internal/pkg/controller/audittables.go - voltha-go-controller - Gitiles

 /*
 * Copyright 2022-present Open Networking Foundation
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

 package controller

 import (
 	"context"
 	"strconv"
 	"time"

 	"voltha-go-controller/internal/pkg/intf"
 	"voltha-go-controller/internal/pkg/of"
 	"voltha-go-controller/internal/pkg/tasks"
 	"voltha-go-controller/internal/pkg/util"
 	"voltha-go-controller/log"
 	"github.com/opencord/voltha-protos/v5/go/common"
 	ofp "github.com/opencord/voltha-protos/v5/go/openflow_13"
 	"github.com/opencord/voltha-protos/v5/go/voltha"
 )

 var (
 	rcvdGroups  map[uint32]*ofp.OfpGroupDesc
 	groupsToAdd []*of.Group
 	groupsToMod []*of.Group
 )

 // AuditTablesTask structure
 type AuditTablesTask struct {
 	taskID    uint8
 	ctx       context.Context
 	device    *Device
 	stop      bool
 	timestamp string
 }

 // NewAuditTablesTask is constructor for AuditTablesTask
 func NewAuditTablesTask(device *Device) *AuditTablesTask {
 	var att AuditTablesTask
 	att.device = device
 	att.stop = false
 	tstamp := (time.Now()).Format(time.RFC3339Nano)
 	att.timestamp = tstamp
 	return &att
 }

 // Name returns name of the task
 func (att *AuditTablesTask) Name() string {
 	return "Audit Table Task"
 }

 // TaskID to return task id of the task
 func (att *AuditTablesTask) TaskID() uint8 {
 	return att.taskID
 }

 // Timestamp to return timestamp for the task
 func (att *AuditTablesTask) Timestamp() string {
 	return att.timestamp
 }

 // Stop to stop the task
 func (att *AuditTablesTask) Stop() {
 	att.stop = true
 }

 // Start is called by the framework and is responsible for implementing
 // the actual task.
 func (att *AuditTablesTask) Start(ctx context.Context, taskID uint8) error {
 	logger.Warnw(ctx, "Audit Table Task Triggered", log.Fields{"Context": ctx, "taskId": taskID, "Device": att.device.ID})
 	att.taskID = taskID
 	att.ctx = ctx
 	var errInfo error
 	var err error

 	// Audit the meters
 	if err = att.AuditMeters(); err != nil {
 		logger.Errorw(ctx, "Audit Meters Failed", log.Fields{"Reason": err.Error()})
 		errInfo = err
 	}

 	// Audit the Groups
 	if rcvdGroups, err = att.AuditGroups(); err != nil {
 		logger.Errorw(ctx, "Audit Groups Failed", log.Fields{"Reason": err.Error()})
 		errInfo = err
 	}

 	// Audit the flows
 	if err = att.AuditFlows(ctx); err != nil {
 		logger.Errorw(ctx, "Audit Flows Failed", log.Fields{"Reason": err.Error()})
 		errInfo = err
 	}

 	// Triggering deletion of excess groups from device after the corresponding flows are removed
 	// to avoid flow dependency error during group deletion
 	logger.Infow(ctx, "Excess Groups", log.Fields{"Groups": rcvdGroups})
 	att.DelExcessGroups(rcvdGroups)
 	logger.Warnw(ctx, "Audit Table Task Completed", log.Fields{"Context": ctx, "taskId": taskID, "Device": att.device.ID})
 	return errInfo

 }

 // AuditMeters : Audit the meters which includes fetching the existing meters at the
 // voltha and identifying the delta between the ones held here and the
 // ones held at VOLTHA. The delta must be cleaned up to keep both the
 // components in sync
 func (att *AuditTablesTask) AuditMeters() error {

 	if att.stop {
 		return tasks.ErrTaskCancelError
 	}
 	var vc voltha.VolthaServiceClient
 	if vc = att.device.VolthaClient(); vc == nil {
 		logger.Error(ctx, "Fetch Device Meters Failed: Voltha Client Unavailable")
 		return nil
 	}

 	//-----------------------------
 	// Perform the audit of meters
 	// Fetch the meters
 	ms, err := vc.ListLogicalDeviceMeters(att.ctx, &voltha.ID{Id: att.device.ID})
 	if err != nil {
 		logger.Warnw(ctx, "Audit of flows failed", log.Fields{"Reason": err.Error()})
 		return err
 	}

 	// Build the map for easy and faster processing
 	rcvdMeters := make(map[uint32]*ofp.OfpMeterStats)
 	for _, m := range ms.Items {
 		rcvdMeters[m.Stats.MeterId] = m.Stats
 	}

 	// Verify all meters that are in the controller but not in the device
 	missingMeters := []*of.Meter{}
 	for _, meter := range att.device.meters {

 		if att.stop {
 			break
 		}
 		logger.Debugw(ctx, "Auditing Meter", log.Fields{"Id": meter.ID})

 		if _, ok := rcvdMeters[meter.ID]; ok {
 			// The meter exists in the device too. Just remove it from
 			// the received meters
 			delete(rcvdMeters, meter.ID)
 		} else {
 			// The flow exists at the controller but not at the device
 			// Push the flow to the device
 			logger.Debugw(ctx, "Adding Meter To Missing Meters", log.Fields{"Id": meter.ID})
 			missingMeters = append(missingMeters, meter)
 		}
 	}
 	if !att.stop {
 		att.AddMissingMeters(missingMeters)
 		att.DelExcessMeters(rcvdMeters)
 	} else {
 		err = tasks.ErrTaskCancelError
 	}
 	return err
 }

