[VOL-1386] This commit add "dep" as the package management tool
for voltha-go.
Change-Id: I52bc4911dd00a441756ec7c30f46d45091f3f90e
diff --git a/vendor/golang.org/x/net/http2/server.go b/vendor/golang.org/x/net/http2/server.go
new file mode 100644
index 0000000..b57b6e2
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/server.go
@@ -0,0 +1,2901 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// TODO: turn off the serve goroutine when idle, so
+// an idle conn only has the readFrames goroutine active. (which could
+// also be optimized probably to pin less memory in crypto/tls). This
+// would involve tracking when the serve goroutine is active (atomic
+// int32 read/CAS probably?) and starting it up when frames arrive,
+// and shutting it down when all handlers exit. the occasional PING
+// packets could use time.AfterFunc to call sc.wakeStartServeLoop()
+// (which is a no-op if already running) and then queue the PING write
+// as normal. The serve loop would then exit in most cases (if no
+// Handlers running) and not be woken up again until the PING packet
+// returns.
+
+// TODO (maybe): add a mechanism for Handlers to going into
+// half-closed-local mode (rw.(io.Closer) test?) but not exit their
+// handler, and continue to be able to read from the
+// Request.Body. This would be a somewhat semantic change from HTTP/1
+// (or at least what we expose in net/http), so I'd probably want to
+// add it there too. For now, this package says that returning from
+// the Handler ServeHTTP function means you're both done reading and
+// done writing, without a way to stop just one or the other.
+
+package http2
+
+import (
+ "bufio"
+ "bytes"
+ "context"
+ "crypto/tls"
+ "errors"
+ "fmt"
+ "io"
+ "log"
+ "math"
+ "net"
+ "net/http"
+ "net/textproto"
+ "net/url"
+ "os"
+ "reflect"
+ "runtime"
+ "strconv"
+ "strings"
+ "sync"
+ "time"
+
+ "golang.org/x/net/http/httpguts"
+ "golang.org/x/net/http2/hpack"
+)
+
+const (
+ prefaceTimeout = 10 * time.Second
+ firstSettingsTimeout = 2 * time.Second // should be in-flight with preface anyway
+ handlerChunkWriteSize = 4 << 10
+ defaultMaxStreams = 250 // TODO: make this 100 as the GFE seems to?
+)
+
+var (
+ errClientDisconnected = errors.New("client disconnected")
+ errClosedBody = errors.New("body closed by handler")
+ errHandlerComplete = errors.New("http2: request body closed due to handler exiting")
+ errStreamClosed = errors.New("http2: stream closed")
+)
+
+var responseWriterStatePool = sync.Pool{
+ New: func() interface{} {
+ rws := &responseWriterState{}
+ rws.bw = bufio.NewWriterSize(chunkWriter{rws}, handlerChunkWriteSize)
+ return rws
+ },
+}
+
+// Test hooks.
+var (
+ testHookOnConn func()
+ testHookGetServerConn func(*serverConn)
+ testHookOnPanicMu *sync.Mutex // nil except in tests
+ testHookOnPanic func(sc *serverConn, panicVal interface{}) (rePanic bool)
+)
+
+// Server is an HTTP/2 server.
+type Server struct {
+ // MaxHandlers limits the number of http.Handler ServeHTTP goroutines
+ // which may run at a time over all connections.
+ // Negative or zero no limit.
+ // TODO: implement
+ MaxHandlers int
+
+ // MaxConcurrentStreams optionally specifies the number of
+ // concurrent streams that each client may have open at a
+ // time. This is unrelated to the number of http.Handler goroutines
+ // which may be active globally, which is MaxHandlers.
+ // If zero, MaxConcurrentStreams defaults to at least 100, per
+ // the HTTP/2 spec's recommendations.
+ MaxConcurrentStreams uint32
+
+ // MaxReadFrameSize optionally specifies the largest frame
+ // this server is willing to read. A valid value is between
+ // 16k and 16M, inclusive. If zero or otherwise invalid, a
+ // default value is used.
+ MaxReadFrameSize uint32
+
+ // PermitProhibitedCipherSuites, if true, permits the use of
+ // cipher suites prohibited by the HTTP/2 spec.
+ PermitProhibitedCipherSuites bool
+
+ // IdleTimeout specifies how long until idle clients should be
+ // closed with a GOAWAY frame. PING frames are not considered
+ // activity for the purposes of IdleTimeout.
+ IdleTimeout time.Duration
+
+ // MaxUploadBufferPerConnection is the size of the initial flow
+ // control window for each connections. The HTTP/2 spec does not
+ // allow this to be smaller than 65535 or larger than 2^32-1.
+ // If the value is outside this range, a default value will be
+ // used instead.
+ MaxUploadBufferPerConnection int32
+
+ // MaxUploadBufferPerStream is the size of the initial flow control
+ // window for each stream. The HTTP/2 spec does not allow this to
+ // be larger than 2^32-1. If the value is zero or larger than the
+ // maximum, a default value will be used instead.
+ MaxUploadBufferPerStream int32
+
+ // NewWriteScheduler constructs a write scheduler for a connection.
+ // If nil, a default scheduler is chosen.
+ NewWriteScheduler func() WriteScheduler
+
+ // Internal state. This is a pointer (rather than embedded directly)
+ // so that we don't embed a Mutex in this struct, which will make the
+ // struct non-copyable, which might break some callers.
+ state *serverInternalState
+}
+
+func (s *Server) initialConnRecvWindowSize() int32 {
+ if s.MaxUploadBufferPerConnection > initialWindowSize {
+ return s.MaxUploadBufferPerConnection
+ }
+ return 1 << 20
+}
+
+func (s *Server) initialStreamRecvWindowSize() int32 {
+ if s.MaxUploadBufferPerStream > 0 {
+ return s.MaxUploadBufferPerStream
+ }
+ return 1 << 20
+}
+
+func (s *Server) maxReadFrameSize() uint32 {
+ if v := s.MaxReadFrameSize; v >= minMaxFrameSize && v <= maxFrameSize {
+ return v
+ }
+ return defaultMaxReadFrameSize
+}
+
+func (s *Server) maxConcurrentStreams() uint32 {
+ if v := s.MaxConcurrentStreams; v > 0 {
+ return v
+ }
+ return defaultMaxStreams
+}
+
+type serverInternalState struct {
+ mu sync.Mutex
+ activeConns map[*serverConn]struct{}
+}
+
+func (s *serverInternalState) registerConn(sc *serverConn) {
+ if s == nil {
+ return // if the Server was used without calling ConfigureServer
+ }
+ s.mu.Lock()
+ s.activeConns[sc] = struct{}{}
+ s.mu.Unlock()
+}
+
+func (s *serverInternalState) unregisterConn(sc *serverConn) {
+ if s == nil {
+ return // if the Server was used without calling ConfigureServer
+ }
+ s.mu.Lock()
+ delete(s.activeConns, sc)
+ s.mu.Unlock()
+}
+
+func (s *serverInternalState) startGracefulShutdown() {
+ if s == nil {
+ return // if the Server was used without calling ConfigureServer
+ }
+ s.mu.Lock()
+ for sc := range s.activeConns {
+ sc.startGracefulShutdown()
+ }
+ s.mu.Unlock()
+}
+
+// ConfigureServer adds HTTP/2 support to a net/http Server.
+//
+// The configuration conf may be nil.
+//
+// ConfigureServer must be called before s begins serving.
+func ConfigureServer(s *http.Server, conf *Server) error {
+ if s == nil {
+ panic("nil *http.Server")
+ }
+ if conf == nil {
+ conf = new(Server)
+ }
+ conf.state = &serverInternalState{activeConns: make(map[*serverConn]struct{})}
+ if h1, h2 := s, conf; h2.IdleTimeout == 0 {
+ if h1.IdleTimeout != 0 {
+ h2.IdleTimeout = h1.IdleTimeout
+ } else {
+ h2.IdleTimeout = h1.ReadTimeout
+ }
+ }
+ s.RegisterOnShutdown(conf.state.startGracefulShutdown)
+
+ if s.TLSConfig == nil {
+ s.TLSConfig = new(tls.Config)
+ } else if s.TLSConfig.CipherSuites != nil {
+ // If they already provided a CipherSuite list, return
+ // an error if it has a bad order or is missing
+ // ECDHE_RSA_WITH_AES_128_GCM_SHA256 or ECDHE_ECDSA_WITH_AES_128_GCM_SHA256.
+ haveRequired := false
+ sawBad := false
+ for i, cs := range s.TLSConfig.CipherSuites {
+ switch cs {
+ case tls.TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,
+ // Alternative MTI cipher to not discourage ECDSA-only servers.
+ // See http://golang.org/cl/30721 for further information.
+ tls.TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256:
+ haveRequired = true
+ }
+ if isBadCipher(cs) {
+ sawBad = true
+ } else if sawBad {
+ return fmt.Errorf("http2: TLSConfig.CipherSuites index %d contains an HTTP/2-approved cipher suite (%#04x), but it comes after unapproved cipher suites. With this configuration, clients that don't support previous, approved cipher suites may be given an unapproved one and reject the connection.", i, cs)
+ }
+ }
+ if !haveRequired {
+ return fmt.Errorf("http2: TLSConfig.CipherSuites is missing an HTTP/2-required AES_128_GCM_SHA256 cipher.")
+ }
+ }
+
+ // Note: not setting MinVersion to tls.VersionTLS12,
+ // as we don't want to interfere with HTTP/1.1 traffic
+ // on the user's server. We enforce TLS 1.2 later once
+ // we accept a connection. Ideally this should be done
+ // during next-proto selection, but using TLS <1.2 with
+ // HTTP/2 is still the client's bug.
+
+ s.TLSConfig.PreferServerCipherSuites = true
+
+ haveNPN := false
+ for _, p := range s.TLSConfig.NextProtos {
+ if p == NextProtoTLS {
+ haveNPN = true
+ break
+ }
+ }
+ if !haveNPN {
+ s.TLSConfig.NextProtos = append(s.TLSConfig.NextProtos, NextProtoTLS)
+ }
+
+ if s.TLSNextProto == nil {
+ s.TLSNextProto = map[string]func(*http.Server, *tls.Conn, http.Handler){}
+ }
+ protoHandler := func(hs *http.Server, c *tls.Conn, h http.Handler) {
+ if testHookOnConn != nil {
+ testHookOnConn()
+ }
+ conf.ServeConn(c, &ServeConnOpts{
+ Handler: h,
+ BaseConfig: hs,
+ })
+ }
+ s.TLSNextProto[NextProtoTLS] = protoHandler
+ return nil
+}
+
+// ServeConnOpts are options for the Server.ServeConn method.
+type ServeConnOpts struct {
+ // BaseConfig optionally sets the base configuration
+ // for values. If nil, defaults are used.
+ BaseConfig *http.Server
+
+ // Handler specifies which handler to use for processing
+ // requests. If nil, BaseConfig.Handler is used. If BaseConfig
+ // or BaseConfig.Handler is nil, http.DefaultServeMux is used.
+ Handler http.Handler
+}
+
+func (o *ServeConnOpts) baseConfig() *http.Server {
+ if o != nil && o.BaseConfig != nil {
+ return o.BaseConfig
+ }
+ return new(http.Server)
+}
+
+func (o *ServeConnOpts) handler() http.Handler {
+ if o != nil {
+ if o.Handler != nil {
+ return o.Handler
+ }
+ if o.BaseConfig != nil && o.BaseConfig.Handler != nil {
+ return o.BaseConfig.Handler
+ }
+ }
+ return http.DefaultServeMux
+}
+
+// ServeConn serves HTTP/2 requests on the provided connection and
+// blocks until the connection is no longer readable.
+//
+// ServeConn starts speaking HTTP/2 assuming that c has not had any
+// reads or writes. It writes its initial settings frame and expects
+// to be able to read the preface and settings frame from the
+// client. If c has a ConnectionState method like a *tls.Conn, the
+// ConnectionState is used to verify the TLS ciphersuite and to set
+// the Request.TLS field in Handlers.
+//
+// ServeConn does not support h2c by itself. Any h2c support must be
+// implemented in terms of providing a suitably-behaving net.Conn.
+//
+// The opts parameter is optional. If nil, default values are used.
+func (s *Server) ServeConn(c net.Conn, opts *ServeConnOpts) {
+ baseCtx, cancel := serverConnBaseContext(c, opts)
+ defer cancel()
+
+ sc := &serverConn{
+ srv: s,
+ hs: opts.baseConfig(),
+ conn: c,
+ baseCtx: baseCtx,
+ remoteAddrStr: c.RemoteAddr().String(),
+ bw: newBufferedWriter(c),
+ handler: opts.handler(),
+ streams: make(map[uint32]*stream),
+ readFrameCh: make(chan readFrameResult),
+ wantWriteFrameCh: make(chan FrameWriteRequest, 8),
+ serveMsgCh: make(chan interface{}, 8),
+ wroteFrameCh: make(chan frameWriteResult, 1), // buffered; one send in writeFrameAsync
+ bodyReadCh: make(chan bodyReadMsg), // buffering doesn't matter either way
+ doneServing: make(chan struct{}),
+ clientMaxStreams: math.MaxUint32, // Section 6.5.2: "Initially, there is no limit to this value"
+ advMaxStreams: s.maxConcurrentStreams(),
+ initialStreamSendWindowSize: initialWindowSize,
+ maxFrameSize: initialMaxFrameSize,
+ headerTableSize: initialHeaderTableSize,
+ serveG: newGoroutineLock(),
+ pushEnabled: true,
+ }
+
+ s.state.registerConn(sc)
+ defer s.state.unregisterConn(sc)
+
+ // The net/http package sets the write deadline from the
+ // http.Server.WriteTimeout during the TLS handshake, but then
+ // passes the connection off to us with the deadline already set.
