adaptercore/statsmanager.go - voltha-openolt-adapter - Gitiles

 /*
  * Copyright 2019-present Open Networking Foundation

  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at

  * http://www.apache.org/licenses/LICENSE-2.0

  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */

 //Package adaptercore provides the utility for olt devices, flows and statistics
 package adaptercore

 import (
 	"fmt"
 	"github.com/opencord/voltha-lib-go/v3/pkg/log"
 	"github.com/opencord/voltha-protos/v3/go/openolt"
 	"github.com/opencord/voltha-protos/v3/go/voltha"
 	"sync"
 	"time"
 )

 var mutex = &sync.Mutex{}

 // PonPort representation
 type PonPort struct {
 	/*
 	   This is a highly reduced version taken from the adtran pon_port.
 	   TODO: Extend for use in the openolt adapter set.
 	*/
 	/*    MAX_ONUS_SUPPORTED = 256
 	      DEFAULT_ENABLED = False
 	      MAX_DEPLOYMENT_RANGE = 25000  # Meters (OLT-PB maximum)

 	      _MCAST_ONU_ID = 253
 	      _MCAST_ALLOC_BASE = 0x500

 	      _SUPPORTED_ACTIVATION_METHODS = ['autodiscovery']  # , 'autoactivate']
 	      _SUPPORTED_AUTHENTICATION_METHODS = ['serial-number']
 	*/
 	PONID    uint32
 	DeviceID string
 	IntfID   uint32
 	PortNum  uint32
 	PortID   uint32
 	Label    string
 	ONUs     map[uint32]interface{}
 	ONUsByID map[uint32]interface{}

 	RxBytes        uint64
 	RxPackets      uint64
 	RxUcastPackets uint64
 	RxMcastPackets uint64
 	RxBcastPackets uint64
 	RxErrorPackets uint64
 	TxBytes        uint64
 	TxPackets      uint64
 	TxUcastPackets uint64
 	TxMcastPackets uint64
 	TxBcastPackets uint64
 	TxErrorPackets uint64
 	RxCrcErrors    uint64
 	BipErrors      uint64
 }

 // NewPONPort returns a new instance of PonPort initialized with given PONID, DeviceID, IntfID and PortNum
 func NewPONPort(PONID uint32, DeviceID string, IntfID uint32, PortNum uint32) *PonPort {

 	var PON PonPort

 	PON.PONID = PONID
 	PON.DeviceID = DeviceID
 	PON.IntfID = IntfID
 	PON.PortNum = PortNum
 	PON.PortID = 0
 	PON.Label = fmt.Sprintf("%s%d", "pon-", PONID)

 	PON.ONUs = make(map[uint32]interface{})
 	PON.ONUsByID = make(map[uint32]interface{})

 	/*
 	   Statistics  taken from nni_port
 	   self.intf_id = 0  #handled by getter
 	   self.port_no = 0  #handled by getter
 	   self.port_id = 0  #handled by getter

 	   Note:  In the current implementation of the kpis coming from the BAL the stats are the
 	   samne model for NNI and PON.

 	   TODO:   Integrate additional kpis for the PON and other southbound port objecgts.

 	*/

 	PON.RxBytes = 0
 	PON.RxPackets = 0
 	PON.RxUcastPackets = 0
 	PON.RxMcastPackets = 0
 	PON.RxBcastPackets = 0
 	PON.RxErrorPackets = 0
 	PON.TxBytes = 0
 	PON.TxPackets = 0
 	PON.TxUcastPackets = 0
 	PON.TxMcastPackets = 0
 	PON.TxBcastPackets = 0
 	PON.TxErrorPackets = 0
 	PON.RxCrcErrors = 0
 	PON.BipErrors = 0

 	/*    def __str__(self):
 	      return "PonPort-{}: Admin: {}, Oper: {}, OLT: {}".format(self._label,
 	                                                               self._admin_state,
 	                                                               self._oper_status,
 	                                                               self.olt)
 	*/
 	return &PON
 }

 // NniPort representation
 type NniPort struct {
 	/*
 	   Northbound network port, often Ethernet-based

 	   This is a highly reduced version taken from the adtran nni_port code set
 	   TODO:   add functions to allow for port specific values and operations
 	*/
 	PortNum     uint32
 	Name        string
 	LogicalPort uint32
 	IntfID      uint32

 	RxBytes        uint64
 	RxPackets      uint64
 	RxUcastPackets uint64
 	RxMcastPackets uint64
 	RxBcastPackets uint64
 	RxErrorPackets uint64
 	TxBytes        uint64
 	TxPackets      uint64
 	TxUcastPackets uint64
 	TxMcastPackets uint64
 	TxBcastPackets uint64
 	TxErrorPackets uint64
 	RxCrcErrors    uint64
 	BipErrors      uint64
 }

