| /* OSPF VTY interface. |
| * Copyright (C) 2005 6WIND <alain.ritoux@6wind.com> |
| * Copyright (C) 2000 Toshiaki Takada |
| * |
| * This file is part of GNU Zebra. |
| * |
| * GNU Zebra is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2, or (at your option) any |
| * later version. |
| * |
| * GNU Zebra is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with GNU Zebra; see the file COPYING. If not, write to the Free |
| * Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA |
| * 02111-1307, USA. |
| */ |
| |
| #include <zebra.h> |
| |
| #include "memory.h" |
| #include "thread.h" |
| #include "prefix.h" |
| #include "table.h" |
| #include "vty.h" |
| #include "command.h" |
| #include "plist.h" |
| #include "log.h" |
| #include "zclient.h" |
| |
| #include "ospfd/ospfd.h" |
| #include "ospfd/ospf_asbr.h" |
| #include "ospfd/ospf_lsa.h" |
| #include "ospfd/ospf_lsdb.h" |
| #include "ospfd/ospf_ism.h" |
| #include "ospfd/ospf_interface.h" |
| #include "ospfd/ospf_nsm.h" |
| #include "ospfd/ospf_neighbor.h" |
| #include "ospfd/ospf_flood.h" |
| #include "ospfd/ospf_abr.h" |
| #include "ospfd/ospf_spf.h" |
| #include "ospfd/ospf_route.h" |
| #include "ospfd/ospf_zebra.h" |
| /*#include "ospfd/ospf_routemap.h" */ |
| #include "ospfd/ospf_vty.h" |
| #include "ospfd/ospf_dump.h" |
| |
| |
| static const char *ospf_network_type_str[] = |
| { |
| "Null", |
| "POINTOPOINT", |
| "BROADCAST", |
| "NBMA", |
| "POINTOMULTIPOINT", |
| "VIRTUALLINK", |
| "LOOPBACK" |
| }; |
| |
| |
| /* Utility functions. */ |
| static int |
| ospf_str2area_id (const char *str, struct in_addr *area_id, int *format) |
| { |
| char *endptr = NULL; |
| unsigned long ret; |
| |
| /* match "A.B.C.D". */ |
| if (strchr (str, '.') != NULL) |
| { |
| ret = inet_aton (str, area_id); |
| if (!ret) |
| return -1; |
| *format = OSPF_AREA_ID_FORMAT_ADDRESS; |
| } |
| /* match "<0-4294967295>". */ |
| else |
| { |
| if (*str == '-') |
| return -1; |
| errno = 0; |
| ret = strtoul (str, &endptr, 10); |
| if (*endptr != '\0' || errno || ret > UINT32_MAX) |
| return -1; |
| |
| area_id->s_addr = htonl (ret); |
| *format = OSPF_AREA_ID_FORMAT_DECIMAL; |
| } |
| |
| return 0; |
| } |
| |
| |
| static int |
| str2metric (const char *str, int *metric) |
| { |
| /* Sanity check. */ |
| if (str == NULL) |
| return 0; |
| |
| *metric = strtol (str, NULL, 10); |
| if (*metric < 0 && *metric > 16777214) |
| { |
| /* vty_out (vty, "OSPF metric value is invalid%s", VTY_NEWLINE); */ |
| return 0; |
| } |
| |
| return 1; |
| } |
| |
| static int |
| str2metric_type (const char *str, int *metric_type) |
| { |
| /* Sanity check. */ |
| if (str == NULL) |
| return 0; |
| |
| if (strncmp (str, "1", 1) == 0) |
| *metric_type = EXTERNAL_METRIC_TYPE_1; |
| else if (strncmp (str, "2", 1) == 0) |
| *metric_type = EXTERNAL_METRIC_TYPE_2; |
| else |
| return 0; |
| |
| return 1; |
| } |
| |
| int |
| ospf_oi_count (struct interface *ifp) |
| { |
| struct route_node *rn; |
| int i = 0; |
| |
| for (rn = route_top (IF_OIFS (ifp)); rn; rn = route_next (rn)) |
| if (rn->info) |
| i++; |
| |
| return i; |
| } |
| |
| |
| DEFUN (router_ospf, |
| router_ospf_cmd, |
| "router ospf", |
| "Enable a routing process\n" |
| "Start OSPF configuration\n") |
| { |
| vty->node = OSPF_NODE; |
| vty->index = ospf_get (); |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (no_router_ospf, |
| no_router_ospf_cmd, |
| "no router ospf", |
| NO_STR |
| "Enable a routing process\n" |
| "Start OSPF configuration\n") |
| { |
| struct ospf *ospf; |
| |
| ospf = ospf_lookup (); |
| if (ospf == NULL) |
| { |
| vty_out (vty, "There isn't active ospf instance%s", VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| ospf_finish (ospf); |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (ospf_router_id, |
| ospf_router_id_cmd, |
| "ospf router-id A.B.C.D", |
| "OSPF specific commands\n" |
| "router-id for the OSPF process\n" |
| "OSPF router-id in IP address format\n") |
| { |
| struct ospf *ospf = vty->index; |
| struct in_addr router_id; |
| int ret; |
| |
| ret = inet_aton (argv[0], &router_id); |
| if (!ret) |
| { |
| vty_out (vty, "Please specify Router ID by A.B.C.D%s", VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| ospf->router_id_static = router_id; |
| |
| ospf_router_id_update (ospf); |
| |
| return CMD_SUCCESS; |
| } |
| |
| ALIAS (ospf_router_id, |
| router_ospf_id_cmd, |
| "router-id A.B.C.D", |
| "router-id for the OSPF process\n" |
| "OSPF router-id in IP address format\n") |
| |
| DEFUN (no_ospf_router_id, |
| no_ospf_router_id_cmd, |
| "no ospf router-id", |
| NO_STR |
| "OSPF specific commands\n" |
| "router-id for the OSPF process\n") |
| { |
| struct ospf *ospf = vty->index; |
| |
| ospf->router_id_static.s_addr = 0; |
| |
| ospf_router_id_update (ospf); |
| |
| return CMD_SUCCESS; |
| } |
| |
| ALIAS (no_ospf_router_id, |
| no_router_ospf_id_cmd, |
| "no router-id", |
| NO_STR |
| "router-id for the OSPF process\n") |
| |
| static void |
| ospf_passive_interface_default (struct ospf *ospf, u_char newval) |
| { |
| struct listnode *ln; |
| struct interface *ifp; |
| struct ospf_interface *oi; |
| |
| ospf->passive_interface_default = newval; |
| |
| for (ALL_LIST_ELEMENTS_RO (om->iflist, ln, ifp)) |
| { |
| if (ifp && |
| OSPF_IF_PARAM_CONFIGURED (IF_DEF_PARAMS (ifp), passive_interface)) |
| UNSET_IF_PARAM (IF_DEF_PARAMS (ifp), passive_interface); |
| } |
| for (ALL_LIST_ELEMENTS_RO (ospf->oiflist, ln, oi)) |
| { |
| if (OSPF_IF_PARAM_CONFIGURED (oi->params, passive_interface)) |
| UNSET_IF_PARAM (oi->params, passive_interface); |
| /* update multicast memberships */ |
| ospf_if_set_multicast(oi); |
| } |
| } |
| |
| static void |
| ospf_passive_interface_update (struct ospf *ospf, struct interface *ifp, |
| struct in_addr addr, |
| struct ospf_if_params *params, u_char value) |
| { |
| u_char dflt; |
| |
| params->passive_interface = value; |
| if (params != IF_DEF_PARAMS (ifp)) |
| { |
| if (OSPF_IF_PARAM_CONFIGURED (IF_DEF_PARAMS (ifp), passive_interface)) |
| dflt = IF_DEF_PARAMS (ifp)->passive_interface; |
| else |
| dflt = ospf->passive_interface_default; |
| |
| if (value != dflt) |
| SET_IF_PARAM (params, passive_interface); |
| else |
| UNSET_IF_PARAM (params, passive_interface); |
| |
| ospf_free_if_params (ifp, addr); |
| ospf_if_update_params (ifp, addr); |
| } |
| else |
| { |
| if (value != ospf->passive_interface_default) |
| SET_IF_PARAM (params, passive_interface); |
| else |
| UNSET_IF_PARAM (params, passive_interface); |
| } |
| } |
| |
| DEFUN (ospf_passive_interface, |
| ospf_passive_interface_addr_cmd, |
| "passive-interface IFNAME A.B.C.D", |
| "Suppress routing updates on an interface\n" |
| "Interface's name\n") |
| { |
| struct interface *ifp; |
| struct in_addr addr; |
| int ret; |
| struct ospf_if_params *params; |
| struct route_node *rn; |
| struct ospf *ospf = vty->index; |
| |
| if (argc == 0) |
| { |
| ospf_passive_interface_default (ospf, OSPF_IF_PASSIVE); |
| return CMD_SUCCESS; |
| } |
| |
| ifp = if_get_by_name (argv[0]); |
| |
| params = IF_DEF_PARAMS (ifp); |
| |
| if (argc == 2) |
| { |
| ret = inet_aton(argv[1], &addr); |
| if (!ret) |
| { |
| vty_out (vty, "Please specify interface address by A.B.C.D%s", |
| VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| params = ospf_get_if_params (ifp, addr); |
| ospf_if_update_params (ifp, addr); |
| } |
| ospf_passive_interface_update (ospf, ifp, addr, params, OSPF_IF_PASSIVE); |
| |
| /* XXX We should call ospf_if_set_multicast on exactly those |
| * interfaces for which the passive property changed. It is too much |
| * work to determine this set, so we do this for every interface. |
| * This is safe and reasonable because ospf_if_set_multicast uses a |
| * record of joined groups to avoid systems calls if the desired |
| * memberships match the current memership. |
| */ |
| |
| for (rn = route_top(IF_OIFS(ifp)); rn; rn = route_next (rn)) |
| { |
| struct ospf_interface *oi = rn->info; |
| |
| if (oi && (OSPF_IF_PARAM(oi, passive_interface) == OSPF_IF_PASSIVE)) |
| ospf_if_set_multicast(oi); |
| } |
| /* |
| * XXX It is not clear what state transitions the interface needs to |
| * undergo when going from active to passive. Fixing this will |
| * require precise identification of interfaces having such a |
| * transition. |
| */ |
| |
| return CMD_SUCCESS; |
| } |
| |
| ALIAS (ospf_passive_interface, |
| ospf_passive_interface_cmd, |
| "passive-interface IFNAME", |
| "Suppress routing updates on an interface\n" |
| "Interface's name\n") |
| |
| ALIAS (ospf_passive_interface, |
| ospf_passive_interface_default_cmd, |
| "passive-interface default", |
| "Suppress routing updates on an interface\n" |
| "Suppress routing updates on interfaces by default\n") |
| |
| DEFUN (no_ospf_passive_interface, |
| no_ospf_passive_interface_addr_cmd, |
| "no passive-interface IFNAME A.B.C.D", |
| NO_STR |
| "Allow routing updates on an interface\n" |
| "Interface's name\n") |
| { |
| struct interface *ifp; |
| struct in_addr addr; |
| struct ospf_if_params *params; |
| int ret; |
| struct route_node *rn; |
| struct ospf *ospf = vty->index; |
| |
| if (argc == 0) |
| { |
| ospf_passive_interface_default (ospf, OSPF_IF_ACTIVE); |
| return CMD_SUCCESS; |
| } |
| |
| ifp = if_get_by_name (argv[0]); |
| |
| params = IF_DEF_PARAMS (ifp); |
| |
| if (argc == 2) |
| { |
| ret = inet_aton(argv[1], &addr); |
| if (!ret) |
| { |
| vty_out (vty, "Please specify interface address by A.B.C.D%s", |
| VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| params = ospf_lookup_if_params (ifp, addr); |
| if (params == NULL) |
| return CMD_SUCCESS; |
| } |
| ospf_passive_interface_update (ospf, ifp, addr, params, OSPF_IF_ACTIVE); |
| |
| /* XXX We should call ospf_if_set_multicast on exactly those |
| * interfaces for which the passive property changed. It is too much |
| * work to determine this set, so we do this for every interface. |
| * This is safe and reasonable because ospf_if_set_multicast uses a |
| * record of joined groups to avoid systems calls if the desired |
| * memberships match the current memership. |
| */ |
| for (rn = route_top(IF_OIFS(ifp)); rn; rn = route_next (rn)) |
| { |
| struct ospf_interface *oi = rn->info; |
| |
| if (oi && (OSPF_IF_PARAM(oi, passive_interface) == OSPF_IF_ACTIVE)) |
| ospf_if_set_multicast(oi); |
| } |
| |
| return CMD_SUCCESS; |
| } |
| |
| ALIAS (no_ospf_passive_interface, |
| no_ospf_passive_interface_cmd, |
| "no passive-interface IFNAME", |
| NO_STR |
| "Allow routing updates on an interface\n" |
| "Interface's name\n") |
| |
| ALIAS (no_ospf_passive_interface, |
| no_ospf_passive_interface_default_cmd, |
| "no passive-interface default", |
| NO_STR |
| "Allow routing updates on an interface\n" |
| "Allow routing updates on interfaces by default\n") |
| |
| DEFUN (ospf_network_area, |
| ospf_network_area_cmd, |
| "network A.B.C.D/M area (A.B.C.D|<0-4294967295>)", |
| "Enable routing on an IP network\n" |
| "OSPF network prefix\n" |
| "Set the OSPF area ID\n" |
| "OSPF area ID in IP address format\n" |
| "OSPF area ID as a decimal value\n") |
| { |
| struct ospf *ospf= vty->index; |
| struct prefix_ipv4 p; |
| struct in_addr area_id; |
| int ret, format; |
| |
| /* Get network prefix and Area ID. */ |
| VTY_GET_IPV4_PREFIX ("network prefix", p, argv[0]); |
| VTY_GET_OSPF_AREA_ID (area_id, format, argv[1]); |
| |
| ret = ospf_network_set (ospf, &p, area_id); |
| if (ret == 0) |
| { |
| vty_out (vty, "There is already same network statement.%s", VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (no_ospf_network_area, |
| no_ospf_network_area_cmd, |
| "no network A.B.C.D/M area (A.B.C.D|<0-4294967295>)", |
| NO_STR |
| "Enable routing on an IP network\n" |
| "OSPF network prefix\n" |
| "Set the OSPF area ID\n" |
| "OSPF area ID in IP address format\n" |
| "OSPF area ID as a decimal value\n") |
| { |
| struct ospf *ospf = (struct ospf *) vty->index; |
| struct prefix_ipv4 p; |
| struct in_addr area_id; |
| int ret, format; |
| |
| /* Get network prefix and Area ID. */ |
| VTY_GET_IPV4_PREFIX ("network prefix", p, argv[0]); |
| VTY_GET_OSPF_AREA_ID (area_id, format, argv[1]); |
| |
| ret = ospf_network_unset (ospf, &p, area_id); |
| if (ret == 0) |
| { |
| vty_out (vty, "Can't find specified network area configuration.%s", |
| VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| return CMD_SUCCESS; |
| } |
| |
| |
| DEFUN (ospf_area_range, |
| ospf_area_range_cmd, |
| "area (A.B.C.D|<0-4294967295>) range A.B.C.D/M", |
| "OSPF area parameters\n" |
| "OSPF area ID in IP address format\n" |
| "OSPF area ID as a decimal value\n" |
| "Summarize routes matching address/mask (border routers only)\n" |
| "Area range prefix\n") |
| { |
| struct ospf *ospf = vty->index; |
| struct prefix_ipv4 p; |
| struct in_addr area_id; |
| int format; |
| u_int32_t cost; |
| |
| VTY_GET_OSPF_AREA_ID (area_id, format, argv[0]); |
| VTY_GET_IPV4_PREFIX ("area range", p, argv[1]); |
| |
| ospf_area_range_set (ospf, area_id, &p, OSPF_AREA_RANGE_ADVERTISE); |
| if (argc > 2) |
| { |
| VTY_GET_INTEGER ("range cost", cost, argv[2]); |
| ospf_area_range_cost_set (ospf, area_id, &p, cost); |
| } |
| |
| return CMD_SUCCESS; |
| } |
| |
| ALIAS (ospf_area_range, |
| ospf_area_range_advertise_cmd, |
| "area (A.B.C.D|<0-4294967295>) range A.B.C.D/M advertise", |
| "OSPF area parameters\n" |
| "OSPF area ID in IP address format\n" |
| "OSPF area ID as a decimal value\n" |
| "OSPF area range for route advertise (default)\n" |
| "Area range prefix\n" |
| "Advertise this range (default)\n") |
| |
| ALIAS (ospf_area_range, |
| ospf_area_range_cost_cmd, |
| "area (A.B.C.D|<0-4294967295>) range A.B.C.D/M cost <0-16777215>", |
| "OSPF area parameters\n" |
| "OSPF area ID in IP address format\n" |
| "OSPF area ID as a decimal value\n" |
| "Summarize routes matching address/mask (border routers only)\n" |
| "Area range prefix\n" |
| "User specified metric for this range\n" |
| "Advertised metric for this range\n") |
| |
| ALIAS (ospf_area_range, |
| ospf_area_range_advertise_cost_cmd, |
| "area (A.B.C.D|<0-4294967295>) range A.B.C.D/M advertise cost <0-16777215>", |
| "OSPF area parameters\n" |
| "OSPF area ID in IP address format\n" |
| "OSPF area ID as a decimal value\n" |
| "Summarize routes matching address/mask (border routers only)\n" |
| "Area range prefix\n" |
| "Advertise this range (default)\n" |
| "User specified metric for this range\n" |
| "Advertised metric for this range\n") |
| |
| DEFUN (ospf_area_range_not_advertise, |
| ospf_area_range_not_advertise_cmd, |
| "area (A.B.C.D|<0-4294967295>) range A.B.C.D/M not-advertise", |
| "OSPF area parameters\n" |
| "OSPF area ID in IP address format\n" |
| "OSPF area ID as a decimal value\n" |
| "Summarize routes matching address/mask (border routers only)\n" |
| "Area range prefix\n" |
| "DoNotAdvertise this range\n") |
| { |
| struct ospf *ospf = vty->index; |
| struct prefix_ipv4 p; |
| struct in_addr area_id; |
| int format; |
| |
| VTY_GET_OSPF_AREA_ID (area_id, format, argv[0]); |
| VTY_GET_IPV4_PREFIX ("area range", p, argv[1]); |
| |
| ospf_area_range_set (ospf, area_id, &p, 0); |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (no_ospf_area_range, |
| no_ospf_area_range_cmd, |
| "no area (A.B.C.D|<0-4294967295>) range A.B.C.D/M", |
| NO_STR |
| "OSPF area parameters\n" |
| "OSPF area ID in IP address format\n" |
| "OSPF area ID as a decimal value\n" |
| "Summarize routes matching address/mask (border routers only)\n" |
| "Area range prefix\n") |
| { |
| struct ospf *ospf = vty->index; |
| struct prefix_ipv4 p; |
| struct in_addr area_id; |
| int format; |
| |
| VTY_GET_OSPF_AREA_ID (area_id, format, argv[0]); |
| VTY_GET_IPV4_PREFIX ("area range", p, argv[1]); |
| |
| ospf_area_range_unset (ospf, area_id, &p); |
| |
| return CMD_SUCCESS; |
| } |
| |
| ALIAS (no_ospf_area_range, |
| no_ospf_area_range_advertise_cmd, |
| "no area (A.B.C.D|<0-4294967295>) range A.B.C.D/M (advertise|not-advertise)", |
| NO_STR |
| "OSPF area parameters\n" |
| "OSPF area ID in IP address format\n" |
| "OSPF area ID as a decimal value\n" |
| "Summarize routes matching address/mask (border routers only)\n" |
| "Area range prefix\n" |
| "Advertise this range (default)\n" |
| "DoNotAdvertise this range\n") |
| |
| ALIAS (no_ospf_area_range, |
| no_ospf_area_range_cost_cmd, |
| "no area (A.B.C.D|<0-4294967295>) range A.B.C.D/M cost <0-16777215>", |
| NO_STR |
| "OSPF area parameters\n" |
| "OSPF area ID in IP address format\n" |
| "OSPF area ID as a decimal value\n" |
| "Summarize routes matching address/mask (border routers only)\n" |
| "Area range prefix\n" |
| "User specified metric for this range\n" |
| "Advertised metric for this range\n") |
| |
| ALIAS (no_ospf_area_range, |
| no_ospf_area_range_advertise_cost_cmd, |
| "no area (A.B.C.D|<0-4294967295>) range A.B.C.D/M advertise cost <0-16777215>", |
| NO_STR |
| "OSPF area parameters\n" |
| "OSPF area ID in IP address format\n" |
| "OSPF area ID as a decimal value\n" |
| "Summarize routes matching address/mask (border routers only)\n" |
| "Area range prefix\n" |
| "Advertise this range (default)\n" |
| "User specified metric for this range\n" |
| "Advertised metric for this range\n") |
| |
| DEFUN (ospf_area_range_substitute, |
| ospf_area_range_substitute_cmd, |
| "area (A.B.C.D|<0-4294967295>) range A.B.C.D/M substitute A.B.C.D/M", |
| "OSPF area parameters\n" |
| "OSPF area ID in IP address format\n" |
| "OSPF area ID as a decimal value\n" |
| "Summarize routes matching address/mask (border routers only)\n" |
| "Area range prefix\n" |
| "Announce area range as another prefix\n" |
| "Network prefix to be announced instead of range\n") |
| { |
| struct ospf *ospf = vty->index; |
| struct prefix_ipv4 p, s; |
| struct in_addr area_id; |
| int format; |
| |
| VTY_GET_OSPF_AREA_ID (area_id, format, argv[0]); |
| VTY_GET_IPV4_PREFIX ("area range", p, argv[1]); |
| VTY_GET_IPV4_PREFIX ("substituted network prefix", s, argv[2]); |
| |
| ospf_area_range_substitute_set (ospf, area_id, &p, &s); |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (no_ospf_area_range_substitute, |
| no_ospf_area_range_substitute_cmd, |
| "no area (A.B.C.D|<0-4294967295>) range A.B.C.D/M substitute A.B.C.D/M", |
| NO_STR |
| "OSPF area parameters\n" |
| "OSPF area ID in IP address format\n" |
| "OSPF area ID as a decimal value\n" |
| "Summarize routes matching address/mask (border routers only)\n" |
| "Area range prefix\n" |
| "Announce area range as another prefix\n" |
| "Network prefix to be announced instead of range\n") |
| { |
| struct ospf *ospf = vty->index; |
| struct prefix_ipv4 p, s; |
| struct in_addr area_id; |
| int format; |
| |
| VTY_GET_OSPF_AREA_ID (area_id, format, argv[0]); |
| VTY_GET_IPV4_PREFIX ("area range", p, argv[1]); |
| VTY_GET_IPV4_PREFIX ("substituted network prefix", s, argv[2]); |
| |
| ospf_area_range_substitute_unset (ospf, area_id, &p); |
| |
| return CMD_SUCCESS; |
| } |
| |
| |
| /* Command Handler Logic in VLink stuff is delicate!! |
| |
| ALTER AT YOUR OWN RISK!!!! |
| |
| Various dummy values are used to represent 'NoChange' state for |
| VLink configuration NOT being changed by a VLink command, and |
| special syntax is used within the command strings so that the |
| typed in command verbs can be seen in the configuration command |
| bacckend handler. This is to drastically reduce the verbeage |
| required to coe up with a reasonably compatible Cisco VLink command |
| |
| - Matthew Grant <grantma@anathoth.gen.nz> |
| Wed, 21 Feb 2001 15:13:52 +1300 |
| */ |
| |
| |
| /* Configuration data for virtual links |
| */ |
| struct ospf_vl_config_data { |
| struct vty *vty; /* vty stuff */ |
| struct in_addr area_id; /* area ID from command line */ |
| int format; /* command line area ID format */ |
| struct in_addr vl_peer; /* command line vl_peer */ |
| int auth_type; /* Authehntication type, if given */ |
| char *auth_key; /* simple password if present */ |
| int crypto_key_id; /* Cryptographic key ID */ |
| char *md5_key; /* MD5 authentication key */ |
| int hello_interval; /* Obvious what these are... */ |
| int retransmit_interval; |
| int transmit_delay; |
| int dead_interval; |
| }; |
| |
| static void |
| ospf_vl_config_data_init (struct ospf_vl_config_data *vl_config, |
| struct vty *vty) |
| { |
| memset (vl_config, 0, sizeof (struct ospf_vl_config_data)); |
| vl_config->auth_type = OSPF_AUTH_CMD_NOTSEEN; |
| vl_config->vty = vty; |
| } |
| |
| static struct ospf_vl_data * |
| ospf_find_vl_data (struct ospf *ospf, struct ospf_vl_config_data *vl_config) |
| { |
| struct ospf_area *area; |
| struct ospf_vl_data *vl_data; |
| struct vty *vty; |
| struct in_addr area_id; |
| |
| vty = vl_config->vty; |
| area_id = vl_config->area_id; |
| |
| if (area_id.s_addr == OSPF_AREA_BACKBONE) |
| { |
| vty_out (vty, |
| "Configuring VLs over the backbone is not allowed%s", |
| VTY_NEWLINE); |
| return NULL; |
| } |
| area = ospf_area_get (ospf, area_id, vl_config->format); |
| |
| if (area->external_routing != OSPF_AREA_DEFAULT) |
| { |
| if (vl_config->format == OSPF_AREA_ID_FORMAT_ADDRESS) |
| vty_out (vty, "Area %s is %s%s", |
| inet_ntoa (area_id), |
| area->external_routing == OSPF_AREA_NSSA?"nssa":"stub", |
| VTY_NEWLINE); |
| else |
| vty_out (vty, "Area %ld is %s%s", |
| (u_long)ntohl (area_id.s_addr), |
| area->external_routing == OSPF_AREA_NSSA?"nssa":"stub", |
| VTY_NEWLINE); |
| return NULL; |
| } |
| |
| if ((vl_data = ospf_vl_lookup (ospf, area, vl_config->vl_peer)) == NULL) |
| { |
| vl_data = ospf_vl_data_new (area, vl_config->vl_peer); |
| if (vl_data->vl_oi == NULL) |
| { |
| vl_data->vl_oi = ospf_vl_new (ospf, vl_data); |
| ospf_vl_add (ospf, vl_data); |
| ospf_spf_calculate_schedule (ospf, SPF_FLAG_CONFIG_CHANGE); |
| } |
| } |
| return vl_data; |
| } |
| |
| |
| static int |
| ospf_vl_set_security (struct ospf_vl_data *vl_data, |
| struct ospf_vl_config_data *vl_config) |
| { |
| struct crypt_key *ck; |
| struct vty *vty; |
| struct interface *ifp = vl_data->vl_oi->ifp; |
| |
| vty = vl_config->vty; |
| |
| if (vl_config->auth_type != OSPF_AUTH_CMD_NOTSEEN) |
| { |
| SET_IF_PARAM (IF_DEF_PARAMS (ifp), auth_type); |
| IF_DEF_PARAMS (ifp)->auth_type = vl_config->auth_type; |
| } |
| |
| if (vl_config->auth_key) |
| { |
| memset(IF_DEF_PARAMS (ifp)->auth_simple, 0, OSPF_AUTH_SIMPLE_SIZE+1); |
| strncpy ((char *) IF_DEF_PARAMS (ifp)->auth_simple, vl_config->auth_key, |
| OSPF_AUTH_SIMPLE_SIZE); |
| } |
| else if (vl_config->md5_key) |
| { |
| if (ospf_crypt_key_lookup (IF_DEF_PARAMS (ifp)->auth_crypt, vl_config->crypto_key_id) |
| != NULL) |
| { |
| vty_out (vty, "OSPF: Key %d already exists%s", |
| vl_config->crypto_key_id, VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| ck = ospf_crypt_key_new (); |
| ck->key_id = vl_config->crypto_key_id; |
| memset(ck->auth_key, 0, OSPF_AUTH_MD5_SIZE+1); |
| strncpy ((char *) ck->auth_key, vl_config->md5_key, OSPF_AUTH_MD5_SIZE); |
| |
| ospf_crypt_key_add (IF_DEF_PARAMS (ifp)->auth_crypt, ck); |
| } |
| else if (vl_config->crypto_key_id != 0) |
| { |
| /* Delete a key */ |
| |
| if (ospf_crypt_key_lookup (IF_DEF_PARAMS (ifp)->auth_crypt, |
| vl_config->crypto_key_id) == NULL) |
| { |
| vty_out (vty, "OSPF: Key %d does not exist%s", |
| vl_config->crypto_key_id, VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| ospf_crypt_key_delete (IF_DEF_PARAMS (ifp)->auth_crypt, vl_config->crypto_key_id); |
| |
| } |
| |
| return CMD_SUCCESS; |
| } |
| |
| static int |
| ospf_vl_set_timers (struct ospf_vl_data *vl_data, |
| struct ospf_vl_config_data *vl_config) |
| { |
| struct interface *ifp = ifp = vl_data->vl_oi->ifp; |
| /* Virtual Link data initialised to defaults, so only set |
| if a value given */ |
| if (vl_config->hello_interval) |
| { |
| SET_IF_PARAM (IF_DEF_PARAMS (ifp), v_hello); |
| IF_DEF_PARAMS (ifp)->v_hello = vl_config->hello_interval; |
| } |
| |
| if (vl_config->dead_interval) |
| { |
| SET_IF_PARAM (IF_DEF_PARAMS (ifp), v_wait); |
| IF_DEF_PARAMS (ifp)->v_wait = vl_config->dead_interval; |
| } |
| |
| if (vl_config->retransmit_interval) |
| { |
| SET_IF_PARAM (IF_DEF_PARAMS (ifp), retransmit_interval); |
| IF_DEF_PARAMS (ifp)->retransmit_interval = vl_config->retransmit_interval; |
| } |
| |
| if (vl_config->transmit_delay) |
| { |
| SET_IF_PARAM (IF_DEF_PARAMS (ifp), transmit_delay); |
| IF_DEF_PARAMS (ifp)->transmit_delay = vl_config->transmit_delay; |
| } |
| |
| return CMD_SUCCESS; |
| } |
| |
| |
| |
| /* The business end of all of the above */ |
| static int |
| ospf_vl_set (struct ospf *ospf, struct ospf_vl_config_data *vl_config) |
| { |
| struct ospf_vl_data *vl_data; |
| int ret; |
| |
| vl_data = ospf_find_vl_data (ospf, vl_config); |
| if (!vl_data) |
| return CMD_WARNING; |
| |
| /* Process this one first as it can have a fatal result, which can |
| only logically occur if the virtual link exists already |
| Thus a command error does not result in a change to the |
| running configuration such as unexpectedly altered timer |
| values etc.*/ |
| ret = ospf_vl_set_security (vl_data, vl_config); |
| if (ret != CMD_SUCCESS) |
| return ret; |
| |
| /* Set any time based parameters, these area already range checked */ |
| |
| ret = ospf_vl_set_timers (vl_data, vl_config); |
| if (ret != CMD_SUCCESS) |
| return ret; |
| |
| return CMD_SUCCESS; |
| |
| } |
| |
| /* This stuff exists to make specifying all the alias commands A LOT simpler |
| */ |
| #define VLINK_HELPSTR_IPADDR \ |
| "OSPF area parameters\n" \ |
| "OSPF area ID in IP address format\n" \ |
| "OSPF area ID as a decimal value\n" \ |
| "Configure a virtual link\n" \ |
| "Router ID of the remote ABR\n" |
| |
| #define VLINK_HELPSTR_AUTHTYPE_SIMPLE \ |
| "Enable authentication on this virtual link\n" \ |
| "dummy string \n" |
| |
| #define VLINK_HELPSTR_AUTHTYPE_ALL \ |
| VLINK_HELPSTR_AUTHTYPE_SIMPLE \ |
| "Use null authentication\n" \ |
| "Use message-digest authentication\n" |
| |
| #define VLINK_HELPSTR_TIME_PARAM_NOSECS \ |
| "Time between HELLO packets\n" \ |
| "Time between retransmitting lost link state advertisements\n" \ |
| "Link state transmit delay\n" \ |
| "Interval after which a neighbor is declared dead\n" |
| |
| #define VLINK_HELPSTR_TIME_PARAM \ |
| VLINK_HELPSTR_TIME_PARAM_NOSECS \ |
| "Seconds\n" |
| |
| #define VLINK_HELPSTR_AUTH_SIMPLE \ |
| "Authentication password (key)\n" \ |
| "The OSPF password (key)" |
| |
| #define VLINK_HELPSTR_AUTH_MD5 \ |
| "Message digest authentication password (key)\n" \ |
| "dummy string \n" \ |
| "Key ID\n" \ |
| "Use MD5 algorithm\n" \ |
| "The OSPF password (key)" |
| |
| DEFUN (ospf_area_vlink, |
| ospf_area_vlink_cmd, |
| "area (A.B.C.D|<0-4294967295>) virtual-link A.B.C.D", |
| VLINK_HELPSTR_IPADDR) |
| { |
| struct ospf *ospf = vty->index; |
| struct ospf_vl_config_data vl_config; |
| char auth_key[OSPF_AUTH_SIMPLE_SIZE+1]; |
| char md5_key[OSPF_AUTH_MD5_SIZE+1]; |
| int i; |
| int ret; |
| |
| ospf_vl_config_data_init(&vl_config, vty); |
| |
| /* Read off first 2 parameters and check them */ |
| ret = ospf_str2area_id (argv[0], &vl_config.area_id, &vl_config.format); |
| if (ret < 0) |
| { |
| vty_out (vty, "OSPF area ID is invalid%s", VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| ret = inet_aton (argv[1], &vl_config.vl_peer); |
| if (! ret) |
| { |
| vty_out (vty, "Please specify valid Router ID as a.b.c.d%s", |
| VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| if (argc <=2) |
| { |
| /* Thats all folks! - BUGS B. strikes again!!!*/ |
| |
| return ospf_vl_set (ospf, &vl_config); |
| } |
| |
| /* Deal with other parameters */ |
| for (i=2; i < argc; i++) |
| { |
| |
| /* vty_out (vty, "argv[%d] - %s%s", i, argv[i], VTY_NEWLINE); */ |
| |
| switch (argv[i][0]) |
| { |
| |
| case 'a': |
| if (i > 2 || strncmp (argv[i], "authentication-", 15) == 0) |
| { |
| /* authentication-key - this option can occur anywhere on |
| command line. At start of command line |
| must check for authentication option. */ |
| memset (auth_key, 0, OSPF_AUTH_SIMPLE_SIZE + 1); |
| strncpy (auth_key, argv[i+1], OSPF_AUTH_SIMPLE_SIZE); |
| vl_config.auth_key = auth_key; |
| i++; |
