| /* |
| * This is an implementation of draft-katz-yeung-ospf-traffic-06.txt |
| * Copyright (C) 2001 KDD R&D Laboratories, Inc. |
| * http://www.kddlabs.co.jp/ |
| * |
| * This file is part of GNU Zebra. |
| * |
| * GNU Zebra is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2, or (at your option) any |
| * later version. |
| * |
| * GNU Zebra is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with GNU Zebra; see the file COPYING. If not, write to the Free |
| * Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA |
| * 02111-1307, USA. |
| */ |
| |
| /***** MTYPE definition is not reflected to "memory.h" yet. *****/ |
| #define MTYPE_OSPF_MPLS_TE_LINKPARAMS MTYPE_TMP |
| |
| #include <zebra.h> |
| |
| #include "linklist.h" |
| #include "prefix.h" |
| #include "if.h" |
| #include "table.h" |
| #include "memory.h" |
| #include "command.h" |
| #include "vty.h" |
| #include "stream.h" |
| #include "log.h" |
| #include "thread.h" |
| #include "hash.h" |
| #include "sockunion.h" /* for inet_aton() */ |
| |
| #include "ospfd/ospfd.h" |
| #include "ospfd/ospf_interface.h" |
| #include "ospfd/ospf_ism.h" |
| #include "ospfd/ospf_asbr.h" |
| #include "ospfd/ospf_lsa.h" |
| #include "ospfd/ospf_lsdb.h" |
| #include "ospfd/ospf_neighbor.h" |
| #include "ospfd/ospf_nsm.h" |
| #include "ospfd/ospf_flood.h" |
| #include "ospfd/ospf_packet.h" |
| #include "ospfd/ospf_spf.h" |
| #include "ospfd/ospf_dump.h" |
| #include "ospfd/ospf_route.h" |
| #include "ospfd/ospf_ase.h" |
| #include "ospfd/ospf_zebra.h" |
| #include "ospfd/ospf_te.h" |
| |
| /* Following structure are internal use only. */ |
| struct ospf_mpls_te |
| { |
| enum { disabled, enabled } status; |
| |
| /* List elements are zebra-interfaces (ifp), not ospf-interfaces (oi). */ |
| struct list *iflist; |
| |
| /* Store Router-TLV in network byte order. */ |
| struct te_tlv_router_addr router_addr; |
| }; |
| |
| struct mpls_te_link |
| { |
| /* |
| * According to MPLS-TE (draft) specification, 24-bit Opaque-ID field |
| * is subdivided into 8-bit "unused" field and 16-bit "instance" field. |
| * In this implementation, each Link-TLV has its own instance. |
| */ |
| u_int32_t instance; |
| |
| /* Reference pointer to a Zebra-interface. */ |
| struct interface *ifp; |
| |
| /* Area info in which this MPLS-TE link belongs to. */ |
| struct ospf_area *area; |
| |
| /* Flags to manage this link parameters. */ |
| u_int32_t flags; |
| #define LPFLG_LOOKUP_DONE 0x1 |
| #define LPFLG_LSA_ENGAGED 0x2 |
| #define LPFLG_LSA_FORCED_REFRESH 0x4 |
| |
| /* Store Link-TLV in network byte order. */ |
| struct te_tlv_link link_header; |
| struct te_link_subtlv_link_type link_type; |
| struct te_link_subtlv_link_id link_id; |
| struct te_link_subtlv_lclif_ipaddr *lclif_ipaddr; |
| struct te_link_subtlv_rmtif_ipaddr *rmtif_ipaddr; |
| struct te_link_subtlv_te_metric te_metric; |
| struct te_link_subtlv_max_bw max_bw; |
| struct te_link_subtlv_max_rsv_bw max_rsv_bw; |
| struct te_link_subtlv_unrsv_bw unrsv_bw; |
| struct te_link_subtlv_rsc_clsclr rsc_clsclr; |
| }; |
| |
| /* |
| * Global variable to manage Opaque-LSA/MPLS-TE on this node. |
| * Note that all parameter values are stored in network byte order. |
| */ |
| static struct ospf_mpls_te OspfMplsTE; |
| |
| enum oifstate { |
| OI_ANY, OI_DOWN, OI_UP |
| }; |
| |
| enum sched_opcode { |
| REORIGINATE_PER_AREA, REFRESH_THIS_LSA, FLUSH_THIS_LSA |
| }; |
| |
| /*------------------------------------------------------------------------* |
| * Followings are initialize/terminate functions for MPLS-TE handling. |
| *------------------------------------------------------------------------*/ |
| |
| static int ospf_mpls_te_new_if (struct interface *ifp); |
| static int ospf_mpls_te_del_if (struct interface *ifp); |
| static void ospf_mpls_te_ism_change (struct ospf_interface *oi, int old_status); |
| static void ospf_mpls_te_nsm_change (struct ospf_neighbor *nbr, int old_status); |
| static void ospf_mpls_te_config_write_router (struct vty *vty); |
| static void ospf_mpls_te_config_write_if (struct vty *vty, struct interface *ifp); |
| static void ospf_mpls_te_show_info (struct vty *vty, struct ospf_lsa *lsa); |
| static int ospf_mpls_te_lsa_originate (void *arg); |
| static struct ospf_lsa *ospf_mpls_te_lsa_refresh (struct ospf_lsa *lsa); |
| static void ospf_mpls_te_lsa_schedule (struct mpls_te_link *lp, enum sched_opcode); |
| |
| static void del_mpls_te_link (void *val); |
| static void ospf_mpls_te_register_vty (void); |
| |
| int |
| ospf_mpls_te_init (void) |
| { |
| int rc; |
| |
| rc = ospf_register_opaque_functab ( |
| OSPF_OPAQUE_AREA_LSA, |
| OPAQUE_TYPE_TRAFFIC_ENGINEERING_LSA, |
| ospf_mpls_te_new_if, |
| ospf_mpls_te_del_if, |
| ospf_mpls_te_ism_change, |
| ospf_mpls_te_nsm_change, |
| ospf_mpls_te_config_write_router, |
| ospf_mpls_te_config_write_if, |
| NULL,/* ospf_mpls_te_config_write_debug */ |
| ospf_mpls_te_show_info, |
| ospf_mpls_te_lsa_originate, |
| ospf_mpls_te_lsa_refresh, |
| NULL,/* ospf_mpls_te_new_lsa_hook */ |
| NULL /* ospf_mpls_te_del_lsa_hook */); |
| if (rc != 0) |
| { |
| zlog_warn ("ospf_mpls_te_init: Failed to register functions"); |
| goto out; |
| } |
| |
| memset (&OspfMplsTE, 0, sizeof (struct ospf_mpls_te)); |
| OspfMplsTE.status = disabled; |
| OspfMplsTE.iflist = list_new (); |
| OspfMplsTE.iflist->del = del_mpls_te_link; |
| |
| ospf_mpls_te_register_vty (); |
| |
| out: |
| return rc; |
| } |
| |
| void |
| ospf_mpls_te_term (void) |
| { |
| list_delete (OspfMplsTE.iflist); |
| |
| OspfMplsTE.iflist = NULL; |
| OspfMplsTE.status = disabled; |
| |
| ospf_delete_opaque_functab (OSPF_OPAQUE_AREA_LSA, |
| OPAQUE_TYPE_TRAFFIC_ENGINEERING_LSA); |
| return; |
| } |
| |
| /*------------------------------------------------------------------------* |
| * Followings are control functions for MPLS-TE parameters management. |
| *------------------------------------------------------------------------*/ |
| |
| static void |
| del_mpls_te_link (void *val) |
| { |
| XFREE (MTYPE_OSPF_MPLS_TE_LINKPARAMS, val); |
| return; |
| } |
| |
| static u_int32_t |
| get_mpls_te_instance_value (void) |
| { |
| static u_int32_t seqno = 0; |
| |
| if (seqno < MAX_LEGAL_TE_INSTANCE_NUM ) |
| seqno += 1; |
| else |
| seqno = 1; /* Avoid zero. */ |
| |
| return seqno; |
| } |
| |
| static struct ospf_interface * |
| lookup_oi_by_ifp (struct interface *ifp, |
| struct ospf_area *area, enum oifstate oifstate) |
| { |
| struct ospf_interface *oi = NULL; |
| struct route_node *rn; |
| |
| for (rn = route_top (IF_OIFS (ifp)); rn; rn = route_next (rn)) |
| { |
| if ((oi = rn->info) == NULL) |
| continue; |
| |
| switch (oifstate) |
| { |
| case OI_ANY: |
| break; |
| case OI_DOWN: |
