Chip Boling | f5af85d | 2019-02-12 15:36:17 -0600 | [diff] [blame] | 1 | # Copyright 2017-present Adtran, Inc. |
| 2 | # |
| 3 | # Licensed under the Apache License, Version 2.0 (the "License"); |
| 4 | # you may not use this file except in compliance with the License. |
| 5 | # You may obtain a copy of the License at |
| 6 | # |
| 7 | # http://www.apache.org/licenses/LICENSE-2.0 |
| 8 | # |
| 9 | # Unless required by applicable law or agreed to in writing, software |
| 10 | # distributed under the License is distributed on an "AS IS" BASIS, |
| 11 | # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| 12 | # See the License for the specific language governing permissions and |
| 13 | # limitations under the License. |
| 14 | """ |
| 15 | Adtran generic VOLTHA device handler |
| 16 | """ |
| 17 | import argparse |
| 18 | import datetime |
| 19 | import shlex |
| 20 | import time |
| 21 | |
| 22 | import structlog |
| 23 | from twisted.internet import reactor, defer |
| 24 | from twisted.internet.defer import inlineCallbacks, returnValue |
| 25 | from twisted.python.failure import Failure |
| 26 | |
| 27 | from adapters.adtran_common.net.adtran_netconf import AdtranNetconfClient |
| 28 | from adapters.adtran_common.net.adtran_rest import AdtranRestClient |
| 29 | from pyvoltha.protos import third_party |
| 30 | from pyvoltha.protos.common_pb2 import OperStatus, AdminState, ConnectStatus |
| 31 | from pyvoltha.protos.logical_device_pb2 import LogicalDevice |
| 32 | from pyvoltha.protos.openflow_13_pb2 import ofp_desc, ofp_switch_features, OFPC_PORT_STATS, \ |
| 33 | OFPC_GROUP_STATS, OFPC_TABLE_STATS, OFPC_FLOW_STATS |
| 34 | from pyvoltha.adapters.extensions.alarms.adapter_alarms import AdapterAlarms |
| 35 | from pyvoltha.adapters.extensions.kpi.olt.olt_pm_metrics import OltPmMetrics |
| 36 | from pyvoltha.common.utils.asleep import asleep |
| 37 | from flow.flow_tables import DeviceFlows, DownstreamFlows |
| 38 | |
| 39 | _ = third_party |
| 40 | |
| 41 | DEFAULT_MULTICAST_VLAN = 4000 |
| 42 | BROADCOM_UNTAGGED_VLAN = 4091 |
| 43 | DEFAULT_UTILITY_VLAN = BROADCOM_UNTAGGED_VLAN |
| 44 | |
| 45 | _DEFAULT_RESTCONF_USERNAME = "" |
| 46 | _DEFAULT_RESTCONF_PASSWORD = "" |
| 47 | _DEFAULT_RESTCONF_PORT = 8081 |
| 48 | |
| 49 | _DEFAULT_NETCONF_USERNAME = "" |
| 50 | _DEFAULT_NETCONF_PASSWORD = "" |
| 51 | _DEFAULT_NETCONF_PORT = 830 |
| 52 | |
| 53 | _STARTUP_RETRY_TIMEOUT = 5 # 5 seconds delay after activate failed before we |
| 54 | _DEFAULT_RESOURCE_MGR_KEY = "adtran" |
| 55 | |
| 56 | |
| 57 | class AdtranDeviceHandler(object): |
| 58 | """ |
| 59 | A device that supports the ADTRAN RESTCONF protocol for communications |
| 60 | with a VOLTHA/VANILLA managed device. |
| 61 | Port numbering guidelines for Adtran OLT devices. Derived classes may augment |
| 62 | the numbering scheme below as needed. |
| 63 | |
| 64 | - Reserve port 0 for the CPU capture port. All ports to/from this port should |
| 65 | be related to messages destined to/from the OpenFlow controller. |
| 66 | |
| 67 | - Begin numbering northbound ports (network facing) at port 1 contiguously. |
| 68 | Consider the northbound ports to typically be the highest speed uplinks. |
| 69 | If these ports are removable or provided by one or more slots in a chassis |
| 70 | subsystem, still reserve the appropriate amount of port numbers whether they |
| 71 | are populated or not. |
| 72 | |
| 73 | - Number southbound ports (customer facing) ports next starting at the next |
| 74 | available port number. If chassis based, follow the same rules as northbound |
| 75 | ports and reserve enough port numbers. |
| 76 | |
| 77 | - Number any out-of-band management ports (if any) last. It will be up to the |
| 78 | Device Adapter developer whether to expose these to openflow or not. If you do |
| 79 | not expose them, but do have the ports, still reserve the appropriate number of |
| 80 | port numbers just in case. |
| 81 | """ |
| 82 | # HTTP shortcuts |
| 83 | HELLO_URI = '/restconf/adtran-hello:hello' |
| 84 | |
| 85 | # RPC XML shortcuts |
| 86 | RESTART_RPC = '<system-restart xmlns="urn:ietf:params:xml:ns:yang:ietf-system"/>' |
| 87 | |
| 88 | def __init__(self, **kwargs): |
| 89 | from net.pio_zmq import DEFAULT_PIO_TCP_PORT |
| 90 | from net.pon_zmq import DEFAULT_PON_AGENT_TCP_PORT |
| 91 | |
| 92 | super(AdtranDeviceHandler, self).__init__() |
| 93 | |
| 94 | adapter = kwargs['adapter'] |
| 95 | device_id = kwargs['device-id'] |
| 96 | timeout = kwargs.get('timeout', 20) |
| 97 | |
| 98 | self.adapter = adapter |
| 99 | self.adapter_agent = adapter.adapter_agent |
| 100 | self.device_id = device_id |
| 101 | self.log = structlog.get_logger(device_id=device_id) |
| 102 | self.startup = None # Startup/reboot deferred |
| 103 | self.channel = None # Proxy messaging channel with 'send' method |
| 104 | self.logical_device_id = None |
| 105 | self.pm_metrics = None |
| 106 | self.alarms = None |
| 107 | self.multicast_vlans = [DEFAULT_MULTICAST_VLAN] |
| 108 | self.utility_vlan = DEFAULT_UTILITY_VLAN |
| 109 | self.mac_address = '00:13:95:00:00:00' |
| 110 | self._rest_support = None |
| 111 | self._initial_enable_complete = False |
| 112 | self.resource_mgr = None |
| 113 | self.tech_profiles = None # dict(): intf_id -> ResourceMgr.TechProfile |
| 114 | |
| 115 | # Northbound and Southbound ports |
| 116 | self.northbound_ports = {} # port number -> Port |
| 117 | self.southbound_ports = {} # port number -> Port (For PON, use pon-id as key) |
| 118 | # self.management_ports = {} # port number -> Port TODO: Not currently supported |
| 119 | |
| 120 | self.num_northbound_ports = None |
| 121 | self.num_southbound_ports = None |
| 122 | # self.num_management_ports = None |
| 123 | |
| 124 | self.ip_address = None |
| 125 | self.host_and_port = None |
| 126 | self.timeout = timeout |
| 127 | self.restart_failure_timeout = 5 * 60 # 5 Minute timeout |
| 128 | |
| 129 | # REST Client |
| 130 | self.rest_port = _DEFAULT_RESTCONF_PORT |
| 131 | self.rest_username = _DEFAULT_RESTCONF_USERNAME |
| 132 | self.rest_password = _DEFAULT_RESTCONF_PASSWORD |
| 133 | self._rest_client = None |
| 134 | |
| 135 | # NETCONF Client |
| 136 | self.netconf_port = _DEFAULT_NETCONF_PORT |
| 137 | self.netconf_username = _DEFAULT_NETCONF_USERNAME |
| 138 | self.netconf_password = _DEFAULT_NETCONF_PASSWORD |
| 139 | self._netconf_client = None |
| 140 | |
| 141 | # Flow entries |
| 142 | self.upstream_flows = DeviceFlows() |
| 143 | self.downstream_flows = DownstreamFlows() |
| 144 | |
| 145 | self.max_nni_ports = 1 # TODO: This is a VOLTHA imposed limit in 'flow_decomposer.py |
| 146 | # and logical_device_agent.py |
| 147 | |
| 148 | self.resource_manager_key = _DEFAULT_RESOURCE_MGR_KEY |
| 149 | # OMCI ZMQ Channel |
| 150 | self.pon_agent_port = DEFAULT_PON_AGENT_TCP_PORT |
| 151 | self.pio_port = DEFAULT_PIO_TCP_PORT |
| 152 | |
| 153 | # Heartbeat support |
| 154 | self.heartbeat_count = 0 |
| 155 | self.heartbeat_miss = 0 |
| 156 | self.heartbeat_interval = 2 # TODO: Decrease before release or any scale testing |
| 157 | self.heartbeat_failed_limit = 3 |
| 158 | self.heartbeat_timeout = 5 |
| 159 | self.heartbeat = None |
| 160 | self.heartbeat_last_reason = '' |
| 161 | |
| 162 | # Virtualized OLT Support |
| 163 | self.is_virtual_olt = False |
| 164 | |
| 165 | # Installed flows |
| 166 | self._evcs = {} # Flow ID/name -> FlowEntry |
