| .. |
| SPDX-FileCopyrightText: © 2020 Open Networking Foundation <support@opennetworking.org> |
| SPDX-License-Identifier: Apache-2.0 |
| |
| .. _deployment_5G_guide: |
| |
| 5G Deployment Guide |
| =================== |
| |
| Deployment Overview |
| ------------------- |
| SD-Core is released with Helm chart and container images. |
| We recommend using **Kubernetes** and **Helm** to deploy SD-Core. |
| SD-Core images are hosted on docker hub. |
| |
| Hardware resource requirement |
| ----------------------------- |
| |
| .. list-table:: CPU & Memory Requirements for 5G components |
| :widths: 5 5 5 |
| :header-rows: 1 |
| |
| * - SD-Core Component |
| - Required CPU |
| - Required Memory in Gi |
| * - AMF |
| - 2 CPU Cores |
| - 4Gi |
| * - SMF |
| - 2 CPU Cores |
| - 4Gi |
| * - NRF |
| - 2 CPU Cores |
| - 1Gi |
| * - NSSF |
| - 2 CPU Cores |
| - 1Gi |
| * - AUSF |
| - 1 CPU Cores |
| - 1Gi |
| * - PCF |
| - 1 CPU Cores |
| - 1Gi |
| * - UDR |
| - 2 CPU Cores |
| - 1Gi |
| * - UDM |
| - 2 CPU Cores |
| - 1Gi |
| * - Config5G(webconsole) |
| - 1 CPU Cores |
| - 1Gi |
| * - SimApp |
| - 1 CPU Cores |
| - 1Gi |
| * - MongoDB |
| - 2 CPU Cores |
| - 4Gi |
| * - UPF-Adapter |
| - 1 CPU Cores |
| - 1Gi |
| * - SCTP Load Balancer |
| - 1 CPU Cores |
| - 1Gi |
| |
| .. note:: |
| SD-Core deployment is tested on Intel/AMD hardware. There is WIP to run SD-Core |
| on ARM architecture. |
| |
| Deployment Options |
| ------------------ |
| |
| Development Environments |
| """""""""""""""""""""""" |
| |
| Please refer (see :ref:`aiab-guide`) to setup 5G development environment. |
| |
| Production Environments - 5G |
| """""""""""""""""""""""""""" |
| |
| To install SD-Core into your Kubernetes cluster, follow instructions |
| |
| Step1 - Clone SD-Core 5G Helm chart |
| ''''''''''''''''''''''''''''''''''' |
| .. code-block:: |
| |
| git clone "https://gerrit.opencord.org/sdcore-helm-charts" |
| cd sdcore-helm-charts/sdcore-helm-charts/ |
| helm dep update #Update Helm dependencies |
| |
| Step2 - Prepare your Helm value for 5G |
| '''''''''''''''''''''''''''''''''''''' |
| |
| You can modify existing values.yaml directly, but we recommend composing another value |
| file myvalues.yaml using values.yaml as an example. We are highlighting a few things we |
| need to modify here. More explanation of the supported Helm values can be found in the |
| Configuration section below. |
| |
| Step3 - Install 5G using SD-Core umbrella helm chart |
| '''''''''''''''''''''''''''''''''''''''''''''''''''' |
| |
| The following command will deploy the SD-Core helm chart with release name sdcore-5g in the sdcore-5g namespace. |
| |
| .. code-block:: |
| |
| helm install -n sdcore-5g --create-namespace -f myvalues.yaml sdcore-5g ~/cord/sdcore-helm-charts/sdcore-helm-charts |
| |
| To verify the installation: |
| |
| .. code-block:: |
| |
| helm -n sdcore-5g ls |
| xxxx@node:~$ helm -n sdcore-5g ls |
| NAME NAMESPACE REVISION UPDATED STATUS CHART APP VERSION |
| sdcore-5g sdcore-5g 1 2022-03-05 16:25:32.338495035 -0700 MST deployed sd-core-0.10.9 |
| xxxx@node:~$ |
| |
| xxxx@node:~$ kubectl get pods -n sdcore-5g |
| NAME READY STATUS RESTARTS AGE |
| amf-6cddb6ff5-g5kwp 1/1 Running 0 8d |
| ausf-64fb5c5df5-g9xps 1/1 Running 0 8d |
| gnbsim-0 1/1 Running 0 8d |
| mongodb-0 1/1 Running 0 8d |
| mongodb-1 1/1 Running 0 8d |
| mongodb-arbiter-0 1/1 Running 0 8d |
| nrf-69794885b-pgl8f 1/1 Running 0 8d |
| nssf-fc9c48c89-dxqn7 1/1 Running 0 8d |
| pcf-5c7d7767c9-wv6dl 1/1 Running 0 8d |
| simapp-669b99db9d-lbbm4 1/1 Running 0 8d |
| smf-b87fc6f8f-4jdqr 1/1 Running 0 8d |
| smf-b87fc6f8f-xt2n2 1/1 Running 0 8d |
| udm-f948b57dc-n5b4h 1/1 Running 0 8d |
| udr-698445bd87-8ptpm 1/1 Running 0 8d |
| upf-0 5/5 Running 0 8d |
| upf-adapter-c4844b7fb-wqbvw 1/1 Running 0 8d |
| webui-8cfb9659c-hqfp9 1/1 Running 0 8d |
| xxxx@node:~$ |
| |
| To uninstall: |
| |
| .. code-block:: |
| |
| helm -n sdcore-5g uninstall sdcore-5g |
| kubectl delete namespace sdcore-5g # also remove the sdcore-5g if needed |
| |
| Cloud Native Configuration - 5G |
| """""""""""""""""""""""""""""""" |
| |
| Following configuration need to be enabled in 5G helm values override file |
| |
| Enable AMF Sctp Load Balancer |
| ''''''''''''''''''''''''''''' |
| Edit sd-core-5g-values.yaml as following |
| |
| .. code-block:: |
| |
| sctplb: |
| deploy: true |
| |
| Enable SMF DB Store |
| ''''''''''''''''''' |
| Edit sd-core-5g-values.yaml as following |
| |
| .. code-block:: |
| |
| smf: |
| cfgFiles: |
| smfcfg.conf: |
| configuration: |
| enableDBStore: true |
| |
| Enable UPF-Adapter |
| '''''''''''''''''' |
| Edit sd-core-5g-values.yaml as following |
| |
| .. code-block:: |
| |
| upfadapter: |
| deploy: true |
| |
| Enable NRF Keep-Alive |
| '''''''''''''''''''''' |
| Edit sd-core-5g-values.yaml as following |
| |
| .. code-block:: |
| |
| nrf: |
| cfgFiles: |
| nrfcfg.conf: |
| configuration: |
| mongoDBStreamEnable: false |
| nfProfileExpiryEnable: true |
| nfKeepAliveTime: 60 |
| |
| Enable UE IP-Address allocation by UPF |
| '''''''''''''''''''''''''''''''''''''' |
| This is optional feature to allocate UE IP-Address via UPF rather than locally via SMF. |
| Edit sd-core-5g-values.yaml as following |
| |
| .. code-block:: |
| |
| cpiface: |
| dnn: "internet" |
| hostname: "upf" |
| enable_ue_ip_alloc: true |
| ue_ip_pool: "172.250.0.0/16" |