| if (ospf_if_is_enable (oi)) |
| continue; |
| break; |
| case OI_UP: |
| if (! ospf_if_is_enable (oi)) |
| continue; |
| break; |
| default: |
| zlog_warn ("lookup_oi_by_ifp: Unknown oifstate: %x", oifstate); |
| goto out; |
| } |
| |
| if (area == NULL || oi->area == area) |
| return oi; |
| } |
| out: |
| return NULL; |
| } |
| |
| static struct mpls_te_link * |
| lookup_linkparams_by_ifp (struct interface *ifp) |
| { |
| struct listnode *node, *nnode; |
| struct mpls_te_link *lp; |
| |
| for (ALL_LIST_ELEMENTS (OspfMplsTE.iflist, node, nnode, lp)) |
| if (lp->ifp == ifp) |
| return lp; |
| |
| return NULL; |
| } |
| |
| static struct mpls_te_link * |
| lookup_linkparams_by_instance (struct ospf_lsa *lsa) |
| { |
| struct listnode *node; |
| struct mpls_te_link *lp; |
| unsigned int key = GET_OPAQUE_ID (ntohl (lsa->data->id.s_addr)); |
| |
| for (ALL_LIST_ELEMENTS_RO (OspfMplsTE.iflist, node, lp)) |
| if (lp->instance == key) |
| return lp; |
| |
| zlog_warn ("lookup_linkparams_by_instance: Entry not found: key(%x)", key); |
| return NULL; |
| } |
| |
| static void |
| ospf_mpls_te_foreach_area ( |
| void (*func)(struct mpls_te_link *lp, enum sched_opcode), |
| enum sched_opcode sched_opcode) |
| { |
| struct listnode *node, *nnode; |
| struct listnode *node2; |
| struct mpls_te_link *lp; |
| struct ospf_area *area; |
| |
| for (ALL_LIST_ELEMENTS (OspfMplsTE.iflist, node, nnode, lp)) |
| { |
| if ((area = lp->area) == NULL) |
| continue; |
| if (lp->flags & LPFLG_LOOKUP_DONE) |
| continue; |
| |
| if (func != NULL) |
| (* func)(lp, sched_opcode); |
| |
| for (node2 = listnextnode (node); node2; node2 = listnextnode (node2)) |
| if ((lp = listgetdata (node2)) != NULL) |
| if (lp->area != NULL) |
| if (IPV4_ADDR_SAME (&lp->area->area_id, &area->area_id)) |
| lp->flags |= LPFLG_LOOKUP_DONE; |
| } |
| |
| for (ALL_LIST_ELEMENTS_RO (OspfMplsTE.iflist, node, lp)) |
| if (lp->area != NULL) |
| lp->flags &= ~LPFLG_LOOKUP_DONE; |
| |
| return; |
| } |
| |
| static void |
| set_mpls_te_router_addr (struct in_addr ipv4) |
| { |
| OspfMplsTE.router_addr.header.type = htons (TE_TLV_ROUTER_ADDR); |
| OspfMplsTE.router_addr.header.length = htons (sizeof (ipv4)); |
| OspfMplsTE.router_addr.value = ipv4; |
| return; |
| } |
| |
| static void |
| set_linkparams_link_header (struct mpls_te_link *lp) |
| { |
| struct te_tlv_header *tlvh; |
| u_int16_t length = 0; |
| |
| /* TE_LINK_SUBTLV_LINK_TYPE */ |
| if (ntohs (lp->link_type.header.type) != 0) |
| length += TLV_SIZE (&lp->link_type.header); |
| |
| /* TE_LINK_SUBTLV_LINK_ID */ |
| if (ntohs (lp->link_id.header.type) != 0) |
| length += TLV_SIZE (&lp->link_id.header); |
| |
| /* TE_LINK_SUBTLV_LCLIF_IPADDR */ |
| if ((tlvh = (struct te_tlv_header *) lp->lclif_ipaddr) != NULL |
| && ntohs (tlvh->type) != 0) |
| length += TLV_SIZE (tlvh); |
| |
| /* TE_LINK_SUBTLV_RMTIF_IPADDR */ |
| if ((tlvh = (struct te_tlv_header *) lp->rmtif_ipaddr) != NULL |
| && ntohs (tlvh->type) != 0) |
| length += TLV_SIZE (tlvh); |
| |
| /* TE_LINK_SUBTLV_TE_METRIC */ |
| if (ntohs (lp->te_metric.header.type) != 0) |
| length += TLV_SIZE (&lp->te_metric.header); |
| |
| /* TE_LINK_SUBTLV_MAX_BW */ |
| if (ntohs (lp->max_bw.header.type) != 0) |
| length += TLV_SIZE (&lp->max_bw.header); |
| |
| /* TE_LINK_SUBTLV_MAX_RSV_BW */ |
| if (ntohs (lp->max_rsv_bw.header.type) != 0) |
| length += TLV_SIZE (&lp->max_rsv_bw.header); |
| |
| /* TE_LINK_SUBTLV_UNRSV_BW */ |
| if (ntohs (lp->unrsv_bw.header.type) != 0) |
| length += TLV_SIZE (&lp->unrsv_bw.header); |
| |
| /* TE_LINK_SUBTLV_RSC_CLSCLR */ |
| if (ntohs (lp->rsc_clsclr.header.type) != 0) |
| length += TLV_SIZE (&lp->rsc_clsclr.header); |
| |
| lp->link_header.header.type = htons (TE_TLV_LINK); |
| lp->link_header.header.length = htons (length); |
| |
| return; |
| } |
| |
| static void |
| set_linkparams_link_type (struct ospf_interface *oi, struct mpls_te_link *lp) |
| { |
| lp->link_type.header.type = htons (TE_LINK_SUBTLV_LINK_TYPE); |
| lp->link_type.header.length = htons (sizeof (lp->link_type.link_type.value)); |
| |
| switch (oi->type) |
| { |
| case OSPF_IFTYPE_POINTOPOINT: |
| lp->link_type.link_type.value = LINK_TYPE_SUBTLV_VALUE_PTP; |
| break; |
| case OSPF_IFTYPE_BROADCAST: |
| case OSPF_IFTYPE_NBMA: |
| lp->link_type.link_type.value = LINK_TYPE_SUBTLV_VALUE_MA; |
| break; |
| default: |
| /* Not supported yet. *//* XXX */ |
| lp->link_type.header.type = htons (0); |
| break; |
| } |
| return; |
| } |
| |
| static void |
| set_linkparams_link_id (struct ospf_interface *oi, struct mpls_te_link *lp) |
| { |
| struct ospf_neighbor *nbr; |
| int done = 0; |
| |
| lp->link_id.header.type = htons (TE_LINK_SUBTLV_LINK_ID); |
| lp->link_id.header.length = htons (sizeof (lp->link_id.value)); |
| |
| /* |
| * The Link ID is identical to the contents of the Link ID field |
| * in the Router LSA for these link types. |
| */ |
| switch (oi->type) |
| { |
| case OSPF_IFTYPE_POINTOPOINT: |
| /* Take the router ID of the neighbor. */ |
| if ((nbr = ospf_nbr_lookup_ptop (oi)) |
| && nbr->state == NSM_Full) |
| { |
| lp->link_id.value = nbr->router_id; |
| done = 1; |
| } |
| break; |
| case OSPF_IFTYPE_BROADCAST: |
| case OSPF_IFTYPE_NBMA: |
| /* Take the interface address of the designated router. */ |
| if ((nbr = ospf_nbr_lookup_by_addr (oi->nbrs, &DR (oi))) == NULL) |
| break; |
| |
| if (nbr->state == NSM_Full |
| || (IPV4_ADDR_SAME (&oi->address->u.prefix4, &DR (oi)) |
| && ospf_nbr_count (oi, NSM_Full) > 0)) |
| { |
| lp->link_id.value = DR (oi); |
| done = 1; |
| } |
| break; |
| default: |
| /* Not supported yet. *//* XXX */ |
| lp->link_id.header.type = htons (0); |
| break; |
| } |
| |
| if (! done) |
| { |
| struct in_addr mask; |
| masklen2ip (oi->address->prefixlen, &mask); |
| lp->link_id.value.s_addr = oi->address->u.prefix4.s_addr & mask.s_addr; |
| } |
| return; |
| } |
| |
| static void |
| set_linkparams_te_metric (struct mpls_te_link *lp, u_int32_t te_metric) |
| { |
| lp->te_metric.header.type = htons (TE_LINK_SUBTLV_TE_METRIC); |
| lp->te_metric.header.length = htons (sizeof (lp->te_metric.value)); |
| lp->te_metric.value = htonl (te_metric); |
| return; |
| } |
| |
| static void |
| set_linkparams_max_bw (struct mpls_te_link *lp, float *fp) |
| { |
| lp->max_bw.header.type = htons (TE_LINK_SUBTLV_MAX_BW); |
| lp->max_bw.header.length = htons (sizeof (lp->max_bw.value)); |
| htonf (fp, &lp->max_bw.value); |
| return; |
| } |
| |
| static void |
| set_linkparams_max_rsv_bw (struct mpls_te_link *lp, float *fp) |
| { |
| lp->max_rsv_bw.header.type = htons (TE_LINK_SUBTLV_MAX_RSV_BW); |
| lp->max_rsv_bw.header.length = htons (sizeof (lp->max_rsv_bw.value)); |
| htonf (fp, &lp->max_rsv_bw.value); |
