| /* |
| * Copyright 2022-present Open Networking Foundation |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| package application |
| |
| import ( |
| "bytes" |
| "context" |
| "encoding/json" |
| "errors" |
| "net" |
| "reflect" |
| "sort" |
| "strconv" |
| "strings" |
| "sync" |
| infraerrorCodes "voltha-go-controller/internal/pkg/errorcodes" |
| |
| "github.com/google/gopacket/layers" |
| |
| "voltha-go-controller/database" |
| "voltha-go-controller/internal/pkg/controller" |
| cntlr "voltha-go-controller/internal/pkg/controller" |
| errorCodes "voltha-go-controller/internal/pkg/errorcodes" |
| "voltha-go-controller/internal/pkg/of" |
| "voltha-go-controller/internal/pkg/util" |
| "voltha-go-controller/log" |
| ) |
| |
| const ( |
| // DSLAttrEnabled constant |
| DSLAttrEnabled string = "ENABLED" |
| // DeviceAny constant |
| DeviceAny string = "DEVICE-ANY" |
| |
| ALL_FLOWS_PROVISIONED string = "ALL_FLOWS_PROVISIONED" |
| |
| NO_FLOWS_PROVISIONED string = "NO_FLOWS_PROVISIONED" |
| |
| FLOWS_PROVISIONED_PARTIALLY string = "FLOWS_PROVISIONED_PARTIALLY" |
| |
| SUBSCRIBER_DISABLED_IN_CONTROLLER string = "DISABLED_IN_CONTROLLER" |
| |
| SUBSCRIBER_NOT_IN_CONTROLLER string = "NOT_IN_CONTROLLER" |
| |
| ONT_FLOWS_PROVISION_STATE_UNUSED string = "ONT_FLOWS_PROVISION_STATE_UNUSED" |
| ) |
| |
| // VoltServiceCfg structure |
| // Name - Uniquely identifies a service across the entire application |
| // UniVlan - The VLAN of the packets entering the UNI of ONU |
| // CVlan - The VLAN to transalate to/from on the PON link |
| // SVlan - The outer VLAN to be used on the NNI of OLT. |
| // - In general, 4096 is used as NO VLAN for all the above |
| // SVlanTpid - SVlan Tag Protocol Identifier |
| // Pbits - Each bit of uint8 represents one p-bit. MSB is pbit 7 |
| // DhcpRelay - Whether it is turned on/off |
| // CircuitId - The circuit id to be used with DHCP relay. Unused otherwise |
| // RemoveId - Same as above |
| // Port - The access port for the service. Each service has a single access |
| // port. The converse is not always true |
| // MacLearning - If MAC learning is turned on, the MAC address learned from the |
| // the service activation is used in programming flows |
| // MacAddress - The MAC hardware address learnt on the UNI interface |
| // MacAddresses - Not yet implemented. To be used to learn more MAC addresses |
| type VoltServiceCfg struct { |
| Pbits []of.PbitType |
| Name string |
| CircuitID string |
| Port string |
| UsMeterProfile string |
| DsMeterProfile string |
| AggDsMeterProfile string |
| VnetID string |
| MvlanProfileName string |
| RemoteIDType string |
| DataRateAttr string |
| ServiceType string |
| DsRemarkPbitsMap map[int]int // Ex: Remark case {0:0,1:0} and No-remark case {1:1} |
| RemoteID []byte |
| MacAddr net.HardwareAddr |
| ONTEtherTypeClassification int |
| SchedID int |
| Trigger ServiceTrigger |
| MacLearning MacLearningType |
| PonPort uint32 |
| MinDataRateUs uint32 |
| MinDataRateDs uint32 |
| MaxDataRateUs uint32 |
| MaxDataRateDs uint32 |
| TechProfileID uint16 |
| SVlanTpid layers.EthernetType |
| UniVlan of.VlanType |
| CVlan of.VlanType |
| SVlan of.VlanType |
| UsPonCTagPriority of.PbitType |
| UsPonSTagPriority of.PbitType |
| DsPonSTagPriority of.PbitType |
| DsPonCTagPriority of.PbitType |
| VlanControl VlanControl |
| IsOption82Enabled bool |
| IgmpEnabled bool |
| McastService bool |
| AllowTransparent bool |
| EnableMulticastKPI bool |
| IsActivated bool |
| } |
| |
| // VoltServiceOper structure |
| type VoltServiceOper struct { |
| Metadata interface{} |
| PendingFlows map[string]bool |
| AssociatedFlows map[string]bool |
| BwAvailInfo string |
| //MacLearning bool |
| //MacAddr net.HardwareAddr |
| Device string |
| Ipv4Addr net.IP |
| Ipv6Addr net.IP |
| ServiceLock sync.RWMutex `json:"-"` |
| UsMeterID uint32 |
| DsMeterID uint32 |
| AggDsMeterID uint32 |
| UpdateInProgress bool |
| DeleteInProgress bool |
| DeactivateInProgress bool |
| ForceDelete bool |
| // Multiservice-Fix |
| UsHSIAFlowsApplied bool |
| DsHSIAFlowsApplied bool |
| UsDhcpFlowsApplied bool |
| DsDhcpFlowsApplied bool |
| IgmpFlowsApplied bool |
| Icmpv6FlowsApplied bool |
| } |
| |
| // VoltService structure |
| type VoltService struct { |
| VoltServiceOper |
| Version string |
| VoltServiceCfg |
| } |
| |
| // ServiceTrigger - Service activation trigger |
| type ServiceTrigger int |
| |
| const ( |
| // NBActivate - Service added due to NB Action |
| NBActivate ServiceTrigger = 0 |
| // ServiceVlanUpdate - Service added due to Svlan Update |
| ServiceVlanUpdate ServiceTrigger = 1 |
| ) |
| |
| // AppMutexes structure |
| type AppMutexes struct { |
| ServiceDataMutex sync.Mutex `json:"-"` |
| VnetMutex sync.Mutex `json:"-"` |
| } |
| |
| // MigrateServiceMetadata - migrate services request metadata |
| type MigrateServiceMetadata struct { |
| NewVnetID string |
| RequestID string |
| } |
| |
| // AppMutex variable |
| var AppMutex AppMutexes |
| |
| // NewVoltService for constructor for volt service |
| func NewVoltService(cfg *VoltServiceCfg) *VoltService { |
| var vs VoltService |
| vs.VoltServiceCfg = *cfg |
| vs.UsHSIAFlowsApplied = false |
| vs.DsHSIAFlowsApplied = false |
| vs.DeleteInProgress = false |
| vs.DeactivateInProgress = false |
| //vs.MacAddr, _ = net.ParseMAC("00:00:00:00:00:00") |
| vs.IsOption82Enabled = cfg.IsOption82Enabled |
| vs.MacAddr = cfg.MacAddr |
| vs.Ipv4Addr = net.ParseIP("0.0.0.0") |
| vs.Ipv6Addr = net.ParseIP("::") |
| vs.PendingFlows = make(map[string]bool) |
| vs.AssociatedFlows = make(map[string]bool) |
| return &vs |
| } |
| |
| // WriteToDb commit a service to the DB if service delete is not in-progress |
| func (vs *VoltService) WriteToDb(cntx context.Context) { |
| vs.ServiceLock.RLock() |
| defer vs.ServiceLock.RUnlock() |
| |
| if vs.DeleteInProgress { |
| logger.Warnw(ctx, "Skipping Redis Update for Service, Service delete in progress", log.Fields{"Service": vs.Name}) |
| return |
| } |
| vs.ForceWriteToDb(cntx) |
| } |
| |
| // ForceWriteToDb force commit a service to the DB |
| func (vs *VoltService) ForceWriteToDb(cntx context.Context) { |
| b, err := json.Marshal(vs) |
| |
| if err != nil { |
| logger.Errorw(ctx, "Json Marshal Failed for Service", log.Fields{"Service": vs.Name}) |
| return |
| } |
| if err1 := db.PutService(cntx, vs.Name, string(b)); err1 != nil { |
| logger.Errorw(ctx, "DB write oper failed for Service", log.Fields{"Service": vs.Name}) |
| } |
| } |
| |
| // isDataRateAttrPresent to check if data attribute is present |
| func (vs *VoltService) isDataRateAttrPresent() bool { |
| return vs.DataRateAttr == DSLAttrEnabled |
| } |
| |
| // DelFromDb delete a service from DB |
| func (vs *VoltService) DelFromDb(cntx context.Context) { |
| logger.Debugw(ctx, "Deleting Service from DB", log.Fields{"Name": vs.Name}) |
| // TODO - Need to understand and delete the second call |
| // Calling twice has worked though don't know why |
| _ = db.DelService(cntx, vs.Name) |
| _ = db.DelService(cntx, vs.Name) |
| } |
| |
| // MatchesVlans find the service that matches the VLANs. In this case it is |
| // purely based on CVLAN. The CVLAN can sufficiently be used to |
| // match a service |
| func (vs *VoltService) MatchesVlans(vlans []of.VlanType) bool { |
| if len(vlans) != 1 { |
| return false |
| } |
| |
| if vlans[0] == vs.CVlan { |
| return true |
| } |
| return false |
| } |
| |
| // MatchesPbits allows matching a service to a pbit. This is used |
| // to search for a service matching the pbits, typically to identify |
| // attributes for other flows such as DHCP, IGMP, etc. |
| func (vs *VoltService) MatchesPbits(pbits []of.PbitType) bool { |
| for _, pbit := range pbits { |
| for _, pb := range vs.Pbits { |
| if pb == pbit { |
| return true |
| } |
| } |
| } |
| return false |
| } |
| |
| // IsPbitExist allows matching a service to a pbit. This is used |
| // to search for a service matching the pbit |
| func (vs *VoltService) IsPbitExist(pbit of.PbitType) bool { |
| for _, pb := range vs.Pbits { |
| if pb == pbit { |
| return true |
| } |
| } |
| return false |
| } |
| |
| // AddHsiaFlows - Adds US & DS HSIA Flows for the service |
| func (vs *VoltService) AddHsiaFlows(cntx context.Context) { |
| if err := vs.AddUsHsiaFlows(cntx); err != nil { |
| statusCode, statusMessage := infraerrorCodes.GetErrorInfo(err) |
| vs.triggerServiceFailureInd(statusCode, statusMessage) |
| } |
| if err := vs.AddDsHsiaFlows(cntx); err != nil { |
| statusCode, statusMessage := infraerrorCodes.GetErrorInfo(err) |
| vs.triggerServiceFailureInd(statusCode, statusMessage) |
| } |
| } |
| |
| // DelHsiaFlows - Deletes US & DS HSIA Flows for the service |
| func (vs *VoltService) DelHsiaFlows(cntx context.Context) { |
| if err := vs.DelUsHsiaFlows(cntx); err != nil { |
| statusCode, statusMessage := infraerrorCodes.GetErrorInfo(err) |
| vs.triggerServiceFailureInd(statusCode, statusMessage) |
| } |
| |
| if err := vs.DelDsHsiaFlows(cntx); err != nil { |
| statusCode, statusMessage := infraerrorCodes.GetErrorInfo(err) |
| vs.triggerServiceFailureInd(statusCode, statusMessage) |
| } |
| } |
| |
| func (vs *VoltService) AddMeterToDevice(cntx context.Context) error { |
| if vs.DeleteInProgress || vs.UpdateInProgress { |
| logger.Errorw(ctx, "Ignoring Meter Push, Service deleteion In-Progress", log.Fields{"Device": vs.Device, "Service": vs.Name}) |
| } |
| va := GetApplication() |
| logger.Infow(ctx, "Configuring Meters for FTTB", log.Fields{"ServiceName": vs.Name}) |
| device, err := va.GetDeviceFromPort(vs.Port) |
| if err != nil { |
| logger.Errorw(ctx, "Error Getting Device", log.Fields{"Reason": err.Error()}) |
| return errorCodes.ErrDeviceNotFound |
| } else if device.State != controller.DeviceStateUP { |
| logger.Warnw(ctx, "Device state Down. Ignoring Meter Push", log.Fields{"Service": vs.Name, "Port": vs.Port}) |
| return nil |
| } |
| va.AddMeterToDevice(vs.Port, device.Name, vs.UsMeterID, 0) |
| va.AddMeterToDevice(vs.Port, device.Name, vs.DsMeterID, vs.AggDsMeterID) |
| return nil |
| } |
| |
| // AddUsHsiaFlows - Add US HSIA Flows for the service |
| func (vs *VoltService) AddUsHsiaFlows(cntx context.Context) error { |
| if vs.DeleteInProgress || vs.UpdateInProgress { |
| logger.Errorw(ctx, "Ignoring US HSIA Flow Push, Service deleteion In-Progress", log.Fields{"Device": vs.Device, "Service": vs.Name}) |
| return nil |
| } |
| |
| va := GetApplication() |
| logger.Infow(ctx, "Configuring US HSIA Service Flows", log.Fields{"ServiceName": vs.Name}) |
| if !vs.UsHSIAFlowsApplied || vgcRebooted { |
| device, err := va.GetDeviceFromPort(vs.Port) |
