| # Copyright 2017-present Adtran, Inc. |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| import datetime |
| import random |
| import xmltodict |
| |
| from twisted.internet import reactor |
| from twisted.internet.defer import returnValue, inlineCallbacks, succeed |
| |
| from codec.olt_state import OltState |
| from adapters.adtran_common.download import Download |
| from adapters.adtran_common.flow.flow_entry import FlowEntry |
| from net.pio_zmq import PioClient |
| from net.pon_zmq import PonClient |
| from resources.adtran_olt_resource_manager import AdtranOltResourceMgr |
| from adapters.adtran_common.adtran_device_handler import AdtranDeviceHandler |
| from resources import adtranolt_platform as platform |
| from adapters.adtran_common.net.rcmd import RCmd |
| |
| from pyvoltha.common.tech_profile.tech_profile import * |
| from pyvoltha.common.openflow.utils import ofp, mk_flow_stat, in_port, output, vlan_vid |
| from pyvoltha.adapters.common.frameio.frameio import hexify |
| from pyvoltha.adapters.extensions.omci.omci import * |
| from pyvoltha.protos.voltha_pb2 import Device |
| from pyvoltha.protos.common_pb2 import AdminState, OperStatus |
| from pyvoltha.protos.device_pb2 import ImageDownload, Image, Port |
| from pyvoltha.protos.openflow_13_pb2 import OFPP_MAX, OFPC_GROUP_STATS, OFPC_PORT_STATS, \ |
| OFPC_TABLE_STATS, OFPC_FLOW_STATS, ofp_switch_features, ofp_desc |
| |
| |
| class AdtranOltHandler(AdtranDeviceHandler): |
| """ |
| The OLT Handler is used to wrap a single instance of a 10G OLT 1-U pizza-box |
| """ |
| MIN_OLT_HW_VERSION = datetime.datetime(2017, 1, 5) |
| |
| # Full table output |
| |
| GPON_OLT_HW_URI = '/restconf/data/gpon-olt-hw' |
| GPON_OLT_HW_STATE_URI = GPON_OLT_HW_URI + ':olt-state' |
| GPON_OLT_HW_CONFIG_URI = GPON_OLT_HW_URI + ':olt' |
| GPON_PON_CONFIG_LIST_URI = GPON_OLT_HW_CONFIG_URI + '/pon' |
| |
| # Per-PON info |
| |
| GPON_PON_STATE_URI = GPON_OLT_HW_STATE_URI + '/pon={}' # .format(pon-id) |
| GPON_PON_CONFIG_URI = GPON_PON_CONFIG_LIST_URI + '={}' # .format(pon-id) |
| |
| GPON_ONU_CONFIG_LIST_URI = GPON_PON_CONFIG_URI + '/onus/onu' # .format(pon-id) |
| GPON_ONU_CONFIG_URI = GPON_ONU_CONFIG_LIST_URI + '={}' # .format(pon-id,onu-id) |
| |
| GPON_TCONT_CONFIG_LIST_URI = GPON_ONU_CONFIG_URI + '/t-conts/t-cont' # .format(pon-id,onu-id) |
| GPON_TCONT_CONFIG_URI = GPON_TCONT_CONFIG_LIST_URI + '={}' # .format(pon-id,onu-id,alloc-id) |
| |
| GPON_GEM_CONFIG_LIST_URI = GPON_ONU_CONFIG_URI + '/gem-ports/gem-port' # .format(pon-id,onu-id) |
| GPON_GEM_CONFIG_URI = GPON_GEM_CONFIG_LIST_URI + '={}' # .format(pon-id,onu-id,gem-id) |
| |
| GPON_PON_DISCOVER_ONU = '/restconf/operations/gpon-olt-hw:discover-onu' |
| |
| BASE_ONU_OFFSET = 64 |
| |
| def __init__(self, **kwargs): |
| super(AdtranOltHandler, self).__init__(**kwargs) |
| |
| self.status_poll = None |
| self.status_poll_interval = 5.0 |
| self.status_poll_skew = self.status_poll_interval / 10 |
| self._pon_agent = None |
| self._pio_agent = None |
| self._ssh_deferred = None |
| self._system_id = None |
| self._download_protocols = None |
| self._download_deferred = None |
| self._downloads = {} # name -> Download obj |
| self._pio_exception_map = [] |
| |
| self.downstream_shapping_supported = True # 1971320F1-ML-4154 and later |
| |
| # FIXME: Remove once we containerize. Only exists to keep BroadCom OpenOMCI ONU Happy |
| # when it reaches up our rear and tries to yank out a UNI port number |
| self.platform_class = None |
| |
| # To keep broadcom ONU happy |
| self.platform = platform() # TODO: Remove once tech-profiles & containerization are done !!! |
| |
| def __del__(self): |
| # OLT Specific things here. |
| # |
| # If you receive this during 'enable' of the object, you probably threw an |
| # uncaught exception which triggered an errback in the VOLTHA core. |
| d, self.status_poll = self.status_poll, None |
| |
| # Clean up base class as well |
| AdtranDeviceHandler.__del__(self) |
| |
| def _cancel_deferred(self): |
| d1, self.status_poll = self.status_poll, None |
| d2, self._ssh_deferred = self._ssh_deferred, None |
| d3, self._download_deferred = self._download_deferred, None |
| |
| for d in [d1, d2, d3]: |
| try: |
| if d is not None and not d.called: |
| d.cancel() |
| except: |
| pass |
| |
| def __str__(self): |
| return "AdtranOltHandler: {}".format(self.ip_address) |
| |
| @property |
| def system_id(self): |
| return self._system_id |
| |
| @system_id.setter |
| def system_id(self, value): |
| if self._system_id != value: |
| self._system_id = value |
| |
| data = json.dumps({'olt-id': str(value)}) |
| uri = AdtranOltHandler.GPON_OLT_HW_CONFIG_URI |
| self.rest_client.request('PATCH', uri, data=data, name='olt-system-id') |
| |
| @inlineCallbacks |
| def get_device_info(self, device): |
| """ |
| Perform an initial network operation to discover the device hardware |
| and software version. Serial Number would be helpful as well. |
| |
| Upon successfully retrieving the information, remember to call the |
| 'start_heartbeat' method to keep in contact with the device being managed |
| |
| :param device: A voltha.Device object, with possible device-type |
| specific extensions. Such extensions shall be described as part of |
| the device type specification returned by device_types(). |
| """ |
| from codec.physical_entities_state import PhysicalEntitiesState |
| # TODO: After a CLI 'reboot' command, the device info may get messed up (prints labels and not values) |
| # # Enter device and type 'show' |
| device = { |
| 'model': 'n/a', |
| 'hardware_version': 'unknown', |
| 'serial_number': 'unknown', |
| 'vendor': 'ADTRAN, Inc.', |
| 'firmware_version': 'unknown', |
| 'running-revision': 'unknown', |
| 'candidate-revision': 'unknown', |
| 'startup-revision': 'unknown', |
| 'software-images': [] |
| } |
| try: |
| pe_state = PhysicalEntitiesState(self.netconf_client) |
| self.startup = pe_state.get_state() |
| results = yield self.startup |
| |
| if results.ok: |
| modules = pe_state.get_physical_entities('adtn-phys-mod:module') |
| |
| if isinstance(modules, list): |
