| 2004-11-26 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * Makefile.am: Need to add zassert.h to pkginclude_HEADERS. |
| |
| 2004-11-25 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * zebra.h: If not C99 and there's no va_copy macro and there is |
| a __va_copy macro, define va_copy as __va_copy. |
| |
| 2004-11-25 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * pid_output.c: (pid_output_lock) Fix 2 bugs: when locking, should |
| set l_whence to SEEK_SET, not SEEK_END. And after writing new |
| pid to file, must ftruncate to eliminate any extraneous bytes left |
| over from the last time a pid was written. |
| |
| 2004-11-24 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * zassert.h: New header file to declare a quagga-specific assert macro. |
| * log.c: (_zlog_assert_failed) New function called when assert fails |
| to log the error and abort. |
| * zebra.h: Include "zassert.h" instead of <assert.h>. |
| * regex.c: Include "zassert.h" instead of <assert.h>. |
| |
| 2004-11-23 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * sigevent.c: (signal_init) Set up some default signal handlers |
| so that processes will issue an error message before terminating |
| or dumping core. |
| (trap_default_signals) New function to set up signal handlers |
| for various signals that may kill the process. |
| (exit_handler) Call zlog_signal, then _exit. |
| (core_handler) Call zlog_signal, then abort. |
| * log.h: Declare new function zlog_signal. |
| * log.c: (zlog_signal) New function to log information about |
| a received signal before the process dies. Try to log a |
| backtrace also. |
| (quagga_signal_handler,signal_set) Should be static. |
| |
| 2004-11-23 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * log.c: (vzlog) Take a single va_list argument and use va_copy |
| as necessary for multiple traversals. |
| (zlog) Pass only one va_list to vzlog. |
| (zlog_*,plog_*) Use a macro for boilerplate code; pass only one |
| va_list to vzlog. |
| (zlog_set_file) Remove unused 2nd argument (flags). |
| (zlog_save_cwd,zlog_get_cwd,zlog_free_cwd) Remove unused functions. |
| * log.h: Remove ZLOG_*_INDEX defines (no longer used). |
| Remove unused 2nd argument from zlog_set_file prototype. |
| Fix prototype for zlog_rotate. |
| * command.c: (config_log_file) Remove unused 2nd arg to zlog_set_file. |
| * vty.c: (vty_out) Fix stdarg usage to perform multiple traversals |
| properly. |
| (vty_log) Must use va_copy for multiple traversals of va_list arg. |
| |
| 2004-11-19 David Young <dyoung@pobox.com> |
| |
| * log.c: (safe_strerror) New function: safe wrapper for strerror. |
| |
| 2004-11-19 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * sockopt.c: (setsockopt_so_recvbuf) Stop error message from being |
| printed every time. |
| |
| 2004-11-16 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * memory.h: Fix prototype for memory_init(). |
| * memory.c: Declare many functions and data structures static instead |
| of global. Fix prototype for memory_init(). |
| |
| 2004-11-15 Greg Troxel <gdt@fnord.ir.bbn.com> |
| |
| * sockopt.h: Avoid CMSG_ALIGN, and declare that sizes are without |
| alignment (users should use CMSG_SPACE). |
| |
| * zebra.h: Rationalize CMSG_SPACE compatibility defines. Warn if |
| asumming 4-byte alignment, since this isn't safe. |
| |
| 2004-11-15 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * memory.c: (zerror) Use zlog_err instead of fprintf to stderr. |
| Instead of exiting, log currenty memory usage and then abort. |
| (log_memstats) New function to log memory statistics, called by |
| zerror. |
| (show_memory_all) Loop over new mlists array instead of calling |
| show_memory_vty separately for each memory_list. |
| |
| 2004-11-08 Paul Jakma <paul@dishone.st> |
| |
| * buffer.c: Add missing include of log.h. |
| (buffer_flush_available) written is compared against |
| mostly against unsigned types, only for the writev do we need |
| signed compare, so declare it as size_t and cast it to ssize_t |
| just for the error compare when we've called writev. |
| * buffer.h: Add comment that buffer data sizes really should be |
| size_t. |
| |
| 2004-11-07 Paul Jakma <paul@dishone.st> |
| |
| * version.h.in: add autoconf configure_input output var |
| |
| 2004-11-04 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * vty.h: Remove fields in struct vty that were related to VTY_CONTINUE |
| capabilities (that were used only in bgpd/bgp_route.c and are now |
| removed). Also remove some other fields that were not being |
| used at all. |
| * vty.c: (vty_execute) Do not test for obsolete status values VTY_START |
| and VTY_CONTINUE. |
| (vty_read) Remove calls to vty->output_func since that was part |
| of the VTY_CONTINUE infrastructure that has been removed. |
| (vty_flush) Remove code to support VTY_START and VTY_CONTINUE. |
| (vty_close) Remove code to cancel vty->t_output thread, since that |
| thread was never actually used. |
| |
| 2004-11-04 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * vty.c: Vtysh connections to daemons should use buffering. |
| (vty_out) Remove exception for vty_shell_serv, just use buffer_write. |
| (vty_new) Increase output buffer size to 4096 rounded up to a |
| multiple of pagesize. |
| (vtysh_read) After command has been executed and all output buffered, |
| call buffer_flush_available and schedule further writes if the |
| buffers are not yet empty. |
| (vtysh_write) New function to flush output to vtysh when the socket |
| is writeable. |
| (vty_event) Added new VTYSH_WRITE event for flushing buffers to vtysh |
| clients. Also, should save read thread in vty->t_read so the |
| thread can be cancelled in vty_close. |
| * buffer.h: In struct buffer_data, remove unused "parent" field. |
| Convert "unsigned char *data" to "unsigned char data[0]" to save |
| a malloc. Declare new function buffer_flush_available that works |
| with non-blocking sockets. |
| * buffer.c: (buffer_data_new) Use a single malloc now that data is |
| a variable-size array at end of structure. |
| (buffer_data_free) Just a single free now that data is part of the |
| structure. |
| (buffer_write) Simplify the logic to make behavior more transparent. |
| (buffer_flush) Decrease b->length as data is written out. |
| (buffer_flush_vty_all) Decrease b->length as buffers are freed. |
| (buffer_flush_vty) Decrease b->length as data is written out. |
| (buffer_flush_available) New function to flush non-blocking sockets. |
| |
| 2004-11-01 Paul Jakma <paul@dishone.st> |
| |
| * sockopt.c: (setsockopt_pktinfo) remove, its unused. |
| |
| 2004-10-31 Paul Jakma <paul@dishone.st> |
| |
| * vty.c: As per Andrew's suggestions.. |
| (vty_serv_un) remove flags. |
| (vtysh_accept) close socket if we cant set NONBLOCK. Add flags. |
| * keychain.c: Convert some more strtoul users to VTY_GET_INTEGER. |
| * memory.h: Add MTYPE_THREAD_FUNCNAME and MTYPE_THREAD_STATS |
| * thread.c: Update stats and funcname alloc/free to use previous |
| specific memory type defines. Use XCALLOC and sizeof the type, |
| not the pointer. |
| * smux.c: fix int to size_t compile warnings |
| |
| 2004-10-29 Paul Jakma <paul@dishone.st> |
| |
| * vty.c: Move setting of sock to O_NONBLOCK from vty_serv_un |
| to vtysh_accept, where sock is the actual fd we wanted to set to |
| O_NONBLOCK, ie the /connected/ vtysh unix socket. |
| |
| 2004-10-23 Hasso Tepper <hasso at quagga.net> |
| |
| * zclient.c: Unbreak reading interface update message. Might fix |
| blocker bugzilla #109. |
| |
| 2004-10-22 Paul Jakma <paul@dishone.st> |
| |
| * sockopt.c: (getsockopt_ipv4_ifindex) no ifindex should be 0, not |
| -1. |
| (setsockopt_pktinfo) unexported |
| * sockopt.h: Cleanup SOCKOPT_CMSG defines a bit. Add a throwaway |
| define for SOPT_SIZE_CMSG_IFINDEX_IPV4 for systems which have |
| neither IP_RECVIF nor IP_PKTINFO (eg openbsd), thanks to Rivo |
| Nurges for highlighting problem and fix. |
| Fix elif that should be an else. |
| * command.h: Cleanup the defines a bit, add helper defines and |
| collapse all defines to use those. Add an attribute field to |
| cmd_element to support, eg hidden or deprecated commands, add |
| defun defines for such. All that's left to do is add logic |
| to command.c to check these attributes... ;) |
| * zebra.h: reserve ZEBRA_ROUTE_HSLS |
| |
| 2004-10-19 Hasso Tepper <hasso at quagga.net> |
| |
| * version.h.in: Define copyright string QUAGGA_COPYRIGHT. |
| * print_version.c: Remove. print_version () function moved to |
| command.[c|h]. |
| * command.c: Use QUAGGA_COPYRIGHT. |
| * Makefile.am: Remove useless version.c and print_version.c files. |
| |
| 2004-10-19 Andrew J. Schorr <aschorr@telemetry-investments.com> |
| |
| * zclient.c: (zebra_interface_address_read) If the destination address |
| is encoded as all zeroes, load it as a NULL pointer. |
| * if.h: Add comment describing struct connected destination field |
| and indicating that it may be NULL. Define macros |
| CONNECTED_DEST_HOST and CONNECTED_POINTOPOINT_HOST to help |
| with PtP logic (distinguish between host and subnet addressing). |
| * if.c: (if_lookup_address) Fix PtP logic to handle subnet addressing |
| properly, |
| (connected_lookup_address) ditto. |
| (connected_add_by_prefix) Handle case where destination is NULL, |
| * prefix.[c|h]: New functions ipv4_network_addr and |
| ipv4_broadcast_addr. |
| |
| 2004-10-13 Hasso Tepper <hasso at quagga.net> |
| |
| * command.c: Make CMD_ERR_NOTHING_TODO nonfatal if reading |
| configuration from file. Fixes critical bugzilla #113. |
| * smux.c, smux.h: Remove all defaults to initialize smux connection to |
| snmpd by default even if not configured to do so. "smux peer OID |
| <password>" initializes now connection and "no smux peer" terminates |
| it. |
| |
| 2004-10-13 Paul Jakma <paul@dishone.st> |
| |
| * (global) more const'ification. |
| * sockunion.c: (sockunion_su2str) buffer should be sized |
| SU_ADDRSTRLEN. |
| (sockunion_log) do not return stack variables, strdup buf before |
| return. |
| * vty.h: Fix up the VTY_GET_INTEGER macros. Testing caller supplied |
| values against ULONG_MAX is daft, when caller probably has passed |
| a type that can not hold ULONG_MAX. use a temporary long instead. |
| Add VTY_GET_LONG, make VTY_GET_INTEGER_RANGE use it, make |
| VTY_GET_INTEGER a define for VTY_GET_INTEGER_RANGE. |
| |
| 2004-10-11 Hasso Tepper <hasso at quagga.net> |
| |
| * command.h: Sync DEFUNSH with other macros. |
| * sockunion.c, sockunion.h: More const strings. |
| |
| 2004-10-11 Paul Jakma <paul@dishone.st> |
| |
| * thread.c: (funcname_thread_add_timer) |
| (funcname_thread_add_timer_msec) Fix mistakes from last change. |
