rlist element from struct peer. |
| |
| 1997-08-12 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_aspath.c: completely rewritten. |
| * bgp_aspath.h: completely rewritten. |
| add AsPath, AsSegment structure |
| add AS_SET treatment |
| change Hash codes |
| |
| 1997-08-09 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_attr.h: add Attribute flags defines |
| * bgp_route.c: delete rlist related functions |
| * bgp_aspath.c (as_origin): add as_origin function |
| (aspath_print): move from bgp_dump.c and add support of AS_SET |
| change Hash related function names. |
| |
| 1997-08-08 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_aspath.h: add next entry, delete rlist entry from struct aspath |
| |
| 1997-08-04 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * bgp_aspath.c (as_sort): add function as_sort |
| * bgp_aspath.h: add IBGP, EBGP |
| |