| # |
| # Copyright 2018 the original author or authors. |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| import threading |
| import binascii |
| import grpc |
| import socket |
| import re |
| import structlog |
| import time |
| from twisted.internet import reactor |
| from twisted.internet.defer import inlineCallbacks, returnValue |
| from scapy.layers.l2 import Ether, Dot1Q |
| from transitions import Machine |
| |
| from voltha_protos import openolt_pb2_grpc, openolt_pb2 |
| |
| from pyvoltha.adapters.extensions.alarms.onu.onu_discovery_alarm import OnuDiscoveryAlarm |
| |
| from pyvoltha.common.utils.nethelpers import mac_str_to_tuple |
| from voltha_protos.openflow_13_pb2 import OFPPS_LIVE, OFPPF_FIBER, \ |
| OFPPS_LINK_DOWN, OFPPF_1GB_FD, \ |
| OFPC_GROUP_STATS, OFPC_PORT_STATS, OFPC_TABLE_STATS, OFPC_FLOW_STATS, \ |
| ofp_switch_features, ofp_port, ofp_port_stats, ofp_desc |
| from pyvoltha.common.utils.registry import registry |
| from voltha_protos.common_pb2 import AdminState, OperStatus, ConnectStatus |
| from voltha_protos.device_pb2 import Port, Device |
| from voltha_protos.inter_container_pb2 import SwitchCapability, PortCapability, \ |
| InterAdapterMessageType, InterAdapterOmciMessage |
| from voltha_protos.logical_device_pb2 import LogicalDevice, LogicalPort |
| |
| |
| class OpenoltDevice(object): |
| """ |
| OpenoltDevice state machine: |
| |
| null ----> init ------> connected -----> up -----> down |
| ^ ^ | ^ | | |
| | | | | | | |
| | +-------------+ +---------+ | |
| | | |
| +-----------------------------------------+ |
| """ |
| # pylint: disable=too-many-instance-attributes |
| # pylint: disable=R0904 |
| states = [ |
| 'state_null', 'state_init', 'state_connected', 'state_up', 'state_down' |
| ] |
| |
| transitions = [{ |
| 'trigger': 'go_state_init', |
| 'source': ['state_null', 'state_connected', 'state_down'], |
| 'dest': 'state_init', |
| 'before': 'do_state_init', |
| 'after': 'post_init' |
| }, { |
| 'trigger': 'go_state_connected', |
| 'source': 'state_init', |
| 'dest': 'state_connected', |
| 'before': 'do_state_connected' |
| }, { |
| 'trigger': 'go_state_up', |
| 'source': ['state_connected', 'state_down'], |
| 'dest': 'state_up', |
| 'before': 'do_state_up' |
| }, { |
| 'trigger': 'go_state_down', |
| 'source': ['state_up'], |
| 'dest': 'state_down', |
| 'before': 'do_state_down', |
| 'after': 'post_down' |
| }] |
| |
| def __init__(self, **kwargs): |
| super(OpenoltDevice, self).__init__() |
| |
| self.core_proxy = kwargs['core_proxy'] |
| self.adapter_proxy = kwargs['adapter_proxy'] |
| self.device_num = kwargs['device_num'] |
| self.device = kwargs['device'] |
| self.onus = dict() # int_id.onu_id -> OnuDevice() |
| self.platform_class = kwargs['support_classes']['platform'] |
| self.resource_mgr_class = kwargs['support_classes']['resource_mgr'] |
| self.flow_mgr_class = kwargs['support_classes']['flow_mgr'] |
| self.alarm_mgr_class = kwargs['support_classes']['alarm_mgr'] |
| self.stats_mgr_class = kwargs['support_classes']['stats_mgr'] |
| self.bw_mgr_class = kwargs['support_classes']['bw_mgr'] |
| |
| self.seen_discovery_indications = [] |
| self.onu_cache = dict() |
| self.indication_retries = 0 |
| self.stub = None |
| self.connected = False |
| is_reconciliation = kwargs.get('reconciliation', False) |
| self.device_id = self.device.id |
| self.host_and_port = self.device.host_and_port |
| self.extra_args = self.device.extra_args |
| self.device_info = None |
| self.log = structlog.get_logger(id=self.device_id, |
| ip=self.host_and_port) |
| |
| self.log.info('openolt-device-init') |
| |