| if err != nil { |
| logger.Errorw(ctx, "Error Getting Device", log.Fields{"Reason": err.Error()}) |
| return errorCodes.ErrDeviceNotFound |
| } else if device.State != controller.DeviceStateUP { |
| logger.Warnw(ctx, "Device state Down. Ignoring US HSIA Flow Push", log.Fields{"Service": vs.Name, "Port": vs.Port}) |
| return nil |
| } |
| |
| vs.Device = device.Name |
| /* In case of DPU_MGMT_TRAFFIC the meters will be configured before US flow creation*/ |
| if vs.ServiceType != DpuMgmtTraffic { |
| va.AddMeterToDevice(vs.Port, device.Name, vs.UsMeterID, 0) |
| va.AddMeterToDevice(vs.Port, device.Name, vs.DsMeterID, vs.AggDsMeterID) |
| } |
| logger.Infow(ctx, "Adding HSIA flows", log.Fields{"Name": vs.Name}) |
| pBits := vs.Pbits |
| |
| // If no pbits configured for service, hence add PbitNone for flows |
| if len(vs.Pbits) == 0 { |
| pBits = append(pBits, PbitMatchNone) |
| } |
| for _, pbits := range pBits { |
| usflows, err := vs.BuildUsHsiaFlows(pbits) |
| if err != nil { |
| logger.Errorw(ctx, "Error Building HSIA US flows", log.Fields{"Reason": err.Error()}) |
| statusCode, statusMessage := infraerrorCodes.GetErrorInfo(err) |
| vs.triggerServiceFailureInd(statusCode, statusMessage) |
| continue |
| } |
| usflows.MigrateCookie = vgcRebooted |
| if err := vs.AddFlows(cntx, device, usflows); err != nil { |
| logger.Errorw(ctx, "Error adding HSIA US flows", log.Fields{"Reason": err.Error()}) |
| statusCode, statusMessage := infraerrorCodes.GetErrorInfo(err) |
| vs.triggerServiceFailureInd(statusCode, statusMessage) |
| } |
| } |
| vs.UsHSIAFlowsApplied = true |
| logger.Infow(ctx, "Pushed US HSIA Service Flows", log.Fields{"ServiceName": vs.Name}) |
| } |
| vs.WriteToDb(cntx) |
| return nil |
| } |
| |
| // AddDsHsiaFlows - Add DS HSIA Flows for the service |
| func (vs *VoltService) AddDsHsiaFlows(cntx context.Context) error { |
| if vs.DeleteInProgress { |
| logger.Errorw(ctx, "Ignoring DS HSIA Flow Push, Service deleteion In-Progress", log.Fields{"Device": vs.Device, "Service": vs.Name}) |
| return nil |
| } |
| |
| va := GetApplication() |
| logger.Infow(ctx, "Configuring DS HSIA Service Flows", log.Fields{"ServiceName": vs.Name}) |
| if !vs.DsHSIAFlowsApplied || vgcRebooted { |
| device, err := va.GetDeviceFromPort(vs.Port) |
| if err != nil { |
| logger.Errorw(ctx, "Error Getting Device", log.Fields{"Reason": err.Error()}) |
| return errorCodes.ErrDeviceNotFound |
| } else if device.State != controller.DeviceStateUP { |
| logger.Warnw(ctx, "Device state Down. Ignoring DS HSIA Flow Push", log.Fields{"Service": vs.Name, "Port": vs.Port}) |
| return nil |
| } |
| |
| va.AddMeterToDevice(vs.Port, device.Name, vs.DsMeterID, vs.AggDsMeterID) |
| logger.Infow(ctx, "Adding HSIA flows", log.Fields{"Name": vs.Name}) |
| |
| //If no pbits configured for service, hence add PbitNone for flows |
| if len(vs.DsRemarkPbitsMap) == 0 { |
| dsflows, err := vs.BuildDsHsiaFlows(of.PbitType(of.PbitMatchNone)) |
| if err != nil { |
| logger.Errorw(ctx, "Error Building HSIA DS flows", log.Fields{"Reason": err.Error()}) |
| return err |
| } |
| dsflows.MigrateCookie = vgcRebooted |
| if err = vs.AddFlows(cntx, device, dsflows); err != nil { |
| logger.Errorw(ctx, "Failed to add HSIA DS flows", log.Fields{"Reason": err}) |
| statusCode, statusMessage := infraerrorCodes.GetErrorInfo(err) |
| vs.triggerServiceFailureInd(statusCode, statusMessage) |
| } |
| } else { |
| // if all 8 p-bits are to be remarked to one-pbit, configure all-to-one remarking flow |
| if _, ok := vs.DsRemarkPbitsMap[int(of.PbitMatchAll)]; ok { |
| dsflows, err := vs.BuildDsHsiaFlows(of.PbitType(of.PbitMatchAll)) |
| if err != nil { |
| logger.Errorw(ctx, "Error Building HSIA DS flows", log.Fields{"Reason": err.Error()}) |
| return err |
| } |
| logger.Debug(ctx, "Add-one-match-all-pbit-flow") |
| dsflows.MigrateCookie = vgcRebooted |
| if err := vs.AddFlows(cntx, device, dsflows); err != nil { |
| logger.Errorw(ctx, "Failed to add HSIA DS flows", log.Fields{"Reason": err}) |
| statusCode, statusMessage := infraerrorCodes.GetErrorInfo(err) |
| vs.triggerServiceFailureInd(statusCode, statusMessage) |
| } |
| } else { |
| for matchPbit := range vs.DsRemarkPbitsMap { |
| dsflows, err := vs.BuildDsHsiaFlows(of.PbitType(matchPbit)) |
| if err != nil { |
| logger.Errorw(ctx, "Error Building HSIA DS flows", log.Fields{"Reason": err.Error()}) |
| statusCode, statusMessage := infraerrorCodes.GetErrorInfo(err) |
| vs.triggerServiceFailureInd(statusCode, statusMessage) |
| continue |
| } |
| dsflows.MigrateCookie = vgcRebooted |
| if err := vs.AddFlows(cntx, device, dsflows); err != nil { |
| logger.Errorw(ctx, "Failed to Add HSIA DS flows", log.Fields{"Reason": err}) |
| statusCode, statusMessage := infraerrorCodes.GetErrorInfo(err) |
| vs.triggerServiceFailureInd(statusCode, statusMessage) |
| } |
| } |
| } |
| } |
| vs.DsHSIAFlowsApplied = true |
| logger.Infow(ctx, "Pushed DS HSIA Service Flows", log.Fields{"ServiceName": vs.Name}) |
| } |
| vs.WriteToDb(cntx) |
| return nil |
| } |
| |
| // DelUsHsiaFlows - Deletes US HSIA Flows for the service |
| func (vs *VoltService) DelUsHsiaFlows(cntx context.Context) error { |
| logger.Infow(ctx, "Removing US HSIA Services", log.Fields{"Services": vs.Name}) |
| if vs.UsHSIAFlowsApplied || vgcRebooted { |
| device, err := GetApplication().GetDeviceFromPort(vs.Port) |
| if err != nil { |
| logger.Errorw(ctx, "Error Getting Device", log.Fields{"Reason": err.Error()}) |
| return errorCodes.ErrDeviceNotFound |
| } |
| |
| logger.Infow(ctx, "Removing HSIA flows", log.Fields{"Name": vs.Name}) |
| pBits := vs.Pbits |
| |
| // If no pbits configured for service, hence add PbitNone for flows |
| if len(vs.Pbits) == 0 { |
| pBits = append(pBits, PbitMatchNone) |
| } |
| for _, pbits := range pBits { |
| usflows, err := vs.BuildUsHsiaFlows(pbits) |
| if err != nil { |
| logger.Errorw(ctx, "Error Building HSIA US flows", log.Fields{"Reason": err.Error()}) |
| statusCode, statusMessage := infraerrorCodes.GetErrorInfo(err) |
| vs.triggerServiceFailureInd(statusCode, statusMessage) |
| continue |
| } |
| usflows.MigrateCookie = vgcRebooted |
| if err = vs.DelFlows(cntx, device, usflows); err != nil { |
| statusCode, statusMessage := infraerrorCodes.GetErrorInfo(err) |
| vs.triggerServiceFailureInd(statusCode, statusMessage) |
| } |
| } |
| vs.UsHSIAFlowsApplied = false |
| } |
| vs.WriteToDb(cntx) |
| return nil |
| } |
| |
| // DelDsHsiaFlows - Deletes DS HSIA Flows for the service |
| func (vs *VoltService) DelDsHsiaFlows(cntx context.Context) error { |
| logger.Infow(ctx, "Removing DS HSIA Services", log.Fields{"Services": vs.Name}) |
| if vs.DsHSIAFlowsApplied || vgcRebooted { |
| device, err := GetApplication().GetDeviceFromPort(vs.Port) |
| if err != nil { |
| logger.Errorw(ctx, "Error Getting Device", log.Fields{"Reason": err.Error()}) |
| return errorCodes.ErrDeviceNotFound |
| } |
| |
| logger.Infow(ctx, "Removing HSIA flows", log.Fields{"Name": vs.Name}) |
| var matchPbit int |
| // If no pbits configured for service, hence add PbitNone for flows |
| if len(vs.DsRemarkPbitsMap) == 0 { |
| dsflows, err := vs.BuildDsHsiaFlows(of.PbitType(PbitMatchNone)) |
| if err != nil { |
| logger.Errorw(ctx, "Error Building HSIA DS flows", log.Fields{"Reason": err.Error()}) |
| return err |
| } |
| dsflows.MigrateCookie = vgcRebooted |
| if err = vs.DelFlows(cntx, device, dsflows); err != nil { |
| statusCode, statusMessage := infraerrorCodes.GetErrorInfo(err) |
| vs.triggerServiceFailureInd(statusCode, statusMessage) |
| } |
| } else if _, ok := vs.DsRemarkPbitsMap[int(PbitMatchAll)]; ok { |
| dsflows, err := vs.BuildDsHsiaFlows(of.PbitType(int(PbitMatchAll))) |
| if err != nil { |
| logger.Errorw(ctx, "Error Building HSIA DS flows", log.Fields{"Reason": err.Error()}) |
| return err |
| } |
| dsflows.MigrateCookie = vgcRebooted |
| if err = vs.DelFlows(cntx, device, dsflows); err != nil { |
| statusCode, statusMessage := infraerrorCodes.GetErrorInfo(err) |
| vs.triggerServiceFailureInd(statusCode, statusMessage) |
| } |
| } else { |
| for matchPbit = range vs.DsRemarkPbitsMap { |
| dsflows, err := vs.BuildDsHsiaFlows(of.PbitType(matchPbit)) |
| if err != nil { |
| logger.Errorw(ctx, "Error Building HSIA DS flows", log.Fields{"Reason": err.Error()}) |
| statusCode, statusMessage := infraerrorCodes.GetErrorInfo(err) |
| vs.triggerServiceFailureInd(statusCode, statusMessage) |
| continue |
| } |
| dsflows.MigrateCookie = vgcRebooted |
| if err = vs.DelFlows(cntx, device, dsflows); err != nil { |
| statusCode, statusMessage := infraerrorCodes.GetErrorInfo(err) |
| vs.triggerServiceFailureInd(statusCode, statusMessage) |
| } |
| } |
| } |
| vs.DsHSIAFlowsApplied = false |
| } |
| logger.Infow(ctx, "Deleted HSIA DS flows from DB successfully", log.Fields{"ServiceName": vs.Name}) |
| // Post HSIA configuration success indication on message bus |
| vs.WriteToDb(cntx) |
| return nil |
| } |
| |
| // BuildDsHsiaFlows build the DS HSIA flows |
| // Called for add/delete HSIA flows |
| func (vs *VoltService) BuildDsHsiaFlows(pbits of.PbitType) (*of.VoltFlow, error) { |
| flow := &of.VoltFlow{} |
| flow.SubFlows = make(map[uint64]*of.VoltSubFlow) |
| |
| // Get the out and in ports for the flows |
| device, err := GetApplication().GetDeviceFromPort(vs.Port) |
| if err != nil { |
| return nil, errorCodes.ErrDeviceNotFound |
| } |
| inport, _ := GetApplication().GetPortID(device.NniPort) |
| outport, _ := GetApplication().GetPortID(vs.Port) |
| // PortName and PortID to be used for validation of port before flow pushing |
| flow.PortID = outport |
| flow.PortName = vs.Port |
| allowTransparent := 0 |
| if vs.AllowTransparent { |
| allowTransparent = 1 |
| } |
| |
| // initialized actnPbit to 0 for cookie genration backward compatibility. |
| var actnPbit of.PbitType |
| remarkPbit, remarkExists := vs.DsRemarkPbitsMap[int(pbits)] |
| |
| generateDSCookie := func(vlan of.VlanType, valToShift uint64) uint64 { |
| // | 12-bit cvlan/UniVlan | 4 bits action pbit | <32-bits uniport>| 16-bits HSIA mask OR flow mask OR pbit | |
| cookie := uint64(vlan)<<52 + uint64(actnPbit)<<48 + uint64(outport)<<16 | of.HsiaFlowMask |
| cookie = cookie | of.DsFlowMask |
| cookie = cookie + (valToShift << 4) + uint64(pbits) |
| return cookie |
| } |
| |
| l2ProtoValue, err := GetMetadataForL2Protocol(vs.SVlanTpid) |
| if err != nil { |
| logger.Errorw(ctx, "DS HSIA flow push failed: Invalid SvlanTpid", log.Fields{"SvlanTpid": vs.SVlanTpid, "Service": vs.Name}) |
| return nil, err |
| } |
| |
| // Add Table-0 flow that deals with the outer VLAN in pOLT |
