| /* RIP version 1 and 2. |
| * Copyright (C) 2005 6WIND <alain.ritoux@6wind.com> |
| * Copyright (C) 1997, 98, 99 Kunihiro Ishiguro <kunihiro@zebra.org> |
| * |
| * This file is part of GNU Zebra. |
| * |
| * GNU Zebra is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2, or (at your option) any |
| * later version. |
| * |
| * GNU Zebra is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with GNU Zebra; see the file COPYING. If not, write to the Free |
| * Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA |
| * 02111-1307, USA. |
| */ |
| |
| #include <zebra.h> |
| |
| #include "if.h" |
| #include "command.h" |
| #include "prefix.h" |
| #include "table.h" |
| #include "thread.h" |
| #include "memory.h" |
| #include "log.h" |
| #include "stream.h" |
| #include "filter.h" |
| #include "sockunion.h" |
| #include "sockopt.h" |
| #include "routemap.h" |
| #include "if_rmap.h" |
| #include "plist.h" |
| #include "distribute.h" |
| #include "md5.h" |
| #include "keychain.h" |
| #include "privs.h" |
| |
| #include "ripd/ripd.h" |
| #include "ripd/rip_debug.h" |
| |
| /* UDP receive buffer size */ |
| #define RIP_UDP_RCV_BUF 41600 |
| |
| /* privileges global */ |
| extern struct zebra_privs_t ripd_privs; |
| |
| /* RIP Structure. */ |
| struct rip *rip = NULL; |
| |
| /* RIP neighbor address table. */ |
| struct route_table *rip_neighbor_table; |
| |
| /* RIP route changes. */ |
| long rip_global_route_changes = 0; |
| |
| /* RIP queries. */ |
| long rip_global_queries = 0; |
| |
| /* Prototypes. */ |
| static void rip_event (enum rip_event, int); |
| static void rip_output_process (struct connected *, struct sockaddr_in *, int, u_char); |
| static int rip_triggered_update (struct thread *); |
| static int rip_update_jitter (unsigned long); |
| |
| /* RIP output routes type. */ |
| enum |
| { |
| rip_all_route, |
| rip_changed_route |
| }; |
| |
| /* RIP command strings. */ |
| static const struct message rip_msg[] = |
| { |
| {RIP_REQUEST, "REQUEST"}, |
| {RIP_RESPONSE, "RESPONSE"}, |
| {RIP_TRACEON, "TRACEON"}, |
| {RIP_TRACEOFF, "TRACEOFF"}, |
| {RIP_POLL, "POLL"}, |
| {RIP_POLL_ENTRY, "POLL ENTRY"}, |
| {0, NULL}, |
| }; |
| |
| /* Utility function to set boradcast option to the socket. */ |
| static int |
| sockopt_broadcast (int sock) |
| { |
| int ret; |
| int on = 1; |
| |
| ret = setsockopt (sock, SOL_SOCKET, SO_BROADCAST, (char *) &on, sizeof on); |
| if (ret < 0) |
| { |
| zlog_warn ("can't set sockopt SO_BROADCAST to socket %d", sock); |
| return -1; |
| } |
| return 0; |
| } |
| |
| static int |
| rip_route_rte (struct rip_info *rinfo) |
| { |
| return (rinfo->type == ZEBRA_ROUTE_RIP && rinfo->sub_type == RIP_ROUTE_RTE); |
| } |
| |
| static struct rip_info * |
| rip_info_new (void) |
| { |
| return XCALLOC (MTYPE_RIP_INFO, sizeof (struct rip_info)); |
| } |
| |
| void |
| rip_info_free (struct rip_info *rinfo) |
| { |
| XFREE (MTYPE_RIP_INFO, rinfo); |
| } |
| |
| /* RIP route garbage collect timer. */ |
| static int |
| rip_garbage_collect (struct thread *t) |
| { |
| struct rip_info *rinfo; |
| struct route_node *rp; |
| |
| rinfo = THREAD_ARG (t); |
| rinfo->t_garbage_collect = NULL; |
| |
| /* Off timeout timer. */ |
| RIP_TIMER_OFF (rinfo->t_timeout); |
| |
| /* Get route_node pointer. */ |
| rp = rinfo->rp; |
| |
| /* Unlock route_node. */ |
| listnode_delete (rp->info, rinfo); |
| if (list_isempty ((struct list *)rp->info)) |
| { |
| list_free (rp->info); |
| rp->info = NULL; |
| route_unlock_node (rp); |
| } |
| |
| /* Free RIP routing information. */ |
| rip_info_free (rinfo); |
| |
| return 0; |
| } |
| |
| static void rip_timeout_update (struct rip_info *rinfo); |
| |
| /* Add new route to the ECMP list. |
| * RETURN: the new entry added in the list, or NULL if it is not the first |
| * entry and ECMP is not allowed. |
| */ |
| struct rip_info * |
| rip_ecmp_add (struct rip_info *rinfo_new) |
| { |
| struct route_node *rp = rinfo_new->rp; |
| struct rip_info *rinfo = NULL; |
| struct list *list = NULL; |
| |
| if (rp->info == NULL) |
| rp->info = list_new (); |
| list = (struct list *)rp->info; |
| |
| /* If ECMP is not allowed and some entry already exists in the list, |
| * do nothing. */ |
| if (listcount (list) && !rip->ecmp) |
| return NULL; |
| |
| rinfo = rip_info_new (); |
| memcpy (rinfo, rinfo_new, sizeof (struct rip_info)); |
| listnode_add (list, rinfo); |
| |
| if (rip_route_rte (rinfo)) |
| { |
| rip_timeout_update (rinfo); |
| rip_zebra_ipv4_add (rp); |
| } |
| |
| /* Set the route change flag on the first entry. */ |
| rinfo = listgetdata (listhead (list)); |
| SET_FLAG (rinfo->flags, RIP_RTF_CHANGED); |
| |
| /* Signal the output process to trigger an update (see section 2.5). */ |
| rip_event (RIP_TRIGGERED_UPDATE, 0); |
| |
| return rinfo; |
| } |
| |
| /* Replace the ECMP list with the new route. |
| * RETURN: the new entry added in the list |
| */ |
| struct rip_info * |
| rip_ecmp_replace (struct rip_info *rinfo_new) |
| { |
| struct route_node *rp = rinfo_new->rp; |
| struct list *list = (struct list *)rp->info; |
| struct rip_info *rinfo = NULL, *tmp_rinfo = NULL; |
| struct listnode *node = NULL, *nextnode = NULL; |
| |
| if (list == NULL || listcount (list) == 0) |
| return rip_ecmp_add (rinfo_new); |
| |
| /* Get the first entry */ |
| rinfo = listgetdata (listhead (list)); |
| |
| /* Learnt route replaced by a local one. Delete it from zebra. */ |
| if (rip_route_rte (rinfo) && !rip_route_rte (rinfo_new)) |
| if (CHECK_FLAG (rinfo->flags, RIP_RTF_FIB)) |
| rip_zebra_ipv4_delete (rp); |
| |
| /* Re-use the first entry, and delete the others. */ |
| for (ALL_LIST_ELEMENTS (list, node, nextnode, tmp_rinfo)) |
| if (tmp_rinfo != rinfo) |
| { |
| RIP_TIMER_OFF (tmp_rinfo->t_timeout); |
| RIP_TIMER_OFF (tmp_rinfo->t_garbage_collect); |
| list_delete_node (list, node); |
| rip_info_free (tmp_rinfo); |
| } |
| |
| RIP_TIMER_OFF (rinfo->t_timeout); |
| RIP_TIMER_OFF (rinfo->t_garbage_collect); |
| memcpy (rinfo, rinfo_new, sizeof (struct rip_info)); |
| |
| if (rip_route_rte (rinfo)) |
| { |
| rip_timeout_update (rinfo); |
| /* The ADD message implies an update. */ |
| rip_zebra_ipv4_add (rp); |
| } |
| |
| /* Set the route change flag. */ |
| SET_FLAG (rinfo->flags, RIP_RTF_CHANGED); |
| |
| /* Signal the output process to trigger an update (see section 2.5). */ |
| rip_event (RIP_TRIGGERED_UPDATE, 0); |
| |
| return rinfo; |
| } |
| |
| /* Delete one route from the ECMP list. |
| * RETURN: |
| * null - the entry is freed, and other entries exist in the list |
| * the entry - the entry is the last one in the list; its metric is set |
| * to INFINITY, and the garbage collector is started for it |
| */ |
| struct rip_info * |
| rip_ecmp_delete (struct rip_info *rinfo) |
| { |
| struct route_node *rp = rinfo->rp; |
| struct list *list = (struct list *)rp->info; |
| |
| RIP_TIMER_OFF (rinfo->t_timeout); |
| |
| if (listcount (list) > 1) |
| { |
| /* Some other ECMP entries still exist. Just delete this entry. */ |
| RIP_TIMER_OFF (rinfo->t_garbage_collect); |
| listnode_delete (list, rinfo); |
| if (rip_route_rte (rinfo) && CHECK_FLAG (rinfo->flags, RIP_RTF_FIB)) |
| /* The ADD message implies the update. */ |
| rip_zebra_ipv4_add (rp); |
| rip_info_free (rinfo); |
| rinfo = NULL; |
| } |
| else |
| { |
| assert (rinfo == listgetdata (listhead (list))); |
| |
| /* This is the only entry left in the list. We must keep it in |
| * the list for garbage collection time, with INFINITY metric. */ |
| |
| rinfo->metric = RIP_METRIC_INFINITY; |
| RIP_TIMER_ON (rinfo->t_garbage_collect, |
| rip_garbage_collect, rip->garbage_time); |
| |
| if (rip_route_rte (rinfo) && CHECK_FLAG (rinfo->flags, RIP_RTF_FIB)) |
| rip_zebra_ipv4_delete (rp); |
| } |
| |
| /* Set the route change flag on the first entry. */ |
| rinfo = listgetdata (listhead (list)); |
| SET_FLAG (rinfo->flags, RIP_RTF_CHANGED); |
| |
| /* Signal the output process to trigger an update (see section 2.5). */ |
| rip_event (RIP_TRIGGERED_UPDATE, 0); |
| |
| return rinfo; |
| } |
| |
| /* Timeout RIP routes. */ |
| static int |
| rip_timeout (struct thread *t) |
| { |
| rip_ecmp_delete ((struct rip_info *)THREAD_ARG (t)); |
| return 0; |
| } |
| |
| static void |
| rip_timeout_update (struct rip_info *rinfo) |
| { |
| if (rinfo->metric != RIP_METRIC_INFINITY) |
| { |
| RIP_TIMER_OFF (rinfo->t_timeout); |
| RIP_TIMER_ON (rinfo->t_timeout, rip_timeout, rip->timeout_time); |
| } |
| } |
| |
| static int |
| rip_incoming_filter (struct prefix_ipv4 *p, struct rip_interface *ri) |
| { |
| struct distribute *dist; |
| struct access_list *alist; |
| struct prefix_list *plist; |
| |
| /* Input distribute-list filtering. */ |
| if (ri->list[RIP_FILTER_IN]) |
| { |
| if (access_list_apply (ri->list[RIP_FILTER_IN], |
| (struct prefix *) p) == FILTER_DENY) |
| { |
| if (IS_RIP_DEBUG_PACKET) |
| zlog_debug ("%s/%d filtered by distribute in", |
| inet_ntoa (p->prefix), p->prefixlen); |
| return -1; |
| } |
| } |
| if (ri->prefix[RIP_FILTER_IN]) |
| { |
| if (prefix_list_apply (ri->prefix[RIP_FILTER_IN], |
| (struct prefix *) p) == PREFIX_DENY) |
| { |
| if (IS_RIP_DEBUG_PACKET) |
| zlog_debug ("%s/%d filtered by prefix-list in", |
| inet_ntoa (p->prefix), p->prefixlen); |
| return -1; |
| } |
| } |
| |
| /* All interface filter check. */ |
| dist = distribute_lookup (NULL); |
| if (dist) |
| { |
| if (dist->list[DISTRIBUTE_IN]) |
| { |
| alist = access_list_lookup (AFI_IP, dist->list[DISTRIBUTE_IN]); |
| |
| if (alist) |
| { |
| if (access_list_apply (alist, |
| (struct prefix *) p) == FILTER_DENY) |
| { |
| if (IS_RIP_DEBUG_PACKET) |
| zlog_debug ("%s/%d filtered by distribute in", |
| inet_ntoa (p->prefix), p->prefixlen); |
| return -1; |
| } |
| } |
| } |
| if (dist->prefix[DISTRIBUTE_IN]) |
| { |
| plist = prefix_list_lookup (AFI_IP, dist->prefix[DISTRIBUTE_IN]); |
| |
| if (plist) |
| { |
| if (prefix_list_apply (plist, |
| (struct prefix *) p) == PREFIX_DENY) |
| { |
| if (IS_RIP_DEBUG_PACKET) |
| zlog_debug ("%s/%d filtered by prefix-list in", |
| inet_ntoa (p->prefix), p->prefixlen); |
| return -1; |
| } |
| } |
| } |
| } |
| return 0; |
| } |
| |
| static int |
| rip_outgoing_filter (struct prefix_ipv4 *p, struct rip_interface *ri) |
| { |
| struct distribute *dist; |
| struct access_list *alist; |
| struct prefix_list *plist; |
| |
| if (ri->list[RIP_FILTER_OUT]) |
| { |
| if (access_list_apply (ri->list[RIP_FILTER_OUT], |
| (struct prefix *) p) == FILTER_DENY) |
| { |
| if (IS_RIP_DEBUG_PACKET) |
| zlog_debug ("%s/%d is filtered by distribute out", |
| inet_ntoa (p->prefix), p->prefixlen); |
| return -1; |
| } |
| } |
| if (ri->prefix[RIP_FILTER_OUT]) |
| { |
| if (prefix_list_apply (ri->prefix[RIP_FILTER_OUT], |
| (struct prefix *) p) == PREFIX_DENY) |
| { |
| if (IS_RIP_DEBUG_PACKET) |
| zlog_debug ("%s/%d is filtered by prefix-list out", |
| inet_ntoa (p->prefix), p->prefixlen); |
| return -1; |
| } |
| } |
| |
| /* All interface filter check. */ |
| dist = distribute_lookup (NULL); |
| if (dist) |
| { |
| if (dist->list[DISTRIBUTE_OUT]) |
| { |
| alist = access_list_lookup (AFI_IP, dist->list[DISTRIBUTE_OUT]); |
| |
| if (alist) |
| { |
| if (access_list_apply (alist, |
| (struct prefix *) p) == FILTER_DENY) |
| { |
| if (IS_RIP_DEBUG_PACKET) |
| zlog_debug ("%s/%d filtered by distribute out", |
| inet_ntoa (p->prefix), p->prefixlen); |
| return -1; |
| } |
| } |
| } |
| if (dist->prefix[DISTRIBUTE_OUT]) |
| { |
| plist = prefix_list_lookup (AFI_IP, dist->prefix[DISTRIBUTE_OUT]); |
| |
| if (plist) |
| { |
| if (prefix_list_apply (plist, |
| (struct prefix *) p) == PREFIX_DENY) |
| { |
| if (IS_RIP_DEBUG_PACKET) |
| zlog_debug ("%s/%d filtered by prefix-list out", |
| inet_ntoa (p->prefix), p->prefixlen); |
| return -1; |
| } |
| } |
| } |
| } |
| return 0; |
| } |
| |
| /* Check nexthop address validity. */ |
| static int |
| rip_nexthop_check (struct in_addr *addr) |
| { |
| struct listnode *node; |
| struct listnode *cnode; |
| struct interface *ifp; |
| struct connected *ifc; |
| struct prefix *p; |
| |
| /* If nexthop address matches local configured address then it is |
| invalid nexthop. */ |
| for (ALL_LIST_ELEMENTS_RO (iflist, node, ifp)) |
| { |
| for (ALL_LIST_ELEMENTS_RO (ifp->connected, cnode, ifc)) |
| { |
| p = ifc->address; |
| |
| if (p->family == AF_INET |
| && IPV4_ADDR_SAME (&p->u.prefix4, addr)) |
| return -1; |
| } |
| } |
| return 0; |
| } |
| |
| /* RIP add route to routing table. */ |
| static void |
| rip_rte_process (struct rte *rte, struct sockaddr_in *from, |
| struct interface *ifp) |
| { |
| int ret; |
| struct prefix_ipv4 p; |
| struct route_node *rp; |
| struct rip_info *rinfo = NULL, newinfo; |
| struct rip_interface *ri; |
| struct in_addr *nexthop; |
| int same = 0; |
| unsigned char old_dist, new_dist; |
| struct list *list = NULL; |
| struct listnode *node = NULL; |
| |
| /* Make prefix structure. */ |
| memset (&p, 0, sizeof (struct prefix_ipv4)); |
| p.family = AF_INET; |
| p.prefix = rte->prefix; |
| p.prefixlen = ip_masklen (rte->mask); |
| |
| /* Make sure mask is applied. */ |
| apply_mask_ipv4 (&p); |
| |
| /* Apply input filters. */ |
| ri = ifp->info; |
| |
| ret = rip_incoming_filter (&p, ri); |
| if (ret < 0) |
| return; |
| |
| memset (&newinfo, 0, sizeof (newinfo)); |
| newinfo.type = ZEBRA_ROUTE_RIP; |
| newinfo.sub_type = RIP_ROUTE_RTE; |
| newinfo.nexthop = rte->nexthop; |
| newinfo.from = from->sin_addr; |
| newinfo.ifindex = ifp->ifindex; |
| newinfo.metric = rte->metric; |
| newinfo.metric_out = rte->metric; /* XXX */ |
| newinfo.tag = ntohs (rte->tag); /* XXX */ |
| |
| /* Modify entry according to the interface routemap. */ |
| if (ri->routemap[RIP_FILTER_IN]) |
| { |
| int ret; |
| |
| /* The object should be of the type of rip_info */ |
| ret = route_map_apply (ri->routemap[RIP_FILTER_IN], |
| (struct prefix *) &p, RMAP_RIP, &newinfo); |
| |
| if (ret == RMAP_DENYMATCH) |
| { |
| if (IS_RIP_DEBUG_PACKET) |
| zlog_debug ("RIP %s/%d is filtered by route-map in", |
| inet_ntoa (p.prefix), p.prefixlen); |
| return; |
| } |
| |
| /* Get back the object */ |
| rte->nexthop = newinfo.nexthop_out; |
| rte->tag = htons (newinfo.tag_out); /* XXX */ |
| rte->metric = newinfo.metric_out; /* XXX: the routemap uses the metric_out field */ |
| } |
| |
| /* Once the entry has been validated, update the metric by |
| adding the cost of the network on wich the message |
| arrived. If the result is greater than infinity, use infinity |
| (RFC2453 Sec. 3.9.2) */ |
