blob: d1ac455b879717384e11e4e6c6fd9830e7e65ca6 [file] [log] [blame]
#
# Copyright 2018 the original author or authors.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
"""
Interface definition for Voltha Adapters
"""
from zope.interface import Interface
class IAdapterInterface(Interface):
"""
A Voltha adapter. This interface is used by the Voltha Core to initiate
requests towards a voltha adapter.
"""
def adapter_descriptor():
"""
Return the adapter descriptor object for this adapter.
:return: voltha.Adapter grpc object (see voltha/protos/adapter.proto),
with adapter-specific information and config extensions.
"""
def device_types():
"""
Return list of device types supported by the adapter.
:return: voltha.DeviceTypes protobuf object, with optional type
specific extensions.
"""
def health():
"""
Return a 3-state health status using the voltha.HealthStatus message.
:return: Deferred or direct return with voltha.HealthStatus message
"""
def adopt_device(device):
"""
Make sure the adapter looks after given device. Called when a device
is provisioned top-down and needs to be activated by the adapter.
:param device: A voltha.Device object, with possible device-type
specific extensions. Such extensions shall be described as part of
the device type specification returned by device_types().
:return: (Deferred) Shall be fired to acknowledge device ownership.
"""
def reconcile_device(device):
"""
Make sure the adapter looks after given device. Called when this
device has changed ownership from another Voltha instance to
this one (typically, this occurs when the previous voltha
instance went down).
:param device: A voltha.Device object, with possible device-type
specific extensions. Such extensions shall be described as part of
the device type specification returned by device_types().
:return: (Deferred) Shall be fired to acknowledge device ownership.
"""
def abandon_device(device):
"""
Make sur ethe adapter no longer looks after device. This is called
if device ownership is taken over by another Voltha instance.
:param device: A Voltha.Device object.
:return: (Deferred) Shall be fired to acknowledge abandonment.
"""
def disable_device(device):
"""
This is called when a previously enabled device needs to be disabled
based on a NBI call.
:param device: A Voltha.Device object.
:return: (Deferred) Shall be fired to acknowledge disabling the device.
"""
def reenable_device(device):
"""
This is called when a previously disabled device needs to be enabled
based on a NBI call.
:param device: A Voltha.Device object.
:return: (Deferred) Shall be fired to acknowledge re-enabling the
device.
"""
def reboot_device(device):
"""
This is called to reboot a device based on a NBI call. The admin
state of the device will not change after the reboot
:param device: A Voltha.Device object.
:return: (Deferred) Shall be fired to acknowledge the reboot.
"""
def download_image(device, request):
"""
This is called to request downloading a specified image into
the standby partition of a device based on a NBI call.
This call is expected to be non-blocking.
:param device: A Voltha.Device object.
A Voltha.ImageDownload object.
:return: (Deferred) Shall be fired to acknowledge the download.
"""
def get_image_download_status(device, request):
"""
This is called to inquire about a requested image download
status based on a NBI call.
The adapter is expected to update the DownloadImage DB object
with the query result
:param device: A Voltha.Device object.
A Voltha.ImageDownload object.
:return: (Deferred) Shall be fired to acknowledge
"""
def cancel_image_download(device, request):
"""
This is called to cancel a requested image download
based on a NBI call. The admin state of the device will not
change after the download.
:param device: A Voltha.Device object.
A Voltha.ImageDownload object.
:return: (Deferred) Shall be fired to acknowledge
"""
def activate_image_update(device, request):
"""
This is called to activate a downloaded image from
a standby partition into active partition.
Depending on the device implementation, this call
may or may not cause device reboot.
If no reboot, then a reboot is required to make the
activated image running on device
This call is expected to be non-blocking.
:param device: A Voltha.Device object.
A Voltha.ImageDownload object.
:return: (Deferred) OperationResponse object.
"""
def revert_image_update(device, request):
"""
This is called to deactivate the specified image at
active partition, and revert to previous image at
standby partition.
Depending on the device implementation, this call
may or may not cause device reboot.
If no reboot, then a reboot is required to make the
previous image running on device
This call is expected to be non-blocking.
:param device: A Voltha.Device object.