| Pointed out by Liu Xin in [quagga-dev 1609]. |
| * if.h: mtu's should be unsigned. |
| * routemap.{c,h}: const char updates |
| * smux.{c,h}: ditto |
| |
| 2004-10-10 Paul Jakma <paul@dishone.st> |
| |
| * version.h.in: (pid_output*) add const qualifier. |
| * command.h: Change DEFUN func to take const char *[] rather |
| than char **, to begin process of fixing compile warnings in lib/. |
| Nearly all other changes in this commit follow from this change. |
| * buffer.{c,h}: (buffer_write) pointer-arithmetic is gccism, take |
| const void * and cast an automatic const char *p to it. |
| (buffer_putstr) add const |
| * command.c: (zencrypt) const qualifier |
| (cmd_execute_command_real) ditto |
| (cmd_execute_command_strict) ditto |
| (config_log_file) ditto. |
| Fix leak of getcwd() returned string. |
| * memory.{c,h}: Add MTYPE_DISTRIBUTE_IFNAME for struct dist ifname. |
| * distribute.{c,h}: Update with const qualifier. |
| (distribute_free) use MTYPE_DISTRIBUTE_IFNAME |
| (distribute_lookup) Cast to char *, note that it's ok. |
| (distribute_hash_alloc) use MTYPE_DISTRIBUTE_IFNAME. |
| (distribute_get) Cast to char *, note that it's ok. |
| * filter.c: Update with const qualifier. |
| * if.{c,h}: ditto. |
| * if_rmap.{c,h}: ditto. |
| (if_rmap_lookup) Cast to char *, note that it's ok. |
| (if_rmap_get) ditto. |
| * log.{c,h}: Update with const qualifier. |
| * plist.{c,h}: ditto. |
| * routemap.{c,h}: ditto. |
| * smux.{c,h}: ditto. Fix some signed/unsigned comparisons. |
| * sockopt.c: (getsockopt_cmsg_data) add return for error case. |
| * vty.c: Update with const qualifier. |
| |
| 2004-10-08 Hasso Tepper <hasso at quagga.net> |
| |
| * routemap.c, routemap.h: Make some string arguments const. |
| |
| 2004-10-05 Paul Jakma <paul@dishone.st> |
| |
| * version.h.in: print_version declaration is here, not in automake |
| generated version.h. |
| |
| 2004-10-08 Hasso Tepper <hasso at quagga.net> |
| |
| * command.c, command.h: Make argument of cmd_make_strvec function |
| const. |
| * command.c: Make hostname commands usable in vtysh again. |
| |
| 2004-10-07 Hasso Tepper <hasso at quagga.net> |
| |
| * command.c, pid_output.c, print_version.c, vty.c, vty.h: Make more |
| strings const. |
| |
| 2004-10-05 Hasso Tepper <hasso at quagga.net> |
| |
| * *.[c|h]: Make many strings cons and a lot of int -> unsigned int |
| changes to fix warnings. |
| |
| 2004-10-05 Paul Jakma <paul@dishone.st> |
| |
| * sockopt.{c,h}: add sockopt_iphdrincl_swab_{htosys,systoh}, |
| functions to change byte order between system IP_HDRINCL order |
| and host order. |
| * thread.c: (funcname_thread_add_timer_timeval) new function, add |
| timer at specified timeval. |
| (funcname_thread_add_timer) use funcname_thread_add_timer_timeval. |
| (funcname_thread_add_timer_msec) ditto |
| |
| 2004-10-04 Hasso Tepper <hasso at quagga.net> |
| |
| * memory.c, memory.h: Make char * argument of strdup functions const. |
| * prefix.c, prefix.h: Make many arguments const. Reorder stuff in |
| header. |
| * log.h: Make log message const in struct message. |
| * log.c: Fix some indenting. |
| * network.c, network.h: Make second argument of writen() const. |
| |
| 2004-10-03 Hasso Tepper <hasso at quagga.net> |
| |
| * command.h: Introduce SERVICE_NODE for "service <...>" commands. |
| * command.c: Don't initialize commands that don't make sense if vtysh |
| is used. |
| * vty.c: Make VTY_NODE appear in vtysh. |
| |
| 2004-10-03 James R. Leu <jleu at mindspring.com> |
| |
| * zclient.c, zclient.h: zclient functions for router id handling. |
| * zebra.h: New message types for router id handling. |
| |
| 2004-09-27 Paul Jakma <paul@dishone.st> |
| |
| * zebra.h: Add WANT_OSPF_WRITE_FRAGMENT for ospfd |
| to try to fragment oversized packets. Enabled only for Linux. |
| Add HAVE_IP_HDRINCL_BSD_ORDER to define struct ip byte order, |
| to consolidate various ad-hoc platform defines for same thing. |
| |
| 2004-09-26 Hasso Tepper <hasso at quagga.net> |
| |
| * vty.c, sockopt.c: Fix compiler warnings. |
| |
| 2004-09-23 Hasso Tepper <hasso at quagga.net> |
| |
| * linklist.h: Remove list and listnode typedefs. |
| * *.[c|h]: list -> struct list *, listnode -> struct listnode *. |
| |
| 2004-09-17 Paul Jakma <paul@dishone.st> |
| |
| * sockopt.c: Add missing bracket |
| |
| 2004-09-17 Paul Jakma <paul@dishone.st> |
| |
| * sockopt.{c,h}: Add setsockopt_so_recvbuf, for ripd and ripngd. |
| |
| 2004-09-13 Paul Jakma <paul@dishone.st> |
| |
| * command.c: Update the copyright string in the default motd. |
| |
| 2004-08-31 David Wiggins <dwiggins@bbn.com> |
| |
| * hash.c (hash_iterate): Save next pointer before calling |
| procedure, so that iteration works even if the called procedure |
| deletes the hash backet. |
| |
| * linklist.h (listtail): new macro, not yet used. |
| |
| 2004-08-27 Hasso Tepper <hasso at quagga.net> |
| |
| * command.c: Install "terminal length" commands only if vty is used. |
| Vtysh will handle it itself. |
| |
| 2004-08-26 Greg Troxel <gdt@fnord.ir.bbn.com> |
| |
| * sockopt.h: Define method-independent macro for callers of |
| get_ifindex to use for cmsg length. |
| |
| 2004-08-19 Paul Jakma <paul@dishone.st> |
| |
| * zebra.h: add MAX and MIN defines (eg for ospf6d) |
| |
| 2004-08-19 Paul Jakma <paul@dishone.st> |
| |
| * sockopt.c: include sockopt.h |
| rename some of the _pktinfo_ functions to _ifindex, where that is |
| their purpose. |
| (getsockopt_ipv6_pktinfo_ifindex) renamed to |
| getsockopt_ipv6_ifindex. |
| (setsockopt_ipv4_pktinfo) renamed to setsockopt_ipv4_ifindex |
| (setsockopt_pktinfo) update with previous and add comment re |
| AF_INET portability. |
| (setsockopt_ifindex) generic ifindex function ala |
| setsockopt_pktinfo. |
| (getsockopt_ipv4_pktinfo_ifindex) renamed to |
| getsockopt_ipv4_ifindex. |
| (getsockopt_ipv4_ifindex) rejiggling to reduce repeated |
| ifdef/elses. pktinfo case forgot to set ifindex. |
| (getsockopt_pktinfo_ifindex) renamed to |
| getsockopt_ifindex. update some calls to renamed functions. |
| * sockopt.h: Update renamed exported functions |
| Rename the CMSG_SIZE macros to IFINDEX. |
| Guard IPv4 PKTINFO in a conditional define. |
| |
| 2004-08-18 Paul Jakma <paul@dishone.st> |
| |
| * vty.c: (vty_serv_un) set unix vty socket to nonblocking |
| to prevent inadvertent blocking of daemons by use of |
| vtysh. TODO: disentangle manual paging from the buffer_write |
| path so that unix vty can use this path too and be reliable. |
| |
| 2004-07-23 Greg Troxel <gdt@poblano.ir.bbn.com> |
| |
| * sockopt.c (getsockopt_ipv4_pktinfo_ifindex): Make this compile |
| on NetBSD, and add comments to make it less confusing. Change the |
| sense of the SUNOS_5 test to make parallel structure between the |
| variables and the code. |
| |
| 2004-07-23 Paul Jakma <paul@dishone.st> |
| |
| * sockopt.h: Add SOPT_SIZE_CMSG_PKTINFO{_IPV{4,6}} define, for |
| sizeof pktinfo as appropriate, to be used when allocating msg |
| buffers. export setsockopt_pktinfo() and |
| getsockopt_pktinfo_ifindex() |
| * sockopt.c: (setsockopt_pktinfo_ifindex) new function to portably |
| set received ifindex sock option. |
| (getsockopt_pktinfo_ifindex) portably retrieve ifindex. |
| (getsockopt_cmsg_data) retrieve indicated control info from |
| message header. |
| (getsockopt_ipv6_pktinfo_ifindex) ipv6 version of above. |
| (setsockopt_ipv4_pktinfo) v4 version |
| (setsockopt_pktinfo) the exported version |
| (getsockopt_ipv4_pktinfo_ifindex) v4 specific version |
| (getsockopt_pktinfo_ifindex) the exported version |
| |
| 2004-07-14 Paul Jakma <paul@dishone.st> |
| |
| * sigevent.c: (quagga_signal_handler) add a global caught flag, set |
| the flags to a constant rather increment to be kinder. |
| (quagga_sigevent_process) new function, to do core of what |
| quagga_signal_timer did. dont block signals at all as sig->caught |
| is volatile sig_atomic_t and should be safe to access from signal |
| and normal contexts. The signal blocking is unneeded paranoia, but |
| is left intact under an ifdef, should some platform require it. |
| Check global caught flag before iterating through array. |
| (quagga_signal_timer) nearly everything moved to |
| quagga_sigevent_process. Left in under ifdef, in case some |
| platform could use a regular timer check for signals. |
| * sigevent.h: quagga_sigevent_process declaration. |
| * thread.c: (thread_fetch) check for signals at beginning of |
| scheduler loop, check for signals if select returns EINTR. |
| |
| 2004-07-13 Greg Troxel <gdt@poblano.ir.bbn.com> |
| |
| * sigevent.c: Don't block SIGTRAP and SIGKILL. Blocking SIGTRAP |
| confuses gdb, at least on NetBSD 2.0_BETA, where the block |
| succeeds. |
| |
| 2004-07-09 Paul Jakma <paul@dishone.st> |
| |
| * Merge Kunihiro's 'show route-map' change and add |
| compatibility aliases for route-map continue |
| * jhash.{c,h}: New files. Bob Jenkins' public domain hashing |
| function, as implemented in linux kernel by David Miller. |
| |
| 2004-07-09 Juris Kalnins <juris@mt.lv> |
| |
| * if.c: (if_cmp_func) fix for interface names where name is same, |
| but one has no number, eg "devtyp" and "devtyp0". |
| |
| 2004-06-30 Greg Troxel <gdt@poblano.ir.bbn.com> |
| |
| * Makefile.am: Make libzebra shared. |
| |
| 2004-06-21 Paul Jakma <paul@dishone.st> |
| |
| * ChangeLog: fix my last update config.h -> zebra.h ;) |
| * zebra.h: Fix gcc check. |
| |
| 2004-06-11 Sowmini Varadhan <sowmini.varadhan@sun.com> |
| |
| * filter.c: (access_list_remark_cmd) buffer_putstr doesnt need cast |
| to u_char. (ipv6_access_list_remark_cmd) ditto. |
| if.c: ditto |
| * network.c: (readn/writen) pointer arg should be type u_char. |
| * plist.c: needs to include stream.h, not declare stream functions |
| internally. |
| (various) Add static qualifier to internal functions. |
| (prefix_list_type_str) extraneous breaks in switch statement. |
| (ip_prefix_list_description_cmd) buffer_putstr doesnt need cast |
| * stream.h: depends on plist.h and export stream_put_prefix |
| * vty.c: (vty_<telnet option build functions>) should use |
| unsigned char, telnet options are 0 -> 255. |
| * zclient.c: various u_char<->char type cleanups. |
| * zebra.h: Having to define CMSG_* can apply to more than just |
| BSDI_NRL. |
| |
| 2004-06-09 Paul Jakma <paul@dishone.st> |
| |
| * zebra.h: __attribute__ is a gcc'ism |
| |
| 2004-06-04 Paul Jakma <paul@dishone.st> |
| |
| * type mismatch fixes |
| |
| 2004-05-18 Hasso Tepper <hasso@estpak.ee> |
| |
| * pqueue.[c|h]: Added as part of ospf6d merge from Zebra repository. |
| |
| 2004-05-08 Paul Jakma <paul@dishone.st> |
| |
| * zclient.c (zapi_ipv4_route) Follow Sowmini's lead and describe |