| /* Zebra ripd can handle offset-list in. */ |
| ret = rip_offset_list_apply_in (&p, ifp, &rte->metric); |
| |
| /* If offset-list does not modify the metric use interface's |
| metric. */ |
| if (!ret) |
| rte->metric += ifp->metric ? ifp->metric : 1; |
| |
| if (rte->metric > RIP_METRIC_INFINITY) |
| rte->metric = RIP_METRIC_INFINITY; |
| |
| /* Set nexthop pointer. */ |
| if (rte->nexthop.s_addr == 0) |
| nexthop = &from->sin_addr; |
| else |
| nexthop = &rte->nexthop; |
| |
| /* Check if nexthop address is myself, then do nothing. */ |
| if (rip_nexthop_check (nexthop) < 0) |
| { |
| if (IS_RIP_DEBUG_PACKET) |
| zlog_debug ("Nexthop address %s is myself", inet_ntoa (*nexthop)); |
| return; |
| } |
| |
| /* Get index for the prefix. */ |
| rp = route_node_get (rip->table, (struct prefix *) &p); |
| |
| newinfo.rp = rp; |
| newinfo.nexthop = *nexthop; |
| newinfo.metric = rte->metric; |
| newinfo.tag = ntohs (rte->tag); |
| newinfo.distance = rip_distance_apply (&newinfo); |
| |
| new_dist = newinfo.distance ? newinfo.distance : ZEBRA_RIP_DISTANCE_DEFAULT; |
| |
| /* Check to see whether there is already RIP route on the table. */ |
| if ((list = rp->info) != NULL) |
| for (ALL_LIST_ELEMENTS_RO (list, node, rinfo)) |
| { |
| /* Need to compare with redistributed entry or local entry */ |
| if (!rip_route_rte (rinfo)) |
| break; |
| |
| if (IPV4_ADDR_SAME (&rinfo->from, &from->sin_addr) && |
| IPV4_ADDR_SAME (&rinfo->nexthop, nexthop)) |
| break; |
| |
| if (!listnextnode (node)) |
| { |
| /* Not found in the list */ |
| |
| if (rte->metric > rinfo->metric) |
| { |
| /* New route has a greater metric. Discard it. */ |
| route_unlock_node (rp); |
| return; |
| } |
| |
| if (rte->metric < rinfo->metric) |
| /* New route has a smaller metric. Replace the ECMP list |
| * with the new one in below. */ |
| break; |
| |
| /* Metrics are same. We compare the distances. */ |
| old_dist = rinfo->distance ? \ |
| rinfo->distance : ZEBRA_RIP_DISTANCE_DEFAULT; |
| |
| if (new_dist > old_dist) |
| { |
| /* New route has a greater distance. Discard it. */ |
| route_unlock_node (rp); |
| return; |
| } |
| |
| if (new_dist < old_dist) |
| /* New route has a smaller distance. Replace the ECMP list |
| * with the new one in below. */ |
| break; |
| |
| /* Metrics and distances are both same. Keep "rinfo" null and |
| * the new route is added in the ECMP list in below. */ |
| } |
| } |
| |
| if (rinfo) |
| { |
| /* Local static route. */ |
| if (rinfo->type == ZEBRA_ROUTE_RIP |
| && ((rinfo->sub_type == RIP_ROUTE_STATIC) || |
| (rinfo->sub_type == RIP_ROUTE_DEFAULT)) |
| && rinfo->metric != RIP_METRIC_INFINITY) |
| { |
| route_unlock_node (rp); |
| return; |
| } |
| |
| /* Redistributed route check. */ |
| if (rinfo->type != ZEBRA_ROUTE_RIP |
| && rinfo->metric != RIP_METRIC_INFINITY) |
| { |
| old_dist = rinfo->distance; |
| /* Only routes directly connected to an interface (nexthop == 0) |
| * may have a valid NULL distance */ |
| if (rinfo->nexthop.s_addr != 0) |
| old_dist = old_dist ? old_dist : ZEBRA_RIP_DISTANCE_DEFAULT; |
| /* If imported route does not have STRICT precedence, |
| mark it as a ghost */ |
| if (new_dist <= old_dist && rte->metric != RIP_METRIC_INFINITY) |
| rip_ecmp_replace (&newinfo); |
| |
| route_unlock_node (rp); |
| return; |
| } |
| } |
| |
| if (!rinfo) |
| { |
| if (rp->info) |
| route_unlock_node (rp); |
| |
| /* Now, check to see whether there is already an explicit route |
| for the destination prefix. If there is no such route, add |
| this route to the routing table, unless the metric is |
| infinity (there is no point in adding a route which |
| unusable). */ |
| if (rte->metric != RIP_METRIC_INFINITY) |
| rip_ecmp_add (&newinfo); |
| } |
| else |
| { |
| /* Route is there but we are not sure the route is RIP or not. */ |
| |
| /* If there is an existing route, compare the next hop address |
| to the address of the router from which the datagram came. |
| If this datagram is from the same router as the existing |
| route, reinitialize the timeout. */ |
| same = (IPV4_ADDR_SAME (&rinfo->from, &from->sin_addr) |
| && (rinfo->ifindex == ifp->ifindex)); |
| |
| old_dist = rinfo->distance ? \ |
| rinfo->distance : ZEBRA_RIP_DISTANCE_DEFAULT; |
| |
| /* Next, compare the metrics. If the datagram is from the same |
| router as the existing route, and the new metric is different |
| than the old one; or, if the new metric is lower than the old |
| one, or if the tag has been changed; or if there is a route |
| with a lower administrave distance; or an update of the |
| distance on the actual route; do the following actions: */ |
| if ((same && rinfo->metric != rte->metric) |
| || (rte->metric < rinfo->metric) |
| || ((same) |
| && (rinfo->metric == rte->metric) |
| && (newinfo.tag != rinfo->tag)) |
| || (old_dist > new_dist) |
| || ((old_dist != new_dist) && same)) |
| { |
| if (listcount (list) == 1) |
| { |
| if (newinfo.metric != RIP_METRIC_INFINITY) |
| rip_ecmp_replace (&newinfo); |
| else |
| rip_ecmp_delete (rinfo); |
| } |
| else |
| { |
| if (newinfo.metric < rinfo->metric) |
| rip_ecmp_replace (&newinfo); |
| else if (newinfo.metric > rinfo->metric) |
| rip_ecmp_delete (rinfo); |
| else if (new_dist < old_dist) |
| rip_ecmp_replace (&newinfo); |
| else if (new_dist > old_dist) |
| rip_ecmp_delete (rinfo); |
| else |
| { |
| int update = CHECK_FLAG (rinfo->flags, RIP_RTF_FIB) ? 1 : 0; |
| |
| assert (newinfo.metric != RIP_METRIC_INFINITY); |
| |
| RIP_TIMER_OFF (rinfo->t_timeout); |
| RIP_TIMER_OFF (rinfo->t_garbage_collect); |
| memcpy (rinfo, &newinfo, sizeof (struct rip_info)); |
| rip_timeout_update (rinfo); |
| |
| if (update) |
| rip_zebra_ipv4_add (rp); |
| |
| /* - Set the route change flag on the first entry. */ |
| rinfo = listgetdata (listhead (list)); |
| SET_FLAG (rinfo->flags, RIP_RTF_CHANGED); |
| rip_event (RIP_TRIGGERED_UPDATE, 0); |
| } |
| } |
| } |
| else /* same & no change */ |
| rip_timeout_update (rinfo); |
| |
| /* Unlock tempolary lock of the route. */ |
| route_unlock_node (rp); |
| } |
| } |
| |
| /* Dump RIP packet */ |
| static void |
| rip_packet_dump (struct rip_packet *packet, int size, const char *sndrcv) |
| { |
| caddr_t lim; |
| struct rte *rte; |
| const char *command_str; |
| char pbuf[BUFSIZ], nbuf[BUFSIZ]; |
| u_char netmask = 0; |
| u_char *p; |
| |
| /* Set command string. */ |
| if (packet->command > 0 && packet->command < RIP_COMMAND_MAX) |
| command_str = lookup (rip_msg, packet->command); |
| else |
| command_str = "unknown"; |
| |
| /* Dump packet header. */ |
| zlog_debug ("%s %s version %d packet size %d", |
| sndrcv, command_str, packet->version, size); |
| |
| /* Dump each routing table entry. */ |
| rte = packet->rte; |
| |
| for (lim = (caddr_t) packet + size; (caddr_t) rte < lim; rte++) |
| { |
| if (packet->version == RIPv2) |
| { |
| netmask = ip_masklen (rte->mask); |
| |
| if (rte->family == htons (RIP_FAMILY_AUTH)) |
| { |
| if (rte->tag == htons (RIP_AUTH_SIMPLE_PASSWORD)) |
| { |
| p = (u_char *)&rte->prefix; |
| |
| zlog_debug (" family 0x%X type %d auth string: %s", |
| ntohs (rte->family), ntohs (rte->tag), p); |
| } |
| else if (rte->tag == htons (RIP_AUTH_MD5)) |
| { |
| struct rip_md5_info *md5; |
| |
| md5 = (struct rip_md5_info *) &packet->rte; |
| |
| zlog_debug (" family 0x%X type %d (MD5 authentication)", |
| ntohs (md5->family), ntohs (md5->type)); |
| zlog_debug (" RIP-2 packet len %d Key ID %d" |
| " Auth Data len %d", |
| ntohs (md5->packet_len), md5->keyid, |
| md5->auth_len); |
| zlog_debug (" Sequence Number %ld", |
| (u_long) ntohl (md5->sequence)); |
| } |
| else if (rte->tag == htons (RIP_AUTH_DATA)) |
| { |
| p = (u_char *)&rte->prefix; |
| |
| zlog_debug (" family 0x%X type %d (MD5 data)", |
| ntohs (rte->family), ntohs (rte->tag)); |
| zlog_debug (" MD5: %02X%02X%02X%02X%02X%02X%02X%02X" |
| "%02X%02X%02X%02X%02X%02X%02X", |
| p[0], p[1], p[2], p[3], p[4], p[5], p[6], |
| p[7], p[9], p[10], p[11], p[12], p[13], |
| p[14], p[15]); |
| } |
| else |
| { |
| zlog_debug (" family 0x%X type %d (Unknown auth type)", |
| ntohs (rte->family), ntohs (rte->tag)); |
| } |
| } |
| else |
| zlog_debug (" %s/%d -> %s family %d tag %d metric %ld", |
| inet_ntop (AF_INET, &rte->prefix, pbuf, BUFSIZ), |
| netmask, inet_ntop (AF_INET, &rte->nexthop, nbuf, |
| BUFSIZ), ntohs (rte->family), |
| ntohs (rte->tag), (u_long) ntohl (rte->metric)); |
| } |
| else |
| { |
| zlog_debug (" %s family %d tag %d metric %ld", |
| inet_ntop (AF_INET, &rte->prefix, pbuf, BUFSIZ), |
| ntohs (rte->family), ntohs (rte->tag), |
| (u_long)ntohl (rte->metric)); |
| } |
| } |
| } |
| |
| /* Check if the destination address is valid (unicast; not net 0 |
| or 127) (RFC2453 Section 3.9.2 - Page 26). But we don't |
| check net 0 because we accept default route. */ |
| static int |
| rip_destination_check (struct in_addr addr) |
| { |
| u_int32_t destination; |
| |
| /* Convert to host byte order. */ |
| destination = ntohl (addr.s_addr); |
| |
| if (IPV4_NET127 (destination)) |
| return 0; |
| |
| /* Net 0 may match to the default route. */ |
| if (IPV4_NET0 (destination) && destination != 0) |
| return 0; |
| |
| /* Unicast address must belong to class A, B, C. */ |
| if (IN_CLASSA (destination)) |
| return 1; |
| if (IN_CLASSB (destination)) |
| return 1; |
| if (IN_CLASSC (destination)) |
| return 1; |
| |
| return 0; |
| } |
| |
| /* RIP version 2 authentication. */ |
| static int |
| rip_auth_simple_password (struct rte *rte, struct sockaddr_in *from, |
| struct interface *ifp) |
| { |
| struct rip_interface *ri; |
| char *auth_str; |
| |
| if (IS_RIP_DEBUG_EVENT) |
| zlog_debug ("RIPv2 simple password authentication from %s", |
| inet_ntoa (from->sin_addr)); |
| |
| ri = ifp->info; |
| |
| if (ri->auth_type != RIP_AUTH_SIMPLE_PASSWORD |
| || rte->tag != htons(RIP_AUTH_SIMPLE_PASSWORD)) |
| return 0; |
| |
| /* Simple password authentication. */ |
| if (ri->auth_str) |
| { |
| auth_str = (char *) &rte->prefix; |
| |
| if (strncmp (auth_str, ri->auth_str, 16) == 0) |
| return 1; |
| } |
| if (ri->key_chain) |
| { |
| struct keychain *keychain; |
| struct key *key; |
| |
| keychain = keychain_lookup (ri->key_chain); |
| if (keychain == NULL) |
| return 0; |
| |
| key = key_match_for_accept (keychain, (char *) &rte->prefix); |
| if (key) |
| return 1; |
| } |
| return 0; |
| } |
| |
| /* RIP version 2 authentication with MD5. */ |
| static int |
| rip_auth_md5 (struct rip_packet *packet, struct sockaddr_in *from, |
| int length, struct interface *ifp) |
| { |
| struct rip_interface *ri; |
| struct rip_md5_info *md5; |
| struct rip_md5_data *md5data; |
| struct keychain *keychain; |
| struct key *key; |
| MD5_CTX ctx; |
| u_char digest[RIP_AUTH_MD5_SIZE]; |
| u_int16_t packet_len; |
| char auth_str[RIP_AUTH_MD5_SIZE]; |
| |
| if (IS_RIP_DEBUG_EVENT) |
| zlog_debug ("RIPv2 MD5 authentication from %s", |
| inet_ntoa (from->sin_addr)); |
| |
| ri = ifp->info; |
| md5 = (struct rip_md5_info *) &packet->rte; |
| |
| /* Check auth type. */ |
| if (ri->auth_type != RIP_AUTH_MD5 || md5->type != htons(RIP_AUTH_MD5)) |
| return 0; |
| |
| /* If the authentication length is less than 16, then it must be wrong for |
| * any interpretation of rfc2082. Some implementations also interpret |
| * this as RIP_HEADER_SIZE+ RIP_AUTH_MD5_SIZE, aka RIP_AUTH_MD5_COMPAT_SIZE. |
| */ |
| if ( !((md5->auth_len == RIP_AUTH_MD5_SIZE) |
| || (md5->auth_len == RIP_AUTH_MD5_COMPAT_SIZE))) |
| { |
| if (IS_RIP_DEBUG_EVENT) |
| zlog_debug ("RIPv2 MD5 authentication, strange authentication " |
| "length field %d", md5->auth_len); |
| return 0; |
| } |
| |
| /* grab and verify check packet length */ |
| packet_len = ntohs (md5->packet_len); |
| |
| if (packet_len > (length - RIP_HEADER_SIZE - RIP_AUTH_MD5_SIZE)) |
| { |
| if (IS_RIP_DEBUG_EVENT) |
| zlog_debug ("RIPv2 MD5 authentication, packet length field %d " |
| "greater than received length %d!", |
| md5->packet_len, length); |
| return 0; |
| } |
| |
| /* retrieve authentication data */ |
| md5data = (struct rip_md5_data *) (((u_char *) packet) + packet_len); |
| |
| memset (auth_str, 0, RIP_AUTH_MD5_SIZE); |
| |
| if (ri->key_chain) |
| { |
| keychain = keychain_lookup (ri->key_chain); |
| if (keychain == NULL) |
| return 0; |
| |
| key = key_lookup_for_accept (keychain, md5->keyid); |
| if (key == NULL) |
| return 0; |
| |
| strncpy (auth_str, key->string, RIP_AUTH_MD5_SIZE); |
| } |
| else if (ri->auth_str) |
| strncpy (auth_str, ri->auth_str, RIP_AUTH_MD5_SIZE); |
| |
| if (auth_str[0] == 0) |
| return 0; |
| |
| /* MD5 digest authentication. */ |
| memset (&ctx, 0, sizeof(ctx)); |
| MD5Init(&ctx); |
| MD5Update(&ctx, packet, packet_len + RIP_HEADER_SIZE); |
| MD5Update(&ctx, auth_str, RIP_AUTH_MD5_SIZE); |
| MD5Final(digest, &ctx); |
| |
| if (memcmp (md5data->digest, digest, RIP_AUTH_MD5_SIZE) == 0) |
| return packet_len; |
| else |
| return 0; |
| } |
| |
| /* Pick correct auth string for sends, prepare auth_str buffer for use. |
| * (left justified and padded). |
| * |
| * presumes one of ri or key is valid, and that the auth strings they point |
| * to are nul terminated. If neither are present, auth_str will be fully |
| * zero padded. |
| * |
| */ |
| static void |
| rip_auth_prepare_str_send (struct rip_interface *ri, struct key *key, |
| char *auth_str, int len) |
| { |
| assert (ri || key); |
| |
| memset (auth_str, 0, len); |
| if (key && key->string) |
| strncpy (auth_str, key->string, len); |
| else if (ri->auth_str) |
| strncpy (auth_str, ri->auth_str, len); |
| |
| return; |
| } |
| |
| /* Write RIPv2 simple password authentication information |
| * |
| * auth_str is presumed to be 2 bytes and correctly prepared |
| * (left justified and zero padded). |
| */ |
| static void |
| rip_auth_simple_write (struct stream *s, char *auth_str, int len) |
| { |
| assert (s && len == RIP_AUTH_SIMPLE_SIZE); |
| |
| stream_putw (s, RIP_FAMILY_AUTH); |
| stream_putw (s, RIP_AUTH_SIMPLE_PASSWORD); |
| stream_put (s, auth_str, RIP_AUTH_SIMPLE_SIZE); |
| |
| return; |
| } |
| |
| /* write RIPv2 MD5 "authentication header" |
| * (uses the auth key data field) |
| * |
| * Digest offset field is set to 0. |
| * |
| * returns: offset of the digest offset field, which must be set when |
| * length to the auth-data MD5 digest is known. |
| */ |
| static size_t |
| rip_auth_md5_ah_write (struct stream *s, struct rip_interface *ri, |
| struct key *key) |
| { |
| size_t doff = 0; |
| |