| 167 | |
| 168 | def _delete_logical_device(self): |
| 169 | ldi, self.logical_device_id = self.logical_device_id, None |
| 170 | |
| 171 | if ldi is None: |
| 172 | return |
| 173 | |
| 174 | self.log.debug('delete-logical-device', ldi=ldi) |
| 175 | |
| 176 | logical_device = self.adapter_agent.get_logical_device(ldi) |
| 177 | self.adapter_agent.delete_logical_device(logical_device) |
| 178 | |
| 179 | device = self.adapter_agent.get_device(self.device_id) |
| 180 | device.parent_id = '' |
| 181 | |
| 182 | # Update the logical device mapping |
| 183 | if ldi in self.adapter.logical_device_id_to_root_device_id: |
| 184 | del self.adapter.logical_device_id_to_root_device_id[ldi] |
| 185 | |
| 186 | def __del__(self): |
| 187 | # Kill any startup or heartbeat defers |
| 188 | |
| 189 | d, self.startup = self.startup, None |
| 190 | h, self.heartbeat = self.heartbeat, None |
| 191 | |
| 192 | if d is not None and not d.called: |
| 193 | d.cancel() |
| 194 | |
| 195 | if h is not None and not h.called: |
| 196 | h.cancel() |
| 197 | |
| 198 | # Remove the logical device |
| 199 | self._delete_logical_device() |
| 200 | |
| 201 | self.northbound_ports.clear() |
| 202 | self.southbound_ports.clear() |
| 203 | |
| 204 | def __str__(self): |
| 205 | return "AdtranDeviceHandler: {}".format(self.ip_address) |
| 206 | |
| 207 | @property |
| 208 | def netconf_client(self): |
| 209 | return self._netconf_client |
| 210 | |
| 211 | @property |
| 212 | def rest_client(self): |
| 213 | return self._rest_client |
| 214 | |
| 215 | @property |
| 216 | def evcs(self): |
| 217 | return list(self._evcs.values()) |
| 218 | |
| 219 | def add_evc(self, evc): |
| 220 | if self._evcs is not None and evc.name not in self._evcs: |
| 221 | self._evcs[evc.name] = evc |
| 222 | |
| 223 | def remove_evc(self, evc): |
| 224 | if self._evcs is not None and evc.name in self._evcs: |
| 225 | del self._evcs[evc.name] |
| 226 | |
| 227 | def parse_provisioning_options(self, device): |
| 228 | if device.ipv4_address: |
| 229 | self.ip_address = device.ipv4_address |
| 230 | self.host_and_port = '{}:{}'.format(self.ip_address, |
| 231 | self.netconf_port) |
| 232 | elif device.host_and_port: |
| 233 | self.host_and_port = device.host_and_port.split(":") |
| 234 | self.ip_address = self.host_and_port[0] |
| 235 | self.netconf_port = int(self.host_and_port[1]) |
| 236 | self.adapter_agent.update_device(device) |
| 237 | |
| 238 | else: |
| 239 | self.activate_failed(device, 'No IP_address field provided') |
| 240 | |
| 241 | ############################################################# |
| 242 | # Now optional parameters |
| 243 | def check_tcp_port(value): |
| 244 | ivalue = int(value) |
| 245 | if ivalue <= 0 or ivalue > 65535: |
| 246 | raise argparse.ArgumentTypeError("%s is a not a valid port number" % value) |
| 247 | return ivalue |
| 248 | |
| 249 | def check_vid(value): |
| 250 | ivalue = int(value) |
| 251 | if ivalue < 1 or ivalue > 4094: |
| 252 | raise argparse.ArgumentTypeError("Valid VLANs are 1..4094") |
| 253 | return ivalue |
| 254 | |
| 255 | parser = argparse.ArgumentParser(description='Adtran Device Adapter') |
| 256 | parser.add_argument('--nc_username', '-u', action='store', default=_DEFAULT_NETCONF_USERNAME, |
| 257 | help='NETCONF username') |
| 258 | parser.add_argument('--nc_password', '-p', action='store', default=_DEFAULT_NETCONF_PASSWORD, |
| 259 | help='NETCONF Password') |
| 260 | parser.add_argument('--nc_port', '-t', action='store', default=_DEFAULT_NETCONF_PORT, |
| 261 | type=check_tcp_port, help='NETCONF TCP Port') |
| 262 | parser.add_argument('--rc_username', '-U', action='store', default=_DEFAULT_RESTCONF_USERNAME, |
| 263 | help='REST username') |
| 264 | parser.add_argument('--rc_password', '-P', action='store', default=_DEFAULT_RESTCONF_PASSWORD, |
| 265 | help='REST Password') |
| 266 | parser.add_argument('--rc_port', '-T', action='store', default=_DEFAULT_RESTCONF_PORT, |
| 267 | type=check_tcp_port, help='RESTCONF TCP Port') |
| 268 | parser.add_argument('--zmq_port', '-z', action='store', default=DEFAULT_PON_AGENT_TCP_PORT, |
| 269 | type=check_tcp_port, help='PON Agent ZeroMQ Port') |
| 270 | parser.add_argument('--pio_port', '-Z', action='store', default=DEFAULT_PIO_TCP_PORT, |
| 271 | type=check_tcp_port, help='PIO Service ZeroMQ Port') |
| 272 | parser.add_argument('--multicast_vlan', '-M', action='store', |
| 273 | default='{}'.format(DEFAULT_MULTICAST_VLAN), |
| 274 | help='Multicast VLAN'), |
| 275 | parser.add_argument('--utility_vlan', '-B', action='store', |
| 276 | default='{}'.format(DEFAULT_UTILITY_VLAN), |
| 277 | type=check_vid, help='VLAN for Controller based upstream flows from ONUs') |
| 278 | parser.add_argument('--resource_mgr_key', '-o', action='store', |
| 279 | default=_DEFAULT_RESOURCE_MGR_KEY, |
| 280 | help='OLT Type to look up associated resource manager configuration') |
| 281 | try: |
| 282 | args = parser.parse_args(shlex.split(device.extra_args)) |
| 283 | |
| 284 | # May have multiple multicast VLANs |
| 285 | self.multicast_vlans = [int(vid.strip()) for vid in args.multicast_vlan.split(',')] |
| 286 | |
| 287 | self.netconf_username = args.nc_username |
| 288 | self.netconf_password = args.nc_password |
| 289 | self.netconf_port = args.nc_port |
| 290 | |
| 291 | self.rest_username = args.rc_username |
| 292 | self.rest_password = args.rc_password |
| 293 | self.rest_port = args.rc_port |
| 294 | |
| 295 | self.pon_agent_port = args.zmq_port |
| 296 | self.pio_port = args.pio_port |
| 297 | self.resource_manager_key = args.resource_mgr_key |
| 298 | |
| 299 | if not self.rest_username: |
| 300 | self.rest_username = 'NDE0NDRkNDk0ZQ==\n'. \ |
| 301 | decode('base64').decode('hex') |
| 302 | if not self.rest_password: |
| 303 | self.rest_password = 'NTA0MTUzNTM1NzRmNTI0NA==\n'. \ |
| 304 | decode('base64').decode('hex') |
| 305 | if not self.netconf_username: |
| 306 | self.netconf_username = 'Njg3Mzc2NzI2ZjZmNzQ=\n'. \ |
| 307 | decode('base64').decode('hex') |
| 308 | if not self.netconf_password: |
| 309 | self.netconf_password = 'NDI0ZjUzNDM0Zg==\n'. \ |
| 310 | decode('base64').decode('hex') |
| 311 | |
| 312 | except argparse.ArgumentError as e: |
| 313 | self.activate_failed(device, |
| 314 | 'Invalid arguments: {}'.format(e.message), |
| 315 | reachable=False) |
| 316 | except Exception as e: |
| 317 | self.log.exception('option_parsing_error: {}'.format(e.message)) |
| 318 | |
| 319 | @inlineCallbacks |
| 320 | def activate(self, done_deferred, reconciling): |
| 321 | """ |
| 322 | Activate the OLT device |
| 323 | |
| 324 | :param done_deferred: (Deferred) Deferred to fire when done |
| 325 | :param reconciling: If True, this adapter is taking over for a previous adapter |
| 326 | for an existing OLT |
| 327 | """ |
| 328 | self.log.info('AdtranDeviceHandler.activating', reconciling=reconciling) |
| 329 | |
| 330 | if self.logical_device_id is None: |
| 331 | device = self.adapter_agent.get_device(self.device_id) |
| 332 | |
| 333 | try: |
| 334 | # Parse our command line options for this device |
| 335 | self.parse_provisioning_options(device) |
| 336 | |
| 337 | ############################################################################ |
| 338 | # Currently, only virtual OLT (pizzabox) is supported |
| 339 | # self.is_virtual_olt = Add test for MOCK Device if we want to support it |
