| { |
| "servers": [ |
| { |
| "name": "grpc_command", |
| "port": 5000, |
| "address":"", |
| "type": "grpc", |
| "routers": [ |
| { |
| "_TODO":"Suport a router list, remove the package and service from the router", |
| "package":"voltha", |
| "service":"VolthaService", |
| "router":"vcore" |
| } |
| ] |
| } |
| ], |
| "routers": [ |
| { |
| "name":"vcore", |
| "package": "voltha", |
| "service": "VolthaService", |
| "routes": [ |
| { |
| "name":"dev_manager", |
| "proto_descriptor":"voltha.pb", |
| "type":"rpc_affinity_message", |
| "association":"round_robin", |
| "routing_field": "id", |
| "backend_cluster":"vcore", |
| "_COMMENT":"Methods are naturally southbound affinity binding unless otherwise specified below", |
| "methods":[ "CreateDevice", |
| "GetCoreInstance", |
| "EnableLogicalDevicePort", |
| "DisableLogicalDevicePort", |
| "EnableDevice", |
| "DisableDevice", |
| "RebootDevice", |
| "DeleteDevice", |
| "DownloadImage", |
| "CancelImageDownload", |
| "ActivateImageUpdate", |
| "RevertImageUpdate", |
| "UpdateDevicePmConfigs", |
| "CreateAlarmFilter", |
| "UpdateAlarmFilter", |
| "DeleteAlarmFilter", |
| "SelfTest"], |
| "_COMMENT":"If a method is northbound affinity binding then association is used to route", |
| "_COMMENT":"but affinity is not set southbound but only based on the response", |
| "_COMMENT":"Methods here MUST be specified above, this overrides thier default beahvior", |
| "nb_binding_methods":["CreateDevice"], |
| "_TODO":"Overrides not implemented yet, config ignored", |
| "overrides": [ |
| {"methods":["abc","def"], "routing_field":"id"}, |
| {"methods":["ghi","jkl"]}, |
| {"method":"mno", "routing_field":"id"}, |
| {"method":"pqr"} |
| ] |
| }, |
| { |
| "name":"read_only", |
| "type":"round_robin", |
| "association":"round_robin", |
| "backend_cluster":"vcore", |
| "methods":[ "ListDevicePorts", |
| "ListDevicePmConfigs", |
| "GetImages", |
| "GetImageDownloadStatus", |
| "GetImageDownload", |
| "ListImageDownloads", |
| "ListDeviceFlows", |
| "ListDeviceFlowGroups", |
| "ListLogicalDeviceFlows", |
| "ListLogicalDeviceFlowGroups", |
| "ListDevices", |
| "GetDevice", |
| "GetDeviceType", |
| "GetDeviceGroup", |
| "GetLogicalDevice", |
| "GetAlarmFilter", |
| "ListLogicalDevicePorts", |
| "GetLogicalDevicePort" |
| ] |
| }, |
| { |
| "name":"dev_manager_ofagent", |
| "type":"binding", |
| "_association":"round_robin", |
| "binding": { |
| "type":"header", |
| "field":"voltha_backend_name", |
| "method":"Subscribe", |
| "association":"round_robin" |
| }, |
| "backend_cluster":"vcore", |
| "methods":["StreamPacketsOut", |
| "Subscribe", |
| "ListLogicalDevices", |
| "ListDeviceFlowGroups", |
| "ListLogicalDeviceFlowGroups", |
| "ListDeviceFlows", |
| "UpdateLogicalDeviceFlowTable", |
| "UpdateLogicalDeviceFlowGroupTable", |
| "ListLogicalDeviceFlows" |
| ], |
| "_TODO":"Overrides not implemented yet, config ignored", |
| "overrides": [ |
| {"methods":["abc","def"], "routing_field":"id"}, |
| {"methods":["ghi","jkl"]}, |
| {"method":"mno", "routing_field":"id"}, |
| {"method":"pqr"} |
| ] |
| } |
| ] |
| } |
| ], |
| "backend_clusters": [ |
| { |
| "name":"vcore", |
| "backends":[ { |
| "name":"vcore1", |
| "type":"active_active", |
| "association": { |
| "strategy":"serial_number", |
| "location":"header", |
| "_TODO":"The key below needs to be implemented, currently hard coded", |
| "key":"voltha_serial_number" |
| }, |
| "connections": [ { |
| "name":"vcore11", |
| "addr":"127.0.0.1", |
| "port":"5011" |
| }, |
| { |
| "name":"vcore12", |
| "addr":"127.0.0.1", |
| "port":"5012" |
| }] |
| }, |
| { |
| "name":"vcore2", |
| "type":"active_active", |
| "association": { |
| "strategy":"serial_number", |
| "location":"header" |
| }, |
| "connections": [ { |
| "name":"vcore21", |
| "addr":"127.0.0.1", |
| "port":"5021" |
| }, |
| { |
| "name":"vcore22", |
| "addr":"127.0.0.1", |
| "port":"5022" |
| }] |
| }, |
| { |
| "name":"vcore3", |
| "type":"active_active", |
| "association": { |
| "strategy":"serial_number", |
| "location":"header" |
| }, |
| "connections": [ { |
| "name":"vcore31", |
| "addr":"127.0.0.1", |
| "port":"5031" |
| }, |
| { |
| "name":"vcore32", |
| "addr":"127.0.0.1", |
| "port":"5032" |
| }] |
| }] |
| } |
| ], |
| "api": { |
| "_comment":"If this isn't defined then no api is available for dynamic configuration and queries", |
| "address":"", |
| "port":55554 |
| } |
| } |