| module = modules[0] |
| |
| name = str(module.get('model-name', 'n/a')).translate(None, '?') |
| model = str(module.get('model-number', 'n/a')).translate(None, '?') |
| |
| device['model'] = '{} - {}'.format(name, model) if len(name) > 0 else \ |
| module.get('parent-entity', 'n/a') |
| device['hardware_version'] = str(module.get('hardware-revision', |
| 'n/a')).translate(None, '?') |
| device['serial_number'] = str(module.get('serial-number', |
| 'n/a')).translate(None, '?') |
| if 'software' in module: |
| if 'software' in module['software']: |
| software = module['software']['software'] |
| if isinstance(software, dict): |
| device['running-revision'] = str(software.get('running-revision', |
| 'n/a')).translate(None, '?') |
| device['candidate-revision'] = str(software.get('candidate-revision', |
| 'n/a')).translate(None, '?') |
| device['startup-revision'] = str(software.get('startup-revision', |
| 'n/a')).translate(None, '?') |
| elif isinstance(software, list): |
| for sw_item in software: |
| sw_type = sw_item.get('name', '').lower() |
| if sw_type == 'firmware': |
| device['firmware_version'] = str(sw_item.get('running-revision', |
| 'unknown')).translate(None, '?') |
| elif sw_type == 'software': |
| for rev_type in ['startup-revision', |
| 'running-revision', |
| 'candidate-revision']: |
| if rev_type in sw_item: |
| image = Image(name=rev_type, |
| version=sw_item[rev_type], |
| is_active=(rev_type == 'running-revision'), |
| is_committed=True, |
| is_valid=True, |
| install_datetime='Not Available', |
| hash='Not Available') |
| device['software-images'].append(image) |
| |
| # Update features based on version |
| # Format expected to be similar to: 1971320F1-ML-4154 |
| |
| running_version = next((image.version for image in device.get('software-images', list()) |
| if image.is_active), '').split('-') |
| if len(running_version) > 2: |
| try: |
| self.downstream_shapping_supported = int(running_version[-1]) >= 4154 |
| except ValueError: |
| pass |
| |
| except Exception as e: |
| self.log.exception('dev-info-failure', e=e) |
| raise |
| |
| returnValue(device) |
| |
| def initialize_resource_manager(self): |
| # Initialize the resource and tech profile managers |
| extra_args = '--olt_model {}'.format(self.resource_manager_key) |
| self.resource_mgr = AdtranOltResourceMgr(self.device_id, |
| self.host_and_port, |
| extra_args, |
| self.default_resource_mgr_device_info) |
| self._populate_tech_profile_per_pon_port() |
| |
| @property |
| def default_resource_mgr_device_info(self): |
| class AdtranOltDevInfo(object): |
| def __init__(self, pon_ports): |
| self.technology = "xgspon" |
| self.onu_id_start = 0 |
| self.onu_id_end = platform.MAX_ONUS_PER_PON |
| self.alloc_id_start = platform.MIN_TCONT_ALLOC_ID |
| self.alloc_id_end = platform.MAX_TCONT_ALLOC_ID |
| self.gemport_id_start = platform.MIN_GEM_PORT_ID |
| self.gemport_id_end = platform.MAX_GEM_PORT_ID |
| self.pon_ports = len(pon_ports) |
| self.max_tconts = platform.MAX_TCONTS_PER_ONU |
| self.max_gem_ports = platform.MAX_GEM_PORTS_PER_ONU |
| self.intf_ids = pon_ports.keys() # PON IDs |
| |
| return AdtranOltDevInfo(self.southbound_ports) |
| |
| def _populate_tech_profile_per_pon_port(self): |
| self.tech_profiles = {intf_id: self.resource_mgr.resource_managers[intf_id].tech_profile |
| for intf_id in self.resource_mgr.device_info.intf_ids} |
| |
| # Make sure we have as many tech_profiles as there are pon ports on |
| # the device |
| assert len(self.tech_profiles) == self.resource_mgr.device_info.pon_ports |
| |
| def get_tp_path(self, intf_id, ofp_port_name): |
| # TODO: Should get Table id form the flow, as of now hardcoded to DEFAULT_TECH_PROFILE_TABLE_ID (64) |
| # 'tp_path' contains the suffix part of the tech_profile_instance path. |
| # The prefix to the 'tp_path' should be set to \ |
| # TechProfile.KV_STORE_TECH_PROFILE_PATH_PREFIX by the ONU adapter. |
| return self.tech_profiles[intf_id].get_tp_path(DEFAULT_TECH_PROFILE_TABLE_ID, |
| ofp_port_name) |
| |
| def delete_tech_profile_instance(self, intf_id, onu_id, logical_port): |
| # Remove the TP instance associated with the ONU |
| ofp_port_name = self.get_ofp_port_name(intf_id, onu_id, logical_port) |
| tp_path = self.get_tp_path(intf_id, ofp_port_name) |
| return self.tech_profiles[intf_id].delete_tech_profile_instance(tp_path) |
| |
| def get_ofp_port_name(self, pon_id, onu_id, logical_port_number): |
| parent_port_no = self.pon_id_to_port_number(pon_id) |
| child_device = self.adapter_agent.get_child_device(self.device_id, |
| parent_port_no=parent_port_no, onu_id=onu_id) |
| if child_device is None: |
| self.log.error("could-not-find-child-device", parent_port_no=pon_id, onu_id=onu_id) |
| return None, None |
| |
| ports = self.adapter_agent.get_ports(child_device.id, Port.ETHERNET_UNI) |
| port = next((port for port in ports if port.port_no == logical_port_number), None) |
| logical_port = self.adapter_agent.get_logical_port(self.logical_device_id, |
| port.label) |
| ofp_port_name = (logical_port.ofp_port.name, logical_port.ofp_port.port_no) |
| |
| return ofp_port_name |
| |
| @inlineCallbacks |
| def enumerate_northbound_ports(self, device): |
| """ |
| Enumerate all northbound ports of this device. |
| |
| :param device: A voltha.Device object, with possible device-type |
| specific extensions. |
| :return: (Deferred or None). |
| """ |
| try: |
| # Also get the MAC Address for the OLT |
| command = "ip link | grep -A1 eth0 | sed -n -e 's/^.*ether //p' | awk '{ print $1 }'" |
| rcmd = RCmd(self.ip_address, self.netconf_username, self.netconf_password, |
| command) |
| address = yield rcmd.execute() |
| self.mac_address = address.replace('\n', '') |
| self.log.info("mac-addr", mac_addr=self.mac_address) |
| |
| except Exception as e: |
| log.exception('mac-address', e=e) |
| raise |
| |
| try: |
| from codec.ietf_interfaces import IetfInterfacesState |
| from nni_port import MockNniPort |
| |
| ietf_interfaces = IetfInterfacesState(self.netconf_client) |
| self.startup = ietf_interfaces.get_state() |
| results = yield self.startup |
| |
