| 2007-03-21 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * Makefile.am: Patch rule for draft-zebra-00.txt to work |
| in VPATH build environments. |
| |
| 2006-07-28 Paul Jakma <paul.jakma@sun.com> |
| |
| * main.texi: link-detect works on Solaris too. |
| * ospfd.texi: Twiddle around with anchors a bit more. |
| Clarify how setting MD5 auth by area and by interface interact, |
| and add cross-references, as well as to the required |
| command for setting key material. |
| |
| 2006-07-27 Paul Jakma <paul.jakma@sun.com> |
| |
| * quagga.texi: Remove unused index definitions |
| Add an Index node - for the concept index. |
| * routeserver.texi: Set exampleindex to 0, so the example configs |
| with long IPv6 addresses stand better chance of fitting. |
| * overview.texi: 'Supported RFC' -> 'Supported RFCs' |
| Remove paragraph indentation - texinfo does that. |
| Revise the supported OS list slightly. |
| Remove the IPv6 stack list, seems very dated and irrelevant. |
| Revise the 'How to get Quagga' section. |
| * ospfd.texi: minor tweaks: add some anchors, fix some minor |
| format issues. |
| Revise the help for 'abr-type'. |
| Note that text authentication is unwise, recc'd MD5. |
| Add some extra text for redistribute and passive-interface, |
| about how latter can substitute for redist connected. |
| |
| 2006-07-27 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * vtysh.1: Document new options -d and -E, and note that now multiple |
| -c options may be supplied, with embedded linefeed now supported. |
| In BUGS section, remove warning about vtysh causing a daemon |
| to freeze, since this has been fixed. |
| |
| 2006-07-04 Paul Jakma <paul.jakma@sun.com> |
| |
| * quagga.info: remove auto-generated file. It will still be |
| present in dist tarballs, so shouldn't affect anyone but |
| direct users of CVS. Required texinfo version should be |
| widely available. |
| |
| 2006-06-28 Erik Muller <erikm@internap.com> |
| |
| * ospfd.texi: Document new ospf router subcommand |
| "log-adjacency-changes [detail]". |
| |
| 2006-06-26 Paul Jakma <paul.jakma@sun.com> |
| |
| * ospfd.texi: Document that MD5 keyid is part of the protocol. |
| * bgpd.texi: shut texinfo warnings up by replacing brackets in |
| variable with angle brackets. |
| |
| 2006-05-23 Paul Jakma <paul.jakma@sun.com> |
| |
| * bgpd.texi: Document the update-source command. |
| |
| 2006-05-10 Paul Jakma <paul.jakma@sun.com> |
| |
| * quagga.info: update auto-built file. |
| |
| 2006-05-08 Paul Jakma <paul.jakma@sun.com> |
| |
| * main.texi: --log_mode does not exist, remove, bug #245. |
| |
| 2006-05-04 Paul Jakma <paul.jakma@sun.com> |
| |
| * ripd.texi: Add Version Control as a distinct section. |
| Expand Version Control section with overview text, |
| touching on insecurity of RIPv1 and referencing |
| authentication section, cleanup text of various version |
| commands. |
| RIP Authentication: Add overview text, refer to RIPv1 version |
| control, which is required to completely secure RIP. |
| |
| 2006-03-31 Paul Jakma <paul.jakma@sun.com> |
| |
| * fig*.txt: New files, txt versions of the diagrammes for the |
| info file. |
| * protocol.texi: Document the new version 1 header. |
| * routeserver.texi: Explicitly specify scaling widths for the |
| figures, only way to make them look reasonable, sadly. |
| Try fix some formatting and explicitely note lists as being |
| bulleted. |
| * Makefile.am: convert seems to do png to pdf just fine. No |
| need for intermediate eps. |