| return; |
| } |
| |
| static void |
| set_linkparams_unrsv_bw (struct mpls_te_link *lp, int priority, float *fp) |
| { |
| /* Note that TLV-length field is the size of array. */ |
| lp->unrsv_bw.header.type = htons (TE_LINK_SUBTLV_UNRSV_BW); |
| lp->unrsv_bw.header.length = htons (sizeof (lp->unrsv_bw.value)); |
| htonf (fp, &lp->unrsv_bw.value [priority]); |
| return; |
| } |
| |
| static void |
| set_linkparams_rsc_clsclr (struct mpls_te_link *lp, u_int32_t classcolor) |
| { |
| lp->rsc_clsclr.header.type = htons (TE_LINK_SUBTLV_RSC_CLSCLR); |
| lp->rsc_clsclr.header.length = htons (sizeof (lp->rsc_clsclr.value)); |
| lp->rsc_clsclr.value = htonl (classcolor); |
| return; |
| } |
| |
| static void |
| initialize_linkparams (struct mpls_te_link *lp) |
| { |
| struct interface *ifp = lp->ifp; |
| struct ospf_interface *oi; |
| float fval; |
| int i; |
| |
| if ((oi = lookup_oi_by_ifp (ifp, NULL, OI_ANY)) == NULL) |
| return; |
| |
| /* |
| * Try to set initial values those can be derived from |
| * zebra-interface information. |
| */ |
| set_linkparams_link_type (oi, lp); |
| |
| /* |
| * Linux and *BSD kernel holds bandwidth parameter as an "int" type. |
| * We may have to reconsider, if "ifp->bandwidth" type changes to float. |
| */ |
| fval = (float)((ifp->bandwidth ? ifp->bandwidth |
| : OSPF_DEFAULT_BANDWIDTH) * 1000 / 8); |
| |
| set_linkparams_max_bw (lp, &fval); |
| set_linkparams_max_rsv_bw (lp, &fval); |
| |
| for (i = 0; i < 8; i++) |
| set_linkparams_unrsv_bw (lp, i, &fval); |
| |
| return; |
| } |
| |
| static int |
| is_mandated_params_set (struct mpls_te_link *lp) |
| { |
| int rc = 0; |
| |
| if (ntohs (OspfMplsTE.router_addr.header.type) == 0) |
| goto out; |
| |
| if (ntohs (lp->link_type.header.type) == 0) |
| goto out; |
| |
| if (ntohs (lp->link_id.header.type) == 0) |
| goto out; |
| |
| rc = 1; |
| out: |
| return rc; |
| } |
| |
| /*------------------------------------------------------------------------* |
| * Followings are callback functions against generic Opaque-LSAs handling. |
| *------------------------------------------------------------------------*/ |
| |
| static int |
| ospf_mpls_te_new_if (struct interface *ifp) |
| { |
| struct mpls_te_link *new; |
| int rc = -1; |
| |
| if (lookup_linkparams_by_ifp (ifp) != NULL) |
| { |
| zlog_warn ("ospf_mpls_te_new_if: ifp(%p) already in use?", (void *)ifp); |
| rc = 0; /* Do nothing here. */ |
| goto out; |
| } |
| |
| new = XCALLOC (MTYPE_OSPF_MPLS_TE_LINKPARAMS, |
| sizeof (struct mpls_te_link)); |
| if (new == NULL) |
| { |
| zlog_warn ("ospf_mpls_te_new_if: XMALLOC: %s", safe_strerror (errno)); |
| goto out; |
| } |
| |
| new->area = NULL; |
| new->flags = 0; |
| new->instance = get_mpls_te_instance_value (); |
| new->ifp = ifp; |
| |
| initialize_linkparams (new); |
| |
| listnode_add (OspfMplsTE.iflist, new); |
| |
| /* Schedule Opaque-LSA refresh. *//* XXX */ |
| |
| rc = 0; |
| out: |
| return rc; |
| } |
| |
| static int |
| ospf_mpls_te_del_if (struct interface *ifp) |
| { |
| struct mpls_te_link *lp; |
| int rc = -1; |
| |
| if ((lp = lookup_linkparams_by_ifp (ifp)) != NULL) |
| { |
| struct list *iflist = OspfMplsTE.iflist; |
| |
| /* Dequeue listnode entry from the list. */ |
| listnode_delete (iflist, lp); |
| |
| /* Avoid misjudgement in the next lookup. */ |
| if (listcount (iflist) == 0) |
| iflist->head = iflist->tail = NULL; |
| |
| XFREE (MTYPE_OSPF_MPLS_TE_LINKPARAMS, lp); |
| } |
| |
| /* Schedule Opaque-LSA refresh. *//* XXX */ |
| |
| rc = 0; |
| /*out:*/ |
| return rc; |
| } |
| |
| static void |
| ospf_mpls_te_ism_change (struct ospf_interface *oi, int old_state) |
| { |
| struct te_link_subtlv_link_type old_type; |
| struct te_link_subtlv_link_id old_id; |
| struct mpls_te_link *lp; |
| |
| if ((lp = lookup_linkparams_by_ifp (oi->ifp)) == NULL) |
| { |
| zlog_warn ("ospf_mpls_te_ism_change: Cannot get linkparams from OI(%s)?", IF_NAME (oi)); |
| goto out; |
| } |
| if (oi->area == NULL || oi->area->ospf == NULL) |
| { |
| zlog_warn ("ospf_mpls_te_ism_change: Cannot refer to OSPF from OI(%s)?", |
| IF_NAME (oi)); |
| goto out; |
| } |
| #ifdef notyet |
| if ((lp->area != NULL |
| && ! IPV4_ADDR_SAME (&lp->area->area_id, &oi->area->area_id)) |
| || (lp->area != NULL && oi->area == NULL)) |
| { |
| /* How should we consider this case? */ |
| zlog_warn ("MPLS-TE: Area for OI(%s) has changed to [%s], flush previous LSAs", IF_NAME (oi), oi->area ? inet_ntoa (oi->area->area_id) : "N/A"); |
| ospf_mpls_te_lsa_schedule (lp, FLUSH_THIS_LSA); |
| } |
| #endif |
| /* Keep Area information in conbination with linkparams. */ |
| lp->area = oi->area; |
| |
| switch (oi->state) |
| { |
| case ISM_PointToPoint: |
| case ISM_DROther: |
| case ISM_Backup: |
| case ISM_DR: |
| old_type = lp->link_type; |
| old_id = lp->link_id; |
| |
| set_linkparams_link_type (oi, lp); |
| set_linkparams_link_id (oi, lp); |
| |
| if ((ntohs (old_type.header.type) != ntohs (lp->link_type.header.type) |
| || old_type.link_type.value != lp->link_type.link_type.value) |
| || (ntohs (old_id.header.type) != ntohs (lp->link_id.header.type) |
| || ntohl (old_id.value.s_addr) != ntohl (lp->link_id.value.s_addr))) |
| { |
| if (lp->flags & LPFLG_LSA_ENGAGED) |
| ospf_mpls_te_lsa_schedule (lp, REFRESH_THIS_LSA); |
| else |
| ospf_mpls_te_lsa_schedule (lp, REORIGINATE_PER_AREA); |
| } |
| break; |
| default: |
| lp->link_type.header.type = htons (0); |
| lp->link_id.header.type = htons (0); |
| |
| if (lp->flags & LPFLG_LSA_ENGAGED) |
| ospf_mpls_te_lsa_schedule (lp, FLUSH_THIS_LSA); |
| break; |
| } |
| |
| out: |
| return; |
| } |
| |
| static void |
| ospf_mpls_te_nsm_change (struct ospf_neighbor *nbr, int old_state) |
| { |
| /* So far, nothing to do here. */ |
| return; |
| } |
| |
| /*------------------------------------------------------------------------* |
| * Followings are OSPF protocol processing functions for MPLS-TE. |
| *------------------------------------------------------------------------*/ |
| |
| static void |
| build_tlv_header (struct stream *s, struct te_tlv_header *tlvh) |
| { |
| stream_put (s, tlvh, sizeof (struct te_tlv_header)); |
| return; |
| } |
| |
| static void |
| build_router_tlv (struct stream *s) |
| { |
| struct te_tlv_header *tlvh = &OspfMplsTE.router_addr.header; |
| if (ntohs (tlvh->type) != 0) |
| { |
| build_tlv_header (s, tlvh); |
| stream_put (s, tlvh+1, TLV_BODY_SIZE (tlvh)); |
| } |
| return; |
| } |
| |
| static void |
| build_link_subtlv_link_type (struct stream *s, struct mpls_te_link *lp) |
| { |
| struct te_tlv_header *tlvh = &lp->link_type.header; |
| if (ntohs (tlvh->type) != 0) |
| { |
| build_tlv_header (s, tlvh); |
| stream_put (s, tlvh+1, TLV_BODY_SIZE (tlvh)); |