| ports = ietf_interfaces.get_port_entries(results, 'ethernet') |
| returnValue(ports) |
| |
| except Exception as e: |
| log.exception('enumerate_northbound_ports', e=e) |
| raise |
| |
| def process_northbound_ports(self, device, results): |
| """ |
| Process the results from the 'enumerate_northbound_ports' method. |
| |
| :param device: A voltha.Device object, with possible device-type |
| specific extensions. |
| :param results: Results from the 'enumerate_northbound_ports' method that |
| you implemented. The type and contents are up to you to |
| :return: (Deferred or None). |
| """ |
| from nni_port import NniPort, MockNniPort |
| |
| for port in results.itervalues(): |
| port_no = port.get('port_no') |
| assert port_no, 'Port number not found' |
| |
| # May already exist if device was not fully reachable when first enabled |
| if port_no not in self.northbound_ports: |
| self.log.info('processing-nni', port_no=port_no, name=port['port_no']) |
| self.northbound_ports[port_no] = NniPort(self, **port) |
| |
| if len(self.northbound_ports) >= self.max_nni_ports: # TODO: For now, limit number of NNI ports to make debugging easier |
| break |
| |
| self.num_northbound_ports = len(self.northbound_ports) |
| |
| def _olt_version(self): |
| # Version |
| # 0 Unknown |
| # 1 V1 OMCI format |
| # 2 V2 OMCI format |
| # 3 2018-01-11 or later |
| version = 0 |
| info = self._rest_support.get('module-info', [dict()]) |
| hw_mod_ver_str = next((mod.get('revision') for mod in info |
| if mod.get('module-name', '').lower() == 'gpon-olt-hw'), None) |
| |
| if hw_mod_ver_str is not None: |
| try: |
| from datetime import datetime |
| hw_mod_dt = datetime.strptime(hw_mod_ver_str, '%Y-%m-%d') |
| version = 2 if hw_mod_dt >= datetime(2017, 9, 21) else 2 |
| |
| except Exception as e: |
| self.log.exception('ver-str-check', e=e) |
| |
| return version |
| |
| @inlineCallbacks |
| def enumerate_southbound_ports(self, device): |
| """ |
| Enumerate all southbound ports of this device. |
| |
| :param device: A voltha.Device object, with possible device-type |
| specific extensions. |
| :return: (Deferred or None). |
| """ |
| ############################################################################### |
| # Determine number of southbound ports. We know it is 16, but this keeps this |
| # device adapter generic for our other OLTs up to this point. |
| |
| self.startup = self.rest_client.request('GET', self.GPON_PON_CONFIG_LIST_URI, |
| 'pon-config') |
| try: |
| from codec.ietf_interfaces import IetfInterfacesState |
| from nni_port import MockNniPort |
| |
| results = yield self.startup |
| |
| ietf_interfaces = IetfInterfacesState(self.netconf_client) |
| self.startup = ietf_interfaces.get_state() |
| nc_results = yield self.startup |
| |
| ports = ietf_interfaces.get_port_entries(nc_results, 'xpon') |
| if len(ports) == 0: |
| ports = ietf_interfaces.get_port_entries(nc_results, |
| 'channel-termination') |
| for data in results: |
| pon_id = data['pon-id'] |
| port = ports[pon_id + 1] |
| port['pon-id'] = pon_id |
| port['admin_state'] = AdminState.ENABLED \ |
| if data.get('enabled', True)\ |
| else AdminState.DISABLED |
| |
| except Exception as e: |
| log.exception('enumerate_southbound_ports', e=e) |
| raise |
| |
| returnValue(ports) |
| |
| def process_southbound_ports(self, device, results): |
| """ |
| Process the results from the 'enumerate_southbound_ports' method. |
| |
| :param device: A voltha.Device object, with possible device-type |
| specific extensions. |
| :param results: Results from the 'enumerate_southbound_ports' method that |
| you implemented. The type and contents are up to you to |
| :return: (Deferred or None). |
| """ |
| from pon_port import PonPort |
| |
| for pon in results.itervalues(): |
| pon_id = pon.get('pon-id') |
| assert pon_id is not None, 'PON ID not found' |
| if pon['ifIndex'] is None: |
| pon['port_no'] = self.pon_id_to_port_number(pon_id) |
| else: |
| pass # Need to adjust ONU numbering !!!! |
| |
| # May already exist if device was not fully reachable when first enabled |
| if pon_id not in self.southbound_ports: |
| self.southbound_ports[pon_id] = PonPort(self, **pon) |
| |
| self.num_southbound_ports = len(self.southbound_ports) |
| |
| def pon(self, pon_id): |
| return self.southbound_ports.get(pon_id) |
| |
| def complete_device_specific_activation(self, device, reconciling): |
| """ |
| Perform an initial network operation to discover the device hardware |
| and software version. Serial Number would be helpful as well. |
| |
| This method is called from within the base class's activate generator. |
| |
| :param device: A voltha.Device object, with possible device-type |
| specific extensions. Such extensions shall be described as part of |
| the device type specification returned by device_types(). |
| |
| :param reconciling: (boolean) True if taking over for another VOLTHA |
| """ |
| # ZeroMQ clients |
| self._zmq_startup() |
| |
| # Download support |
| self._download_deferred = reactor.callLater(0, self._get_download_protocols) |
| |
| # Register for adapter messages |
| self.adapter_agent.register_for_inter_adapter_messages() |
| |
| # PON Status |
| self.status_poll = reactor.callLater(5, self.poll_for_status) |
| return succeed('Done') |
| |
| def on_heatbeat_alarm(self, active): |
| if not active: |
| self.ready_network_access() |
| |
| @inlineCallbacks |
| def _get_download_protocols(self): |
| if self._download_protocols is None: |
| try: |
| config = '<filter>' + \ |
| '<file-servers-state xmlns="http://www.adtran.com/ns/yang/adtran-file-servers">' + \ |
| '<profiles>' + \ |
| '<supported-protocol/>' + \ |
| '</profiles>' + \ |
| '</file-servers-state>' + \ |
| '</filter>' |
| |
| results = yield self.netconf_client.get(config) |
| |
| result_dict = xmltodict.parse(results.data_xml) |
| entries = result_dict['data']['file-servers-state']['profiles']['supported-protocol'] |
| self._download_protocols = [entry['#text'].split(':')[-1] for entry in entries |
| if '#text' in entry] |
| |
| except Exception as e: |
| self.log.exception('protocols', e=e) |
| self._download_protocols = None |