| } |
| else if (strncmp (argv[i], "authentication", 14) == 0) |
| { |
| /* authentication - this option can only occur at start |
| of command line */ |
| vl_config.auth_type = OSPF_AUTH_SIMPLE; |
| if ((i+1) < argc) |
| { |
| if (strncmp (argv[i+1], "n", 1) == 0) |
| { |
| /* "authentication null" */ |
| vl_config.auth_type = OSPF_AUTH_NULL; |
| i++; |
| } |
| else if (strncmp (argv[i+1], "m", 1) == 0 |
| && strcmp (argv[i+1], "message-digest-") != 0) |
| { |
| /* "authentication message-digest" */ |
| vl_config.auth_type = OSPF_AUTH_CRYPTOGRAPHIC; |
| i++; |
| } |
| } |
| } |
| break; |
| |
| case 'm': |
| /* message-digest-key */ |
| i++; |
| vl_config.crypto_key_id = strtol (argv[i], NULL, 10); |
| if (vl_config.crypto_key_id < 0) |
| return CMD_WARNING; |
| i++; |
| memset(md5_key, 0, OSPF_AUTH_MD5_SIZE+1); |
| strncpy (md5_key, argv[i], OSPF_AUTH_MD5_SIZE); |
| vl_config.md5_key = md5_key; |
| break; |
| |
| case 'h': |
| /* Hello interval */ |
| i++; |
| vl_config.hello_interval = strtol (argv[i], NULL, 10); |
| if (vl_config.hello_interval < 0) |
| return CMD_WARNING; |
| break; |
| |
| case 'r': |
| /* Retransmit Interval */ |
| i++; |
| vl_config.retransmit_interval = strtol (argv[i], NULL, 10); |
| if (vl_config.retransmit_interval < 0) |
| return CMD_WARNING; |
| break; |
| |
| case 't': |
| /* Transmit Delay */ |
| i++; |
| vl_config.transmit_delay = strtol (argv[i], NULL, 10); |
| if (vl_config.transmit_delay < 0) |
| return CMD_WARNING; |
| break; |
| |
| case 'd': |
| /* Dead Interval */ |
| i++; |
| vl_config.dead_interval = strtol (argv[i], NULL, 10); |
| if (vl_config.dead_interval < 0) |
| return CMD_WARNING; |
| break; |
| } |
| } |
| |
| |
| /* Action configuration */ |
| |
| return ospf_vl_set (ospf, &vl_config); |
| |
| } |
| |
| DEFUN (no_ospf_area_vlink, |
| no_ospf_area_vlink_cmd, |
| "no area (A.B.C.D|<0-4294967295>) virtual-link A.B.C.D", |
| NO_STR |
| VLINK_HELPSTR_IPADDR) |
| { |
| struct ospf *ospf = vty->index; |
| struct ospf_area *area; |
| struct ospf_vl_config_data vl_config; |
| struct ospf_vl_data *vl_data = NULL; |
| char auth_key[OSPF_AUTH_SIMPLE_SIZE+1]; |
| int i; |
| int ret, format; |
| |
| ospf_vl_config_data_init(&vl_config, vty); |
| |
| ret = ospf_str2area_id (argv[0], &vl_config.area_id, &format); |
| if (ret < 0) |
| { |
| vty_out (vty, "OSPF area ID is invalid%s", VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| area = ospf_area_lookup_by_area_id (ospf, vl_config.area_id); |
| if (!area) |
| { |
| vty_out (vty, "Area does not exist%s", VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| ret = inet_aton (argv[1], &vl_config.vl_peer); |
| if (! ret) |
| { |
| vty_out (vty, "Please specify valid Router ID as a.b.c.d%s", |
| VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| if (argc <=2) |
| { |
| /* Basic VLink no command */ |
| /* Thats all folks! - BUGS B. strikes again!!!*/ |
| if ((vl_data = ospf_vl_lookup (ospf, area, vl_config.vl_peer))) |
| ospf_vl_delete (ospf, vl_data); |
| |
| ospf_area_check_free (ospf, vl_config.area_id); |
| |
| return CMD_SUCCESS; |
| } |
| |
| /* If we are down here, we are reseting parameters */ |
| |
| /* Deal with other parameters */ |
| for (i=2; i < argc; i++) |
| { |
| /* vty_out (vty, "argv[%d] - %s%s", i, argv[i], VTY_NEWLINE); */ |
| |
| switch (argv[i][0]) |
| { |
| |
| case 'a': |
| if (i > 2 || strncmp (argv[i], "authentication-", 15) == 0) |
| { |
| /* authentication-key - this option can occur anywhere on |
| command line. At start of command line |
| must check for authentication option. */ |
| memset (auth_key, 0, OSPF_AUTH_SIMPLE_SIZE + 1); |
| vl_config.auth_key = auth_key; |
| } |
| else if (strncmp (argv[i], "authentication", 14) == 0) |
| { |
| /* authentication - this option can only occur at start |
| of command line */ |
| vl_config.auth_type = OSPF_AUTH_NOTSET; |
| } |
| break; |
| |
| case 'm': |
| /* message-digest-key */ |
| /* Delete one key */ |
| i++; |
| vl_config.crypto_key_id = strtol (argv[i], NULL, 10); |
| if (vl_config.crypto_key_id < 0) |
| return CMD_WARNING; |
| vl_config.md5_key = NULL; |
| break; |
| |
| case 'h': |
| /* Hello interval */ |
| vl_config.hello_interval = OSPF_HELLO_INTERVAL_DEFAULT; |
| break; |
| |
| case 'r': |
| /* Retransmit Interval */ |
| vl_config.retransmit_interval = OSPF_RETRANSMIT_INTERVAL_DEFAULT; |
| break; |
| |
| case 't': |
| /* Transmit Delay */ |
| vl_config.transmit_delay = OSPF_TRANSMIT_DELAY_DEFAULT; |
| break; |
| |
| case 'd': |
| /* Dead Interval */ |
| i++; |
| vl_config.dead_interval = OSPF_ROUTER_DEAD_INTERVAL_DEFAULT; |
| break; |
| } |
| } |
| |
| |
| /* Action configuration */ |
| |
| return ospf_vl_set (ospf, &vl_config); |
| } |
| |
| ALIAS (ospf_area_vlink, |
| ospf_area_vlink_param1_cmd, |
| "area (A.B.C.D|<0-4294967295>) virtual-link A.B.C.D " |
| "(hello-interval|retransmit-interval|transmit-delay|dead-interval) <1-65535>", |
| VLINK_HELPSTR_IPADDR |
| VLINK_HELPSTR_TIME_PARAM) |
| |
| ALIAS (no_ospf_area_vlink, |
| no_ospf_area_vlink_param1_cmd, |
| "no area (A.B.C.D|<0-4294967295>) virtual-link A.B.C.D " |
| "(hello-interval|retransmit-interval|transmit-delay|dead-interval)", |
| NO_STR |
| VLINK_HELPSTR_IPADDR |
| VLINK_HELPSTR_TIME_PARAM) |
| |
| ALIAS (ospf_area_vlink, |
| ospf_area_vlink_param2_cmd, |
| "area (A.B.C.D|<0-4294967295>) virtual-link A.B.C.D " |
| "(hello-interval|retransmit-interval|transmit-delay|dead-interval) <1-65535> " |
| "(hello-interval|retransmit-interval|transmit-delay|dead-interval) <1-65535>", |
| VLINK_HELPSTR_IPADDR |
| VLINK_HELPSTR_TIME_PARAM |
| VLINK_HELPSTR_TIME_PARAM) |
| |
| ALIAS (no_ospf_area_vlink, |
| no_ospf_area_vlink_param2_cmd, |
| "no area (A.B.C.D|<0-4294967295>) virtual-link A.B.C.D " |
| "(hello-interval|retransmit-interval|transmit-delay|dead-interval) " |
| "(hello-interval|retransmit-interval|transmit-delay|dead-interval)", |
| NO_STR |
| VLINK_HELPSTR_IPADDR |
| VLINK_HELPSTR_TIME_PARAM |
| VLINK_HELPSTR_TIME_PARAM) |
| |
| ALIAS (ospf_area_vlink, |
| ospf_area_vlink_param3_cmd, |
| "area (A.B.C.D|<0-4294967295>) virtual-link A.B.C.D " |
| "(hello-interval|retransmit-interval|transmit-delay|dead-interval) <1-65535> " |
| "(hello-interval|retransmit-interval|transmit-delay|dead-interval) <1-65535> " |
| "(hello-interval|retransmit-interval|transmit-delay|dead-interval) <1-65535>", |
| VLINK_HELPSTR_IPADDR |
| VLINK_HELPSTR_TIME_PARAM |
| VLINK_HELPSTR_TIME_PARAM |
| VLINK_HELPSTR_TIME_PARAM) |
| |
| ALIAS (no_ospf_area_vlink, |
| no_ospf_area_vlink_param3_cmd, |
| "no area (A.B.C.D|<0-4294967295>) virtual-link A.B.C.D " |
| "(hello-interval|retransmit-interval|transmit-delay|dead-interval) " |
| "(hello-interval|retransmit-interval|transmit-delay|dead-interval) " |
| "(hello-interval|retransmit-interval|transmit-delay|dead-interval)", |
| NO_STR |
| VLINK_HELPSTR_IPADDR |
| VLINK_HELPSTR_TIME_PARAM |
| VLINK_HELPSTR_TIME_PARAM |
| VLINK_HELPSTR_TIME_PARAM) |
| |
| ALIAS (ospf_area_vlink, |
| ospf_area_vlink_param4_cmd, |
| "area (A.B.C.D|<0-4294967295>) virtual-link A.B.C.D " |
| "(hello-interval|retransmit-interval|transmit-delay|dead-interval) <1-65535> " |
| "(hello-interval|retransmit-interval|transmit-delay|dead-interval) <1-65535> " |
| "(hello-interval|retransmit-interval|transmit-delay|dead-interval) <1-65535> " |
| "(hello-interval|retransmit-interval|transmit-delay|dead-interval) <1-65535>", |
| VLINK_HELPSTR_IPADDR |
| VLINK_HELPSTR_TIME_PARAM |
| VLINK_HELPSTR_TIME_PARAM |
| VLINK_HELPSTR_TIME_PARAM |
| VLINK_HELPSTR_TIME_PARAM) |
| |
| ALIAS (no_ospf_area_vlink, |
| no_ospf_area_vlink_param4_cmd, |
| "no area (A.B.C.D|<0-4294967295>) virtual-link A.B.C.D " |
| "(hello-interval|retransmit-interval|transmit-delay|dead-interval) " |
| "(hello-interval|retransmit-interval|transmit-delay|dead-interval) " |
| "(hello-interval|retransmit-interval|transmit-delay|dead-interval) " |
| "(hello-interval|retransmit-interval|transmit-delay|dead-interval)", |
| NO_STR |
| VLINK_HELPSTR_IPADDR |
| VLINK_HELPSTR_TIME_PARAM |
| VLINK_HELPSTR_TIME_PARAM |
| VLINK_HELPSTR_TIME_PARAM |
| VLINK_HELPSTR_TIME_PARAM) |
| |
| ALIAS (ospf_area_vlink, |
| ospf_area_vlink_authtype_args_cmd, |
| "area (A.B.C.D|<0-4294967295>) virtual-link A.B.C.D " |
| "(authentication|) (message-digest|null)", |
| VLINK_HELPSTR_IPADDR |
| VLINK_HELPSTR_AUTHTYPE_ALL) |
| |
| ALIAS (ospf_area_vlink, |
| ospf_area_vlink_authtype_cmd, |
| "area (A.B.C.D|<0-4294967295>) virtual-link A.B.C.D " |
| "(authentication|)", |
| VLINK_HELPSTR_IPADDR |
| VLINK_HELPSTR_AUTHTYPE_SIMPLE) |
| |
| ALIAS (no_ospf_area_vlink, |
| no_ospf_area_vlink_authtype_cmd, |
| "no area (A.B.C.D|<0-4294967295>) virtual-link A.B.C.D " |
| "(authentication|)", |
| NO_STR |
| VLINK_HELPSTR_IPADDR |
| VLINK_HELPSTR_AUTHTYPE_SIMPLE) |
| |
| ALIAS (ospf_area_vlink, |
| ospf_area_vlink_md5_cmd, |
| "area (A.B.C.D|<0-4294967295>) virtual-link A.B.C.D " |
| "(message-digest-key|) <1-255> md5 KEY", |
| VLINK_HELPSTR_IPADDR |
| VLINK_HELPSTR_AUTH_MD5) |
| |
| ALIAS (no_ospf_area_vlink, |
| no_ospf_area_vlink_md5_cmd, |
| "no area (A.B.C.D|<0-4294967295>) virtual-link A.B.C.D " |
| "(message-digest-key|) <1-255>", |
| NO_STR |
| VLINK_HELPSTR_IPADDR |
| VLINK_HELPSTR_AUTH_MD5) |
| |
| ALIAS (ospf_area_vlink, |
| ospf_area_vlink_authkey_cmd, |
| "area (A.B.C.D|<0-4294967295>) virtual-link A.B.C.D " |
| "(authentication-key|) AUTH_KEY", |
| VLINK_HELPSTR_IPADDR |
| VLINK_HELPSTR_AUTH_SIMPLE) |
| |
| ALIAS (no_ospf_area_vlink, |
| no_ospf_area_vlink_authkey_cmd, |
| "no area (A.B.C.D|<0-4294967295>) virtual-link A.B.C.D " |
| "(authentication-key|)", |
| NO_STR |
| VLINK_HELPSTR_IPADDR |
| VLINK_HELPSTR_AUTH_SIMPLE) |
| |
| ALIAS (ospf_area_vlink, |
| ospf_area_vlink_authtype_args_authkey_cmd, |
| "area (A.B.C.D|<0-4294967295>) virtual-link A.B.C.D " |
| "(authentication|) (message-digest|null) " |
| "(authentication-key|) AUTH_KEY", |
| VLINK_HELPSTR_IPADDR |
| VLINK_HELPSTR_AUTHTYPE_ALL |
| VLINK_HELPSTR_AUTH_SIMPLE) |
| |
| ALIAS (ospf_area_vlink, |
| ospf_area_vlink_authtype_authkey_cmd, |
| "area (A.B.C.D|<0-4294967295>) virtual-link A.B.C.D " |
| "(authentication|) " |
| "(authentication-key|) AUTH_KEY", |
| VLINK_HELPSTR_IPADDR |
| VLINK_HELPSTR_AUTHTYPE_SIMPLE |
| VLINK_HELPSTR_AUTH_SIMPLE) |
| |
| ALIAS (no_ospf_area_vlink, |
| no_ospf_area_vlink_authtype_authkey_cmd, |
| "no area (A.B.C.D|<0-4294967295>) virtual-link A.B.C.D " |
| "(authentication|) " |
| "(authentication-key|)", |
| NO_STR |
| VLINK_HELPSTR_IPADDR |
| VLINK_HELPSTR_AUTHTYPE_SIMPLE |
| VLINK_HELPSTR_AUTH_SIMPLE) |
| |
| ALIAS (ospf_area_vlink, |
| ospf_area_vlink_authtype_args_md5_cmd, |
| "area (A.B.C.D|<0-4294967295>) virtual-link A.B.C.D " |
| "(authentication|) (message-digest|null) " |
| "(message-digest-key|) <1-255> md5 KEY", |
| VLINK_HELPSTR_IPADDR |
| VLINK_HELPSTR_AUTHTYPE_ALL |
| VLINK_HELPSTR_AUTH_MD5) |
| |
| ALIAS (ospf_area_vlink, |
| ospf_area_vlink_authtype_md5_cmd, |
| "area (A.B.C.D|<0-4294967295>) virtual-link A.B.C.D " |
| "(authentication|) " |
| "(message-digest-key|) <1-255> md5 KEY", |
| VLINK_HELPSTR_IPADDR |
| VLINK_HELPSTR_AUTHTYPE_SIMPLE |
| VLINK_HELPSTR_AUTH_MD5) |
| |
| ALIAS (no_ospf_area_vlink, |
| no_ospf_area_vlink_authtype_md5_cmd, |
| "no area (A.B.C.D|<0-4294967295>) virtual-link A.B.C.D " |
| "(authentication|) " |
| "(message-digest-key|)", |
| NO_STR |
| VLINK_HELPSTR_IPADDR |
| VLINK_HELPSTR_AUTHTYPE_SIMPLE |
| VLINK_HELPSTR_AUTH_MD5) |
| |
| |
| DEFUN (ospf_area_shortcut, |
| ospf_area_shortcut_cmd, |
| "area (A.B.C.D|<0-4294967295>) shortcut (default|enable|disable)", |
| "OSPF area parameters\n" |
| "OSPF area ID in IP address format\n" |
| "OSPF area ID as a decimal value\n" |
| "Configure the area's shortcutting mode\n" |
| "Set default shortcutting behavior\n" |
| "Enable shortcutting through the area\n" |
| "Disable shortcutting through the area\n") |
| { |
| struct ospf *ospf = vty->index; |
| struct ospf_area *area; |
| struct in_addr area_id; |
| int mode; |
| int format; |
| |
| VTY_GET_OSPF_AREA_ID_NO_BB ("shortcut", area_id, format, argv[0]); |
| |
| area = ospf_area_get (ospf, area_id, format); |
| |
| if (strncmp (argv[1], "de", 2) == 0) |
| mode = OSPF_SHORTCUT_DEFAULT; |
| else if (strncmp (argv[1], "di", 2) == 0) |
| mode = OSPF_SHORTCUT_DISABLE; |
| else if (strncmp (argv[1], "e", 1) == 0) |
| mode = OSPF_SHORTCUT_ENABLE; |
| else |
| return CMD_WARNING; |
| |
| ospf_area_shortcut_set (ospf, area, mode); |
| |
| if (ospf->abr_type != OSPF_ABR_SHORTCUT) |
| vty_out (vty, "Shortcut area setting will take effect " |
| "only when the router is configured as Shortcut ABR%s", |
| VTY_NEWLINE); |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (no_ospf_area_shortcut, |
| no_ospf_area_shortcut_cmd, |
| "no area (A.B.C.D|<0-4294967295>) shortcut (enable|disable)", |
| NO_STR |
| "OSPF area parameters\n" |
| "OSPF area ID in IP address format\n" |
| "OSPF area ID as a decimal value\n" |
| "Deconfigure the area's shortcutting mode\n" |
| "Deconfigure enabled shortcutting through the area\n" |
| "Deconfigure disabled shortcutting through the area\n") |
| { |
| struct ospf *ospf = vty->index; |
| struct ospf_area *area; |
| struct in_addr area_id; |
| int format; |
| |
| VTY_GET_OSPF_AREA_ID_NO_BB ("shortcut", area_id, format, argv[0]); |
| |
| area = ospf_area_lookup_by_area_id (ospf, area_id); |
| if (!area) |
| return CMD_SUCCESS; |
| |
| ospf_area_shortcut_unset (ospf, area); |
| |
| return CMD_SUCCESS; |
| } |
| |
| |
| DEFUN (ospf_area_stub, |
| ospf_area_stub_cmd, |
| "area (A.B.C.D|<0-4294967295>) stub", |
| "OSPF area parameters\n" |
| "OSPF area ID in IP address format\n" |
| "OSPF area ID as a decimal value\n" |
| "Configure OSPF area as stub\n") |
| { |
| struct ospf *ospf = vty->index; |
| struct in_addr area_id; |
| int ret, format; |
| |
| VTY_GET_OSPF_AREA_ID_NO_BB ("stub", area_id, format, argv[0]); |
| |
| ret = ospf_area_stub_set (ospf, area_id); |
| if (ret == 0) |
| { |
| vty_out (vty, "First deconfigure all virtual link through this area%s", |
| VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| ospf_area_no_summary_unset (ospf, area_id); |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (ospf_area_stub_no_summary, |
| ospf_area_stub_no_summary_cmd, |
| "area (A.B.C.D|<0-4294967295>) stub no-summary", |
| "OSPF stub parameters\n" |
| "OSPF area ID in IP address format\n" |
| "OSPF area ID as a decimal value\n" |
| "Configure OSPF area as stub\n" |
| "Do not inject inter-area routes into stub\n") |
| { |
| struct ospf *ospf = vty->index; |
| struct in_addr area_id; |
| int ret, format; |
| |
| VTY_GET_OSPF_AREA_ID_NO_BB ("stub", area_id, format, argv[0]); |
| |
| ret = ospf_area_stub_set (ospf, area_id); |
| if (ret == 0) |
| { |
| vty_out (vty, "%% Area cannot be stub as it contains a virtual link%s", |
| VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| ospf_area_no_summary_set (ospf, area_id); |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (no_ospf_area_stub, |
| no_ospf_area_stub_cmd, |
| "no area (A.B.C.D|<0-4294967295>) stub", |
| NO_STR |
| "OSPF area parameters\n" |
| "OSPF area ID in IP address format\n" |
| "OSPF area ID as a decimal value\n" |
| "Configure OSPF area as stub\n") |
| { |
| struct ospf *ospf = vty->index; |
| struct in_addr area_id; |
| int format; |
| |
| VTY_GET_OSPF_AREA_ID_NO_BB ("stub", area_id, format, argv[0]); |
| |
| ospf_area_stub_unset (ospf, area_id); |
| ospf_area_no_summary_unset (ospf, area_id); |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (no_ospf_area_stub_no_summary, |
| no_ospf_area_stub_no_summary_cmd, |
| "no area (A.B.C.D|<0-4294967295>) stub no-summary", |
| NO_STR |
| "OSPF area parameters\n" |
| "OSPF area ID in IP address format\n" |
| "OSPF area ID as a decimal value\n" |
| "Configure OSPF area as stub\n" |
| "Do not inject inter-area routes into area\n") |
| { |
| struct ospf *ospf = vty->index; |
| struct in_addr area_id; |
| int format; |
| |
| VTY_GET_OSPF_AREA_ID_NO_BB ("stub", area_id, format, argv[0]); |
| ospf_area_no_summary_unset (ospf, area_id); |
| |
| return CMD_SUCCESS; |
| } |
| |
| static int |
| ospf_area_nssa_cmd_handler (struct vty *vty, int argc, const char *argv[], |
| int nosum) |
| { |
| struct ospf *ospf = vty->index; |
| struct in_addr area_id; |
| int ret, format; |
| |
| VTY_GET_OSPF_AREA_ID_NO_BB ("NSSA", area_id, format, argv[0]); |
| |
| ret = ospf_area_nssa_set (ospf, area_id); |
| if (ret == 0) |
| { |
| vty_out (vty, "%% Area cannot be nssa as it contains a virtual link%s", |
| VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| if (argc > 1) |
| { |
| if (strncmp (argv[1], "translate-c", 11) == 0) |
| ospf_area_nssa_translator_role_set (ospf, area_id, |
| OSPF_NSSA_ROLE_CANDIDATE); |
| else if (strncmp (argv[1], "translate-n", 11) == 0) |
| ospf_area_nssa_translator_role_set (ospf, area_id, |
| OSPF_NSSA_ROLE_NEVER); |
| else if (strncmp (argv[1], "translate-a", 11) == 0) |
| ospf_area_nssa_translator_role_set (ospf, area_id, |
| OSPF_NSSA_ROLE_ALWAYS); |
| } |
| else |
| { |
| ospf_area_nssa_translator_role_set (ospf, area_id, |
| OSPF_NSSA_ROLE_CANDIDATE); |
| } |
| |
| if (nosum) |
| ospf_area_no_summary_set (ospf, area_id); |
| else |
| ospf_area_no_summary_unset (ospf, area_id); |
| |
| ospf_schedule_abr_task (ospf); |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (ospf_area_nssa_translate_no_summary, |
| ospf_area_nssa_translate_no_summary_cmd, |
| "area (A.B.C.D|<0-4294967295>) nssa (translate-candidate|translate-never|translate-always) no-summary", |
| "OSPF area parameters\n" |
| "OSPF area ID in IP address format\n" |
| "OSPF area ID as a decimal value\n" |
| "Configure OSPF area as nssa\n" |
| "Configure NSSA-ABR for translate election (default)\n" |
| "Configure NSSA-ABR to never translate\n" |
| "Configure NSSA-ABR to always translate\n" |
| "Do not inject inter-area routes into nssa\n") |
| { |
| return ospf_area_nssa_cmd_handler (vty, argc, argv, 1); |
| } |
| |
| DEFUN (ospf_area_nssa_translate, |
| ospf_area_nssa_translate_cmd, |
| "area (A.B.C.D|<0-4294967295>) nssa (translate-candidate|translate-never|translate-always)", |
| "OSPF area parameters\n" |
| "OSPF area ID in IP address format\n" |
| "OSPF area ID as a decimal value\n" |
| "Configure OSPF area as nssa\n" |
| "Configure NSSA-ABR for translate election (default)\n" |
| "Configure NSSA-ABR to never translate\n" |
| "Configure NSSA-ABR to always translate\n") |
| { |
| return ospf_area_nssa_cmd_handler (vty, argc, argv, 0); |
| } |
| |
| DEFUN (ospf_area_nssa, |
| ospf_area_nssa_cmd, |
| "area (A.B.C.D|<0-4294967295>) nssa", |
| "OSPF area parameters\n" |
| "OSPF area ID in IP address format\n" |
| "OSPF area ID as a decimal value\n" |
| "Configure OSPF area as nssa\n") |
| { |
| return ospf_area_nssa_cmd_handler (vty, argc, argv, 0); |
| } |
| |
| DEFUN (ospf_area_nssa_no_summary, |
| ospf_area_nssa_no_summary_cmd, |
| "area (A.B.C.D|<0-4294967295>) nssa no-summary", |
| "OSPF area parameters\n" |
| "OSPF area ID in IP address format\n" |
| "OSPF area ID as a decimal value\n" |
| "Configure OSPF area as nssa\n" |
| "Do not inject inter-area routes into nssa\n") |
| { |
| return ospf_area_nssa_cmd_handler (vty, argc, argv, 1); |
| } |
| |
| DEFUN (no_ospf_area_nssa, |
| no_ospf_area_nssa_cmd, |
| "no area (A.B.C.D|<0-4294967295>) nssa", |
| NO_STR |
| "OSPF area parameters\n" |
| "OSPF area ID in IP address format\n" |
| "OSPF area ID as a decimal value\n" |
| "Configure OSPF area as nssa\n") |
| { |
| struct ospf *ospf = vty->index; |
| struct in_addr area_id; |
| int format; |
| |
| VTY_GET_OSPF_AREA_ID_NO_BB ("NSSA", area_id, format, argv[0]); |
| |
| ospf_area_nssa_unset (ospf, area_id); |
| ospf_area_no_summary_unset (ospf, area_id); |
| |
| ospf_schedule_abr_task (ospf); |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (no_ospf_area_nssa_no_summary, |
| no_ospf_area_nssa_no_summary_cmd, |
| "no area (A.B.C.D|<0-4294967295>) nssa no-summary", |
| NO_STR |
| "OSPF area parameters\n" |
| "OSPF area ID in IP address format\n" |
| "OSPF area ID as a decimal value\n" |
| "Configure OSPF area as nssa\n" |
| "Do not inject inter-area routes into nssa\n") |
| { |
| struct ospf *ospf = vty->index; |
| struct in_addr area_id; |
| int format; |
| |
| VTY_GET_OSPF_AREA_ID_NO_BB ("NSSA", area_id, format, argv[0]); |
| ospf_area_no_summary_unset (ospf, area_id); |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (ospf_area_default_cost, |
| ospf_area_default_cost_cmd, |
| "area (A.B.C.D|<0-4294967295>) default-cost <0-16777215>", |
| "OSPF area parameters\n" |
| "OSPF area ID in IP address format\n" |
| "OSPF area ID as a decimal value\n" |
| "Set the summary-default cost of a NSSA or stub area\n" |
| "Stub's advertised default summary cost\n") |
| { |
| struct ospf *ospf = vty->index; |
| struct ospf_area *area; |
| struct in_addr area_id; |
| u_int32_t cost; |
| int format; |
| struct prefix_ipv4 p; |
| |
| VTY_GET_OSPF_AREA_ID_NO_BB ("default-cost", area_id, format, argv[0]); |
| VTY_GET_INTEGER_RANGE ("stub default cost", cost, argv[1], 0, 16777215); |
| |
| area = ospf_area_get (ospf, area_id, format); |
| |
| if (area->external_routing == OSPF_AREA_DEFAULT) |
| { |
| vty_out (vty, "The area is neither stub, nor NSSA%s", VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| area->default_cost = cost; |
| |
| p.family = AF_INET; |
| p.prefix.s_addr = OSPF_DEFAULT_DESTINATION; |
| p.prefixlen = 0; |
| if (IS_DEBUG_OSPF_EVENT) |
| zlog_debug ("ospf_abr_announce_stub_defaults(): " |
| "announcing 0.0.0.0/0 to area %s", |
| inet_ntoa (area->area_id)); |
| ospf_abr_announce_network_to_area (&p, area->default_cost, area); |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (no_ospf_area_default_cost, |
| no_ospf_area_default_cost_cmd, |
| "no area (A.B.C.D|<0-4294967295>) default-cost <0-16777215>", |
| NO_STR |
| "OSPF area parameters\n" |
| "OSPF area ID in IP address format\n" |
| "OSPF area ID as a decimal value\n" |
| "Set the summary-default cost of a NSSA or stub area\n" |
| "Stub's advertised default summary cost\n") |
| { |
| struct ospf *ospf = vty->index; |
| struct ospf_area *area; |
| struct in_addr area_id; |
| int format; |
| struct prefix_ipv4 p; |
| |
| VTY_GET_OSPF_AREA_ID_NO_BB ("default-cost", area_id, format, argv[0]); |
| VTY_CHECK_INTEGER_RANGE ("stub default cost", argv[1], 0, OSPF_LS_INFINITY); |
| |
| area = ospf_area_lookup_by_area_id (ospf, area_id); |
| if (area == NULL) |
| return CMD_SUCCESS; |
| |
| if (area->external_routing == OSPF_AREA_DEFAULT) |
| { |
| vty_out (vty, "The area is neither stub, nor NSSA%s", VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| area->default_cost = 1; |
| |
| p.family = AF_INET; |
| p.prefix.s_addr = OSPF_DEFAULT_DESTINATION; |
| p.prefixlen = 0; |
| if (IS_DEBUG_OSPF_EVENT) |
| zlog_debug ("ospf_abr_announce_stub_defaults(): " |
| "announcing 0.0.0.0/0 to area %s", |
| inet_ntoa (area->area_id)); |
| ospf_abr_announce_network_to_area (&p, area->default_cost, area); |
| |
| |
| ospf_area_check_free (ospf, area_id); |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (ospf_area_export_list, |
| ospf_area_export_list_cmd, |
| "area (A.B.C.D|<0-4294967295>) export-list NAME", |
| "OSPF area parameters\n" |
| "OSPF area ID in IP address format\n" |
| "OSPF area ID as a decimal value\n" |
| "Set the filter for networks announced to other areas\n" |
| "Name of the access-list\n") |
| { |
| struct ospf *ospf = vty->index; |
| struct ospf_area *area; |
| struct in_addr area_id; |
| int format; |
| |
| VTY_GET_OSPF_AREA_ID (area_id, format, argv[0]); |
| |
| area = ospf_area_get (ospf, area_id, format); |
| ospf_area_export_list_set (ospf, area, argv[1]); |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (no_ospf_area_export_list, |
| no_ospf_area_export_list_cmd, |
| "no area (A.B.C.D|<0-4294967295>) export-list NAME", |
| NO_STR |
| "OSPF area parameters\n" |
| "OSPF area ID in IP address format\n" |
| "OSPF area ID as a decimal value\n" |
| "Unset the filter for networks announced to other areas\n" |
| "Name of the access-list\n") |
| { |
| struct ospf *ospf = vty->index; |
| struct ospf_area *area; |
| struct in_addr area_id; |
| int format; |
| |
| VTY_GET_OSPF_AREA_ID (area_id, format, argv[0]); |
| |
| area = ospf_area_lookup_by_area_id (ospf, area_id); |
| if (area == NULL) |
| return CMD_SUCCESS; |
| |
| ospf_area_export_list_unset (ospf, area); |
| |
| return CMD_SUCCESS; |
| } |
| |
| |
| DEFUN (ospf_area_import_list, |
| ospf_area_import_list_cmd, |
| "area (A.B.C.D|<0-4294967295>) import-list NAME", |
| "OSPF area parameters\n" |
| "OSPF area ID in IP address format\n" |
| "OSPF area ID as a decimal value\n" |
| "Set the filter for networks from other areas announced to the specified one\n" |
| "Name of the access-list\n") |
| { |
| struct ospf *ospf = vty->index; |
| struct ospf_area *area; |
| struct in_addr area_id; |
| int format; |
| |
| VTY_GET_OSPF_AREA_ID (area_id, format, argv[0]); |
| |
| area = ospf_area_get (ospf, area_id, format); |
| ospf_area_import_list_set (ospf, area, argv[1]); |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (no_ospf_area_import_list, |
| no_ospf_area_import_list_cmd, |
| "no area (A.B.C.D|<0-4294967295>) import-list NAME", |
| NO_STR |
| "OSPF area parameters\n" |
| "OSPF area ID in IP address format\n" |
| "OSPF area ID as a decimal value\n" |
| "Unset the filter for networks announced to other areas\n" |
| "Name of the access-list\n") |
| { |
| struct ospf *ospf = vty->index; |
| struct ospf_area *area; |
| struct in_addr area_id; |
| int format; |
| |
| VTY_GET_OSPF_AREA_ID (area_id, format, argv[0]); |
| |
| area = ospf_area_lookup_by_area_id (ospf, area_id); |
| if (area == NULL) |
| return CMD_SUCCESS; |
| |
| ospf_area_import_list_unset (ospf, area); |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (ospf_area_filter_list, |
| ospf_area_filter_list_cmd, |
| "area (A.B.C.D|<0-4294967295>) filter-list prefix WORD (in|out)", |
| "OSPF area parameters\n" |
| "OSPF area ID in IP address format\n" |
| "OSPF area ID as a decimal value\n" |
| "Filter networks between OSPF areas\n" |
| "Filter prefixes between OSPF areas\n" |
| "Name of an IP prefix-list\n" |
| "Filter networks sent to this area\n" |
| "Filter networks sent from this area\n") |
| { |
| struct ospf *ospf = vty->index; |
| struct ospf_area *area; |
| struct in_addr area_id; |
| struct prefix_list *plist; |
| int format; |
| |
| VTY_GET_OSPF_AREA_ID (area_id, format, argv[0]); |
| |
| area = ospf_area_get (ospf, area_id, format); |
| plist = prefix_list_lookup (AFI_IP, argv[1]); |
| if (strncmp (argv[2], "in", 2) == 0) |
| { |
| PREFIX_LIST_IN (area) = plist; |
| if (PREFIX_NAME_IN (area)) |
| free (PREFIX_NAME_IN (area)); |
| |
| PREFIX_NAME_IN (area) = strdup (argv[1]); |
| ospf_schedule_abr_task (ospf); |
| } |
| else |
| { |
| PREFIX_LIST_OUT (area) = plist; |
| if (PREFIX_NAME_OUT (area)) |
| free (PREFIX_NAME_OUT (area)); |
| |
| PREFIX_NAME_OUT (area) = strdup (argv[1]); |
| ospf_schedule_abr_task (ospf); |
| } |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (no_ospf_area_filter_list, |
| no_ospf_area_filter_list_cmd, |
| "no area (A.B.C.D|<0-4294967295>) filter-list prefix WORD (in|out)", |
| NO_STR |
| "OSPF area parameters\n" |
| "OSPF area ID in IP address format\n" |
| "OSPF area ID as a decimal value\n" |
| "Filter networks between OSPF areas\n" |
| "Filter prefixes between OSPF areas\n" |
| "Name of an IP prefix-list\n" |
| "Filter networks sent to this area\n" |
| "Filter networks sent from this area\n") |
| { |
| struct ospf *ospf = vty->index; |
| struct ospf_area *area; |
| struct in_addr area_id; |
| int format; |
| |
| VTY_GET_OSPF_AREA_ID (area_id, format, argv[0]); |
| |
| if ((area = ospf_area_lookup_by_area_id (ospf, area_id)) == NULL) |
| return CMD_SUCCESS; |
| |
| if (strncmp (argv[2], "in", 2) == 0) |
| { |
| if (PREFIX_NAME_IN (area)) |
| if (strcmp (PREFIX_NAME_IN (area), argv[1]) != 0) |
| return CMD_SUCCESS; |
| |
| PREFIX_LIST_IN (area) = NULL; |
| if (PREFIX_NAME_IN (area)) |
| free (PREFIX_NAME_IN (area)); |
| |