| } |
| return; |
| } |
| |
| static void |
| build_link_subtlv_link_id (struct stream *s, struct mpls_te_link *lp) |
| { |
| struct te_tlv_header *tlvh = &lp->link_id.header; |
| if (ntohs (tlvh->type) != 0) |
| { |
| build_tlv_header (s, tlvh); |
| stream_put (s, tlvh+1, TLV_BODY_SIZE (tlvh)); |
| } |
| return; |
| } |
| |
| static void |
| build_link_subtlv_lclif_ipaddr (struct stream *s, struct mpls_te_link *lp) |
| { |
| struct te_tlv_header *tlvh = (struct te_tlv_header *) lp->lclif_ipaddr; |
| if (tlvh != NULL && ntohs (tlvh->type) != 0) |
| { |
| build_tlv_header (s, tlvh); |
| stream_put (s, tlvh+1, TLV_BODY_SIZE (tlvh)); |
| } |
| return; |
| } |
| |
| static void |
| build_link_subtlv_rmtif_ipaddr (struct stream *s, struct mpls_te_link *lp) |
| { |
| struct te_tlv_header *tlvh = (struct te_tlv_header *) lp->rmtif_ipaddr; |
| if (tlvh != NULL && ntohs (tlvh->type) != 0) |
| { |
| build_tlv_header (s, tlvh); |
| stream_put (s, tlvh+1, TLV_BODY_SIZE (tlvh)); |
| } |
| return; |
| } |
| |
| static void |
| build_link_subtlv_te_metric (struct stream *s, struct mpls_te_link *lp) |
| { |
| struct te_tlv_header *tlvh = &lp->te_metric.header; |
| if (ntohs (tlvh->type) != 0) |
| { |
| build_tlv_header (s, tlvh); |
| stream_put (s, tlvh+1, TLV_BODY_SIZE (tlvh)); |
| } |
| return; |
| } |
| |
| static void |
| build_link_subtlv_max_bw (struct stream *s, struct mpls_te_link *lp) |
| { |
| struct te_tlv_header *tlvh = &lp->max_bw.header; |
| if (ntohs (tlvh->type) != 0) |
| { |
| build_tlv_header (s, tlvh); |
| stream_put (s, tlvh+1, TLV_BODY_SIZE (tlvh)); |
| } |
| return; |
| } |
| |
| static void |
| build_link_subtlv_max_rsv_bw (struct stream *s, struct mpls_te_link *lp) |
| { |
| struct te_tlv_header *tlvh = &lp->max_rsv_bw.header; |
| if (ntohs (tlvh->type) != 0) |
| { |
| build_tlv_header (s, tlvh); |
| stream_put (s, tlvh+1, TLV_BODY_SIZE (tlvh)); |
| } |
| return; |
| } |
| |
| static void |
| build_link_subtlv_unrsv_bw (struct stream *s, struct mpls_te_link *lp) |
| { |
| struct te_tlv_header *tlvh = &lp->unrsv_bw.header; |
| if (ntohs (tlvh->type) != 0) |
| { |
| build_tlv_header (s, tlvh); |
| stream_put (s, tlvh+1, TLV_BODY_SIZE (tlvh)); |
| } |
| return; |
| } |
| |
| static void |
| build_link_subtlv_rsc_clsclr (struct stream *s, struct mpls_te_link *lp) |
| { |
| struct te_tlv_header *tlvh = &lp->rsc_clsclr.header; |
| if (ntohs (tlvh->type) != 0) |
| { |
| build_tlv_header (s, tlvh); |
| stream_put (s, tlvh+1, TLV_BODY_SIZE (tlvh)); |
| } |
| return; |
| } |
| |
| static void |
| build_link_tlv (struct stream *s, struct mpls_te_link *lp) |
| { |
| set_linkparams_link_header (lp); |
| build_tlv_header (s, &lp->link_header.header); |
| |
| build_link_subtlv_link_type (s, lp); |
| build_link_subtlv_link_id (s, lp); |
| build_link_subtlv_lclif_ipaddr (s, lp); |
| build_link_subtlv_rmtif_ipaddr (s, lp); |
| build_link_subtlv_te_metric (s, lp); |
| build_link_subtlv_max_bw (s, lp); |
| build_link_subtlv_max_rsv_bw (s, lp); |
| build_link_subtlv_unrsv_bw (s, lp); |
| build_link_subtlv_rsc_clsclr (s, lp); |
| return; |
| } |
| |
| static void |
| ospf_mpls_te_lsa_body_set (struct stream *s, struct mpls_te_link *lp) |
| { |
| /* |
| * The router address TLV is type 1, and ... |
| * It must appear in exactly one |
| * Traffic Engineering LSA originated by a router. |
| */ |
| build_router_tlv (s); |
| |
| /* |
| * Only one Link TLV shall be carried in each LSA, allowing for fine |
| * granularity changes in topology. |
| */ |
| build_link_tlv (s, lp); |
| return; |
| } |
| |
| /* Create new opaque-LSA. */ |
| static struct ospf_lsa * |
| ospf_mpls_te_lsa_new (struct ospf_area *area, struct mpls_te_link *lp) |
| { |
| struct stream *s; |
| struct lsa_header *lsah; |
| struct ospf_lsa *new = NULL; |
| u_char options, lsa_type; |
| struct in_addr lsa_id; |
| u_int32_t tmp; |
| u_int16_t length; |
| |
| /* Create a stream for LSA. */ |
| if ((s = stream_new (OSPF_MAX_LSA_SIZE)) == NULL) |
| { |
| zlog_warn ("ospf_mpls_te_lsa_new: stream_new() ?"); |
| goto out; |
| } |
| lsah = (struct lsa_header *) STREAM_DATA (s); |
| |
| options = LSA_OPTIONS_GET (area); |
| options |= LSA_OPTIONS_NSSA_GET (area); |
| options |= OSPF_OPTION_O; /* Don't forget this :-) */ |
| |
| lsa_type = OSPF_OPAQUE_AREA_LSA; |
| tmp = SET_OPAQUE_LSID (OPAQUE_TYPE_TRAFFIC_ENGINEERING_LSA, lp->instance); |
| lsa_id.s_addr = htonl (tmp); |
| |
| if (IS_DEBUG_OSPF (lsa, LSA_GENERATE)) |
| zlog_debug ("LSA[Type%d:%s]: Create an Opaque-LSA/MPLS-TE instance", lsa_type, inet_ntoa (lsa_id)); |
| |
| /* Set opaque-LSA header fields. */ |
| lsa_header_set (s, options, lsa_type, lsa_id, area->ospf->router_id); |
| |
| /* Set opaque-LSA body fields. */ |
| ospf_mpls_te_lsa_body_set (s, lp); |
| |
| /* Set length. */ |
| length = stream_get_endp (s); |
| lsah->length = htons (length); |
| |
| /* Now, create an OSPF LSA instance. */ |
| if ((new = ospf_lsa_new ()) == NULL) |
| { |
| zlog_warn ("ospf_mpls_te_lsa_new: ospf_lsa_new() ?"); |
| stream_free (s); |
| goto out; |
| } |
| if ((new->data = ospf_lsa_data_new (length)) == NULL) |
| { |
| zlog_warn ("ospf_mpls_te_lsa_new: ospf_lsa_data_new() ?"); |
| ospf_lsa_unlock (&new); |
| new = NULL; |
| stream_free (s); |
| goto out; |
| } |
| |
| new->area = area; |
| SET_FLAG (new->flags, OSPF_LSA_SELF); |
| memcpy (new->data, lsah, length); |
| stream_free (s); |
| |
| out: |
| return new; |
| } |
| |
| static int |
| ospf_mpls_te_lsa_originate1 (struct ospf_area *area, struct mpls_te_link *lp) |
| { |
| struct ospf_lsa *new; |
| int rc = -1; |
| |
| /* Create new Opaque-LSA/MPLS-TE instance. */ |
| if ((new = ospf_mpls_te_lsa_new (area, lp)) == NULL) |
| { |
| zlog_warn ("ospf_mpls_te_lsa_originate1: ospf_mpls_te_lsa_new() ?"); |
| goto out; |
| } |
| |
| /* Install this LSA into LSDB. */ |
| if (ospf_lsa_install (area->ospf, NULL/*oi*/, new) == NULL) |
| { |
| zlog_warn ("ospf_mpls_te_lsa_originate1: ospf_lsa_install() ?"); |
| ospf_lsa_unlock (&new); |
| goto out; |
| } |
| |
| /* Now this linkparameter entry has associated LSA. */ |
| lp->flags |= LPFLG_LSA_ENGAGED; |
| |
| /* Update new LSA origination count. */ |
| area->ospf->lsa_originate_count++; |
| |
| /* Flood new LSA through area. */ |
| ospf_flood_through_area (area, NULL/*nbr*/, new); |
| |
| if (IS_DEBUG_OSPF (lsa, LSA_GENERATE)) |
| { |
| char area_id[INET_ADDRSTRLEN]; |
| strcpy (area_id, inet_ntoa (area->area_id)); |
| zlog_debug ("LSA[Type%d:%s]: Originate Opaque-LSA/MPLS-TE: Area(%s), Link(%s)", new->data->type, inet_ntoa (new->data->id), area_id, lp->ifp->name); |
| ospf_lsa_header_dump (new->data); |
| } |
| |
| rc = 0; |
| out: |
| return rc; |
| } |
| |
| static int |
