python/Makefile - voltha-go - Gitiles

 #
 # Copyright 2018 the original author or authors.
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at
 #
 #      http://www.apache.org/licenses/LICENSE-2.0
 #
 # Unless required by applicable law or agreed to in writing, software
 # distributed under the License is distributed on an "AS IS" BASIS,
 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 # See the License for the specific language governing permissions and
 # limitations under the License.
 #

 ifneq ($(VOLTHA_BUILD),docker)
 ifeq ($(VOLTHA_BASE)_set,_set)
 $(error To get started, please source the env.sh file)
 endif
 endif

 ifeq ($(TAG),)
 TAG := latest
 endif

 ifeq ($(TARGET_TAG),)
 TARGET_TAG := latest
 endif

 # If no DOCKER_HOST_IP is specified grab a v4 IP address associated with
 # the default gateway
 ifeq ($(DOCKER_HOST_IP),)
 DOCKER_HOST_IP := $(shell ifconfig $$(netstat -rn | grep -E '^(default|0.0.0.0)' | head -1 | awk '{print $$NF}') | grep inet | awk '{print $$2}' | sed -e 's/addr://g')
 endif

 ifneq ($(http_proxy)$(https_proxy),)
 # Include proxies from the environment
 DOCKER_PROXY_ARGS = \
        --build-arg http_proxy=$(http_proxy) \
        --build-arg https_proxy=$(https_proxy) \
        --build-arg ftp_proxy=$(ftp_proxy) \
        --build-arg no_proxy=$(no_proxy) \
        --build-arg HTTP_PROXY=$(HTTP_PROXY) \
        --build-arg HTTPS_PROXY=$(HTTPS_PROXY) \
        --build-arg FTP_PROXY=$(FTP_PROXY) \
        --build-arg NO_PROXY=$(NO_PROXY)
 endif

 DOCKER_BUILD_ARGS = \
 	--build-arg TAG=$(TAG) \
 	--build-arg REGISTRY=$(REGISTRY) \
 	--build-arg REPOSITORY=$(REPOSITORY) \
 	$(DOCKER_PROXY_ARGS) $(DOCKER_CACHE_ARG) \
 	 --rm --force-rm \
 	$(DOCKER_BUILD_EXTRA_ARGS)

 VENVDIR := venv-$(shell uname -s | tr '[:upper:]' '[:lower:]')

 DOCKER_IMAGE_LIST = \
 	base \
 	protoc \
 	protos \
 	adapter-ponsim-olt \
 	adapter-ponsim-onu

 # The following list was scavanged from the compose / stack files as well as
 # from the Dockerfiles. If nothing else it highlights that VOLTHA is not
 # using consistent versions for some of the containers.

 FETCH_BUILD_IMAGE_LIST = \
        alpine:3.6 \
        centos:7 \
        centurylink/ca-certs:latest \
        grpc/python:latest \
        ubuntu:xenial

 FETCH_COMPOSE_IMAGE_LIST = \
         wurstmeister/kafka:latest \
         wurstmeister/zookeeper:latest

 # find k8s -type f | xargs grep image: | awk '{print $NF}' | sed -e 's/\"//g' | sed '/:.*$/!s/$/:latest/g' | sort -u | sed -e 's/^/       /g' -e 's/$/ \\/g'
 # Manually remove some image from this list as they don't reflect the new
 # naming conventions for the VOLTHA build
 FETCH_K8S_IMAGE_LIST = \
        wurstmeister/kafka:1.0.0 \
        zookeeper:3.4.11

 FETCH_IMAGE_LIST = $(shell echo $(FETCH_BUILD_IMAGE_LIST) $(FETCH_COMPOSE_IMAGE_LIST) $(FETCH_K8S_IMAGE_LIST) | tr ' ' '\n' | sort -u)

 .PHONY: $(DIRS) $(DIRS_CLEAN) $(DIRS_FLAKE8) flake8 base ponsim_olt ponsim_onu protos cli ofagent kafka common start stop tag push pull

