rw_core/route/device_route.go - voltha-go - Gitiles

 /*
  * Copyright 2020-present Open Networking Foundation
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at
  *
  * http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */

 package route

 import (
 	"context"
 	"errors"
 	"fmt"
 	"sync"

 	"github.com/opencord/voltha-lib-go/v3/pkg/log"
 	"github.com/opencord/voltha-protos/v3/go/voltha"
 	"google.golang.org/grpc/codes"
 	"google.golang.org/grpc/status"
 )

 var ErrNoRoute = errors.New("no route")

 // Hop represent a route hop
 type Hop struct {
 	DeviceID string
 	Ingress  uint32
 	Egress   uint32
 }

 // PathID is the identification of a route between two logical ports
 type PathID struct {
 	Ingress uint32
 	Egress  uint32
 }

 type OFPortLink struct {
 	Ingress uint32
 	Egress  uint32
 }

 // listDevicePortsFunc returns device ports
 type listDevicePortsFunc func(ctx context.Context, id string) (map[uint32]*voltha.Port, error)

 // DeviceRoutes represent the set of routes between logical ports of a logical device
 type DeviceRoutes struct {
 	logicalDeviceID     string
 	rootDeviceID        string
 	listDevicePorts     listDevicePortsFunc
 	logicalPorts        map[uint32]*voltha.LogicalPort
 	RootPorts           map[uint32]uint32
 	rootPortsLock       sync.RWMutex
 	Routes              map[PathID][]Hop
 	routeBuildLock      sync.RWMutex
 	devicesPonPorts     map[string][]*voltha.Port
 	childConnectionPort map[string]uint32
 }

 // NewDeviceRoutes creates device graph instance
 func NewDeviceRoutes(logicalDeviceID, rootDeviceID string, deviceMgr listDevicePortsFunc) *DeviceRoutes {
 	return &DeviceRoutes{
 		logicalDeviceID:     logicalDeviceID,
 		rootDeviceID:        rootDeviceID,
 		listDevicePorts:     deviceMgr,
 		RootPorts:           make(map[uint32]uint32),
 		Routes:              make(map[PathID][]Hop),
 		devicesPonPorts:     make(map[string][]*voltha.Port),
 		childConnectionPort: make(map[string]uint32),
 		logicalPorts:        make(map[uint32]*voltha.LogicalPort),
 	}
 }

 //IsRootPort returns true if the port is a root port on a logical device
 func (dr *DeviceRoutes) IsRootPort(port uint32) bool {
 	dr.rootPortsLock.RLock()
 	defer dr.rootPortsLock.RUnlock()
 	_, exist := dr.RootPorts[port]
 	return exist
 }

 func (dr *DeviceRoutes) GetRoute(ctx context.Context, ingress, egress uint32) ([]Hop, error) {
 	dr.routeBuildLock.Lock()
 	defer dr.routeBuildLock.Unlock()

 	if route, exist := dr.Routes[PathID{Ingress: ingress, Egress: egress}]; exist {
 		return route, nil
 	}

 	uniPort, nniPort, err := dr.getLogicalPorts(ingress, egress)
 	if err != nil {
 		return nil, fmt.Errorf("no route from:%d to:%d %w", ingress, egress, err)
 	}

 	childPonPort, err := dr.getChildPonPort(ctx, uniPort.DeviceId)
 	if err != nil {
 		return nil, err
 	}
 	rootDevicePonPort, err := dr.getParentPonPort(ctx, uniPort.DeviceId)
 	if err != nil {
 		return nil, err
 	}

 	dr.Routes[PathID{Ingress: nniPort.OfpPort.PortNo, Egress: uniPort.DevicePortNo}] = []Hop{
 		{DeviceID: nniPort.DeviceId, Ingress: nniPort.DevicePortNo, Egress: rootDevicePonPort},
 		{DeviceID: uniPort.DeviceId, Ingress: childPonPort, Egress: uniPort.DevicePortNo},
 	}
 	dr.Routes[PathID{Ingress: uniPort.DevicePortNo, Egress: nniPort.OfpPort.PortNo}] = getReverseRoute(
 		dr.Routes[PathID{Ingress: nniPort.OfpPort.PortNo, Egress: uniPort.DevicePortNo}])

 	return dr.Routes[PathID{Ingress: ingress, Egress: egress}], nil

 }

 //ComputeRoutes calculates all the routes between the logical ports.  This will clear up any existing route
 func (dr *DeviceRoutes) ComputeRoutes(ctx context.Context, lps map[uint32]*voltha.LogicalPort) error {
 	dr.routeBuildLock.Lock()
 	defer dr.routeBuildLock.Unlock()

 	logger.Debugw(ctx, "computing-all-routes", log.Fields{"len-logical-ports": len(lps)})
 	var err error
 	defer func() {
 		// On error, clear the routes - any flow request or a port add/delete will trigger the rebuild
 		if err != nil {
 			dr.reset()
 		}
 	}()

 	if len(lps) < 2 {
 		return fmt.Errorf("not enough logical port :%w", ErrNoRoute)
 	}

 	dr.reset()

 	// Setup the physical ports to logical ports map, the nni ports as well as the root ports map
 	physPortToLogicalPortMap := make(map[string]uint32)
 	nniPorts := make([]*voltha.LogicalPort, 0)
 	for _, lp := range lps {
 		physPortToLogicalPortMap[concatDeviceIDPortID(lp.DeviceId, lp.DevicePortNo)] = lp.OfpPort.PortNo
 		if lp.RootPort {
 			nniPorts = append(nniPorts, lp)
 			dr.RootPorts[lp.OfpPort.PortNo] = lp.OfpPort.PortNo
 		}
 		dr.logicalPorts[lp.OfpPort.PortNo] = lp
 	}