| ospf_mpls_te_lsa_originate (void *arg) |
| { |
| struct ospf_area *area = (struct ospf_area *) arg; |
| struct listnode *node, *nnode; |
| struct mpls_te_link *lp; |
| int rc = -1; |
| |
| if (OspfMplsTE.status == disabled) |
| { |
| zlog_info ("ospf_mpls_te_lsa_originate: MPLS-TE is disabled now."); |
| rc = 0; /* This is not an error case. */ |
| goto out; |
| } |
| |
| for (ALL_LIST_ELEMENTS (OspfMplsTE.iflist, node, nnode, lp)) |
| { |
| if (lp->area == NULL) |
| continue; |
| if (! IPV4_ADDR_SAME (&lp->area->area_id, &area->area_id)) |
| continue; |
| |
| if (lp->flags & LPFLG_LSA_ENGAGED) |
| { |
| if (lp->flags & LPFLG_LSA_FORCED_REFRESH) |
| { |
| lp->flags &= ~LPFLG_LSA_FORCED_REFRESH; |
| ospf_mpls_te_lsa_schedule (lp, REFRESH_THIS_LSA); |
| } |
| continue; |
| } |
| if (! is_mandated_params_set (lp)) |
| { |
| zlog_warn ("ospf_mpls_te_lsa_originate: Link(%s) lacks some mandated MPLS-TE parameters.", lp->ifp ? lp->ifp->name : "?"); |
| continue; |
| } |
| |
| /* Ok, let's try to originate an LSA for this area and Link. */ |
| if (ospf_mpls_te_lsa_originate1 (area, lp) != 0) |
| goto out; |
| } |
| |
| rc = 0; |
| out: |
| return rc; |
| } |
| |
| static struct ospf_lsa * |
| ospf_mpls_te_lsa_refresh (struct ospf_lsa *lsa) |
| { |
| struct mpls_te_link *lp; |
| struct ospf_area *area = lsa->area; |
| struct ospf_lsa *new = NULL; |
| |
| if (OspfMplsTE.status == disabled) |
| { |
| /* |
| * This LSA must have flushed before due to MPLS-TE status change. |
| * It seems a slip among routers in the routing domain. |
| */ |
| zlog_info ("ospf_mpls_te_lsa_refresh: MPLS-TE is disabled now."); |
| lsa->data->ls_age = htons (OSPF_LSA_MAXAGE); /* Flush it anyway. */ |
| } |
| |
| /* At first, resolve lsa/lp relationship. */ |
| if ((lp = lookup_linkparams_by_instance (lsa)) == NULL) |
| { |
| zlog_warn ("ospf_mpls_te_lsa_refresh: Invalid parameter?"); |
| lsa->data->ls_age = htons (OSPF_LSA_MAXAGE); /* Flush it anyway. */ |
| } |
| |
| /* If the lsa's age reached to MaxAge, start flushing procedure. */ |
| if (IS_LSA_MAXAGE (lsa)) |
| { |
| if (lp) |
| lp->flags &= ~LPFLG_LSA_ENGAGED; |
| ospf_opaque_lsa_flush_schedule (lsa); |
| goto out; |
| } |
| |
| /* Create new Opaque-LSA/MPLS-TE instance. */ |
| if ((new = ospf_mpls_te_lsa_new (area, lp)) == NULL) |
| { |
| zlog_warn ("ospf_mpls_te_lsa_refresh: ospf_mpls_te_lsa_new() ?"); |
| goto out; |
| } |
| new->data->ls_seqnum = lsa_seqnum_increment (lsa); |
| |
| /* Install this LSA into LSDB. */ |
| /* Given "lsa" will be freed in the next function. */ |
| if (ospf_lsa_install (area->ospf, NULL/*oi*/, new) == NULL) |
| { |
| zlog_warn ("ospf_mpls_te_lsa_refresh: ospf_lsa_install() ?"); |
| ospf_lsa_unlock (&new); |
| goto out; |
| } |
| |
| /* Flood updated LSA through area. */ |
| ospf_flood_through_area (area, NULL/*nbr*/, new); |
| |
| /* Debug logging. */ |
| if (IS_DEBUG_OSPF (lsa, LSA_GENERATE)) |
| { |
| zlog_debug ("LSA[Type%d:%s]: Refresh Opaque-LSA/MPLS-TE", |
| new->data->type, inet_ntoa (new->data->id)); |
| ospf_lsa_header_dump (new->data); |
| } |
| |
| out: |
| return new; |
| } |
| |
| static void |
| ospf_mpls_te_lsa_schedule (struct mpls_te_link *lp, |
| enum sched_opcode opcode) |
| { |
| struct ospf_lsa lsa; |
| struct lsa_header lsah; |
| u_int32_t tmp; |
| |
| memset (&lsa, 0, sizeof (lsa)); |
| memset (&lsah, 0, sizeof (lsah)); |
| |
| lsa.area = lp->area; |
| lsa.data = &lsah; |
| lsah.type = OSPF_OPAQUE_AREA_LSA; |
| tmp = SET_OPAQUE_LSID (OPAQUE_TYPE_TRAFFIC_ENGINEERING_LSA, lp->instance); |
| lsah.id.s_addr = htonl (tmp); |
| |
| switch (opcode) |
| { |
| case REORIGINATE_PER_AREA: |
| ospf_opaque_lsa_reoriginate_schedule ((void *) lp->area, |
| OSPF_OPAQUE_AREA_LSA, OPAQUE_TYPE_TRAFFIC_ENGINEERING_LSA); |
| break; |
| case REFRESH_THIS_LSA: |
| ospf_opaque_lsa_refresh_schedule (&lsa); |
| break; |
| case FLUSH_THIS_LSA: |
| lp->flags &= ~LPFLG_LSA_ENGAGED; |
| ospf_opaque_lsa_flush_schedule (&lsa); |
| break; |
| default: |
| zlog_warn ("ospf_mpls_te_lsa_schedule: Unknown opcode (%u)", opcode); |
| break; |
| } |
| |
| return; |
| } |
| |
| /*------------------------------------------------------------------------* |
| * Followings are vty session control functions. |
| *------------------------------------------------------------------------*/ |
| |
| static u_int16_t |
| show_vty_router_addr (struct vty *vty, struct te_tlv_header *tlvh) |
| { |
| struct te_tlv_router_addr *top = (struct te_tlv_router_addr *) tlvh; |
| |
| if (vty != NULL) |
| vty_out (vty, " Router-Address: %s%s", inet_ntoa (top->value), VTY_NEWLINE); |
| else |
| zlog_debug (" Router-Address: %s", inet_ntoa (top->value)); |
| |
| return TLV_SIZE (tlvh); |
| } |
| |
| static u_int16_t |
| show_vty_link_header (struct vty *vty, struct te_tlv_header *tlvh) |
| { |
| struct te_tlv_link *top = (struct te_tlv_link *) tlvh; |
| |
| if (vty != NULL) |
| vty_out (vty, " Link: %u octets of data%s", ntohs (top->header.length), VTY_NEWLINE); |
| else |
| zlog_debug (" Link: %u octets of data", ntohs (top->header.length)); |
| |
| return TLV_HDR_SIZE; /* Here is special, not "TLV_SIZE". */ |
| } |
| |
| static u_int16_t |
| show_vty_link_subtlv_link_type (struct vty *vty, struct te_tlv_header *tlvh) |
| { |
| struct te_link_subtlv_link_type *top; |
| const char *cp = "Unknown"; |
| |
| top = (struct te_link_subtlv_link_type *) tlvh; |
| switch (top->link_type.value) |
| { |
| case LINK_TYPE_SUBTLV_VALUE_PTP: |
| cp = "Point-to-point"; |
| break; |
| case LINK_TYPE_SUBTLV_VALUE_MA: |
| cp = "Multiaccess"; |
| break; |
| default: |
| break; |
| } |
| |
| if (vty != NULL) |
| vty_out (vty, " Link-Type: %s (%u)%s", cp, top->link_type.value, VTY_NEWLINE); |
| else |
| zlog_debug (" Link-Type: %s (%u)", cp, top->link_type.value); |
| |
| return TLV_SIZE (tlvh); |
| } |
| |
| static u_int16_t |
| show_vty_link_subtlv_link_id (struct vty *vty, struct te_tlv_header *tlvh) |
| { |
| struct te_link_subtlv_link_id *top; |
| |
| top = (struct te_link_subtlv_link_id *) tlvh; |
| if (vty != NULL) |
| vty_out (vty, " Link-ID: %s%s", inet_ntoa (top->value), VTY_NEWLINE); |
| else |
| zlog_debug (" Link-ID: %s", inet_ntoa (top->value)); |
| |
| return TLV_SIZE (tlvh); |
| } |
| |
| static u_int16_t |
| show_vty_link_subtlv_lclif_ipaddr (struct vty *vty, struct te_tlv_header *tlvh) |
| { |
| struct te_link_subtlv_lclif_ipaddr *top; |
| int i, n; |
| |
| top = (struct te_link_subtlv_lclif_ipaddr *) tlvh; |
| n = ntohs (tlvh->length) / sizeof (top->value[0]); |
| |
| if (vty != NULL) |
| vty_out (vty, " Local Interface IP Address(es): %d%s", n, VTY_NEWLINE); |
| else |
| zlog_debug (" Local Interface IP Address(es): %d", n); |
| |
| for (i = 0; i < n; i++) |
| { |
| if (vty != NULL) |
