| /****************************************************************************** |
| * |
| * <:copyright-BRCM:2016:DUAL/GPL:standard |
| * |
| * Copyright (c) 2016 Broadcom |
| * All Rights Reserved |
| * |
| * Unless you and Broadcom execute a separate written software license |
| * agreement governing use of this software, this software is licensed |
| * to you under the terms of the GNU General Public License version 2 |
| * (the "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, |
| * with the following added to such license: |
| * |
| * As a special exception, the copyright holders of this software give |
| * you permission to link this software with independent modules, and |
| * to copy and distribute the resulting executable under terms of your |
| * choice, provided that you also meet, for each linked independent |
| * module, the terms and conditions of the license of that module. |
| * An independent module is a module which is not derived from this |
| * software. The special exception does not apply to any modifications |
| * of the software. |
| * |
| * Not withstanding the above, under no circumstances may you combine |
| * this software in any way with any other Broadcom software provided |
| * under a license other than the GPL, without Broadcom's express prior |
| * written consent. |
| * |
| * :> |
| * |
| *****************************************************************************/ |
| |
| /** |
| * @file bal_switch_cli.c |
| * @brief Sample CLI for switch integration module |
| * |
| */ |
| |
| /*@{*/ |
| |
| #include <bal_common.h> |
| #include <bcm_dev_log.h> |
| #include <bal_msg.h> |
| #include "bal_switch_util.h" |
| #include <bcmcli.h> |
| |
| /* Below local functions are used for real logic only */ |
| #ifndef TEST_SW_UTIL_LOOPBACK |
| |
| #include "bal_switch_acc_term.h" |
| #include <bcm/types.h> |
| #include <bcm/port.h> |
| #include <appl/diag/shell.h> |
| |
| static bcmcli_entry *switch_cli_dir; |
| |
| /* Function declarations */ |
| |
| /* |
| * CLI backend helper functions |
| */ |
| |
| static bcmos_errno bal_switch_device(bcmcli_session *sess, const bcmcli_cmd_parm parm[], uint16_t nParms) |
| { |
| bal_bcm_dft_dev_set(parm[0].value.number); |
| return BCM_ERR_OK; |
| } |
| |
| static bcmos_errno bal_switch_l2_age_time(bcmcli_session *sess, const bcmcli_cmd_parm parm[], uint16_t nParms) |
| { |
| bal_bcm_l2_age_time_set(parm[0].value.number); |
| return BCM_ERR_OK; |
| } |
| |
| static bcmos_errno bal_switch_rpc_mode(bcmcli_session *sess, const bcmcli_cmd_parm parm[], uint16_t nParms) |
| { |
| bal_bcm_use_rpc_set(parm[0].value.number); |
| return BCM_ERR_OK; |
| } |
| |
| static bcmos_errno bal_switch_intf_map(bcmcli_session *sess, const bcmcli_cmd_parm parm[], uint16_t nParms) |
| { |
| bal_bcm_intf_maptable_set(parm[0].value.number); |
| return BCM_ERR_OK; |
| } |
| |
| static bcmos_errno bal_switch_trap_udp_port(bcmcli_session *sess, const bcmcli_cmd_parm parm[], uint16_t nParms) |
| { |
| bal_bcm_trap_rcv_port_set(parm[0].value.number); |
| return BCM_ERR_OK; |
| } |
| |
| static bcmos_errno bal_switch_shell(bcmcli_session *sess, const bcmcli_cmd_parm parm[], uint16_t nParms) |
| { |
| sh_process(-1, "BCM", TRUE); |
| return BCM_ERR_OK; |
| } |
| /* allow CLI to send a testing packet out of NNI interface, input is interface_number */ |
| static bcmos_errno bal_switch_pkt_out(bcmcli_session *sess, const bcmcli_cmd_parm parm[], uint16_t nParms) |
| { |
| int out_port = parm[0].value.number; |
| unsigned char pkt_tagged_data[64] = { |
