blob: 628e2e59f2eb18e0de0f1f784460ff1f2170e399 [file] [log] [blame]
/*
* Copyright 2018-present Open Networking Foundation
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
* http://www.apache.org/licenses/LICENSE-2.0
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package adaptercore
import (
"context"
"fmt"
"github.com/gogo/protobuf/proto"
com "github.com/opencord/voltha-go/adapters/common"
"github.com/opencord/voltha-go/common/log"
ic "github.com/opencord/voltha-protos/go/inter_container"
of "github.com/opencord/voltha-protos/go/openflow_13"
"github.com/opencord/voltha-protos/go/voltha"
"strconv"
"strings"
"sync"
)
// A set of pm names to create the initial pm config. This is used only for testing in this simulated adapter
var pmNames = []string{
"tx_64_pkts",
"tx_65_127_pkts",
"tx_128_255_pkts",
"tx_256_511_pkts",
"tx_512_1023_pkts",
"tx_1024_1518_pkts",
"tx_1519_9k_pkts",
"rx_64_pkts",
"rx_65_127_pkts",
"rx_128_255_pkts",
"rx_256_511_pkts",
"rx_512_1023_pkts",
"rx_1024_1518_pkts",
"rx_1519_9k_pkts",
}
//DeviceHandler follows the same patterns as ponsim_olt. The only difference is that it does not
// interact with an OLT device.
type DeviceHandler struct {
deviceId string
deviceType string
device *voltha.Device
coreProxy *com.CoreProxy
simulatedOLT *SimulatedOLT
nniPort *voltha.Port
ponPort *voltha.Port
exitChannel chan int
lockDevice sync.RWMutex
metrics *com.PmMetrics
}
//NewDeviceHandler creates a new device handler
func NewDeviceHandler(cp *com.CoreProxy, device *voltha.Device, adapter *SimulatedOLT) *DeviceHandler {
var dh DeviceHandler
dh.coreProxy = cp
cloned := (proto.Clone(device)).(*voltha.Device)
dh.deviceId = cloned.Id
dh.deviceType = cloned.Type
dh.device = cloned
dh.simulatedOLT = adapter
dh.exitChannel = make(chan int, 1)
dh.lockDevice = sync.RWMutex{}
// Set up PON metrics
dh.metrics = com.NewPmMetrics(
cloned.Id,
com.Frequency(150),
com.Grouped(false),
com.FrequencyOverride(false),
com.Metrics(pmNames),
)
return &dh
}
// start save the device to the data model
func (dh *DeviceHandler) start(ctx context.Context) {
dh.lockDevice.Lock()
defer dh.lockDevice.Unlock()
log.Debugw("starting-device-agent", log.Fields{"device": dh.device})
// Add the initial device to the local model
log.Debug("device-agent-started")
}
// stop stops the device dh. Not much to do for now
func (dh *DeviceHandler) stop(ctx context.Context) {
dh.lockDevice.Lock()
defer dh.lockDevice.Unlock()
log.Debug("stopping-device-agent")
dh.exitChannel <- 1
log.Debug("device-agent-stopped")
}
func macAddressToUint32Array(mac string) []uint32 {
slist := strings.Split(mac, ":")
result := make([]uint32, len(slist))
var err error
var tmp int64
for index, val := range slist {
if tmp, err = strconv.ParseInt(val, 16, 32); err != nil {
return []uint32{1, 2, 3, 4, 5, 6}
}
result[index] = uint32(tmp)
}
return result
}
func (dh *DeviceHandler) AdoptDevice(device *voltha.Device) {
log.Debugw("AdoptDevice", log.Fields{"deviceId": device.Id})
// Update the device info
cloned := proto.Clone(device).(*voltha.Device)
cloned.Root = true
cloned.Vendor = "simulators"
cloned.Model = "go-simulators"
cloned.SerialNumber = com.GetRandomSerialNumber()
cloned.MacAddress = strings.ToUpper(com.GetRandomMacAddress())
// Synchronous call to update device - this method is run in its own go routine
if err := dh.coreProxy.DeviceUpdate(nil, cloned); err != nil {
log.Errorw("error-updating-device", log.Fields{"deviceId": device.Id, "error": err})
}