| message format. |
| |
| 2004-05-08 Sowmini Varadhan <sowmini.varadhan@sun.com> |
| |
| * zclient.c: (zapi_ipv4_add) collapsed into zapi_ipv4_route |
| (zapi_ipv4_delete) ditto. |
| (zapi_ipv4_route) add/delete a route by way of cmd arg. |
| (zapi_ipv6_add) collapsed into zapi_ipv6_route. |
| (zapi_ipv6_delete) ditto. |
| (zapi_ipv6_route) add/delete a route by way of cmd arg. |
| (zebra_interface_address_delete_read) collapsed into |
| zebra_interface_address_read. |
| (zebra_interface_address_delete_read) ditto. |
| (zebra_interface_address_read) read address add/delete messages |
| by way of type argument. Describe command message format. |
| (zebra_interface_add_read) Unconditionally read new ifmtu6 field. |
| Describe command message format. |
| (zebra_interface_state_read) Unconditionally read new ifmtu6 field. |
| (zclient_redistribute_set) Collapsed into zclient_redistribute |
| (zclient_redistribute_unset) ditto |
| (zclient_redistribute) set/unset redistribution. |
| (zclient_redistribute_default_set) Collapsed into |
| zclient_redistribute_default. |
| (zclient_redistribute_default_unset) ditto. |
| (zclient_redistribute_default) Redistribute default set/unset. |
| * zclient.h: delete zapi_ipv{4,6}_add, zapi_ipv{4,6}_delete. Add |
| zapi_ipv{4,6}_route. delete zclient_redistribute_set/unset. Add |
| zclient_redistribute. Ditto for |
| zclient_redistribute_default_{set/unset}. |
| |
| 2004-05-08 Sowmini Varadhan <sowmini.varadhan@sun.com> |
| |
| * if.h: Add mtu6 field to struct interface, IPv6 MTU may differ |
| from IPv4, and Solaris treats the MTU's differently. |
| Add connected_add_by_prefix, for use by later patch. |
| * if.c: (connected_add_by_prefix) Add prefix to connected list. |
| (if_flag_dump) Solaris: Dump IFF_IPv4/6 flag |
| (if_dump) Dump mtu6 flag, for HAVE_IPV6. |
| * command.c: (sockunion_getsockname) use socklen_t for len. |
| (sockunion_getpeername) ditto. |
| |
| 2004-04-21 Boris Kovalenko <boris@tagnet.ru> |
| |
| * daemon.c: (daemon) fix check for error return from setsid |
| |
| 2004-01-19 Paul Jakma <paul@dishone.st> |
| |
| * sigevent.{c,h}: New files, implement event handled signals. |
| see signal_init() in sigevent.h. |
| |
| 2003-12-23 Vincent Jardin <jardin@6wind.com> |
| |
| * {command.c, memory.c, vty.c, zebra.h}: Add isisd support |
| |
| 2003-12-22 Greg Troxel <gdt@fnord.ir.bbn.com> |
| |
| * vty.c (vty_use_backup_config): Don't free filenames before using |
| them for unlink. |
| |
| 2003-08-20 Yasuhiro Ohara <yasu@sfc.wide.ad.jp> |
| |
| * command.c: Fix <cr> display problem for command line |
| description |
| |
| 2003-05-24 Anil Madhavapeddy |
| |
| * (sockunion.c): Incorrect bounds specified in sockunion_log() |
| |
| 2003-05-08 Sergiy Vyshnevetskiy <serg @ vostok.net> |
| |
| * vty.c: -A option |
| |
| 2003-04-19 Hasso Tepper <hasso@estpak.ee> |
| |
| * rip_routemap.c: sync daemon's route-map commands to have same |
| syntax |
| |
| 2002-09-28 Yasuhiro Ohara <yasu@sfc.wide.ad.jp> |
| |
| * vty.c (vty_flush): One line more on vty. |
| |
| 2002-09-27 Kunihiro Ishiguro <kunihiro@ipinfusion.com> |
| |
| * vector.c (vector_lookup): Add new function. |
| |
| 2002-08-19 Kunihiro Ishiguro <kunihiro@ipinfusion.com> |
| |
| * thread.c (timeval_adjust): Fix unconditional crush due to |
| FreeBSD's select() system call timeval value check. |
| |
| 2002-07-07 Kunihiro Ishiguro <kunihiro@ipinfusion.com> |
| |
| * zebra-0.93 released. |
| |
| 2002-06-21 Kunihiro Ishiguro <kunihiro@ipinfusion.com> |
| |
| * if.c (ifc_pointopoint): Add ifc_pointopoint() accoding to Frank |
| van Maarseveen's suggestion. |
| |
| 2002-06-18 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * command.c: Change bcopy() to memcpy(). |
| |
| 2001-12-12 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * command.c (config_password): Fix host.password clear bug. |
| Reported by Wang Jian <lark@linux.net.cn>. |
| |
| 2001-08-29 Kunihiro Ishiguro <kunihiro@ipinfusion.com> |
| |
| * thread.c (thread_should_yield): New function to check thread |
| should yeild it's execution to other thread. Suggested by: Rick |
| Payne <rickp@ayrnetworks.com> |
| |
| 2001-08-20 Kunihiro Ishiguro <kunihiro@ipinfusion.com> |
| |
| * thread.c (thread_timer_cmp): Rewrite function. |
| |
| * hash.c: Add hash_get(). Change hash_pull() to hash_release(). |
| |
| 2001-08-19 Kunihiro Ishiguro <kunihiro@ipinfusion.com> |
| |
| * zebra-0.92a released. |
| |
| 2001-08-15 Kunihiro Ishiguro <kunihiro@ipinfusion.com> |
| |
| * zebra-0.92 released. |
| |
| 2001-08-12 Akihiro Mizutani <mizutani@dml.com> |
| |
| * prefix.c (netmask_str2prefix_str): Convert "1.1.0.0 255.255.0.0" |
| string to "1.1.0.0/16". |
| |
| 2001-08-10 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * filter.c (access_list_lookup): access_list_lookup's first |
| argument is changed from address family to AFI. |
| |
| * plist.c: (prefix_list_lookup): Likewise. |
| |
| 2001-07-27 Akihiro Mizutani <mizutani@dml.com> |
| |
| * plist.c: ge and le display order is changed. Old compatible |
| rule (len <= ge-value <= le-value) is removed. |
| |
| 2001-07-08 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * prefix.h: Temporary fix for alignment of prefix problem. |
| |
| 2001-06-21 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * prefix.h (struct prefix): Remove safi and padding field. |
| (struct prefix_ipv4): Likewise. |
| (struct prefix_ipv6): Likewise. |
| (struct prefix_ls): Likewise. |
| (struct prefix_rd): Likewise. |
| |
| * command.h (enum node_type): Preparation for BGP new config. |
| |
| * vty.c (vty_end_config): Likewise. |
| |
| 2001-06-17 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * routemap.c (route_map_rule_delete): Call func_free when |
| route-map rule is deleted. |
| |
| 2001-06-14 "Akihiro Mizutani" <mizutani@dml.com> |
| |
| * routemap.c (route_map_index_lookup): Prevent to use deny and |
| permit for same route-map sequence. |
| |
| 2001-04-12 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vty.c (vty_read_config): Fix warning. |
| |
| 2001-03-08 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * command.c (IPV6_PREFIX_STR): Add '.' and '%' for IPv6 address |
| strings. |
| |
| 2001-03-07 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * zebra.h (_XPG4_2): Define _XPG4_2 and __EXTENSIONS__ for |
| CMSG_FIRSTHDR. |
| |
| 2001-03-07 Michael Rozhavsky <mrozhavsky@opticalaccess.com> |
| |
| * zebra.h (struct in_pktinfo): structure in_pktinfo declaration. |
| |
| 2001-02-19 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * memory.c (memory_list_lib): Add MTYPE_NEXTHOP for "show memory |
| lib" member. |
| |
| 2001-02-13 Matthew Grant <grantma@anathoth.gen.nz> |
| |
| * vty.c (vty_read_config): Revert check of integrate_default when |
| VTYSH is defined. |
| |
| 2001-02-13 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vty.c (vty_read_config): Do not check integrate_default. That |
| should be used only by vtysh. |
| |
| 2001-02-08 Matthew Grant <grantma@anathoth.gen.nz> |
| |
| * vty.c (vty_serv_un): Set umask 0077. |
| (vty_read_config): Stat for vtysh Zebra.conf, if found startup and |
| wait for boot configuration. |
| |
| * if.c (if_lookup_address): Make it smart implementation. |
| |
| * sockopt.c (setsockopt_multicast_ipv4): Set up a multicast socket |
| options for IPv4 This is here so that people only have to do their |
| OS multicast mess in one place rather than all through zebra, |
| ospfd, and ripd . |
| |
| 2001-02-04 Akihiro Mizutani <mizutani@dml.com> |
| |
| * plist.c (vty_prefix_list_install): Even when argument is |
| invalid, new memory is allocated. Now memory allocation is done |
| after argument check. |
| |
| 2001-02-01 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * zebra-0.91 is released. |
| |
| 2001-01-31 Akihiro Mizutani <mizutani@dml.com> |
| |
| * vty.c (vty_login): Add vty login command. |
| |
| 2001-01-31 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vty.c (vty_reset): Close accept socket. |
| |
| 2001-01-30 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * memory.h (enum): MTYPE_ATTR_TRANSIT is added for unknown transit |
| attribute. |
| |
| 2001-01-22 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * zclient.c (zebra_interface_address_add_read): Fetch interface |
| address flag. |
| (zebra_interface_address_delete_read): Likewise. |
| |
| 2001-01-16 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * table.c (route_node_match_ipv4): Utility function for IPv4 |
| address lookup. |
| (route_node_match_ipv6): Utility function for IPv4 address lookup. |
| |
| 2001-01-15 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * if.c: Delete RIP_API part until new implementation comes out. |
| |
| 2001-01-13 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * hash.h (struct Hash): Rename alloc to count. Change type to |
| unsigned long. |
| |
| * stream.c (stream_getc_from): New function. |
| (stream_getw_from): Likewise. |
| |
| * zebra.h (ZEBRA_FLAG_STATIC): Add new flag for persistent route. |
| |
| 2001-01-11 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * flap.c: File is removed. |
| |
| * flap.c: Likewise. |
| |
| * roken.h: Likewise. |
| |
| * buffer.c (buffer_new): Remove type option to buffer_new(). |
| |
| 2001-01-10 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * zclient.c (zapi_ipv4_delete): Remove OLD_RIB part. |
| |
| 2001-01-09 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * zebra-0.90 is released. |
| |
| * command.c: Update Copyright year. |
| |
| 2001-01-09 Matthew Grant <grantma@anathoth.gen.nz> |
| |
| * if.c (if_create): Register connected_free() function for |
| deletion. |
| (if_delete): Free connected information when the interface is |
| deleted. |
| (if_lookup_by_index): Fix argument type from int to unsigned int. |
| (connected_add): Keep list in order if old info found, essential |
| for repeatable operation in some daemons. |
| |
| 2001-01-09 endo@suri.co.jp (Masahiko Endo) |
| |
| * vty.c (vty_flush): When vty->statis is VTY_CLOSE do not add vty |
| read thread. |
| |
| 2001-01-08 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * filter.c (access_list_delete): Access-list name is not freed. |
| |
| * plist.c (prefix_list_delete): Prefix-list name is not freed. |
| |
| 2000-12-29 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * zclient.c (zclient_start): Change to use UNIX domain |
| socket for zebra communication. |
| |
| * vector.c (vector_init): vector_alloc and vector_data_alloc is |
| removed. All memory allocation count should be maintained by |
| XMALLOC and XFREE macros. |
| |
