| #!/usr/bin/env python |
| # |
| # Copyright 2016 the original author or authors. |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| """ |
| Device level CLI commands |
| """ |
| from optparse import make_option |
| from cmd2 import Cmd, options |
| from simplejson import dumps |
| |
| from table import print_pb_as_table, print_pb_list_as_table |
| from utils import print_flows, pb2dict, enum2name |
| from python.protos import third_party |
| |
| _ = third_party |
| from python.protos import voltha_pb2, common_pb2 |
| import sys |
| import json |
| from google.protobuf.json_format import MessageToDict |
| |
| # Since proto3 won't send fields that are set to 0/false/"" any object that |
| # might have those values set in them needs to be replicated here such that the |
| # fields can be adequately |
| |
| |
| class DeviceCli(Cmd): |
| |
| def __init__(self, device_id, get_stub): |
| Cmd.__init__(self) |
| self.get_stub = get_stub |
| self.device_id = device_id |
| self.prompt = '(' + self.colorize( |
| self.colorize('device {}'.format(device_id), 'red'), 'bold') + ') ' |
| self.pm_config_last = None |
| self.pm_config_dirty = False |
| |
| def cmdloop(self): |
| self._cmdloop() |
| |
| def get_device(self, depth=0): |
| stub = self.get_stub() |
| res = stub.GetDevice(voltha_pb2.ID(id=self.device_id), |
| metadata=(('get-depth', str(depth)), )) |
| return res |
| |
| do_exit = Cmd.do_quit |
| |
| def do_quit(self, line): |
| if self.pm_config_dirty: |
| self.poutput("Uncommited changes for " + \ |
| self.colorize( |
| self.colorize("perf_config,", "blue"), |
| "bold") + " please either " + self.colorize( |
| self.colorize("commit", "blue"), "bold") + \ |
| " or " + self.colorize( |
| self.colorize("reset", "blue"), "bold") + \ |
| " your changes using " + \ |
| self.colorize( |
| self.colorize("perf_config", "blue"), "bold")) |
| return False |
| else: |
| return self._STOP_AND_EXIT |
| |
| def do_show(self, line): |
| """Show detailed device information""" |
| print_pb_as_table('Device {}'.format(self.device_id), |
| self.get_device(depth=-1)) |
| |
| def do_ports(self, line): |
| """Show ports of device""" |
| device = self.get_device(depth=-1) |
| omit_fields = { |
| } |
| print_pb_list_as_table('Device ports:', device.ports, |
| omit_fields, self.poutput) |
| |
| def complete_perf_config(self, text, line, begidx, endidx): |
| sub_cmds = {"show", "set", "commit", "reset"} |
| sub_opts = {"-f", "-e", "-d", "-o"} |
| # Help the interpreter complete the paramters. |
| completions = [] |
| if not self.pm_config_last: |
| device = self.get_device(depth=-1) |
| self.pm_config_last = device.pm_configs |
| m_names = [d.name for d in self.pm_config_last.metrics] |
| cur_cmd = line.strip().split(" ") |
| try: |
| if not text and len(cur_cmd) == 1: |
| completions = ("show", "set", "commit", "reset") |
| elif len(cur_cmd) == 2: |
| if "set" == cur_cmd[1]: |
| completions = [d for d in sub_opts] |
| else: |
| completions = [d for d in sub_cmds if d.startswith(text)] |
| elif len(cur_cmd) > 2 and cur_cmd[1] == "set": |
| if cur_cmd[len(cur_cmd)-1] == "-": |
| completions = [list(d)[1] for d in sub_opts] |
| elif cur_cmd[len(cur_cmd)-1] == "-f": |
| completions = ("\255","Please enter a sampling frequency in 10ths of a second") |
| elif cur_cmd[len(cur_cmd)-2] == "-f": |
| completions = [d for d in sub_opts] |
| elif cur_cmd[len(cur_cmd)-1] in {"-e","-d","-o"}: |
| if self.pm_config_last.grouped: |
| pass |
| else: |
| completions = [d.name for d in self.pm_config_last.metrics] |
| elif cur_cmd[len(cur_cmd)-2] in {"-e","-d"}: |
| if text and text not in m_names: |
| completions = [d for d in m_names if d.startswith(text)] |
| else: |
| completions = [d for d in sub_opts] |
| elif cur_cmd[len(cur_cmd)-2] == "-o": |
| if cur_cmd[len(cur_cmd)-1] in [d.name for d in self.pm_config_last.metrics]: |
| completions = ("\255","Please enter a sampling frequency in 10ths of a second") |
| else: |