+ // Write deadlines are set per stream in serverConn.newStream.
+ // Disarm the net.Conn write deadline here.
+ if sc.hs.WriteTimeout != 0 {
+ sc.conn.SetWriteDeadline(time.Time{})
+ }
+
+ if s.NewWriteScheduler != nil {
+ sc.writeSched = s.NewWriteScheduler()
+ } else {
+ sc.writeSched = NewRandomWriteScheduler()
+ }
+
+ // These start at the RFC-specified defaults. If there is a higher
+ // configured value for inflow, that will be updated when we send a
+ // WINDOW_UPDATE shortly after sending SETTINGS.
+ sc.flow.add(initialWindowSize)
+ sc.inflow.add(initialWindowSize)
+ sc.hpackEncoder = hpack.NewEncoder(&sc.headerWriteBuf)
+
+ fr := NewFramer(sc.bw, c)
+ fr.ReadMetaHeaders = hpack.NewDecoder(initialHeaderTableSize, nil)
+ fr.MaxHeaderListSize = sc.maxHeaderListSize()
+ fr.SetMaxReadFrameSize(s.maxReadFrameSize())
+ sc.framer = fr
+
+ if tc, ok := c.(connectionStater); ok {
+ sc.tlsState = new(tls.ConnectionState)
+ *sc.tlsState = tc.ConnectionState()
+ // 9.2 Use of TLS Features
+ // An implementation of HTTP/2 over TLS MUST use TLS
+ // 1.2 or higher with the restrictions on feature set
+ // and cipher suite described in this section. Due to
+ // implementation limitations, it might not be
+ // possible to fail TLS negotiation. An endpoint MUST
+ // immediately terminate an HTTP/2 connection that
+ // does not meet the TLS requirements described in
+ // this section with a connection error (Section
+ // 5.4.1) of type INADEQUATE_SECURITY.
+ if sc.tlsState.Version < tls.VersionTLS12 {
+ sc.rejectConn(ErrCodeInadequateSecurity, "TLS version too low")
+ return
+ }
+
+ if sc.tlsState.ServerName == "" {
+ // Client must use SNI, but we don't enforce that anymore,
+ // since it was causing problems when connecting to bare IP
+ // addresses during development.
+ //
+ // TODO: optionally enforce? Or enforce at the time we receive
+ // a new request, and verify the ServerName matches the :authority?
+ // But that precludes proxy situations, perhaps.
+ //
+ // So for now, do nothing here again.
+ }
+
+ if !s.PermitProhibitedCipherSuites && isBadCipher(sc.tlsState.CipherSuite) {
+ // "Endpoints MAY choose to generate a connection error
+ // (Section 5.4.1) of type INADEQUATE_SECURITY if one of
+ // the prohibited cipher suites are negotiated."
+ //
+ // We choose that. In my opinion, the spec is weak
+ // here. It also says both parties must support at least
+ // TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 so there's no
+ // excuses here. If we really must, we could allow an
+ // "AllowInsecureWeakCiphers" option on the server later.
+ // Let's see how it plays out first.
+ sc.rejectConn(ErrCodeInadequateSecurity, fmt.Sprintf("Prohibited TLS 1.2 Cipher Suite: %x", sc.tlsState.CipherSuite))
+ return
+ }
+ }
+
+ if hook := testHookGetServerConn; hook != nil {
+ hook(sc)
+ }
+ sc.serve()
+}
+
+func serverConnBaseContext(c net.Conn, opts *ServeConnOpts) (ctx context.Context, cancel func()) {
+ ctx, cancel = context.WithCancel(context.Background())
+ ctx = context.WithValue(ctx, http.LocalAddrContextKey, c.LocalAddr())
+ if hs := opts.baseConfig(); hs != nil {
+ ctx = context.WithValue(ctx, http.ServerContextKey, hs)
+ }
+ return
+}
+
+func (sc *serverConn) rejectConn(err ErrCode, debug string) {
+ sc.vlogf("http2: server rejecting conn: %v, %s", err, debug)
+ // ignoring errors. hanging up anyway.
+ sc.framer.WriteGoAway(0, err, []byte(debug))
+ sc.bw.Flush()
+ sc.conn.Close()
+}
+
+type serverConn struct {
+ // Immutable:
+ srv *Server
+ hs *http.Server
+ conn net.Conn
+ bw *bufferedWriter // writing to conn
+ handler http.Handler
+ baseCtx context.Context
+ framer *Framer
+ doneServing chan struct{} // closed when serverConn.serve ends
+ readFrameCh chan readFrameResult // written by serverConn.readFrames
+ wantWriteFrameCh chan FrameWriteRequest // from handlers -> serve
+ wroteFrameCh chan frameWriteResult // from writeFrameAsync -> serve, tickles more frame writes
+ bodyReadCh chan bodyReadMsg // from handlers -> serve
+ serveMsgCh chan interface{} // misc messages & code to send to / run on the serve loop
+ flow flow // conn-wide (not stream-specific) outbound flow control
+ inflow flow // conn-wide inbound flow control
+ tlsState *tls.ConnectionState // shared by all handlers, like net/http
+ remoteAddrStr string
+ writeSched WriteScheduler
+
+ // Everything following is owned by the serve loop; use serveG.check():
+ serveG goroutineLock // used to verify funcs are on serve()
+ pushEnabled bool
+ sawFirstSettings bool // got the initial SETTINGS frame after the preface
+ needToSendSettingsAck bool
+ unackedSettings int // how many SETTINGS have we sent without ACKs?
+ clientMaxStreams uint32 // SETTINGS_MAX_CONCURRENT_STREAMS from client (our PUSH_PROMISE limit)
+ advMaxStreams uint32 // our SETTINGS_MAX_CONCURRENT_STREAMS advertised the client
+ curClientStreams uint32 // number of open streams initiated by the client
+ curPushedStreams uint32 // number of open streams initiated by server push
+ maxClientStreamID uint32 // max ever seen from client (odd), or 0 if there have been no client requests
+ maxPushPromiseID uint32 // ID of the last push promise (even), or 0 if there have been no pushes
+ streams map[uint32]*stream
+ initialStreamSendWindowSize int32
+ maxFrameSize int32
+ headerTableSize uint32
+ peerMaxHeaderListSize uint32 // zero means unknown (default)
+ canonHeader map[string]string // http2-lower-case -> Go-Canonical-Case
+ writingFrame bool // started writing a frame (on serve goroutine or separate)
+ writingFrameAsync bool // started a frame on its own goroutine but haven't heard back on wroteFrameCh
+ needsFrameFlush bool // last frame write wasn't a flush
+ inGoAway bool // we've started to or sent GOAWAY
+ inFrameScheduleLoop bool // whether we're in the scheduleFrameWrite loop
+ needToSendGoAway bool // we need to schedule a GOAWAY frame write
+ goAwayCode ErrCode
+ shutdownTimer *time.Timer // nil until used
+ idleTimer *time.Timer // nil if unused
+
+ // Owned by the writeFrameAsync goroutine:
+ headerWriteBuf bytes.Buffer
+ hpackEncoder *hpack.Encoder
+
+ // Used by startGracefulShutdown.
+ shutdownOnce sync.Once
+}
+
+func (sc *serverConn) maxHeaderListSize() uint32 {
+ n := sc.hs.MaxHeaderBytes
+ if n <= 0 {
+ n = http.DefaultMaxHeaderBytes
+ }
+ // http2's count is in a slightly different unit and includes 32 bytes per pair.
+ // So, take the net/http.Server value and pad it up a bit, assuming 10 headers.
+ const perFieldOverhead = 32 // per http2 spec
+ const typicalHeaders = 10 // conservative
+ return uint32(n + typicalHeaders*perFieldOverhead)
+}
+
+func (sc *serverConn) curOpenStreams() uint32 {
+ sc.serveG.check()
+ return sc.curClientStreams + sc.curPushedStreams
+}
+
+// stream represents a stream. This is the minimal metadata needed by
+// the serve goroutine. Most of the actual stream state is owned by
+// the http.Handler's goroutine in the responseWriter. Because the
+// responseWriter's responseWriterState is recycled at the end of a
+// handler, this struct intentionally has no pointer to the
+// *responseWriter{,State} itself, as the Handler ending nils out the
+// responseWriter's state field.
+type stream struct {
+ // immutable:
+ sc *serverConn
+ id uint32
+ body *pipe // non-nil if expecting DATA frames
+ cw closeWaiter // closed wait stream transitions to closed state
+ ctx context.Context
+ cancelCtx func()
+
+ // owned by serverConn's serve loop:
+ bodyBytes int64 // body bytes seen so far
+ declBodyBytes int64 // or -1 if undeclared
+ flow flow // limits writing from Handler to client
+ inflow flow // what the client is allowed to POST/etc to us
+ parent *stream // or nil
+ numTrailerValues int64
+ weight uint8
+ state streamState
+ resetQueued bool // RST_STREAM queued for write; set by sc.resetStream
+ gotTrailerHeader bool // HEADER frame for trailers was seen
+ wroteHeaders bool // whether we wrote headers (not status 100)
+ writeDeadline *time.Timer // nil if unused
+
+ trailer http.Header // accumulated trailers
+ reqTrailer http.Header // handler's Request.Trailer
+}
+
+func (sc *serverConn) Framer() *Framer { return sc.framer }
+func (sc *serverConn) CloseConn() error { return sc.conn.Close() }
+func (sc *serverConn) Flush() error { return sc.bw.Flush() }
+func (sc *serverConn) HeaderEncoder() (*hpack.Encoder, *bytes.Buffer) {
+ return sc.hpackEncoder, &sc.headerWriteBuf
+}
+
+func (sc *serverConn) state(streamID uint32) (streamState, *stream) {
+ sc.serveG.check()
+ // http://tools.ietf.org/html/rfc7540#section-5.1
+ if st, ok := sc.streams[streamID]; ok {
+ return st.state, st
+ }
+ // "The first use of a new stream identifier implicitly closes all
+ // streams in the "idle" state that might have been initiated by
+ // that peer with a lower-valued stream identifier. For example, if
+ // a client sends a HEADERS frame on stream 7 without ever sending a
+ // frame on stream 5, then stream 5 transitions to the "closed"
+ // state when the first frame for stream 7 is sent or received."
+ if streamID%2 == 1 {
+ if streamID <= sc.maxClientStreamID {
+ return stateClosed, nil
+ }
+ } else {
+ if streamID <= sc.maxPushPromiseID {
+ return stateClosed, nil
+ }
+ }
+ return stateIdle, nil
+}
+
+// setConnState calls the net/http ConnState hook for this connection, if configured.
+// Note that the net/http package does StateNew and StateClosed for us.
+// There is currently no plan for StateHijacked or hijacking HTTP/2 connections.
+func (sc *serverConn) setConnState(state http.ConnState) {
+ if sc.hs.ConnState != nil {
+ sc.hs.ConnState(sc.conn, state)
+ }
+}
+
+func (sc *serverConn) vlogf(format string, args ...interface{}) {
+ if VerboseLogs {
+ sc.logf(format, args...)
+ }
+}
+
+func (sc *serverConn) logf(format string, args ...interface{}) {
+ if lg := sc.hs.ErrorLog; lg != nil {
+ lg.Printf(format, args...)
+ } else {
+ log.Printf(format, args...)
+ }
+}
+
+// errno returns v's underlying uintptr, else 0.
+//
+// TODO: remove this helper function once http2 can use build
+// tags. See comment in isClosedConnError.
+func errno(v error) uintptr {
+ if rv := reflect.ValueOf(v); rv.Kind() == reflect.Uintptr {
+ return uintptr(rv.Uint())
+ }
+ return 0
+}
+
+// isClosedConnError reports whether err is an error from use of a closed
+// network connection.
+func isClosedConnError(err error) bool {
+ if err == nil {
+ return false
+ }
+
+ // TODO: remove this string search and be more like the Windows
+ // case below. That might involve modifying the standard library
+ // to return better error types.
+ str := err.Error()
+ if strings.Contains(str, "use of closed network connection") {
+ return true
+ }
+
+ // TODO(bradfitz): x/tools/cmd/bundle doesn't really support
+ // build tags, so I can't make an http2_windows.go file with
+ // Windows-specific stuff. Fix that and move this, once we
+ // have a way to bundle this into std's net/http somehow.
+ if runtime.GOOS == "windows" {
+ if oe, ok := err.(*net.OpError); ok && oe.Op == "read" {
+ if se, ok := oe.Err.(*os.SyscallError); ok && se.Syscall == "wsarecv" {
+ const WSAECONNABORTED = 10053
+ const WSAECONNRESET = 10054
+ if n := errno(se.Err); n == WSAECONNRESET || n == WSAECONNABORTED {
+ return true
+ }
+ }
+ }
+ }
+ return false
+}
+
+func (sc *serverConn) condlogf(err error, format string, args ...interface{}) {
+ if err == nil {
+ return
+ }
+ if err == io.EOF || err == io.ErrUnexpectedEOF || isClosedConnError(err) || err == errPrefaceTimeout {
+ // Boring, expected errors.
+ sc.vlogf(format, args...)
+ } else {
+ sc.logf(format, args...)