 // AddMissingMeters adds the missing meters detected by AuditMeters
 func (att *AuditTablesTask) AddMissingMeters(meters []*of.Meter) {
 	logger.Debugw(ctx, "Adding missing meters", log.Fields{"Number": len(meters)})
 	for _, meter := range meters {
 		meterMod, err := of.MeterUpdate(att.device.ID, of.MeterCommandAdd, meter)
 		if err != nil {
 			logger.Errorw(ctx, "Update Meter Table Failed", log.Fields{"Reason": err.Error()})
 			continue
 		}
 		if vc := att.device.VolthaClient(); vc != nil {
 			if _, err = vc.UpdateLogicalDeviceMeterTable(att.ctx, meterMod); err != nil {
 				logger.Errorw(ctx, "Update Meter Table Failed", log.Fields{"Reason": err.Error()})
 			}
 		} else {
 			logger.Error(ctx, "Update Meter Table Failed: Voltha Client Unavailable")
 		}
 	}
 }

 // DelExcessMeters to delete excess meters
 func (att *AuditTablesTask) DelExcessMeters(meters map[uint32]*ofp.OfpMeterStats) {
 	logger.Debugw(ctx, "Deleting Excess Meters", log.Fields{"Number": len(meters)})
 	for _, meter := range meters {
 		meterMod := &ofp.OfpMeterMod{}
 		meterMod.Command = ofp.OfpMeterModCommand_OFPMC_DELETE
 		meterMod.MeterId = meter.MeterId
 		meterUpd := &ofp.MeterModUpdate{Id: att.device.ID, MeterMod: meterMod}
 		if vc := att.device.VolthaClient(); vc != nil {
 			if _, err := vc.UpdateLogicalDeviceMeterTable(att.ctx, meterUpd); err != nil {
 				logger.Errorw(ctx, "Update Meter Table Failed", log.Fields{"Reason": err.Error()})
 			}
 		} else {
 			logger.Error(ctx, "Update Meter Table Failed: Voltha Client Unavailable")
 		}
 	}
 }

 // AuditFlows audit the flows which includes fetching the existing meters at the
 // voltha and identifying the delta between the ones held here and the
 // ones held at VOLTHA. The delta must be cleaned up to keep both the
 // components in sync
 func (att *AuditTablesTask) AuditFlows(cntx context.Context) error {

 	if att.stop {
 		return tasks.ErrTaskCancelError
 	}

 	var vc voltha.VolthaServiceClient
 	if vc = att.device.VolthaClient(); vc == nil {
 		logger.Error(ctx, "Flow Audit Failed: Voltha Client Unavailable")
 		return nil
 	}

 	// ---------------------------------
 	// Perform the audit of flows first
 	// Retrieve the flows from the device
 	f, err := vc.ListLogicalDeviceFlows(att.ctx, &common.ID{Id: att.device.ID})
 	if err != nil {
 		logger.Warnw(ctx, "Audit of flows failed", log.Fields{"Reason": err.Error()})
 		return err
 	}

 	defaultSuccessFlowStatus := intf.FlowStatus{
 		Device:      att.device.ID,
 		FlowModType: of.CommandAdd,
 		Status:      0,
 		Reason:      "",
 	}

 	// Build the map for easy and faster processing
 	rcvdFlows := make(map[uint64]*ofp.OfpFlowStats)
 	flowsToAdd := &of.VoltFlow{}
 	flowsToAdd.SubFlows = make(map[uint64]*of.VoltSubFlow)
 	for _, flow := range f.Items {
 		rcvdFlows[flow.Cookie] = flow
 	}

 	att.device.flowLock.Lock()
 	// Verify all flows that are in the controller but not in the device
 	for _, flow := range att.device.flows {

 		if att.stop {
 			break
 		}

 		logger.Debugw(ctx, "Auditing Flow", log.Fields{"Cookie": flow.Cookie})
 		if _, ok := rcvdFlows[flow.Cookie]; ok {
 			// The flow exists in the device too. Just remove it from
 			// the received flows & trigger flow success indication unless
 			// the flow in del failure/pending state

 			if flow.State != of.FlowDelFailure && flow.State != of.FlowDelPending {
 				delete(rcvdFlows, flow.Cookie)
 			}
 			defaultSuccessFlowStatus.Cookie = strconv.FormatUint(flow.Cookie, 10)

 			logger.Infow(ctx, "Triggering Internal Flow Notification", log.Fields{"Flow Status": defaultSuccessFlowStatus})
 			GetController().ProcessFlowModResultIndication(cntx, defaultSuccessFlowStatus)
 		} else {
 			// The flow exists at the controller but not at the device
 			// Push the flow to the device
 			logger.Debugw(ctx, "Adding Flow To Missing Flows", log.Fields{"Cookie": flow.Cookie})
 			flowsToAdd.SubFlows[flow.Cookie] = flow
 		}
 	}
 	att.device.flowLock.Unlock()

 	if !att.stop {
 		//  The flows remaining in the received flows are the excess flows at
 		// the device. Delete those flows
 		att.DelExcessFlows(cntx, rcvdFlows)
 		// Add the flows missing at the device
 		att.AddMissingFlows(cntx, flowsToAdd)
 	} else {
 		err = tasks.ErrTaskCancelError
 	}
 	return err
 }