 	if len(nniPorts) == 0 {
 		return fmt.Errorf("no nni port :%w", ErrNoRoute)
 	}
 	var copyFromNNIPort *voltha.LogicalPort
 	for idx, nniPort := range nniPorts {
 		if idx == 0 {
 			copyFromNNIPort = nniPort
 		} else if len(dr.Routes) > 0 {
 			dr.copyFromExistingNNIRoutes(nniPort, copyFromNNIPort)
 			return nil
 		}
 		// Get root device
 		rootDeviceID := nniPort.DeviceId
 		rootDevicePorts, err := dr.getDeviceWithCacheUpdate(ctx, nniPort.DeviceId)
 		if err != nil {
 			return err
 		}
 		if len(rootDevicePorts) == 0 {
 			err = status.Errorf(codes.FailedPrecondition, "no-port-%s", rootDeviceID)
 			return err
 		}
 		for _, rootDevicePort := range rootDevicePorts {
 			if rootDevicePort.Type == voltha.Port_PON_OLT {
 				logger.Debugw(ctx, "peers", log.Fields{"root-device-id": rootDeviceID, "port-no": rootDevicePort.PortNo, "len-peers": len(rootDevicePort.Peers)})
 				for _, rootDevicePeer := range rootDevicePort.Peers {
 					childDeviceID := rootDevicePeer.DeviceId
 					childDevicePorts, err := dr.getDeviceWithCacheUpdate(ctx, rootDevicePeer.DeviceId)
 					if err != nil {
 						return err
 					}
 					childPonPort, err := dr.getChildPonPort(ctx, childDeviceID)
 					if err != nil {
 						return err
 					}
 					for _, childDevicePort := range childDevicePorts {
 						if childDevicePort.Type == voltha.Port_ETHERNET_UNI {
 							childLogicalPort, exist := physPortToLogicalPortMap[concatDeviceIDPortID(childDeviceID, childDevicePort.PortNo)]
 							if !exist {
 								// This can happen if this logical port has not been created yet for that device
 								continue
 							}
 							dr.Routes[PathID{Ingress: nniPort.OfpPort.PortNo, Egress: childLogicalPort}] = []Hop{
 								{DeviceID: rootDeviceID, Ingress: nniPort.DevicePortNo, Egress: rootDevicePort.PortNo},
 								{DeviceID: childDeviceID, Ingress: childPonPort, Egress: childDevicePort.PortNo},
 							}
 							dr.Routes[PathID{Ingress: childLogicalPort, Egress: nniPort.OfpPort.PortNo}] = getReverseRoute(
 								dr.Routes[PathID{Ingress: nniPort.OfpPort.PortNo, Egress: childLogicalPort}])
 						}
 					}
 				}
 			}
 		}
 	}
 	return nil
 }

 // AddPort augments the current set of routes with new routes corresponding to the logical port "lp".  If the routes have
 // not been built yet then use logical port "lps" to compute all current routes (lps includes lp)
 func (dr *DeviceRoutes) AddPort(ctx context.Context, lp *voltha.LogicalPort, deviceID string, devicePorts map[uint32]*voltha.Port, lps map[uint32]*voltha.LogicalPort) error {
 	logger.Debugw(ctx, "add-port-to-routes", log.Fields{"port": lp, "count-logical-ports": len(lps)})

 	// Adding NNI port
 	if lp.RootPort {
 		return dr.AddNNIPort(ctx, lp, deviceID, devicePorts, lps)
 	}

 	// Adding UNI port
 	return dr.AddUNIPort(ctx, lp, deviceID, devicePorts, lps)
 }

 // AddUNIPort setup routes between the logical UNI port lp and all registered NNI ports
 func (dr *DeviceRoutes) AddUNIPort(ctx context.Context, lp *voltha.LogicalPort, deviceID string, devicePorts map[uint32]*voltha.Port, lps map[uint32]*voltha.LogicalPort) error {
 	logger.Debugw(ctx, "add-uni-port-to-routes", log.Fields{"port": lp, "count-logical-ports": len(lps)})

 	dr.routeBuildLock.Lock()
 	defer dr.routeBuildLock.Unlock()

 	// Add port to logical ports
 	dr.logicalPorts[lp.OfpPort.PortNo] = lp

 	// Update internal structures with device data
 	dr.updateCache(deviceID, devicePorts)

 	// Adding a UNI port
 	childPonPort, err := dr.getChildPonPort(ctx, lp.DeviceId)
 	if err != nil {
 		return err
 	}
 	rootDevicePonPort, err := dr.getParentPonPort(ctx, deviceID)
 	if err != nil {
 		return err
 	}

 	// Adding a UNI port
 	for _, lPort := range lps {
 		if lPort.RootPort {
 			dr.Routes[PathID{Ingress: lPort.OfpPort.PortNo, Egress: lp.OfpPort.PortNo}] = []Hop{
 				{DeviceID: lPort.DeviceId, Ingress: lPort.DevicePortNo, Egress: rootDevicePonPort},
 				{DeviceID: lp.DeviceId, Ingress: childPonPort, Egress: lp.DevicePortNo},
 			}
 			dr.Routes[PathID{Ingress: lp.OfpPort.PortNo, Egress: lPort.OfpPort.PortNo}] = getReverseRoute(
 				dr.Routes[PathID{Ingress: lPort.OfpPort.PortNo, Egress: lp.OfpPort.PortNo}])
 		}
 	}
 	return nil
 }

 // AddNNIPort setup routes between the logical NNI port lp and all registered UNI ports
 func (dr *DeviceRoutes) AddNNIPort(ctx context.Context, lp *voltha.LogicalPort, deviceID string, devicePorts map[uint32]*voltha.Port, lps map[uint32]*voltha.LogicalPort) error {
 	logger.Debugw(ctx, "add-port-to-routes", log.Fields{"port": lp, "logical-ports-count": len(lps), "device-id": deviceID})

 	dr.routeBuildLock.Lock()
 	defer dr.routeBuildLock.Unlock()

 	// Update internal structures with device data
 	dr.updateCache(deviceID, devicePorts)

