Makefile - voltha-docs - Gitiles

 # -*- makefile -*-
 # -----------------------------------------------------------------------
 # Copyright 2022-2023 Open Networking Foundation (ONF) and the ONF Contributors
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at
 #
 # http://www.apache.org/licenses/LICENSE-2.0
 #
 # Unless required by applicable law or agreed to in writing, software
 # distributed under the License is distributed on an "AS IS" BASIS,
 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 # See the License for the specific language governing permissions and
 # limitations under the License.
 # -----------------------------------------------------------------------
 # Makefile for Sphinx documentation

 .DEFAULT_GOAL := help

 ##-------------------##
 ##---]  GLOBALS  [---##
 ##-------------------##
 TOP ?=$(strip $(dir $(abspath $(lastword $(MAKEFILE_LIST))) ) )

 ##--------------------##
 ##---]  INCLUDES  [---##
 ##--------------------##
 include $(TOP)/config.mk#                # configure
 include $(TOP)/makefiles/include.mk      # top level include

 # You can set these variables from the command line.
 SPHINXOPTS   ?=
 SPHINXBUILD  ?= sphinx-build
 SOURCEDIR    ?= .
 BUILDDIR     ?= _build

 # Other repos with documentation to include.
 # edit the `git_refs` file with the commit/tag/branch that you want to use
 OTHER_REPO_DOCS ?= bbsim cord-tester ofagent-go openolt voltctl voltha-openolt-adapter voltha-openonu-adapter-go voltha-protos voltha-system-tests device-management-interface voltha-helm-charts

 ifdef NO_OTHER_REPO_DOCS
   # Inhibit pulling in external repos.
   # python 3.10+ patching not supported by all repos yet.
   OTHER_REPO_DOCS := $(null)
 endif

 # Static docs, built by other means (usually robot framework)
 STATIC_DOCS    := _static/voltha-system-tests _static/cord-tester

 # Why is existing source Makefile PHONY (?)
 .PHONY: help test lint reload Makefile prep

 ## -----------------------------------------------------------------------
 ## Intent: Real time viewing, dynamically generate and reload document
 ##         changes for web browser viewing.
 ## Usage:
 ##   make reload
 ## -----------------------------------------------------------------------
 reload: $(venv-activate-patched)
 	$(activate) && sphinx-reload $(SOURCEDIR)

 ## -----------------------------------------------------------------------
 ## Intent: lint and link verification. linkcheck is part of sphinx
 ## See Also: make test-errors
 ## -----------------------------------------------------------------------
 test: lint linkcheck

 # [TODO] relocate into repo:onf-make/
 lint      : $(venv-activate-patched)
 linkcheck : $(venv-activate-patched)

 ## -----------------------------------------------------------------------
 ## Intent: Exercise all generation targets
 ## Bridge: library workaround to support legacy targets
 ## -----------------------------------------------------------------------
 test-all-targets += html
 test-all-targets += coverage
 # test-all-targets += changes
 # test-all-targets += info
 test-all-targets += man
 test-all-targe4ts += text
 # test-all-targets += latex

 test-all : test
 	$(MAKE) $(test-all-targets)

 # doctest
 # coverage
 # linkcheck

 #  currently not enabled, should be added to lint target
 LINT_STYLE ?= mdl_strict.rb
 md-lint: | $(OTHER_REPO_DOCS)
 	@echo "markdownlint(mdl) version: `mdl --version`"
 	@echo "style config:"
 	@echo "---"
 	@cat $(LINT_STYLE)
 	@echo "---"
 	mdl -s $(LINT_STYLE) `find -L $(SOURCEDIR) ! -path "./_$(venv-activate-script)/*" ! -path "./_build/*" ! -path "./repos/*" ! -path "*vendor*" -name "*.md"`

 # clean up
 clean ::
 	$(RM) -r $(BUILDDIR) $(OTHER_REPO_DOCS) $(STATIC_DOCS)

 clean-all sterile :: clean
 	$(RM) -r $(venv-activate-script) repos

 # checkout the repos inside repos/ dir
 repos:
 	mkdir repos

 # build directory paths in repos/* to perform 'git clone <repo>' into
 CHECKOUT_REPOS   = $(foreach repo,$(OTHER_REPO_DOCS),repos/$(repo))

 # Host holding the git server
 REPO_HOST       ?= https://gerrit.opencord.org

 # For QA patchset validation - set SKIP_CHECKOUT to the repo name and
 # pre-populate it under repos/ with the specific commit to being validated
 SKIP_CHECKOUT   ?=

 # clone (only if doesn't exist)
 $(CHECKOUT_REPOS): | repos
 	if [ ! -d '$@' ] ;\
 	  then git clone $(REPO_HOST)/$(@F) $@ ;\
 	fi

