core/eapol.go - voltha-bbsim - Gitiles

 /*
  * Copyright 2018-present Open Networking Foundation

  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at

  * http://www.apache.org/licenses/LICENSE-2.0

  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */

 package core

 import (
 	"context"
 	"crypto/md5"
 	"encoding/hex"
 	"errors"
 	"fmt"
 	log "github.com/sirupsen/logrus"
 	"net"
 	"sync"
 	"time"

 	"github.com/google/gopacket"
 	"github.com/google/gopacket/layers"
 	"github.com/opencord/voltha-bbsim/common/logger"
 )

 type clientState int

 // Constants for eapol states
 const (
 	EAP_START clientState = iota + 1 // TODO: This state definition should support 802.1X
 	EAP_RESPID
 	EAP_RESPCHA
 	EAP_SUCCESS
 )

 func (eap clientState) String() string  {
 	return [...]string{"EAP_START", "EAP_RESPID", "EAP_RESPCHA", "EAP_SUCCESS"}[eap]
 }

 type eapResponder struct {
 	clients map[clientKey]*eapClientInstance
 	eapolIn chan *byteMsg
 }

 type clientInstance interface {
 	transitState(cur clientState, recvbytes []byte) (next clientState, sendbytes []byte, err error)
 	getState() clientState
 	getKey() clientKey
 }

 type eapClientInstance struct {
 	key      clientKey
 	srcaddr  *net.HardwareAddr
 	version  uint8
 	curId    uint8
 	curState clientState
 }

 type clientKey struct {
 	intfid uint32
 	onuid  uint32
 }

 var resp *eapResponder
 var once sync.Once

 func getEAPResponder() *eapResponder {
 	once.Do(func() {
 		resp = &eapResponder{clients: make(map[clientKey]*eapClientInstance), eapolIn: nil}
 	})
 	return resp
 }

 // RunEapolResponder starts go routine which processes and responds for received eapol messages
 func RunEapolResponder(ctx context.Context, eapolOut chan *byteMsg, eapolIn chan *byteMsg, errch chan error) {
 	responder := getEAPResponder()
 	responder.eapolIn = eapolIn

 	go func() {
 		logger.Debug("EAPOL response process starts")
 		defer logger.Debug("EAPOL response process was done")
 		for {
 			select {
 			case msg := <-eapolOut:
 				logger.Debug("Received eapol from eapolOut intfid:%d onuid:%d", msg.IntfId, msg.OnuId)
 				responder := getEAPResponder()
 				clients := responder.clients
 				if c, ok := clients[clientKey{intfid: msg.IntfId, onuid: msg.OnuId}]; ok {
 					logger.Debug("Got client intfid:%d onuid: %d (ClientID: %v)", c.key.intfid, c.key.onuid, c.curId)
 					nextstate := respondMessage("EAPOL", *c, msg, eapolIn)
 					c.updateState(nextstate)
 				} else {
 					logger.WithFields(log.Fields{
 						"clients": clients,
 					}).Errorf("Failed to find eapol client instance intfid:%d onuid:%d", msg.IntfId, msg.OnuId)
 				}
 			case <-ctx.Done():
 				return
 			}
 		}
 	}()
 }

 func respondMessage(msgtype string, client clientInstance, recvmsg *byteMsg, msgInCh chan *byteMsg) clientState {
 	curstate := client.getState()
 	nextstate, sendbytes, err := client.transitState(curstate, recvmsg.Byte)

 	if err != nil {
 		msg := fmt.Sprintf("Failed to transitState in %s: %s", msgtype, err)
 		logger.Error(msg, err)
 	}

 	if sendbytes != nil {
 		key := client.getKey()
 		if err := sendBytes(key, sendbytes, msgInCh); err != nil {
 			msg := fmt.Sprintf("Failed to sendBytes in %s: %s", msgtype, err)
 			logger.Error(msg)
 		}
 	} else {
 		logger.Debug("sendbytes is nil")
 	}
 	return nextstate
 }

