blob: 10da39b62c94fadea404c5745e2742f0b8a5f9b6 [file] [log] [blame]
/*
* Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
* Copyright 2020-present Open Networking Foundation
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
* http://www.apache.org/licenses/LICENSE-2.0
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/*
* NOTE: This file was generated, manual edits will be overwritten!
*
* Generated by 'goCodeGenerator.py':
* https://github.com/cboling/OMCI-parser/README.md
*/
package generated
import "github.com/deckarep/golang-set"
// EthernetPerformanceMonitoringHistoryData3ClassID is the 16-bit ID for the OMCI
// Managed entity Ethernet performance monitoring history data 3
const EthernetPerformanceMonitoringHistoryData3ClassID ClassID = ClassID(296)
var ethernetperformancemonitoringhistorydata3BME *ManagedEntityDefinition
// EthernetPerformanceMonitoringHistoryData3 (class ID #296)
// This ME collects PM data associated with an Ethernet interface. It includes parameters defined
// in the Ethernet statistics group of [IETF RFC 2819] that are not already covered by previously
// defined Ethernet monitoring MEs. The received direction is from the CPE towards the network
// (upstream).
//
// NOTE 1 - Several of the same counters are available from the Ethernet frame PM history data MEs,
// which are associated with MAC bridge ports. MAC bridge port association allows those MEs to be
// used for any Ethernet flow, in both upstream and downstream directions, while the Ethernet PM
// history data 3 ME can only be used on a physical IEEE 802.3 port.
//
// Instances of this ME are created and deleted by the OLT.
//
// For a complete discussion of generic PM architecture, refer to clause I.4.
//
// NOTE 2 - Implementers are encouraged to consider the Ethernet frame extended PM ME defined in
// clause-9.3.32, which collects the same counters in a more generalized way.
//
// Relationships
// An instance of this ME is associated with an instance of the PPTP Ethernet UNI.
//
// Attributes
// Managed Entity Id
// Managed entity ID: This attribute uniquely identifies each instance of this ME. Through an
// identical ID, this ME is implicitly linked to an instance of the PPTP Ethernet UNI. (R,
// setbycreate) (mandatory) (2-bytes)
//
// Interval End Time
// Interval end time: This attribute identifies the most recently finished 15-min interval. (R)
// (mandatory) (1-byte)
//
// Threshold Data 1_2 Id
// Threshold data 1/2 ID: This attribute points to an instance of the threshold data 1 ME that
// contains PM threshold values. Since no threshold value attribute number exceeds 7, a threshold
// data 2 ME is optional. (R,-W, setbycreate) (mandatory) (2-bytes)
//
// Drop Events
// Drop events: The total number of events in which packets were dropped due to a lack of
// resources. This is not necessarily the number of packets dropped; it is the number of times this
// event was detected. (R) (mandatory) (4-bytes)
//
// Octets
// Octets: The total number of octets received from the CPE, including those in bad packets,
// excluding framing bytes, but including FCS. (R) (mandatory) (4-bytes)
//
// Packets
// Packets: The total number of packets received, including bad packets, broadcast packets and
// multicast packets. (R) (mandatory) (4-bytes)
//
// Broadcast Packets
// Broadcast packets: The total number of received good packets directed to the broadcast address.
// This does not include multicast packets. (R) (mandatory) (4-bytes)
//
// Multicast Packets
// Multicast packets: The total number of received good packets directed to a multicast address.