 // NewNniPort returns a new instance of NniPort initialized with the given PortNum and IntfID
 func NewNniPort(PortNum uint32, IntfID uint32) *NniPort {

 	var NNI NniPort

 	NNI.PortNum = PortNum
 	NNI.Name = fmt.Sprintf("%s%d", "nni-", PortNum)
 	NNI.IntfID = IntfID

 	NNI.RxBytes = 0
 	NNI.RxPackets = 0
 	NNI.RxUcastPackets = 0
 	NNI.RxMcastPackets = 0
 	NNI.RxBcastPackets = 0
 	NNI.RxErrorPackets = 0
 	NNI.TxBytes = 0
 	NNI.TxPackets = 0
 	NNI.TxUcastPackets = 0
 	NNI.TxMcastPackets = 0
 	NNI.TxBcastPackets = 0
 	NNI.TxErrorPackets = 0
 	NNI.RxCrcErrors = 0
 	NNI.BipErrors = 0

 	return &NNI
 }

 // OpenOltStatisticsMgr structure
 type OpenOltStatisticsMgr struct {
 	Device         *DeviceHandler
 	NorthBoundPort map[uint32]*NniPort
 	SouthBoundPort map[uint32]*PonPort
 	// TODO  PMMetrics Metrics
 }

 // NewOpenOltStatsMgr returns a new instance of the OpenOltStatisticsMgr
 func NewOpenOltStatsMgr(Dev *DeviceHandler) *OpenOltStatisticsMgr {

 	var StatMgr OpenOltStatisticsMgr

 	StatMgr.Device = Dev
 	// TODO call metric PMMetric =
 	// Northbound and Southbound ports
 	// added to initialize the pm_metrics
 	var Ports interface{}
 	Ports, _ = InitPorts("nni", Dev.deviceID, 1)
 	StatMgr.NorthBoundPort, _ = Ports.(map[uint32]*NniPort)
 	NumPonPorts := Dev.resourceMgr.DevInfo.GetPonPorts()
 	Ports, _ = InitPorts("pon", Dev.deviceID, NumPonPorts)
 	StatMgr.SouthBoundPort, _ = Ports.(map[uint32]*PonPort)
 	return &StatMgr
 }

 // InitPorts collects the port objects:  nni and pon that are updated with the current data from the OLT
 func InitPorts(Intftype string, DeviceID string, numOfPorts uint32) (interface{}, error) {
 	/*
 	     This method collects the port objects:  nni and pon that are updated with the
 	     current data from the OLT

 	     Both the northbound (nni) and southbound ports are indexed by the interface id (intf_id)
 	     and NOT the port number. When the port object is instantiated it will contain the intf_id and
 	     port_no values

 	   :param type:
 	   :return:
 	*/
 	var i uint32
 	if Intftype == "nni" {
 		NniPorts := make(map[uint32]*NniPort)
 		for i = 0; i < numOfPorts; i++ {
 			Port := BuildPortObject(i, "nni", DeviceID).(*NniPort)
 			NniPorts[Port.IntfID] = Port
 		}
 		return NniPorts, nil
 	} else if Intftype == "pon" {
 		PONPorts := make(map[uint32]*PonPort)
 		for i = 0; i < numOfPorts; i++ {
 			PONPort := BuildPortObject(i, "pon", DeviceID).(*PonPort)
 			PONPorts[PortNoToIntfID(PONPort.IntfID, voltha.Port_PON_OLT)] = PONPort
 		}
 		return PONPorts, nil
 	} else {
 		log.Errorf("Invalid type of interface %s", Intftype)
 		return nil, NewErrInvalidValue(log.Fields{"interface-type": Intftype}, nil)
 	}
 }

 // BuildPortObject allows for updating north and southbound ports, newly discovered ports, and devices
 func BuildPortObject(PortNum uint32, IntfType string, DeviceID string) interface{} {
 	/*
 	   Separate method to allow for updating north and southbound ports
 	   newly discovered ports and devices

 	   :param port_num:
 	   :param type:
 	   :return:
 	*/

 	//This builds a port object which is added to the
 	//appropriate northbound or southbound values
 	if IntfType == "nni" {
 		IntfID := IntfIDToPortNo(PortNum, voltha.Port_ETHERNET_NNI)
 		nniID := PortNoToIntfID(IntfID, voltha.Port_ETHERNET_NNI)
 		log.Debugf("NniID %v", nniID)
 		return NewNniPort(PortNum, nniID)
 	} else if IntfType == "pon" {
 		// PON ports require a different configuration
 		//  intf_id and pon_id are currently equal.
 		IntfID := IntfIDToPortNo(PortNum, voltha.Port_PON_OLT)
 		PONID := PortNoToIntfID(IntfID, voltha.Port_PON_OLT)
 		log.Debugf("PonID %v", PONID)
 		return NewPONPort(PONID, DeviceID, IntfID, PortNum)
 	} else {
 		log.Errorf("Invalid type of interface %s", IntfType)
 		return nil
 	}
 }