 func sendEAPStart(intfid uint32, onuid uint32, client eapClientInstance, bytes []byte, eapolIn chan *byteMsg) error {
 	for {
 		responder := getEAPResponder()
 		clients := responder.clients
 		if c, ok := clients[clientKey{intfid: intfid, onuid: onuid}]; ok {
 			if c.curState == EAP_SUCCESS {
 				logger.WithFields(log.Fields{
 					"int_id": intfid,
 					"onu_id": onuid,
 				}).Debug("EAP_SUCCESS received, stop retrying")
 				break
 			}
 		} else {
 			logger.WithFields(log.Fields{
 				"clients": clients,
 			}).Errorf("Failed to find eapol client instance intfid:%d onuid:%d (sendEAPStart)", intfid, onuid)
 		}
 		if err := sendBytes(clientKey{intfid, onuid}, bytes, eapolIn); err != nil {
 			return errors.New("Failed to send EAPStart")
 		}
 		logger.WithFields(log.Fields{
 			"int_id": intfid,
 			"onu_id": onuid,
 			"eapolIn": eapolIn,
 			"bytes": bytes,
 		}).Debug("EAPStart Sent")
 		time.Sleep(30 * time.Second)
 	}
 	return nil
 }

 func startEAPClient(intfid uint32, onuid uint32) error {
 	client := eapClientInstance{key: clientKey{intfid: intfid, onuid: onuid},
 		srcaddr:  &net.HardwareAddr{0x2e, 0x60, 0x70, 0x13, 0x07, byte(onuid)},
 		version:  1,
 		curId:    0,
 		curState: EAP_START}

 	eap := client.createEAPStart()
 	bytes := client.createEAPOL(eap)
 	resp := getEAPResponder()
 	eapolIn := resp.eapolIn
 	// start a loop that keeps sending EAPOL packets until it succeeds
 	go sendEAPStart(intfid, onuid, client, bytes, eapolIn)
 	// clients[key{intfid: intfid, onuid: onuid}] = &client
 	resp.clients[clientKey{intfid: intfid, onuid: onuid}] = &client
 	return nil
 }

 func (c eapClientInstance) transitState(cur clientState, recvbytes []byte) (next clientState, respbytes []byte, err error) {
 	recvpkt := gopacket.NewPacket(recvbytes, layers.LayerTypeEthernet, gopacket.Default)
 	eap, err := extractEAP(recvpkt)
 	if err != nil {
 		return cur, nil, nil
 	}
 	if eap.Code == layers.EAPCodeRequest && eap.Type == layers.EAPTypeIdentity {
 		logger.Debug("Received EAP-Request/Identity")
 		logger.Debug(recvpkt.Dump())
 		c.curId = eap.Id
 		if cur == EAP_START {
 			reseap := c.createEAPResID()
 			pkt := c.createEAPOL(reseap)
 			logger.Debug("Moving from EAP_START to EAP_RESPID")
 			return EAP_RESPID, pkt, nil
 		}
 	} else if eap.Code == layers.EAPCodeRequest && eap.Type == layers.EAPTypeOTP {
 		logger.Debug("Received EAP-Request/Challenge")
 		logger.Debug(recvpkt.Dump())
 		if cur == EAP_RESPID {
 			c.curId = eap.Id
 			senddata := getMD5Data(c.curId, eap)
 			senddata = append([]byte{0x10}, senddata...)
 			sendeap := c.createEAPResCha(senddata)
 			pkt := c.createEAPOL(sendeap)
 			logger.Debug("Moving from EAP_RESPID to EAP_RESPCHA")
 			return EAP_RESPCHA, pkt, nil
 		}
 	} else if eap.Code == layers.EAPCodeSuccess && eap.Type == layers.EAPTypeNone {
 		logger.Debug("Received EAP-Success")
 		logger.Debug(recvpkt.Dump())
 		if cur == EAP_RESPCHA {
 			logger.Debug("Moving from EAP_RESPCHA to EAP_SUCCESS")
 			return EAP_SUCCESS, nil, nil
 		}
 	} else {
 		logger.Debug("Received unsupported EAP")
 		return cur, nil, nil
 	}
 	logger.Debug("State transition does not support..current state:%d", cur)
 	logger.Debug(recvpkt.Dump())
 	return cur, nil, nil
 }

