blob: ed5398309adf1949ae0c5799461421728fd88b1a [file] [log] [blame]
# -*- makefile -*-
# -----------------------------------------------------------------------
# Copyright 2022 Open Networking Foundation
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# -----------------------------------------------------------------------
# Makefile for Sphinx documentation
.DEFAULT_GOAL := help
TOP ?= .
MAKEDIR ?= $(TOP)/makefiles
$(if $(VERBOSE),$(eval export VERBOSE=$(VERBOSE))) # visible to include(s)
##--------------------##
##---] INCLUDES [---##
##--------------------##
include $(MAKEDIR)/consts.mk
include $(MAKEDIR)/help/include.mk
include $(MAKEDIR)/patches/include.mk
include $(MAKEDIR)/help/variables.mk
# You can set these variables from the command line.
SPHINXOPTS ?=
SPHINXBUILD ?= sphinx-build
SOURCEDIR ?= .
BUILDDIR ?= _build
# Other repos with documentation to include.
# edit the `git_refs` file with the commit/tag/branch that you want to use
OTHER_REPO_DOCS ?= bbsim cord-tester ofagent-go openolt voltctl voltha-openolt-adapter voltha-openonu-adapter-go voltha-protos voltha-system-tests device-management-interface voltha-helm-charts
ifdef NO_OTHER_REPO_DOCS
# Inhibit pulling in external repos.
# python 3.10+ patching not supported by all repos yet.
OTHER_REPO_DOCS := $(null)
endif
# Static docs, built by other means (usually robot framework)
STATIC_DOCS := _static/voltha-system-tests _static/cord-tester
# name of python virtualenv that is used to run commands
VENV_NAME := venv_docs
.PHONY: help test lint reload Makefile prep
# Put it first so that "make" without argument is like "make help".
help :: $(VENV_NAME)
@ echo
@ source $</bin/activate ; set -u ;\
$(SPHINXBUILD) -M help "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O)
# -----------------------------------------------------------------------
# Create the virtualenv with all the tools installed
# -----------------------------------------------------------------------
$(VENV_NAME):
@echo
@echo "============================="
@echo "Installing python virtual env"
@echo "============================="
virtualenv -p python3 $@ ;\
source ./$@/bin/activate ;\
python -m pip install -r requirements.txt
ifndef NO_PATCH
@echo
@echo "========================================"
@echo "Applying python 3.10.x migration patches"
@echo "========================================"
./patches/python_310_migration.sh '--venv' "$@" 'apply'
endif
# automatically reload changes in browser as they're made
reload: $(VENV_NAME)
source $</bin/activate ; set -u ;\
sphinx-reload $(SOURCEDIR)
# lint and link verification. linkcheck is part of sphinx
test: lint linkcheck
# doctest
# coverage
# linkcheck
lint: doc8
doc8: $(VENV_NAME) | $(OTHER_REPO_DOCS)
source $</bin/activate ; set -u ;\
doc8 --max-line-length 119 \
$$(find . -name \*.rst ! -path "*venv*" ! -path "*vendor*" ! -path "*repos*" )
# markdown linting
# currently not enabled, should be added to lint target
LINT_STYLE ?= mdl_strict.rb
md-lint: | $(OTHER_REPO_DOCS)
@echo "markdownlint(mdl) version: `mdl --version`"
@echo "style config:"
@echo "---"
@cat $(LINT_STYLE)
@echo "---"
mdl -s $(LINT_STYLE) `find -L $(SOURCEDIR) ! -path "./_$(VENV_NAME)/*" ! -path "./_build/*" ! -path "./repos/*" ! -path "*vendor*" -name "*.md"`
# clean up
clean:
$(RM) -r $(BUILDDIR) $(OTHER_REPO_DOCS) $(STATIC_DOCS)
clean-all sterile: clean
$(RM) -r $(VENV_NAME) repos
# checkout the repos inside repos/ dir
repos:
mkdir repos
# build directory paths in repos/* to perform 'git clone <repo>' into
CHECKOUT_REPOS = $(foreach repo,$(OTHER_REPO_DOCS),repos/$(repo))
# Host holding the git server
REPO_HOST ?= https://gerrit.opencord.org
# For QA patchset validation - set SKIP_CHECKOUT to the repo name and
# pre-populate it under repos/ with the specific commit to being validated
SKIP_CHECKOUT ?=
# clone (only if doesn't exist)
$(CHECKOUT_REPOS): | repos
if [ ! -d '$@' ] ;\
then git clone $(REPO_HOST)/$(@F) $@ ;\
fi
# checkout correct ref if not under test, then copy subdirectories into main
# docs dir
$(OTHER_REPO_DOCS): | $(CHECKOUT_REPOS)
if [ "$(SKIP_CHECKOUT)" != "$@" ] ;\
then GIT_REF=`grep '^$@ ' git_refs | awk '{print $$3}'` ;\
cd "repos/$@" && git checkout $$GIT_REF ;\
fi
GIT_SUBDIR=`grep '^$@ ' git_refs | awk '{print $$2}'` ;\
cp -r repos/$(@)$$GIT_SUBDIR $@ ;\
# Build Robot documentation in voltha-system-tests and copy it into _static.
_static/voltha-system-tests: | $(OTHER_REPO_DOCS)
make -C voltha-system-tests gendocs
mkdir -p $@
cp -r voltha-system-tests/gendocs/* $@
# Build Robot documentation in cord-tester and copy it into _static.
_static/cord-tester: | $(OTHER_REPO_DOCS)
make -C cord-tester gendocs
mkdir -p $@
cp -r cord-tester/gendocs/* $@
# generate a list of git checksums suitable for updating git_refs
freeze: repos
@for repo in $(OTHER_REPO_DOCS) ; do \
GIT_SUBDIR=`grep "^$$repo " git_refs | awk '{print $$2}'` ;\
cd "repos/$$repo" > /dev/null ;\
HEAD_SHA=`git rev-parse HEAD` ;\
printf "%-24s %-8s %-40s\n" $$repo $$GIT_SUBDIR $$HEAD_SHA ;\
cd ../.. ;\
done
# build multiple versions
multiversion: $(VENV_NAME) Makefile | prep $(OTHER_REPO_DOCS)
source $</bin/activate ; set -u ;\
sphinx-multiversion "$(SOURCEDIR)" "$(BUILDDIR)/multiversion" $(SPHINXOPTS)
cp "$(SOURCEDIR)/_templates/meta_refresh.html" "$(BUILDDIR)/multiversion/index.html"
# prep target - used in sphinx-multiversion to properly link
prep: | $(OTHER_REPO_DOCS) $(STATIC_DOCS)
# Catch-all target: route all unknown targets to Sphinx using the new
# "make mode" option. $(O) is meant as a shortcut for $(SPHINXOPTS).
# %: $(VENV_NAME) Makefile | $(OTHER_REPO_DOCS) $(STATIC_DOCS)
include $(MAKEDIR)/voltha/docs-catchall-targets.mk
$(voltha-docs-catchall): $(VENV_NAME) Makefile | $(OTHER_REPO_DOCS) $(STATIC_DOCS)
@echo " ** CATCHALL: $@"
source $</bin/activate ; set -u ;\
$(SPHINXBUILD) -M $@ "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O)
include $(MAKEDIR)/help/trailer.mk
# [EOF]