// Now, set the initial PM configuration for that device
if err := dh.coreProxy.DevicePMConfigUpdate(nil, dh.metrics.ToPmConfigs()); err != nil {
log.Errorw("error-updating-PMs", log.Fields{"deviceId": device.Id, "error": err})
}
// Now create the NNI Port
dh.nniPort = &voltha.Port{
PortNo: 2,
Label: fmt.Sprintf("nni-%d", 2),
Type: voltha.Port_ETHERNET_NNI,
OperStatus: voltha.OperStatus_ACTIVE,
}
// Synchronous call to update device - this method is run in its own go routine
if err := dh.coreProxy.PortCreated(nil, cloned.Id, dh.nniPort); err != nil {
log.Errorw("error-creating-nni-port", log.Fields{"deviceId": device.Id, "error": err})
}
// Now create the PON Port
dh.ponPort = &voltha.Port{
PortNo: 1,
Label: fmt.Sprintf("pon-%d", 1),
Type: voltha.Port_PON_OLT,
OperStatus: voltha.OperStatus_ACTIVE,
}
// Synchronous call to update device - this method is run in its own go routine
if err := dh.coreProxy.PortCreated(nil, cloned.Id, dh.ponPort); err != nil {
log.Errorw("error-creating-nni-port", log.Fields{"deviceId": device.Id, "error": err})
}
cloned.ConnectStatus = voltha.ConnectStatus_REACHABLE
cloned.OperStatus = voltha.OperStatus_ACTIVE
dh.device = cloned
//dh.device.SerialNumber = cloned.SerialNumber
// Update the device state
if err := dh.coreProxy.DeviceStateUpdate(nil, cloned.Id, cloned.ConnectStatus, cloned.OperStatus); err != nil {
log.Errorw("error-creating-nni-port", log.Fields{"deviceId": device.Id, "error": err})
}
// Register Child device
initialUniPortNo := 100
log.Debugw("registering-onus", log.Fields{"total": dh.simulatedOLT.numOnus})
for i := 0; i < dh.simulatedOLT.numOnus; i++ {
go dh.coreProxy.ChildDeviceDetected(
nil,
cloned.Id,
1,
"simulated_onu",
initialUniPortNo+i,
"simulated_onu",
com.GetRandomSerialNumber(),
int64(i))
}
}
func (dh *DeviceHandler) GetOfpDeviceInfo(device *voltha.Device) (*ic.SwitchCapability, error) {
return &ic.SwitchCapability{
Desc: &of.OfpDesc{
HwDesc: "simulated_pon",
SwDesc: "simulated_pon",
SerialNum: dh.device.SerialNumber,
},
SwitchFeatures: &of.OfpSwitchFeatures{
NBuffers: 256,
NTables: 2,
Capabilities: uint32(of.OfpCapabilities_OFPC_FLOW_STATS |
of.OfpCapabilities_OFPC_TABLE_STATS |
of.OfpCapabilities_OFPC_PORT_STATS |
of.OfpCapabilities_OFPC_GROUP_STATS),
},
}, nil
}
func (dh *DeviceHandler) GetOfpPortInfo(device *voltha.Device, portNo int64) (*ic.PortCapability, error) {
cap := uint32(of.OfpPortFeatures_OFPPF_1GB_FD | of.OfpPortFeatures_OFPPF_FIBER)
return &ic.PortCapability{
Port: &voltha.LogicalPort{
OfpPort: &of.OfpPort{
HwAddr: macAddressToUint32Array(dh.device.MacAddress),
Config: 0,
State: uint32(of.OfpPortState_OFPPS_LIVE),
Curr: cap,
Advertised: cap,
Peer: cap,
CurrSpeed: uint32(of.OfpPortFeatures_OFPPF_1GB_FD),
MaxSpeed: uint32(of.OfpPortFeatures_OFPPF_1GB_FD),
},
DeviceId: dh.device.Id,
DevicePortNo: uint32(portNo),
},
}, nil
}
func (dh *DeviceHandler) Process_inter_adapter_message(msg *ic.InterAdapterMessage) error {
log.Debugw("Process_inter_adapter_message", log.Fields{"msgId": msg.Header.Id})
return nil
}
func (dh *DeviceHandler) DisableDevice(device *voltha.Device) {
cloned := proto.Clone(device).(*voltha.Device)
// Update the all ports state on that device to disable
if err := dh.coreProxy.PortsStateUpdate(nil, cloned.Id, voltha.OperStatus_UNKNOWN); err != nil {
log.Errorw("updating-ports-failed", log.Fields{"deviceId": device.Id, "error": err})
return
}
//Update the device state
cloned.ConnectStatus = voltha.ConnectStatus_UNREACHABLE
cloned.OperStatus = voltha.OperStatus_UNKNOWN