| 340 | |
| 341 | ############################################################################ |
| 342 | # Start initial discovery of NETCONF support (if any) |
| 343 | try: |
| 344 | device.reason = 'establishing NETCONF connection' |
| 345 | self.adapter_agent.update_device(device) |
| 346 | |
| 347 | self.startup = self.make_netconf_connection() |
| 348 | yield self.startup |
| 349 | |
| 350 | except Exception as e: |
| 351 | self.log.exception('netconf-connection', e=e) |
| 352 | returnValue(self.restart_activate(done_deferred, reconciling)) |
| 353 | |
| 354 | ############################################################################ |
| 355 | # Update access information on network device for full protocol support |
| 356 | try: |
| 357 | device.reason = 'device networking validation' |
| 358 | self.adapter_agent.update_device(device) |
| 359 | self.startup = self.ready_network_access() |
| 360 | yield self.startup |
| 361 | |
| 362 | except Exception as e: |
| 363 | self.log.exception('network-setup', e=e) |
| 364 | returnValue(self.restart_activate(done_deferred, reconciling)) |
| 365 | |
| 366 | ############################################################################ |
| 367 | # Restconf setup |
| 368 | try: |
| 369 | device.reason = 'establishing RESTConf connections' |
| 370 | self.adapter_agent.update_device(device) |
| 371 | self.startup = self.make_restconf_connection() |
| 372 | yield self.startup |
| 373 | |
| 374 | except Exception as e: |
| 375 | self.log.exception('restconf-setup', e=e) |
| 376 | returnValue(self.restart_activate(done_deferred, reconciling)) |
| 377 | |
| 378 | ############################################################################ |
| 379 | # Get the device Information |
| 380 | if reconciling: |
| 381 | device.connect_status = ConnectStatus.REACHABLE |
| 382 | self.adapter_agent.update_device(device) |
| 383 | else: |
| 384 | try: |
| 385 | device.reason = 'retrieving device information' |
| 386 | self.adapter_agent.update_device(device) |
| 387 | self.startup = self.get_device_info(device) |
| 388 | results = yield self.startup |
| 389 | |
| 390 | device.model = results.get('model', 'unknown') |
| 391 | device.hardware_version = results.get('hardware_version', 'unknown') |
| 392 | device.firmware_version = results.get('firmware_version', 'unknown') |
| 393 | device.serial_number = results.get('serial_number', 'unknown') |
| 394 | device.images.image.extend(results.get('software-images', [])) |
| 395 | |
| 396 | device.root = True |
| 397 | device.vendor = results.get('vendor', 'Adtran Inc.') |
| 398 | device.connect_status = ConnectStatus.REACHABLE |
| 399 | self.adapter_agent.update_device(device) |
| 400 | |
| 401 | except Exception as e: |
| 402 | self.log.exception('device-info', e=e) |
| 403 | returnValue(self.restart_activate(done_deferred, reconciling)) |
| 404 | |
| 405 | try: |
| 406 | # Enumerate and create Northbound NNI interfaces |
| 407 | device.reason = 'enumerating northbound interfaces' |
| 408 | self.adapter_agent.update_device(device) |
| 409 | self.startup = self.enumerate_northbound_ports(device) |
| 410 | results = yield self.startup |
| 411 | |
| 412 | self.startup = self.process_northbound_ports(device, results) |
| 413 | yield self.startup |
| 414 | |
| 415 | device.reason = 'adding northbound interfaces to adapter' |
| 416 | self.adapter_agent.update_device(device) |
| 417 | |
| 418 | if not reconciling: |
| 419 | for port in self.northbound_ports.itervalues(): |
| 420 | self.adapter_agent.add_port(device.id, port.get_port()) |
| 421 | |
| 422 | except Exception as e: |
| 423 | self.log.exception('NNI-enumeration', e=e) |
| 424 | returnValue(self.restart_activate(done_deferred, reconciling)) |
| 425 | |
| 426 | try: |
| 427 | # Enumerate and create southbound interfaces |
| 428 | device.reason = 'enumerating southbound interfaces' |
| 429 | self.adapter_agent.update_device(device) |
| 430 | self.startup = self.enumerate_southbound_ports(device) |
| 431 | results = yield self.startup |
| 432 | |
| 433 | self.startup = self.process_southbound_ports(device, results) |
| 434 | yield self.startup |
| 435 | |
| 436 | device.reason = 'adding southbound interfaces to adapter' |
| 437 | self.adapter_agent.update_device(device) |
| 438 | |
| 439 | if not reconciling: |
| 440 | for port in self.southbound_ports.itervalues(): |
| 441 | self.adapter_agent.add_port(device.id, port.get_port()) |
| 442 | |
| 443 | except Exception as e: |
| 444 | self.log.exception('PON_enumeration', e=e) |
| 445 | returnValue(self.restart_activate(done_deferred, reconciling)) |
| 446 | |
| 447 | # Initialize resource manager |
| 448 | self.initialize_resource_manager() |
| 449 | |
| 450 | if reconciling: |
| 451 | if device.admin_state == AdminState.ENABLED: |
| 452 | if device.parent_id: |
| 453 | self.logical_device_id = device.parent_id |
| 454 | self.adapter_agent.reconcile_logical_device(device.parent_id) |
| 455 | else: |
| 456 | self.log.info('no-logical-device-set') |
| 457 | |
| 458 | # Reconcile child devices |
| 459 | self.adapter_agent.reconcile_child_devices(device.id) |
| 460 | ld_initialized = self.adapter_agent.get_logical_device() |
| 461 | assert device.parent_id == ld_initialized.id, \ |
| 462 | 'parent ID not Logical device ID' |
| 463 | |
| 464 | else: |
| 465 | # Complete activation by setting up logical device for this OLT and saving |
| 466 | # off the devices parent_id |
| 467 | ld_initialized = self.create_logical_device(device) |
| 468 | |
| 469 | ############################################################################ |
| 470 | # Setup PM configuration for this device |
| 471 | if self.pm_metrics is None: |
| 472 | try: |
| 473 | device.reason = 'setting up Performance Monitoring configuration' |
| 474 | self.adapter_agent.update_device(device) |
| 475 | |
| 476 | kwargs = { |
| 477 | 'nni-ports': self.northbound_ports.values(), |
| 478 | 'pon-ports': self.southbound_ports.values() |
| 479 | } |
| 480 | self.pm_metrics = OltPmMetrics(self.adapter_agent, self.device_id, |
| 481 | ld_initialized.id, grouped=True, |
| 482 | freq_override=False, **kwargs) |
| 483 | |
| 484 | pm_config = self.pm_metrics.make_proto() |
| 485 | self.log.debug("initial-pm-config", pm_config=pm_config) |
| 486 | self.adapter_agent.update_device_pm_config(pm_config, init=True) |
| 487 | |
| 488 | except Exception as e: |
| 489 | self.log.exception('pm-setup', e=e) |
| 490 | self.activate_failed(device, e.message, reachable=False) |
| 491 | |
| 492 | ############################################################################ |
| 493 | # Set the ports in a known good initial state |
| 494 | if not reconciling: |
| 495 | device.reason = 'setting device to a known initial state' |
| 496 | self.adapter_agent.update_device(device) |
| 497 | try: |
| 498 | for port in self.northbound_ports.itervalues(): |
| 499 | self.startup = yield port.reset() |
| 500 | |
| 501 | for port in self.southbound_ports.itervalues(): |
| 502 | self.startup = yield port.reset() |
| 503 | |
| 504 | except Exception as e: |
| 505 | self.log.exception('port-reset', e=e) |
| 506 | returnValue(self.restart_activate(done_deferred, reconciling)) |
| 507 | |
| 508 | ############################################################################ |
| 509 | # Create logical ports for all southbound and northbound interfaces |