| PREFIX_NAME_IN (area) = NULL; |
| |
| ospf_schedule_abr_task (ospf); |
| } |
| else |
| { |
| if (PREFIX_NAME_OUT (area)) |
| if (strcmp (PREFIX_NAME_OUT (area), argv[1]) != 0) |
| return CMD_SUCCESS; |
| |
| PREFIX_LIST_OUT (area) = NULL; |
| if (PREFIX_NAME_OUT (area)) |
| free (PREFIX_NAME_OUT (area)); |
| |
| PREFIX_NAME_OUT (area) = NULL; |
| |
| ospf_schedule_abr_task (ospf); |
| } |
| |
| return CMD_SUCCESS; |
| } |
| |
| |
| DEFUN (ospf_area_authentication_message_digest, |
| ospf_area_authentication_message_digest_cmd, |
| "area (A.B.C.D|<0-4294967295>) authentication message-digest", |
| "OSPF area parameters\n" |
| "OSPF area ID in IP address format\n" |
| "OSPF area ID as a decimal value\n" |
| "Enable authentication\n" |
| "Use message-digest authentication\n") |
| { |
| struct ospf *ospf = vty->index; |
| struct ospf_area *area; |
| struct in_addr area_id; |
| int format; |
| |
| VTY_GET_OSPF_AREA_ID (area_id, format, argv[0]); |
| |
| area = ospf_area_get (ospf, area_id, format); |
| area->auth_type = OSPF_AUTH_CRYPTOGRAPHIC; |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (ospf_area_authentication, |
| ospf_area_authentication_cmd, |
| "area (A.B.C.D|<0-4294967295>) authentication", |
| "OSPF area parameters\n" |
| "OSPF area ID in IP address format\n" |
| "OSPF area ID as a decimal value\n" |
| "Enable authentication\n") |
| { |
| struct ospf *ospf = vty->index; |
| struct ospf_area *area; |
| struct in_addr area_id; |
| int format; |
| |
| VTY_GET_OSPF_AREA_ID (area_id, format, argv[0]); |
| |
| area = ospf_area_get (ospf, area_id, format); |
| area->auth_type = OSPF_AUTH_SIMPLE; |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (no_ospf_area_authentication, |
| no_ospf_area_authentication_cmd, |
| "no area (A.B.C.D|<0-4294967295>) authentication", |
| NO_STR |
| "OSPF area parameters\n" |
| "OSPF area ID in IP address format\n" |
| "OSPF area ID as a decimal value\n" |
| "Enable authentication\n") |
| { |
| struct ospf *ospf = vty->index; |
| struct ospf_area *area; |
| struct in_addr area_id; |
| int format; |
| |
| VTY_GET_OSPF_AREA_ID (area_id, format, argv[0]); |
| |
| area = ospf_area_lookup_by_area_id (ospf, area_id); |
| if (area == NULL) |
| return CMD_SUCCESS; |
| |
| area->auth_type = OSPF_AUTH_NULL; |
| |
| ospf_area_check_free (ospf, area_id); |
| |
| return CMD_SUCCESS; |
| } |
| |
| |
| DEFUN (ospf_abr_type, |
| ospf_abr_type_cmd, |
| "ospf abr-type (cisco|ibm|shortcut|standard)", |
| "OSPF specific commands\n" |
| "Set OSPF ABR type\n" |
| "Alternative ABR, cisco implementation\n" |
| "Alternative ABR, IBM implementation\n" |
| "Shortcut ABR\n" |
| "Standard behavior (RFC2328)\n") |
| { |
| struct ospf *ospf = vty->index; |
| u_char abr_type = OSPF_ABR_UNKNOWN; |
| |
| if (strncmp (argv[0], "c", 1) == 0) |
| abr_type = OSPF_ABR_CISCO; |
| else if (strncmp (argv[0], "i", 1) == 0) |
| abr_type = OSPF_ABR_IBM; |
| else if (strncmp (argv[0], "sh", 2) == 0) |
| abr_type = OSPF_ABR_SHORTCUT; |
| else if (strncmp (argv[0], "st", 2) == 0) |
| abr_type = OSPF_ABR_STAND; |
| else |
| return CMD_WARNING; |
| |
| /* If ABR type value is changed, schedule ABR task. */ |
| if (ospf->abr_type != abr_type) |
| { |
| ospf->abr_type = abr_type; |
| ospf_schedule_abr_task (ospf); |
| } |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (no_ospf_abr_type, |
| no_ospf_abr_type_cmd, |
| "no ospf abr-type (cisco|ibm|shortcut|standard)", |
| NO_STR |
| "OSPF specific commands\n" |
| "Set OSPF ABR type\n" |
| "Alternative ABR, cisco implementation\n" |
| "Alternative ABR, IBM implementation\n" |
| "Shortcut ABR\n") |
| { |
| struct ospf *ospf = vty->index; |
| u_char abr_type = OSPF_ABR_UNKNOWN; |
| |
| if (strncmp (argv[0], "c", 1) == 0) |
| abr_type = OSPF_ABR_CISCO; |
| else if (strncmp (argv[0], "i", 1) == 0) |
| abr_type = OSPF_ABR_IBM; |
| else if (strncmp (argv[0], "sh", 2) == 0) |
| abr_type = OSPF_ABR_SHORTCUT; |
| else if (strncmp (argv[0], "st", 2) == 0) |
| abr_type = OSPF_ABR_STAND; |
| else |
| return CMD_WARNING; |
| |
| /* If ABR type value is changed, schedule ABR task. */ |
| if (ospf->abr_type == abr_type) |
| { |
| ospf->abr_type = OSPF_ABR_DEFAULT; |
| ospf_schedule_abr_task (ospf); |
| } |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (ospf_log_adjacency_changes, |
| ospf_log_adjacency_changes_cmd, |
| "log-adjacency-changes", |
| "Log changes in adjacency state\n") |
| { |
| struct ospf *ospf = vty->index; |
| |
| SET_FLAG(ospf->config, OSPF_LOG_ADJACENCY_CHANGES); |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (ospf_log_adjacency_changes_detail, |
| ospf_log_adjacency_changes_detail_cmd, |
| "log-adjacency-changes detail", |
| "Log changes in adjacency state\n" |
| "Log all state changes\n") |
| { |
| struct ospf *ospf = vty->index; |
| |
| SET_FLAG(ospf->config, OSPF_LOG_ADJACENCY_CHANGES); |
| SET_FLAG(ospf->config, OSPF_LOG_ADJACENCY_DETAIL); |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (no_ospf_log_adjacency_changes, |
| no_ospf_log_adjacency_changes_cmd, |
| "no log-adjacency-changes", |
| NO_STR |
| "Log changes in adjacency state\n") |
| { |
| struct ospf *ospf = vty->index; |
| |
| UNSET_FLAG(ospf->config, OSPF_LOG_ADJACENCY_DETAIL); |
| UNSET_FLAG(ospf->config, OSPF_LOG_ADJACENCY_CHANGES); |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (no_ospf_log_adjacency_changes_detail, |
| no_ospf_log_adjacency_changes_detail_cmd, |
| "no log-adjacency-changes detail", |
| NO_STR |
| "Log changes in adjacency state\n" |
| "Log all state changes\n") |
| { |
| struct ospf *ospf = vty->index; |
| |
| UNSET_FLAG(ospf->config, OSPF_LOG_ADJACENCY_DETAIL); |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (ospf_compatible_rfc1583, |
| ospf_compatible_rfc1583_cmd, |
| "compatible rfc1583", |
| "OSPF compatibility list\n" |
| "compatible with RFC 1583\n") |
| { |
| struct ospf *ospf = vty->index; |
| |
| if (!CHECK_FLAG (ospf->config, OSPF_RFC1583_COMPATIBLE)) |
| { |
| SET_FLAG (ospf->config, OSPF_RFC1583_COMPATIBLE); |
| ospf_spf_calculate_schedule (ospf, SPF_FLAG_CONFIG_CHANGE); |
| } |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (no_ospf_compatible_rfc1583, |
| no_ospf_compatible_rfc1583_cmd, |
| "no compatible rfc1583", |
| NO_STR |
| "OSPF compatibility list\n" |
| "compatible with RFC 1583\n") |
| { |
| struct ospf *ospf = vty->index; |
| |
| if (CHECK_FLAG (ospf->config, OSPF_RFC1583_COMPATIBLE)) |
| { |
| UNSET_FLAG (ospf->config, OSPF_RFC1583_COMPATIBLE); |
| ospf_spf_calculate_schedule (ospf, SPF_FLAG_CONFIG_CHANGE); |
| } |
| return CMD_SUCCESS; |
| } |
| |
| ALIAS (ospf_compatible_rfc1583, |
| ospf_rfc1583_flag_cmd, |
| "ospf rfc1583compatibility", |
| "OSPF specific commands\n" |
| "Enable the RFC1583Compatibility flag\n") |
| |
| ALIAS (no_ospf_compatible_rfc1583, |
| no_ospf_rfc1583_flag_cmd, |
| "no ospf rfc1583compatibility", |
| NO_STR |
| "OSPF specific commands\n" |
| "Disable the RFC1583Compatibility flag\n") |
| |
| static int |
| ospf_timers_spf_set (struct vty *vty, unsigned int delay, |
| unsigned int hold, |
| unsigned int max) |
| { |
| struct ospf *ospf = vty->index; |
| |
| ospf->spf_delay = delay; |
| ospf->spf_holdtime = hold; |
| ospf->spf_max_holdtime = max; |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (ospf_timers_throttle_spf, |
| ospf_timers_throttle_spf_cmd, |
| "timers throttle spf <0-600000> <0-600000> <0-600000>", |
| "Adjust routing timers\n" |
| "Throttling adaptive timer\n" |
| "OSPF SPF timers\n" |
| "Delay (msec) from first change received till SPF calculation\n" |
| "Initial hold time (msec) between consecutive SPF calculations\n" |
| "Maximum hold time (msec)\n") |
| { |
| unsigned int delay, hold, max; |
| |
| if (argc != 3) |
| { |
| vty_out (vty, "Insufficient arguments%s", VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| VTY_GET_INTEGER_RANGE ("SPF delay timer", delay, argv[0], 0, 600000); |
| VTY_GET_INTEGER_RANGE ("SPF hold timer", hold, argv[1], 0, 600000); |
| VTY_GET_INTEGER_RANGE ("SPF max-hold timer", max, argv[2], 0, 600000); |
| |
| return ospf_timers_spf_set (vty, delay, hold, max); |
| } |
| |
| DEFUN_DEPRECATED (ospf_timers_spf, |
| ospf_timers_spf_cmd, |
| "timers spf <0-4294967295> <0-4294967295>", |
| "Adjust routing timers\n" |
| "OSPF SPF timers\n" |
| "Delay (s) between receiving a change to SPF calculation\n" |
| "Hold time (s) between consecutive SPF calculations\n") |
| { |
| unsigned int delay, hold; |
| |
| if (argc != 2) |
| { |
| vty_out (vty, "Insufficient number of arguments%s", VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| VTY_GET_INTEGER ("SPF delay timer", delay, argv[0]); |
| VTY_GET_INTEGER ("SPF hold timer", hold, argv[1]); |
| |
| /* truncate down the second values if they're greater than 600000ms */ |
| if (delay > (600000 / 1000)) |
| delay = 600000; |
| else if (delay == 0) |
| /* 0s delay was probably specified because of lack of ms resolution */ |
| delay = OSPF_SPF_DELAY_DEFAULT; |
| if (hold > (600000 / 1000)) |
| hold = 600000; |
| |
| return ospf_timers_spf_set (vty, delay * 1000, hold * 1000, hold * 1000); |
| } |
| |
| DEFUN (no_ospf_timers_throttle_spf, |
| no_ospf_timers_throttle_spf_cmd, |
| "no timers throttle spf", |
| NO_STR |
| "Adjust routing timers\n" |
| "Throttling adaptive timer\n" |
| "OSPF SPF timers\n") |
| { |
| return ospf_timers_spf_set (vty, |
| OSPF_SPF_DELAY_DEFAULT, |
| OSPF_SPF_HOLDTIME_DEFAULT, |
| OSPF_SPF_MAX_HOLDTIME_DEFAULT); |
| } |
| |
| ALIAS_DEPRECATED (no_ospf_timers_throttle_spf, |
| no_ospf_timers_spf_cmd, |
| "no timers spf", |
| NO_STR |
| "Adjust routing timers\n" |
| "OSPF SPF timers\n") |
| |
| DEFUN (ospf_neighbor, |
| ospf_neighbor_cmd, |
| "neighbor A.B.C.D", |
| NEIGHBOR_STR |
| "Neighbor IP address\n") |
| { |
| struct ospf *ospf = vty->index; |
| struct in_addr nbr_addr; |
| unsigned int priority = OSPF_NEIGHBOR_PRIORITY_DEFAULT; |
| unsigned int interval = OSPF_POLL_INTERVAL_DEFAULT; |
| |
| VTY_GET_IPV4_ADDRESS ("neighbor address", nbr_addr, argv[0]); |
| |
| if (argc > 1) |
| VTY_GET_INTEGER_RANGE ("neighbor priority", priority, argv[1], 0, 255); |
| |
| if (argc > 2) |
| VTY_GET_INTEGER_RANGE ("poll interval", interval, argv[2], 1, 65535); |
| |
| ospf_nbr_nbma_set (ospf, nbr_addr); |
| if (argc > 1) |
| ospf_nbr_nbma_priority_set (ospf, nbr_addr, priority); |
| if (argc > 2) |
| ospf_nbr_nbma_poll_interval_set (ospf, nbr_addr, interval); |
| |
| return CMD_SUCCESS; |
| } |
| |
| ALIAS (ospf_neighbor, |
| ospf_neighbor_priority_poll_interval_cmd, |
| "neighbor A.B.C.D priority <0-255> poll-interval <1-65535>", |
| NEIGHBOR_STR |
| "Neighbor IP address\n" |
| "Neighbor Priority\n" |
| "Priority\n" |
| "Dead Neighbor Polling interval\n" |
| "Seconds\n") |
| |
| ALIAS (ospf_neighbor, |
| ospf_neighbor_priority_cmd, |
| "neighbor A.B.C.D priority <0-255>", |
| NEIGHBOR_STR |
| "Neighbor IP address\n" |
| "Neighbor Priority\n" |
| "Seconds\n") |
| |
| DEFUN (ospf_neighbor_poll_interval, |
| ospf_neighbor_poll_interval_cmd, |
| "neighbor A.B.C.D poll-interval <1-65535>", |
| NEIGHBOR_STR |
| "Neighbor IP address\n" |
| "Dead Neighbor Polling interval\n" |
| "Seconds\n") |
| { |
| struct ospf *ospf = vty->index; |
| struct in_addr nbr_addr; |
| unsigned int priority = OSPF_NEIGHBOR_PRIORITY_DEFAULT; |
| unsigned int interval = OSPF_POLL_INTERVAL_DEFAULT; |
| |
| VTY_GET_IPV4_ADDRESS ("neighbor address", nbr_addr, argv[0]); |
| |
| if (argc > 1) |
| VTY_GET_INTEGER_RANGE ("poll interval", interval, argv[1], 1, 65535); |
| |
| if (argc > 2) |
| VTY_GET_INTEGER_RANGE ("neighbor priority", priority, argv[2], 0, 255); |
| |
| ospf_nbr_nbma_set (ospf, nbr_addr); |
| if (argc > 1) |
| ospf_nbr_nbma_poll_interval_set (ospf, nbr_addr, interval); |
| if (argc > 2) |
| ospf_nbr_nbma_priority_set (ospf, nbr_addr, priority); |
| |
| return CMD_SUCCESS; |
| } |
| |
| ALIAS (ospf_neighbor_poll_interval, |
| ospf_neighbor_poll_interval_priority_cmd, |
| "neighbor A.B.C.D poll-interval <1-65535> priority <0-255>", |
| NEIGHBOR_STR |
| "Neighbor address\n" |
| "OSPF dead-router polling interval\n" |
| "Seconds\n" |
| "OSPF priority of non-broadcast neighbor\n" |
| "Priority\n") |
| |
| DEFUN (no_ospf_neighbor, |
| no_ospf_neighbor_cmd, |
| "no neighbor A.B.C.D", |
| NO_STR |
| NEIGHBOR_STR |
| "Neighbor IP address\n") |
| { |
| struct ospf *ospf = vty->index; |
| struct in_addr nbr_addr; |
| |
| VTY_GET_IPV4_ADDRESS ("neighbor address", nbr_addr, argv[0]); |
| |
| (void)ospf_nbr_nbma_unset (ospf, nbr_addr); |
| |
| return CMD_SUCCESS; |
| } |
| |
| ALIAS (no_ospf_neighbor, |
| no_ospf_neighbor_priority_cmd, |
| "no neighbor A.B.C.D priority <0-255>", |
| NO_STR |
| NEIGHBOR_STR |
| "Neighbor IP address\n" |
| "Neighbor Priority\n" |
| "Priority\n") |
| |
| ALIAS (no_ospf_neighbor, |
| no_ospf_neighbor_poll_interval_cmd, |
| "no neighbor A.B.C.D poll-interval <1-65535>", |
| NO_STR |
| NEIGHBOR_STR |
| "Neighbor IP address\n" |
| "Dead Neighbor Polling interval\n" |
| "Seconds\n") |
| |
| ALIAS (no_ospf_neighbor, |
| no_ospf_neighbor_priority_pollinterval_cmd, |
| "no neighbor A.B.C.D priority <0-255> poll-interval <1-65535>", |
| NO_STR |
| NEIGHBOR_STR |
| "Neighbor IP address\n" |
| "Neighbor Priority\n" |
| "Priority\n" |
| "Dead Neighbor Polling interval\n" |
| "Seconds\n") |
| |
| |
| DEFUN (ospf_refresh_timer, ospf_refresh_timer_cmd, |
| "refresh timer <10-1800>", |
| "Adjust refresh parameters\n" |
| "Set refresh timer\n" |
| "Timer value in seconds\n") |
| { |
| struct ospf *ospf = vty->index; |
| unsigned int interval; |
| |
| VTY_GET_INTEGER_RANGE ("refresh timer", interval, argv[0], 10, 1800); |
| interval = (interval / 10) * 10; |
| |
| ospf_timers_refresh_set (ospf, interval); |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (no_ospf_refresh_timer, no_ospf_refresh_timer_val_cmd, |
| "no refresh timer <10-1800>", |
| "Adjust refresh parameters\n" |
| "Unset refresh timer\n" |
| "Timer value in seconds\n") |
| { |
| struct ospf *ospf = vty->index; |
| unsigned int interval; |
| |
| if (argc == 1) |
| { |
| VTY_GET_INTEGER_RANGE ("refresh timer", interval, argv[0], 10, 1800); |
| |
| if (ospf->lsa_refresh_interval != interval || |
| interval == OSPF_LSA_REFRESH_INTERVAL_DEFAULT) |
| return CMD_SUCCESS; |
| } |
| |
| ospf_timers_refresh_unset (ospf); |
| |
| return CMD_SUCCESS; |
| } |
| |
| ALIAS (no_ospf_refresh_timer, |
| no_ospf_refresh_timer_cmd, |
| "no refresh timer", |
| "Adjust refresh parameters\n" |
| "Unset refresh timer\n") |
| |
| DEFUN (ospf_auto_cost_reference_bandwidth, |
| ospf_auto_cost_reference_bandwidth_cmd, |
| "auto-cost reference-bandwidth <1-4294967>", |
| "Calculate OSPF interface cost according to bandwidth\n" |
| "Use reference bandwidth method to assign OSPF cost\n" |
| "The reference bandwidth in terms of Mbits per second\n") |
| { |
| struct ospf *ospf = vty->index; |
| u_int32_t refbw; |
| struct listnode *node; |
| struct interface *ifp; |
| |
| refbw = strtol (argv[0], NULL, 10); |
| if (refbw < 1 || refbw > 4294967) |
| { |
| vty_out (vty, "reference-bandwidth value is invalid%s", VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| /* If reference bandwidth is changed. */ |
| if ((refbw * 1000) == ospf->ref_bandwidth) |
| return CMD_SUCCESS; |
| |
| ospf->ref_bandwidth = refbw * 1000; |
| for (ALL_LIST_ELEMENTS_RO (om->iflist, node, ifp)) |
| ospf_if_recalculate_output_cost (ifp); |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (no_ospf_auto_cost_reference_bandwidth, |
| no_ospf_auto_cost_reference_bandwidth_cmd, |
| "no auto-cost reference-bandwidth", |
| NO_STR |
| "Calculate OSPF interface cost according to bandwidth\n" |
| "Use reference bandwidth method to assign OSPF cost\n") |
| { |
| struct ospf *ospf = vty->index; |
| struct listnode *node, *nnode; |
| struct interface *ifp; |
| |
| if (ospf->ref_bandwidth == OSPF_DEFAULT_REF_BANDWIDTH) |
| return CMD_SUCCESS; |
| |
| ospf->ref_bandwidth = OSPF_DEFAULT_REF_BANDWIDTH; |
| vty_out (vty, "%% OSPF: Reference bandwidth is changed.%s", VTY_NEWLINE); |
| vty_out (vty, " Please ensure reference bandwidth is consistent across all routers%s", VTY_NEWLINE); |
| |
| for (ALL_LIST_ELEMENTS (om->iflist, node, nnode, ifp)) |
| ospf_if_recalculate_output_cost (ifp); |
| |
| return CMD_SUCCESS; |
| } |
| |
| const char *ospf_abr_type_descr_str[] = |
| { |
| "Unknown", |
| "Standard (RFC2328)", |
| "Alternative IBM", |
| "Alternative Cisco", |
| "Alternative Shortcut" |
| }; |
| |
| const char *ospf_shortcut_mode_descr_str[] = |
| { |
| "Default", |
| "Enabled", |
| "Disabled" |
| }; |
| |
| |
| |
| static void |
| show_ip_ospf_area (struct vty *vty, struct ospf_area *area) |
| { |
| /* Show Area ID. */ |
| vty_out (vty, " Area ID: %s", inet_ntoa (area->area_id)); |
| |
| /* Show Area type/mode. */ |
| if (OSPF_IS_AREA_BACKBONE (area)) |
| vty_out (vty, " (Backbone)%s", VTY_NEWLINE); |
| else |
| { |
| if (area->external_routing == OSPF_AREA_STUB) |
| vty_out (vty, " (Stub%s%s)", |
| area->no_summary ? ", no summary" : "", |
| area->shortcut_configured ? "; " : ""); |
| |
| else if (area->external_routing == OSPF_AREA_NSSA) |
| vty_out (vty, " (NSSA%s%s)", |
| area->no_summary ? ", no summary" : "", |
| area->shortcut_configured ? "; " : ""); |
| |
| vty_out (vty, "%s", VTY_NEWLINE); |
| vty_out (vty, " Shortcutting mode: %s", |
| ospf_shortcut_mode_descr_str[area->shortcut_configured]); |
| vty_out (vty, ", S-bit consensus: %s%s", |
| area->shortcut_capability ? "ok" : "no", VTY_NEWLINE); |
| } |
| |
| /* Show number of interfaces. */ |
| vty_out (vty, " Number of interfaces in this area: Total: %d, " |
| "Active: %d%s", listcount (area->oiflist), |
| area->act_ints, VTY_NEWLINE); |
| |
| if (area->external_routing == OSPF_AREA_NSSA) |
| { |
| vty_out (vty, " It is an NSSA configuration. %s Elected NSSA/ABR performs type-7/type-5 LSA translation. %s", VTY_NEWLINE, VTY_NEWLINE); |
| if (! IS_OSPF_ABR (area->ospf)) |
| vty_out (vty, " It is not ABR, therefore not Translator. %s", |
| VTY_NEWLINE); |
| else if (area->NSSATranslatorState) |
| { |
| vty_out (vty, " We are an ABR and "); |
| if (area->NSSATranslatorRole == OSPF_NSSA_ROLE_CANDIDATE) |
| vty_out (vty, "the NSSA Elected Translator. %s", |
| VTY_NEWLINE); |
| else if (area->NSSATranslatorRole == OSPF_NSSA_ROLE_ALWAYS) |
| vty_out (vty, "always an NSSA Translator. %s", |
| VTY_NEWLINE); |
| } |
| else |
| { |
| vty_out (vty, " We are an ABR, but "); |
| if (area->NSSATranslatorRole == OSPF_NSSA_ROLE_CANDIDATE) |
| vty_out (vty, "not the NSSA Elected Translator. %s", |
| VTY_NEWLINE); |
| else |
| vty_out (vty, "never an NSSA Translator. %s", |
| VTY_NEWLINE); |
| } |
| } |
| /* Stub-router state for this area */ |
| if (CHECK_FLAG (area->stub_router_state, OSPF_AREA_IS_STUB_ROUTED)) |
| { |
| char timebuf[OSPF_TIME_DUMP_SIZE]; |
| vty_out (vty, " Originating stub / maximum-distance Router-LSA%s", |
| VTY_NEWLINE); |
| if (CHECK_FLAG(area->stub_router_state, OSPF_AREA_ADMIN_STUB_ROUTED)) |
| vty_out (vty, " Administratively activated (indefinitely)%s", |
| VTY_NEWLINE); |
| if (area->t_stub_router) |
| vty_out (vty, " Active from startup, %s remaining%s", |
| ospf_timer_dump (area->t_stub_router, timebuf, |
| sizeof(timebuf)), VTY_NEWLINE); |
| } |
| |
| /* Show number of fully adjacent neighbors. */ |
| vty_out (vty, " Number of fully adjacent neighbors in this area:" |
| " %d%s", area->full_nbrs, VTY_NEWLINE); |
| |
| /* Show authentication type. */ |
| vty_out (vty, " Area has "); |
| if (area->auth_type == OSPF_AUTH_NULL) |
| vty_out (vty, "no authentication%s", VTY_NEWLINE); |
| else if (area->auth_type == OSPF_AUTH_SIMPLE) |
| vty_out (vty, "simple password authentication%s", VTY_NEWLINE); |
| else if (area->auth_type == OSPF_AUTH_CRYPTOGRAPHIC) |
| vty_out (vty, "message digest authentication%s", VTY_NEWLINE); |
| |
| if (!OSPF_IS_AREA_BACKBONE (area)) |
| vty_out (vty, " Number of full virtual adjacencies going through" |
| " this area: %d%s", area->full_vls, VTY_NEWLINE); |
| |
| /* Show SPF calculation times. */ |
| vty_out (vty, " SPF algorithm executed %d times%s", |
| area->spf_calculation, VTY_NEWLINE); |
| |
| /* Show number of LSA. */ |
| vty_out (vty, " Number of LSA %ld%s", area->lsdb->total, VTY_NEWLINE); |
| vty_out (vty, " Number of router LSA %ld. Checksum Sum 0x%08x%s", |
| ospf_lsdb_count (area->lsdb, OSPF_ROUTER_LSA), |
| ospf_lsdb_checksum (area->lsdb, OSPF_ROUTER_LSA), VTY_NEWLINE); |
| vty_out (vty, " Number of network LSA %ld. Checksum Sum 0x%08x%s", |
| ospf_lsdb_count (area->lsdb, OSPF_NETWORK_LSA), |
| ospf_lsdb_checksum (area->lsdb, OSPF_NETWORK_LSA), VTY_NEWLINE); |
| vty_out (vty, " Number of summary LSA %ld. Checksum Sum 0x%08x%s", |
| ospf_lsdb_count (area->lsdb, OSPF_SUMMARY_LSA), |
| ospf_lsdb_checksum (area->lsdb, OSPF_SUMMARY_LSA), VTY_NEWLINE); |
| vty_out (vty, " Number of ASBR summary LSA %ld. Checksum Sum 0x%08x%s", |
| ospf_lsdb_count (area->lsdb, OSPF_ASBR_SUMMARY_LSA), |
| ospf_lsdb_checksum (area->lsdb, OSPF_ASBR_SUMMARY_LSA), VTY_NEWLINE); |
| vty_out (vty, " Number of NSSA LSA %ld. Checksum Sum 0x%08x%s", |
| ospf_lsdb_count (area->lsdb, OSPF_AS_NSSA_LSA), |
| ospf_lsdb_checksum (area->lsdb, OSPF_AS_NSSA_LSA), VTY_NEWLINE); |
| #ifdef HAVE_OPAQUE_LSA |
| vty_out (vty, " Number of opaque link LSA %ld. Checksum Sum 0x%08x%s", |
| ospf_lsdb_count (area->lsdb, OSPF_OPAQUE_LINK_LSA), |
| ospf_lsdb_checksum (area->lsdb, OSPF_OPAQUE_LINK_LSA), VTY_NEWLINE); |
| vty_out (vty, " Number of opaque area LSA %ld. Checksum Sum 0x%08x%s", |
| ospf_lsdb_count (area->lsdb, OSPF_OPAQUE_AREA_LSA), |
| ospf_lsdb_checksum (area->lsdb, OSPF_OPAQUE_AREA_LSA), VTY_NEWLINE); |
| #endif /* HAVE_OPAQUE_LSA */ |
| vty_out (vty, "%s", VTY_NEWLINE); |
| } |
| |
| DEFUN (show_ip_ospf, |
| show_ip_ospf_cmd, |
| "show ip ospf", |
| SHOW_STR |
| IP_STR |
| "OSPF information\n") |
| { |
| struct listnode *node, *nnode; |
| struct ospf_area * area; |
| struct ospf *ospf; |
| struct timeval result; |
| char timebuf[OSPF_TIME_DUMP_SIZE]; |
| |
| /* Check OSPF is enable. */ |
| ospf = ospf_lookup (); |
| if (ospf == NULL) |
| { |
| vty_out (vty, " OSPF Routing Process not enabled%s", VTY_NEWLINE); |
| return CMD_SUCCESS; |
| } |
| |
| /* Show Router ID. */ |
| vty_out (vty, " OSPF Routing Process, Router ID: %s%s", |
| inet_ntoa (ospf->router_id), |
| VTY_NEWLINE); |
| |
| /* Graceful shutdown */ |
| if (ospf->t_deferred_shutdown) |
| vty_out (vty, " Deferred shutdown in progress, %s remaining%s", |
| ospf_timer_dump (ospf->t_deferred_shutdown, |
| timebuf, sizeof (timebuf)), VTY_NEWLINE); |
| /* Show capability. */ |
| vty_out (vty, " Supports only single TOS (TOS0) routes%s", VTY_NEWLINE); |
| vty_out (vty, " This implementation conforms to RFC2328%s", VTY_NEWLINE); |
| vty_out (vty, " RFC1583Compatibility flag is %s%s", |
| CHECK_FLAG (ospf->config, OSPF_RFC1583_COMPATIBLE) ? |
| "enabled" : "disabled", VTY_NEWLINE); |
| #ifdef HAVE_OPAQUE_LSA |
| vty_out (vty, " OpaqueCapability flag is %s%s%s", |
| CHECK_FLAG (ospf->config, OSPF_OPAQUE_CAPABLE) ? |
| "enabled" : "disabled", |
| IS_OPAQUE_LSA_ORIGINATION_BLOCKED (ospf->opaque) ? |
| " (origination blocked)" : "", |
| VTY_NEWLINE); |
| #endif /* HAVE_OPAQUE_LSA */ |
| |
| /* Show stub-router configuration */ |
| if (ospf->stub_router_startup_time != OSPF_STUB_ROUTER_UNCONFIGURED |
| || ospf->stub_router_shutdown_time != OSPF_STUB_ROUTER_UNCONFIGURED) |
| { |
| vty_out (vty, " Stub router advertisement is configured%s", |
| VTY_NEWLINE); |
| if (ospf->stub_router_startup_time != OSPF_STUB_ROUTER_UNCONFIGURED) |
| vty_out (vty, " Enabled for %us after start-up%s", |
| ospf->stub_router_startup_time, VTY_NEWLINE); |
| if (ospf->stub_router_shutdown_time != OSPF_STUB_ROUTER_UNCONFIGURED) |
| vty_out (vty, " Enabled for %us prior to full shutdown%s", |
| ospf->stub_router_shutdown_time, VTY_NEWLINE); |
| } |
| |
| /* Show SPF timers. */ |
| vty_out (vty, " Initial SPF scheduling delay %d millisec(s)%s" |
| " Minimum hold time between consecutive SPFs %d millisec(s)%s" |
| " Maximum hold time between consecutive SPFs %d millisec(s)%s" |
| " Hold time multiplier is currently %d%s", |
| ospf->spf_delay, VTY_NEWLINE, |
| ospf->spf_holdtime, VTY_NEWLINE, |
| ospf->spf_max_holdtime, VTY_NEWLINE, |
| ospf->spf_hold_multiplier, VTY_NEWLINE); |
| vty_out (vty, " SPF algorithm "); |
| if (ospf->ts_spf.tv_sec || ospf->ts_spf.tv_usec) |
| { |
| result = tv_sub (recent_relative_time (), ospf->ts_spf); |
| vty_out (vty, "last executed %s ago%s", |
| ospf_timeval_dump (&result, timebuf, sizeof (timebuf)), |
| VTY_NEWLINE); |
| vty_out (vty, " Last SPF duration %s%s", |
| ospf_timeval_dump (&ospf->ts_spf_duration, timebuf, sizeof (timebuf)), |
| VTY_NEWLINE); |
| } |
| else |
| vty_out (vty, "has not been run%s", VTY_NEWLINE); |
| vty_out (vty, " SPF timer %s%s%s", |
| (ospf->t_spf_calc ? "due in " : "is "), |
| ospf_timer_dump (ospf->t_spf_calc, timebuf, sizeof (timebuf)), |
| VTY_NEWLINE); |
| |
| /* Show refresh parameters. */ |
| vty_out (vty, " Refresh timer %d secs%s", |
| ospf->lsa_refresh_interval, VTY_NEWLINE); |
| |
| /* Show ABR/ASBR flags. */ |
| if (CHECK_FLAG (ospf->flags, OSPF_FLAG_ABR)) |
| vty_out (vty, " This router is an ABR, ABR type is: %s%s", |
| ospf_abr_type_descr_str[ospf->abr_type], VTY_NEWLINE); |
| |
| if (CHECK_FLAG (ospf->flags, OSPF_FLAG_ASBR)) |
| vty_out (vty, " This router is an ASBR " |
| "(injecting external routing information)%s", VTY_NEWLINE); |
| |
| /* Show Number of AS-external-LSAs. */ |
| vty_out (vty, " Number of external LSA %ld. Checksum Sum 0x%08x%s", |
| ospf_lsdb_count (ospf->lsdb, OSPF_AS_EXTERNAL_LSA), |
| ospf_lsdb_checksum (ospf->lsdb, OSPF_AS_EXTERNAL_LSA), VTY_NEWLINE); |
| #ifdef HAVE_OPAQUE_LSA |
| vty_out (vty, " Number of opaque AS LSA %ld. Checksum Sum 0x%08x%s", |
| ospf_lsdb_count (ospf->lsdb, OSPF_OPAQUE_AS_LSA), |
| ospf_lsdb_checksum (ospf->lsdb, OSPF_OPAQUE_AS_LSA), VTY_NEWLINE); |
| #endif /* HAVE_OPAQUE_LSA */ |
| /* Show number of areas attached. */ |
| vty_out (vty, " Number of areas attached to this router: %d%s", |
| listcount (ospf->areas), VTY_NEWLINE); |
| |
| if (CHECK_FLAG(ospf->config, OSPF_LOG_ADJACENCY_CHANGES)) |
| { |
| if (CHECK_FLAG(ospf->config, OSPF_LOG_ADJACENCY_DETAIL)) |
| vty_out(vty, " All adjacency changes are logged%s",VTY_NEWLINE); |
| else |
| vty_out(vty, " Adjacency changes are logged%s",VTY_NEWLINE); |
| } |
| |
| vty_out (vty, "%s",VTY_NEWLINE); |
| |
| /* Show each area status. */ |
| for (ALL_LIST_ELEMENTS (ospf->areas, node, nnode, area)) |
| show_ip_ospf_area (vty, area); |
| |
| return CMD_SUCCESS; |
| } |
| |
| |
| static void |
| show_ip_ospf_interface_sub (struct vty *vty, struct ospf *ospf, |
| struct interface *ifp) |
| { |
| int is_up; |
| struct ospf_neighbor *nbr; |
| struct route_node *rn; |
| |
| /* Is interface up? */ |
| vty_out (vty, "%s is %s%s", ifp->name, |
| ((is_up = if_is_operative(ifp)) ? "up" : "down"), VTY_NEWLINE); |
| vty_out (vty, " ifindex %u, MTU %u bytes, BW %u Kbit %s%s", |
| ifp->ifindex, ifp->mtu, ifp->bandwidth, if_flag_dump(ifp->flags), |
| VTY_NEWLINE); |
| |
| /* Is interface OSPF enabled? */ |
| if (ospf_oi_count(ifp) == 0) |
| { |
| vty_out (vty, " OSPF not enabled on this interface%s", VTY_NEWLINE); |
| return; |
| } |
| else if (!is_up) |
| { |
| vty_out (vty, " OSPF is enabled, but not running on this interface%s", |
| VTY_NEWLINE); |
| return; |
| } |
| |
| for (rn = route_top (IF_OIFS (ifp)); rn; rn = route_next (rn)) |
| { |
| struct ospf_interface *oi = rn->info; |
| |
| if (oi == NULL) |
| continue; |
| |
| /* Show OSPF interface information. */ |
| vty_out (vty, " Internet Address %s/%d,", |
| inet_ntoa (oi->address->u.prefix4), oi->address->prefixlen); |
| |
| if (oi->connected->destination || oi->type == OSPF_IFTYPE_VIRTUALLINK) |
| { |
| struct in_addr *dest; |
| const char *dstr; |
| |
| if (CONNECTED_PEER(oi->connected) |
| || oi->type == OSPF_IFTYPE_VIRTUALLINK) |
| dstr = "Peer"; |
| else |
| dstr = "Broadcast"; |
| |
| /* For Vlinks, showing the peer address is probably more |
| * informative than the local interface that is being used |
| */ |
| if (oi->type == OSPF_IFTYPE_VIRTUALLINK) |
| dest = &oi->vl_data->peer_addr; |
