| Summary of CLI commands, expanded for Opaque-LSA/MPLS-TE. |
| --------------------------------------------------------- |
| |
| router> |
| |
| show ip ospf database (asbr-summary|external|max-age|network|router|self-originate|summary|opaque-link|opaque-area|opaque-external) |
| |
| show ip ospf database (asbr-summary|external|network|router|summary|opaque-link|opaque-area|opaque-external) (self-originate|) |
| |
| show ip ospf database (asbr-summary|external|network|router|summary|opaque-link|opaque-area|opaque-external) A.B.C.D |
| |
| show ip ospf database (asbr-summary|external|network|router|summary|opaque-link|opaque-area|opaque-external) A.B.C.D (self-originate|) |
| |
| show ip ospf database (asbr-summary|external|network|router|summary|opaque-link|opaque-area|opaque-external) A.B.C.D adv-router A.B.C.D |
| |
| show ip ospf database (asbr-summary|external|network|router|summary|opaque-link|opaque-area|opaque-external) adv-router A.B.C.D |
| |
| --> Add database items: opaque-link, opaque-area, opaque-external |
| |
| show mpls-te interface [INTERFACE] |
| |
| --> Show current MPLS-TE link-TLV parameters. |
| If [INTERFACE] is omitted, all interfaces will be displayed. |
| |
| show mpls-te router |
| |
| --> Show current MPLS-TE Router-TLV parameters. |
| |
| router> enable |
| router# |
| router# configure terminal |
| router(config)# interface [INTERFACE] |
| router(config-if)# |
| |
| mpls-te link max-bw BANDWIDTH |
| |
| --> Set MPLS-TE link-TLV parameter: Maximum Bandwidth (Bytes/sec). |
| In integer or floating point format (1000, or 1.0e3) |
| |
| mpls-te link max-rsv-bw BANDWIDTH |
| |
| --> Set MPLS-TE link-TLV parameter: Maximum Reservable Bandwidth (Bytes/sec). |
| In integer or floating point format (1000, or 1.0e3) |
| |
| mpls-te link metric <0-4294967295> |
| |
| --> Set MPLS-TE link-TLV parameter: MPLS-TE metric. |
| |
| mpls-te link rsc-clsclr BITPATTERN |
| |
| --> Set MPLS-TE link-TLV parameter: Resource Class/Color. |
| In 32-bit hexadecimal format, with leading "0x" (0x0 - 0xffffffff) |
| |
| mpls-te link unrsv-bw <0-7> BANDWIDTH |
| |
| --> Set MPLS-TE link-TLV parameter: Unreserved Bandwidth (Bytes/sec). |
| In integer or floating point format (1000, or 1.0e3) |
| |
| router(config-if)# exit |
| router(config)# router ospf |
| router(config-router)# |
| |
| mpls-te |
| |
| --> Enable MPLS-TE functionality. |
| Note that master-switch "ospf opaque-lsa" must also be specified. |
| |
| mpls-te on |
| |
| --> Alias of "mpls-te" command. |
| |
| mpls-te router-address A.B.C.D |
| |
| --> Set MPLS-TE Router-TLV parameter: Router Address. |
| |
| no mpls-te |
| |
| --> Disable MPLS-TE functionality. |
| |
| no ospf opaque-lsa |
| |
| --> Disable Opaque-LSAs capability. |
| This node behaves Opaque-incapable node. |
| |
| ospf opaque-lsa |
| |
| --> Enable Opaque-LSAs capability. |
| This is the master-switch to make this node Opaque-capable. |
| |
| router# exit |