| completions = [d for d in m_names if d.startswith(text)] |
| elif cur_cmd[len(cur_cmd)-3] == "-o": |
| completions = [d for d in sub_opts] |
| except: |
| e = sys.exc_info() |
| print(e) |
| return completions |
| |
| |
| def help_perf_config(self): |
| self.poutput( |
| ''' |
| perf_config [show | set | commit | reset] [-f <default frequency>] [{-e <metric/group |
| name>}] [{-d <metric/group name>}] [{-o <metric/group name> <override |
| frequency>}] |
| |
| show: displays the performance configuration of the device |
| set: changes the parameters specified with -e, -d, and -o |
| reset: reverts any changes made since the last commit |
| commit: commits any changes made which applies them to the device. |
| |
| -e: enable collection of the specified metric, more than one -e may be |
| specified. |
| -d: disable collection of the specified metric, more than on -d may be |
| specified. |
| -o: override the collection frequency of the specified metric, more than one -o |
| may be specified. Note that -o isn't valid unless |
| frequency_override is set to True for the device. |
| |
| Changes made by set are held locally until a commit or reset command is issued. |
| A commit command will write the configuration to the device and it takes effect |
| immediately. The reset command will undo any changes since the start of the |
| device session. |
| |
| If grouped is true then the -d, -e and -o commands refer to groups and not |
| individual metrics. |
| ''' |
| ) |
| |
| @options([ |
| make_option('-f', '--default_freq', action="store", dest='default_freq', |
| type='long', default=None), |
| make_option('-e', '--enable', action='append', dest='enable', |
| default=None), |
| make_option('-d', '--disable', action='append', dest='disable', |
| default=None), |
| make_option('-o', '--override', action='append', dest='override', |
| nargs=2, default=None, type='string'), |
| ]) |
| def do_perf_config(self, line, opts): |
| """Show and set the performance monitoring configuration of the device""" |
| |
| device = self.get_device(depth=-1) |
| if not self.pm_config_last: |
| self.pm_config_last = device.pm_configs |
| |
| # Ensure that a valid sub-command was provided |
| if line.strip() not in {"set", "show", "commit", "reset", ""}: |
| self.poutput(self.colorize('Error: ', 'red') + |
| self.colorize(self.colorize(line.strip(), 'blue'), |
| 'bold') + ' is not recognized') |
| return |
| |
| # Ensure no options are provided when requesting to view the config |
| if line.strip() == "show" or line.strip() == "": |
| if opts.default_freq or opts.enable or opts.disable: |
| self.poutput(opts.disable) |
| self.poutput(self.colorize('Error: ', 'red') + 'use ' + |
| self.colorize(self.colorize('"set"', 'blue'), |
| 'bold') + ' to change settings') |
| return |
| |
| if line.strip() == "set": # Set the supplied values |
| metric_list = set() |
| if opts.enable is not None: |
| metric_list |= {metric for metric in opts.enable} |
| if opts.disable is not None: |
| metric_list |= {metric for metric in opts.disable} |
| if opts.override is not None: |
| metric_list |= {metric for metric, _ in opts.override} |
| |
| # The default frequency |
| if opts.default_freq: |
| self.pm_config_last.default_freq = opts.default_freq |
| self.pm_config_dirty = True |
| |
| # Field or group visibility |
| if self.pm_config_last.grouped: |
| for g in self.pm_config_last.groups: |
| if opts.enable: |
| if g.group_name in opts.enable: |
| g.enabled = True |
| self.pm_config_dirty = True |
| metric_list.discard(g.group_name) |
| for g in self.pm_config_last.groups: |
| if opts.disable: |
| if g.group_name in opts.disable: |
| g.enabled = False |
| self.pm_config_dirty = True |
| metric_list.discard(g.group_name) |
| else: |
| for m in self.pm_config_last.metrics: |
| if opts.enable: |
| if m.name in opts.enable: |
| m.enabled = True |
| self.pm_config_dirty = True |
| metric_list.discard(m.name) |
| for m in self.pm_config_last.metrics: |
| if opts.disable: |