| Add txt figure expansions and list as dependencies and |
| EXTRA_DIST files. |
| |
| 2006-02-19 Paul Jakma <paul.jakma@sun.com> |
| |
| * quagga.info: update auto-built file. |
| * ChangeLog: Fix old, existing entry for snmptrap.texi addition to |
| credit the author, who got in touch with me. |
| * snmptrap.texi: Add comment line with author's details. |
| |
| 2006-01-19 Paul Jakma <paul.jakma@sun.com> |
| |
| * quagga.info: update auto-built file. |
| |
| 2005-11-25 Paul Jakma <paul.jakma@sun.com> |
| |
| * texinfo.tex: update to newer version, seems to now properly |
| scale the diagramme images in PDF output. |
| |
| 2005-11-11 Paul Jakma <paul.jakma@sun.com> |
| |
| * quagga.info: update auto-built file. Methinks it's time to |
| remove from CVS.. |
| |
| 2005-11-07 Paul Jakma <paul.jakma@sun.com> |
| |
| * Makefile.am: snmptrap.texi needs to be listed as a source, |
| not disted otherwise. |
| |
| 2005-11-04 Jeroen Simonetti <jsimonetti@denit.net> |
| |
| * snmptrap.texi: Documentation on configuring SNMP for logging |
| traps. |
| |
| 2005-11-04 Paul Jakma <paul.jakma@sun.com> |
| |
| * snmp.texi: Minor formatting changes. |
| * quagga.info: Update auto-built file |
| * ospf6d.texi: Add example config |
| * bgpd.tex: Add example configs. Couple of cleanups of format |
| and macros. |
| * routemap.texi: Add an explanation of how route-maps work. |
| Document the call and exit-policy commands. |
| |
| 2005-10-29 Paul Jakma <paul@dishone.st> |
| |
| * ospfd.texi: Document the new spf and max-metric commands, and |
| the additional form of dead-interval. Add documentation for |
| various other commands. Cleanup misc stuff, citations, etc. |
| Add some example configurations. |
| * overview.texi: RFC3137 support added. |
| * Makefile.am: Make quagga.pdf depend on the _TEXINFOS |
| variable, this still doesn't fix the dependency though, |
| sadly. |
| |
| 2005-10-11 Paul Jakma <paul@dishone.st> |
| |
| * quagga.texi: Rejiggle the copyright sections a bit, seems to |
| make makeinfo happier and generates info pages again on FC4. |
| * quagga.info: Update this auto-built file. |
| |
| 2005-04-29 Paul Jakma <paul@dishone.st> |
| |
| * defines.texi.in: Add PACKAGE_NAME, PACKAGE_STRING. |
| * quagga.texi: Use PACKAGE_NAME, this is more to give me an excuse |
| to update quagga.texi so that the 'UPDATED' in version.texi will |
| be more recent, the Makefile seems to be dumb and not examine |
| the texi files from which quagga.texi is generated. |
| * quagga.info: Fresh copy to match updates. |
| |
| 2005-04-28 Paul Jakma <paul@dishone.st> |
| |
| * quagga.info: updated |
| * Makefile.am: automake seems to depend doc built stuff on srcdir |
| for some reason, or maybe its cause we have quagga.info, |
| quagga.texi in CVS - not sure. Anyway, the static rule for |
| quagga.pdf should depend on the srcdir quagga.texi in that case. |
| |
| 2005-04-22 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * bgpd.8,isisd.8,ospf6d.8,ospfd.8,ripd.8,ripngd.8,zebra.8: Fix |
| spelling mistake: idenifier -> identifier. |
| |
| 2005-04-22 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * bgpd.8,isisd.8,ospf6d.8,ospfd.8,ripd.8,ripngd.8,zebra.8: Fix |
| spelling mistake: intrefaces -> interfaces. |
| |
| 2005-04-10 Paul Jakma <paul@dishone.st> |
| |
| * quagga.info: Update to match bgpd.texi addition |
| |
| 2005-04-08 Hasso Tepper <hasso at quagga.net> |
| |
| * bgpd.texi: Document new "bgp bestpath as-path confed" command. |
| |
| 2005-04-05 Paul Jakma <paul@dishone.st> |
| |