| vty_out (vty, " #%d: %s%s", i, inet_ntoa (top->value[i]), VTY_NEWLINE); |
| else |
| zlog_debug (" #%d: %s", i, inet_ntoa (top->value[i])); |
| } |
| return TLV_SIZE (tlvh); |
| } |
| |
| static u_int16_t |
| show_vty_link_subtlv_rmtif_ipaddr (struct vty *vty, struct te_tlv_header *tlvh) |
| { |
| struct te_link_subtlv_rmtif_ipaddr *top; |
| int i, n; |
| |
| top = (struct te_link_subtlv_rmtif_ipaddr *) tlvh; |
| n = ntohs (tlvh->length) / sizeof (top->value[0]); |
| if (vty != NULL) |
| vty_out (vty, " Remote Interface IP Address(es): %d%s", n, VTY_NEWLINE); |
| else |
| zlog_debug (" Remote Interface IP Address(es): %d", n); |
| |
| for (i = 0; i < n; i++) |
| { |
| if (vty != NULL) |
| vty_out (vty, " #%d: %s%s", i, inet_ntoa (top->value[i]), VTY_NEWLINE); |
| else |
| zlog_debug (" #%d: %s", i, inet_ntoa (top->value[i])); |
| } |
| return TLV_SIZE (tlvh); |
| } |
| |
| static u_int16_t |
| show_vty_link_subtlv_te_metric (struct vty *vty, struct te_tlv_header *tlvh) |
| { |
| struct te_link_subtlv_te_metric *top; |
| |
| top = (struct te_link_subtlv_te_metric *) tlvh; |
| if (vty != NULL) |
| vty_out (vty, " Traffic Engineering Metric: %u%s", (u_int32_t) ntohl (top->value), VTY_NEWLINE); |
| else |
| zlog_debug (" Traffic Engineering Metric: %u", (u_int32_t) ntohl (top->value)); |
| |
| return TLV_SIZE (tlvh); |
| } |
| |
| static u_int16_t |
| show_vty_link_subtlv_max_bw (struct vty *vty, struct te_tlv_header *tlvh) |
| { |
| struct te_link_subtlv_max_bw *top; |
| float fval; |
| |
| top = (struct te_link_subtlv_max_bw *) tlvh; |
| ntohf (&top->value, &fval); |
| |
| if (vty != NULL) |
| vty_out (vty, " Maximum Bandwidth: %g (Bytes/sec)%s", fval, VTY_NEWLINE); |
| else |
| zlog_debug (" Maximum Bandwidth: %g (Bytes/sec)", fval); |
| |
| return TLV_SIZE (tlvh); |
| } |
| |
| static u_int16_t |
| show_vty_link_subtlv_max_rsv_bw (struct vty *vty, struct te_tlv_header *tlvh) |
| { |
| struct te_link_subtlv_max_rsv_bw *top; |
| float fval; |
| |
| top = (struct te_link_subtlv_max_rsv_bw *) tlvh; |
| ntohf (&top->value, &fval); |
| |
| if (vty != NULL) |
| vty_out (vty, " Maximum Reservable Bandwidth: %g (Bytes/sec)%s", fval, VTY_NEWLINE); |
| else |
| zlog_debug (" Maximum Reservable Bandwidth: %g (Bytes/sec)", fval); |
| |
| return TLV_SIZE (tlvh); |
| } |
| |
| static u_int16_t |
| show_vty_link_subtlv_unrsv_bw (struct vty *vty, struct te_tlv_header *tlvh) |
| { |
| struct te_link_subtlv_unrsv_bw *top; |
| float fval; |
| int i; |
| |
| top = (struct te_link_subtlv_unrsv_bw *) tlvh; |
| for (i = 0; i < 8; i++) |
| { |
| ntohf (&top->value[i], &fval); |
| if (vty != NULL) |
| vty_out (vty, " Unreserved Bandwidth (pri %d): %g (Bytes/sec)%s", i, fval, VTY_NEWLINE); |
| else |
| zlog_debug (" Unreserved Bandwidth (pri %d): %g (Bytes/sec)", i, fval); |
| } |
| |
| return TLV_SIZE (tlvh); |
| } |
| |
| static u_int16_t |
| show_vty_link_subtlv_rsc_clsclr (struct vty *vty, struct te_tlv_header *tlvh) |
| { |
| struct te_link_subtlv_rsc_clsclr *top; |
| |
| top = (struct te_link_subtlv_rsc_clsclr *) tlvh; |
| if (vty != NULL) |
| vty_out (vty, " Resource class/color: 0x%x%s", (u_int32_t) ntohl (top->value), VTY_NEWLINE); |
| else |
| zlog_debug (" Resource Class/Color: 0x%x", (u_int32_t) ntohl (top->value)); |
| |
| return TLV_SIZE (tlvh); |
| } |
| |
| static u_int16_t |
| show_vty_unknown_tlv (struct vty *vty, struct te_tlv_header *tlvh) |
| { |
| if (vty != NULL) |
| vty_out (vty, " Unknown TLV: [type(0x%x), length(0x%x)]%s", ntohs (tlvh->type), ntohs (tlvh->length), VTY_NEWLINE); |
| else |
| zlog_debug (" Unknown TLV: [type(0x%x), length(0x%x)]", ntohs (tlvh->type), ntohs (tlvh->length)); |
| |
| return TLV_SIZE (tlvh); |
| } |
| |
| static u_int16_t |
| ospf_mpls_te_show_link_subtlv (struct vty *vty, struct te_tlv_header *tlvh0, |
| u_int16_t subtotal, u_int16_t total) |
| { |
| struct te_tlv_header *tlvh, *next; |
| u_int16_t sum = subtotal; |
| |
| for (tlvh = tlvh0; sum < total; tlvh = (next ? next : TLV_HDR_NEXT (tlvh))) |
| { |
| next = NULL; |
| switch (ntohs (tlvh->type)) |
| { |
| case TE_LINK_SUBTLV_LINK_TYPE: |
| sum += show_vty_link_subtlv_link_type (vty, tlvh); |
| break; |
| case TE_LINK_SUBTLV_LINK_ID: |
| sum += show_vty_link_subtlv_link_id (vty, tlvh); |
| break; |
| case TE_LINK_SUBTLV_LCLIF_IPADDR: |
| sum += show_vty_link_subtlv_lclif_ipaddr (vty, tlvh); |
| break; |
| case TE_LINK_SUBTLV_RMTIF_IPADDR: |
| sum += show_vty_link_subtlv_rmtif_ipaddr (vty, tlvh); |
| break; |
| case TE_LINK_SUBTLV_TE_METRIC: |
| sum += show_vty_link_subtlv_te_metric (vty, tlvh); |
| break; |
| case TE_LINK_SUBTLV_MAX_BW: |
| sum += show_vty_link_subtlv_max_bw (vty, tlvh); |
| break; |
| case TE_LINK_SUBTLV_MAX_RSV_BW: |
| sum += show_vty_link_subtlv_max_rsv_bw (vty, tlvh); |
| break; |
| case TE_LINK_SUBTLV_UNRSV_BW: |
| sum += show_vty_link_subtlv_unrsv_bw (vty, tlvh); |
| break; |
| case TE_LINK_SUBTLV_RSC_CLSCLR: |
| sum += show_vty_link_subtlv_rsc_clsclr (vty, tlvh); |
| break; |
| default: |
| sum += show_vty_unknown_tlv (vty, tlvh); |
| break; |
| } |
| } |
| return sum; |
| } |
| |
| static void |
| ospf_mpls_te_show_info (struct vty *vty, struct ospf_lsa *lsa) |
| { |
| struct lsa_header *lsah = (struct lsa_header *) lsa->data; |
| struct te_tlv_header *tlvh, *next; |
| u_int16_t sum, total; |
| u_int16_t (* subfunc)(struct vty *vty, struct te_tlv_header *tlvh, |
| u_int16_t subtotal, u_int16_t total) = NULL; |
| |
| sum = 0; |
| total = ntohs (lsah->length) - OSPF_LSA_HEADER_SIZE; |
| |
| for (tlvh = TLV_HDR_TOP (lsah); sum < total; |
| tlvh = (next ? next : TLV_HDR_NEXT (tlvh))) |
| { |
| if (subfunc != NULL) |
| { |
| sum = (* subfunc)(vty, tlvh, sum, total); |
| next = (struct te_tlv_header *)((char *) tlvh + sum); |
| subfunc = NULL; |
| continue; |
| } |
| |
| next = NULL; |
| switch (ntohs (tlvh->type)) |
| { |
| case TE_TLV_ROUTER_ADDR: |
| sum += show_vty_router_addr (vty, tlvh); |
| break; |
| case TE_TLV_LINK: |
| sum += show_vty_link_header (vty, tlvh); |
| subfunc = ospf_mpls_te_show_link_subtlv; |
| next = tlvh + 1; |
| break; |
| default: |
| sum += show_vty_unknown_tlv (vty, tlvh); |
| break; |
| } |
| } |
| return; |
| } |
| |
| static void |
| ospf_mpls_te_config_write_router (struct vty *vty) |
| { |
| if (OspfMplsTE.status == enabled) |
| { |
| vty_out (vty, " mpls-te%s", VTY_NEWLINE); |
| vty_out (vty, " mpls-te router-address %s%s", |
| inet_ntoa (OspfMplsTE.router_addr.value), VTY_NEWLINE); |
| } |
| return; |
| } |
| |
| static void |
| ospf_mpls_te_config_write_if (struct vty *vty, struct interface *ifp) |
| { |
| struct mpls_te_link *lp; |
| |
| if ((OspfMplsTE.status == enabled) |
| && (! if_is_loopback (ifp) && if_is_up (ifp) && ospf_oi_count (ifp) > 0) |