// This does not include broadcast packets. (R) (mandatory) (4-bytes)
//
// Undersize Packets
// Undersize packets: The total number of packets received that were less than 64 octets long, but
// were otherwise well formed (excluding framing bits, but including FCS). (R) (mandatory)
// (4-bytes)
//
// Fragments
// Fragments: The total number of packets received that were less than 64 octets long, excluding
// framing bits but including FCS octets, and had either a bad FCS with an integral number of
// octets (FCS error) or a bad FCS with a non-integral number of octets (alignment error). It is
// entirely normal for this attribute to increment. This is because it counts both runts (which are
// normal occurrences due to collisions) and noise hits. (R) (mandatory) (4-bytes)
//
// Jabbers
// Jabbers: The total number of packets received that were longer than 1518 octets, excluding
// framing bits but including FCS octets, and had either a bad FCS with an integral number of
// octets (FCS error) or a bad FCS with a non-integral number of octets (alignment error). The
// range to detect jabber is between 20 ms and 150 ms. (R) (mandatory) (4-bytes)
//
// Packets 64 Octets
// Packets 64 octets: The total number of received packets (including bad packets) that were
// 64-octets long, excluding framing bits but including FCS. (R) (mandatory) (4-bytes)
//
// Packets 65 To 127 Octets
// Packets 65 to 127 octets: The total number of received packets (including bad packets) that were
// 65..127 octets long, excluding framing bits but including FCS. (R) (mandatory) (4-bytes)
//
// Packets 128 To 255 Octets
// Packets 128 to 255 octets: The total number of packets (including bad packets) received that
// were 128..255 octets long, excluding framing bits but including FCS. (R) (mandatory) (4-bytes)
//
// Packets 256 To 511 Octets
// Packets 256 to 511 octets: The total number of packets (including bad packets) received that
// were 256..511 octets long, excluding framing bits but including FCS. (R) (mandatory) (4-bytes)
//
// Packets 512 To 1023 Octets
// Packets 512 to 1023 octets: The total number of packets (including bad packets) received that
// were 512..1023 octets long, excluding framing bits but including FCS. (R) (mandatory) (4-bytes)
//
// Packets 1024 To 1518 Octets
// Packets 1024 to 1518 octets: The total number of packets (including bad packets) received that
// were 1024..1518 octets long, excluding framing bits but including FCS. (R) (mandatory) (4-bytes)
//
type EthernetPerformanceMonitoringHistoryData3 struct {
ManagedEntityDefinition
Attributes AttributeValueMap
}
func init() {
ethernetperformancemonitoringhistorydata3BME = &ManagedEntityDefinition{
Name: "EthernetPerformanceMonitoringHistoryData3",
ClassID: 296,
MessageTypes: mapset.NewSetWith(
Create,
Delete,
Get,
Set,
),
AllowedAttributeMask: 0xffff,
AttributeDefinitions: AttributeDefinitionMap{
0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0),
1: ByteField("IntervalEndTime", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read), false, false, false, 1),
2: Uint16Field("ThresholdData12Id", PointerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 2),
3: Uint32Field("DropEvents", CounterAttributeType, 0x2000, 0, mapset.NewSetWith(Read), false, false, false, 3),
4: Uint32Field("Octets", CounterAttributeType, 0x1000, 0, mapset.NewSetWith(Read), false, false, false, 4),
5: Uint32Field("Packets", CounterAttributeType, 0x0800, 0, mapset.NewSetWith(Read), false, false, false, 5),
6: Uint32Field("BroadcastPackets", CounterAttributeType, 0x0400, 0, mapset.NewSetWith(Read), false, false, false, 6),
7: Uint32Field("MulticastPackets", CounterAttributeType, 0x0200, 0, mapset.NewSetWith(Read), false, false, false, 7),
8: Uint32Field("UndersizePackets", CounterAttributeType, 0x0100, 0, mapset.NewSetWith(Read), false, false, false, 8),
9: Uint32Field("Fragments", CounterAttributeType, 0x0080, 0, mapset.NewSetWith(Read), false, false, false, 9),
10: Uint32Field("Jabbers", CounterAttributeType, 0x0040, 0, mapset.NewSetWith(Read), false, false, false, 10),
11: Uint32Field("Packets64Octets", CounterAttributeType, 0x0020, 0, mapset.NewSetWith(Read), false, false, false, 11),
12: Uint32Field("Packets65To127Octets", CounterAttributeType, 0x0010, 0, mapset.NewSetWith(Read), false, false, false, 12),
13: Uint32Field("Packets128To255Octets", CounterAttributeType, 0x0008, 0, mapset.NewSetWith(Read), false, false, false, 13),
14: Uint32Field("Packets256To511Octets", CounterAttributeType, 0x0004, 0, mapset.NewSetWith(Read), false, false, false, 14),
15: Uint32Field("Packets512To1023Octets", CounterAttributeType, 0x0002, 0, mapset.NewSetWith(Read), false, false, false, 15),
16: Uint32Field("Packets1024To1518Octets", CounterAttributeType, 0x0001, 0, mapset.NewSetWith(Read), false, false, false, 16),
},
Access: CreatedByOlt,
Support: UnknownSupport,
}
}
// NewEthernetPerformanceMonitoringHistoryData3 (class ID 296) creates the basic
// Managed Entity definition that is used to validate an ME of this type that
// is received from or transmitted to the OMCC.
func NewEthernetPerformanceMonitoringHistoryData3(params ...ParamData) (*ManagedEntity, OmciErrors) {
return NewManagedEntity(*ethernetperformancemonitoringhistorydata3BME, params...)
}