| /* |
| * Server side of OSPF API. |
| * Copyright (C) 2001, 2002 Ralph Keller |
| * |
| * This file is part of GNU Zebra. |
| * |
| * GNU Zebra is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published |
| * by the Free Software Foundation; either version 2, or (at your |
| * option) any later version. |
| * |
| * GNU Zebra is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with GNU Zebra; see the file COPYING. If not, write to the |
| * Free Software Foundation, Inc., 59 Temple Place - Suite 330, |
| * Boston, MA 02111-1307, USA. |
| */ |
| |
| #include <zebra.h> |
| |
| #ifdef SUPPORT_OSPF_API |
| #ifndef HAVE_OPAQUE_LSA |
| #error "Core Opaque-LSA module must be configured." |
| #endif /* HAVE_OPAQUE_LSA */ |
| |
| #include "linklist.h" |
| #include "prefix.h" |
| #include "if.h" |
| #include "table.h" |
| #include "memory.h" |
| #include "command.h" |
| #include "vty.h" |
| #include "stream.h" |
| #include "log.h" |
| #include "thread.h" |
| #include "hash.h" |
| #include "sockunion.h" /* for inet_aton() */ |
| #include "buffer.h" |
| |
| #include <sys/types.h> |
| |
| #include "ospfd/ospfd.h" /* for "struct thread_master" */ |
| #include "ospfd/ospf_interface.h" |
| #include "ospfd/ospf_ism.h" |
| #include "ospfd/ospf_asbr.h" |
| #include "ospfd/ospf_lsa.h" |
| #include "ospfd/ospf_lsdb.h" |
| #include "ospfd/ospf_neighbor.h" |
| #include "ospfd/ospf_nsm.h" |
| #include "ospfd/ospf_flood.h" |
| #include "ospfd/ospf_packet.h" |
| #include "ospfd/ospf_spf.h" |
| #include "ospfd/ospf_dump.h" |
| #include "ospfd/ospf_route.h" |
| #include "ospfd/ospf_ase.h" |
| #include "ospfd/ospf_zebra.h" |
| |
| #include "ospfd/ospf_api.h" |
| #include "ospfd/ospf_apiserver.h" |
| |
| /* This is an implementation of an API to the OSPF daemon that allows |
| * external applications to access the OSPF daemon through socket |
| * connections. The application can use this API to inject its own |
| * opaque LSAs and flood them to other OSPF daemons. Other OSPF |
| * daemons then receive these LSAs and inform applications through the |
| * API by sending a corresponding message. The application can also |
| * register to receive all LSA types (in addition to opaque types) and |
| * use this information to reconstruct the OSPF's LSDB. The OSPF |
| * daemon supports multiple applications concurrently. */ |
| |
| /* List of all active connections. */ |
| list apiserver_list; |
| |
| /* ----------------------------------------------------------- |
| * Functions to lookup interfaces |
| * ----------------------------------------------------------- |
| */ |
| |
| struct ospf_interface * |
| ospf_apiserver_if_lookup_by_addr (struct in_addr address) |
| { |
| listnode node; |
| struct ospf_interface *oi; |
| struct ospf *ospf; |
| |
| ospf = ospf_get (); |
| assert (ospf); |
| |
| for (node = listhead (ospf->oiflist); node; nextnode (node)) |
| { |
| if ((oi = getdata (node)) != NULL |
| && oi->type != OSPF_IFTYPE_VIRTUALLINK) |
| { |
| if (IPV4_ADDR_SAME (&address, &oi->address->u.prefix4)) |
| return oi; |
| } |
| } |
| return NULL; |
| } |
| |
| struct ospf_interface * |
| ospf_apiserver_if_lookup_by_ifp (struct interface *ifp) |
| { |
| listnode node; |
| struct ospf_interface *oi; |
| struct ospf *ospf; |
| |
| ospf = ospf_get (); |
| assert (ospf); |
| |
| for (node = listhead (ospf->oiflist); node; nextnode (node)) |
| { |
| if ((oi = getdata (node)) && oi->ifp == ifp) |
| { |
| return oi; |
| } |
| } |
| return NULL; |
| } |
| |
| /* ----------------------------------------------------------- |
| * Initialization |
| * ----------------------------------------------------------- |
| */ |
| |
| unsigned short |
| ospf_apiserver_getport (void) |
| { |
| struct servent *sp = getservbyname ("ospfapi", "tcp"); |
| |
| return sp ? ntohs (sp->s_port) : OSPF_API_SYNC_PORT; |
| } |
| |
| /* Initialize OSPF API module. Invoked from ospf_opaque_init() */ |
| int |
| ospf_apiserver_init (void) |
| { |
| int fd; |
| int rc = -1; |
| |
| /* Create new socket for synchronous messages. */ |
| fd = ospf_apiserver_serv_sock_family (ospf_apiserver_getport (), AF_INET); |
| |
| if (fd < 0) |
| goto out; |
| |
| /* Schedule new thread that handles accepted connections. */ |
| ospf_apiserver_event (OSPF_APISERVER_ACCEPT, fd, NULL); |
| |
| /* Initialize list that keeps track of all connections. */ |
| apiserver_list = list_new (); |
| |
| /* Register opaque-independent call back functions. These functions |
| are invoked on ISM, NSM changes and LSA update and LSA deletes */ |
| rc = |
| ospf_register_opaque_functab (0 /* all LSAs */, |
| 0 /* all opaque types */, |
| ospf_apiserver_new_if, |
| ospf_apiserver_del_if, |
| ospf_apiserver_ism_change, |
| ospf_apiserver_nsm_change, |
| NULL, |
| NULL, |
| NULL, |
| NULL, /* ospf_apiserver_show_info */ |
| NULL, /* originator_func */ |
| NULL, /* ospf_apiserver_lsa_refresher */ |
| ospf_apiserver_lsa_update, |
| ospf_apiserver_lsa_delete); |
| if (rc != 0) |
| { |
| zlog_warn ("ospf_apiserver_init: Failed to register opaque type [0/0]"); |
| } |
| |
| rc = 0; |
| |
| out: |
| return rc; |
| } |
| |
| /* Terminate OSPF API module. */ |
| void |
| ospf_apiserver_term (void) |
| { |
| listnode node; |
| |
| /* Unregister wildcard [0/0] type */ |
| ospf_delete_opaque_functab (0 /* all LSAs */, |
| 0 /* all opaque types */); |
| |
| /* Free all client instances */ |
| for (node = listhead (apiserver_list); node; nextnode (node)) |
| { |
| struct ospf_apiserver *apiserv = |
| (struct ospf_apiserver *) getdata (node); |
| ospf_apiserver_free (apiserv); |
| } |
| |
| /* Free client list itself */ |
| list_delete (apiserver_list); |
| |
| /* Free wildcard list */ |
| /* XXX */ |
| } |
| |
| static struct ospf_apiserver * |
| lookup_apiserver (u_char lsa_type, u_char opaque_type) |
| { |
| listnode n1, n2; |
| struct registered_opaque_type *r; |
| struct ospf_apiserver *apiserv, *found = NULL; |
| |
| for (n1 = listhead (apiserver_list); n1; nextnode (n1)) |
| { |
| apiserv = (struct ospf_apiserver *) getdata (n1); |
| |
| for (n2 = listhead (apiserv->opaque_types); n2; nextnode (n2)) |
| { |
| r = (struct registered_opaque_type *) getdata (n2); |
| |
| if (r->lsa_type == lsa_type && r->opaque_type == opaque_type) |
| { |
| found = apiserv; |
| goto out; |
| } |
| } |
| } |
| out: |
| return found; |
| } |
| |
| static struct ospf_apiserver * |
| lookup_apiserver_by_lsa (struct ospf_lsa *lsa) |
| { |
| struct lsa_header *lsah = lsa->data; |
| struct ospf_apiserver *found = NULL; |
| |
| if (IS_OPAQUE_LSA (lsah->type)) |
| { |
| found = lookup_apiserver (lsah->type, |
| GET_OPAQUE_TYPE (ntohl (lsah->id.s_addr))); |
| } |
| return found; |
| } |
| |
| /* ----------------------------------------------------------- |
| * Followings are functions to manage client connections. |
| * ----------------------------------------------------------- |
| */ |
| static int |
| ospf_apiserver_new_lsa_hook (struct ospf_lsa *lsa) |
| { |
| if (IS_DEBUG_OSPF_EVENT) |
| zlog_info ("API: Put LSA(%p)[%s] into reserve, total=%ld", lsa, dump_lsa_key (lsa), lsa->lsdb->total); |
| return 0; |
| } |
| |
| static int |
| ospf_apiserver_del_lsa_hook (struct ospf_lsa *lsa) |
| { |
| if (IS_DEBUG_OSPF_EVENT) |
| zlog_info ("API: Get LSA(%p)[%s] from reserve, total=%ld", lsa, dump_lsa_key (lsa), lsa->lsdb->total); |
| return 0; |
| } |
| |
| /* Allocate new connection structure. */ |
| struct ospf_apiserver * |
| ospf_apiserver_new (int fd_sync, int fd_async) |
| { |
| struct ospf_apiserver *new = |
| XMALLOC (MTYPE_OSPF_APISERVER, sizeof (struct ospf_apiserver)); |
| |
| new->filter = |
| XMALLOC (MTYPE_OSPF_APISERVER_MSGFILTER, sizeof (struct lsa_filter_type)); |
| |
| new->fd_sync = fd_sync; |
| new->fd_async = fd_async; |
| |
| /* list of registered opaque types that application uses */ |
| new->opaque_types = list_new (); |
| |
| /* Initialize temporary strage for LSA instances to be refreshed. */ |
| memset (&new->reserve, 0, sizeof (struct ospf_lsdb)); |
| ospf_lsdb_init (&new->reserve); |
| |
| new->reserve.new_lsa_hook = ospf_apiserver_new_lsa_hook; /* debug */ |
| new->reserve.del_lsa_hook = ospf_apiserver_del_lsa_hook; /* debug */ |
| |
| new->out_sync_fifo = msg_fifo_new (); |
| new->out_async_fifo = msg_fifo_new (); |
| new->t_sync_read = NULL; |
| #ifdef USE_ASYNC_READ |
| new->t_async_read = NULL; |
| #endif /* USE_ASYNC_READ */ |
| new->t_sync_write = NULL; |
| new->t_async_write = NULL; |
| |
| new->filter->typemask = 0; /* filter all LSAs */ |
| new->filter->origin = ANY_ORIGIN; |
| new->filter->num_areas = 0; |
| |
| return new; |
| } |
| |
| void |
| ospf_apiserver_event (enum event event, int fd, |
| struct ospf_apiserver *apiserv) |
| { |
| struct thread *apiserver_serv_thread; |
| |
| switch (event) |
| { |
| case OSPF_APISERVER_ACCEPT: |
