[CORD-3191] Remove old pmc-olt ref. Replace with voltha
Change-Id: I4c53a3361c26f8111e522c2caeebbbe9a5775813
diff --git a/docs/voltha_install.md b/docs/voltha_install.md
index c8c5428..1469834 100644
--- a/docs/voltha_install.md
+++ b/docs/voltha_install.md
@@ -217,10 +217,10 @@
"devices": {
"of:0001000000000001": {
"basic": {
- "driver": "pmc-olt"
+ "driver": "voltha"
},
"accessDevice": {
- "uplink": "129",
+ "uplink": "128",
"vlan": "300"
}
}
@@ -348,11 +348,11 @@
```shell
onos> devices
-id=of:0001000000000001, available=true, local-status=connected 34m43s ago, role=MASTER, type=SWITCH, mfr=cord project, hw=n/a, sw=logical device for Edgecore ASFvOLT16 OLT, serial=10.6.0.199:59991, driver=pmc-olt, channelId=172.25.0.1:55015, locType=geo, managementAddress=172.25.0.1, name=of:0001000000000001, protocol=OF_13
+id=of:0001000000000001, available=true, local-status=connected 34m43s ago, role=MASTER, type=SWITCH, mfr=cord project, hw=n/a, sw=logical device for Edgecore ASFvOLT16 OLT, serial=10.6.0.199:59991, driver=voltha, channelId=172.25.0.1:55015, locType=geo, managementAddress=172.25.0.1, name=of:0001000000000001, protocol=OF_13
onos> ports
-id=of:0001000000000001, available=true, local-status=connected 34m45s ago, role=MASTER, type=SWITCH, mfr=cord project, hw=n/a, sw=logical device for Edgecore ASFvOLT16 OLT, serial=10.6.0.199:59991, driver=pmc-olt, channelId=172.25.0.1:55015, locType=geo, managementAddress=172.25.0.1, name=of:0001000000000001, protocol=OF_13
- port=21, state=enabled, type=fiber, speed=0 , portName=Enet UNI 1, portMac=00:00:00:01:00:15
- port=129, state=enabled, type=fiber, speed=0 , portName=nni, portMac=00:00:00:00:00:81
+id=of:0001000000000001, available=true, local-status=connected 34m45s ago, role=MASTER, type=SWITCH, mfr=cord project, hw=n/a, sw=logical device for Edgecore ASFvOLT16 OLT, serial=10.6.0.199:59991, driver=voltha, channelId=172.25.0.1:55015, locType=geo, managementAddress=172.25.0.1, name=of:0001000000000001, protocol=OF_13
+ port=16, state=enabled, type=fiber, speed=0 , portName=Enet UNI 1, portMac=00:00:00:01:00:15
+ port=128, state=enabled, type=fiber, speed=0 , portName=nni, portMac=00:00:00:00:00:81
```
If this is all correct, then the final step is to use the ONOS CLI to provision
@@ -360,7 +360,7 @@
```shell
onos> add-subscriber-access <olt_dpid> <uni_port> <c_vlan>
-e.g., add-subscriber-access of:0001000000000001 21 400
+e.g., add-subscriber-access of:0001000000000001 16 400
```
If all is going well, traffic should be able to flow through the PON, to the vSG