 // AddMissingFlows : The flows missing from the device are reinstalled att the audit
 // The flows are added into a VoltFlow structure.
 func (att *AuditTablesTask) AddMissingFlows(cntx context.Context, mflow *of.VoltFlow) {
 	logger.Debugw(ctx, "Add Missing Flows", log.Fields{"Number": len(mflow.SubFlows)})
 	mflow.Command = of.CommandAdd
 	ofFlows := of.ProcessVoltFlow(att.device.ID, mflow.Command, mflow.SubFlows)
 	var vc voltha.VolthaServiceClient
 	var bwConsumedInfo of.BwAvailDetails
 	if vc = att.device.VolthaClient(); vc == nil {
 		logger.Error(ctx, "Update Flow Table Failed: Voltha Client Unavailable")
 		return
 	}
 	for _, flow := range ofFlows {
 		var dbFlow *of.VoltSubFlow
 		var present bool
 		if flow.FlowMod != nil {
 			if dbFlow, present = att.device.GetFlow(flow.FlowMod.Cookie); !present {
 				logger.Warnw(ctx, "Flow Removed from DB. Ignoring Add Missing Flow", log.Fields{"Device": att.device.ID, "Cookie": flow.FlowMod.Cookie})
 				continue
 			}
 		}
 		var err error
 		if _, err = vc.UpdateLogicalDeviceFlowTable(att.ctx, flow); err != nil {
 			logger.Errorw(ctx, "Update Flow Table Failed", log.Fields{"Reason": err.Error()})
 		}
 		att.device.triggerFlowResultNotification(cntx, flow.FlowMod.Cookie, dbFlow, of.CommandAdd, bwConsumedInfo, err)
 	}
 }

 // DelExcessFlows delete the excess flows held at the VOLTHA
 func (att *AuditTablesTask) DelExcessFlows(cntx context.Context, flows map[uint64]*ofp.OfpFlowStats) {
 	logger.Debugw(ctx, "Deleting Excess Flows", log.Fields{"Number of Flows": len(flows)})

 	var vc voltha.VolthaServiceClient
 	if vc = att.device.VolthaClient(); vc == nil {
 		logger.Error(ctx, "Delete Excess Flows Failed: Voltha Client Unavailable")
 		return
 	}

 	// Let's cycle through the flows to delete the excess flows
 	for _, flow := range flows {

 		if _, present := att.device.GetFlow(flow.Cookie); present {
 			logger.Warnw(ctx, "Flow Present in DB. Ignoring Delete Excess Flow", log.Fields{"Device": att.device.ID, "Cookie": flow.Cookie})
 			continue
 		}

 		logger.Debugw(ctx, "Deleting Flow", log.Fields{"Cookie": flow.Cookie})
 		// Create the flowMod structure and fill it out
 		flowMod := &ofp.OfpFlowMod{}
 		flowMod.Cookie = flow.Cookie
 		flowMod.TableId = flow.TableId
 		flowMod.Command = ofp.OfpFlowModCommand_OFPFC_DELETE_STRICT
 		flowMod.IdleTimeout = flow.IdleTimeout
 		flowMod.HardTimeout = flow.HardTimeout
 		flowMod.Priority = flow.Priority
 		flowMod.BufferId = of.DefaultBufferID
 		flowMod.OutPort = of.DefaultOutPort
 		flowMod.OutGroup = of.DefaultOutGroup
 		flowMod.Flags = flow.Flags
 		flowMod.Match = flow.Match
 		flowMod.Instructions = flow.Instructions

 		// Create FlowTableUpdate
 		flowUpdate := &ofp.FlowTableUpdate{
 			Id:      att.device.ID,
 			FlowMod: flowMod,
 		}

 		var err error
 		if _, err = vc.UpdateLogicalDeviceFlowTable(att.ctx, flowUpdate); err != nil {
 			logger.Errorw(ctx, "Flow Audit Delete Failed", log.Fields{"Reason": err.Error()})
 		}
 		att.device.triggerFlowResultNotification(cntx, flow.Cookie, nil, of.CommandDel, of.BwAvailDetails{}, err)
 	}
 }

 // AuditGroups audit the groups which includes fetching the existing groups at the
 // voltha and identifying the delta between the ones held here and the
 // ones held at VOLTHA. The delta must be cleaned up to keep both the
 // components in sync
 func (att *AuditTablesTask) AuditGroups() (map[uint32]*ofp.OfpGroupDesc, error) {

 	// Build the map for easy and faster processing
 	rcvdGroups = make(map[uint32]*ofp.OfpGroupDesc)

 	if att.stop {
 		return rcvdGroups, tasks.ErrTaskCancelError
 	}

 	var vc voltha.VolthaServiceClient
 	if vc = att.device.VolthaClient(); vc == nil {
 		logger.Error(ctx, "Group Audit Failed: Voltha Client Unavailable")
 		return rcvdGroups, nil
 	}

 	// ---------------------------------
 	// Perform the audit of groups first
 	// Retrieve the groups from the device
 	g, err := vc.ListLogicalDeviceFlowGroups(att.ctx, &common.ID{Id: att.device.ID})
 	if err != nil {
 		logger.Warnw(ctx, "Audit of groups failed", log.Fields{"Reason": err.Error()})
 		return rcvdGroups, err
 	}

 	groupsToAdd = []*of.Group{}
 	groupsToMod = []*of.Group{}
 	for _, group := range g.Items {
 		rcvdGroups[group.Desc.GroupId] = group.Desc
 	}
 	logger.Infow(ctx, "Received Groups", log.Fields{"Groups": rcvdGroups})