+ }
+}
+
+func (sc *serverConn) canonicalHeader(v string) string {
+ sc.serveG.check()
+ buildCommonHeaderMapsOnce()
+ cv, ok := commonCanonHeader[v]
+ if ok {
+ return cv
+ }
+ cv, ok = sc.canonHeader[v]
+ if ok {
+ return cv
+ }
+ if sc.canonHeader == nil {
+ sc.canonHeader = make(map[string]string)
+ }
+ cv = http.CanonicalHeaderKey(v)
+ sc.canonHeader[v] = cv
+ return cv
+}
+
+type readFrameResult struct {
+ f Frame // valid until readMore is called
+ err error
+
+ // readMore should be called once the consumer no longer needs or
+ // retains f. After readMore, f is invalid and more frames can be
+ // read.
+ readMore func()
+}
+
+// readFrames is the loop that reads incoming frames.
+// It takes care to only read one frame at a time, blocking until the
+// consumer is done with the frame.
+// It's run on its own goroutine.
+func (sc *serverConn) readFrames() {
+ gate := make(gate)
+ gateDone := gate.Done
+ for {
+ f, err := sc.framer.ReadFrame()
+ select {
+ case sc.readFrameCh <- readFrameResult{f, err, gateDone}:
+ case <-sc.doneServing:
+ return
+ }
+ select {
+ case <-gate:
+ case <-sc.doneServing:
+ return
+ }
+ if terminalReadFrameError(err) {
+ return
+ }
+ }
+}
+
+// frameWriteResult is the message passed from writeFrameAsync to the serve goroutine.
+type frameWriteResult struct {
+ wr FrameWriteRequest // what was written (or attempted)
+ err error // result of the writeFrame call
+}
+
+// writeFrameAsync runs in its own goroutine and writes a single frame
+// and then reports when it's done.
+// At most one goroutine can be running writeFrameAsync at a time per
+// serverConn.
+func (sc *serverConn) writeFrameAsync(wr FrameWriteRequest) {
+ err := wr.write.writeFrame(sc)
+ sc.wroteFrameCh <- frameWriteResult{wr, err}
+}
+
+func (sc *serverConn) closeAllStreamsOnConnClose() {
+ sc.serveG.check()
+ for _, st := range sc.streams {
+ sc.closeStream(st, errClientDisconnected)
+ }
+}
+
+func (sc *serverConn) stopShutdownTimer() {
+ sc.serveG.check()
+ if t := sc.shutdownTimer; t != nil {
+ t.Stop()
+ }
+}
+
+func (sc *serverConn) notePanic() {
+ // Note: this is for serverConn.serve panicking, not http.Handler code.
+ if testHookOnPanicMu != nil {
+ testHookOnPanicMu.Lock()
+ defer testHookOnPanicMu.Unlock()
+ }
+ if testHookOnPanic != nil {
+ if e := recover(); e != nil {
+ if testHookOnPanic(sc, e) {
+ panic(e)
+ }
+ }
+ }
+}
+
+func (sc *serverConn) serve() {
+ sc.serveG.check()
+ defer sc.notePanic()
+ defer sc.conn.Close()
+ defer sc.closeAllStreamsOnConnClose()
+ defer sc.stopShutdownTimer()
+ defer close(sc.doneServing) // unblocks handlers trying to send
+
+ if VerboseLogs {
+ sc.vlogf("http2: server connection from %v on %p", sc.conn.RemoteAddr(), sc.hs)
+ }
+
+ sc.writeFrame(FrameWriteRequest{
+ write: writeSettings{
+ {SettingMaxFrameSize, sc.srv.maxReadFrameSize()},
+ {SettingMaxConcurrentStreams, sc.advMaxStreams},
+ {SettingMaxHeaderListSize, sc.maxHeaderListSize()},
+ {SettingInitialWindowSize, uint32(sc.srv.initialStreamRecvWindowSize())},
+ },
+ })
+ sc.unackedSettings++
+
+ // Each connection starts with intialWindowSize inflow tokens.
+ // If a higher value is configured, we add more tokens.
+ if diff := sc.srv.initialConnRecvWindowSize() - initialWindowSize; diff > 0 {
+ sc.sendWindowUpdate(nil, int(diff))
+ }
+
+ if err := sc.readPreface(); err != nil {
+ sc.condlogf(err, "http2: server: error reading preface from client %v: %v", sc.conn.RemoteAddr(), err)
+ return
+ }
+ // Now that we've got the preface, get us out of the
+ // "StateNew" state. We can't go directly to idle, though.
+ // Active means we read some data and anticipate a request. We'll
+ // do another Active when we get a HEADERS frame.
+ sc.setConnState(http.StateActive)
+ sc.setConnState(http.StateIdle)
+
+ if sc.srv.IdleTimeout != 0 {
+ sc.idleTimer = time.AfterFunc(sc.srv.IdleTimeout, sc.onIdleTimer)
+ defer sc.idleTimer.Stop()
+ }
+
+ go sc.readFrames() // closed by defer sc.conn.Close above
+
+ settingsTimer := time.AfterFunc(firstSettingsTimeout, sc.onSettingsTimer)
+ defer settingsTimer.Stop()
+
+ loopNum := 0
+ for {
+ loopNum++
+ select {
+ case wr := <-sc.wantWriteFrameCh:
+ if se, ok := wr.write.(StreamError); ok {
+ sc.resetStream(se)
+ break
+ }
+ sc.writeFrame(wr)
+ case res := <-sc.wroteFrameCh:
+ sc.wroteFrame(res)
+ case res := <-sc.readFrameCh:
+ if !sc.processFrameFromReader(res) {
+ return
+ }
+ res.readMore()
+ if settingsTimer != nil {
+ settingsTimer.Stop()
+ settingsTimer = nil
+ }
+ case m := <-sc.bodyReadCh:
+ sc.noteBodyRead(m.st, m.n)
+ case msg := <-sc.serveMsgCh:
+ switch v := msg.(type) {
+ case func(int):
+ v(loopNum) // for testing
+ case *serverMessage:
+ switch v {
+ case settingsTimerMsg:
+ sc.logf("timeout waiting for SETTINGS frames from %v", sc.conn.RemoteAddr())
+ return
+ case idleTimerMsg:
+ sc.vlogf("connection is idle")
+ sc.goAway(ErrCodeNo)
+ case shutdownTimerMsg:
+ sc.vlogf("GOAWAY close timer fired; closing conn from %v", sc.conn.RemoteAddr())
+ return
+ case gracefulShutdownMsg:
+ sc.startGracefulShutdownInternal()
+ default:
+ panic("unknown timer")
+ }
+ case *startPushRequest:
+ sc.startPush(v)
+ default:
+ panic(fmt.Sprintf("unexpected type %T", v))
+ }
+ }
+
+ // Start the shutdown timer after sending a GOAWAY. When sending GOAWAY
+ // with no error code (graceful shutdown), don't start the timer until
+ // all open streams have been completed.
+ sentGoAway := sc.inGoAway && !sc.needToSendGoAway && !sc.writingFrame
+ gracefulShutdownComplete := sc.goAwayCode == ErrCodeNo && sc.curOpenStreams() == 0
+ if sentGoAway && sc.shutdownTimer == nil && (sc.goAwayCode != ErrCodeNo || gracefulShutdownComplete) {
+ sc.shutDownIn(goAwayTimeout)
+ }
+ }
+}
+
+func (sc *serverConn) awaitGracefulShutdown(sharedCh <-chan struct{}, privateCh chan struct{}) {
+ select {
+ case <-sc.doneServing:
+ case <-sharedCh:
+ close(privateCh)
+ }
+}
+
+type serverMessage int
+
+// Message values sent to serveMsgCh.
+var (
+ settingsTimerMsg = new(serverMessage)
+ idleTimerMsg = new(serverMessage)
+ shutdownTimerMsg = new(serverMessage)
+ gracefulShutdownMsg = new(serverMessage)
+)
+
+func (sc *serverConn) onSettingsTimer() { sc.sendServeMsg(settingsTimerMsg) }
+func (sc *serverConn) onIdleTimer() { sc.sendServeMsg(idleTimerMsg) }
+func (sc *serverConn) onShutdownTimer() { sc.sendServeMsg(shutdownTimerMsg) }
+
+func (sc *serverConn) sendServeMsg(msg interface{}) {
+ sc.serveG.checkNotOn() // NOT
+ select {
+ case sc.serveMsgCh <- msg:
+ case <-sc.doneServing:
+ }
+}
+
+var errPrefaceTimeout = errors.New("timeout waiting for client preface")
+
+// readPreface reads the ClientPreface greeting from the peer or
+// returns errPrefaceTimeout on timeout, or an error if the greeting
+// is invalid.
+func (sc *serverConn) readPreface() error {
+ errc := make(chan error, 1)
+ go func() {
+ // Read the client preface
+ buf := make([]byte, len(ClientPreface))
+ if _, err := io.ReadFull(sc.conn, buf); err != nil {
+ errc <- err
+ } else if !bytes.Equal(buf, clientPreface) {
+ errc <- fmt.Errorf("bogus greeting %q", buf)
+ } else {
+ errc <- nil
+ }
+ }()
+ timer := time.NewTimer(prefaceTimeout) // TODO: configurable on *Server?
+ defer timer.Stop()
+ select {
+ case <-timer.C:
+ return errPrefaceTimeout
+ case err := <-errc:
+ if err == nil {
+ if VerboseLogs {
+ sc.vlogf("http2: server: client %v said hello", sc.conn.RemoteAddr())
+ }
+ }
+ return err
+ }
+}
+
+var errChanPool = sync.Pool{
+ New: func() interface{} { return make(chan error, 1) },
+}
+
+var writeDataPool = sync.Pool{
+ New: func() interface{} { return new(writeData) },
+}
+
+// writeDataFromHandler writes DATA response frames from a handler on
+// the given stream.
+func (sc *serverConn) writeDataFromHandler(stream *stream, data []byte, endStream bool) error {
+ ch := errChanPool.Get().(chan error)
+ writeArg := writeDataPool.Get().(*writeData)
+ *writeArg = writeData{stream.id, data, endStream}
+ err := sc.writeFrameFromHandler(FrameWriteRequest{
+ write: writeArg,
+ stream: stream,
+ done: ch,
+ })
+ if err != nil {
+ return err
+ }
+ var frameWriteDone bool // the frame write is done (successfully or not)
+ select {
+ case err = <-ch:
+ frameWriteDone = true
+ case <-sc.doneServing:
+ return errClientDisconnected
+ case <-stream.cw:
+ // If both ch and stream.cw were ready (as might
+ // happen on the final Write after an http.Handler
+ // ends), prefer the write result. Otherwise this
+ // might just be us successfully closing the stream.
+ // The writeFrameAsync and serve goroutines guarantee
+ // that the ch send will happen before the stream.cw
+ // close.
+ select {
+ case err = <-ch:
+ frameWriteDone = true
+ default:
+ return errStreamClosed
+ }
+ }
+ errChanPool.Put(ch)
+ if frameWriteDone {
+ writeDataPool.Put(writeArg)
+ }
+ return err
+}
+
+// writeFrameFromHandler sends wr to sc.wantWriteFrameCh, but aborts
+// if the connection has gone away.
+//
+// This must not be run from the serve goroutine itself, else it might
+// deadlock writing to sc.wantWriteFrameCh (which is only mildly
+// buffered and is read by serve itself). If you're on the serve
+// goroutine, call writeFrame instead.
+func (sc *serverConn) writeFrameFromHandler(wr FrameWriteRequest) error {
+ sc.serveG.checkNotOn() // NOT
+ select {
+ case sc.wantWriteFrameCh <- wr:
+ return nil
+ case <-sc.doneServing:
+ // Serve loop is gone.
+ // Client has closed their connection to the server.
+ return errClientDisconnected
+ }
+}
+
+// writeFrame schedules a frame to write and sends it if there's nothing
+// already being written.
+//
+// There is no pushback here (the serve goroutine never blocks). It's
+// the http.Handlers that block, waiting for their previous frames to
+// make it onto the wire
+//
+// If you're not on the serve goroutine, use writeFrameFromHandler instead.
+func (sc *serverConn) writeFrame(wr FrameWriteRequest) {
+ sc.serveG.check()
+
+ // If true, wr will not be written and wr.done will not be signaled.
+ var ignoreWrite bool
+
+ // We are not allowed to write frames on closed streams. RFC 7540 Section
+ // 5.1.1 says: "An endpoint MUST NOT send frames other than PRIORITY on
+ // a closed stream." Our server never sends PRIORITY, so that exception
+ // does not apply.
+ //
+ // The serverConn might close an open stream while the stream's handler
+ // is still running. For example, the server might close a stream when it
+ // receives bad data from the client. If this happens, the handler might
+ // attempt to write a frame after the stream has been closed (since the
+ // handler hasn't yet been notified of the close). In this case, we simply
+ // ignore the frame. The handler will notice that the stream is closed when
+ // it waits for the frame to be written.
+ //
+ // As an exception to this rule, we allow sending RST_STREAM after close.
+ // This allows us to immediately reject new streams without tracking any
+ // state for those streams (except for the queued RST_STREAM frame). This
+ // may result in duplicate RST_STREAMs in some cases, but the client should
+ // ignore those.
+ if wr.StreamID() != 0 {
+ _, isReset := wr.write.(StreamError)
+ if state, _ := sc.state(wr.StreamID()); state == stateClosed && !isReset {
+ ignoreWrite = true
+ }
+ }
+
+ // Don't send a 100-continue response if we've already sent headers.
