| Scott Baker | e7144bc | 2019-10-01 14:16:47 -0700 | [diff] [blame^] | 1 | { |
| 2 | "servers": [ |
| 3 | { |
| 4 | "name": "grpc_command", |
| 5 | "port": 55555, |
| 6 | "address": "localhost", |
| 7 | "type": "grpc", |
| 8 | "routers": [ |
| 9 | { |
| 10 | "_TODO": "Suport a router list, remove the package and service from the router", |
| 11 | "package": "voltha", |
| 12 | "service": "VolthaService", |
| 13 | "router": "vcore" |
| 14 | } |
| 15 | ] |
| 16 | } |
| 17 | ], |
| 18 | "routers": [ |
| 19 | { |
| 20 | "name": "vcore", |
| 21 | "package": "voltha", |
| 22 | "service": "VolthaService", |
| 23 | "proto_descriptor": "vendor/github.com/opencord/voltha-protos/go/voltha.pb", |
| 24 | "routes": [ |
| 25 | { |
| 26 | "name": "dev_manager", |
| 27 | "type": "rpc_affinity_message", |
| 28 | "association": "round_robin", |
| 29 | "routing_field": "id", |
| 30 | "backend_cluster": "vcore", |
| 31 | "_COMMENT": "Methods are naturally southbound affinity binding unless otherwise specified below", |
| 32 | "methods": [ |
| 33 | "CreateDevice", |
| 34 | "GetCoreInstance", |
| 35 | "EnableLogicalDevicePort", |
| 36 | "DisableLogicalDevicePort", |
| 37 | "EnableDevice", |
| 38 | "DisableDevice", |
| 39 | "RebootDevice", |
| 40 | "DeleteDevice", |
| 41 | "DownloadImage", |
| 42 | "CancelImageDownload", |
| 43 | "ActivateImageUpdate", |
| 44 | "RevertImageUpdate", |
| 45 | "UpdateDevicePmConfigs", |
| 46 | "CreateAlarmFilter", |
| 47 | "UpdateAlarmFilter", |
| 48 | "DeleteAlarmFilter", |
| 49 | "SelfTest" |
| 50 | ], |
| 51 | "_COMMENT": "If a method is northbound affinity binding then association is used to route", |
| 52 | "_COMMENT": "but affinity is not set southbound but only based on the response", |
| 53 | "_COMMENT": "Methods here MUST be specified above, this overrides thier default beahvior", |
| 54 | "nb_binding_methods": [ |
| 55 | "CreateDevice" |
| 56 | ], |
| 57 | "_TODO": "Overrides not implemented yet, config ignored", |
| 58 | "overrides": [ |
| 59 | { |
| 60 | "methods": [ |
| 61 | "abc", |
| 62 | "def" |
| 63 | ], |
| 64 | "routing_field": "id" |
| 65 | }, |
| 66 | { |
| 67 | "methods": [ |
| 68 | "ghi", |
| 69 | "jkl" |
| 70 | ] |
| 71 | }, |
| 72 | { |
| 73 | "method": "mno", |
| 74 | "routing_field": "id" |
| 75 | }, |
| 76 | { |
| 77 | "method": "pqr" |
| 78 | } |
| 79 | ] |
| 80 | }, |
| 81 | { |
| 82 | "name": "logger", |
| 83 | "proto_descriptor": "voltha.pb", |
| 84 | "type": "source", |
| 85 | "routing_field": "component_name", |
| 86 | "backend_cluster": "ro_vcore", |
| 87 | "methods": [ |
| 88 | "UpdateLogLevel", |
| 89 | "GetLogLevels" |
| 90 | ] |
| 91 | }, |
| 92 | { |
| 93 | "name": "read_only", |
| 94 | "type": "round_robin", |
| 95 | "association": "round_robin", |
| 96 | "backend_cluster": "ro_vcore", |
| 97 | "methods": [ |
| 98 | "ListDevicePorts", |
| 99 | "ListDevicePmConfigs", |
| 100 | "GetImages", |
| 101 | "GetImageDownloadStatus", |
| 102 | "GetImageDownload", |
| 103 | "ListImageDownloads", |
| 104 | "ListDeviceFlows", |
| 105 | "ListDeviceFlowGroups", |
| 106 | "ListLogicalDeviceFlows", |
| 107 | "ListLogicalDeviceFlowGroups", |
| 108 | "ListDevices", |
| 109 | "GetDevice", |
| 110 | "ListLogicalDevices", |
| 111 | "GetLogicalDevices", |
| 112 | "GetDeviceType", |
| 113 | "GetDeviceGroup", |
| 114 | "GetLogicalDevice", |
| 115 | "GetAlarmFilter", |
| 116 | "ListLogicalDevicePorts", |
| 117 | "GetLogicalDevicePort" |
| 118 | ] |
| 119 | }, |
| 120 | { |
| 121 | "name": "dev_manager_ofagent", |
| 122 | "type": "binding", |
| 123 | "_association": "round_robin", |
| 124 | "binding": { |
| 125 | "type": "header", |
| 126 | "field": "voltha_backend_name", |
| 127 | "method": "Subscribe", |
| 128 | "association": "round_robin" |
| 129 | }, |
| 130 | "backend_cluster": "vcore", |
| 131 | "methods": [ |
| 132 | "StreamPacketsOut", |
| 133 | "ReceivePacketsIn", |
| 134 | "ReceiveChangeEvents", |
| 135 | "Subscribe", |
| 136 | "UpdateLogicalDeviceFlowTable", |
| 137 | "UpdateLogicalDeviceFlowGroupTable", |