| apiserver_serv_thread = |
| thread_add_read (master, ospf_apiserver_accept, apiserv, fd); |
| break; |
| case OSPF_APISERVER_SYNC_READ: |
| apiserv->t_sync_read = |
| thread_add_read (master, ospf_apiserver_read, apiserv, fd); |
| break; |
| #ifdef USE_ASYNC_READ |
| case OSPF_APISERVER_ASYNC_READ: |
| apiserv->t_async_read = |
| thread_add_read (master, ospf_apiserver_read, apiserv, fd); |
| break; |
| #endif /* USE_ASYNC_READ */ |
| case OSPF_APISERVER_SYNC_WRITE: |
| if (!apiserv->t_sync_write) |
| { |
| apiserv->t_sync_write = |
| thread_add_write (master, ospf_apiserver_sync_write, apiserv, fd); |
| } |
| break; |
| case OSPF_APISERVER_ASYNC_WRITE: |
| if (!apiserv->t_async_write) |
| { |
| apiserv->t_async_write = |
| thread_add_write (master, ospf_apiserver_async_write, apiserv, fd); |
| } |
| break; |
| } |
| } |
| |
| /* Free instance. First unregister all opaque types used by |
| application, flush opaque LSAs injected by application |
| from network and close connection. */ |
| void |
| ospf_apiserver_free (struct ospf_apiserver *apiserv) |
| { |
| listnode node; |
| |
| /* Cancel read and write threads. */ |
| if (apiserv->t_sync_read) |
| { |
| thread_cancel (apiserv->t_sync_read); |
| } |
| #ifdef USE_ASYNC_READ |
| if (apiserv->t_async_read) |
| { |
| thread_cancel (apiserv->t_async_read); |
| } |
| #endif /* USE_ASYNC_READ */ |
| if (apiserv->t_sync_write) |
| { |
| thread_cancel (apiserv->t_sync_write); |
| } |
| |
| if (apiserv->t_async_write) |
| { |
| thread_cancel (apiserv->t_async_write); |
| } |
| |
| /* Unregister all opaque types that application registered |
| and flush opaque LSAs if still in LSDB. */ |
| |
| while ((node = listhead (apiserv->opaque_types)) != NULL) |
| { |
| |
| struct registered_opaque_type *regtype = node->data; |
| |
| ospf_apiserver_unregister_opaque_type (apiserv, regtype->lsa_type, |
| regtype->opaque_type); |
| |
| } |
| |
| /* Close connections to OSPFd. */ |
| if (apiserv->fd_sync > 0) |
| { |
| close (apiserv->fd_sync); |
| } |
| |
| if (apiserv->fd_async > 0) |
| { |
| close (apiserv->fd_async); |
| } |
| |
| /* Free fifos */ |
| msg_fifo_free (apiserv->out_sync_fifo); |
| msg_fifo_free (apiserv->out_async_fifo); |
| |
| /* Clear temporary strage for LSA instances to be refreshed. */ |
| ospf_lsdb_delete_all (&apiserv->reserve); |
| ospf_lsdb_cleanup (&apiserv->reserve); |
| |
| /* Remove from the list of active clients. */ |
| listnode_delete (apiserver_list, apiserv); |
| |
| if (IS_DEBUG_OSPF_EVENT) |
| zlog_info ("API: Delete apiserv(%p), total#(%d)", apiserv, apiserver_list->count); |
| |
| /* And free instance. */ |
| XFREE (MTYPE_OSPF_APISERVER, apiserv); |
| } |
| |
| int |
| ospf_apiserver_read (struct thread *thread) |
| { |
| struct ospf_apiserver *apiserv; |
| struct msg *msg; |
| int fd; |
| int rc = -1; |
| enum event event; |
| |
| apiserv = THREAD_ARG (thread); |
| fd = THREAD_FD (thread); |
| |
| if (fd == apiserv->fd_sync) |
| { |
| event = OSPF_APISERVER_SYNC_READ; |
| apiserv->t_sync_read = NULL; |
| |
| if (IS_DEBUG_OSPF_EVENT) |
| zlog_info ("API: ospf_apiserver_read: Peer: %s/%u", |
| inet_ntoa (apiserv->peer_sync.sin_addr), |
| ntohs (apiserv->peer_sync.sin_port)); |
| } |
| #ifdef USE_ASYNC_READ |
| else if (fd == apiserv->fd_async) |
| { |
| event = OSPF_APISERVER_ASYNC_READ; |
| apiserv->t_async_read = NULL; |
| |
| if (IS_DEBUG_OSPF_EVENT) |
| zlog_info ("API: ospf_apiserver_read: Peer: %s/%u", |
| inet_ntoa (apiserv->peer_async.sin_addr), |
| ntohs (apiserv->peer_async.sin_port)); |
| } |
| #endif /* USE_ASYNC_READ */ |
| else |
| { |
| zlog_warn ("ospf_apiserver_read: Unknown fd(%d)", fd); |
| ospf_apiserver_free (apiserv); |
| goto out; |
| } |
| |
| /* Read message from fd. */ |
| msg = msg_read (fd); |
| if (msg == NULL) |
| { |
| zlog_warn |
| ("ospf_apiserver_read: read failed on fd=%d, closing connection", fd); |
| |
| /* Perform cleanup. */ |
| ospf_apiserver_free (apiserv); |
| goto out; |
| } |
| |
| if (IS_DEBUG_OSPF_EVENT) |
| msg_print (msg); |
| |
| /* Dispatch to corresponding message handler. */ |
| rc = ospf_apiserver_handle_msg (apiserv, msg); |
| |
| /* Prepare for next message, add read thread. */ |
| ospf_apiserver_event (event, fd, apiserv); |
| |
| msg_free (msg); |
| |
| out: |
| return rc; |
| } |
| |
| int |
| ospf_apiserver_sync_write (struct thread *thread) |
| { |
| struct ospf_apiserver *apiserv; |
| struct msg *msg; |
| int fd; |
| int rc = -1; |
| |
| apiserv = THREAD_ARG (thread); |
| assert (apiserv); |
| fd = THREAD_FD (thread); |
| |
| apiserv->t_sync_write = NULL; |
| |
| /* Sanity check */ |
| if (fd != apiserv->fd_sync) |
| { |
| zlog_warn ("ospf_apiserver_sync_write: Unknown fd=%d", fd); |
| goto out; |
| } |
| |
| if (IS_DEBUG_OSPF_EVENT) |
| zlog_info ("API: ospf_apiserver_sync_write: Peer: %s/%u", |
| inet_ntoa (apiserv->peer_sync.sin_addr), |
| ntohs (apiserv->peer_sync.sin_port)); |
| |
| /* Check whether there is really a message in the fifo. */ |
| msg = msg_fifo_pop (apiserv->out_sync_fifo); |
| if (!msg) |
| { |
| zlog_warn ("API: ospf_apiserver_sync_write: No message in Sync-FIFO?"); |
| return 0; |
| } |
| |
| if (IS_DEBUG_OSPF_EVENT) |
| msg_print (msg); |
| |
| rc = msg_write (fd, msg); |
| |
| /* Once a message is dequeued, it should be freed anyway. */ |
| msg_free (msg); |
| |
| if (rc < 0) |
| { |
| zlog_warn |
| ("ospf_apiserver_sync_write: write failed on fd=%d", fd); |
| goto out; |
| } |
| |
| |
| /* If more messages are in sync message fifo, schedule write thread. */ |
| if (msg_fifo_head (apiserv->out_sync_fifo)) |
| { |
| ospf_apiserver_event (OSPF_APISERVER_SYNC_WRITE, apiserv->fd_sync, |
| apiserv); |
| } |
| |
| out: |
| |
| if (rc < 0) |
| { |
| /* Perform cleanup and disconnect with peer */ |
| ospf_apiserver_free (apiserv); |
| } |
| |
| return rc; |
| } |
| |
| |
| int |
| ospf_apiserver_async_write (struct thread *thread) |
| { |
| struct ospf_apiserver *apiserv; |
| struct msg *msg; |
| int fd; |
| int rc = -1; |
| |
| apiserv = THREAD_ARG (thread); |
| assert (apiserv); |
| fd = THREAD_FD (thread); |
| |
| apiserv->t_async_write = NULL; |
| |
| /* Sanity check */ |
| if (fd != apiserv->fd_async) |
| { |
| zlog_warn ("ospf_apiserver_async_write: Unknown fd=%d", fd); |
| goto out; |
| } |
| |
| if (IS_DEBUG_OSPF_EVENT) |
| zlog_info ("API: ospf_apiserver_async_write: Peer: %s/%u", |
| inet_ntoa (apiserv->peer_async.sin_addr), |
| ntohs (apiserv->peer_async.sin_port)); |
| |
| /* Check whether there is really a message in the fifo. */ |
| msg = msg_fifo_pop (apiserv->out_async_fifo); |
| if (!msg) |
| { |
| zlog_warn ("API: ospf_apiserver_async_write: No message in Async-FIFO?"); |
| return 0; |
| } |
| |
| if (IS_DEBUG_OSPF_EVENT) |
| msg_print (msg); |
| |
| rc = msg_write (fd, msg); |
| |
| /* Once a message is dequeued, it should be freed anyway. */ |
| msg_free (msg); |
| |
| if (rc < 0) |
| { |
| zlog_warn |
| ("ospf_apiserver_async_write: write failed on fd=%d", fd); |
| goto out; |
| } |
| |
| |
| /* If more messages are in async message fifo, schedule write thread. */ |
| if (msg_fifo_head (apiserv->out_async_fifo)) |
| { |
| ospf_apiserver_event (OSPF_APISERVER_ASYNC_WRITE, apiserv->fd_async, |
| apiserv); |
| } |
| |
| out: |
| |
| if (rc < 0) |
| { |
| /* Perform cleanup and disconnect with peer */ |
| ospf_apiserver_free (apiserv); |
| } |
| |
| return rc; |
| } |
| |
| |
| int |
| ospf_apiserver_serv_sock_family (unsigned short port, int family) |
| { |
| union sockunion su; |
| int accept_sock; |
| int rc; |
| |
| memset (&su, 0, sizeof (union sockunion)); |
| su.sa.sa_family = family; |
| |
| /* Make new socket */ |
| accept_sock = sockunion_stream_socket (&su); |
| if (accept_sock < 0) |
| return accept_sock; |
| |
| /* This is a server, so reuse address and port */ |
| sockopt_reuseaddr (accept_sock); |
| sockopt_reuseport (accept_sock); |
| |
| /* Bind socket to address and given port. */ |
| rc = sockunion_bind (accept_sock, &su, port, NULL); |
| if (rc < 0) |
| { |
| close (accept_sock); /* Close socket */ |
| return rc; |
| } |
| |
| /* Listen socket under queue length 3. */ |
| rc = listen (accept_sock, 3); |
| if (rc < 0) |
| { |
| zlog_warn ("ospf_apiserver_serv_sock_family: listen: %s", |
| strerror (errno)); |
| close (accept_sock); /* Close socket */ |
| return rc; |
| } |
| return accept_sock; |
| } |
| |
| |
| /* Accept connection request from external applications. For each |
| accepted connection allocate own connection instance. */ |
| int |
| ospf_apiserver_accept (struct thread *thread) |
| { |
| int accept_sock; |
| int new_sync_sock; |
| int new_async_sock; |
| union sockunion su; |
| struct ospf_apiserver *apiserv; |
| struct sockaddr_in peer_async; |
| struct sockaddr_in peer_sync; |
| int peerlen; |
| int ret; |
| |
| /* THREAD_ARG (thread) is NULL */ |