 // collectNNIMetrics will collect the nni port metrics
 func (StatMgr *OpenOltStatisticsMgr) collectNNIMetrics(nniID uint32) map[string]float32 {

 	nnival := make(map[string]float32)
 	mutex.Lock()
 	cm := StatMgr.Device.portStats.NorthBoundPort[nniID]
 	mutex.Unlock()
 	metricName := StatMgr.Device.metrics.GetSubscriberMetrics()

 	if metricName != nil && len(metricName) > 0 {
 		for mName := range metricName {
 			switch mName {
 			case "rx_bytes":
 				nnival["RxBytes"] = float32(cm.RxBytes)
 			case "rx_packets":
 				nnival["RxPackets"] = float32(cm.RxPackets)
 			case "rx_ucast_packets":
 				nnival["RxUcastPackets"] = float32(cm.RxUcastPackets)
 			case "rx_mcast_packets":
 				nnival["RxMcastPackets"] = float32(cm.RxMcastPackets)
 			case "rx_bcast_packets":
 				nnival["RxBcastPackets"] = float32(cm.RxBcastPackets)
 			case "tx_bytes":
 				nnival["TxBytes"] = float32(cm.TxBytes)
 			case "tx_packets":
 				nnival["TxPackets"] = float32(cm.TxPackets)
 			case "tx_mcast_packets":
 				nnival["TxMcastPackets"] = float32(cm.TxMcastPackets)
 			case "tx_bcast_packets":
 				nnival["TxBcastPackets"] = float32(cm.TxBcastPackets)
 			}
 		}
 	}
 	return nnival
 }

 // collectPONMetrics will collect the pon port metrics
 func (StatMgr *OpenOltStatisticsMgr) collectPONMetrics(pID uint32) map[string]float32 {

 	ponval := make(map[string]float32)
 	mutex.Lock()
 	cm := StatMgr.Device.portStats.SouthBoundPort[pID]
 	mutex.Unlock()
 	metricName := StatMgr.Device.metrics.GetSubscriberMetrics()

 	if metricName != nil && len(metricName) > 0 {
 		for mName := range metricName {
 			switch mName {
 			case "rx_bytes":
 				ponval["RxBytes"] = float32(cm.RxBytes)
 			case "rx_packets":
 				ponval["RxPackets"] = float32(cm.RxPackets)
 			// these are not supported in OpenOlt Agent now
 			// will return zero until supported
 			case "rx_ucast_packets":
 				ponval["RxUcastPackets"] = float32(cm.RxUcastPackets)
 			case "rx_mcast_packets":
 				ponval["RxMcastPackets"] = float32(cm.RxMcastPackets)
 			case "rx_bcast_packets":
 				ponval["RxBcastPackets"] = float32(cm.RxBcastPackets)
 			// End will return zero until supported
 			case "tx_bytes":
 				ponval["TxBytes"] = float32(cm.TxBytes)
 			case "tx_packets":
 				ponval["TxPackets"] = float32(cm.TxPackets)
 			// these are not supported in OpenOlt Agent now
 			// will return zero until supported
 			case "tx_ucast_packets":
 				ponval["TxUcastPackets"] = float32(cm.TxUcastPackets)
 			case "tx_mcast_packets":
 				ponval["TxMcastPackets"] = float32(cm.TxMcastPackets)
 			case "tx_bcast_packets":
 				ponval["TxBcastPackets"] = float32(cm.TxBcastPackets)
 			}
 		}
 	}
 	return ponval
 }

 // publishMatrics will publish the pon port metrics
 func (StatMgr OpenOltStatisticsMgr) publishMetrics(portType string, val map[string]float32, portnum uint32, context map[string]string, devID string) {
 	log.Debugf("Post-%v %v", portType, val)

 	var metricInfo voltha.MetricInformation
 	var ke voltha.KpiEvent2
 	var volthaEventSubCatgry voltha.EventSubCategory_Types

 	if portType == "NNIStats" {
 		volthaEventSubCatgry = voltha.EventSubCategory_NNI
 	} else {
 		volthaEventSubCatgry = voltha.EventSubCategory_PON
 	}

 	raisedTs := time.Now().UnixNano()
 	mmd := voltha.MetricMetaData{
 		Title:    portType,
 		Ts:       float64(raisedTs),
 		Context:  context,
 		DeviceId: devID,
 	}

 	metricInfo.Metadata = &mmd
 	metricInfo.Metrics = val

 	ke.SliceData = []*voltha.MetricInformation{&metricInfo}
 	ke.Type = voltha.KpiEventType_slice
 	ke.Ts = float64(time.Now().UnixNano())

 	if err := StatMgr.Device.EventProxy.SendKpiEvent("STATS_EVENT", &ke, voltha.EventCategory_EQUIPMENT, volthaEventSubCatgry, raisedTs); err != nil {
 		log.Errorw("Failed to send Pon stats", log.Fields{"err": err})
 	}

