Shad Ansari | 2f7f9be | 2017-06-07 13:34:53 -0700 | [diff] [blame^] | 1 | /****************************************************************************** |
| 2 | * |
| 3 | * <:copyright-BRCM:2016:DUAL/GPL:standard |
| 4 | * |
| 5 | * Copyright (c) 2016 Broadcom |
| 6 | * All Rights Reserved |
| 7 | * |
| 8 | * Unless you and Broadcom execute a separate written software license |
| 9 | * agreement governing use of this software, this software is licensed |
| 10 | * to you under the terms of the GNU General Public License version 2 |
| 11 | * (the "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, |
| 12 | * with the following added to such license: |
| 13 | * |
| 14 | * As a special exception, the copyright holders of this software give |
| 15 | * you permission to link this software with independent modules, and |
| 16 | * to copy and distribute the resulting executable under terms of your |
| 17 | * choice, provided that you also meet, for each linked independent |
| 18 | * module, the terms and conditions of the license of that module. |
| 19 | * An independent module is a module which is not derived from this |
| 20 | * software. The special exception does not apply to any modifications |
| 21 | * of the software. |
| 22 | * |
| 23 | * Not withstanding the above, under no circumstances may you combine |
| 24 | * this software in any way with any other Broadcom software provided |
| 25 | * under a license other than the GPL, without Broadcom's express prior |
| 26 | * written consent. |
| 27 | * |
| 28 | * :> |
| 29 | * |
| 30 | *****************************************************************************/ |
| 31 | |
| 32 | /** |
| 33 | * @file bal_mac_util_loopback.c |
| 34 | * |
| 35 | * @brief mac util handling for MAC in loopback mode |
| 36 | * |
| 37 | * The loopback mode is handled like a mac protocol, with loopback specific handling |
| 38 | * done as sub-routine calls from the top level handler functions. |
| 39 | * |
| 40 | * @addtogroup mac_util |
| 41 | */ |
| 42 | |
| 43 | /*@{*/ |
| 44 | |
| 45 | #include <bal_mac_util.h> |
| 46 | #include <bal_mac_util_common_itu_pon.h> |
| 47 | #include <bal_worker.h> |
| 48 | |
| 49 | |
| 50 | /** |
| 51 | * @brief access terminal set for loopback |
| 52 | */ |
| 53 | bcmos_errno mac_util_access_terminal_set_for_loopback (acc_term_inst *p_acc_term, bal_util_oper_acc_term op_type, bcmolt_devid device_id) |
| 54 | { |
| 55 | bcmos_errno rc = BCM_ERR_OK; |
| 56 | |
| 57 | bcmos_usleep(1000000); |
| 58 | mac_util_report_acc_term_event(BCMOLT_DEVICE_AUTO_ID_CONNECTION_COMPLETE); |
| 59 | |
| 60 | return rc; |
| 61 | } |
| 62 | |
| 63 | |
| 64 | /** |
| 65 | * @brief set interface for loopback mode |
| 66 | * |
| 67 | * @param p_interface_inst Pointer to interface instance |
| 68 | * @param op_type Operation type on access terminal/interface instance |
| 69 | * |
| 70 | * @return bcmos_errno |
| 71 | * |
| 72 | */ |
| 73 | bcmos_errno mac_util_interface_set_for_loopback(acc_term_interface *p_interface_inst, bal_util_oper_if op_type) |