| accept_sock = THREAD_FD (thread); |
| |
| /* Keep hearing on socket for further connections. */ |
| ospf_apiserver_event (OSPF_APISERVER_ACCEPT, accept_sock, NULL); |
| |
| memset (&su, 0, sizeof (union sockunion)); |
| /* Accept connection for synchronous messages */ |
| new_sync_sock = sockunion_accept (accept_sock, &su); |
| if (new_sync_sock < 0) |
| { |
| zlog_warn ("ospf_apiserver_accept: accept: %s", strerror (errno)); |
| return -1; |
| } |
| |
| /* Get port address and port number of peer to make reverse connection. |
| The reverse channel uses the port number of the peer port+1. */ |
| |
| memset(&peer_sync, 0, sizeof(struct sockaddr_in)); |
| peerlen = sizeof (struct sockaddr_in); |
| |
| ret = getpeername (new_sync_sock, (struct sockaddr *)&peer_sync, &peerlen); |
| if (ret < 0) |
| { |
| zlog_warn ("ospf_apiserver_accept: getpeername: %s", strerror (errno)); |
| close (new_sync_sock); |
| return -1; |
| } |
| |
| if (IS_DEBUG_OSPF_EVENT) |
| zlog_info ("API: ospf_apiserver_accept: New peer: %s/%u", |
| inet_ntoa (peer_sync.sin_addr), ntohs (peer_sync.sin_port)); |
| |
| /* Create new socket for asynchronous messages. */ |
| peer_async = peer_sync; |
| peer_async.sin_port = htons(ntohs(peer_sync.sin_port) + 1); |
| |
| /* Check if remote port number to make reverse connection is valid one. */ |
| if (ntohs (peer_async.sin_port) == ospf_apiserver_getport ()) |
| { |
| zlog_warn ("API: ospf_apiserver_accept: Peer(%s/%u): Invalid async port number?", |
| inet_ntoa (peer_async.sin_addr), ntohs (peer_async.sin_port)); |
| close (new_sync_sock); |
| return -1; |
| } |
| |
| new_async_sock = socket (AF_INET, SOCK_STREAM, 0); |
| if (new_async_sock < 0) |
| { |
| zlog_warn ("ospf_apiserver_accept: socket: %s", strerror (errno)); |
| close (new_sync_sock); |
| return -1; |
| } |
| |
| ret = connect (new_async_sock, (struct sockaddr *) &peer_async, |
| sizeof (struct sockaddr_in)); |
| |
| if (ret < 0) |
| { |
| zlog_warn ("ospf_apiserver_accept: connect: %s", strerror (errno)); |
| close (new_sync_sock); |
| close (new_async_sock); |
| return -1; |
| } |
| |
| #ifdef USE_ASYNC_READ |
| #else /* USE_ASYNC_READ */ |
| /* Make the asynchronous channel write-only. */ |
| ret = shutdown (new_async_sock, SHUT_RD); |
| if (ret < 0) |
| { |
| zlog_warn ("ospf_apiserver_accept: shutdown: %s", strerror (errno)); |
| close (new_sync_sock); |
| close (new_async_sock); |
| return -1; |
| } |
| #endif /* USE_ASYNC_READ */ |
| |
| /* Allocate new server-side connection structure */ |
| apiserv = ospf_apiserver_new (new_sync_sock, new_async_sock); |
| |
| /* Add to active connection list */ |
| listnode_add (apiserver_list, apiserv); |
| apiserv->peer_sync = peer_sync; |
| apiserv->peer_async = peer_async; |
| |
| /* And add read threads for new connection */ |
| ospf_apiserver_event (OSPF_APISERVER_SYNC_READ, new_sync_sock, apiserv); |
| #ifdef USE_ASYNC_READ |
| ospf_apiserver_event (OSPF_APISERVER_ASYNC_READ, new_async_sock, apiserv); |
| #endif /* USE_ASYNC_READ */ |
| |
| if (IS_DEBUG_OSPF_EVENT) |
| zlog_warn ("API: New apiserv(%p), total#(%d)", apiserv, apiserver_list->count); |
| |
| return 0; |
| } |
| |
| |
| /* ----------------------------------------------------------- |
| * Send reply with return code to client application |
| * ----------------------------------------------------------- |
| */ |
| |
| int |
| ospf_apiserver_send_msg (struct ospf_apiserver *apiserv, struct msg *msg) |
| { |
| struct msg_fifo *fifo; |
| struct msg *msg2; |
| enum event event; |
| int fd; |
| |
| switch (msg->hdr.msgtype) |
| { |
| case MSG_REPLY: |
| fifo = apiserv->out_sync_fifo; |
| fd = apiserv->fd_sync; |
| event = OSPF_APISERVER_SYNC_WRITE; |
| break; |
| case MSG_READY_NOTIFY: |
| case MSG_LSA_UPDATE_NOTIFY: |
| case MSG_LSA_DELETE_NOTIFY: |
| case MSG_NEW_IF: |
| case MSG_DEL_IF: |
| case MSG_ISM_CHANGE: |
| case MSG_NSM_CHANGE: |
| fifo = apiserv->out_async_fifo; |
| fd = apiserv->fd_async; |
| event = OSPF_APISERVER_ASYNC_WRITE; |
| break; |
| default: |
| zlog_warn ("ospf_apiserver_send_msg: Unknown message type %d", |
| msg->hdr.msgtype); |
| return -1; |
| } |
| |
| /* Make a copy of the message and put in the fifo. Once the fifo |
| gets drained by the write thread, the message will be freed. */ |
| /* NB: Given "msg" is untouched in this function. */ |
| msg2 = msg_dup (msg); |
| |
| /* Enqueue message into corresponding fifo queue */ |
| msg_fifo_push (fifo, msg2); |
| |
| /* Schedule write thread */ |
| ospf_apiserver_event (event, fd, apiserv); |
| return 0; |
| } |
| |
| int |
| ospf_apiserver_send_reply (struct ospf_apiserver *apiserv, u_int32_t seqnr, |
| u_char rc) |
| { |
| struct msg *msg = new_msg_reply (seqnr, rc); |
| int ret; |
| |
| if (!msg) |
| { |
| zlog_warn ("ospf_apiserver_send_reply: msg_new failed"); |
| #ifdef NOTYET |
| /* Cannot allocate new message. What should we do? */ |
| ospf_apiserver_free (apiserv); |
| #endif |
| return -1; |
| } |
| |
| ret = ospf_apiserver_send_msg (apiserv, msg); |
| msg_free (msg); |
| return ret; |
| } |
| |
| |
| /* ----------------------------------------------------------- |
| * Generic message dispatching handler function |
| * ----------------------------------------------------------- |
| */ |
| |
| int |
| ospf_apiserver_handle_msg (struct ospf_apiserver *apiserv, struct msg *msg) |
| { |
| int rc; |
| |
| /* Call corresponding message handler function. */ |
| switch (msg->hdr.msgtype) |
| { |
| case MSG_REGISTER_OPAQUETYPE: |
| rc = ospf_apiserver_handle_register_opaque_type (apiserv, msg); |
| break; |
| case MSG_UNREGISTER_OPAQUETYPE: |
| rc = ospf_apiserver_handle_unregister_opaque_type (apiserv, msg); |
| break; |
| case MSG_REGISTER_EVENT: |
| rc = ospf_apiserver_handle_register_event (apiserv, msg); |
| break; |
| case MSG_SYNC_LSDB: |
| rc = ospf_apiserver_handle_sync_lsdb (apiserv, msg); |
| break; |
| case MSG_ORIGINATE_REQUEST: |
| rc = ospf_apiserver_handle_originate_request (apiserv, msg); |
| break; |
| case MSG_DELETE_REQUEST: |
| rc = ospf_apiserver_handle_delete_request (apiserv, msg); |
| break; |
| default: |
| zlog_warn ("ospf_apiserver_handle_msg: Unknown message type: %d", |
| msg->hdr.msgtype); |
| rc = -1; |
| } |
| return rc; |
| } |
| |
| |
| /* ----------------------------------------------------------- |
| * Following are functions for opaque type registration |
| * ----------------------------------------------------------- |
| */ |
| |
| int |
| ospf_apiserver_register_opaque_type (struct ospf_apiserver *apiserv, |
| u_char lsa_type, u_char opaque_type) |
| { |
| struct registered_opaque_type *regtype; |
| int (*originator_func) (void *arg); |
| int rc; |
| |
| switch (lsa_type) |
| { |
| case OSPF_OPAQUE_LINK_LSA: |
| originator_func = ospf_apiserver_lsa9_originator; |
| break; |
| case OSPF_OPAQUE_AREA_LSA: |
| originator_func = ospf_apiserver_lsa10_originator; |
| break; |
| case OSPF_OPAQUE_AS_LSA: |
| originator_func = ospf_apiserver_lsa11_originator; |
| break; |
| default: |
| zlog_warn ("ospf_apiserver_register_opaque_type: lsa_type(%d)", |
| lsa_type); |
| return OSPF_API_ILLEGALLSATYPE; |
| } |
| |
| |
| /* Register opaque function table */ |
| /* NB: Duplicated registration will be detected inside the function. */ |
| rc = |
| ospf_register_opaque_functab (lsa_type, opaque_type, |
| NULL, /* ospf_apiserver_new_if */ |
| NULL, /* ospf_apiserver_del_if */ |
| NULL, /* ospf_apiserver_ism_change */ |
| NULL, /* ospf_apiserver_nsm_change */ |
| NULL, |
| NULL, |
| NULL, |
| ospf_apiserver_show_info, |
| originator_func, |
| ospf_apiserver_lsa_refresher, |
| NULL, /* ospf_apiserver_lsa_update */ |
| NULL /* ospf_apiserver_lsa_delete */); |
| |
| if (rc != 0) |
| { |
| zlog_warn ("Failed to register opaque type [%d/%d]", |
| lsa_type, opaque_type); |
| return OSPF_API_OPAQUETYPEINUSE; |
| } |
| |
| /* Remember the opaque type that application registers so when |
| connection shuts down, we can flush all LSAs of this opaque |
| type. */ |
| |
| regtype = |
| XMALLOC (MTYPE_OSPF_APISERVER, sizeof (struct registered_opaque_type)); |
| memset (regtype, 0, sizeof (struct registered_opaque_type)); |
| regtype->lsa_type = lsa_type; |
| regtype->opaque_type = opaque_type; |
| |
| /* Add to list of registered opaque types */ |
| listnode_add (apiserv->opaque_types, regtype); |
| |
| if (IS_DEBUG_OSPF_EVENT) |
| zlog_info ("API: Add LSA-type(%d)/Opaque-type(%d) into apiserv(%p), total#(%d)", lsa_type, opaque_type, apiserv, listcount (apiserv->opaque_types)); |
| |
| return 0; |
| } |
| |
| int |
| ospf_apiserver_unregister_opaque_type (struct ospf_apiserver *apiserv, |
| u_char lsa_type, u_char opaque_type) |
| { |
| listnode node; |
| |
| for (node = listhead (apiserv->opaque_types); node; nextnode (node)) |
| { |
| struct registered_opaque_type *regtype = node->data; |
| |