| * Makefile.am: Get rid of built_sources. It causes them to be added |
| to dist, and the dist host can not generate the PDFs. |
| |
| 2005-04-02 Paul Jakma <paul@dishone.st> |
| |
| * fig{-{normal,rs}-processing,_topologies_{rs,full}}.dia: new |
| files, dia diagramme XML versions of the original corresponding |
| EPS encapsulated bitmaps. |
| * fig{-{normal,rs}-processing,_topologies_{rs,full}}.png: new |
| files, png exports by dia of the source dia diagrammes above. |
| * fig{-{normal,rs}-processing,_topologies_{rs,full}}.eps: removed, |
| replaced by above dia source. |
| * routeserver.texi: remove extension in image macros. |
| * quagga.info: updated build |
| * Makefile.am: Add rules to build eps (using 'convert'), png (using |
| dia). Add figures_BUILT_SOURCES to extra_dist to avoid the |
| dependency on dia :) (amongst other things) for dist users. |
| quagga_TEXINFOS should depend on figures_BUILT_SOURCES. |
| * .cvsignore: ignore eps files, built from sources |
| * Makefile.am: Urg, dont use automake _SOURCES, _BUILT_SOURCES |
| for figures, automake doesnt know anything about them. |
| |
| 2005-03-25 Jean-Mickael Guerin <jean-mickael.guerin@6wind.com> |
| * ipv6.texi: Add new commands for neighbor discovery |
| interface ipv6 nd prefix X:X::X:X/M router-address |
| interface ipv6 nd ra-interval msec |
| interface ipv6 nd home-agent-config-flag |
| interface ipv6 nd home-agent-lifetime |
| interface ipv6 nd home-agent-preference |
| interface ipv6 nd adv-interval-option |
| |
| 2005-02-03 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * basic.texi: Add note about last-resort crash logging to /var/tmp |
| when file logging is not configured. |
| * quagga.info: updated build of autogenerated file |
| |
| 2005-01-24 Paul Jakma <paul@dishone.st> |
| |
| * quagga.info: Version bump (autogenerated) |
| |
| 2005-01-10 Paul Jakma <paul@dishone.st> |
| |
| * texinfo.tex: Updated to a version which understands @{ and @} |
| * vtysh.texi: Add node name for @section |
| * quagga.info: updated build of autogenerated file |
| |
| 2005-01-07 Paul Jakma <paul@dishone.st> |
| |
| * quagga.info: Version bump (autogenerated) |
| |
| 2005-01-05 Paul Jakma <paul@dishone.st> |
| |
| * quagga.info: Version bump |
| |
| 2004-12-23 Paul Jakma <paul@dishone.st> |
| |
| * quagga.info: Version bump |
| |
| 2004-12-18 Hasso Tepper <hasso at quagga.net> |
| |
| * Makefile.am: Add isisd man page to the list. Should fix problem |
| isisd not included in release/snapshot tarballs. |
| |
| 2004-12-07 Andrew J. Schorr <ajschorr@alumni.princeton.edu> |
| |
| * basic.texi: Document new logging features. Separate basic config |
| commands from basic VTY commands. |
| |
| 2004-11-25 Hasso Tepper <hasso at quagga.net> |
| |
| * *.8: Document -g/--group command line switch and some small |
| cosmetical changes. |
| |
| 2004-11-22 Paul Jakma <paul@dishone.st> |
| |
| * bgpd.8: escape -/+ signs, reported by ESR to bug-zebra. |
| |
| 2004-11-19 Hasso Tepper <hasso at quagga.net> |
| |
| * Makefile.am: Don't remove quagga.info while cleaning up. |
| |
| 2004-11-15 Paul Jakma <paul@dishone.st> |
| |
| * routeserver.texi: Strip ctrl-M from line endings, note by |
| sigma@smx.pair.com |
| * quagga.info: Add generated file to CVS, as it requires most recent |
| texinfo to build, until such time as texinfo 4.7 is more |
| prevalent. |
| |
| 2004-11-08 Paul Jakma <paul@dishone.st> |
| |
| * Makefile.am: Add routeserver.texi to quagga_TEXINFOS. |
| Add quagga.info to clean files list (would have thought automake |
| would have done this, but it doesnt seem to) |