| if m.name in opts.disable: |
| m.enabled = False |
| self.pm_config_dirty = True |
| metric_list.discard(m.name) |
| |
| # Frequency overrides. |
| if opts.override: |
| if self.pm_config_last.freq_override: |
| oo = dict() |
| for o in opts.override: |
| oo[o[0]] = o[1] |
| if self.pm_config_last.grouped: |
| for g in self.pm_config_last.groups: |
| if g.group_name in oo: |
| try: |
| g.group_freq = int(oo[g.group_name]) |
| except ValueError: |
| self.poutput(self.colorize('Warning: ', |
| 'yellow') + |
| self.colorize(oo[g.group_name], |
| 'blue') + |
| " is not an integer... ignored") |
| del oo[g.group_name] |
| self.pm_config_dirty = True |
| metric_list.discard(g.group_name) |
| else: |
| for m in self.pm_config_last.metrics: |
| if m.name in oo: |
| try: |
| m.sample_freq = int(oo[m.name]) |
| except ValueError: |
| self.poutput(self.colorize('Warning: ', |
| 'yellow') + |
| self.colorize(oo[m.name], |
| 'blue') + |
| " is not an integer... ignored") |
| del oo[m.name] |
| self.pm_config_dirty = True |
| metric_list.discard(m.name) |
| |
| # If there's anything left the input was typoed |
| if self.pm_config_last.grouped: |
| field = 'group' |
| else: |
| field = 'metric' |
| for o in oo: |
| self.poutput(self.colorize('Warning: ', 'yellow') + |
| 'the parameter' + ' ' + |
| self.colorize(o, 'blue') + ' is not ' + |
| 'a ' + field + ' name... ignored') |
| if oo: |
| return |
| |
| else: # Frequency overrides not enabled |
| self.poutput(self.colorize('Error: ', 'red') + |
| 'Individual overrides are only ' + |
| 'supported if ' + |
| self.colorize('freq_override', 'blue') + |
| ' is set to ' + self.colorize('True', 'blue')) |
| return |
| |
| if len(metric_list): |
| metric_name_list = ", ".join(str(metric) for metric in metric_list) |
| self.poutput(self.colorize('Error: ', 'red') + |
| 'Metric/Metric Group{} '.format('s' if len(metric_list) > 1 else '') + |
| self.colorize(metric_name_list, 'blue') + |
| ' {} not found'.format('were' if len(metric_list) > 1 else 'was')) |
| return |
| |
| self.poutput("Success") |
| return |
| |
| elif line.strip() == "commit" and self.pm_config_dirty: |
| stub = self.get_stub() |
| stub.UpdateDevicePmConfigs(self.pm_config_last) |
| self.pm_config_last = self.get_device(depth=-1).pm_configs |
| self.pm_config_dirty = False |
| |
| elif line.strip() == "reset" and self.pm_config_dirty: |
| self.pm_config_last = self.get_device(depth=-1).pm_configs |
| self.pm_config_dirty = False |
| |
| omit_fields = {'groups', 'metrics', 'id'} |
| print_pb_as_table('PM Config:', self.pm_config_last, omit_fields, |
| self.poutput,show_nulls=True) |
| if self.pm_config_last.grouped: |
| #self.poutput("Supported metric groups:") |
| for g in self.pm_config_last.groups: |
| if self.pm_config_last.freq_override: |
| omit_fields = {'metrics'} |
| else: |
| omit_fields = {'group_freq','metrics'} |
| print_pb_as_table('', g, omit_fields, self.poutput, |
| show_nulls=True) |
| if g.enabled: |
| state = 'enabled' |
| else: |
| state = 'disabled' |
| print_pb_list_as_table( |
| 'Metric group {} is {}'.format(g.group_name,state), |
| g.metrics, {'enabled', 'sample_freq'}, self.poutput, |
| dividers=100, show_nulls=True) |
| else: |
| if self.pm_config_last.freq_override: |
| omit_fields = {} |
| else: |
| omit_fields = {'sample_freq'} |
| print_pb_list_as_table('Supported metrics:', self.pm_config_last.metrics, |
| omit_fields, self.poutput, dividers=100, |
| show_nulls=True) |
| |
| def do_flows(self, line): |
| """Show flow table for device""" |
| device = pb2dict(self.get_device(-1)) |
| print_flows( |
| 'Device', |
| self.device_id, |
| type=device['type'], |
| flows=device['flows']['items'], |
| groups=device['flow_groups']['items'] |
| ) |
| |
| def do_images(self, line): |
| """Show software images on the device""" |
| device = self.get_device(depth=-1) |
| omit_fields = {} |
| print_pb_list_as_table('Software Images:', device.images.image, |