| self._download_deferred = reactor.callLater(10, self._get_download_protocols) |
| |
| @inlineCallbacks |
| def ready_network_access(self): |
| # Check for port status |
| command = 'netstat -pan | grep -i 0.0.0.0:{} | wc -l'.format(self.pon_agent_port) |
| rcmd = RCmd(self.ip_address, self.netconf_username, self.netconf_password, command) |
| |
| try: |
| self.log.debug('check-request', command=command) |
| results = yield rcmd.execute() |
| self.log.info('check-results', results=results, result_type=type(results)) |
| create_it = int(results) != 1 |
| |
| except Exception as e: |
| self.log.exception('find', e=e) |
| create_it = True |
| |
| if create_it: |
| def v1_method(): |
| command = 'mkdir -p /etc/pon_agent; touch /etc/pon_agent/debug.conf; ' |
| command += 'ps -ae | grep -i ngpon2_agent; ' |
| command += 'service_supervisor stop ngpon2_agent; service_supervisor start ngpon2_agent; ' |
| command += 'ps -ae | grep -i ngpon2_agent' |
| |
| self.log.debug('create-request', command=command) |
| return RCmd(self.ip_address, self.netconf_username, self.netconf_password, command) |
| |
| def v2_v3_method(): |
| # Old V2 method |
| # For V2 images, want -> export ZMQ_LISTEN_ON_ANY_ADDRESS=1 |
| # For V3+ images, want -> export AGENT_LISTEN_ON_ANY_ADDRESS=1 |
| |
| # V3 unifies listening port, compatible with v2 |
| cmd = "sed --in-place '/add feature/aexport ZMQ_LISTEN_ON_ANY_ADDRESS=1' " \ |
| "/etc/ngpon2_agent/ngpon2_agent_feature_flags; " |
| cmd += "sed --in-place '/add feature/aexport AGENT_LISTEN_ON_ANY_ADDRESS=1' " \ |
| "/etc/ngpon2_agent/ngpon2_agent_feature_flags; " |
| |
| # Note: 'ps' commands are to help decorate the logfile with useful info |
| cmd += 'ps -ae | grep -i ngpon2_agent; ' |
| cmd += 'service_supervisor stop ngpon2_agent; service_supervisor start ngpon2_agent; ' |
| cmd += 'ps -ae | grep -i ngpon2_agent' |
| |
| self.log.debug('create-request', command=cmd) |
| return RCmd(self.ip_address, self.netconf_username, self.netconf_password, cmd) |
| |
| # Look for version |
| next_run = 15 |
| version = v2_v3_method # NOTE: Only v2 or later supported. |
| |
| if version is not None: |
| try: |
| rcmd = version() |
| results = yield rcmd.execute() |
| self.log.info('create-results', results=results, result_type=type(results)) |
| |
| except Exception as e: |
| self.log.exception('mkdir-and-restart', e=e) |
| else: |
| next_run = 0 |
| |
| if next_run > 0: |
| self._ssh_deferred = reactor.callLater(next_run, self.ready_network_access) |
| |
| returnValue('retrying' if next_run > 0 else 'ready') |
| |
| def _zmq_startup(self): |
| # ZeroMQ clients |
| self._pon_agent = PonClient(self.ip_address, |
| port=self.pon_agent_port, |
| rx_callback=self.rx_pa_packet) |
| |
| try: |
| self._pio_agent = PioClient(self.ip_address, |
| port=self.pio_port, |
| rx_callback=self.rx_pio_packet) |
| except Exception as e: |
| self._pio_agent = None |
| self.log.exception('pio-agent', e=e) |
| |
| def _zmq_shutdown(self): |
| pon, self._pon_agent = self._pon_agent, None |
| pio, self._pio_agent = self._pio_agent, None |
| |
| for c in [pon, pio]: |
| if c is not None: |
| try: |
| c.shutdown() |
| except: |
| pass |
| |
| def _unregister_for_inter_adapter_messages(self): |
| try: |
| self.adapter_agent.unregister_for_inter_adapter_messages() |
| except: |
| pass |
| |
| def disable(self): |
| self._cancel_deferred() |
| |
| # Drop registration for adapter messages |
| self._unregister_for_inter_adapter_messages() |
| self._zmq_shutdown() |
| self._pio_exception_map = [] |
| |
| super(AdtranOltHandler, self).disable() |
| |
| def reenable(self, done_deferred=None): |
| super(AdtranOltHandler, self).reenable(done_deferred=done_deferred) |
| |
| # Only do the re-enable if we fully came up on the very first enable attempt. |
| # If we had not, the base class will have initiated the 'activate' for us |
| |
| if self._initial_enable_complete: |
| self._zmq_startup() |
| self.adapter_agent.register_for_inter_adapter_messages() |
| self.status_poll = reactor.callLater(1, self.poll_for_status) |
| |
| def reboot(self): |
| if not self._initial_enable_complete: |
| # Never contacted the device on the initial startup, do 'activate' steps instead |
| return |
| |
| self._cancel_deferred() |
| |
| # Drop registration for adapter messages |
| self._unregister_for_inter_adapter_messages() |
| self._zmq_shutdown() |
| |
| # Download supported protocols may change (if new image gets activated) |
| self._download_protocols = None |
| |
| super(AdtranOltHandler, self).reboot() |
| |
| def _finish_reboot(self, timeout, previous_oper_status, previous_conn_status): |
| super(AdtranOltHandler, self)._finish_reboot(timeout, previous_oper_status, previous_conn_status) |
| |
| self.ready_network_access() |
| |
| # Download support |
| self._download_deferred = reactor.callLater(0, self._get_download_protocols) |
| |
| # Register for adapter messages |
| self.adapter_agent.register_for_inter_adapter_messages() |
| self._zmq_startup() |
| |
| self.status_poll = reactor.callLater(5, self.poll_for_status) |
| |
| def delete(self): |
| self._cancel_deferred() |
| |
| # Drop registration for adapter messages |
| self._unregister_for_inter_adapter_messages() |
| self._zmq_shutdown() |
| |
| super(AdtranOltHandler, self).delete() |
| |
| def rx_pa_packet(self, packets): |
| if self._pon_agent is not None: |
| for packet in packets: |
| try: |
| pon_id, onu_id, msg_bytes, is_omci = self._pon_agent.decode_packet(packet) |
| |
| if is_omci: |
| proxy_address = self._pon_onu_id_to_proxy_address(pon_id, onu_id) |
| |
| if proxy_address is not None: |
| self.adapter_agent.receive_proxied_message(proxy_address, msg_bytes) |
| |
| except Exception as e: |
| self.log.exception('rx-pon-agent-packet', e=e) |
| |
| def _compute_logical_port_no(self, port_no, evc_map, packet): |
| logical_port_no = None |
| |
| # Upstream direction? |
| if self.is_pon_port(port_no): |
| #TODO: Validate the evc-map name |
| from pyvoltha.adapters.adtran_common.flow.evc_map import EVCMap |
| map_info = EVCMap.decode_evc_map_name(evc_map) |