 ## -----------------------------------------------------------------------
 ## Intent: checkout correct ref if not under test, then copy
 ##         subdirectories into main docs dir
 ## -----------------------------------------------------------------------
 $(OTHER_REPO_DOCS): | $(CHECKOUT_REPOS)
 	if [ "$(SKIP_CHECKOUT)" != "$@" ] ;\
 	  then GIT_REF=`grep '^$@ ' git_refs | awk '{print $$3}'` ;\
 	  cd "repos/$@" && git checkout $$GIT_REF ;\
 	fi
 	GIT_SUBDIR=`grep '^$@ ' git_refs | awk '{print $$2}'` ;\
 	cp -r repos/$(@)$$GIT_SUBDIR $@ ;\

 # Build Robot documentation in voltha-system-tests and copy it into _static.
 _static/voltha-system-tests: | $(OTHER_REPO_DOCS)
 	make -C voltha-system-tests gendocs
 	mkdir -p $@
 	cp -r voltha-system-tests/gendocs/* $@

 # Build Robot documentation in cord-tester and copy it into _static.
 _static/cord-tester: | $(OTHER_REPO_DOCS)
 	make -C cord-tester gendocs
 	mkdir -p $@
 	cp -r cord-tester/gendocs/* $@

 ## -----------------------------------------------------------------------
 ## Intent: generate a list of git checksums suitable for updating git_refs
 ## -----------------------------------------------------------------------
 freeze: repos
 	@for repo in $(OTHER_REPO_DOCS) ; do \
 	  GIT_SUBDIR=`grep "^$$repo " git_refs | awk '{print $$2}'` ;\
 	  cd "repos/$$repo" > /dev/null ;\
 	    HEAD_SHA=`git rev-parse HEAD` ;\
 	    printf "%-24s %-8s %-40s\n" $$repo $$GIT_SUBDIR $$HEAD_SHA ;\
 	  cd ../.. ;\
 	done

 ## -----------------------------------------------------------------------
 ## Intent: build multiple versions
 ## -----------------------------------------------------------------------
 multiversion: $(venv-activate-script) Makefile | prep $(OTHER_REPO_DOCS)
 	$(activate)\
  && sphinx-multiversion "$(SOURCEDIR)" "$(BUILDDIR)/multiversion" $(SPHINXOPTS)
 	cp "$(SOURCEDIR)/_templates/meta_refresh.html" "$(BUILDDIR)/multiversion/index.html"

 ## -----------------------------------------------------------------------
 ## Intent: used in sphinx-multiversion to properly link
 ## -----------------------------------------------------------------------
 prep: | $(OTHER_REPO_DOCS) $(STATIC_DOCS)

 ## -----------------------------------------------------------------------
 ## Intent: Forward sphinx supported targets to sphinxbuild.
 ## Bridge: legacy makefile wildcard rule forwarded unknown targets to sphinx.
 ##         library makefiles do more so transfer control only when needed.
 ## -----------------------------------------------------------------------
 include $(ONF_MAKEDIR)/voltha/docs-catchall-targets.mk
 $(voltha-docs-catchall): $(venv-activate-script) Makefile | $(OTHER_REPO_DOCS) $(STATIC_DOCS)
 	@echo " ** CATCHALL: $@"
 	$(activate)\
  && $(SPHINXBUILD) -M $@ "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O)

 ## -----------------------------------------------------------------------
 ## Intent: Display makefile target help
 ## -----------------------------------------------------------------------
 help :: $(venv-activate-script)
 	@ echo
 	$(HIDE)$(activate) \
  && $(SPHINXBUILD) -M help "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O)

 ## -----------------------------------------------------------------------
 ## Intent: Display WARNINGS buried in sphinx output
 ## -----------------------------------------------------------------------
 warnings-log := warnings.log
 warnings: sterile
 	$(MAKE) html 2>&1 \
 	    | sed -e 's@\([Ww][Aa][Rr][Nn][Ii][Nn][Gg]\)@\n\1@g' \
 	    > "$(warnings-log)"
 	grep 'WARNING' $(warnings-log)

 ## -----------------------------------------------------------------------
 ## Intent: Summarize linkcheck failures
 ## -----------------------------------------------------------------------
 .PHONY: broken-log
 broken-log := broken.log
 broken-log : sterile
 	$(MAKE) linkcheck 2>&1 | tee "$(broken-log)"
 	! grep broken "$(broken-log)"
 	grep -i error _build/linkcheck/output.txt

 ## -----------------------------------------------------------------------
 ## Intent:
 ## -----------------------------------------------------------------------
 clean::
 	$(RM) $(broken-log)
 	$(RM) $(warnings-log)

 ## -----------------------------------------------------------------------
 ## Intent:
 ## -----------------------------------------------------------------------
 help ::
 	@echo "  warnings              Display WARNING strings buried in sphinx output"