 }

 // PortStatisticsIndication handles the port statistics indication
 func (StatMgr *OpenOltStatisticsMgr) PortStatisticsIndication(PortStats *openolt.PortStatistics, NumPonPorts uint32) {
 	log.Debugf("port-stats-collected %v", PortStats)
 	StatMgr.PortsStatisticsKpis(PortStats, NumPonPorts)
 	log.Infow("Received port stats indication", log.Fields{"PortStats": PortStats})
 	// TODO send stats to core topic to the voltha kafka or a different kafka ?
 }

 // FlowStatisticsIndication to be implemented
 func FlowStatisticsIndication(self, FlowStats *openolt.FlowStatistics) {
 	log.Debugf("flow-stats-collected %v", FlowStats)
 	//TODO send to kafka ?
 }

 // PortsStatisticsKpis map the port stats values into a dictionary, creates the kpiEvent and then publish to Kafka
 func (StatMgr *OpenOltStatisticsMgr) PortsStatisticsKpis(PortStats *openolt.PortStatistics, NumPonPorts uint32) {

 	/*map the port stats values into a dictionary
 	  Create a kpoEvent and publish to Kafka

 	  :param port_stats:
 	  :return:
 	*/
 	//var err error
 	IntfID := PortStats.IntfId

 	if (IntfIDToPortNo(1, voltha.Port_ETHERNET_NNI) < IntfID) &&
 		(IntfID < IntfIDToPortNo(4, voltha.Port_ETHERNET_NNI)) {
 		/*
 		   for this release we are only interested in the first NNI for
 		   Northbound.
 		   we are not using the other 3
 		*/
 		return
 	} else if IntfIDToPortNo(0, voltha.Port_ETHERNET_NNI) == IntfID {

 		var portNNIStat NniPort
 		portNNIStat.IntfID = IntfID
 		portNNIStat.PortNum = uint32(0)
 		portNNIStat.RxBytes = PortStats.RxBytes
 		portNNIStat.RxPackets = PortStats.RxPackets
 		portNNIStat.RxUcastPackets = PortStats.RxUcastPackets
 		portNNIStat.RxMcastPackets = PortStats.RxMcastPackets
 		portNNIStat.RxBcastPackets = PortStats.RxBcastPackets
 		portNNIStat.TxBytes = PortStats.TxBytes
 		portNNIStat.TxPackets = PortStats.TxPackets
 		portNNIStat.TxUcastPackets = PortStats.TxUcastPackets
 		portNNIStat.TxMcastPackets = PortStats.TxMcastPackets
 		portNNIStat.TxBcastPackets = PortStats.TxBcastPackets
 		mutex.Lock()
 		StatMgr.NorthBoundPort[0] = &portNNIStat
 		mutex.Unlock()
 		log.Debugf("Received-NNI-Stats: %v", StatMgr.NorthBoundPort)
 	}
 	for i := uint32(0); i < NumPonPorts; i++ {

 		if IntfIDToPortNo(i, voltha.Port_PON_OLT) == IntfID {
 			var portPonStat PonPort
 			portPonStat.IntfID = IntfID
 			portPonStat.PortNum = i
 			portPonStat.PONID = i
 			portPonStat.RxBytes = PortStats.RxBytes
 			portPonStat.RxPackets = PortStats.RxPackets
 			portPonStat.RxUcastPackets = PortStats.RxUcastPackets
 			portPonStat.RxMcastPackets = PortStats.RxMcastPackets
 			portPonStat.RxBcastPackets = PortStats.RxBcastPackets
 			portPonStat.TxBytes = PortStats.TxBytes
 			portPonStat.TxPackets = PortStats.TxPackets
 			portPonStat.TxUcastPackets = PortStats.TxUcastPackets
 			portPonStat.TxMcastPackets = PortStats.TxMcastPackets
 			portPonStat.TxBcastPackets = PortStats.TxBcastPackets
 			mutex.Lock()
 			StatMgr.SouthBoundPort[i] = &portPonStat
 			mutex.Unlock()
 			log.Debugf("Received-PON-Stats-for-Port %v : %v", i, StatMgr.SouthBoundPort[i])
 		}
 	}

 	/*
 	   Based upon the intf_id map to an nni port or a pon port
 	   the intf_id is the key to the north or south bound collections

 	   Based upon the intf_id the port object (nni_port or pon_port) will
 	   have its data attr. updated by the current dataset collected.