| else |
| dest = &oi->connected->destination->u.prefix4; |
| |
| vty_out (vty, " %s %s,", dstr, inet_ntoa (*dest)); |
| } |
| |
| vty_out (vty, " Area %s%s", ospf_area_desc_string (oi->area), |
| VTY_NEWLINE); |
| |
| vty_out (vty, " MTU mismatch detection:%s%s", |
| OSPF_IF_PARAM(oi, mtu_ignore) ? "disabled" : "enabled", VTY_NEWLINE); |
| |
| vty_out (vty, " Router ID %s, Network Type %s, Cost: %d%s", |
| inet_ntoa (ospf->router_id), ospf_network_type_str[oi->type], |
| oi->output_cost, VTY_NEWLINE); |
| |
| vty_out (vty, " Transmit Delay is %d sec, State %s, Priority %d%s", |
| OSPF_IF_PARAM (oi,transmit_delay), LOOKUP (ospf_ism_state_msg, oi->state), |
| PRIORITY (oi), VTY_NEWLINE); |
| |
| /* Show DR information. */ |
| if (DR (oi).s_addr == 0) |
| vty_out (vty, " No designated router on this network%s", VTY_NEWLINE); |
| else |
| { |
| nbr = ospf_nbr_lookup_by_addr (oi->nbrs, &DR (oi)); |
| if (nbr == NULL) |
| vty_out (vty, " No designated router on this network%s", VTY_NEWLINE); |
| else |
| { |
| vty_out (vty, " Designated Router (ID) %s,", |
| inet_ntoa (nbr->router_id)); |
| vty_out (vty, " Interface Address %s%s", |
| inet_ntoa (nbr->address.u.prefix4), VTY_NEWLINE); |
| } |
| } |
| |
| /* Show BDR information. */ |
| if (BDR (oi).s_addr == 0) |
| vty_out (vty, " No backup designated router on this network%s", |
| VTY_NEWLINE); |
| else |
| { |
| nbr = ospf_nbr_lookup_by_addr (oi->nbrs, &BDR (oi)); |
| if (nbr == NULL) |
| vty_out (vty, " No backup designated router on this network%s", |
| VTY_NEWLINE); |
| else |
| { |
| vty_out (vty, " Backup Designated Router (ID) %s,", |
| inet_ntoa (nbr->router_id)); |
| vty_out (vty, " Interface Address %s%s", |
| inet_ntoa (nbr->address.u.prefix4), VTY_NEWLINE); |
| } |
| } |
| |
| /* Next network-LSA sequence number we'll use, if we're elected DR */ |
| if (oi->params && ntohl (oi->params->network_lsa_seqnum) |
| != OSPF_INITIAL_SEQUENCE_NUMBER) |
| vty_out (vty, " Saved Network-LSA sequence number 0x%x%s", |
| ntohl (oi->params->network_lsa_seqnum), VTY_NEWLINE); |
| |
| vty_out (vty, " Multicast group memberships:"); |
| if (OI_MEMBER_CHECK(oi, MEMBER_ALLROUTERS) |
| || OI_MEMBER_CHECK(oi, MEMBER_DROUTERS)) |
| { |
| if (OI_MEMBER_CHECK(oi, MEMBER_ALLROUTERS)) |
| vty_out (vty, " OSPFAllRouters"); |
| if (OI_MEMBER_CHECK(oi, MEMBER_DROUTERS)) |
| vty_out (vty, " OSPFDesignatedRouters"); |
| } |
| else |
| vty_out (vty, " <None>"); |
| vty_out (vty, "%s", VTY_NEWLINE); |
| |
| vty_out (vty, " Timer intervals configured,"); |
| vty_out (vty, " Hello "); |
| if (OSPF_IF_PARAM (oi, fast_hello) == 0) |
| vty_out (vty, "%ds,", OSPF_IF_PARAM (oi, v_hello)); |
| else |
| vty_out (vty, "%dms,", 1000 / OSPF_IF_PARAM (oi, fast_hello)); |
| vty_out (vty, " Dead %ds, Wait %ds, Retransmit %d%s", |
| OSPF_IF_PARAM (oi, v_wait), |
| OSPF_IF_PARAM (oi, v_wait), |
| OSPF_IF_PARAM (oi, retransmit_interval), |
| VTY_NEWLINE); |
| |
| if (OSPF_IF_PASSIVE_STATUS (oi) == OSPF_IF_ACTIVE) |
| { |
| char timebuf[OSPF_TIME_DUMP_SIZE]; |
| vty_out (vty, " Hello due in %s%s", |
| ospf_timer_dump (oi->t_hello, timebuf, sizeof(timebuf)), |
| VTY_NEWLINE); |
| } |
| else /* passive-interface is set */ |
| vty_out (vty, " No Hellos (Passive interface)%s", VTY_NEWLINE); |
| |
| vty_out (vty, " Neighbor Count is %d, Adjacent neighbor count is %d%s", |
| ospf_nbr_count (oi, 0), ospf_nbr_count (oi, NSM_Full), |
| VTY_NEWLINE); |
| } |
| } |
| |
| DEFUN (show_ip_ospf_interface, |
| show_ip_ospf_interface_cmd, |
| "show ip ospf interface [INTERFACE]", |
| SHOW_STR |
| IP_STR |
| "OSPF information\n" |
| "Interface information\n" |
| "Interface name\n") |
| { |
| struct interface *ifp; |
| struct ospf *ospf; |
| struct listnode *node; |
| |
| ospf = ospf_lookup (); |
| if (ospf == NULL) |
| { |
| vty_out (vty, "OSPF Routing Process not enabled%s", VTY_NEWLINE); |
| return CMD_SUCCESS; |
| } |
| |
| /* Show All Interfaces. */ |
| if (argc == 0) |
| for (ALL_LIST_ELEMENTS_RO (iflist, node, ifp)) |
| show_ip_ospf_interface_sub (vty, ospf, ifp); |
| /* Interface name is specified. */ |
| else |
| { |
| if ((ifp = if_lookup_by_name (argv[0])) == NULL) |
| vty_out (vty, "No such interface name%s", VTY_NEWLINE); |
| else |
| show_ip_ospf_interface_sub (vty, ospf, ifp); |
| } |
| |
| return CMD_SUCCESS; |
| } |
| |
| static void |
| show_ip_ospf_neighbour_header (struct vty *vty) |
| { |
| vty_out (vty, "%s%15s %3s %-15s %9s %-15s %-20s %5s %5s %5s%s", |
| VTY_NEWLINE, |
| "Neighbor ID", "Pri", "State", "Dead Time", |
| "Address", "Interface", "RXmtL", "RqstL", "DBsmL", |
| VTY_NEWLINE); |
| } |
| |
| static void |
| show_ip_ospf_neighbor_sub (struct vty *vty, struct ospf_interface *oi) |
| { |
| struct route_node *rn; |
| struct ospf_neighbor *nbr; |
| char msgbuf[16]; |
| char timebuf[OSPF_TIME_DUMP_SIZE]; |
| |
| for (rn = route_top (oi->nbrs); rn; rn = route_next (rn)) |
| if ((nbr = rn->info)) |
| /* Do not show myself. */ |
| if (nbr != oi->nbr_self) |
| /* Down state is not shown. */ |
| if (nbr->state != NSM_Down) |
| { |
| ospf_nbr_state_message (nbr, msgbuf, 16); |
| |
| if (nbr->state == NSM_Attempt && nbr->router_id.s_addr == 0) |
| vty_out (vty, "%-15s %3d %-15s ", |
| "-", nbr->priority, |
| msgbuf); |
| else |
| vty_out (vty, "%-15s %3d %-15s ", |
| inet_ntoa (nbr->router_id), nbr->priority, |
| msgbuf); |
| |
| vty_out (vty, "%9s ", |
| ospf_timer_dump (nbr->t_inactivity, timebuf, |
| sizeof(timebuf))); |
| |
| vty_out (vty, "%-15s ", inet_ntoa (nbr->src)); |
| vty_out (vty, "%-20s %5ld %5ld %5d%s", |
| IF_NAME (oi), ospf_ls_retransmit_count (nbr), |
| ospf_ls_request_count (nbr), ospf_db_summary_count (nbr), |
| VTY_NEWLINE); |
| } |
| } |
| |
| DEFUN (show_ip_ospf_neighbor, |
| show_ip_ospf_neighbor_cmd, |
| "show ip ospf neighbor", |
| SHOW_STR |
| IP_STR |
| "OSPF information\n" |
| "Neighbor list\n") |
| { |
| struct ospf *ospf; |
| struct ospf_interface *oi; |
| struct listnode *node; |
| |
| ospf = ospf_lookup (); |
| if (ospf == NULL) |
| { |
| vty_out (vty, " OSPF Routing Process not enabled%s", VTY_NEWLINE); |
| return CMD_SUCCESS; |
| } |
| |
| show_ip_ospf_neighbour_header (vty); |
| |
| for (ALL_LIST_ELEMENTS_RO (ospf->oiflist, node, oi)) |
| show_ip_ospf_neighbor_sub (vty, oi); |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (show_ip_ospf_neighbor_all, |
| show_ip_ospf_neighbor_all_cmd, |
| "show ip ospf neighbor all", |
| SHOW_STR |
| IP_STR |
| "OSPF information\n" |
| "Neighbor list\n" |
| "include down status neighbor\n") |
| { |
| struct ospf *ospf = ospf_lookup (); |
| struct listnode *node; |
| struct ospf_interface *oi; |
| |
| if (ospf == NULL) |
| { |
| vty_out (vty, " OSPF Routing Process not enabled%s", VTY_NEWLINE); |
| return CMD_SUCCESS; |
| } |
| |
| show_ip_ospf_neighbour_header (vty); |
| |
| for (ALL_LIST_ELEMENTS_RO (ospf->oiflist, node, oi)) |
| { |
| struct listnode *nbr_node; |
| struct ospf_nbr_nbma *nbr_nbma; |
| |
| show_ip_ospf_neighbor_sub (vty, oi); |
| |
| /* print Down neighbor status */ |
| for (ALL_LIST_ELEMENTS_RO (oi->nbr_nbma, nbr_node, nbr_nbma)) |
| { |
| if (nbr_nbma->nbr == NULL |
| || nbr_nbma->nbr->state == NSM_Down) |
| { |
| vty_out (vty, "%-15s %3d %-15s %9s ", |
| "-", nbr_nbma->priority, "Down", "-"); |
| vty_out (vty, "%-15s %-20s %5d %5d %5d%s", |
| inet_ntoa (nbr_nbma->addr), IF_NAME (oi), |
| 0, 0, 0, VTY_NEWLINE); |
| } |
| } |
| } |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (show_ip_ospf_neighbor_int, |
| show_ip_ospf_neighbor_int_cmd, |
| "show ip ospf neighbor IFNAME", |
| SHOW_STR |
| IP_STR |
| "OSPF information\n" |
| "Neighbor list\n" |
| "Interface name\n") |
| { |
| struct ospf *ospf; |
| struct interface *ifp; |
| struct route_node *rn; |
| |
| ifp = if_lookup_by_name (argv[0]); |
| if (!ifp) |
| { |
| vty_out (vty, "No such interface.%s", VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| ospf = ospf_lookup (); |
| if (ospf == NULL) |
| { |
| vty_out (vty, " OSPF Routing Process not enabled%s", VTY_NEWLINE); |
| return CMD_SUCCESS; |
| } |
| |
| show_ip_ospf_neighbour_header (vty); |
| |
| for (rn = route_top (IF_OIFS (ifp)); rn; rn = route_next (rn)) |
| { |
| struct ospf_interface *oi = rn->info; |
| |
| if (oi == NULL) |
| continue; |
| |
| show_ip_ospf_neighbor_sub (vty, oi); |
| } |
| |
| return CMD_SUCCESS; |
| } |
| |
| static void |
| show_ip_ospf_nbr_nbma_detail_sub (struct vty *vty, struct ospf_interface *oi, |
| struct ospf_nbr_nbma *nbr_nbma) |
| { |
| char timebuf[OSPF_TIME_DUMP_SIZE]; |
| |
| /* Show neighbor ID. */ |
| vty_out (vty, " Neighbor %s,", "-"); |
| |
| /* Show interface address. */ |
| vty_out (vty, " interface address %s%s", |
| inet_ntoa (nbr_nbma->addr), VTY_NEWLINE); |
| /* Show Area ID. */ |
| vty_out (vty, " In the area %s via interface %s%s", |
| ospf_area_desc_string (oi->area), IF_NAME (oi), VTY_NEWLINE); |
| /* Show neighbor priority and state. */ |
| vty_out (vty, " Neighbor priority is %d, State is %s,", |
| nbr_nbma->priority, "Down"); |
| /* Show state changes. */ |
| vty_out (vty, " %d state changes%s", nbr_nbma->state_change, VTY_NEWLINE); |
| |
| /* Show PollInterval */ |
| vty_out (vty, " Poll interval %d%s", nbr_nbma->v_poll, VTY_NEWLINE); |
| |
| /* Show poll-interval timer. */ |
| vty_out (vty, " Poll timer due in %s%s", |
| ospf_timer_dump (nbr_nbma->t_poll, timebuf, sizeof(timebuf)), |
| VTY_NEWLINE); |
| |
| /* Show poll-interval timer thread. */ |
| vty_out (vty, " Thread Poll Timer %s%s", |
| nbr_nbma->t_poll != NULL ? "on" : "off", VTY_NEWLINE); |
| } |
| |
| static void |
| show_ip_ospf_neighbor_detail_sub (struct vty *vty, struct ospf_interface *oi, |
| struct ospf_neighbor *nbr) |
| { |
| char timebuf[OSPF_TIME_DUMP_SIZE]; |
| |
| /* Show neighbor ID. */ |
| if (nbr->state == NSM_Attempt && nbr->router_id.s_addr == 0) |
| vty_out (vty, " Neighbor %s,", "-"); |
| else |
| vty_out (vty, " Neighbor %s,", inet_ntoa (nbr->router_id)); |
| |
| /* Show interface address. */ |
| vty_out (vty, " interface address %s%s", |
| inet_ntoa (nbr->address.u.prefix4), VTY_NEWLINE); |
| /* Show Area ID. */ |
| vty_out (vty, " In the area %s via interface %s%s", |
| ospf_area_desc_string (oi->area), oi->ifp->name, VTY_NEWLINE); |
| /* Show neighbor priority and state. */ |
| vty_out (vty, " Neighbor priority is %d, State is %s,", |
| nbr->priority, LOOKUP (ospf_nsm_state_msg, nbr->state)); |
| /* Show state changes. */ |
| vty_out (vty, " %d state changes%s", nbr->state_change, VTY_NEWLINE); |
| if (nbr->ts_last_progress.tv_sec || nbr->ts_last_progress.tv_usec) |
| { |
| struct timeval res |
| = tv_sub (recent_relative_time (), nbr->ts_last_progress); |
| vty_out (vty, " Most recent state change statistics:%s", |
| VTY_NEWLINE); |
| vty_out (vty, " Progressive change %s ago%s", |
| ospf_timeval_dump (&res, timebuf, sizeof(timebuf)), |
| VTY_NEWLINE); |
| } |
| if (nbr->ts_last_regress.tv_sec || nbr->ts_last_regress.tv_usec) |
| { |
| struct timeval res |
| = tv_sub (recent_relative_time (), nbr->ts_last_regress); |
| vty_out (vty, " Regressive change %s ago, due to %s%s", |
| ospf_timeval_dump (&res, timebuf, sizeof(timebuf)), |
| (nbr->last_regress_str ? nbr->last_regress_str : "??"), |
| VTY_NEWLINE); |
| } |
| /* Show Designated Rotuer ID. */ |
| vty_out (vty, " DR is %s,", inet_ntoa (nbr->d_router)); |
| /* Show Backup Designated Rotuer ID. */ |
| vty_out (vty, " BDR is %s%s", inet_ntoa (nbr->bd_router), VTY_NEWLINE); |
| /* Show options. */ |
| vty_out (vty, " Options %d %s%s", nbr->options, |
| ospf_options_dump (nbr->options), VTY_NEWLINE); |
| /* Show Router Dead interval timer. */ |
| vty_out (vty, " Dead timer due in %s%s", |
| ospf_timer_dump (nbr->t_inactivity, timebuf, sizeof (timebuf)), |
| VTY_NEWLINE); |
| /* Show Database Summary list. */ |
| vty_out (vty, " Database Summary List %d%s", |
| ospf_db_summary_count (nbr), VTY_NEWLINE); |
| /* Show Link State Request list. */ |
| vty_out (vty, " Link State Request List %ld%s", |
| ospf_ls_request_count (nbr), VTY_NEWLINE); |
| /* Show Link State Retransmission list. */ |
| vty_out (vty, " Link State Retransmission List %ld%s", |
| ospf_ls_retransmit_count (nbr), VTY_NEWLINE); |
| /* Show inactivity timer thread. */ |
| vty_out (vty, " Thread Inactivity Timer %s%s", |
| nbr->t_inactivity != NULL ? "on" : "off", VTY_NEWLINE); |
| /* Show Database Description retransmission thread. */ |
| vty_out (vty, " Thread Database Description Retransmision %s%s", |
| nbr->t_db_desc != NULL ? "on" : "off", VTY_NEWLINE); |
| /* Show Link State Request Retransmission thread. */ |
| vty_out (vty, " Thread Link State Request Retransmission %s%s", |
| nbr->t_ls_req != NULL ? "on" : "off", VTY_NEWLINE); |
| /* Show Link State Update Retransmission thread. */ |
| vty_out (vty, " Thread Link State Update Retransmission %s%s%s", |
| nbr->t_ls_upd != NULL ? "on" : "off", VTY_NEWLINE, VTY_NEWLINE); |
| } |
| |
| DEFUN (show_ip_ospf_neighbor_id, |
| show_ip_ospf_neighbor_id_cmd, |
| "show ip ospf neighbor A.B.C.D", |
| SHOW_STR |
| IP_STR |
| "OSPF information\n" |
| "Neighbor list\n" |
| "Neighbor ID\n") |
| { |
| struct ospf *ospf; |
| struct listnode *node; |
| struct ospf_neighbor *nbr; |
| struct ospf_interface *oi; |
| struct in_addr router_id; |
| int ret; |
| |
| ret = inet_aton (argv[0], &router_id); |
| if (!ret) |
| { |
| vty_out (vty, "Please specify Neighbor ID by A.B.C.D%s", VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| ospf = ospf_lookup (); |
| if (ospf == NULL) |
| { |
| vty_out (vty, " OSPF Routing Process not enabled%s", VTY_NEWLINE); |
| return CMD_SUCCESS; |
| } |
| |
| for (ALL_LIST_ELEMENTS_RO (ospf->oiflist, node, oi)) |
| if ((nbr = ospf_nbr_lookup_by_routerid (oi->nbrs, &router_id))) |
| show_ip_ospf_neighbor_detail_sub (vty, oi, nbr); |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (show_ip_ospf_neighbor_detail, |
| show_ip_ospf_neighbor_detail_cmd, |
| "show ip ospf neighbor detail", |
| SHOW_STR |
| IP_STR |
| "OSPF information\n" |
| "Neighbor list\n" |
| "detail of all neighbors\n") |
| { |
| struct ospf *ospf; |
| struct ospf_interface *oi; |
| struct listnode *node; |
| |
| ospf = ospf_lookup (); |
| if (ospf == NULL) |
| { |
| vty_out (vty, " OSPF Routing Process not enabled%s", VTY_NEWLINE); |
| return CMD_SUCCESS; |
| } |
| |
| for (ALL_LIST_ELEMENTS_RO (ospf->oiflist, node, oi)) |
| { |
| struct route_node *rn; |
| struct ospf_neighbor *nbr; |
| |
| for (rn = route_top (oi->nbrs); rn; rn = route_next (rn)) |
| if ((nbr = rn->info)) |
| if (nbr != oi->nbr_self) |
| if (nbr->state != NSM_Down) |
| show_ip_ospf_neighbor_detail_sub (vty, oi, nbr); |
| } |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (show_ip_ospf_neighbor_detail_all, |
| show_ip_ospf_neighbor_detail_all_cmd, |
| "show ip ospf neighbor detail all", |
| SHOW_STR |
| IP_STR |
| "OSPF information\n" |
| "Neighbor list\n" |
| "detail of all neighbors\n" |
| "include down status neighbor\n") |
| { |
| struct ospf *ospf; |
| struct listnode *node; |
| struct ospf_interface *oi; |
| |
| ospf = ospf_lookup (); |
| if (ospf == NULL) |
| { |
| vty_out (vty, " OSPF Routing Process not enabled%s", VTY_NEWLINE); |
| return CMD_SUCCESS; |
| } |
| |
| for (ALL_LIST_ELEMENTS_RO (ospf->oiflist, node, oi)) |
| { |
| struct route_node *rn; |
| struct ospf_neighbor *nbr; |
| struct ospf_nbr_nbma *nbr_nbma; |
| |
| for (rn = route_top (oi->nbrs); rn; rn = route_next (rn)) |
| if ((nbr = rn->info)) |
| if (nbr != oi->nbr_self) |
| if (oi->type == OSPF_IFTYPE_NBMA && nbr->state != NSM_Down) |
| show_ip_ospf_neighbor_detail_sub (vty, oi, rn->info); |
| |
| if (oi->type == OSPF_IFTYPE_NBMA) |
| { |
| struct listnode *nd; |
| |
| for (ALL_LIST_ELEMENTS_RO (oi->nbr_nbma, nd, nbr_nbma)) |
| if (nbr_nbma->nbr == NULL |
| || nbr_nbma->nbr->state == NSM_Down) |
| show_ip_ospf_nbr_nbma_detail_sub (vty, oi, nbr_nbma); |
| } |
| } |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (show_ip_ospf_neighbor_int_detail, |
| show_ip_ospf_neighbor_int_detail_cmd, |
| "show ip ospf neighbor IFNAME detail", |
| SHOW_STR |
| IP_STR |
| "OSPF information\n" |
| "Neighbor list\n" |
| "Interface name\n" |
| "detail of all neighbors") |
| { |
| struct ospf *ospf; |
| struct ospf_interface *oi; |
| struct interface *ifp; |
| struct route_node *rn, *nrn; |
| struct ospf_neighbor *nbr; |
| |
| ifp = if_lookup_by_name (argv[0]); |
| if (!ifp) |
| { |
| vty_out (vty, "No such interface.%s", VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| ospf = ospf_lookup (); |
| if (ospf == NULL) |
| { |
| vty_out (vty, " OSPF Routing Process not enabled%s", VTY_NEWLINE); |
| return CMD_SUCCESS; |
| } |
| |
| |
| for (rn = route_top (IF_OIFS (ifp)); rn; rn = route_next (rn)) |
| if ((oi = rn->info)) |
| for (nrn = route_top (oi->nbrs); nrn; nrn = route_next (nrn)) |
| if ((nbr = nrn->info)) |
| if (nbr != oi->nbr_self) |
| if (nbr->state != NSM_Down) |
| show_ip_ospf_neighbor_detail_sub (vty, oi, nbr); |
| |
| return CMD_SUCCESS; |
| } |
| |
| |
| /* Show functions */ |
| static int |
| show_lsa_summary (struct vty *vty, struct ospf_lsa *lsa, int self) |
| { |
| struct router_lsa *rl; |
| struct summary_lsa *sl; |
| struct as_external_lsa *asel; |
| struct prefix_ipv4 p; |
| |
| if (lsa != NULL) |
| /* If self option is set, check LSA self flag. */ |
| if (self == 0 || IS_LSA_SELF (lsa)) |
| { |
| /* LSA common part show. */ |
| vty_out (vty, "%-15s ", inet_ntoa (lsa->data->id)); |
| vty_out (vty, "%-15s %4d 0x%08lx 0x%04x", |
| inet_ntoa (lsa->data->adv_router), LS_AGE (lsa), |
| (u_long)ntohl (lsa->data->ls_seqnum), ntohs (lsa->data->checksum)); |
| /* LSA specific part show. */ |
| switch (lsa->data->type) |
| { |
| case OSPF_ROUTER_LSA: |
| rl = (struct router_lsa *) lsa->data; |
| vty_out (vty, " %-d", ntohs (rl->links)); |
| break; |
| case OSPF_SUMMARY_LSA: |
| sl = (struct summary_lsa *) lsa->data; |
| |
| p.family = AF_INET; |
| p.prefix = sl->header.id; |
| p.prefixlen = ip_masklen (sl->mask); |
| apply_mask_ipv4 (&p); |
| |
| vty_out (vty, " %s/%d", inet_ntoa (p.prefix), p.prefixlen); |
| break; |
| case OSPF_AS_EXTERNAL_LSA: |
| case OSPF_AS_NSSA_LSA: |
| asel = (struct as_external_lsa *) lsa->data; |
| |
| p.family = AF_INET; |
| p.prefix = asel->header.id; |
| p.prefixlen = ip_masklen (asel->mask); |
| apply_mask_ipv4 (&p); |
| |
| vty_out (vty, " %s %s/%d [0x%lx]", |
| IS_EXTERNAL_METRIC (asel->e[0].tos) ? "E2" : "E1", |
| inet_ntoa (p.prefix), p.prefixlen, |
| (u_long)ntohl (asel->e[0].route_tag)); |
| break; |
| case OSPF_NETWORK_LSA: |
| case OSPF_ASBR_SUMMARY_LSA: |
| #ifdef HAVE_OPAQUE_LSA |
| case OSPF_OPAQUE_LINK_LSA: |
| case OSPF_OPAQUE_AREA_LSA: |
| case OSPF_OPAQUE_AS_LSA: |
| #endif /* HAVE_OPAQUE_LSA */ |
| default: |
| break; |
| } |
| vty_out (vty, VTY_NEWLINE); |
| } |
| |
| return 0; |
| } |
| |
| static const char *show_database_desc[] = |
| { |
| "unknown", |
| "Router Link States", |
| "Net Link States", |
| "Summary Link States", |
| "ASBR-Summary Link States", |
| "AS External Link States", |
| "Group Membership LSA", |
| "NSSA-external Link States", |
| #ifdef HAVE_OPAQUE_LSA |
| "Type-8 LSA", |
| "Link-Local Opaque-LSA", |
| "Area-Local Opaque-LSA", |
| "AS-external Opaque-LSA", |
| #endif /* HAVE_OPAQUE_LSA */ |
| }; |
| |
| static const char *show_database_header[] = |
| { |
| "", |
| "Link ID ADV Router Age Seq# CkSum Link count", |
| "Link ID ADV Router Age Seq# CkSum", |
| "Link ID ADV Router Age Seq# CkSum Route", |
| "Link ID ADV Router Age Seq# CkSum", |
| "Link ID ADV Router Age Seq# CkSum Route", |
| " --- header for Group Member ----", |
| "Link ID ADV Router Age Seq# CkSum Route", |
| #ifdef HAVE_OPAQUE_LSA |
| " --- type-8 ---", |
| "Opaque-Type/Id ADV Router Age Seq# CkSum", |
| "Opaque-Type/Id ADV Router Age Seq# CkSum", |
| "Opaque-Type/Id ADV Router Age Seq# CkSum", |
| #endif /* HAVE_OPAQUE_LSA */ |
| }; |
| |
| static void |
| show_ip_ospf_database_header (struct vty *vty, struct ospf_lsa *lsa) |
| { |
| struct router_lsa *rlsa = (struct router_lsa*) lsa->data; |
| |
| vty_out (vty, " LS age: %d%s", LS_AGE (lsa), VTY_NEWLINE); |
| vty_out (vty, " Options: 0x%-2x : %s%s", |
| lsa->data->options, |
| ospf_options_dump(lsa->data->options), |
| VTY_NEWLINE); |
| vty_out (vty, " LS Flags: 0x%-2x %s%s", |
| lsa->flags, |
| ((lsa->flags & OSPF_LSA_LOCAL_XLT) ? "(Translated from Type-7)" : ""), |
| VTY_NEWLINE); |
| |
| if (lsa->data->type == OSPF_ROUTER_LSA) |
| { |
| vty_out (vty, " Flags: 0x%x" , rlsa->flags); |
| |
| if (rlsa->flags) |
| vty_out (vty, " :%s%s%s%s", |
| IS_ROUTER_LSA_BORDER (rlsa) ? " ABR" : "", |
| IS_ROUTER_LSA_EXTERNAL (rlsa) ? " ASBR" : "", |
| IS_ROUTER_LSA_VIRTUAL (rlsa) ? " VL-endpoint" : "", |
| IS_ROUTER_LSA_SHORTCUT (rlsa) ? " Shortcut" : ""); |
| |
| vty_out (vty, "%s", VTY_NEWLINE); |
| } |
| vty_out (vty, " LS Type: %s%s", |
| LOOKUP (ospf_lsa_type_msg, lsa->data->type), VTY_NEWLINE); |
| vty_out (vty, " Link State ID: %s %s%s", inet_ntoa (lsa->data->id), |
| LOOKUP (ospf_link_state_id_type_msg, lsa->data->type), VTY_NEWLINE); |
| vty_out (vty, " Advertising Router: %s%s", |
| inet_ntoa (lsa->data->adv_router), VTY_NEWLINE); |
| vty_out (vty, " LS Seq Number: %08lx%s", (u_long)ntohl (lsa->data->ls_seqnum), |
| VTY_NEWLINE); |
| vty_out (vty, " Checksum: 0x%04x%s", ntohs (lsa->data->checksum), |
| VTY_NEWLINE); |
| vty_out (vty, " Length: %d%s", ntohs (lsa->data->length), VTY_NEWLINE); |
| } |
| |
| const char *link_type_desc[] = |
| { |
| "(null)", |
| "another Router (point-to-point)", |
| "a Transit Network", |
| "Stub Network", |
| "a Virtual Link", |
| }; |
| |
| const char *link_id_desc[] = |
| { |
| "(null)", |
| "Neighboring Router ID", |
| "Designated Router address", |
| "Net", |
| "Neighboring Router ID", |
| }; |
| |
| const char *link_data_desc[] = |
| { |
| "(null)", |
| "Router Interface address", |
| "Router Interface address", |
| "Network Mask", |
| "Router Interface address", |
| }; |
| |
| /* Show router-LSA each Link information. */ |
| static void |
| show_ip_ospf_database_router_links (struct vty *vty, |
| struct router_lsa *rl) |
| { |
| int len, i, type; |
| |
| len = ntohs (rl->header.length) - 4; |
| for (i = 0; i < ntohs (rl->links) && len > 0; len -= 12, i++) |
| { |
| type = rl->link[i].type; |
| |
| vty_out (vty, " Link connected to: %s%s", |
| link_type_desc[type], VTY_NEWLINE); |
| vty_out (vty, " (Link ID) %s: %s%s", link_id_desc[type], |
| inet_ntoa (rl->link[i].link_id), VTY_NEWLINE); |
| vty_out (vty, " (Link Data) %s: %s%s", link_data_desc[type], |
| inet_ntoa (rl->link[i].link_data), VTY_NEWLINE); |
| vty_out (vty, " Number of TOS metrics: 0%s", VTY_NEWLINE); |
| vty_out (vty, " TOS 0 Metric: %d%s", |
| ntohs (rl->link[i].metric), VTY_NEWLINE); |
| vty_out (vty, "%s", VTY_NEWLINE); |
| } |
| } |
| |
| /* Show router-LSA detail information. */ |
| static int |
| show_router_lsa_detail (struct vty *vty, struct ospf_lsa *lsa) |
| { |
| if (lsa != NULL) |
| { |
| struct router_lsa *rl = (struct router_lsa *) lsa->data; |
| |
| show_ip_ospf_database_header (vty, lsa); |
| |
| vty_out (vty, " Number of Links: %d%s%s", ntohs (rl->links), |
| VTY_NEWLINE, VTY_NEWLINE); |
| |
| show_ip_ospf_database_router_links (vty, rl); |
| vty_out (vty, "%s", VTY_NEWLINE); |
| } |
| |
| return 0; |
| } |
| |
| /* Show network-LSA detail information. */ |
| static int |
| show_network_lsa_detail (struct vty *vty, struct ospf_lsa *lsa) |
| { |
| int length, i; |
| |
| if (lsa != NULL) |
| { |
| struct network_lsa *nl = (struct network_lsa *) lsa->data; |
| |
| show_ip_ospf_database_header (vty, lsa); |
| |
| vty_out (vty, " Network Mask: /%d%s", |
| ip_masklen (nl->mask), VTY_NEWLINE); |
| |
| length = ntohs (lsa->data->length) - OSPF_LSA_HEADER_SIZE - 4; |
| |
| for (i = 0; length > 0; i++, length -= 4) |
| vty_out (vty, " Attached Router: %s%s", |
| inet_ntoa (nl->routers[i]), VTY_NEWLINE); |
| |
| vty_out (vty, "%s", VTY_NEWLINE); |
| } |
| |
| return 0; |
| } |
| |
| /* Show summary-LSA detail information. */ |
| static int |
| show_summary_lsa_detail (struct vty *vty, struct ospf_lsa *lsa) |
| { |
| if (lsa != NULL) |
| { |
| struct summary_lsa *sl = (struct summary_lsa *) lsa->data; |
| |
| show_ip_ospf_database_header (vty, lsa); |
| |
| vty_out (vty, " Network Mask: /%d%s", ip_masklen (sl->mask), |
| VTY_NEWLINE); |
| vty_out (vty, " TOS: 0 Metric: %d%s", GET_METRIC (sl->metric), |
| VTY_NEWLINE); |
| vty_out (vty, "%s", VTY_NEWLINE); |
| } |
| |
| return 0; |
| } |
| |
| /* Show summary-ASBR-LSA detail information. */ |
| static int |
| show_summary_asbr_lsa_detail (struct vty *vty, struct ospf_lsa *lsa) |
| { |
| if (lsa != NULL) |
| { |
| struct summary_lsa *sl = (struct summary_lsa *) lsa->data; |
| |
| show_ip_ospf_database_header (vty, lsa); |
| |
| vty_out (vty, " Network Mask: /%d%s", |
| ip_masklen (sl->mask), VTY_NEWLINE); |
| vty_out (vty, " TOS: 0 Metric: %d%s", GET_METRIC (sl->metric), |
| VTY_NEWLINE); |
| vty_out (vty, "%s", VTY_NEWLINE); |
| } |
| |
| return 0; |
| } |
| |
| /* Show AS-external-LSA detail information. */ |
| static int |
| show_as_external_lsa_detail (struct vty *vty, struct ospf_lsa *lsa) |
| { |
| if (lsa != NULL) |
| { |
| struct as_external_lsa *al = (struct as_external_lsa *) lsa->data; |
| |
| show_ip_ospf_database_header (vty, lsa); |
| |
| vty_out (vty, " Network Mask: /%d%s", |
| ip_masklen (al->mask), VTY_NEWLINE); |
| vty_out (vty, " Metric Type: %s%s", |
| IS_EXTERNAL_METRIC (al->e[0].tos) ? |
| "2 (Larger than any link state path)" : "1", VTY_NEWLINE); |
| vty_out (vty, " TOS: 0%s", VTY_NEWLINE); |
| vty_out (vty, " Metric: %d%s", |
| GET_METRIC (al->e[0].metric), VTY_NEWLINE); |
| vty_out (vty, " Forward Address: %s%s", |
| inet_ntoa (al->e[0].fwd_addr), VTY_NEWLINE); |
| |
| vty_out (vty, " External Route Tag: %lu%s%s", |
| (u_long)ntohl (al->e[0].route_tag), VTY_NEWLINE, VTY_NEWLINE); |
| } |
| |
| return 0; |
| } |
| |
| #if 0 |
| static int |
| show_as_external_lsa_stdvty (struct ospf_lsa *lsa) |
| { |
| struct as_external_lsa *al = (struct as_external_lsa *) lsa->data; |
| |
| /* show_ip_ospf_database_header (vty, lsa); */ |
| |
| zlog_debug( " Network Mask: /%d%s", |
| ip_masklen (al->mask), "\n"); |
| zlog_debug( " Metric Type: %s%s", |
| IS_EXTERNAL_METRIC (al->e[0].tos) ? |
| "2 (Larger than any link state path)" : "1", "\n"); |
| zlog_debug( " TOS: 0%s", "\n"); |
| zlog_debug( " Metric: %d%s", |
| GET_METRIC (al->e[0].metric), "\n"); |
| zlog_debug( " Forward Address: %s%s", |
| inet_ntoa (al->e[0].fwd_addr), "\n"); |
| |
| zlog_debug( " External Route Tag: %u%s%s", |
| ntohl (al->e[0].route_tag), "\n", "\n"); |
| |
| return 0; |
| } |
| #endif |
| |
| /* Show AS-NSSA-LSA detail information. */ |
| static int |
| show_as_nssa_lsa_detail (struct vty *vty, struct ospf_lsa *lsa) |
| { |
| if (lsa != NULL) |
| { |
| struct as_external_lsa *al = (struct as_external_lsa *) lsa->data; |
| |
| show_ip_ospf_database_header (vty, lsa); |
| |
| vty_out (vty, " Network Mask: /%d%s", |
| ip_masklen (al->mask), VTY_NEWLINE); |
| vty_out (vty, " Metric Type: %s%s", |
| IS_EXTERNAL_METRIC (al->e[0].tos) ? |
| "2 (Larger than any link state path)" : "1", VTY_NEWLINE); |
| vty_out (vty, " TOS: 0%s", VTY_NEWLINE); |
| vty_out (vty, " Metric: %d%s", |
| GET_METRIC (al->e[0].metric), VTY_NEWLINE); |
| vty_out (vty, " NSSA: Forward Address: %s%s", |
| inet_ntoa (al->e[0].fwd_addr), VTY_NEWLINE); |
| |
| vty_out (vty, " External Route Tag: %u%s%s", |
| ntohl (al->e[0].route_tag), VTY_NEWLINE, VTY_NEWLINE); |
| } |
| |
| return 0; |
| } |
| |
| static int |
| show_func_dummy (struct vty *vty, struct ospf_lsa *lsa) |
| { |
| return 0; |
| } |
| |
| #ifdef HAVE_OPAQUE_LSA |
| static int |
| show_opaque_lsa_detail (struct vty *vty, struct ospf_lsa *lsa) |
| { |
| if (lsa != NULL) |
| { |
| show_ip_ospf_database_header (vty, lsa); |
| show_opaque_info_detail (vty, lsa); |
| |
| vty_out (vty, "%s", VTY_NEWLINE); |
| } |
| return 0; |
| } |
| #endif /* HAVE_OPAQUE_LSA */ |
| |
| int (*show_function[])(struct vty *, struct ospf_lsa *) = |
| { |
| NULL, |
| show_router_lsa_detail, |
| show_network_lsa_detail, |
| show_summary_lsa_detail, |
| show_summary_asbr_lsa_detail, |
