| // Protocol Buffers - Google's data interchange format |
| // Copyright 2008 Google Inc. All rights reserved. |
| // https://developers.google.com/protocol-buffers/ |
| // |
| // Redistribution and use in source and binary forms, with or without |
| // modification, are permitted provided that the following conditions are |
| // met: |
| // |
| // * Redistributions of source code must retain the above copyright |
| // notice, this list of conditions and the following disclaimer. |
| // * Redistributions in binary form must reproduce the above |
| // copyright notice, this list of conditions and the following disclaimer |
| // in the documentation and/or other materials provided with the |
| // distribution. |
| // * Neither the name of Google Inc. nor the names of its |
| // contributors may be used to endorse or promote products derived from |
| // this software without specific prior written permission. |
| // |
| // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| // "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| // LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| // A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| // OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| // SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| // LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| // DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| // (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| // OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| |
| // Author: kenton@google.com (Kenton Varda) |
| // Based on original Protocol Buffers design by |
| // Sanjay Ghemawat, Jeff Dean, and others. |
| // |
| // The messages in this file describe the definitions found in .proto files. |
| // A valid .proto file can be translated directly to a FileDescriptorProto |
| // without any other information (e.g. without reading its imports). |
| |
| |
| syntax = "proto2"; |
| |
| package google.protobuf; |
| option go_package = "github.com/golang/protobuf/protoc-gen-go/descriptor;descriptor"; |
| option java_package = "com.google.protobuf"; |
| option java_outer_classname = "DescriptorProtos"; |
| option csharp_namespace = "Google.Protobuf.Reflection"; |
| option objc_class_prefix = "GPB"; |
| option cc_enable_arenas = true; |
| |
| // descriptor.proto must be optimized for speed because reflection-based |
| // algorithms don't work during bootstrapping. |
| option optimize_for = SPEED; |
| |
| // The protocol compiler can output a FileDescriptorSet containing the .proto |
| // files it parses. |
| message FileDescriptorSet { |
| repeated FileDescriptorProto file = 1; |
| } |
| |
| // Describes a complete .proto file. |
| message FileDescriptorProto { |
| optional string name = 1; // file name, relative to root of source tree |
| optional string package = 2; // e.g. "foo", "foo.bar", etc. |
| |
| // Names of files imported by this file. |
| repeated string dependency = 3; |
| // Indexes of the public imported files in the dependency list above. |
| repeated int32 public_dependency = 10; |
| // Indexes of the weak imported files in the dependency list. |
| // For Google-internal migration only. Do not use. |
| repeated int32 weak_dependency = 11; |
| |
| // All top-level definitions in this file. |
| repeated DescriptorProto message_type = 4; |
| repeated EnumDescriptorProto enum_type = 5; |
| repeated ServiceDescriptorProto service = 6; |
| repeated FieldDescriptorProto extension = 7; |
| |
| optional FileOptions options = 8; |
| |
| // This field contains optional information about the original source code. |
| // You may safely remove this entire field without harming runtime |
| // functionality of the descriptors -- the information is needed only by |
| // development tools. |
| optional SourceCodeInfo source_code_info = 9; |
| |
| // The syntax of the proto file. |
| // The supported values are "proto2" and "proto3". |
| optional string syntax = 12; |
| } |
| |
| // Describes a message type. |
| message DescriptorProto { |
| optional string name = 1; |
| |
| repeated FieldDescriptorProto field = 2; |
| repeated FieldDescriptorProto extension = 6; |
| |
| repeated DescriptorProto nested_type = 3; |
| repeated EnumDescriptorProto enum_type = 4; |
| |
| message ExtensionRange { |
| optional int32 start = 1; |
| optional int32 end = 2; |
| |
| optional ExtensionRangeOptions options = 3; |
| } |
| repeated ExtensionRange extension_range = 5; |
| |
| repeated OneofDescriptorProto oneof_decl = 8; |
| |
| optional MessageOptions options = 7; |
| |
| // Range of reserved tag numbers. Reserved tag numbers may not be used by |
| // fields or extension ranges in the same message. Reserved ranges may |