 func (c eapClientInstance) getState() clientState {
 	return c.curState
 }

 func (c *eapClientInstance) updateState(state clientState) {
 	msg := fmt.Sprintf("EAP update state intfid:%d onuid:%d state:%d", c.key.intfid, c.key.onuid, state)
 	logger.Debug(msg)
 	c.curState = state
 }

 func (c eapClientInstance) getKey() clientKey {
 	return c.key
 }

 func sendBytes(key clientKey, pkt []byte, chIn chan *byteMsg) error {
 	// Send our packet
 	msg := byteMsg{IntfId: key.intfid,
 		OnuId: key.onuid,
 		Byte:  pkt}
 	chIn <- &msg
 	logger.Debug("sendBytes intfid:%d onuid:%d", key.intfid, key.onuid)
 	logger.Debug(hex.Dump(msg.Byte))
 	return nil
 }

 func (c *eapClientInstance) createEAPOL(eap *layers.EAP) []byte {
 	buffer := gopacket.NewSerializeBuffer()
 	options := gopacket.SerializeOptions{}

 	ethernetLayer := &layers.Ethernet{
 		SrcMAC:       *c.srcaddr,
 		DstMAC:       net.HardwareAddr{0x01, 0x80, 0xC2, 0x00, 0x00, 0x03},
 		EthernetType: layers.EthernetTypeEAPOL,
 	}

 	if eap == nil { // EAP Start
 		gopacket.SerializeLayers(buffer, options,
 			ethernetLayer,
 			&layers.EAPOL{Version: c.version, Type: 1, Length: 0},
 		)
 	} else {
 		gopacket.SerializeLayers(buffer, options,
 			ethernetLayer,
 			&layers.EAPOL{Version: c.version, Type: 0, Length: eap.Length},
 			eap,
 		)
 	}
 	bytes := buffer.Bytes()
 	return bytes
 }

 func (c *eapClientInstance) createEAPStart() *layers.EAP {
 	return nil
 }

 func (c *eapClientInstance) createEAPResID() *layers.EAP {
 	eap := layers.EAP{Code: layers.EAPCodeResponse,
 		Id:       c.curId,
 		Length:   9,
 		Type:     layers.EAPTypeIdentity,
 		TypeData: []byte{0x75, 0x73, 0x65, 0x72}}
 	return &eap
 }

 func (c *eapClientInstance) createEAPResCha(payload []byte) *layers.EAP {
 	eap := layers.EAP{Code: layers.EAPCodeResponse,
 		Id: c.curId, Length: 22,
 		Type:     layers.EAPTypeOTP,
 		TypeData: payload}
 	return &eap
 }

 func getMD5Data(id uint8, eap *layers.EAP) []byte {
 	i := byte(id)
 	C := []byte(eap.BaseLayer.Contents)[6:]
 	P := []byte{i, 0x70, 0x61, 0x73, 0x73, 0x77, 0x6f, 0x72, 0x64} // "password"
 	data := md5.Sum(append(P, C...))
 	ret := make([]byte, 16)
 	for j := 0; j < 16; j++ {
 		ret[j] = data[j]
 	}
 	return ret
 }

 func extractEAPOL(pkt gopacket.Packet) (*layers.EAPOL, error) {
 	layerEAPOL := pkt.Layer(layers.LayerTypeEAPOL)
 	eapol, _ := layerEAPOL.(*layers.EAPOL)
 	if eapol == nil {
 		return nil, errors.New("Cannot extract EAPOL")
 	}
 	return eapol, nil
 }

 func extractEAP(pkt gopacket.Packet) (*layers.EAP, error) {
 	layerEAP := pkt.Layer(layers.LayerTypeEAP)
 	eap, _ := layerEAP.(*layers.EAP)
 	if eap == nil {
 		return nil, errors.New("Cannot extract EAP")
 	}
 	return eap, nil
 }
	/*
	* Copyright 2018-present Open Networking Foundation

