| /* |
| * Copyright 2020-present Open Networking Foundation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| //Package adaptercoreonu provides the utility for onu devices, flows and statistics |
| package adaptercoreonu |
| |
| import ( |
| "context" |
| "errors" |
| "time" |
| |
| "github.com/looplab/fsm" |
| |
| "github.com/opencord/omci-lib-go" |
| me "github.com/opencord/omci-lib-go/generated" |
| "github.com/opencord/voltha-lib-go/v3/pkg/log" |
| ) |
| |
| func (onuDeviceEntry *OnuDeviceEntry) enterDLStartingState(e *fsm.Event) { |
| logger.Debugw("MibDownload FSM", log.Fields{"Start downloading OMCI MIB in state": e.FSM.Current(), "device-id": onuDeviceEntry.deviceID}) |
| if onuDeviceEntry.omciMessageReceived == nil { |
| onuDeviceEntry.omciMessageReceived = make(chan bool) |
| logger.Debug("MibDownload FSM - defining the BridgeInit RxChannel") |
| } |
| go onuDeviceEntry.processMibDownloadMessages() |
| } |
| |
| func (onuDeviceEntry *OnuDeviceEntry) enterCreatingGalState(e *fsm.Event) { |
| logger.Debugw("MibDownload FSM", log.Fields{"Tx create::GAL Ethernet Profile in state": e.FSM.Current(), "device-id": onuDeviceEntry.deviceID}) |
| meInstance := onuDeviceEntry.PDevOmciCC.sendCreateGalEthernetProfile(context.TODO(), ConstDefaultOmciTimeout, true) |
| onuDeviceEntry.PDevOmciCC.pLastTxMeInstance = meInstance |
| } |
| |
| func (onuDeviceEntry *OnuDeviceEntry) enterSettingOnu2gState(e *fsm.Event) { |
| logger.Debugw("MibDownload FSM", log.Fields{"Tx Set::ONU2-G in state": e.FSM.Current(), "device-id": onuDeviceEntry.deviceID}) |
| meInstance := onuDeviceEntry.PDevOmciCC.sendSetOnu2g(context.TODO(), ConstDefaultOmciTimeout, true) |
| onuDeviceEntry.PDevOmciCC.pLastTxMeInstance = meInstance |
| } |
| |
| func (onuDeviceEntry *OnuDeviceEntry) enterBridgeInitState(e *fsm.Event) { |
| logger.Infow("MibDownload FSM - starting bridge config port loop", log.Fields{ |
| "in state": e.FSM.Current(), "device-id": onuDeviceEntry.deviceID}) |
| go onuDeviceEntry.performInitialBridgeSetup() |
| } |
| |
| func (onuDeviceEntry *OnuDeviceEntry) enterDownloadedState(e *fsm.Event) { |
| logger.Debugw("MibDownload FSM", log.Fields{"send notification to core in State": e.FSM.Current(), "device-id": onuDeviceEntry.deviceID}) |
| onuDeviceEntry.transferSystemEvent(MibDownloadDone) |
| pMibDlFsm := onuDeviceEntry.pMibDownloadFsm |
| if pMibDlFsm != nil { |
| // obviously calling some FSM event here directly does not work - so trying to decouple it ... |
| go func(a_pAFsm *AdapterFsm) { |
| if a_pAFsm != nil && a_pAFsm.pFsm != nil { |
| _ = a_pAFsm.pFsm.Event(dlEvReset) |
| } |
| }(pMibDlFsm) |
| } |
| } |
| |
| func (onuDeviceEntry *OnuDeviceEntry) enterResettingState(e *fsm.Event) { |
| logger.Debugw("MibDownload FSM resetting", log.Fields{"device-id": onuDeviceEntry.deviceID}) |
| pMibDlFsm := onuDeviceEntry.pMibDownloadFsm |
| if pMibDlFsm != nil { |
| // abort running message processing |
| fsmAbortMsg := Message{ |
| Type: TestMsg, |
| Data: TestMessage{ |
| TestMessageVal: AbortMessageProcessing, |
| }, |
| } |
| pMibDlFsm.commChan <- fsmAbortMsg |
| |
| //try to restart the FSM to 'disabled' |
| // see DownloadedState: decouple event transfer |
| go func(a_pAFsm *AdapterFsm) { |
| if a_pAFsm != nil && a_pAFsm.pFsm != nil { |
| _ = a_pAFsm.pFsm.Event(dlEvRestart) |
| } |
| }(pMibDlFsm) |
| } |
| } |
| |
| func (onuDeviceEntry *OnuDeviceEntry) processMibDownloadMessages( /*ctx context.Context*/ ) { |
| logger.Debugw("Start MibDownload Msg processing", log.Fields{"for device-id": onuDeviceEntry.deviceID}) |
| loop: |
| for { |
| // case <-ctx.Done(): |
| // logger.Info("MibSync Msg", log.Fields{"Message handling canceled via context for device-id": onuDeviceEntry.deviceID}) |
| // break loop |
| // unless multiple channels are not involved, we should not use select |
| message, ok := <-onuDeviceEntry.pMibDownloadFsm.commChan |
| if !ok { |
| logger.Info("MibDownload Rx Msg", log.Fields{"Message couldn't be read from channel for device-id": onuDeviceEntry.deviceID}) |