| // not overlap. |
| message ReservedRange { |
| optional int32 start = 1; // Inclusive. |
| optional int32 end = 2; // Exclusive. |
| } |
| repeated ReservedRange reserved_range = 9; |
| // Reserved field names, which may not be used by fields in the same message. |
| // A given name may only be reserved once. |
| repeated string reserved_name = 10; |
| } |
| |
| message ExtensionRangeOptions { |
| // The parser stores options it doesn't recognize here. See above. |
| repeated UninterpretedOption uninterpreted_option = 999; |
| |
| // Clients can define custom options in extensions of this message. See above. |
| extensions 1000 to max; |
| } |
| |
| // Describes a field within a message. |
| message FieldDescriptorProto { |
| enum Type { |
| // 0 is reserved for errors. |
| // Order is weird for historical reasons. |
| TYPE_DOUBLE = 1; |
| TYPE_FLOAT = 2; |
| // Not ZigZag encoded. Negative numbers take 10 bytes. Use TYPE_SINT64 if |
| // negative values are likely. |
| TYPE_INT64 = 3; |
| TYPE_UINT64 = 4; |
| // Not ZigZag encoded. Negative numbers take 10 bytes. Use TYPE_SINT32 if |
| // negative values are likely. |
| TYPE_INT32 = 5; |
| TYPE_FIXED64 = 6; |
| TYPE_FIXED32 = 7; |
| TYPE_BOOL = 8; |
| TYPE_STRING = 9; |
| // Tag-delimited aggregate. |
| // Group type is deprecated and not supported in proto3. However, Proto3 |
| // implementations should still be able to parse the group wire format and |
| // treat group fields as unknown fields. |
| TYPE_GROUP = 10; |
| TYPE_MESSAGE = 11; // Length-delimited aggregate. |
| |
| // New in version 2. |
| TYPE_BYTES = 12; |
| TYPE_UINT32 = 13; |
| TYPE_ENUM = 14; |
| TYPE_SFIXED32 = 15; |
| TYPE_SFIXED64 = 16; |
| TYPE_SINT32 = 17; // Uses ZigZag encoding. |
| TYPE_SINT64 = 18; // Uses ZigZag encoding. |
| }; |
| |
| enum Label { |
| // 0 is reserved for errors |
| LABEL_OPTIONAL = 1; |
| LABEL_REQUIRED = 2; |
| LABEL_REPEATED = 3; |
| }; |
| |
| optional string name = 1; |
| optional int32 number = 3; |
| optional Label label = 4; |
| |
| // If type_name is set, this need not be set. If both this and type_name |
| // are set, this must be one of TYPE_ENUM, TYPE_MESSAGE or TYPE_GROUP. |
| optional Type type = 5; |
| |
| // For message and enum types, this is the name of the type. If the name |
| // starts with a '.', it is fully-qualified. Otherwise, C++-like scoping |
| // rules are used to find the type (i.e. first the nested types within this |
| // message are searched, then within the parent, on up to the root |
| // namespace). |
| optional string type_name = 6; |
| |
| // For extensions, this is the name of the type being extended. It is |
| // resolved in the same manner as type_name. |
| optional string extendee = 2; |
| |
| // For numeric types, contains the original text representation of the value. |
| // For booleans, "true" or "false". |
| // For strings, contains the default text contents (not escaped in any way). |
| // For bytes, contains the C escaped value. All bytes >= 128 are escaped. |
| // TODO(kenton): Base-64 encode? |
| optional string default_value = 7; |
| |
| // If set, gives the index of a oneof in the containing type's oneof_decl |
| // list. This field is a member of that oneof. |
| optional int32 oneof_index = 9; |
| |
| // JSON name of this field. The value is set by protocol compiler. If the |
| // user has set a "json_name" option on this field, that option's value |
| // will be used. Otherwise, it's deduced from the field's name by converting |
| // it to camelCase. |
| optional string json_name = 10; |
| |
| optional FieldOptions options = 8; |
| } |
| |
| // Describes a oneof. |
| message OneofDescriptorProto { |
| optional string name = 1; |
| optional OneofOptions options = 2; |
| } |
| |
| // Describes an enum type. |
| message EnumDescriptorProto { |
| optional string name = 1; |
| |
| repeated EnumValueDescriptorProto value = 2; |
| |
| optional EnumOptions options = 3; |
| |
| // Range of reserved numeric values. Reserved values may not be used by |
| // entries in the same enum. Reserved ranges may not overlap. |
| // |
| // Note that this is distinct from DescriptorProto.ReservedRange in that it |
| // is inclusive such that it can appropriately represent the entire int32 |
| // domain. |
| message EnumReservedRange { |
| optional int32 start = 1; // Inclusive. |
| optional int32 end = 2; // Inclusive. |
| } |
| |
| // Range of reserved numeric values. Reserved numeric values may not be used |
| // by enum values in the same enum declaration. Reserved ranges may not |
| // overlap. |
| repeated EnumReservedRange reserved_range = 4; |
| |
| // Reserved enum value names, which may not be reused. A given name may only |
| // be reserved once. |