| assert (s && ri && ri->auth_type == RIP_AUTH_MD5); |
| |
| /* MD5 authentication. */ |
| stream_putw (s, RIP_FAMILY_AUTH); |
| stream_putw (s, RIP_AUTH_MD5); |
| |
| /* MD5 AH digest offset field. |
| * |
| * Set to placeholder value here, to true value when RIP-2 Packet length |
| * is known. Actual value is set in .....(). |
| */ |
| doff = stream_get_endp(s); |
| stream_putw (s, 0); |
| |
| /* Key ID. */ |
| if (key) |
| stream_putc (s, key->index % 256); |
| else |
| stream_putc (s, 1); |
| |
| /* Auth Data Len. Set 16 for MD5 authentication data. Older ripds |
| * however expect RIP_HEADER_SIZE + RIP_AUTH_MD5_SIZE so we allow for this |
| * to be configurable. |
| */ |
| stream_putc (s, ri->md5_auth_len); |
| |
| /* Sequence Number (non-decreasing). */ |
| /* RFC2080: The value used in the sequence number is |
| arbitrary, but two suggestions are the time of the |
| message's creation or a simple message counter. */ |
| stream_putl (s, time (NULL)); |
| |
| /* Reserved field must be zero. */ |
| stream_putl (s, 0); |
| stream_putl (s, 0); |
| |
| return doff; |
| } |
| |
| /* If authentication is in used, write the appropriate header |
| * returns stream offset to which length must later be written |
| * or 0 if this is not required |
| */ |
| static size_t |
| rip_auth_header_write (struct stream *s, struct rip_interface *ri, |
| struct key *key, char *auth_str, int len) |
| { |
| assert (ri->auth_type != RIP_NO_AUTH); |
| |
| switch (ri->auth_type) |
| { |
| case RIP_AUTH_SIMPLE_PASSWORD: |
| rip_auth_prepare_str_send (ri, key, auth_str, len); |
| rip_auth_simple_write (s, auth_str, len); |
| return 0; |
| case RIP_AUTH_MD5: |
| return rip_auth_md5_ah_write (s, ri, key); |
| } |
| assert (1); |
| return 0; |
| } |
| |
| /* Write RIPv2 MD5 authentication data trailer */ |
| static void |
| rip_auth_md5_set (struct stream *s, struct rip_interface *ri, size_t doff, |
| char *auth_str, int authlen) |
| { |
| unsigned long len; |
| MD5_CTX ctx; |
| unsigned char digest[RIP_AUTH_MD5_SIZE]; |
| |
| /* Make it sure this interface is configured as MD5 |
| authentication. */ |
| assert ((ri->auth_type == RIP_AUTH_MD5) && (authlen == RIP_AUTH_MD5_SIZE)); |
| assert (doff > 0); |
| |
| /* Get packet length. */ |
| len = stream_get_endp(s); |
| |
| /* Check packet length. */ |
| if (len < (RIP_HEADER_SIZE + RIP_RTE_SIZE)) |
| { |
| zlog_err ("rip_auth_md5_set(): packet length %ld is less than minimum length.", len); |
| return; |
| } |
| |
| /* Set the digest offset length in the header */ |
| stream_putw_at (s, doff, len); |
| |
| /* Set authentication data. */ |
| stream_putw (s, RIP_FAMILY_AUTH); |
| stream_putw (s, RIP_AUTH_DATA); |
| |
| /* Generate a digest for the RIP packet. */ |
| memset(&ctx, 0, sizeof(ctx)); |
| MD5Init(&ctx); |
| MD5Update(&ctx, STREAM_DATA (s), stream_get_endp (s)); |
| MD5Update(&ctx, auth_str, RIP_AUTH_MD5_SIZE); |
| MD5Final(digest, &ctx); |
| |
| /* Copy the digest to the packet. */ |
| stream_write (s, digest, RIP_AUTH_MD5_SIZE); |
| } |
| |
| /* RIP routing information. */ |
| static void |
| rip_response_process (struct rip_packet *packet, int size, |
| struct sockaddr_in *from, struct connected *ifc) |
| { |
| caddr_t lim; |
| struct rte *rte; |
| struct prefix_ipv4 ifaddr; |
| struct prefix_ipv4 ifaddrclass; |
| int subnetted; |
| |
| memset(&ifaddr, 0, sizeof(ifaddr)); |
| /* We don't know yet. */ |
| subnetted = -1; |
| |
| /* The Response must be ignored if it is not from the RIP |
| port. (RFC2453 - Sec. 3.9.2)*/ |
| if (from->sin_port != htons(RIP_PORT_DEFAULT)) |
| { |
| zlog_info ("response doesn't come from RIP port: %d", |
| from->sin_port); |
| rip_peer_bad_packet (from); |
| return; |
| } |
| |
| /* The datagram's IPv4 source address should be checked to see |
| whether the datagram is from a valid neighbor; the source of the |
| datagram must be on a directly connected network (RFC2453 - Sec. 3.9.2) */ |
| if (if_lookup_address(from->sin_addr) == NULL) |
| { |
| zlog_info ("This datagram doesn't came from a valid neighbor: %s", |
| inet_ntoa (from->sin_addr)); |
| rip_peer_bad_packet (from); |
| return; |
| } |
| |
| /* It is also worth checking to see whether the response is from one |
| of the router's own addresses. */ |
| |
| ; /* Alredy done in rip_read () */ |
| |
| /* Update RIP peer. */ |
| rip_peer_update (from, packet->version); |
| |
| /* Set RTE pointer. */ |
| rte = packet->rte; |
| |
| for (lim = (caddr_t) packet + size; (caddr_t) rte < lim; rte++) |
| { |
| /* RIPv2 authentication check. */ |
| /* If the Address Family Identifier of the first (and only the |
| first) entry in the message is 0xFFFF, then the remainder of |
| the entry contains the authentication. */ |
| /* If the packet gets here it means authentication enabled */ |
| /* Check is done in rip_read(). So, just skipping it */ |
| if (packet->version == RIPv2 && |
| rte == packet->rte && |
| rte->family == htons(RIP_FAMILY_AUTH)) |
| continue; |
| |
| if (rte->family != htons(AF_INET)) |
| { |
| /* Address family check. RIP only supports AF_INET. */ |
| zlog_info ("Unsupported family %d from %s.", |
| ntohs (rte->family), inet_ntoa (from->sin_addr)); |
| continue; |
| } |
| |
| /* - is the destination address valid (e.g., unicast; not net 0 |
| or 127) */ |
| if (! rip_destination_check (rte->prefix)) |
| { |
| zlog_info ("Network is net 0 or net 127 or it is not unicast network"); |
| rip_peer_bad_route (from); |
| continue; |
| } |
| |
| /* Convert metric value to host byte order. */ |
| rte->metric = ntohl (rte->metric); |
| |
| /* - is the metric valid (i.e., between 1 and 16, inclusive) */ |
| if (! (rte->metric >= 1 && rte->metric <= 16)) |
| { |
| zlog_info ("Route's metric is not in the 1-16 range."); |
| rip_peer_bad_route (from); |
| continue; |
| } |
| |
| /* RIPv1 does not have nexthop value. */ |
| if (packet->version == RIPv1 && rte->nexthop.s_addr != 0) |
| { |
| zlog_info ("RIPv1 packet with nexthop value %s", |
| inet_ntoa (rte->nexthop)); |
| rip_peer_bad_route (from); |
| continue; |
| } |
| |
| /* That is, if the provided information is ignored, a possibly |
| sub-optimal, but absolutely valid, route may be taken. If |
| the received Next Hop is not directly reachable, it should be |
| treated as 0.0.0.0. */ |
| if (packet->version == RIPv2 && rte->nexthop.s_addr != 0) |
| { |
| u_int32_t addrval; |
| |
| /* Multicast address check. */ |
| addrval = ntohl (rte->nexthop.s_addr); |
| if (IN_CLASSD (addrval)) |
| { |
| zlog_info ("Nexthop %s is multicast address, skip this rte", |
| inet_ntoa (rte->nexthop)); |
| continue; |
| } |
| |
| if (! if_lookup_address (rte->nexthop)) |
| { |
| struct route_node *rn; |
| struct rip_info *rinfo; |
| |
| rn = route_node_match_ipv4 (rip->table, &rte->nexthop); |
| |
| if (rn) |
| { |
| rinfo = rn->info; |
| |
| if (rinfo->type == ZEBRA_ROUTE_RIP |
| && rinfo->sub_type == RIP_ROUTE_RTE) |
| { |
| if (IS_RIP_DEBUG_EVENT) |
| zlog_debug ("Next hop %s is on RIP network. Set nexthop to the packet's originator", inet_ntoa (rte->nexthop)); |
| rte->nexthop = rinfo->from; |
| } |
| else |
| { |
| if (IS_RIP_DEBUG_EVENT) |
| zlog_debug ("Next hop %s is not directly reachable. Treat it as 0.0.0.0", inet_ntoa (rte->nexthop)); |
| rte->nexthop.s_addr = 0; |
| } |
| |
| route_unlock_node (rn); |
| } |
| else |
| { |
| if (IS_RIP_DEBUG_EVENT) |
| zlog_debug ("Next hop %s is not directly reachable. Treat it as 0.0.0.0", inet_ntoa (rte->nexthop)); |
| rte->nexthop.s_addr = 0; |
| } |
| |
| } |
| } |
| |
| /* For RIPv1, there won't be a valid netmask. |
| |
| This is a best guess at the masks. If everyone was using old |
| Ciscos before the 'ip subnet zero' option, it would be almost |
| right too :-) |
| |
| Cisco summarize ripv1 advertisments to the classful boundary |
| (/16 for class B's) except when the RIP packet does to inside |
| the classful network in question. */ |
| |
| if ((packet->version == RIPv1 && rte->prefix.s_addr != 0) |
| || (packet->version == RIPv2 |
| && (rte->prefix.s_addr != 0 && rte->mask.s_addr == 0))) |
| { |
| u_int32_t destination; |
| |
| if (subnetted == -1) |
| { |
| memcpy (&ifaddr, ifc->address, sizeof (struct prefix_ipv4)); |
| memcpy (&ifaddrclass, &ifaddr, sizeof (struct prefix_ipv4)); |
| apply_classful_mask_ipv4 (&ifaddrclass); |
| subnetted = 0; |
| if (ifaddr.prefixlen > ifaddrclass.prefixlen) |
| subnetted = 1; |
| } |
| |
| destination = ntohl (rte->prefix.s_addr); |
| |
| if (IN_CLASSA (destination)) |
| masklen2ip (8, &rte->mask); |
| else if (IN_CLASSB (destination)) |
| masklen2ip (16, &rte->mask); |
| else if (IN_CLASSC (destination)) |
| masklen2ip (24, &rte->mask); |
| |
| if (subnetted == 1) |
| masklen2ip (ifaddrclass.prefixlen, |
| (struct in_addr *) &destination); |
| if ((subnetted == 1) && ((rte->prefix.s_addr & destination) == |
| ifaddrclass.prefix.s_addr)) |
| { |
| masklen2ip (ifaddr.prefixlen, &rte->mask); |
| if ((rte->prefix.s_addr & rte->mask.s_addr) != rte->prefix.s_addr) |
| masklen2ip (32, &rte->mask); |
| if (IS_RIP_DEBUG_EVENT) |
| zlog_debug ("Subnetted route %s", inet_ntoa (rte->prefix)); |
| } |
| else |
| { |
| if ((rte->prefix.s_addr & rte->mask.s_addr) != rte->prefix.s_addr) |
| continue; |
| } |
| |
| if (IS_RIP_DEBUG_EVENT) |
| { |
| zlog_debug ("Resultant route %s", inet_ntoa (rte->prefix)); |
| zlog_debug ("Resultant mask %s", inet_ntoa (rte->mask)); |
| } |
| } |
| |
| /* In case of RIPv2, if prefix in RTE is not netmask applied one |
| ignore the entry. */ |
| if ((packet->version == RIPv2) |
| && (rte->mask.s_addr != 0) |
| && ((rte->prefix.s_addr & rte->mask.s_addr) != rte->prefix.s_addr)) |
| { |
| zlog_warn ("RIPv2 address %s is not mask /%d applied one", |
| inet_ntoa (rte->prefix), ip_masklen (rte->mask)); |
| rip_peer_bad_route (from); |
| continue; |
| } |
| |
| /* Default route's netmask is ignored. */ |
| if (packet->version == RIPv2 |
| && (rte->prefix.s_addr == 0) |
| && (rte->mask.s_addr != 0)) |
| { |
| if (IS_RIP_DEBUG_EVENT) |
| zlog_debug ("Default route with non-zero netmask. Set zero to netmask"); |
| rte->mask.s_addr = 0; |
| } |
| |
| /* Routing table updates. */ |
| rip_rte_process (rte, from, ifc->ifp); |
| } |
| } |
| |
| /* Make socket for RIP protocol. */ |
| static int |
| rip_create_socket (struct sockaddr_in *from) |
| { |
| int ret; |
| int sock; |
| struct sockaddr_in addr; |
| |
| memset (&addr, 0, sizeof (struct sockaddr_in)); |
| |
| if (!from) |
| { |
| addr.sin_family = AF_INET; |
| addr.sin_addr.s_addr = INADDR_ANY; |
| #ifdef HAVE_STRUCT_SOCKADDR_IN_SIN_LEN |
| addr.sin_len = sizeof (struct sockaddr_in); |
| #endif /* HAVE_STRUCT_SOCKADDR_IN_SIN_LEN */ |
| } else { |
| memcpy(&addr, from, sizeof(addr)); |
| } |
| |
| /* sending port must always be the RIP port */ |
| addr.sin_port = htons (RIP_PORT_DEFAULT); |
| |
| /* Make datagram socket. */ |
| sock = socket (AF_INET, SOCK_DGRAM, 0); |
| if (sock < 0) |
| { |
| zlog_err("Cannot create UDP socket: %s", safe_strerror(errno)); |
| exit (1); |
| } |
| |
| sockopt_broadcast (sock); |
| sockopt_reuseaddr (sock); |
| sockopt_reuseport (sock); |
| #ifdef RIP_RECVMSG |
| setsockopt_pktinfo (sock); |
| #endif /* RIP_RECVMSG */ |
| #ifdef IPTOS_PREC_INTERNETCONTROL |
| setsockopt_ipv4_tos (sock, IPTOS_PREC_INTERNETCONTROL); |
| #endif |
| |
| if (ripd_privs.change (ZPRIVS_RAISE)) |
| zlog_err ("rip_create_socket: could not raise privs"); |
| setsockopt_so_recvbuf (sock, RIP_UDP_RCV_BUF); |
| if ( (ret = bind (sock, (struct sockaddr *) & addr, sizeof (addr))) < 0) |
| |
| { |
| int save_errno = errno; |
| if (ripd_privs.change (ZPRIVS_LOWER)) |
| zlog_err ("rip_create_socket: could not lower privs"); |
| |
| zlog_err("%s: Can't bind socket %d to %s port %d: %s", __func__, |
| sock, inet_ntoa(addr.sin_addr), |
| (int) ntohs(addr.sin_port), |
| safe_strerror(save_errno)); |
| |
| close (sock); |
| return ret; |
| } |
| |
| if (ripd_privs.change (ZPRIVS_LOWER)) |
| zlog_err ("rip_create_socket: could not lower privs"); |
| |
| return sock; |
| } |
| |
| /* RIP packet send to destination address, on interface denoted by |
| * by connected argument. NULL to argument denotes destination should be |
| * should be RIP multicast group |
| */ |
| static int |
| rip_send_packet (u_char * buf, int size, struct sockaddr_in *to, |
| struct connected *ifc) |
| { |
| int ret, send_sock; |
| struct sockaddr_in sin; |
| |
| assert (ifc != NULL); |
| |
| if (IS_RIP_DEBUG_PACKET) |
| { |
| #define ADDRESS_SIZE 20 |
| char dst[ADDRESS_SIZE]; |
| dst[ADDRESS_SIZE - 1] = '\0'; |
| |
| if (to) |
| { |
| strncpy (dst, inet_ntoa(to->sin_addr), ADDRESS_SIZE - 1); |
| } |
| else |
| { |
| sin.sin_addr.s_addr = htonl (INADDR_RIP_GROUP); |
| strncpy (dst, inet_ntoa(sin.sin_addr), ADDRESS_SIZE - 1); |
| } |
| #undef ADDRESS_SIZE |
| zlog_debug("rip_send_packet %s > %s (%s)", |
| inet_ntoa(ifc->address->u.prefix4), |
| dst, ifc->ifp->name); |
| } |
| |
| if ( CHECK_FLAG (ifc->flags, ZEBRA_IFA_SECONDARY) ) |
| { |
| /* |
| * ZEBRA_IFA_SECONDARY is set on linux when an interface is configured |
| * with multiple addresses on the same subnet: the first address |
| * on the subnet is configured "primary", and all subsequent addresses |
| * on that subnet are treated as "secondary" addresses. |
| * In order to avoid routing-table bloat on other rip listeners, |
| * we do not send out RIP packets with ZEBRA_IFA_SECONDARY source addrs. |
| * XXX Since Linux is the only system for which the ZEBRA_IFA_SECONDARY |
| * flag is set, we would end up sending a packet for a "secondary" |
| * source address on non-linux systems. |
| */ |
| if (IS_RIP_DEBUG_PACKET) |
| zlog_debug("duplicate dropped"); |
| return 0; |
| } |
| |
| /* Make destination address. */ |
| memset (&sin, 0, sizeof (struct sockaddr_in)); |
| sin.sin_family = AF_INET; |
| #ifdef HAVE_STRUCT_SOCKADDR_IN_SIN_LEN |
| sin.sin_len = sizeof (struct sockaddr_in); |
| #endif /* HAVE_STRUCT_SOCKADDR_IN_SIN_LEN */ |
| |
| /* When destination is specified, use it's port and address. */ |
| if (to) |
| { |
| sin.sin_port = to->sin_port; |
| sin.sin_addr = to->sin_addr; |
| send_sock = rip->sock; |
| } |
| else |
| { |
| struct sockaddr_in from; |
| |
| sin.sin_port = htons (RIP_PORT_DEFAULT); |
| sin.sin_addr.s_addr = htonl (INADDR_RIP_GROUP); |
| |
| /* multicast send should bind to local interface address */ |
| memset (&from, 0, sizeof (from)); |
| from.sin_family = AF_INET; |
| from.sin_port = htons (RIP_PORT_DEFAULT); |
| from.sin_addr = ifc->address->u.prefix4; |