| { |
| subflow1 := of.NewVoltSubFlow() |
| subflow1.SetTableID(0) |
| subflow1.SetGoToTable(1) |
| subflow1.SetInPort(inport) |
| |
| if pbits != PbitMatchNone { |
| subflow1.SetMatchPbit(pbits) |
| } |
| if remarkExists && (of.PbitType(remarkPbit) != pbits) { |
| subflow1.SetPcp(of.PbitType(remarkPbit)) |
| // match & action pbits are different, set remark-pbit action |
| actnPbit = of.PbitType(remarkPbit) |
| // mask remark p-bit to 4bits |
| actnPbit = actnPbit & 0x0F |
| } |
| |
| if err := vs.setDSMatchActionVlanT0(subflow1); err != nil { |
| return nil, err |
| } |
| logger.Infow(ctx, "HSIA DS flows MAC Learning & MAC", log.Fields{"ML": vs.MacLearning, "Mac": vs.MacAddr}) |
| if NonZeroMacAddress(vs.MacAddr) { |
| subflow1.SetMatchDstMac(vs.MacAddr) |
| } |
| subflow1.Priority = of.HsiaFlowPriority |
| subflow1.SetMeterID(vs.DsMeterID) |
| |
| /* WriteMetaData 8 Byte(uint64) usage: |
| | Byte8 | Byte7 | Byte6 | Byte5 | Byte4 | Byte3 | Byte2 | Byte1 | |
| | reserved | reserved | TpID | TpID | uinID | uniID | uniID | uniID | */ |
| metadata := uint64(vs.CVlan)<<48 + uint64(vs.TechProfileID)<<32 + uint64(outport) |
| if vs.ServiceType == FttbSubscriberTraffic { |
| metadata = uint64(of.VlanAny)<<48 + uint64(vs.TechProfileID)<<32 + uint64(outport) |
| } |
| subflow1.SetWriteMetadata(metadata) |
| |
| /* TableMetaData 8 Byte(uint64) Voltha usage: (Considering MSB bit as 63rd bit and LSB bit as 0th bit) |
| | Byte8 | Byte7 | Byte6 | Byte5 | Byte4 | Byte3 | Byte2 | Byte1 | |
| | 0000 | 00 | 0 | 0 | 00000000 | 00000000 | 0000 0000 | 00000000 | 00000000 | 00000000 | 00000000| |
| | reserved | svlanTpID | Buff us | AT | schedID | schedID | onteth vlanCtrl | unitag | unitag | ctag | ctag | */ |
| |
| //TODO-COMM: |
| /* TableMetaData 8 Byte(uint64) Community usage: (Considering MSB bit as 63rd bit and LSB bit as 0th bit) |
| | Byte8 | Byte7 | Byte6 | Byte5 | Byte4 | Byte3 | Byte2 | Byte1 | |
| | 0000 | 00 | 0 | 0 | 00000000 | 00000000 | 0000 0000 | 00000000 | 00000000 | 00000000 | 00000000| |
| | reserved | svlanTpID | Buff us | AT | schedID | schedID | onteth vlanCtrl | ctag | ctag | ctag | ctag | */ |
| |
| if vs.ServiceType != FttbSubscriberTraffic { |
| metadata = uint64(l2ProtoValue)<<58 | uint64(allowTransparent)<<56 | uint64(vs.SchedID)<<40 | uint64(vs.ONTEtherTypeClassification)<<36 | uint64(vs.VlanControl)<<32 | uint64(vs.CVlan) |
| subflow1.SetTableMetadata(metadata) |
| } |
| // TODO - We are using cookie as key and must come up with better cookie |
| // allocation algorithm |
| /** |
| * Cokies may clash when - |
| * on same uni-port we have two sub-service |
| * 1. U=10, C=100, S=310, p-bit=4 - VLAN_Control = OLT_CVLAN_OLT_SVLAN |
| * 2. U=10, C=10, S=320, p-bit=4 - VLAN_control = ONU_CVLAN_ONU_SVLAN |
| * However, this p-bit re-use will not be allowed by sub-mgr. |
| */ |
| if vs.VlanControl == OLTCVlanOLTSVlan { |
| /** |
| * The new cookie generation is only for OLT_CVLAN_OLT_SVLAN case (TEF residential case) within a UNI. |
| * After vgc upgrade, if we have to deactivate an already existing TEF residential service, then we have to |
| * use old cookie. |
| */ |
| subflow1.Cookie = generateDSCookie(vs.UniVlan, 0) |
| if vgcRebooted { |
| subflow1.OldCookie = generateDSCookie(vs.CVlan, 0) |
| } |
| } else { |
| // In case of Olt_Svlan , CVLAN=UNIVLAN so cookie can be constructed with CVLAN as well |
| subflow1.Cookie = generateDSCookie(vs.CVlan, 0) |
| } |
| |
| flow.SubFlows[subflow1.Cookie] = subflow1 |
| logger.Infow(ctx, "Building downstream HSIA flow for T0", log.Fields{"cookie": subflow1.Cookie, |
| "subflow": subflow1}) |
| } |
| |
| // Add Table-1 flow that deals with inner VLAN at the ONU |
| { |
| subflow2 := of.NewVoltSubFlow() |
| subflow2.SetTableID(1) |
| subflow2.SetInPort(inport) |
| if NonZeroMacAddress(vs.MacAddr) { |
| subflow2.SetMatchDstMac(vs.MacAddr) |
| } |
| |
| if err := vs.setDSMatchActionVlanT1(subflow2); err != nil { |
| return nil, err |
| } |
| if pbits != PbitMatchNone { |
| subflow2.SetMatchPbit(pbits) |
| } |
| |
| if remarkExists && (of.PbitType(remarkPbit) != pbits) { |
| subflow2.SetPcp(of.PbitType(remarkPbit)) |
| } |
| |
| subflow2.SetOutPort(outport) |
| subflow2.SetMeterID(vs.DsMeterID) |
| |
| // refer Table-0 flow generation for byte information |
| metadata := uint64(vs.CVlan)<<48 + uint64(vs.TechProfileID)<<32 + uint64(outport) |
| if vs.ServiceType == FttbSubscriberTraffic { |
| metadata = uint64(of.VlanAny)<<48 + uint64(vs.TechProfileID)<<32 + uint64(outport) |
| } |
| subflow2.SetWriteMetadata(metadata) |
| |
| // Table-1 and inport is NNI: It is a DS flow for ONU, add uniport in metadata to make it unique |
| if util.IsNniPort(inport) { |
| metadata = uint64(outport) |
| } else { |
| // refer Table-0 flow generation for byte information |
| metadata = uint64(l2ProtoValue)<<58 | uint64(allowTransparent)<<56 | uint64(vs.SchedID)<<40 | uint64(vs.ONTEtherTypeClassification)<<36 | uint64(vs.VlanControl)<<32 | uint64(vs.CVlan) |
| } |
| subflow2.SetTableMetadata(metadata) |
| // Setting of Cookie - TODO - Improve the allocation algorithm |
| if vs.VlanControl == OLTCVlanOLTSVlan { |
| /** |
| * The new cookie generation is only for OLT_CVLAN_OLT_SVLAN case (TEF residential case) within a UNI. |
| * After vgc upgrade, if we have to deactivate an already existing TEF residential service, then we have to |
| * use old cookie. |
| */ |
| subflow2.Cookie = generateDSCookie(vs.UniVlan, 1) |
| if vgcRebooted { |
| subflow2.OldCookie = generateDSCookie(vs.CVlan, 1) |
| } |
| } else { |
| // In case of Olt_Svlan , CVLAN=UNIVLAN so cookie can be constructed with CVLAN as well |
| subflow2.Cookie = generateDSCookie(vs.CVlan, 1) |
| } |
| |
| subflow2.Priority = of.HsiaFlowPriority |
| flow.SubFlows[subflow2.Cookie] = subflow2 |
| logger.Infow(ctx, "Building downstream HSIA flow for T1", log.Fields{"cookie": subflow2.Cookie, |
| "subflow": subflow2}) |
| } |
| |
| return flow, nil |
| } |
| |
| // BuildUsHsiaFlows build the US HSIA flows |
| // Called for add/delete HSIA flows |
| func (vs *VoltService) BuildUsHsiaFlows(pbits of.PbitType) (*of.VoltFlow, error) { |
| flow := &of.VoltFlow{} |
| flow.SubFlows = make(map[uint64]*of.VoltSubFlow) |
| |
| // Get the out and in ports for the flows |
| device, err := GetApplication().GetDeviceFromPort(vs.Port) |
| if err != nil { |
| return nil, errorCodes.ErrDeviceNotFound |
| } |
| outport, _ := GetApplication().GetPortID(device.NniPort) |
| inport, _ := GetApplication().GetPortID(vs.Port) |
| // PortName and PortID to be used for validation of port before flow pushing |
| flow.PortID = inport |
| flow.PortName = vs.Port |
| |
| // Add Table-0 flow that deals with the inner VLAN in ONU |
| { |
| subflow1 := of.NewVoltSubFlow() |
| subflow1.SetTableID(0) |
| subflow1.SetGoToTable(1) |
| subflow1.SetInPort(inport) |
| |
| if vs.ServiceType == DpuMgmtTraffic { |
| subflow1.SetMatchPbit(vs.UsPonCTagPriority) |
| subflow1.SetPcp(vs.UsPonSTagPriority) |
| } else if vs.ServiceType == DpuAncpTraffic { |
| subflow1.SetPcp(vs.UsPonSTagPriority) |
| } |
| if err := vs.setUSMatchActionVlanT0(subflow1); err != nil { |
| return nil, err |
| } |
| subflow1.SetMeterID(vs.UsMeterID) |
| |
| /* WriteMetaData 8 Byte(uint64) usage: |
| | Byte8 | Byte7 | Byte6 | Byte5 | Byte4 | Byte3 | Byte2 | Byte1 | |
| | reserved | reserved | TpID | TpID | uinID | uniID | uniID | uniID | */ |
| //metadata := uint64(vs.CVlan)<<48 + uint64(vs.TechProfileID)<<32 + uint64(outport) |
| metadata := uint64(vs.TechProfileID)<<32 + uint64(outport) |
| if vs.ServiceType == FttbSubscriberTraffic { |
| metadata = uint64(of.VlanAny)<<48 + uint64(vs.TechProfileID)<<32 + uint64(outport) |
| } |
| subflow1.SetWriteMetadata(metadata) |
| |
| if vs.VlanControl == OLTCVlanOLTSVlan { |
| /** |
| * The new cookie generation is only for OLT_CVLAN_OLT_SVLAN case (TEF residential case) within a UNI. |
| * After vgc upgrade, if we have to deactivate an already existing TEF residential service, then we have to |
| * use old cookie. |
| */ |
| subflow1.Cookie = vs.generateUSCookie(vs.UniVlan, 0, inport, pbits) |
| if vgcRebooted { |
| subflow1.OldCookie = vs.generateUSCookie(vs.CVlan, 0, inport, pbits) |
| } |
| } else { |
| // In case of Olt_Svlan , CVLAN=UNIVLAN so cookie can be constructed with CVLAN as well |
| subflow1.Cookie = vs.generateUSCookie(vs.CVlan, 0, inport, pbits) |
| } |
| subflow1.Priority = of.HsiaFlowPriority |
| flow.SubFlows[subflow1.Cookie] = subflow1 |
| logger.Infow(ctx, "Building upstream HSIA flow for T0", log.Fields{"cookie": subflow1.Cookie, "subflow": subflow1}) |
| } |
| |
| // Add Table-1 flow that deals with the outer vlan in pOLT |
| { |
| subflow2 := of.NewVoltSubFlow() |
| subflow2.SetTableID(1) |
| subflow2.SetInPort(inport) |
| |
| if err := vs.setUSMatchActionVlanT1(subflow2); err != nil { |
| return nil, err |
| } |
| if vs.ServiceType == DpuMgmtTraffic { |
| subflow2.SetMatchSrcMac(vs.MacAddr) |
| } |
| subflow2.SetInPort(inport) |
| subflow2.SetOutPort(outport) |
| subflow2.SetMeterID(vs.UsMeterID) |
| |
| // refer Table-0 flow generation for byte information |
| metadata := uint64(vs.TechProfileID)<<32 + uint64(outport) |
| if vs.ServiceType == FttbSubscriberTraffic { |
| metadata = uint64(of.VlanAny)<<48 + uint64(vs.TechProfileID)<<32 + uint64(outport) |
| } |
| subflow2.SetWriteMetadata(metadata) |
| |
| if vs.VlanControl == OLTCVlanOLTSVlan { |
| /** |
| * The new cookie generation is only for OLT_CVLAN_OLT_SVLAN case (TEF residential case) within a UNI. |
| * After vgc upgrade, if we have to deactivate an already existing TEF residential service, then we have to |
| * use old cookie. |
| */ |
| subflow2.Cookie = vs.generateUSCookie(vs.UniVlan, 1, inport, pbits) |
| if vgcRebooted { |
| subflow2.OldCookie = vs.generateUSCookie(vs.CVlan, 1, inport, pbits) |
| } |
| } else { |
| // In case of Olt_Svlan , CVLAN=UNIVLAN so cookie can be constructed with CVLAN as well |
| subflow2.Cookie = vs.generateUSCookie(vs.CVlan, 1, inport, pbits) |
| } |
| subflow2.Priority = of.HsiaFlowPriority |
| |
| flow.SubFlows[subflow2.Cookie] = subflow2 |
| logger.Infow(ctx, "Building upstream HSIA flow for T1", log.Fields{"cookie": subflow2.Cookie, "subflow": subflow2}) |
| } |
| |
| return flow, nil |
| } |
| |
| func (vs *VoltService) generateUSCookie(vlan of.VlanType, valToShift uint64, inport uint32, pbits of.PbitType) uint64 { |
| // | 12-bit cvlan/UniVlan | 4 bits empty | <32-bits uniport>| 16-bits HSIA mask OR flow mask OR pbit | |
| cookie := uint64(vlan)<<52 + uint64(inport)<<16 | of.HsiaFlowMask |
| cookie = cookie | of.UsFlowMask |