| omit_fields, self.poutput, show_nulls=True) |
| |
| @options([ |
| make_option('-u', '--url', action='store', dest='url', |
| help="URL to get sw image"), |
| make_option('-n', '--name', action='store', dest='name', |
| help="Image name"), |
| make_option('-c', '--crc', action='store', dest='crc', |
| help="CRC code to verify with", default=0), |
| make_option('-v', '--version', action='store', dest='version', |
| help="Image version", default=0), |
| ]) |
| def do_img_dnld_request(self, line, opts): |
| """ |
| Request image download to a device |
| """ |
| device = self.get_device(depth=-1) |
| self.poutput('device_id {}'.format(device.id)) |
| self.poutput('name {}'.format(opts.name)) |
| self.poutput('url {}'.format(opts.url)) |
| self.poutput('crc {}'.format(opts.crc)) |
| self.poutput('version {}'.format(opts.version)) |
| try: |
| device_id = device.id |
| if device_id and opts.name and opts.url: |
| kw = dict(id=device_id) |
| kw['name'] = opts.name |
| kw['url'] = opts.url |
| else: |
| self.poutput('Device ID and URL are needed') |
| raise Exception('Device ID and URL are needed') |
| except Exception as e: |
| self.poutput('Error request img dnld {}. Error:{}'.format(device_id, e)) |
| return |
| kw['crc'] = long(opts.crc) |
| kw['image_version'] = opts.version |
| response = None |
| try: |
| request = voltha_pb2.ImageDownload(**kw) |
| stub = self.get_stub() |
| response = stub.DownloadImage(request) |
| except Exception as e: |
| self.poutput('Error download image {}. Error:{}'.format(kw['id'], e)) |
| return |
| name = enum2name(common_pb2.OperationResp, |
| 'OperationReturnCode', response.code) |
| self.poutput('response: {}'.format(name)) |
| self.poutput('{}'.format(response)) |
| |
| @options([ |
| make_option('-n', '--name', action='store', dest='name', |
| help="Image name"), |
| ]) |
| def do_img_dnld_status(self, line, opts): |
| """ |
| Get a image download status |
| """ |
| device = self.get_device(depth=-1) |
| self.poutput('device_id {}'.format(device.id)) |
| self.poutput('name {}'.format(opts.name)) |
| try: |
| device_id = device.id |
| if device_id and opts.name: |
| kw = dict(id=device_id) |
| kw['name'] = opts.name |
| else: |
| self.poutput('Device ID, Image Name are needed') |
| raise Exception('Device ID, Image Name are needed') |
| except Exception as e: |
| self.poutput('Error get img dnld status {}. Error:{}'.format(device_id, e)) |
| return |
| status = None |
| try: |
| img_dnld = voltha_pb2.ImageDownload(**kw) |
| stub = self.get_stub() |
| status = stub.GetImageDownloadStatus(img_dnld) |
| except Exception as e: |
| self.poutput('Error get img dnld status {}. Error:{}'.format(device_id, e)) |
| return |
| fields_to_omit = { |
| 'crc', |
| 'local_dir', |
| } |
| try: |
| print_pb_as_table('ImageDownload Status:', status, fields_to_omit, self.poutput) |
| except Exception, e: |
| self.poutput('Error {}. Error:{}'.format(device_id, e)) |
| |
| def do_img_dnld_list(self, line): |
| """ |
| List all image download records for a given device |
| """ |
| device = self.get_device(depth=-1) |
| device_id = device.id |
| self.poutput('Get all img dnld records {}'.format(device_id)) |
| try: |
| stub = self.get_stub() |
| img_dnlds = stub.ListImageDownloads(voltha_pb2.ID(id=device_id)) |
| except Exception, e: |
| self.poutput('Error list img dnlds {}. Error:{}'.format(device_id, e)) |
| return |
| fields_to_omit = { |
| 'crc', |
| 'local_dir', |
| } |
| try: |
| print_pb_list_as_table('ImageDownloads:', img_dnlds.items, fields_to_omit, self.poutput) |
| except Exception, e: |
| self.poutput('Error {}. Error:{}'.format(device_id, e)) |
| |
| |
| @options([ |
| make_option('-n', '--name', action='store', dest='name', |
| help="Image name"), |
| ]) |
| def do_img_dnld_cancel(self, line, opts): |
| """ |
| Cancel a requested image download |
| """ |
| device = self.get_device(depth=-1) |
| self.poutput('device_id {}'.format(device.id)) |
| self.poutput('name {}'.format(opts.name)) |