 ## -----------------------------------------------------------------------
 ## Intent: Display make hel footer
 ## -----------------------------------------------------------------------
 include $(ONF_MAKEDIR)/help/trailer.mk

 # [EOF]
	# -- makefile --
	# -----------------------------------------------------------------------
	# Copyright 2022-2023 Open Networking Foundation (ONF) and the ONF Contributors
	#
	# Licensed under the Apache License, Version 2.0 (the "License");
	# you may not use this file except in compliance with the License.
	# You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.
	# -----------------------------------------------------------------------
	# Makefile for Sphinx documentation

	.DEFAULT_GOAL := help

	##-------------------##
	##---] GLOBALS [---##
	##-------------------##
	TOP ?=$(strip $(dir $(abspath $(lastword $(MAKEFILE_LIST))) ) )

	##--------------------##
	##---] INCLUDES [---##
	##--------------------##
	include $(TOP)/config.mk# # configure
	include $(TOP)/makefiles/include.mk # top level include

	# You can set these variables from the command line.
	SPHINXOPTS ?=
	SPHINXBUILD ?= sphinx-build
	SOURCEDIR ?= .
	BUILDDIR ?= _build

	# Other repos with documentation to include.
	# edit the `git_refs` file with the commit/tag/branch that you want to use
	OTHER_REPO_DOCS ?= bbsim cord-tester ofagent-go openolt voltctl voltha-openolt-adapter voltha-openonu-adapter-go voltha-protos voltha-system-tests device-management-interface voltha-helm-charts

	ifdef NO_OTHER_REPO_DOCS
	# Inhibit pulling in external repos.
	# python 3.10+ patching not supported by all repos yet.
	OTHER_REPO_DOCS := $(null)
	endif

	# Static docs, built by other means (usually robot framework)
	STATIC_DOCS := _static/voltha-system-tests _static/cord-tester

	# Why is existing source Makefile PHONY (?)
	.PHONY: help test lint reload Makefile prep

	## -----------------------------------------------------------------------
	## Intent: Real time viewing, dynamically generate and reload document
	## changes for web browser viewing.
	## Usage:
	## make reload
	## -----------------------------------------------------------------------
	reload: $(venv-activate-patched)
	$(activate) && sphinx-reload $(SOURCEDIR)

	## -----------------------------------------------------------------------
	## Intent: lint and link verification. linkcheck is part of sphinx
	## See Also: make test-errors
	## -----------------------------------------------------------------------
	test: lint linkcheck

	# [TODO] relocate into repo:onf-make/
	lint : $(venv-activate-patched)
	linkcheck : $(venv-activate-patched)

	## -----------------------------------------------------------------------
	## Intent: Exercise all generation targets
	## Bridge: library workaround to support legacy targets
	## -----------------------------------------------------------------------
	test-all-targets += html
	test-all-targets += coverage
	# test-all-targets += changes
	# test-all-targets += info
	test-all-targets += man
	test-all-targe4ts += text
	# test-all-targets += latex

	test-all : test
	$(MAKE) $(test-all-targets)

	# doctest
	# coverage
	# linkcheck

	# currently not enabled, should be added to lint target
	LINT_STYLE ?= mdl_strict.rb
	md-lint: \| $(OTHER_REPO_DOCS)
	@echo "markdownlint(mdl) version: `mdl --version`"
	@echo "style config:"
	@echo "---"
	@cat $(LINT_STYLE)
	@echo "---"
	mdl -s $(LINT_STYLE) `find -L $(SOURCEDIR) ! -path "./_$(venv-activate-script)/" ! -path "./_build/" ! -path "./repos/" ! -path "vendor" -name ".md"`

	# clean up
	clean ::
	$(RM) -r $(BUILDDIR) $(OTHER_REPO_DOCS) $(STATIC_DOCS)

	clean-all sterile :: clean
	$(RM) -r $(venv-activate-script) repos

	# checkout the repos inside repos/ dir
	repos:
	mkdir repos

	# build directory paths in repos/* to perform 'git clone <repo>' into
	CHECKOUT_REPOS = $(foreach repo,$(OTHER_REPO_DOCS),repos/$(repo))

	# Host holding the git server
	REPO_HOST ?= https://gerrit.opencord.org

	# For QA patchset validation - set SKIP_CHECKOUT to the repo name and
	# pre-populate it under repos/ with the specific commit to being validated
	SKIP_CHECKOUT ?=

	# clone (only if doesn't exist)
	$(CHECKOUT_REPOS): \| repos
	if [ ! -d '$@' ] ;\
	then git clone $(REPO_HOST)/$(@F) $@ ;\
	fi