	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at

	* http://www.apache.org/licenses/LICENSE-2.0

	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*/

	package core

	import (
	"context"
	"crypto/md5"
	"encoding/hex"
	"errors"
	"fmt"
	log "github.com/sirupsen/logrus"
	"net"
	"sync"
	"time"

	"github.com/google/gopacket"
	"github.com/google/gopacket/layers"
	"github.com/opencord/voltha-bbsim/common/logger"
	)

	type clientState int

	// Constants for eapol states
	const (
	EAP_START clientState = iota + 1 // TODO: This state definition should support 802.1X
	EAP_RESPID
	EAP_RESPCHA
	EAP_SUCCESS
	)

	func (eap clientState) String() string {
	return [...]string{"EAP_START", "EAP_RESPID", "EAP_RESPCHA", "EAP_SUCCESS"}[eap]
	}

	type eapResponder struct {
	clients map[clientKey]*eapClientInstance
	eapolIn chan *byteMsg
	}

	type clientInstance interface {
	transitState(cur clientState, recvbytes []byte) (next clientState, sendbytes []byte, err error)
	getState() clientState
	getKey() clientKey
	}

	type eapClientInstance struct {
	key clientKey
	srcaddr *net.HardwareAddr
	version uint8
	curId uint8
	curState clientState
	}

	type clientKey struct {
	intfid uint32
	onuid uint32
	}

	var resp *eapResponder
	var once sync.Once

	func getEAPResponder() *eapResponder {
	once.Do(func() {
	resp = &eapResponder{clients: make(map[clientKey]*eapClientInstance), eapolIn: nil}
	})
	return resp
	}

	// RunEapolResponder starts go routine which processes and responds for received eapol messages
	func RunEapolResponder(ctx context.Context, eapolOut chan byteMsg, eapolIn chan byteMsg, errch chan error) {
	responder := getEAPResponder()
	responder.eapolIn = eapolIn

	go func() {
	logger.Debug("EAPOL response process starts")
	defer logger.Debug("EAPOL response process was done")
	for {
	select {
	case msg := <-eapolOut:
	logger.Debug("Received eapol from eapolOut intfid:%d onuid:%d", msg.IntfId, msg.OnuId)
	responder := getEAPResponder()
	clients := responder.clients
	if c, ok := clients[clientKey{intfid: msg.IntfId, onuid: msg.OnuId}]; ok {
	logger.Debug("Got client intfid:%d onuid: %d (ClientID: %v)", c.key.intfid, c.key.onuid, c.curId)
	nextstate := respondMessage("EAPOL", *c, msg, eapolIn)
	c.updateState(nextstate)
	} else {
	logger.WithFields(log.Fields{
	"clients": clients,
	}).Errorf("Failed to find eapol client instance intfid:%d onuid:%d", msg.IntfId, msg.OnuId)
	}
	case <-ctx.Done():
	return
	}
	}
	}()
	}

	func respondMessage(msgtype string, client clientInstance, recvmsg byteMsg, msgInCh chan byteMsg) clientState {
	curstate := client.getState()
	nextstate, sendbytes, err := client.transitState(curstate, recvmsg.Byte)

	if err != nil {
	msg := fmt.Sprintf("Failed to transitState in %s: %s", msgtype, err)
	logger.Error(msg, err)
	}

	if sendbytes != nil {
	key := client.getKey()
	if err := sendBytes(key, sendbytes, msgInCh); err != nil {
	msg := fmt.Sprintf("Failed to sendBytes in %s: %s", msgtype, err)
	logger.Error(msg)
	}
	} else {
	logger.Debug("sendbytes is nil")
	}
	return nextstate
	}