 	// Verify all groups that are in the controller but not in the device
 	att.device.groups.Range(att.compareGroupEntries)

 	if !att.stop {
 		// Add the groups missing at the device
 		logger.Infow(ctx, "Missing Groups", log.Fields{"Groups": groupsToAdd})
 		att.AddMissingGroups(groupsToAdd)

 		// Update groups with group member mismatch
 		logger.Infow(ctx, "Modify Groups", log.Fields{"Groups": groupsToMod})
 		att.UpdateMismatchGroups(groupsToMod)

 		// Note: Excess groups will be deleted after ensuring the connected
 		// flows are also removed as part fo audit flows
 	} else {
 		err = tasks.ErrTaskCancelError
 	}
 	// The groups remaining in the received groups are the excess groups at
 	// the device
 	return rcvdGroups, err
 }

 // compareGroupEntries to compare the group entries
 func (att *AuditTablesTask) compareGroupEntries(key, value interface{}) bool {

 	if att.stop {
 		return false
 	}

 	groupID := key.(uint32)
 	dbGroup := value.(*of.Group)
 	logger.Debugw(ctx, "Auditing Group", log.Fields{"Groupid": groupID})
 	if rcvdGrp, ok := rcvdGroups[groupID]; ok {
 		// The group exists in the device too.
 		// Compare the group members and add to modify list if required
 		compareGroupMembers(dbGroup, rcvdGrp)
 		delete(rcvdGroups, groupID)
 	} else {
 		// The group exists at the controller but not at the device
 		// Push the group to the device
 		logger.Debugw(ctx, "Adding Group To Missing Groups", log.Fields{"GroupId": groupID})
 		groupsToAdd = append(groupsToAdd, value.(*of.Group))
 	}
 	return true
 }

 func compareGroupMembers(refGroup *of.Group, rcvdGroup *ofp.OfpGroupDesc) {

 	portList := []uint32{}
 	refPortList := []uint32{}

 	//Collect port list from response Group Mod structure
 	//If PON is configured even for one group, then only PON shall be considered for compared for all groups
 	for _, bucket := range rcvdGroup.Buckets {
 		for _, actionBucket := range bucket.Actions {
 			if actionBucket.Type == ofp.OfpActionType_OFPAT_OUTPUT {
 				action := actionBucket.GetOutput()
 				portList = append(portList, action.Port)
 			}
 		}
 	}

 	refPortList = append(refPortList, refGroup.Buckets...)

 	//Is port list differs, trigger group update
 	if !util.IsSliceSame(refPortList, portList) {
 		groupsToMod = append(groupsToMod, refGroup)
 	}
 }

 //AddMissingGroups - addmissing groups to Voltha
 func (att *AuditTablesTask) AddMissingGroups(groupList []*of.Group) {
 	att.PushGroups(groupList, of.GroupCommandAdd)
 }

 //UpdateMismatchGroups - updates mismatched groups to Voltha
 func (att *AuditTablesTask) UpdateMismatchGroups(groupList []*of.Group) {
 	att.PushGroups(groupList, of.GroupCommandMod)
 }

 // PushGroups - The groups missing/to be updated in the device are reinstalled att the audit
 func (att *AuditTablesTask) PushGroups(groupList []*of.Group, grpCommand of.GroupCommand) {
 	logger.Debugw(ctx, "Pushing Groups", log.Fields{"Number": len(groupList), "Command": grpCommand})

 	var vc voltha.VolthaServiceClient
 	if vc = att.device.VolthaClient(); vc == nil {
 		logger.Error(ctx, "Update Group Table Failed: Voltha Client Unavailable")
 		return
 	}
 	for _, group := range groupList {
 		group.Command = grpCommand
 		groupUpdate := of.CreateGroupTableUpdate(group)
 		if _, err := vc.UpdateLogicalDeviceFlowGroupTable(att.ctx, groupUpdate); err != nil {
 			logger.Errorw(ctx, "Update Group Table Failed", log.Fields{"Reason": err.Error()})
 		}
 	}
 }

 // DelExcessGroups - Delete the excess groups held at the VOLTHA
 func (att *AuditTablesTask) DelExcessGroups(groups map[uint32]*ofp.OfpGroupDesc) {
 	logger.Debugw(ctx, "Deleting Excess Groups", log.Fields{"Number of Groups": len(groups)})

 	var vc voltha.VolthaServiceClient
 	if vc = att.device.VolthaClient(); vc == nil {
 		logger.Error(ctx, "Delete Excess Groups Failed: Voltha Client Unavailable")
 		return
 	}

 	// Let's cycle through the groups to delete the excess groups
 	for _, groupDesc := range groups {
 		logger.Debugw(ctx, "Deleting Group", log.Fields{"GroupId": groupDesc.GroupId})
 		group := &of.Group{}
 		group.Device = att.device.ID
 		group.GroupID = groupDesc.GroupId