+ // See golang.org/issue/14030.
+ switch wr.write.(type) {
+ case *writeResHeaders:
+ wr.stream.wroteHeaders = true
+ case write100ContinueHeadersFrame:
+ if wr.stream.wroteHeaders {
+ // We do not need to notify wr.done because this frame is
+ // never written with wr.done != nil.
+ if wr.done != nil {
+ panic("wr.done != nil for write100ContinueHeadersFrame")
+ }
+ ignoreWrite = true
+ }
+ }
+
+ if !ignoreWrite {
+ sc.writeSched.Push(wr)
+ }
+ sc.scheduleFrameWrite()
+}
+
+// startFrameWrite starts a goroutine to write wr (in a separate
+// goroutine since that might block on the network), and updates the
+// serve goroutine's state about the world, updated from info in wr.
+func (sc *serverConn) startFrameWrite(wr FrameWriteRequest) {
+ sc.serveG.check()
+ if sc.writingFrame {
+ panic("internal error: can only be writing one frame at a time")
+ }
+
+ st := wr.stream
+ if st != nil {
+ switch st.state {
+ case stateHalfClosedLocal:
+ switch wr.write.(type) {
+ case StreamError, handlerPanicRST, writeWindowUpdate:
+ // RFC 7540 Section 5.1 allows sending RST_STREAM, PRIORITY, and WINDOW_UPDATE
+ // in this state. (We never send PRIORITY from the server, so that is not checked.)
+ default:
+ panic(fmt.Sprintf("internal error: attempt to send frame on a half-closed-local stream: %v", wr))
+ }
+ case stateClosed:
+ panic(fmt.Sprintf("internal error: attempt to send frame on a closed stream: %v", wr))
+ }
+ }
+ if wpp, ok := wr.write.(*writePushPromise); ok {
+ var err error
+ wpp.promisedID, err = wpp.allocatePromisedID()
+ if err != nil {
+ sc.writingFrameAsync = false
+ wr.replyToWriter(err)
+ return
+ }
+ }
+
+ sc.writingFrame = true
+ sc.needsFrameFlush = true
+ if wr.write.staysWithinBuffer(sc.bw.Available()) {
+ sc.writingFrameAsync = false
+ err := wr.write.writeFrame(sc)
+ sc.wroteFrame(frameWriteResult{wr, err})
+ } else {
+ sc.writingFrameAsync = true
+ go sc.writeFrameAsync(wr)
+ }
+}
+
+// errHandlerPanicked is the error given to any callers blocked in a read from
+// Request.Body when the main goroutine panics. Since most handlers read in the
+// main ServeHTTP goroutine, this will show up rarely.
+var errHandlerPanicked = errors.New("http2: handler panicked")
+
+// wroteFrame is called on the serve goroutine with the result of
+// whatever happened on writeFrameAsync.
+func (sc *serverConn) wroteFrame(res frameWriteResult) {
+ sc.serveG.check()
+ if !sc.writingFrame {
+ panic("internal error: expected to be already writing a frame")
+ }
+ sc.writingFrame = false
+ sc.writingFrameAsync = false
+
+ wr := res.wr
+
+ if writeEndsStream(wr.write) {
+ st := wr.stream
+ if st == nil {
+ panic("internal error: expecting non-nil stream")
+ }
+ switch st.state {
+ case stateOpen:
+ // Here we would go to stateHalfClosedLocal in
+ // theory, but since our handler is done and
+ // the net/http package provides no mechanism
+ // for closing a ResponseWriter while still
+ // reading data (see possible TODO at top of
+ // this file), we go into closed state here
+ // anyway, after telling the peer we're
+ // hanging up on them. We'll transition to
+ // stateClosed after the RST_STREAM frame is
+ // written.
+ st.state = stateHalfClosedLocal
+ // Section 8.1: a server MAY request that the client abort
+ // transmission of a request without error by sending a
+ // RST_STREAM with an error code of NO_ERROR after sending
+ // a complete response.
+ sc.resetStream(streamError(st.id, ErrCodeNo))
+ case stateHalfClosedRemote:
+ sc.closeStream(st, errHandlerComplete)
+ }
+ } else {
+ switch v := wr.write.(type) {
+ case StreamError:
+ // st may be unknown if the RST_STREAM was generated to reject bad input.
+ if st, ok := sc.streams[v.StreamID]; ok {
+ sc.closeStream(st, v)
+ }
+ case handlerPanicRST:
+ sc.closeStream(wr.stream, errHandlerPanicked)
+ }
+ }
+
+ // Reply (if requested) to unblock the ServeHTTP goroutine.
+ wr.replyToWriter(res.err)
+
+ sc.scheduleFrameWrite()
+}
+
+// scheduleFrameWrite tickles the frame writing scheduler.
+//
+// If a frame is already being written, nothing happens. This will be called again
+// when the frame is done being written.
+//
+// If a frame isn't being written we need to send one, the best frame
+// to send is selected, preferring first things that aren't
+// stream-specific (e.g. ACKing settings), and then finding the
+// highest priority stream.
+//
+// If a frame isn't being written and there's nothing else to send, we
+// flush the write buffer.
+func (sc *serverConn) scheduleFrameWrite() {
+ sc.serveG.check()
+ if sc.writingFrame || sc.inFrameScheduleLoop {
+ return
+ }
+ sc.inFrameScheduleLoop = true
+ for !sc.writingFrameAsync {
+ if sc.needToSendGoAway {
+ sc.needToSendGoAway = false
+ sc.startFrameWrite(FrameWriteRequest{
+ write: &writeGoAway{
+ maxStreamID: sc.maxClientStreamID,
+ code: sc.goAwayCode,
+ },
+ })
+ continue
+ }
+ if sc.needToSendSettingsAck {
+ sc.needToSendSettingsAck = false
+ sc.startFrameWrite(FrameWriteRequest{write: writeSettingsAck{}})
+ continue
+ }
+ if !sc.inGoAway || sc.goAwayCode == ErrCodeNo {
+ if wr, ok := sc.writeSched.Pop(); ok {
+ sc.startFrameWrite(wr)
+ continue
+ }
+ }
+ if sc.needsFrameFlush {
+ sc.startFrameWrite(FrameWriteRequest{write: flushFrameWriter{}})
+ sc.needsFrameFlush = false // after startFrameWrite, since it sets this true
+ continue
+ }
+ break
+ }
+ sc.inFrameScheduleLoop = false
+}
+
+// startGracefulShutdown gracefully shuts down a connection. This
+// sends GOAWAY with ErrCodeNo to tell the client we're gracefully
+// shutting down. The connection isn't closed until all current
+// streams are done.
+//
+// startGracefulShutdown returns immediately; it does not wait until
+// the connection has shut down.
+func (sc *serverConn) startGracefulShutdown() {
+ sc.serveG.checkNotOn() // NOT
+ sc.shutdownOnce.Do(func() { sc.sendServeMsg(gracefulShutdownMsg) })
+}
+
+// After sending GOAWAY, the connection will close after goAwayTimeout.
+// If we close the connection immediately after sending GOAWAY, there may
+// be unsent data in our kernel receive buffer, which will cause the kernel
+// to send a TCP RST on close() instead of a FIN. This RST will abort the
+// connection immediately, whether or not the client had received the GOAWAY.
+//
+// Ideally we should delay for at least 1 RTT + epsilon so the client has
+// a chance to read the GOAWAY and stop sending messages. Measuring RTT
+// is hard, so we approximate with 1 second. See golang.org/issue/18701.
+//
+// This is a var so it can be shorter in tests, where all requests uses the
+// loopback interface making the expected RTT very small.
+//
+// TODO: configurable?
+var goAwayTimeout = 1 * time.Second
+
+func (sc *serverConn) startGracefulShutdownInternal() {
+ sc.goAway(ErrCodeNo)
+}
+
+func (sc *serverConn) goAway(code ErrCode) {
+ sc.serveG.check()
+ if sc.inGoAway {
+ return
+ }
+ sc.inGoAway = true
+ sc.needToSendGoAway = true
+ sc.goAwayCode = code
+ sc.scheduleFrameWrite()
+}
+
+func (sc *serverConn) shutDownIn(d time.Duration) {
+ sc.serveG.check()
+ sc.shutdownTimer = time.AfterFunc(d, sc.onShutdownTimer)
+}
+
+func (sc *serverConn) resetStream(se StreamError) {
+ sc.serveG.check()
+ sc.writeFrame(FrameWriteRequest{write: se})
+ if st, ok := sc.streams[se.StreamID]; ok {
+ st.resetQueued = true
+ }
+}
+
+// processFrameFromReader processes the serve loop's read from readFrameCh from the
+// frame-reading goroutine.
+// processFrameFromReader returns whether the connection should be kept open.
+func (sc *serverConn) processFrameFromReader(res readFrameResult) bool {
+ sc.serveG.check()
+ err := res.err
+ if err != nil {
+ if err == ErrFrameTooLarge {
+ sc.goAway(ErrCodeFrameSize)
+ return true // goAway will close the loop
+ }
+ clientGone := err == io.EOF || err == io.ErrUnexpectedEOF || isClosedConnError(err)
+ if clientGone {
+ // TODO: could we also get into this state if
+ // the peer does a half close
+ // (e.g. CloseWrite) because they're done
+ // sending frames but they're still wanting
+ // our open replies? Investigate.
+ // TODO: add CloseWrite to crypto/tls.Conn first
+ // so we have a way to test this? I suppose
+ // just for testing we could have a non-TLS mode.
+ return false
+ }
+ } else {
+ f := res.f
+ if VerboseLogs {
+ sc.vlogf("http2: server read frame %v", summarizeFrame(f))
+ }
+ err = sc.processFrame(f)
+ if err == nil {
+ return true
+ }
+ }
+
+ switch ev := err.(type) {
+ case StreamError:
+ sc.resetStream(ev)
+ return true
+ case goAwayFlowError:
+ sc.goAway(ErrCodeFlowControl)
+ return true
+ case ConnectionError:
+ sc.logf("http2: server connection error from %v: %v", sc.conn.RemoteAddr(), ev)
+ sc.goAway(ErrCode(ev))
+ return true // goAway will handle shutdown
+ default:
+ if res.err != nil {
+ sc.vlogf("http2: server closing client connection; error reading frame from client %s: %v", sc.conn.RemoteAddr(), err)
+ } else {
+ sc.logf("http2: server closing client connection: %v", err)
+ }
+ return false
+ }
+}
+
+func (sc *serverConn) processFrame(f Frame) error {
+ sc.serveG.check()
+
+ // First frame received must be SETTINGS.
+ if !sc.sawFirstSettings {
+ if _, ok := f.(*SettingsFrame); !ok {
+ return ConnectionError(ErrCodeProtocol)
+ }
+ sc.sawFirstSettings = true
+ }
+
+ switch f := f.(type) {
+ case *SettingsFrame:
+ return sc.processSettings(f)
+ case *MetaHeadersFrame:
+ return sc.processHeaders(f)
+ case *WindowUpdateFrame:
+ return sc.processWindowUpdate(f)
+ case *PingFrame:
+ return sc.processPing(f)
+ case *DataFrame:
+ return sc.processData(f)
+ case *RSTStreamFrame:
+ return sc.processResetStream(f)
+ case *PriorityFrame:
+ return sc.processPriority(f)
+ case *GoAwayFrame:
+ return sc.processGoAway(f)
+ case *PushPromiseFrame:
+ // A client cannot push. Thus, servers MUST treat the receipt of a PUSH_PROMISE
+ // frame as a connection error (Section 5.4.1) of type PROTOCOL_ERROR.
+ return ConnectionError(ErrCodeProtocol)
+ default:
+ sc.vlogf("http2: server ignoring frame: %v", f.Header())
+ return nil
+ }
+}
+
+func (sc *serverConn) processPing(f *PingFrame) error {
+ sc.serveG.check()
+ if f.IsAck() {
+ // 6.7 PING: " An endpoint MUST NOT respond to PING frames
+ // containing this flag."
+ return nil
+ }
+ if f.StreamID != 0 {
+ // "PING frames are not associated with any individual
+ // stream. If a PING frame is received with a stream
+ // identifier field value other than 0x0, the recipient MUST
+ // respond with a connection error (Section 5.4.1) of type
+ // PROTOCOL_ERROR."
+ return ConnectionError(ErrCodeProtocol)
+ }
+ if sc.inGoAway && sc.goAwayCode != ErrCodeNo {
+ return nil
+ }
+ sc.writeFrame(FrameWriteRequest{write: writePingAck{f}})
+ return nil
+}
+
+func (sc *serverConn) processWindowUpdate(f *WindowUpdateFrame) error {
+ sc.serveG.check()
+ switch {
+ case f.StreamID != 0: // stream-level flow control
+ state, st := sc.state(f.StreamID)
+ if state == stateIdle {
+ // Section 5.1: "Receiving any frame other than HEADERS
+ // or PRIORITY on a stream in this state MUST be
+ // treated as a connection error (Section 5.4.1) of
+ // type PROTOCOL_ERROR."
+ return ConnectionError(ErrCodeProtocol)
+ }
+ if st == nil {
+ // "WINDOW_UPDATE can be sent by a peer that has sent a
+ // frame bearing the END_STREAM flag. This means that a
+ // receiver could receive a WINDOW_UPDATE frame on a "half
+ // closed (remote)" or "closed" stream. A receiver MUST
+ // NOT treat this as an error, see Section 5.1."