| #ifdef HAVE_STRUCT_SOCKADDR_IN_SIN_LEN |
| from.sin_len = sizeof (struct sockaddr_in); |
| #endif /* HAVE_STRUCT_SOCKADDR_IN_SIN_LEN */ |
| |
| /* |
| * we have to open a new socket for each packet because this |
| * is the most portable way to bind to a different source |
| * ipv4 address for each packet. |
| */ |
| if ( (send_sock = rip_create_socket (&from)) < 0) |
| { |
| zlog_warn("rip_send_packet could not create socket."); |
| return -1; |
| } |
| rip_interface_multicast_set (send_sock, ifc); |
| } |
| |
| ret = sendto (send_sock, buf, size, 0, (struct sockaddr *)&sin, |
| sizeof (struct sockaddr_in)); |
| |
| if (IS_RIP_DEBUG_EVENT) |
| zlog_debug ("SEND to %s.%d", inet_ntoa(sin.sin_addr), |
| ntohs (sin.sin_port)); |
| |
| if (ret < 0) |
| zlog_warn ("can't send packet : %s", safe_strerror (errno)); |
| |
| if (!to) |
| close(send_sock); |
| |
| return ret; |
| } |
| |
| /* Add redistributed route to RIP table. */ |
| void |
| rip_redistribute_add (int type, int sub_type, struct prefix_ipv4 *p, |
| unsigned int ifindex, struct in_addr *nexthop, |
| unsigned int metric, unsigned char distance) |
| { |
| int ret; |
| struct route_node *rp = NULL; |
| struct rip_info *rinfo = NULL, newinfo; |
| struct list *list = NULL; |
| |
| /* Redistribute route */ |
| ret = rip_destination_check (p->prefix); |
| if (! ret) |
| return; |
| |
| rp = route_node_get (rip->table, (struct prefix *) p); |
| |
| memset (&newinfo, 0, sizeof (struct rip_info)); |
| newinfo.type = type; |
| newinfo.sub_type = sub_type; |
| newinfo.ifindex = ifindex; |
| newinfo.metric = 1; |
| newinfo.external_metric = metric; |
| newinfo.distance = distance; |
| newinfo.rp = rp; |
| if (nexthop) |
| newinfo.nexthop = *nexthop; |
| |
| if ((list = rp->info) != NULL && listcount (list) != 0) |
| { |
| rinfo = listgetdata (listhead (list)); |
| |
| if (rinfo->type == ZEBRA_ROUTE_CONNECT |
| && rinfo->sub_type == RIP_ROUTE_INTERFACE |
| && rinfo->metric != RIP_METRIC_INFINITY) |
| { |
| route_unlock_node (rp); |
| return; |
| } |
| |
| /* Manually configured RIP route check. */ |
| if (rinfo->type == ZEBRA_ROUTE_RIP |
| && ((rinfo->sub_type == RIP_ROUTE_STATIC) || |
| (rinfo->sub_type == RIP_ROUTE_DEFAULT)) ) |
| { |
| if (type != ZEBRA_ROUTE_RIP || ((sub_type != RIP_ROUTE_STATIC) && |
| (sub_type != RIP_ROUTE_DEFAULT))) |
| { |
| route_unlock_node (rp); |
| return; |
| } |
| } |
| |
| rinfo = rip_ecmp_replace (&newinfo); |
| route_unlock_node (rp); |
| } |
| else |
| rinfo = rip_ecmp_add (&newinfo); |
| |
| if (IS_RIP_DEBUG_EVENT) { |
| if (!nexthop) |
| zlog_debug ("Redistribute new prefix %s/%d on the interface %s", |
| inet_ntoa(p->prefix), p->prefixlen, |
| ifindex2ifname(ifindex)); |
| else |
| zlog_debug ("Redistribute new prefix %s/%d with nexthop %s on the interface %s", |
| inet_ntoa(p->prefix), p->prefixlen, inet_ntoa(rinfo->nexthop), |
| ifindex2ifname(ifindex)); |
| } |
| |
| rip_event (RIP_TRIGGERED_UPDATE, 0); |
| } |
| |
| /* Delete redistributed route from RIP table. */ |
| void |
| rip_redistribute_delete (int type, int sub_type, struct prefix_ipv4 *p, |
| unsigned int ifindex) |
| { |
| int ret; |
| struct route_node *rp; |
| struct rip_info *rinfo; |
| |
| ret = rip_destination_check (p->prefix); |
| if (! ret) |
| return; |
| |
| rp = route_node_lookup (rip->table, (struct prefix *) p); |
| if (rp) |
| { |
| struct list *list = rp->info; |
| |
| if (list != NULL && listcount (list) != 0) |
| { |
| rinfo = listgetdata (listhead (list)); |
| if (rinfo != NULL |
| && rinfo->type == type |
| && rinfo->sub_type == sub_type |
| && rinfo->ifindex == ifindex) |
| { |
| /* Perform poisoned reverse. */ |
| rinfo->metric = RIP_METRIC_INFINITY; |
| RIP_TIMER_ON (rinfo->t_garbage_collect, |
| rip_garbage_collect, rip->garbage_time); |
| RIP_TIMER_OFF (rinfo->t_timeout); |
| rinfo->flags |= RIP_RTF_CHANGED; |
| |
| if (IS_RIP_DEBUG_EVENT) |
| zlog_debug ("Poisone %s/%d on the interface %s with an " |
| "infinity metric [delete]", |
| inet_ntoa(p->prefix), p->prefixlen, |
| ifindex2ifname(ifindex)); |
| |
| rip_event (RIP_TRIGGERED_UPDATE, 0); |
| } |
| } |
| route_unlock_node (rp); |
| } |
| } |
| |
| /* Response to request called from rip_read ().*/ |
| static void |
| rip_request_process (struct rip_packet *packet, int size, |
| struct sockaddr_in *from, struct connected *ifc) |
| { |
| caddr_t lim; |
| struct rte *rte; |
| struct prefix_ipv4 p; |
| struct route_node *rp; |
| struct rip_info *rinfo; |
| struct rip_interface *ri; |
| |
| /* Does not reponse to the requests on the loopback interfaces */ |
| if (if_is_loopback (ifc->ifp)) |
| return; |
| |
| /* Check RIP process is enabled on this interface. */ |
| ri = ifc->ifp->info; |
| if (! ri->running) |
| return; |
| |
| /* When passive interface is specified, suppress responses */ |
| if (ri->passive) |
| return; |
| |
| /* RIP peer update. */ |
| rip_peer_update (from, packet->version); |
| |
| lim = ((caddr_t) packet) + size; |
| rte = packet->rte; |
| |
| /* The Request is processed entry by entry. If there are no |
| entries, no response is given. */ |
| if (lim == (caddr_t) rte) |
| return; |
| |
| /* There is one special case. If there is exactly one entry in the |
| request, and it has an address family identifier of zero and a |
| metric of infinity (i.e., 16), then this is a request to send the |
| entire routing table. */ |
| if (lim == ((caddr_t) (rte + 1)) && |
| ntohs (rte->family) == 0 && |
| ntohl (rte->metric) == RIP_METRIC_INFINITY) |
| { |
| /* All route with split horizon */ |
| rip_output_process (ifc, from, rip_all_route, packet->version); |
| } |
| else |
| { |
| /* Examine the list of RTEs in the Request one by one. For each |
| entry, look up the destination in the router's routing |
| database and, if there is a route, put that route's metric in |
| the metric field of the RTE. If there is no explicit route |
| to the specified destination, put infinity in the metric |
| field. Once all the entries have been filled in, change the |
| command from Request to Response and send the datagram back |
| to the requestor. */ |
| p.family = AF_INET; |
| |
| for (; ((caddr_t) rte) < lim; rte++) |
| { |
| p.prefix = rte->prefix; |
| p.prefixlen = ip_masklen (rte->mask); |
| apply_mask_ipv4 (&p); |
| |
| rp = route_node_lookup (rip->table, (struct prefix *) &p); |
| if (rp) |
| { |
| rinfo = listgetdata (listhead ((struct list *)rp->info)); |
| rte->metric = htonl (rinfo->metric); |
| route_unlock_node (rp); |
| } |
| else |
| rte->metric = htonl (RIP_METRIC_INFINITY); |
| } |
| packet->command = RIP_RESPONSE; |
| |
| rip_send_packet ((u_char *)packet, size, from, ifc); |
| } |
| rip_global_queries++; |
| } |
| |
| #if RIP_RECVMSG |
| /* Set IPv6 packet info to the socket. */ |
| static int |
| setsockopt_pktinfo (int sock) |
| { |
| int ret; |
| int val = 1; |
| |
| ret = setsockopt(sock, IPPROTO_IP, IP_PKTINFO, &val, sizeof(val)); |
| if (ret < 0) |
| zlog_warn ("Can't setsockopt IP_PKTINFO : %s", safe_strerror (errno)); |
| return ret; |
| } |
| |
| /* Read RIP packet by recvmsg function. */ |
| int |
| rip_recvmsg (int sock, u_char *buf, int size, struct sockaddr_in *from, |
| int *ifindex) |
| { |
| int ret; |
| struct msghdr msg; |
| struct iovec iov; |
| struct cmsghdr *ptr; |
| char adata[1024]; |
| |
| msg.msg_name = (void *) from; |
| msg.msg_namelen = sizeof (struct sockaddr_in); |
| msg.msg_iov = &iov; |
| msg.msg_iovlen = 1; |
| msg.msg_control = (void *) adata; |
| msg.msg_controllen = sizeof adata; |
| iov.iov_base = buf; |
| iov.iov_len = size; |
| |
| ret = recvmsg (sock, &msg, 0); |
| if (ret < 0) |
| return ret; |
| |
| for (ptr = ZCMSG_FIRSTHDR(&msg); ptr != NULL; ptr = CMSG_NXTHDR(&msg, ptr)) |
| if (ptr->cmsg_level == IPPROTO_IP && ptr->cmsg_type == IP_PKTINFO) |
| { |
| struct in_pktinfo *pktinfo; |
| int i; |
| |
| pktinfo = (struct in_pktinfo *) CMSG_DATA (ptr); |
| i = pktinfo->ipi_ifindex; |
| } |
| return ret; |
| } |
| |
| /* RIP packet read function. */ |
| int |
| rip_read_new (struct thread *t) |
| { |
| int ret; |
| int sock; |
| char buf[RIP_PACKET_MAXSIZ]; |
| struct sockaddr_in from; |
| unsigned int ifindex; |
| |
| /* Fetch socket then register myself. */ |
| sock = THREAD_FD (t); |
| rip_event (RIP_READ, sock); |
| |
| /* Read RIP packet. */ |
| ret = rip_recvmsg (sock, buf, RIP_PACKET_MAXSIZ, &from, (int *)&ifindex); |
| if (ret < 0) |
| { |
| zlog_warn ("Can't read RIP packet: %s", safe_strerror (errno)); |
| return ret; |
| } |
| |
| return ret; |
| } |
| #endif /* RIP_RECVMSG */ |
| |
| /* First entry point of RIP packet. */ |
| static int |
| rip_read (struct thread *t) |
| { |
| int sock; |
| int ret; |
| int rtenum; |
| union rip_buf rip_buf; |
| struct rip_packet *packet; |
| struct sockaddr_in from; |
| int len; |
| int vrecv; |
| socklen_t fromlen; |
| struct interface *ifp; |
| struct connected *ifc; |
| struct rip_interface *ri; |
| |
| /* Fetch socket then register myself. */ |
| sock = THREAD_FD (t); |
| rip->t_read = NULL; |
| |
| /* Add myself to tne next event */ |
| rip_event (RIP_READ, sock); |
| |
| /* RIPd manages only IPv4. */ |
| memset (&from, 0, sizeof (struct sockaddr_in)); |
| fromlen = sizeof (struct sockaddr_in); |
| |
| len = recvfrom (sock, (char *)&rip_buf.buf, sizeof (rip_buf.buf), 0, |
| (struct sockaddr *) &from, &fromlen); |
| if (len < 0) |
| { |
| zlog_info ("recvfrom failed: %s", safe_strerror (errno)); |
| return len; |
| } |
| |
| /* Check is this packet comming from myself? */ |
| if (if_check_address (from.sin_addr)) |
| { |
| if (IS_RIP_DEBUG_PACKET) |
| zlog_debug ("ignore packet comes from myself"); |
| return -1; |
| } |
| |
| /* Which interface is this packet comes from. */ |
| ifp = if_lookup_address (from.sin_addr); |
| |
| /* RIP packet received */ |
| if (IS_RIP_DEBUG_EVENT) |
| zlog_debug ("RECV packet from %s port %d on %s", |
| inet_ntoa (from.sin_addr), ntohs (from.sin_port), |
| ifp ? ifp->name : "unknown"); |
| |
| /* If this packet come from unknown interface, ignore it. */ |
| if (ifp == NULL) |
| { |
| zlog_info ("rip_read: cannot find interface for packet from %s port %d", |
| inet_ntoa(from.sin_addr), ntohs (from.sin_port)); |
| return -1; |
| } |
| |
| ifc = connected_lookup_address (ifp, from.sin_addr); |
| |
| if (ifc == NULL) |
| { |
| zlog_info ("rip_read: cannot find connected address for packet from %s " |
| "port %d on interface %s", |
| inet_ntoa(from.sin_addr), ntohs (from.sin_port), ifp->name); |
| return -1; |
| } |
| |
| /* Packet length check. */ |
| if (len < RIP_PACKET_MINSIZ) |
| { |
| zlog_warn ("packet size %d is smaller than minimum size %d", |
| len, RIP_PACKET_MINSIZ); |
| rip_peer_bad_packet (&from); |
| return len; |
| } |
| if (len > RIP_PACKET_MAXSIZ) |
| { |
| zlog_warn ("packet size %d is larger than max size %d", |
| len, RIP_PACKET_MAXSIZ); |
| rip_peer_bad_packet (&from); |
| return len; |
| } |
| |
| /* Packet alignment check. */ |
| if ((len - RIP_PACKET_MINSIZ) % 20) |
| { |
| zlog_warn ("packet size %d is wrong for RIP packet alignment", len); |
| rip_peer_bad_packet (&from); |
| return len; |
| } |
| |
| /* Set RTE number. */ |
| rtenum = ((len - RIP_PACKET_MINSIZ) / 20); |
| |
| /* For easy to handle. */ |
| packet = &rip_buf.rip_packet; |
| |
| /* RIP version check. */ |
| if (packet->version == 0) |
| { |
| zlog_info ("version 0 with command %d received.", packet->command); |
| rip_peer_bad_packet (&from); |
| return -1; |
| } |
| |
| /* Dump RIP packet. */ |
| if (IS_RIP_DEBUG_RECV) |
| rip_packet_dump (packet, len, "RECV"); |
| |
| /* RIP version adjust. This code should rethink now. RFC1058 says |
| that "Version 1 implementations are to ignore this extra data and |
| process only the fields specified in this document.". So RIPv3 |
| packet should be treated as RIPv1 ignoring must be zero field. */ |
| if (packet->version > RIPv2) |
| packet->version = RIPv2; |
| |
| /* Is RIP running or is this RIP neighbor ?*/ |
| ri = ifp->info; |
| if (! ri->running && ! rip_neighbor_lookup (&from)) |
| { |
| if (IS_RIP_DEBUG_EVENT) |
| zlog_debug ("RIP is not enabled on interface %s.", ifp->name); |
| rip_peer_bad_packet (&from); |
| return -1; |
| } |
| |
| /* RIP Version check. RFC2453, 4.6 and 5.1 */ |
| vrecv = ((ri->ri_receive == RI_RIP_UNSPEC) ? |
| rip->version_recv : ri->ri_receive); |
| if ((packet->version == RIPv1) && !(vrecv & RIPv1)) |
| { |
| if (IS_RIP_DEBUG_PACKET) |
| zlog_debug (" packet's v%d doesn't fit to if version spec", |
| packet->version); |
| rip_peer_bad_packet (&from); |
| return -1; |
| } |
| if ((packet->version == RIPv2) && !(vrecv & RIPv2)) |
| { |
| if (IS_RIP_DEBUG_PACKET) |
| zlog_debug (" packet's v%d doesn't fit to if version spec", |
| packet->version); |
| rip_peer_bad_packet (&from); |
| return -1; |
| } |
| |
| /* RFC2453 5.2 If the router is not configured to authenticate RIP-2 |
| messages, then RIP-1 and unauthenticated RIP-2 messages will be |
| accepted; authenticated RIP-2 messages shall be discarded. */ |
| if ((ri->auth_type == RIP_NO_AUTH) |
| && rtenum |
| && (packet->version == RIPv2) |
| && (packet->rte->family == htons(RIP_FAMILY_AUTH))) |
| { |
| if (IS_RIP_DEBUG_EVENT) |
| zlog_debug ("packet RIPv%d is dropped because authentication disabled", |
| packet->version); |
| rip_peer_bad_packet (&from); |
| return -1; |
| } |
| |
| /* RFC: |
| If the router is configured to authenticate RIP-2 messages, then |
| RIP-1 messages and RIP-2 messages which pass authentication |
| testing shall be accepted; unauthenticated and failed |
| authentication RIP-2 messages shall be discarded. For maximum |
| security, RIP-1 messages should be ignored when authentication is |
| in use (see section 4.1); otherwise, the routing information from |
| authenticated messages will be propagated by RIP-1 routers in an |
| unauthenticated manner. |
| */ |
| /* We make an exception for RIPv1 REQUEST packets, to which we'll |
| * always reply regardless of authentication settings, because: |
| * |
| * - if there other authorised routers on-link, the REQUESTor can |
| * passively obtain the routing updates anyway |
| * - if there are no other authorised routers on-link, RIP can |
| * easily be disabled for the link to prevent giving out information |
| * on state of this routers RIP routing table.. |
| * |
| * I.e. if RIPv1 has any place anymore these days, it's as a very |
| * simple way to distribute routing information (e.g. to embedded |
| * hosts / appliances) and the ability to give out RIPv1 |