| 2000-12-28 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * zebra.h (ZEBRA_NEXTHOP_IFINDEX): Define ZEBRA_NEXTHOP_* values. |
| |
| 2000-12-27 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * zebra.h (ZEBRA_ERR_RTEXIST): Make zebra error code to negative |
| value. |
| |
| 2000-12-25 "Wataru Uno" <wataru@po.ntts.co.jp> |
| |
| * vty.c (vtysh_read): Don't allocate new buffer because buffer is |
| allocated in vty_new (). |
| |
| 2000-12-14 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * memory.h (enum): Add MTYPE_AS_FILTER_STR. |
| |
| * command.c (config_write_terminal): Display "end" at the end of |
| configuration. |
| |
| * plist.c (vty_prefix_list_install): Use AF_INET to determine |
| lenum length. |
| |
| 2000-12-13 "Wataru Uno" <wataru@po.ntts.co.jp> |
| |
| * buffer.c (buffer_flush_vty): If IOV_MAX defined in the System, |
| then all lines write by IOV_MAX. |
| |
| 2000-12-12 Michael Rozhavsky <mrozhavsky@opticalaccess.com> |
| |
| * command.c (config_write_file): Robust method for writing |
| configuration file and recover from backing up config file. |
| |
| 2000-11-29 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * smux.c (smux_connect): More fail check. |
| (smux_trap): When SMUX connection is not established, do nothing. |
| |
| 2000-11-28 Gleb Natapov <gleb@nbase.co.il> |
| |
| * thread.c (thread_fetch): Execut event list first. Old event |
| list is renamed to ready list. With this change, event thread is |
| executed before any other thread. |
| |
| * thread.h (struct thread_master): Add ready list. |
| |
| 2000-11-28 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * linklist.c (listnode_add_after): Add node right after the |
| listnode pointer. |
| |
| 2000-11-27 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * smux.h: Pass struct variable to WriteMethod. |
| |
| 2000-11-25 Frank van Maarseveen <F.vanMaarseveen@inter.NL.net> |
| |
| * if.c (if_lookup_address): When looking up interface with IP |
| address, Sometimes multiple interfaces will match. Now PtP |
| interfaces prevail in such a case which seem the right thing to |
| do: There will probably also be host routes which usually prevail |
| over network routes. |
| |
| 2000-11-25 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * smux.c (smux_trap): SMUX trap implementation. |
| |
| 2000-11-19 Akihiro Mizutani <mizutani@dml.com> |
| |
| * plist.c: Add automatic conversion function of an old rule. |
| ex.) 10.0.0.0/8 ge 8 -> 10.0.0.0/8 le 32 |
| |
| 2000-11-16 Yon Uriarte <ukl2@rz.uni-karlsruhe.de> |
| |
| * zclient.c (zebra_interface_add_read): Read hardware address when |
| hw_addr_len is greater than 0. |
| |
| 2000-11-15 Akihiro Mizutani <mizutani@dml.com> |
| |
| * plist.c: The rule of "len <= ge-value <= le-value" |
| was changed to "len < ge-value <= le-value". |
| |
| 2000-11-09 Yasuhiro Ohara <yasu@sfc.wide.ad.jp> |
| |
| * memory.[ch]: Added #define and functions for ospf6d. |
| |
| * log.[ch]: some platform says that the data of used va_list |
| is undefined. Changed to hold list of va_list for each |
| vsnprintf. |
| |
| 2000-11-07 Rick Payne <rickp@rossfell.co.uk> |
| |
| * memory.h (enum): Add MTYPE_COMMUNITY_REGEXP. |
| |
| 2000-11-06 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * command.c (config_exit): Fix bug of missing break after case |
| BGP_VPNV4_NODE. |
| |
| 2000-10-30 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vector.c (vector_unset): Check i is not nevative. |
| |
| 2000-10-24 Arkadiusz Miskiewicz <misiek@pld.org.pl> |
| |
| * smux.c (smux_sock): Set terminating '\0'. Check address family. |
| |
| * vty.c (vty_serv_sock_addrinfo): Set terminating '\0'. Use |
| gai_strerror. Check address family. |
| |
| 2000-10-23 Jochen Friedrich <jochen@scram.de> |
| |
| * smux.c: Use linklist rather than vector. |
| (smux_getnext): A SMUX subagent has to behave as if it manages the |
| whole SNMP MIB tree itself. It's the duty of the master agent to |
| collect the best answer and return it to the manager. See RFC 1227 |
| chapter 3.1.6 for the glory details :-). ucd-snmp really behaves |
| bad here as it actually might ask multiple times for the same |
| GETNEXT request as it throws away the answer when it expects it in |
| a different subtree and might come back later with the very same |
| request. |
| |
| 2000-10-23 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * command.c (cmd_init): Log related command are only installed for |
| terminal mode. |
| |
| 2000-10-21 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * Makefile.am (libzebra_a_SOURCES): Remove duplicated buffer.c. |
| |
| * zebra.h: Remove #warn directive. |
| |
| 2000-10-20 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * keychain.c (keychain_init): Register "key chain" command to |
| KEYCHAIN_NODE and KEYCHAIN_KEY_NODE. |
| |
| * vty.c (vty_end_config): Fix missing vty_cinfig_unlock for other |
| CONFIG_NODE. |
| |
| * command.c (config_end): Likewise. |
| |
| * keychain.c (keychain_get): Key is sorted by it's identifier |
| value. |
| |
| 2000-10-19 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * linklist.c (list_delete_all_node): Call delete function if it is |
| defined. |
| |
| * command.c (cmd_execute_command_strict): Add modification for |
| vtysh. |
| (cmd_execute_command_strict): Remove first argument cmdvec because |
| it is global varibale in command.c. |
| |
| 2000-10-18 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * command.c (cmd_init): Install |
| copy_runningconfig_startupconfig_cmd only in terminal mode. |
| |
| * linklist.c (list_delete_node): Simplify the function. |
| (listnode_lookup): Renamed from list_lookup_node. |
| |
| 2000-10-17 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * stream.h: Undef stream_read and stream_write without |
| parenthesis. |
| |
| * newlist.c: File removed. |
| |
| * newlist.h: Likewise. |
| |
| * linklist.c (list_new): Remove list_init(). To allocate new |
| linked list, please use list_new(). |
| (listnode_add): Remove list_add_node(). To add new node to linked |
| list, please use listnode_add(). |
| (list_delete_by_val): Revemove fucntion. |
| |
| 2000-10-16 Nobuaki Tanaka <nobby@po.ntts.co.jp> |
| |
| * table.c (route_table_free): Reimplement route_table_free(). |
| |
| 2000-10-11 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * keychain.c (keychain_get): Register key_delete_func to key |
| list's delete function. Use linklist.c instead of newlist.c. |
| |
| 2000-10-04 Akihiro Mizutani <mizutani@dml.com> |
| |
| * filter.c (access_list_remark): Add access-list's remark command. |
| (no_access_list): "no access-list 100 permit any" error message |
| bug is fixed. |
| |
| 2000-10-03 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * memory.h (enum): Add MTYPE_SOCKUNION. |
| |
| 2000-10-02 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * zebra-0.89 is released. |
| |
| 2000-10-01 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * linklist.c (list_add_node_head): Delete unused function. |
| (list_add_node_tail): Likewise. |
| |
| 2000-09-26 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * stream.c (stream_read_unblock): Add new function for unblocking |
| read. |
| |
| 2000-09-26 Jochen Friedrich <jochen@nwe.de> |
| |
| * smux.c (smux_register): Fix bug of can't register more than one |
| MIB with SMUX. |
| |
| 2000-09-26 Makoto Otsuka <otsuka@inl.ntts.co.jp> |
| |
| * vty.c (vty_close): Fix memory leak of sb_buffer. |
| (vty_new): Likewise. |
| |
| 2000-09-21 steve@Watt.COM (Steve Watt) |
| |
| * log.h: Do not declare zlog_priority[0] variable. |
| |
| 2000-09-12 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * linklist.h (struct _list ): Add member cmp for compare function. |
| (struct _list ): Member up is deleted |
| |
| 2000-09-12 David Lipovkov <dlipovkov@OpticalAccess.com> |
| |
| * if.c: Include RIP_API header when RIP API is enabled. |
| |
| 2000-09-10 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * prefix.c (prefix_free): Siplify prefix_free(). |
| |
| * keychain.c (key_match_for_accept): strncmp check bug is fixed. |
| |
| 2000-09-07 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * zebra.h: Merge roken.h into zebra.h. |
| |
| 2000-09-05 Akihiro Mizutani <mizutani@dml.com> |
| |
| * routemap.c (route_map_init_vty): Install route-map command to |
| RMAP_NODE. |
| |
| 2000-08-22 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * thread.c (thread_get_id): Remove pthread related garbage. |
| |
| * command.h (struct host): Likewise. |
| |
| * zebra.h: Likewise. |
| |
| 2000-08-20 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * command.h (node_type ): Add AAA node for authentication. |
| |
| * vty.c (vty_close): Do not close stdout. |
| |
| 2000-08-18 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vty.c (vty_init_vtysh): Added for vtysh. |
| |
| * distribute.c (districute_list_prefix_all): Interface independent |
| filter can be set. |
| (distribute_list_all): Likewise. |
| (config_show_distribute): Display current distribute-list status |
| for "show ip protocols". |
| |
| 2000-08-18 Akihiro Mizutani <mizutani@dml.com> |
| |
| * command.c (config_terminal_no_length): no terminal monitor -> |
| terminal no monitor |
| (cmd_init): Do not install service_terminal_length_cmd into |
| ENABLE_NODE. |
| |
| * vty.c (terminal_no_monitor): no terminal length -> terminal no |
| length. |
| |
| 2000-08-17 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * zebra-0.88 is released. |
| |
| 2000-08-17 Magnus Ahltorp <ahltorp@nada.kth.se> |
| |
| * vty.h (struct vty ): Add iac_sb_in_progress and sb_buffer for |
| better IAC handling. |
| |
| * vty.c (vty_telnet_option): Change telnet option handling. |
| |
| 2000-08-15 Gleb Natapov <gleb@nbase.co.il> |
| |
| * zclient.c (zclient_redistribute_unset): New function added. |
| |
| 2000-08-14 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * zclient.c (zebra_interface_add_read): Change ifindex restore |
| size from two octet to four. |
| (zebra_interface_state_read): Likewise. |
| (zebra_interface_address_add_read): Likewise. |
| |
| 2000-08-13 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vty.c (vty_event): Use vector_set_index() instead of |
| vector_set(). |
| |
| 2000-08-07 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * zebra.h (ZEBRA_XXX_DISTANCE_DEFAULT): Define Default |
| Administrative Distance of each protocol. |
| |
| 2000-08-07 Matthew Grant <grantma@anathoth.gen.nz> |
| |
| * if.h (struct interface ): Add new member bandwidth to struct |
| interface. |
| |
| * zclient.c (zebra_interface_add_read): Fetch bandwidth value. |
| (zebra_interface_state_read): Likewise. |
| |
| 2000-08-07 Gleb Natapov <gleb@nbase.co.il> |