| # default device id and device serial number. If device_info provides better results, they will be updated |
| self.dpid = kwargs.get('dp_id') |
| self.serial_number = self.host_and_port # FIXME |
| |
| # Device already set in the event of reconciliation |
| if not is_reconciliation: |
| self.log.info('updating-device') |
| # It is a new device |
| # Update device |
| self.device.root = True |
| self.device.connect_status = ConnectStatus.UNREACHABLE |
| self.device.oper_status = OperStatus.ACTIVATING |
| |
| # Initialize the OLT state machine |
| self.machine = Machine(model=self, |
| states=OpenoltDevice.states, |
| transitions=OpenoltDevice.transitions, |
| send_event=True, |
| initial='state_null') |
| self.go_state_init() |
| |
| def stringToMacAddr(self, uri): |
| regex = re.compile('[^a-zA-Z]') |
| uri = regex.sub('', uri) |
| |
| l = len(uri) |
| if l > 6: |
| uri = uri[0:6] |
| else: |
| uri = uri + uri[0:6 - l] |
| |
| return ":".join([hex(ord(x))[-2:] for x in uri]) |
| |
| def do_state_init(self, event): |
| # Initialize gRPC |
| self.log.debug("grpc-host-port", self.host_and_port) |
| self.channel = grpc.insecure_channel(self.host_and_port) |
| self.channel_ready_future = grpc.channel_ready_future(self.channel) |
| |
| self.log.info('openolt-device-created', device_id=self.device_id) |
| |
| def post_init(self, event): |
| self.log.debug('post_init') |
| |
| # We have reached init state, starting the indications thread |
| |
| # Catch RuntimeError exception |
| try: |
| # Start indications thread |
| self.indications_thread_handle = threading.Thread( |
| target=self.indications_thread) |
| # Old getter/setter API for daemon; use it directly as a |
| # property instead. The Jinkins error will happon on the reason of |
| # Exception in thread Thread-1 (most likely raised # during |
| # interpreter shutdown) |
| self.log.debug('starting indications thread') |
| self.indications_thread_handle.setDaemon(True) |
| self.indications_thread_handle.start() |
| except Exception as e: |
| self.log.exception('post_init failed', e=e) |
| |
| @inlineCallbacks |
| def do_state_connected(self, event): |
| self.log.debug("do_state_connected") |
| |
| self.stub = openolt_pb2_grpc.OpenoltStub(self.channel) |
| |
| delay = 1 |
| while True: |
| try: |
| self.device_info = self.stub.GetDeviceInfo(openolt_pb2.Empty()) |
| break |
| except Exception as e: |
| reraise = True |
| if delay > 120: |
| self.log.error("gRPC failure too many times") |
| else: |
| self.log.warn("gRPC failure, retry in %ds: %s" % |
| (delay, repr(e))) |
| time.sleep(delay) |
| delay += delay |
| reraise = False |
| |
| if reraise: |
| raise |
| |
| self.log.info('Device connected', device_info=self.device_info) |
| |
| # TODO NEW CORE: logical device id is no longer available. use real device id for now |
| self.logical_device_id = self.device_id |
| dpid = self.device_info.device_id |
| serial_number = self.device_info.device_serial_number |
| |
| if dpid is None: dpid = self.dpid |
| if serial_number is None: serial_number = self.serial_number |
| |
| if dpid == None or dpid == '': |
| uri = self.host_and_port.split(":")[0] |
| try: |
| socket.inet_pton(socket.AF_INET, uri) |
| dpid = '00:00:' + self.ip_hex(uri) |
| except socket.error: |
| # this is not an IP |
| dpid = self.stringToMacAddr(uri) |
| |
| if serial_number == None or serial_number == '': |
| serial_number = self.host_and_port |
| |
| self.log.info('creating-openolt-device', |
| dp_id=dpid, |
| serial_number=serial_number) |
| |
| self.device.root = True |
| self.device.serial_number = serial_number |
| self.device.vendor = self.device_info.vendor |
