blob: ae562a02a17ad93f95ac557f5c939f5f1ce03653 [file] [log] [blame]
/*
* Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
* Copyright 2020-present Open Networking Foundation
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
* http://www.apache.org/licenses/LICENSE-2.0
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/*
* NOTE: This file was generated, manual edits will be overwritten!
*
* Generated by 'goCodeGenerator.py':
* https://github.com/cboling/OMCI-parser/README.md
*/
package generated
import "github.com/deckarep/golang-set"
// PhysicalPathTerminationPointEthernetUniClassID is the 16-bit ID for the OMCI
// Managed entity Physical path termination point Ethernet UNI
const PhysicalPathTerminationPointEthernetUniClassID ClassID = ClassID(11)
var physicalpathterminationpointethernetuniBME *ManagedEntityDefinition
// PhysicalPathTerminationPointEthernetUni (class ID #11)
// This ME represents the point at an Ethernet UNI where the physical path terminates and Ethernet
// physical level functions are performed.
//
// The ONU automatically creates an instance of this ME per port:
//
// o when the ONU has Ethernet ports built into its factory configuration;
//
// o when a cardholder is provisioned to expect a circuit pack of the Ethernet type;
//
// o when a cardholder provisioned for plug-and-play is equipped with a circuit pack of the
// Ethernet type. Note that the installation of a plug-and-play card may indicate the presence of
// Ethernet ports via equipment ID as well as its type, and indeed may cause the ONU to instantiate
// a port-mapping package that specifies Ethernet ports.
//
// The ONU automatically deletes instances of this ME when a cardholder is neither provisioned to
// expect an Ethernet circuit pack, nor is it equipped with an Ethernet circuit pack.
//
// Relationships
// An instance of this ME is associated with each instance of a pre-provisioned or real Ethernet
// port.
//
// Attributes
// Managed Entity Id
// Managed entity ID: This attribute uniquely identifies each instance of this ME. This 2 byte
// number indicates the physical position of the UNI. The first byte is the slot ID (defined in
// clause 9.1.5). The second byte is the port ID, with the range 1..255. (R) (mandatory) (2-bytes)
//
// Expected Type
// Upon ME instantiation, the ONU sets this attribute to 0. (R,-W) (mandatory) (1-byte)
//
// Sensed Type
// (R) (mandatory if the ONU supports circuit packs with configurable interface types, e.g., 10/100
// BASE-T card) (1-byte)
//
// Auto Detection Configuration
// Upon ME instantiation, the ONU sets this attribute to 0. (R,-W) (mandatory for interfaces with
// autodetection options) (1-byte)
//
// Ethernet Loopback Configuration
// Upon ME instantiation, the ONU sets this attribute to 0. (R,-W) (mandatory) (1-byte)
//
// Administrative State
// Administrative state: This attribute locks (1) and unlocks (0) the functions performed by this
// ME. Administrative state is further described in clause A.1.6. (R,-W) (mandatory) (1-byte)
//
// Operational State
// Operational state: This attribute indicates whether the ME is capable of performing its
// function. Valid values are enabled (0) and disabled (1). (R) (optional) (1-byte)
//
// Configuration Ind
// The value 0 indicates that the configuration status is unknown (e.g., Ethernet link is not
// established or the circuit pack is not yet installed). Upon ME instantiation, the ONU sets this
// attribute to 0. (R) (mandatory) (1-byte)
//
// Max Frame Size
// Max frame size: This attribute denotes the maximum frame size allowed across this interface.
// Upon ME instantiation, the ONU sets the attribute to 1518. (R,-W) (mandatory for G-PON, optional
// for ITU-T G.986 systems) (2 bytes)
//
// Dte Or Dce Ind
// (R,-W) (mandatory) (1-byte)
//
// Pause Time
// Pause time: This attribute allows the PPTP to ask the subscriber terminal to temporarily suspend
// sending data. Units are in pause quanta (1 pause quantum is 512 bit times of the particular
// implementation). Values: 0..0xFFFF. Upon ME instantiation, the ONU sets this attribute to 0.