| |
| * routemap.c (route_map_event_hook): New hook route_map_event_hook |
| is added. This hook is called when route-map is changed. The |
| parameters passed to the hook are 'event' and 'route-map name' |
| |
| * routemap.h: Add prototype for route_map_event_hook(). |
| |
| 2000-08-06 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * zclient.c (zebra_ipv4_route): zebra_ipv4_route(), |
| zebra_ipv4_add(), zebra_ipv4_delete() are removed. |
| |
| * routemap.c (route_map_empty): Add new function. |
| (route_map_delete): Use route_map_index_delete() instead of |
| route_map_index_free(). |
| (route_map_index_free): Function removed. |
| |
| 2000-08-06 Gleb Natapov <gleb@nbase.co.il> |
| |
| * routemap.c (route_map_index_delete): Add check for route-map is |
| empty or not. |
| |
| 2000-08-03 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * zclient.c (zebra_ipv4_add): Change socket arguemnt with struct |
| zclient. |
| |
| 2000-08-02 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * zclient.h (struct zebra): Add obuf for output buffer. |
| |
| * if.c: Remove #ifdef NRL enclosing if_nametoindex() and |
| if_indextoname(). |
| |
| 2000-08-02 David Lipovkov <davidl@nbase.co.il> |
| |
| * if.h (IF_PSEUDO_UNSET): IF_PSEUDO related macro added. |
| (IF_UNKNOWN_SET): IF_UNKNOWN related macro deleted. |
| |
| * if.c (interface_pseudo): Add "pseudo" command to interface node. |
| (no_interface_pseudo): Add "no pseudo" command to interface node. |
| |
| * zclient.c (zebra_interface_add_read): Set pseudo flag when it is |
| send from zebra. |
| |
| 2000-08-01 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * zebra.h (ZEBRA_IPV4_NEXTHOP_LOOKUP): Add new message. |
| (ZEBRA_IPV6_NEXTHOP_LOOKUP): Likewise. |
| |
| * vty.c (vty_serv_un): Use AF_UNIX for backward compatibility. |
| |
| 2000-07-31 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vty.c: Use vector for VTY server thread listing instead of |
| single value. |
| |
| 2000-07-30 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * keychain.c (no_key_chain): "no key chain WORD" command is added. |
| |
| 2000-07-29 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * command.c (config_from_file): If command fail in |
| KEYCHAIN_KEY_NODE, down to KEYCHAIN_NODE. |
| |
| * vty.h (struct vty ): Add index_sub member. |
| |
| 2000-07-27 Akihiro Mizutani <mizutani@dml.com> |
| |
| * if.c: Help strings updates. |
| |
| 2000-07-11 Akihiro Mizutani <mizutani@dml.com> |
| |
| * command.c (no_config_enable_password): Add "no enable password" |
| command. |
| (config_write_host): Display password string. |
| |
| * routemap.c (route_map_delete_match): Add support for delete |
| match without argument. |
| (route_map_delete_set): Likewise. |
| |
| 2000-07-09 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * command.h (node_type ): Change KEYCHAIN_NODE and |
| KEYCHAIN_KEY_NODE place just before INTERFACE_NODE. |
| |
| 2000-07-09 Jochen Friedrich <jochen@scram.de> |
| |
| * smux.c (config_write_smux): Fixes the option to override OID and |
| password for SMUX. |
| |
| 2000-07-09 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * command.h (node_type ): Add SMUX_NODE for SMUX configuration. |
| |
| 2000-07-09 Toshiaki Takada <takada@zebra.org> |
| |
| * command.c: Sort descvec command's help. |
| |
| * vty.c (vty_describe_command): Display '<cr>' at the end of |
| descriptions. |
| |
| 2000-07-05 Toshiaki Takada <takada@zebra.org> |
| |
| * command.c (cmd_ipv6_match), (cmd_ipv6_prefix_match): Fix bug |
| treatment of double colon. |
| |
| 2000-07-04 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * zclient.h: Add zclient_redistribute_default_{set,unset}(). |
| |
| * keychain.c: New file for authentication key management. |
| * keychain.h: Likewise. |
| |
| * tcpfilter.c: New file for TCP/UDP base filtering using ipfw or |
| ipchains. |
| * tcpfilter.h: Likewise. |
| |
| * flap.h: New file for route flap dampening. |
| * flap.c: Likewise. |
| |
| 2000-07-04 Toshiaki Takada <takada@zebra.org> |
| |
| * filter.c (struct filter): Add exact flag. |
| (access_list): Add exact-match command. |
| (ipv6_access_list): Add exact-match command. |
| |
| 2000-07-03 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * zebra.h (ZEBRA_REDISTRIBUTE_DEFAULT_ADD): New message for |
| request default route. |
| |
| 2000-07-01 Hideaki YOSHIFUJI ($B5HF#1QL@(B) <yoshfuji@ecei.tohoku.ac.jp> |
| |
| * smux.c: Add IPv6 smux connection code. |
| |
| 2000-06-15 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vty.c (vty_complete_command): To cooperate readline library, |
| returned string is newly allocated. So some match function case |
| need, free of memory. |
| |
| 2000-06-12 Akihiro Mizutani <mizutani@dml.com> |
| |
| * distribute.c: Fix help strings. |
| |
| 2000-06-11 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * command.c (cmd_complete_command): Add check for vector_slot |
| (vline, index) is not NULL when calculating lcd. |
| (cmd_entry_function): First check variable arguemnt to prevent it |
| from completion. |
| |
| 2000-06-10 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vty.h (struct vty ): Add output_count member for displaying |
| output route count. Remove arugment arg from output_func because |
| the value is passed by vty argument. Change output to output_rn. |
| Add output_clean function pointer member. Add output_type member. |
| |
| 2000-06-10 Toshiaki Takada <takada@zebra.org> |
| |
| * command.c (show_startup_config): Add "show startup-config" |
| command. |
| |
| 2000-06-06 Akihiro Mizutani <mizutani@dml.com> |
| |
| * filter.c: Fix help strings. |
| |
| 2000-06-05 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * prefix.h (struct prefix_rd): New prefix structure for routing |
| distinguisher. |
| (struct prefix): Add padding to every prefix structure. |
| |
| |
| * routemap.c (route_map_add_match): When completely same match |
| statement exists, don't duplicate it. |
| |
| 2000-06-05 Akihiro Mizutani <mizutani@dml.com> |
| |
| * routemap.c: Change NAME to WORD. |
| |
| * plist.c: Fix help strings. |
| |
| 2000-06-02 Akihiro Mizutani <mizutani@dml.com> |
| |
| * routemap.c: Fix route-map help strings. |
| |
| 2000-06-01 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * command.c (cmd_filter_by_completion): Fix CMD_VARARG treatment |
| to filter other non vararg commands. |
| |
| * routemap.c (route_map_init_vty): Use install_default() for |
| install common commands into route-map node.. |
| |
| 2000-06-01 Akihiro Mizutani <mizutani@dml.com> |
| |
| * command.h (OSPF_STR): Macro added. |
| |
| 2000-05-31 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * command.c (cmd_complete_command): LCD completion must not modify |
| installed command string. |
| |
| * plist.c (ipv6_prefix_list): Fix wrong syntax definition. Change |
| X:X::X:X to X:X::X:X/M. |
| |
| 2000-05-31 Toshiaki Takada <takada@zebra.org> |
| |
| * vty.c (show_history): New defun added. |
| |
| 2000-05-30 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * command.h (CMD_COMPLETE_LIST_MATCH): New define for completion |
| list. CMD_COMPLETE_MATCH is used for LCD completion. |
| |
| * vty.c (vty_complete_command): Matched string's LCD is completed. |
| |
| * command.c (cmd_lcd): New function for calculate LCD of matched |
| strings. |
| |
| 2000-05-26 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * command.c (install_default): config_write_terminal_cmd, |
| config_write_file_cmd, config_write_memory_cmd are added to |
| default node. |
| |
| * memory.c (memory_init): Divide show memory command into each |
| sort. |
| |
| * command.c (cmd_init): config_write_terminal_cmd, |
| config_write_file_cmd, config_write_memory_cmd are added to |
| CONFIG_NODE. |
| |
| * routemap.c (route_map_index_free): New function. |
| (no_route_map_all): New DEFUN for "no route-map NAME". |
| |
| * filter.c (no_access_list_all): New DEFUN for delete access-list |
| with NAME. |
| (no_ipv6_access_list_all): Likewise. |
| |
| 2000-05-23 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * plist.c: Change IPV6_PREFIX to X:X::X:X. When "any" is |
| specified, user can not use "ge" and "le" statement. |
| |
| 2000-05-22 Thomas Molkenbur <tmo@datus.datus.com> |
| |
| * routemap.c (route_map_add_set): Fix bug of next pointer missing. |
| |
| * table.c (route_table_free): Like wise. |
| |
| 2000-05-22 Toshiaki Takada <takada@zebra.org> |
| |
| * vty.c (vty_stop_input): Set history pointer to the latest one. |
| |
| * vty.c (vty_hist_add): Do not add command line history when input |
| is as same as previous one. |
| |
| 2000-05-14 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * memory.h (enum): Add MTYPE_ECOMMUNITY and MTYPE_ECOMMUNITY_VAL. |
| |
| 2000-05-13 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * command.h (node_type ): Add BGP_VPNV4_NODE. |
| |
| 2000-05-08 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vty.c (vtysh_accept): Add cast of struct sockaddr * to bind |
| argument. Reported by: Vesselin Mladenov <mladenov@netbg.com>. |
| |
| * filter.c (ipv6_access_list): Add IPv6 prefix example instead of |
| IPv4 example. Reported by: Love <lha@s3.kth.se>. |
| |
| * command.c (cmd_complete_command): Make it sure last element of |
| matchvec is NULL. This fix problem which cause crush in |
| vty_complete_command(). Reported by: JINMEI Tatuya |
| <jinmei@isl.rdc.toshiba.co.jp>. |
| |
| 2000-04-28 Love <lha@s3.kth.se> |
| |
| * prefix.h (struct prefix): Add padding. |
| |
| 2000-04-28 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * command.c (show_version): Update copyright year. |
| |
| 2000-04-27 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * routemap.c (route_map_apply): When map is NULL, return deny. |
| |
| 2000-04-26 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * filter.c (access_list_apply): When access is NULL, return deny. |
| |
| * plist.c (prefix_list_apply): When plist is NULL, return deny. |
| |
| 2000-04-23 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * command.h (node_type ): Change RDISC_NODE to IRDP_NODE. |
| |
| 2000-04-18 Toshiaki Takada <takada@zebra.org> |
| |
| * filter.[ch] (access_list_add_hook), (access_list_delete_hook): |
| Add argument for hook function to give struct access_list *. |
| |
| 2000-04-17 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * plist.c (prefix_list_entry_match): In case of le nor ge is |
| specified, exact match is performed. |
| (prefix_list_entry_match): Add any entry matching check. |
| |
| 2000-04-09 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vty.c (exec_timeout): Separate timeout setting to minutes and |
| seconds. |