	## -----------------------------------------------------------------------
	## Intent: checkout correct ref if not under test, then copy
	## subdirectories into main docs dir
	## -----------------------------------------------------------------------
	$(OTHER_REPO_DOCS): \| $(CHECKOUT_REPOS)
	if [ "$(SKIP_CHECKOUT)" != "$@" ] ;\
	then GIT_REF=`grep '^$@ ' git_refs \| awk '{print $$3}'` ;\
	cd "repos/$@" && git checkout $$GIT_REF ;\
	fi
	GIT_SUBDIR=`grep '^$@ ' git_refs \| awk '{print $$2}'` ;\
	cp -r repos/$(@)$$GIT_SUBDIR $@ ;\

	# Build Robot documentation in voltha-system-tests and copy it into _static.
	_static/voltha-system-tests: \| $(OTHER_REPO_DOCS)
	make -C voltha-system-tests gendocs
	mkdir -p $@
	cp -r voltha-system-tests/gendocs/* $@

	# Build Robot documentation in cord-tester and copy it into _static.
	_static/cord-tester: \| $(OTHER_REPO_DOCS)
	make -C cord-tester gendocs
	mkdir -p $@
	cp -r cord-tester/gendocs/* $@

	## -----------------------------------------------------------------------
	## Intent: generate a list of git checksums suitable for updating git_refs
	## -----------------------------------------------------------------------
	freeze: repos
	@for repo in $(OTHER_REPO_DOCS) ; do \
	GIT_SUBDIR=`grep "^$$repo " git_refs \| awk '{print $$2}'` ;\
	cd "repos/$$repo" > /dev/null ;\
	HEAD_SHA=`git rev-parse HEAD` ;\
	printf "%-24s %-8s %-40s\n" $$repo $$GIT_SUBDIR $$HEAD_SHA ;\
	cd ../.. ;\
	done

	## -----------------------------------------------------------------------
	## Intent: build multiple versions
	## -----------------------------------------------------------------------
	multiversion: $(venv-activate-script) Makefile \| prep $(OTHER_REPO_DOCS)
	$(activate)\
	&& sphinx-multiversion "$(SOURCEDIR)" "$(BUILDDIR)/multiversion" $(SPHINXOPTS)
	cp "$(SOURCEDIR)/_templates/meta_refresh.html" "$(BUILDDIR)/multiversion/index.html"

	## -----------------------------------------------------------------------
	## Intent: used in sphinx-multiversion to properly link
	## -----------------------------------------------------------------------
	prep: \| $(OTHER_REPO_DOCS) $(STATIC_DOCS)

	## -----------------------------------------------------------------------
	## Intent: Forward sphinx supported targets to sphinxbuild.
	## Bridge: legacy makefile wildcard rule forwarded unknown targets to sphinx.
	## library makefiles do more so transfer control only when needed.
	## -----------------------------------------------------------------------
	include $(ONF_MAKEDIR)/voltha/docs-catchall-targets.mk
	$(voltha-docs-catchall): $(venv-activate-script) Makefile \| $(OTHER_REPO_DOCS) $(STATIC_DOCS)
	@echo " ** CATCHALL: $@"
	$(activate)\
	&& $(SPHINXBUILD) -M $@ "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O)

	## -----------------------------------------------------------------------
	## Intent: Display makefile target help
	## -----------------------------------------------------------------------
	help :: $(venv-activate-script)
	@ echo
	$(HIDE)$(activate) \
	&& $(SPHINXBUILD) -M help "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O)

	## -----------------------------------------------------------------------
	## Intent: Display WARNINGS buried in sphinx output
	## -----------------------------------------------------------------------
	warnings-log := warnings.log
	warnings: sterile
	$(MAKE) html 2>&1 \
	\| sed -e 's@\([Ww][Aa][Rr][Nn][Ii][Nn][Gg]\)@\n\1@g' \
	> "$(warnings-log)"
	grep 'WARNING' $(warnings-log)

	## -----------------------------------------------------------------------
	## Intent: Summarize linkcheck failures
	## -----------------------------------------------------------------------
	.PHONY: broken-log
	broken-log := broken.log
	broken-log : sterile
	$(MAKE) linkcheck 2>&1 \| tee "$(broken-log)"
	! grep broken "$(broken-log)"
	grep -i error _build/linkcheck/output.txt

	## -----------------------------------------------------------------------
	## Intent:
	## -----------------------------------------------------------------------
	clean::
	$(RM) $(broken-log)
	$(RM) $(warnings-log)

	## -----------------------------------------------------------------------
	## Intent:
	## -----------------------------------------------------------------------
	help ::
	@echo " warnings Display WARNING strings buried in sphinx output"

	## -----------------------------------------------------------------------
	## Intent: Display make hel footer
	## -----------------------------------------------------------------------
	include $(ONF_MAKEDIR)/help/trailer.mk

	# [EOF]