 	// Setup the physical ports to logical ports map, the nni ports as well as the root ports map
 	physPortToLogicalPortMap := make(map[string]uint32)
 	for _, lp := range lps {
 		physPortToLogicalPortMap[concatDeviceIDPortID(lp.DeviceId, lp.DevicePortNo)] = lp.OfpPort.PortNo
 		if lp.RootPort {
 			dr.rootPortsLock.Lock()
 			dr.RootPorts[lp.OfpPort.PortNo] = lp.OfpPort.PortNo
 			dr.rootPortsLock.Unlock()
 		}
 		dr.logicalPorts[lp.OfpPort.PortNo] = lp
 	}

 	for _, rootDevicePort := range devicePorts {
 		if rootDevicePort.Type == voltha.Port_PON_OLT {
 			logger.Debugw(ctx, "peers", log.Fields{"root-device-id": deviceID, "port-no": rootDevicePort.PortNo, "len-peers": len(rootDevicePort.Peers)})
 			for _, rootDevicePeer := range rootDevicePort.Peers {
 				childDeviceID := rootDevicePeer.DeviceId
 				childDevicePorts, err := dr.getDeviceWithCacheUpdate(ctx, rootDevicePeer.DeviceId)
 				if err != nil {
 					continue
 				}

 				childPonPort, err := dr.getChildPonPort(ctx, childDeviceID)
 				if err != nil {
 					continue
 				}

 				for _, childDevicePort := range childDevicePorts {
 					childLogicalPort, exist := physPortToLogicalPortMap[concatDeviceIDPortID(childDeviceID, childDevicePort.PortNo)]
 					if !exist {
 						// This can happen if this logical port has not been created yet for that device
 						continue
 					}

 					if childDevicePort.Type == voltha.Port_ETHERNET_UNI {
 						dr.Routes[PathID{Ingress: lp.OfpPort.PortNo, Egress: childLogicalPort}] = []Hop{
 							{DeviceID: deviceID, Ingress: lp.DevicePortNo, Egress: rootDevicePort.PortNo},
 							{DeviceID: childDeviceID, Ingress: childPonPort, Egress: childDevicePort.PortNo},
 						}
 						dr.Routes[PathID{Ingress: childLogicalPort, Egress: lp.OfpPort.PortNo}] = getReverseRoute(
 							dr.Routes[PathID{Ingress: lp.OfpPort.PortNo, Egress: childLogicalPort}])
 					}
 				}
 			}
 		}
 	}
 	return nil
 }

 // AddAllPorts setups up new routes using all ports on the device. lps includes the device's logical port
 func (dr *DeviceRoutes) AddAllPorts(ctx context.Context, deviceID string, devicePorts map[uint32]*voltha.Port, lps map[uint32]*voltha.LogicalPort) error {
 	logger.Debugw(ctx, "add-all-port-to-routes", log.Fields{"logical-ports-count": len(lps), "device-id": deviceID})
 	for _, lp := range lps {
 		if lp.DeviceId == deviceID {
 			if err := dr.AddPort(ctx, lp, deviceID, devicePorts, lps); err != nil {
 				return err
 			}
 		}
 	}
 	return nil
 }

 // Print prints routes
 func (dr *DeviceRoutes) Print(ctx context.Context) error {
 	dr.routeBuildLock.RLock()
 	defer dr.routeBuildLock.RUnlock()
 	logger.Debugw(ctx, "Print", log.Fields{"logical-device-id": dr.logicalDeviceID, "logical-ports": dr.logicalPorts})
 	if logger.V(log.DebugLevel) {
 		output := ""
 		routeNumber := 1
 		for k, v := range dr.Routes {
 			key := fmt.Sprintf("LP:%d->LP:%d", k.Ingress, k.Egress)
 			val := ""
 			for _, i := range v {
 				val += fmt.Sprintf("{%d->%s->%d},", i.Ingress, i.DeviceID, i.Egress)
 			}
 			val = val[:len(val)-1]
 			output += fmt.Sprintf("%d:{%s=>%s}   ", routeNumber, key, fmt.Sprintf("[%s]", val))
 			routeNumber++
 		}
 		if len(dr.Routes) == 0 {
 			logger.Debugw(ctx, "no-routes-found", log.Fields{"logical-device-id": dr.logicalDeviceID})
 		} else {
 			logger.Debugw(ctx, "graph_routes", log.Fields{"logical-device-id": dr.logicalDeviceID, "Routes": output})
 		}
 	}
 	return nil
 }

 // isUpToDate returns true if device is up to date
 func (dr *DeviceRoutes) isUpToDate(ldPorts map[uint32]*voltha.LogicalPort) bool {
 	dr.routeBuildLock.Lock()
 	defer dr.routeBuildLock.Unlock()
 	numNNI, numUNI := 0, 0
 	if ldPorts != nil {
 		if len(dr.logicalPorts) != len(ldPorts) {
 			return false
 		}
 		numNNI = len(dr.RootPorts)
 		numUNI = len(ldPorts) - numNNI
 	}
 	return len(dr.Routes) == numNNI*numUNI*2
 }

 // IsRoutesEmpty returns true if there are no routes
 func (dr *DeviceRoutes) IsRoutesEmpty() bool {
 	dr.routeBuildLock.RLock()
 	defer dr.routeBuildLock.RUnlock()
 	return len(dr.Routes) == 0
 }

 // GetHalfRoute returns a half route that has only the egress hop set or the ingress hop set
 func (dr *DeviceRoutes) GetHalfRoute(nniAsEgress bool, ingress, egress uint32) ([]Hop, error) {
 	dr.routeBuildLock.RLock()
 	defer dr.routeBuildLock.RUnlock()
 	routes := make([]Hop, 0)
 	for routeLink, path := range dr.Routes {
 		// If nniAsEgress is set then the half route will only have the egress hop set where the egress port needs to be
 		// an NNI port
 		if nniAsEgress {
 			// Prioritize a specific egress NNI port if set
 			if egress != 0 && dr.IsRootPort(egress) && routeLink.Egress == egress {
 				routes = append(routes, Hop{})
 				routes = append(routes, path[1])
 				return routes, nil
 			}
 			if egress == 0 && dr.IsRootPort(routeLink.Egress) {
 				routes = append(routes, Hop{})
 				routes = append(routes, path[1])
 				return routes, nil
 			}
 		} else {
 			// Here we use the first route whose ingress port matches the ingress input parameter
 			if ingress != 0 && routeLink.Ingress == ingress {
 				routes = append(routes, path[0])
 				routes = append(routes, Hop{})
 				return routes, nil
 			}
 		}
 	}
 	return routes, fmt.Errorf("no half route found for ingress port %d, egress port %d and nni as egress %t", ingress, egress, nniAsEgress)
 }