| /* Check if we really registered this opaque type */ |
| if (regtype->lsa_type == lsa_type && |
| regtype->opaque_type == opaque_type) |
| { |
| |
| /* Yes, we registered this opaque type. Flush |
| all existing opaque LSAs of this type */ |
| |
| ospf_apiserver_flush_opaque_lsa (apiserv, lsa_type, opaque_type); |
| ospf_delete_opaque_functab (lsa_type, opaque_type); |
| |
| /* Remove from list of registered opaque types */ |
| listnode_delete (apiserv->opaque_types, regtype); |
| |
| if (IS_DEBUG_OSPF_EVENT) |
| zlog_info ("API: Del LSA-type(%d)/Opaque-type(%d) from apiserv(%p), total#(%d)", lsa_type, opaque_type, apiserv, listcount (apiserv->opaque_types)); |
| |
| return 0; |
| } |
| } |
| |
| /* Opaque type is not registered */ |
| zlog_warn ("Failed to unregister opaque type [%d/%d]", |
| lsa_type, opaque_type); |
| return OSPF_API_OPAQUETYPENOTREGISTERED; |
| } |
| |
| |
| int |
| apiserver_is_opaque_type_registered (struct ospf_apiserver *apiserv, |
| u_char lsa_type, u_char opaque_type) |
| { |
| listnode node; |
| |
| for (node = listhead (apiserv->opaque_types); node; nextnode (node)) |
| { |
| struct registered_opaque_type *regtype = node->data; |
| |
| /* Check if we really registered this opaque type */ |
| if (regtype->lsa_type == lsa_type && |
| regtype->opaque_type == opaque_type) |
| { |
| /* Yes registered */ |
| return 1; |
| } |
| } |
| /* Not registered */ |
| return 0; |
| } |
| |
| int |
| ospf_apiserver_handle_register_opaque_type (struct ospf_apiserver *apiserv, |
| struct msg *msg) |
| { |
| struct msg_register_opaque_type *rmsg; |
| u_char lsa_type; |
| u_char opaque_type; |
| int rc = 0; |
| |
| /* Extract parameters from register opaque type message */ |
| rmsg = (struct msg_register_opaque_type *) STREAM_DATA (msg->s); |
| |
| lsa_type = rmsg->lsatype; |
| opaque_type = rmsg->opaquetype; |
| |
| rc = ospf_apiserver_register_opaque_type (apiserv, lsa_type, opaque_type); |
| |
| /* Send a reply back to client including return code */ |
| rc = ospf_apiserver_send_reply (apiserv, ntohl (msg->hdr.msgseq), rc); |
| if (rc < 0) |
| goto out; |
| |
| /* Now inform application about opaque types that are ready */ |
| switch (lsa_type) |
| { |
| case OSPF_OPAQUE_LINK_LSA: |
| ospf_apiserver_notify_ready_type9 (apiserv); |
| break; |
| case OSPF_OPAQUE_AREA_LSA: |
| ospf_apiserver_notify_ready_type10 (apiserv); |
| break; |
| case OSPF_OPAQUE_AS_LSA: |
| ospf_apiserver_notify_ready_type11 (apiserv); |
| break; |
| } |
| out: |
| return rc; |
| } |
| |
| |
| /* Notify specific client about all opaque types 9 that are ready. */ |
| void |
| ospf_apiserver_notify_ready_type9 (struct ospf_apiserver *apiserv) |
| { |
| listnode node; |
| listnode n2; |
| |
| for (node = listhead (ospf_top->oiflist); node; nextnode (node)) |
| { |
| struct ospf_interface *oi = (struct ospf_interface *) getdata (node); |
| |
| /* Check if this interface is indeed ready for type 9 */ |
| if (!ospf_apiserver_is_ready_type9 (oi)) |
| continue; |
| |
| /* Check for registered opaque type 9 types */ |
| for (n2 = listhead (apiserv->opaque_types); n2; nextnode (n2)) |
| { |
| struct registered_opaque_type *r = |
| (struct registered_opaque_type *) getdata (n2); |
| struct msg *msg; |
| |
| if (r->lsa_type == OSPF_OPAQUE_LINK_LSA) |
| { |
| |
| /* Yes, this opaque type is ready */ |
| msg = new_msg_ready_notify (0, OSPF_OPAQUE_LINK_LSA, |
| r->opaque_type, |
| oi->address->u.prefix4); |
| if (!msg) |
| { |
| zlog_warn ("apiserver_notify_ready_type9: msg_new failed"); |
| #ifdef NOTYET |
| /* Cannot allocate new message. What should we do? */ |
| ospf_apiserver_free (apiserv); |
| #endif |
| goto out; |
| } |
| ospf_apiserver_send_msg (apiserv, msg); |
| msg_free (msg); |
| } |
| } |
| } |
| |
| out: |
| return; |
| } |
| |
| |
| /* Notify specific client about all opaque types 10 that are ready. */ |
| void |
| ospf_apiserver_notify_ready_type10 (struct ospf_apiserver *apiserv) |
| { |
| listnode node; |
| listnode n2; |
| |
| for (node = listhead (ospf_top->areas); node; nextnode (node)) |
| { |
| struct ospf_area *area = getdata (node); |
| |
| if (!ospf_apiserver_is_ready_type10 (area)) |
| { |
| continue; |
| } |
| |
| /* Check for registered opaque type 10 types */ |
| for (n2 = listhead (apiserv->opaque_types); n2; nextnode (n2)) |
| { |
| struct registered_opaque_type *r = |
| (struct registered_opaque_type *) getdata (n2); |
| struct msg *msg; |
| |
| if (r->lsa_type == OSPF_OPAQUE_AREA_LSA) |
| { |
| /* Yes, this opaque type is ready */ |
| msg = |
| new_msg_ready_notify (0, OSPF_OPAQUE_AREA_LSA, |
| r->opaque_type, area->area_id); |
| if (!msg) |
| { |
| zlog_warn ("apiserver_notify_ready_type10: msg_new failed"); |
| #ifdef NOTYET |
| /* Cannot allocate new message. What should we do? */ |
| ospf_apiserver_free (apiserv); |
| #endif |
| goto out; |
| } |
| ospf_apiserver_send_msg (apiserv, msg); |
| msg_free (msg); |
| } |
| } |
| } |
| |
| out: |
| return; |
| } |
| |
| /* Notify specific client about all opaque types 11 that are ready */ |
| void |
| ospf_apiserver_notify_ready_type11 (struct ospf_apiserver *apiserv) |
| { |
| listnode n2; |
| |
| /* Can type 11 be originated? */ |
| if (!ospf_apiserver_is_ready_type11 (ospf_top)) |
| goto out;; |
| |
| /* Check for registered opaque type 11 types */ |
| for (n2 = listhead (apiserv->opaque_types); n2; nextnode (n2)) |
| { |
| struct registered_opaque_type *r = |
| (struct registered_opaque_type *) getdata (n2); |
| struct msg *msg; |
| struct in_addr noarea_id = { 0L }; |
| |
| if (r->lsa_type == OSPF_OPAQUE_AS_LSA) |
| { |
| /* Yes, this opaque type is ready */ |
| msg = new_msg_ready_notify (0, OSPF_OPAQUE_AS_LSA, |
| r->opaque_type, noarea_id); |
| |
| if (!msg) |
| { |
| zlog_warn ("apiserver_notify_ready_type11: msg_new failed"); |
| #ifdef NOTYET |
| /* Cannot allocate new message. What should we do? */ |
| ospf_apiserver_free (apiserv); |
| #endif |
| goto out; |
| } |
| ospf_apiserver_send_msg (apiserv, msg); |
| msg_free (msg); |
| } |
| } |
| |
| out: |
| return; |
| } |
| |
| int |
| ospf_apiserver_handle_unregister_opaque_type (struct ospf_apiserver *apiserv, |
| struct msg *msg) |
| { |
| struct msg_unregister_opaque_type *umsg; |
| u_char ltype; |
| u_char otype; |
| int rc = 0; |
| |
| /* Extract parameters from unregister opaque type message */ |
| umsg = (struct msg_unregister_opaque_type *) STREAM_DATA (msg->s); |
| |
| ltype = umsg->lsatype; |
| otype = umsg->opaquetype; |
| |
| rc = ospf_apiserver_unregister_opaque_type (apiserv, ltype, otype); |
| |
| /* Send a reply back to client including return code */ |
| rc = ospf_apiserver_send_reply (apiserv, ntohl (msg->hdr.msgseq), rc); |
| |
| return rc; |
| } |
| |
| |
| /* ----------------------------------------------------------- |
| * Following are functions for event (filter) registration. |
| * ----------------------------------------------------------- |
| */ |
| int |
| ospf_apiserver_handle_register_event (struct ospf_apiserver *apiserv, |
| struct msg *msg) |
| { |
| struct msg_register_event *rmsg; |
| int rc; |
| u_int32_t seqnum; |
| |
| rmsg = (struct msg_register_event *) STREAM_DATA (msg->s); |
| |
| /* Get request sequence number */ |
| seqnum = msg_get_seq (msg); |
| |
| /* Free existing filter in apiserv. */ |
| XFREE (MTYPE_OSPF_APISERVER_MSGFILTER, apiserv->filter); |
| /* Alloc new space for filter. */ |
| |
| apiserv->filter = XMALLOC (MTYPE_OSPF_APISERVER_MSGFILTER, |
| ntohs (msg->hdr.msglen)); |
| if (apiserv->filter) |
| { |
| /* copy it over. */ |
| memcpy (apiserv->filter, &rmsg->filter, ntohs (msg->hdr.msglen)); |
| rc = OSPF_API_OK; |
| } |
| else |
| { |
| rc = OSPF_API_NOMEMORY; |
| } |
| /* Send a reply back to client with return code */ |
| rc = ospf_apiserver_send_reply (apiserv, seqnum, rc); |
| return rc; |
| } |
| |
| |
| /* ----------------------------------------------------------- |
| * Followings are functions for LSDB synchronization. |
| * ----------------------------------------------------------- |
| */ |
| |
| int |
| apiserver_sync_callback (struct ospf_lsa *lsa, void *p_arg, int int_arg) |
| { |
| struct ospf_apiserver *apiserv; |
| int seqnum; |
| struct msg *msg; |
| struct param_t |
| { |
| struct ospf_apiserver *apiserv; |
| struct lsa_filter_type *filter; |
| } |
| *param; |
| int rc = -1; |
| |
| /* Sanity check */ |
| assert (lsa->data); |
| assert (p_arg); |
| |
| param = (struct param_t *) p_arg; |
| apiserv = param->apiserv; |
| seqnum = (u_int32_t) int_arg; |
| |
| /* Check origin in filter. */ |
| if ((param->filter->origin == ANY_ORIGIN) || |
| (param->filter->origin == (lsa->flags & OSPF_LSA_SELF))) |
| { |
| |
| /* Default area for AS-External and Opaque11 LSAs */ |
| struct in_addr area_id = { 0L }; |
| |
| /* Default interface for non Opaque9 LSAs */ |