| logical_port_no = int(map_info.get('ingress-port')) |
| |
| if logical_port_no is None: |
| # Get PON |
| pon = self.get_southbound_port(port_no) |
| |
| # Examine Packet and decode gvid |
| if packet is not None: |
| pass |
| |
| elif self.is_nni_port(port_no): |
| nni = self.get_northbound_port(port_no) |
| logical_port = nni.get_logical_port() if nni is not None else None |
| logical_port_no = logical_port.ofp_port.port_no if logical_port is not None else None |
| |
| # TODO: Need to decode base on port_no & evc_map |
| return logical_port_no |
| |
| def rx_pio_packet(self, packets): |
| self.log.debug('rx-packet-in', type=type(packets), data=packets) |
| assert isinstance(packets, list), 'Expected a list of packets' |
| |
| # TODO self._pio_agent.socket.socket.closed might be a good check here as well |
| if self.logical_device_id is not None and self._pio_agent is not None: |
| for packet in packets: |
| url_type = self._pio_agent.get_url_type(packet) |
| if url_type == PioClient.UrlType.EVCMAPS_RESPONSE: |
| exception_map = self._pio_agent.decode_query_response_packet(packet) |
| self.log.debug('rx-pio-packet', exception_map=exception_map) |
| # update latest pio exception map |
| self._pio_exception_map = exception_map |
| |
| elif url_type == PioClient.UrlType.PACKET_IN: |
| try: |
| from scapy.layers.l2 import Ether, Dot1Q |
| ifindex, evc_map, packet = self._pio_agent.decode_packet(packet) |
| |
| # convert ifindex to physical port number |
| # pon port numbers start at 60001 and end at 600016 (16 pons) |
| if ifindex > 60000 and ifindex < 60017: |
| port_no = (ifindex - 60000) + 4 |
| # nni port numbers start at 1401 and end at 1404 (16 nnis) |
| elif ifindex > 1400 and ifindex < 1405: |
| port_no = ifindex - 1400 |
| else: |
| raise ValueError('Unknown physical port. ifindex: {}'.format(ifindex)) |
| |
| logical_port_no = self._compute_logical_port_no(port_no, evc_map, packet) |
| |
| if logical_port_no is not None: |
| if self.is_pon_port(port_no) and packet.haslayer(Dot1Q): |
| # Scrub g-vid |
| inner_pkt = packet.getlayer(Dot1Q) |
| assert inner_pkt.haslayer(Dot1Q), 'Expected a C-Tag' |
| packet = Ether(src=packet.src, dst=packet.dst, type=inner_pkt.type)\ |
| / inner_pkt.payload |
| |
| self.adapter_agent.send_packet_in(logical_device_id=self.logical_device_id, |
| logical_port_no=logical_port_no, |
| packet=str(packet)) |
| else: |
| self.log.warn('logical-port-not-found', port_no=port_no, evc_map=evc_map) |
| |
| except Exception as e: |
| self.log.exception('rx-pio-packet', e=e) |
| |
| else: |
| self.log.warn('packet-in-unknown-url-type', url_type=url_type) |
| |
| def packet_out(self, egress_port, msg): |
| """ |
| Pass a packet_out message content to adapter so that it can forward it |
| out to the device. This is only called on root devices. |
| |
| :param egress_port: egress logical port number |
| :param msg: actual message |
| :return: None """ |
| |
| if self.pio_port is not None: |
| from scapy.layers.l2 import Ether, Dot1Q |
| from scapy.layers.inet import UDP |
| |
| self.log.debug('sending-packet-out', egress_port=egress_port, |
| msg=hexify(msg)) |
| pkt = Ether(msg) |
| |
| # Remove any extra tags |
| while pkt.type == 0x8100: |
| msg_hex = hexify(msg) |
| msg_hex = msg_hex[:24] + msg_hex[32:] |
| bytes = [] |
| msg_hex = ''.join(msg_hex.split(" ")) |
| for i in range(0, len(msg_hex), 2): |
| bytes.append(chr(int(msg_hex[i:i+2], 16))) |
| |
| msg = ''.join(bytes) |
| pkt = Ether(msg) |
| |
| if self._pio_agent is not None: |
| port, ctag, vlan_id, evcmapname = FlowEntry.get_packetout_info(self, egress_port) |
| exceptiontype = None |
| if pkt.type == FlowEntry.EtherType.EAPOL: |
| exceptiontype = 'eapol' |
| ctag = self.utility_vlan |
| elif pkt.type == 2: |
| exceptiontype = 'igmp' |
| elif pkt.type == FlowEntry.EtherType.IPv4: |
| if UDP in pkt and pkt[UDP].sport == 67 and pkt[UDP].dport == 68: |
| exceptiontype = 'dhcp' |
| |
| if exceptiontype is None: |
| self.log.warn('packet-out-exceptiontype-unknown', eEtherType=pkt.type) |
| |
| elif port is not None and ctag is not None and vlan_id is not None and \ |
| evcmapname is not None and self.pio_exception_exists(evcmapname, exceptiontype): |
| |
| self.log.debug('sending-pio-packet-out', port=port, ctag=ctag, vlan_id=vlan_id, |
| evcmapname=evcmapname, exceptiontype=exceptiontype) |
| out_pkt = ( |
| Ether(src=pkt.src, dst=pkt.dst) / |
| Dot1Q(vlan=vlan_id) / |
| Dot1Q(vlan=ctag, type=pkt.type) / |
| pkt.payload |
| ) |
| data = self._pio_agent.encode_packet(port, str(out_pkt), evcmapname, exceptiontype) |
| self.log.debug('pio-packet-out', message=data) |
| try: |
| self._pio_agent.send(data) |
| |
| except Exception as e: |
| self.log.exception('pio-send', egress_port=egress_port, e=e) |
| else: |
| self.log.warn('packet-out-flow-not-found', egress_port=egress_port) |
| |
| def pio_exception_exists(self, name, exp): |
| # verify exception is in the OLT's reported exception map for this evcmap name |
| if exp is None: |
| return False |
| entry = next((entry for entry in self._pio_exception_map if entry['evc-map-name'] == name), None) |
| if entry is None: |
| return False |
| if exp not in entry['exception-types']: |
| return False |
| return True |
| |
| def send_packet_exceptions_request(self): |
| if self._pio_agent is not None: |
| request = self._pio_agent.query_request_packet() |
| try: |
| self._pio_agent.send(request) |
| |
| except Exception as e: |
| self.log.exception('pio-send', e=e) |
| |
| def poll_for_status(self): |
| self.log.debug('Initiating-status-poll') |
| |
| device = self.adapter_agent.get_device(self.device_id) |
| |
| if device.admin_state == AdminState.ENABLED and\ |
| device.oper_status != OperStatus.ACTIVATING and\ |
| self.rest_client is not None: |
| uri = AdtranOltHandler.GPON_OLT_HW_STATE_URI |
| name = 'pon-status-poll' |
| self.status_poll = self.rest_client.request('GET', uri, name=name) |
| self.status_poll.addBoth(self.status_poll_complete) |
| else: |
| self.status_poll = reactor.callLater(0, self.status_poll_complete, 'inactive') |
| |
| def status_poll_complete(self, results): |