| device_id = device.id |
| try: |
| if device_id and opts.name: |
| kw = dict(id=device_id) |
| kw['name'] = opts.name |
| else: |
| self.poutput('Device ID, Image Name are needed') |
| raise Exception('Device ID, Image Name are needed') |
| except Exception as e: |
| self.poutput('Error cancel sw dnld {}. Error:{}'.format(device_id, e)) |
| return |
| response = None |
| try: |
| img_dnld = voltha_pb2.ImageDownload(**kw) |
| stub = self.get_stub() |
| img_dnld = stub.GetImageDownload(img_dnld) |
| response = stub.CancelImageDownload(img_dnld) |
| except Exception as e: |
| self.poutput('Error cancel sw dnld {}. Error:{}'.format(device_id, e)) |
| return |
| name = enum2name(common_pb2.OperationResp, |
| 'OperationReturnCode', response.code) |
| self.poutput('response: {}'.format(name)) |
| self.poutput('{}'.format(response)) |
| |
| @options([ |
| make_option('-n', '--name', action='store', dest='name', |
| help="Image name"), |
| make_option('-s', '--save', action='store', dest='save_config', |
| help="Save Config", default="True"), |
| make_option('-d', '--dir', action='store', dest='local_dir', |
| help="Image on device location"), |
| ]) |
| def do_img_activate(self, line, opts): |
| """ |
| Activate an image update on device |
| """ |
| device = self.get_device(depth=-1) |
| device_id = device.id |
| try: |
| if device_id and opts.name and opts.local_dir: |
| kw = dict(id=device_id) |
| kw['name'] = opts.name |
| kw['local_dir'] = opts.local_dir |
| else: |
| self.poutput('Device ID, Image Name, and Location are needed') |
| raise Exception('Device ID, Image Name, and Location are needed') |
| except Exception as e: |
| self.poutput('Error activate image {}. Error:{}'.format(device_id, e)) |
| return |
| kw['save_config'] = json.loads(opts.save_config.lower()) |
| self.poutput('activate image update {} {} {} {}'.format( \ |
| kw['id'], kw['name'], |
| kw['local_dir'], kw['save_config'])) |
| response = None |
| try: |
| img_dnld = voltha_pb2.ImageDownload(**kw) |
| stub = self.get_stub() |
| img_dnld = stub.GetImageDownload(img_dnld) |
| response = stub.ActivateImageUpdate(img_dnld) |
| except Exception as e: |
| self.poutput('Error activate image {}. Error:{}'.format(kw['id'], e)) |
| return |
| name = enum2name(common_pb2.OperationResp, |
| 'OperationReturnCode', response.code) |
| self.poutput('response: {}'.format(name)) |
| self.poutput('{}'.format(response)) |
| |
| @options([ |
| make_option('-n', '--name', action='store', dest='name', |
| help="Image name"), |
| make_option('-s', '--save', action='store', dest='save_config', |
| help="Save Config", default="True"), |
| make_option('-d', '--dir', action='store', dest='local_dir', |
| help="Image on device location"), |
| ]) |
| def do_img_revert(self, line, opts): |
| """ |
| Revert an image update on device |
| """ |
| device = self.get_device(depth=-1) |
| device_id = device.id |
| try: |
| if device_id and opts.name and opts.local_dir: |
| kw = dict(id=device_id) |
| kw['name'] = opts.name |
| kw['local_dir'] = opts.local_dir |
| else: |
| self.poutput('Device ID, Image Name, and Location are needed') |
| raise Exception('Device ID, Image Name, and Location are needed') |
| except Exception as e: |
| self.poutput('Error revert image {}. Error:{}'.format(device_id, e)) |
| return |
| kw['save_config'] = json.loads(opts.save_config.lower()) |
| self.poutput('revert image update {} {} {} {}'.format( \ |
| kw['id'], kw['name'], |
| kw['local_dir'], kw['save_config'])) |
| response = None |
| try: |
| img_dnld = voltha_pb2.ImageDownload(**kw) |
| stub = self.get_stub() |
| img_dnld = stub.GetImageDownload(img_dnld) |
| response = stub.RevertImageUpdate(img_dnld) |
| except Exception as e: |
| self.poutput('Error revert image {}. Error:{}'.format(kw['id'], e)) |
| return |
| name = enum2name(common_pb2.OperationResp, |
| 'OperationReturnCode', response.code) |
| self.poutput('response: {}'.format(name)) |
| self.poutput('{}'.format(response)) |