| repeated string reserved_name = 5; |
| } |
| |
| // Describes a value within an enum. |
| message EnumValueDescriptorProto { |
| optional string name = 1; |
| optional int32 number = 2; |
| |
| optional EnumValueOptions options = 3; |
| } |
| |
| // Describes a service. |
| message ServiceDescriptorProto { |
| optional string name = 1; |
| repeated MethodDescriptorProto method = 2; |
| |
| optional ServiceOptions options = 3; |
| } |
| |
| // Describes a method of a service. |
| message MethodDescriptorProto { |
| optional string name = 1; |
| |
| // Input and output type names. These are resolved in the same way as |
| // FieldDescriptorProto.type_name, but must refer to a message type. |
| optional string input_type = 2; |
| optional string output_type = 3; |
| |
| optional MethodOptions options = 4; |
| |
| // Identifies if client streams multiple client messages |
| optional bool client_streaming = 5 [default=false]; |
| // Identifies if server streams multiple server messages |
| optional bool server_streaming = 6 [default=false]; |
| } |
| |
| |
| // =================================================================== |
| // Options |
| |
| // Each of the definitions above may have "options" attached. These are |
| // just annotations which may cause code to be generated slightly differently |
| // or may contain hints for code that manipulates protocol messages. |
| // |
| // Clients may define custom options as extensions of the *Options messages. |
| // These extensions may not yet be known at parsing time, so the parser cannot |
| // store the values in them. Instead it stores them in a field in the *Options |
| // message called uninterpreted_option. This field must have the same name |
| // across all *Options messages. We then use this field to populate the |
| // extensions when we build a descriptor, at which point all protos have been |
| // parsed and so all extensions are known. |
| // |
| // Extension numbers for custom options may be chosen as follows: |
| // * For options which will only be used within a single application or |
| // organization, or for experimental options, use field numbers 50000 |
| // through 99999. It is up to you to ensure that you do not use the |
| // same number for multiple options. |
| // * For options which will be published and used publicly by multiple |
| // independent entities, e-mail protobuf-global-extension-registry@google.com |
| // to reserve extension numbers. Simply provide your project name (e.g. |
| // Objective-C plugin) and your project website (if available) -- there's no |
| // need to explain how you intend to use them. Usually you only need one |
| // extension number. You can declare multiple options with only one extension |
| // number by putting them in a sub-message. See the Custom Options section of |
| // the docs for examples: |
| // https://developers.google.com/protocol-buffers/docs/proto#options |
| // If this turns out to be popular, a web service will be set up |
| // to automatically assign option numbers. |
| |
| |
| message FileOptions { |
| |
| // Sets the Java package where classes generated from this .proto will be |
| // placed. By default, the proto package is used, but this is often |
| // inappropriate because proto packages do not normally start with backwards |
| // domain names. |
| optional string java_package = 1; |
| |
| |
| // If set, all the classes from the .proto file are wrapped in a single |
| // outer class with the given name. This applies to both Proto1 |
| // (equivalent to the old "--one_java_file" option) and Proto2 (where |
| // a .proto always translates to a single class, but you may want to |
| // explicitly choose the class name). |
| optional string java_outer_classname = 8; |
| |
| // If set true, then the Java code generator will generate a separate .java |
| // file for each top-level message, enum, and service defined in the .proto |
| // file. Thus, these types will *not* be nested inside the outer class |
| // named by java_outer_classname. However, the outer class will still be |
| // generated to contain the file's getDescriptor() method as well as any |
| // top-level extensions defined in the file. |
| optional bool java_multiple_files = 10 [default=false]; |
| |
| // This option does nothing. |
| optional bool java_generate_equals_and_hash = 20 [deprecated=true]; |
| |
| // If set true, then the Java2 code generator will generate code that |
| // throws an exception whenever an attempt is made to assign a non-UTF-8 |
| // byte sequence to a string field. |
| // Message reflection will do the same. |
| // However, an extension field still accepts non-UTF-8 byte sequences. |
| // This option has no effect on when used with the lite runtime. |