| 510 | try: |
| 511 | device.reason = 'creating logical ports' |
| 512 | self.adapter_agent.update_device(device) |
| 513 | self.startup = self.create_logical_ports(device, ld_initialized, reconciling) |
| 514 | yield self.startup |
| 515 | |
| 516 | except Exception as e: |
| 517 | self.log.exception('logical-port', e=e) |
| 518 | returnValue(self.restart_activate(done_deferred, reconciling)) |
| 519 | |
| 520 | ############################################################################ |
| 521 | # Setup Alarm handler |
| 522 | device.reason = 'setting up adapter alarms' |
| 523 | self.adapter_agent.update_device(device) |
| 524 | |
| 525 | self.alarms = AdapterAlarms(self.adapter_agent, device.id, ld_initialized.id) |
| 526 | |
| 527 | ############################################################################ |
| 528 | # Register for ONU detection |
| 529 | # self.adapter_agent.register_for_onu_detect_state(device.id) |
| 530 | # Complete device specific steps |
| 531 | try: |
| 532 | self.log.debug('device-activation-procedures') |
| 533 | device.reason = 'performing model specific activation procedures' |
| 534 | self.adapter_agent.update_device(device) |
| 535 | self.startup = self.complete_device_specific_activation(device, reconciling) |
| 536 | yield self.startup |
| 537 | |
| 538 | except Exception as e: |
| 539 | self.log.exception('device-activation-procedures', e=e) |
| 540 | returnValue(self.restart_activate(done_deferred, reconciling)) |
| 541 | |
| 542 | # Schedule the heartbeat for the device |
| 543 | self.log.debug('starting-heartbeat') |
| 544 | self.start_heartbeat(delay=10) |
| 545 | |
| 546 | device = self.adapter_agent.get_device(device.id) |
| 547 | device.parent_id = ld_initialized.id |
| 548 | device.oper_status = OperStatus.ACTIVE |
| 549 | device.reason = '' |
| 550 | self.adapter_agent.update_device(device) |
| 551 | self.logical_device_id = ld_initialized.id |
| 552 | |
| 553 | # Start collecting stats from the device after a brief pause |
| 554 | reactor.callLater(10, self.pm_metrics.start_collector) |
| 555 | |
| 556 | # Signal completion |
| 557 | self._initial_enable_complete = True |
| 558 | self.log.info('activated') |
| 559 | |
| 560 | except Exception as e: |
| 561 | self.log.exception('activate', e=e) |
| 562 | if done_deferred is not None: |
| 563 | done_deferred.errback(e) |
| 564 | |
| 565 | if done_deferred is not None: |
| 566 | done_deferred.callback('activated') |
| 567 | |
| 568 | returnValue('activated') |
| 569 | |
| 570 | def restart_activate(self, done_deferred, reconciling): |
| 571 | """ |
| 572 | Startup activation failed, pause a short period of time and retry |
| 573 | |
| 574 | :param done_deferred: (deferred) Deferred to fire upon completion of activation |
| 575 | :param reconciling: (bool) If true, we are reconciling after moving to a new vCore |
| 576 | """ |
| 577 | d, self.startup = self.startup, None |
| 578 | try: |
| 579 | if d is not None and not d.called: |
| 580 | d.cancel() |
| 581 | except: |
| 582 | pass |
| 583 | device = self.adapter_agent.get_device(self.device_id) |
| 584 | device.reason = 'Failed during {}, retrying'.format(device.reason) |
| 585 | self.adapter_agent.update_device(device) |
| 586 | self.startup = reactor.callLater(_STARTUP_RETRY_TIMEOUT, self.activate, |
| 587 | done_deferred, reconciling) |
| 588 | return 'retrying' |
| 589 | |
| 590 | @inlineCallbacks |
| 591 | def ready_network_access(self): |
| 592 | # Override in device specific class if needed |
| 593 | returnValue('nop') |
| 594 | |
| 595 | def activate_failed(self, device, reason, reachable=True): |
| 596 | """ |
| 597 | Activation process (adopt_device) has failed. |
| 598 | |
| 599 | :param device: A voltha.Device object, with possible device-type |
| 600 | specific extensions. Such extensions shall be described as part of |
| 601 | the device type specification returned by device_types(). |
| 602 | :param reason: (string) failure reason |
| 603 | :param reachable: (boolean) Flag indicating if device may be reachable |
| 604 | via RESTConf or NETConf even after this failure. |
| 605 | """ |
| 606 | device.oper_status = OperStatus.FAILED |
| 607 | if not reachable: |
| 608 | device.connect_status = ConnectStatus.UNREACHABLE |
| 609 | |
| 610 | device.reason = reason |
| 611 | self.adapter_agent.update_device(device) |
| 612 | raise Exception('Failed to activate OLT: {}'.format(device.reason)) |
| 613 | |
| 614 | @inlineCallbacks |
| 615 | def make_netconf_connection(self, connect_timeout=None, |
| 616 | close_existing_client=False): |
| 617 | |
| 618 | if close_existing_client and self._netconf_client is not None: |
| 619 | try: |
| 620 | yield self._netconf_client.close() |
| 621 | except: |
| 622 | pass |
| 623 | self._netconf_client = None |
| 624 | |
| 625 | client = self._netconf_client |
| 626 | |
| 627 | if client is None: |
| 628 | if not self.is_virtual_olt: |
| 629 | client = AdtranNetconfClient(self.ip_address, |
| 630 | self.netconf_port, |
| 631 | self.netconf_username, |
| 632 | self.netconf_password, |
| 633 | self.timeout) |
| 634 | else: |
| 635 | from python.adapters.adtran.adtran_common.net.mock_netconf_client import MockNetconfClient |
| 636 | client = MockNetconfClient(self.ip_address, |
| 637 | self.netconf_port, |
| 638 | self.netconf_username, |
| 639 | self.netconf_password, |
| 640 | self.timeout) |
| 641 | if client.connected: |
| 642 | self._netconf_client = client |
| 643 | returnValue(True) |
| 644 | |
| 645 | timeout = connect_timeout or self.timeout |
| 646 | |
| 647 | try: |
| 648 | request = client.connect(timeout) |
| 649 | results = yield request |
| 650 | self._netconf_client = client |
| 651 | returnValue(results) |
| 652 | |
| 653 | except Exception as e: |
| 654 | self.log.exception('Failed to create NETCONF Client', e=e) |
| 655 | self._netconf_client = None |
| 656 | raise |
| 657 | |
| 658 | @inlineCallbacks |
| 659 | def make_restconf_connection(self, get_timeout=None): |
| 660 | client = self._rest_client |
| 661 | |
| 662 | if client is None: |
| 663 | client = AdtranRestClient(self.ip_address, |
| 664 | self.rest_port, |
| 665 | self.rest_username, |
| 666 | self.rest_password, |
| 667 | self.timeout) |
| 668 | |
| 669 | timeout = get_timeout or self.timeout |
| 670 | |
| 671 | try: |
| 672 | request = client.request('GET', self.HELLO_URI, name='hello', timeout=timeout) |
| 673 | results = yield request |
| 674 | if isinstance(results, dict) and 'module-info' in results: |
| 675 | self._rest_client = client |
| 676 | returnValue(results) |
| 677 | else: |
| 678 | from twisted.internet.error import ConnectError |
| 679 | self._rest_client = None |
| 680 | raise ConnectError(string='Results received but unexpected data type or contents') |
| 681 | except Exception: |
| 682 | self._rest_client = None |
| 683 | raise |
| 684 | |
| 685 | def create_logical_device(self, device): |
| 686 | version = device.images.image[0].version |
| 687 | |
| 688 | ld = LogicalDevice( |
| 689 | # NOTE: not setting id and datapath_id will let the adapter agent pick id |
| 690 | desc=ofp_desc(mfr_desc='VOLTHA Project', |
| 691 | hw_desc=device.hardware_version, |
| 692 | sw_desc=version, |
| 693 | serial_num=device.serial_number, |
| 694 | dp_desc='n/a'), |
| 695 | switch_features=ofp_switch_features(n_buffers=256, |
| 696 | n_tables=2, |
| 697 | capabilities=( |