| (no_exec_timeout): Add "no exec-timeout" command. |
| |
| * vty.h (VTY_TIMEOUT_DEFAULT): Change default value from 300 to |
| 600. |
| |
| 2000-03-31 Jochen Friedrich <jochen@scram.de> |
| |
| * smux.h (SMUX_CLOSE): The SMUX_CLOSE PDU is implicit integer, so |
| it is a primitive encoding and not constructed. |
| |
| 2000-03-28 Toshiaki Takada <takada@zebra.org> |
| |
| * memory.[ch] (enum): Add MTYPE_OSPF_EXTERNAL_INFO. |
| |
| 2000-03-26 Love <lha@s3.kth.se> |
| |
| * zclient.c (zclient_read): Add nbytes size check for |
| ZEBRA_HEADER_SIZE. Check return value of steam_read (). |
| |
| 2000-03-26 Rick Payne <rickp@rossfell.co.uk> |
| |
| * routemap.c: Add flexible route-map commands such as on-match |
| next, on-match goto N. |
| |
| * routemap.h: Likewise |
| |
| 2000-03-23 Adrian Bool <aid@u.net.uk> |
| |
| * command.c (config_log_trap): Add new command "log trap |
| PRIORITY". |
| |
| 2000-03-14 Toshiaki Takada <takada@zebra.org> |
| |
| * memory.c (struct memory_list): Add Link List and Link Node |
| to view. |
| |
| * memory.h (enum): Remove MTYPE_OSPF_EXTERNAL_ROUTE. |
| |
| 2000-01-20 Hideto Yamakawa <hideto.yamakawa@soliton.co.jp> |
| |
| * str.c (snprintf): Fix bug of calling sprintf instead of |
| vsprintf. |
| |
| 2000-01-16 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * memory.h (enum): Add MTYPE_RIP_PEER. |
| |
| 2000-01-15 Toshiaki Takada <takada@zebra.org> |
| |
| * memory.h (enum): Add MTYPE_OSPF_CRYPT_KEY. |
| |
| 2000-01-15 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * command.h (node_type ): Add MASC_NODE for masc. |
| |
| 2000-01-09 Wang Jianliang <wangjl@soim.net> |
| |
| * routemap.c (route_map_index_add): When route_map_index is not |
| empty and insert new item at the head, it can cause core dump. |
| Fix "if (index == map->head)" to "if (point == map->head). |
| (route_map_add_set): If there is an old set command, override old |
| set command with new one. |
| (route_map_index_delete): Use while() instead of for for() for |
| logical correctness. |
| |
| 1999-12-26 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * memory.h (enum): Add MTYPE_BGP_STATIC. |
| |
| 1999-12-23 Alex Zinin <zinin@amt.ru> |
| * zebra.h, zclient.*: dynamic int up/down message |
| support |
| |
| 1999-12-10 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * thread.c (thread_cancel_event): Add a function for clean up |
| events. |
| |
| 1999-12-09 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * dropline.c: Delete file. |
| dropline.h: Linewise. |
| |
| 1999-12-14 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * filter.c (access_list_filter_delete): Wrong pointer |
| access->master was pointed out after access is freed. I store |
| master value at the beginning of the function. |
| |
| 1999-12-08 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vty.c (exec_timeout): Change of VTY timeout affect to current |
| VTY connection. |
| (vty_accept): Instead of immediate exit() return -1. |
| |
| 1999-12-07 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vty.c (vty_configure_lock): Configuration lock function added. |
| Only one VTY can use CONFI_NODE at the same time. |
| |
| * log.c: Delete zvlog_* functions. Now zlog_* does the same |
| thing. |
| |
| * log.c (log_init): Function removed. |
| (log_close): Likewise. |
| (log_flush): Likewise. |
| (log_open): Likewise. |
| |
| * vty.c (terminal_monitor): Add new command. |
| (no_terminal_monitor): Likewise. |
| |
| * log.c (old_log): Function removed. |
| (old_log2): Likewise. |
| (old_log_warn): Likewise. |
| |
| 1999-12-04 Toshiaki Takada <takada@zebra.org> |
| |
| * command.c (cmd_ipv6_match): New function added. |
| (cmd_ipv6_prefix_match): Likewise. |
| |
| 1999-12-04 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * command.c (cmd_ipv6_match): |
| |
| * table.c: Delete #ifdef HAVE_MBGPV4. |
| |
| * prefix.h (struct prefix): Add safi member. |
| (struct prefix_ipv4): Likewise. |
| (struct prefix_ipv6): Likewise. |
| |
| 1999-12-04 Rumen Svobodnikov <rumen@linux.tu-varna.acad.bg> |
| |
| * memory.c (struct mstat): Revert to support MEMORY_LOG. |
| |
| 1999-11-25 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * version.h: Bump up to 0.81c for testing new kernel codes. |
| |
| 1999-11-21 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * thread.h (struct thread): Pthread support is disabled all |
| platform. |
| |
| 1999-11-21 Michael Handler <handler@sub-rosa.com> |
| |
| * Include <limits.h> and <strings.h> under SUNOS_5. |
| |
| 1999-11-21 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * sockunion.c (in6addr_cmp): Enclosed by #define HAVE_IPV6 |
| 1999-11-13 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * command.h (node_type ): Add BGP_IPV4_NODE and BGP_IPV6_NODE. |
| |
| 1999-11-12 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * command.c (disable): Add `disable' command. |
| |
| 1999-11-09 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * plist.c (vty_prefix_list_install): Add any check. |
| |
| 1999-11-04 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * command.h (node_type ): Add DUMP_NODE. |
| |
| 1999-11-03 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * smux.c: Change default SMUX oid to compatible with gated. |
| |
| 1999-10-30 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * if_rmap.c: New file added. |
| |
| * if_rmap.h: New file added. |
| |
| 1999-10-29 Alex Zinin <zinin@amt.ru> |
| |
| * hash.c: add hash_free() function |
| |
| 1999-10-25 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * hash.c (hash_clean): Add clean function. |
| |
| * plist.c (prefix_list_reset): Add reset function. |
| |
| * filter.c (access_list_reset): Add reset function. |
| |
| 1999-10-17 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * client.c: Merged with zclient.c. |
| * client.h: Merged with zclient.h. |
| |
| 1999-10-15 Jordan Mendelson <jordy@wserv.com> |
| |
| * md5.c: Imported from GNU C Library. |
| * md5-gnu.h: Likewise. |
| |
| 1999-10-15 Jochen Friedrich <jochen@scram.de> |
| |
| * smux.c (smux_getresp_send): SMUX_GETRSP codes improvement. |
| |
| 1999-10-06 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * smux.h: New file added. |
| |
| * snmp.c: Rename to smux.c. |
| |
| 1999-10-02 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * command.c (cmd_execute_command_strict): Filter ambious commands. |
| (cmd_filter_by_string): Change to return enum match_type. |
| |
| 1999-10-01 Toshiaki Takada <takada@zebra.org> |
| |
| * vty.c (vty_describe_fold): New function which does VTY |
| description line fold. |
| * vty.c (vty_describe_command): Set description column. |
| |
| 1999-09-30 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * plist.c (prefix_list_init_ipv4): VTY user interface is improved. |
| |
| 1999-09-26 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * command.c (cmd_filter_by_string): Fix bug of CMD_IPV4 and |
| CMD_IPV4_PREFIX check. Both return type must be exact_match. |
| |
| 1999-09-24 Toshiaki Takada <takada@zebra.org> |
| |
| * command.c (cmd_filter_by_completion), |
| (is_cmd_ambiguous): Check IPv4 address, IPv4 prefix and range |
| parameter matches range. |
| |
| 1999-09-22 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * routemap.c (route_map_apply): Returm RM_DENYMATCH when no match |
| is performed. |
| |
| 1999-09-21 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vty.c (vty_read): Control-C stop VTY_MORE mode. |
| |
| 1999-09-20 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * command.h (node_type ): Add ACCESS_IPV6_NODE and |
| PREFIX_IPV6_NODE. |
| |
| * distribute.h: New file added. |
| |
| * command.h (node_type ): Delete DISTRIBUTE_NODE. |
| |
| 1999-09-18 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vty.c (vty_terminate_all): New function added for reload |
| support. |
| |
| 1999-09-06 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * memory.h (enum): Add new type MTYPE_OSPF_EXTERNAL_ROUTE. |
| |
| 1999-08-31 Janos Farkas <chexum@shadow.banki.hu> |
| |
| * vty.c (vty_read): Handle also 0x7f (alt-backspace), just like |
| esc-ctrl-h (delete word backwards). |
| |
| 1999-08-24 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * if.h: Add if_nametoindex for NRL. |
| |
| 1999-08-23 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * if.c (if_create): New function. |
| |
| 1999-08-22 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * snmp.c: New file. |
| |
| 1999-08-21 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * stream.c (stream_put): stream_memcpy () is changed to stream_put |
| (). stream_get () is added. |
| |
| 1999-08-18 Toshiaki Takada <takada@zebra.org> |
| |
| * memory.h (enum): Add MTYPE_OSPF_LSA_DATA. |
| |
| 1999-08-18 Yasuhiro Ohara <yasu@sfc.wide.ad.jp> |
| |
| * table.c (route_table_finish): add function frees table. |
| |
| 1999-08-12 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * memory.h (enum): Add MTYPE_RTADV_PREFIX. |
| |
| 1999-08-11 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * if.h (struct interface ): hw_address, hw_address_len added. |
| |
| 1999-08-10 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * if.h (struct interface ): Change structure member if_data to |
| info, index to ifindex. |
| |
| 1999-08-08 Rick Payne <rickp@rossfell.co.uk> |
| |
| * routemap.c: Multi protocol route-map modification. |
| |
| * routemap.c (route_map_apply): Route match process bug is fixed. |
| |
| 1999-08-05 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * thread.c (thread_fetch): When signal comes, goto retry point. |
| |
| 1999-08-04 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * Makefile.am: Add sockopt.c and sockopt.h |
| * sockopt.c: New file. |
| * sockopt.h: New file. |
| |
| 1999-08-02 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * version.h (ZEBRA_VERSION): Release zebra-0.75 |
| |
| 1999-08-01 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * memory.h (enum): Add MTYPE_RIPNG_AGGREGATE. |
| |
| 1999-07-31 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * sockunion.h: Add sockunion_getpeername (). |
| |
| 1999-07-27 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * version.h: Release zebra-0.74 |
| |
| 1999-07-26 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * command.h (struct host): Delete lines from struct host. Add |
| lines to struct vty. |
| |
| * command.c: Delete `lines LINES'. Terminal display line settings |
| should be done by `terminal length' command. |
| |
| 1999-07-24 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * memory.h (enum): MTYPE_OSPF_PATH are added. |
| |
| 1999-07-22 Toshiaki Takada <takada@zebra.org> |
| |