 		//Group Members should be deleted before triggered group delete
 		group.Command = of.GroupCommandMod
 		groupUpdate := of.CreateGroupTableUpdate(group)
 		if _, err := vc.UpdateLogicalDeviceFlowGroupTable(att.ctx, groupUpdate); err != nil {
 			logger.Errorw(ctx, "Update Group Table Failed", log.Fields{"Reason": err.Error()})
 		}

 		group.Command = of.GroupCommandDel
 		groupUpdate = of.CreateGroupTableUpdate(group)
 		if _, err := vc.UpdateLogicalDeviceFlowGroupTable(att.ctx, groupUpdate); err != nil {
 			logger.Errorw(ctx, "Update Group Table Failed", log.Fields{"Reason": err.Error()})
 		}
 	}
 }
	/*
	* Copyright 2022-present Open Networking Foundation
	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*/

	package controller

	import (
	"context"
	"strconv"
	"time"

	"voltha-go-controller/internal/pkg/intf"
	"voltha-go-controller/internal/pkg/of"
	"voltha-go-controller/internal/pkg/tasks"
	"voltha-go-controller/internal/pkg/util"
	"voltha-go-controller/log"
	"github.com/opencord/voltha-protos/v5/go/common"
	ofp "github.com/opencord/voltha-protos/v5/go/openflow_13"
	"github.com/opencord/voltha-protos/v5/go/voltha"
	)

	var (
	rcvdGroups map[uint32]*ofp.OfpGroupDesc
	groupsToAdd []*of.Group
	groupsToMod []*of.Group
	)

	// AuditTablesTask structure
	type AuditTablesTask struct {
	taskID uint8
	ctx context.Context
	device *Device
	stop bool
	timestamp string
	}

	// NewAuditTablesTask is constructor for AuditTablesTask
	func NewAuditTablesTask(device Device) AuditTablesTask {
	var att AuditTablesTask
	att.device = device
	att.stop = false
	tstamp := (time.Now()).Format(time.RFC3339Nano)
	att.timestamp = tstamp
	return &att
	}

	// Name returns name of the task
	func (att *AuditTablesTask) Name() string {
	return "Audit Table Task"
	}

	// TaskID to return task id of the task
	func (att *AuditTablesTask) TaskID() uint8 {
	return att.taskID
	}

	// Timestamp to return timestamp for the task
	func (att *AuditTablesTask) Timestamp() string {
	return att.timestamp
	}

	// Stop to stop the task
	func (att *AuditTablesTask) Stop() {
	att.stop = true
	}

	// Start is called by the framework and is responsible for implementing
	// the actual task.
	func (att *AuditTablesTask) Start(ctx context.Context, taskID uint8) error {
	logger.Warnw(ctx, "Audit Table Task Triggered", log.Fields{"Context": ctx, "taskId": taskID, "Device": att.device.ID})
	att.taskID = taskID
	att.ctx = ctx
	var errInfo error
	var err error

	// Audit the meters
	if err = att.AuditMeters(); err != nil {
	logger.Errorw(ctx, "Audit Meters Failed", log.Fields{"Reason": err.Error()})
	errInfo = err
	}

	// Audit the Groups
	if rcvdGroups, err = att.AuditGroups(); err != nil {
	logger.Errorw(ctx, "Audit Groups Failed", log.Fields{"Reason": err.Error()})
	errInfo = err
	}

	// Audit the flows
	if err = att.AuditFlows(ctx); err != nil {
	logger.Errorw(ctx, "Audit Flows Failed", log.Fields{"Reason": err.Error()})
	errInfo = err
	}

	// Triggering deletion of excess groups from device after the corresponding flows are removed
	// to avoid flow dependency error during group deletion
	logger.Infow(ctx, "Excess Groups", log.Fields{"Groups": rcvdGroups})
	att.DelExcessGroups(rcvdGroups)
	logger.Warnw(ctx, "Audit Table Task Completed", log.Fields{"Context": ctx, "taskId": taskID, "Device": att.device.ID})
	return errInfo

	}

	// AuditMeters : Audit the meters which includes fetching the existing meters at the
	// voltha and identifying the delta between the ones held here and the
	// ones held at VOLTHA. The delta must be cleaned up to keep both the
	// components in sync
	func (att *AuditTablesTask) AuditMeters() error {

	if att.stop {
	return tasks.ErrTaskCancelError
	}
	var vc voltha.VolthaServiceClient
	if vc = att.device.VolthaClient(); vc == nil {
	logger.Error(ctx, "Fetch Device Meters Failed: Voltha Client Unavailable")
	return nil
	}

	//-----------------------------
	// Perform the audit of meters
	// Fetch the meters
	ms, err := vc.ListLogicalDeviceMeters(att.ctx, &voltha.ID{Id: att.device.ID})
	if err != nil {
	logger.Warnw(ctx, "Audit of flows failed", log.Fields{"Reason": err.Error()})
	return err
	}

	// Build the map for easy and faster processing
	rcvdMeters := make(map[uint32]*ofp.OfpMeterStats)
	for _, m := range ms.Items {
	rcvdMeters[m.Stats.MeterId] = m.Stats
	}

	// Verify all meters that are in the controller but not in the device
	missingMeters := []*of.Meter{}
	for _, meter := range att.device.meters {

	if att.stop {
	break
	}
	logger.Debugw(ctx, "Auditing Meter", log.Fields{"Id": meter.ID})

	if _, ok := rcvdMeters[meter.ID]; ok {
	// The meter exists in the device too. Just remove it from
	// the received meters
	delete(rcvdMeters, meter.ID)
	} else {
	// The flow exists at the controller but not at the device
	// Push the flow to the device
	logger.Debugw(ctx, "Adding Meter To Missing Meters", log.Fields{"Id": meter.ID})
	missingMeters = append(missingMeters, meter)
	}
	}
	if !att.stop {
	att.AddMissingMeters(missingMeters)
	att.DelExcessMeters(rcvdMeters)
	} else {
	err = tasks.ErrTaskCancelError
	}
	return err
	}