 # This should to be the first and default target in this Makefile
 help:
 	@echo "Usage: make [<target>]"
 	@echo "where available targets are:"
 	@echo
 	@echo "build        : Build the Adapters protos and docker images.\n\
                If this is the first time you are building, choose \"make build\" option."
 	@echo "clean        : Remove files created by the build and tests"
 	@echo "distclean    : Remove venv directory"
 	@echo "fetch        : Pre-fetch artifacts for subsequent local builds"
 	@echo "help         : Print this help"
 	@echo "protoc       : Build a container with protoc installed"
 	@echo "protos       : Compile all grpc/protobuf files"
 	@echo "rebuild-venv : Rebuild local Python virtualenv from scratch"
 	@echo "venv         : Build local Python virtualenv if did not exist yet"
 	@echo "containers   : Build all the docker containers"
 	@echo "base         : Build the base docker container used by all other dockers"
 	@echo "adapter_ponsim_olt       : Build the ponsim olt adapter docker container"
 	@echo "adapter_ponsim_onu       : Build the ponsim olt adapter docker container"
 	@echo "ofagent      : Build the openflow agent docker container"
 	@echo "tag          : Tag a set of images"
 	@echo "push         : Push the docker images to an external repository"
 	@echo "pull         : Pull the docker images from a repository"
 	@echo

 ## New directories can be added here
 #DIRS:=

 ## If one directory depends on another directory that
 ## dependency can be expressed here
 ##
 ## For example, if the Tibit directory depended on the eoam
 ## directory being built first, then that can be expressed here.
 ##  driver/tibit: eoam

 # Parallel Build
 $(DIRS):
 	@echo "    MK $@"
 	$(Q)$(MAKE) -C $@

 # Parallel Clean
 DIRS_CLEAN = $(addsuffix .clean,$(DIRS))
 $(DIRS_CLEAN):
 	@echo "    CLEAN $(basename $@)"
 	$(Q)$(MAKE) -C $(basename $@) clean

 # Parallel Flake8
 DIRS_FLAKE8 = $(addsuffix .flake8,$(DIRS))
 $(DIRS_FLAKE8):
 	@echo "    FLAKE8 $(basename $@)"
 	-$(Q)$(MAKE) -C $(basename $@) flake8

 build: protoc protos containers

 containers: base adapter_ponsim_olt adapter_ponsim_onu ofagent cli

 base:
 	docker build $(DOCKER_BUILD_ARGS) -t ${REGISTRY}${REPOSITORY}voltha-base:${TAG} -f docker/Dockerfile.base .

 adapter_ponsim_olt:
 	docker build $(DOCKER_BUILD_ARGS) -t ${REGISTRY}${REPOSITORY}voltha-adapter-ponsim-olt:${TAG} -f docker/Dockerfile.adapter_ponsim_olt .

 adapter_ponsim_onu:
 	docker build $(DOCKER_BUILD_ARGS) -t ${REGISTRY}${REPOSITORY}voltha-adapter-ponsim-onu:${TAG} -f docker/Dockerfile.adapter_ponsim_onu .

 ofagent:
 	docker build $(DOCKER_BUILD_ARGS) -t ${REGISTRY}${REPOSITORY}voltha-ofagent:${TAG} -f docker/Dockerfile.ofagent .

 cli:
 	docker build $(DOCKER_BUILD_ARGS) -t ${REGISTRY}${REPOSITORY}voltha-cli:${TAG} -f docker/Dockerfile.cli .

 tag: $(patsubst  %,%.tag,$(DOCKER_IMAGE_LIST))

 push: tag $(patsubst  %,%.push,$(DOCKER_IMAGE_LIST))

 pull: $(patsubst  %,%.pull,$(DOCKER_IMAGE_LIST))

 %.tag:
 	docker tag ${REGISTRY}${REPOSITORY}voltha-$(subst .tag,,$@):${TAG} ${TARGET_REGISTRY}${TARGET_REPOSITORY}voltha-$(subst .tag,,$@):${TARGET_TAG}