 	   For prefixing the rule is currently to use the port number and not the intf_id
 	*/
 	//FIXME : Just use first NNI for now
 	/* TODO should the data be marshaled before sending it ?
 	   if IntfID == IntfIdToPortNo(0, voltha.Port_ETHERNET_NNI) {
 	       //NNI port (just the first one)
 	       err = UpdatePortObjectKpiData(StatMgr.NorthBoundPorts[PortStats.IntfID], PMData)
 	   } else {
 	       //PON ports
 	       err = UpdatePortObjectKpiData(SouthboundPorts[PortStats.IntfID], PMData)
 	   }
 	   if (err != nil) {
 	       log.Error("Error publishing statistics data")
 	   }
 	*/

 }
	/*
	* Copyright 2019-present Open Networking Foundation

	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at

	* http://www.apache.org/licenses/LICENSE-2.0

	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*/

	//Package adaptercore provides the utility for olt devices, flows and statistics
	package adaptercore

	import (
	"fmt"
	"github.com/opencord/voltha-lib-go/v3/pkg/log"
	"github.com/opencord/voltha-protos/v3/go/openolt"
	"github.com/opencord/voltha-protos/v3/go/voltha"
	"sync"
	"time"
	)

	var mutex = &sync.Mutex{}

	// PonPort representation
	type PonPort struct {
	/*
	This is a highly reduced version taken from the adtran pon_port.
	TODO: Extend for use in the openolt adapter set.
	*/
	/* MAX_ONUS_SUPPORTED = 256
	DEFAULT_ENABLED = False
	MAX_DEPLOYMENT_RANGE = 25000 # Meters (OLT-PB maximum)

	_MCAST_ONU_ID = 253
	_MCAST_ALLOC_BASE = 0x500

	_SUPPORTED_ACTIVATION_METHODS = ['autodiscovery'] # , 'autoactivate']
	_SUPPORTED_AUTHENTICATION_METHODS = ['serial-number']
	*/
	PONID uint32
	DeviceID string
	IntfID uint32
	PortNum uint32
	PortID uint32
	Label string
	ONUs map[uint32]interface{}
	ONUsByID map[uint32]interface{}

	RxBytes uint64
	RxPackets uint64
	RxUcastPackets uint64
	RxMcastPackets uint64
	RxBcastPackets uint64
	RxErrorPackets uint64
	TxBytes uint64
	TxPackets uint64
	TxUcastPackets uint64
	TxMcastPackets uint64
	TxBcastPackets uint64
	TxErrorPackets uint64
	RxCrcErrors uint64
	BipErrors uint64
	}

	// NewPONPort returns a new instance of PonPort initialized with given PONID, DeviceID, IntfID and PortNum
	func NewPONPort(PONID uint32, DeviceID string, IntfID uint32, PortNum uint32) *PonPort {

	var PON PonPort

	PON.PONID = PONID
	PON.DeviceID = DeviceID
	PON.IntfID = IntfID
	PON.PortNum = PortNum
	PON.PortID = 0
	PON.Label = fmt.Sprintf("%s%d", "pon-", PONID)

	PON.ONUs = make(map[uint32]interface{})
	PON.ONUsByID = make(map[uint32]interface{})

	/*
	Statistics taken from nni_port
	self.intf_id = 0 #handled by getter
	self.port_no = 0 #handled by getter
	self.port_id = 0 #handled by getter

	Note: In the current implementation of the kpis coming from the BAL the stats are the
	samne model for NNI and PON.

	TODO: Integrate additional kpis for the PON and other southbound port objecgts.

	*/

	PON.RxBytes = 0
	PON.RxPackets = 0
	PON.RxUcastPackets = 0
	PON.RxMcastPackets = 0
	PON.RxBcastPackets = 0
	PON.RxErrorPackets = 0
	PON.TxBytes = 0
	PON.TxPackets = 0
	PON.TxUcastPackets = 0
	PON.TxMcastPackets = 0
	PON.TxBcastPackets = 0
	PON.TxErrorPackets = 0
	PON.RxCrcErrors = 0
	PON.BipErrors = 0

	/* def __str__(self):
	return "PonPort-{}: Admin: {}, Oper: {}, OLT: {}".format(self._label,
	self._admin_state,
	self._oper_status,
	self.olt)
	*/
	return &PON
	}

	// NniPort representation
	type NniPort struct {
	/*
	Northbound network port, often Ethernet-based

	This is a highly reduced version taken from the adtran nni_port code set
	TODO: add functions to allow for port specific values and operations
	*/
	PortNum uint32
	Name string
	LogicalPort uint32
	IntfID uint32

	RxBytes uint64
	RxPackets uint64
	RxUcastPackets uint64
	RxMcastPackets uint64
	RxBcastPackets uint64
	RxErrorPackets uint64
	TxBytes uint64
	TxPackets uint64
	TxUcastPackets uint64
	TxMcastPackets uint64
	TxBcastPackets uint64
	TxErrorPackets uint64
	RxCrcErrors uint64
	BipErrors uint64
	}