// (R,-W) (optional) (2-bytes)
//
// Bridged Or Ip Ind
// Upon ME instantiation, the ONU sets this attribute to 2. (R,-W) (optional) (1-byte)
//
// Arc
// ARC: See clause A.1.4.3. (R,-W) (optional) (1-byte)
//
// Arc Interval
// ARC interval: See clause A.1.4.3. (R,-W) (optional) (1-byte)
//
// Pppoe Filter
// PPPoE filter: This attribute controls filtering of PPPoE packets on this Ethernet port. The
// value 0 allows packets of all types. The value 1 discards everything but PPPoE packets. The
// default value is 0. (R,-W) (optional) (1-byte)
//
// Power Control
// NOTE - This attribute is the equivalent of the acPSEAdminControl variable defined in clause
// 30.9.1.2.1 of [IEEE 802.3]. Other variables related to PoE appear in the PoE control ME.
//
type PhysicalPathTerminationPointEthernetUni struct {
ManagedEntityDefinition
Attributes AttributeValueMap
}
func init() {
physicalpathterminationpointethernetuniBME = &ManagedEntityDefinition{
Name: "PhysicalPathTerminationPointEthernetUni",
ClassID: 11,
MessageTypes: mapset.NewSetWith(
Get,
Set,
),
AllowedAttributeMask: 0xfffe,
AttributeDefinitions: AttributeDefinitionMap{
0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read), false, false, false, 0),
1: ByteField("ExpectedType", EnumerationAttributeType, 0x8000, 0, mapset.NewSetWith(Read, Write), false, false, false, 1),
2: ByteField("SensedType", EnumerationAttributeType, 0x4000, 0, mapset.NewSetWith(Read), true, false, false, 2),
3: ByteField("AutoDetectionConfiguration", EnumerationAttributeType, 0x2000, 0, mapset.NewSetWith(Read, Write), false, false, false, 3),
4: ByteField("EthernetLoopbackConfiguration", EnumerationAttributeType, 0x1000, 0, mapset.NewSetWith(Read, Write), false, false, false, 4),
5: ByteField("AdministrativeState", EnumerationAttributeType, 0x0800, 0, mapset.NewSetWith(Read, Write), false, false, false, 5),
6: ByteField("OperationalState", EnumerationAttributeType, 0x0400, 0, mapset.NewSetWith(Read), true, true, false, 6),
7: ByteField("ConfigurationInd", EnumerationAttributeType, 0x0200, 0, mapset.NewSetWith(Read), false, false, false, 7),
8: Uint16Field("MaxFrameSize", UnsignedIntegerAttributeType, 0x0100, 1518, mapset.NewSetWith(Read, Write), false, false, false, 8),
9: ByteField("DteOrDceInd", EnumerationAttributeType, 0x0080, 0, mapset.NewSetWith(Read, Write), false, false, false, 9),
10: Uint16Field("PauseTime", UnsignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read, Write), false, true, false, 10),
11: ByteField("BridgedOrIpInd", EnumerationAttributeType, 0x0020, 0, mapset.NewSetWith(Read, Write), false, true, false, 11),
12: ByteField("Arc", EnumerationAttributeType, 0x0010, 0, mapset.NewSetWith(Read, Write), true, true, false, 12),
13: ByteField("ArcInterval", UnsignedIntegerAttributeType, 0x0008, 0, mapset.NewSetWith(Read, Write), false, true, false, 13),
14: ByteField("PppoeFilter", EnumerationAttributeType, 0x0004, 0, mapset.NewSetWith(Read, Write), false, true, false, 14),
15: ByteField("PowerControl", EnumerationAttributeType, 0x0002, 0, mapset.NewSetWith(Read, Write), false, true, false, 15),
},
Access: CreatedByOnu,
Support: UnknownSupport,
}
}
// NewPhysicalPathTerminationPointEthernetUni (class ID 11) creates the basic
// Managed Entity definition that is used to validate an ME of this type that
// is received from or transmitted to the OMCC.
func NewPhysicalPathTerminationPointEthernetUni(params ...ParamData) (*ManagedEntity, OmciErrors) {
return NewManagedEntity(*physicalpathterminationpointethernetuniBME, params...)
}