| struct in_addr ifaddr = { 0L }; |
| |
| if (lsa->area) |
| { |
| area_id = lsa->area->area_id; |
| } |
| if (lsa->data->type == OSPF_OPAQUE_LINK_LSA) |
| { |
| ifaddr = lsa->oi->address->u.prefix4; |
| } |
| |
| msg = new_msg_lsa_change_notify (MSG_LSA_UPDATE_NOTIFY, |
| seqnum, |
| ifaddr, area_id, |
| lsa->flags & OSPF_LSA_SELF, lsa->data); |
| if (!msg) |
| { |
| zlog_warn ("apiserver_sync_callback: new_msg_update failed"); |
| #ifdef NOTYET |
| /* Cannot allocate new message. What should we do? */ |
| /* ospf_apiserver_free (apiserv);*//* Do nothing here XXX */ |
| #endif |
| goto out; |
| } |
| |
| /* Send LSA */ |
| ospf_apiserver_send_msg (apiserv, msg); |
| msg_free (msg); |
| } |
| rc = 0; |
| |
| out: |
| return rc; |
| } |
| |
| int |
| ospf_apiserver_handle_sync_lsdb (struct ospf_apiserver *apiserv, |
| struct msg *msg) |
| { |
| listnode node; |
| u_int32_t seqnum; |
| int rc = 0; |
| struct msg_sync_lsdb *smsg; |
| struct param_t |
| { |
| struct ospf_apiserver *apiserv; |
| struct lsa_filter_type *filter; |
| } |
| param; |
| u_int16_t mask; |
| |
| /* Get request sequence number */ |
| seqnum = msg_get_seq (msg); |
| /* Set sync msg. */ |
| smsg = (struct msg_sync_lsdb *) STREAM_DATA (msg->s); |
| |
| /* Set parameter struct. */ |
| param.apiserv = apiserv; |
| param.filter = &smsg->filter; |
| |
| /* Remember mask. */ |
| mask = ntohs (smsg->filter.typemask); |
| |
| /* Iterate over all areas. */ |
| for (node = listhead (ospf_top->areas); node; nextnode (node)) |
| { |
| struct ospf_area *area = node->data; |
| int i; |
| u_int32_t *area_id = NULL; |
| /* Compare area_id with area_ids in sync request. */ |
| if ((i = smsg->filter.num_areas) > 0) |
| { |
| /* Let area_id point to the list of area IDs, |
| * which is at the end of smsg->filter. */ |
| area_id = (u_int32_t *) (&smsg->filter + 1); |
| while (i) |
| { |
| if (*area_id == area->area_id.s_addr) |
| { |
| break; |
| } |
| i--; |
| area_id++; |
| } |
| } |
| else |
| { |
| i = 1; |
| } |
| |
| /* If area was found, then i>0 here. */ |
| if (i) |
| { |
| /* Check msg type. */ |
| if (mask & Power2[OSPF_ROUTER_LSA]) |
| foreach_lsa (ROUTER_LSDB (area), (void *) ¶m, seqnum, |
| apiserver_sync_callback); |
| if (mask & Power2[OSPF_NETWORK_LSA]) |
| foreach_lsa (NETWORK_LSDB (area), (void *) ¶m, seqnum, |
| apiserver_sync_callback); |
| if (mask & Power2[OSPF_SUMMARY_LSA]) |
| foreach_lsa (SUMMARY_LSDB (area), (void *) ¶m, seqnum, |
| apiserver_sync_callback); |
| if (mask & Power2[OSPF_ASBR_SUMMARY_LSA]) |
| foreach_lsa (ASBR_SUMMARY_LSDB (area), (void *) ¶m, seqnum, |
| apiserver_sync_callback); |
| if (mask & Power2[OSPF_OPAQUE_LINK_LSA]) |
| foreach_lsa (OPAQUE_LINK_LSDB (area), (void *) ¶m, |
| seqnum, apiserver_sync_callback); |
| if (mask & Power2[OSPF_OPAQUE_AREA_LSA]) |
| foreach_lsa (OPAQUE_AREA_LSDB (area), (void *) ¶m, |
| seqnum, apiserver_sync_callback); |
| } |
| } |
| |
| /* For AS-external LSAs */ |
| if (ospf_top->lsdb) |
| { |
| if (mask & Power2[OSPF_AS_EXTERNAL_LSA]) |
| foreach_lsa (EXTERNAL_LSDB (ospf_top), (void *) ¶m, seqnum, |
| apiserver_sync_callback); |
| } |
| |
| /* For AS-external opaque LSAs */ |
| if (ospf_top->lsdb) |
| { |
| if (mask & Power2[OSPF_OPAQUE_AS_LSA]) |
| foreach_lsa (OPAQUE_AS_LSDB (ospf_top), (void *) ¶m, |
| seqnum, apiserver_sync_callback); |
| } |
| |
| /* Send a reply back to client with return code */ |
| rc = ospf_apiserver_send_reply (apiserv, seqnum, rc); |
| return rc; |
| } |
| |
| |
| /* ----------------------------------------------------------- |
| * Followings are functions to originate or update LSA |
| * from an application. |
| * ----------------------------------------------------------- |
| */ |
| |
| /* Create a new internal opaque LSA by taking prototype and filling in |
| missing fields such as age, sequence number, advertising router, |
| checksum and so on. The interface parameter is used for type 9 |
| LSAs, area parameter for type 10. Type 11 LSAs do neither need area |
| nor interface. */ |
| |
| struct ospf_lsa * |
| ospf_apiserver_opaque_lsa_new (struct ospf_area *area, |
| struct ospf_interface *oi, |
| struct lsa_header *protolsa) |
| { |
| struct stream *s; |
| struct lsa_header *newlsa; |
| struct ospf_lsa *new = NULL; |
| u_char options = 0x0; |
| u_int16_t length; |
| |
| /* Create a stream for internal opaque LSA */ |
| if ((s = stream_new (OSPF_MAX_LSA_SIZE)) == NULL) |
| { |
| zlog_warn ("ospf_apiserver_opaque_lsa_new: stream_new failed"); |
| return NULL; |
| } |
| |
| newlsa = (struct lsa_header *) STREAM_DATA (s); |
| |
| /* XXX If this is a link-local LSA or an AS-external LSA, how do we |
| have to set options? */ |
| |
| if (area) |
| { |
| options = LSA_OPTIONS_GET (area); |
| #ifdef HAVE_NSSA |
| options |= LSA_NSSA_GET (area); |
| #endif /* HAVE_NSSA */ |
| } |
| |
| options |= OSPF_OPTION_O; /* Don't forget to set option bit */ |
| |
| if (IS_DEBUG_OSPF (lsa, LSA_GENERATE)) |
| { |
| zlog_info ("LSA[Type%d:%s]: Creating an Opaque-LSA instance", |
| protolsa->type, inet_ntoa (protolsa->id)); |
| } |
| |
| /* Set opaque-LSA header fields. */ |
| lsa_header_set (s, options, protolsa->type, protolsa->id, |
| area->ospf->router_id); |
| |
| /* Set opaque-LSA body fields. */ |
| stream_put (s, ((u_char *) protolsa) + sizeof (struct lsa_header), |
| ntohs (protolsa->length) - sizeof (struct lsa_header)); |
| |
| /* Determine length of LSA. */ |
| length = stream_get_endp (s); |
| newlsa->length = htons (length); |
| |
| /* Create OSPF LSA. */ |
| if ((new = ospf_lsa_new ()) == NULL) |
| { |
| zlog_warn ("ospf_apiserver_opaque_lsa_new: ospf_lsa_new() ?"); |
| stream_free (s); |
| return NULL; |
| } |
| |
| if ((new->data = ospf_lsa_data_new (length)) == NULL) |
| { |
| zlog_warn ("ospf_apiserver_opaque_lsa_new: ospf_lsa_data_new() ?"); |
| ospf_lsa_free (new); |
| new = NULL; |
| stream_free (s); |
| return NULL; |
| } |
| |
| new->area = area; |
| new->oi = oi; |
| |
| SET_FLAG (new->flags, OSPF_LSA_SELF); |
| memcpy (new->data, newlsa, length); |
| stream_free (s); |
| |
| return new; |
| } |
| |
| |
| int |
| ospf_apiserver_is_ready_type9 (struct ospf_interface *oi) |
| { |
| /* Type 9 opaque LSA can be originated if there is at least one |
| active opaque-capable neighbor attached to the outgoing |
| interface. */ |
| |
| return (ospf_opaque_capable_nbr_count (oi->nbrs, NSM_Full) > 0); |
| } |
| |
| int |
| ospf_apiserver_is_ready_type10 (struct ospf_area *area) |
| { |
| /* Type 10 opaque LSA can be originated if there is at least one |
| interface belonging to the area that has an active opaque-capable |
| neighbor. */ |
| listnode node; |
| |
| for (node = listhead (area->oiflist); node; nextnode (node)) |
| { |
| struct ospf_interface *oi = getdata (node); |
| |
| /* Is there an active neighbor attached to this interface? */ |
| if (ospf_apiserver_is_ready_type9 (oi)) |
| { |
| return 1; |
| } |
| } |
| /* No active neighbor in area */ |
| return 0; |
| } |
| |
| int |
| ospf_apiserver_is_ready_type11 (struct ospf *ospf) |
| { |
| /* Type 11 opaque LSA can be originated if there is at least one interface |
| that has an active opaque-capable neighbor. */ |
| listnode node; |
| |
| for (node = listhead (ospf->oiflist); node; nextnode (node)) |
| { |
| struct ospf_interface *oi = getdata (node); |
| |
| /* Is there an active neighbor attached to this interface? */ |
| if (ospf_apiserver_is_ready_type9 (oi)) |
| return 1; |
| } |
| /* No active neighbor at all */ |
| return 0; |
| } |
| |
| |
| int |
| ospf_apiserver_handle_originate_request (struct ospf_apiserver *apiserv, |
| struct msg *msg) |
| { |
| struct msg_originate_request *omsg; |
| struct lsa_header *data; |
| struct ospf_lsa *new; |
| struct ospf_lsa *old; |
| struct ospf_area *area = NULL; |
| struct ospf_interface *oi = NULL; |
| struct ospf_lsdb *lsdb = NULL; |
| int lsa_type, opaque_type; |
| int ready = 0; |
| int rc = 0; |
| |
| /* Extract opaque LSA data from message */ |
| omsg = (struct msg_originate_request *) STREAM_DATA (msg->s); |
| data = &omsg->data; |
| |
| /* Determine interface for type9 or area for type10 LSAs. */ |
| switch (data->type) |
| { |
| case OSPF_OPAQUE_LINK_LSA: |
| oi = ospf_apiserver_if_lookup_by_addr (omsg->ifaddr); |
| if (!oi) |
| { |
| zlog_warn ("apiserver_originate: unknown interface %s", |
| inet_ntoa (omsg->ifaddr)); |
| rc = OSPF_API_NOSUCHINTERFACE; |
| goto out; |
| } |
| area = oi->area; |
| lsdb = area->lsdb; |
| break; |
| case OSPF_OPAQUE_AREA_LSA: |
| area = ospf_area_lookup_by_area_id (omsg->area_id); |
| if (!area) |
| { |
| zlog_warn ("apiserver_originate: unknown area %s", |
| inet_ntoa (omsg->area_id)); |
| rc = OSPF_API_NOSUCHAREA; |
| goto out; |
| } |
| lsdb = area->lsdb; |
| break; |
| case OSPF_OPAQUE_AS_LSA: |
| lsdb = ospf_top->lsdb; |
| break; |
| default: |