 //getDeviceWithCacheUpdate returns the from the model and updates the PON ports map of that device.
 func (dr *DeviceRoutes) getDeviceWithCacheUpdate(ctx context.Context, deviceID string) (map[uint32]*voltha.Port, error) {
 	devicePorts, err := dr.listDevicePorts(ctx, deviceID)
 	if err != nil {
 		logger.Errorw(ctx, "device-not-found", log.Fields{"device-id": deviceID, "error": err})
 		return nil, err
 	}
 	dr.updateCache(deviceID, devicePorts)
 	return devicePorts, nil
 }

 //copyFromExistingNNIRoutes copies routes from an existing set of NNI routes
 func (dr *DeviceRoutes) copyFromExistingNNIRoutes(newNNIPort *voltha.LogicalPort, copyFromNNIPort *voltha.LogicalPort) {
 	updatedRoutes := make(map[PathID][]Hop)
 	for key, val := range dr.Routes {
 		if key.Ingress == copyFromNNIPort.OfpPort.PortNo {
 			updatedRoutes[PathID{Ingress: newNNIPort.OfpPort.PortNo, Egress: key.Egress}] = []Hop{
 				{DeviceID: newNNIPort.DeviceId, Ingress: newNNIPort.DevicePortNo, Egress: val[0].Egress},
 				val[1],
 			}
 		}
 		if key.Egress == copyFromNNIPort.OfpPort.PortNo {
 			updatedRoutes[PathID{Ingress: key.Ingress, Egress: newNNIPort.OfpPort.PortNo}] = []Hop{
 				val[0],
 				{DeviceID: newNNIPort.DeviceId, Ingress: val[1].Ingress, Egress: newNNIPort.DevicePortNo},
 			}
 		}
 		updatedRoutes[key] = val
 	}
 	dr.Routes = updatedRoutes
 }

 // reset cleans up the device graph
 func (dr *DeviceRoutes) reset() {
 	dr.rootPortsLock.Lock()
 	dr.RootPorts = make(map[uint32]uint32)
 	dr.rootPortsLock.Unlock()
 	dr.Routes = make(map[PathID][]Hop)
 	dr.logicalPorts = make(map[uint32]*voltha.LogicalPort)
 	dr.devicesPonPorts = make(map[string][]*voltha.Port)
 	dr.childConnectionPort = make(map[string]uint32)
 }

 //concatDeviceIdPortId formats a portid using the device id and the port number
 func concatDeviceIDPortID(deviceID string, portNo uint32) string {
 	return fmt.Sprintf("%s:%d", deviceID, portNo)
 }

 //getReverseRoute returns the reverse of the route
 func getReverseRoute(route []Hop) []Hop {
 	reverse := make([]Hop, len(route))
 	for i, j := 0, len(route)-1; j >= 0; i, j = i+1, j-1 {
 		reverse[i].DeviceID, reverse[i].Ingress, reverse[i].Egress = route[j].DeviceID, route[j].Egress, route[j].Ingress
 	}
 	return reverse
 }

 // getChildPonPort returns the child PON port number either from cache or from the model. If it is from the model then
 // it updates the PON ports map of that device.
 func (dr *DeviceRoutes) getChildPonPort(ctx context.Context, deviceID string) (uint32, error) {
 	if port, exist := dr.devicesPonPorts[deviceID]; exist {
 		// Return only the first PON port of that child device
 		return port[0].PortNo, nil
 	}

 	// Get child device from model
 	if _, err := dr.getDeviceWithCacheUpdate(ctx, deviceID); err != nil {
 		logger.Errorw(ctx, "device-not-found", log.Fields{"device-id": deviceID, "error": err})
 		return 0, err
 	}

 	// Try again
 	if port, exist := dr.devicesPonPorts[deviceID]; exist {
 		// Return only the first PON port of that child device
 		return port[0].PortNo, nil
 	}

 	return 0, fmt.Errorf("pon port not found %s", deviceID)
 }

 // getParentPonPort returns the parent PON port of the child device
 func (dr *DeviceRoutes) getParentPonPort(ctx context.Context, childDeviceID string) (uint32, error) {
 	if pNo, exist := dr.childConnectionPort[childDeviceID]; exist {
 		return pNo, nil
 	}

 	// Get parent device from the model
 	if _, err := dr.getDeviceWithCacheUpdate(ctx, dr.rootDeviceID); err != nil {
 		logger.Errorw(ctx, "device-not-found", log.Fields{"device-id": dr.rootDeviceID, "error": err})
 		return 0, err
 	}
 	// Try again
 	if pNo, exist := dr.childConnectionPort[childDeviceID]; exist {
 		return pNo, nil
 	}
 	return 0, fmt.Errorf("pon port associated with child device %s not found", childDeviceID)
 }

 func (dr *DeviceRoutes) updateCache(deviceID string, devicePorts map[uint32]*voltha.Port) {
 	for _, port := range devicePorts {
 		if port.Type == voltha.Port_PON_ONU || port.Type == voltha.Port_PON_OLT {
 			dr.devicesPonPorts[deviceID] = append(dr.devicesPonPorts[deviceID], port)
 			for _, peer := range port.Peers {
 				if port.Type == voltha.Port_PON_ONU {
 					dr.childConnectionPort[port.DeviceId] = peer.PortNo
 				} else {
 					dr.childConnectionPort[peer.DeviceId] = port.PortNo
 				}
 			}
 		}
 	}
 }

 func (dr *DeviceRoutes) getLogicalPorts(ingress, egress uint32) (uniPort, nniPort *voltha.LogicalPort, err error) {
 	inPort, exist := dr.logicalPorts[ingress]
 	if !exist {
 		err = fmt.Errorf("ingress port %d not found", ingress)
 		return
 	}
 	outPort, exist := dr.logicalPorts[egress]
 	if !exist {
 		err = fmt.Errorf("egress port %d not found", egress)
 		return
 	}

 	if inPort.RootPort {
 		nniPort = inPort
 		uniPort = outPort
 	} else {
 		nniPort = outPort
 		uniPort = inPort
 	}

 	return
 }
	/*
	* Copyright 2020-present Open Networking Foundation
	*
	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*/

	package route

	import (
	"context"
	"errors"
	"fmt"
	"sync"