 %.push:
 	docker push ${TARGET_REGISTRY}${TARGET_REPOSITORY}voltha-$(subst .push,,$@):${TARGET_TAG}

 %.pull:
 	docker pull ${REGISTRY}${REPOSITORY}voltha-$(subst .pull,,$@):${TAG}

 protoc:
 ifeq ($(VOLTHA_BUILD),docker)
 	docker build $(DOCKER_BUILD_ARGS) -t ${REGISTRY}${REPOSITORY}voltha-protoc:${TAG} -f docker/Dockerfile.protoc .
 endif

 protos:
 ifneq ($(VOLTHA_BUILD),docker)
 	make -C protos
 else
 	#cp ../protos/*.proto ./protos
 	docker build $(DOCKER_BUILD_ARGS) -t ${REGISTRY}${REPOSITORY}voltha-protos:${TAG} -f docker/Dockerfile.protos .
 endif

 install-protoc:
 	make -C voltha/protos install-protoc

 clean:
 	find . -name '*.pyc' | xargs rm -f
 	rm -f ./protos/*_pb2.py
 	rm -f ./protos/*_pb2_grpc.py
 	rm -f ./protos/*.desc
 	rm -f ./protos/*.proto

 distclean: clean
 	rm -rf ${VENVDIR}

 fetch:
 	@bash -c ' \
 		for i in $(FETCH_IMAGE_LIST); do \
 			docker pull $$i; \
 		done'

 purge-venv:
 	rm -fr ${VENVDIR}

 rebuild-venv: purge-venv venv

 ifneq ($(VOLTHA_BUILD),docker)
 venv: ${VENVDIR}/.built
 else
 venv:
 endif

 ${VENVDIR}/.built:
 	@ virtualenv ${VENVDIR}
 	@ . ${VENVDIR}/bin/activate && \
 	    pip install --upgrade pip; \
 	    if ! pip install -r requirements.txt; \
 	    then \
 	        echo "On MAC OS X, if the installation failed with an error \n'<openssl/opensslv.h>': file not found,"; \
 	        echo "see the BUILD.md file for a workaround"; \
 	    else \
 	        uname -s > ${VENVDIR}/.built; \
 	    fi


 flake8: $(DIRS_FLAKE8)

 # end file
	#
	# Copyright 2018 the original author or authors.
	#
	# Licensed under the Apache License, Version 2.0 (the "License");
	# you may not use this file except in compliance with the License.
	# You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.
	#

	ifneq ($(VOLTHA_BUILD),docker)
	ifeq ($(VOLTHA_BASE)_set,_set)
	$(error To get started, please source the env.sh file)
	endif
	endif

	ifeq ($(TAG),)
	TAG := latest
	endif

	ifeq ($(TARGET_TAG),)
	TARGET_TAG := latest
	endif

	# If no DOCKER_HOST_IP is specified grab a v4 IP address associated with
	# the default gateway
	ifeq ($(DOCKER_HOST_IP),)
	DOCKER_HOST_IP := $(shell ifconfig $$(netstat -rn \| grep -E '^(default\|0.0.0.0)' \| head -1 \| awk '{print $$NF}') \| grep inet \| awk '{print $$2}' \| sed -e 's/addr://g')
	endif

	ifneq ($(http_proxy)$(https_proxy),)
	# Include proxies from the environment
	DOCKER_PROXY_ARGS = \
	--build-arg http_proxy=$(http_proxy) \
	--build-arg https_proxy=$(https_proxy) \
	--build-arg ftp_proxy=$(ftp_proxy) \
	--build-arg no_proxy=$(no_proxy) \
	--build-arg HTTP_PROXY=$(HTTP_PROXY) \
	--build-arg HTTPS_PROXY=$(HTTPS_PROXY) \
	--build-arg FTP_PROXY=$(FTP_PROXY) \
	--build-arg NO_PROXY=$(NO_PROXY)
	endif