	func sendEAPStart(intfid uint32, onuid uint32, client eapClientInstance, bytes []byte, eapolIn chan *byteMsg) error {
	for {
	responder := getEAPResponder()
	clients := responder.clients
	if c, ok := clients[clientKey{intfid: intfid, onuid: onuid}]; ok {
	if c.curState == EAP_SUCCESS {
	logger.WithFields(log.Fields{
	"int_id": intfid,
	"onu_id": onuid,
	}).Debug("EAP_SUCCESS received, stop retrying")
	break
	}
	} else {
	logger.WithFields(log.Fields{
	"clients": clients,
	}).Errorf("Failed to find eapol client instance intfid:%d onuid:%d (sendEAPStart)", intfid, onuid)
	}
	if err := sendBytes(clientKey{intfid, onuid}, bytes, eapolIn); err != nil {
	return errors.New("Failed to send EAPStart")
	}
	logger.WithFields(log.Fields{
	"int_id": intfid,
	"onu_id": onuid,
	"eapolIn": eapolIn,
	"bytes": bytes,
	}).Debug("EAPStart Sent")
	time.Sleep(30 * time.Second)
	}
	return nil
	}

	func startEAPClient(intfid uint32, onuid uint32) error {
	client := eapClientInstance{key: clientKey{intfid: intfid, onuid: onuid},
	srcaddr: &net.HardwareAddr{0x2e, 0x60, 0x70, 0x13, 0x07, byte(onuid)},
	version: 1,
	curId: 0,
	curState: EAP_START}

	eap := client.createEAPStart()
	bytes := client.createEAPOL(eap)
	resp := getEAPResponder()
	eapolIn := resp.eapolIn
	// start a loop that keeps sending EAPOL packets until it succeeds
	go sendEAPStart(intfid, onuid, client, bytes, eapolIn)
	// clients[key{intfid: intfid, onuid: onuid}] = &client
	resp.clients[clientKey{intfid: intfid, onuid: onuid}] = &client
	return nil
	}

	func (c eapClientInstance) transitState(cur clientState, recvbytes []byte) (next clientState, respbytes []byte, err error) {
	recvpkt := gopacket.NewPacket(recvbytes, layers.LayerTypeEthernet, gopacket.Default)
	eap, err := extractEAP(recvpkt)
	if err != nil {
	return cur, nil, nil
	}
	if eap.Code == layers.EAPCodeRequest && eap.Type == layers.EAPTypeIdentity {
	logger.Debug("Received EAP-Request/Identity")
	logger.Debug(recvpkt.Dump())
	c.curId = eap.Id
	if cur == EAP_START {
	reseap := c.createEAPResID()
	pkt := c.createEAPOL(reseap)
	logger.Debug("Moving from EAP_START to EAP_RESPID")
	return EAP_RESPID, pkt, nil
	}
	} else if eap.Code == layers.EAPCodeRequest && eap.Type == layers.EAPTypeOTP {
	logger.Debug("Received EAP-Request/Challenge")
	logger.Debug(recvpkt.Dump())
	if cur == EAP_RESPID {
	c.curId = eap.Id
	senddata := getMD5Data(c.curId, eap)
	senddata = append([]byte{0x10}, senddata...)
	sendeap := c.createEAPResCha(senddata)
	pkt := c.createEAPOL(sendeap)
	logger.Debug("Moving from EAP_RESPID to EAP_RESPCHA")
	return EAP_RESPCHA, pkt, nil
	}
	} else if eap.Code == layers.EAPCodeSuccess && eap.Type == layers.EAPTypeNone {
	logger.Debug("Received EAP-Success")
	logger.Debug(recvpkt.Dump())
	if cur == EAP_RESPCHA {
	logger.Debug("Moving from EAP_RESPCHA to EAP_SUCCESS")
	return EAP_SUCCESS, nil, nil
	}
	} else {
	logger.Debug("Received unsupported EAP")
	return cur, nil, nil
	}
	logger.Debug("State transition does not support..current state:%d", cur)
	logger.Debug(recvpkt.Dump())
	return cur, nil, nil
	}