| // but then we have to ensure a restart of the FSM as well - as exceptional procedure |
| _ = onuDeviceEntry.pMibDownloadFsm.pFsm.Event(dlEvRestart) |
| break loop |
| } |
| logger.Debugw("MibDownload Rx Msg", log.Fields{"Received message for device-id": onuDeviceEntry.deviceID}) |
| |
| switch message.Type { |
| case TestMsg: |
| msg, _ := message.Data.(TestMessage) |
| if msg.TestMessageVal == AbortMessageProcessing { |
| logger.Infow("MibDownload abort ProcessMsg", log.Fields{"for device-id": onuDeviceEntry.deviceID}) |
| break loop |
| } |
| logger.Warnw("MibDownload unknown TestMessage", log.Fields{"device-id": onuDeviceEntry.deviceID, "MessageVal": msg.TestMessageVal}) |
| case OMCI: |
| msg, _ := message.Data.(OmciMessage) |
| onuDeviceEntry.handleOmciMibDownloadMessage(msg) |
| default: |
| logger.Warn("MibDownload Rx Msg", log.Fields{"Unknown message type received for device-id": onuDeviceEntry.deviceID, |
| "message.Type": message.Type}) |
| } |
| |
| } |
| logger.Infow("End MibDownload Msg processing", log.Fields{"for device-id": onuDeviceEntry.deviceID}) |
| } |
| |
| func (onuDeviceEntry *OnuDeviceEntry) handleOmciMibDownloadMessage(msg OmciMessage) { |
| logger.Debugw("Rx OMCI MibDownload Msg", log.Fields{"device-id": onuDeviceEntry.deviceID, |
| "msgType": msg.OmciMsg.MessageType}) |
| |
| switch msg.OmciMsg.MessageType { |
| case omci.CreateResponseType: |
| { |
| msgLayer := (*msg.OmciPacket).Layer(omci.LayerTypeCreateResponse) |
| if msgLayer == nil { |
| logger.Error("Omci Msg layer could not be detected for CreateResponse") |
| return |
| } |
| msgObj, msgOk := msgLayer.(*omci.CreateResponse) |
| if !msgOk { |
| logger.Error("Omci Msg layer could not be assigned for CreateResponse") |
| return |
| } |
| logger.Debugw("CreateResponse Data", log.Fields{"device-id": onuDeviceEntry.deviceID, "data-fields": msgObj}) |
| if msgObj.Result != me.Success { |
| logger.Errorw("Omci CreateResponse Error - later: drive FSM to abort state ?", log.Fields{"Error": msgObj.Result}) |
| // possibly force FSM into abort or ignore some errors for some messages? store error for mgmt display? |
| return |
| } |
| // maybe there is a way of pushing the specific create response type generally to the FSM |
| // and let the FSM verify, if the response was according to current state |
| // and possibly store the element to DB and progress - maybe some future option ... |
| // but as that is not straightforward to me I insert the type checkes manually here |
| // and feed the FSM with only 'pre-defined' events ... |
| if msgObj.EntityClass == onuDeviceEntry.PDevOmciCC.pLastTxMeInstance.GetClassID() && |
| msgObj.EntityInstance == onuDeviceEntry.PDevOmciCC.pLastTxMeInstance.GetEntityID() { |
| //store the created ME into DB //TODO??? obviously the Python code does not store the config ... |
| // if, then something like: |
| //onuDeviceEntry.pOnuDB.StoreMe(msgObj) |
| |
| // maybe we can use just the same eventName for different state transitions like "forward" |
| // - might be checked, but so far I go for sure and have to inspect the concrete state events ... |
| switch onuDeviceEntry.PDevOmciCC.pLastTxMeInstance.GetName() { |
| case "GalEthernetProfile": |
| { // let the FSM proceed ... |
| _ = onuDeviceEntry.pMibDownloadFsm.pFsm.Event(dlEvRxGalResp) |
| } |
| case "MacBridgeServiceProfile", |
| "MacBridgePortConfigurationData", |
| "ExtendedVlanTaggingOperationConfigurationData": |
| { // let bridge init proceed by stopping the wait function |
| onuDeviceEntry.omciMessageReceived <- true |
| } |
| } |
| } |
| } //CreateResponseType |
| |
| case omci.SetResponseType: |
| { |
| msgLayer := (*msg.OmciPacket).Layer(omci.LayerTypeSetResponse) |
| if msgLayer == nil { |
| logger.Error("Omci Msg layer could not be detected for SetResponse") |
| return |
| } |
| msgObj, msgOk := msgLayer.(*omci.SetResponse) |
| if !msgOk { |
| logger.Error("Omci Msg layer could not be assigned for SetResponse") |