| * memory.h (enum): MTYPE_OSPF_NEXTHOP is added. |
| |
| 1999-07-21 Toshiaki Takada <takada@zebra.org> |
| |
| * linklist.c (list_add_node_prev), (list_add_node_next), |
| (list_add_list): New function added. |
| |
| * table.c (route_table_free): New function added. |
| |
| 1999-07-21 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * plist.c (config_write_prefix): Set write flag when configuration |
| is written. |
| |
| 1999-07-15 Yasuhiro Ohara <yasu@sfc.wide.ad.jp> |
| |
| * prefix.c : prefix_cmp() added. change apply_mask() to |
| apply_mask_ipv4(), and new apply_mask() added. |
| |
| 1999-07-14 Yasuhiro Ohara <yasu@sfc.wide.ad.jp> |
| |
| * prefix.c (prefix2str): append prefixlen. |
| |
| 1999-07-13 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * command.c (config_terminal): Change "config terminal" to |
| "configure terminal". Reported by Georg Hitsch |
| <georg@atnet.at>. |
| (config_terminal_length): `terminal length <0-512>' is added. At |
| this moment this command is only usef for vty interface. |
| Suggested by Georg Hitsch <georg@atnet.at>. |
| |
| 1999-07-12 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * routemap.c (rulecmp): Add wrapper function of strcmp. |
| |
| 1999-07-08 Rick Payne <rickp@rossfell.co.uk> |
| |
| * sockunion.c (inet_aton): Fix bug of inet_aton. |
| |
| 1999-07-08 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * version.h (ZEBRA_VERSION): Start zebra-0.73 |
| |
| 1999-07-06 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * version.h: Bump up to 0.72. |
| |
| 1999-07-05 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * command.c (install_default): New function for install default |
| commands to the node. |
| |
| * memory.h (enum): MTYPE_NEXTHOP is added. |
| |
| 1999-07-01 <kunihiro@zebra.org> |
| |
| * command.c (no_banner_motd): `no banner motd' command added. |
| |
| 1999-06-30 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * regex.c: Update to glibc-2.1.1's posix/regex.c |
| |
| * regex-gnu.h: Update to glibc-2.1.1's posix/regex.h |
| |
| * prefix.h (IPV4_ADDR_SAME): Macro added. |
| (IPV6_ADDR_SAME): Likewise. |
| |
| 1999-06-29 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * memory.h (enum): Add MTYPE_OSPF_VERTEX |
| |
| * version.h: Bump up to 0.71. |
| |
| * vty.c (vty_serv_sock_addrinfo): Use addrinfo function to bind |
| VTY socket when IPv6 is enabled. |
| |
| 1999-06-28 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vty.c (vty_serv_sock): Change vty_serv_sock determine which |
| address family to bind. |
| |
| * command.c: Add quit command. |
| |
| 1999-06-26 NOGUCHI kay <kay@dti.ad.jp> |
| |
| * vty.c (vty_read_config): Fix bug of configuration file path |
| detection. |
| |
| 1999-06-25 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * version.h: Bump up to 0.70. |
| |
| 1999-06-17 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * buffer.h (GETL): Remove GETL macro. |
| |
| * version.h: Bump up to 0.69. |
| |
| 1999-06-14 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * if.c (connected_add): Commented out connected_log. |
| |
| 1999-06-13 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * command.h (struct cmd_element ): strvec and descvec is combined |
| into newstrvec. |
| |
| * command.c (desc_make): Function removed. |
| (desc_next): Function removed. |
| |
| * command.h (struct cmd_element ): docvec is removed from struct |
| cmd_element. |
| |
| 1999-06-12 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * command.c (cmd_execute_command): Remove command NULL check. |
| |
| * command.h (struct cmd_element ): Add newstrvec entry to struct |
| cmd_element. |
| (DEFUN2): DEFUN2 macro is removed. DEFUN is extended to support |
| (a|b|c) statement. |
| (DESC): DESC macro is removed. |
| |
| * vty.c (vty_complete_command): When return value is |
| CMD_ERR_NO_MATCH, don't display error message. |
| |
| 1999-06-08 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * table.c (route_next_until): New function. |
| |
| * version.h: Bump up to 0.68. |
| |
| 1999-06-06 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vty.c (vty_close): Free vty->buf when vty is closed. |
| |
| * memory.h (enum): Add MTYPE_COMMUNITY_ENTRY and |
| MTYPE_COMMUNITY_LIST. |
| |
| * vty.h (struct vty ): Change buf from static length buffer to |
| variable length buffer. |
| |
| * vty.c (vty_ensure): New function added. |
| |
| 1999-06-04 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * command.h (node_type ): Add COMMUNITY_LIST_NODE. |
| |
| * command.c (config_enable_password): Freeing host.enable bug is |
| fixed. |
| (config_enable_password): Add argc count check. |
| |
| 1999-05-31 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * version.h: Bump up to 0.67. |
| |
| 1999-05-30 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * command.c (zencrypt): New function for encrypt password. |
| |
| * command.h (struct host): Add password_encrypt and |
| enable_encrypt. |
| |
| 1999-05-30 Jochen Friedrich <jochen@scram.de> |
| |
| * command.h (struct host): New member encrypt is added for |
| encrypted password. |
| |
| 1999-05-30 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vty.c: Remove all_digit_check function. Instead use all_digit. |
| |
| * prefix.c (all_digit): New function for checking string is made |
| from digit character. |
| |
| 1999-05-25 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * Makefile.am (libzebra_a_SOURCES): Add zclient.c. |
| (noinst_HEADERS): Add zclient.h |
| |
| * zclient.[ch]: New file for zebra client routine. |
| |
| * memory.h (enum): Add MTYPE_ZEBRA. |
| |
| 1999-05-19 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * version.h (ZEBRA_VERSION): Update to 0.66. |
| |
| 1999-05-15 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * buffer.h (GETC,GETW): Macro deleted. |
| |
| 1999-05-15 Carlos Alberto Barcenilla <barce@frlp.utn.edu.ar> |
| |
| * prefix.h (IPV4_NET0, IPV4_NET127): Macro added. |
| |
| 1999-05-15 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vty.c (service_advanced_vty): New command added. |
| (no_service_advanced_vty): Likewise. |
| |
| 1999-05-14 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vty.c (vty_auth): If advanced flag is set and enable password is |
| not set, directly login to the ENABLE_NODE. This feature is |
| originally designed and implemented by Stephen R. van den Berg |
| <srb@cuci.nl>. |
| |
| * command.h (host): Add advanced flag to struct host for advanced |
| vty terminal interface. |
| |
| * version.h (ZEBRA_VERSION): Update to 0.65 for next beta release. |
| |
| 1999-05-14 Stephen R. van den Berg <srb@cuci.nl> |
| |
| * command.h (node_type ): Add TABLE_NODE. |
| |
| * vty.c (vty_telnet_option): Check host.lines value. |
| |
| * command.c (config_lines): DEFUN for 'lines LINES' command. |
| |
| * zebra.h: Include <sys/utsname.h> for uname(). |
| (RT_TABLE_MAIN): Defined as 0 if OS does not support multiple |
| routing table. |
| |
| * vty.c (vty_auth): Directly login to the ENABLE_NODE when enable |
| password is not set. |
| (vty_prompt): Get machine's hostname when hostname is not set. |
| |
| 1999-05-11 James Willard <james@whispering.org> |
| |
| * command.c (config_exit): Close connection when `exit' command is |
| executed at ENABLE_NODE. |
| |
| 1999-05-10 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vty.c (vty_stop_input): `C-c' key change node to ENABLE_NODE. |
| |
| * command.c (cmd_execute_command_strict): Matched command size |
| check added. |
| (cmd_make_desc_line): New function for DEFUN2. |
| |
| * command.h (struct cmd_element ): Add descsize. |
| |
| 1999-05-09 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * command.h (struct cmd_element ): Remame descvec to docvec. |
| (struct cmd_element ): Add descvec for new description system. |
| |
| * command.c (desc_make): Check cmd->descvec. |
| |
| 1999-05-06 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * memory.h (enum): Add MTYPE_CLUSTER, MTYPE_CLUSTER_VAL. |
| |
| 1999-05-05 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * version.h (ZEBRA_VERSION): Bump up to 0.64 for next beta |
| release. |
| |
| 1999-05-04 Yasuhiro Ohara <yasu@sfc.wide.ad.jp> |
| |
| * linklist.c (list_delete_all_node): bug fix. |
| previous code loses current position when node |
| is deleted. |
| |
| 1999-05-03 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * command.h (DESC): Macro added. |
| (struct cmd_element2): Delete struct cmd_element2. |
| |
| * plist.c (prefix_list): Sequential number option check is added. |
| |
| 1999-05-02 Yasuhiro Ohara <yasu@sfc.wide.ad.jp> |
| |
| * log.c (zvlog_{debug,info,notice,warn,err}): have been |
| added. now we can log both console and file, but still |
| need some fix about config write. |
| |
| 1999-05-02 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * log.c (zvlog_debug): Fix yasu's change. |
| |
| 1999-05-01 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * plist.c (prefix_list): Fix typo. |
| |
| 1999-04-30 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * Set version to 0.63 for first beta package. |
| |
| 1999-04-27 Carlos Barcenilla <barce@frlp.utn.edu.ar> |
| |
| * prefix.c (str2prefix_ipv4): Fix prefix length check. |
| (str2prefix_ipv6): Likewise. |
| |
| 1999-04-25 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * memory.h (enum): Add MTPYE_PREFIX_LIST and |
| MTYPE_PREFIX_LIST_ENTRY. |
| |
| * command.h (node_type ): Add PREFIX_NODE. |
| |
| 1999-04-25 Carlos Barcenilla <barce@frlp.utn.edu.ar> |
| |
| * command.c: ALIAS (config_write_memory_cmd) and ALIAS |
| (copy_runningconfig_startupconfig_cmd) is added. |
| |
| * table.c (route_node_lookup): Unused match variable deletion. |
| |
| 1999-04-24 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * Makefile.am (libzebra_a_SOURCES): plist.c added. |
| (noinst_HEADERS): plist.h added. |
| |
| * plist.c, plist.h: New file added. |
| |
| * memory.h (enum): Rename MTYPE_AS_PASN to MTYPE_AS_STR. |
| * memory.c: Likewise. |
| |
| 1999-04-19 Carlos Alberto Barcenilla <barce@frlp.utn.edu.ar> |
| |
| * command.c (show_version): `show version' command added. |
| |
| 1999-04-19 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * prefix.c (str2prefix_ipv6): Prefix length overflow check. |
| |
| 1999-04-19 Carlos Alberto Barcenilla <barce@frlp.utn.edu.ar> |
| |
| * prefix.c (str2prefix_ipv4): Prefix length overflow check. |
| |
| 1999-04-19 Alex Bligh <amb@gxn.net> |
| |
| * prefix.c (sockunion2hostprefix): Function added. |
| (sockunion2prefix): Address family was not set. Now it is set. |
| |
| * vty.c: VTY access-class command is added. |
| |