| |
| 2004-11-07 Paul Jakma <paul@dishone.st> |
| |
| * quagga.texi: include routeserver.texi. TODO: integrate the current |
| multiple-instance orientated bgpd route-server section with the |
| new route-server docs. |
| |
| 2004-11-07 Paul Jakma <paul@dishone.st> |
| |
| * Makefile.am: Add automatic rule to build pdf's from eps figures. |
| Clean *.pdf. Add rule for quagga.pdf (as the eps.pdf pattern |
| probably otherwise will override automake's rule for quagga.pdf) |
| * overview.texi: URL was causing TeX overfull, put on newline. |
| * quagga.texi: Put the copyright notice into @copying section, as |
| is proper. Strip trailling space from the main menu lines. |
| * rip(ng)?d.texi: Minor reformatting. |
| * Add the route server docs. |
| * bgpd.texi: remove unneeded page breaks. The 6Bone example |
| overflows though. |
| * routeserver.texi: new file, texinfo'fied and slightly modified |
| version of the original TeX from James Luis Rubio. |
| * fig-*.eps: new files, diagrammes. |
| |
| 2004-11-06 Paul Jakma <paul@dishone.st> |
| |
| * defines.texi.in: New file, texi variables should be set here, |
| autoconf substitution is available. Define common AUTHORS, |
| COPYRIGHT_YEAR and COPYRIGHT_STR vars. |
| * (global): Make use of makeinfo node pointer auto-creation |
| to avoid having to fully specify links for nodes, so we only have |
| to specify current node name - simplifies text slightly. |
| Remove extraneous newlines which appear to cause extra blank pages |
| to be added in output. |
| Update copyright strings which appear in various places to |
| use the new COPYRIGHT_STR texinfo variable. |
| Change url to uref, the former need not output an actual |
| hyperlink depending on version of texinfo, the latter should if |
| supported by the format (eg PDF). |
| * texinfo.tex: Update to a more recent version. previous file |
| was many many years old. This file should possibly be removed |
| altogether, and allowed to be installed by automake. |
| * quagga.texi: Make use of automake's version.texi feature to |
| have VERSION and some other vars auto-defined. include |
| defines.texi. Change copyright strings to use the COPYRIGHT_STR |
| variable. |
| * install.texi: Make the privs section an actual section. Ditto for |
| the Linux notes. |
| * overview.texi: Supply URL for Quagga, where format allows. Tidy up |
| one or two paragraphs slightly. |
| Update the section on supported platforms. |
| Remove the ZNOG list stuff, direct reader to the website for |
| further information on email lists. |
| * vtysh.texi: Update the integrated config file section. Make the |
| commands sections so correct PDF indexes are built. |
| |
| 2004-10-12 Hasso Tepper <hasso at quagga.net> |
| |
| * snmp.texi: ospf6d supports SNMP as well now. |
| |
| 2004-10-11 Hasso Tepper <hasso at quagga.net> |
| |
| * ospfd.8: Update manpage: add info about new -a/--apiserver command |
| line switch. |
| |
| 2004-10-11 Paul Jakma <paul@dishone.st> |
| |
| * ospfd.texi: reformat the ospf md5 paragraph, add an additional |
| way to work around bad clocks. |
| |
| 2004-10-03 Hasso Tepper <hasso at quagga.net> |
| |
| * vtysh.1: Update vtysh man page to reflect changes in shell. Remove |
| info about -f command line switch. |
| |
| 2004-09-11 Paul Jakma <paul@dishone.st> |
| |
| * quagga.texi: Update copyright. Contents should be at beginning |
| of docs... |
| |
| 2004-09-11 Paul Jakma <paul@dishone.st> |
| |
| * ospfd.texi: OSPF MD5 auth requires stable time. |
| |