+ return nil
+ }
+ if !st.flow.add(int32(f.Increment)) {
+ return streamError(f.StreamID, ErrCodeFlowControl)
+ }
+ default: // connection-level flow control
+ if !sc.flow.add(int32(f.Increment)) {
+ return goAwayFlowError{}
+ }
+ }
+ sc.scheduleFrameWrite()
+ return nil
+}
+
+func (sc *serverConn) processResetStream(f *RSTStreamFrame) error {
+ sc.serveG.check()
+
+ state, st := sc.state(f.StreamID)
+ if state == stateIdle {
+ // 6.4 "RST_STREAM frames MUST NOT be sent for a
+ // stream in the "idle" state. If a RST_STREAM frame
+ // identifying an idle stream is received, the
+ // recipient MUST treat this as a connection error
+ // (Section 5.4.1) of type PROTOCOL_ERROR.
+ return ConnectionError(ErrCodeProtocol)
+ }
+ if st != nil {
+ st.cancelCtx()
+ sc.closeStream(st, streamError(f.StreamID, f.ErrCode))
+ }
+ return nil
+}
+
+func (sc *serverConn) closeStream(st *stream, err error) {
+ sc.serveG.check()
+ if st.state == stateIdle || st.state == stateClosed {
+ panic(fmt.Sprintf("invariant; can't close stream in state %v", st.state))
+ }
+ st.state = stateClosed
+ if st.writeDeadline != nil {
+ st.writeDeadline.Stop()
+ }
+ if st.isPushed() {
+ sc.curPushedStreams--
+ } else {
+ sc.curClientStreams--
+ }
+ delete(sc.streams, st.id)
+ if len(sc.streams) == 0 {
+ sc.setConnState(http.StateIdle)
+ if sc.srv.IdleTimeout != 0 {
+ sc.idleTimer.Reset(sc.srv.IdleTimeout)
+ }
+ if h1ServerKeepAlivesDisabled(sc.hs) {
+ sc.startGracefulShutdownInternal()
+ }
+ }
+ if p := st.body; p != nil {
+ // Return any buffered unread bytes worth of conn-level flow control.
+ // See golang.org/issue/16481
+ sc.sendWindowUpdate(nil, p.Len())
+
+ p.CloseWithError(err)
+ }
+ st.cw.Close() // signals Handler's CloseNotifier, unblocks writes, etc
+ sc.writeSched.CloseStream(st.id)
+}
+
+func (sc *serverConn) processSettings(f *SettingsFrame) error {
+ sc.serveG.check()
+ if f.IsAck() {
+ sc.unackedSettings--
+ if sc.unackedSettings < 0 {
+ // Why is the peer ACKing settings we never sent?
+ // The spec doesn't mention this case, but
+ // hang up on them anyway.
+ return ConnectionError(ErrCodeProtocol)
+ }
+ return nil
+ }
+ if f.NumSettings() > 100 || f.HasDuplicates() {
+ // This isn't actually in the spec, but hang up on
+ // suspiciously large settings frames or those with
+ // duplicate entries.
+ return ConnectionError(ErrCodeProtocol)
+ }
+ if err := f.ForeachSetting(sc.processSetting); err != nil {
+ return err
+ }
+ sc.needToSendSettingsAck = true
+ sc.scheduleFrameWrite()
+ return nil
+}
+
+func (sc *serverConn) processSetting(s Setting) error {
+ sc.serveG.check()
+ if err := s.Valid(); err != nil {
+ return err
+ }
+ if VerboseLogs {
+ sc.vlogf("http2: server processing setting %v", s)
+ }
+ switch s.ID {
+ case SettingHeaderTableSize:
+ sc.headerTableSize = s.Val
+ sc.hpackEncoder.SetMaxDynamicTableSize(s.Val)
+ case SettingEnablePush:
+ sc.pushEnabled = s.Val != 0
+ case SettingMaxConcurrentStreams:
+ sc.clientMaxStreams = s.Val
+ case SettingInitialWindowSize:
+ return sc.processSettingInitialWindowSize(s.Val)
+ case SettingMaxFrameSize:
+ sc.maxFrameSize = int32(s.Val) // the maximum valid s.Val is < 2^31
+ case SettingMaxHeaderListSize:
+ sc.peerMaxHeaderListSize = s.Val
+ default:
+ // Unknown setting: "An endpoint that receives a SETTINGS
+ // frame with any unknown or unsupported identifier MUST
+ // ignore that setting."
+ if VerboseLogs {
+ sc.vlogf("http2: server ignoring unknown setting %v", s)
+ }
+ }
+ return nil
+}
+
+func (sc *serverConn) processSettingInitialWindowSize(val uint32) error {
+ sc.serveG.check()
+ // Note: val already validated to be within range by
+ // processSetting's Valid call.
+
+ // "A SETTINGS frame can alter the initial flow control window
+ // size for all current streams. When the value of
+ // SETTINGS_INITIAL_WINDOW_SIZE changes, a receiver MUST
+ // adjust the size of all stream flow control windows that it
+ // maintains by the difference between the new value and the
+ // old value."
+ old := sc.initialStreamSendWindowSize
+ sc.initialStreamSendWindowSize = int32(val)
+ growth := int32(val) - old // may be negative
+ for _, st := range sc.streams {
+ if !st.flow.add(growth) {
+ // 6.9.2 Initial Flow Control Window Size
+ // "An endpoint MUST treat a change to
+ // SETTINGS_INITIAL_WINDOW_SIZE that causes any flow
+ // control window to exceed the maximum size as a
+ // connection error (Section 5.4.1) of type
+ // FLOW_CONTROL_ERROR."
+ return ConnectionError(ErrCodeFlowControl)
+ }
+ }
+ return nil
+}
+
+func (sc *serverConn) processData(f *DataFrame) error {
+ sc.serveG.check()
+ if sc.inGoAway && sc.goAwayCode != ErrCodeNo {
+ return nil
+ }
+ data := f.Data()
+
+ // "If a DATA frame is received whose stream is not in "open"
+ // or "half closed (local)" state, the recipient MUST respond
+ // with a stream error (Section 5.4.2) of type STREAM_CLOSED."
+ id := f.Header().StreamID
+ state, st := sc.state(id)
+ if id == 0 || state == stateIdle {
+ // Section 5.1: "Receiving any frame other than HEADERS
+ // or PRIORITY on a stream in this state MUST be
+ // treated as a connection error (Section 5.4.1) of
+ // type PROTOCOL_ERROR."
+ return ConnectionError(ErrCodeProtocol)
+ }
+ // RFC 7540, sec 6.1: If a DATA frame is received whose stream is not in
+ // "open" or "half-closed (local)" state, the recipient MUST respond with a
+ // stream error (Section 5.4.2) of type STREAM_CLOSED.
+ if state == stateClosed {
+ return streamError(id, ErrCodeStreamClosed)
+ }
+ if st == nil || state != stateOpen || st.gotTrailerHeader || st.resetQueued {
+ // This includes sending a RST_STREAM if the stream is
+ // in stateHalfClosedLocal (which currently means that
+ // the http.Handler returned, so it's done reading &
+ // done writing). Try to stop the client from sending
+ // more DATA.
+
+ // But still enforce their connection-level flow control,
+ // and return any flow control bytes since we're not going
+ // to consume them.
+ if sc.inflow.available() < int32(f.Length) {
+ return streamError(id, ErrCodeFlowControl)
+ }
+ // Deduct the flow control from inflow, since we're
+ // going to immediately add it back in
+ // sendWindowUpdate, which also schedules sending the
+ // frames.
+ sc.inflow.take(int32(f.Length))
+ sc.sendWindowUpdate(nil, int(f.Length)) // conn-level
+
+ if st != nil && st.resetQueued {
+ // Already have a stream error in flight. Don't send another.
+ return nil
+ }
+ return streamError(id, ErrCodeStreamClosed)
+ }
+ if st.body == nil {
+ panic("internal error: should have a body in this state")
+ }
+
+ // Sender sending more than they'd declared?
+ if st.declBodyBytes != -1 && st.bodyBytes+int64(len(data)) > st.declBodyBytes {
+ st.body.CloseWithError(fmt.Errorf("sender tried to send more than declared Content-Length of %d bytes", st.declBodyBytes))
+ // RFC 7540, sec 8.1.2.6: A request or response is also malformed if the
+ // value of a content-length header field does not equal the sum of the
+ // DATA frame payload lengths that form the body.
+ return streamError(id, ErrCodeProtocol)
+ }
+ if f.Length > 0 {
+ // Check whether the client has flow control quota.
+ if st.inflow.available() < int32(f.Length) {
+ return streamError(id, ErrCodeFlowControl)
+ }
+ st.inflow.take(int32(f.Length))
+
+ if len(data) > 0 {
+ wrote, err := st.body.Write(data)
+ if err != nil {
+ return streamError(id, ErrCodeStreamClosed)
+ }
+ if wrote != len(data) {
+ panic("internal error: bad Writer")
+ }
+ st.bodyBytes += int64(len(data))
+ }
+
+ // Return any padded flow control now, since we won't
+ // refund it later on body reads.
+ if pad := int32(f.Length) - int32(len(data)); pad > 0 {
+ sc.sendWindowUpdate32(nil, pad)
+ sc.sendWindowUpdate32(st, pad)
+ }
+ }
+ if f.StreamEnded() {
+ st.endStream()
+ }
+ return nil
+}
+
+func (sc *serverConn) processGoAway(f *GoAwayFrame) error {
+ sc.serveG.check()
+ if f.ErrCode != ErrCodeNo {
+ sc.logf("http2: received GOAWAY %+v, starting graceful shutdown", f)
+ } else {
+ sc.vlogf("http2: received GOAWAY %+v, starting graceful shutdown", f)
+ }
+ sc.startGracefulShutdownInternal()
+ // http://tools.ietf.org/html/rfc7540#section-6.8
+ // We should not create any new streams, which means we should disable push.
+ sc.pushEnabled = false
+ return nil
+}
+
+// isPushed reports whether the stream is server-initiated.
+func (st *stream) isPushed() bool {
+ return st.id%2 == 0
+}
+
+// endStream closes a Request.Body's pipe. It is called when a DATA
+// frame says a request body is over (or after trailers).
+func (st *stream) endStream() {
+ sc := st.sc
+ sc.serveG.check()
+
+ if st.declBodyBytes != -1 && st.declBodyBytes != st.bodyBytes {
+ st.body.CloseWithError(fmt.Errorf("request declared a Content-Length of %d but only wrote %d bytes",
+ st.declBodyBytes, st.bodyBytes))
+ } else {
+ st.body.closeWithErrorAndCode(io.EOF, st.copyTrailersToHandlerRequest)
+ st.body.CloseWithError(io.EOF)
+ }
+ st.state = stateHalfClosedRemote
+}
+
+// copyTrailersToHandlerRequest is run in the Handler's goroutine in
+// its Request.Body.Read just before it gets io.EOF.
+func (st *stream) copyTrailersToHandlerRequest() {
+ for k, vv := range st.trailer {
+ if _, ok := st.reqTrailer[k]; ok {
+ // Only copy it over it was pre-declared.
+ st.reqTrailer[k] = vv
+ }
+ }
+}
+
+// onWriteTimeout is run on its own goroutine (from time.AfterFunc)
+// when the stream's WriteTimeout has fired.
+func (st *stream) onWriteTimeout() {
+ st.sc.writeFrameFromHandler(FrameWriteRequest{write: streamError(st.id, ErrCodeInternal)})
+}
+
+func (sc *serverConn) processHeaders(f *MetaHeadersFrame) error {
+ sc.serveG.check()
+ id := f.StreamID
+ if sc.inGoAway {
+ // Ignore.
+ return nil
+ }
+ // http://tools.ietf.org/html/rfc7540#section-5.1.1
+ // Streams initiated by a client MUST use odd-numbered stream
+ // identifiers. [...] An endpoint that receives an unexpected
+ // stream identifier MUST respond with a connection error
+ // (Section 5.4.1) of type PROTOCOL_ERROR.
+ if id%2 != 1 {
+ return ConnectionError(ErrCodeProtocol)
+ }
+ // A HEADERS frame can be used to create a new stream or
+ // send a trailer for an open one. If we already have a stream
+ // open, let it process its own HEADERS frame (trailers at this
+ // point, if it's valid).
+ if st := sc.streams[f.StreamID]; st != nil {
+ if st.resetQueued {
+ // We're sending RST_STREAM to close the stream, so don't bother
+ // processing this frame.
+ return nil
+ }
+ // RFC 7540, sec 5.1: If an endpoint receives additional frames, other than
+ // WINDOW_UPDATE, PRIORITY, or RST_STREAM, for a stream that is in
+ // this state, it MUST respond with a stream error (Section 5.4.2) of
+ // type STREAM_CLOSED.
+ if st.state == stateHalfClosedRemote {
+ return streamError(id, ErrCodeStreamClosed)
+ }
+ return st.processTrailerHeaders(f)
+ }
+
+ // [...] The identifier of a newly established stream MUST be
+ // numerically greater than all streams that the initiating
+ // endpoint has opened or reserved. [...] An endpoint that
+ // receives an unexpected stream identifier MUST respond with
+ // a connection error (Section 5.4.1) of type PROTOCOL_ERROR.