| show_as_external_lsa_detail, |
| show_func_dummy, |
| show_as_nssa_lsa_detail, /* almost same as external */ |
| #ifdef HAVE_OPAQUE_LSA |
| NULL, /* type-8 */ |
| show_opaque_lsa_detail, |
| show_opaque_lsa_detail, |
| show_opaque_lsa_detail, |
| #endif /* HAVE_OPAQUE_LSA */ |
| }; |
| |
| static void |
| show_lsa_prefix_set (struct vty *vty, struct prefix_ls *lp, struct in_addr *id, |
| struct in_addr *adv_router) |
| { |
| memset (lp, 0, sizeof (struct prefix_ls)); |
| lp->family = 0; |
| if (id == NULL) |
| lp->prefixlen = 0; |
| else if (adv_router == NULL) |
| { |
| lp->prefixlen = 32; |
| lp->id = *id; |
| } |
| else |
| { |
| lp->prefixlen = 64; |
| lp->id = *id; |
| lp->adv_router = *adv_router; |
| } |
| } |
| |
| static void |
| show_lsa_detail_proc (struct vty *vty, struct route_table *rt, |
| struct in_addr *id, struct in_addr *adv_router) |
| { |
| struct prefix_ls lp; |
| struct route_node *rn, *start; |
| struct ospf_lsa *lsa; |
| |
| show_lsa_prefix_set (vty, &lp, id, adv_router); |
| start = route_node_get (rt, (struct prefix *) &lp); |
| if (start) |
| { |
| route_lock_node (start); |
| for (rn = start; rn; rn = route_next_until (rn, start)) |
| if ((lsa = rn->info)) |
| { |
| if (show_function[lsa->data->type] != NULL) |
| show_function[lsa->data->type] (vty, lsa); |
| } |
| route_unlock_node (start); |
| } |
| } |
| |
| /* Show detail LSA information |
| -- if id is NULL then show all LSAs. */ |
| static void |
| show_lsa_detail (struct vty *vty, struct ospf *ospf, int type, |
| struct in_addr *id, struct in_addr *adv_router) |
| { |
| struct listnode *node; |
| struct ospf_area *area; |
| |
| switch (type) |
| { |
| case OSPF_AS_EXTERNAL_LSA: |
| #ifdef HAVE_OPAQUE_LSA |
| case OSPF_OPAQUE_AS_LSA: |
| #endif /* HAVE_OPAQUE_LSA */ |
| vty_out (vty, " %s %s%s", |
| show_database_desc[type], |
| VTY_NEWLINE, VTY_NEWLINE); |
| show_lsa_detail_proc (vty, AS_LSDB (ospf, type), id, adv_router); |
| break; |
| default: |
| for (ALL_LIST_ELEMENTS_RO (ospf->areas, node, area)) |
| { |
| vty_out (vty, "%s %s (Area %s)%s%s", |
| VTY_NEWLINE, show_database_desc[type], |
| ospf_area_desc_string (area), VTY_NEWLINE, VTY_NEWLINE); |
| show_lsa_detail_proc (vty, AREA_LSDB (area, type), id, adv_router); |
| } |
| break; |
| } |
| } |
| |
| static void |
| show_lsa_detail_adv_router_proc (struct vty *vty, struct route_table *rt, |
| struct in_addr *adv_router) |
| { |
| struct route_node *rn; |
| struct ospf_lsa *lsa; |
| |
| for (rn = route_top (rt); rn; rn = route_next (rn)) |
| if ((lsa = rn->info)) |
| if (IPV4_ADDR_SAME (adv_router, &lsa->data->adv_router)) |
| { |
| if (CHECK_FLAG (lsa->flags, OSPF_LSA_LOCAL_XLT)) |
| continue; |
| if (show_function[lsa->data->type] != NULL) |
| show_function[lsa->data->type] (vty, lsa); |
| } |
| } |
| |
| /* Show detail LSA information. */ |
| static void |
| show_lsa_detail_adv_router (struct vty *vty, struct ospf *ospf, int type, |
| struct in_addr *adv_router) |
| { |
| struct listnode *node; |
| struct ospf_area *area; |
| |
| switch (type) |
| { |
| case OSPF_AS_EXTERNAL_LSA: |
| #ifdef HAVE_OPAQUE_LSA |
| case OSPF_OPAQUE_AS_LSA: |
| #endif /* HAVE_OPAQUE_LSA */ |
| vty_out (vty, " %s %s%s", |
| show_database_desc[type], |
| VTY_NEWLINE, VTY_NEWLINE); |
| show_lsa_detail_adv_router_proc (vty, AS_LSDB (ospf, type), |
| adv_router); |
| break; |
| default: |
| for (ALL_LIST_ELEMENTS_RO (ospf->areas, node, area)) |
| { |
| vty_out (vty, "%s %s (Area %s)%s%s", |
| VTY_NEWLINE, show_database_desc[type], |
| ospf_area_desc_string (area), VTY_NEWLINE, VTY_NEWLINE); |
| show_lsa_detail_adv_router_proc (vty, AREA_LSDB (area, type), |
| adv_router); |
| } |
| break; |
| } |
| } |
| |
| static void |
| show_ip_ospf_database_summary (struct vty *vty, struct ospf *ospf, int self) |
| { |
| struct ospf_lsa *lsa; |
| struct route_node *rn; |
| struct ospf_area *area; |
| struct listnode *node; |
| int type; |
| |
| for (ALL_LIST_ELEMENTS_RO (ospf->areas, node, area)) |
| { |
| for (type = OSPF_MIN_LSA; type < OSPF_MAX_LSA; type++) |
| { |
| switch (type) |
| { |
| case OSPF_AS_EXTERNAL_LSA: |
| #ifdef HAVE_OPAQUE_LSA |
| case OSPF_OPAQUE_AS_LSA: |
| #endif /* HAVE_OPAQUE_LSA */ |
| continue; |
| default: |
| break; |
| } |
| if (ospf_lsdb_count_self (area->lsdb, type) > 0 || |
| (!self && ospf_lsdb_count (area->lsdb, type) > 0)) |
| { |
| vty_out (vty, " %s (Area %s)%s%s", |
| show_database_desc[type], |
| ospf_area_desc_string (area), |
| VTY_NEWLINE, VTY_NEWLINE); |
| vty_out (vty, "%s%s", show_database_header[type], VTY_NEWLINE); |
| |
| LSDB_LOOP (AREA_LSDB (area, type), rn, lsa) |
| show_lsa_summary (vty, lsa, self); |
| |
| vty_out (vty, "%s", VTY_NEWLINE); |
| } |
| } |
| } |
| |
| for (type = OSPF_MIN_LSA; type < OSPF_MAX_LSA; type++) |
| { |
| switch (type) |
| { |
| case OSPF_AS_EXTERNAL_LSA: |
| #ifdef HAVE_OPAQUE_LSA |
| case OSPF_OPAQUE_AS_LSA: |
| #endif /* HAVE_OPAQUE_LSA */ |
| break; |
| default: |
| continue; |
| } |
| if (ospf_lsdb_count_self (ospf->lsdb, type) || |
| (!self && ospf_lsdb_count (ospf->lsdb, type))) |
| { |
| vty_out (vty, " %s%s%s", |
| show_database_desc[type], |
| VTY_NEWLINE, VTY_NEWLINE); |
| vty_out (vty, "%s%s", show_database_header[type], |
| VTY_NEWLINE); |
| |
| LSDB_LOOP (AS_LSDB (ospf, type), rn, lsa) |
| show_lsa_summary (vty, lsa, self); |
| |
| vty_out (vty, "%s", VTY_NEWLINE); |
| } |
| } |
| |
| vty_out (vty, "%s", VTY_NEWLINE); |
| } |
| |
| static void |
| show_ip_ospf_database_maxage (struct vty *vty, struct ospf *ospf) |
| { |
| struct route_node *rn; |
| |
| vty_out (vty, "%s MaxAge Link States:%s%s", |
| VTY_NEWLINE, VTY_NEWLINE, VTY_NEWLINE); |
| |
| for (rn = route_top (ospf->maxage_lsa); rn; rn = route_next (rn)) |
| { |
| struct ospf_lsa *lsa; |
| |
| if ((lsa = rn->info) != NULL) |
| { |
| vty_out (vty, "Link type: %d%s", lsa->data->type, VTY_NEWLINE); |
| vty_out (vty, "Link State ID: %s%s", |
| inet_ntoa (lsa->data->id), VTY_NEWLINE); |
| vty_out (vty, "Advertising Router: %s%s", |
| inet_ntoa (lsa->data->adv_router), VTY_NEWLINE); |
| vty_out (vty, "LSA lock count: %d%s", lsa->lock, VTY_NEWLINE); |
| vty_out (vty, "%s", VTY_NEWLINE); |
| } |
| } |
| } |
| |
| #define OSPF_LSA_TYPE_NSSA_DESC "NSSA external link state\n" |
| #define OSPF_LSA_TYPE_NSSA_CMD_STR "|nssa-external" |
| |
| #ifdef HAVE_OPAQUE_LSA |
| #define OSPF_LSA_TYPE_OPAQUE_LINK_DESC "Link local Opaque-LSA\n" |
| #define OSPF_LSA_TYPE_OPAQUE_AREA_DESC "Link area Opaque-LSA\n" |
| #define OSPF_LSA_TYPE_OPAQUE_AS_DESC "Link AS Opaque-LSA\n" |
| #define OSPF_LSA_TYPE_OPAQUE_CMD_STR "|opaque-link|opaque-area|opaque-as" |
| #else /* HAVE_OPAQUE_LSA */ |
| #define OSPF_LSA_TYPE_OPAQUE_LINK_DESC "" |
| #define OSPF_LSA_TYPE_OPAQUE_AREA_DESC "" |
| #define OSPF_LSA_TYPE_OPAQUE_AS_DESC "" |
| #define OSPF_LSA_TYPE_OPAQUE_CMD_STR "" |
| #endif /* HAVE_OPAQUE_LSA */ |
| |
| #define OSPF_LSA_TYPES_CMD_STR \ |
| "asbr-summary|external|network|router|summary" \ |
| OSPF_LSA_TYPE_NSSA_CMD_STR \ |
| OSPF_LSA_TYPE_OPAQUE_CMD_STR |
| |
| #define OSPF_LSA_TYPES_DESC \ |
| "ASBR summary link states\n" \ |
| "External link states\n" \ |
| "Network link states\n" \ |
| "Router link states\n" \ |
| "Network summary link states\n" \ |
| OSPF_LSA_TYPE_NSSA_DESC \ |
| OSPF_LSA_TYPE_OPAQUE_LINK_DESC \ |
| OSPF_LSA_TYPE_OPAQUE_AREA_DESC \ |
| OSPF_LSA_TYPE_OPAQUE_AS_DESC |
| |
| DEFUN (show_ip_ospf_database, |
| show_ip_ospf_database_cmd, |
| "show ip ospf database", |
| SHOW_STR |
| IP_STR |
| "OSPF information\n" |
| "Database summary\n") |
| { |
| struct ospf *ospf; |
| int type, ret; |
| struct in_addr id, adv_router; |
| |
| ospf = ospf_lookup (); |
| if (ospf == NULL) |
| { |
| vty_out (vty, " OSPF Routing Process not enabled%s", VTY_NEWLINE); |
| return CMD_SUCCESS; |
| } |
| |
| vty_out (vty, "%s OSPF Router with ID (%s)%s%s", VTY_NEWLINE, |
| inet_ntoa (ospf->router_id), VTY_NEWLINE, VTY_NEWLINE); |
| |
| /* Show all LSA. */ |
| if (argc == 0) |
| { |
| show_ip_ospf_database_summary (vty, ospf, 0); |
| return CMD_SUCCESS; |
| } |
| |
| /* Set database type to show. */ |
| if (strncmp (argv[0], "r", 1) == 0) |
| type = OSPF_ROUTER_LSA; |
| else if (strncmp (argv[0], "ne", 2) == 0) |
| type = OSPF_NETWORK_LSA; |
| else if (strncmp (argv[0], "ns", 2) == 0) |
| type = OSPF_AS_NSSA_LSA; |
| else if (strncmp (argv[0], "su", 2) == 0) |
| type = OSPF_SUMMARY_LSA; |
| else if (strncmp (argv[0], "a", 1) == 0) |
| type = OSPF_ASBR_SUMMARY_LSA; |
| else if (strncmp (argv[0], "e", 1) == 0) |
| type = OSPF_AS_EXTERNAL_LSA; |
| else if (strncmp (argv[0], "se", 2) == 0) |
| { |
| show_ip_ospf_database_summary (vty, ospf, 1); |
| return CMD_SUCCESS; |
| } |
| else if (strncmp (argv[0], "m", 1) == 0) |
| { |
| show_ip_ospf_database_maxage (vty, ospf); |
| return CMD_SUCCESS; |
| } |
| #ifdef HAVE_OPAQUE_LSA |
| else if (strncmp (argv[0], "opaque-l", 8) == 0) |
| type = OSPF_OPAQUE_LINK_LSA; |
| else if (strncmp (argv[0], "opaque-ar", 9) == 0) |
| type = OSPF_OPAQUE_AREA_LSA; |
| else if (strncmp (argv[0], "opaque-as", 9) == 0) |
| type = OSPF_OPAQUE_AS_LSA; |
| #endif /* HAVE_OPAQUE_LSA */ |
| else |
| return CMD_WARNING; |
| |
| /* `show ip ospf database LSA'. */ |
| if (argc == 1) |
| show_lsa_detail (vty, ospf, type, NULL, NULL); |
| else if (argc >= 2) |
| { |
| ret = inet_aton (argv[1], &id); |
| if (!ret) |
| return CMD_WARNING; |
| |
| /* `show ip ospf database LSA ID'. */ |
| if (argc == 2) |
| show_lsa_detail (vty, ospf, type, &id, NULL); |
| /* `show ip ospf database LSA ID adv-router ADV_ROUTER'. */ |
| else if (argc == 3) |
| { |
| if (strncmp (argv[2], "s", 1) == 0) |
| adv_router = ospf->router_id; |
| else |
| { |
| ret = inet_aton (argv[2], &adv_router); |
| if (!ret) |
| return CMD_WARNING; |
| } |
| show_lsa_detail (vty, ospf, type, &id, &adv_router); |
| } |
| } |
| |
| return CMD_SUCCESS; |
| } |
| |
| ALIAS (show_ip_ospf_database, |
| show_ip_ospf_database_type_cmd, |
| "show ip ospf database (" OSPF_LSA_TYPES_CMD_STR "|max-age|self-originate)", |
| SHOW_STR |
| IP_STR |
| "OSPF information\n" |
| "Database summary\n" |
| OSPF_LSA_TYPES_DESC |
| "LSAs in MaxAge list\n" |
| "Self-originated link states\n") |
| |
| ALIAS (show_ip_ospf_database, |
| show_ip_ospf_database_type_id_cmd, |
| "show ip ospf database (" OSPF_LSA_TYPES_CMD_STR ") A.B.C.D", |
| SHOW_STR |
| IP_STR |
| "OSPF information\n" |
| "Database summary\n" |
| OSPF_LSA_TYPES_DESC |
| "Link State ID (as an IP address)\n") |
| |
| ALIAS (show_ip_ospf_database, |
| show_ip_ospf_database_type_id_adv_router_cmd, |
| "show ip ospf database (" OSPF_LSA_TYPES_CMD_STR ") A.B.C.D adv-router A.B.C.D", |
| SHOW_STR |
| IP_STR |
| "OSPF information\n" |
| "Database summary\n" |
| OSPF_LSA_TYPES_DESC |
| "Link State ID (as an IP address)\n" |
| "Advertising Router link states\n" |
| "Advertising Router (as an IP address)\n") |
| |
| ALIAS (show_ip_ospf_database, |
| show_ip_ospf_database_type_id_self_cmd, |
| "show ip ospf database (" OSPF_LSA_TYPES_CMD_STR ") A.B.C.D (self-originate|)", |
| SHOW_STR |
| IP_STR |
| "OSPF information\n" |
| "Database summary\n" |
| OSPF_LSA_TYPES_DESC |
| "Link State ID (as an IP address)\n" |
| "Self-originated link states\n" |
| "\n") |
| |
| DEFUN (show_ip_ospf_database_type_adv_router, |
| show_ip_ospf_database_type_adv_router_cmd, |
| "show ip ospf database (" OSPF_LSA_TYPES_CMD_STR ") adv-router A.B.C.D", |
| SHOW_STR |
| IP_STR |
| "OSPF information\n" |
| "Database summary\n" |
| OSPF_LSA_TYPES_DESC |
| "Advertising Router link states\n" |
| "Advertising Router (as an IP address)\n") |
| { |
| struct ospf *ospf; |
| int type, ret; |
| struct in_addr adv_router; |
| |
| ospf = ospf_lookup (); |
| if (ospf == NULL) |
| { |
| vty_out (vty, " OSPF Routing Process not enabled%s", VTY_NEWLINE); |
| return CMD_SUCCESS; |
| } |
| |
| vty_out (vty, "%s OSPF Router with ID (%s)%s%s", VTY_NEWLINE, |
| inet_ntoa (ospf->router_id), VTY_NEWLINE, VTY_NEWLINE); |
| |
| if (argc != 2) |
| return CMD_WARNING; |
| |
| /* Set database type to show. */ |
| if (strncmp (argv[0], "r", 1) == 0) |
| type = OSPF_ROUTER_LSA; |
| else if (strncmp (argv[0], "ne", 2) == 0) |
| type = OSPF_NETWORK_LSA; |
| else if (strncmp (argv[0], "ns", 2) == 0) |
| type = OSPF_AS_NSSA_LSA; |
| else if (strncmp (argv[0], "s", 1) == 0) |
| type = OSPF_SUMMARY_LSA; |
| else if (strncmp (argv[0], "a", 1) == 0) |
| type = OSPF_ASBR_SUMMARY_LSA; |
| else if (strncmp (argv[0], "e", 1) == 0) |
| type = OSPF_AS_EXTERNAL_LSA; |
| #ifdef HAVE_OPAQUE_LSA |
| else if (strncmp (argv[0], "opaque-l", 8) == 0) |
| type = OSPF_OPAQUE_LINK_LSA; |
| else if (strncmp (argv[0], "opaque-ar", 9) == 0) |
| type = OSPF_OPAQUE_AREA_LSA; |
| else if (strncmp (argv[0], "opaque-as", 9) == 0) |
| type = OSPF_OPAQUE_AS_LSA; |
| #endif /* HAVE_OPAQUE_LSA */ |
| else |
| return CMD_WARNING; |
| |
| /* `show ip ospf database LSA adv-router ADV_ROUTER'. */ |
| if (strncmp (argv[1], "s", 1) == 0) |
| adv_router = ospf->router_id; |
| else |
| { |
| ret = inet_aton (argv[1], &adv_router); |
| if (!ret) |
| return CMD_WARNING; |
| } |
| |
| show_lsa_detail_adv_router (vty, ospf, type, &adv_router); |
| |
| return CMD_SUCCESS; |
| } |
| |
| ALIAS (show_ip_ospf_database_type_adv_router, |
| show_ip_ospf_database_type_self_cmd, |
| "show ip ospf database (" OSPF_LSA_TYPES_CMD_STR ") (self-originate|)", |
| SHOW_STR |
| IP_STR |
| "OSPF information\n" |
| "Database summary\n" |
| OSPF_LSA_TYPES_DESC |
| "Self-originated link states\n") |
| |
| |
| DEFUN (ip_ospf_authentication_args, |
| ip_ospf_authentication_args_addr_cmd, |
| "ip ospf authentication (null|message-digest) A.B.C.D", |
| "IP Information\n" |
| "OSPF interface commands\n" |
| "Enable authentication on this interface\n" |
| "Use null authentication\n" |
| "Use message-digest authentication\n" |
| "Address of interface") |
| { |
| struct interface *ifp; |
| struct in_addr addr; |
| int ret; |
| struct ospf_if_params *params; |
| |
| ifp = vty->index; |
| params = IF_DEF_PARAMS (ifp); |
| |
| if (argc == 2) |
| { |
| ret = inet_aton(argv[1], &addr); |
| if (!ret) |
| { |
| vty_out (vty, "Please specify interface address by A.B.C.D%s", |
| VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| params = ospf_get_if_params (ifp, addr); |
| ospf_if_update_params (ifp, addr); |
| } |
| |
| /* Handle null authentication */ |
| if ( argv[0][0] == 'n' ) |
| { |
| SET_IF_PARAM (params, auth_type); |
| params->auth_type = OSPF_AUTH_NULL; |
| return CMD_SUCCESS; |
| } |
| |
| /* Handle message-digest authentication */ |
| if ( argv[0][0] == 'm' ) |
| { |
| SET_IF_PARAM (params, auth_type); |
| params->auth_type = OSPF_AUTH_CRYPTOGRAPHIC; |
| return CMD_SUCCESS; |
| } |
| |
| vty_out (vty, "You shouldn't get here!%s", VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| ALIAS (ip_ospf_authentication_args, |
| ip_ospf_authentication_args_cmd, |
| "ip ospf authentication (null|message-digest)", |
| "IP Information\n" |
| "OSPF interface commands\n" |
| "Enable authentication on this interface\n" |
| "Use null authentication\n" |
| "Use message-digest authentication\n") |
| |
| DEFUN (ip_ospf_authentication, |
| ip_ospf_authentication_addr_cmd, |
| "ip ospf authentication A.B.C.D", |
| "IP Information\n" |
| "OSPF interface commands\n" |
| "Enable authentication on this interface\n" |
| "Address of interface") |
| { |
| struct interface *ifp; |
| struct in_addr addr; |
| int ret; |
| struct ospf_if_params *params; |
| |
| ifp = vty->index; |
| params = IF_DEF_PARAMS (ifp); |
| |
| if (argc == 1) |
| { |
| ret = inet_aton(argv[0], &addr); |
| if (!ret) |
| { |
| vty_out (vty, "Please specify interface address by A.B.C.D%s", |
| VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| params = ospf_get_if_params (ifp, addr); |
| ospf_if_update_params (ifp, addr); |
| } |
| |
| SET_IF_PARAM (params, auth_type); |
| params->auth_type = OSPF_AUTH_SIMPLE; |
| |
| return CMD_SUCCESS; |
| } |
| |
| ALIAS (ip_ospf_authentication, |
| ip_ospf_authentication_cmd, |
| "ip ospf authentication", |
| "IP Information\n" |
| "OSPF interface commands\n" |
| "Enable authentication on this interface\n") |
| |
| DEFUN (no_ip_ospf_authentication, |
| no_ip_ospf_authentication_addr_cmd, |
| "no ip ospf authentication A.B.C.D", |
| NO_STR |
| "IP Information\n" |
| "OSPF interface commands\n" |
| "Enable authentication on this interface\n" |
| "Address of interface") |
| { |
| struct interface *ifp; |
| struct in_addr addr; |
| int ret; |
| struct ospf_if_params *params; |
| |
| ifp = vty->index; |
| params = IF_DEF_PARAMS (ifp); |
| |
| if (argc == 1) |
| { |
| ret = inet_aton(argv[0], &addr); |
| if (!ret) |
| { |
| vty_out (vty, "Please specify interface address by A.B.C.D%s", |
| VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| params = ospf_lookup_if_params (ifp, addr); |
| if (params == NULL) |
| return CMD_SUCCESS; |
| } |
| |
| params->auth_type = OSPF_AUTH_NOTSET; |
| UNSET_IF_PARAM (params, auth_type); |
| |
| if (params != IF_DEF_PARAMS (ifp)) |
| { |
| ospf_free_if_params (ifp, addr); |
| ospf_if_update_params (ifp, addr); |
| } |
| |
| return CMD_SUCCESS; |
| } |
| |
| ALIAS (no_ip_ospf_authentication, |
| no_ip_ospf_authentication_cmd, |
| "no ip ospf authentication", |
| NO_STR |
| "IP Information\n" |
| "OSPF interface commands\n" |
| "Enable authentication on this interface\n") |
| |
| DEFUN (ip_ospf_authentication_key, |
| ip_ospf_authentication_key_addr_cmd, |
| "ip ospf authentication-key AUTH_KEY A.B.C.D", |
| "IP Information\n" |
| "OSPF interface commands\n" |
| "Authentication password (key)\n" |
| "The OSPF password (key)\n" |
| "Address of interface") |
| { |
| struct interface *ifp; |
| struct in_addr addr; |
| int ret; |
| struct ospf_if_params *params; |
| |
| ifp = vty->index; |
| params = IF_DEF_PARAMS (ifp); |
| |
| if (argc == 2) |
| { |
| ret = inet_aton(argv[1], &addr); |
| if (!ret) |
| { |
| vty_out (vty, "Please specify interface address by A.B.C.D%s", |
| VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| params = ospf_get_if_params (ifp, addr); |
| ospf_if_update_params (ifp, addr); |
| } |
| |
| |
| memset (params->auth_simple, 0, OSPF_AUTH_SIMPLE_SIZE + 1); |
| strncpy ((char *) params->auth_simple, argv[0], OSPF_AUTH_SIMPLE_SIZE); |
| SET_IF_PARAM (params, auth_simple); |
| |
| return CMD_SUCCESS; |
| } |
| |
| ALIAS (ip_ospf_authentication_key, |
| ip_ospf_authentication_key_cmd, |
| "ip ospf authentication-key AUTH_KEY", |
| "IP Information\n" |
| "OSPF interface commands\n" |
| "Authentication password (key)\n" |
| "The OSPF password (key)") |
| |
| ALIAS (ip_ospf_authentication_key, |
| ospf_authentication_key_cmd, |
| "ospf authentication-key AUTH_KEY", |
| "OSPF interface commands\n" |
| "Authentication password (key)\n" |
| "The OSPF password (key)") |
| |
| DEFUN (no_ip_ospf_authentication_key, |
| no_ip_ospf_authentication_key_addr_cmd, |
| "no ip ospf authentication-key A.B.C.D", |
| NO_STR |
| "IP Information\n" |
| "OSPF interface commands\n" |
| "Authentication password (key)\n" |
| "Address of interface") |
| { |
| struct interface *ifp; |
| struct in_addr addr; |
| int ret; |
| struct ospf_if_params *params; |
| |
| ifp = vty->index; |
| params = IF_DEF_PARAMS (ifp); |
| |
| if (argc == 1) |
| { |
| ret = inet_aton(argv[0], &addr); |
| if (!ret) |
| { |
| vty_out (vty, "Please specify interface address by A.B.C.D%s", |
| VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| params = ospf_lookup_if_params (ifp, addr); |
| if (params == NULL) |
| return CMD_SUCCESS; |
| } |
| |
| memset (params->auth_simple, 0, OSPF_AUTH_SIMPLE_SIZE); |
| UNSET_IF_PARAM (params, auth_simple); |
| |
| if (params != IF_DEF_PARAMS (ifp)) |
| { |
| ospf_free_if_params (ifp, addr); |
| ospf_if_update_params (ifp, addr); |
| } |
| |
| return CMD_SUCCESS; |
| } |
| |
| ALIAS (no_ip_ospf_authentication_key, |
| no_ip_ospf_authentication_key_cmd, |
| "no ip ospf authentication-key", |
| NO_STR |
| "IP Information\n" |
| "OSPF interface commands\n" |
| "Authentication password (key)\n") |
| |
| ALIAS (no_ip_ospf_authentication_key, |
| no_ospf_authentication_key_cmd, |
| "no ospf authentication-key", |
| NO_STR |
| "OSPF interface commands\n" |
| "Authentication password (key)\n") |
| |
| DEFUN (ip_ospf_message_digest_key, |
| ip_ospf_message_digest_key_addr_cmd, |
| "ip ospf message-digest-key <1-255> md5 KEY A.B.C.D", |
| "IP Information\n" |
| "OSPF interface commands\n" |
| "Message digest authentication password (key)\n" |
| "Key ID\n" |
| "Use MD5 algorithm\n" |
| "The OSPF password (key)" |
| "Address of interface") |
| { |
| struct interface *ifp; |
| struct crypt_key *ck; |
| u_char key_id; |
| struct in_addr addr; |
| int ret; |
| struct ospf_if_params *params; |
| |
| ifp = vty->index; |
| params = IF_DEF_PARAMS (ifp); |
| |
| if (argc == 3) |
| { |
| ret = inet_aton(argv[2], &addr); |
| if (!ret) |
| { |
| vty_out (vty, "Please specify interface address by A.B.C.D%s", |
| VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| params = ospf_get_if_params (ifp, addr); |
| ospf_if_update_params (ifp, addr); |
| } |
| |
| key_id = strtol (argv[0], NULL, 10); |
| if (ospf_crypt_key_lookup (params->auth_crypt, key_id) != NULL) |
| { |
| vty_out (vty, "OSPF: Key %d already exists%s", key_id, VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| ck = ospf_crypt_key_new (); |
| ck->key_id = (u_char) key_id; |
| memset (ck->auth_key, 0, OSPF_AUTH_MD5_SIZE+1); |
| strncpy ((char *) ck->auth_key, argv[1], OSPF_AUTH_MD5_SIZE); |
| |
| ospf_crypt_key_add (params->auth_crypt, ck); |
| SET_IF_PARAM (params, auth_crypt); |
| |
| return CMD_SUCCESS; |
| } |
| |
| ALIAS (ip_ospf_message_digest_key, |
| ip_ospf_message_digest_key_cmd, |
| "ip ospf message-digest-key <1-255> md5 KEY", |
| "IP Information\n" |
| "OSPF interface commands\n" |
| "Message digest authentication password (key)\n" |
| "Key ID\n" |
| "Use MD5 algorithm\n" |
| "The OSPF password (key)") |
| |
| ALIAS (ip_ospf_message_digest_key, |
| ospf_message_digest_key_cmd, |
| "ospf message-digest-key <1-255> md5 KEY", |
| "OSPF interface commands\n" |
| "Message digest authentication password (key)\n" |
| "Key ID\n" |
| "Use MD5 algorithm\n" |
| "The OSPF password (key)") |
| |
| DEFUN (no_ip_ospf_message_digest_key, |
| no_ip_ospf_message_digest_key_addr_cmd, |
| "no ip ospf message-digest-key <1-255> A.B.C.D", |
| NO_STR |
| "IP Information\n" |
| "OSPF interface commands\n" |
| "Message digest authentication password (key)\n" |
| "Key ID\n" |
| "Address of interface") |
| { |
| struct interface *ifp; |
| struct crypt_key *ck; |
| int key_id; |
| struct in_addr addr; |
| int ret; |
| struct ospf_if_params *params; |
| |
| ifp = vty->index; |
| params = IF_DEF_PARAMS (ifp); |
| |
| if (argc == 2) |
| { |
| ret = inet_aton(argv[1], &addr); |
| if (!ret) |
| { |
| vty_out (vty, "Please specify interface address by A.B.C.D%s", |
| VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| params = ospf_lookup_if_params (ifp, addr); |
| if (params == NULL) |
| return CMD_SUCCESS; |
| } |
| |
| key_id = strtol (argv[0], NULL, 10); |
| ck = ospf_crypt_key_lookup (params->auth_crypt, key_id); |
| if (ck == NULL) |
| { |
| vty_out (vty, "OSPF: Key %d does not exist%s", key_id, VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| ospf_crypt_key_delete (params->auth_crypt, key_id); |
| |
| if (params != IF_DEF_PARAMS (ifp)) |
| { |
| ospf_free_if_params (ifp, addr); |
| ospf_if_update_params (ifp, addr); |
| } |
| |
| return CMD_SUCCESS; |
| } |
| |
| ALIAS (no_ip_ospf_message_digest_key, |
| no_ip_ospf_message_digest_key_cmd, |
| "no ip ospf message-digest-key <1-255>", |
| NO_STR |
| "IP Information\n" |
| "OSPF interface commands\n" |
| "Message digest authentication password (key)\n" |
| "Key ID\n") |
| |
| ALIAS (no_ip_ospf_message_digest_key, |
| no_ospf_message_digest_key_cmd, |
| "no ospf message-digest-key <1-255>", |
| NO_STR |
| "OSPF interface commands\n" |
| "Message digest authentication password (key)\n" |
| "Key ID\n") |
| |
| DEFUN (ip_ospf_cost, |
| ip_ospf_cost_u32_inet4_cmd, |
| "ip ospf cost <1-65535> A.B.C.D", |
| "IP Information\n" |
| "OSPF interface commands\n" |
| "Interface cost\n" |
| "Cost\n" |
| "Address of interface") |
| { |
| struct interface *ifp = vty->index; |
| u_int32_t cost; |
| struct in_addr addr; |
| int ret; |
| struct ospf_if_params *params; |
| |
| params = IF_DEF_PARAMS (ifp); |
| |
| cost = strtol (argv[0], NULL, 10); |
| |
| /* cost range is <1-65535>. */ |
| if (cost < 1 || cost > 65535) |
| { |
| vty_out (vty, "Interface output cost is invalid%s", VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| if (argc == 2) |
| { |
| ret = inet_aton(argv[1], &addr); |
| if (!ret) |
| { |
| vty_out (vty, "Please specify interface address by A.B.C.D%s", |
| VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| params = ospf_get_if_params (ifp, addr); |
| ospf_if_update_params (ifp, addr); |
| } |
| |
| SET_IF_PARAM (params, output_cost_cmd); |
| params->output_cost_cmd = cost; |
| |
| ospf_if_recalculate_output_cost (ifp); |
| |
| return CMD_SUCCESS; |
| } |
| |
| ALIAS (ip_ospf_cost, |
| ip_ospf_cost_u32_cmd, |
| "ip ospf cost <1-65535>", |
| "IP Information\n" |
| "OSPF interface commands\n" |
| "Interface cost\n" |
| "Cost") |
| |
| ALIAS (ip_ospf_cost, |
| ospf_cost_u32_cmd, |
| "ospf cost <1-65535>", |
| "OSPF interface commands\n" |
| "Interface cost\n" |
| "Cost") |
| |
| ALIAS (ip_ospf_cost, |
| ospf_cost_u32_inet4_cmd, |
| "ospf cost <1-65535> A.B.C.D", |
| "OSPF interface commands\n" |
| "Interface cost\n" |
| "Cost\n" |
| "Address of interface") |
| |
| DEFUN (no_ip_ospf_cost, |
| no_ip_ospf_cost_inet4_cmd, |
| "no ip ospf cost A.B.C.D", |
| NO_STR |
| "IP Information\n" |
| "OSPF interface commands\n" |
| "Interface cost\n" |
| "Address of interface") |
| { |
| struct interface *ifp = vty->index; |
| struct in_addr addr; |
| int ret; |
| struct ospf_if_params *params; |
| |
| ifp = vty->index; |
| params = IF_DEF_PARAMS (ifp); |
| |
| if (argc == 1) |
| { |
| ret = inet_aton(argv[0], &addr); |
| if (!ret) |
| { |
| vty_out (vty, "Please specify interface address by A.B.C.D%s", |
| VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| params = ospf_lookup_if_params (ifp, addr); |
| if (params == NULL) |
| return CMD_SUCCESS; |
| } |
| |
| UNSET_IF_PARAM (params, output_cost_cmd); |
| |
| if (params != IF_DEF_PARAMS (ifp)) |
| { |
| ospf_free_if_params (ifp, addr); |
| ospf_if_update_params (ifp, addr); |
| } |
| |
| ospf_if_recalculate_output_cost (ifp); |
| |
| return CMD_SUCCESS; |
| } |
| |
| ALIAS (no_ip_ospf_cost, |
| no_ip_ospf_cost_cmd, |
| "no ip ospf cost", |
| NO_STR |
| "IP Information\n" |
| "OSPF interface commands\n" |
| "Interface cost\n") |
| |
| ALIAS (no_ip_ospf_cost, |
| no_ospf_cost_cmd, |
| "no ospf cost", |
| NO_STR |
| "OSPF interface commands\n" |
| "Interface cost\n") |
| |
| ALIAS (no_ip_ospf_cost, |
| no_ospf_cost_inet4_cmd, |
| "no ospf cost A.B.C.D", |
| NO_STR |
| "OSPF interface commands\n" |
| "Interface cost\n" |
| "Address of interface") |
| |
| DEFUN (no_ip_ospf_cost2, |
| no_ip_ospf_cost_u32_cmd, |
| "no ip ospf cost <1-65535>", |
| NO_STR |
| "IP Information\n" |
| "OSPF interface commands\n" |
| "Interface cost\n" |
| "Cost") |
| { |
| struct interface *ifp = vty->index; |
| struct in_addr addr; |
| u_int32_t cost; |
| int ret; |
| struct ospf_if_params *params; |
| |
| ifp = vty->index; |
| params = IF_DEF_PARAMS (ifp); |
| |
| /* According to the semantics we are mimicking "no ip ospf cost N" is |
| * always treated as "no ip ospf cost" regardless of the actual value |
| * of N already configured for the interface. Thus the first argument |
| * is always checked to be a number, but is ignored after that. |
| */ |
| cost = strtol (argv[0], NULL, 10); |
| if (cost < 1 || cost > 65535) |
| { |
| vty_out (vty, "Interface output cost is invalid%s", VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| if (argc == 2) |
| { |
| ret = inet_aton(argv[1], &addr); |
| if (!ret) |
| { |
| vty_out (vty, "Please specify interface address by A.B.C.D%s", |
| VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| params = ospf_lookup_if_params (ifp, addr); |