	// NewNniPort returns a new instance of NniPort initialized with the given PortNum and IntfID
	func NewNniPort(PortNum uint32, IntfID uint32) *NniPort {

	var NNI NniPort

	NNI.PortNum = PortNum
	NNI.Name = fmt.Sprintf("%s%d", "nni-", PortNum)
	NNI.IntfID = IntfID

	NNI.RxBytes = 0
	NNI.RxPackets = 0
	NNI.RxUcastPackets = 0
	NNI.RxMcastPackets = 0
	NNI.RxBcastPackets = 0
	NNI.RxErrorPackets = 0
	NNI.TxBytes = 0
	NNI.TxPackets = 0
	NNI.TxUcastPackets = 0
	NNI.TxMcastPackets = 0
	NNI.TxBcastPackets = 0
	NNI.TxErrorPackets = 0
	NNI.RxCrcErrors = 0
	NNI.BipErrors = 0

	return &NNI
	}

	// OpenOltStatisticsMgr structure
	type OpenOltStatisticsMgr struct {
	Device *DeviceHandler
	NorthBoundPort map[uint32]*NniPort
	SouthBoundPort map[uint32]*PonPort
	// TODO PMMetrics Metrics
	}

	// NewOpenOltStatsMgr returns a new instance of the OpenOltStatisticsMgr
	func NewOpenOltStatsMgr(Dev DeviceHandler) OpenOltStatisticsMgr {

	var StatMgr OpenOltStatisticsMgr

	StatMgr.Device = Dev
	// TODO call metric PMMetric =
	// Northbound and Southbound ports
	// added to initialize the pm_metrics
	var Ports interface{}
	Ports, _ = InitPorts("nni", Dev.deviceID, 1)
	StatMgr.NorthBoundPort, _ = Ports.(map[uint32]*NniPort)
	NumPonPorts := Dev.resourceMgr.DevInfo.GetPonPorts()
	Ports, _ = InitPorts("pon", Dev.deviceID, NumPonPorts)
	StatMgr.SouthBoundPort, _ = Ports.(map[uint32]*PonPort)
	return &StatMgr
	}

	// InitPorts collects the port objects: nni and pon that are updated with the current data from the OLT
	func InitPorts(Intftype string, DeviceID string, numOfPorts uint32) (interface{}, error) {
	/*
	This method collects the port objects: nni and pon that are updated with the
	current data from the OLT

	Both the northbound (nni) and southbound ports are indexed by the interface id (intf_id)
	and NOT the port number. When the port object is instantiated it will contain the intf_id and
	port_no values

	:param type:
	:return:
	*/
	var i uint32
	if Intftype == "nni" {
	NniPorts := make(map[uint32]*NniPort)
	for i = 0; i < numOfPorts; i++ {
	Port := BuildPortObject(i, "nni", DeviceID).(*NniPort)
	NniPorts[Port.IntfID] = Port
	}
	return NniPorts, nil
	} else if Intftype == "pon" {
	PONPorts := make(map[uint32]*PonPort)
	for i = 0; i < numOfPorts; i++ {
	PONPort := BuildPortObject(i, "pon", DeviceID).(*PonPort)
	PONPorts[PortNoToIntfID(PONPort.IntfID, voltha.Port_PON_OLT)] = PONPort
	}
	return PONPorts, nil
	} else {
	log.Errorf("Invalid type of interface %s", Intftype)
	return nil, NewErrInvalidValue(log.Fields{"interface-type": Intftype}, nil)
	}
	}

	// BuildPortObject allows for updating north and southbound ports, newly discovered ports, and devices
	func BuildPortObject(PortNum uint32, IntfType string, DeviceID string) interface{} {
	/*
	Separate method to allow for updating north and southbound ports
	newly discovered ports and devices

	:param port_num:
	:param type:
	:return:
	*/

	//This builds a port object which is added to the
	//appropriate northbound or southbound values
	if IntfType == "nni" {
	IntfID := IntfIDToPortNo(PortNum, voltha.Port_ETHERNET_NNI)
	nniID := PortNoToIntfID(IntfID, voltha.Port_ETHERNET_NNI)
	log.Debugf("NniID %v", nniID)
	return NewNniPort(PortNum, nniID)
	} else if IntfType == "pon" {
	// PON ports require a different configuration
	// intf_id and pon_id are currently equal.
	IntfID := IntfIDToPortNo(PortNum, voltha.Port_PON_OLT)
	PONID := PortNoToIntfID(IntfID, voltha.Port_PON_OLT)
	log.Debugf("PonID %v", PONID)
	return NewPONPort(PONID, DeviceID, IntfID, PortNum)
	} else {
	log.Errorf("Invalid type of interface %s", IntfType)
	return nil
	}
	}