| optional bool java_string_check_utf8 = 27 [default=false]; |
| |
| |
| // Generated classes can be optimized for speed or code size. |
| enum OptimizeMode { |
| SPEED = 1; // Generate complete code for parsing, serialization, |
| // etc. |
| CODE_SIZE = 2; // Use ReflectionOps to implement these methods. |
| LITE_RUNTIME = 3; // Generate code using MessageLite and the lite runtime. |
| } |
| optional OptimizeMode optimize_for = 9 [default=SPEED]; |
| |
| // Sets the Go package where structs generated from this .proto will be |
| // placed. If omitted, the Go package will be derived from the following: |
| // - The basename of the package import path, if provided. |
| // - Otherwise, the package statement in the .proto file, if present. |
| // - Otherwise, the basename of the .proto file, without extension. |
| optional string go_package = 11; |
| |
| |
| |
| // Should generic services be generated in each language? "Generic" services |
| // are not specific to any particular RPC system. They are generated by the |
| // main code generators in each language (without additional plugins). |
| // Generic services were the only kind of service generation supported by |
| // early versions of google.protobuf. |
| // |
| // Generic services are now considered deprecated in favor of using plugins |
| // that generate code specific to your particular RPC system. Therefore, |
| // these default to false. Old code which depends on generic services should |
| // explicitly set them to true. |
| optional bool cc_generic_services = 16 [default=false]; |
| optional bool java_generic_services = 17 [default=false]; |
| optional bool py_generic_services = 18 [default=false]; |
| optional bool php_generic_services = 42 [default=false]; |
| |
| // Is this file deprecated? |
| // Depending on the target platform, this can emit Deprecated annotations |
| // for everything in the file, or it will be completely ignored; in the very |
| // least, this is a formalization for deprecating files. |
| optional bool deprecated = 23 [default=false]; |
| |
| // Enables the use of arenas for the proto messages in this file. This applies |
| // only to generated classes for C++. |
| optional bool cc_enable_arenas = 31 [default=false]; |
| |
| |
| // Sets the objective c class prefix which is prepended to all objective c |
| // generated classes from this .proto. There is no default. |
| optional string objc_class_prefix = 36; |
| |
| // Namespace for generated classes; defaults to the package. |
| optional string csharp_namespace = 37; |
| |
| // By default Swift generators will take the proto package and CamelCase it |
| // replacing '.' with underscore and use that to prefix the types/symbols |
| // defined. When this options is provided, they will use this value instead |
| // to prefix the types/symbols defined. |
| optional string swift_prefix = 39; |
| |
| // Sets the php class prefix which is prepended to all php generated classes |
| // from this .proto. Default is empty. |
| optional string php_class_prefix = 40; |
| |
| // Use this option to change the namespace of php generated classes. Default |
| // is empty. When this option is empty, the package name will be used for |
| // determining the namespace. |
| optional string php_namespace = 41; |
| |
| |
| // Use this option to change the namespace of php generated metadata classes. |
| // Default is empty. When this option is empty, the proto file name will be used |
| // for determining the namespace. |
| optional string php_metadata_namespace = 44; |
| |
| // Use this option to change the package of ruby generated classes. Default |
| // is empty. When this option is not set, the package name will be used for |
| // determining the ruby package. |
| optional string ruby_package = 45; |
| |
| // The parser stores options it doesn't recognize here. |
| // See the documentation for the "Options" section above. |
| repeated UninterpretedOption uninterpreted_option = 999; |
| |
| // Clients can define custom options in extensions of this message. |
| // See the documentation for the "Options" section above. |
| extensions 1000 to max; |
| |
| reserved 38; |
| } |
| |
| message MessageOptions { |
| // Set true to use the old proto1 MessageSet wire format for extensions. |
| // This is provided for backwards-compatibility with the MessageSet wire |
| // format. You should not use this for any other reason: It's less |
| // efficient, has fewer features, and is more complicated. |
| // |
| // The message must be defined exactly as follows: |
| // message Foo { |
| // option message_set_wire_format = true; |
| // extensions 4 to max; |
| // } |
| // Note that the message cannot have any defined fields; MessageSets only |