| """ |
| Results of the status poll |
| :param results: |
| """ |
| from pon_port import PonPort |
| |
| if isinstance(results, dict) and 'pon' in results: |
| try: |
| self.log.debug('status-success') |
| for pon_id, pon in OltState(results).pons.iteritems(): |
| pon_port = self.southbound_ports.get(pon_id, None) |
| |
| if pon_port is not None and pon_port.state == PonPort.State.RUNNING: |
| pon_port.process_status_poll(pon) |
| |
| except Exception as e: |
| self.log.exception('PON-status-poll', e=e) |
| |
| # Reschedule |
| |
| delay = self.status_poll_interval |
| delay += random.uniform(-delay / 10, delay / 10) |
| |
| self.status_poll = reactor.callLater(delay, self.poll_for_status) |
| |
| def _create_utility_flow(self): |
| nni_port = self.northbound_ports.get(1).port_no |
| pon_port = self.southbound_ports.get(0).port_no |
| |
| return mk_flow_stat( |
| priority=200, |
| match_fields=[ |
| in_port(nni_port), |
| vlan_vid(ofp.OFPVID_PRESENT + self.utility_vlan) |
| ], |
| actions=[output(pon_port)] |
| ) |
| |
| @inlineCallbacks |
| def update_flow_table(self, flows, device): |
| """ |
| Update the flow table on the OLT. If an existing flow is not in the list, it needs |
| to be removed from the device. |
| |
| :param flows: List of flows that should be installed upon completion of this function |
| :param device: A voltha.Device object, with possible device-type |
| specific extensions. |
| """ |
| self.log.debug('bulk-flow-update', num_flows=len(flows), |
| device_id=device.id, flows=flows) |
| |
| valid_flows = [] |
| |
| if flows: |
| # Special helper egress Packet In/Out flows |
| special_flow = self._create_utility_flow() |
| valid_flow, evc = FlowEntry.create(special_flow, self) |
| |
| if valid_flow is not None: |
| valid_flows.append(valid_flow.flow_id) |
| |
| if evc is not None: |
| try: |
| evc.schedule_install() |
| self.add_evc(evc) |
| |
| except Exception as e: |
| evc.status = 'EVC Install Exception: {}'.format(e.message) |
| self.log.exception('EVC-install', e=e) |
| |
| # verify exception flows were installed by OLT PET process |
| reactor.callLater(5, self.send_packet_exceptions_request) |
| |
| # Now process bulk flows |
| for flow in flows: |
| try: |
| # Try to create an EVC. |
| # |
| # The first result is the flow entry that was created. This could be a match to an |
| # existing flow since it is a bulk update. None is returned only if no match to |
| # an existing entry is found and decode failed (unsupported field) |
| # |
| # The second result is the EVC this flow should be added to. This could be an |
| # existing flow (so your adding another EVC-MAP) or a brand new EVC (no existing |
| # EVC-MAPs). None is returned if there are not a valid EVC that can be created YET. |
| |
| valid_flow, evc = FlowEntry.create(flow, self) |
| |
| if valid_flow is not None: |
| valid_flows.append(valid_flow.flow_id) |
| |
| if evc is not None: |
| try: |
| evc.schedule_install() |
| self.add_evc(evc) |
| |
| except Exception as e: |
| evc.status = 'EVC Install Exception: {}'.format(e.message) |
| self.log.exception('EVC-install', e=e) |
| |
| except Exception as e: |
| self.log.exception('bulk-flow-update-add', e=e) |
| |
| # Now drop all flows from this device that were not in this bulk update |
| try: |
| yield FlowEntry.drop_missing_flows(self, valid_flows) |
| |
| except Exception as e: |
| self.log.exception('bulk-flow-update-remove', e=e) |
| |
| def remove_from_flow_table(self, _flows): |
| """ |
| Remove flows from the device |
| |
| :param _flows: (list) Flows |
| """ |
| raise NotImplementedError |
| |
| def add_to_flow_table(self, _flows): |
| """ |
| Remove flows from the device |
| |
| :param _flows: (list) Flows |
| """ |
| raise NotImplementedError |
| |
| def get_ofp_device_info(self, device): |
| """ |
| Retrieve the OLT device info. This includes the ofp_desc and |
| ofp_switch_features. The existing ofp structures can be used, |
| or all the attributes get added to the Device definition or a new proto |
| definition gets created. This API will allow the Core to create a |
| LogicalDevice associated with this device (OLT only). |
| :param device: device |
| :return: Proto Message (TBD) |
| """ |
| from pyvoltha.protos.inter_container_pb2 import SwitchCapability |
| version = device.images.image[0].version |
| |
| return SwitchCapability( |
| desc=ofp_desc(mfr_desc='VOLTHA Project', |
| hw_desc=device.hardware_version, |
| sw_desc=version, |
| serial_num=device.serial_number, |
| dp_desc='n/a'), |
| switch_features=ofp_switch_features(n_buffers=256, # TODO fake for now |
| n_tables=2, # TODO ditto |
| capabilities=( # TODO and ditto |
| OFPC_FLOW_STATS | |
| OFPC_TABLE_STATS | |
| OFPC_PORT_STATS | |
| OFPC_GROUP_STATS)) |
| ) |
| |
| def get_ofp_port_info(self, device, port_no): |
| """ |
| Retrieve the port info. This includes the ofp_port. The existing ofp |
| structure can be used, or all the attributes get added to the Port |
| definitions or a new proto definition gets created. This API will allow |
| the Core to create a LogicalPort associated with this device. |
| :param device: device |
| :param port_no: port number |
| :return: Proto Message (TBD) |
| """ |
| from pyvoltha.protos.inter_container_pb2 import PortCapability |
| # Since the adapter created the device port then it has the reference of the port to |
| # return the capability. TODO: Do a lookup on the NNI port number and return the |
| # appropriate attributes |
| self.log.info('get_ofp_port_info', port_no=port_no, |
| info=self.ofp_port_no, device_id=device.id) |
| |
| nni = self.get_northbound_port(port_no) |
| if nni is not None: |
| lp = nni.get_logical_port() |
| if lp is not None: |
| return PortCapability(port=lp) |
| |
| # @inlineCallbacks |
| def send_proxied_message(self, proxy_address, msg): |
| self.log.debug('sending-proxied-message', msg=msg) |
| |
| if isinstance(msg, Packet): |
| msg = str(msg) |
| |
| if self._pon_agent is not None: |
| pon_id, onu_id = self._proxy_address_to_pon_onu_id(proxy_address) |
| |
| pon = self.southbound_ports.get(pon_id) |
| |