A Voltha.ImageDownload object.
:return: (Deferred) OperationResponse object.
"""
def self_test_device(device):
"""
This is called to Self a device based on a NBI call.
:param device: A Voltha.Device object.
:return: Will return result of self test
"""
def delete_device(device):
"""
This is called to delete a device from the PON based on a NBI call.
If the device is an OLT then the whole PON will be deleted.
:param device: A Voltha.Device object.
:return: (Deferred) Shall be fired to acknowledge the deletion.
"""
def get_device_details(device):
"""
This is called to get additional device details based on a NBI call.
:param device: A Voltha.Device object.
:return: (Deferred) Shall be fired to acknowledge the retrieval of
additional details.
"""
def update_flows_bulk(device, flows, groups):
"""
Called after any flow table change, but only if the device supports
bulk mode, which is expressed by the 'accepts_bulk_flow_update'
capability attribute of the device type.
:param device: A Voltha.Device object.
:param flows: An openflow_v13.Flows object
:param groups: An openflow_v13.Flows object
:return: (Deferred or None)
"""
def update_flows_incrementally(device, flow_changes, group_changes):
"""
Called after a flow table update, but only if the device supports
non-bulk mode, which is expressed by the 'accepts_add_remove_flow_updates'
capability attribute of the device type.
:param device: A Voltha.Device object.
:param flow_changes: An openflow_v13.FlowChanges object
:param group_changes: An openflow_v13.FlowGroupChanges object
:return: (Deferred or None)
"""
def update_pm_config(device, pm_configs):
"""
Called every time a request is made to change pm collection behavior
:param device: A Voltha.Device object
:param pm_collection_config: A Pms
"""
def receive_packet_out(device_id, egress_port_no, msg):
"""
Pass a packet_out message content to adapter so that it can forward
it out to the device. This is only called on root devices.
:param device_id: device ID
:param egress_port: egress logical port number
:param msg: actual message
:return: None
"""
def suppress_alarm(filter):
"""
Inform an adapter that all incoming alarms should be suppressed
:param filter: A Voltha.AlarmFilter object.
:return: (Deferred) Shall be fired to acknowledge the suppression.
"""
def unsuppress_alarm(filter):
"""
Inform an adapter that all incoming alarms should resume
:param filter: A Voltha.AlarmFilter object.
:return: (Deferred) Shall be fired to acknowledge the unsuppression.
"""
def get_ofp_device_info(device):
"""
Retrieve the OLT device info. This includes the ofp_desc and
ofp_switch_features. The existing ofp structures can be used,
or all the attributes get added to the Device definition or a new proto
definition gets created. This API will allow the Core to create a
LogicalDevice associated with this device (OLT only).
:param device: device
:return: Proto Message (TBD)
"""
def get_ofp_port_info(device, port_no):
"""
Retrieve the port info. This includes the ofp_port. The existing ofp
structure can be used, or all the attributes get added to the Port
definitions or a new proto definition gets created. This API will allow
the Core to create a LogicalPort associated with this device.
:param device: device
:param port_no: port number
:return: Proto Message (TBD)
"""