| cookie = cookie + (valToShift << 4) + uint64(pbits) |
| return cookie |
| } |
| |
| // setUSMatchActionVlanT1 - Sets the Match & Action w.r.t Vlans for US Table-1 |
| // based on different Vlan Controls |
| func (vs *VoltService) setUSMatchActionVlanT1(flow *of.VoltSubFlow) error { |
| switch vs.VlanControl { |
| case None: |
| flow.SetMatchVlan(vs.SVlan) |
| case ONUCVlanOLTSVlan: |
| flow.SetMatchVlan(vs.CVlan) |
| flow.SetPushVlan(vs.SVlan, vs.SVlanTpid) |
| case OLTCVlanOLTSVlan: |
| flow.SetMatchVlan(vs.UniVlan) |
| flow.SetSetVlan(vs.CVlan) |
| flow.SetPushVlan(vs.SVlan, vs.SVlanTpid) |
| case ONUCVlan: |
| flow.SetMatchVlan(vs.SVlan) |
| case OLTSVlan: |
| if vs.UniVlan != of.VlanAny && vs.UniVlan != of.VlanNone { |
| flow.SetMatchVlan(vs.UniVlan) |
| flow.SetSetVlan(vs.SVlan) |
| } else if vs.UniVlan != of.VlanNone { |
| flow.SetMatchVlan(vs.UniVlan) |
| flow.SetPushVlan(vs.SVlan, layers.EthernetTypeDot1Q) |
| } else { |
| flow.SetPushVlan(vs.SVlan, layers.EthernetTypeDot1Q) |
| } |
| default: |
| logger.Errorw(ctx, "Invalid Vlan Control Option", log.Fields{"Value": vs.VlanControl}) |
| return errorCodes.ErrInvalidParamInRequest |
| } |
| return nil |
| } |
| |
| // setDSMatchActionVlanT0 - Sets the Match & Action w.r.t Vlans for DS Table-0 |
| // based on different Vlan Controls |
| func (vs *VoltService) setDSMatchActionVlanT0(flow *of.VoltSubFlow) error { |
| switch vs.VlanControl { |
| case None: |
| flow.SetMatchVlan(vs.SVlan) |
| case ONUCVlanOLTSVlan: |
| flow.SetMatchVlan(vs.SVlan) |
| flow.SetPopVlan() |
| case OLTCVlanOLTSVlan: |
| flow.SetMatchVlan(vs.SVlan) |
| flow.SetPopVlan() |
| flow.SetSetVlan(vs.UniVlan) |
| case ONUCVlan: |
| flow.SetMatchVlan(vs.SVlan) |
| case OLTSVlan: |
| flow.SetMatchVlan(vs.SVlan) |
| if vs.UniVlan != of.VlanNone && vs.UniVlan != of.VlanAny { |
| flow.SetSetVlan(vs.UniVlan) |
| } else { |
| flow.SetPopVlan() |
| } |
| default: |
| logger.Errorw(ctx, "Invalid Vlan Control Option", log.Fields{"Value": vs.VlanControl}) |
| return errorCodes.ErrInvalidParamInRequest |
| } |
| return nil |
| } |
| |
| // setUSMatchActionVlanT0 - Sets the Match & Action w.r.t Vlans for US Table-0 |
| // based on different Vlan Controls |
| func (vs *VoltService) setUSMatchActionVlanT0(flow *of.VoltSubFlow) error { |
| switch vs.VlanControl { |
| case None: |
| flow.SetMatchVlan(vs.SVlan) |
| case ONUCVlanOLTSVlan: |
| if vs.UniVlan != of.VlanNone { |
| flow.SetMatchVlan(vs.UniVlan) |
| flow.SetSetVlan(vs.CVlan) |
| } else { |
| flow.SetPushVlan(vs.CVlan, layers.EthernetTypeDot1Q) |
| } |
| case OLTCVlanOLTSVlan: |
| flow.SetMatchVlan(vs.UniVlan) |
| case ONUCVlan: |
| if vs.UniVlan != of.VlanNone { |
| flow.SetMatchVlan(vs.UniVlan) |
| flow.SetSetVlan(vs.SVlan) |
| } else { |
| flow.SetPushVlan(vs.SVlan, layers.EthernetTypeDot1Q) |
| } |
| case OLTSVlan: |
| flow.SetMatchVlan(vs.UniVlan) |
| default: |
| logger.Errorw(ctx, "Invalid Vlan Control Option", log.Fields{"Value": vs.VlanControl}) |
| return errorCodes.ErrInvalidParamInRequest |
| } |
| return nil |
| } |
| |
| // setDSMatchActionVlanT1 - Sets the Match & Action w.r.t Vlans for DS Table-1 |
| // based on different Vlan Controls |
| func (vs *VoltService) setDSMatchActionVlanT1(flow *of.VoltSubFlow) error { |
| switch vs.VlanControl { |
| case None: |
| flow.SetMatchVlan(vs.SVlan) |
| case ONUCVlanOLTSVlan: |
| flow.SetMatchVlan(vs.CVlan) |
| if vs.UniVlan != of.VlanNone { |
| flow.SetSetVlan(vs.UniVlan) |
| } else { |
| flow.SetPopVlan() |
| } |
| case OLTCVlanOLTSVlan: |
| flow.SetMatchVlan(vs.UniVlan) |
| case ONUCVlan: |
| flow.SetMatchVlan(vs.SVlan) |
| if vs.UniVlan != of.VlanNone { |
| flow.SetSetVlan(vs.UniVlan) |
| } else { |
| flow.SetPopVlan() |
| } |
| case OLTSVlan: |
| flow.SetMatchVlan(vs.UniVlan) |
| default: |
| logger.Errorw(ctx, "Invalid Vlan Control Option", log.Fields{"Value": vs.VlanControl}) |
| return errorCodes.ErrInvalidParamInRequest |
| } |
| return nil |
| } |
| |
| // SvcUpInd for service up indication |
| func (vs *VoltService) SvcUpInd(cntx context.Context) { |
| vs.AddHsiaFlows(cntx) |
| } |
| |
| // SvcDownInd for service down indication |
| func (vs *VoltService) SvcDownInd(cntx context.Context) { |
| vs.DelHsiaFlows(cntx) |
| } |
| |
| // SetIpv4Addr to set ipv4 address |
| func (vs *VoltService) SetIpv4Addr(addr net.IP) { |
| vs.Ipv4Addr = addr |
| } |
| |
| // SetIpv6Addr to set ipv6 address |
| func (vs *VoltService) SetIpv6Addr(addr net.IP) { |
| vs.Ipv6Addr = addr |
| } |
| |
| // SetMacAddr to set mac address |
| func (vs *VoltService) SetMacAddr(addr net.HardwareAddr) { |
| vs.MacAddr = addr |
| } |
| |
| // ---------------------------------------------- |
| // VOLT Application - Related to services |
| // --------------------------------------------- |
| // --------------------------------------------------------------- |
| // Service CRUD functions. These are exposed to the overall binary |
| // to be invoked from the point where the CRUD operations are received |
| // from the external entities |
| |
| // AddService : A service in the context of VOLT is a subscriber or service of a |
| // subscriber which is uniquely identified by a combination of MAC |
| // address, VLAN tags, 802.1p bits. However, in the context of the |
| // current implementation, a service is an entity that is identified by a |
| // unique L2 (MAC address + VLANs) or unique L3 (VLANs + IP address) |
| // FUNC: Add Service |
| func (va *VoltApplication) AddService(cntx context.Context, cfg VoltServiceCfg, oper *VoltServiceOper) error { |
| var mmUs, mmDs *VoltMeter |
| var err error |
| |
| // Take the Device lock only in case of NB add request. |
| // Allow internal adds since internal add happen only under |
| // 1. Restore Service from DB |
| // 2. Service Migration |
| if oper == nil { |
| if svc := va.GetService(cfg.Name); svc != nil { |
| logger.Warnw(ctx, "Service Already Exists. Ignoring Add Service Request", log.Fields{"Name": cfg.Name}) |
| return errors.New("Service Already Exists") |
| } |
| } |
| |
| logger.Infow(ctx, "Service to be configured", log.Fields{"Cfg": cfg}) |
| // Service doesn't exist. So create it and add to the port |
| vs := NewVoltService(&cfg) |
| if oper != nil { |
| vs.UsHSIAFlowsApplied = oper.UsHSIAFlowsApplied |
| vs.DsHSIAFlowsApplied = oper.DsHSIAFlowsApplied |
| vs.Ipv4Addr = oper.Ipv4Addr |
| vs.Ipv6Addr = oper.Ipv6Addr |
| vs.MacLearning = cfg.MacLearning |
| vs.PendingFlows = oper.PendingFlows |
| vs.AssociatedFlows = oper.AssociatedFlows |
| vs.DeleteInProgress = oper.DeleteInProgress |
| vs.DeactivateInProgress = oper.DeactivateInProgress |
| vs.BwAvailInfo = oper.BwAvailInfo |
| vs.Device = oper.Device |
| } else { |
| // Sorting Pbit from highest |
| sort.Slice(vs.Pbits, func(i, j int) bool { |
| return vs.Pbits[i] > vs.Pbits[j] |
| }) |
| logger.Infow(ctx, "Sorted Pbits", log.Fields{"Pbits": vs.Pbits}) |
| } |
| logger.Infow(ctx, "VolthService...", log.Fields{"vs": vs.Name}) |
| |
| // The bandwidth and shaper profile combined into meter |
| if mmDs, err = va.GetMeter(cfg.DsMeterProfile); err == nil { |
| vs.DsMeterID = mmDs.ID |
| } else { |
| return errors.New("DownStream meter profile not found") |
| } |
| |
| // The aggregated downstream meter profile |
| // if mmAg, err = va.GetMeter(cfg.AggDsMeterProfile); err == nil { |
| // vs.AggDsMeterID = mmAg.ID |
| // } else { |
| // return errors.New("Aggregated meter profile not found") |
| // } |
| |
| // if cfg.AggDsMeterProfile == cfg.UsMeterProfile { |
| // vs.UsMeterID = mmAg.ID |
| // } else { |
| // The bandwidth and shaper profile combined into meter |
| if mmUs, err = va.GetMeter(cfg.UsMeterProfile); err == nil { |
| vs.UsMeterID = mmUs.ID |
| } else { |
| return errors.New("Upstream meter profile not found") |
| } |
| //} |
| |
| AppMutex.ServiceDataMutex.Lock() |
| defer AppMutex.ServiceDataMutex.Unlock() |
| |
| // Add the service to the VNET |
| vnet := va.GetVnet(cfg.SVlan, cfg.CVlan, cfg.UniVlan) |
| if vnet != nil { |
| if vpv := va.GetVnetByPort(vs.Port, cfg.SVlan, cfg.CVlan, cfg.UniVlan); vpv != nil { |
| vpv.VpvLock.Lock() |
| vpv.AddSvc(cntx, vs) |
| vpv.VpvLock.Unlock() |
| } else { |
| va.AddVnetToPort(cntx, vs.Port, vnet, vs) |
| } |
| } else { |
| logger.Errorw(ctx, "VNET-does-not-exist-for-service", log.Fields{"ServiceName": cfg.Name}) |
| return errors.New("VNET doesn't exist") |
| } |
| |
| // If the device is already discovered, update the device name in service |
| d, err := va.GetDeviceFromPort(vs.Port) |
| if err == nil { |
| vs.Device = d.Name |
| } |
| |
| vs.Version = database.PresentVersionMap[database.ServicePath] |
| // Add the service to the volt application |
| va.ServiceByName.Store(vs.Name, vs) |
| vs.WriteToDb(cntx) |
| |
| if nil == oper { |
| if !vs.UsHSIAFlowsApplied { |
| vs.triggerServiceInProgressInd() |
| } |
| |
| // Update meter profiles service count if service is being added from northbound |
| mmDs.AssociatedServices++ |
| va.UpdateMeterProf(cntx, *mmDs) |
| if mmUs != nil { |
| mmUs.AssociatedServices++ |
| va.UpdateMeterProf(cntx, *mmUs) |
| } |
| //mmAg.AssociatedServices++ |
| //va.UpdateMeterProf(*mmAg) |
| logger.Debugw(ctx, "northbound-service-add-successful", log.Fields{"ServiceName": vs.Name}) |
| } |
| |
| logger.Warnw(ctx, "Added Service to DB", log.Fields{"Name": vs.Name, "Port": (vs.Port), "ML": vs.MacLearning}) |
| return nil |
| } |
| |
| // DelServiceWithPrefix - Deletes service with the provided prefix. |
| // Added for DT/TT usecase with sadis replica interface |
| func (va *VoltApplication) DelServiceWithPrefix(cntx context.Context, prefix string) error { |
| var isServiceExist bool |
| va.ServiceByName.Range(func(key, value interface{}) bool { |
| srvName := key.(string) |
| vs := value.(*VoltService) |
| if strings.Contains(srvName, prefix) { |
| isServiceExist = true |
| va.DelService(cntx, srvName, true, nil, false) |
| |
| vnetName := strconv.FormatUint(uint64(vs.SVlan), 10) + "-" |
| vnetName = vnetName + strconv.FormatUint(uint64(vs.CVlan), 10) + "-" |
| vnetName = vnetName + strconv.FormatUint(uint64(vs.UniVlan), 10) |
| |
| if err := va.DelVnet(cntx, vnetName, ""); err != nil { |
| logger.Warnw(ctx, "Delete Vnet Failed", log.Fields{"Name": vnetName, "Error": err}) |
| } |
| } |
| return true |
| }) |
| |
| if !isServiceExist { |
| return errorCodes.ErrServiceNotFound |
| } |
| return nil |
| } |
| |
| // DelService delete a service form the application |
| func (va *VoltApplication) DelService(cntx context.Context, name string, forceDelete bool, newSvc *VoltServiceCfg, serviceMigration bool) { |
| AppMutex.ServiceDataMutex.Lock() |