+ if id <= sc.maxClientStreamID {
+ return ConnectionError(ErrCodeProtocol)
+ }
+ sc.maxClientStreamID = id
+
+ if sc.idleTimer != nil {
+ sc.idleTimer.Stop()
+ }
+
+ // http://tools.ietf.org/html/rfc7540#section-5.1.2
+ // [...] Endpoints MUST NOT exceed the limit set by their peer. An
+ // endpoint that receives a HEADERS frame that causes their
+ // advertised concurrent stream limit to be exceeded MUST treat
+ // this as a stream error (Section 5.4.2) of type PROTOCOL_ERROR
+ // or REFUSED_STREAM.
+ if sc.curClientStreams+1 > sc.advMaxStreams {
+ if sc.unackedSettings == 0 {
+ // They should know better.
+ return streamError(id, ErrCodeProtocol)
+ }
+ // Assume it's a network race, where they just haven't
+ // received our last SETTINGS update. But actually
+ // this can't happen yet, because we don't yet provide
+ // a way for users to adjust server parameters at
+ // runtime.
+ return streamError(id, ErrCodeRefusedStream)
+ }
+
+ initialState := stateOpen
+ if f.StreamEnded() {
+ initialState = stateHalfClosedRemote
+ }
+ st := sc.newStream(id, 0, initialState)
+
+ if f.HasPriority() {
+ if err := checkPriority(f.StreamID, f.Priority); err != nil {
+ return err
+ }
+ sc.writeSched.AdjustStream(st.id, f.Priority)
+ }
+
+ rw, req, err := sc.newWriterAndRequest(st, f)
+ if err != nil {
+ return err
+ }
+ st.reqTrailer = req.Trailer
+ if st.reqTrailer != nil {
+ st.trailer = make(http.Header)
+ }
+ st.body = req.Body.(*requestBody).pipe // may be nil
+ st.declBodyBytes = req.ContentLength
+
+ handler := sc.handler.ServeHTTP
+ if f.Truncated {
+ // Their header list was too long. Send a 431 error.
+ handler = handleHeaderListTooLong
+ } else if err := checkValidHTTP2RequestHeaders(req.Header); err != nil {
+ handler = new400Handler(err)
+ }
+
+ // The net/http package sets the read deadline from the
+ // http.Server.ReadTimeout during the TLS handshake, but then
+ // passes the connection off to us with the deadline already
+ // set. Disarm it here after the request headers are read,
+ // similar to how the http1 server works. Here it's
+ // technically more like the http1 Server's ReadHeaderTimeout
+ // (in Go 1.8), though. That's a more sane option anyway.
+ if sc.hs.ReadTimeout != 0 {
+ sc.conn.SetReadDeadline(time.Time{})
+ }
+
+ go sc.runHandler(rw, req, handler)
+ return nil
+}
+
+func (st *stream) processTrailerHeaders(f *MetaHeadersFrame) error {
+ sc := st.sc
+ sc.serveG.check()
+ if st.gotTrailerHeader {
+ return ConnectionError(ErrCodeProtocol)
+ }
+ st.gotTrailerHeader = true
+ if !f.StreamEnded() {
+ return streamError(st.id, ErrCodeProtocol)
+ }
+
+ if len(f.PseudoFields()) > 0 {
+ return streamError(st.id, ErrCodeProtocol)
+ }
+ if st.trailer != nil {
+ for _, hf := range f.RegularFields() {
+ key := sc.canonicalHeader(hf.Name)
+ if !httpguts.ValidTrailerHeader(key) {
+ // TODO: send more details to the peer somehow. But http2 has
+ // no way to send debug data at a stream level. Discuss with
+ // HTTP folk.
+ return streamError(st.id, ErrCodeProtocol)
+ }
+ st.trailer[key] = append(st.trailer[key], hf.Value)
+ }
+ }
+ st.endStream()
+ return nil
+}
+
+func checkPriority(streamID uint32, p PriorityParam) error {
+ if streamID == p.StreamDep {
+ // Section 5.3.1: "A stream cannot depend on itself. An endpoint MUST treat
+ // this as a stream error (Section 5.4.2) of type PROTOCOL_ERROR."
+ // Section 5.3.3 says that a stream can depend on one of its dependencies,
+ // so it's only self-dependencies that are forbidden.
+ return streamError(streamID, ErrCodeProtocol)
+ }
+ return nil
+}
+
+func (sc *serverConn) processPriority(f *PriorityFrame) error {
+ if sc.inGoAway {
+ return nil
+ }
+ if err := checkPriority(f.StreamID, f.PriorityParam); err != nil {
+ return err
+ }
+ sc.writeSched.AdjustStream(f.StreamID, f.PriorityParam)
+ return nil
+}
+
+func (sc *serverConn) newStream(id, pusherID uint32, state streamState) *stream {
+ sc.serveG.check()
+ if id == 0 {
+ panic("internal error: cannot create stream with id 0")
+ }
+
+ ctx, cancelCtx := context.WithCancel(sc.baseCtx)
+ st := &stream{
+ sc: sc,
+ id: id,
+ state: state,
+ ctx: ctx,
+ cancelCtx: cancelCtx,
+ }
+ st.cw.Init()
+ st.flow.conn = &sc.flow // link to conn-level counter
+ st.flow.add(sc.initialStreamSendWindowSize)
+ st.inflow.conn = &sc.inflow // link to conn-level counter
+ st.inflow.add(sc.srv.initialStreamRecvWindowSize())
+ if sc.hs.WriteTimeout != 0 {
+ st.writeDeadline = time.AfterFunc(sc.hs.WriteTimeout, st.onWriteTimeout)
+ }
+
+ sc.streams[id] = st
+ sc.writeSched.OpenStream(st.id, OpenStreamOptions{PusherID: pusherID})
+ if st.isPushed() {
+ sc.curPushedStreams++
+ } else {
+ sc.curClientStreams++
+ }
+ if sc.curOpenStreams() == 1 {
+ sc.setConnState(http.StateActive)
+ }
+
+ return st
+}
+
+func (sc *serverConn) newWriterAndRequest(st *stream, f *MetaHeadersFrame) (*responseWriter, *http.Request, error) {
+ sc.serveG.check()
+
+ rp := requestParam{
+ method: f.PseudoValue("method"),
+ scheme: f.PseudoValue("scheme"),
+ authority: f.PseudoValue("authority"),
+ path: f.PseudoValue("path"),
+ }
+
+ isConnect := rp.method == "CONNECT"
+ if isConnect {
+ if rp.path != "" || rp.scheme != "" || rp.authority == "" {
+ return nil, nil, streamError(f.StreamID, ErrCodeProtocol)
+ }
+ } else if rp.method == "" || rp.path == "" || (rp.scheme != "https" && rp.scheme != "http") {
+ // See 8.1.2.6 Malformed Requests and Responses:
+ //
+ // Malformed requests or responses that are detected
+ // MUST be treated as a stream error (Section 5.4.2)
+ // of type PROTOCOL_ERROR."
+ //
+ // 8.1.2.3 Request Pseudo-Header Fields
+ // "All HTTP/2 requests MUST include exactly one valid
+ // value for the :method, :scheme, and :path
+ // pseudo-header fields"
+ return nil, nil, streamError(f.StreamID, ErrCodeProtocol)
+ }
+
+ bodyOpen := !f.StreamEnded()
+ if rp.method == "HEAD" && bodyOpen {
+ // HEAD requests can't have bodies
+ return nil, nil, streamError(f.StreamID, ErrCodeProtocol)
+ }
+
+ rp.header = make(http.Header)
+ for _, hf := range f.RegularFields() {
+ rp.header.Add(sc.canonicalHeader(hf.Name), hf.Value)
+ }
+ if rp.authority == "" {
+ rp.authority = rp.header.Get("Host")
+ }
+
+ rw, req, err := sc.newWriterAndRequestNoBody(st, rp)
+ if err != nil {
+ return nil, nil, err
+ }
+ if bodyOpen {
+ if vv, ok := rp.header["Content-Length"]; ok {
+ req.ContentLength, _ = strconv.ParseInt(vv[0], 10, 64)
+ } else {
+ req.ContentLength = -1
+ }
+ req.Body.(*requestBody).pipe = &pipe{
+ b: &dataBuffer{expected: req.ContentLength},
+ }
+ }
+ return rw, req, nil
+}
+
+type requestParam struct {
+ method string
+ scheme, authority, path string
+ header http.Header
+}
+
+func (sc *serverConn) newWriterAndRequestNoBody(st *stream, rp requestParam) (*responseWriter, *http.Request, error) {
+ sc.serveG.check()
+
+ var tlsState *tls.ConnectionState // nil if not scheme https
+ if rp.scheme == "https" {
+ tlsState = sc.tlsState
+ }
+
+ needsContinue := rp.header.Get("Expect") == "100-continue"
+ if needsContinue {
+ rp.header.Del("Expect")
+ }
+ // Merge Cookie headers into one "; "-delimited value.
+ if cookies := rp.header["Cookie"]; len(cookies) > 1 {
+ rp.header.Set("Cookie", strings.Join(cookies, "; "))
+ }
+
+ // Setup Trailers
+ var trailer http.Header
+ for _, v := range rp.header["Trailer"] {
+ for _, key := range strings.Split(v, ",") {
+ key = http.CanonicalHeaderKey(strings.TrimSpace(key))
+ switch key {
+ case "Transfer-Encoding", "Trailer", "Content-Length":
+ // Bogus. (copy of http1 rules)
+ // Ignore.
+ default:
+ if trailer == nil {
+ trailer = make(http.Header)
+ }
+ trailer[key] = nil
+ }
+ }
+ }
+ delete(rp.header, "Trailer")
+
+ var url_ *url.URL
+ var requestURI string
+ if rp.method == "CONNECT" {
+ url_ = &url.URL{Host: rp.authority}
+ requestURI = rp.authority // mimic HTTP/1 server behavior
+ } else {
+ var err error
+ url_, err = url.ParseRequestURI(rp.path)
+ if err != nil {
+ return nil, nil, streamError(st.id, ErrCodeProtocol)
+ }
+ requestURI = rp.path
+ }
+
+ body := &requestBody{
+ conn: sc,
+ stream: st,
+ needsContinue: needsContinue,
+ }
+ req := &http.Request{
+ Method: rp.method,
+ URL: url_,
+ RemoteAddr: sc.remoteAddrStr,
+ Header: rp.header,
+ RequestURI: requestURI,
+ Proto: "HTTP/2.0",
+ ProtoMajor: 2,
+ ProtoMinor: 0,
+ TLS: tlsState,
+ Host: rp.authority,
+ Body: body,
+ Trailer: trailer,
+ }
+ req = req.WithContext(st.ctx)
+
+ rws := responseWriterStatePool.Get().(*responseWriterState)
+ bwSave := rws.bw
+ *rws = responseWriterState{} // zero all the fields
+ rws.conn = sc
+ rws.bw = bwSave
+ rws.bw.Reset(chunkWriter{rws})
+ rws.stream = st
+ rws.req = req
+ rws.body = body
+
+ rw := &responseWriter{rws: rws}
+ return rw, req, nil
+}
+
+// Run on its own goroutine.
+func (sc *serverConn) runHandler(rw *responseWriter, req *http.Request, handler func(http.ResponseWriter, *http.Request)) {
+ didPanic := true
+ defer func() {
+ rw.rws.stream.cancelCtx()
+ if didPanic {
+ e := recover()
+ sc.writeFrameFromHandler(FrameWriteRequest{
+ write: handlerPanicRST{rw.rws.stream.id},
+ stream: rw.rws.stream,
+ })
+ // Same as net/http:
+ if e != nil && e != http.ErrAbortHandler {
+ const size = 64 << 10
+ buf := make([]byte, size)
+ buf = buf[:runtime.Stack(buf, false)]
+ sc.logf("http2: panic serving %v: %v\n%s", sc.conn.RemoteAddr(), e, buf)
+ }
+ return
+ }
+ rw.handlerDone()
+ }()
+ handler(rw, req)
+ didPanic = false
+}
+
+func handleHeaderListTooLong(w http.ResponseWriter, r *http.Request) {
+ // 10.5.1 Limits on Header Block Size:
+ // .. "A server that receives a larger header block than it is
+ // willing to handle can send an HTTP 431 (Request Header Fields Too
+ // Large) status code"
+ const statusRequestHeaderFieldsTooLarge = 431 // only in Go 1.6+
+ w.WriteHeader(statusRequestHeaderFieldsTooLarge)
+ io.WriteString(w, "<h1>HTTP Error 431</h1><p>Request Header Field(s) Too Large</p>")
+}
+
+// called from handler goroutines.
+// h may be nil.
+func (sc *serverConn) writeHeaders(st *stream, headerData *writeResHeaders) error {
+ sc.serveG.checkNotOn() // NOT on
+ var errc chan error
+ if headerData.h != nil {
+ // If there's a header map (which we don't own), so we have to block on
+ // waiting for this frame to be written, so an http.Flush mid-handler
+ // writes out the correct value of keys, before a handler later potentially
+ // mutates it.
+ errc = errChanPool.Get().(chan error)
+ }
+ if err := sc.writeFrameFromHandler(FrameWriteRequest{
+ write: headerData,
+ stream: st,
+ done: errc,
+ }); err != nil {
+ return err
+ }
+ if errc != nil {
+ select {
+ case err := <-errc:
+ errChanPool.Put(errc)
+ return err
+ case <-sc.doneServing:
+ return errClientDisconnected
+ case <-st.cw:
+ return errStreamClosed
+ }
+ }
+ return nil
+}
+
+// called from handler goroutines.