	"github.com/opencord/voltha-lib-go/v3/pkg/log"
	"github.com/opencord/voltha-protos/v3/go/voltha"
	"google.golang.org/grpc/codes"
	"google.golang.org/grpc/status"
	)

	var ErrNoRoute = errors.New("no route")

	// Hop represent a route hop
	type Hop struct {
	DeviceID string
	Ingress uint32
	Egress uint32
	}

	// PathID is the identification of a route between two logical ports
	type PathID struct {
	Ingress uint32
	Egress uint32
	}

	type OFPortLink struct {
	Ingress uint32
	Egress uint32
	}

	// listDevicePortsFunc returns device ports
	type listDevicePortsFunc func(ctx context.Context, id string) (map[uint32]*voltha.Port, error)

	// DeviceRoutes represent the set of routes between logical ports of a logical device
	type DeviceRoutes struct {
	logicalDeviceID string
	rootDeviceID string
	listDevicePorts listDevicePortsFunc
	logicalPorts map[uint32]*voltha.LogicalPort
	RootPorts map[uint32]uint32
	rootPortsLock sync.RWMutex
	Routes map[PathID][]Hop
	routeBuildLock sync.RWMutex
	devicesPonPorts map[string][]*voltha.Port
	childConnectionPort map[string]uint32
	}

	// NewDeviceRoutes creates device graph instance
	func NewDeviceRoutes(logicalDeviceID, rootDeviceID string, deviceMgr listDevicePortsFunc) *DeviceRoutes {
	return &DeviceRoutes{
	logicalDeviceID: logicalDeviceID,
	rootDeviceID: rootDeviceID,
	listDevicePorts: deviceMgr,
	RootPorts: make(map[uint32]uint32),
	Routes: make(map[PathID][]Hop),
	devicesPonPorts: make(map[string][]*voltha.Port),
	childConnectionPort: make(map[string]uint32),
	logicalPorts: make(map[uint32]*voltha.LogicalPort),
	}
	}

	//IsRootPort returns true if the port is a root port on a logical device
	func (dr *DeviceRoutes) IsRootPort(port uint32) bool {
	dr.rootPortsLock.RLock()
	defer dr.rootPortsLock.RUnlock()
	_, exist := dr.RootPorts[port]
	return exist
	}

	func (dr *DeviceRoutes) GetRoute(ctx context.Context, ingress, egress uint32) ([]Hop, error) {
	dr.routeBuildLock.Lock()
	defer dr.routeBuildLock.Unlock()

	if route, exist := dr.Routes[PathID{Ingress: ingress, Egress: egress}]; exist {
	return route, nil
	}

	uniPort, nniPort, err := dr.getLogicalPorts(ingress, egress)
	if err != nil {
	return nil, fmt.Errorf("no route from:%d to:%d %w", ingress, egress, err)
	}

	childPonPort, err := dr.getChildPonPort(ctx, uniPort.DeviceId)
	if err != nil {
	return nil, err
	}
	rootDevicePonPort, err := dr.getParentPonPort(ctx, uniPort.DeviceId)
	if err != nil {
	return nil, err
	}

	dr.Routes[PathID{Ingress: nniPort.OfpPort.PortNo, Egress: uniPort.DevicePortNo}] = []Hop{
	{DeviceID: nniPort.DeviceId, Ingress: nniPort.DevicePortNo, Egress: rootDevicePonPort},
	{DeviceID: uniPort.DeviceId, Ingress: childPonPort, Egress: uniPort.DevicePortNo},
	}
	dr.Routes[PathID{Ingress: uniPort.DevicePortNo, Egress: nniPort.OfpPort.PortNo}] = getReverseRoute(
	dr.Routes[PathID{Ingress: nniPort.OfpPort.PortNo, Egress: uniPort.DevicePortNo}])

	return dr.Routes[PathID{Ingress: ingress, Egress: egress}], nil

	}

	//ComputeRoutes calculates all the routes between the logical ports. This will clear up any existing route
	func (dr DeviceRoutes) ComputeRoutes(ctx context.Context, lps map[uint32]voltha.LogicalPort) error {
	dr.routeBuildLock.Lock()
	defer dr.routeBuildLock.Unlock()

	logger.Debugw(ctx, "computing-all-routes", log.Fields{"len-logical-ports": len(lps)})
	var err error
	defer func() {
	// On error, clear the routes - any flow request or a port add/delete will trigger the rebuild
	if err != nil {
	dr.reset()
	}
	}()

	if len(lps) < 2 {
	return fmt.Errorf("not enough logical port :%w", ErrNoRoute)
	}

	dr.reset()