| 698 | OFPC_FLOW_STATS | |
| 699 | OFPC_TABLE_STATS | |
| 700 | OFPC_GROUP_STATS | |
| 701 | OFPC_PORT_STATS)), |
| 702 | root_device_id=device.id) |
| 703 | |
| 704 | ld_initialized = self.adapter_agent.create_logical_device(ld, |
| 705 | dpid=self.mac_address) |
| 706 | return ld_initialized |
| 707 | |
| 708 | @inlineCallbacks |
| 709 | def create_logical_ports(self, device, ld_initialized, reconciling): |
| 710 | if not reconciling: |
| 711 | # Add the ports to the logical device |
| 712 | |
| 713 | for port in self.northbound_ports.itervalues(): |
| 714 | lp = port.get_logical_port() |
| 715 | if lp is not None: |
| 716 | self.adapter_agent.add_logical_port(ld_initialized.id, lp) |
| 717 | |
| 718 | for port in self.southbound_ports.itervalues(): |
| 719 | lp = port.get_logical_port() |
| 720 | if lp is not None: |
| 721 | self.adapter_agent.add_logical_port(ld_initialized.id, lp) |
| 722 | |
| 723 | # Clean up all EVCs, EVC maps and ACLs (exceptions are ok) |
| 724 | try: |
| 725 | from flow.evc import EVC |
| 726 | self.startup = yield EVC.remove_all(self.netconf_client) |
| 727 | from flow.utility_evc import UtilityEVC |
| 728 | self.startup = yield UtilityEVC.remove_all(self.netconf_client) |
| 729 | |
| 730 | except Exception as e: |
| 731 | self.log.exception('evc-cleanup', e=e) |
| 732 | |
| 733 | try: |
| 734 | from flow.evc_map import EVCMap |
| 735 | self.startup = yield EVCMap.remove_all(self.netconf_client) |
| 736 | |
| 737 | except Exception as e: |
| 738 | self.log.exception('evc-map-cleanup', e=e) |
| 739 | |
| 740 | from flow.acl import ACL |
| 741 | ACL.clear_all(device.id) |
| 742 | try: |
| 743 | self.startup = yield ACL.remove_all(self.netconf_client) |
| 744 | |
| 745 | except Exception as e: |
| 746 | self.log.exception('acl-cleanup', e=e) |
| 747 | |
| 748 | from flow.flow_entry import FlowEntry |
| 749 | FlowEntry.clear_all(self) |
| 750 | |
| 751 | from download import Download |
| 752 | Download.clear_all(self.netconf_client) |
| 753 | |
| 754 | # Start/stop the interfaces as needed. These are deferred calls |
| 755 | |
| 756 | dl = [] |
| 757 | for port in self.northbound_ports.itervalues(): |
| 758 | try: |
| 759 | dl.append(port.start()) |
| 760 | except Exception as e: |
| 761 | self.log.exception('northbound-port-startup', e=e) |
| 762 | |
| 763 | for port in self.southbound_ports.itervalues(): |
| 764 | try: |
| 765 | dl.append(port.start() if port.admin_state == AdminState.ENABLED else port.stop()) |
| 766 | |
| 767 | except Exception as e: |
| 768 | self.log.exception('southbound-port-startup', e=e) |
| 769 | |
| 770 | results = yield defer.gatherResults(dl, consumeErrors=True) |
| 771 | |
| 772 | returnValue(results) |
| 773 | |
| 774 | @inlineCallbacks |
| 775 | def device_information(self, device): |
| 776 | """ |
| 777 | Examine the various managment models and extract device information for |
| 778 | VOLTHA use |
| 779 | |
| 780 | :param device: A voltha.Device object, with possible device-type |
| 781 | specific extensions. |
| 782 | :return: (Deferred or None). |
| 783 | """ |
| 784 | yield defer.Deferred(lambda c: c.callback("Not Required")) |
| 785 | |
| 786 | @inlineCallbacks |
| 787 | def enumerate_northbound_ports(self, device): |
| 788 | """ |
| 789 | Enumerate all northbound ports of a device. You should override |
| 790 | a non-recoverable error, throw an appropriate exception. |
| 791 | |
| 792 | :param device: A voltha.Device object, with possible device-type |
| 793 | specific extensions. |
| 794 | :return: (Deferred or None). |
| 795 | """ |
| 796 | yield defer.Deferred(lambda c: c.callback("Not Required")) |
| 797 | |
| 798 | @inlineCallbacks |
| 799 | def process_northbound_ports(self, device, results): |
| 800 | """ |
| 801 | Process the results from the 'enumerate_northbound_ports' method. |
| 802 | You should override this method in your derived class as necessary and |
| 803 | create an NNI Port object (of your own choosing) that supports a 'get_port' |
| 804 | method. Once created, insert it into this base class's northbound_ports |
| 805 | collection. |
| 806 | |
| 807 | Should you encounter a non-recoverable error, throw an appropriate exception. |
| 808 | |
| 809 | :param device: A voltha.Device object, with possible device-type |
| 810 | specific extensions. |
| 811 | :param results: Results from the 'enumerate_northbound_ports' method that |
| 812 | you implemented. The type and contents are up to you to |
| 813 | :return: |
| 814 | """ |
| 815 | yield defer.Deferred(lambda c: c.callback("Not Required")) |
| 816 | |
| 817 | @inlineCallbacks |
| 818 | def enumerate_southbound_ports(self, device): |
| 819 | """ |
| 820 | Enumerate all southbound ports of a device. You should override |
| 821 | this method in your derived class as necessary. Should you encounter |
| 822 | a non-recoverable error, throw an appropriate exception. |
| 823 | |
| 824 | :param device: A voltha.Device object, with possible device-type |
| 825 | specific extensions. |
| 826 | :return: (Deferred or None). |
| 827 | """ |
| 828 | yield defer.Deferred(lambda c: c.callback("Not Required")) |
| 829 | |
| 830 | @inlineCallbacks |
| 831 | def process_southbound_ports(self, device, results): |
| 832 | """ |
| 833 | Process the results from the 'enumerate_southbound_ports' method. |
| 834 | You should override this method in your derived class as necessary and |
| 835 | create an Port object (of your own choosing) that supports a 'get_port' |
| 836 | method. Once created, insert it into this base class's southbound_ports |
| 837 | collection. |
| 838 | |
| 839 | Should you encounter a non-recoverable error, throw an appropriate exception. |
| 840 | |
| 841 | :param device: A voltha.Device object, with possible device-type |
| 842 | specific extensions. |
| 843 | :param results: Results from the 'enumerate_southbound_ports' method that |
| 844 | you implemented. The type and contents are up to you to |
| 845 | :return: |
| 846 | """ |
| 847 | yield defer.Deferred(lambda c: c.callback("Not Required")) |
| 848 | |
| 849 | # TODO: Move some of the items below from here and the EVC to a utility class |
| 850 | |
| 851 | def is_nni_port(self, port): |
| 852 | return port in self.northbound_ports |
| 853 | |
| 854 | def is_uni_port(self, port): |
| 855 | raise NotImplementedError('implement in derived class') |
| 856 | |
| 857 | def is_pon_port(self, port): |
| 858 | raise NotImplementedError('implement in derived class') |
| 859 | |
| 860 | def is_logical_port(self, port): |
| 861 | return not self.is_nni_port(port) and not self.is_uni_port(port) and not self.is_pon_port(port) |
| 862 | |
| 863 | def get_port_name(self, port): |
| 864 | raise NotImplementedError('implement in derived class') |
| 865 | |
| 866 | def initialize_resource_manager(self): |
| 867 | raise NotImplementedError('implement in derived class') |
| 868 | |
| 869 | @inlineCallbacks |
| 870 | def complete_device_specific_activation(self, _device, _reconciling): |
| 871 | # NOTE: Override this in your derived class for any device startup completion |
| 872 | return defer.succeed('NOP') |
| 873 | |
| 874 | @inlineCallbacks |
| 875 | def disable(self): |
| 876 | """ |
| 877 | This is called when a previously enabled device needs to be disabled based on a NBI call. |
| 878 | """ |
| 879 | self.log.info('disabling', device_id=self.device_id) |
| 880 | |