| * routing-information freely, while still requiring RIPv2 |
| * authentication for any RESPONSEs might be vaguely useful. |
| */ |
| if (ri->auth_type != RIP_NO_AUTH |
| && packet->version == RIPv1) |
| { |
| /* Discard RIPv1 messages other than REQUESTs */ |
| if (packet->command != RIP_REQUEST) |
| { |
| if (IS_RIP_DEBUG_PACKET) |
| zlog_debug ("RIPv1" " dropped because authentication enabled"); |
| rip_peer_bad_packet (&from); |
| return -1; |
| } |
| } |
| else if (ri->auth_type != RIP_NO_AUTH) |
| { |
| const char *auth_desc; |
| |
| if (rtenum == 0) |
| { |
| /* There definitely is no authentication in the packet. */ |
| if (IS_RIP_DEBUG_PACKET) |
| zlog_debug ("RIPv2 authentication failed: no auth RTE in packet"); |
| rip_peer_bad_packet (&from); |
| return -1; |
| } |
| |
| /* First RTE must be an Authentication Family RTE */ |
| if (packet->rte->family != htons(RIP_FAMILY_AUTH)) |
| { |
| if (IS_RIP_DEBUG_PACKET) |
| zlog_debug ("RIPv2" " dropped because authentication enabled"); |
| rip_peer_bad_packet (&from); |
| return -1; |
| } |
| |
| /* Check RIPv2 authentication. */ |
| switch (ntohs(packet->rte->tag)) |
| { |
| case RIP_AUTH_SIMPLE_PASSWORD: |
| auth_desc = "simple"; |
| ret = rip_auth_simple_password (packet->rte, &from, ifp); |
| break; |
| |
| case RIP_AUTH_MD5: |
| auth_desc = "MD5"; |
| ret = rip_auth_md5 (packet, &from, len, ifp); |
| /* Reset RIP packet length to trim MD5 data. */ |
| len = ret; |
| break; |
| |
| default: |
| ret = 0; |
| auth_desc = "unknown type"; |
| if (IS_RIP_DEBUG_PACKET) |
| zlog_debug ("RIPv2 Unknown authentication type %d", |
| ntohs (packet->rte->tag)); |
| } |
| |
| if (ret) |
| { |
| if (IS_RIP_DEBUG_PACKET) |
| zlog_debug ("RIPv2 %s authentication success", auth_desc); |
| } |
| else |
| { |
| if (IS_RIP_DEBUG_PACKET) |
| zlog_debug ("RIPv2 %s authentication failure", auth_desc); |
| rip_peer_bad_packet (&from); |
| return -1; |
| } |
| } |
| |
| /* Process each command. */ |
| switch (packet->command) |
| { |
| case RIP_RESPONSE: |
| rip_response_process (packet, len, &from, ifc); |
| break; |
| case RIP_REQUEST: |
| case RIP_POLL: |
| rip_request_process (packet, len, &from, ifc); |
| break; |
| case RIP_TRACEON: |
| case RIP_TRACEOFF: |
| zlog_info ("Obsolete command %s received, please sent it to routed", |
| lookup (rip_msg, packet->command)); |
| rip_peer_bad_packet (&from); |
| break; |
| case RIP_POLL_ENTRY: |
| zlog_info ("Obsolete command %s received", |
| lookup (rip_msg, packet->command)); |
| rip_peer_bad_packet (&from); |
| break; |
| default: |
| zlog_info ("Unknown RIP command %d received", packet->command); |
| rip_peer_bad_packet (&from); |
| break; |
| } |
| |
| return len; |
| } |
| |
| /* Write routing table entry to the stream and return next index of |
| the routing table entry in the stream. */ |
| static int |
| rip_write_rte (int num, struct stream *s, struct prefix_ipv4 *p, |
| u_char version, struct rip_info *rinfo) |
| { |
| struct in_addr mask; |
| |
| /* Write routing table entry. */ |
| if (version == RIPv1) |
| { |
| stream_putw (s, AF_INET); |
| stream_putw (s, 0); |
| stream_put_ipv4 (s, p->prefix.s_addr); |
| stream_put_ipv4 (s, 0); |
| stream_put_ipv4 (s, 0); |
| stream_putl (s, rinfo->metric_out); |
| } |
| else |
| { |
| masklen2ip (p->prefixlen, &mask); |
| |
| stream_putw (s, AF_INET); |
| stream_putw (s, rinfo->tag_out); |
| stream_put_ipv4 (s, p->prefix.s_addr); |
| stream_put_ipv4 (s, mask.s_addr); |
| stream_put_ipv4 (s, rinfo->nexthop_out.s_addr); |
| stream_putl (s, rinfo->metric_out); |
| } |
| |
| return ++num; |
| } |
| |
| /* Send update to the ifp or spcified neighbor. */ |
| void |
| rip_output_process (struct connected *ifc, struct sockaddr_in *to, |
| int route_type, u_char version) |
| { |
| int ret; |
| struct stream *s; |
| struct route_node *rp; |
| struct rip_info *rinfo; |
| struct rip_interface *ri; |
| struct prefix_ipv4 *p; |
| struct prefix_ipv4 classfull; |
| struct prefix_ipv4 ifaddrclass; |
| struct key *key = NULL; |
| /* this might need to made dynamic if RIP ever supported auth methods |
| with larger key string sizes */ |
| char auth_str[RIP_AUTH_SIMPLE_SIZE]; |
| size_t doff = 0; /* offset of digest offset field */ |
| int num = 0; |
| int rtemax; |
| int subnetted = 0; |
| struct list *list = NULL; |
| struct listnode *listnode = NULL; |
| |
| /* Logging output event. */ |
| if (IS_RIP_DEBUG_EVENT) |
| { |
| if (to) |
| zlog_debug ("update routes to neighbor %s", inet_ntoa (to->sin_addr)); |
| else |
| zlog_debug ("update routes on interface %s ifindex %d", |
| ifc->ifp->name, ifc->ifp->ifindex); |
| } |
| |
| /* Set output stream. */ |
| s = rip->obuf; |
| |
| /* Reset stream and RTE counter. */ |
| stream_reset (s); |
| rtemax = RIP_MAX_RTE; |
| |
| /* Get RIP interface. */ |
| ri = ifc->ifp->info; |
| |
| /* If output interface is in simple password authentication mode, we |
| need space for authentication data. */ |
| if (ri->auth_type == RIP_AUTH_SIMPLE_PASSWORD) |
| rtemax -= 1; |
| |
| /* If output interface is in MD5 authentication mode, we need space |
| for authentication header and data. */ |
| if (ri->auth_type == RIP_AUTH_MD5) |
| rtemax -= 2; |
| |
| /* If output interface is in simple password authentication mode |
| and string or keychain is specified we need space for auth. data */ |
| if (ri->auth_type != RIP_NO_AUTH) |
| { |
| if (ri->key_chain) |
| { |
| struct keychain *keychain; |
| |
| keychain = keychain_lookup (ri->key_chain); |
| if (keychain) |
| key = key_lookup_for_send (keychain); |
| } |
| /* to be passed to auth functions later */ |
| rip_auth_prepare_str_send (ri, key, auth_str, RIP_AUTH_SIMPLE_SIZE); |
| } |
| |
| if (version == RIPv1) |
| { |
| memcpy (&ifaddrclass, ifc->address, sizeof (struct prefix_ipv4)); |
| apply_classful_mask_ipv4 (&ifaddrclass); |
| subnetted = 0; |
| if (ifc->address->prefixlen > ifaddrclass.prefixlen) |
| subnetted = 1; |
| } |
| |
| for (rp = route_top (rip->table); rp; rp = route_next (rp)) |
| if ((list = rp->info) != NULL && listcount (list) != 0) |
| { |
| rinfo = listgetdata (listhead (list)); |
| /* For RIPv1, if we are subnetted, output subnets in our network */ |
| /* that have the same mask as the output "interface". For other */ |
| /* networks, only the classfull version is output. */ |
| |
| if (version == RIPv1) |
| { |
| p = (struct prefix_ipv4 *) &rp->p; |
| |
| if (IS_RIP_DEBUG_PACKET) |
| zlog_debug("RIPv1 mask check, %s/%d considered for output", |
| inet_ntoa (rp->p.u.prefix4), rp->p.prefixlen); |
| |
| if (subnetted && |
| prefix_match ((struct prefix *) &ifaddrclass, &rp->p)) |
| { |
| if ((ifc->address->prefixlen != rp->p.prefixlen) && |
| (rp->p.prefixlen != 32)) |
| continue; |
| } |
| else |
| { |
| memcpy (&classfull, &rp->p, sizeof(struct prefix_ipv4)); |
| apply_classful_mask_ipv4(&classfull); |
| if (rp->p.u.prefix4.s_addr != 0 && |
| classfull.prefixlen != rp->p.prefixlen) |
| continue; |
| } |
| if (IS_RIP_DEBUG_PACKET) |
| zlog_debug("RIPv1 mask check, %s/%d made it through", |
| inet_ntoa (rp->p.u.prefix4), rp->p.prefixlen); |
| } |
| else |
| p = (struct prefix_ipv4 *) &rp->p; |
| |
| /* Apply output filters. */ |
| ret = rip_outgoing_filter (p, ri); |
| if (ret < 0) |
| continue; |
| |
| /* Changed route only output. */ |
| if (route_type == rip_changed_route && |
| (! (rinfo->flags & RIP_RTF_CHANGED))) |
| continue; |
| |
| /* Split horizon. */ |
| /* if (split_horizon == rip_split_horizon) */ |
| if (ri->split_horizon == RIP_SPLIT_HORIZON) |
| { |
| /* |
| * We perform split horizon for RIP and connected route. |
| * For rip routes, we want to suppress the route if we would |
| * end up sending the route back on the interface that we |
| * learned it from, with a higher metric. For connected routes, |
| * we suppress the route if the prefix is a subset of the |
| * source address that we are going to use for the packet |
| * (in order to handle the case when multiple subnets are |
| * configured on the same interface). |
| */ |
| int suppress = 0; |
| struct rip_info *tmp_rinfo = NULL; |
| |
| for (ALL_LIST_ELEMENTS_RO (list, listnode, tmp_rinfo)) |
| if (tmp_rinfo->type == ZEBRA_ROUTE_RIP && |
| tmp_rinfo->ifindex == ifc->ifp->ifindex) |
| { |
| suppress = 1; |
| break; |
| } |
| |
| if (!suppress && rinfo->type == ZEBRA_ROUTE_CONNECT && |
| prefix_match((struct prefix *)p, ifc->address)) |
| suppress = 1; |
| |
| if (suppress) |
| continue; |
| } |
| |
| /* Preparation for route-map. */ |
| rinfo->metric_set = 0; |
| rinfo->nexthop_out.s_addr = 0; |
| rinfo->metric_out = rinfo->metric; |
| rinfo->tag_out = rinfo->tag; |
| rinfo->ifindex_out = ifc->ifp->ifindex; |
| |
| /* In order to avoid some local loops, |
| * if the RIP route has a nexthop via this interface, keep the nexthop, |
| * otherwise set it to 0. The nexthop should not be propagated |
| * beyond the local broadcast/multicast area in order |
| * to avoid an IGP multi-level recursive look-up. |
| * see (4.4) |
| */ |
| if (rinfo->ifindex == ifc->ifp->ifindex) |
| rinfo->nexthop_out = rinfo->nexthop; |
| |
| /* Interface route-map */ |
| if (ri->routemap[RIP_FILTER_OUT]) |
| { |
| ret = route_map_apply (ri->routemap[RIP_FILTER_OUT], |
| (struct prefix *) p, RMAP_RIP, |
| rinfo); |
| |
| if (ret == RMAP_DENYMATCH) |
| { |
| if (IS_RIP_DEBUG_PACKET) |
| zlog_debug ("RIP %s/%d is filtered by route-map out", |
| inet_ntoa (p->prefix), p->prefixlen); |
| continue; |
| } |
| } |
| |
| /* Apply redistribute route map - continue, if deny */ |
| if (rip->route_map[rinfo->type].name |
| && rinfo->sub_type != RIP_ROUTE_INTERFACE) |
| { |
| ret = route_map_apply (rip->route_map[rinfo->type].map, |
| (struct prefix *)p, RMAP_RIP, rinfo); |
| |
| if (ret == RMAP_DENYMATCH) |
| { |
| if (IS_RIP_DEBUG_PACKET) |
| zlog_debug ("%s/%d is filtered by route-map", |
| inet_ntoa (p->prefix), p->prefixlen); |
| continue; |
| } |
| } |
| |
| /* When route-map does not set metric. */ |
| if (! rinfo->metric_set) |
| { |
| /* If redistribute metric is set. */ |
| if (rip->route_map[rinfo->type].metric_config |
| && rinfo->metric != RIP_METRIC_INFINITY) |
| { |
| rinfo->metric_out = rip->route_map[rinfo->type].metric; |
| } |
| else |
| { |
| /* If the route is not connected or localy generated |
| one, use default-metric value*/ |
| if (rinfo->type != ZEBRA_ROUTE_RIP |
| && rinfo->type != ZEBRA_ROUTE_CONNECT |
| && rinfo->metric != RIP_METRIC_INFINITY) |
| rinfo->metric_out = rip->default_metric; |
| } |
| } |
| |
| /* Apply offset-list */ |
| if (rinfo->metric != RIP_METRIC_INFINITY) |
| rip_offset_list_apply_out (p, ifc->ifp, &rinfo->metric_out); |
| |
| if (rinfo->metric_out > RIP_METRIC_INFINITY) |
| rinfo->metric_out = RIP_METRIC_INFINITY; |
| |
| /* Perform split-horizon with poisoned reverse |
| * for RIP and connected routes. |
| **/ |
| if (ri->split_horizon == RIP_SPLIT_HORIZON_POISONED_REVERSE) { |
| /* |
| * We perform split horizon for RIP and connected route. |
| * For rip routes, we want to suppress the route if we would |
| * end up sending the route back on the interface that we |
| * learned it from, with a higher metric. For connected routes, |
| * we suppress the route if the prefix is a subset of the |
| * source address that we are going to use for the packet |
| * (in order to handle the case when multiple subnets are |
| * configured on the same interface). |
| */ |
| struct rip_info *tmp_rinfo = NULL; |
| |
| for (ALL_LIST_ELEMENTS_RO (list, listnode, tmp_rinfo)) |
| if (tmp_rinfo->type == ZEBRA_ROUTE_RIP && |
| tmp_rinfo->ifindex == ifc->ifp->ifindex) |
| rinfo->metric_out = RIP_METRIC_INFINITY; |
| if (tmp_rinfo->type == ZEBRA_ROUTE_CONNECT && |
| prefix_match((struct prefix *)p, ifc->address)) |
| rinfo->metric_out = RIP_METRIC_INFINITY; |
| } |
| |
| /* Prepare preamble, auth headers, if needs be */ |
| if (num == 0) |
| { |
| stream_putc (s, RIP_RESPONSE); |
| stream_putc (s, version); |
| stream_putw (s, 0); |
| |
| /* auth header for !v1 && !no_auth */ |
| if ( (ri->auth_type != RIP_NO_AUTH) && (version != RIPv1) ) |
| doff = rip_auth_header_write (s, ri, key, auth_str, |
| RIP_AUTH_SIMPLE_SIZE); |
| } |
| |
| /* Write RTE to the stream. */ |
| num = rip_write_rte (num, s, p, version, rinfo); |
| if (num == rtemax) |
| { |
| if (version == RIPv2 && ri->auth_type == RIP_AUTH_MD5) |
| rip_auth_md5_set (s, ri, doff, auth_str, RIP_AUTH_SIMPLE_SIZE); |
| |
| ret = rip_send_packet (STREAM_DATA (s), stream_get_endp (s), |
| to, ifc); |
| |
| if (ret >= 0 && IS_RIP_DEBUG_SEND) |
| rip_packet_dump ((struct rip_packet *)STREAM_DATA (s), |
| stream_get_endp(s), "SEND"); |
| num = 0; |
| stream_reset (s); |
| } |
| } |
| |
| /* Flush unwritten RTE. */ |
| if (num != 0) |
| { |
| if (version == RIPv2 && ri->auth_type == RIP_AUTH_MD5) |
| rip_auth_md5_set (s, ri, doff, auth_str, RIP_AUTH_SIMPLE_SIZE); |
| |
| ret = rip_send_packet (STREAM_DATA (s), stream_get_endp (s), to, ifc); |
| |
| if (ret >= 0 && IS_RIP_DEBUG_SEND) |
| rip_packet_dump ((struct rip_packet *)STREAM_DATA (s), |
| stream_get_endp (s), "SEND"); |
| num = 0; |
| stream_reset (s); |
| } |
| |
| /* Statistics updates. */ |
| ri->sent_updates++; |
| } |
| |
| /* Send RIP packet to the interface. */ |
| static void |
| rip_update_interface (struct connected *ifc, u_char version, int route_type) |
| { |
| struct sockaddr_in to; |
| |
| /* When RIP version is 2 and multicast enable interface. */ |
| if (version == RIPv2 && if_is_multicast (ifc->ifp)) |
| { |
| if (IS_RIP_DEBUG_EVENT) |
| zlog_debug ("multicast announce on %s ", ifc->ifp->name); |
| |
| rip_output_process (ifc, NULL, route_type, version); |
| return; |
| } |
| |
| /* If we can't send multicast packet, send it with unicast. */ |
| if (if_is_broadcast (ifc->ifp) || if_is_pointopoint (ifc->ifp)) |
| { |
| if (ifc->address->family == AF_INET) |
| { |
| /* Destination address and port setting. */ |
| memset (&to, 0, sizeof (struct sockaddr_in)); |
| if (ifc->destination) |
| /* use specified broadcast or peer destination addr */ |
| to.sin_addr = ifc->destination->u.prefix4; |
| else if (ifc->address->prefixlen < IPV4_MAX_PREFIXLEN) |
| /* calculate the appropriate broadcast address */ |
| to.sin_addr.s_addr = |
| ipv4_broadcast_addr(ifc->address->u.prefix4.s_addr, |
| ifc->address->prefixlen); |
| else |
| /* do not know where to send the packet */ |
| return; |
| to.sin_port = htons (RIP_PORT_DEFAULT); |
| |
| if (IS_RIP_DEBUG_EVENT) |
| zlog_debug("%s announce to %s on %s", |