| if pon is not None and pon.enabled: |
| onu = pon.onu(onu_id) |
| |
| if onu is not None and onu.enabled: |
| data = self._pon_agent.encode_omci_packet(msg, pon_id, onu_id) |
| try: |
| self._pon_agent.send(data) |
| |
| except Exception as e: |
| self.log.exception('pon-agent-send', pon_id=pon_id, onu_id=onu_id, e=e) |
| else: |
| self.log.debug('onu-invalid-or-disabled', pon_id=pon_id, onu_id=onu_id) |
| else: |
| self.log.debug('pon-invalid-or-disabled', pon_id=pon_id) |
| |
| def _onu_offset(self, onu_id): |
| # Start ONU's just past the southbound PON port numbers. Since ONU ID's start |
| # at zero, add one |
| # assert AdtranOltHandler.BASE_ONU_OFFSET > (self.num_northbound_ports + self.num_southbound_ports + 1) |
| assert AdtranOltHandler.BASE_ONU_OFFSET > (4 + self.num_southbound_ports + 1) # Skip over uninitialized ports |
| return AdtranOltHandler.BASE_ONU_OFFSET + onu_id |
| |
| def _pon_onu_id_to_proxy_address(self, pon_id, onu_id): |
| if pon_id in self.southbound_ports: |
| pon = self.southbound_ports[pon_id] |
| onu = pon.onu(onu_id) |
| proxy_address = onu.proxy_address if onu is not None else None |
| |
| else: |
| proxy_address = None |
| |
| return proxy_address |
| |
| def _proxy_address_to_pon_onu_id(self, proxy_address): |
| """ |
| Convert the proxy address to the PON-ID and ONU-ID |
| :param proxy_address: (ProxyAddress) |
| :return: (tuple) pon-id, onu-id |
| """ |
| onu_id = proxy_address.onu_id |
| pon_id = self._port_number_to_pon_id(proxy_address.channel_id) |
| |
| return pon_id, onu_id |
| |
| def pon_id_to_port_number(self, pon_id): |
| return pon_id + 1 + 4 # Skip over uninitialized ports |
| |
| def _port_number_to_pon_id(self, port): |
| if self.is_uni_port(port): |
| # Convert to OLT device port |
| port = platform.intf_id_from_uni_port_num(port) |
| |
| return port - 1 - 4 # Skip over uninitialized ports |
| |
| def is_pon_port(self, port): |
| return self._port_number_to_pon_id(port) in self.southbound_ports |
| |
| def is_uni_port(self, port): |
| return OFPP_MAX >= port >= (5 << 11) |
| |
| def get_southbound_port(self, port): |
| pon_id = self._port_number_to_pon_id(port) |
| return self.southbound_ports.get(pon_id, None) |
| |
| def get_northbound_port(self, port): |
| return self.northbound_ports.get(port, None) |
| |
| def get_port_name(self, port, logical_name=False): |
| """ |
| Get the name for a port |
| |
| Port names are used in various ways within and outside of VOLTHA. |
| Typically, the physical port name will be used during device handler conversations |
| with the hardware (REST, NETCONF, ...) while the logical port name is what the |
| outside world (ONOS, SEBA, ...) uses. |
| |
| All ports have a physical port name, but only ports exposed through VOLTHA |
| as a logical port will have a logical port name |
| """ |
| if self.is_nni_port(port): |
| port = self.get_northbound_port(port) |
| return port.logical_port_name if logical_name else port.physical_port_name |
| |
| if self.is_pon_port(port): |
| port = self.get_southbound_port(port) |
| return port.logical_port_name if logical_name else port.physical_port_name |
| |
| if self.is_uni_port(port): |
| return 'uni-{}'.format(port) |
| |
| if self.is_logical_port(port): |
| raise NotImplemented('Logical OpenFlow ports are not supported') |
| |
| def _update_download_status(self, request, download): |
| if download is not None: |
| request.state = download.download_state |
| request.reason = download.failure_reason |
| request.image_state = download.image_state |
| request.additional_info = download.additional_info |
| request.downloaded_bytes = download.downloaded_bytes |
| else: |
| request.state = ImageDownload.DOWNLOAD_UNKNOWN |
| request.reason = ImageDownload.UNKNOWN_ERROR |
| request.image_state = ImageDownload.IMAGE_UNKNOWN |
| request.additional_info = "Download request '{}' not found".format(request.name) |
| request.downloaded_bytes = 0 |
| |
| self.adapter_agent.update_image_download(request) |
| |
| @inlineCallbacks |
| def start_download(self, device, request, done): |
| """ |
| This is called to request downloading a specified image into |
| the standby partition of a device based on a NBI call. |
| |
| :param device: A Voltha.Device object. |
| :param request: A Voltha.ImageDownload object. |
| :param done: (Deferred) Deferred to fire when done |
| :return: (Deferred) Shall be fired to acknowledge the download. |
| """ |
| log.info('image_download', request=request) |
| |
| try: |
| if not self._initial_enable_complete: |
| # Never contacted the device on the initial startup, do 'activate' steps instead |
| raise Exception('Device has not finished initial activation') |
| |
| if request.name in self._downloads: |
| raise Exception("Download request with name '{}' already exists". |
| format(request.name)) |
| try: |
| download = Download.create(self, request, self._download_protocols) |
| |
| except Exception: |
| request.additional_info = 'Download request creation failed due to exception' |
| raise |
| |
| try: |
| self._downloads[download.name] = download |
| self._update_download_status(request, download) |
| done.callback('started') |
| returnValue(done) |
| |
| except Exception: |
| request.additional_info = 'Download request startup failed due to exception' |
| del self._downloads[download.name] |
| download.cancel_download(request) |
| raise |
| |
| except Exception as e: |
| self.log.exception('create', e=e) |
| |
| request.reason = ImageDownload.UNKNOWN_ERROR if self._initial_enable_complete\ |
| else ImageDownload.DEVICE_BUSY |
| request.state = ImageDownload.DOWNLOAD_FAILED |
| if not request.additional_info: |
| request.additional_info = e.message |
| |
| self.adapter_agent.update_image_download(request) |
| |
| # restore admin state to enabled |
| device.admin_state = AdminState.ENABLED |
| yield self.adapter_agent.device_update(device) |
| raise |
| |
| @inlineCallbacks |
| def download_status(self, device, request, done): |
| """ |
| This is called to inquire about a requested image download status based |
| on a NBI call. |
| |
| The adapter is expected to update the DownloadImage DB object with the |