+func (sc *serverConn) write100ContinueHeaders(st *stream) {
+ sc.writeFrameFromHandler(FrameWriteRequest{
+ write: write100ContinueHeadersFrame{st.id},
+ stream: st,
+ })
+}
+
+// A bodyReadMsg tells the server loop that the http.Handler read n
+// bytes of the DATA from the client on the given stream.
+type bodyReadMsg struct {
+ st *stream
+ n int
+}
+
+// called from handler goroutines.
+// Notes that the handler for the given stream ID read n bytes of its body
+// and schedules flow control tokens to be sent.
+func (sc *serverConn) noteBodyReadFromHandler(st *stream, n int, err error) {
+ sc.serveG.checkNotOn() // NOT on
+ if n > 0 {
+ select {
+ case sc.bodyReadCh <- bodyReadMsg{st, n}:
+ case <-sc.doneServing:
+ }
+ }
+}
+
+func (sc *serverConn) noteBodyRead(st *stream, n int) {
+ sc.serveG.check()
+ sc.sendWindowUpdate(nil, n) // conn-level
+ if st.state != stateHalfClosedRemote && st.state != stateClosed {
+ // Don't send this WINDOW_UPDATE if the stream is closed
+ // remotely.
+ sc.sendWindowUpdate(st, n)
+ }
+}
+
+// st may be nil for conn-level
+func (sc *serverConn) sendWindowUpdate(st *stream, n int) {
+ sc.serveG.check()
+ // "The legal range for the increment to the flow control
+ // window is 1 to 2^31-1 (2,147,483,647) octets."
+ // A Go Read call on 64-bit machines could in theory read
+ // a larger Read than this. Very unlikely, but we handle it here
+ // rather than elsewhere for now.
+ const maxUint31 = 1<<31 - 1
+ for n >= maxUint31 {
+ sc.sendWindowUpdate32(st, maxUint31)
+ n -= maxUint31
+ }
+ sc.sendWindowUpdate32(st, int32(n))
+}
+
+// st may be nil for conn-level
+func (sc *serverConn) sendWindowUpdate32(st *stream, n int32) {
+ sc.serveG.check()
+ if n == 0 {
+ return
+ }
+ if n < 0 {
+ panic("negative update")
+ }
+ var streamID uint32
+ if st != nil {
+ streamID = st.id
+ }
+ sc.writeFrame(FrameWriteRequest{
+ write: writeWindowUpdate{streamID: streamID, n: uint32(n)},
+ stream: st,
+ })
+ var ok bool
+ if st == nil {
+ ok = sc.inflow.add(n)
+ } else {
+ ok = st.inflow.add(n)
+ }
+ if !ok {
+ panic("internal error; sent too many window updates without decrements?")
+ }
+}
+
+// requestBody is the Handler's Request.Body type.
+// Read and Close may be called concurrently.
+type requestBody struct {
+ stream *stream
+ conn *serverConn
+ closed bool // for use by Close only
+ sawEOF bool // for use by Read only
+ pipe *pipe // non-nil if we have a HTTP entity message body
+ needsContinue bool // need to send a 100-continue
+}
+
+func (b *requestBody) Close() error {
+ if b.pipe != nil && !b.closed {
+ b.pipe.BreakWithError(errClosedBody)
+ }
+ b.closed = true
+ return nil
+}
+
+func (b *requestBody) Read(p []byte) (n int, err error) {
+ if b.needsContinue {
+ b.needsContinue = false
+ b.conn.write100ContinueHeaders(b.stream)
+ }
+ if b.pipe == nil || b.sawEOF {
+ return 0, io.EOF
+ }
+ n, err = b.pipe.Read(p)
+ if err == io.EOF {
+ b.sawEOF = true
+ }
+ if b.conn == nil && inTests {
+ return
+ }
+ b.conn.noteBodyReadFromHandler(b.stream, n, err)
+ return
+}
+
+// responseWriter is the http.ResponseWriter implementation. It's
+// intentionally small (1 pointer wide) to minimize garbage. The
+// responseWriterState pointer inside is zeroed at the end of a
+// request (in handlerDone) and calls on the responseWriter thereafter
+// simply crash (caller's mistake), but the much larger responseWriterState
+// and buffers are reused between multiple requests.
+type responseWriter struct {
+ rws *responseWriterState
+}
+
+// Optional http.ResponseWriter interfaces implemented.
+var (
+ _ http.CloseNotifier = (*responseWriter)(nil)
+ _ http.Flusher = (*responseWriter)(nil)
+ _ stringWriter = (*responseWriter)(nil)
+)
+
+type responseWriterState struct {
+ // immutable within a request:
+ stream *stream
+ req *http.Request
+ body *requestBody // to close at end of request, if DATA frames didn't
+ conn *serverConn
+
+ // TODO: adjust buffer writing sizes based on server config, frame size updates from peer, etc
+ bw *bufio.Writer // writing to a chunkWriter{this *responseWriterState}
+
+ // mutated by http.Handler goroutine:
+ handlerHeader http.Header // nil until called
+ snapHeader http.Header // snapshot of handlerHeader at WriteHeader time
+ trailers []string // set in writeChunk
+ status int // status code passed to WriteHeader
+ wroteHeader bool // WriteHeader called (explicitly or implicitly). Not necessarily sent to user yet.
+ sentHeader bool // have we sent the header frame?
+ handlerDone bool // handler has finished
+ dirty bool // a Write failed; don't reuse this responseWriterState
+
+ sentContentLen int64 // non-zero if handler set a Content-Length header
+ wroteBytes int64
+
+ closeNotifierMu sync.Mutex // guards closeNotifierCh
+ closeNotifierCh chan bool // nil until first used
+}
+
+type chunkWriter struct{ rws *responseWriterState }
+
+func (cw chunkWriter) Write(p []byte) (n int, err error) { return cw.rws.writeChunk(p) }
+
+func (rws *responseWriterState) hasTrailers() bool { return len(rws.trailers) != 0 }
+
+// declareTrailer is called for each Trailer header when the
+// response header is written. It notes that a header will need to be
+// written in the trailers at the end of the response.
+func (rws *responseWriterState) declareTrailer(k string) {
+ k = http.CanonicalHeaderKey(k)
+ if !httpguts.ValidTrailerHeader(k) {
+ // Forbidden by RFC 7230, section 4.1.2.
+ rws.conn.logf("ignoring invalid trailer %q", k)
+ return
+ }
+ if !strSliceContains(rws.trailers, k) {
+ rws.trailers = append(rws.trailers, k)
+ }
+}
+
+// writeChunk writes chunks from the bufio.Writer. But because
+// bufio.Writer may bypass its chunking, sometimes p may be
+// arbitrarily large.
+//
+// writeChunk is also responsible (on the first chunk) for sending the
+// HEADER response.
+func (rws *responseWriterState) writeChunk(p []byte) (n int, err error) {
+ if !rws.wroteHeader {
+ rws.writeHeader(200)
+ }
+
+ isHeadResp := rws.req.Method == "HEAD"
+ if !rws.sentHeader {
+ rws.sentHeader = true
+ var ctype, clen string
+ if clen = rws.snapHeader.Get("Content-Length"); clen != "" {
+ rws.snapHeader.Del("Content-Length")
+ clen64, err := strconv.ParseInt(clen, 10, 64)
+ if err == nil && clen64 >= 0 {
+ rws.sentContentLen = clen64
+ } else {
+ clen = ""
+ }
+ }
+ if clen == "" && rws.handlerDone && bodyAllowedForStatus(rws.status) && (len(p) > 0 || !isHeadResp) {
+ clen = strconv.Itoa(len(p))
+ }
+ _, hasContentType := rws.snapHeader["Content-Type"]
+ if !hasContentType && bodyAllowedForStatus(rws.status) && len(p) > 0 {
+ ctype = http.DetectContentType(p)
+ }
+ var date string
+ if _, ok := rws.snapHeader["Date"]; !ok {
+ // TODO(bradfitz): be faster here, like net/http? measure.
+ date = time.Now().UTC().Format(http.TimeFormat)
+ }
+
+ for _, v := range rws.snapHeader["Trailer"] {
+ foreachHeaderElement(v, rws.declareTrailer)
+ }
+
+ // "Connection" headers aren't allowed in HTTP/2 (RFC 7540, 8.1.2.2),
+ // but respect "Connection" == "close" to mean sending a GOAWAY and tearing
+ // down the TCP connection when idle, like we do for HTTP/1.
+ // TODO: remove more Connection-specific header fields here, in addition
+ // to "Connection".
+ if _, ok := rws.snapHeader["Connection"]; ok {
+ v := rws.snapHeader.Get("Connection")
+ delete(rws.snapHeader, "Connection")
+ if v == "close" {
+ rws.conn.startGracefulShutdown()
+ }
+ }
+
+ endStream := (rws.handlerDone && !rws.hasTrailers() && len(p) == 0) || isHeadResp
+ err = rws.conn.writeHeaders(rws.stream, &writeResHeaders{
+ streamID: rws.stream.id,
+ httpResCode: rws.status,
+ h: rws.snapHeader,
+ endStream: endStream,
+ contentType: ctype,
+ contentLength: clen,
+ date: date,
+ })
+ if err != nil {
+ rws.dirty = true
+ return 0, err
+ }
+ if endStream {
+ return 0, nil
+ }
+ }
+ if isHeadResp {
+ return len(p), nil
+ }
+ if len(p) == 0 && !rws.handlerDone {
+ return 0, nil
+ }
+
+ if rws.handlerDone {
+ rws.promoteUndeclaredTrailers()
+ }
+
+ endStream := rws.handlerDone && !rws.hasTrailers()
+ if len(p) > 0 || endStream {
+ // only send a 0 byte DATA frame if we're ending the stream.
+ if err := rws.conn.writeDataFromHandler(rws.stream, p, endStream); err != nil {
+ rws.dirty = true
+ return 0, err
+ }
+ }
+
+ if rws.handlerDone && rws.hasTrailers() {
+ err = rws.conn.writeHeaders(rws.stream, &writeResHeaders{
+ streamID: rws.stream.id,
+ h: rws.handlerHeader,
+ trailers: rws.trailers,
+ endStream: true,
+ })
+ if err != nil {
+ rws.dirty = true
+ }
+ return len(p), err
+ }
+ return len(p), nil
+}
+
+// TrailerPrefix is a magic prefix for ResponseWriter.Header map keys
+// that, if present, signals that the map entry is actually for
+// the response trailers, and not the response headers. The prefix
+// is stripped after the ServeHTTP call finishes and the values are
+// sent in the trailers.
+//
+// This mechanism is intended only for trailers that are not known
+// prior to the headers being written. If the set of trailers is fixed
+// or known before the header is written, the normal Go trailers mechanism
+// is preferred:
+// https://golang.org/pkg/net/http/#ResponseWriter
+// https://golang.org/pkg/net/http/#example_ResponseWriter_trailers
+const TrailerPrefix = "Trailer:"
+
+// promoteUndeclaredTrailers permits http.Handlers to set trailers
+// after the header has already been flushed. Because the Go
+// ResponseWriter interface has no way to set Trailers (only the
+// Header), and because we didn't want to expand the ResponseWriter
+// interface, and because nobody used trailers, and because RFC 7230
+// says you SHOULD (but not must) predeclare any trailers in the
+// header, the official ResponseWriter rules said trailers in Go must
+// be predeclared, and then we reuse the same ResponseWriter.Header()
+// map to mean both Headers and Trailers. When it's time to write the
+// Trailers, we pick out the fields of Headers that were declared as
+// trailers. That worked for a while, until we found the first major
+// user of Trailers in the wild: gRPC (using them only over http2),
+// and gRPC libraries permit setting trailers mid-stream without
+// predeclarnig them. So: change of plans. We still permit the old
+// way, but we also permit this hack: if a Header() key begins with
+// "Trailer:", the suffix of that key is a Trailer. Because ':' is an
+// invalid token byte anyway, there is no ambiguity. (And it's already
+// filtered out) It's mildly hacky, but not terrible.
+//
+// This method runs after the Handler is done and promotes any Header
+// fields to be trailers.
+func (rws *responseWriterState) promoteUndeclaredTrailers() {
+ for k, vv := range rws.handlerHeader {
+ if !strings.HasPrefix(k, TrailerPrefix) {
+ continue
+ }
+ trailerKey := strings.TrimPrefix(k, TrailerPrefix)
+ rws.declareTrailer(trailerKey)
+ rws.handlerHeader[http.CanonicalHeaderKey(trailerKey)] = vv
+ }
+
+ if len(rws.trailers) > 1 {
+ sorter := sorterPool.Get().(*sorter)
+ sorter.SortStrings(rws.trailers)
+ sorterPool.Put(sorter)
+ }
+}
+
+func (w *responseWriter) Flush() {
+ rws := w.rws
+ if rws == nil {
+ panic("Header called after Handler finished")
+ }
+ if rws.bw.Buffered() > 0 {
+ if err := rws.bw.Flush(); err != nil {
+ // Ignore the error. The frame writer already knows.
+ return
+ }
+ } else {
+ // The bufio.Writer won't call chunkWriter.Write
+ // (writeChunk with zero bytes, so we have to do it
+ // ourselves to force the HTTP response header and/or
+ // final DATA frame (with END_STREAM) to be sent.