| 881 | # Cancel any running enable/disable/... in progress |
| 882 | d, self.startup = self.startup, None |
| 883 | try: |
| 884 | if d is not None and not d.called: |
| 885 | d.cancel() |
| 886 | except: |
| 887 | pass |
| 888 | |
| 889 | # Get the latest device reference |
| 890 | device = self.adapter_agent.get_device(self.device_id) |
| 891 | device.reason = 'Disabling' |
| 892 | self.adapter_agent.update_device(device) |
| 893 | |
| 894 | # Drop registration for ONU detection |
| 895 | # self.adapter_agent.unregister_for_onu_detect_state(self.device.id) |
| 896 | # Suspend any active healthchecks / pings |
| 897 | |
| 898 | h, self.heartbeat = self.heartbeat, None |
| 899 | try: |
| 900 | if h is not None and not h.called: |
| 901 | h.cancel() |
| 902 | except: |
| 903 | pass |
| 904 | # Update the operational status to UNKNOWN |
| 905 | |
| 906 | device.oper_status = OperStatus.UNKNOWN |
| 907 | device.connect_status = ConnectStatus.UNREACHABLE |
| 908 | self.adapter_agent.update_device(device) |
| 909 | |
| 910 | # Disable all child devices first |
| 911 | self.adapter_agent.update_child_devices_state(self.device_id, |
| 912 | admin_state=AdminState.DISABLED) |
| 913 | |
| 914 | # Remove the peer references from this device |
| 915 | self.adapter_agent.delete_all_peer_references(self.device_id) |
| 916 | |
| 917 | # Remove the logical device to clear out logical device ports for any |
| 918 | # previously activated ONUs |
| 919 | self._delete_logical_device() |
| 920 | |
| 921 | # Set all ports to disabled |
| 922 | self.adapter_agent.disable_all_ports(self.device_id) |
| 923 | |
| 924 | dl = [] |
| 925 | for port in self.northbound_ports.itervalues(): |
| 926 | dl.append(port.stop()) |
| 927 | |
| 928 | for port in self.southbound_ports.itervalues(): |
| 929 | dl.append(port.stop()) |
| 930 | |
| 931 | # NOTE: Flows removed before this method is called |
| 932 | # Wait for completion |
| 933 | |
| 934 | self.startup = defer.gatherResults(dl, consumeErrors=True) |
| 935 | yield self.startup |
| 936 | |
| 937 | if self.netconf_client: |
| 938 | self.netconf_client.close() |
| 939 | |
| 940 | self._netconf_client = None |
| 941 | self._rest_client = None |
| 942 | |
| 943 | device.reason = '' |
| 944 | self.adapter_agent.update_device(device) |
| 945 | self.log.info('disabled', device_id=device.id) |
| 946 | returnValue(None) |
| 947 | |
| 948 | @inlineCallbacks |
| 949 | def reenable(self, done_deferred=None): |
| 950 | """ |
| 951 | This is called when a previously disabled device needs to be enabled based on a NBI call. |
| 952 | :param done_deferred: (Deferred) Deferred to fire when done |
| 953 | """ |
| 954 | self.log.info('re-enabling', device_id=self.device_id) |
| 955 | |
| 956 | # Cancel any running enable/disable/... in progress |
| 957 | d, self.startup = self.startup, None |
| 958 | try: |
| 959 | if d is not None and not d.called: |
| 960 | d.cancel() |
| 961 | except: |
| 962 | pass |
| 963 | |
| 964 | if not self._initial_enable_complete: |
| 965 | # Never contacted the device on the initial startup, do 'activate' steps instead |
| 966 | self.startup = reactor.callLater(0, self.activate, done_deferred, False) |
| 967 | returnValue('activating') |
| 968 | |
| 969 | # Get the latest device reference |
| 970 | device = self.adapter_agent.get_device(self.device_id) |
| 971 | |
| 972 | # Update the connect status to REACHABLE |
| 973 | device.connect_status = ConnectStatus.REACHABLE |
| 974 | device.oper_status = OperStatus.ACTIVATING |
| 975 | self.adapter_agent.update_device(device) |
| 976 | |
| 977 | # Reenable any previously configured southbound ports |
| 978 | for port in self.southbound_ports.itervalues(): |
| 979 | self.log.debug('reenable-pon-port', pon_id=port.pon_id) |
| 980 | port.enabled = True |
| 981 | |
| 982 | # Flows should not exist on re-enable. They are re-pushed |
| 983 | if len(self._evcs): |
| 984 | self.log.warn('evcs-found', evcs=self._evcs) |
| 985 | self._evcs.clear() |
| 986 | |
| 987 | try: |
| 988 | yield self.make_restconf_connection() |
| 989 | |
| 990 | except Exception as e: |
| 991 | self.log.exception('adtran-hello-reconnect', e=e) |
| 992 | |
| 993 | try: |
| 994 | yield self.make_netconf_connection() |
| 995 | |
| 996 | except Exception as e: |
| 997 | self.log.exception('NETCONF-re-connection', e=e) |
| 998 | |
| 999 | # Recreate the logical device |
| 1000 | # NOTE: This causes a flow update event |
| 1001 | ld_initialized = self.create_logical_device(device) |
| 1002 | |
| 1003 | # Create logical ports for all southbound and northbound interfaces |
| 1004 | try: |
| 1005 | self.startup = self.create_logical_ports(device, ld_initialized, False) |
| 1006 | yield self.startup |
| 1007 | |
| 1008 | except Exception as e: |
| 1009 | self.log.exception('logical-port-creation', e=e) |
| 1010 | |
| 1011 | device = self.adapter_agent.get_device(device.id) |
| 1012 | device.parent_id = ld_initialized.id |
| 1013 | device.oper_status = OperStatus.ACTIVE |
| 1014 | device.reason = '' |
| 1015 | self.logical_device_id = ld_initialized.id |
| 1016 | |
| 1017 | # update device active status now |
| 1018 | self.adapter_agent.update_device(device) |
| 1019 | |
| 1020 | # Reenable all child devices |
| 1021 | self.adapter_agent.update_child_devices_state(device.id, |
| 1022 | admin_state=AdminState.ENABLED) |
| 1023 | # Schedule the heartbeat for the device |
| 1024 | self.log.debug('starting-heartbeat') |
| 1025 | self.start_heartbeat(delay=5) |
| 1026 | |
| 1027 | self.log.info('re-enabled', device_id=device.id) |
| 1028 | |
| 1029 | if done_deferred is not None: |
| 1030 | done_deferred.callback('Done') |
| 1031 | |
| 1032 | returnValue('reenabled') |
| 1033 | |
| 1034 | @inlineCallbacks |
| 1035 | def reboot(self): |
| 1036 | """ |
| 1037 | This is called to reboot a device based on a NBI call. The admin state of the device |
| 1038 | will not change after the reboot. |
| 1039 | """ |
| 1040 | self.log.debug('reboot') |
| 1041 | |
| 1042 | if not self._initial_enable_complete: |
| 1043 | # Never contacted the device on the initial startup, do 'activate' steps instead |
| 1044 | returnValue('failed') |
| 1045 | |
| 1046 | # Cancel any running enable/disable/... in progress |
| 1047 | d, self.startup = self.startup, None |
| 1048 | try: |
| 1049 | if d is not None and not d.called: |
| 1050 | d.cancel() |
| 1051 | except: |
| 1052 | pass |
| 1053 | # Issue reboot command |
| 1054 | |
| 1055 | if not self.is_virtual_olt: |
| 1056 | try: |
| 1057 | yield self.netconf_client.rpc(AdtranDeviceHandler.RESTART_RPC) |
| 1058 | |
| 1059 | except Exception as e: |
| 1060 | self.log.exception('NETCONF-shutdown', e=e) |
| 1061 | returnValue(defer.fail(Failure())) |
| 1062 | |
| 1063 | # self.adapter_agent.unregister_for_onu_detect_state(self.device.id) |
| 1064 | |
| 1065 | # Update the operational status to ACTIVATING and connect status to |
| 1066 | # UNREACHABLE |
| 1067 | |
| 1068 | device = self.adapter_agent.get_device(self.device_id) |
| 1069 | previous_oper_status = device.oper_status |
| 1070 | previous_conn_status = device.connect_status |
| 1071 | device.oper_status = OperStatus.ACTIVATING |
| 1072 | device.connect_status = ConnectStatus.UNREACHABLE |
| 1073 | self.adapter_agent.update_device(device) |
| 1074 | |
| 1075 | # Update the child devices connect state to UNREACHABLE |
| 1076 | self.adapter_agent.update_child_devices_state(self.device_id, |