	// AddMissingMeters adds the missing meters detected by AuditMeters
	func (att AuditTablesTask) AddMissingMeters(meters []of.Meter) {
	logger.Debugw(ctx, "Adding missing meters", log.Fields{"Number": len(meters)})
	for _, meter := range meters {
	meterMod, err := of.MeterUpdate(att.device.ID, of.MeterCommandAdd, meter)
	if err != nil {
	logger.Errorw(ctx, "Update Meter Table Failed", log.Fields{"Reason": err.Error()})
	continue
	}
	if vc := att.device.VolthaClient(); vc != nil {
	if _, err = vc.UpdateLogicalDeviceMeterTable(att.ctx, meterMod); err != nil {
	logger.Errorw(ctx, "Update Meter Table Failed", log.Fields{"Reason": err.Error()})
	}
	} else {
	logger.Error(ctx, "Update Meter Table Failed: Voltha Client Unavailable")
	}
	}
	}

	// DelExcessMeters to delete excess meters
	func (att AuditTablesTask) DelExcessMeters(meters map[uint32]ofp.OfpMeterStats) {
	logger.Debugw(ctx, "Deleting Excess Meters", log.Fields{"Number": len(meters)})
	for _, meter := range meters {
	meterMod := &ofp.OfpMeterMod{}
	meterMod.Command = ofp.OfpMeterModCommand_OFPMC_DELETE
	meterMod.MeterId = meter.MeterId
	meterUpd := &ofp.MeterModUpdate{Id: att.device.ID, MeterMod: meterMod}
	if vc := att.device.VolthaClient(); vc != nil {
	if _, err := vc.UpdateLogicalDeviceMeterTable(att.ctx, meterUpd); err != nil {
	logger.Errorw(ctx, "Update Meter Table Failed", log.Fields{"Reason": err.Error()})
	}
	} else {
	logger.Error(ctx, "Update Meter Table Failed: Voltha Client Unavailable")
	}
	}
	}

	// AuditFlows audit the flows which includes fetching the existing meters at the
	// voltha and identifying the delta between the ones held here and the
	// ones held at VOLTHA. The delta must be cleaned up to keep both the
	// components in sync
	func (att *AuditTablesTask) AuditFlows(cntx context.Context) error {

	if att.stop {
	return tasks.ErrTaskCancelError
	}

	var vc voltha.VolthaServiceClient
	if vc = att.device.VolthaClient(); vc == nil {
	logger.Error(ctx, "Flow Audit Failed: Voltha Client Unavailable")
	return nil
	}

	// ---------------------------------
	// Perform the audit of flows first
	// Retrieve the flows from the device
	f, err := vc.ListLogicalDeviceFlows(att.ctx, &common.ID{Id: att.device.ID})
	if err != nil {
	logger.Warnw(ctx, "Audit of flows failed", log.Fields{"Reason": err.Error()})
	return err
	}

	defaultSuccessFlowStatus := intf.FlowStatus{
	Device: att.device.ID,
	FlowModType: of.CommandAdd,
	Status: 0,
	Reason: "",
	}

	// Build the map for easy and faster processing
	rcvdFlows := make(map[uint64]*ofp.OfpFlowStats)
	flowsToAdd := &of.VoltFlow{}
	flowsToAdd.SubFlows = make(map[uint64]*of.VoltSubFlow)
	for _, flow := range f.Items {
	rcvdFlows[flow.Cookie] = flow
	}

	att.device.flowLock.Lock()
	// Verify all flows that are in the controller but not in the device
	for _, flow := range att.device.flows {

	if att.stop {
	break
	}

	logger.Debugw(ctx, "Auditing Flow", log.Fields{"Cookie": flow.Cookie})
	if _, ok := rcvdFlows[flow.Cookie]; ok {
	// The flow exists in the device too. Just remove it from
	// the received flows & trigger flow success indication unless
	// the flow in del failure/pending state

	if flow.State != of.FlowDelFailure && flow.State != of.FlowDelPending {
	delete(rcvdFlows, flow.Cookie)
	}
	defaultSuccessFlowStatus.Cookie = strconv.FormatUint(flow.Cookie, 10)

	logger.Infow(ctx, "Triggering Internal Flow Notification", log.Fields{"Flow Status": defaultSuccessFlowStatus})
	GetController().ProcessFlowModResultIndication(cntx, defaultSuccessFlowStatus)
	} else {
	// The flow exists at the controller but not at the device
	// Push the flow to the device
	logger.Debugw(ctx, "Adding Flow To Missing Flows", log.Fields{"Cookie": flow.Cookie})
	flowsToAdd.SubFlows[flow.Cookie] = flow
	}
	}
	att.device.flowLock.Unlock()

	if !att.stop {
	// The flows remaining in the received flows are the excess flows at
	// the device. Delete those flows
	att.DelExcessFlows(cntx, rcvdFlows)
	// Add the flows missing at the device
	att.AddMissingFlows(cntx, flowsToAdd)
	} else {
	err = tasks.ErrTaskCancelError
	}
	return err
	}