| self.device.model = self.device_info.model |
| self.device.hardware_version = self.device_info.hardware_version |
| self.device.firmware_version = self.device_info.firmware_version |
| |
| # TODO: check for uptime and reboot if too long (VOL-1192) |
| |
| self.device.connect_status = ConnectStatus.REACHABLE |
| self.device.mac_address = dpid |
| yield self.core_proxy.device_update(self.device) |
| |
| self.resource_mgr = self.resource_mgr_class(self.device_id, |
| self.host_and_port, |
| self.extra_args, |
| self.device_info) |
| self.platform = self.platform_class(self.log, self.resource_mgr) |
| self.flow_mgr = self.flow_mgr_class(self.core_proxy, |
| self.adapter_proxy, self.log, |
| self.stub, self.device_id, |
| self.logical_device_id, |
| self.platform, self.resource_mgr) |
| |
| self.alarm_mgr = self.alarm_mgr_class(self.log, self.core_proxy, |
| self.device_id, |
| self.logical_device_id, |
| self.platform, |
| self.serial_number) |
| self.stats_mgr = self.stats_mgr_class(self, self.log, self.platform) |
| self.bw_mgr = self.bw_mgr_class(self.log, self.core_proxy) |
| |
| self.connected = True |
| |
| @inlineCallbacks |
| def do_state_up(self, event): |
| self.log.debug("do_state_up") |
| |
| yield self.core_proxy.device_state_update( |
| self.device_id, |
| connect_status=ConnectStatus.REACHABLE, |
| oper_status=OperStatus.ACTIVE) |
| self.log.debug("done_state_up") |
| |
| @inlineCallbacks |
| def do_state_down(self, event): |
| self.log.debug("do_state_down") |
| yield self.core_proxy.device_state_update( |
| self.device_id, |
| connect_status=ConnectStatus.UNREACHABLE, |
| oper_status=OperStatus.UNKNOWN) |
| self.log.debug("done_state_down") |
| |
| # def post_up(self, event): |
| # self.log.debug('post-up') |
| # self.flow_mgr.reseed_flows() |
| |
| def post_down(self, event): |
| self.log.debug('post_down') |
| self.flow_mgr.reset_flows() |
| |
| def indications_thread(self): |
| self.log.debug('starting-indications-thread') |
| self.log.debug('connecting to olt', device_id=self.device_id) |
| self.channel_ready_future.result() # blocking call |
| self.log.info('connected to olt', device_id=self.device_id) |
| self.go_state_connected() |
| |
| # TODO: thread timing issue. stub isnt ready yet from above go_state_connected (which doesnt block) |
| # Don't continue until connected is done |
| while (not self.connected): |
| time.sleep(0.5) |
| |
| self.indications = self.stub.EnableIndication(openolt_pb2.Empty()) |
| |
| while True: |
| try: |
| # get the next indication from olt |
| ind = next(self.indications) |
| except Exception as e: |
| self.log.warn('gRPC connection lost', error=e) |
| reactor.callFromThread(self.go_state_down) |
| reactor.callFromThread(self.go_state_init) |
| break |
| else: |
| self.log.debug("rx indication", indication=ind) |
| |
| # indication handlers run in the main event loop |
| if ind.HasField('olt_ind'): |
| reactor.callFromThread(self.olt_indication, ind.olt_ind) |
| elif ind.HasField('intf_ind'): |
| reactor.callFromThread(self.intf_indication, ind.intf_ind) |
| elif ind.HasField('intf_oper_ind'): |
| reactor.callFromThread(self.intf_oper_indication, |
| ind.intf_oper_ind) |
| elif ind.HasField('onu_disc_ind'): |
| reactor.callFromThread(self.onu_discovery_indication, |
| ind.onu_disc_ind) |
| elif ind.HasField('onu_ind'): |
| reactor.callFromThread(self.onu_indication, ind.onu_ind) |
| elif ind.HasField('omci_ind'): |
| reactor.callFromThread(self.omci_indication, ind.omci_ind) |
| elif ind.HasField('pkt_ind'): |
| reactor.callFromThread(self.packet_indication, ind.pkt_ind) |
| elif ind.HasField('port_stats'): |
| reactor.callFromThread( |