| && ((lp = lookup_linkparams_by_ifp (ifp)) != NULL)) |
| { |
| float fval; |
| int i; |
| |
| vty_out (vty, " mpls-te link metric %u%s", |
| (u_int32_t) ntohl (lp->te_metric.value), VTY_NEWLINE); |
| |
| ntohf (&lp->max_bw.value, &fval); |
| if (fval >= MPLS_TE_MINIMUM_BANDWIDTH) |
| vty_out (vty, " mpls-te link max-bw %g%s", fval, VTY_NEWLINE); |
| |
| ntohf (&lp->max_rsv_bw.value, &fval); |
| if (fval >= MPLS_TE_MINIMUM_BANDWIDTH) |
| vty_out (vty, " mpls-te link max-rsv-bw %g%s", fval, VTY_NEWLINE); |
| |
| for (i = 0; i < 8; i++) |
| { |
| ntohf (&lp->unrsv_bw.value[i], &fval); |
| if (fval >= MPLS_TE_MINIMUM_BANDWIDTH) |
| vty_out (vty, " mpls-te link unrsv-bw %d %g%s", |
| i, fval, VTY_NEWLINE); |
| } |
| |
| vty_out (vty, " mpls-te link rsc-clsclr 0x%x%s", |
| (u_int32_t) ntohl (lp->rsc_clsclr.value), VTY_NEWLINE); |
| } |
| return; |
| } |
| |
| /*------------------------------------------------------------------------* |
| * Followings are vty command functions. |
| *------------------------------------------------------------------------*/ |
| |
| DEFUN (mpls_te, |
| mpls_te_cmd, |
| "mpls-te", |
| "Configure MPLS-TE parameters\n" |
| "Enable the MPLS-TE functionality\n") |
| { |
| struct listnode *node, *nnode; |
| struct mpls_te_link *lp; |
| |
| if (OspfMplsTE.status == enabled) |
| return CMD_SUCCESS; |
| |
| if (IS_DEBUG_OSPF_EVENT) |
| zlog_debug ("MPLS-TE: OFF -> ON"); |
| |
| OspfMplsTE.status = enabled; |
| |
| /* |
| * Following code is intended to handle two cases; |
| * |
| * 1) MPLS-TE was disabled at startup time, but now become enabled. |
| * 2) MPLS-TE was once enabled then disabled, and now enabled again. |
| */ |
| for (ALL_LIST_ELEMENTS (OspfMplsTE.iflist, node, nnode, lp)) |
| initialize_linkparams (lp); |
| |
| ospf_mpls_te_foreach_area (ospf_mpls_te_lsa_schedule, REORIGINATE_PER_AREA); |
| |
| return CMD_SUCCESS; |
| } |
| |
| ALIAS (mpls_te, |
| mpls_te_on_cmd, |
| "mpls-te on", |
| "Configure MPLS-TE parameters\n" |
| "Enable the MPLS-TE functionality\n") |
| |
| DEFUN (no_mpls_te, |
| no_mpls_te_cmd, |
| "no mpls-te", |
| NO_STR |
| "Configure MPLS-TE parameters\n" |
| "Disable the MPLS-TE functionality\n") |
| { |
| struct listnode *node, *nnode; |
| struct mpls_te_link *lp; |
| |
| if (OspfMplsTE.status == disabled) |
| return CMD_SUCCESS; |
| |
| if (IS_DEBUG_OSPF_EVENT) |
| zlog_debug ("MPLS-TE: ON -> OFF"); |
| |
| OspfMplsTE.status = disabled; |
| |
| for (ALL_LIST_ELEMENTS (OspfMplsTE.iflist, node, nnode, lp)) |
| if (lp->area != NULL) |
| if (lp->flags & LPFLG_LSA_ENGAGED) |
| ospf_mpls_te_lsa_schedule (lp, FLUSH_THIS_LSA); |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (mpls_te_router_addr, |
| mpls_te_router_addr_cmd, |
| "mpls-te router-address A.B.C.D", |
| "MPLS-TE specific commands\n" |
| "Stable IP address of the advertising router\n" |
| "MPLS-TE router address in IPv4 address format\n") |
| { |
| struct te_tlv_router_addr *ra = &OspfMplsTE.router_addr; |
| struct in_addr value; |
| |
| if (! inet_aton (argv[0], &value)) |
| { |
| vty_out (vty, "Please specify Router-Addr by A.B.C.D%s", VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| if (ntohs (ra->header.type) == 0 |
| || ntohl (ra->value.s_addr) != ntohl (value.s_addr)) |
| { |
| struct listnode *node, *nnode; |
| struct mpls_te_link *lp; |
| int need_to_reoriginate = 0; |
| |
| set_mpls_te_router_addr (value); |
| |
| if (OspfMplsTE.status == disabled) |
| goto out; |
| |
| for (ALL_LIST_ELEMENTS (OspfMplsTE.iflist, node, nnode, lp)) |
| { |
| if (lp->area == NULL) |
| continue; |
| |
| if ((lp->flags & LPFLG_LSA_ENGAGED) == 0) |
| { |
| need_to_reoriginate = 1; |
| break; |
| } |
| } |
| |
| for (ALL_LIST_ELEMENTS (OspfMplsTE.iflist, node, nnode, lp)) |
| { |
| if (lp->area == NULL) |
| continue; |
| |
| if (need_to_reoriginate) |
| lp->flags |= LPFLG_LSA_FORCED_REFRESH; |
| else |
| ospf_mpls_te_lsa_schedule (lp, REFRESH_THIS_LSA); |
| } |
| |
| if (need_to_reoriginate) |
| ospf_mpls_te_foreach_area ( |
| ospf_mpls_te_lsa_schedule, REORIGINATE_PER_AREA); |
| } |
| out: |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (mpls_te_link_metric, |
| mpls_te_link_metric_cmd, |
| "mpls-te link metric <0-4294967295>", |
| "MPLS-TE specific commands\n" |
| "Configure MPLS-TE link parameters\n" |
| "Link metric for MPLS-TE purpose\n" |
| "Metric\n") |
| { |
| struct interface *ifp = (struct interface *) vty->index; |
| struct mpls_te_link *lp; |
| u_int32_t value; |
| |
| if ((lp = lookup_linkparams_by_ifp (ifp)) == NULL) |
| { |
| vty_out (vty, "mpls_te_link_metric: Something wrong!%s", VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| value = strtoul (argv[0], NULL, 10); |
| |
| if (ntohs (lp->te_metric.header.type) == 0 |
| || ntohl (lp->te_metric.value) != value) |
| { |
| set_linkparams_te_metric (lp, value); |
| |
| if (OspfMplsTE.status == enabled) |
| if (lp->area != NULL) |
| { |
| if (lp->flags & LPFLG_LSA_ENGAGED) |
| ospf_mpls_te_lsa_schedule (lp, REFRESH_THIS_LSA); |
| else |
| ospf_mpls_te_lsa_schedule (lp, REORIGINATE_PER_AREA); |
| } |
| } |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (mpls_te_link_maxbw, |
| mpls_te_link_maxbw_cmd, |
| "mpls-te link max-bw BANDWIDTH", |
| "MPLS-TE specific commands\n" |
| "Configure MPLS-TE link parameters\n" |
| "Maximum bandwidth that can be used\n" |
| "Bytes/second (IEEE floating point format)\n") |
| { |
| struct interface *ifp = (struct interface *) vty->index; |
| struct mpls_te_link *lp; |
| float f1, f2; |
| |
| if ((lp = lookup_linkparams_by_ifp (ifp)) == NULL) |
| { |
| vty_out (vty, "mpls_te_link_maxbw: Something wrong!%s", VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| ntohf (&lp->max_bw.value, &f1); |
| if (sscanf (argv[0], "%g", &f2) != 1) |
| { |
| vty_out (vty, "mpls_te_link_maxbw: fscanf: %s%s", safe_strerror (errno), VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| if (ntohs (lp->max_bw.header.type) == 0 |
| || f1 != f2) |
| { |
| set_linkparams_max_bw (lp, &f2); |
| |
| if (OspfMplsTE.status == enabled) |
| if (lp->area != NULL) |
| { |
| if (lp->flags & LPFLG_LSA_ENGAGED) |
| ospf_mpls_te_lsa_schedule (lp, REFRESH_THIS_LSA); |
| else |
| ospf_mpls_te_lsa_schedule (lp, REORIGINATE_PER_AREA); |
| } |
| } |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (mpls_te_link_max_rsv_bw, |
| mpls_te_link_max_rsv_bw_cmd, |
| "mpls-te link max-rsv-bw BANDWIDTH", |
| "MPLS-TE specific commands\n" |
| "Configure MPLS-TE link parameters\n" |
| "Maximum bandwidth that may be reserved\n" |
| "Bytes/second (IEEE floating point format)\n") |
| { |
| struct interface *ifp = (struct interface *) vty->index; |
| struct mpls_te_link *lp; |
| float f1, f2; |
| |