| // have extensions. |
| // |
| // All extensions of your type must be singular messages; e.g. they cannot |
| // be int32s, enums, or repeated messages. |
| // |
| // Because this is an option, the above two restrictions are not enforced by |
| // the protocol compiler. |
| optional bool message_set_wire_format = 1 [default=false]; |
| |
| // Disables the generation of the standard "descriptor()" accessor, which can |
| // conflict with a field of the same name. This is meant to make migration |
| // from proto1 easier; new code should avoid fields named "descriptor". |
| optional bool no_standard_descriptor_accessor = 2 [default=false]; |
| |
| // Is this message deprecated? |
| // Depending on the target platform, this can emit Deprecated annotations |
| // for the message, or it will be completely ignored; in the very least, |
| // this is a formalization for deprecating messages. |
| optional bool deprecated = 3 [default=false]; |
| |
| // Whether the message is an automatically generated map entry type for the |
| // maps field. |
| // |
| // For maps fields: |
| // map<KeyType, ValueType> map_field = 1; |
| // The parsed descriptor looks like: |
| // message MapFieldEntry { |
| // option map_entry = true; |
| // optional KeyType key = 1; |
| // optional ValueType value = 2; |
| // } |
| // repeated MapFieldEntry map_field = 1; |
| // |
| // Implementations may choose not to generate the map_entry=true message, but |
| // use a native map in the target language to hold the keys and values. |
| // The reflection APIs in such implementions still need to work as |
| // if the field is a repeated message field. |
| // |
| // NOTE: Do not set the option in .proto files. Always use the maps syntax |
| // instead. The option should only be implicitly set by the proto compiler |
| // parser. |
| optional bool map_entry = 7; |
| |
| reserved 8; // javalite_serializable |
| reserved 9; // javanano_as_lite |
| |
| // The parser stores options it doesn't recognize here. See above. |
| repeated UninterpretedOption uninterpreted_option = 999; |
| |
| // Clients can define custom options in extensions of this message. See above. |
| extensions 1000 to max; |
| } |
| |
| message FieldOptions { |
| // The ctype option instructs the C++ code generator to use a different |
| // representation of the field than it normally would. See the specific |
| // options below. This option is not yet implemented in the open source |
| // release -- sorry, we'll try to include it in a future version! |
| optional CType ctype = 1 [default = STRING]; |
| enum CType { |
| // Default mode. |
| STRING = 0; |
| |
| CORD = 1; |
| |
| STRING_PIECE = 2; |
| } |
| // The packed option can be enabled for repeated primitive fields to enable |
| // a more efficient representation on the wire. Rather than repeatedly |
| // writing the tag and type for each element, the entire array is encoded as |
| // a single length-delimited blob. In proto3, only explicit setting it to |
| // false will avoid using packed encoding. |
| optional bool packed = 2; |
| |
| // The jstype option determines the JavaScript type used for values of the |
| // field. The option is permitted only for 64 bit integral and fixed types |
| // (int64, uint64, sint64, fixed64, sfixed64). A field with jstype JS_STRING |
| // is represented as JavaScript string, which avoids loss of precision that |
| // can happen when a large value is converted to a floating point JavaScript. |
| // Specifying JS_NUMBER for the jstype causes the generated JavaScript code to |
| // use the JavaScript "number" type. The behavior of the default option |
| // JS_NORMAL is implementation dependent. |
| // |
| // This option is an enum to permit additional types to be added, e.g. |
| // goog.math.Integer. |
| optional JSType jstype = 6 [default = JS_NORMAL]; |
| enum JSType { |
| // Use the default type. |
| JS_NORMAL = 0; |
| |
| // Use JavaScript strings. |
| JS_STRING = 1; |
| |
| // Use JavaScript numbers. |
| JS_NUMBER = 2; |
| } |
| |
| // Should this field be parsed lazily? Lazy applies only to message-type |
| // fields. It means that when the outer message is initially parsed, the |
| // inner message's contents will not be parsed but instead stored in encoded |
| // form. The inner message will actually be parsed when it is first accessed. |
| // |
| // This is only a hint. Implementations are free to choose whether to use |
| // eager or lazy parsing regardless of the value of this option. However, |
| // setting this option true suggests that the protocol author believes that |
| // using lazy parsing on this field is worth the additional bookkeeping |
| // overhead typically needed to implement it. |