+ rws.writeChunk(nil)
+ }
+}
+
+func (w *responseWriter) CloseNotify() <-chan bool {
+ rws := w.rws
+ if rws == nil {
+ panic("CloseNotify called after Handler finished")
+ }
+ rws.closeNotifierMu.Lock()
+ ch := rws.closeNotifierCh
+ if ch == nil {
+ ch = make(chan bool, 1)
+ rws.closeNotifierCh = ch
+ cw := rws.stream.cw
+ go func() {
+ cw.Wait() // wait for close
+ ch <- true
+ }()
+ }
+ rws.closeNotifierMu.Unlock()
+ return ch
+}
+
+func (w *responseWriter) Header() http.Header {
+ rws := w.rws
+ if rws == nil {
+ panic("Header called after Handler finished")
+ }
+ if rws.handlerHeader == nil {
+ rws.handlerHeader = make(http.Header)
+ }
+ return rws.handlerHeader
+}
+
+// checkWriteHeaderCode is a copy of net/http's checkWriteHeaderCode.
+func checkWriteHeaderCode(code int) {
+ // Issue 22880: require valid WriteHeader status codes.
+ // For now we only enforce that it's three digits.
+ // In the future we might block things over 599 (600 and above aren't defined
+ // at http://httpwg.org/specs/rfc7231.html#status.codes)
+ // and we might block under 200 (once we have more mature 1xx support).
+ // But for now any three digits.
+ //
+ // We used to send "HTTP/1.1 000 0" on the wire in responses but there's
+ // no equivalent bogus thing we can realistically send in HTTP/2,
+ // so we'll consistently panic instead and help people find their bugs
+ // early. (We can't return an error from WriteHeader even if we wanted to.)
+ if code < 100 || code > 999 {
+ panic(fmt.Sprintf("invalid WriteHeader code %v", code))
+ }
+}
+
+func (w *responseWriter) WriteHeader(code int) {
+ rws := w.rws
+ if rws == nil {
+ panic("WriteHeader called after Handler finished")
+ }
+ rws.writeHeader(code)
+}
+
+func (rws *responseWriterState) writeHeader(code int) {
+ if !rws.wroteHeader {
+ checkWriteHeaderCode(code)
+ rws.wroteHeader = true
+ rws.status = code
+ if len(rws.handlerHeader) > 0 {
+ rws.snapHeader = cloneHeader(rws.handlerHeader)
+ }
+ }
+}
+
+func cloneHeader(h http.Header) http.Header {
+ h2 := make(http.Header, len(h))
+ for k, vv := range h {
+ vv2 := make([]string, len(vv))
+ copy(vv2, vv)
+ h2[k] = vv2
+ }
+ return h2
+}
+
+// The Life Of A Write is like this:
+//
+// * Handler calls w.Write or w.WriteString ->
+// * -> rws.bw (*bufio.Writer) ->
+// * (Handler might call Flush)
+// * -> chunkWriter{rws}
+// * -> responseWriterState.writeChunk(p []byte)
+// * -> responseWriterState.writeChunk (most of the magic; see comment there)
+func (w *responseWriter) Write(p []byte) (n int, err error) {
+ return w.write(len(p), p, "")
+}
+
+func (w *responseWriter) WriteString(s string) (n int, err error) {
+ return w.write(len(s), nil, s)
+}
+
+// either dataB or dataS is non-zero.
+func (w *responseWriter) write(lenData int, dataB []byte, dataS string) (n int, err error) {
+ rws := w.rws
+ if rws == nil {
+ panic("Write called after Handler finished")
+ }
+ if !rws.wroteHeader {
+ w.WriteHeader(200)
+ }
+ if !bodyAllowedForStatus(rws.status) {
+ return 0, http.ErrBodyNotAllowed
+ }
+ rws.wroteBytes += int64(len(dataB)) + int64(len(dataS)) // only one can be set
+ if rws.sentContentLen != 0 && rws.wroteBytes > rws.sentContentLen {
+ // TODO: send a RST_STREAM
+ return 0, errors.New("http2: handler wrote more than declared Content-Length")
+ }
+
+ if dataB != nil {
+ return rws.bw.Write(dataB)
+ } else {
+ return rws.bw.WriteString(dataS)
+ }
+}
+
+func (w *responseWriter) handlerDone() {
+ rws := w.rws
+ dirty := rws.dirty
+ rws.handlerDone = true
+ w.Flush()
+ w.rws = nil
+ if !dirty {
+ // Only recycle the pool if all prior Write calls to
+ // the serverConn goroutine completed successfully. If
+ // they returned earlier due to resets from the peer
+ // there might still be write goroutines outstanding
+ // from the serverConn referencing the rws memory. See
+ // issue 20704.
+ responseWriterStatePool.Put(rws)
+ }
+}
+
+// Push errors.
+var (
+ ErrRecursivePush = errors.New("http2: recursive push not allowed")
+ ErrPushLimitReached = errors.New("http2: push would exceed peer's SETTINGS_MAX_CONCURRENT_STREAMS")
+)
+
+var _ http.Pusher = (*responseWriter)(nil)
+
+func (w *responseWriter) Push(target string, opts *http.PushOptions) error {
+ st := w.rws.stream
+ sc := st.sc
+ sc.serveG.checkNotOn()
+
+ // No recursive pushes: "PUSH_PROMISE frames MUST only be sent on a peer-initiated stream."
+ // http://tools.ietf.org/html/rfc7540#section-6.6
+ if st.isPushed() {
+ return ErrRecursivePush
+ }
+
+ if opts == nil {
+ opts = new(http.PushOptions)
+ }
+
+ // Default options.
+ if opts.Method == "" {
+ opts.Method = "GET"
+ }
+ if opts.Header == nil {
+ opts.Header = http.Header{}
+ }
+ wantScheme := "http"
+ if w.rws.req.TLS != nil {
+ wantScheme = "https"
+ }
+
+ // Validate the request.
+ u, err := url.Parse(target)
+ if err != nil {
+ return err
+ }
+ if u.Scheme == "" {
+ if !strings.HasPrefix(target, "/") {
+ return fmt.Errorf("target must be an absolute URL or an absolute path: %q", target)
+ }
+ u.Scheme = wantScheme
+ u.Host = w.rws.req.Host
+ } else {
+ if u.Scheme != wantScheme {
+ return fmt.Errorf("cannot push URL with scheme %q from request with scheme %q", u.Scheme, wantScheme)
+ }
+ if u.Host == "" {
+ return errors.New("URL must have a host")
+ }
+ }
+ for k := range opts.Header {
+ if strings.HasPrefix(k, ":") {
+ return fmt.Errorf("promised request headers cannot include pseudo header %q", k)
+ }
+ // These headers are meaningful only if the request has a body,
+ // but PUSH_PROMISE requests cannot have a body.
+ // http://tools.ietf.org/html/rfc7540#section-8.2
+ // Also disallow Host, since the promised URL must be absolute.
+ switch strings.ToLower(k) {
+ case "content-length", "content-encoding", "trailer", "te", "expect", "host":
+ return fmt.Errorf("promised request headers cannot include %q", k)
+ }
+ }
+ if err := checkValidHTTP2RequestHeaders(opts.Header); err != nil {
+ return err
+ }
+
+ // The RFC effectively limits promised requests to GET and HEAD:
+ // "Promised requests MUST be cacheable [GET, HEAD, or POST], and MUST be safe [GET or HEAD]"
+ // http://tools.ietf.org/html/rfc7540#section-8.2
+ if opts.Method != "GET" && opts.Method != "HEAD" {
+ return fmt.Errorf("method %q must be GET or HEAD", opts.Method)
+ }
+
+ msg := &startPushRequest{
+ parent: st,
+ method: opts.Method,
+ url: u,
+ header: cloneHeader(opts.Header),
+ done: errChanPool.Get().(chan error),
+ }
+
+ select {
+ case <-sc.doneServing:
+ return errClientDisconnected
+ case <-st.cw:
+ return errStreamClosed
+ case sc.serveMsgCh <- msg:
+ }
+
+ select {
+ case <-sc.doneServing:
+ return errClientDisconnected
+ case <-st.cw:
+ return errStreamClosed
+ case err := <-msg.done:
+ errChanPool.Put(msg.done)
+ return err
+ }
+}
+
+type startPushRequest struct {
+ parent *stream
+ method string
+ url *url.URL
+ header http.Header
+ done chan error
+}
+
+func (sc *serverConn) startPush(msg *startPushRequest) {
+ sc.serveG.check()
+
+ // http://tools.ietf.org/html/rfc7540#section-6.6.
+ // PUSH_PROMISE frames MUST only be sent on a peer-initiated stream that
+ // is in either the "open" or "half-closed (remote)" state.
+ if msg.parent.state != stateOpen && msg.parent.state != stateHalfClosedRemote {
+ // responseWriter.Push checks that the stream is peer-initiaed.
+ msg.done <- errStreamClosed
+ return
+ }
+
+ // http://tools.ietf.org/html/rfc7540#section-6.6.
+ if !sc.pushEnabled {
+ msg.done <- http.ErrNotSupported
+ return
+ }
+
+ // PUSH_PROMISE frames must be sent in increasing order by stream ID, so
+ // we allocate an ID for the promised stream lazily, when the PUSH_PROMISE
+ // is written. Once the ID is allocated, we start the request handler.
+ allocatePromisedID := func() (uint32, error) {
+ sc.serveG.check()
+
+ // Check this again, just in case. Technically, we might have received
+ // an updated SETTINGS by the time we got around to writing this frame.
+ if !sc.pushEnabled {
+ return 0, http.ErrNotSupported
+ }
+ // http://tools.ietf.org/html/rfc7540#section-6.5.2.
+ if sc.curPushedStreams+1 > sc.clientMaxStreams {
+ return 0, ErrPushLimitReached
+ }
+
+ // http://tools.ietf.org/html/rfc7540#section-5.1.1.
+ // Streams initiated by the server MUST use even-numbered identifiers.
+ // A server that is unable to establish a new stream identifier can send a GOAWAY
+ // frame so that the client is forced to open a new connection for new streams.
+ if sc.maxPushPromiseID+2 >= 1<<31 {
+ sc.startGracefulShutdownInternal()
+ return 0, ErrPushLimitReached
+ }
+ sc.maxPushPromiseID += 2
+ promisedID := sc.maxPushPromiseID
+
+ // http://tools.ietf.org/html/rfc7540#section-8.2.
+ // Strictly speaking, the new stream should start in "reserved (local)", then
+ // transition to "half closed (remote)" after sending the initial HEADERS, but
+ // we start in "half closed (remote)" for simplicity.
+ // See further comments at the definition of stateHalfClosedRemote.
+ promised := sc.newStream(promisedID, msg.parent.id, stateHalfClosedRemote)
+ rw, req, err := sc.newWriterAndRequestNoBody(promised, requestParam{
+ method: msg.method,
+ scheme: msg.url.Scheme,
+ authority: msg.url.Host,
+ path: msg.url.RequestURI(),
+ header: cloneHeader(msg.header), // clone since handler runs concurrently with writing the PUSH_PROMISE
+ })
+ if err != nil {
+ // Should not happen, since we've already validated msg.url.
+ panic(fmt.Sprintf("newWriterAndRequestNoBody(%+v): %v", msg.url, err))
+ }
+
+ go sc.runHandler(rw, req, sc.handler.ServeHTTP)
+ return promisedID, nil
+ }
+
+ sc.writeFrame(FrameWriteRequest{
+ write: &writePushPromise{
+ streamID: msg.parent.id,
+ method: msg.method,
+ url: msg.url,
+ h: msg.header,
+ allocatePromisedID: allocatePromisedID,
+ },
+ stream: msg.parent,
+ done: msg.done,
+ })
+}
+
+// foreachHeaderElement splits v according to the "#rule" construction
+// in RFC 7230 section 7 and calls fn for each non-empty element.
+func foreachHeaderElement(v string, fn func(string)) {
+ v = textproto.TrimString(v)
+ if v == "" {
+ return
+ }
+ if !strings.Contains(v, ",") {
+ fn(v)
+ return
+ }
+ for _, f := range strings.Split(v, ",") {
+ if f = textproto.TrimString(f); f != "" {
+ fn(f)
+ }
+ }
+}
+
+// From http://httpwg.org/specs/rfc7540.html#rfc.section.8.1.2.2
+var connHeaders = []string{
+ "Connection",
+ "Keep-Alive",
+ "Proxy-Connection",
+ "Transfer-Encoding",
+ "Upgrade",
+}
+
+// checkValidHTTP2RequestHeaders checks whether h is a valid HTTP/2 request,
+// per RFC 7540 Section 8.1.2.2.
+// The returned error is reported to users.
+func checkValidHTTP2RequestHeaders(h http.Header) error {
+ for _, k := range connHeaders {
+ if _, ok := h[k]; ok {
+ return fmt.Errorf("request header %q is not valid in HTTP/2", k)
+ }
+ }
+ te := h["Te"]
+ if len(te) > 0 && (len(te) > 1 || (te[0] != "trailers" && te[0] != "")) {
+ return errors.New(`request header "TE" may only be "trailers" in HTTP/2`)
+ }
+ return nil
+}
+
+func new400Handler(err error) http.HandlerFunc {
+ return func(w http.ResponseWriter, r *http.Request) {
+ http.Error(w, err.Error(), http.StatusBadRequest)
+ }
+}
+
+// h1ServerKeepAlivesDisabled reports whether hs has its keep-alives
+// disabled. See comments on h1ServerShutdownChan above for why
+// the code is written this way.
+func h1ServerKeepAlivesDisabled(hs *http.Server) bool {
+ var x interface{} = hs
+ type I interface {
+ doKeepAlives() bool
+ }
+ if hs, ok := x.(I); ok {
+ return !hs.doKeepAlives()
+ }
+ return false
+}