| if (params == NULL) |
| return CMD_SUCCESS; |
| } |
| |
| UNSET_IF_PARAM (params, output_cost_cmd); |
| |
| if (params != IF_DEF_PARAMS (ifp)) |
| { |
| ospf_free_if_params (ifp, addr); |
| ospf_if_update_params (ifp, addr); |
| } |
| |
| ospf_if_recalculate_output_cost (ifp); |
| |
| return CMD_SUCCESS; |
| } |
| |
| ALIAS (no_ip_ospf_cost2, |
| no_ospf_cost_u32_cmd, |
| "no ospf cost <1-65535>", |
| NO_STR |
| "OSPF interface commands\n" |
| "Interface cost\n" |
| "Cost") |
| |
| ALIAS (no_ip_ospf_cost2, |
| no_ip_ospf_cost_u32_inet4_cmd, |
| "no ip ospf cost <1-65535> A.B.C.D", |
| NO_STR |
| "IP Information\n" |
| "OSPF interface commands\n" |
| "Interface cost\n" |
| "Cost\n" |
| "Address of interface") |
| |
| ALIAS (no_ip_ospf_cost2, |
| no_ospf_cost_u32_inet4_cmd, |
| "no ospf cost <1-65535> A.B.C.D", |
| NO_STR |
| "OSPF interface commands\n" |
| "Interface cost\n" |
| "Cost\n" |
| "Address of interface") |
| |
| static void |
| ospf_nbr_timer_update (struct ospf_interface *oi) |
| { |
| struct route_node *rn; |
| struct ospf_neighbor *nbr; |
| |
| for (rn = route_top (oi->nbrs); rn; rn = route_next (rn)) |
| if ((nbr = rn->info)) |
| { |
| nbr->v_inactivity = OSPF_IF_PARAM (oi, v_wait); |
| nbr->v_db_desc = OSPF_IF_PARAM (oi, retransmit_interval); |
| nbr->v_ls_req = OSPF_IF_PARAM (oi, retransmit_interval); |
| nbr->v_ls_upd = OSPF_IF_PARAM (oi, retransmit_interval); |
| } |
| } |
| |
| static int |
| ospf_vty_dead_interval_set (struct vty *vty, const char *interval_str, |
| const char *nbr_str, |
| const char *fast_hello_str) |
| { |
| struct interface *ifp = vty->index; |
| u_int32_t seconds; |
| u_char hellomult; |
| struct in_addr addr; |
| int ret; |
| struct ospf_if_params *params; |
| struct ospf_interface *oi; |
| struct route_node *rn; |
| |
| params = IF_DEF_PARAMS (ifp); |
| |
| if (nbr_str) |
| { |
| ret = inet_aton(nbr_str, &addr); |
| if (!ret) |
| { |
| vty_out (vty, "Please specify interface address by A.B.C.D%s", |
| VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| params = ospf_get_if_params (ifp, addr); |
| ospf_if_update_params (ifp, addr); |
| } |
| |
| if (interval_str) |
| { |
| VTY_GET_INTEGER_RANGE ("Router Dead Interval", seconds, interval_str, |
| 1, 65535); |
| |
| /* reset fast_hello too, just to be sure */ |
| UNSET_IF_PARAM (params, fast_hello); |
| params->fast_hello = OSPF_FAST_HELLO_DEFAULT; |
| } |
| else if (fast_hello_str) |
| { |
| VTY_GET_INTEGER_RANGE ("Hello Multiplier", hellomult, fast_hello_str, |
| 1, 10); |
| /* 1s dead-interval with sub-second hellos desired */ |
| seconds = OSPF_ROUTER_DEAD_INTERVAL_MINIMAL; |
| SET_IF_PARAM (params, fast_hello); |
| params->fast_hello = hellomult; |
| } |
| else |
| { |
| vty_out (vty, "Please specify dead-interval or hello-multiplier%s", |
| VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| SET_IF_PARAM (params, v_wait); |
| params->v_wait = seconds; |
| |
| /* Update timer values in neighbor structure. */ |
| if (nbr_str) |
| { |
| struct ospf *ospf; |
| if ((ospf = ospf_lookup())) |
| { |
| oi = ospf_if_lookup_by_local_addr (ospf, ifp, addr); |
| if (oi) |
| ospf_nbr_timer_update (oi); |
| } |
| } |
| else |
| { |
| for (rn = route_top (IF_OIFS (ifp)); rn; rn = route_next (rn)) |
| if ((oi = rn->info)) |
| ospf_nbr_timer_update (oi); |
| } |
| |
| return CMD_SUCCESS; |
| } |
| |
| |
| DEFUN (ip_ospf_dead_interval, |
| ip_ospf_dead_interval_addr_cmd, |
| "ip ospf dead-interval <1-65535> A.B.C.D", |
| "IP Information\n" |
| "OSPF interface commands\n" |
| "Interval after which a neighbor is declared dead\n" |
| "Seconds\n" |
| "Address of interface\n") |
| { |
| if (argc == 2) |
| return ospf_vty_dead_interval_set (vty, argv[0], argv[1], NULL); |
| else |
| return ospf_vty_dead_interval_set (vty, argv[0], NULL, NULL); |
| } |
| |
| ALIAS (ip_ospf_dead_interval, |
| ip_ospf_dead_interval_cmd, |
| "ip ospf dead-interval <1-65535>", |
| "IP Information\n" |
| "OSPF interface commands\n" |
| "Interval after which a neighbor is declared dead\n" |
| "Seconds\n") |
| |
| ALIAS (ip_ospf_dead_interval, |
| ospf_dead_interval_cmd, |
| "ospf dead-interval <1-65535>", |
| "OSPF interface commands\n" |
| "Interval after which a neighbor is declared dead\n" |
| "Seconds\n") |
| |
| DEFUN (ip_ospf_dead_interval_minimal, |
| ip_ospf_dead_interval_minimal_addr_cmd, |
| "ip ospf dead-interval minimal hello-multiplier <1-10> A.B.C.D", |
| "IP Information\n" |
| "OSPF interface commands\n" |
| "Interval after which a neighbor is declared dead\n" |
| "Minimal 1s dead-interval with fast sub-second hellos\n" |
| "Hello multiplier factor\n" |
| "Number of Hellos to send each second\n" |
| "Address of interface\n") |
| { |
| if (argc == 2) |
| return ospf_vty_dead_interval_set (vty, NULL, argv[1], argv[0]); |
| else |
| return ospf_vty_dead_interval_set (vty, NULL, NULL, argv[0]); |
| } |
| |
| ALIAS (ip_ospf_dead_interval_minimal, |
| ip_ospf_dead_interval_minimal_cmd, |
| "ip ospf dead-interval minimal hello-multiplier <1-10>", |
| "IP Information\n" |
| "OSPF interface commands\n" |
| "Interval after which a neighbor is declared dead\n" |
| "Minimal 1s dead-interval with fast sub-second hellos\n" |
| "Hello multiplier factor\n" |
| "Number of Hellos to send each second\n") |
| |
| DEFUN (no_ip_ospf_dead_interval, |
| no_ip_ospf_dead_interval_addr_cmd, |
| "no ip ospf dead-interval A.B.C.D", |
| NO_STR |
| "IP Information\n" |
| "OSPF interface commands\n" |
| "Interval after which a neighbor is declared dead\n" |
| "Address of interface") |
| { |
| struct interface *ifp = vty->index; |
| struct in_addr addr; |
| int ret; |
| struct ospf_if_params *params; |
| struct ospf_interface *oi; |
| struct route_node *rn; |
| |
| ifp = vty->index; |
| params = IF_DEF_PARAMS (ifp); |
| |
| if (argc == 1) |
| { |
| ret = inet_aton(argv[0], &addr); |
| if (!ret) |
| { |
| vty_out (vty, "Please specify interface address by A.B.C.D%s", |
| VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| params = ospf_lookup_if_params (ifp, addr); |
| if (params == NULL) |
| return CMD_SUCCESS; |
| } |
| |
| UNSET_IF_PARAM (params, v_wait); |
| params->v_wait = OSPF_ROUTER_DEAD_INTERVAL_DEFAULT; |
| |
| UNSET_IF_PARAM (params, fast_hello); |
| params->fast_hello = OSPF_FAST_HELLO_DEFAULT; |
| |
| if (params != IF_DEF_PARAMS (ifp)) |
| { |
| ospf_free_if_params (ifp, addr); |
| ospf_if_update_params (ifp, addr); |
| } |
| |
| /* Update timer values in neighbor structure. */ |
| if (argc == 1) |
| { |
| struct ospf *ospf; |
| |
| if ((ospf = ospf_lookup())) |
| { |
| oi = ospf_if_lookup_by_local_addr (ospf, ifp, addr); |
| if (oi) |
| ospf_nbr_timer_update (oi); |
| } |
| } |
| else |
| { |
| for (rn = route_top (IF_OIFS (ifp)); rn; rn = route_next (rn)) |
| if ((oi = rn->info)) |
| ospf_nbr_timer_update (oi); |
| } |
| |
| return CMD_SUCCESS; |
| } |
| |
| ALIAS (no_ip_ospf_dead_interval, |
| no_ip_ospf_dead_interval_cmd, |
| "no ip ospf dead-interval", |
| NO_STR |
| "IP Information\n" |
| "OSPF interface commands\n" |
| "Interval after which a neighbor is declared dead\n") |
| |
| ALIAS (no_ip_ospf_dead_interval, |
| no_ospf_dead_interval_cmd, |
| "no ospf dead-interval", |
| NO_STR |
| "OSPF interface commands\n" |
| "Interval after which a neighbor is declared dead\n") |
| |
| DEFUN (ip_ospf_hello_interval, |
| ip_ospf_hello_interval_addr_cmd, |
| "ip ospf hello-interval <1-65535> A.B.C.D", |
| "IP Information\n" |
| "OSPF interface commands\n" |
| "Time between HELLO packets\n" |
| "Seconds\n" |
| "Address of interface") |
| { |
| struct interface *ifp = vty->index; |
| u_int32_t seconds; |
| struct in_addr addr; |
| int ret; |
| struct ospf_if_params *params; |
| |
| params = IF_DEF_PARAMS (ifp); |
| |
| seconds = strtol (argv[0], NULL, 10); |
| |
| /* HelloInterval range is <1-65535>. */ |
| if (seconds < 1 || seconds > 65535) |
| { |
| vty_out (vty, "Hello Interval is invalid%s", VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| if (argc == 2) |
| { |
| ret = inet_aton(argv[1], &addr); |
| if (!ret) |
| { |
| vty_out (vty, "Please specify interface address by A.B.C.D%s", |
| VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| params = ospf_get_if_params (ifp, addr); |
| ospf_if_update_params (ifp, addr); |
| } |
| |
| SET_IF_PARAM (params, v_hello); |
| params->v_hello = seconds; |
| |
| return CMD_SUCCESS; |
| } |
| |
| ALIAS (ip_ospf_hello_interval, |
| ip_ospf_hello_interval_cmd, |
| "ip ospf hello-interval <1-65535>", |
| "IP Information\n" |
| "OSPF interface commands\n" |
| "Time between HELLO packets\n" |
| "Seconds\n") |
| |
| ALIAS (ip_ospf_hello_interval, |
| ospf_hello_interval_cmd, |
| "ospf hello-interval <1-65535>", |
| "OSPF interface commands\n" |
| "Time between HELLO packets\n" |
| "Seconds\n") |
| |
| DEFUN (no_ip_ospf_hello_interval, |
| no_ip_ospf_hello_interval_addr_cmd, |
| "no ip ospf hello-interval A.B.C.D", |
| NO_STR |
| "IP Information\n" |
| "OSPF interface commands\n" |
| "Time between HELLO packets\n" |
| "Address of interface") |
| { |
| struct interface *ifp = vty->index; |
| struct in_addr addr; |
| int ret; |
| struct ospf_if_params *params; |
| |
| ifp = vty->index; |
| params = IF_DEF_PARAMS (ifp); |
| |
| if (argc == 1) |
| { |
| ret = inet_aton(argv[0], &addr); |
| if (!ret) |
| { |
| vty_out (vty, "Please specify interface address by A.B.C.D%s", |
| VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| params = ospf_lookup_if_params (ifp, addr); |
| if (params == NULL) |
| return CMD_SUCCESS; |
| } |
| |
| UNSET_IF_PARAM (params, v_hello); |
| params->v_hello = OSPF_HELLO_INTERVAL_DEFAULT; |
| |
| if (params != IF_DEF_PARAMS (ifp)) |
| { |
| ospf_free_if_params (ifp, addr); |
| ospf_if_update_params (ifp, addr); |
| } |
| |
| return CMD_SUCCESS; |
| } |
| |
| ALIAS (no_ip_ospf_hello_interval, |
| no_ip_ospf_hello_interval_cmd, |
| "no ip ospf hello-interval", |
| NO_STR |
| "IP Information\n" |
| "OSPF interface commands\n" |
| "Time between HELLO packets\n") |
| |
| ALIAS (no_ip_ospf_hello_interval, |
| no_ospf_hello_interval_cmd, |
| "no ospf hello-interval", |
| NO_STR |
| "OSPF interface commands\n" |
| "Time between HELLO packets\n") |
| |
| DEFUN (ip_ospf_network, |
| ip_ospf_network_cmd, |
| "ip ospf network (broadcast|non-broadcast|point-to-multipoint|point-to-point)", |
| "IP Information\n" |
| "OSPF interface commands\n" |
| "Network type\n" |
| "Specify OSPF broadcast multi-access network\n" |
| "Specify OSPF NBMA network\n" |
| "Specify OSPF point-to-multipoint network\n" |
| "Specify OSPF point-to-point network\n") |
| { |
| struct interface *ifp = vty->index; |
| int old_type = IF_DEF_PARAMS (ifp)->type; |
| struct route_node *rn; |
| |
| if (old_type == OSPF_IFTYPE_LOOPBACK) |
| { |
| vty_out (vty, "This is a loopback interface. Can't set network type.%s", VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| if (strncmp (argv[0], "b", 1) == 0) |
| IF_DEF_PARAMS (ifp)->type = OSPF_IFTYPE_BROADCAST; |
| else if (strncmp (argv[0], "n", 1) == 0) |
| IF_DEF_PARAMS (ifp)->type = OSPF_IFTYPE_NBMA; |
| else if (strncmp (argv[0], "point-to-m", 10) == 0) |
| IF_DEF_PARAMS (ifp)->type = OSPF_IFTYPE_POINTOMULTIPOINT; |
| else if (strncmp (argv[0], "point-to-p", 10) == 0) |
| IF_DEF_PARAMS (ifp)->type = OSPF_IFTYPE_POINTOPOINT; |
| |
| if (IF_DEF_PARAMS (ifp)->type == old_type) |
| return CMD_SUCCESS; |
| |
| SET_IF_PARAM (IF_DEF_PARAMS (ifp), type); |
| |
| for (rn = route_top (IF_OIFS (ifp)); rn; rn = route_next (rn)) |
| { |
| struct ospf_interface *oi = rn->info; |
| |
| if (!oi) |
| continue; |
| |
| oi->type = IF_DEF_PARAMS (ifp)->type; |
| |
| if (oi->state > ISM_Down) |
| { |
| OSPF_ISM_EVENT_EXECUTE (oi, ISM_InterfaceDown); |
| OSPF_ISM_EVENT_EXECUTE (oi, ISM_InterfaceUp); |
| } |
| } |
| |
| return CMD_SUCCESS; |
| } |
| |
| ALIAS (ip_ospf_network, |
| ospf_network_cmd, |
| "ospf network (broadcast|non-broadcast|point-to-multipoint|point-to-point)", |
| "OSPF interface commands\n" |
| "Network type\n" |
| "Specify OSPF broadcast multi-access network\n" |
| "Specify OSPF NBMA network\n" |
| "Specify OSPF point-to-multipoint network\n" |
| "Specify OSPF point-to-point network\n") |
| |
| DEFUN (no_ip_ospf_network, |
| no_ip_ospf_network_cmd, |
| "no ip ospf network", |
| NO_STR |
| "IP Information\n" |
| "OSPF interface commands\n" |
| "Network type\n") |
| { |
| struct interface *ifp = vty->index; |
| int old_type = IF_DEF_PARAMS (ifp)->type; |
| struct route_node *rn; |
| |
| IF_DEF_PARAMS (ifp)->type = ospf_default_iftype(ifp); |
| |
| if (IF_DEF_PARAMS (ifp)->type == old_type) |
| return CMD_SUCCESS; |
| |
| for (rn = route_top (IF_OIFS (ifp)); rn; rn = route_next (rn)) |
| { |
| struct ospf_interface *oi = rn->info; |
| |
| if (!oi) |
| continue; |
| |
| oi->type = IF_DEF_PARAMS (ifp)->type; |
| |
| if (oi->state > ISM_Down) |
| { |
| OSPF_ISM_EVENT_EXECUTE (oi, ISM_InterfaceDown); |
| OSPF_ISM_EVENT_EXECUTE (oi, ISM_InterfaceUp); |
| } |
| } |
| |
| return CMD_SUCCESS; |
| } |
| |
| ALIAS (no_ip_ospf_network, |
| no_ospf_network_cmd, |
| "no ospf network", |
| NO_STR |
| "OSPF interface commands\n" |
| "Network type\n") |
| |
| DEFUN (ip_ospf_priority, |
| ip_ospf_priority_addr_cmd, |
| "ip ospf priority <0-255> A.B.C.D", |
| "IP Information\n" |
| "OSPF interface commands\n" |
| "Router priority\n" |
| "Priority\n" |
| "Address of interface") |
| { |
| struct interface *ifp = vty->index; |
| long priority; |
| struct route_node *rn; |
| struct in_addr addr; |
| int ret; |
| struct ospf_if_params *params; |
| |
| params = IF_DEF_PARAMS (ifp); |
| |
| priority = strtol (argv[0], NULL, 10); |
| |
| /* Router Priority range is <0-255>. */ |
| if (priority < 0 || priority > 255) |
| { |
| vty_out (vty, "Router Priority is invalid%s", VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| if (argc == 2) |
| { |
| ret = inet_aton(argv[1], &addr); |
| if (!ret) |
| { |
| vty_out (vty, "Please specify interface address by A.B.C.D%s", |
| VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| params = ospf_get_if_params (ifp, addr); |
| ospf_if_update_params (ifp, addr); |
| } |
| |
| SET_IF_PARAM (params, priority); |
| params->priority = priority; |
| |
| for (rn = route_top (IF_OIFS (ifp)); rn; rn = route_next (rn)) |
| { |
| struct ospf_interface *oi = rn->info; |
| |
| if (!oi) |
| continue; |
| |
| |
| if (PRIORITY (oi) != OSPF_IF_PARAM (oi, priority)) |
| { |
| PRIORITY (oi) = OSPF_IF_PARAM (oi, priority); |
| OSPF_ISM_EVENT_SCHEDULE (oi, ISM_NeighborChange); |
| } |
| } |
| |
| return CMD_SUCCESS; |
| } |
| |
| ALIAS (ip_ospf_priority, |
| ip_ospf_priority_cmd, |
| "ip ospf priority <0-255>", |
| "IP Information\n" |
| "OSPF interface commands\n" |
| "Router priority\n" |
| "Priority\n") |
| |
| ALIAS (ip_ospf_priority, |
| ospf_priority_cmd, |
| "ospf priority <0-255>", |
| "OSPF interface commands\n" |
| "Router priority\n" |
| "Priority\n") |
| |
| DEFUN (no_ip_ospf_priority, |
| no_ip_ospf_priority_addr_cmd, |
| "no ip ospf priority A.B.C.D", |
| NO_STR |
| "IP Information\n" |
| "OSPF interface commands\n" |
| "Router priority\n" |
| "Address of interface") |
| { |
| struct interface *ifp = vty->index; |
| struct route_node *rn; |
| struct in_addr addr; |
| int ret; |
| struct ospf_if_params *params; |
| |
| ifp = vty->index; |
| params = IF_DEF_PARAMS (ifp); |
| |
| if (argc == 1) |
| { |
| ret = inet_aton(argv[0], &addr); |
| if (!ret) |
| { |
| vty_out (vty, "Please specify interface address by A.B.C.D%s", |
| VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| params = ospf_lookup_if_params (ifp, addr); |
| if (params == NULL) |
| return CMD_SUCCESS; |
| } |
| |
| UNSET_IF_PARAM (params, priority); |
| params->priority = OSPF_ROUTER_PRIORITY_DEFAULT; |
| |
| if (params != IF_DEF_PARAMS (ifp)) |
| { |
| ospf_free_if_params (ifp, addr); |
| ospf_if_update_params (ifp, addr); |
| } |
| |
| for (rn = route_top (IF_OIFS (ifp)); rn; rn = route_next (rn)) |
| { |
| struct ospf_interface *oi = rn->info; |
| |
| if (!oi) |
| continue; |
| |
| |
| if (PRIORITY (oi) != OSPF_IF_PARAM (oi, priority)) |
| { |
| PRIORITY (oi) = OSPF_IF_PARAM (oi, priority); |
| OSPF_ISM_EVENT_SCHEDULE (oi, ISM_NeighborChange); |
| } |
| } |
| |
| return CMD_SUCCESS; |
| } |
| |
| ALIAS (no_ip_ospf_priority, |
| no_ip_ospf_priority_cmd, |
| "no ip ospf priority", |
| NO_STR |
| "IP Information\n" |
| "OSPF interface commands\n" |
| "Router priority\n") |
| |
| ALIAS (no_ip_ospf_priority, |
| no_ospf_priority_cmd, |
| "no ospf priority", |
| NO_STR |
| "OSPF interface commands\n" |
| "Router priority\n") |
| |
| DEFUN (ip_ospf_retransmit_interval, |
| ip_ospf_retransmit_interval_addr_cmd, |
| "ip ospf retransmit-interval <3-65535> A.B.C.D", |
| "IP Information\n" |
| "OSPF interface commands\n" |
| "Time between retransmitting lost link state advertisements\n" |
| "Seconds\n" |
| "Address of interface") |
| { |
| struct interface *ifp = vty->index; |
| u_int32_t seconds; |
| struct in_addr addr; |
| int ret; |
| struct ospf_if_params *params; |
| |
| params = IF_DEF_PARAMS (ifp); |
| seconds = strtol (argv[0], NULL, 10); |
| |
| /* Retransmit Interval range is <3-65535>. */ |
| if (seconds < 3 || seconds > 65535) |
| { |
| vty_out (vty, "Retransmit Interval is invalid%s", VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| |
| if (argc == 2) |
| { |
| ret = inet_aton(argv[1], &addr); |
| if (!ret) |
| { |
| vty_out (vty, "Please specify interface address by A.B.C.D%s", |
| VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| params = ospf_get_if_params (ifp, addr); |
| ospf_if_update_params (ifp, addr); |
| } |
| |
| SET_IF_PARAM (params, retransmit_interval); |
| params->retransmit_interval = seconds; |
| |
| return CMD_SUCCESS; |
| } |
| |
| ALIAS (ip_ospf_retransmit_interval, |
| ip_ospf_retransmit_interval_cmd, |
| "ip ospf retransmit-interval <3-65535>", |
| "IP Information\n" |
| "OSPF interface commands\n" |
| "Time between retransmitting lost link state advertisements\n" |
| "Seconds\n") |
| |
| ALIAS (ip_ospf_retransmit_interval, |
| ospf_retransmit_interval_cmd, |
| "ospf retransmit-interval <3-65535>", |
| "OSPF interface commands\n" |
| "Time between retransmitting lost link state advertisements\n" |
| "Seconds\n") |
| |
| DEFUN (no_ip_ospf_retransmit_interval, |
| no_ip_ospf_retransmit_interval_addr_cmd, |
| "no ip ospf retransmit-interval A.B.C.D", |
| NO_STR |
| "IP Information\n" |
| "OSPF interface commands\n" |
| "Time between retransmitting lost link state advertisements\n" |
| "Address of interface") |
| { |
| struct interface *ifp = vty->index; |
| struct in_addr addr; |
| int ret; |
| struct ospf_if_params *params; |
| |
| ifp = vty->index; |
| params = IF_DEF_PARAMS (ifp); |
| |
| if (argc == 1) |
| { |
| ret = inet_aton(argv[0], &addr); |
| if (!ret) |
| { |
| vty_out (vty, "Please specify interface address by A.B.C.D%s", |
| VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| params = ospf_lookup_if_params (ifp, addr); |
| if (params == NULL) |
| return CMD_SUCCESS; |
| } |
| |
| UNSET_IF_PARAM (params, retransmit_interval); |
| params->retransmit_interval = OSPF_RETRANSMIT_INTERVAL_DEFAULT; |
| |
| if (params != IF_DEF_PARAMS (ifp)) |
| { |
| ospf_free_if_params (ifp, addr); |
| ospf_if_update_params (ifp, addr); |
| } |
| |
| return CMD_SUCCESS; |
| } |
| |
| ALIAS (no_ip_ospf_retransmit_interval, |
| no_ip_ospf_retransmit_interval_cmd, |
| "no ip ospf retransmit-interval", |
| NO_STR |
| "IP Information\n" |
| "OSPF interface commands\n" |
| "Time between retransmitting lost link state advertisements\n") |
| |
| ALIAS (no_ip_ospf_retransmit_interval, |
| no_ospf_retransmit_interval_cmd, |
| "no ospf retransmit-interval", |
| NO_STR |
| "OSPF interface commands\n" |
| "Time between retransmitting lost link state advertisements\n") |
| |
| DEFUN (ip_ospf_transmit_delay, |
| ip_ospf_transmit_delay_addr_cmd, |
| "ip ospf transmit-delay <1-65535> A.B.C.D", |
| "IP Information\n" |
| "OSPF interface commands\n" |
| "Link state transmit delay\n" |
| "Seconds\n" |
| "Address of interface") |
| { |
| struct interface *ifp = vty->index; |
| u_int32_t seconds; |
| struct in_addr addr; |
| int ret; |
| struct ospf_if_params *params; |
| |
| params = IF_DEF_PARAMS (ifp); |
| seconds = strtol (argv[0], NULL, 10); |
| |
| /* Transmit Delay range is <1-65535>. */ |
| if (seconds < 1 || seconds > 65535) |
| { |
| vty_out (vty, "Transmit Delay is invalid%s", VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| if (argc == 2) |
| { |
| ret = inet_aton(argv[1], &addr); |
| if (!ret) |
| { |
| vty_out (vty, "Please specify interface address by A.B.C.D%s", |
| VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| params = ospf_get_if_params (ifp, addr); |
| ospf_if_update_params (ifp, addr); |
| } |
| |
| SET_IF_PARAM (params, transmit_delay); |
| params->transmit_delay = seconds; |
| |
| return CMD_SUCCESS; |
| } |
| |
| ALIAS (ip_ospf_transmit_delay, |
| ip_ospf_transmit_delay_cmd, |
| "ip ospf transmit-delay <1-65535>", |
| "IP Information\n" |
| "OSPF interface commands\n" |
| "Link state transmit delay\n" |
| "Seconds\n") |
| |
| ALIAS (ip_ospf_transmit_delay, |
| ospf_transmit_delay_cmd, |
| "ospf transmit-delay <1-65535>", |
| "OSPF interface commands\n" |
| "Link state transmit delay\n" |
| "Seconds\n") |
| |
| DEFUN (no_ip_ospf_transmit_delay, |
| no_ip_ospf_transmit_delay_addr_cmd, |
| "no ip ospf transmit-delay A.B.C.D", |
| NO_STR |
| "IP Information\n" |
| "OSPF interface commands\n" |
| "Link state transmit delay\n" |
| "Address of interface") |
| { |
| struct interface *ifp = vty->index; |
| struct in_addr addr; |
| int ret; |
| struct ospf_if_params *params; |
| |
| ifp = vty->index; |
| params = IF_DEF_PARAMS (ifp); |
| |
| if (argc == 1) |
| { |
| ret = inet_aton(argv[0], &addr); |
| if (!ret) |
| { |
| vty_out (vty, "Please specify interface address by A.B.C.D%s", |
| VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| params = ospf_lookup_if_params (ifp, addr); |
| if (params == NULL) |
| return CMD_SUCCESS; |
| } |
| |
| UNSET_IF_PARAM (params, transmit_delay); |
| params->transmit_delay = OSPF_TRANSMIT_DELAY_DEFAULT; |
| |
| if (params != IF_DEF_PARAMS (ifp)) |
| { |
| ospf_free_if_params (ifp, addr); |
| ospf_if_update_params (ifp, addr); |
| } |
| |
| return CMD_SUCCESS; |
| } |
| |
| ALIAS (no_ip_ospf_transmit_delay, |
| no_ip_ospf_transmit_delay_cmd, |
| "no ip ospf transmit-delay", |
| NO_STR |
| "IP Information\n" |
| "OSPF interface commands\n" |
| "Link state transmit delay\n") |
| |
| ALIAS (no_ip_ospf_transmit_delay, |
| no_ospf_transmit_delay_cmd, |
| "no ospf transmit-delay", |
| NO_STR |
| "OSPF interface commands\n" |
| "Link state transmit delay\n") |
| |
| DEFUN (ospf_redistribute_source, |
| ospf_redistribute_source_cmd, |
| "redistribute " QUAGGA_REDIST_STR_OSPFD |
| " {metric <0-16777214>|metric-type (1|2)|route-map WORD}", |
| REDIST_STR |
| QUAGGA_REDIST_HELP_STR_OSPFD |
| "Metric for redistributed routes\n" |
| "OSPF default metric\n" |
| "OSPF exterior metric type for redistributed routes\n" |
| "Set OSPF External Type 1 metrics\n" |
| "Set OSPF External Type 2 metrics\n" |
| "Route map reference\n" |
| "Pointer to route-map entries\n") |
| { |
| struct ospf *ospf = vty->index; |
| int source; |
| int type = -1; |
| int metric = -1; |
| |
| if (argc < 4) |
| return CMD_WARNING; /* should not happen */ |
| |
| /* Get distribute source. */ |
| source = proto_redistnum(AFI_IP, argv[0]); |
| if (source < 0 || source == ZEBRA_ROUTE_OSPF) |
| return CMD_WARNING; |
| |
| /* Get metric value. */ |
| if (argv[1] != NULL) |
| if (!str2metric (argv[1], &metric)) |
| return CMD_WARNING; |
| |
| /* Get metric type. */ |
| if (argv[2] != NULL) |
| if (!str2metric_type (argv[2], &type)) |
| return CMD_WARNING; |
| |
| if (argv[3] != NULL) |
| ospf_routemap_set (ospf, source, argv[3]); |
| else |
| ospf_routemap_unset (ospf, source); |
| |
| return ospf_redistribute_set (ospf, source, type, metric); |
| } |
| |
| DEFUN (no_ospf_redistribute_source, |
| no_ospf_redistribute_source_cmd, |
| "no redistribute " QUAGGA_REDIST_STR_OSPFD, |
| NO_STR |
| REDIST_STR |
| QUAGGA_REDIST_HELP_STR_OSPFD) |
| { |
| struct ospf *ospf = vty->index; |
| int source; |
| |
| source = proto_redistnum(AFI_IP, argv[0]); |
| if (source < 0 || source == ZEBRA_ROUTE_OSPF) |
| return CMD_WARNING; |
| |
| ospf_routemap_unset (ospf, source); |
| return ospf_redistribute_unset (ospf, source); |
| } |
| |
| DEFUN (ospf_distribute_list_out, |
| ospf_distribute_list_out_cmd, |
| "distribute-list WORD out " QUAGGA_REDIST_STR_OSPFD, |
| "Filter networks in routing updates\n" |
| "Access-list name\n" |
| OUT_STR |
| QUAGGA_REDIST_HELP_STR_OSPFD) |
| { |
| struct ospf *ospf = vty->index; |
| int source; |
| |
| /* Get distribute source. */ |
| source = proto_redistnum(AFI_IP, argv[1]); |
| if (source < 0 || source == ZEBRA_ROUTE_OSPF) |
| return CMD_WARNING; |
| |
| return ospf_distribute_list_out_set (ospf, source, argv[0]); |
| } |
| |
| DEFUN (no_ospf_distribute_list_out, |
| no_ospf_distribute_list_out_cmd, |
| "no distribute-list WORD out " QUAGGA_REDIST_STR_OSPFD, |
| NO_STR |
| "Filter networks in routing updates\n" |
| "Access-list name\n" |
| OUT_STR |
| QUAGGA_REDIST_HELP_STR_OSPFD) |
| { |
| struct ospf *ospf = vty->index; |
| int source; |
| |
| source = proto_redistnum(AFI_IP, argv[1]); |
| if (source < 0 || source == ZEBRA_ROUTE_OSPF) |
| return CMD_WARNING; |
| |
| return ospf_distribute_list_out_unset (ospf, source, argv[0]); |
| } |
| |
| /* Default information originate. */ |
| DEFUN (ospf_default_information_originate, |
| ospf_default_information_originate_cmd, |
| "default-information originate " |
| "{always|metric <0-16777214>|metric-type (1|2)|route-map WORD}", |
| "Control distribution of default information\n" |
| "Distribute a default route\n" |
| "Always advertise default route\n" |
| "OSPF default metric\n" |
| "OSPF metric\n" |
| "OSPF metric type for default routes\n" |
| "Set OSPF External Type 1 metrics\n" |
| "Set OSPF External Type 2 metrics\n" |
| "Route map reference\n" |
| "Pointer to route-map entries\n") |
| { |
| struct ospf *ospf = vty->index; |
| int default_originate = DEFAULT_ORIGINATE_ZEBRA; |
| int type = -1; |
| int metric = -1; |
| |
| if (argc < 4) |
| return CMD_WARNING; /* this should not happen */ |
| |
| /* Check whether "always" was specified */ |
| if (argv[0] != NULL) |
| default_originate = DEFAULT_ORIGINATE_ALWAYS; |
| |
| /* Get metric value. */ |
| if (argv[1] != NULL) |
| if (!str2metric (argv[1], &metric)) |
| return CMD_WARNING; |
| |
| /* Get metric type. */ |
| if (argv[2] != NULL) |
| if (!str2metric_type (argv[2], &type)) |
| return CMD_WARNING; |
| |
| if (argv[3] != NULL) |
| ospf_routemap_set (ospf, DEFAULT_ROUTE, argv[3]); |
| else |
| ospf_routemap_unset (ospf, DEFAULT_ROUTE); |
| |
| return ospf_redistribute_default_set (ospf, default_originate, |
| type, metric); |
| } |
| |
| DEFUN (no_ospf_default_information_originate, |
| no_ospf_default_information_originate_cmd, |
| "no default-information originate", |
| NO_STR |
| "Control distribution of default information\n" |
| "Distribute a default route\n") |
| { |
| struct ospf *ospf = vty->index; |
| struct prefix_ipv4 p; |
| |
| p.family = AF_INET; |
| p.prefix.s_addr = 0; |
| p.prefixlen = 0; |
| |
| ospf_external_lsa_flush (ospf, DEFAULT_ROUTE, &p, 0); |
| |
| if (EXTERNAL_INFO (DEFAULT_ROUTE)) { |
| ospf_external_info_delete (DEFAULT_ROUTE, p); |
| route_table_finish (EXTERNAL_INFO (DEFAULT_ROUTE)); |
| EXTERNAL_INFO (DEFAULT_ROUTE) = NULL; |
| } |
| |
| ospf_routemap_unset (ospf, DEFAULT_ROUTE); |
| return ospf_redistribute_default_unset (ospf); |
| } |
| |
| DEFUN (ospf_default_metric, |
| ospf_default_metric_cmd, |
| "default-metric <0-16777214>", |
| "Set metric of redistributed routes\n" |
| "Default metric\n") |
| { |
| struct ospf *ospf = vty->index; |
| int metric = -1; |
| |
| if (!str2metric (argv[0], &metric)) |
| return CMD_WARNING; |
| |
| ospf->default_metric = metric; |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (no_ospf_default_metric, |
| no_ospf_default_metric_cmd, |