| /* We can only handle opaque types here */ |
| zlog_warn ("apiserver_originate: Cannot originate non-opaque LSA type %d", |
| data->type); |
| rc = OSPF_API_ILLEGALLSATYPE; |
| goto out; |
| } |
| |
| /* Check if we registered this opaque type */ |
| lsa_type = data->type; |
| opaque_type = GET_OPAQUE_TYPE (ntohl (data->id.s_addr)); |
| |
| if (!apiserver_is_opaque_type_registered (apiserv, lsa_type, opaque_type)) |
| { |
| zlog_warn ("apiserver_originate: LSA-type(%d)/Opaque-type(%d): Not registered", lsa_type, opaque_type); |
| rc = OSPF_API_OPAQUETYPENOTREGISTERED; |
| goto out; |
| } |
| |
| /* Make sure that the neighbors are ready before we can originate */ |
| switch (data->type) |
| { |
| case OSPF_OPAQUE_LINK_LSA: |
| ready = ospf_apiserver_is_ready_type9 (oi); |
| break; |
| case OSPF_OPAQUE_AREA_LSA: |
| ready = ospf_apiserver_is_ready_type10 (area); |
| break; |
| case OSPF_OPAQUE_AS_LSA: |
| ready = ospf_apiserver_is_ready_type11 (ospf_top); |
| break; |
| default: |
| break; |
| } |
| |
| if (!ready) |
| { |
| zlog_warn ("Neighbors not ready to originate type %d", data->type); |
| rc = OSPF_API_NOTREADY; |
| goto out; |
| } |
| |
| /* Create OSPF's internal opaque LSA representation */ |
| new = ospf_apiserver_opaque_lsa_new (area, oi, data); |
| if (!new) |
| { |
| rc = OSPF_API_NOMEMORY; /* XXX */ |
| goto out; |
| } |
| |
| /* Determine if LSA is new or an update for an existing one. */ |
| old = ospf_lsdb_lookup (lsdb, new); |
| |
| if (!old) |
| { |
| /* New LSA install in LSDB. */ |
| rc = ospf_apiserver_originate1 (new); |
| } |
| else |
| { |
| /* |
| * Keep the new LSA instance in the "waiting place" until the next |
| * refresh timing. If several LSA update requests for the same LSID |
| * have issued by peer, the last one takes effect. |
| */ |
| new->lsdb = &apiserv->reserve; |
| ospf_lsdb_add (&apiserv->reserve, new); |
| |
| /* Kick the scheduler function. */ |
| ospf_opaque_lsa_refresh_schedule (old); |
| } |
| |
| out: |
| |
| /* Send a reply back to client with return code */ |
| rc = ospf_apiserver_send_reply (apiserv, ntohl (msg->hdr.msgseq), rc); |
| return rc; |
| } |
| |
| |
| /* ----------------------------------------------------------- |
| * Flood an LSA within its flooding scope. |
| * ----------------------------------------------------------- |
| */ |
| |
| /* XXX We can probably use ospf_flood_through instead of this function |
| but then we need the neighbor parameter. If we set nbr to |
| NULL then ospf_flood_through crashes due to dereferencing NULL. */ |
| |
| void |
| ospf_apiserver_flood_opaque_lsa (struct ospf_lsa *lsa) |
| { |
| assert (lsa); |
| |
| switch (lsa->data->type) |
| { |
| case OSPF_OPAQUE_LINK_LSA: |
| /* Increment counters? XXX */ |
| |
| /* Flood LSA through local network. */ |
| ospf_flood_through_area (lsa->area, NULL /*nbr */ , lsa); |
| break; |
| case OSPF_OPAQUE_AREA_LSA: |
| /* Update LSA origination count. */ |
| assert (lsa->area); |
| lsa->area->top->lsa_originate_count++; |
| |
| /* Flood LSA through area. */ |
| ospf_flood_through_area (lsa->area, NULL /*nbr */ , lsa); |
| break; |
| case OSPF_OPAQUE_AS_LSA: |
| /* Increment counters? XXX */ |
| |
| /* Flood LSA through AS. */ |
| ospf_flood_through_as (NULL /*nbr */ , lsa); |
| break; |
| } |
| } |
| |
| int |
| ospf_apiserver_originate1 (struct ospf_lsa *lsa) |
| { |
| /* Install this LSA into LSDB. */ |
| if (ospf_lsa_install (lsa->oi, lsa) == NULL) |
| { |
| zlog_warn ("ospf_apiserver_originate1: ospf_lsa_install failed"); |
| return -1; |
| } |
| |
| /* Flood LSA within scope */ |
| |
| #ifdef NOTYET |
| /* |
| * NB: Modified version of "ospf_flood_though ()" accepts NULL "inbr" |
| * parameter, and thus it does not cause SIGSEGV error. |
| */ |
| ospf_flood_through (NULL /*nbr */ , lsa); |
| #else /* NOTYET */ |
| |
| ospf_apiserver_flood_opaque_lsa (lsa); |
| #endif /* NOTYET */ |
| |
| return 0; |
| } |
| |
| |
| /* Opaque LSAs of type 9 on a specific interface can now be |
| originated. Tell clients that registered type 9. */ |
| int |
| ospf_apiserver_lsa9_originator (void *arg) |
| { |
| struct ospf_interface *oi; |
| |
| oi = (struct ospf_interface *) arg; |
| if (listcount (apiserver_list) > 0) { |
| ospf_apiserver_clients_notify_ready_type9 (oi); |
| } |
| return 0; |
| } |
| |
| int |
| ospf_apiserver_lsa10_originator (void *arg) |
| { |
| struct ospf_area *area; |
| |
| area = (struct ospf_area *) arg; |
| if (listcount (apiserver_list) > 0) { |
| ospf_apiserver_clients_notify_ready_type10 (area); |
| } |
| return 0; |
| } |
| |
| int |
| ospf_apiserver_lsa11_originator (void *arg) |
| { |
| struct ospf *ospf; |
| |
| ospf = (struct ospf *) arg; |
| if (listcount (apiserver_list) > 0) { |
| ospf_apiserver_clients_notify_ready_type11 (ospf); |
| } |
| return 0; |
| } |
| |
| |
| /* Periodically refresh opaque LSAs so that they do not expire in |
| other routers. */ |
| void |
| ospf_apiserver_lsa_refresher (struct ospf_lsa *lsa) |
| { |
| struct ospf_apiserver *apiserv; |
| struct ospf_lsa *new = NULL; |
| |
| apiserv = lookup_apiserver_by_lsa (lsa); |
| if (!apiserv) |
| { |
| zlog_warn ("ospf_apiserver_lsa_refresher: LSA[%s]: No apiserver?", dump_lsa_key (lsa)); |
| lsa->data->ls_age = htons (OSPF_LSA_MAXAGE); /* Flush it anyway. */ |
| } |
| |
| if (IS_LSA_MAXAGE (lsa)) |
| { |
| ospf_opaque_lsa_flush_schedule (lsa); |
| goto out; |
| } |
| |
| /* Check if updated version of LSA instance has already prepared. */ |
| new = ospf_lsdb_lookup (&apiserv->reserve, lsa); |
| if (!new) |
| { |
| /* This is a periodic refresh, driven by core OSPF mechanism. */ |
| new = ospf_apiserver_opaque_lsa_new (lsa->area, lsa->oi, lsa->data); |
| if (!new) |
| { |
| zlog_warn ("ospf_apiserver_lsa_refresher: Cannot create a new LSA?"); |
| goto out; |
| } |
| } |
| else |
| { |
| /* This is a forcible refresh, requested by OSPF-API client. */ |
| ospf_lsdb_delete (&apiserv->reserve, new); |
| new->lsdb = NULL; |
| } |
| |
| /* Increment sequence number */ |
| new->data->ls_seqnum = lsa_seqnum_increment (lsa); |
| |
| /* New LSA is in same area. */ |
| new->area = lsa->area; |
| SET_FLAG (new->flags, OSPF_LSA_SELF); |
| |
| /* Install LSA into LSDB. */ |
| if (ospf_lsa_install (new->oi, new) == NULL) |
| { |
| zlog_warn ("ospf_apiserver_lsa_refresher: ospf_lsa_install failed"); |
| ospf_lsa_free (new); |
| goto out; |
| } |
| |
| /* Flood updated LSA through interface, area or AS */ |
| |
| #ifdef NOTYET |
| ospf_flood_through (NULL /*nbr */ , new); |
| #endif /* NOTYET */ |
| ospf_apiserver_flood_opaque_lsa (new); |
| |
| /* Debug logging. */ |
| if (IS_DEBUG_OSPF (lsa, LSA_GENERATE)) |
| { |
| zlog_info ("LSA[Type%d:%s]: Refresh Opaque LSA", |
| new->data->type, inet_ntoa (new->data->id)); |
| ospf_lsa_header_dump (new->data); |
| } |
| |
| out: |
| return; |
| } |
| |
| |
| /* ----------------------------------------------------------- |
| * Followings are functions to delete LSAs |
| * ----------------------------------------------------------- |
| */ |
| |
| int |
| ospf_apiserver_handle_delete_request (struct ospf_apiserver *apiserv, |
| struct msg *msg) |
| { |
| struct msg_delete_request *dmsg; |
| struct ospf_lsa *old; |
| struct ospf_area *area = NULL; |
| struct in_addr id; |
| int lsa_type, opaque_type; |
| int rc = 0; |
| |
| /* Extract opaque LSA from message */ |
| dmsg = (struct msg_delete_request *) STREAM_DATA (msg->s); |
| |
| /* Lookup area for link-local and area-local opaque LSAs */ |
| switch (dmsg->lsa_type) |
| { |
| case OSPF_OPAQUE_LINK_LSA: |
| case OSPF_OPAQUE_AREA_LSA: |
| area = ospf_area_lookup_by_area_id (dmsg->area_id); |
| if (!area) |
| { |
| zlog_warn ("ospf_apiserver_lsa_delete: unknown area %s", |
| inet_ntoa (dmsg->area_id)); |
| rc = OSPF_API_NOSUCHAREA; |
| goto out; |
| } |
| break; |
| case OSPF_OPAQUE_AS_LSA: |
| /* AS-external opaque LSAs have no designated area */ |
| area = NULL; |
| break; |
| default: |
| zlog_warn |
| ("ospf_apiserver_lsa_delete: Cannot delete non-opaque LSA type %d", |
| dmsg->lsa_type); |
| rc = OSPF_API_ILLEGALLSATYPE; |
| goto out; |
| } |
| |
| /* Check if we registered this opaque type */ |
| lsa_type = dmsg->lsa_type; |
| opaque_type = dmsg->opaque_type; |
| |
| if (!apiserver_is_opaque_type_registered (apiserv, lsa_type, opaque_type)) |
| { |
| zlog_warn ("ospf_apiserver_lsa_delete: LSA-type(%d)/Opaque-type(%d): Not registered", lsa_type, opaque_type); |
| rc = OSPF_API_OPAQUETYPENOTREGISTERED; |
| goto out; |
| } |
| |
| /* opaque_id is in network byte order */ |
| id.s_addr = htonl (SET_OPAQUE_LSID (dmsg->opaque_type, |
| ntohl (dmsg->opaque_id))); |
| |
| /* |
| * Even if the target LSA has once scheduled to flush, it remains in |
| * the LSDB until it is finally handled by the maxage remover thread. |
| * Therefore, the lookup function below may return non-NULL result. |