	// Setup the physical ports to logical ports map, the nni ports as well as the root ports map
	physPortToLogicalPortMap := make(map[string]uint32)
	nniPorts := make([]*voltha.LogicalPort, 0)
	for _, lp := range lps {
	physPortToLogicalPortMap[concatDeviceIDPortID(lp.DeviceId, lp.DevicePortNo)] = lp.OfpPort.PortNo
	if lp.RootPort {
	nniPorts = append(nniPorts, lp)
	dr.RootPorts[lp.OfpPort.PortNo] = lp.OfpPort.PortNo
	}
	dr.logicalPorts[lp.OfpPort.PortNo] = lp
	}

	if len(nniPorts) == 0 {
	return fmt.Errorf("no nni port :%w", ErrNoRoute)
	}
	var copyFromNNIPort *voltha.LogicalPort
	for idx, nniPort := range nniPorts {
	if idx == 0 {
	copyFromNNIPort = nniPort
	} else if len(dr.Routes) > 0 {
	dr.copyFromExistingNNIRoutes(nniPort, copyFromNNIPort)
	return nil
	}
	// Get root device
	rootDeviceID := nniPort.DeviceId
	rootDevicePorts, err := dr.getDeviceWithCacheUpdate(ctx, nniPort.DeviceId)
	if err != nil {
	return err
	}
	if len(rootDevicePorts) == 0 {
	err = status.Errorf(codes.FailedPrecondition, "no-port-%s", rootDeviceID)
	return err
	}
	for _, rootDevicePort := range rootDevicePorts {
	if rootDevicePort.Type == voltha.Port_PON_OLT {
	logger.Debugw(ctx, "peers", log.Fields{"root-device-id": rootDeviceID, "port-no": rootDevicePort.PortNo, "len-peers": len(rootDevicePort.Peers)})
	for _, rootDevicePeer := range rootDevicePort.Peers {
	childDeviceID := rootDevicePeer.DeviceId
	childDevicePorts, err := dr.getDeviceWithCacheUpdate(ctx, rootDevicePeer.DeviceId)
	if err != nil {
	return err
	}
	childPonPort, err := dr.getChildPonPort(ctx, childDeviceID)
	if err != nil {
	return err
	}
	for _, childDevicePort := range childDevicePorts {
	if childDevicePort.Type == voltha.Port_ETHERNET_UNI {
	childLogicalPort, exist := physPortToLogicalPortMap[concatDeviceIDPortID(childDeviceID, childDevicePort.PortNo)]
	if !exist {
	// This can happen if this logical port has not been created yet for that device
	continue
	}
	dr.Routes[PathID{Ingress: nniPort.OfpPort.PortNo, Egress: childLogicalPort}] = []Hop{
	{DeviceID: rootDeviceID, Ingress: nniPort.DevicePortNo, Egress: rootDevicePort.PortNo},
	{DeviceID: childDeviceID, Ingress: childPonPort, Egress: childDevicePort.PortNo},
	}
	dr.Routes[PathID{Ingress: childLogicalPort, Egress: nniPort.OfpPort.PortNo}] = getReverseRoute(
	dr.Routes[PathID{Ingress: nniPort.OfpPort.PortNo, Egress: childLogicalPort}])
	}
	}
	}
	}
	}
	}
	return nil
	}

	// AddPort augments the current set of routes with new routes corresponding to the logical port "lp". If the routes have
	// not been built yet then use logical port "lps" to compute all current routes (lps includes lp)
	func (dr DeviceRoutes) AddPort(ctx context.Context, lp voltha.LogicalPort, deviceID string, devicePorts map[uint32]voltha.Port, lps map[uint32]voltha.LogicalPort) error {
	logger.Debugw(ctx, "add-port-to-routes", log.Fields{"port": lp, "count-logical-ports": len(lps)})

	// Adding NNI port
	if lp.RootPort {
	return dr.AddNNIPort(ctx, lp, deviceID, devicePorts, lps)
	}

	// Adding UNI port
	return dr.AddUNIPort(ctx, lp, deviceID, devicePorts, lps)
	}

	// AddUNIPort setup routes between the logical UNI port lp and all registered NNI ports
	func (dr DeviceRoutes) AddUNIPort(ctx context.Context, lp voltha.LogicalPort, deviceID string, devicePorts map[uint32]voltha.Port, lps map[uint32]voltha.LogicalPort) error {
	logger.Debugw(ctx, "add-uni-port-to-routes", log.Fields{"port": lp, "count-logical-ports": len(lps)})

	dr.routeBuildLock.Lock()
	defer dr.routeBuildLock.Unlock()

	// Add port to logical ports
	dr.logicalPorts[lp.OfpPort.PortNo] = lp

	// Update internal structures with device data
	dr.updateCache(deviceID, devicePorts)

	// Adding a UNI port
	childPonPort, err := dr.getChildPonPort(ctx, lp.DeviceId)
	if err != nil {
	return err
	}
	rootDevicePonPort, err := dr.getParentPonPort(ctx, deviceID)
	if err != nil {
	return err
	}

	// Adding a UNI port
	for _, lPort := range lps {
	if lPort.RootPort {
	dr.Routes[PathID{Ingress: lPort.OfpPort.PortNo, Egress: lp.OfpPort.PortNo}] = []Hop{
	{DeviceID: lPort.DeviceId, Ingress: lPort.DevicePortNo, Egress: rootDevicePonPort},
	{DeviceID: lp.DeviceId, Ingress: childPonPort, Egress: lp.DevicePortNo},
	}
	dr.Routes[PathID{Ingress: lp.OfpPort.PortNo, Egress: lPort.OfpPort.PortNo}] = getReverseRoute(
	dr.Routes[PathID{Ingress: lPort.OfpPort.PortNo, Egress: lp.OfpPort.PortNo}])
	}
	}
	return nil
	}

	// AddNNIPort setup routes between the logical NNI port lp and all registered UNI ports
	func (dr DeviceRoutes) AddNNIPort(ctx context.Context, lp voltha.LogicalPort, deviceID string, devicePorts map[uint32]voltha.Port, lps map[uint32]voltha.LogicalPort) error {
	logger.Debugw(ctx, "add-port-to-routes", log.Fields{"port": lp, "logical-ports-count": len(lps), "device-id": deviceID})

	dr.routeBuildLock.Lock()
	defer dr.routeBuildLock.Unlock()

	// Update internal structures with device data
	dr.updateCache(deviceID, devicePorts)