	// collectNNIMetrics will collect the nni port metrics
	func (StatMgr *OpenOltStatisticsMgr) collectNNIMetrics(nniID uint32) map[string]float32 {

	nnival := make(map[string]float32)
	mutex.Lock()
	cm := StatMgr.Device.portStats.NorthBoundPort[nniID]
	mutex.Unlock()
	metricName := StatMgr.Device.metrics.GetSubscriberMetrics()

	if metricName != nil && len(metricName) > 0 {
	for mName := range metricName {
	switch mName {
	case "rx_bytes":
	nnival["RxBytes"] = float32(cm.RxBytes)
	case "rx_packets":
	nnival["RxPackets"] = float32(cm.RxPackets)
	case "rx_ucast_packets":
	nnival["RxUcastPackets"] = float32(cm.RxUcastPackets)
	case "rx_mcast_packets":
	nnival["RxMcastPackets"] = float32(cm.RxMcastPackets)
	case "rx_bcast_packets":
	nnival["RxBcastPackets"] = float32(cm.RxBcastPackets)
	case "tx_bytes":
	nnival["TxBytes"] = float32(cm.TxBytes)
	case "tx_packets":
	nnival["TxPackets"] = float32(cm.TxPackets)
	case "tx_mcast_packets":
	nnival["TxMcastPackets"] = float32(cm.TxMcastPackets)
	case "tx_bcast_packets":
	nnival["TxBcastPackets"] = float32(cm.TxBcastPackets)
	}
	}
	}
	return nnival
	}

	// collectPONMetrics will collect the pon port metrics
	func (StatMgr *OpenOltStatisticsMgr) collectPONMetrics(pID uint32) map[string]float32 {

	ponval := make(map[string]float32)
	mutex.Lock()
	cm := StatMgr.Device.portStats.SouthBoundPort[pID]
	mutex.Unlock()
	metricName := StatMgr.Device.metrics.GetSubscriberMetrics()

	if metricName != nil && len(metricName) > 0 {
	for mName := range metricName {
	switch mName {
	case "rx_bytes":
	ponval["RxBytes"] = float32(cm.RxBytes)
	case "rx_packets":
	ponval["RxPackets"] = float32(cm.RxPackets)
	// these are not supported in OpenOlt Agent now
	// will return zero until supported
	case "rx_ucast_packets":
	ponval["RxUcastPackets"] = float32(cm.RxUcastPackets)
	case "rx_mcast_packets":
	ponval["RxMcastPackets"] = float32(cm.RxMcastPackets)
	case "rx_bcast_packets":
	ponval["RxBcastPackets"] = float32(cm.RxBcastPackets)
	// End will return zero until supported
	case "tx_bytes":
	ponval["TxBytes"] = float32(cm.TxBytes)
	case "tx_packets":
	ponval["TxPackets"] = float32(cm.TxPackets)
	// these are not supported in OpenOlt Agent now
	// will return zero until supported
	case "tx_ucast_packets":
	ponval["TxUcastPackets"] = float32(cm.TxUcastPackets)
	case "tx_mcast_packets":
	ponval["TxMcastPackets"] = float32(cm.TxMcastPackets)
	case "tx_bcast_packets":
	ponval["TxBcastPackets"] = float32(cm.TxBcastPackets)
	}
	}
	}
	return ponval
	}

	// publishMatrics will publish the pon port metrics
	func (StatMgr OpenOltStatisticsMgr) publishMetrics(portType string, val map[string]float32, portnum uint32, context map[string]string, devID string) {
	log.Debugf("Post-%v %v", portType, val)

	var metricInfo voltha.MetricInformation
	var ke voltha.KpiEvent2
	var volthaEventSubCatgry voltha.EventSubCategory_Types

	if portType == "NNIStats" {
	volthaEventSubCatgry = voltha.EventSubCategory_NNI
	} else {
	volthaEventSubCatgry = voltha.EventSubCategory_PON
	}

	raisedTs := time.Now().UnixNano()
	mmd := voltha.MetricMetaData{
	Title: portType,
	Ts: float64(raisedTs),
	Context: context,
	DeviceId: devID,
	}

	metricInfo.Metadata = &mmd
	metricInfo.Metrics = val

	ke.SliceData = []*voltha.MetricInformation{&metricInfo}
	ke.Type = voltha.KpiEventType_slice
	ke.Ts = float64(time.Now().UnixNano())

	if err := StatMgr.Device.EventProxy.SendKpiEvent("STATS_EVENT", &ke, voltha.EventCategory_EQUIPMENT, volthaEventSubCatgry, raisedTs); err != nil {
	log.Errorw("Failed to send Pon stats", log.Fields{"err": err})
	}