| "no default-metric", |
| NO_STR |
| "Set metric of redistributed routes\n") |
| { |
| struct ospf *ospf = vty->index; |
| |
| ospf->default_metric = -1; |
| |
| return CMD_SUCCESS; |
| } |
| |
| ALIAS (no_ospf_default_metric, |
| no_ospf_default_metric_val_cmd, |
| "no default-metric <0-16777214>", |
| NO_STR |
| "Set metric of redistributed routes\n" |
| "Default metric\n") |
| |
| DEFUN (ospf_distance, |
| ospf_distance_cmd, |
| "distance <1-255>", |
| "Define an administrative distance\n" |
| "OSPF Administrative distance\n") |
| { |
| struct ospf *ospf = vty->index; |
| |
| ospf->distance_all = atoi (argv[0]); |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (no_ospf_distance, |
| no_ospf_distance_cmd, |
| "no distance <1-255>", |
| NO_STR |
| "Define an administrative distance\n" |
| "OSPF Administrative distance\n") |
| { |
| struct ospf *ospf = vty->index; |
| |
| ospf->distance_all = 0; |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (no_ospf_distance_ospf, |
| no_ospf_distance_ospf_cmd, |
| "no distance ospf {intra-area|inter-area|external}", |
| NO_STR |
| "Define an administrative distance\n" |
| "OSPF Administrative distance\n" |
| "OSPF Distance\n" |
| "Intra-area routes\n" |
| "Inter-area routes\n" |
| "External routes\n") |
| { |
| struct ospf *ospf = vty->index; |
| |
| if (argc < 3) |
| return CMD_WARNING; |
| |
| if (argv[0] != NULL) |
| ospf->distance_intra = 0; |
| |
| if (argv[1] != NULL) |
| ospf->distance_inter = 0; |
| |
| if (argv[2] != NULL) |
| ospf->distance_external = 0; |
| |
| if (argv[0] || argv[1] || argv[2]) |
| return CMD_SUCCESS; |
| |
| /* If no arguments are given, clear all distance information */ |
| ospf->distance_intra = 0; |
| ospf->distance_inter = 0; |
| ospf->distance_external = 0; |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (ospf_distance_ospf, |
| ospf_distance_ospf_cmd, |
| "distance ospf " |
| "{intra-area <1-255>|inter-area <1-255>|external <1-255>}", |
| "Define an administrative distance\n" |
| "OSPF Administrative distance\n" |
| "Intra-area routes\n" |
| "Distance for intra-area routes\n" |
| "Inter-area routes\n" |
| "Distance for inter-area routes\n" |
| "External routes\n" |
| "Distance for external routes\n") |
| { |
| struct ospf *ospf = vty->index; |
| |
| if (argc < 3) /* should not happen */ |
| return CMD_WARNING; |
| |
| if (!argv[0] && !argv[1] && !argv[2]) |
| { |
| vty_out(vty, "%% Command incomplete. (Arguments required)%s", |
| VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| if (argv[0] != NULL) |
| ospf->distance_intra = atoi(argv[0]); |
| |
| if (argv[1] != NULL) |
| ospf->distance_inter = atoi(argv[1]); |
| |
| if (argv[2] != NULL) |
| ospf->distance_external = atoi(argv[2]); |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (ospf_distance_source, |
| ospf_distance_source_cmd, |
| "distance <1-255> A.B.C.D/M", |
| "Administrative distance\n" |
| "Distance value\n" |
| "IP source prefix\n") |
| { |
| struct ospf *ospf = vty->index; |
| |
| ospf_distance_set (vty, ospf, argv[0], argv[1], NULL); |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (no_ospf_distance_source, |
| no_ospf_distance_source_cmd, |
| "no distance <1-255> A.B.C.D/M", |
| NO_STR |
| "Administrative distance\n" |
| "Distance value\n" |
| "IP source prefix\n") |
| { |
| struct ospf *ospf = vty->index; |
| |
| ospf_distance_unset (vty, ospf, argv[0], argv[1], NULL); |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (ospf_distance_source_access_list, |
| ospf_distance_source_access_list_cmd, |
| "distance <1-255> A.B.C.D/M WORD", |
| "Administrative distance\n" |
| "Distance value\n" |
| "IP source prefix\n" |
| "Access list name\n") |
| { |
| struct ospf *ospf = vty->index; |
| |
| ospf_distance_set (vty, ospf, argv[0], argv[1], argv[2]); |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (no_ospf_distance_source_access_list, |
| no_ospf_distance_source_access_list_cmd, |
| "no distance <1-255> A.B.C.D/M WORD", |
| NO_STR |
| "Administrative distance\n" |
| "Distance value\n" |
| "IP source prefix\n" |
| "Access list name\n") |
| { |
| struct ospf *ospf = vty->index; |
| |
| ospf_distance_unset (vty, ospf, argv[0], argv[1], argv[2]); |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (ip_ospf_mtu_ignore, |
| ip_ospf_mtu_ignore_addr_cmd, |
| "ip ospf mtu-ignore A.B.C.D", |
| "IP Information\n" |
| "OSPF interface commands\n" |
| "Disable mtu mismatch detection\n" |
| "Address of interface") |
| { |
| struct interface *ifp = vty->index; |
| struct in_addr addr; |
| int ret; |
| |
| struct ospf_if_params *params; |
| params = IF_DEF_PARAMS (ifp); |
| |
| if (argc == 1) |
| { |
| ret = inet_aton(argv[0], &addr); |
| if (!ret) |
| { |
| vty_out (vty, "Please specify interface address by A.B.C.D%s", |
| VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| params = ospf_get_if_params (ifp, addr); |
| ospf_if_update_params (ifp, addr); |
| } |
| params->mtu_ignore = 1; |
| if (params->mtu_ignore != OSPF_MTU_IGNORE_DEFAULT) |
| SET_IF_PARAM (params, mtu_ignore); |
| else |
| { |
| UNSET_IF_PARAM (params, mtu_ignore); |
| if (params != IF_DEF_PARAMS (ifp)) |
| { |
| ospf_free_if_params (ifp, addr); |
| ospf_if_update_params (ifp, addr); |
| } |
| } |
| return CMD_SUCCESS; |
| } |
| |
| ALIAS (ip_ospf_mtu_ignore, |
| ip_ospf_mtu_ignore_cmd, |
| "ip ospf mtu-ignore", |
| "IP Information\n" |
| "OSPF interface commands\n" |
| "Disable mtu mismatch detection\n") |
| |
| |
| DEFUN (no_ip_ospf_mtu_ignore, |
| no_ip_ospf_mtu_ignore_addr_cmd, |
| "no ip ospf mtu-ignore A.B.C.D", |
| "IP Information\n" |
| "OSPF interface commands\n" |
| "Disable mtu mismatch detection\n" |
| "Address of interface") |
| { |
| struct interface *ifp = vty->index; |
| struct in_addr addr; |
| int ret; |
| |
| struct ospf_if_params *params; |
| params = IF_DEF_PARAMS (ifp); |
| |
| if (argc == 1) |
| { |
| ret = inet_aton(argv[0], &addr); |
| if (!ret) |
| { |
| vty_out (vty, "Please specify interface address by A.B.C.D%s", |
| VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| params = ospf_get_if_params (ifp, addr); |
| ospf_if_update_params (ifp, addr); |
| } |
| params->mtu_ignore = 0; |
| if (params->mtu_ignore != OSPF_MTU_IGNORE_DEFAULT) |
| SET_IF_PARAM (params, mtu_ignore); |
| else |
| { |
| UNSET_IF_PARAM (params, mtu_ignore); |
| if (params != IF_DEF_PARAMS (ifp)) |
| { |
| ospf_free_if_params (ifp, addr); |
| ospf_if_update_params (ifp, addr); |
| } |
| } |
| return CMD_SUCCESS; |
| } |
| |
| ALIAS (no_ip_ospf_mtu_ignore, |
| no_ip_ospf_mtu_ignore_cmd, |
| "no ip ospf mtu-ignore", |
| "IP Information\n" |
| "OSPF interface commands\n" |
| "Disable mtu mismatch detection\n") |
| |
| DEFUN (ospf_max_metric_router_lsa_admin, |
| ospf_max_metric_router_lsa_admin_cmd, |
| "max-metric router-lsa administrative", |
| "OSPF maximum / infinite-distance metric\n" |
| "Advertise own Router-LSA with infinite distance (stub router)\n" |
| "Administratively applied, for an indefinite period\n") |
| { |
| struct listnode *ln; |
| struct ospf_area *area; |
| struct ospf *ospf = vty->index; |
| |
| for (ALL_LIST_ELEMENTS_RO (ospf->areas, ln, area)) |
| { |
| SET_FLAG (area->stub_router_state, OSPF_AREA_ADMIN_STUB_ROUTED); |
| |
| if (!CHECK_FLAG (area->stub_router_state, OSPF_AREA_IS_STUB_ROUTED)) |
| ospf_router_lsa_update_area (area); |
| } |
| |
| /* Allows for areas configured later to get the property */ |
| ospf->stub_router_admin_set = OSPF_STUB_ROUTER_ADMINISTRATIVE_SET; |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (no_ospf_max_metric_router_lsa_admin, |
| no_ospf_max_metric_router_lsa_admin_cmd, |
| "no max-metric router-lsa administrative", |
| NO_STR |
| "OSPF maximum / infinite-distance metric\n" |
| "Advertise own Router-LSA with infinite distance (stub router)\n" |
| "Administratively applied, for an indefinite period\n") |
| { |
| struct listnode *ln; |
| struct ospf_area *area; |
| struct ospf *ospf = vty->index; |
| |
| for (ALL_LIST_ELEMENTS_RO (ospf->areas, ln, area)) |
| { |
| UNSET_FLAG (area->stub_router_state, OSPF_AREA_ADMIN_STUB_ROUTED); |
| |
| /* Don't trample on the start-up stub timer */ |
| if (CHECK_FLAG (area->stub_router_state, OSPF_AREA_IS_STUB_ROUTED) |
| && !area->t_stub_router) |
| { |
| UNSET_FLAG (area->stub_router_state, OSPF_AREA_IS_STUB_ROUTED); |
| ospf_router_lsa_update_area (area); |
| } |
| } |
| ospf->stub_router_admin_set = OSPF_STUB_ROUTER_ADMINISTRATIVE_UNSET; |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (ospf_max_metric_router_lsa_startup, |
| ospf_max_metric_router_lsa_startup_cmd, |
| "max-metric router-lsa on-startup <5-86400>", |
| "OSPF maximum / infinite-distance metric\n" |
| "Advertise own Router-LSA with infinite distance (stub router)\n" |
| "Automatically advertise stub Router-LSA on startup of OSPF\n" |
| "Time (seconds) to advertise self as stub-router\n") |
| { |
| unsigned int seconds; |
| struct ospf *ospf = vty->index; |
| |
| if (argc != 1) |
| { |
| vty_out (vty, "%% Must supply stub-router period"); |
| return CMD_WARNING; |
| } |
| |
| VTY_GET_INTEGER ("stub-router startup period", seconds, argv[0]); |
| |
| ospf->stub_router_startup_time = seconds; |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (no_ospf_max_metric_router_lsa_startup, |
| no_ospf_max_metric_router_lsa_startup_cmd, |
| "no max-metric router-lsa on-startup", |
| NO_STR |
| "OSPF maximum / infinite-distance metric\n" |
| "Advertise own Router-LSA with infinite distance (stub router)\n" |
| "Automatically advertise stub Router-LSA on startup of OSPF\n") |
| { |
| struct listnode *ln; |
| struct ospf_area *area; |
| struct ospf *ospf = vty->index; |
| |
| ospf->stub_router_startup_time = OSPF_STUB_ROUTER_UNCONFIGURED; |
| |
| for (ALL_LIST_ELEMENTS_RO (ospf->areas, ln, area)) |
| { |
| SET_FLAG (area->stub_router_state, OSPF_AREA_WAS_START_STUB_ROUTED); |
| OSPF_TIMER_OFF (area->t_stub_router); |
| |
| /* Don't trample on admin stub routed */ |
| if (!CHECK_FLAG (area->stub_router_state, OSPF_AREA_ADMIN_STUB_ROUTED)) |
| { |
| UNSET_FLAG (area->stub_router_state, OSPF_AREA_IS_STUB_ROUTED); |
| ospf_router_lsa_update_area (area); |
| } |
| } |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (ospf_max_metric_router_lsa_shutdown, |
| ospf_max_metric_router_lsa_shutdown_cmd, |
| "max-metric router-lsa on-shutdown <5-86400>", |
| "OSPF maximum / infinite-distance metric\n" |
| "Advertise own Router-LSA with infinite distance (stub router)\n" |
| "Advertise stub-router prior to full shutdown of OSPF\n" |
| "Time (seconds) to wait till full shutdown\n") |
| { |
| unsigned int seconds; |
| struct ospf *ospf = vty->index; |
| |
| if (argc != 1) |
| { |
| vty_out (vty, "%% Must supply stub-router shutdown period"); |
| return CMD_WARNING; |
| } |
| |
| VTY_GET_INTEGER ("stub-router shutdown wait period", seconds, argv[0]); |
| |
| ospf->stub_router_shutdown_time = seconds; |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (no_ospf_max_metric_router_lsa_shutdown, |
| no_ospf_max_metric_router_lsa_shutdown_cmd, |
| "no max-metric router-lsa on-shutdown", |
| NO_STR |
| "OSPF maximum / infinite-distance metric\n" |
| "Advertise own Router-LSA with infinite distance (stub router)\n" |
| "Advertise stub-router prior to full shutdown of OSPF\n") |
| { |
| struct ospf *ospf = vty->index; |
| |
| ospf->stub_router_shutdown_time = OSPF_STUB_ROUTER_UNCONFIGURED; |
| |
| return CMD_SUCCESS; |
| } |
| |
| static void |
| config_write_stub_router (struct vty *vty, struct ospf *ospf) |
| { |
| struct listnode *ln; |
| struct ospf_area *area; |
| |
| if (ospf->stub_router_startup_time != OSPF_STUB_ROUTER_UNCONFIGURED) |
| vty_out (vty, " max-metric router-lsa on-startup %u%s", |
| ospf->stub_router_startup_time, VTY_NEWLINE); |
| if (ospf->stub_router_shutdown_time != OSPF_STUB_ROUTER_UNCONFIGURED) |
| vty_out (vty, " max-metric router-lsa on-shutdown %u%s", |
| ospf->stub_router_shutdown_time, VTY_NEWLINE); |
| for (ALL_LIST_ELEMENTS_RO (ospf->areas, ln, area)) |
| { |
| if (CHECK_FLAG (area->stub_router_state, OSPF_AREA_ADMIN_STUB_ROUTED)) |
| { |
| vty_out (vty, " max-metric router-lsa administrative%s", |
| VTY_NEWLINE); |
| break; |
| } |
| } |
| return; |
| } |
| |
| static void |
| show_ip_ospf_route_network (struct vty *vty, struct route_table *rt) |
| { |
| struct route_node *rn; |
| struct ospf_route *or; |
| struct listnode *pnode, *pnnode; |
| struct ospf_path *path; |
| |
| vty_out (vty, "============ OSPF network routing table ============%s", |
| VTY_NEWLINE); |
| |
| for (rn = route_top (rt); rn; rn = route_next (rn)) |
| if ((or = rn->info) != NULL) |
| { |
| char buf1[19]; |
| snprintf (buf1, 19, "%s/%d", |
| inet_ntoa (rn->p.u.prefix4), rn->p.prefixlen); |
| |
| switch (or->path_type) |
| { |
| case OSPF_PATH_INTER_AREA: |
| if (or->type == OSPF_DESTINATION_NETWORK) |
| vty_out (vty, "N IA %-18s [%d] area: %s%s", buf1, or->cost, |
| inet_ntoa (or->u.std.area_id), VTY_NEWLINE); |
| else if (or->type == OSPF_DESTINATION_DISCARD) |
| vty_out (vty, "D IA %-18s Discard entry%s", buf1, VTY_NEWLINE); |
| break; |
| case OSPF_PATH_INTRA_AREA: |
| vty_out (vty, "N %-18s [%d] area: %s%s", buf1, or->cost, |
| inet_ntoa (or->u.std.area_id), VTY_NEWLINE); |
| break; |
| default: |
| break; |
| } |
| |
| if (or->type == OSPF_DESTINATION_NETWORK) |
| for (ALL_LIST_ELEMENTS (or->paths, pnode, pnnode, path)) |
| { |
| if (if_lookup_by_index(path->ifindex)) |
| { |
| if (path->nexthop.s_addr == 0) |
| vty_out (vty, "%24s directly attached to %s%s", |
| "", ifindex2ifname (path->ifindex), VTY_NEWLINE); |
| else |
| vty_out (vty, "%24s via %s, %s%s", "", |
| inet_ntoa (path->nexthop), |
| ifindex2ifname (path->ifindex), VTY_NEWLINE); |
| } |
| } |
| } |
| vty_out (vty, "%s", VTY_NEWLINE); |
| } |
| |
| static void |
| show_ip_ospf_route_router (struct vty *vty, struct route_table *rtrs) |
| { |
| struct route_node *rn; |
| struct ospf_route *or; |
| struct listnode *pnode; |
| struct listnode *node; |
| struct ospf_path *path; |
| |
| vty_out (vty, "============ OSPF router routing table =============%s", |
| VTY_NEWLINE); |
| for (rn = route_top (rtrs); rn; rn = route_next (rn)) |
| if (rn->info) |
| { |
| int flag = 0; |
| |
| vty_out (vty, "R %-15s ", inet_ntoa (rn->p.u.prefix4)); |
| |
| for (ALL_LIST_ELEMENTS_RO ((struct list *)rn->info, node, or)) |
| { |
| if (flag++) |
| vty_out (vty, "%24s", ""); |
| |
| /* Show path. */ |
| vty_out (vty, "%s [%d] area: %s", |
| (or->path_type == OSPF_PATH_INTER_AREA ? "IA" : " "), |
| or->cost, inet_ntoa (or->u.std.area_id)); |
| /* Show flags. */ |
| vty_out (vty, "%s%s%s", |
| (or->u.std.flags & ROUTER_LSA_BORDER ? ", ABR" : ""), |
| (or->u.std.flags & ROUTER_LSA_EXTERNAL ? ", ASBR" : ""), |
| VTY_NEWLINE); |
| |
| for (ALL_LIST_ELEMENTS_RO (or->paths, pnode, path)) |
| { |
| if (if_lookup_by_index(path->ifindex)) |
| { |
| if (path->nexthop.s_addr == 0) |
| vty_out (vty, "%24s directly attached to %s%s", |
| "", ifindex2ifname (path->ifindex), |
| VTY_NEWLINE); |
| else |
| vty_out (vty, "%24s via %s, %s%s", "", |
| inet_ntoa (path->nexthop), |
| ifindex2ifname (path->ifindex), |
| VTY_NEWLINE); |
| } |
| } |
| } |
| } |
| vty_out (vty, "%s", VTY_NEWLINE); |
| } |
| |
| static void |
| show_ip_ospf_route_external (struct vty *vty, struct route_table *rt) |
| { |
| struct route_node *rn; |
| struct ospf_route *er; |
| struct listnode *pnode, *pnnode; |
| struct ospf_path *path; |
| |
| vty_out (vty, "============ OSPF external routing table ===========%s", |
| VTY_NEWLINE); |
| for (rn = route_top (rt); rn; rn = route_next (rn)) |
| if ((er = rn->info) != NULL) |
| { |
| char buf1[19]; |
| snprintf (buf1, 19, "%s/%d", |
| inet_ntoa (rn->p.u.prefix4), rn->p.prefixlen); |
| |
| switch (er->path_type) |
| { |
| case OSPF_PATH_TYPE1_EXTERNAL: |
| vty_out (vty, "N E1 %-18s [%d] tag: %u%s", buf1, |
| er->cost, er->u.ext.tag, VTY_NEWLINE); |
| break; |
| case OSPF_PATH_TYPE2_EXTERNAL: |
| vty_out (vty, "N E2 %-18s [%d/%d] tag: %u%s", buf1, er->cost, |
| er->u.ext.type2_cost, er->u.ext.tag, VTY_NEWLINE); |
| break; |
| } |
| |
| for (ALL_LIST_ELEMENTS (er->paths, pnode, pnnode, path)) |
| { |
| if (if_lookup_by_index(path->ifindex)) |
| { |
| if (path->nexthop.s_addr == 0) |
| vty_out (vty, "%24s directly attached to %s%s", |
| "", ifindex2ifname (path->ifindex), VTY_NEWLINE); |
| else |
| vty_out (vty, "%24s via %s, %s%s", "", |
| inet_ntoa (path->nexthop), |
| ifindex2ifname (path->ifindex), |
| VTY_NEWLINE); |
| } |
| } |
| } |
| vty_out (vty, "%s", VTY_NEWLINE); |
| } |
| |
| DEFUN (show_ip_ospf_border_routers, |
| show_ip_ospf_border_routers_cmd, |
| "show ip ospf border-routers", |
| SHOW_STR |
| IP_STR |
| "show all the ABR's and ASBR's\n" |
| "for this area\n") |
| { |
| struct ospf *ospf; |
| |
| if ((ospf = ospf_lookup ()) == NULL) |
| { |
| vty_out (vty, " OSPF Routing Process not enabled%s", VTY_NEWLINE); |
| return CMD_SUCCESS; |
| } |
| |
| if (ospf->new_table == NULL) |
| { |
| vty_out (vty, "No OSPF routing information exist%s", VTY_NEWLINE); |
| return CMD_SUCCESS; |
| } |
| |
| /* Show Network routes. |
| show_ip_ospf_route_network (vty, ospf->new_table); */ |
| |
| /* Show Router routes. */ |
| show_ip_ospf_route_router (vty, ospf->new_rtrs); |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN (show_ip_ospf_route, |
| show_ip_ospf_route_cmd, |
| "show ip ospf route", |
| SHOW_STR |
| IP_STR |
| "OSPF information\n" |
| "OSPF routing table\n") |
| { |
| struct ospf *ospf; |
| |
| if ((ospf = ospf_lookup ()) == NULL) |
| { |
| vty_out (vty, " OSPF Routing Process not enabled%s", VTY_NEWLINE); |
| return CMD_SUCCESS; |
| } |
| |
| if (ospf->new_table == NULL) |
| { |
| vty_out (vty, "No OSPF routing information exist%s", VTY_NEWLINE); |
| return CMD_SUCCESS; |
| } |
| |
| /* Show Network routes. */ |
| show_ip_ospf_route_network (vty, ospf->new_table); |
| |
| /* Show Router routes. */ |
| show_ip_ospf_route_router (vty, ospf->new_rtrs); |
| |
| /* Show AS External routes. */ |
| show_ip_ospf_route_external (vty, ospf->old_external_route); |
| |
| return CMD_SUCCESS; |
| } |
| |
| |
| const char *ospf_abr_type_str[] = |
| { |
| "unknown", |
| "standard", |
| "ibm", |
| "cisco", |
| "shortcut" |
| }; |
| |
| const char *ospf_shortcut_mode_str[] = |
| { |
| "default", |
| "enable", |
| "disable" |
| }; |
| |
| |
| static void |
| area_id2str (char *buf, int length, struct ospf_area *area) |
| { |
| memset (buf, 0, length); |
| |
| if (area->format == OSPF_AREA_ID_FORMAT_ADDRESS) |
| strncpy (buf, inet_ntoa (area->area_id), length); |
| else |
| sprintf (buf, "%lu", (unsigned long) ntohl (area->area_id.s_addr)); |
| } |
| |
| |
| const char *ospf_int_type_str[] = |
| { |
| "unknown", /* should never be used. */ |
| "point-to-point", |
| "broadcast", |
| "non-broadcast", |
| "point-to-multipoint", |
| "virtual-link", /* should never be used. */ |
| "loopback" |
| }; |
| |
| /* Configuration write function for ospfd. */ |
| static int |
| config_write_interface (struct vty *vty) |
| { |
| struct listnode *n1, *n2; |
| struct interface *ifp; |
| struct crypt_key *ck; |
| int write = 0; |
| struct route_node *rn = NULL; |
| struct ospf_if_params *params; |
| |
| for (ALL_LIST_ELEMENTS_RO (iflist, n1, ifp)) |
| { |
| if (memcmp (ifp->name, "VLINK", 5) == 0) |
| continue; |
| |
| vty_out (vty, "!%s", VTY_NEWLINE); |
| vty_out (vty, "interface %s%s", ifp->name, |
| VTY_NEWLINE); |
| if (ifp->desc) |
| vty_out (vty, " description %s%s", ifp->desc, |
| VTY_NEWLINE); |
| |
| write++; |
| |
| params = IF_DEF_PARAMS (ifp); |
| |
| do { |
| /* Interface Network print. */ |
| if (OSPF_IF_PARAM_CONFIGURED (params, type) && |
| params->type != OSPF_IFTYPE_LOOPBACK) |
| { |
| if (params->type != ospf_default_iftype(ifp)) |
| { |
| vty_out (vty, " ip ospf network %s", |
| ospf_int_type_str[params->type]); |
| if (params != IF_DEF_PARAMS (ifp)) |
| vty_out (vty, " %s", inet_ntoa (rn->p.u.prefix4)); |
| vty_out (vty, "%s", VTY_NEWLINE); |
| } |
| } |
| |
| /* OSPF interface authentication print */ |
| if (OSPF_IF_PARAM_CONFIGURED (params, auth_type) && |
| params->auth_type != OSPF_AUTH_NOTSET) |
| { |
| const char *auth_str; |
| |
| /* Translation tables are not that much help here due to syntax |
| of the simple option */ |
| switch (params->auth_type) |
| { |
| |
| case OSPF_AUTH_NULL: |
| auth_str = " null"; |
| break; |
| |
| case OSPF_AUTH_SIMPLE: |
| auth_str = ""; |
| break; |
| |
| case OSPF_AUTH_CRYPTOGRAPHIC: |
| auth_str = " message-digest"; |
| break; |
| |
| default: |
| auth_str = ""; |
| break; |
| } |
| |
| vty_out (vty, " ip ospf authentication%s", auth_str); |
| if (params != IF_DEF_PARAMS (ifp)) |
| vty_out (vty, " %s", inet_ntoa (rn->p.u.prefix4)); |
| vty_out (vty, "%s", VTY_NEWLINE); |
| } |
| |
| /* Simple Authentication Password print. */ |
| if (OSPF_IF_PARAM_CONFIGURED (params, auth_simple) && |
| params->auth_simple[0] != '\0') |
| { |
| vty_out (vty, " ip ospf authentication-key %s", |
| params->auth_simple); |
| if (params != IF_DEF_PARAMS (ifp)) |
| vty_out (vty, " %s", inet_ntoa (rn->p.u.prefix4)); |
| vty_out (vty, "%s", VTY_NEWLINE); |
| } |
| |
| /* Cryptographic Authentication Key print. */ |
| for (ALL_LIST_ELEMENTS_RO (params->auth_crypt, n2, ck)) |
| { |
| vty_out (vty, " ip ospf message-digest-key %d md5 %s", |
| ck->key_id, ck->auth_key); |
| if (params != IF_DEF_PARAMS (ifp)) |
| vty_out (vty, " %s", inet_ntoa (rn->p.u.prefix4)); |
| vty_out (vty, "%s", VTY_NEWLINE); |
| } |
| |
| /* Interface Output Cost print. */ |
| if (OSPF_IF_PARAM_CONFIGURED (params, output_cost_cmd)) |
| { |
| vty_out (vty, " ip ospf cost %u", params->output_cost_cmd); |
| if (params != IF_DEF_PARAMS (ifp)) |
| vty_out (vty, " %s", inet_ntoa (rn->p.u.prefix4)); |
| vty_out (vty, "%s", VTY_NEWLINE); |
| } |
| |
| /* Hello Interval print. */ |
| if (OSPF_IF_PARAM_CONFIGURED (params, v_hello) && |
| params->v_hello != OSPF_HELLO_INTERVAL_DEFAULT) |
| { |
| vty_out (vty, " ip ospf hello-interval %u", params->v_hello); |
| if (params != IF_DEF_PARAMS (ifp)) |
| vty_out (vty, " %s", inet_ntoa (rn->p.u.prefix4)); |
| vty_out (vty, "%s", VTY_NEWLINE); |
| } |
| |
| |
| /* Router Dead Interval print. */ |
| if (OSPF_IF_PARAM_CONFIGURED (params, v_wait) && |
| params->v_wait != OSPF_ROUTER_DEAD_INTERVAL_DEFAULT) |
| { |
| vty_out (vty, " ip ospf dead-interval "); |
| |
| /* fast hello ? */ |
| if (OSPF_IF_PARAM_CONFIGURED (params, fast_hello)) |
| vty_out (vty, "minimal hello-multiplier %d", |
| params->fast_hello); |
| else |
| vty_out (vty, "%u", params->v_wait); |
| |
| if (params != IF_DEF_PARAMS (ifp)) |
| vty_out (vty, " %s", inet_ntoa (rn->p.u.prefix4)); |
| vty_out (vty, "%s", VTY_NEWLINE); |
| } |
| |
| /* Router Priority print. */ |
| if (OSPF_IF_PARAM_CONFIGURED (params, priority) && |
| params->priority != OSPF_ROUTER_PRIORITY_DEFAULT) |
| { |
| vty_out (vty, " ip ospf priority %u", params->priority); |
| if (params != IF_DEF_PARAMS (ifp)) |
| vty_out (vty, " %s", inet_ntoa (rn->p.u.prefix4)); |
| vty_out (vty, "%s", VTY_NEWLINE); |
| } |
| |
| /* Retransmit Interval print. */ |
| if (OSPF_IF_PARAM_CONFIGURED (params, retransmit_interval) && |
| params->retransmit_interval != OSPF_RETRANSMIT_INTERVAL_DEFAULT) |
| { |
| vty_out (vty, " ip ospf retransmit-interval %u", |
| params->retransmit_interval); |
| if (params != IF_DEF_PARAMS (ifp)) |
| vty_out (vty, " %s", inet_ntoa (rn->p.u.prefix4)); |
| vty_out (vty, "%s", VTY_NEWLINE); |
| } |
| |
| /* Transmit Delay print. */ |
| if (OSPF_IF_PARAM_CONFIGURED (params, transmit_delay) && |
| params->transmit_delay != OSPF_TRANSMIT_DELAY_DEFAULT) |
| { |
| vty_out (vty, " ip ospf transmit-delay %u", params->transmit_delay); |
| if (params != IF_DEF_PARAMS (ifp)) |
| vty_out (vty, " %s", inet_ntoa (rn->p.u.prefix4)); |
| vty_out (vty, "%s", VTY_NEWLINE); |
| } |
| |
| /* MTU ignore print. */ |
| if (OSPF_IF_PARAM_CONFIGURED (params, mtu_ignore) && |
| params->mtu_ignore != OSPF_MTU_IGNORE_DEFAULT) |
| { |
| if (params->mtu_ignore == 0) |
| vty_out (vty, " no ip ospf mtu-ignore"); |
| else |
| vty_out (vty, " ip ospf mtu-ignore"); |
| if (params != IF_DEF_PARAMS (ifp)) |
| vty_out (vty, " %s", inet_ntoa (rn->p.u.prefix4)); |
| vty_out (vty, "%s", VTY_NEWLINE); |
| } |
| |
| |
| while (1) |
| { |
| if (rn == NULL) |
| rn = route_top (IF_OIFS_PARAMS (ifp)); |
| else |
| rn = route_next (rn); |
| |
| if (rn == NULL) |
| break; |
| params = rn->info; |
| if (params != NULL) |
| break; |
| } |
| } while (rn); |
| |
| #ifdef HAVE_OPAQUE_LSA |
| ospf_opaque_config_write_if (vty, ifp); |
| #endif /* HAVE_OPAQUE_LSA */ |
| } |
| |
| return write; |
| } |
| |
| static int |
| config_write_network_area (struct vty *vty, struct ospf *ospf) |
| { |
| struct route_node *rn; |
| u_char buf[INET_ADDRSTRLEN]; |
| |
| /* `network area' print. */ |
| for (rn = route_top (ospf->networks); rn; rn = route_next (rn)) |
| if (rn->info) |
| { |
| struct ospf_network *n = rn->info; |
| |
| memset (buf, 0, INET_ADDRSTRLEN); |
| |
| /* Create Area ID string by specified Area ID format. */ |
| if (n->format == OSPF_AREA_ID_FORMAT_ADDRESS) |
| strncpy ((char *) buf, inet_ntoa (n->area_id), INET_ADDRSTRLEN); |
| else |
| sprintf ((char *) buf, "%lu", |
| (unsigned long int) ntohl (n->area_id.s_addr)); |
| |
| /* Network print. */ |
| vty_out (vty, " network %s/%d area %s%s", |
| inet_ntoa (rn->p.u.prefix4), rn->p.prefixlen, |
| buf, VTY_NEWLINE); |
| } |
| |
| return 0; |
| } |
| |
| static int |
| config_write_ospf_area (struct vty *vty, struct ospf *ospf) |
| { |
| struct listnode *node; |
| struct ospf_area *area; |
| u_char buf[INET_ADDRSTRLEN]; |
| |
| /* Area configuration print. */ |
| for (ALL_LIST_ELEMENTS_RO (ospf->areas, node, area)) |
| { |
| struct route_node *rn1; |
| |
| area_id2str ((char *) buf, INET_ADDRSTRLEN, area); |
| |
| if (area->auth_type != OSPF_AUTH_NULL) |
| { |
| if (area->auth_type == OSPF_AUTH_SIMPLE) |
| vty_out (vty, " area %s authentication%s", buf, VTY_NEWLINE); |
| else |
| vty_out (vty, " area %s authentication message-digest%s", |
| buf, VTY_NEWLINE); |
| } |
| |
| if (area->shortcut_configured != OSPF_SHORTCUT_DEFAULT) |
| vty_out (vty, " area %s shortcut %s%s", buf, |
| ospf_shortcut_mode_str[area->shortcut_configured], |
| VTY_NEWLINE); |
| |
| if ((area->external_routing == OSPF_AREA_STUB) |
| || (area->external_routing == OSPF_AREA_NSSA) |
| ) |
| { |
| if (area->external_routing == OSPF_AREA_STUB) |
| vty_out (vty, " area %s stub", buf); |
| else if (area->external_routing == OSPF_AREA_NSSA) |
| { |
| vty_out (vty, " area %s nssa", buf); |
| switch (area->NSSATranslatorRole) |
| { |
| case OSPF_NSSA_ROLE_NEVER: |
| vty_out (vty, " translate-never"); |
| break; |
| case OSPF_NSSA_ROLE_ALWAYS: |
| vty_out (vty, " translate-always"); |
| break; |
| case OSPF_NSSA_ROLE_CANDIDATE: |
| default: |
| vty_out (vty, " translate-candidate"); |
| } |
| } |
| |
| if (area->no_summary) |
| vty_out (vty, " no-summary"); |
| |
| vty_out (vty, "%s", VTY_NEWLINE); |
| |
| if (area->default_cost != 1) |
| vty_out (vty, " area %s default-cost %d%s", buf, |
| area->default_cost, VTY_NEWLINE); |
| } |
| |
| for (rn1 = route_top (area->ranges); rn1; rn1 = route_next (rn1)) |
| if (rn1->info) |
| { |
| struct ospf_area_range *range = rn1->info; |
| |
| vty_out (vty, " area %s range %s/%d", buf, |
| inet_ntoa (rn1->p.u.prefix4), rn1->p.prefixlen); |
| |
| if (range->cost_config != OSPF_AREA_RANGE_COST_UNSPEC) |
| vty_out (vty, " cost %d", range->cost_config); |
| |
| if (!CHECK_FLAG (range->flags, OSPF_AREA_RANGE_ADVERTISE)) |
| vty_out (vty, " not-advertise"); |
| |
| if (CHECK_FLAG (range->flags, OSPF_AREA_RANGE_SUBSTITUTE)) |
| vty_out (vty, " substitute %s/%d", |
| inet_ntoa (range->subst_addr), range->subst_masklen); |
| |
| vty_out (vty, "%s", VTY_NEWLINE); |
| } |
| |
| if (EXPORT_NAME (area)) |
| vty_out (vty, " area %s export-list %s%s", buf, |
| EXPORT_NAME (area), VTY_NEWLINE); |
| |
| if (IMPORT_NAME (area)) |
| vty_out (vty, " area %s import-list %s%s", buf, |
| IMPORT_NAME (area), VTY_NEWLINE); |
| |
| if (PREFIX_NAME_IN (area)) |
| vty_out (vty, " area %s filter-list prefix %s in%s", buf, |