| 1077 | connect_status=ConnectStatus.UNREACHABLE) |
| 1078 | |
| 1079 | # Shutdown communications with OLT. Typically it takes about 2 seconds |
| 1080 | # or so after the reply before the restart actually occurs |
| 1081 | |
| 1082 | try: |
| 1083 | response = yield self.netconf_client.close() |
| 1084 | self.log.debug('Restart response XML was: {}'.format('ok' if response.ok else 'bad')) |
| 1085 | |
| 1086 | except Exception as e: |
| 1087 | self.log.exception('NETCONF-client-shutdown', e=e) |
| 1088 | |
| 1089 | # Clear off clients |
| 1090 | |
| 1091 | self._netconf_client = None |
| 1092 | self._rest_client = None |
| 1093 | |
| 1094 | # Run remainder of reboot process as a new task. The OLT then may be up in a |
| 1095 | # few moments or may take 3 minutes or more depending on any self tests enabled |
| 1096 | |
| 1097 | current_time = time.time() |
| 1098 | timeout = current_time + self.restart_failure_timeout |
| 1099 | |
| 1100 | self.startup = reactor.callLater(10, self._finish_reboot, timeout, |
| 1101 | previous_oper_status, |
| 1102 | previous_conn_status) |
| 1103 | returnValue(self.startup) |
| 1104 | |
| 1105 | @inlineCallbacks |
| 1106 | def _finish_reboot(self, timeout, previous_oper_status, previous_conn_status): |
| 1107 | # Now wait until REST & NETCONF are re-established or we timeout |
| 1108 | |
| 1109 | self.log.info('Resuming-activity', |
| 1110 | remaining=timeout - time.time(), timeout=timeout, current=time.time()) |
| 1111 | |
| 1112 | if self.rest_client is None: |
| 1113 | try: |
| 1114 | yield self.make_restconf_connection(get_timeout=10) |
| 1115 | |
| 1116 | except Exception: |
| 1117 | self.log.debug('No RESTCONF connection yet') |
| 1118 | self._rest_client = None |
| 1119 | |
| 1120 | if self.netconf_client is None: |
| 1121 | try: |
| 1122 | yield self.make_netconf_connection(connect_timeout=10) |
| 1123 | |
| 1124 | except Exception as e: |
| 1125 | try: |
| 1126 | if self.netconf_client is not None: |
| 1127 | yield self.netconf_client.close() |
| 1128 | except Exception as e: |
| 1129 | self.log.exception(e.message) |
| 1130 | finally: |
| 1131 | self._netconf_client = None |
| 1132 | |
| 1133 | if (self.netconf_client is None and not self.is_virtual_olt) or self.rest_client is None: |
| 1134 | current_time = time.time() |
| 1135 | if current_time < timeout: |
| 1136 | self.startup = reactor.callLater(5, self._finish_reboot, timeout, |
| 1137 | previous_oper_status, |
| 1138 | previous_conn_status) |
| 1139 | returnValue(self.startup) |
| 1140 | |
| 1141 | if self.netconf_client is None and not self.is_virtual_olt: |
| 1142 | self.log.error('NETCONF-restore-failure') |
| 1143 | pass # TODO: What is best course of action if cannot get clients back? |
| 1144 | |
| 1145 | if self.rest_client is None: |
| 1146 | self.log.error('RESTCONF-restore-failure') |
| 1147 | pass # TODO: What is best course of action if cannot get clients back? |
| 1148 | |
| 1149 | # Pause additional 5 seconds to let allow OLT microservices to complete some more initialization |
| 1150 | yield asleep(5) |
| 1151 | # TODO: Update device info. The software images may have changed... |
| 1152 | # Get the latest device reference |
| 1153 | |
| 1154 | device = self.adapter_agent.get_device(self.device_id) |
| 1155 | device.oper_status = previous_oper_status |
| 1156 | device.connect_status = previous_conn_status |
| 1157 | self.adapter_agent.update_device(device) |
| 1158 | |
| 1159 | # Update the child devices connect state to REACHABLE |
| 1160 | self.adapter_agent.update_child_devices_state(self.device_id, |
| 1161 | connect_status=ConnectStatus.REACHABLE) |
| 1162 | # Restart ports to previous state |
| 1163 | dl = [] |
| 1164 | |
| 1165 | for port in self.northbound_ports.itervalues(): |
| 1166 | dl.append(port.restart()) |
| 1167 | |
| 1168 | for port in self.southbound_ports.itervalues(): |
| 1169 | dl.append(port.restart()) |
| 1170 | |
| 1171 | try: |
| 1172 | yield defer.gatherResults(dl, consumeErrors=True) |
| 1173 | |
| 1174 | except Exception as e: |
| 1175 | self.log.exception('port-restart', e=e) |
| 1176 | |
| 1177 | # Re-subscribe for ONU detection |
| 1178 | # self.adapter_agent.register_for_onu_detect_state(self.device.id) |
| 1179 | # Request reflow of any EVC/EVC-MAPs |
| 1180 | if len(self._evcs) > 0: |
| 1181 | dl = [] |
| 1182 | for evc in self.evcs: |
| 1183 | dl.append(evc.reflow()) |
| 1184 | |
| 1185 | try: |
| 1186 | yield defer.gatherResults(dl) |
| 1187 | except Exception as e: |
| 1188 | self.log.exception('flow-restart', e=e) |
| 1189 | |
| 1190 | self.log.info('rebooted', device_id=self.device_id) |
| 1191 | returnValue('Rebooted') |
| 1192 | |
| 1193 | @inlineCallbacks |
| 1194 | def delete(self): |
| 1195 | """ |
| 1196 | This is called to delete a device from the PON based on a NBI call. |
| 1197 | If the device is an OLT then the whole PON will be deleted. |
| 1198 | """ |
| 1199 | self.log.info('deleting', device_id=self.device_id) |
| 1200 | |
| 1201 | # Cancel any outstanding tasks |
| 1202 | |
| 1203 | d, self.startup = self.startup, None |
| 1204 | try: |
| 1205 | if d is not None and not d.called: |
| 1206 | d.cancel() |
| 1207 | except: |
| 1208 | pass |
| 1209 | h, self.heartbeat = self.heartbeat, None |
| 1210 | try: |
| 1211 | if h is not None and not h.called: |
| 1212 | h.cancel() |
| 1213 | except: |
| 1214 | pass |
| 1215 | |
| 1216 | # Get the latest device reference |
| 1217 | device = self.adapter_agent.get_device(self.device_id) |
| 1218 | device.reason = 'Deleting' |
| 1219 | self.adapter_agent.update_device(device) |
| 1220 | |
| 1221 | # self.adapter_agent.unregister_for_onu_detect_state(self.device.id) |
| 1222 | |
| 1223 | # Remove all flows from the device |
| 1224 | # TODO: Create a bulk remove-all by device-id |
| 1225 | |
| 1226 | evcs = self._evcs |
| 1227 | self._evcs.clear() |
| 1228 | |
| 1229 | for evc in evcs: |
| 1230 | evc.delete() # TODO: implement bulk-flow procedures |
| 1231 | |
| 1232 | # Remove all child devices |
| 1233 | self.adapter_agent.delete_all_child_devices(self.device_id) |
| 1234 | |
| 1235 | # Remove the logical device (should already be gone if disable came first) |
| 1236 | self._delete_logical_device() |
| 1237 | |
| 1238 | # Remove the peer references from this device |
| 1239 | self.adapter_agent.delete_all_peer_references(self.device_id) |
| 1240 | |
| 1241 | # Tell all ports to stop any background processing |
| 1242 | |
| 1243 | for port in self.northbound_ports.itervalues(): |
| 1244 | port.delete() |
| 1245 | |
| 1246 | for port in self.southbound_ports.itervalues(): |
| 1247 | port.delete() |
| 1248 | |
| 1249 | self.northbound_ports.clear() |
| 1250 | self.southbound_ports.clear() |
| 1251 | |
| 1252 | # Shutdown communications with OLT |
| 1253 | |
| 1254 | if self.netconf_client is not None: |
| 1255 | try: |
| 1256 | yield self.netconf_client.close() |
| 1257 | except Exception as e: |
| 1258 | self.log.exception('NETCONF-shutdown', e=e) |
| 1259 | |
| 1260 | self._netconf_client = None |
| 1261 | |
| 1262 | self._rest_client = None |
| 1263 | mgr, self.resource_mgr = self.resource_mgr, None |
| 1264 | if mgr is not None: |
| 1265 | del mgr |
| 1266 | |
| 1267 | self.log.info('deleted', device_id=self.device_id) |
| 1268 | |
| 1269 | def delete_child_device(self, proxy_address): |