| defer AppMutex.ServiceDataMutex.Unlock() |
| |
| logger.Warnw(ctx, "Delete Service Request", log.Fields{"Service": name, "ForceDelete": forceDelete, "serviceMigration": serviceMigration}) |
| var noFlowsPresent bool |
| |
| vsIntf, ok := va.ServiceByName.Load(name) |
| if !ok { |
| logger.Warnw(ctx, "Service doesn't exist", log.Fields{"ServiceName": name}) |
| return |
| } |
| vs := vsIntf.(*VoltService) |
| vpv := va.GetVnetByPort(vs.Port, vs.SVlan, vs.CVlan, vs.UniVlan) |
| if vpv == nil { |
| logger.Errorw(ctx, "Vpv Not found for Service", log.Fields{"vs": vs.Name}) |
| return |
| } |
| |
| // Set this to avoid race-condition during flow result processing |
| vs.DeleteInProgress = true |
| vs.ForceDelete = forceDelete |
| vs.ForceWriteToDb(cntx) |
| |
| if len(vs.AssociatedFlows) == 0 { |
| noFlowsPresent = true |
| } |
| vpv.VpvLock.Lock() |
| defer vpv.VpvLock.Unlock() |
| |
| vs.DelHsiaFlows(cntx) |
| |
| if vpv.IgmpEnabled { |
| va.ReceiverDownInd(cntx, vpv.Device, vpv.Port) |
| } |
| logger.Infow(ctx, "Delete Service from VPV", log.Fields{"VPV_Port": vpv.Port, "VPV_SVlan": vpv.SVlan, "VPV_CVlan": vpv.CVlan, "VPV_UniVlan": vpv.UniVlan, "ServiceName": name}) |
| vpv.DelService(cntx, vs) |
| if vpv.servicesCount.Load() == 0 { |
| va.DelVnetFromPort(cntx, vs.Port, vpv) |
| } |
| |
| // Delete the service immediately in case of Force Delete |
| // This will be enabled when profile reconciliation happens after restore |
| // of backedup data |
| if vs.ForceDelete { |
| vs.DelFromDb(cntx) |
| GetApplication().ServiceByName.Delete(vs.Name) |
| logger.Warnw(ctx, "Deleted service from DB/Cache successfully", log.Fields{"serviceName": vs.Name}) |
| } |
| |
| if nil != newSvc { |
| logger.Infow(ctx, "Old Service meter profiles", log.Fields{"AGG": vs.AggDsMeterProfile, "DS": vs.DsMeterProfile, "US": vs.UsMeterProfile}) |
| logger.Infow(ctx, "New Service meter profiles", log.Fields{"AGG": newSvc.AggDsMeterProfile, "DS": newSvc.DsMeterProfile, "US": newSvc.UsMeterProfile}) |
| } |
| |
| logger.Infow(ctx, "About to mark meter for deletion\n", log.Fields{"serviceName": vs.Name}) |
| |
| if aggMeter, ok := va.MeterMgr.GetMeterByID(vs.AggDsMeterID); ok { |
| if nil == newSvc || (nil != newSvc && aggMeter.Name != newSvc.AggDsMeterProfile) { |
| if aggMeter.AssociatedServices > 0 { |
| aggMeter.AssociatedServices-- |
| logger.Infow(ctx, "Agg Meter associated services updated\n", log.Fields{"MeterID": aggMeter}) |
| va.UpdateMeterProf(cntx, *aggMeter) |
| } |
| } |
| } |
| if dsMeter, ok := va.MeterMgr.GetMeterByID(vs.DsMeterID); ok { |
| if nil == newSvc || (nil != newSvc && dsMeter.Name != newSvc.DsMeterProfile) { |
| if dsMeter.AssociatedServices > 0 { |
| dsMeter.AssociatedServices-- |
| logger.Infow(ctx, "DS Meter associated services updated\n", log.Fields{"MeterID": dsMeter}) |
| va.UpdateMeterProf(cntx, *dsMeter) |
| } |
| } |
| } |
| if vs.AggDsMeterID != vs.UsMeterID { |
| if usMeter, ok := va.MeterMgr.GetMeterByID(vs.UsMeterID); ok { |
| if nil == newSvc || (nil != newSvc && usMeter.Name != newSvc.UsMeterProfile) { |
| if usMeter.AssociatedServices > 0 { |
| usMeter.AssociatedServices-- |
| logger.Infow(ctx, "US Meter associated services updated\n", log.Fields{"MeterID": usMeter}) |
| va.UpdateMeterProf(cntx, *usMeter) |
| } |
| } |
| } |
| } |
| |
| if noFlowsPresent || vs.ForceDelete { |
| vs.CheckAndDeleteService(cntx) |
| } |
| |
| // Delete the per service counter too |
| va.ServiceCounters.Delete(name) |
| if vs.IgmpEnabled && vs.EnableMulticastKPI { |
| _ = db.DelAllServiceChannelCounter(cntx, name) |
| } |
| } |
| |
| // AddFlows - Adds the flow to the service |
| // Triggers flow addition after registering for flow indication event |
| func (vs *VoltService) AddFlows(cntx context.Context, device *VoltDevice, flow *of.VoltFlow) error { |
| // Using locks instead of concurrent map for PendingFlows to avoid |
| // race condition during flow response indication processing |
| vs.ServiceLock.Lock() |
| defer vs.ServiceLock.Unlock() |
| |
| for cookie := range flow.SubFlows { |
| cookie := strconv.FormatUint(cookie, 10) |
| fe := &FlowEvent{ |
| eType: EventTypeServiceFlowAdded, |
| device: device.Name, |
| cookie: cookie, |
| eventData: vs, |
| } |
| device.RegisterFlowAddEvent(cookie, fe) |
| vs.PendingFlows[cookie] = true |
| } |
| return cntlr.GetController().AddFlows(cntx, vs.Port, device.Name, flow) |
| } |
| |
| // FlowInstallSuccess - Called when corresponding service flow installation is success |
| // If no more pending flows, HSIA indication wil be triggered |
| func (vs *VoltService) FlowInstallSuccess(cntx context.Context, cookie string, bwAvailInfo of.BwAvailDetails) { |
| if vs.DeleteInProgress { |
| logger.Warnw(ctx, "Skipping Flow Add Success Notification. Service deletion in-progress", log.Fields{"Cookie": cookie, "Service": vs.Name}) |
| return |
| } |
| vs.ServiceLock.Lock() |
| |
| if _, ok := vs.PendingFlows[cookie]; !ok { |
| logger.Errorw(ctx, "Flow Add Success for unknown Cookie", log.Fields{"Service": vs.Name, "Cookie": cookie}) |
| vs.ServiceLock.Unlock() |
| return |
| } |
| |
| delete(vs.PendingFlows, cookie) |
| vs.AssociatedFlows[cookie] = true |
| vs.ServiceLock.Unlock() |
| var prevBwAvail, presentBwAvail string |
| if bwAvailInfo.PrevBw != "" && bwAvailInfo.PresentBw != "" { |
| prevBwAvail = bwAvailInfo.PrevBw |
| presentBwAvail = bwAvailInfo.PresentBw |
| vs.BwAvailInfo = prevBwAvail + "," + presentBwAvail |
| logger.Debugw(ctx, "Bandwidth-value-formed", log.Fields{"BwAvailInfo": vs.BwAvailInfo}) |
| } |
| vs.WriteToDb(cntx) |
| |
| if len(vs.PendingFlows) == 0 && vs.DsHSIAFlowsApplied { |
| device, err := GetApplication().GetDeviceFromPort(vs.Port) |
| if err != nil { |
| logger.Errorw(ctx, "Error Getting Device. Dropping HSIA Success indication to NB", log.Fields{"Reason": err.Error(), "Service": vs.Name, "Port": vs.Port}) |
| return |
| } else if device.State != controller.DeviceStateUP { |
| logger.Warnw(ctx, "Device state Down. Dropping HSIA Success indication to NB", log.Fields{"Service": vs.Name, "Port": vs.Port}) |
| return |
| } |
| |
| if vs.Trigger == ServiceVlanUpdate { |
| vs.Trigger = NBActivate |
| defer vs.WriteToDb(cntx) |
| } |
| logger.Infow(ctx, "All Flows installed for Service", log.Fields{"Service": vs.Name}) |
| return |
| } |
| logger.Infow(ctx, "Processed Service Flow Add Success Indication", log.Fields{"Cookie": cookie, "Service": vs.Name, "DsFlowsApplied": vs.DsHSIAFlowsApplied}) |
| } |
| |
| // FlowInstallFailure - Called when corresponding service flow installation is failed |
| // Trigger service failure indication to NB |
| func (vs *VoltService) FlowInstallFailure(cookie string, errorCode uint32, errReason string) { |
| vs.ServiceLock.RLock() |
| |
| if _, ok := vs.PendingFlows[cookie]; !ok { |
| logger.Errorw(ctx, "Flow Add Failure for unknown Cookie", log.Fields{"Service": vs.Name, "Cookie": cookie}) |
| vs.ServiceLock.RUnlock() |
| return |
| } |
| vs.ServiceLock.RUnlock() |
| logger.Errorw(ctx, "HSIA Flow Add Failure Notification", log.Fields{"uniPort": vs.Port, "Cookie": cookie, "Service": vs.Name, "ErrorCode": errorCode, "ErrorReason": errReason}) |
| vs.triggerServiceFailureInd(errorCode, errReason) |
| } |
| |
| // DelFlows - Deletes the flow from the service |
| // Triggers flow deletion after registering for flow indication event |
| func (vs *VoltService) DelFlows(cntx context.Context, device *VoltDevice, flow *of.VoltFlow) error { |
| if !vs.ForceDelete { |
| // Using locks instead of concurrent map for AssociatedFlows to avoid |
| // race condition during flow response indication processing |
| vs.ServiceLock.Lock() |
| defer vs.ServiceLock.Unlock() |
| |
| for cookie := range flow.SubFlows { |
| cookie := strconv.FormatUint(cookie, 10) |
| fe := &FlowEvent{ |
| eType: EventTypeServiceFlowRemoved, |
| cookie: cookie, |
| eventData: vs, |
| } |
| device.RegisterFlowDelEvent(cookie, fe) |
| } |
| } |
| return cntlr.GetController().DelFlows(cntx, vs.Port, device.Name, flow) |
| } |
| |
| // CheckAndDeleteService - remove service from DB is there are no pending flows to be removed |
| func (vs *VoltService) CheckAndDeleteService(cntx context.Context) { |
| if vs.DeleteInProgress && len(vs.AssociatedFlows) == 0 && !vs.DsHSIAFlowsApplied { |
| vs.DelFromDb(cntx) |
| GetApplication().ServiceByName.Delete(vs.Name) |
| logger.Warnw(ctx, "Deleted service from DB/Cache successfully", log.Fields{"serviceName": vs.Name}) |
| } |
| } |
| |
| // FlowRemoveSuccess - Called when corresponding service flow removal is success |
| // If no more associated flows, DelHSIA indication wil be triggered |
| func (vs *VoltService) FlowRemoveSuccess(cntx context.Context, cookie string) { |
| // if vs.DeleteInProgress { |
| // logger.Warnw(ctx, "Skipping Flow Remove Success Notification. Service deletion in-progress", log.Fields{"Cookie": cookie, "Service": vs.Name}) |
| // return |
| // } |
| vs.ServiceLock.Lock() |
| logger.Infow(ctx, "Processing Service Flow Remove Success Indication", log.Fields{"Cookie": cookie, "Service": vs.Name, "Associated Flows": vs.AssociatedFlows, "DsFlowsApplied": vs.DsHSIAFlowsApplied}) |
| |
| if _, ok := vs.AssociatedFlows[cookie]; ok { |
| delete(vs.AssociatedFlows, cookie) |
| } else if _, ok := vs.PendingFlows[cookie]; ok { |
| logger.Errorw(ctx, "Service Flow Remove: Cookie Present in Pending Flow list. No Action", log.Fields{"Service": vs.Name, "Cookie": cookie, "AssociatedFlows": vs.AssociatedFlows, "PendingFlows": vs.PendingFlows}) |
| } else { |
| logger.Errorw(ctx, "Service Flow Remove Success for unknown Cookie", log.Fields{"Service": vs.Name, "Cookie": cookie, "AssociatedFlows": vs.AssociatedFlows, "PendingFlows": vs.PendingFlows}) |
| } |
| |
| vs.ServiceLock.Unlock() |
| |
| vs.WriteToDb(cntx) |
| |
| if len(vs.AssociatedFlows) == 0 && !vs.DsHSIAFlowsApplied { |
| device := GetApplication().GetDevice(vs.Device) |
| if device == nil { |
| logger.Errorw(ctx, "Error Getting Device. Dropping DEL_HSIA Success indication to NB", log.Fields{"Service": vs.Name, "Port": vs.Port}) |
| return |
| } else if device.State != controller.DeviceStateUP { |
| logger.Warnw(ctx, "Device state Down. Dropping DEL_HSIA Success indication to NB", log.Fields{"Service": vs.Name, "Port": vs.Port}) |
| return |
| } |
| |
| if vs.UpdateInProgress { |
| vs.updateVnetProfile(cntx, vs.Device) |
| // Not sending DEL_HSIA Indication since it wil be generated internally by SubMgr |
| return |
| } |
| logger.Infow(ctx, "All Flows removed for Service. Triggering Service De-activation Success indication to NB", log.Fields{"Service": vs.Name, "DeleteFlag": vs.DeleteInProgress}) |