| 138 | "GetLogicalDevice", |
| 139 | "GetLogicalDevicePort", |
| 140 | "EnableLogicalDevicePort", |
| 141 | "DisableLogicalDevicePort", |
| 142 | "ListLogicalDevices", |
| 143 | "ListLogicalDeviceFlows", |
| 144 | "ListLogicalDeviceFlowGroups", |
| 145 | "ListLogicalDevicePorts" |
| 146 | ], |
| 147 | "_TODO": "Overrides not implemented yet, config ignored", |
| 148 | "overrides": [ |
| 149 | { |
| 150 | "methods": [ |
| 151 | "abc", |
| 152 | "def" |
| 153 | ], |
| 154 | "routing_field": "id" |
| 155 | }, |
| 156 | { |
| 157 | "methods": [ |
| 158 | "ghi", |
| 159 | "jkl" |
| 160 | ] |
| 161 | }, |
| 162 | { |
| 163 | "method": "mno", |
| 164 | "routing_field": "id" |
| 165 | }, |
| 166 | { |
| 167 | "method": "pqr" |
| 168 | } |
| 169 | ] |
| 170 | } |
| 171 | ] |
| 172 | } |
| 173 | ], |
| 174 | "backend_clusters": [ |
| 175 | { |
| 176 | "name": "vcore", |
| 177 | "backends": [ |
| 178 | { |
| 179 | "name": "vcore1", |
| 180 | "type": "active_active", |
| 181 | "association": { |
| 182 | "strategy": "serial_number", |
| 183 | "location": "header", |
| 184 | "_TODO": "The key below needs to be implemented, currently hard coded", |
| 185 | "key": "voltha_serial_number" |
| 186 | }, |
| 187 | "connections": [ |
| 188 | { |
| 189 | "name": "vcore11", |
| 190 | "addr": "voltha-rw-core-11.voltha.svc.cluster.local", |
| 191 | "port": "50057" |
| 192 | }, |
| 193 | { |
| 194 | "name": "vcore12", |
| 195 | "addr": "voltha-rw-core-12.voltha.svc.cluster.local", |
| 196 | "port": "50057" |
| 197 | } |
| 198 | ] |
| 199 | }, |
| 200 | { |
| 201 | "name": "vcore2", |
| 202 | "type": "active_active", |
| 203 | "association": { |
| 204 | "strategy": "serial_number", |
| 205 | "location": "header", |
| 206 | "_TODO": "The key below needs to be implemented, currently hard coded", |
| 207 | "key": "voltha_serial_number" |
| 208 | }, |
| 209 | "connections": [ |
| 210 | { |
| 211 | "name": "vcore21", |
| 212 | "addr": "voltha-rw-core-21.voltha.svc.cluster.local", |
| 213 | "port": "50057" |
| 214 | }, |
| 215 | { |
| 216 | "name": "vcore22", |
| 217 | "addr": "voltha-rw-core-22.voltha.svc.cluster.local", |
| 218 | "port": "50057" |
| 219 | } |
| 220 | ] |
| 221 | }, |
| 222 | { |
| 223 | "name": "vcore3", |
| 224 | "type": "active_active", |
| 225 | "association": { |
| 226 | "strategy": "serial_number", |
| 227 | "location": "header", |
| 228 | "_TODO": "The key below needs to be implemented, currently hard coded", |
| 229 | "key": "voltha_serial_number" |
| 230 | }, |
| 231 | "connections": [ |
| 232 | { |
| 233 | "name": "vcore31", |
| 234 | "addr": "voltha-rw-core-31.voltha.svc.cluster.local", |
| 235 | "port": "50057" |
| 236 | }, |
| 237 | { |
| 238 | "name": "vcore32", |
| 239 | "addr": "voltha-rw-core-32.voltha.svc.cluster.local", |
| 240 | "port": "50057" |
| 241 | } |
| 242 | ] |
| 243 | } |
| 244 | ] |
| 245 | }, |
| 246 | { |
| 247 | "name": "ro_vcore", |
| 248 | "backends": [ |
| 249 | { |
| 250 | "name": "ro_vcore1", |
| 251 | "type": "server", |
| 252 | "connections": [ |
| 253 | { |
| 254 | "name": "ro_vcore11", |
| 255 | "addr": "voltha-ro-core-0.voltha-ro-core.voltha.svc.cluster.local", |
| 256 | "port": "50057" |
| 257 | } |
| 258 | ] |
| 259 | }, |
| 260 | { |
| 261 | "name": "ro_vcore2", |
| 262 | "type": "server", |
| 263 | "connections": [ |
| 264 | { |
| 265 | "name": "ro_vcore21", |
| 266 | "addr": "voltha-ro-core-1.voltha-ro-core.voltha.svc.cluster.local", |
| 267 | "port": "50057" |
| 268 | } |
| 269 | ] |
| 270 | }, |
| 271 | { |
| 272 | "name": "ro_vcore3", |
| 273 | "type": "server", |
| 274 | "connections": [ |
| 275 | { |
| 276 | "name": "ro_vcore31", |
| 277 | "addr": "voltha-ro-core-2.voltha-ro-core.voltha.svc.cluster.local", |
| 278 | "port": "50057" |
| 279 | } |
| 280 | ] |
| 281 | } |
| 282 | ] |
| 283 | } |
| 284 | ], |
| 285 | "api": { |
| 286 | "_comment": "If this isn't defined then no api is available for dynamic configuration and queries", |
| 287 | "address": "localhost", |
| 288 | "port": 55554 |
| 289 | } |
| 290 | } |