dh.device = cloned
if err := dh.coreProxy.DeviceStateUpdate(nil, cloned.Id, cloned.ConnectStatus, cloned.OperStatus); err != nil {
log.Errorw("device-state-update-failed", log.Fields{"deviceId": device.Id, "error": err})
return
}
// Tell the Core that all child devices have been disabled (by default it's an action already taken by the Core
if err := dh.coreProxy.ChildDevicesLost(nil, cloned.Id); err != nil {
log.Errorw("lost-notif-of-child-devices-failed", log.Fields{"deviceId": device.Id, "error": err})
return
}
log.Debugw("DisableDevice-end", log.Fields{"deviceId": device.Id})
}
func (dh *DeviceHandler) ReEnableDevice(device *voltha.Device) {
cloned := proto.Clone(device).(*voltha.Device)
// Update the all ports state on that device to enable
if err := dh.coreProxy.PortsStateUpdate(nil, cloned.Id, voltha.OperStatus_ACTIVE); err != nil {
log.Errorw("updating-ports-failed", log.Fields{"deviceId": device.Id, "error": err})
return
}
//Update the device state
cloned.ConnectStatus = voltha.ConnectStatus_REACHABLE
cloned.OperStatus = voltha.OperStatus_ACTIVE
dh.device = cloned
if err := dh.coreProxy.DeviceStateUpdate(nil, cloned.Id, cloned.ConnectStatus, cloned.OperStatus); err != nil {
log.Errorw("device-state-update-failed", log.Fields{"deviceId": device.Id, "error": err})
return
}
// Tell the Core that all child devices have been enabled
if err := dh.coreProxy.ChildDevicesDetected(nil, cloned.Id); err != nil {
log.Errorw("detection-notif-of-child-devices-failed", log.Fields{"deviceId": device.Id, "error": err})
return
}
log.Debugw("ReEnableDevice-end", log.Fields{"deviceId": device.Id})
}
func (dh *DeviceHandler) DeleteDevice(device *voltha.Device) {
cloned := proto.Clone(device).(*voltha.Device)
// Update the all ports state on that device to disable
if err := dh.coreProxy.DeleteAllPorts(nil, cloned.Id); err != nil {
log.Errorw("delete-ports-failed", log.Fields{"deviceId": device.Id, "error": err})
return
}
log.Debugw("DeleteDevice-end", log.Fields{"deviceId": device.Id})
}
func (dh *DeviceHandler) UpdateFlowsBulk(device *voltha.Device, flows *voltha.Flows, groups *voltha.FlowGroups, metadata *voltha.FlowMetadata) {
log.Debugw("UpdateFlowsBulk", log.Fields{"deviceId": device.Id, "flows": flows, "groups": groups})
// For now we do nothing with it
return
}
func (dh *DeviceHandler) UpdateFlowsIncremental(device *voltha.Device, flowChanges *of.FlowChanges, groupChanges *of.FlowGroupChanges, metadata *voltha.FlowMetadata) {
log.Debugw("UpdateFlowsIncremental", log.Fields{"deviceId": device.Id, "flowChanges": flowChanges, "groupChanges": groupChanges})
// For now we do nothing with it
return
}
func (dh *DeviceHandler) UpdatePmConfigs(device *voltha.Device, pmConfigs *voltha.PmConfigs) {
log.Debugw("UpdatePmConfigs", log.Fields{"deviceId": device.Id, "pmConfigs": pmConfigs})
// For now we do nothing with it
return
}
func (dh *DeviceHandler) ReconcileDevice(device *voltha.Device) {
// Update the device info
cloned := proto.Clone(device).(*voltha.Device)
cloned.ConnectStatus = voltha.ConnectStatus_REACHABLE
cloned.OperStatus = voltha.OperStatus_ACTIVE
dh.device = cloned
// Update the device state
if err := dh.coreProxy.DeviceStateUpdate(nil, cloned.Id, cloned.ConnectStatus, cloned.OperStatus); err != nil {
log.Errorw("error-creating-nni-port", log.Fields{"deviceId": device.Id, "error": err})
}
// Since we don't know how long we were down, let's reconcile the child devices
go dh.coreProxy.ReconcileChildDevices(nil, cloned.Id)
}