| CONNECTED_PEER(ifc) ? "unicast" : "broadcast", |
| inet_ntoa (to.sin_addr), ifc->ifp->name); |
| |
| rip_output_process (ifc, &to, route_type, version); |
| } |
| } |
| } |
| |
| /* Update send to all interface and neighbor. */ |
| static void |
| rip_update_process (int route_type) |
| { |
| struct listnode *node; |
| struct listnode *ifnode, *ifnnode; |
| struct connected *connected; |
| struct interface *ifp; |
| struct rip_interface *ri; |
| struct route_node *rp; |
| struct sockaddr_in to; |
| struct prefix_ipv4 *p; |
| |
| /* Send RIP update to each interface. */ |
| for (ALL_LIST_ELEMENTS_RO (iflist, node, ifp)) |
| { |
| if (if_is_loopback (ifp)) |
| continue; |
| |
| if (! if_is_operative (ifp)) |
| continue; |
| |
| /* Fetch RIP interface information. */ |
| ri = ifp->info; |
| |
| /* When passive interface is specified, suppress announce to the |
| interface. */ |
| if (ri->passive) |
| continue; |
| |
| if (ri->running) |
| { |
| /* |
| * If there is no version configuration in the interface, |
| * use rip's version setting. |
| */ |
| int vsend = ((ri->ri_send == RI_RIP_UNSPEC) ? |
| rip->version_send : ri->ri_send); |
| |
| if (IS_RIP_DEBUG_EVENT) |
| zlog_debug("SEND UPDATE to %s ifindex %d", |
| ifp->name, ifp->ifindex); |
| |
| /* send update on each connected network */ |
| for (ALL_LIST_ELEMENTS (ifp->connected, ifnode, ifnnode, connected)) |
| { |
| if (connected->address->family == AF_INET) |
| { |
| if (vsend & RIPv1) |
| rip_update_interface (connected, RIPv1, route_type); |
| if ((vsend & RIPv2) && if_is_multicast(ifp)) |
| rip_update_interface (connected, RIPv2, route_type); |
| } |
| } |
| } |
| } |
| |
| /* RIP send updates to each neighbor. */ |
| for (rp = route_top (rip->neighbor); rp; rp = route_next (rp)) |
| if (rp->info != NULL) |
| { |
| p = (struct prefix_ipv4 *) &rp->p; |
| |
| ifp = if_lookup_address (p->prefix); |
| if (! ifp) |
| { |
| zlog_warn ("Neighbor %s doesnt have connected interface!", |
| inet_ntoa (p->prefix)); |
| continue; |
| } |
| |
| if ( (connected = connected_lookup_address (ifp, p->prefix)) == NULL) |
| { |
| zlog_warn ("Neighbor %s doesnt have connected network", |
| inet_ntoa (p->prefix)); |
| continue; |
| } |
| |
| /* Set destination address and port */ |
| memset (&to, 0, sizeof (struct sockaddr_in)); |
| to.sin_addr = p->prefix; |
| to.sin_port = htons (RIP_PORT_DEFAULT); |
| |
| /* RIP version is rip's configuration. */ |
| rip_output_process (connected, &to, route_type, rip->version_send); |
| } |
| } |
| |
| /* RIP's periodical timer. */ |
| static int |
| rip_update (struct thread *t) |
| { |
| /* Clear timer pointer. */ |
| rip->t_update = NULL; |
| |
| if (IS_RIP_DEBUG_EVENT) |
| zlog_debug ("update timer fire!"); |
| |
| /* Process update output. */ |
| rip_update_process (rip_all_route); |
| |
| /* Triggered updates may be suppressed if a regular update is due by |
| the time the triggered update would be sent. */ |
| if (rip->t_triggered_interval) |
| { |
| thread_cancel (rip->t_triggered_interval); |
| rip->t_triggered_interval = NULL; |
| } |
| rip->trigger = 0; |
| |
| /* Register myself. */ |
| rip_event (RIP_UPDATE_EVENT, 0); |
| |
| return 0; |
| } |
| |
| /* Walk down the RIP routing table then clear changed flag. */ |
| static void |
| rip_clear_changed_flag (void) |
| { |
| struct route_node *rp; |
| struct rip_info *rinfo = NULL; |
| struct list *list = NULL; |
| struct listnode *listnode = NULL; |
| |
| for (rp = route_top (rip->table); rp; rp = route_next (rp)) |
| if ((list = rp->info) != NULL) |
| for (ALL_LIST_ELEMENTS_RO (list, listnode, rinfo)) |
| { |
| UNSET_FLAG (rinfo->flags, RIP_RTF_CHANGED); |
| /* This flag can be set only on the first entry. */ |
| break; |
| } |
| } |
| |
| /* Triggered update interval timer. */ |
| static int |
| rip_triggered_interval (struct thread *t) |
| { |
| int rip_triggered_update (struct thread *); |
| |
| rip->t_triggered_interval = NULL; |
| |
| if (rip->trigger) |
| { |
| rip->trigger = 0; |
| rip_triggered_update (t); |
| } |
| return 0; |
| } |
| |
| /* Execute triggered update. */ |
| static int |
| rip_triggered_update (struct thread *t) |
| { |
| int interval; |
| |
| /* Clear thred pointer. */ |
| rip->t_triggered_update = NULL; |
| |
| /* Cancel interval timer. */ |
| if (rip->t_triggered_interval) |
| { |
| thread_cancel (rip->t_triggered_interval); |
| rip->t_triggered_interval = NULL; |
| } |
| rip->trigger = 0; |
| |
| /* Logging triggered update. */ |
| if (IS_RIP_DEBUG_EVENT) |
| zlog_debug ("triggered update!"); |
| |
| /* Split Horizon processing is done when generating triggered |
| updates as well as normal updates (see section 2.6). */ |
| rip_update_process (rip_changed_route); |
| |
| /* Once all of the triggered updates have been generated, the route |
| change flags should be cleared. */ |
| rip_clear_changed_flag (); |
| |
| /* After a triggered update is sent, a timer should be set for a |
| random interval between 1 and 5 seconds. If other changes that |
| would trigger updates occur before the timer expires, a single |
| update is triggered when the timer expires. */ |
| interval = (random () % 5) + 1; |
| |
| rip->t_triggered_interval = |
| thread_add_timer (master, rip_triggered_interval, NULL, interval); |
| |
| return 0; |
| } |
| |
| /* Withdraw redistributed route. */ |
| void |
| rip_redistribute_withdraw (int type) |
| { |
| struct route_node *rp; |
| struct rip_info *rinfo = NULL; |
| struct list *list = NULL; |
| |
| if (!rip) |
| return; |
| |
| for (rp = route_top (rip->table); rp; rp = route_next (rp)) |
| if ((list = rp->info) != NULL) |
| { |
| rinfo = listgetdata (listhead (list)); |
| if (rinfo->type == type |
| && rinfo->sub_type != RIP_ROUTE_INTERFACE) |
| { |
| /* Perform poisoned reverse. */ |
| rinfo->metric = RIP_METRIC_INFINITY; |
| RIP_TIMER_ON (rinfo->t_garbage_collect, |
| rip_garbage_collect, rip->garbage_time); |
| RIP_TIMER_OFF (rinfo->t_timeout); |
| rinfo->flags |= RIP_RTF_CHANGED; |
| |
| if (IS_RIP_DEBUG_EVENT) { |
| struct prefix_ipv4 *p = (struct prefix_ipv4 *) &rp->p; |
| |
| zlog_debug ("Poisone %s/%d on the interface %s with an infinity metric [withdraw]", |
| inet_ntoa(p->prefix), p->prefixlen, |
| ifindex2ifname(rinfo->ifindex)); |
| } |
| |
| rip_event (RIP_TRIGGERED_UPDATE, 0); |
| } |
| } |
| } |
| |
| /* Create new RIP instance and set it to global variable. */ |
| static int |
| rip_create (void) |
| { |
| rip = XCALLOC (MTYPE_RIP, sizeof (struct rip)); |
| |
| /* Set initial value. */ |
| rip->version_send = RI_RIP_VERSION_2; |
| rip->version_recv = RI_RIP_VERSION_1_AND_2; |
| rip->update_time = RIP_UPDATE_TIMER_DEFAULT; |
| rip->timeout_time = RIP_TIMEOUT_TIMER_DEFAULT; |
| rip->garbage_time = RIP_GARBAGE_TIMER_DEFAULT; |
| rip->default_metric = RIP_DEFAULT_METRIC_DEFAULT; |
| |
| /* Initialize RIP routig table. */ |
| rip->table = route_table_init (); |
| rip->route = route_table_init (); |
| rip->neighbor = route_table_init (); |
| |
| /* Make output stream. */ |
| rip->obuf = stream_new (1500); |
| |
| /* Make socket. */ |
| rip->sock = rip_create_socket (NULL); |
| if (rip->sock < 0) |
| return rip->sock; |
| |
| /* Create read and timer thread. */ |
| rip_event (RIP_READ, rip->sock); |
| rip_event (RIP_UPDATE_EVENT, 1); |
| |
| return 0; |
| } |
| |
| /* Sned RIP request to the destination. */ |
| int |
| rip_request_send (struct sockaddr_in *to, struct interface *ifp, |
| u_char version, struct connected *connected) |
| { |
| struct rte *rte; |
| struct rip_packet rip_packet; |
| struct listnode *node, *nnode; |
| |
| memset (&rip_packet, 0, sizeof (rip_packet)); |
| |
| rip_packet.command = RIP_REQUEST; |
| rip_packet.version = version; |
| rte = rip_packet.rte; |
| rte->metric = htonl (RIP_METRIC_INFINITY); |
| |
| if (connected) |
| { |
| /* |
| * connected is only sent for ripv1 case, or when |
| * interface does not support multicast. Caller loops |
| * over each connected address for this case. |
| */ |
| if (rip_send_packet ((u_char *) &rip_packet, sizeof (rip_packet), |
| to, connected) != sizeof (rip_packet)) |
| return -1; |
| else |
| return sizeof (rip_packet); |
| } |
| |
| /* send request on each connected network */ |
| for (ALL_LIST_ELEMENTS (ifp->connected, node, nnode, connected)) |
| { |
| struct prefix_ipv4 *p; |
| |
| p = (struct prefix_ipv4 *) connected->address; |
| |
| if (p->family != AF_INET) |
| continue; |
| |
| if (rip_send_packet ((u_char *) &rip_packet, sizeof (rip_packet), |
| to, connected) != sizeof (rip_packet)) |
| return -1; |
| } |
| return sizeof (rip_packet); |
| } |
| |
| static int |
| rip_update_jitter (unsigned long time) |
| { |
| #define JITTER_BOUND 4 |
| /* We want to get the jitter to +/- 1/JITTER_BOUND the interval. |
| Given that, we cannot let time be less than JITTER_BOUND seconds. |
| The RIPv2 RFC says jitter should be small compared to |
| update_time. We consider 1/JITTER_BOUND to be small. |
| */ |
| |
| int jitter_input = time; |
| int jitter; |
| |
| if (jitter_input < JITTER_BOUND) |
| jitter_input = JITTER_BOUND; |
| |
| jitter = (((random () % ((jitter_input * 2) + 1)) - jitter_input)); |
| |
| return jitter/JITTER_BOUND; |
| } |
| |
| void |
| rip_event (enum rip_event event, int sock) |
| { |
| int jitter = 0; |
| |
| switch (event) |
| { |
| case RIP_READ: |
| rip->t_read = thread_add_read (master, rip_read, NULL, sock); |
| break; |
| case RIP_UPDATE_EVENT: |
| if (rip->t_update) |
| { |
| thread_cancel (rip->t_update); |
| rip->t_update = NULL; |
| } |
| jitter = rip_update_jitter (rip->update_time); |
| rip->t_update = |
| thread_add_timer (master, rip_update, NULL, |
| sock ? 2 : rip->update_time + jitter); |
| break; |
| case RIP_TRIGGERED_UPDATE: |
| if (rip->t_triggered_interval) |
| rip->trigger = 1; |
| else if (! rip->t_triggered_update) |
| rip->t_triggered_update = |
| thread_add_event (master, rip_triggered_update, NULL, 0); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| DEFUN (router_rip, |
| router_rip_cmd, |
| "router rip", |
| "Enable a routing process\n" |
| "Routing Information Protocol (RIP)\n") |
| { |
| int ret; |
| |
| /* If rip is not enabled before. */ |
| if (! rip) |
| { |
| ret = rip_create (); |
| if (ret < 0) |
| { |
| zlog_info ("Can't create RIP"); |
| return CMD_WARNING; |
| } |
| } |
| vty->node = RIP_NODE; |
| vty->index = rip; |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (no_router_rip, |
| no_router_rip_cmd, |
| "no router rip", |
| NO_STR |
| "Enable a routing process\n" |
| "Routing Information Protocol (RIP)\n") |
| { |
| if (rip) |
| rip_clean (); |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (rip_version, |
| rip_version_cmd, |
| "version <1-2>", |
| "Set routing protocol version\n" |
| "version\n") |
| { |
| int version; |
| |
| version = atoi (argv[0]); |
| if (version != RIPv1 && version != RIPv2) |
| { |
| vty_out (vty, "invalid rip version %d%s", version, |
| VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| rip->version_send = version; |
| rip->version_recv = version; |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (no_rip_version, |
| no_rip_version_cmd, |
| "no version", |
| NO_STR |
| "Set routing protocol version\n") |
| { |
| /* Set RIP version to the default. */ |
| rip->version_send = RI_RIP_VERSION_2; |
| rip->version_recv = RI_RIP_VERSION_1_AND_2; |
| |
| return CMD_SUCCESS; |
| } |
| |
| ALIAS (no_rip_version, |
| no_rip_version_val_cmd, |
| "no version <1-2>", |
| NO_STR |
| "Set routing protocol version\n" |
| "version\n") |
| |
| DEFUN (rip_route, |
| rip_route_cmd, |
| "route A.B.C.D/M", |
| "RIP static route configuration\n" |
| "IP prefix <network>/<length>\n") |
| { |
| int ret; |
| struct prefix_ipv4 p; |
| struct route_node *node; |
| |
| ret = str2prefix_ipv4 (argv[0], &p); |
| if (ret < 0) |
| { |
| vty_out (vty, "Malformed address%s", VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| apply_mask_ipv4 (&p); |
| |
| /* For router rip configuration. */ |
| node = route_node_get (rip->route, (struct prefix *) &p); |
| |
| if (node->info) |
| { |
| vty_out (vty, "There is already same static route.%s", VTY_NEWLINE); |
| route_unlock_node (node); |
| return CMD_WARNING; |
| } |
| |
| node->info = (char *)"static"; |
| |
| rip_redistribute_add (ZEBRA_ROUTE_RIP, RIP_ROUTE_STATIC, &p, 0, NULL, 0, 0); |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (no_rip_route, |
| no_rip_route_cmd, |
| "no route A.B.C.D/M", |
| NO_STR |
| "RIP static route configuration\n" |
| "IP prefix <network>/<length>\n") |
| { |
| int ret; |
| struct prefix_ipv4 p; |
| struct route_node *node; |
| |
| ret = str2prefix_ipv4 (argv[0], &p); |
| if (ret < 0) |
| { |
| vty_out (vty, "Malformed address%s", VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| apply_mask_ipv4 (&p); |
| |
| /* For router rip configuration. */ |
| node = route_node_lookup (rip->route, (struct prefix *) &p); |
| if (! node) |
| { |
| vty_out (vty, "Can't find route %s.%s", argv[0], |
| VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| rip_redistribute_delete (ZEBRA_ROUTE_RIP, RIP_ROUTE_STATIC, &p, 0); |
| route_unlock_node (node); |
| |
| node->info = NULL; |
| route_unlock_node (node); |
| |
| return CMD_SUCCESS; |
| } |
| |
| #if 0 |
| static void |
| rip_update_default_metric (void) |
| { |
| struct route_node *np; |
| struct rip_info *rinfo = NULL; |
| struct list *list = NULL; |
| struct listnode *listnode = NULL; |
| |
| for (np = route_top (rip->table); np; np = route_next (np)) |
| if ((list = np->info) != NULL) |
| for (ALL_LIST_ELEMENTS_RO (list, listnode, rinfo)) |
| if (rinfo->type != ZEBRA_ROUTE_RIP && rinfo->type != ZEBRA_ROUTE_CONNECT) |
| rinfo->metric = rip->default_metric; |
| } |
| #endif |
| |
| DEFUN (rip_default_metric, |
| rip_default_metric_cmd, |
| "default-metric <1-16>", |
| "Set a metric of redistribute routes\n" |
| "Default metric\n") |
| { |
| if (rip) |
| { |
| rip->default_metric = atoi (argv[0]); |
| /* rip_update_default_metric (); */ |
| } |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (no_rip_default_metric, |
| no_rip_default_metric_cmd, |
| "no default-metric", |
| NO_STR |
| "Set a metric of redistribute routes\n" |
| "Default metric\n") |
| { |
| if (rip) |
| { |
| rip->default_metric = RIP_DEFAULT_METRIC_DEFAULT; |
| /* rip_update_default_metric (); */ |
| } |
| return CMD_SUCCESS; |
| } |
| |
| ALIAS (no_rip_default_metric, |
| no_rip_default_metric_val_cmd, |
| "no default-metric <1-16>", |
| NO_STR |