| 1270 | self.log.debug('sending-deactivate-onu', |
| 1271 | olt_device_id=self.device_id, |
| 1272 | proxy_address=proxy_address) |
| 1273 | try: |
| 1274 | children = self.adapter_agent.get_child_devices(self.device_id) |
| 1275 | for child in children: |
| 1276 | if child.proxy_address.onu_id == proxy_address.onu_id and \ |
| 1277 | child.proxy_address.channel_id == proxy_address.channel_id: |
| 1278 | self.adapter_agent.delete_child_device(self.device_id, |
| 1279 | child.id, |
| 1280 | onu_device=child) |
| 1281 | break |
| 1282 | |
| 1283 | except Exception as e: |
| 1284 | self.log.error('adapter_agent error', error=e) |
| 1285 | |
| 1286 | def packet_out(self, egress_port, msg): |
| 1287 | raise NotImplementedError('Overload in a derived class') |
| 1288 | |
| 1289 | def update_pm_config(self, device, pm_config): |
| 1290 | # TODO: This has not been tested |
| 1291 | self.log.info('update_pm_config', pm_config=pm_config) |
| 1292 | self.pm_metrics.update(pm_config) |
| 1293 | |
| 1294 | @inlineCallbacks |
| 1295 | def get_device_info(self, device): |
| 1296 | """ |
| 1297 | Perform an initial network operation to discover the device hardware |
| 1298 | and software version. Serial Number would be helpful as well. |
| 1299 | |
| 1300 | Upon successfully retrieving the information, remember to call the |
| 1301 | 'start_heartbeat' method to keep in contact with the device being managed |
| 1302 | |
| 1303 | :param device: A voltha.Device object, with possible device-type |
| 1304 | specific extensions. Such extensions shall be described as part of |
| 1305 | the device type specification returned by device_types(). |
| 1306 | """ |
| 1307 | device = {} |
| 1308 | returnValue(device) |
| 1309 | |
| 1310 | def start_heartbeat(self, delay=10): |
| 1311 | assert delay > 1, 'Minimum heartbeat is 1 second' |
| 1312 | self.log.info('Starting-Device-Heartbeat ***') |
| 1313 | self.heartbeat = reactor.callLater(delay, self.check_pulse) |
| 1314 | return self.heartbeat |
| 1315 | |
| 1316 | def check_pulse(self): |
| 1317 | if self.logical_device_id is not None: |
| 1318 | try: |
| 1319 | self.heartbeat = self.rest_client.request('GET', self.HELLO_URI, |
| 1320 | name='hello', timeout=5) |
| 1321 | self.heartbeat.addCallbacks(self._heartbeat_success, self._heartbeat_fail) |
| 1322 | |
| 1323 | except Exception as e: |
| 1324 | self.heartbeat = reactor.callLater(5, self._heartbeat_fail, e) |
| 1325 | |
| 1326 | def on_heatbeat_alarm(self, active): |
| 1327 | if active and self.netconf_client is None or not self.netconf_client.connected: |
| 1328 | self.make_netconf_connection(close_existing_client=True) |
| 1329 | |
| 1330 | def heartbeat_check_status(self, _): |
| 1331 | """ |
| 1332 | Check the number of heartbeat failures against the limit and emit an alarm if needed |
| 1333 | """ |
| 1334 | device = self.adapter_agent.get_device(self.device_id) |
| 1335 | |
| 1336 | try: |
| 1337 | from pyvoltha.adapters.extensions.alarms.heartbeat_alarm import HeartbeatAlarm |
| 1338 | |
| 1339 | if self.heartbeat_miss >= self.heartbeat_failed_limit: |
| 1340 | if device.connect_status == ConnectStatus.REACHABLE: |
| 1341 | self.log.warning('heartbeat-failed', count=self.heartbeat_miss) |
| 1342 | device.connect_status = ConnectStatus.UNREACHABLE |
| 1343 | device.oper_status = OperStatus.FAILED |
| 1344 | device.reason = self.heartbeat_last_reason |
| 1345 | self.adapter_agent.update_device(device) |
| 1346 | HeartbeatAlarm(self.alarms, 'olt', self.heartbeat_miss).raise_alarm() |
| 1347 | self.on_heatbeat_alarm(True) |
| 1348 | else: |
| 1349 | # Update device states |
| 1350 | if device.connect_status != ConnectStatus.REACHABLE: |
| 1351 | device.connect_status = ConnectStatus.REACHABLE |
| 1352 | device.oper_status = OperStatus.ACTIVE |
| 1353 | device.reason = '' |
| 1354 | self.adapter_agent.update_device(device) |
| 1355 | HeartbeatAlarm(self.alarms, 'olt').clear_alarm() |
| 1356 | self.on_heatbeat_alarm(False) |
| 1357 | |
| 1358 | if self.netconf_client is None or not self.netconf_client.connected: |
| 1359 | self.make_netconf_connection(close_existing_client=True) |
| 1360 | |
| 1361 | except Exception as e: |
| 1362 | self.log.exception('heartbeat-check', e=e) |
| 1363 | |
| 1364 | # Reschedule next heartbeat |
| 1365 | if self.logical_device_id is not None: |
| 1366 | self.heartbeat_count += 1 |
| 1367 | self.heartbeat = reactor.callLater(self.heartbeat_interval, self.check_pulse) |
| 1368 | |
| 1369 | def _heartbeat_success(self, results): |
| 1370 | self.log.debug('heartbeat-success') |
| 1371 | self.heartbeat_miss = 0 |
| 1372 | self.heartbeat_last_reason = '' |
| 1373 | self.heartbeat_check_status(results) |
| 1374 | |
| 1375 | def _heartbeat_fail(self, failure): |
| 1376 | self.heartbeat_miss += 1 |
| 1377 | self.log.info('heartbeat-miss', failure=failure, |
| 1378 | count=self.heartbeat_count, |
| 1379 | miss=self.heartbeat_miss) |
| 1380 | self.heartbeat_last_reason = 'RESTCONF connectivity error' |
| 1381 | self.heartbeat_check_status(None) |
| 1382 | |
| 1383 | @staticmethod |
| 1384 | def parse_module_revision(revision): |
| 1385 | try: |
| 1386 | return datetime.datetime.strptime(revision, '%Y-%m-%d') |
| 1387 | except Exception: |
| 1388 | return None |
| 1389 | |
| 1390 | def remove_from_flow_table(self, _flows): |
| 1391 | """ |
| 1392 | Remove flows from the device |
| 1393 | :param _flows: (list) Flows |
| 1394 | """ |
| 1395 | raise NotImplementedError() |
| 1396 | |
| 1397 | def add_to_flow_table(self, _flows): |
| 1398 | """ |
| 1399 | Remove flows from the device |
| 1400 | :param _flows: (list) Flows |
| 1401 | """ |
| 1402 | raise NotImplementedError() |
| 1403 | |
| 1404 | def process_inter_adapter_message(self, msg): |
| 1405 | """ |
| 1406 | Called when the adapter receives a message that was sent to it directly |
| 1407 | from another adapter. An adapter is automatically registered for these |
| 1408 | messages when creating the inter-container kafka proxy. Note that it is |
| 1409 | the responsibility of the sending and receiving adapters to properly encode |
| 1410 | and decode the message. |
| 1411 | :param msg: Proto Message (any) |
| 1412 | :return: Proto Message Response |
| 1413 | """ |
| 1414 | raise NotImplementedError() |
| 1415 | |
| 1416 | def get_ofp_device_info(self, device): |
| 1417 | """ |
| 1418 | Retrieve the OLT device info. This includes the ofp_desc and |
| 1419 | ofp_switch_features. The existing ofp structures can be used, |
| 1420 | or all the attributes get added to the Device definition or a new proto |
| 1421 | definition gets created. This API will allow the Core to create a |
| 1422 | LogicalDevice associated with this device (OLT only). |
| 1423 | :param device: device |
| 1424 | :return: Proto Message (TBD) |
| 1425 | """ |
| 1426 | raise NotImplementedError() |
| 1427 | |
| 1428 | def get_ofp_port_info(self, device, port_no): |
| 1429 | """ |
| 1430 | Retrieve the port info. This includes the ofp_port. The existing ofp |
| 1431 | structure can be used, or all the attributes get added to the Port |
| 1432 | definitions or a new proto definition gets created. This API will allow |
| 1433 | the Core to create a LogicalPort associated with this device. |
| 1434 | :param device: device |
| 1435 | :param port_no: port number |
| 1436 | :return: Proto Message (TBD) |
| 1437 | """ |
| 1438 | raise NotImplementedError() |