| // |
| // This option does not affect the public interface of any generated code; |
| // all method signatures remain the same. Furthermore, thread-safety of the |
| // interface is not affected by this option; const methods remain safe to |
| // call from multiple threads concurrently, while non-const methods continue |
| // to require exclusive access. |
| // |
| // |
| // Note that implementations may choose not to check required fields within |
| // a lazy sub-message. That is, calling IsInitialized() on the outer message |
| // may return true even if the inner message has missing required fields. |
| // This is necessary because otherwise the inner message would have to be |
| // parsed in order to perform the check, defeating the purpose of lazy |
| // parsing. An implementation which chooses not to check required fields |
| // must be consistent about it. That is, for any particular sub-message, the |
| // implementation must either *always* check its required fields, or *never* |
| // check its required fields, regardless of whether or not the message has |
| // been parsed. |
| optional bool lazy = 5 [default=false]; |
| |
| // Is this field deprecated? |
| // Depending on the target platform, this can emit Deprecated annotations |
| // for accessors, or it will be completely ignored; in the very least, this |
| // is a formalization for deprecating fields. |
| optional bool deprecated = 3 [default=false]; |
| |
| // For Google-internal migration only. Do not use. |
| optional bool weak = 10 [default=false]; |
| |
| |
| // The parser stores options it doesn't recognize here. See above. |
| repeated UninterpretedOption uninterpreted_option = 999; |
| |
| // Clients can define custom options in extensions of this message. See above. |
| extensions 1000 to max; |
| |
| reserved 4; // removed jtype |
| } |
| |
| message OneofOptions { |
| // The parser stores options it doesn't recognize here. See above. |
| repeated UninterpretedOption uninterpreted_option = 999; |
| |
| // Clients can define custom options in extensions of this message. See above. |
| extensions 1000 to max; |
| } |
| |
| message EnumOptions { |
| |
| // Set this option to true to allow mapping different tag names to the same |
| // value. |
| optional bool allow_alias = 2; |
| |
| // Is this enum deprecated? |
| // Depending on the target platform, this can emit Deprecated annotations |
| // for the enum, or it will be completely ignored; in the very least, this |
| // is a formalization for deprecating enums. |
| optional bool deprecated = 3 [default=false]; |
| |
| reserved 5; // javanano_as_lite |
| |
| // The parser stores options it doesn't recognize here. See above. |
| repeated UninterpretedOption uninterpreted_option = 999; |
| |
| // Clients can define custom options in extensions of this message. See above. |
| extensions 1000 to max; |
| } |
| |
| message EnumValueOptions { |
| // Is this enum value deprecated? |
| // Depending on the target platform, this can emit Deprecated annotations |
| // for the enum value, or it will be completely ignored; in the very least, |
| // this is a formalization for deprecating enum values. |
| optional bool deprecated = 1 [default=false]; |
| |
| // The parser stores options it doesn't recognize here. See above. |
| repeated UninterpretedOption uninterpreted_option = 999; |
| |
| // Clients can define custom options in extensions of this message. See above. |
| extensions 1000 to max; |
| } |
| |
| message ServiceOptions { |
| |
| // Note: Field numbers 1 through 32 are reserved for Google's internal RPC |
| // framework. We apologize for hoarding these numbers to ourselves, but |
| // we were already using them long before we decided to release Protocol |
| // Buffers. |
| |
| // Is this service deprecated? |
| // Depending on the target platform, this can emit Deprecated annotations |
| // for the service, or it will be completely ignored; in the very least, |
| // this is a formalization for deprecating services. |
| optional bool deprecated = 33 [default=false]; |
| |
| // The parser stores options it doesn't recognize here. See above. |
| repeated UninterpretedOption uninterpreted_option = 999; |
| |
| // Clients can define custom options in extensions of this message. See above. |
| extensions 1000 to max; |
| } |
| |
| message MethodOptions { |
| |
| // Note: Field numbers 1 through 32 are reserved for Google's internal RPC |
| // framework. We apologize for hoarding these numbers to ourselves, but |
| // we were already using them long before we decided to release Protocol |
| // Buffers. |
| |
| // Is this method deprecated? |
| // Depending on the target platform, this can emit Deprecated annotations |