| "Set a metric of redistribute routes\n" |
| "Default metric\n") |
| |
| DEFUN (rip_timers, |
| rip_timers_cmd, |
| "timers basic <5-2147483647> <5-2147483647> <5-2147483647>", |
| "Adjust routing timers\n" |
| "Basic routing protocol update timers\n" |
| "Routing table update timer value in second. Default is 30.\n" |
| "Routing information timeout timer. Default is 180.\n" |
| "Garbage collection timer. Default is 120.\n") |
| { |
| unsigned long update; |
| unsigned long timeout; |
| unsigned long garbage; |
| char *endptr = NULL; |
| unsigned long RIP_TIMER_MAX = 2147483647; |
| unsigned long RIP_TIMER_MIN = 5; |
| |
| update = strtoul (argv[0], &endptr, 10); |
| if (update > RIP_TIMER_MAX || update < RIP_TIMER_MIN || *endptr != '\0') |
| { |
| vty_out (vty, "update timer value error%s", VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| timeout = strtoul (argv[1], &endptr, 10); |
| if (timeout > RIP_TIMER_MAX || timeout < RIP_TIMER_MIN || *endptr != '\0') |
| { |
| vty_out (vty, "timeout timer value error%s", VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| garbage = strtoul (argv[2], &endptr, 10); |
| if (garbage > RIP_TIMER_MAX || garbage < RIP_TIMER_MIN || *endptr != '\0') |
| { |
| vty_out (vty, "garbage timer value error%s", VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| /* Set each timer value. */ |
| rip->update_time = update; |
| rip->timeout_time = timeout; |
| rip->garbage_time = garbage; |
| |
| /* Reset update timer thread. */ |
| rip_event (RIP_UPDATE_EVENT, 0); |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (no_rip_timers, |
| no_rip_timers_cmd, |
| "no timers basic", |
| NO_STR |
| "Adjust routing timers\n" |
| "Basic routing protocol update timers\n") |
| { |
| /* Set each timer value to the default. */ |
| rip->update_time = RIP_UPDATE_TIMER_DEFAULT; |
| rip->timeout_time = RIP_TIMEOUT_TIMER_DEFAULT; |
| rip->garbage_time = RIP_GARBAGE_TIMER_DEFAULT; |
| |
| /* Reset update timer thread. */ |
| rip_event (RIP_UPDATE_EVENT, 0); |
| |
| return CMD_SUCCESS; |
| } |
| |
| ALIAS (no_rip_timers, |
| no_rip_timers_val_cmd, |
| "no timers basic <0-65535> <0-65535> <0-65535>", |
| NO_STR |
| "Adjust routing timers\n" |
| "Basic routing protocol update timers\n" |
| "Routing table update timer value in second. Default is 30.\n" |
| "Routing information timeout timer. Default is 180.\n" |
| "Garbage collection timer. Default is 120.\n") |
| |
| |
| struct route_table *rip_distance_table; |
| |
| struct rip_distance |
| { |
| /* Distance value for the IP source prefix. */ |
| u_char distance; |
| |
| /* Name of the access-list to be matched. */ |
| char *access_list; |
| }; |
| |
| static struct rip_distance * |
| rip_distance_new (void) |
| { |
| return XCALLOC (MTYPE_RIP_DISTANCE, sizeof (struct rip_distance)); |
| } |
| |
| static void |
| rip_distance_free (struct rip_distance *rdistance) |
| { |
| XFREE (MTYPE_RIP_DISTANCE, rdistance); |
| } |
| |
| static int |
| rip_distance_set (struct vty *vty, const char *distance_str, const char *ip_str, |
| const char *access_list_str) |
| { |
| int ret; |
| struct prefix_ipv4 p; |
| u_char distance; |
| struct route_node *rn; |
| struct rip_distance *rdistance; |
| |
| ret = str2prefix_ipv4 (ip_str, &p); |
| if (ret == 0) |
| { |
| vty_out (vty, "Malformed prefix%s", VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| distance = atoi (distance_str); |
| |
| /* Get RIP distance node. */ |
| rn = route_node_get (rip_distance_table, (struct prefix *) &p); |
| if (rn->info) |
| { |
| rdistance = rn->info; |
| route_unlock_node (rn); |
| } |
| else |
| { |
| rdistance = rip_distance_new (); |
| rn->info = rdistance; |
| } |
| |
| /* Set distance value. */ |
| rdistance->distance = distance; |
| |
| /* Reset access-list configuration. */ |
| if (rdistance->access_list) |
| { |
| free (rdistance->access_list); |
| rdistance->access_list = NULL; |
| } |
| if (access_list_str) |
| rdistance->access_list = strdup (access_list_str); |
| |
| return CMD_SUCCESS; |
| } |
| |
| static int |
| rip_distance_unset (struct vty *vty, const char *distance_str, |
| const char *ip_str, const char *access_list_str) |
| { |
| int ret; |
| struct prefix_ipv4 p; |
| struct route_node *rn; |
| struct rip_distance *rdistance; |
| |
| ret = str2prefix_ipv4 (ip_str, &p); |
| if (ret == 0) |
| { |
| vty_out (vty, "Malformed prefix%s", VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| rn = route_node_lookup (rip_distance_table, (struct prefix *)&p); |
| if (! rn) |
| { |
| vty_out (vty, "Can't find specified prefix%s", VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| rdistance = rn->info; |
| |
| if (rdistance->access_list) |
| free (rdistance->access_list); |
| rip_distance_free (rdistance); |
| |
| rn->info = NULL; |
| route_unlock_node (rn); |
| route_unlock_node (rn); |
| |
| return CMD_SUCCESS; |
| } |
| |
| static void |
| rip_distance_reset (void) |
| { |
| struct route_node *rn; |
| struct rip_distance *rdistance; |
| |
| for (rn = route_top (rip_distance_table); rn; rn = route_next (rn)) |
| if ((rdistance = rn->info) != NULL) |
| { |
| if (rdistance->access_list) |
| free (rdistance->access_list); |
| rip_distance_free (rdistance); |
| rn->info = NULL; |
| route_unlock_node (rn); |
| } |
| } |
| |
| /* Apply RIP information to distance method. */ |
| u_char |
| rip_distance_apply (struct rip_info *rinfo) |
| { |
| struct route_node *rn; |
| struct prefix_ipv4 p; |
| struct rip_distance *rdistance; |
| struct access_list *alist; |
| |
| if (! rip) |
| return 0; |
| |
| memset (&p, 0, sizeof (struct prefix_ipv4)); |
| p.family = AF_INET; |
| p.prefix = rinfo->from; |
| p.prefixlen = IPV4_MAX_BITLEN; |
| |
| /* Check source address. */ |
| rn = route_node_match (rip_distance_table, (struct prefix *) &p); |
| if (rn) |
| { |
| rdistance = rn->info; |
| route_unlock_node (rn); |
| |
| if (rdistance->access_list) |
| { |
| alist = access_list_lookup (AFI_IP, rdistance->access_list); |
| if (alist == NULL) |
| return 0; |
| if (access_list_apply (alist, &rinfo->rp->p) == FILTER_DENY) |
| return 0; |
| |
| return rdistance->distance; |
| } |
| else |
| return rdistance->distance; |
| } |
| |
| if (rip->distance) |
| return rip->distance; |
| |
| return 0; |
| } |
| |
| static void |
| rip_distance_show (struct vty *vty) |
| { |
| struct route_node *rn; |
| struct rip_distance *rdistance; |
| int header = 1; |
| char buf[BUFSIZ]; |
| |
| vty_out (vty, " Distance: (default is %d)%s", |
| rip->distance ? rip->distance :ZEBRA_RIP_DISTANCE_DEFAULT, |
| VTY_NEWLINE); |
| |
| for (rn = route_top (rip_distance_table); rn; rn = route_next (rn)) |
| if ((rdistance = rn->info) != NULL) |
| { |
| if (header) |
| { |
| vty_out (vty, " Address Distance List%s", |
| VTY_NEWLINE); |
| header = 0; |
| } |
| sprintf (buf, "%s/%d", inet_ntoa (rn->p.u.prefix4), rn->p.prefixlen); |
| vty_out (vty, " %-20s %4d %s%s", |
| buf, rdistance->distance, |
| rdistance->access_list ? rdistance->access_list : "", |
| VTY_NEWLINE); |
| } |
| } |
| |
| DEFUN (rip_distance, |
| rip_distance_cmd, |
| "distance <1-255>", |
| "Administrative distance\n" |
| "Distance value\n") |
| { |
| rip->distance = atoi (argv[0]); |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (no_rip_distance, |
| no_rip_distance_cmd, |
| "no distance <1-255>", |
| NO_STR |
| "Administrative distance\n" |
| "Distance value\n") |
| { |
| rip->distance = 0; |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (rip_distance_source, |
| rip_distance_source_cmd, |
| "distance <1-255> A.B.C.D/M", |
| "Administrative distance\n" |
| "Distance value\n" |
| "IP source prefix\n") |
| { |
| rip_distance_set (vty, argv[0], argv[1], NULL); |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (no_rip_distance_source, |
| no_rip_distance_source_cmd, |
| "no distance <1-255> A.B.C.D/M", |
| NO_STR |
| "Administrative distance\n" |
| "Distance value\n" |
| "IP source prefix\n") |
| { |
| rip_distance_unset (vty, argv[0], argv[1], NULL); |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (rip_distance_source_access_list, |
| rip_distance_source_access_list_cmd, |
| "distance <1-255> A.B.C.D/M WORD", |
| "Administrative distance\n" |
| "Distance value\n" |
| "IP source prefix\n" |
| "Access list name\n") |
| { |
| rip_distance_set (vty, argv[0], argv[1], argv[2]); |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (no_rip_distance_source_access_list, |
| no_rip_distance_source_access_list_cmd, |
| "no distance <1-255> A.B.C.D/M WORD", |
| NO_STR |
| "Administrative distance\n" |
| "Distance value\n" |
| "IP source prefix\n" |
| "Access list name\n") |
| { |
| rip_distance_unset (vty, argv[0], argv[1], argv[2]); |
| return CMD_SUCCESS; |
| } |
| |
| /* Update ECMP routes to zebra when ECMP is disabled. */ |
| static void |
| rip_ecmp_disable (void) |
| { |
| struct route_node *rp; |
| struct rip_info *rinfo, *tmp_rinfo; |
| struct list *list; |
| struct listnode *node, *nextnode; |
| |
| if (!rip) |
| return; |
| |
| for (rp = route_top (rip->table); rp; rp = route_next (rp)) |
| if ((list = rp->info) != NULL && listcount (list) > 1) |
| { |
| rinfo = listgetdata (listhead (list)); |
| if (!rip_route_rte (rinfo)) |
| continue; |
| |
| /* Drop all other entries, except the first one. */ |
| for (ALL_LIST_ELEMENTS (list, node, nextnode, tmp_rinfo)) |
| if (tmp_rinfo != rinfo) |
| { |
| RIP_TIMER_OFF (tmp_rinfo->t_timeout); |
| RIP_TIMER_OFF (tmp_rinfo->t_garbage_collect); |
| list_delete_node (list, node); |
| rip_info_free (tmp_rinfo); |
| } |
| |
| /* Update zebra. */ |
| rip_zebra_ipv4_add (rp); |
| |
| /* Set the route change flag. */ |
| SET_FLAG (rinfo->flags, RIP_RTF_CHANGED); |
| |
| /* Signal the output process to trigger an update. */ |
| rip_event (RIP_TRIGGERED_UPDATE, 0); |
| } |
| } |
| |
| DEFUN (rip_allow_ecmp, |
| rip_allow_ecmp_cmd, |
| "allow-ecmp", |
| "Allow Equal Cost MultiPath\n") |
| { |
| if (rip->ecmp) |
| { |
| vty_out (vty, "ECMP is already enabled.%s", VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| rip->ecmp = 1; |
| zlog_info ("ECMP is enabled."); |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (no_rip_allow_ecmp, |
| no_rip_allow_ecmp_cmd, |
| "no allow-ecmp", |
| NO_STR |
| "Allow Equal Cost MultiPath\n") |
| { |
| if (!rip->ecmp) |
| { |
| vty_out (vty, "ECMP is already disabled.%s", VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| rip->ecmp = 0; |
| zlog_info ("ECMP is disabled."); |
| rip_ecmp_disable (); |
| return CMD_SUCCESS; |
| } |
| |
| /* Print out routes update time. */ |
| static void |
| rip_vty_out_uptime (struct vty *vty, struct rip_info *rinfo) |
| { |
| time_t clock; |
| struct tm *tm; |
| #define TIME_BUF 25 |
| char timebuf [TIME_BUF]; |
| struct thread *thread; |
| |
| if ((thread = rinfo->t_timeout) != NULL) |
| { |
| clock = thread_timer_remain_second (thread); |
| tm = gmtime (&clock); |
| strftime (timebuf, TIME_BUF, "%M:%S", tm); |
| vty_out (vty, "%5s", timebuf); |
| } |
| else if ((thread = rinfo->t_garbage_collect) != NULL) |
| { |
| clock = thread_timer_remain_second (thread); |
| tm = gmtime (&clock); |
| strftime (timebuf, TIME_BUF, "%M:%S", tm); |
| vty_out (vty, "%5s", timebuf); |
| } |
| } |
| |
| static const char * |
| rip_route_type_print (int sub_type) |
| { |
| switch (sub_type) |
| { |
| case RIP_ROUTE_RTE: |
| return "n"; |
| case RIP_ROUTE_STATIC: |
| return "s"; |
| case RIP_ROUTE_DEFAULT: |
| return "d"; |
| case RIP_ROUTE_REDISTRIBUTE: |
| return "r"; |
| case RIP_ROUTE_INTERFACE: |
| return "i"; |
| default: |
| return "?"; |
| } |
| } |
| |
| DEFUN (show_ip_rip, |
| show_ip_rip_cmd, |
| "show ip rip", |
| SHOW_STR |
| IP_STR |
| "Show RIP routes\n") |
| { |
| struct route_node *np; |
| struct rip_info *rinfo = NULL; |
| struct list *list = NULL; |
| struct listnode *listnode = NULL; |
| |
| if (! rip) |
| return CMD_SUCCESS; |
| |
| vty_out (vty, "Codes: R - RIP, C - connected, S - Static, O - OSPF, B - BGP%s" |
| "Sub-codes:%s" |
| " (n) - normal, (s) - static, (d) - default, (r) - redistribute,%s" |
| " (i) - interface%s%s" |
| " Network Next Hop Metric From Tag Time%s", |
| VTY_NEWLINE, VTY_NEWLINE, VTY_NEWLINE, VTY_NEWLINE, VTY_NEWLINE, VTY_NEWLINE); |
| |
| for (np = route_top (rip->table); np; np = route_next (np)) |
| if ((list = np->info) != NULL) |
| for (ALL_LIST_ELEMENTS_RO (list, listnode, rinfo)) |
| { |
| int len; |
| |
| len = vty_out (vty, "%c(%s) %s/%d", |
| /* np->lock, For debugging. */ |
| zebra_route_char(rinfo->type), |
| rip_route_type_print (rinfo->sub_type), |
| inet_ntoa (np->p.u.prefix4), np->p.prefixlen); |
| |
| len = 24 - len; |
| |
| if (len > 0) |
| vty_out (vty, "%*s", len, " "); |
| |
| if (rinfo->nexthop.s_addr) |
| vty_out (vty, "%-20s %2d ", inet_ntoa (rinfo->nexthop), |
| rinfo->metric); |
| else |
| vty_out (vty, "0.0.0.0 %2d ", rinfo->metric); |
| |
| /* Route which exist in kernel routing table. */ |
| if ((rinfo->type == ZEBRA_ROUTE_RIP) && |
| (rinfo->sub_type == RIP_ROUTE_RTE)) |
| { |
| vty_out (vty, "%-15s ", inet_ntoa (rinfo->from)); |
| vty_out (vty, "%3d ", rinfo->tag); |
| rip_vty_out_uptime (vty, rinfo); |
| } |
| else if (rinfo->metric == RIP_METRIC_INFINITY) |
| { |
| vty_out (vty, "self "); |
| vty_out (vty, "%3d ", rinfo->tag); |
| rip_vty_out_uptime (vty, rinfo); |
| } |
| else |
| { |
| if (rinfo->external_metric) |
| { |
| len = vty_out (vty, "self (%s:%d)", |
| zebra_route_string(rinfo->type), |
| rinfo->external_metric); |
| len = 16 - len; |
| if (len > 0) |
| vty_out (vty, "%*s", len, " "); |
| } |
| else |
| vty_out (vty, "self "); |
| vty_out (vty, "%3d", rinfo->tag); |
| } |
| |
| vty_out (vty, "%s", VTY_NEWLINE); |
| } |
| return CMD_SUCCESS; |
| } |
| |
| /* Vincent: formerly, it was show_ip_protocols_rip: "show ip protocols" */ |
| DEFUN (show_ip_rip_status, |
| show_ip_rip_status_cmd, |
| "show ip rip status", |
| SHOW_STR |
| IP_STR |
| "Show RIP routes\n" |
| "IP routing protocol process parameters and statistics\n") |
| { |
| struct listnode *node; |
| struct interface *ifp; |
| struct rip_interface *ri; |
| extern const struct message ri_version_msg[]; |
| const char *send_version; |
| const char *receive_version; |
| |
| if (! rip) |
| return CMD_SUCCESS; |
| |
| vty_out (vty, "Routing Protocol is \"rip\"%s", VTY_NEWLINE); |
| vty_out (vty, " Sending updates every %ld seconds with +/-50%%,", |
| rip->update_time); |
| vty_out (vty, " next due in %lu seconds%s", |
| thread_timer_remain_second(rip->t_update), |
| VTY_NEWLINE); |