| query result |
| |
| :param device: A Voltha.Device object. |
| :param request: A Voltha.ImageDownload object. |
| :param done: (Deferred) Deferred to fire when done |
| |
| :return: (Deferred) Shall be fired to acknowledge |
| """ |
| log.info('download_status', request=request) |
| download = self._downloads.get(request.name) |
| |
| self._update_download_status(request, download) |
| |
| if request.state not in [ImageDownload.DOWNLOAD_STARTED, |
| ImageDownload.DOWNLOAD_SUCCEEDED, |
| ImageDownload.DOWNLOAD_FAILED]: |
| # restore admin state to enabled |
| device.admin_state = AdminState.ENABLED |
| yield self.adapter_agent.device_update(device) |
| |
| done.callback(request.state) |
| returnValue(done) |
| |
| @inlineCallbacks |
| def cancel_download(self, device, request, done): |
| """ |
| This is called to cancel a requested image download based on a NBI |
| call. The admin state of the device will not change after the |
| download. |
| |
| :param device: A Voltha.Device object. |
| :param request: A Voltha.ImageDownload object. |
| :param done: (Deferred) Deferred to fire when done |
| |
| :return: (Deferred) Shall be fired to acknowledge |
| """ |
| log.info('cancel_download', request=request) |
| |
| download = self._downloads.get(request.name) |
| |
| if download is not None: |
| del self._downloads[request.name] |
| result = download.cancel_download(request) |
| self._update_download_status(request, download) |
| done.callback(result) |
| else: |
| self._update_download_status(request, download) |
| done.errback(KeyError('Download request not found')) |
| |
| if device.admin_state == AdminState.DOWNLOADING_IMAGE: |
| device.admin_state = AdminState.ENABLED |
| yield self.adapter_agent.device_update(device) |
| |
| returnValue(done) |
| |
| @inlineCallbacks |
| def activate_image(self, device, request, done): |
| """ |
| This is called to activate a downloaded image from a standby partition |
| into active partition. |
| |
| Depending on the device implementation, this call may or may not |
| cause device reboot. If no reboot, then a reboot is required to make |
| the activated image running on device |
| |
| :param device: A Voltha.Device object. |
| :param request: A Voltha.ImageDownload object. |
| :param done: (Deferred) Deferred to fire when done |
| |
| :return: (Deferred) OperationResponse object. |
| """ |
| log.info('activate_image', request=request) |
| |
| download = self._downloads.get(request.name) |
| if download is not None: |
| del self._downloads[request.name] |
| result = download.activate_image() |
| self._update_download_status(request, download) |
| done.callback(result) |
| else: |
| self._update_download_status(request, download) |
| done.errback(KeyError('Download request not found')) |
| |
| # restore admin state to enabled |
| device.admin_state = AdminState.ENABLED |
| yield self.adapter_agent.device_update(device) |
| returnValue(done) |
| |
| @inlineCallbacks |
| def revert_image(self, device, request, done): |
| """ |
| This is called to deactivate the specified image at active partition, |
| and revert to previous image at standby partition. |
| |
| Depending on the device implementation, this call may or may not |
| cause device reboot. If no reboot, then a reboot is required to |
| make the previous image running on device |
| |
| :param device: A Voltha.Device object. |
| :param request: A Voltha.ImageDownload object. |
| :param done: (Deferred) Deferred to fire when done |
| |
| :return: (Deferred) OperationResponse object. |
| """ |
| log.info('revert_image', request=request) |
| |
| download = self._downloads.get(request.name) |
| if download is not None: |
| del self._downloads[request.name] |
| result = download.revert_image() |
| self._update_download_status(request, download) |
| done.callback(result) |
| else: |
| self._update_download_status(request, download) |
| done.errback(KeyError('Download request not found')) |
| |
| # restore admin state to enabled |
| device.admin_state = AdminState.ENABLED |
| yield self.adapter_agent.device_update(device) |
| returnValue(done) |
| |
| def add_onu_device(self, pon_id, onu_id, serial_number): |
| onu_device = self.adapter_agent.get_child_device(self.device_id, |
| serial_number=serial_number) |
| if onu_device is not None: |
| return onu_device |
| |
| try: |
| # NOTE - channel_id of onu is set to pon_id |
| pon_port = self.pon_id_to_port_number(pon_id) |
| proxy_address = Device.ProxyAddress(device_id=self.device_id, |
| channel_id=pon_port, |
| onu_id=onu_id, |
| onu_session_id=onu_id) |
| |
| self.log.debug("added-onu", port_no=pon_id, |
| onu_id=onu_id, serial_number=serial_number, |
| proxy_address=proxy_address) |
| |
| self.adapter_agent.add_onu_device( |
| parent_device_id=self.device_id, |
| parent_port_no=pon_port, |
| vendor_id=serial_number[:4], |
| proxy_address=proxy_address, |
| root=True, |
| serial_number=serial_number, |
| admin_state=AdminState.ENABLED, |
| ) |
| |
| except Exception as e: |
| self.log.exception('onu-activation-failed', e=e) |
| return None |
| |
| def setup_onu_tech_profile(self, pon_id, onu_id, logical_port_number): |
| # Send ONU Adapter related tech profile information. |
| self.log.debug('add-tech-profile-info') |
| |
| uni_id = self.platform.uni_id_from_uni_port(logical_port_number) |
| parent_port_no = self.pon_id_to_port_number(pon_id) |
| onu_device = self.adapter_agent.get_child_device(self.device_id, |
| onu_id=onu_id, |
| parent_port_no=parent_port_no) |
| |
| ofp_port_name, ofp_port_no = self.get_ofp_port_name(pon_id, onu_id, |
| logical_port_number) |
| if ofp_port_name is None: |
| self.log.error("port-name-not-found") |
| return |
| |
| tp_path = self.get_tp_path(pon_id, ofp_port_name) |
| |
| self.log.debug('Load-tech-profile-request-to-onu-handler', tp_path=tp_path) |
| |
| msg = {'proxy_address': onu_device.proxy_address, 'uni_id': uni_id, |
| 'event': 'download_tech_profile', 'event_data': tp_path} |
| |
| # Send the event message to the ONU adapter |
| self.adapter_agent.publish_inter_adapter_message(onu_device.id, msg) |