| return |
| } |
| logger.Debugw("SetResponse Data", log.Fields{"device-id": onuDeviceEntry.deviceID, "data-fields": msgObj}) |
| if msgObj.Result != me.Success { |
| logger.Errorw("Omci SetResponse Error - later: drive FSM to abort state ?", log.Fields{"Error": msgObj.Result}) |
| // possibly force FSM into abort or ignore some errors for some messages? store error for mgmt display? |
| return |
| } |
| // compare comments above for CreateResponse (apply also here ...) |
| if msgObj.EntityClass == onuDeviceEntry.PDevOmciCC.pLastTxMeInstance.GetClassID() && |
| msgObj.EntityInstance == onuDeviceEntry.PDevOmciCC.pLastTxMeInstance.GetEntityID() { |
| //store the created ME into DB //TODO??? obviously the Python code does not store the config ... |
| // if, then something like: |
| //onuDeviceEntry.pOnuDB.StoreMe(msgObj) |
| |
| switch onuDeviceEntry.PDevOmciCC.pLastTxMeInstance.GetName() { |
| case "Onu2G": |
| { // let the FSM proceed ... |
| _ = onuDeviceEntry.pMibDownloadFsm.pFsm.Event(dlEvRxOnu2gResp) |
| } |
| //so far that was the only MibDownlad Set Element ... |
| } |
| } |
| } //SetResponseType |
| default: |
| { |
| logger.Errorw("Rx OMCI MibDownload unhandled MsgType", log.Fields{"omciMsgType": msg.OmciMsg.MessageType}) |
| return |
| } |
| } // switch msg.OmciMsg.MessageType |
| } |
| |
| func (onuDeviceEntry *OnuDeviceEntry) performInitialBridgeSetup() { |
| for uniNo, uniPort := range onuDeviceEntry.baseDeviceHandler.uniEntityMap { |
| logger.Debugw("Starting IntialBridgeSetup", log.Fields{ |
| "device-id": onuDeviceEntry.deviceID, "for PortNo": uniNo}) |
| |
| //create MBSP |
| meInstance := onuDeviceEntry.PDevOmciCC.sendCreateMBServiceProfile( |
| context.TODO(), uniPort, ConstDefaultOmciTimeout, true) |
| onuDeviceEntry.PDevOmciCC.pLastTxMeInstance = meInstance |
| //verify response |
| err := onuDeviceEntry.waitforOmciResponse(meInstance) |
| if err != nil { |
| logger.Error("InitialBridgeSetup failed at MBSP, aborting MIB Download!") |
| _ = onuDeviceEntry.pMibDownloadFsm.pFsm.Event(dlEvReset) |
| return |
| } |
| |
| //create MBPCD |
| meInstance = onuDeviceEntry.PDevOmciCC.sendCreateMBPConfigData( |
| context.TODO(), uniPort, ConstDefaultOmciTimeout, true) |
| onuDeviceEntry.PDevOmciCC.pLastTxMeInstance = meInstance |
| //verify response |
| err = onuDeviceEntry.waitforOmciResponse(meInstance) |
| if err != nil { |
| logger.Error("InitialBridgeSetup failed at MBPCD, aborting MIB Download!") |
| _ = onuDeviceEntry.pMibDownloadFsm.pFsm.Event(dlEvReset) |
| return |
| } |
| |
| //create EVTOCD |
| meInstance = onuDeviceEntry.PDevOmciCC.sendCreateEVTOConfigData( |
| context.TODO(), uniPort, ConstDefaultOmciTimeout, true) |
| onuDeviceEntry.PDevOmciCC.pLastTxMeInstance = meInstance |
| //verify response |
| err = onuDeviceEntry.waitforOmciResponse(meInstance) |
| if err != nil { |
| logger.Error("InitialBridgeSetup failed at EVTOCD, aborting MIB Download!") |
| _ = onuDeviceEntry.pMibDownloadFsm.pFsm.Event(dlEvReset) |
| return |
| } |
| } |
| logger.Infow("IntialBridgeSetup finished", log.Fields{"device-id": onuDeviceEntry.deviceID}) |
| _ = onuDeviceEntry.pMibDownloadFsm.pFsm.Event(dlEvRxBridgeResp) |
| } |
| |
| func (onuDeviceEntry *OnuDeviceEntry) waitforOmciResponse(apMeInstance *me.ManagedEntity) error { |
| select { |
| case <-time.After(30 * time.Second): //3s was detected to be to less in 8*8 bbsim test with debug Info/Debug |
| logger.Warnw("MibDownload-bridge-init timeout", log.Fields{"for device-id": onuDeviceEntry.deviceID}) |
| return errors.New("mibDownloadBridgeInit timeout") |
| case success := <-onuDeviceEntry.omciMessageReceived: |
| if success { |
| logger.Debug("MibDownload-bridge-init response received") |
| return nil |
| } |
| // should not happen so far |
| logger.Warnw("MibDownload-bridge-init response error", log.Fields{"for device-id": onuDeviceEntry.deviceID}) |
| return errors.New("mibDownloadBridgeInit responseError") |
| } |
| } |