# def start():
# """
# Called once after adapter instance is laoded. Can be used to async
# initialization.
# :return: (None or Deferred)
# """
#
# def stop():
# """
# Called once before adapter is unloaded. It can be used to perform
# any cleanup after the adapter.
# :return: (None or Deferred)
# """
#
# def receive_inter_adapter_message(msg):
# """
# Called when the adapter recieves a message that was sent to it directly
# from another adapter. An adapter may register for these messages by calling
# the register_for_inter_adapter_messages() method in the adapter agent.
# Note that it is the responsibility of the sending and receiving
# adapters to properly encode and decode the message.
# :param msg: The message contents.
# :return: None
# """
#
# def send_proxied_message(proxy_address, msg):
# """
# Forward a msg to a child device of device, addressed by the given
# proxy_address=Device.ProxyAddress().
# :param proxy_address: Address info for the parent device
# to route the message to the child device. This was given to the
# child device by the parent device at the creation of the child
# device.
# :param msg: (str) The actual message to send.
# :return: (Deferred(None) or None) The return of this method should
# indicate that the message was successfully *sent*.
# """
#
# def receive_proxied_message(proxy_address, msg):
# """
# Pass an async message (arrived via a proxy) to this device.
# :param proxy_address: Address info for the parent device
# to route the message to the child device. This was given to the
# child device by the parent device at the creation of the child
# device. Note this is the proxy_address with which the adapter
# had to register prior to receiving proxied messages.
# :param msg: (str) The actual message received.
# :return: None
# """
#
# def receive_packet_out(logical_device_id, egress_port_no, msg):
# """
# Pass a packet_out message content to adapter so that it can forward it
# out to the device. This is only called on root devices.
# :param logical_device_id:
# :param egress_port: egress logical port number
# :param msg: actual message
# :return: None
# """
#
# def change_master_state(master):
# """
# Called to indicate if plugin shall assume or lose master role. The
# master role can be used to perform functions that must be performed
# from a single point in the cluster. In single-node deployments of
# Voltha, the plugins are always in master role.
# :param master: (bool) True to indicate the mastership needs to be
# assumed; False to indicate that mastership needs to be abandoned.
# :return: (Deferred) which is fired by the adapter when mastership is
# assumed/dropped, respectively.
# """
# class IAdapterAgent(Interface):
# """
# This object is passed in to the __init__ function of each adapter,
# and can be used by the adapter implementation to initiate async calls
# toward Voltha's CORE via the APIs defined here.
# """
#
# def get_device(device_id):
# # TODO add doc
# """"""
#
# def add_device(device):
# # TODO add doc
# """"""
#
# def update_device(device):
# # TODO add doc
# """"""
#
# def add_port(device_id, port):
# # TODO add doc
# """"""
#
# def create_logical_device(logical_device):
# # TODO add doc
# """"""
#
# def add_logical_port(logical_device_id, port):
# # TODO add doc
# """"""
#
# def child_device_detected(parent_device_id,
# parent_port_no,
# child_device_type,
# proxy_address,
# admin_state,
# **kw):
# # TODO add doc
# """"""
#
# def send_proxied_message(proxy_address, msg):
# """
# Forward a msg to a child device of device, addressed by the given
# proxy_address=Device.ProxyAddress().
# :param proxy_address: Address info for the parent device
# to route the message to the child device. This was given to the
# child device by the parent device at the creation of the child
# device.
# :param msg: (str) The actual message to send.
# :return: (Deferred(None) or None) The return of this method should
# indicate that the message was successfully *sent*.
# """
#
# def receive_proxied_message(proxy_address, msg):
# """
# Pass an async message (arrived via a proxy) to this device.
# :param proxy_address: Address info for the parent device
# to route the message to the child device. This was given to the
# child device by the parent device at the creation of the child
# device. Note this is the proxy_address with which the adapter
# had to register prior to receiving proxied messages.
# :param msg: (str) The actual message received.
# :return: None
# """
#
# def register_for_proxied_messages(proxy_address):
# """
# A child device adapter can use this to indicate its intent to
# receive async messages sent via a parent device. Example: an
# ONU adapter can use this to register for OMCI messages received
# via the OLT and the OLT adapter.
# :param child_device_address: Address info that was given to the
# child device by the parent device at the creation of the child
# device. Its uniqueness acts as a router information for the
# registration.
# :return: None
# """
#
# def unregister_for_proxied_messages(proxy_address):
# """
# Cancel a previous registration
# :return:
# """
#
# def send_packet_in(logical_device_id, logical_port_no, packet):
# """
# Forward given packet to the northbound toward an SDN controller.