| vs.CheckAndDeleteService(cntx) |
| |
| return |
| } |
| logger.Infow(ctx, "Processed Service Flow Remove Success Indication", log.Fields{"Cookie": cookie, "Service": vs.Name, "Associated Flows": vs.AssociatedFlows, "DsFlowsApplied": vs.DsHSIAFlowsApplied}) |
| } |
| |
| // FlowRemoveFailure - Called when corresponding service flow installation is failed |
| // Trigger service failure indication to NB |
| func (vs *VoltService) FlowRemoveFailure(cntx context.Context, cookie string, errorCode uint32, errReason string) { |
| vs.ServiceLock.RLock() |
| |
| if _, ok := vs.AssociatedFlows[cookie]; !ok { |
| logger.Errorw(ctx, "Flow Failure for unknown Cookie", log.Fields{"Service": vs.Name, "Cookie": cookie}) |
| vs.ServiceLock.RUnlock() |
| return |
| } |
| if vs.DeleteInProgress { |
| delete(vs.AssociatedFlows, cookie) |
| } |
| vs.ServiceLock.RUnlock() |
| logger.Errorw(ctx, "Service Flow Remove Failure Notification", log.Fields{"uniPort": vs.Port, "Cookie": cookie, "Service": vs.Name, "ErrorCode": errorCode, "ErrorReason": errReason}) |
| |
| vs.triggerServiceFailureInd(errorCode, errReason) |
| vs.CheckAndDeleteService(cntx) |
| } |
| |
| func (vs *VoltService) triggerServiceFailureInd(errorCode uint32, errReason string) { |
| device, err := GetApplication().GetDeviceFromPort(vs.Port) |
| if err != nil { |
| logger.Errorw(ctx, "Error Getting Device. Dropping DEL_HSIA Failure indication to NB", log.Fields{"Reason": err.Error(), "Service": vs.Name, "Port": vs.Port}) |
| return |
| } else if device.State != controller.DeviceStateUP { |
| logger.Warnw(ctx, "Device state Down. Dropping DEL_HSIA Failure indication to NB", log.Fields{"Service": vs.Name, "Port": vs.Port}) |
| return |
| } |
| } |
| |
| // RestoreSvcsFromDb read from the DB and restore all the services |
| func (va *VoltApplication) RestoreSvcsFromDb(cntx context.Context) { |
| // VNETS must be learnt first |
| vss, _ := db.GetServices(cntx) |
| for _, vs := range vss { |
| b, ok := vs.Value.([]byte) |
| if !ok { |
| logger.Warn(ctx, "The value type is not []byte") |
| continue |
| } |
| var vvs VoltService |
| err := json.Unmarshal(b, &vvs) |
| if err != nil { |
| logger.Warn(ctx, "Unmarshal of VNET failed") |
| continue |
| } |
| logger.Debugw(ctx, "Retrieved Service", log.Fields{"Service": vvs.VoltServiceCfg}) |
| if err := va.AddService(cntx, vvs.VoltServiceCfg, &vvs.VoltServiceOper); err != nil { |
| logger.Warnw(ctx, "Add New Service Failed", log.Fields{"Service": vvs.Name, "Error": err}) |
| } |
| |
| if vvs.VoltServiceOper.DeactivateInProgress { |
| va.ServicesToDeactivate[vvs.VoltServiceCfg.Name] = true |
| logger.Warnw(ctx, "Service (restored) to be deactivated", log.Fields{"Service": vvs.Name}) |
| } |
| |
| if vvs.VoltServiceOper.DeleteInProgress { |
| va.ServicesToDelete[vvs.VoltServiceCfg.Name] = true |
| logger.Warnw(ctx, "Service (restored) to be deleted", log.Fields{"Service": vvs.Name}) |
| } |
| } |
| } |
| |
| // GetService to get service |
| func (va *VoltApplication) GetService(name string) *VoltService { |
| if vs, ok := va.ServiceByName.Load(name); ok { |
| return vs.(*VoltService) |
| } |
| return nil |
| } |
| |
| // GetCircuitID to get circuit id |
| func (vs *VoltService) GetCircuitID() []byte { |
| return []byte(vs.CircuitID) |
| } |
| |
| // GetRemoteID to get remote id |
| func (vs *VoltService) GetRemoteID() []byte { |
| return []byte(vs.RemoteID) |
| } |
| |
| // IPAssigned to check if ip is assigned |
| func (vs *VoltService) IPAssigned() bool { |
| if vs.Ipv4Addr != nil && !vs.Ipv4Addr.Equal(net.ParseIP("0.0.0.0")) { |
| return true |
| } else if vs.Ipv6Addr != nil && !vs.Ipv6Addr.Equal(net.ParseIP("0:0:0:0:0:0:0:0")) { |
| return true |
| } |
| return false |
| } |
| |
| // GetServiceNameFromCookie to get service name from cookie |
| func (va *VoltApplication) GetServiceNameFromCookie(cookie uint64, portName string, pbit uint8, device string, tableMetadata uint64) *VoltService { |
| var vlan uint64 |
| vlanControl := (tableMetadata >> 32) & 0xF |
| |
| if vlanControl == uint64(OLTCVlanOLTSVlan) { |
| // Fetching UniVlan for vlanControl OLTCVLANOLTSVLAN |
| vlan = (tableMetadata >> 16) & 0xFFFF |
| } else { |
| // Fetching CVlan for other vlanControl |
| vlan = cookie >> 52 |
| } |
| logger.Infow(ctx, "Configured Params", log.Fields{"VlanControl": vlanControl, "vlan": vlan}) |
| var vlans []of.VlanType |
| vlans = append(vlans, of.VlanType(vlan)) |
| service := GetApplication().GetServiceFromCvlan(device, portName, vlans, uint8(pbit)) |
| if nil != service { |
| logger.Infow(ctx, "Service Found for", log.Fields{"serviceName": service.Name, "portName": portName, "ctag": vlan}) |
| } else { |
| logger.Errorw(ctx, "No Service for", log.Fields{"portName": portName, "ctag": vlan, "Pbit": pbit, "device": device, "VlanControl": vlanControl}) |
| } |
| return service |
| } |
| |
| // MigrateServicesReqStatus - update vnet request status |
| type MigrateServicesReqStatus string |
| |
| const ( |
| // MigrateSrvsReqInit constant |
| MigrateSrvsReqInit MigrateServicesReqStatus = "Init" |
| // MigrateSrvsReqDeactTriggered constant |
| MigrateSrvsReqDeactTriggered MigrateServicesReqStatus = "Profiles Deactivated" |
| // MigrateSrvsReqCompleted constant |
| MigrateSrvsReqCompleted MigrateServicesReqStatus = "Update Complete" |
| ) |
| |
| // MigrateServicesRequest - update vnet request params |
| type MigrateServicesRequest struct { |
| ID string |
| OldVnetID string |
| NewVnetID string |
| ServicesList map[string]bool |
| DeviceID string |
| Status MigrateServicesReqStatus |
| MigrateServicesLock sync.RWMutex |
| } |
| |
| func newMigrateServicesRequest(id string, oldVnetID string, newVnetID string, serviceMap map[string]bool, deviceID string) *MigrateServicesRequest { |
| var msr MigrateServicesRequest |
| msr.OldVnetID = oldVnetID |
| msr.NewVnetID = newVnetID |
| msr.ID = id |
| msr.ServicesList = serviceMap |
| msr.DeviceID = deviceID |
| msr.Status = MigrateSrvsReqInit |
| return &msr |
| } |
| |
| // GetMsrKey - generates migrate service request key |
| func (msr *MigrateServicesRequest) GetMsrKey() string { |
| return msr.OldVnetID + "-" + msr.ID |
| } |
| |
| // //isRequestComplete - return if all request has been processed and completed |
| // // RequestProcessed indicates that all the profile de-activation has been triggered |
| // // And the associated profiles indicates the profiles awaiting results |
| // func (msr *MigrateServicesRequest) isRequestComplete() bool { |
| // //return edr.RequestProcessed && (len(edr.AssociatedProfiles) == 0) |
| // return (len(edr.AssociatedProfiles) == 0) |
| // } |
| |
| // WriteToDB - writes the udpate vnet request details ot DB |
| func (msr *MigrateServicesRequest) WriteToDB(cntx context.Context) { |
| logger.Debugw(ctx, "Adding Migrate Service Request to DB", log.Fields{"OldVnet": msr.OldVnetID, "NewVnet": msr.NewVnetID, "Device": msr.DeviceID, "RequestID": msr.ID, "ServiceCount": len(msr.ServicesList)}) |
| if b, err := json.Marshal(msr); err == nil { |
| if err = db.PutMigrateServicesReq(cntx, msr.DeviceID, msr.GetMsrKey(), string(b)); err != nil { |
| logger.Warnw(ctx, "PutMigrateServicesReq Failed", log.Fields{"OldVnet": msr.OldVnetID, "NewVnet": msr.NewVnetID, |
| "Device": msr.DeviceID, "Error": err}) |
| } |
| } |
| } |
| |
| // MigrateServices - updated vnet profile for services |
| func (va *VoltApplication) MigrateServices(cntx context.Context, serialNum string, reqID string, oldVnetID, newVnetID string, serviceList []string) error { |
| logger.Warnw(ctx, "Migrate Serviec Request Received", log.Fields{"SerialNum": serialNum, "RequestID": reqID, "OldVnet": oldVnetID, "NewVnet": newVnetID, "ServiceList": serviceList}) |
| if _, ok := va.VnetsByName.Load(oldVnetID); !ok { |
| return errors.New("Old Vnet Id not found") |
| } |
| if _, ok := va.VnetsByName.Load(newVnetID); !ok { |
| return errors.New("New Vnet Id not found") |
| } |
| |
| d, _ := va.GetDeviceBySerialNo(serialNum) |
| if d == nil { |
| logger.Errorw(ctx, "Error Getting Device", log.Fields{"SerialNum": serialNum}) |
| return errorCodes.ErrDeviceNotFound |
| } |
| |
| serviceMap := make(map[string]bool) |
| |
| for _, service := range serviceList { |
| serviceMap[service] = false |
| } |
| msr := newMigrateServicesRequest(reqID, oldVnetID, newVnetID, serviceMap, d.Name) |
| msr.WriteToDB(cntx) |
| |
| d.AddMigratingServices(msr) |
| go msr.ProcessMigrateServicesProfRequest(cntx) |
| return nil |
| } |
| |
| // ProcessMigrateServicesProfRequest - collects all associated profiles |
| func (msr *MigrateServicesRequest) ProcessMigrateServicesProfRequest(cntx context.Context) { |
| va := GetApplication() |
| for srv, processed := range msr.ServicesList { |
| // Indicates new service is already created and only deletion of old one is pending |
| if processed { |
| va.DelService(cntx, srv, true, nil, true) |
| msr.serviceMigrated(cntx, srv) |
| continue |
| } |
| |
| logger.Infow(ctx, "Migrate Service Triggering", log.Fields{"Service": srv}) |
| if vsIntf, ok := va.ServiceByName.Load(srv); ok { |
| vs := vsIntf.(*VoltService) |
| vpv := va.GetVnetByPort(vs.Port, vs.SVlan, vs.CVlan, vs.UniVlan) |
| if vpv == nil { |
| logger.Errorw(ctx, "Vpv Not found for Service", log.Fields{"vs": vs.Name, "port": vs.Port, "Vnet": vs.VnetID}) |
| continue |
| } |
| logger.Infow(ctx, "Migrating Service", log.Fields{"Service": vs.Name, "UsFlowApplied": vs.UsHSIAFlowsApplied}) |
| vpv.Blocked = true |
| |
| // setDeactTrigger := func(key, value interface{}) bool { |
| // vs := value.(*VoltService) |
| vs.ServiceLock.Lock() |
| vs.UpdateInProgress = true |
| metadata := &MigrateServiceMetadata{ |
| NewVnetID: msr.NewVnetID, |
| RequestID: msr.ID, |
| } |
| vs.Metadata = metadata |
| vs.ServiceLock.Unlock() |
| |
| // vpv flows will be removed when last service is removed from it and |
| // new vpv flows will be installed when new service is added |
| if vs.UsHSIAFlowsApplied { |
| vpv.DelTrapFlows(cntx) |
| vs.DelHsiaFlows(cntx) |
| logger.Infow(ctx, "Remove Service Flows Triggered", log.Fields{"Service": srv, "US": vs.UsHSIAFlowsApplied, "DS": vs.DsHSIAFlowsApplied}) |
| } else { |
| vs.updateVnetProfile(cntx, msr.DeviceID) |
| } |
| } else { |
| logger.Warnw(ctx, "Migrate Service Failed: Service Not Found", log.Fields{"Service": srv, "Vnet": msr.OldVnetID}) |
| } |
| } |
| } |
| |
| // AddMigratingServices - store msr info to device obj |
| func (d *VoltDevice) AddMigratingServices(msr *MigrateServicesRequest) { |
| var msrMap *util.ConcurrentMap |