| 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, /* DA */ |
| 0x00, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, /* SA */ |
| 0x81, 0x00, 0x00, 0x01, /* TPID + VID */ |
| 0x08, 0x00, 0x45, 0x10, 0x00, 0x46, 0x00, 0x00, 0x00, 0x00, 0x32, 0x06, |
| 0x82, 0xab, 0x01, 0x01, 0x01, 0x02, 0x02, 0x02, 0x02, |
| 0x03, 0x04, 0x00, 0x04, 0x01, 0x00, 0x56, 0xf1, 0x39, 0x00, 0x00, |
| 0x11, 0x22, 0x33, 0x44, 0x55, 0x66}; |
| |
| sw_util_pkt_send(out_port, REASON_SEND_TO_NNI, pkt_tagged_data, 64, 0); |
| return BCM_ERR_OK; |
| } |
| |
| /* allow CLI to send a testing packet out of PON interface, inputs are interface_number and tunnel_id */ |
| static bcmos_errno bal_switch_pon_out(bcmcli_session *sess, const bcmcli_cmd_parm parm[], uint16_t nParms) |
| { |
| int out_port = parm[0].value.number; |
| int tunnel_id = parm[1].value.number; |
| unsigned char pkt_tagged_data[64] = { |
| 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, /* DA */ |
| 0x00, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, /* SA */ |
| 0x81, 0x00, 0x00, 0x01, /* TPID + VID */ |
| 0x08, 0x00, 0x45, 0x10, 0x00, 0x46, 0x00, 0x00, 0x00, 0x00, 0x32, 0x06, |
| 0x82, 0xab, 0x01, 0x01, 0x01, 0x02, 0x02, 0x02, 0x02, |
| 0x03, 0x04, 0x00, 0x04, 0x01, 0x00, 0x56, 0xf1, 0x39, 0x00, 0x00, |
| 0x11, 0x22, 0x33, 0x44, 0x55, 0x66}; |
| |
| sw_util_pkt_send(out_port, REASON_SEND_TO_PON, pkt_tagged_data, 64, tunnel_id); |
| return BCM_ERR_OK; |
| } |
| |
| #endif |
| |
| /* Create CLI directory */ |
| bcmos_errno sw_util_cli_init(bcmcli_entry *top_dir) |
| { |
| #ifndef TEST_SW_UTIL_LOOPBACK |
| if (switch_cli_dir) |
| { |
| return BCM_ERR_ALREADY; |
| } |
| switch_cli_dir = bcmcli_dir_add(top_dir, "switch", "Switch CLI commands", BCMCLI_ACCESS_GUEST, NULL); |
| BCMOS_CHECK_RETURN_ERROR(!switch_cli_dir, BCM_ERR_INTERNAL); |
| |
| BCMCLI_MAKE_CMD(switch_cli_dir, "device", "Set default device", bal_switch_device, |
| BCMCLI_MAKE_PARM("index", "Device index", BCMCLI_PARM_NUMBER, BCMCLI_PARM_FLAG_NONE)); |
| |
| BCMCLI_MAKE_CMD(switch_cli_dir, "l2_agetime", "Set L2 table aging time", bal_switch_l2_age_time, |
| BCMCLI_MAKE_PARM("time", "L2 Aging Time", BCMCLI_PARM_NUMBER, BCMCLI_PARM_FLAG_NONE)); |
| |
| BCMCLI_MAKE_CMD(switch_cli_dir, "rpc_mode", "Set RPC mode", bal_switch_rpc_mode, |
| BCMCLI_MAKE_PARM_ENUM("enable", "Enable RPC mode", bcmcli_enum_bool_table, BCMCLI_PARM_FLAG_NONE)); |
| |
| BCMCLI_MAKE_CMD(switch_cli_dir, "intf_map_table", "Select interface mapping table", bal_switch_intf_map, |
| BCMCLI_MAKE_PARM("table", "Interface Mapping Table Number", BCMCLI_PARM_NUMBER, BCMCLI_PARM_FLAG_NONE)); |
| |
| BCMCLI_MAKE_CMD(switch_cli_dir, "trap_udp_port", "Set trap packet receiving udp port", bal_switch_trap_udp_port, |
| BCMCLI_MAKE_PARM("port", "Receiving Port number", BCMCLI_PARM_NUMBER, BCMCLI_PARM_FLAG_NONE)); |
| |
| BCMCLI_MAKE_CMD(switch_cli_dir, "nni_packet_out", "Send example packet vid=1 to switch nni port", bal_switch_pkt_out, |
| BCMCLI_MAKE_PARM("port", "Sending Port number", BCMCLI_PARM_NUMBER, BCMCLI_PARM_FLAG_NONE)); |
| |
| BCMCLI_MAKE_CMD(switch_cli_dir, "pon_packet_out", "Send example packet vid=1 to switch pon port", bal_switch_pon_out, |
| BCMCLI_MAKE_PARM("port", "Sending Port number", BCMCLI_PARM_NUMBER, BCMCLI_PARM_FLAG_NONE), |
| BCMCLI_MAKE_PARM("tunnel", "Sending Tunnel Id", BCMCLI_PARM_NUMBER, BCMCLI_PARM_FLAG_NONE)); |
| |
| BCMCLI_MAKE_CMD_NOPARM(switch_cli_dir, "shell", "Switch SDK shell", bal_switch_shell); |
| #endif |
| return BCM_ERR_OK; |
| } |
| |
| /*@}*/ |