| 1999-04-18 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * memory.c: Change xmalloc to zmalloc. xcalloc, xrealloc, xfree, |
| xstrdup are likewise. |
| |
| 1999-04-18 Yasuhiro Ohara <yasu@sfc.wide.ad.jp> |
| |
| * thread.c: Add thread_execute for other routing daemon. |
| OSPF tasks need to be generated by "sheduled" and "executed". |
| |
| 1999-04-13 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * buffer.c: Rewrite buffer_write and buffer_flush related |
| functions for fixing bugs. Reason of the problem and fix is |
| suggested by Alex Bligh <amb@gxn.net>. |
| |
| 1999-04-12 Alex Bligh <amb@gxn.net> |
| |
| * command.c (cmd_entry_function_descr): Added for variable |
| argument help display. |
| |
| 1999-04-07 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * regex.c, regex-gnu.h: Imported from GNU sed-3.02 distribution. |
| |
| 1999-03-24 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * stream.c: stream_fifo_free bug is fixed. |
| |
| 1999-03-19 Toshiaki Takada <takada@zebra.org> |
| |
| * stream.c (stream_strncpy): Added for getting any length bytes |
| from stream. |
| |
| 1999-03-16 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * version.h (ZEBRA_BUG_ADDRESS): New macro added. |
| |
| 1999-03-14 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * buffer.c (buffer_flush_window): If ep is same as buffer's size |
| length and lp is overrun one octet. |
| |
| 1999-03-13 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vty.h: add VTY's timeout function. |
| |
| 1999-03-05 <kunihiro@zebra.org> |
| |
| * command.h (node_type ): Add OSPF6_node. |
| |
| 1999-03-04 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * zebra.h: Check HAVE_SYS_SELECT_H when include <sys/select.h> |
| |
| 1999-03-03 Jeroen Ruigrok/Asmodai <asmodai@wxs.nl> |
| |
| * zebra.h: Include <net/if_var.h> if it exists. |
| |
| 1999-03-02 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * getopt.[ch],getopt1.c: Sync with glibc-2.1. |
| |
| * log.c (zlog): Tempolary ZLOG_STDOUT feature added. |
| |
| * command.h: Include vector.h and vty.h |
| |
| 1999-02-25 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * routemap.h (struct route_map_rule_cmd): Add prefix arguemnt. |
| |
| * routemap.c (route_map_apply_index): Add prefix argument. |
| (route_map_apply): Likewise. |
| |
| * memory.h (enum): Add MTYPE_ROUTE_MAP_COMPILED. |
| |
| * stream.c: Add stream_fifo related functions. |
| |
| 1999-02-24 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * daemon.c: Return integer value. File descriptor close is added. |
| |
| * memory.h (enum): add MTYPE_OSPF_LSA. |
| |
| 1999-02-23 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * rsh.c: Remove empty file. |
| |
| 1999-02-22 <kunihiro@zebra.org> |
| |
| * routemap.c: Add add/delete hook to route_map_master. |
| |
| 1999-02-19 Peter Galbavy <Peter.Galbavy@knowledge.com> |
| |
| * str.[ch] added to supply wrappers for snprintf(), strlcat() and |
| strlcpy on system without these. |
| |
| 1999-02-18 Peter Galbavy <Peter.Galbavy@knowledge.com> |
| |
| * syslog support added |
| |
| 1999-02-02 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * filter.c (access_list_add_hook): added for hook function management. |
| * filter.c (access_list_delete_hook): Likewise. |
| |
| 1999-01-19 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * stream.c: New file. |
| * stream.h: New file. |
| * Divide stream related fucntions from buffer.[ch] into stream.[ch]. |
| |
| 1999-01-14 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * memory.h (enum): add MTYPE_STREAM, MTYPE_STREAM_DATA |
| |
| * buffer.c (stream_new): Set MTYPE_STREAM to XMALLOC argument. |
| |
| 1998-12-23 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * routemap.c: route_map_index_delete() added. |
| |
| 1998-12-22 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * buffer.c (buffer_empty): check cp instead of sp. |
| |
| 1998-12-17 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * radix.[ch]: Deleted. |
| |
| 1998-12-15 Magnus Ahltorp <map@stacken.kth.se> |
| |
| * buffer.c: Prototype fixes. |
| * prefix.c: Likewise. |
| * sockunion.c: Likewise. |
| * sockunion.h: Likewise. |
| |
| 1998-12-14 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vty.c (vty_read): DELETE key works as vty_delete_char. |
| |
| 1998-12-13 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * log.c (time_print): chane %y to %Y. |
| |
| 1998-12-10 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * distribute.c: new file. |
| |
| 1998-12-09 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * filter.c: Remove all of struct prefix_{ipv4,ipv6} and add |
| complete support of IPv6 access list. |
| |
| * command.c (config_write_element): function delete. |
| (config_write_host): function add. password and enable password |
| isn't printed to vty interface. |
| |
| 1998-12-08 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * filter.c: Change prefix_ipv4 to prefix and add support of |
| prefix_ipv6 filtering. |
| |
| 1998-12-07 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * Makefile.am (INCLUDES): add @INCLUDES@ for Linux IPv6 inet6-apps |
| header includes. |
| |
| 1998-12-05 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * log.c (log_flush): fix function name typo. |
| |
| 1998-12-04 Yasuhiro Ohara <yasu@sfc.wide.ad.jp> |
| |
| * memory.h: OSPF memory type is added. |
| |
| 1998-11-15 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * command.c (sort_node): add sort_node() for pretty printing of |
| command on vty interface. |
| (config_password): delete the restriction of charaster of password |
| string. |
| |
| 1998-09-05 Kunihiro Ishiguro <kunihiro@debian.zebra.org> |
| |
| * prefix.c (prefix_ipv4_any): add prefix_ipv4_any(). |
| |
| 1998-08-25 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * network.h: New file. |
| |
| 1998-08-24 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vty.c (vty_will_echo): function name change from vty_off_echo. |
| |
| 1998-08-18 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * buffer.h: add PUTC,PUTW,PUTL macros. |
| |
| 1998-07-22 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * route.[ch]: renamed to prefix.[ch] |
| |
| 1998-06-09 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * prefix_in, prefix_in6 is replaced by prefix_ipv4, prefix_ipv6. |
| |
| * Makefile.am: @INCLUDES@ is deleted from INCLUDES. |
| |
| 1998-06-07 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * host.[ch]: merged with command.[ch] |
| |
| 1998-05-08 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * Makefile.am (libzebra_a_SOURCES): add route.c to libzebra_a_SOURCES. |
| |
| 1998-05-07 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * route.c (str2prefix): str2prefix () is gone. |
| |
| 1998-05-03 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vty.c (vty_read_config): change CONDIR to SYSCONFDIR. |
| |
| * .cvsignore: add file. |
| |
| * memory.c (xerror): add arguent `type' and `size'. |
| |
| * socket.c: deleted. |
| |
| 1998-05-02 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vector.c: malloc,free,realloc -> XMALLOC,XFREE,XREALLOC. |
| * linklist.c: same as above. |
| |
| 1998-04-30 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * filter.[ch]: added. |
| |
| 1998-04-01 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vty.c (config_who): return CMD_SUCCESS |
| |
| 1998-04-01 Jochen Friedrich <jochen@scram.de> |
| |
| * table.c (route_dump_node): route_dump_node is IPv6 specific |
| function so move #ifdef to the end of route_dump_node (). |
| |
| 1998-03-05 "Hannes R. Boehm" <hannes@boehm.org> |
| |
| * if.c: DEFUN(interface_desc) added. |
| |
| 1998-03-05 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * if.c: separated from ripd/rip_interface.c |
| |
| 1998-03-04 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * thread.[ch] : added. |
| |
| 1998-02-14 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vty.c (vty_delete_char): fix size bug. |
| (vty_backward_pure_word): function added. |
| (vty_read): ESC + 'f' perform vty_forward_word. |
| (vty_read): ESC + 'b' perform vty_backward_word. |
| |
| 1998-02-11 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * radix.c (radix_lookup_rt): add mask check. |
| (radix_delete_duproute): add mask check. |
| |
| 1998-02-10 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * command.c (config_write_file): fix vty -> file_vty. |
| |
| 1998-02-06 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * command.c (cmd_filter_ambiguous): add complex type treatment. |
| |
| 1998-02-05 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vty.c (vty_time_print): function added. |
| (vty_complete_command): now [...] element isn't shown by completion. |
| |
| 1998-01-26 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * command.c : change from cmd_install_node() to install_node(). |
| |
| 1998-01-16 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * route.[ch]: struct rt{} is replaced by struct prefix{}. |
| |
| 1998-01-06 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * command.c (cmd_execute_command): check command length. |
| |
| * timer.c (zebra_timer_set): add zebra_timer_set. |
| |
| 1998-01-05 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * command.h (node_type ): add ZEBRA_NODE. |
| |
| * command.c (config_exit): add RIP_NODE. |
| (config_write_file): add RIP_NODE. |
| |
| 1998-01-04 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * print_version.c (print_version): Now Copyright is 1996-1998. |
| |
| * sockunion.c (sockunion_log): moved from ../zebra/route.c |
| |
| 1997-12-30 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * host.c (config_logfile): change 'log PATH' to 'logfile PATH'. |
| |
| * sockunion.c (sockunion_sameprefix): add same prefix for |
| sockunion. |
| |
| 1997-12-29 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * radix.[ch] : are moved from ../zebra directroy. |
| |
| * command.c (config_from_file): if command execution failed down |
| level to CONFIG_NODE. |
| |
| * host.c: config_log function which enable 'log FILENAME' command. |
| |
| 1997-12-23 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vty.c: add vty_transpose_chars (). Now you can use '^T' to |
| transpose character. |
| |
| * command.c: cmd_cmdsize add, this is useful to check incomplete |
| command. |
| |
| 1997-12-07 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * fd.h: add family for address family |
| |
| 1997-12-06 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * command.o |
| * vty.o |
| * host.o is moved from ../zebra |
| |
| 1997-08-14 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * make library directory. |
| |