| if ((lp = lookup_linkparams_by_ifp (ifp)) == NULL) |
| { |
| vty_out (vty, "mpls_te_link_max_rsv_bw: Something wrong!%s", VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| ntohf (&lp->max_rsv_bw.value, &f1); |
| if (sscanf (argv[0], "%g", &f2) != 1) |
| { |
| vty_out (vty, "mpls_te_link_max_rsv_bw: fscanf: %s%s", safe_strerror (errno), VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| if (ntohs (lp->max_rsv_bw.header.type) == 0 |
| || f1 != f2) |
| { |
| set_linkparams_max_rsv_bw (lp, &f2); |
| |
| if (OspfMplsTE.status == enabled) |
| if (lp->area != NULL) |
| { |
| if (lp->flags & LPFLG_LSA_ENGAGED) |
| ospf_mpls_te_lsa_schedule (lp, REFRESH_THIS_LSA); |
| else |
| ospf_mpls_te_lsa_schedule (lp, REORIGINATE_PER_AREA); |
| } |
| } |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (mpls_te_link_unrsv_bw, |
| mpls_te_link_unrsv_bw_cmd, |
| "mpls-te link unrsv-bw <0-7> BANDWIDTH", |
| "MPLS-TE specific commands\n" |
| "Configure MPLS-TE link parameters\n" |
| "Unreserved bandwidth at each priority level\n" |
| "Priority\n" |
| "Bytes/second (IEEE floating point format)\n") |
| { |
| struct interface *ifp = (struct interface *) vty->index; |
| struct mpls_te_link *lp; |
| int priority; |
| float f1, f2; |
| |
| if ((lp = lookup_linkparams_by_ifp (ifp)) == NULL) |
| { |
| vty_out (vty, "mpls_te_link_unrsv_bw: Something wrong!%s", VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| /* We don't have to consider about range check here. */ |
| if (sscanf (argv[0], "%d", &priority) != 1) |
| { |
| vty_out (vty, "mpls_te_link_unrsv_bw: fscanf: %s%s", safe_strerror (errno), VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| ntohf (&lp->unrsv_bw.value [priority], &f1); |
| if (sscanf (argv[1], "%g", &f2) != 1) |
| { |
| vty_out (vty, "mpls_te_link_unrsv_bw: fscanf: %s%s", safe_strerror (errno), VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| if (ntohs (lp->unrsv_bw.header.type) == 0 |
| || f1 != f2) |
| { |
| set_linkparams_unrsv_bw (lp, priority, &f2); |
| |
| if (OspfMplsTE.status == enabled) |
| if (lp->area != NULL) |
| { |
| if (lp->flags & LPFLG_LSA_ENGAGED) |
| ospf_mpls_te_lsa_schedule (lp, REFRESH_THIS_LSA); |
| else |
| ospf_mpls_te_lsa_schedule (lp, REORIGINATE_PER_AREA); |
| } |
| } |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (mpls_te_link_rsc_clsclr, |
| mpls_te_link_rsc_clsclr_cmd, |
| "mpls-te link rsc-clsclr BITPATTERN", |
| "MPLS-TE specific commands\n" |
| "Configure MPLS-TE link parameters\n" |
| "Administrative group membership\n" |
| "32-bit Hexadecimal value (ex. 0xa1)\n") |
| { |
| struct interface *ifp = (struct interface *) vty->index; |
| struct mpls_te_link *lp; |
| unsigned long value; |
| |
| if ((lp = lookup_linkparams_by_ifp (ifp)) == NULL) |
| { |
| vty_out (vty, "mpls_te_link_rsc_clsclr: Something wrong!%s", VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| if (sscanf (argv[0], "0x%lx", &value) != 1) |
| { |
| vty_out (vty, "mpls_te_link_rsc_clsclr: fscanf: %s%s", safe_strerror (errno), VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| if (ntohs (lp->rsc_clsclr.header.type) == 0 |
| || ntohl (lp->rsc_clsclr.value) != value) |
| { |
| set_linkparams_rsc_clsclr (lp, value); |
| |
| if (OspfMplsTE.status == enabled) |
| if (lp->area != NULL) |
| { |
| if (lp->flags & LPFLG_LSA_ENGAGED) |
| ospf_mpls_te_lsa_schedule (lp, REFRESH_THIS_LSA); |
| else |
| ospf_mpls_te_lsa_schedule (lp, REORIGINATE_PER_AREA); |
| } |
| } |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (show_mpls_te_router, |
| show_mpls_te_router_cmd, |
| "show mpls-te router", |
| SHOW_STR |
| "MPLS-TE information\n" |
| "Router information\n") |
| { |
| if (OspfMplsTE.status == enabled) |
| { |
| vty_out (vty, "--- MPLS-TE router parameters ---%s", |
| VTY_NEWLINE); |
| |
| if (ntohs (OspfMplsTE.router_addr.header.type) != 0) |
| show_vty_router_addr (vty, &OspfMplsTE.router_addr.header); |
| else if (vty != NULL) |
| vty_out (vty, " N/A%s", VTY_NEWLINE); |
| } |
| return CMD_SUCCESS; |
| } |
| |
| static void |
| show_mpls_te_link_sub (struct vty *vty, struct interface *ifp) |
| { |
| struct mpls_te_link *lp; |
| struct te_tlv_header *tlvh; |
| |
| if ((OspfMplsTE.status == enabled) |
| && (! if_is_loopback (ifp) && if_is_up (ifp) && ospf_oi_count (ifp) > 0) |
| && ((lp = lookup_linkparams_by_ifp (ifp)) != NULL)) |
| { |
| vty_out (vty, "-- MPLS-TE link parameters for %s --%s", |
| ifp->name, VTY_NEWLINE); |
| |
| show_vty_link_subtlv_link_type (vty, &lp->link_type.header); |
| show_vty_link_subtlv_link_id (vty, &lp->link_id.header); |
| |
| if ((tlvh = (struct te_tlv_header *) lp->lclif_ipaddr) != NULL) |
| show_vty_link_subtlv_lclif_ipaddr (vty, tlvh); |
| if ((tlvh = (struct te_tlv_header *) lp->rmtif_ipaddr) != NULL) |
| show_vty_link_subtlv_rmtif_ipaddr (vty, tlvh); |
| |
| show_vty_link_subtlv_te_metric (vty, &lp->te_metric.header); |
| |
| show_vty_link_subtlv_max_bw (vty, &lp->max_bw.header); |
| show_vty_link_subtlv_max_rsv_bw (vty, &lp->max_rsv_bw.header); |
| show_vty_link_subtlv_unrsv_bw (vty, &lp->unrsv_bw.header); |
| show_vty_link_subtlv_rsc_clsclr (vty, &lp->rsc_clsclr.header); |
| } |
| else |
| { |
| vty_out (vty, " %s: MPLS-TE is disabled on this interface%s", |
| ifp->name, VTY_NEWLINE); |
| } |
| |
| return; |
| } |
| |
| DEFUN (show_mpls_te_link, |
| show_mpls_te_link_cmd, |
| "show mpls-te interface [INTERFACE]", |
| SHOW_STR |
| "MPLS-TE information\n" |
| "Interface information\n" |
| "Interface name\n") |
| { |
| struct interface *ifp; |
| struct listnode *node, *nnode; |
| |
| /* Show All Interfaces. */ |
| if (argc == 0) |
| { |
| for (ALL_LIST_ELEMENTS (iflist, node, nnode, ifp)) |
| show_mpls_te_link_sub (vty, ifp); |
| } |
| /* Interface name is specified. */ |
| else |
| { |
| if ((ifp = if_lookup_by_name (argv[0])) == NULL) |
| vty_out (vty, "No such interface name%s", VTY_NEWLINE); |
| else |
| show_mpls_te_link_sub (vty, ifp); |
| } |
| |
| return CMD_SUCCESS; |
| } |
| |
| static void |
| ospf_mpls_te_register_vty (void) |
| { |
| install_element (VIEW_NODE, &show_mpls_te_router_cmd); |
| install_element (VIEW_NODE, &show_mpls_te_link_cmd); |
| |
| install_element (OSPF_NODE, &mpls_te_cmd); |
| install_element (OSPF_NODE, &no_mpls_te_cmd); |
| install_element (OSPF_NODE, &mpls_te_on_cmd); |
| install_element (OSPF_NODE, &mpls_te_router_addr_cmd); |
| |
| install_element (INTERFACE_NODE, &mpls_te_link_metric_cmd); |
| install_element (INTERFACE_NODE, &mpls_te_link_maxbw_cmd); |
| install_element (INTERFACE_NODE, &mpls_te_link_max_rsv_bw_cmd); |
| install_element (INTERFACE_NODE, &mpls_te_link_unrsv_bw_cmd); |
| install_element (INTERFACE_NODE, &mpls_te_link_rsc_clsclr_cmd); |
| |
| return; |
| } |