| paul | 8bddafc | 2002-12-13 21:57:32 +0000 | [diff] [blame] | 1 | Summary of CLI commands, expanded for Opaque-LSA/MPLS-TE. |
| 2 | --------------------------------------------------------- |
| 3 | |
| 4 | router> |
| 5 | |
| 6 | show ip ospf database (asbr-summary|external|max-age|network|router|self-originate|summary|opaque-link|opaque-area|opaque-external) |
| 7 | |
| 8 | show ip ospf database (asbr-summary|external|network|router|summary|opaque-link|opaque-area|opaque-external) (self-originate|) |
| 9 | |
| 10 | show ip ospf database (asbr-summary|external|network|router|summary|opaque-link|opaque-area|opaque-external) A.B.C.D |
| 11 | |
| 12 | show ip ospf database (asbr-summary|external|network|router|summary|opaque-link|opaque-area|opaque-external) A.B.C.D (self-originate|) |
| 13 | |
| 14 | show ip ospf database (asbr-summary|external|network|router|summary|opaque-link|opaque-area|opaque-external) A.B.C.D adv-router A.B.C.D |
| 15 | |
| 16 | show ip ospf database (asbr-summary|external|network|router|summary|opaque-link|opaque-area|opaque-external) adv-router A.B.C.D |
| 17 | |
| 18 | --> Add database items: opaque-link, opaque-area, opaque-external |
| 19 | |
| 20 | show mpls-te interface [INTERFACE] |
| 21 | |
| 22 | --> Show current MPLS-TE link-TLV parameters. |
| 23 | If [INTERFACE] is omitted, all interfaces will be displayed. |
| 24 | |
| 25 | show mpls-te router |
| 26 | |
| 27 | --> Show current MPLS-TE Router-TLV parameters. |
| 28 | |
| 29 | router> enable |
| 30 | router# |
| 31 | router# configure terminal |
| 32 | router(config)# interface [INTERFACE] |
| 33 | router(config-if)# |
| 34 | |
| 35 | mpls-te link max-bw BANDWIDTH |
| 36 | |
| 37 | --> Set MPLS-TE link-TLV parameter: Maximum Bandwidth (Bytes/sec). |
| 38 | In integer or floating point format (1000, or 1.0e3) |
| 39 | |
| 40 | mpls-te link max-rsv-bw BANDWIDTH |
| 41 | |
| 42 | --> Set MPLS-TE link-TLV parameter: Maximum Reservable Bandwidth (Bytes/sec). |
| 43 | In integer or floating point format (1000, or 1.0e3) |
| 44 | |
| 45 | mpls-te link metric <0-4294967295> |
| 46 | |
| 47 | --> Set MPLS-TE link-TLV parameter: MPLS-TE metric. |
| 48 | |
| 49 | mpls-te link rsc-clsclr BITPATTERN |
| 50 | |
| 51 | --> Set MPLS-TE link-TLV parameter: Resource Class/Color. |
| 52 | In 32-bit hexadecimal format, with leading "0x" (0x0 - 0xffffffff) |
| 53 | |
| 54 | mpls-te link unrsv-bw <0-7> BANDWIDTH |
| 55 | |
| 56 | --> Set MPLS-TE link-TLV parameter: Unreserved Bandwidth (Bytes/sec). |
| 57 | In integer or floating point format (1000, or 1.0e3) |
| 58 | |
| 59 | router(config-if)# exit |
| 60 | router(config)# router ospf |
| 61 | router(config-router)# |
| 62 | |
| 63 | mpls-te |
| 64 | |
| 65 | --> Enable MPLS-TE functionality. |
| 66 | Note that master-switch "ospf opaque-lsa" must also be specified. |
| 67 | |
| 68 | mpls-te on |
| 69 | |
| 70 | --> Alias of "mpls-te" command. |
| 71 | |
| 72 | mpls-te router-address A.B.C.D |
| 73 | |
| 74 | --> Set MPLS-TE Router-TLV parameter: Router Address. |
| 75 | |
| 76 | no mpls-te |
| 77 | |
| 78 | --> Disable MPLS-TE functionality. |
| 79 | |
| 80 | no ospf opaque-lsa |
| 81 | |
| 82 | --> Disable Opaque-LSAs capability. |
| 83 | This node behaves Opaque-incapable node. |
| 84 | |
| 85 | ospf opaque-lsa |
| 86 | |
| 87 | --> Enable Opaque-LSAs capability. |
| 88 | This is the master-switch to make this node Opaque-capable. |
| 89 | |
| 90 | router# exit |