| vty_out (vty, " Timeout after %ld seconds,", rip->timeout_time); |
| vty_out (vty, " garbage collect after %ld seconds%s", rip->garbage_time, |
| VTY_NEWLINE); |
| |
| /* Filtering status show. */ |
| config_show_distribute (vty); |
| |
| /* Default metric information. */ |
| vty_out (vty, " Default redistribution metric is %d%s", |
| rip->default_metric, VTY_NEWLINE); |
| |
| /* Redistribute information. */ |
| vty_out (vty, " Redistributing:"); |
| config_write_rip_redistribute (vty, 0); |
| vty_out (vty, "%s", VTY_NEWLINE); |
| |
| vty_out (vty, " Default version control: send version %s,", |
| lookup(ri_version_msg,rip->version_send)); |
| if (rip->version_recv == RI_RIP_VERSION_1_AND_2) |
| vty_out (vty, " receive any version %s", VTY_NEWLINE); |
| else |
| vty_out (vty, " receive version %s %s", |
| lookup(ri_version_msg,rip->version_recv), VTY_NEWLINE); |
| |
| vty_out (vty, " Interface Send Recv Key-chain%s", VTY_NEWLINE); |
| |
| for (ALL_LIST_ELEMENTS_RO (iflist, node, ifp)) |
| { |
| ri = ifp->info; |
| |
| if (!ri->running) |
| continue; |
| |
| if (ri->enable_network || ri->enable_interface) |
| { |
| if (ri->ri_send == RI_RIP_UNSPEC) |
| send_version = lookup (ri_version_msg, rip->version_send); |
| else |
| send_version = lookup (ri_version_msg, ri->ri_send); |
| |
| if (ri->ri_receive == RI_RIP_UNSPEC) |
| receive_version = lookup (ri_version_msg, rip->version_recv); |
| else |
| receive_version = lookup (ri_version_msg, ri->ri_receive); |
| |
| vty_out (vty, " %-17s%-3s %-3s %s%s", ifp->name, |
| send_version, |
| receive_version, |
| ri->key_chain ? ri->key_chain : "", |
| VTY_NEWLINE); |
| } |
| } |
| |
| vty_out (vty, " Routing for Networks:%s", VTY_NEWLINE); |
| config_write_rip_network (vty, 0); |
| |
| { |
| int found_passive = 0; |
| for (ALL_LIST_ELEMENTS_RO (iflist, node, ifp)) |
| { |
| ri = ifp->info; |
| |
| if ((ri->enable_network || ri->enable_interface) && ri->passive) |
| { |
| if (!found_passive) |
| { |
| vty_out (vty, " Passive Interface(s):%s", VTY_NEWLINE); |
| found_passive = 1; |
| } |
| vty_out (vty, " %s%s", ifp->name, VTY_NEWLINE); |
| } |
| } |
| } |
| |
| vty_out (vty, " Routing Information Sources:%s", VTY_NEWLINE); |
| vty_out (vty, " Gateway BadPackets BadRoutes Distance Last Update%s", VTY_NEWLINE); |
| rip_peer_display (vty); |
| |
| rip_distance_show (vty); |
| |
| return CMD_SUCCESS; |
| } |
| |
| /* RIP configuration write function. */ |
| static int |
| config_write_rip (struct vty *vty) |
| { |
| int write = 0; |
| struct route_node *rn; |
| struct rip_distance *rdistance; |
| |
| if (rip) |
| { |
| /* Router RIP statement. */ |
| vty_out (vty, "router rip%s", VTY_NEWLINE); |
| write++; |
| |
| /* RIP version statement. Default is RIP version 2. */ |
| if (rip->version_send != RI_RIP_VERSION_2 |
| || rip->version_recv != RI_RIP_VERSION_1_AND_2) |
| vty_out (vty, " version %d%s", rip->version_send, |
| VTY_NEWLINE); |
| |
| /* RIP timer configuration. */ |
| if (rip->update_time != RIP_UPDATE_TIMER_DEFAULT |
| || rip->timeout_time != RIP_TIMEOUT_TIMER_DEFAULT |
| || rip->garbage_time != RIP_GARBAGE_TIMER_DEFAULT) |
| vty_out (vty, " timers basic %lu %lu %lu%s", |
| rip->update_time, |
| rip->timeout_time, |
| rip->garbage_time, |
| VTY_NEWLINE); |
| |
| /* Default information configuration. */ |
| if (rip->default_information) |
| { |
| if (rip->default_information_route_map) |
| vty_out (vty, " default-information originate route-map %s%s", |
| rip->default_information_route_map, VTY_NEWLINE); |
| else |
| vty_out (vty, " default-information originate%s", |
| VTY_NEWLINE); |
| } |
| |
| /* Redistribute configuration. */ |
| config_write_rip_redistribute (vty, 1); |
| |
| /* RIP offset-list configuration. */ |
| config_write_rip_offset_list (vty); |
| |
| /* RIP enabled network and interface configuration. */ |
| config_write_rip_network (vty, 1); |
| |
| /* RIP default metric configuration */ |
| if (rip->default_metric != RIP_DEFAULT_METRIC_DEFAULT) |
| vty_out (vty, " default-metric %d%s", |
| rip->default_metric, VTY_NEWLINE); |
| |
| /* Distribute configuration. */ |
| write += config_write_distribute (vty); |
| |
| /* Interface routemap configuration */ |
| write += config_write_if_rmap (vty); |
| |
| /* Distance configuration. */ |
| if (rip->distance) |
| vty_out (vty, " distance %d%s", rip->distance, VTY_NEWLINE); |
| |
| /* RIP source IP prefix distance configuration. */ |
| for (rn = route_top (rip_distance_table); rn; rn = route_next (rn)) |
| if ((rdistance = rn->info) != NULL) |
| vty_out (vty, " distance %d %s/%d %s%s", rdistance->distance, |
| inet_ntoa (rn->p.u.prefix4), rn->p.prefixlen, |
| rdistance->access_list ? rdistance->access_list : "", |
| VTY_NEWLINE); |
| |
| /* ECMP configuration. */ |
| if (rip->ecmp) |
| vty_out (vty, " allow-ecmp%s", VTY_NEWLINE); |
| |
| /* RIP static route configuration. */ |
| for (rn = route_top (rip->route); rn; rn = route_next (rn)) |
| if (rn->info) |
| vty_out (vty, " route %s/%d%s", |
| inet_ntoa (rn->p.u.prefix4), |
| rn->p.prefixlen, |
| VTY_NEWLINE); |
| |
| } |
| return write; |
| } |
| |
| /* RIP node structure. */ |
| static struct cmd_node rip_node = |
| { |
| RIP_NODE, |
| "%s(config-router)# ", |
| 1 |
| }; |
| |
| /* Distribute-list update functions. */ |
| static void |
| rip_distribute_update (struct distribute *dist) |
| { |
| struct interface *ifp; |
| struct rip_interface *ri; |
| struct access_list *alist; |
| struct prefix_list *plist; |
| |
| if (! dist->ifname) |
| return; |
| |
| ifp = if_lookup_by_name (dist->ifname); |
| if (ifp == NULL) |
| return; |
| |
| ri = ifp->info; |
| |
| if (dist->list[DISTRIBUTE_IN]) |
| { |
| alist = access_list_lookup (AFI_IP, dist->list[DISTRIBUTE_IN]); |
| if (alist) |
| ri->list[RIP_FILTER_IN] = alist; |
| else |
| ri->list[RIP_FILTER_IN] = NULL; |
| } |
| else |
| ri->list[RIP_FILTER_IN] = NULL; |
| |
| if (dist->list[DISTRIBUTE_OUT]) |
| { |
| alist = access_list_lookup (AFI_IP, dist->list[DISTRIBUTE_OUT]); |
| if (alist) |
| ri->list[RIP_FILTER_OUT] = alist; |
| else |
| ri->list[RIP_FILTER_OUT] = NULL; |
| } |
| else |
| ri->list[RIP_FILTER_OUT] = NULL; |
| |
| if (dist->prefix[DISTRIBUTE_IN]) |
| { |
| plist = prefix_list_lookup (AFI_IP, dist->prefix[DISTRIBUTE_IN]); |
| if (plist) |
| ri->prefix[RIP_FILTER_IN] = plist; |
| else |
| ri->prefix[RIP_FILTER_IN] = NULL; |
| } |
| else |
| ri->prefix[RIP_FILTER_IN] = NULL; |
| |
| if (dist->prefix[DISTRIBUTE_OUT]) |
| { |
| plist = prefix_list_lookup (AFI_IP, dist->prefix[DISTRIBUTE_OUT]); |
| if (plist) |
| ri->prefix[RIP_FILTER_OUT] = plist; |
| else |
| ri->prefix[RIP_FILTER_OUT] = NULL; |
| } |
| else |
| ri->prefix[RIP_FILTER_OUT] = NULL; |
| } |
| |
| void |
| rip_distribute_update_interface (struct interface *ifp) |
| { |
| struct distribute *dist; |
| |
| dist = distribute_lookup (ifp->name); |
| if (dist) |
| rip_distribute_update (dist); |
| } |
| |
| /* Update all interface's distribute list. */ |
| /* ARGSUSED */ |
| static void |
| rip_distribute_update_all (struct prefix_list *notused) |
| { |
| struct interface *ifp; |
| struct listnode *node, *nnode; |
| |
| for (ALL_LIST_ELEMENTS (iflist, node, nnode, ifp)) |
| rip_distribute_update_interface (ifp); |
| } |
| /* ARGSUSED */ |
| static void |
| rip_distribute_update_all_wrapper(struct access_list *notused) |
| { |
| rip_distribute_update_all(NULL); |
| } |
| |
| /* Delete all added rip route. */ |
| void |
| rip_clean (void) |
| { |
| int i; |
| struct route_node *rp; |
| struct rip_info *rinfo = NULL; |
| struct list *list = NULL; |
| struct listnode *listnode = NULL; |
| |
| if (rip) |
| { |
| /* Clear RIP routes */ |
| for (rp = route_top (rip->table); rp; rp = route_next (rp)) |
| if ((list = rp->info) != NULL) |
| { |
| rinfo = listgetdata (listhead (list)); |
| if (rip_route_rte (rinfo)) |
| rip_zebra_ipv4_delete (rp); |
| |
| for (ALL_LIST_ELEMENTS_RO (list, listnode, rinfo)) |
| { |
| RIP_TIMER_OFF (rinfo->t_timeout); |
| RIP_TIMER_OFF (rinfo->t_garbage_collect); |
| rip_info_free (rinfo); |
| } |
| list_delete (list); |
| rp->info = NULL; |
| route_unlock_node (rp); |
| } |
| |
| /* Cancel RIP related timers. */ |
| RIP_TIMER_OFF (rip->t_update); |
| RIP_TIMER_OFF (rip->t_triggered_update); |
| RIP_TIMER_OFF (rip->t_triggered_interval); |
| |
| /* Cancel read thread. */ |
| if (rip->t_read) |
| { |
| thread_cancel (rip->t_read); |
| rip->t_read = NULL; |
| } |
| |
| /* Close RIP socket. */ |
| if (rip->sock >= 0) |
| { |
| close (rip->sock); |
| rip->sock = -1; |
| } |
| |
| /* Static RIP route configuration. */ |
| for (rp = route_top (rip->route); rp; rp = route_next (rp)) |
| if (rp->info) |
| { |
| rp->info = NULL; |
| route_unlock_node (rp); |
| } |
| |
| /* RIP neighbor configuration. */ |
| for (rp = route_top (rip->neighbor); rp; rp = route_next (rp)) |
| if (rp->info) |
| { |
| rp->info = NULL; |
| route_unlock_node (rp); |
| } |
| |
| /* Redistribute related clear. */ |
| if (rip->default_information_route_map) |
| free (rip->default_information_route_map); |
| |
| for (i = 0; i < ZEBRA_ROUTE_MAX; i++) |
| if (rip->route_map[i].name) |
| free (rip->route_map[i].name); |
| |
| XFREE (MTYPE_ROUTE_TABLE, rip->table); |
| XFREE (MTYPE_ROUTE_TABLE, rip->route); |
| XFREE (MTYPE_ROUTE_TABLE, rip->neighbor); |
| |
| XFREE (MTYPE_RIP, rip); |
| rip = NULL; |
| } |
| |
| rip_clean_network (); |
| rip_passive_nondefault_clean (); |
| rip_offset_clean (); |
| rip_interface_clean (); |
| rip_distance_reset (); |
| rip_redistribute_clean (); |
| } |
| |
| /* Reset all values to the default settings. */ |
| void |
| rip_reset (void) |
| { |
| /* Reset global counters. */ |
| rip_global_route_changes = 0; |
| rip_global_queries = 0; |
| |
| /* Call ripd related reset functions. */ |
| rip_debug_reset (); |
| rip_route_map_reset (); |
| |
| /* Call library reset functions. */ |
| vty_reset (); |
| access_list_reset (); |
| prefix_list_reset (); |
| |
| distribute_list_reset (); |
| |
| rip_interface_reset (); |
| rip_distance_reset (); |
| |
| rip_zclient_reset (); |
| } |
| |
| static void |
| rip_if_rmap_update (struct if_rmap *if_rmap) |
| { |
| struct interface *ifp; |
| struct rip_interface *ri; |
| struct route_map *rmap; |
| |
| ifp = if_lookup_by_name (if_rmap->ifname); |
| if (ifp == NULL) |
| return; |
| |
| ri = ifp->info; |
| |
| if (if_rmap->routemap[IF_RMAP_IN]) |
| { |
| rmap = route_map_lookup_by_name (if_rmap->routemap[IF_RMAP_IN]); |
| if (rmap) |
| ri->routemap[IF_RMAP_IN] = rmap; |
| else |
| ri->routemap[IF_RMAP_IN] = NULL; |
| } |
| else |
| ri->routemap[RIP_FILTER_IN] = NULL; |
| |
| if (if_rmap->routemap[IF_RMAP_OUT]) |
| { |
| rmap = route_map_lookup_by_name (if_rmap->routemap[IF_RMAP_OUT]); |
| if (rmap) |
| ri->routemap[IF_RMAP_OUT] = rmap; |
| else |
| ri->routemap[IF_RMAP_OUT] = NULL; |
| } |
| else |
| ri->routemap[RIP_FILTER_OUT] = NULL; |
| } |
| |
| void |
| rip_if_rmap_update_interface (struct interface *ifp) |
| { |
| struct if_rmap *if_rmap; |
| |
| if_rmap = if_rmap_lookup (ifp->name); |
| if (if_rmap) |
| rip_if_rmap_update (if_rmap); |
| } |
| |
| static void |
| rip_routemap_update_redistribute (void) |
| { |
| int i; |
| |
| if (rip) |
| { |
| for (i = 0; i < ZEBRA_ROUTE_MAX; i++) |
| { |
| if (rip->route_map[i].name) |
| rip->route_map[i].map = |
| route_map_lookup_by_name (rip->route_map[i].name); |
| } |
| } |
| } |
| |
| /* ARGSUSED */ |
| static void |
| rip_routemap_update (const char *notused) |
| { |
| struct interface *ifp; |
| struct listnode *node, *nnode; |
| |
| for (ALL_LIST_ELEMENTS (iflist, node, nnode, ifp)) |
| rip_if_rmap_update_interface (ifp); |
| |
| rip_routemap_update_redistribute (); |
| } |
| |
| /* Allocate new rip structure and set default value. */ |
| void |
| rip_init (void) |
| { |
| /* Randomize for triggered update random(). */ |
| srandom (time (NULL)); |
| |
| /* Install top nodes. */ |
| install_node (&rip_node, config_write_rip); |
| |
| /* Install rip commands. */ |
| install_element (VIEW_NODE, &show_ip_rip_cmd); |
| install_element (VIEW_NODE, &show_ip_rip_status_cmd); |
| install_element (ENABLE_NODE, &show_ip_rip_cmd); |
| install_element (ENABLE_NODE, &show_ip_rip_status_cmd); |
| install_element (CONFIG_NODE, &router_rip_cmd); |
| install_element (CONFIG_NODE, &no_router_rip_cmd); |
| |
| install_default (RIP_NODE); |
| install_element (RIP_NODE, &rip_version_cmd); |
| install_element (RIP_NODE, &no_rip_version_cmd); |
| install_element (RIP_NODE, &no_rip_version_val_cmd); |
| install_element (RIP_NODE, &rip_default_metric_cmd); |
| install_element (RIP_NODE, &no_rip_default_metric_cmd); |
| install_element (RIP_NODE, &no_rip_default_metric_val_cmd); |
| install_element (RIP_NODE, &rip_timers_cmd); |
| install_element (RIP_NODE, &no_rip_timers_cmd); |
| install_element (RIP_NODE, &no_rip_timers_val_cmd); |
| install_element (RIP_NODE, &rip_route_cmd); |
| install_element (RIP_NODE, &no_rip_route_cmd); |
| install_element (RIP_NODE, &rip_distance_cmd); |
| install_element (RIP_NODE, &no_rip_distance_cmd); |
| install_element (RIP_NODE, &rip_distance_source_cmd); |
| install_element (RIP_NODE, &no_rip_distance_source_cmd); |
| install_element (RIP_NODE, &rip_distance_source_access_list_cmd); |
| install_element (RIP_NODE, &no_rip_distance_source_access_list_cmd); |
| install_element (RIP_NODE, &rip_allow_ecmp_cmd); |
| install_element (RIP_NODE, &no_rip_allow_ecmp_cmd); |
| |
| /* Debug related init. */ |
| rip_debug_init (); |
| |
| /* SNMP init. */ |
| #ifdef HAVE_SNMP |
| rip_snmp_init (); |
| #endif /* HAVE_SNMP */ |
| |
| /* Access list install. */ |
| access_list_init (); |
| access_list_add_hook (rip_distribute_update_all_wrapper); |
| access_list_delete_hook (rip_distribute_update_all_wrapper); |
| |
| /* Prefix list initialize.*/ |
| prefix_list_init (); |
| prefix_list_add_hook (rip_distribute_update_all); |
| prefix_list_delete_hook (rip_distribute_update_all); |
| |
| /* Distribute list install. */ |
| distribute_list_init (RIP_NODE); |
| distribute_list_add_hook (rip_distribute_update); |
| distribute_list_delete_hook (rip_distribute_update); |
| |
| /* Route-map */ |
| rip_route_map_init (); |
| rip_offset_init (); |
| |
| route_map_add_hook (rip_routemap_update); |
| route_map_delete_hook (rip_routemap_update); |
| |
| if_rmap_init (RIP_NODE); |
| if_rmap_hook_add (rip_if_rmap_update); |
| if_rmap_hook_delete (rip_if_rmap_update); |
| |
| /* Distance control. */ |
| rip_distance_table = route_table_init (); |
| } |