	// AddMissingFlows : The flows missing from the device are reinstalled att the audit
	// The flows are added into a VoltFlow structure.
	func (att AuditTablesTask) AddMissingFlows(cntx context.Context, mflow of.VoltFlow) {
	logger.Debugw(ctx, "Add Missing Flows", log.Fields{"Number": len(mflow.SubFlows)})
	mflow.Command = of.CommandAdd
	ofFlows := of.ProcessVoltFlow(att.device.ID, mflow.Command, mflow.SubFlows)
	var vc voltha.VolthaServiceClient
	var bwConsumedInfo of.BwAvailDetails
	if vc = att.device.VolthaClient(); vc == nil {
	logger.Error(ctx, "Update Flow Table Failed: Voltha Client Unavailable")
	return
	}
	for _, flow := range ofFlows {
	var dbFlow *of.VoltSubFlow
	var present bool
	if flow.FlowMod != nil {
	if dbFlow, present = att.device.GetFlow(flow.FlowMod.Cookie); !present {
	logger.Warnw(ctx, "Flow Removed from DB. Ignoring Add Missing Flow", log.Fields{"Device": att.device.ID, "Cookie": flow.FlowMod.Cookie})
	continue
	}
	}
	var err error
	if _, err = vc.UpdateLogicalDeviceFlowTable(att.ctx, flow); err != nil {
	logger.Errorw(ctx, "Update Flow Table Failed", log.Fields{"Reason": err.Error()})
	}
	att.device.triggerFlowResultNotification(cntx, flow.FlowMod.Cookie, dbFlow, of.CommandAdd, bwConsumedInfo, err)
	}
	}

	// DelExcessFlows delete the excess flows held at the VOLTHA
	func (att AuditTablesTask) DelExcessFlows(cntx context.Context, flows map[uint64]ofp.OfpFlowStats) {
	logger.Debugw(ctx, "Deleting Excess Flows", log.Fields{"Number of Flows": len(flows)})

	var vc voltha.VolthaServiceClient
	if vc = att.device.VolthaClient(); vc == nil {
	logger.Error(ctx, "Delete Excess Flows Failed: Voltha Client Unavailable")
	return
	}

	// Let's cycle through the flows to delete the excess flows
	for _, flow := range flows {

	if _, present := att.device.GetFlow(flow.Cookie); present {
	logger.Warnw(ctx, "Flow Present in DB. Ignoring Delete Excess Flow", log.Fields{"Device": att.device.ID, "Cookie": flow.Cookie})
	continue
	}

	logger.Debugw(ctx, "Deleting Flow", log.Fields{"Cookie": flow.Cookie})
	// Create the flowMod structure and fill it out
	flowMod := &ofp.OfpFlowMod{}
	flowMod.Cookie = flow.Cookie
	flowMod.TableId = flow.TableId
	flowMod.Command = ofp.OfpFlowModCommand_OFPFC_DELETE_STRICT
	flowMod.IdleTimeout = flow.IdleTimeout
	flowMod.HardTimeout = flow.HardTimeout
	flowMod.Priority = flow.Priority
	flowMod.BufferId = of.DefaultBufferID
	flowMod.OutPort = of.DefaultOutPort
	flowMod.OutGroup = of.DefaultOutGroup
	flowMod.Flags = flow.Flags
	flowMod.Match = flow.Match
	flowMod.Instructions = flow.Instructions

	// Create FlowTableUpdate
	flowUpdate := &ofp.FlowTableUpdate{
	Id: att.device.ID,
	FlowMod: flowMod,
	}

	var err error
	if _, err = vc.UpdateLogicalDeviceFlowTable(att.ctx, flowUpdate); err != nil {
	logger.Errorw(ctx, "Flow Audit Delete Failed", log.Fields{"Reason": err.Error()})
	}
	att.device.triggerFlowResultNotification(cntx, flow.Cookie, nil, of.CommandDel, of.BwAvailDetails{}, err)
	}
	}

	// AuditGroups audit the groups which includes fetching the existing groups at the
	// voltha and identifying the delta between the ones held here and the
	// ones held at VOLTHA. The delta must be cleaned up to keep both the
	// components in sync
	func (att AuditTablesTask) AuditGroups() (map[uint32]ofp.OfpGroupDesc, error) {

	// Build the map for easy and faster processing
	rcvdGroups = make(map[uint32]*ofp.OfpGroupDesc)

	if att.stop {
	return rcvdGroups, tasks.ErrTaskCancelError
	}

	var vc voltha.VolthaServiceClient
	if vc = att.device.VolthaClient(); vc == nil {
	logger.Error(ctx, "Group Audit Failed: Voltha Client Unavailable")
	return rcvdGroups, nil
	}

	// ---------------------------------
	// Perform the audit of groups first
	// Retrieve the groups from the device
	g, err := vc.ListLogicalDeviceFlowGroups(att.ctx, &common.ID{Id: att.device.ID})
	if err != nil {
	logger.Warnw(ctx, "Audit of groups failed", log.Fields{"Reason": err.Error()})
	return rcvdGroups, err
	}

	groupsToAdd = []*of.Group{}
	groupsToMod = []*of.Group{}
	for _, group := range g.Items {
	rcvdGroups[group.Desc.GroupId] = group.Desc
	}
	logger.Infow(ctx, "Received Groups", log.Fields{"Groups": rcvdGroups})