| 74 | { |
| 75 | bcmos_errno rc = BCM_ERR_OK; |
| 76 | bcmbal_interface_key intf_key = p_interface_inst->api_req_int_obj_info.key; |
| 77 | bcmbal_interface_cfg *p_interface_req = &(p_interface_inst->api_req_int_obj_info); |
| 78 | |
| 79 | p_interface_req = &(p_interface_inst->api_req_int_obj_info); |
| 80 | |
| 81 | /* If the user didn't specify a transceiver, then use the default */ |
| 82 | if (BCMOS_FALSE == BCMBAL_CFG_PROP_IS_SET(p_interface_req, interface, transceiver_type)) |
| 83 | { |
| 84 | BCMBAL_CFG_PROP_SET(p_interface_req, interface, transceiver_type, BCMBAL_MAC_UTIL_TRX_TYPE_DEFAULT_GPON); |
| 85 | } |
| 86 | |
| 87 | mac_util_report_if_event(intf_key.intf_id, |
| 88 | intf_key.intf_type, |
| 89 | BCM_ERR_OK, BCMOLT_RESULT_SUCCESS, |
| 90 | ((BAL_UTIL_OPER_IF_UP == op_type) ? BCMOLT_PON_STATE_ACTIVE_WORKING : BCMOLT_PON_STATE_INACTIVE)); |
| 91 | |
| 92 | |
| 93 | return rc; |
| 94 | } |
| 95 | |
| 96 | |
| 97 | /** |
| 98 | * @brief Set subscriber terminal for loopback mode |
| 99 | * |
| 100 | * @param p_sub_term_inst A pointer to a subscriber terminal instance |
| 101 | * @param op_type Type of operation being performed on the subscriber terminal instance |
| 102 | * @param is_post_discovery Used for ADD, indicates if this request is after a ONU Discovery |
| 103 | * |
| 104 | * @return bcmos_errno |
| 105 | */ |
| 106 | bcmos_errno mac_util_subscriber_terminal_set_for_loopback(sub_term_inst *p_sub_term_inst, bal_util_oper_sub_term op_type, bcmos_bool is_post_discovery) |
| 107 | { |
| 108 | bcmos_errno rc = BCM_ERR_OK; |
| 109 | bcmbal_subscriber_terminal_cfg *p_sub_term_req = &p_sub_term_inst->api_req_sub_term_info; |
| 110 | |
| 111 | |
| 112 | mac_util_report_sub_term_event(p_sub_term_req->key.intf_id, |
| 113 | p_sub_term_req->key.sub_term_id, |
| 114 | (bcmolt_serial_number *)NULL, |
| 115 | (BAL_UTIL_OPER_SUB_TERM_ADD == op_type ? BAL_UTIL_OPER_SUB_TERM_ADD : BAL_UTIL_OPER_SUB_TERM_REMOVE), |
| 116 | BCM_ERR_OK, BCMOLT_RESULT_SUCCESS, |
| 117 | (BAL_UTIL_OPER_SUB_TERM_ADD == op_type ? BCMOLT_ACTIVATION_FAIL_REASON_NONE : BCMOLT_RESULT_SUCCESS), BCMBAL_INVALID_TUNNEL_ID); |
| 118 | |
| 119 | return rc; |
| 120 | } |
| 121 | |
| 122 | |
| 123 | /** |
| 124 | * @brief set flow for loopback mode |
| 125 | */ |
| 126 | bcmos_errno mac_util_flow_set_for_loopback(bcmbal_flow_cfg *p_flow_req, bal_util_oper_flow op_type, flow_inst *p_flow_core) |
| 127 | { |
| 128 | bcmos_errno rc = BCM_ERR_OK; |
| 129 | |
| 130 | if (BAL_UTIL_OPER_FLOW_ADD == op_type) |
| 131 | { |
| 132 | mac_util_report_flow_add_success(p_flow_req->key, p_flow_req->data.access_int_id); |
| 133 | } |
| 134 | else if ((BAL_UTIL_OPER_FLOW_REMOVE == op_type) || (BAL_UTIL_OPER_FLOW_CLEAR == op_type)) |
| 135 | { |
| 136 | mac_util_report_flow_remove_success(p_flow_req->key, p_flow_req->data.access_int_id, op_type); |
| 137 | } |
| 138 | else |
| 139 | { |
| 140 | rc = BCM_ERR_INVALID_OP; |
| 141 | } |
| 142 | |
| 143 | |
| 144 | return rc; |
| 145 | } |
| 146 | |
| 147 | |
| 148 | |
| 149 | /*@}*/ |