| 2004-08-31 Hasso Tepper <hasso at quagga.net> |
| |
| * zebra.8: Document -s/--nl-bufsize command line switch. |
| |
| 2004-08-27 Hasso Tepper <hasso at quagga.net> |
| |
| * Update vtysh man page to reflect changes in shell. |
| |
| 2004-08-10 Hasso Tepper <hasso at quagga.net> |
| |
| * Updated man pages. |
| * Removed vty commands section from all man pages. This inf belongs to |
| Info pages. |
| * Added isisd man page. |
| |
| 2004-07-31 Christian Hammers <ch@lathspell.de> |
| |
| * snmp.texi: update (completely rewritten almost) |
| |
| 2004-06-30 Greg Troxel <gdt@poblano.ir.bbn.com> |
| |
| * Makefile.am (EXTRA_DIST): Add files in mpls explicitly, to avoid |
| copying CVS files, per the automake manual's recommendations. |
| |
| 2004-05-27 Paul Jakma <paul@dishone.st> |
| |
| * Correct RIP port, s/521/520/, reported by xantius@xantius.com |
| |
| 2003-11-27 Hasso Tepper <hasso@estpak.ee> |
| |
| * Added -A and -u descriptions to the man pages. |
| |
| 2003-01-22 Christian Hammers <ch@westend.com> |
| |
| * ospfd.texi (OSPF router, OSPF router): Add description. |
| |
| 2002-07-07 Kunihiro Ishiguro <kunihiro@ipinfusion.com> |
| |
| * zebra-0.93 released. |
| |
| 2001-02-07 Pekka Savola <pekkas@netcore.fi> |
| |
| * Correct bad English ;-). |
| |
| 2001-02-01 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * zebra-0.91 released. |
| |
| 2001-01-09 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * zebra-0.90 released. |
| |
| 2000-10-02 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * zebra-0.89 released. |
| |
| 2000-10-02 Horms <horms@vergenet.net> |
| |
| * Makefile.am: Fix texinfo file installation problem. |
| |
| 2000-08-17 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * zebra-0.88 released. |
| |
| * ospfd.texi (Redistribute routes to OSPF): distance <1-255> |
| @var{source} command is temporary disabled. So it is removed from |
| document. |
| |
| 2000-07-04 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * vtysh.1: Add man entry for vtysh. |
| |
| * bgpd.1: Change section to 8. |
| * ospfd.1: Likewise. |
| * ospf6d.1: Likewise. |
| * ripd.1: Likewise. |
| * ripngd.1: Likewise. |
| * zebra.1: Likewise. |
| |
| 1999-09-01 "A.Waddington" <waddington@usa.net> |
| |
| * zebra.texi: Replace @command with @code until it gets ready. |
| Remove @macro. |
| |
| 1999-08-26 Andrew Waddington <waddington@usa.net> |
| |
| * bgpd.1: Add man page. |
| ospf6d.1: Likewise. |
| ospfd.1: Likewise. |
| ripd.1: Likewise. |
| ripngd.1: Likewise. |
| zebra.1: Likewise. |
| |
| 1999-08-14 Andrew Waddington <waddington@usa.net> |
| |
| * zebra.texi: Many typo is fixed. Some grammatical rectifications |
| is made. |
| |
| 1999-07-27 Gerhard Poul <gpoul@gnu.org> |
| |
| * zebra.texi: Update zebra.texi. |
| |
| 1999-07-02 Gerhard Poul <gpoul@gnu.org> |
| |
| * draft-zebra-00.ms: New file added. This is groff version of |
| draft-zebra-00.txt. This is a master file of draft-zebra-00.txt. |
| |
| * draft-zebra-00.txt: Generated from draft-zebra-00.txt. |
| |
| 1999-05-07 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * zebra.texi (Top): Add ospf6d chapter. |
| |
| 1999-03-31 Jeroen Ruigrok/Asmodai <asmodai@wxs.nl> |
| |
| * zebra.texi: Improve some sections. |
| |
| 1999-03-04 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * archfig.tex, zebra.sty, zebra.tex: Temporary removed due to the |
| description is out of date. |
| |
| 1999-02-24 Kunihiro Ishiguro <kunihiro@zebra.org> |
| |
| * texinfo.tex: New file added. Automake complains the absence of |
| texinfo.tex. |