| // for the method, or it will be completely ignored; in the very least, |
| // this is a formalization for deprecating methods. |
| optional bool deprecated = 33 [default=false]; |
| |
| // Is this method side-effect-free (or safe in HTTP parlance), or idempotent, |
| // or neither? HTTP based RPC implementation may choose GET verb for safe |
| // methods, and PUT verb for idempotent methods instead of the default POST. |
| enum IdempotencyLevel { |
| IDEMPOTENCY_UNKNOWN = 0; |
| NO_SIDE_EFFECTS = 1; // implies idempotent |
| IDEMPOTENT = 2; // idempotent, but may have side effects |
| } |
| optional IdempotencyLevel idempotency_level = |
| 34 [default=IDEMPOTENCY_UNKNOWN]; |
| |
| // The parser stores options it doesn't recognize here. See above. |
| repeated UninterpretedOption uninterpreted_option = 999; |
| |
| // Clients can define custom options in extensions of this message. See above. |
| extensions 1000 to max; |
| } |
| |
| |
| // A message representing a option the parser does not recognize. This only |
| // appears in options protos created by the compiler::Parser class. |
| // DescriptorPool resolves these when building Descriptor objects. Therefore, |
| // options protos in descriptor objects (e.g. returned by Descriptor::options(), |
| // or produced by Descriptor::CopyTo()) will never have UninterpretedOptions |
| // in them. |
| message UninterpretedOption { |
| // The name of the uninterpreted option. Each string represents a segment in |
| // a dot-separated name. is_extension is true iff a segment represents an |
| // extension (denoted with parentheses in options specs in .proto files). |
| // E.g.,{ ["foo", false], ["bar.baz", true], ["qux", false] } represents |
| // "foo.(bar.baz).qux". |
| message NamePart { |
| required string name_part = 1; |
| required bool is_extension = 2; |
| } |
| repeated NamePart name = 2; |
| |
| // The value of the uninterpreted option, in whatever type the tokenizer |
| // identified it as during parsing. Exactly one of these should be set. |
| optional string identifier_value = 3; |
| optional uint64 positive_int_value = 4; |
| optional int64 negative_int_value = 5; |
| optional double double_value = 6; |
| optional bytes string_value = 7; |
| optional string aggregate_value = 8; |
| } |
| |
| // =================================================================== |
| // Optional source code info |
| |
| // Encapsulates information about the original source file from which a |
| // FileDescriptorProto was generated. |
| message SourceCodeInfo { |
| // A Location identifies a piece of source code in a .proto file which |
| // corresponds to a particular definition. This information is intended |
| // to be useful to IDEs, code indexers, documentation generators, and similar |
| // tools. |
| // |
| // For example, say we have a file like: |
| // message Foo { |
| // optional string foo = 1; |
| // } |
| // Let's look at just the field definition: |
| // optional string foo = 1; |
| // ^ ^^ ^^ ^ ^^^ |
| // a bc de f ghi |
| // We have the following locations: |
| // span path represents |
| // [a,i) [ 4, 0, 2, 0 ] The whole field definition. |
| // [a,b) [ 4, 0, 2, 0, 4 ] The label (optional). |
| // [c,d) [ 4, 0, 2, 0, 5 ] The type (string). |
| // [e,f) [ 4, 0, 2, 0, 1 ] The name (foo). |
| // [g,h) [ 4, 0, 2, 0, 3 ] The number (1). |
| // |
| // Notes: |
| // - A location may refer to a repeated field itself (i.e. not to any |
| // particular index within it). This is used whenever a set of elements are |
| // logically enclosed in a single code segment. For example, an entire |
| // extend block (possibly containing multiple extension definitions) will |
| // have an outer location whose path refers to the "extensions" repeated |
| // field without an index. |
| // - Multiple locations may have the same path. This happens when a single |
| // logical declaration is spread out across multiple places. The most |
| // obvious example is the "extend" block again -- there may be multiple |
| // extend blocks in the same scope, each of which will have the same path. |
| // - A location's span is not always a subset of its parent's span. For |
| // example, the "extendee" of an extension declaration appears at the |
| // beginning of the "extend" block and is shared by all extensions within |
| // the block. |
| // - Just because a location's span is a subset of some other location's span |
| // does not mean that it is a descendent. For example, a "group" defines |
| // both a type and a field in a single declaration. Thus, the locations |
| // corresponding to the type and field and their components will overlap. |
| // - Code which tries to interpret locations should probably be designed to |
