blob: 4127089bd2c111d4aa10ea384ed4898cc99ebd53 [file] [log] [blame]
/*
* Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
* Copyright 2020-present Open Networking Foundation
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
* http://www.apache.org/licenses/LICENSE-2.0
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/*
* NOTE: This file was generated, manual edits will be overwritten!
*
* Generated by 'goCodeGenerator.py':
* https://github.com/cboling/OMCI-parser/README.md
*/
package generated
import "github.com/deckarep/golang-set"
// Dot1XPerformanceMonitoringHistoryDataClassID is the 16-bit ID for the OMCI
// Managed entity Dot1X performance monitoring history data
const Dot1XPerformanceMonitoringHistoryDataClassID ClassID = ClassID(292)
var dot1xperformancemonitoringhistorydataBME *ManagedEntityDefinition
// Dot1XPerformanceMonitoringHistoryData (class ID #292)
// This ME collects performance statistics on an ONU's IEEE 802.1X CPE authentication operation.
// Instances of this ME are created and deleted by the OLT.
//
// For a complete discussion of generic PM architecture, refer to clause I.4.
//
// Relationships
// An instance of this ME may be associated with each UNI that can perform IEEE-802.1X
// authentication of CPE.
//
// Attributes
// Managed Entity Id
// Managed entity ID: This attribute uniquely identifies each instance of this ME. Through an
// identical ID, this ME is implicitly linked to an instance of a PPTP. (R, setbycreate)
// (mandatory) (2-bytes)
//
// Interval End Time
// Interval end time: This attribute identifies the most recently finished 15-min interval. (R)
// (mandatory) (1-byte)
//
// Threshold Data 1_2 Id
// Threshold data 1/2 ID: This attribute points to an instance of the threshold data 1 and 2 MEs
// that contains PM threshold values. (R,-W, setbycreate) (mandatory) (2-bytes)
//
// Eapol Frames Received
// EAPOL frames received: This attribute counts received valid EAPOL frames of any type. (R)
// (mandatory) (4-bytes)
//
// Eapol Frames Transmitted
// EAPOL frames transmitted: This attribute counts transmitted EAPOL frames of any type. (R)
// (mandatory) (4-bytes)
//
// Eapol Start Frames Received
// EAPOL start frames received: This attribute counts received EAPOL start frames. (R) (mandatory)
// (4-bytes)
//
// Eapol Logoff Frames Received
// EAPOL logoff frames received: This attribute counts received EAPOL logoff frames. (R)
// (mandatory) (4-bytes)
//
// Invalid Eapol Frames Received
// Invalid EAPOL frames received: This attribute counts received EAPOL frames in which the frame
// type was not recognized. (R) (mandatory) (4-bytes)
//
// Eap Resp_Id Frames Received
// EAP resp/id frames received: This attribute counts received EAP response frames containing an
// identifier type field. (R) (mandatory) (4-bytes)
//
// Eap Response Frames Received
// EAP response frames received: This attribute counts received EAP response frames, other than
// resp/id frames. (R) (mandatory) (4-bytes)
//
// Eap Initial Request Frames Transmitted
// EAP initial request frames transmitted: This attribute counts transmitted request frames
// containing an identifier type field. In [IEEE 802.1X], this is also called ReqId. (R)
// (mandatory) (4-bytes)
//
// Eap Request Frames Transmitted
// EAP request frames transmitted: This attribute counts transmitted request frames, other than
// request/id frames. (R) (mandatory) (4-bytes)
//
// Eap Length Error Frames Received
// EAP length error frames received: This attribute counts received EAPOL frames whose packet body
// length field was invalid. (R) (mandatory) (4-bytes)
//
// Eap Success Frames Generated Autonomously
// EAP success frames generated autonomously: This attribute counts EAPOL success frames generated
// according to the local fallback policy because no radius server was available. (R) (mandatory)
// (4-bytes)
//
// Eap Failure Frames Generated Autonomously
// EAP failure frames generated autonomously: This attribute counts EAPOL failure frames generated
// according to the local fallback policy because no radius server was available. (R) (mandatory)
// (4-bytes)
//
type Dot1XPerformanceMonitoringHistoryData struct {
ManagedEntityDefinition
Attributes AttributeValueMap
}
func init() {
dot1xperformancemonitoringhistorydataBME = &ManagedEntityDefinition{
Name: "Dot1XPerformanceMonitoringHistoryData",
ClassID: 292,
MessageTypes: mapset.NewSetWith(
Create,
Delete,
Get,
Set,
),
AllowedAttributeMask: 0xfffc,
AttributeDefinitions: AttributeDefinitionMap{
0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0),
1: ByteField("IntervalEndTime", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read), false, false, false, 1),
2: Uint16Field("ThresholdData12Id", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 2),
3: Uint32Field("EapolFramesReceived", CounterAttributeType, 0x2000, 0, mapset.NewSetWith(Read), false, false, false, 3),
4: Uint32Field("EapolFramesTransmitted", CounterAttributeType, 0x1000, 0, mapset.NewSetWith(Read), false, false, false, 4),
5: Uint32Field("EapolStartFramesReceived", CounterAttributeType, 0x0800, 0, mapset.NewSetWith(Read), false, false, false, 5),
6: Uint32Field("EapolLogoffFramesReceived", CounterAttributeType, 0x0400, 0, mapset.NewSetWith(Read), false, false, false, 6),
7: Uint32Field("InvalidEapolFramesReceived", CounterAttributeType, 0x0200, 0, mapset.NewSetWith(Read), false, false, false, 7),
8: Uint32Field("EapRespIdFramesReceived", CounterAttributeType, 0x0100, 0, mapset.NewSetWith(Read), false, false, false, 8),
9: Uint32Field("EapResponseFramesReceived", CounterAttributeType, 0x0080, 0, mapset.NewSetWith(Read), false, false, false, 9),
10: Uint32Field("EapInitialRequestFramesTransmitted", CounterAttributeType, 0x0040, 0, mapset.NewSetWith(Read), false, false, false, 10),
11: Uint32Field("EapRequestFramesTransmitted", CounterAttributeType, 0x0020, 0, mapset.NewSetWith(Read), false, false, false, 11),
12: Uint32Field("EapLengthErrorFramesReceived", CounterAttributeType, 0x0010, 0, mapset.NewSetWith(Read), false, false, false, 12),
13: Uint32Field("EapSuccessFramesGeneratedAutonomously", CounterAttributeType, 0x0008, 0, mapset.NewSetWith(Read), false, false, false, 13),
14: Uint32Field("EapFailureFramesGeneratedAutonomously", CounterAttributeType, 0x0004, 0, mapset.NewSetWith(Read), false, false, false, 14),
},
Access: CreatedByOlt,
Support: UnknownSupport,
}
}
// NewDot1XPerformanceMonitoringHistoryData (class ID 292) creates the basic
// Managed Entity definition that is used to validate an ME of this type that
// is received from or transmitted to the OMCC.
func NewDot1XPerformanceMonitoringHistoryData(params ...ParamData) (*ManagedEntity, OmciErrors) {
return NewManagedEntity(*dot1xperformancemonitoringhistorydataBME, params...)
}