	// Setup the physical ports to logical ports map, the nni ports as well as the root ports map
	physPortToLogicalPortMap := make(map[string]uint32)
	for _, lp := range lps {
	physPortToLogicalPortMap[concatDeviceIDPortID(lp.DeviceId, lp.DevicePortNo)] = lp.OfpPort.PortNo
	if lp.RootPort {
	dr.rootPortsLock.Lock()
	dr.RootPorts[lp.OfpPort.PortNo] = lp.OfpPort.PortNo
	dr.rootPortsLock.Unlock()
	}
	dr.logicalPorts[lp.OfpPort.PortNo] = lp
	}

	for _, rootDevicePort := range devicePorts {
	if rootDevicePort.Type == voltha.Port_PON_OLT {
	logger.Debugw(ctx, "peers", log.Fields{"root-device-id": deviceID, "port-no": rootDevicePort.PortNo, "len-peers": len(rootDevicePort.Peers)})
	for _, rootDevicePeer := range rootDevicePort.Peers {
	childDeviceID := rootDevicePeer.DeviceId
	childDevicePorts, err := dr.getDeviceWithCacheUpdate(ctx, rootDevicePeer.DeviceId)
	if err != nil {
	continue
	}

	childPonPort, err := dr.getChildPonPort(ctx, childDeviceID)
	if err != nil {
	continue
	}

	for _, childDevicePort := range childDevicePorts {
	childLogicalPort, exist := physPortToLogicalPortMap[concatDeviceIDPortID(childDeviceID, childDevicePort.PortNo)]
	if !exist {
	// This can happen if this logical port has not been created yet for that device
	continue
	}

	if childDevicePort.Type == voltha.Port_ETHERNET_UNI {
	dr.Routes[PathID{Ingress: lp.OfpPort.PortNo, Egress: childLogicalPort}] = []Hop{
	{DeviceID: deviceID, Ingress: lp.DevicePortNo, Egress: rootDevicePort.PortNo},
	{DeviceID: childDeviceID, Ingress: childPonPort, Egress: childDevicePort.PortNo},
	}
	dr.Routes[PathID{Ingress: childLogicalPort, Egress: lp.OfpPort.PortNo}] = getReverseRoute(
	dr.Routes[PathID{Ingress: lp.OfpPort.PortNo, Egress: childLogicalPort}])
	}
	}
	}
	}
	}
	return nil
	}

	// AddAllPorts setups up new routes using all ports on the device. lps includes the device's logical port
	func (dr DeviceRoutes) AddAllPorts(ctx context.Context, deviceID string, devicePorts map[uint32]voltha.Port, lps map[uint32]*voltha.LogicalPort) error {
	logger.Debugw(ctx, "add-all-port-to-routes", log.Fields{"logical-ports-count": len(lps), "device-id": deviceID})
	for _, lp := range lps {
	if lp.DeviceId == deviceID {
	if err := dr.AddPort(ctx, lp, deviceID, devicePorts, lps); err != nil {
	return err
	}
	}
	}
	return nil
	}

	// Print prints routes
	func (dr *DeviceRoutes) Print(ctx context.Context) error {
	dr.routeBuildLock.RLock()
	defer dr.routeBuildLock.RUnlock()
	logger.Debugw(ctx, "Print", log.Fields{"logical-device-id": dr.logicalDeviceID, "logical-ports": dr.logicalPorts})
	if logger.V(log.DebugLevel) {
	output := ""
	routeNumber := 1
	for k, v := range dr.Routes {
	key := fmt.Sprintf("LP:%d->LP:%d", k.Ingress, k.Egress)
	val := ""
	for _, i := range v {
	val += fmt.Sprintf("{%d->%s->%d},", i.Ingress, i.DeviceID, i.Egress)
	}
	val = val[:len(val)-1]
	output += fmt.Sprintf("%d:{%s=>%s} ", routeNumber, key, fmt.Sprintf("[%s]", val))
	routeNumber++
	}
	if len(dr.Routes) == 0 {
	logger.Debugw(ctx, "no-routes-found", log.Fields{"logical-device-id": dr.logicalDeviceID})
	} else {
	logger.Debugw(ctx, "graph_routes", log.Fields{"logical-device-id": dr.logicalDeviceID, "Routes": output})
	}
	}
	return nil
	}

	// isUpToDate returns true if device is up to date
	func (dr DeviceRoutes) isUpToDate(ldPorts map[uint32]voltha.LogicalPort) bool {
	dr.routeBuildLock.Lock()
	defer dr.routeBuildLock.Unlock()
	numNNI, numUNI := 0, 0
	if ldPorts != nil {
	if len(dr.logicalPorts) != len(ldPorts) {
	return false
	}
	numNNI = len(dr.RootPorts)
	numUNI = len(ldPorts) - numNNI
	}
	return len(dr.Routes) == numNNInumUNI2
	}

	// IsRoutesEmpty returns true if there are no routes
	func (dr *DeviceRoutes) IsRoutesEmpty() bool {
	dr.routeBuildLock.RLock()
	defer dr.routeBuildLock.RUnlock()
	return len(dr.Routes) == 0
	}

	// GetHalfRoute returns a half route that has only the egress hop set or the ingress hop set
	func (dr *DeviceRoutes) GetHalfRoute(nniAsEgress bool, ingress, egress uint32) ([]Hop, error) {
	dr.routeBuildLock.RLock()
	defer dr.routeBuildLock.RUnlock()
	routes := make([]Hop, 0)
	for routeLink, path := range dr.Routes {
	// If nniAsEgress is set then the half route will only have the egress hop set where the egress port needs to be
	// an NNI port
	if nniAsEgress {
	// Prioritize a specific egress NNI port if set
	if egress != 0 && dr.IsRootPort(egress) && routeLink.Egress == egress {
	routes = append(routes, Hop{})
	routes = append(routes, path[1])
	return routes, nil
	}
	if egress == 0 && dr.IsRootPort(routeLink.Egress) {
	routes = append(routes, Hop{})
	routes = append(routes, path[1])
	return routes, nil
	}
	} else {
	// Here we use the first route whose ingress port matches the ingress input parameter
	if ingress != 0 && routeLink.Ingress == ingress {
	routes = append(routes, path[0])
	routes = append(routes, Hop{})
	return routes, nil
	}
	}
	}
	return routes, fmt.Errorf("no half route found for ingress port %d, egress port %d and nni as egress %t", ingress, egress, nniAsEgress)
	}