| PREFIX_NAME_IN (area), VTY_NEWLINE); |
| |
| if (PREFIX_NAME_OUT (area)) |
| vty_out (vty, " area %s filter-list prefix %s out%s", buf, |
| PREFIX_NAME_OUT (area), VTY_NEWLINE); |
| } |
| |
| return 0; |
| } |
| |
| static int |
| config_write_ospf_nbr_nbma (struct vty *vty, struct ospf *ospf) |
| { |
| struct ospf_nbr_nbma *nbr_nbma; |
| struct route_node *rn; |
| |
| /* Static Neighbor configuration print. */ |
| for (rn = route_top (ospf->nbr_nbma); rn; rn = route_next (rn)) |
| if ((nbr_nbma = rn->info)) |
| { |
| vty_out (vty, " neighbor %s", inet_ntoa (nbr_nbma->addr)); |
| |
| if (nbr_nbma->priority != OSPF_NEIGHBOR_PRIORITY_DEFAULT) |
| vty_out (vty, " priority %d", nbr_nbma->priority); |
| |
| if (nbr_nbma->v_poll != OSPF_POLL_INTERVAL_DEFAULT) |
| vty_out (vty, " poll-interval %d", nbr_nbma->v_poll); |
| |
| vty_out (vty, "%s", VTY_NEWLINE); |
| } |
| |
| return 0; |
| } |
| |
| static int |
| config_write_virtual_link (struct vty *vty, struct ospf *ospf) |
| { |
| struct listnode *node; |
| struct ospf_vl_data *vl_data; |
| u_char buf[INET_ADDRSTRLEN]; |
| |
| /* Virtual-Link print */ |
| for (ALL_LIST_ELEMENTS_RO (ospf->vlinks, node, vl_data)) |
| { |
| struct listnode *n2; |
| struct crypt_key *ck; |
| struct ospf_interface *oi; |
| |
| if (vl_data != NULL) |
| { |
| memset (buf, 0, INET_ADDRSTRLEN); |
| |
| if (vl_data->format == OSPF_AREA_ID_FORMAT_ADDRESS) |
| strncpy ((char *) buf, inet_ntoa (vl_data->vl_area_id), INET_ADDRSTRLEN); |
| else |
| sprintf ((char *) buf, "%lu", |
| (unsigned long int) ntohl (vl_data->vl_area_id.s_addr)); |
| oi = vl_data->vl_oi; |
| |
| /* timers */ |
| if (OSPF_IF_PARAM (oi, v_hello) != OSPF_HELLO_INTERVAL_DEFAULT || |
| OSPF_IF_PARAM (oi, v_wait) != OSPF_ROUTER_DEAD_INTERVAL_DEFAULT || |
| OSPF_IF_PARAM (oi, retransmit_interval) != OSPF_RETRANSMIT_INTERVAL_DEFAULT || |
| OSPF_IF_PARAM (oi, transmit_delay) != OSPF_TRANSMIT_DELAY_DEFAULT) |
| vty_out (vty, " area %s virtual-link %s hello-interval %d retransmit-interval %d transmit-delay %d dead-interval %d%s", |
| buf, |
| inet_ntoa (vl_data->vl_peer), |
| OSPF_IF_PARAM (oi, v_hello), |
| OSPF_IF_PARAM (oi, retransmit_interval), |
| OSPF_IF_PARAM (oi, transmit_delay), |
| OSPF_IF_PARAM (oi, v_wait), |
| VTY_NEWLINE); |
| else |
| vty_out (vty, " area %s virtual-link %s%s", buf, |
| inet_ntoa (vl_data->vl_peer), VTY_NEWLINE); |
| /* Auth key */ |
| if (IF_DEF_PARAMS (vl_data->vl_oi->ifp)->auth_simple[0] != '\0') |
| vty_out (vty, " area %s virtual-link %s authentication-key %s%s", |
| buf, |
| inet_ntoa (vl_data->vl_peer), |
| IF_DEF_PARAMS (vl_data->vl_oi->ifp)->auth_simple, |
| VTY_NEWLINE); |
| /* md5 keys */ |
| for (ALL_LIST_ELEMENTS_RO (IF_DEF_PARAMS (vl_data->vl_oi->ifp)->auth_crypt, |
| n2, ck)) |
| vty_out (vty, " area %s virtual-link %s" |
| " message-digest-key %d md5 %s%s", |
| buf, |
| inet_ntoa (vl_data->vl_peer), |
| ck->key_id, ck->auth_key, VTY_NEWLINE); |
| |
| } |
| } |
| |
| return 0; |
| } |
| |
| |
| static int |
| config_write_ospf_redistribute (struct vty *vty, struct ospf *ospf) |
| { |
| int type; |
| |
| /* redistribute print. */ |
| for (type = 0; type < ZEBRA_ROUTE_MAX; type++) |
| if (type != zclient->redist_default && zclient->redist[type]) |
| { |
| vty_out (vty, " redistribute %s", zebra_route_string(type)); |
| if (ospf->dmetric[type].value >= 0) |
| vty_out (vty, " metric %d", ospf->dmetric[type].value); |
| |
| if (ospf->dmetric[type].type == EXTERNAL_METRIC_TYPE_1) |
| vty_out (vty, " metric-type 1"); |
| |
| if (ROUTEMAP_NAME (ospf, type)) |
| vty_out (vty, " route-map %s", ROUTEMAP_NAME (ospf, type)); |
| |
| vty_out (vty, "%s", VTY_NEWLINE); |
| } |
| |
| return 0; |
| } |
| |
| static int |
| config_write_ospf_default_metric (struct vty *vty, struct ospf *ospf) |
| { |
| if (ospf->default_metric != -1) |
| vty_out (vty, " default-metric %d%s", ospf->default_metric, |
| VTY_NEWLINE); |
| return 0; |
| } |
| |
| static int |
| config_write_ospf_distribute (struct vty *vty, struct ospf *ospf) |
| { |
| int type; |
| |
| if (ospf) |
| { |
| /* distribute-list print. */ |
| for (type = 0; type < ZEBRA_ROUTE_MAX; type++) |
| if (DISTRIBUTE_NAME (ospf, type)) |
| vty_out (vty, " distribute-list %s out %s%s", |
| DISTRIBUTE_NAME (ospf, type), |
| zebra_route_string(type), VTY_NEWLINE); |
| |
| /* default-information print. */ |
| if (ospf->default_originate != DEFAULT_ORIGINATE_NONE) |
| { |
| vty_out (vty, " default-information originate"); |
| if (ospf->default_originate == DEFAULT_ORIGINATE_ALWAYS) |
| vty_out (vty, " always"); |
| |
| if (ospf->dmetric[DEFAULT_ROUTE].value >= 0) |
| vty_out (vty, " metric %d", |
| ospf->dmetric[DEFAULT_ROUTE].value); |
| if (ospf->dmetric[DEFAULT_ROUTE].type == EXTERNAL_METRIC_TYPE_1) |
| vty_out (vty, " metric-type 1"); |
| |
| if (ROUTEMAP_NAME (ospf, DEFAULT_ROUTE)) |
| vty_out (vty, " route-map %s", |
| ROUTEMAP_NAME (ospf, DEFAULT_ROUTE)); |
| |
| vty_out (vty, "%s", VTY_NEWLINE); |
| } |
| |
| } |
| |
| return 0; |
| } |
| |
| static int |
| config_write_ospf_distance (struct vty *vty, struct ospf *ospf) |
| { |
| struct route_node *rn; |
| struct ospf_distance *odistance; |
| |
| if (ospf->distance_all) |
| vty_out (vty, " distance %d%s", ospf->distance_all, VTY_NEWLINE); |
| |
| if (ospf->distance_intra |
| || ospf->distance_inter |
| || ospf->distance_external) |
| { |
| vty_out (vty, " distance ospf"); |
| |
| if (ospf->distance_intra) |
| vty_out (vty, " intra-area %d", ospf->distance_intra); |
| if (ospf->distance_inter) |
| vty_out (vty, " inter-area %d", ospf->distance_inter); |
| if (ospf->distance_external) |
| vty_out (vty, " external %d", ospf->distance_external); |
| |
| vty_out (vty, "%s", VTY_NEWLINE); |
| } |
| |
| for (rn = route_top (ospf->distance_table); rn; rn = route_next (rn)) |
| if ((odistance = rn->info) != NULL) |
| { |
| vty_out (vty, " distance %d %s/%d %s%s", odistance->distance, |
| inet_ntoa (rn->p.u.prefix4), rn->p.prefixlen, |
| odistance->access_list ? odistance->access_list : "", |
| VTY_NEWLINE); |
| } |
| return 0; |
| } |
| |
| /* OSPF configuration write function. */ |
| static int |
| ospf_config_write (struct vty *vty) |
| { |
| struct ospf *ospf; |
| struct interface *ifp; |
| struct ospf_interface *oi; |
| struct listnode *node; |
| int write = 0; |
| |
| ospf = ospf_lookup (); |
| if (ospf != NULL) |
| { |
| /* `router ospf' print. */ |
| vty_out (vty, "router ospf%s", VTY_NEWLINE); |
| |
| write++; |
| |
| if (!ospf->networks) |
| return write; |
| |
| /* Router ID print. */ |
| if (ospf->router_id_static.s_addr != 0) |
| vty_out (vty, " ospf router-id %s%s", |
| inet_ntoa (ospf->router_id_static), VTY_NEWLINE); |
| |
| /* ABR type print. */ |
| if (ospf->abr_type != OSPF_ABR_DEFAULT) |
| vty_out (vty, " ospf abr-type %s%s", |
| ospf_abr_type_str[ospf->abr_type], VTY_NEWLINE); |
| |
| /* log-adjacency-changes flag print. */ |
| if (CHECK_FLAG(ospf->config, OSPF_LOG_ADJACENCY_CHANGES)) |
| { |
| vty_out(vty, " log-adjacency-changes"); |
| if (CHECK_FLAG(ospf->config, OSPF_LOG_ADJACENCY_DETAIL)) |
| vty_out(vty, " detail"); |
| vty_out(vty, "%s", VTY_NEWLINE); |
| } |
| |
| /* RFC1583 compatibility flag print -- Compatible with CISCO 12.1. */ |
| if (CHECK_FLAG (ospf->config, OSPF_RFC1583_COMPATIBLE)) |
| vty_out (vty, " compatible rfc1583%s", VTY_NEWLINE); |
| |
| /* auto-cost reference-bandwidth configuration. */ |
| if (ospf->ref_bandwidth != OSPF_DEFAULT_REF_BANDWIDTH) |
| { |
| vty_out (vty, "! Important: ensure reference bandwidth " |
| "is consistent across all routers%s", VTY_NEWLINE); |
| vty_out (vty, " auto-cost reference-bandwidth %d%s", |
| ospf->ref_bandwidth / 1000, VTY_NEWLINE); |
| } |
| |
| /* SPF timers print. */ |
| if (ospf->spf_delay != OSPF_SPF_DELAY_DEFAULT || |
| ospf->spf_holdtime != OSPF_SPF_HOLDTIME_DEFAULT || |
| ospf->spf_max_holdtime != OSPF_SPF_MAX_HOLDTIME_DEFAULT) |
| vty_out (vty, " timers throttle spf %d %d %d%s", |
| ospf->spf_delay, ospf->spf_holdtime, |
| ospf->spf_max_holdtime, VTY_NEWLINE); |
| |
| /* Max-metric router-lsa print */ |
| config_write_stub_router (vty, ospf); |
| |
| /* SPF refresh parameters print. */ |
| if (ospf->lsa_refresh_interval != OSPF_LSA_REFRESH_INTERVAL_DEFAULT) |
| vty_out (vty, " refresh timer %d%s", |
| ospf->lsa_refresh_interval, VTY_NEWLINE); |
| |
| /* Redistribute information print. */ |
| config_write_ospf_redistribute (vty, ospf); |
| |
| /* passive-interface print. */ |
| if (ospf->passive_interface_default == OSPF_IF_PASSIVE) |
| vty_out (vty, " passive-interface default%s", VTY_NEWLINE); |
| |
| for (ALL_LIST_ELEMENTS_RO (om->iflist, node, ifp)) |
| if (OSPF_IF_PARAM_CONFIGURED (IF_DEF_PARAMS (ifp), passive_interface) |
| && IF_DEF_PARAMS (ifp)->passive_interface != |
| ospf->passive_interface_default) |
| { |
| vty_out (vty, " %spassive-interface %s%s", |
| IF_DEF_PARAMS (ifp)->passive_interface ? "" : "no ", |
| ifp->name, VTY_NEWLINE); |
| } |
| for (ALL_LIST_ELEMENTS_RO (ospf->oiflist, node, oi)) |
| { |
| if (!OSPF_IF_PARAM_CONFIGURED (oi->params, passive_interface)) |
| continue; |
| if (OSPF_IF_PARAM_CONFIGURED (IF_DEF_PARAMS (oi->ifp), |
| passive_interface)) |
| { |
| if (oi->params->passive_interface == IF_DEF_PARAMS (oi->ifp)->passive_interface) |
| continue; |
| } |
| else if (oi->params->passive_interface == ospf->passive_interface_default) |
| continue; |
| |
| vty_out (vty, " %spassive-interface %s %s%s", |
| oi->params->passive_interface ? "" : "no ", |
| oi->ifp->name, |
| inet_ntoa (oi->address->u.prefix4), VTY_NEWLINE); |
| } |
| |
| /* Network area print. */ |
| config_write_network_area (vty, ospf); |
| |
| /* Area config print. */ |
| config_write_ospf_area (vty, ospf); |
| |
| /* static neighbor print. */ |
| config_write_ospf_nbr_nbma (vty, ospf); |
| |
| /* Virtual-Link print. */ |
| config_write_virtual_link (vty, ospf); |
| |
| /* Default metric configuration. */ |
| config_write_ospf_default_metric (vty, ospf); |
| |
| /* Distribute-list and default-information print. */ |
| config_write_ospf_distribute (vty, ospf); |
| |
| /* Distance configuration. */ |
| config_write_ospf_distance (vty, ospf); |
| |
| #ifdef HAVE_OPAQUE_LSA |
| ospf_opaque_config_write_router (vty, ospf); |
| #endif /* HAVE_OPAQUE_LSA */ |
| } |
| |
| return write; |
| } |
| |
| void |
| ospf_vty_show_init (void) |
| { |
| /* "show ip ospf" commands. */ |
| install_element (VIEW_NODE, &show_ip_ospf_cmd); |
| install_element (ENABLE_NODE, &show_ip_ospf_cmd); |
| |
| /* "show ip ospf database" commands. */ |
| install_element (VIEW_NODE, &show_ip_ospf_database_type_cmd); |
| install_element (VIEW_NODE, &show_ip_ospf_database_type_id_cmd); |
| install_element (VIEW_NODE, &show_ip_ospf_database_type_id_adv_router_cmd); |
| install_element (VIEW_NODE, &show_ip_ospf_database_type_adv_router_cmd); |
| install_element (VIEW_NODE, &show_ip_ospf_database_type_id_self_cmd); |
| install_element (VIEW_NODE, &show_ip_ospf_database_type_self_cmd); |
| install_element (VIEW_NODE, &show_ip_ospf_database_cmd); |
| install_element (ENABLE_NODE, &show_ip_ospf_database_type_cmd); |
| install_element (ENABLE_NODE, &show_ip_ospf_database_type_id_cmd); |
| install_element (ENABLE_NODE, &show_ip_ospf_database_type_id_adv_router_cmd); |
| install_element (ENABLE_NODE, &show_ip_ospf_database_type_adv_router_cmd); |
| install_element (ENABLE_NODE, &show_ip_ospf_database_type_id_self_cmd); |
| install_element (ENABLE_NODE, &show_ip_ospf_database_type_self_cmd); |
| install_element (ENABLE_NODE, &show_ip_ospf_database_cmd); |
| |
| /* "show ip ospf interface" commands. */ |
| install_element (VIEW_NODE, &show_ip_ospf_interface_cmd); |
| install_element (ENABLE_NODE, &show_ip_ospf_interface_cmd); |
| |
| /* "show ip ospf neighbor" commands. */ |
| install_element (VIEW_NODE, &show_ip_ospf_neighbor_int_detail_cmd); |
| install_element (VIEW_NODE, &show_ip_ospf_neighbor_int_cmd); |
| install_element (VIEW_NODE, &show_ip_ospf_neighbor_id_cmd); |
| install_element (VIEW_NODE, &show_ip_ospf_neighbor_detail_all_cmd); |
| install_element (VIEW_NODE, &show_ip_ospf_neighbor_detail_cmd); |
| install_element (VIEW_NODE, &show_ip_ospf_neighbor_cmd); |
| install_element (VIEW_NODE, &show_ip_ospf_neighbor_all_cmd); |
| install_element (ENABLE_NODE, &show_ip_ospf_neighbor_int_detail_cmd); |
| install_element (ENABLE_NODE, &show_ip_ospf_neighbor_int_cmd); |
| install_element (ENABLE_NODE, &show_ip_ospf_neighbor_id_cmd); |
| install_element (ENABLE_NODE, &show_ip_ospf_neighbor_detail_all_cmd); |
| install_element (ENABLE_NODE, &show_ip_ospf_neighbor_detail_cmd); |
| install_element (ENABLE_NODE, &show_ip_ospf_neighbor_cmd); |
| install_element (ENABLE_NODE, &show_ip_ospf_neighbor_all_cmd); |
| |
| /* "show ip ospf route" commands. */ |
| install_element (VIEW_NODE, &show_ip_ospf_route_cmd); |
| install_element (ENABLE_NODE, &show_ip_ospf_route_cmd); |
| install_element (VIEW_NODE, &show_ip_ospf_border_routers_cmd); |
| install_element (ENABLE_NODE, &show_ip_ospf_border_routers_cmd); |
| } |
| |
| |
| /* ospfd's interface node. */ |
| static struct cmd_node interface_node = |
| { |
| INTERFACE_NODE, |
| "%s(config-if)# ", |
| 1 |
| }; |
| |
| /* Initialization of OSPF interface. */ |
| static void |
| ospf_vty_if_init (void) |
| { |
| /* Install interface node. */ |
| install_node (&interface_node, config_write_interface); |
| |
| install_element (CONFIG_NODE, &interface_cmd); |
| install_element (CONFIG_NODE, &no_interface_cmd); |
| install_default (INTERFACE_NODE); |
| |
| /* "description" commands. */ |
| install_element (INTERFACE_NODE, &interface_desc_cmd); |
| install_element (INTERFACE_NODE, &no_interface_desc_cmd); |
| |
| /* "ip ospf authentication" commands. */ |
| install_element (INTERFACE_NODE, &ip_ospf_authentication_args_addr_cmd); |
| install_element (INTERFACE_NODE, &ip_ospf_authentication_args_cmd); |
| install_element (INTERFACE_NODE, &ip_ospf_authentication_addr_cmd); |
| install_element (INTERFACE_NODE, &ip_ospf_authentication_cmd); |
| install_element (INTERFACE_NODE, &no_ip_ospf_authentication_addr_cmd); |
| install_element (INTERFACE_NODE, &no_ip_ospf_authentication_cmd); |
| install_element (INTERFACE_NODE, &ip_ospf_authentication_key_addr_cmd); |
| install_element (INTERFACE_NODE, &ip_ospf_authentication_key_cmd); |
| install_element (INTERFACE_NODE, &no_ip_ospf_authentication_key_addr_cmd); |
| install_element (INTERFACE_NODE, &no_ip_ospf_authentication_key_cmd); |
| |
| /* "ip ospf message-digest-key" commands. */ |
| install_element (INTERFACE_NODE, &ip_ospf_message_digest_key_addr_cmd); |
| install_element (INTERFACE_NODE, &ip_ospf_message_digest_key_cmd); |
| install_element (INTERFACE_NODE, &no_ip_ospf_message_digest_key_addr_cmd); |
| install_element (INTERFACE_NODE, &no_ip_ospf_message_digest_key_cmd); |
| |
| /* "ip ospf cost" commands. */ |
| install_element (INTERFACE_NODE, &ip_ospf_cost_u32_inet4_cmd); |
| install_element (INTERFACE_NODE, &ip_ospf_cost_u32_cmd); |
| install_element (INTERFACE_NODE, &no_ip_ospf_cost_u32_cmd); |
| install_element (INTERFACE_NODE, &no_ip_ospf_cost_u32_inet4_cmd); |
| install_element (INTERFACE_NODE, &no_ip_ospf_cost_inet4_cmd); |
| install_element (INTERFACE_NODE, &no_ip_ospf_cost_cmd); |
| |
| /* "ip ospf mtu-ignore" commands. */ |
| install_element (INTERFACE_NODE, &ip_ospf_mtu_ignore_addr_cmd); |
| install_element (INTERFACE_NODE, &ip_ospf_mtu_ignore_cmd); |
| install_element (INTERFACE_NODE, &no_ip_ospf_mtu_ignore_addr_cmd); |
| install_element (INTERFACE_NODE, &no_ip_ospf_mtu_ignore_cmd); |
| |
| /* "ip ospf dead-interval" commands. */ |
| install_element (INTERFACE_NODE, &ip_ospf_dead_interval_addr_cmd); |
| install_element (INTERFACE_NODE, &ip_ospf_dead_interval_cmd); |
| install_element (INTERFACE_NODE, &ip_ospf_dead_interval_minimal_addr_cmd); |
| install_element (INTERFACE_NODE, &ip_ospf_dead_interval_minimal_cmd); |
| install_element (INTERFACE_NODE, &no_ip_ospf_dead_interval_addr_cmd); |
| install_element (INTERFACE_NODE, &no_ip_ospf_dead_interval_cmd); |
| |
| /* "ip ospf hello-interval" commands. */ |
| install_element (INTERFACE_NODE, &ip_ospf_hello_interval_addr_cmd); |
| install_element (INTERFACE_NODE, &ip_ospf_hello_interval_cmd); |
| install_element (INTERFACE_NODE, &no_ip_ospf_hello_interval_addr_cmd); |
| install_element (INTERFACE_NODE, &no_ip_ospf_hello_interval_cmd); |
| |
| /* "ip ospf network" commands. */ |
| install_element (INTERFACE_NODE, &ip_ospf_network_cmd); |
| install_element (INTERFACE_NODE, &no_ip_ospf_network_cmd); |
| |
| /* "ip ospf priority" commands. */ |
| install_element (INTERFACE_NODE, &ip_ospf_priority_addr_cmd); |
| install_element (INTERFACE_NODE, &ip_ospf_priority_cmd); |
| install_element (INTERFACE_NODE, &no_ip_ospf_priority_addr_cmd); |
| install_element (INTERFACE_NODE, &no_ip_ospf_priority_cmd); |
| |
| /* "ip ospf retransmit-interval" commands. */ |
| install_element (INTERFACE_NODE, &ip_ospf_retransmit_interval_addr_cmd); |
| install_element (INTERFACE_NODE, &ip_ospf_retransmit_interval_cmd); |
| install_element (INTERFACE_NODE, &no_ip_ospf_retransmit_interval_addr_cmd); |
| install_element (INTERFACE_NODE, &no_ip_ospf_retransmit_interval_cmd); |
| |
| /* "ip ospf transmit-delay" commands. */ |
| install_element (INTERFACE_NODE, &ip_ospf_transmit_delay_addr_cmd); |
| install_element (INTERFACE_NODE, &ip_ospf_transmit_delay_cmd); |
| install_element (INTERFACE_NODE, &no_ip_ospf_transmit_delay_addr_cmd); |
| install_element (INTERFACE_NODE, &no_ip_ospf_transmit_delay_cmd); |
| |
| /* These commands are compatibitliy for previous version. */ |
| install_element (INTERFACE_NODE, &ospf_authentication_key_cmd); |
| install_element (INTERFACE_NODE, &no_ospf_authentication_key_cmd); |
| install_element (INTERFACE_NODE, &ospf_message_digest_key_cmd); |
| install_element (INTERFACE_NODE, &no_ospf_message_digest_key_cmd); |
| install_element (INTERFACE_NODE, &ospf_cost_u32_cmd); |
| install_element (INTERFACE_NODE, &ospf_cost_u32_inet4_cmd); |
| install_element (INTERFACE_NODE, &no_ospf_cost_cmd); |
| install_element (INTERFACE_NODE, &no_ospf_cost_u32_cmd); |
| install_element (INTERFACE_NODE, &no_ospf_cost_u32_inet4_cmd); |
| install_element (INTERFACE_NODE, &no_ospf_cost_inet4_cmd); |
| install_element (INTERFACE_NODE, &ospf_dead_interval_cmd); |
| install_element (INTERFACE_NODE, &no_ospf_dead_interval_cmd); |
| install_element (INTERFACE_NODE, &ospf_hello_interval_cmd); |
| install_element (INTERFACE_NODE, &no_ospf_hello_interval_cmd); |
| install_element (INTERFACE_NODE, &ospf_network_cmd); |
| install_element (INTERFACE_NODE, &no_ospf_network_cmd); |
| install_element (INTERFACE_NODE, &ospf_priority_cmd); |
| install_element (INTERFACE_NODE, &no_ospf_priority_cmd); |
| install_element (INTERFACE_NODE, &ospf_retransmit_interval_cmd); |
| install_element (INTERFACE_NODE, &no_ospf_retransmit_interval_cmd); |
| install_element (INTERFACE_NODE, &ospf_transmit_delay_cmd); |
| install_element (INTERFACE_NODE, &no_ospf_transmit_delay_cmd); |
| } |
| |
| static void |
| ospf_vty_zebra_init (void) |
| { |
| install_element (OSPF_NODE, &ospf_redistribute_source_cmd); |
| install_element (OSPF_NODE, &no_ospf_redistribute_source_cmd); |
| |
| install_element (OSPF_NODE, &ospf_distribute_list_out_cmd); |
| install_element (OSPF_NODE, &no_ospf_distribute_list_out_cmd); |
| |
| install_element (OSPF_NODE, &ospf_default_information_originate_cmd); |
| install_element (OSPF_NODE, &no_ospf_default_information_originate_cmd); |
| |
| install_element (OSPF_NODE, &ospf_default_metric_cmd); |
| install_element (OSPF_NODE, &no_ospf_default_metric_cmd); |
| install_element (OSPF_NODE, &no_ospf_default_metric_val_cmd); |
| |
| install_element (OSPF_NODE, &ospf_distance_cmd); |
| install_element (OSPF_NODE, &no_ospf_distance_cmd); |
| install_element (OSPF_NODE, &no_ospf_distance_ospf_cmd); |
| install_element (OSPF_NODE, &ospf_distance_ospf_cmd); |
| #if 0 |
| install_element (OSPF_NODE, &ospf_distance_source_cmd); |
| install_element (OSPF_NODE, &no_ospf_distance_source_cmd); |
| install_element (OSPF_NODE, &ospf_distance_source_access_list_cmd); |
| install_element (OSPF_NODE, &no_ospf_distance_source_access_list_cmd); |
| #endif /* 0 */ |
| } |
| |
| static struct cmd_node ospf_node = |
| { |
| OSPF_NODE, |
| "%s(config-router)# ", |
| 1 |
| }; |
| |
| |
| /* Install OSPF related vty commands. */ |
| void |
| ospf_vty_init (void) |
| { |
| /* Install ospf top node. */ |
| install_node (&ospf_node, ospf_config_write); |
| |
| /* "router ospf" commands. */ |
| install_element (CONFIG_NODE, &router_ospf_cmd); |
| install_element (CONFIG_NODE, &no_router_ospf_cmd); |
| |
| install_default (OSPF_NODE); |
| |
| /* "ospf router-id" commands. */ |
| install_element (OSPF_NODE, &ospf_router_id_cmd); |
| install_element (OSPF_NODE, &no_ospf_router_id_cmd); |
| install_element (OSPF_NODE, &router_ospf_id_cmd); |
| install_element (OSPF_NODE, &no_router_ospf_id_cmd); |
| |
| /* "passive-interface" commands. */ |
| install_element (OSPF_NODE, &ospf_passive_interface_addr_cmd); |
| install_element (OSPF_NODE, &ospf_passive_interface_cmd); |
| install_element (OSPF_NODE, &ospf_passive_interface_default_cmd); |
| install_element (OSPF_NODE, &no_ospf_passive_interface_addr_cmd); |
| install_element (OSPF_NODE, &no_ospf_passive_interface_cmd); |
| install_element (OSPF_NODE, &no_ospf_passive_interface_default_cmd); |
| |
| /* "ospf abr-type" commands. */ |
| install_element (OSPF_NODE, &ospf_abr_type_cmd); |
| install_element (OSPF_NODE, &no_ospf_abr_type_cmd); |
| |
| /* "ospf log-adjacency-changes" commands. */ |
| install_element (OSPF_NODE, &ospf_log_adjacency_changes_cmd); |
| install_element (OSPF_NODE, &ospf_log_adjacency_changes_detail_cmd); |
| install_element (OSPF_NODE, &no_ospf_log_adjacency_changes_cmd); |
| install_element (OSPF_NODE, &no_ospf_log_adjacency_changes_detail_cmd); |
| |
| /* "ospf rfc1583-compatible" commands. */ |
| install_element (OSPF_NODE, &ospf_rfc1583_flag_cmd); |
| install_element (OSPF_NODE, &no_ospf_rfc1583_flag_cmd); |
| install_element (OSPF_NODE, &ospf_compatible_rfc1583_cmd); |
| install_element (OSPF_NODE, &no_ospf_compatible_rfc1583_cmd); |
| |
| /* "network area" commands. */ |
| install_element (OSPF_NODE, &ospf_network_area_cmd); |
| install_element (OSPF_NODE, &no_ospf_network_area_cmd); |
| |
| /* "area authentication" commands. */ |
| install_element (OSPF_NODE, &ospf_area_authentication_message_digest_cmd); |
| install_element (OSPF_NODE, &ospf_area_authentication_cmd); |
| install_element (OSPF_NODE, &no_ospf_area_authentication_cmd); |
| |
| /* "area range" commands. */ |
| install_element (OSPF_NODE, &ospf_area_range_cmd); |
| install_element (OSPF_NODE, &ospf_area_range_advertise_cmd); |
| install_element (OSPF_NODE, &ospf_area_range_cost_cmd); |
| install_element (OSPF_NODE, &ospf_area_range_advertise_cost_cmd); |
| install_element (OSPF_NODE, &ospf_area_range_not_advertise_cmd); |
| install_element (OSPF_NODE, &no_ospf_area_range_cmd); |
| install_element (OSPF_NODE, &no_ospf_area_range_advertise_cmd); |
| install_element (OSPF_NODE, &no_ospf_area_range_cost_cmd); |
| install_element (OSPF_NODE, &no_ospf_area_range_advertise_cost_cmd); |
| install_element (OSPF_NODE, &ospf_area_range_substitute_cmd); |
| install_element (OSPF_NODE, &no_ospf_area_range_substitute_cmd); |
| |
| /* "area virtual-link" commands. */ |
| install_element (OSPF_NODE, &ospf_area_vlink_cmd); |
| install_element (OSPF_NODE, &no_ospf_area_vlink_cmd); |
| |
| install_element (OSPF_NODE, &ospf_area_vlink_param1_cmd); |
| install_element (OSPF_NODE, &no_ospf_area_vlink_param1_cmd); |
| |
| install_element (OSPF_NODE, &ospf_area_vlink_param2_cmd); |
| install_element (OSPF_NODE, &no_ospf_area_vlink_param2_cmd); |
| |
| install_element (OSPF_NODE, &ospf_area_vlink_param3_cmd); |
| install_element (OSPF_NODE, &no_ospf_area_vlink_param3_cmd); |
| |
| install_element (OSPF_NODE, &ospf_area_vlink_param4_cmd); |
| install_element (OSPF_NODE, &no_ospf_area_vlink_param4_cmd); |
| |
| install_element (OSPF_NODE, &ospf_area_vlink_authtype_args_cmd); |
| install_element (OSPF_NODE, &ospf_area_vlink_authtype_cmd); |
| install_element (OSPF_NODE, &no_ospf_area_vlink_authtype_cmd); |
| |
| install_element (OSPF_NODE, &ospf_area_vlink_md5_cmd); |
| install_element (OSPF_NODE, &no_ospf_area_vlink_md5_cmd); |
| |
| install_element (OSPF_NODE, &ospf_area_vlink_authkey_cmd); |
| install_element (OSPF_NODE, &no_ospf_area_vlink_authkey_cmd); |
| |
| install_element (OSPF_NODE, &ospf_area_vlink_authtype_args_authkey_cmd); |
| install_element (OSPF_NODE, &ospf_area_vlink_authtype_authkey_cmd); |
| install_element (OSPF_NODE, &no_ospf_area_vlink_authtype_authkey_cmd); |
| |
| install_element (OSPF_NODE, &ospf_area_vlink_authtype_args_md5_cmd); |
| install_element (OSPF_NODE, &ospf_area_vlink_authtype_md5_cmd); |
| install_element (OSPF_NODE, &no_ospf_area_vlink_authtype_md5_cmd); |
| |
| /* "area stub" commands. */ |
| install_element (OSPF_NODE, &ospf_area_stub_no_summary_cmd); |
| install_element (OSPF_NODE, &ospf_area_stub_cmd); |
| install_element (OSPF_NODE, &no_ospf_area_stub_no_summary_cmd); |
| install_element (OSPF_NODE, &no_ospf_area_stub_cmd); |
| |
| /* "area nssa" commands. */ |
| install_element (OSPF_NODE, &ospf_area_nssa_cmd); |
| install_element (OSPF_NODE, &ospf_area_nssa_translate_no_summary_cmd); |
| install_element (OSPF_NODE, &ospf_area_nssa_translate_cmd); |
| install_element (OSPF_NODE, &ospf_area_nssa_no_summary_cmd); |
| install_element (OSPF_NODE, &no_ospf_area_nssa_cmd); |
| install_element (OSPF_NODE, &no_ospf_area_nssa_no_summary_cmd); |
| |
| install_element (OSPF_NODE, &ospf_area_default_cost_cmd); |
| install_element (OSPF_NODE, &no_ospf_area_default_cost_cmd); |
| |
| install_element (OSPF_NODE, &ospf_area_shortcut_cmd); |
| install_element (OSPF_NODE, &no_ospf_area_shortcut_cmd); |
| |
| install_element (OSPF_NODE, &ospf_area_export_list_cmd); |
| install_element (OSPF_NODE, &no_ospf_area_export_list_cmd); |
| |
| install_element (OSPF_NODE, &ospf_area_filter_list_cmd); |
| install_element (OSPF_NODE, &no_ospf_area_filter_list_cmd); |
| |
| install_element (OSPF_NODE, &ospf_area_import_list_cmd); |
| install_element (OSPF_NODE, &no_ospf_area_import_list_cmd); |
| |
| /* SPF timer commands */ |
| install_element (OSPF_NODE, &ospf_timers_spf_cmd); |
| install_element (OSPF_NODE, &no_ospf_timers_spf_cmd); |
| install_element (OSPF_NODE, &ospf_timers_throttle_spf_cmd); |
| install_element (OSPF_NODE, &no_ospf_timers_throttle_spf_cmd); |
| |
| /* refresh timer commands */ |
| install_element (OSPF_NODE, &ospf_refresh_timer_cmd); |
| install_element (OSPF_NODE, &no_ospf_refresh_timer_val_cmd); |
| install_element (OSPF_NODE, &no_ospf_refresh_timer_cmd); |
| |
| /* max-metric commands */ |
| install_element (OSPF_NODE, &ospf_max_metric_router_lsa_admin_cmd); |
| install_element (OSPF_NODE, &no_ospf_max_metric_router_lsa_admin_cmd); |
| install_element (OSPF_NODE, &ospf_max_metric_router_lsa_startup_cmd); |
| install_element (OSPF_NODE, &no_ospf_max_metric_router_lsa_startup_cmd); |
| install_element (OSPF_NODE, &ospf_max_metric_router_lsa_shutdown_cmd); |
| install_element (OSPF_NODE, &no_ospf_max_metric_router_lsa_shutdown_cmd); |
| |
| /* reference bandwidth commands */ |
| install_element (OSPF_NODE, &ospf_auto_cost_reference_bandwidth_cmd); |
| install_element (OSPF_NODE, &no_ospf_auto_cost_reference_bandwidth_cmd); |
| |
| /* "neighbor" commands. */ |
| install_element (OSPF_NODE, &ospf_neighbor_cmd); |
| install_element (OSPF_NODE, &ospf_neighbor_priority_poll_interval_cmd); |
| install_element (OSPF_NODE, &ospf_neighbor_priority_cmd); |
| install_element (OSPF_NODE, &ospf_neighbor_poll_interval_cmd); |
| install_element (OSPF_NODE, &ospf_neighbor_poll_interval_priority_cmd); |
| install_element (OSPF_NODE, &no_ospf_neighbor_cmd); |
| install_element (OSPF_NODE, &no_ospf_neighbor_priority_cmd); |
| install_element (OSPF_NODE, &no_ospf_neighbor_poll_interval_cmd); |
| |
| /* Init interface related vty commands. */ |
| ospf_vty_if_init (); |
| |
| /* Init zebra related vty commands. */ |
| ospf_vty_zebra_init (); |
| } |