	// Verify all groups that are in the controller but not in the device
	att.device.groups.Range(att.compareGroupEntries)

	if !att.stop {
	// Add the groups missing at the device
	logger.Infow(ctx, "Missing Groups", log.Fields{"Groups": groupsToAdd})
	att.AddMissingGroups(groupsToAdd)

	// Update groups with group member mismatch
	logger.Infow(ctx, "Modify Groups", log.Fields{"Groups": groupsToMod})
	att.UpdateMismatchGroups(groupsToMod)

	// Note: Excess groups will be deleted after ensuring the connected
	// flows are also removed as part fo audit flows
	} else {
	err = tasks.ErrTaskCancelError
	}
	// The groups remaining in the received groups are the excess groups at
	// the device
	return rcvdGroups, err
	}

	// compareGroupEntries to compare the group entries
	func (att *AuditTablesTask) compareGroupEntries(key, value interface{}) bool {

	if att.stop {
	return false
	}

	groupID := key.(uint32)
	dbGroup := value.(*of.Group)
	logger.Debugw(ctx, "Auditing Group", log.Fields{"Groupid": groupID})
	if rcvdGrp, ok := rcvdGroups[groupID]; ok {
	// The group exists in the device too.
	// Compare the group members and add to modify list if required
	compareGroupMembers(dbGroup, rcvdGrp)
	delete(rcvdGroups, groupID)
	} else {
	// The group exists at the controller but not at the device
	// Push the group to the device
	logger.Debugw(ctx, "Adding Group To Missing Groups", log.Fields{"GroupId": groupID})
	groupsToAdd = append(groupsToAdd, value.(*of.Group))
	}
	return true
	}

	func compareGroupMembers(refGroup of.Group, rcvdGroup ofp.OfpGroupDesc) {

	portList := []uint32{}
	refPortList := []uint32{}

	//Collect port list from response Group Mod structure
	//If PON is configured even for one group, then only PON shall be considered for compared for all groups
	for _, bucket := range rcvdGroup.Buckets {
	for _, actionBucket := range bucket.Actions {
	if actionBucket.Type == ofp.OfpActionType_OFPAT_OUTPUT {
	action := actionBucket.GetOutput()
	portList = append(portList, action.Port)
	}
	}
	}

	refPortList = append(refPortList, refGroup.Buckets...)

	//Is port list differs, trigger group update
	if !util.IsSliceSame(refPortList, portList) {
	groupsToMod = append(groupsToMod, refGroup)
	}
	}

	//AddMissingGroups - addmissing groups to Voltha
	func (att AuditTablesTask) AddMissingGroups(groupList []of.Group) {
	att.PushGroups(groupList, of.GroupCommandAdd)
	}

	//UpdateMismatchGroups - updates mismatched groups to Voltha
	func (att AuditTablesTask) UpdateMismatchGroups(groupList []of.Group) {
	att.PushGroups(groupList, of.GroupCommandMod)
	}

	// PushGroups - The groups missing/to be updated in the device are reinstalled att the audit
	func (att AuditTablesTask) PushGroups(groupList []of.Group, grpCommand of.GroupCommand) {
	logger.Debugw(ctx, "Pushing Groups", log.Fields{"Number": len(groupList), "Command": grpCommand})

	var vc voltha.VolthaServiceClient
	if vc = att.device.VolthaClient(); vc == nil {
	logger.Error(ctx, "Update Group Table Failed: Voltha Client Unavailable")
	return
	}
	for _, group := range groupList {
	group.Command = grpCommand
	groupUpdate := of.CreateGroupTableUpdate(group)
	if _, err := vc.UpdateLogicalDeviceFlowGroupTable(att.ctx, groupUpdate); err != nil {
	logger.Errorw(ctx, "Update Group Table Failed", log.Fields{"Reason": err.Error()})
	}
	}
	}

	// DelExcessGroups - Delete the excess groups held at the VOLTHA
	func (att AuditTablesTask) DelExcessGroups(groups map[uint32]ofp.OfpGroupDesc) {
	logger.Debugw(ctx, "Deleting Excess Groups", log.Fields{"Number of Groups": len(groups)})

	var vc voltha.VolthaServiceClient
	if vc = att.device.VolthaClient(); vc == nil {
	logger.Error(ctx, "Delete Excess Groups Failed: Voltha Client Unavailable")
	return
	}

	// Let's cycle through the groups to delete the excess groups
	for _, groupDesc := range groups {
	logger.Debugw(ctx, "Deleting Group", log.Fields{"GroupId": groupDesc.GroupId})
	group := &of.Group{}
	group.Device = att.device.ID
	group.GroupID = groupDesc.GroupId

	//Group Members should be deleted before triggered group delete
	group.Command = of.GroupCommandMod
	groupUpdate := of.CreateGroupTableUpdate(group)
	if _, err := vc.UpdateLogicalDeviceFlowGroupTable(att.ctx, groupUpdate); err != nil {
	logger.Errorw(ctx, "Update Group Table Failed", log.Fields{"Reason": err.Error()})
	}

	group.Command = of.GroupCommandDel
	groupUpdate = of.CreateGroupTableUpdate(group)
	if _, err := vc.UpdateLogicalDeviceFlowGroupTable(att.ctx, groupUpdate); err != nil {
	logger.Errorw(ctx, "Update Group Table Failed", log.Fields{"Reason": err.Error()})
	}
	}
	}