| if msrMapIntf, ok := d.MigratingServices.Get(msr.OldVnetID); !ok { |
| msrMap = util.NewConcurrentMap() |
| } else { |
| msrMap = msrMapIntf.(*util.ConcurrentMap) |
| } |
| |
| msrMap.Set(msr.ID, msr) |
| logger.Infow(ctx, "1: MsrListLen", log.Fields{"Len": msrMap.Length(), "Vnet": msr.OldVnetID}) |
| |
| d.MigratingServices.Set(msr.OldVnetID, msrMap) |
| logger.Infow(ctx, "1: DeviceMsr", log.Fields{"Device": d.Name, "Vnet": msr.OldVnetID, "Len": d.MigratingServices.Length()}) |
| } |
| |
| // getMigrateServicesRequest - fetches msr info from device |
| func (va *VoltApplication) getMigrateServicesRequest(deviceID string, oldVnetID string, requestID string) *MigrateServicesRequest { |
| if vd := va.GetDevice(deviceID); vd != nil { |
| logger.Infow(ctx, "2: DeviceMsr", log.Fields{"Device": deviceID, "Vnet": oldVnetID, "Len": vd.MigratingServices.Length()}) |
| if msrListIntf, ok := vd.MigratingServices.Get(oldVnetID); ok { |
| msrList := msrListIntf.(*util.ConcurrentMap) |
| logger.Infow(ctx, "2: MsrListLen", log.Fields{"Len": msrList.Length(), "Vnet": oldVnetID}) |
| if msrObj, ok := msrList.Get(requestID); ok { |
| return msrObj.(*MigrateServicesRequest) |
| } |
| } |
| } |
| logger.Errorw(ctx, "Device Not Found", log.Fields{"Device": deviceID}) |
| return nil |
| } |
| |
| // updateMigrateServicesRequest - Updates the device with updated msr |
| func (va *VoltApplication) updateMigrateServicesRequest(deviceID string, oldVnetID string, requestID string, msr *MigrateServicesRequest) { |
| if vd := va.GetDevice(deviceID); vd != nil { |
| if msrList, ok := vd.MigratingServices.Get(oldVnetID); ok { |
| if _, ok := msrList.(*util.ConcurrentMap).Get(requestID); ok { |
| msrList.(*util.ConcurrentMap).Set(requestID, msr) |
| } |
| } |
| } |
| } |
| |
| // updateVnetProfile - Called on flow process completion |
| // Removes old service and creates new VPV & service with updated vnet profile |
| func (vs *VoltService) updateVnetProfile(cntx context.Context, deviceID string) { |
| logger.Infow(ctx, "Update Vnet Profile Triggering", log.Fields{"Service": vs.Name, "US": vs.UsHSIAFlowsApplied, "DS": vs.DsHSIAFlowsApplied}) |
| |
| nvs := VoltService{} |
| nvs.VoltServiceCfg = vs.VoltServiceCfg |
| nvs.Device = vs.Device |
| nvs.Ipv4Addr = vs.Ipv4Addr |
| nvs.Ipv6Addr = vs.Ipv6Addr |
| nvs.UsMeterID = vs.UsMeterID |
| nvs.DsMeterID = vs.DsMeterID |
| nvs.AggDsMeterID = vs.AggDsMeterID |
| nvs.UsHSIAFlowsApplied = vs.UsHSIAFlowsApplied |
| nvs.DsHSIAFlowsApplied = vs.DsHSIAFlowsApplied |
| nvs.UsDhcpFlowsApplied = vs.UsDhcpFlowsApplied |
| nvs.DsDhcpFlowsApplied = vs.DsDhcpFlowsApplied |
| nvs.IgmpFlowsApplied = vs.IgmpFlowsApplied |
| nvs.Icmpv6FlowsApplied = vs.Icmpv6FlowsApplied |
| nvs.PendingFlows = vs.PendingFlows |
| nvs.AssociatedFlows = vs.AssociatedFlows |
| nvs.DeleteInProgress = vs.DeleteInProgress |
| nvs.DeactivateInProgress = vs.DeactivateInProgress |
| nvs.ForceDelete = vs.ForceDelete |
| nvs.BwAvailInfo = vs.BwAvailInfo |
| nvs.UpdateInProgress = vs.UpdateInProgress |
| |
| if nvs.DeleteInProgress { |
| logger.Warnw(ctx, "Skipping Service Migration. Service Delete in Progress", log.Fields{"Device": deviceID, "Service": vs.Name, "Vnet": vs.VnetID}) |
| return |
| } |
| |
| metadata := vs.Metadata.(*MigrateServiceMetadata) |
| oldVnetID := vs.VnetID |
| oldSrvName := vs.Name |
| |
| if metadata == nil || metadata.NewVnetID == "" { |
| logger.Errorw(ctx, "Migrate Service Metadata not found. Dropping vnet profile update request", log.Fields{"Service": vs.Name, "Vnet": vs.VnetID}) |
| return |
| } |
| |
| nvs.VnetID = metadata.NewVnetID |
| id := metadata.RequestID |
| |
| // First add the new service and then only delete the old service |
| // Since if post del service in case of pod crash or reboot, the service data will be lost |
| va := GetApplication() |
| msr := va.getMigrateServicesRequest(deviceID, oldVnetID, id) |
| vnets := strings.Split(metadata.NewVnetID, "-") |
| svlan, _ := strconv.Atoi(vnets[0]) |
| nvs.SVlan = of.VlanType(svlan) |
| nvs.UpdateInProgress = false |
| nvs.Metadata = nil |
| nvs.Trigger = ServiceVlanUpdate |
| |
| svcName := vs.Port + "-" + strconv.FormatUint(uint64(nvs.SVlan), 10) + "-" |
| svcName = svcName + strconv.FormatUint(uint64(vs.CVlan), 10) + "-" |
| nvs.Name = svcName + strconv.FormatUint(uint64(vs.TechProfileID), 10) |
| |
| // TODO:Nav Pass a copy, not the pointer |
| logger.Infow(ctx, "Add New Service Triggering", log.Fields{"Service": nvs.Name, "US": nvs.UsHSIAFlowsApplied, "DS": nvs.DsHSIAFlowsApplied, "DelFlag": nvs.DeleteInProgress}) |
| if err := va.AddService(cntx, nvs.VoltServiceCfg, &nvs.VoltServiceOper); err != nil { |
| logger.Warnw(ctx, "Add New Service Failed", log.Fields{"Service": nvs.Name, "Error": err}) |
| } |
| logger.Infow(ctx, "Add New Service Triggered", log.Fields{"Service": nvs.Name, "US": nvs.UsHSIAFlowsApplied, "DS": nvs.DsHSIAFlowsApplied, "DelFlag": nvs.DeleteInProgress}) |
| |
| msr.ServicesList[oldSrvName] = true |
| va.updateMigrateServicesRequest(deviceID, oldVnetID, id, msr) |
| msr.WriteToDB(cntx) |
| |
| logger.Infow(ctx, "Del Old Service Triggering", log.Fields{"Service": oldSrvName, "US": vs.UsHSIAFlowsApplied, "DS": vs.DsHSIAFlowsApplied, "DelFlag": vs.DeleteInProgress}) |
| va.DelService(cntx, oldSrvName, true, nil, true) |
| logger.Infow(ctx, "Del Old Service Triggered", log.Fields{"Service": oldSrvName, "US": vs.UsHSIAFlowsApplied, "DS": vs.DsHSIAFlowsApplied, "DelFlag": vs.DeleteInProgress}) |
| msr.serviceMigrated(cntx, oldSrvName) |
| } |
| |
| // serviceMigrated - called on successful service updation |
| // Removes the service entry from servicelist and deletes the request on process completion |
| func (msr *MigrateServicesRequest) serviceMigrated(cntx context.Context, serviceName string) { |
| msr.MigrateServicesLock.Lock() |
| defer msr.MigrateServicesLock.Unlock() |
| |
| delete(msr.ServicesList, serviceName) |
| |
| if len(msr.ServicesList) == 0 { |
| _ = db.DelMigrateServicesReq(cntx, msr.DeviceID, msr.GetMsrKey()) |
| return |
| } |
| msr.WriteToDB(cntx) |
| // TODO:Nav - Need for any Response to SubMgr? |
| } |
| |
| // TriggerPendingMigrateServicesReq - trigger pending service request |
| func (va *VoltApplication) TriggerPendingMigrateServicesReq(cntx context.Context, device string) { |
| va.FetchAndProcessAllMigrateServicesReq(cntx, device, storeAndProcessMigrateSrvRequest) |
| } |
| |
| // FetchAndProcessAllMigrateServicesReq - fetch all pending migrate services req from DB and process based on provided func |
| func (va *VoltApplication) FetchAndProcessAllMigrateServicesReq(cntx context.Context, device string, msrAction func(context.Context, *MigrateServicesRequest)) { |
| msrList, _ := db.GetAllMigrateServicesReq(cntx, device) |
| for _, msr := range msrList { |
| b, ok := msr.Value.([]byte) |
| if !ok { |
| logger.Warn(ctx, "The value type is not []byte") |
| continue |
| } |
| msr := va.createMigrateServicesFromString(b) |
| msrAction(cntx, msr) |
| logger.Warnw(ctx, "Triggering Pending Migrate Services Req", log.Fields{"OldVnet": msr.OldVnetID, "NewVnet": msr.NewVnetID, "Device": device, "PendingProfiles": len(msr.ServicesList)}) |
| } |
| } |
| |
| // createMigrateServicesFromString to create Service from string |
| func (va *VoltApplication) createMigrateServicesFromString(b []byte) *MigrateServicesRequest { |
| var msr MigrateServicesRequest |
| if err := json.Unmarshal(b, &msr); err == nil { |
| logger.Debugw(ctx, "Adding Migrate Services Request From Db", log.Fields{"Vlan": msr.OldVnetID}) |
| } else { |
| logger.Warn(ctx, "Unmarshal failed") |
| } |
| return &msr |
| } |
| |
| // storeAndProcessMigrateSrvRequest - stores the msr info in device obj and triggers req |
| func storeAndProcessMigrateSrvRequest(cntx context.Context, msr *MigrateServicesRequest) { |
| d := GetApplication().GetDevice(msr.DeviceID) |
| d.AddMigratingServices(msr) |
| msr.ProcessMigrateServicesProfRequest(cntx) |
| } |
| |
| // forceUpdateAllServices - force udpate services with new vnet profile |
| func forceUpdateAllServices(cntx context.Context, msr *MigrateServicesRequest) { |
| for srv := range msr.ServicesList { |
| if vsIntf, ok := GetApplication().ServiceByName.Load(srv); ok { |
| vsIntf.(*VoltService).updateVnetProfile(cntx, msr.DeviceID) |
| } |
| } |
| _ = db.DelMigrateServicesReq(cntx, msr.DeviceID, msr.GetMsrKey()) |
| } |
| |
| // nolint: gocyclo |
| // DeepEqualServicecfg - checks if the given service cfgs are same |
| func (va *VoltApplication) DeepEqualServicecfg(evs *VoltServiceCfg, nvs *VoltServiceCfg) bool { |
| if nvs.Name != evs.Name { |
| return false |
| } |
| if nvs.UniVlan != evs.UniVlan { |
| return false |
| } |
| if nvs.CVlan != evs.CVlan { |
| return false |
| } |
| if nvs.SVlan != evs.SVlan { |
| return false |
| } |
| if nvs.SVlanTpid != 0 && nvs.SVlanTpid != evs.SVlanTpid { |
| return false |
| } |
| if !util.IsPbitSliceSame(nvs.Pbits, evs.Pbits) { |
| return false |
| } |
| if !reflect.DeepEqual(nvs.DsRemarkPbitsMap, evs.DsRemarkPbitsMap) { |
| return false |
| } |
| if nvs.TechProfileID != evs.TechProfileID { |
| return false |
| } |
| if nvs.CircuitID != evs.CircuitID { |
| return false |
| } |
| if !bytes.Equal(nvs.RemoteID, evs.RemoteID) { |
| return false |
| } |
| if nvs.Port != evs.Port { |
| return false |
| } |
| if nvs.PonPort != evs.PonPort { |
| return false |
| } |
| if evs.MacLearning == MacLearningNone && !util.MacAddrsMatch(nvs.MacAddr, evs.MacAddr) { |
| return false |
| } |
| if nvs.IsOption82Enabled != evs.IsOption82Enabled { |
| return false |
| } |
| if nvs.IgmpEnabled != evs.IgmpEnabled { |
| return false |
| } |
| if nvs.McastService != evs.McastService { |
| return false |
| } |
| if nvs.ONTEtherTypeClassification != evs.ONTEtherTypeClassification { |
| return false |
| } |
| if nvs.UsMeterProfile != evs.UsMeterProfile { |
| return false |
| } |
| if nvs.DsMeterProfile != evs.DsMeterProfile { |
| return false |
| } |
| if nvs.AggDsMeterProfile != evs.AggDsMeterProfile { |
| return false |
| } |
| if nvs.VnetID != evs.VnetID { |
| return false |
| } |
| if nvs.MvlanProfileName != evs.MvlanProfileName { |
| return false |
| } |
| if nvs.RemoteIDType != evs.RemoteIDType { |
| return false |
| } |
| if nvs.SchedID != evs.SchedID { |
| return false |
| } |
| if nvs.AllowTransparent != evs.AllowTransparent { |
| return false |
| } |
| if nvs.EnableMulticastKPI != evs.EnableMulticastKPI { |
| return false |
| } |
| if nvs.DataRateAttr != evs.DataRateAttr { |
| return false |
| } |
| if nvs.MinDataRateUs != evs.MinDataRateUs { |
| return false |
| } |
| if nvs.MinDataRateDs != evs.MinDataRateDs { |