	func (c eapClientInstance) getState() clientState {
	return c.curState
	}

	func (c *eapClientInstance) updateState(state clientState) {
	msg := fmt.Sprintf("EAP update state intfid:%d onuid:%d state:%d", c.key.intfid, c.key.onuid, state)
	logger.Debug(msg)
	c.curState = state
	}

	func (c eapClientInstance) getKey() clientKey {
	return c.key
	}

	func sendBytes(key clientKey, pkt []byte, chIn chan *byteMsg) error {
	// Send our packet
	msg := byteMsg{IntfId: key.intfid,
	OnuId: key.onuid,
	Byte: pkt}
	chIn <- &msg
	logger.Debug("sendBytes intfid:%d onuid:%d", key.intfid, key.onuid)
	logger.Debug(hex.Dump(msg.Byte))
	return nil
	}

	func (c eapClientInstance) createEAPOL(eap layers.EAP) []byte {
	buffer := gopacket.NewSerializeBuffer()
	options := gopacket.SerializeOptions{}

	ethernetLayer := &layers.Ethernet{
	SrcMAC: *c.srcaddr,
	DstMAC: net.HardwareAddr{0x01, 0x80, 0xC2, 0x00, 0x00, 0x03},
	EthernetType: layers.EthernetTypeEAPOL,
	}

	if eap == nil { // EAP Start
	gopacket.SerializeLayers(buffer, options,
	ethernetLayer,
	&layers.EAPOL{Version: c.version, Type: 1, Length: 0},
	)
	} else {
	gopacket.SerializeLayers(buffer, options,
	ethernetLayer,
	&layers.EAPOL{Version: c.version, Type: 0, Length: eap.Length},
	eap,
	)
	}
	bytes := buffer.Bytes()
	return bytes
	}

	func (c eapClientInstance) createEAPStart() layers.EAP {
	return nil
	}

	func (c eapClientInstance) createEAPResID() layers.EAP {
	eap := layers.EAP{Code: layers.EAPCodeResponse,
	Id: c.curId,
	Length: 9,
	Type: layers.EAPTypeIdentity,
	TypeData: []byte{0x75, 0x73, 0x65, 0x72}}
	return &eap
	}

	func (c eapClientInstance) createEAPResCha(payload []byte) layers.EAP {
	eap := layers.EAP{Code: layers.EAPCodeResponse,
	Id: c.curId, Length: 22,
	Type: layers.EAPTypeOTP,
	TypeData: payload}
	return &eap
	}

	func getMD5Data(id uint8, eap *layers.EAP) []byte {
	i := byte(id)
	C := []byte(eap.BaseLayer.Contents)[6:]
	P := []byte{i, 0x70, 0x61, 0x73, 0x73, 0x77, 0x6f, 0x72, 0x64} // "password"
	data := md5.Sum(append(P, C...))
	ret := make([]byte, 16)
	for j := 0; j < 16; j++ {
	ret[j] = data[j]
	}
	return ret
	}

	func extractEAPOL(pkt gopacket.Packet) (*layers.EAPOL, error) {
	layerEAPOL := pkt.Layer(layers.LayerTypeEAPOL)
	eapol, _ := layerEAPOL.(*layers.EAPOL)
	if eapol == nil {
	return nil, errors.New("Cannot extract EAPOL")
	}
	return eapol, nil
	}

	func extractEAP(pkt gopacket.Packet) (*layers.EAP, error) {
	layerEAP := pkt.Layer(layers.LayerTypeEAP)
	eap, _ := layerEAP.(*layers.EAP)
	if eap == nil {
	return nil, errors.New("Cannot extract EAP")
	}
	return eap, nil
	}