| */ |
| old = ospf_lsa_lookup (area, dmsg->lsa_type, id, ospf_top->router_id); |
| if (!old) |
| { |
| zlog_warn ("ospf_apiserver_lsa_delete: LSA[Type%d:%s] not in LSDB", |
| dmsg->lsa_type, inet_ntoa (id)); |
| rc = OSPF_API_NOSUCHLSA; |
| goto out; |
| } |
| |
| /* Schedule flushing of LSA from LSDB */ |
| /* NB: Multiple scheduling will produce a warning message, but harmless. */ |
| ospf_opaque_lsa_flush_schedule (old); |
| |
| out: |
| |
| /* Send reply back to client including return code */ |
| rc = ospf_apiserver_send_reply (apiserv, ntohl (msg->hdr.msgseq), rc); |
| return rc; |
| } |
| |
| /* Flush self-originated opaque LSA */ |
| int |
| apiserver_flush_opaque_type_callback (struct ospf_lsa *lsa, |
| void *p_arg, int int_arg) |
| { |
| struct param_t |
| { |
| struct ospf_apiserver *apiserv; |
| u_char lsa_type; |
| u_char opaque_type; |
| } |
| *param; |
| |
| /* Sanity check */ |
| assert (lsa->data); |
| assert (p_arg); |
| param = (struct param_t *) p_arg; |
| |
| /* If LSA matches type and opaque type then delete it */ |
| if (IS_LSA_SELF (lsa) && lsa->data->type == param->lsa_type |
| && GET_OPAQUE_TYPE (ntohl (lsa->data->id.s_addr)) == param->opaque_type) |
| { |
| ospf_opaque_lsa_flush_schedule (lsa); |
| } |
| return 0; |
| } |
| |
| /* Delete self-originated opaque LSAs of a given opaque type. This |
| function is called when an application unregisters a given opaque |
| type or a connection to an application closes and all those opaque |
| LSAs need to be flushed the LSDB. */ |
| void |
| ospf_apiserver_flush_opaque_lsa (struct ospf_apiserver *apiserv, |
| u_char lsa_type, u_char opaque_type) |
| { |
| struct param_t |
| { |
| struct ospf_apiserver *apiserv; |
| u_char lsa_type; |
| u_char opaque_type; |
| } |
| param; |
| listnode node; |
| |
| /* Set parameter struct. */ |
| param.apiserv = apiserv; |
| param.lsa_type = lsa_type; |
| param.opaque_type = opaque_type; |
| |
| #ifdef ORIGINAL_CODING |
| /* Iterate over all areas */ |
| for (node = listhead (ospf_top->areas); node; nextnode (node)) |
| { |
| struct ospf_area *area = node->data; |
| |
| foreach_lsa (OPAQUE_LINK_LSDB (area), (void *) ¶m, 0, |
| apiserver_flush_opaque_type_callback); |
| foreach_lsa (OPAQUE_AREA_LSDB (area), (void *) ¶m, 0, |
| apiserver_flush_opaque_type_callback); |
| } |
| |
| /* For AS-external opaque LSAs */ |
| if (ospf_top->lsdb) |
| { |
| foreach_lsa (OPAQUE_AS_LSDB (ospf_top), (void *) ¶m, 0, |
| apiserver_flush_opaque_type_callback); |
| } |
| #else /* ORIGINAL_CODING */ |
| switch (lsa_type) |
| { |
| case OSPF_OPAQUE_LINK_LSA: |
| for (node = listhead (ospf_top->areas); node; nextnode (node)) |
| { |
| struct ospf_area *area = node->data; |
| foreach_lsa (OPAQUE_LINK_LSDB (area), (void *) ¶m, 0, |
| apiserver_flush_opaque_type_callback); |
| } |
| break; |
| case OSPF_OPAQUE_AREA_LSA: |
| for (node = listhead (ospf_top->areas); node; nextnode (node)) |
| { |
| struct ospf_area *area = node->data; |
| foreach_lsa (OPAQUE_AREA_LSDB (area), (void *) ¶m, 0, |
| apiserver_flush_opaque_type_callback); |
| } |
| break; |
| case OSPF_OPAQUE_AS_LSA: |
| foreach_lsa (OPAQUE_AS_LSDB (ospf_top), (void *) ¶m, 0, |
| apiserver_flush_opaque_type_callback); |
| break; |
| default: |
| break; |
| } |
| return; |
| #endif /* ORIGINAL_CODING */ |
| } |
| |
| |
| /* ----------------------------------------------------------- |
| * Followings are callback functions to handle opaque types |
| * ----------------------------------------------------------- |
| */ |
| |
| int |
| ospf_apiserver_new_if (struct interface *ifp) |
| { |
| struct ospf_interface *oi; |
| |
| /* For some strange reason it seems possible that we are invoked |
| with an interface that has no name. This seems to happen during |
| initialization. Return if this happens */ |
| |
| if (ifp->name[0] == '\0') { |
| /* interface has empty name */ |
| zlog_warn ("ospf_apiserver_new_if: interface has no name?"); |
| return 0; |
| } |
| |
| /* zlog_warn for debugging */ |
| zlog_warn ("ospf_apiserver_new_if"); |
| zlog_warn ("ifp name=%s status=%d index=%d", ifp->name, ifp->status, |
| ifp->ifindex); |
| |
| if (ifp->name[0] == '\0') { |
| /* interface has empty name */ |
| zlog_warn ("ospf_apiserver_new_if: interface has no name?"); |
| return 0; |
| } |
| |
| oi = ospf_apiserver_if_lookup_by_ifp (ifp); |
| |
| if (!oi) { |
| /* This interface is known to Zebra but not to OSPF daemon yet. */ |
| zlog_warn ("ospf_apiserver_new_if: interface %s not known to OSPFd?", |
| ifp->name); |
| return 0; |
| } |
| |
| assert (oi); |
| |
| /* New interface added to OSPF, tell clients about it */ |
| if (listcount (apiserver_list) > 0) { |
| ospf_apiserver_clients_notify_new_if (oi); |
| } |
| return 0; |
| } |
| |
| int |
| ospf_apiserver_del_if (struct interface *ifp) |
| { |
| struct ospf_interface *oi; |
| |
| /* zlog_warn for debugging */ |
| zlog_warn ("ospf_apiserver_del_if"); |
| zlog_warn ("ifp name=%s status=%d index=%d\n", ifp->name, ifp->status, |
| ifp->ifindex); |
| |
| oi = ospf_apiserver_if_lookup_by_ifp (ifp); |
| |
| if (!oi) { |
| /* This interface is known to Zebra but not to OSPF daemon |
| anymore. No need to tell clients about it */ |
| return 0; |
| } |
| |
| /* Interface deleted, tell clients about it */ |
| if (listcount (apiserver_list) > 0) { |
| ospf_apiserver_clients_notify_del_if (oi); |
| } |
| return 0; |
| } |
| |
| void |
| ospf_apiserver_ism_change (struct ospf_interface *oi, int old_state) |
| { |
| /* Tell clients about interface change */ |
| |
| /* zlog_warn for debugging */ |
| zlog_warn ("ospf_apiserver_ism_change"); |
| if (listcount (apiserver_list) > 0) { |
| ospf_apiserver_clients_notify_ism_change (oi); |
| } |
| |
| zlog_warn ("oi->ifp->name=%s", oi->ifp->name); |
| zlog_warn ("old_state=%d", old_state); |
| zlog_warn ("oi->state=%d", oi->state); |
| } |
| |
| void |
| ospf_apiserver_nsm_change (struct ospf_neighbor *nbr, int old_status) |
| { |
| /* Neighbor status changed, tell clients about it */ |
| zlog_warn ("ospf_apiserver_nsm_change"); |
| if (listcount (apiserver_list) > 0) { |
| ospf_apiserver_clients_notify_nsm_change (nbr); |
| } |
| } |
| |
| void |
| ospf_apiserver_show_info (struct vty *vty, struct ospf_lsa *lsa) |
| { |
| struct opaque_lsa |
| { |
| struct lsa_header header; |
| u_char data[1]; /* opaque data have variable length. This is start |
| address */ |
| }; |
| struct opaque_lsa *olsa; |
| int opaquelen; |
| |
| olsa = (struct opaque_lsa *) lsa->data; |
| |
| if (VALID_OPAQUE_INFO_LEN (lsa->data)) |
| { |
| opaquelen = ntohs (lsa->data->length) - OSPF_LSA_HEADER_SIZE; |
| } |
| else |
| { |
| opaquelen = 0; |
| } |
| |
| /* Output information about opaque LSAs */ |
| if (vty != NULL) |
| { |
| int i; |
| vty_out (vty, " Added using OSPF API: %u octets of opaque data %s%s", |
| opaquelen, |
| VALID_OPAQUE_INFO_LEN (lsa->data) ? "" : "(Invalid length?)", |
| VTY_NEWLINE); |
| vty_out (vty, " Opaque data: "); |
| |
| for (i = 0; i < opaquelen; i++) |
| { |
| vty_out (vty, "0x%x ", olsa->data[i]); |
| } |
| vty_out (vty, "%s", VTY_NEWLINE); |
| } |
| else |
| { |
| int i; |
| zlog_info (" Added using OSPF API: %u octets of opaque data %s", |
| opaquelen, |
| VALID_OPAQUE_INFO_LEN (lsa-> |
| data) ? "" : "(Invalid length?)"); |
| zlog_info (" Opaque data: "); |
| |
| for (i = 0; i < opaquelen; i++) |
| { |
| zlog_info ("0x%x ", olsa->data[i]); |
| } |
| zlog_info ("\n"); |
| } |
| return; |
| } |
| |
| /* ----------------------------------------------------------- |
| * Followings are functions to notify clients about events |
| * ----------------------------------------------------------- |
| */ |
| |
| /* Send a message to all clients. This is useful for messages |
| that need to be notified to all clients (such as interface |
| changes) */ |
| |
| void |
| ospf_apiserver_clients_notify_all (struct msg *msg) |
| { |
| listnode node; |
| |
| /* Send message to all clients */ |
| for (node = listhead (apiserver_list); node; nextnode (node)) |
| { |
| struct ospf_apiserver *apiserv = |
| (struct ospf_apiserver *) getdata (node); |
| |
| ospf_apiserver_send_msg (apiserv, msg); |
| } |
| } |
| |
| /* An interface is now ready to accept opaque LSAs. Notify all |
| clients that registered to use this opaque type */ |
| void |
| ospf_apiserver_clients_notify_ready_type9 (struct ospf_interface *oi) |
| { |
| listnode node; |
| struct msg *msg; |
| |
| assert (oi); |
| if (!oi->address) |
| { |
| zlog_warn ("Interface has no address?"); |
| return; |
| } |
| |
| if (!ospf_apiserver_is_ready_type9 (oi)) |
| { |
| zlog_warn ("Interface not ready for type 9?"); |
| return; |
| } |
| |
| for (node = listhead (apiserver_list); node; nextnode (node)) |
| { |
| struct ospf_apiserver *apiserv = |
| (struct ospf_apiserver *) getdata (node); |