| // ignore those that it doesn't understand, as more types of locations could |
| // be recorded in the future. |
| repeated Location location = 1; |
| message Location { |
| // Identifies which part of the FileDescriptorProto was defined at this |
| // location. |
| // |
| // Each element is a field number or an index. They form a path from |
| // the root FileDescriptorProto to the place where the definition. For |
| // example, this path: |
| // [ 4, 3, 2, 7, 1 ] |
| // refers to: |
| // file.message_type(3) // 4, 3 |
| // .field(7) // 2, 7 |
| // .name() // 1 |
| // This is because FileDescriptorProto.message_type has field number 4: |
| // repeated DescriptorProto message_type = 4; |
| // and DescriptorProto.field has field number 2: |
| // repeated FieldDescriptorProto field = 2; |
| // and FieldDescriptorProto.name has field number 1: |
| // optional string name = 1; |
| // |
| // Thus, the above path gives the location of a field name. If we removed |
| // the last element: |
| // [ 4, 3, 2, 7 ] |
| // this path refers to the whole field declaration (from the beginning |
| // of the label to the terminating semicolon). |
| repeated int32 path = 1 [packed=true]; |
| |
| // Always has exactly three or four elements: start line, start column, |
| // end line (optional, otherwise assumed same as start line), end column. |
| // These are packed into a single field for efficiency. Note that line |
| // and column numbers are zero-based -- typically you will want to add |
| // 1 to each before displaying to a user. |
| repeated int32 span = 2 [packed=true]; |
| |
| // If this SourceCodeInfo represents a complete declaration, these are any |
| // comments appearing before and after the declaration which appear to be |
| // attached to the declaration. |
| // |
| // A series of line comments appearing on consecutive lines, with no other |
| // tokens appearing on those lines, will be treated as a single comment. |
| // |
| // leading_detached_comments will keep paragraphs of comments that appear |
| // before (but not connected to) the current element. Each paragraph, |
| // separated by empty lines, will be one comment element in the repeated |
| // field. |
| // |
| // Only the comment content is provided; comment markers (e.g. //) are |
| // stripped out. For block comments, leading whitespace and an asterisk |
| // will be stripped from the beginning of each line other than the first. |
| // Newlines are included in the output. |
| // |
| // Examples: |
| // |
| // optional int32 foo = 1; // Comment attached to foo. |
| // // Comment attached to bar. |
| // optional int32 bar = 2; |
| // |
| // optional string baz = 3; |
| // // Comment attached to baz. |
| // // Another line attached to baz. |
| // |
| // // Comment attached to qux. |
| // // |
| // // Another line attached to qux. |
| // optional double qux = 4; |
| // |
| // // Detached comment for corge. This is not leading or trailing comments |
| // // to qux or corge because there are blank lines separating it from |
| // // both. |
| // |
| // // Detached comment for corge paragraph 2. |
| // |
| // optional string corge = 5; |
| // /* Block comment attached |
| // * to corge. Leading asterisks |
| // * will be removed. */ |
| // /* Block comment attached to |
| // * grault. */ |
| // optional int32 grault = 6; |
| // |
| // // ignored detached comments. |
| optional string leading_comments = 3; |
| optional string trailing_comments = 4; |
| repeated string leading_detached_comments = 6; |
| } |
| } |
| |
| // Describes the relationship between generated code and its original source |
| // file. A GeneratedCodeInfo message is associated with only one generated |
| // source file, but may contain references to different source .proto files. |
| message GeneratedCodeInfo { |
| // An Annotation connects some span of text in generated code to an element |
| // of its generating .proto file. |
| repeated Annotation annotation = 1; |
| message Annotation { |
| // Identifies the element in the original source .proto file. This field |
| // is formatted the same as SourceCodeInfo.Location.path. |
| repeated int32 path = 1 [packed=true]; |
| |
| // Identifies the filesystem path to the original source .proto. |
| optional string source_file = 2; |
| |
| // Identifies the starting offset in bytes in the generated code |
| // that relates to the identified object. |
| optional int32 begin = 3; |
| |
| // Identifies the ending offset in bytes in the generated code that |
| // relates to the identified offset. The end offset should be one past |
| // the last relevant byte (so the length of the text = end - begin). |
| optional int32 end = 4; |
| } |
| } |