	}

	// PortStatisticsIndication handles the port statistics indication
	func (StatMgr OpenOltStatisticsMgr) PortStatisticsIndication(PortStats openolt.PortStatistics, NumPonPorts uint32) {
	log.Debugf("port-stats-collected %v", PortStats)
	StatMgr.PortsStatisticsKpis(PortStats, NumPonPorts)
	log.Infow("Received port stats indication", log.Fields{"PortStats": PortStats})
	// TODO send stats to core topic to the voltha kafka or a different kafka ?
	}

	// FlowStatisticsIndication to be implemented
	func FlowStatisticsIndication(self, FlowStats *openolt.FlowStatistics) {
	log.Debugf("flow-stats-collected %v", FlowStats)
	//TODO send to kafka ?
	}

	// PortsStatisticsKpis map the port stats values into a dictionary, creates the kpiEvent and then publish to Kafka
	func (StatMgr OpenOltStatisticsMgr) PortsStatisticsKpis(PortStats openolt.PortStatistics, NumPonPorts uint32) {

	/*map the port stats values into a dictionary
	Create a kpoEvent and publish to Kafka

	:param port_stats:
	:return:
	*/
	//var err error
	IntfID := PortStats.IntfId

	if (IntfIDToPortNo(1, voltha.Port_ETHERNET_NNI) < IntfID) &&
	(IntfID < IntfIDToPortNo(4, voltha.Port_ETHERNET_NNI)) {
	/*
	for this release we are only interested in the first NNI for
	Northbound.
	we are not using the other 3
	*/
	return
	} else if IntfIDToPortNo(0, voltha.Port_ETHERNET_NNI) == IntfID {

	var portNNIStat NniPort
	portNNIStat.IntfID = IntfID
	portNNIStat.PortNum = uint32(0)
	portNNIStat.RxBytes = PortStats.RxBytes
	portNNIStat.RxPackets = PortStats.RxPackets
	portNNIStat.RxUcastPackets = PortStats.RxUcastPackets
	portNNIStat.RxMcastPackets = PortStats.RxMcastPackets
	portNNIStat.RxBcastPackets = PortStats.RxBcastPackets
	portNNIStat.TxBytes = PortStats.TxBytes
	portNNIStat.TxPackets = PortStats.TxPackets
	portNNIStat.TxUcastPackets = PortStats.TxUcastPackets
	portNNIStat.TxMcastPackets = PortStats.TxMcastPackets
	portNNIStat.TxBcastPackets = PortStats.TxBcastPackets
	mutex.Lock()
	StatMgr.NorthBoundPort[0] = &portNNIStat
	mutex.Unlock()
	log.Debugf("Received-NNI-Stats: %v", StatMgr.NorthBoundPort)
	}
	for i := uint32(0); i < NumPonPorts; i++ {

	if IntfIDToPortNo(i, voltha.Port_PON_OLT) == IntfID {
	var portPonStat PonPort
	portPonStat.IntfID = IntfID
	portPonStat.PortNum = i
	portPonStat.PONID = i
	portPonStat.RxBytes = PortStats.RxBytes
	portPonStat.RxPackets = PortStats.RxPackets
	portPonStat.RxUcastPackets = PortStats.RxUcastPackets
	portPonStat.RxMcastPackets = PortStats.RxMcastPackets
	portPonStat.RxBcastPackets = PortStats.RxBcastPackets
	portPonStat.TxBytes = PortStats.TxBytes
	portPonStat.TxPackets = PortStats.TxPackets
	portPonStat.TxUcastPackets = PortStats.TxUcastPackets
	portPonStat.TxMcastPackets = PortStats.TxMcastPackets
	portPonStat.TxBcastPackets = PortStats.TxBcastPackets
	mutex.Lock()
	StatMgr.SouthBoundPort[i] = &portPonStat
	mutex.Unlock()
	log.Debugf("Received-PON-Stats-for-Port %v : %v", i, StatMgr.SouthBoundPort[i])
	}
	}

	/*
	Based upon the intf_id map to an nni port or a pon port
	the intf_id is the key to the north or south bound collections

	Based upon the intf_id the port object (nni_port or pon_port) will
	have its data attr. updated by the current dataset collected.

	For prefixing the rule is currently to use the port number and not the intf_id
	*/
	//FIXME : Just use first NNI for now
	/* TODO should the data be marshaled before sending it ?
	if IntfID == IntfIdToPortNo(0, voltha.Port_ETHERNET_NNI) {
	//NNI port (just the first one)
	err = UpdatePortObjectKpiData(StatMgr.NorthBoundPorts[PortStats.IntfID], PMData)
	} else {
	//PON ports
	err = UpdatePortObjectKpiData(SouthboundPorts[PortStats.IntfID], PMData)
	}
	if (err != nil) {
	log.Error("Error publishing statistics data")
	}
	*/

	}