	DOCKER_BUILD_ARGS = \
	--build-arg TAG=$(TAG) \
	--build-arg REGISTRY=$(REGISTRY) \
	--build-arg REPOSITORY=$(REPOSITORY) \
	$(DOCKER_PROXY_ARGS) $(DOCKER_CACHE_ARG) \
	--rm --force-rm \
	$(DOCKER_BUILD_EXTRA_ARGS)

	VENVDIR := venv-$(shell uname -s \| tr '[:upper:]' '[:lower:]')

	DOCKER_IMAGE_LIST = \
	base \
	protoc \
	protos \
	adapter-ponsim-olt \
	adapter-ponsim-onu

	# The following list was scavanged from the compose / stack files as well as
	# from the Dockerfiles. If nothing else it highlights that VOLTHA is not
	# using consistent versions for some of the containers.

	FETCH_BUILD_IMAGE_LIST = \
	alpine:3.6 \
	centos:7 \
	centurylink/ca-certs:latest \
	grpc/python:latest \
	ubuntu:xenial

	FETCH_COMPOSE_IMAGE_LIST = \
	wurstmeister/kafka:latest \
	wurstmeister/zookeeper:latest

	# find k8s -type f \| xargs grep image: \| awk '{print $NF}' \| sed -e 's/\"//g' \| sed '/:.*$/!s/$/:latest/g' \| sort -u \| sed -e 's/^/ /g' -e 's/$/ \\/g'
	# Manually remove some image from this list as they don't reflect the new
	# naming conventions for the VOLTHA build
	FETCH_K8S_IMAGE_LIST = \
	wurstmeister/kafka:1.0.0 \
	zookeeper:3.4.11

	FETCH_IMAGE_LIST = $(shell echo $(FETCH_BUILD_IMAGE_LIST) $(FETCH_COMPOSE_IMAGE_LIST) $(FETCH_K8S_IMAGE_LIST) \| tr ' ' '\n' \| sort -u)

	.PHONY: $(DIRS) $(DIRS_CLEAN) $(DIRS_FLAKE8) flake8 base ponsim_olt ponsim_onu protos cli ofagent kafka common start stop tag push pull

	# This should to be the first and default target in this Makefile
	help:
	@echo "Usage: make [<target>]"
	@echo "where available targets are:"
	@echo
	@echo "build : Build the Adapters protos and docker images.\n\
	If this is the first time you are building, choose \"make build\" option."
	@echo "clean : Remove files created by the build and tests"
	@echo "distclean : Remove venv directory"
	@echo "fetch : Pre-fetch artifacts for subsequent local builds"
	@echo "help : Print this help"
	@echo "protoc : Build a container with protoc installed"
	@echo "protos : Compile all grpc/protobuf files"
	@echo "rebuild-venv : Rebuild local Python virtualenv from scratch"
	@echo "venv : Build local Python virtualenv if did not exist yet"
	@echo "containers : Build all the docker containers"
	@echo "base : Build the base docker container used by all other dockers"
	@echo "adapter_ponsim_olt : Build the ponsim olt adapter docker container"
	@echo "adapter_ponsim_onu : Build the ponsim olt adapter docker container"
	@echo "ofagent : Build the openflow agent docker container"
	@echo "tag : Tag a set of images"
	@echo "push : Push the docker images to an external repository"
	@echo "pull : Pull the docker images from a repository"
	@echo

	## New directories can be added here
	#DIRS:=

	## If one directory depends on another directory that
	## dependency can be expressed here
	##
	## For example, if the Tibit directory depended on the eoam
	## directory being built first, then that can be expressed here.
	## driver/tibit: eoam

	# Parallel Build
	$(DIRS):
	@echo " MK $@"
	$(Q)$(MAKE) -C $@

	# Parallel Clean
	DIRS_CLEAN = $(addsuffix .clean,$(DIRS))
	$(DIRS_CLEAN):
	@echo " CLEAN $(basename $@)"
	$(Q)$(MAKE) -C $(basename $@) clean