# :param device_id: logical device identifier
# :param logical_port_no: logical port_no (as numbered in openflow)
# :param packet: the actual packet; can be a serialized string or a scapy
# Packet.
# :return: None returned on success
# """
#
# def submit_kpis(kpi_event_msg):
# """
# Submit KPI metrics on behalf of the OLT and its adapter. This can
# include hardware related metrics, usage and utilization metrics, as
# well as optional adapter specific metrics.
# :param kpi_event_msg: A protobuf message of KpiEvent type.
# :return: None
# """
#
# def submit_alarm(device_id, alarm_event_msg):
# """
# Submit an alarm on behalf of the OLT and its adapter.
# :param alarm_event_msg: A protobuf message of AlarmEvent type.
# :return: None
# """
#
# def register_for_onu_detect_state(proxy_address):
# """
#
# :return: None
# """
#
# def unregister_for_onu_detect_state(proxy_address):
# """
#
# :return: None
# """
#
# def forward_onu_detect_state(proxy_address, state):
# """
# Forward onu detect state to ONU adapter
# :param proxy_address: ONU device address
# :param state: ONU detect state (bool)
# :return: None
# """
class ICoreSouthBoundInterface(Interface):
"""
Represents a Voltha Core. This is used by an adapter to initiate async
calls towards Voltha Core.
"""
def get_device(device_id):
"""
Retrieve a device using its ID.
:param device_id: a device ID
:return: Device Object or None
"""
def get_child_device(parent_device_id, **kwargs):
"""
Retrieve a child device object belonging to the specified parent
device based on some match criteria. The first child device that
matches the provided criteria is returned.
:param parent_device_id: parent's device protobuf ID
:param **kwargs: arbitrary list of match criteria where the Value
in each key-value pair must be a protobuf type
:return: Child Device Object or None
"""
def get_ports(device_id, port_type):
"""
Retrieve all the ports of a given type of a Device.
:param device_id: a device ID
:param port_type: type of port
:return Ports object
"""
def get_child_devices(parent_device_id):
"""
Get all child devices given a parent device id
:param parent_device_id: The parent device ID
:return: Devices object
"""
def get_child_device_with_proxy_address(proxy_address):
"""
Get a child device based on its proxy address. Proxy address is
defined as {parent id, channel_id}
:param proxy_address: A Device.ProxyAddress object
:return: Device object or None
"""
def device_state_update(device_id,
oper_status=None,
connect_status=None):
"""
Update a device state.
:param device_id: The device ID
:param oper_state: Operational state of device
:param conn_state: Connection state of device
:return: None
"""
def child_device_detected(parent_device_id,
parent_port_no,
child_device_type,
channel_id,
**kw):
"""
A child device has been detected. Core will create the device along
with its unique ID.
:param parent_device_id: The parent device ID
:param parent_port_no: The parent port number
:param device_type: The child device type
:param channel_id: A unique identifier for that child device within
the parent device (e.g. vlan_id)
:param kw: A list of key-value pair where the value is a protobuf
message
:return: None
"""
def device_update(device):
"""
Event corresponding to a device update.
:param device: Device Object
:return: None
"""
def child_device_removed(parent_device_id, child_device_id):
"""
Event indicating a child device has been removed from a parent.
:param parent_device_id: Device ID of the parent
:param child_device_id: Device ID of the child
:return: None
"""
def child_devices_state_update(parent_device_id,
oper_status=None,
connect_status=None,
admin_status=None):
"""
Event indicating the status of all child devices have been changed.
:param parent_device_id: Device ID of the parent
:param oper_status: Operational status
:param connect_status: Connection status
:param admin_status: Admin status
:return: None
"""
def child_devices_removed(parent_device_id):
"""
Event indicating all child devices have been removed from a parent.
:param parent_device_id: Device ID of the parent device
:return: None
"""
def device_pm_config_update(device_pm_config, init=False):
"""
Event corresponding to a PM config update of a device.
:param device_pm_config: a PmConfigs object
:param init: True indicates initializing stage
:return: None
"""
def port_created(device_id, port):
"""
A port has been created and needs to be added to a device.
:param device_id: a device ID
:param port: Port object
:return None
"""
def port_removed(device_id, port):
"""
A port has been removed and it needs to be removed from a Device.
:param device_id: a device ID
:param port: a Port object
:return None
"""
def ports_enabled(device_id):
"""
All ports on that device have been re-enabled. The Core will change
the admin state to ENABLED and operational state to ACTIVE for all
ports on that device.
:param device_id: a device ID
:return: None
"""
def ports_disabled(device_id):
"""
All ports on that device have been disabled. The Core will change the
admin status to DISABLED and operational state to UNKNOWN for all
ports on that device.