	//getDeviceWithCacheUpdate returns the from the model and updates the PON ports map of that device.
	func (dr DeviceRoutes) getDeviceWithCacheUpdate(ctx context.Context, deviceID string) (map[uint32]voltha.Port, error) {
	devicePorts, err := dr.listDevicePorts(ctx, deviceID)
	if err != nil {
	logger.Errorw(ctx, "device-not-found", log.Fields{"device-id": deviceID, "error": err})
	return nil, err
	}
	dr.updateCache(deviceID, devicePorts)
	return devicePorts, nil
	}

	//copyFromExistingNNIRoutes copies routes from an existing set of NNI routes
	func (dr DeviceRoutes) copyFromExistingNNIRoutes(newNNIPort voltha.LogicalPort, copyFromNNIPort *voltha.LogicalPort) {
	updatedRoutes := make(map[PathID][]Hop)
	for key, val := range dr.Routes {
	if key.Ingress == copyFromNNIPort.OfpPort.PortNo {
	updatedRoutes[PathID{Ingress: newNNIPort.OfpPort.PortNo, Egress: key.Egress}] = []Hop{
	{DeviceID: newNNIPort.DeviceId, Ingress: newNNIPort.DevicePortNo, Egress: val[0].Egress},
	val[1],
	}
	}
	if key.Egress == copyFromNNIPort.OfpPort.PortNo {
	updatedRoutes[PathID{Ingress: key.Ingress, Egress: newNNIPort.OfpPort.PortNo}] = []Hop{
	val[0],
	{DeviceID: newNNIPort.DeviceId, Ingress: val[1].Ingress, Egress: newNNIPort.DevicePortNo},
	}
	}
	updatedRoutes[key] = val
	}
	dr.Routes = updatedRoutes
	}

	// reset cleans up the device graph
	func (dr *DeviceRoutes) reset() {
	dr.rootPortsLock.Lock()
	dr.RootPorts = make(map[uint32]uint32)
	dr.rootPortsLock.Unlock()
	dr.Routes = make(map[PathID][]Hop)
	dr.logicalPorts = make(map[uint32]*voltha.LogicalPort)
	dr.devicesPonPorts = make(map[string][]*voltha.Port)
	dr.childConnectionPort = make(map[string]uint32)
	}

	//concatDeviceIdPortId formats a portid using the device id and the port number
	func concatDeviceIDPortID(deviceID string, portNo uint32) string {
	return fmt.Sprintf("%s:%d", deviceID, portNo)
	}

	//getReverseRoute returns the reverse of the route
	func getReverseRoute(route []Hop) []Hop {
	reverse := make([]Hop, len(route))
	for i, j := 0, len(route)-1; j >= 0; i, j = i+1, j-1 {
	reverse[i].DeviceID, reverse[i].Ingress, reverse[i].Egress = route[j].DeviceID, route[j].Egress, route[j].Ingress
	}
	return reverse
	}

	// getChildPonPort returns the child PON port number either from cache or from the model. If it is from the model then
	// it updates the PON ports map of that device.
	func (dr *DeviceRoutes) getChildPonPort(ctx context.Context, deviceID string) (uint32, error) {
	if port, exist := dr.devicesPonPorts[deviceID]; exist {
	// Return only the first PON port of that child device
	return port[0].PortNo, nil
	}

	// Get child device from model
	if _, err := dr.getDeviceWithCacheUpdate(ctx, deviceID); err != nil {
	logger.Errorw(ctx, "device-not-found", log.Fields{"device-id": deviceID, "error": err})
	return 0, err
	}

	// Try again
	if port, exist := dr.devicesPonPorts[deviceID]; exist {
	// Return only the first PON port of that child device
	return port[0].PortNo, nil
	}

	return 0, fmt.Errorf("pon port not found %s", deviceID)
	}

	// getParentPonPort returns the parent PON port of the child device
	func (dr *DeviceRoutes) getParentPonPort(ctx context.Context, childDeviceID string) (uint32, error) {
	if pNo, exist := dr.childConnectionPort[childDeviceID]; exist {
	return pNo, nil
	}

	// Get parent device from the model
	if _, err := dr.getDeviceWithCacheUpdate(ctx, dr.rootDeviceID); err != nil {
	logger.Errorw(ctx, "device-not-found", log.Fields{"device-id": dr.rootDeviceID, "error": err})
	return 0, err
	}
	// Try again
	if pNo, exist := dr.childConnectionPort[childDeviceID]; exist {
	return pNo, nil
	}
	return 0, fmt.Errorf("pon port associated with child device %s not found", childDeviceID)
	}

	func (dr DeviceRoutes) updateCache(deviceID string, devicePorts map[uint32]voltha.Port) {
	for _, port := range devicePorts {
	if port.Type == voltha.Port_PON_ONU \|\| port.Type == voltha.Port_PON_OLT {
	dr.devicesPonPorts[deviceID] = append(dr.devicesPonPorts[deviceID], port)
	for _, peer := range port.Peers {
	if port.Type == voltha.Port_PON_ONU {
	dr.childConnectionPort[port.DeviceId] = peer.PortNo
	} else {
	dr.childConnectionPort[peer.DeviceId] = port.PortNo
	}
	}
	}
	}
	}

	func (dr DeviceRoutes) getLogicalPorts(ingress, egress uint32) (uniPort, nniPort voltha.LogicalPort, err error) {
	inPort, exist := dr.logicalPorts[ingress]
	if !exist {
	err = fmt.Errorf("ingress port %d not found", ingress)
	return
	}
	outPort, exist := dr.logicalPorts[egress]
	if !exist {
	err = fmt.Errorf("egress port %d not found", egress)
	return
	}

	if inPort.RootPort {
	nniPort = inPort
	uniPort = outPort
	} else {
	nniPort = outPort
	uniPort = inPort
	}

	return
	}