	# Parallel Flake8
	DIRS_FLAKE8 = $(addsuffix .flake8,$(DIRS))
	$(DIRS_FLAKE8):
	@echo " FLAKE8 $(basename $@)"
	-$(Q)$(MAKE) -C $(basename $@) flake8

	build: protoc protos containers

	containers: base adapter_ponsim_olt adapter_ponsim_onu ofagent cli

	base:
	docker build $(DOCKER_BUILD_ARGS) -t ${REGISTRY}${REPOSITORY}voltha-base:${TAG} -f docker/Dockerfile.base .

	adapter_ponsim_olt:
	docker build $(DOCKER_BUILD_ARGS) -t ${REGISTRY}${REPOSITORY}voltha-adapter-ponsim-olt:${TAG} -f docker/Dockerfile.adapter_ponsim_olt .

	adapter_ponsim_onu:
	docker build $(DOCKER_BUILD_ARGS) -t ${REGISTRY}${REPOSITORY}voltha-adapter-ponsim-onu:${TAG} -f docker/Dockerfile.adapter_ponsim_onu .

	ofagent:
	docker build $(DOCKER_BUILD_ARGS) -t ${REGISTRY}${REPOSITORY}voltha-ofagent:${TAG} -f docker/Dockerfile.ofagent .

	cli:
	docker build $(DOCKER_BUILD_ARGS) -t ${REGISTRY}${REPOSITORY}voltha-cli:${TAG} -f docker/Dockerfile.cli .

	tag: $(patsubst %,%.tag,$(DOCKER_IMAGE_LIST))

	push: tag $(patsubst %,%.push,$(DOCKER_IMAGE_LIST))

	pull: $(patsubst %,%.pull,$(DOCKER_IMAGE_LIST))

	%.tag:
	docker tag ${REGISTRY}${REPOSITORY}voltha-$(subst .tag,,$@):${TAG} ${TARGET_REGISTRY}${TARGET_REPOSITORY}voltha-$(subst .tag,,$@):${TARGET_TAG}

	%.push:
	docker push ${TARGET_REGISTRY}${TARGET_REPOSITORY}voltha-$(subst .push,,$@):${TARGET_TAG}

	%.pull:
	docker pull ${REGISTRY}${REPOSITORY}voltha-$(subst .pull,,$@):${TAG}

	protoc:
	ifeq ($(VOLTHA_BUILD),docker)
	docker build $(DOCKER_BUILD_ARGS) -t ${REGISTRY}${REPOSITORY}voltha-protoc:${TAG} -f docker/Dockerfile.protoc .
	endif

	protos:
	ifneq ($(VOLTHA_BUILD),docker)
	make -C protos
	else
	#cp ../protos/*.proto ./protos
	docker build $(DOCKER_BUILD_ARGS) -t ${REGISTRY}${REPOSITORY}voltha-protos:${TAG} -f docker/Dockerfile.protos .
	endif

	install-protoc:
	make -C voltha/protos install-protoc

	clean:
	find . -name '*.pyc' \| xargs rm -f
	rm -f ./protos/*_pb2.py
	rm -f ./protos/*_pb2_grpc.py
	rm -f ./protos/*.desc
	rm -f ./protos/*.proto

	distclean: clean
	rm -rf ${VENVDIR}

	fetch:
	@bash -c ' \
	for i in $(FETCH_IMAGE_LIST); do \
	docker pull $$i; \
	done'

	purge-venv:
	rm -fr ${VENVDIR}

	rebuild-venv: purge-venv venv

	ifneq ($(VOLTHA_BUILD),docker)
	venv: ${VENVDIR}/.built
	else
	venv:
	endif

	${VENVDIR}/.built:
	@ virtualenv ${VENVDIR}
	@ . ${VENVDIR}/bin/activate && \
	pip install --upgrade pip; \
	if ! pip install -r requirements.txt; \
	then \
	echo "On MAC OS X, if the installation failed with an error \n'<openssl/opensslv.h>': file not found,"; \
	echo "see the BUILD.md file for a workaround"; \
	else \
	uname -s > ${VENVDIR}/.built; \
	fi


	flake8: $(DIRS_FLAKE8)

	# end file