:param device_id: a device ID
:return: None
"""
def ports_oper_status_update(device_id, oper_status):
"""
The operational status of all ports of a Device has been changed.
The Core will update the operational status for all ports on the
device.
:param device_id: a device ID
:param oper_status: operational Status
:return None
"""
def image_download_update(img_dnld):
"""
Event corresponding to an image download update.
:param img_dnld: a ImageDownload object
:return: None
"""
def image_download_deleted(img_dnld):
"""
Event corresponding to the deletion of a downloaded image. The
references of this image needs to be removed from the Core.
:param img_dnld: a ImageDownload object
:return: None
"""
def packet_in(device_id, egress_port_no, packet):
"""
Sends a packet to the SDN controller via voltha Core
:param device_id: The OLT device ID
:param egress_port_no: The port number representing the ONU (cvid)
:param packet: The actual packet
:return: None
"""
# def add_device(device):
# # TODO add doc
# """"""
# def update_device(device):
# # TODO add doc
# """"""
# def add_port(device_id, port):
# # TODO add doc
# """"""
# def create_logical_device(logical_device):
# # TODO add doc
# """"""
#
# def add_logical_port(logical_device_id, port):
# # TODO add doc
# """"""
# def child_device_detected(parent_device_id,
# parent_port_no,
# child_device_type,
# proxy_address,
# admin_state,
# **kw):
# # TODO add doc
# """"""
# def send_proxied_message(proxy_address, msg):
# """
# Forward a msg to a child device of device, addressed by the given
# proxy_address=Device.ProxyAddress().
# :param proxy_address: Address info for the parent device
# to route the message to the child device. This was given to the
# child device by the parent device at the creation of the child
# device.
# :param msg: (str) The actual message to send.
# :return: (Deferred(None) or None) The return of this method should
# indicate that the message was successfully *sent*.
# """
#
# def receive_proxied_message(proxy_address, msg):
# """
# Pass an async message (arrived via a proxy) to this device.
# :param proxy_address: Address info for the parent device
# to route the message to the child device. This was given to the
# child device by the parent device at the creation of the child
# device. Note this is the proxy_address with which the adapter
# had to register prior to receiving proxied messages.
# :param msg: (str) The actual message received.
# :return: None
# """
#
# def register_for_proxied_messages(proxy_address):
# """
# A child device adapter can use this to indicate its intent to
# receive async messages sent via a parent device. Example: an
# ONU adapter can use this to register for OMCI messages received
# via the OLT and the OLT adapter.
# :param child_device_address: Address info that was given to the
# child device by the parent device at the creation of the child
# device. Its uniqueness acts as a router information for the
# registration.
# :return: None
# """
#
# def unregister_for_proxied_messages(proxy_address):
# """
# Cancel a previous registration
# :return:
# """
#
# def submit_kpis(kpi_event_msg):
# """
# Submit KPI metrics on behalf of the OLT and its adapter. This can
# include hardware related metrics, usage and utilization metrics, as
# well as optional adapter specific metrics.
# :param kpi_event_msg: A protobuf message of KpiEvent type.
# :return: None
# """
#
# def submit_alarm(device_id, alarm_event_msg):
# """
# Submit an alarm on behalf of the OLT and its adapter.
# :param alarm_event_msg: A protobuf message of AlarmEvent type.
# :return: None
# """
# def register_for_onu_detect_state(proxy_address):
# """
#
# :return: None
# """
#
# def unregister_for_onu_detect_state(proxy_address):
# """
#
# :return: None
# """
#
# def forward_onu_detect_state(proxy_address, state):
# """
# Forward onu detect state to ONU adapter
# :param proxy_address: ONU device address
# :param state: ONU detect state (bool)
# :return: None
# """
#
# def send_packet_in(logical_device_id, logical_port_no, packet):
# """
# Forward given packet to the northbound toward an SDN controller.
# :param device_id: logical device identifier
# :param logical_port_no: logical port_no (as numbered in openflow)
# :param packet: the actual packet; can be a serialized string or a
# scapy Packet.
# :return: None returned on success
# """