| listnode n2; |
| |
| for (n2 = listhead (apiserv->opaque_types); n2; nextnode (n2)) |
| { |
| struct registered_opaque_type *r = |
| (struct registered_opaque_type *) getdata (n2); |
| if (r->lsa_type == OSPF_OPAQUE_LINK_LSA) |
| { |
| msg = new_msg_ready_notify (0, OSPF_OPAQUE_LINK_LSA, |
| r->opaque_type, |
| oi->address->u.prefix4); |
| if (!msg) |
| { |
| zlog_warn |
| ("ospf_apiserver_clients_notify_ready_type9: new_msg_ready_notify failed"); |
| #ifdef NOTYET |
| /* Cannot allocate new message. What should we do? */ |
| ospf_apiserver_free (apiserv); |
| #endif |
| goto out; |
| } |
| |
| ospf_apiserver_send_msg (apiserv, msg); |
| msg_free (msg); |
| } |
| } |
| } |
| |
| out: |
| return; |
| } |
| |
| void |
| ospf_apiserver_clients_notify_ready_type10 (struct ospf_area *area) |
| { |
| listnode node; |
| struct msg *msg; |
| |
| assert (area); |
| |
| if (!ospf_apiserver_is_ready_type10 (area)) |
| { |
| zlog_warn ("Area not ready for type 10?"); |
| return; |
| } |
| |
| for (node = listhead (apiserver_list); node; nextnode (node)) |
| { |
| struct ospf_apiserver *apiserv = |
| (struct ospf_apiserver *) getdata (node); |
| listnode n2; |
| |
| for (n2 = listhead (apiserv->opaque_types); n2; nextnode (n2)) |
| { |
| struct registered_opaque_type *r = |
| (struct registered_opaque_type *) getdata (n2); |
| if (r->lsa_type == OSPF_OPAQUE_AREA_LSA) |
| { |
| msg = new_msg_ready_notify (0, OSPF_OPAQUE_AREA_LSA, |
| r->opaque_type, area->area_id); |
| if (!msg) |
| { |
| zlog_warn |
| ("ospf_apiserver_clients_notify_ready_type10: new_msg_ready_nofity failed"); |
| #ifdef NOTYET |
| /* Cannot allocate new message. What should we do? */ |
| ospf_apiserver_free (apiserv); |
| #endif |
| goto out; |
| } |
| |
| ospf_apiserver_send_msg (apiserv, msg); |
| msg_free (msg); |
| } |
| } |
| } |
| |
| out: |
| return; |
| } |
| |
| |
| void |
| ospf_apiserver_clients_notify_ready_type11 (struct ospf *top) |
| { |
| listnode node; |
| struct msg *msg; |
| struct in_addr id_null = { 0L }; |
| |
| assert (top); |
| |
| if (!ospf_apiserver_is_ready_type11 (top)) |
| { |
| zlog_warn ("AS not ready for type 11?"); |
| return; |
| } |
| |
| for (node = listhead (apiserver_list); node; nextnode (node)) |
| { |
| struct ospf_apiserver *apiserv = |
| (struct ospf_apiserver *) getdata (node); |
| listnode n2; |
| |
| for (n2 = listhead (apiserv->opaque_types); n2; nextnode (n2)) |
| { |
| struct registered_opaque_type *r = |
| (struct registered_opaque_type *) getdata (n2); |
| if (r->lsa_type == OSPF_OPAQUE_AS_LSA) |
| { |
| msg = new_msg_ready_notify (0, OSPF_OPAQUE_AS_LSA, |
| r->opaque_type, id_null); |
| if (!msg) |
| { |
| zlog_warn |
| ("ospf_apiserver_clients_notify_ready_type11: new_msg_ready_notify failed"); |
| #ifdef NOTYET |
| /* Cannot allocate new message. What should we do? */ |
| ospf_apiserver_free (apiserv); |
| #endif |
| goto out; |
| } |
| |
| ospf_apiserver_send_msg (apiserv, msg); |
| msg_free (msg); |
| } |
| } |
| } |
| |
| out: |
| return; |
| } |
| |
| void |
| ospf_apiserver_clients_notify_new_if (struct ospf_interface *oi) |
| { |
| struct msg *msg; |
| |
| msg = new_msg_new_if (0, oi->address->u.prefix4, oi->area->area_id); |
| if (msg != NULL) |
| { |
| ospf_apiserver_clients_notify_all (msg); |
| msg_free (msg); |
| } |
| } |
| |
| void |
| ospf_apiserver_clients_notify_del_if (struct ospf_interface *oi) |
| { |
| struct msg *msg; |
| |
| msg = new_msg_del_if (0, oi->address->u.prefix4); |
| if (msg != NULL) |
| { |
| ospf_apiserver_clients_notify_all (msg); |
| msg_free (msg); |
| } |
| } |
| |
| void |
| ospf_apiserver_clients_notify_ism_change (struct ospf_interface *oi) |
| { |
| struct msg *msg; |
| struct in_addr ifaddr = { 0L }; |
| struct in_addr area_id = { 0L }; |
| |
| assert (oi); |
| assert (oi->ifp); |
| |
| if (oi->address) |
| { |
| ifaddr = oi->address->u.prefix4; |
| } |
| if (oi->area) |
| { |
| area_id = oi->area->area_id; |
| } |
| |
| msg = new_msg_ism_change (0, ifaddr, area_id, oi->ifp->status); |
| if (!msg) |
| { |
| zlog_warn ("apiserver_clients_notify_ism_change: msg_new failed"); |
| return; |
| } |
| |
| ospf_apiserver_clients_notify_all (msg); |
| msg_free (msg); |
| } |
| |
| void |
| ospf_apiserver_clients_notify_nsm_change (struct ospf_neighbor *nbr) |
| { |
| struct msg *msg; |
| struct in_addr ifaddr = { 0L }; |
| struct in_addr nbraddr = { 0L }; |
| |
| assert (nbr); |
| |
| if (nbr->oi) |
| { |
| ifaddr = nbr->oi->address->u.prefix4; |
| } |
| |
| nbraddr = nbr->address.u.prefix4; |
| |
| msg = new_msg_nsm_change (0, ifaddr, nbraddr, nbr->router_id, nbr->state); |
| if (!msg) |
| { |
| zlog_warn ("apiserver_clients_notify_nsm_change: msg_new failed"); |
| return; |
| } |
| |
| ospf_apiserver_clients_notify_all (msg); |
| msg_free (msg); |
| } |
| |
| void |
| apiserver_clients_lsa_change_notify (u_char msgtype, struct ospf_lsa *lsa) |
| { |
| struct msg *msg; |
| listnode node; |
| |
| /* Default area for AS-External and Opaque11 LSAs */ |
| struct in_addr area_id = { 0L }; |
| |
| /* Default interface for non Opaque9 LSAs */ |
| struct in_addr ifaddr = { 0L }; |
| |
| if (lsa->area) |
| { |
| area_id = lsa->area->area_id; |
| } |
| if (lsa->data->type == OSPF_OPAQUE_LINK_LSA) |
| { |
| assert (lsa->oi); |
| ifaddr = lsa->oi->address->u.prefix4; |
| } |
| |
| /* Prepare message that can be sent to clients that have a matching |
| filter */ |
| msg = new_msg_lsa_change_notify (msgtype, 0L, /* no sequence number */ |
| ifaddr, area_id, |
| lsa->flags & OSPF_LSA_SELF, lsa->data); |
| if (!msg) |
| { |
| zlog_warn ("apiserver_clients_lsa_change_notify: msg_new failed"); |
| return; |
| } |
| |
| /* Now send message to all clients with a matching filter */ |
| for (node = listhead (apiserver_list); node; nextnode (node)) |
| { |
| struct ospf_apiserver *apiserv = (struct ospf_apiserver *) node->data; |
| struct lsa_filter_type *filter; |
| u_int16_t mask; |
| u_int32_t *area; |
| int i; |
| |
| /* Check filter for this client. */ |
| filter = apiserv->filter; |
| |
| /* Check area IDs in case of non AS-E LSAs. |
| * If filter has areas (num_areas > 0), |
| * then one of the areas must match the area ID of this LSA. */ |
| |
| i = filter->num_areas; |
| if ((lsa->data->type == OSPF_AS_EXTERNAL_LSA) || |
| (lsa->data->type == OSPF_OPAQUE_AS_LSA)) |
| { |
| i = 0; |
| } |
| |
| if (i > 0) |
| { |
| area = (u_int32_t *) (filter + 1); |
| while (i) |
| { |
| if (*area == area_id.s_addr) |
| { |
| break; |
| } |
| i--; |
| area++; |
| } |
| } |
| else |
| { |
| i = 1; |
| } |
| |
| if (i > 0) |
| { |
| /* Area match. Check LSA type. */ |
| mask = ntohs (filter->typemask); |
| |
| if (mask & Power2[lsa->data->type]) |
| { |
| /* Type also matches. Check origin. */ |
| if ((filter->origin == ANY_ORIGIN) || |
| (filter->origin == IS_LSA_SELF (lsa))) |
| { |
| ospf_apiserver_send_msg (apiserv, msg); |
| } |
| } |
| } |
| } |
| /* Free message since it is not used anymore */ |
| msg_free (msg); |
| } |
| |
| |
| /* ------------------------------------------------------------- |
| * Followings are hooks invoked when LSAs are updated or deleted |
| * ------------------------------------------------------------- |
| */ |
| |
| |
| int |
| apiserver_notify_clients_lsa (u_char msgtype, struct ospf_lsa *lsa) |
| { |
| struct msg *msg; |
| /* default area for AS-External and Opaque11 LSAs */ |
| struct in_addr area_id = { 0L }; |
| |
| /* default interface for non Opaque9 LSAs */ |
| struct in_addr ifaddr = { 0L }; |
| |
| /* Only notify this update if the LSA's age is smaller than |
| MAXAGE. Otherwise clients would see LSA updates with max age just |
| before they are deleted from the LSDB. LSA delete messages have |
| MAXAGE too but should not be filtered. */ |
| if (IS_LSA_MAXAGE(lsa) && (msgtype == MSG_LSA_UPDATE_NOTIFY)) { |
| return 0; |
| } |
| |
| if (lsa->area) |
| { |
| area_id = lsa->area->area_id; |
| } |
| if (lsa->data->type == OSPF_OPAQUE_LINK_LSA) |
| { |
| ifaddr = lsa->oi->address->u.prefix4; |
| } |
| msg = new_msg_lsa_change_notify (msgtype, 0L, /* no sequence number */ |
| ifaddr, area_id, |
| lsa->flags & OSPF_LSA_SELF, lsa->data); |
| if (!msg) |
| { |
| zlog_warn ("notify_clients_lsa: msg_new failed"); |
| return -1; |
| } |
| /* Notify all clients that new LSA is added/updated */ |
| apiserver_clients_lsa_change_notify (msgtype, lsa); |
| |
| /* Clients made their own copies of msg so we can free msg here */ |
| msg_free (msg); |
| |
| return 0; |
| } |
| |
| int |
| ospf_apiserver_lsa_update (struct ospf_lsa *lsa) |
| { |
| return apiserver_notify_clients_lsa (MSG_LSA_UPDATE_NOTIFY, lsa); |
| } |
| |
| int |
| ospf_apiserver_lsa_delete (struct ospf_lsa *lsa) |
| { |
| return apiserver_notify_clients_lsa (MSG_LSA_DELETE_NOTIFY, lsa); |
| } |
| |
| #endif /* SUPPORT_OSPF_API */ |
| |