| return false |
| } |
| if nvs.MaxDataRateUs != evs.MaxDataRateUs { |
| return false |
| } |
| if nvs.MaxDataRateDs != evs.MaxDataRateDs { |
| return false |
| } |
| |
| return true |
| } |
| |
| // TriggerAssociatedFlowDelete - re-trigger service flow delete for pending delete flows |
| func (vs *VoltService) TriggerAssociatedFlowDelete(cntx context.Context) bool { |
| // Clear the Flows flag if already set |
| // This case happens only in case of some race condition |
| if vs.UsHSIAFlowsApplied { |
| if err := vs.DelUsHsiaFlows(cntx); err != nil { |
| logger.Errorw(ctx, "DelUsHsiaFlows Failed", log.Fields{"Device": vs.Device, "Service": vs.Name, "Error": err}) |
| } |
| } |
| |
| if vs.DsHSIAFlowsApplied { |
| if err := vs.DelDsHsiaFlows(cntx); err != nil { |
| logger.Errorw(ctx, "DelDsHsiaFlows Failed", log.Fields{"Device": vs.Device, "Service": vs.Name, "Error": err}) |
| } |
| } |
| |
| vs.ServiceLock.Lock() |
| cookieList := []uint64{} |
| for cookie := range vs.AssociatedFlows { |
| cookieList = append(cookieList, convertToUInt64(cookie)) |
| } |
| vs.ServiceLock.Unlock() |
| |
| if len(cookieList) == 0 { |
| return false |
| } |
| |
| // Trigger Flow Delete |
| for _, cookie := range cookieList { |
| if vd := GetApplication().GetDevice(vs.Device); vd != nil { |
| flow := &of.VoltFlow{} |
| flow.SubFlows = make(map[uint64]*of.VoltSubFlow) |
| subFlow := of.NewVoltSubFlow() |
| subFlow.Cookie = cookie |
| flow.SubFlows[cookie] = subFlow |
| logger.Infow(ctx, "Retriggering Service Delete Flow", log.Fields{"Device": vs.Device, "Service": vs.Name, "Cookie": cookie}) |
| if err := vs.DelFlows(cntx, vd, flow); err != nil { |
| logger.Errorw(ctx, "DelFlows Failed", log.Fields{"Device": vs.Device, "Service": vs.Name, "Cookie": cookie, "Error": err}) |
| } |
| } |
| } |
| return true |
| } |
| |
| // triggerServiceInProgressInd - Indication is generated when Service is not provisioned after add serviec req from NB |
| func (vs *VoltService) triggerServiceInProgressInd() { |
| } |
| |
| // JSONMarshal wrapper function for json Marshal VoltService |
| func (vs *VoltService) JSONMarshal() ([]byte, error) { |
| return json.Marshal(VoltService{ |
| VoltServiceCfg: vs.VoltServiceCfg, |
| VoltServiceOper: VoltServiceOper{ |
| Device: vs.VoltServiceOper.Device, |
| Ipv4Addr: vs.VoltServiceOper.Ipv4Addr, |
| Ipv6Addr: vs.VoltServiceOper.Ipv6Addr, |
| UsMeterID: vs.VoltServiceOper.UsMeterID, |
| DsMeterID: vs.VoltServiceOper.DsMeterID, |
| AggDsMeterID: vs.VoltServiceOper.AggDsMeterID, |
| UsHSIAFlowsApplied: vs.VoltServiceOper.UsHSIAFlowsApplied, |
| DsHSIAFlowsApplied: vs.VoltServiceOper.DsHSIAFlowsApplied, |
| UsDhcpFlowsApplied: vs.VoltServiceOper.UsDhcpFlowsApplied, |
| DsDhcpFlowsApplied: vs.VoltServiceOper.DsDhcpFlowsApplied, |
| IgmpFlowsApplied: vs.VoltServiceOper.IgmpFlowsApplied, |
| Icmpv6FlowsApplied: vs.VoltServiceOper.Icmpv6FlowsApplied, |
| PendingFlows: vs.VoltServiceOper.PendingFlows, |
| AssociatedFlows: vs.VoltServiceOper.AssociatedFlows, |
| DeleteInProgress: vs.VoltServiceOper.DeleteInProgress, |
| DeactivateInProgress: vs.VoltServiceOper.DeactivateInProgress, |
| ForceDelete: vs.VoltServiceOper.ForceDelete, |
| BwAvailInfo: vs.VoltServiceOper.BwAvailInfo, |
| UpdateInProgress: vs.VoltServiceOper.UpdateInProgress, |
| Metadata: vs.VoltServiceOper.Metadata, |
| }, |
| }) |
| } |
| |
| // GetProgrammedSubscribers to get list of programmed subscribers |
| func (va *VoltApplication) GetProgrammedSubscribers(cntx context.Context, deviceID, portNo string) ([]*VoltService, error) { |
| var svcList []*VoltService |
| logger.Infow(ctx, "GetProgrammedSubscribers Request ", log.Fields{"Device": deviceID, "Port": portNo}) |
| va.ServiceByName.Range(func(key, value interface{}) bool { |
| vs := value.(*VoltService) |
| if len(deviceID) > 0 { |
| if len(portNo) > 0 { |
| if deviceID == vs.Device && portNo == vs.Port { |
| svcList = append(svcList, vs) |
| } |
| } else { |
| if deviceID == vs.Device { |
| svcList = append(svcList, vs) |
| } |
| } |
| } else { |
| svcList = append(svcList, vs) |
| } |
| return true |
| }) |
| return svcList, nil |
| } |
| |
| type FlowProvisionStatus struct { |
| FlowProvisionStatus string |
| } |
| |
| // GetFlowProvisionStatus to get status of the subscriber and flow provisioned in controller |
| func (va *VoltApplication) GetFlowProvisionStatus(portNo string) FlowProvisionStatus { |
| logger.Infow(ctx, "GetFlowProvisionStatus Request ", log.Fields{"Port": portNo}) |
| flowProvisionStatus := FlowProvisionStatus{} |
| flowProvisionStatus.FlowProvisionStatus = SUBSCRIBER_NOT_IN_CONTROLLER |
| va.ServiceByName.Range(func(key, value interface{}) bool { |
| vs := value.(*VoltService) |
| logger.Debugw(ctx, "Volt Service ", log.Fields{"VS": vs}) |
| if portNo == vs.Port { |
| if vs.DsHSIAFlowsApplied && vs.UsHSIAFlowsApplied && vs.LenOfPendingFlows() == 0 { |
| flowProvisionStatus.FlowProvisionStatus = ALL_FLOWS_PROVISIONED |
| return false |
| } else if !vs.IsActivated { |
| flowProvisionStatus.FlowProvisionStatus = SUBSCRIBER_DISABLED_IN_CONTROLLER |
| return false |
| } else if !vs.DsHSIAFlowsApplied && !vs.UsHSIAFlowsApplied { |
| flowProvisionStatus.FlowProvisionStatus = NO_FLOWS_PROVISIONED |
| return false |
| } else if vs.LenOfPendingFlows() > 0 { |
| flowProvisionStatus.FlowProvisionStatus = FLOWS_PROVISIONED_PARTIALLY |
| return false |
| } |
| } |
| return true |
| }) |
| return flowProvisionStatus |
| } |
| |
| func (vs *VoltService) LenOfPendingFlows() int { |
| vs.ServiceLock.RLock() |
| lth := len(vs.PendingFlows) |
| vs.ServiceLock.RUnlock() |
| return lth |
| } |
| |
| // ActivateService to activate pre-provisioned service |
| func (va *VoltApplication) ActivateService(cntx context.Context, deviceID, portNo string, sVlan, cVlan of.VlanType, tpID uint16) error { |
| var isParmsInvalid bool |
| logger.Infow(ctx, "Service Activate Request ", log.Fields{"Device": deviceID, "Port": portNo}) |
| device, err := va.GetDeviceFromPort(portNo) |
| if err != nil { |
| logger.Errorw(ctx, "Error Getting Device", log.Fields{"Reason": err.Error(), "Port": portNo}) |
| return errorCodes.ErrPortNotFound |
| } |
| // If device id is not provided check only port number |
| if deviceID == DeviceAny { |
| deviceID = device.Name |
| } else if deviceID != device.Name { |
| logger.Errorw(ctx, "Wrong Device ID", log.Fields{"Device": deviceID, "Port": portNo}) |
| return errorCodes.ErrDeviceNotFound |
| } |
| va.ServiceByName.Range(func(key, value interface{}) bool { |
| vs := value.(*VoltService) |
| // If svlan if provided, then the tags and tpID of service has to be matching |
| if sVlan != of.VlanNone && (sVlan != vs.SVlan || cVlan != vs.CVlan || tpID != vs.TechProfileID) { |
| logger.Infow(ctx, "Service Activate Request Does not match", log.Fields{"Device": deviceID, "voltService": vs}) |
| isParmsInvalid = true |
| return true |
| } |
| if portNo == vs.Port && !vs.IsActivated { |
| isParmsInvalid = false |
| p := device.GetPort(vs.Port) |
| if p == nil { |
| logger.Warnw(ctx, "Wrong device or port", log.Fields{"Device": deviceID, "Port": portNo}) |
| return true |
| } |
| logger.Infow(ctx, "Service Activate", log.Fields{"Name": vs.Name}) |
| vs.IsActivated = true |
| va.ServiceByName.Store(vs.Name, vs) |
| vs.WriteToDb(cntx) |
| // If port is already up send indication to vpv |
| if p.State == PortStateUp { |
| if vpv := va.GetVnetByPort(vs.Port, vs.SVlan, vs.CVlan, vs.UniVlan); vpv != nil { |
| // PortUp call initiates flow addition |
| vpv.PortUpInd(cntx, device, portNo) |
| } else { |
| logger.Warnw(ctx, "VPV does not exists!!!", log.Fields{"Device": deviceID, "port": portNo, "SvcName": vs.Name}) |
| } |
| } |
| } |
| return true |
| }) |
| |
| if isParmsInvalid { |
| return errorCodes.ErrInvalidParamInRequest |
| } |
| return nil |
| } |
| |
| // DeactivateService to activate pre-provisioned service |
| func (va *VoltApplication) DeactivateService(cntx context.Context, deviceID, portNo string, sVlan, cVlan of.VlanType, tpID uint16) error { |
| logger.Infow(ctx, "Service Deactivate Request ", log.Fields{"Device": deviceID, "Port": portNo}) |
| var isServiceExist bool |
| var isParmsInvalid bool |
| |
| va.ServiceByName.Range(func(key, value interface{}) bool { |
| vs := value.(*VoltService) |
| // If svlan if provided, then the tags and tpID of service has to be matching |
| logger.Infow(ctx, "Service Deactivate Request ", log.Fields{"Device": deviceID, "Port": portNo}) |
| if sVlan != of.VlanNone && (sVlan != vs.SVlan || cVlan != vs.CVlan || tpID != vs.TechProfileID) { |
| logger.Infow(ctx, "condition not matched", log.Fields{"Device": deviceID, "Port": portNo, "sVlan": sVlan, "cVlan": cVlan, "tpID": tpID}) |
| isParmsInvalid = true |
| return true |
| } |
| if portNo == vs.Port && vs.IsActivated { |
| isServiceExist = true |
| isParmsInvalid = false |
| vs.IsActivated = false |
| vs.DeactivateInProgress = true |
| va.ServiceByName.Store(vs.Name, vs) |
| vs.WriteToDb(cntx) |
| device, err := va.GetDeviceFromPort(portNo) |
| if err != nil { |
| // Even if the port/device does not exists at this point in time, the deactivate request is succss. |
| // So no error is returned |
| logger.Infow(ctx, "Error Getting Device", log.Fields{"Reason": err.Error(), "Port": portNo}) |
| return true |
| } |
| p := device.GetPort(vs.Port) |
| if p != nil && (p.State == PortStateUp || !va.OltFlowServiceConfig.RemoveFlowsOnDisable) { |
| if vpv := va.GetVnetByPort(vs.Port, vs.SVlan, vs.CVlan, vs.UniVlan); vpv != nil { |
| // Port down call internally deletes all the flows |
| vpv.PortDownInd(cntx, deviceID, portNo, true) |
| if vpv.IgmpEnabled { |
| va.ReceiverDownInd(cntx, deviceID, portNo) |
| } |
| vs.DeactivateInProgress = false |
| } else { |
| logger.Warnw(ctx, "VPV does not exists!!!", log.Fields{"Device": deviceID, "port": portNo, "SvcName": vs.Name}) |
| } |
| } |
| } |
| return true |
| }) |
| |
| if isParmsInvalid { |
| return errorCodes.ErrInvalidParamInRequest |
| } else if !isServiceExist && !isParmsInvalid { |
| return errorCodes.ErrPortNotFound |
| } |
| return nil |
| } |
| |
| // GetServicePbit to get first set bit in the pbit map |
| // returns -1 : If configured to match on all pbits |
| // returns 8 : If no pbits are configured |
| // returns first pbit if specific pbit is configured |
| func (vs *VoltService) GetServicePbit() int { |
| if vs.IsPbitExist(of.PbitMatchAll) { |
| return -1 |
| } |
| for pbit := 0; pbit < int(of.PbitMatchNone); pbit++ { |
| if vs.IsPbitExist(of.PbitType(pbit)) { |
| return pbit |
| } |
| } |
| return int(of.PbitMatchNone) |
| } |