| self.stats_mgr.port_statistics_indication, |
| ind.port_stats) |
| elif ind.HasField('flow_stats'): |
| reactor.callFromThread( |
| self.stats_mgr.flow_statistics_indication, |
| ind.flow_stats) |
| elif ind.HasField('alarm_ind'): |
| reactor.callFromThread(self.alarm_mgr.process_alarms, |
| ind.alarm_ind) |
| else: |
| self.log.warn('unknown indication type') |
| |
| def olt_indication(self, olt_indication): |
| if olt_indication.oper_state == "up": |
| self.go_state_up() |
| elif olt_indication.oper_state == "down": |
| self.go_state_down() |
| |
| def intf_indication(self, intf_indication): |
| self.log.debug("intf indication", |
| intf_id=intf_indication.intf_id, |
| oper_state=intf_indication.oper_state) |
| |
| if intf_indication.oper_state == "up": |
| oper_status = OperStatus.ACTIVE |
| else: |
| oper_status = OperStatus.DISCOVERED |
| |
| # add_port update the port if it exists |
| self.add_port(intf_indication.intf_id, Port.PON_OLT, oper_status) |
| |
| def intf_oper_indication(self, intf_oper_indication): |
| self.log.debug("Received interface oper state change indication", |
| intf_id=intf_oper_indication.intf_id, |
| type=intf_oper_indication.type, |
| oper_state=intf_oper_indication.oper_state) |
| |
| if intf_oper_indication.oper_state == "up": |
| oper_state = OperStatus.ACTIVE |
| else: |
| oper_state = OperStatus.DISCOVERED |
| |
| if intf_oper_indication.type == "nni": |
| |
| # add_(logical_)port update the port if it exists |
| self.add_port(intf_oper_indication.intf_id, Port.ETHERNET_NNI, |
| oper_state) |
| |
| elif intf_oper_indication.type == "pon": |
| # FIXME - handle PON oper state change |
| pass |
| |
| @inlineCallbacks |
| def onu_discovery_indication(self, onu_disc_indication): |
| intf_id = onu_disc_indication.intf_id |
| serial_number = onu_disc_indication.serial_number |
| |
| serial_number_str = self.stringify_serial_number(serial_number) |
| |
| self.log.debug("onu discovery indication", |
| intf_id=intf_id, |
| serial_number=serial_number_str) |
| |
| if serial_number_str in self.seen_discovery_indications: |
| self.log.debug("skipping-seen-onu-discovery-indication", |
| intf_id=intf_id, |
| serial_number=serial_number_str) |
| return |
| else: |
| self.seen_discovery_indications.append(serial_number_str) |
| |
| self.indication_retries = 0 |
| # Post ONU Discover alarm 20180809_0805 |
| try: |
| OnuDiscoveryAlarm(self.alarm_mgr.alarms, |
| pon_id=intf_id, |
| serial_number=serial_number_str).raise_alarm() |
| except Exception as disc_alarm_error: |
| self.log.exception("onu-discovery-alarm-error", |
| errmsg=disc_alarm_error.message) |
| # continue for now. |
| |
| onu_device = yield self.core_proxy.get_child_device( |
| self.device_id, serial_number=serial_number_str) |
| |
| if onu_device is None: |
| try: |
| onu_id = self.resource_mgr.get_onu_id(intf_id) |
| if onu_id is None: |
| raise Exception("onu-id-unavailable") |
| |
| self.add_onu_device( |
| intf_id, |
| self.platform.intf_id_to_port_no(intf_id, Port.PON_OLT), |
| onu_id, serial_number) |
| self.activate_onu(intf_id, onu_id, serial_number, |
| serial_number_str) |
| except Exception as e: |
| self.log.exception('onu-activation-failed', e=e) |
| |
| else: |
| if onu_device.connect_status != ConnectStatus.REACHABLE: |
| yield self.core_proxy.device_state_update( |
| onu_device.id, connect_status=ConnectStatus.REACHABLE) |
| |
| onu_id = onu_device.proxy_address.onu_id |
| if onu_device.oper_status == OperStatus.DISCOVERED \ |
| or onu_device.oper_status == OperStatus.ACTIVATING: |
| self.log.debug("ignore onu discovery indication, \ |
| the onu has been discovered and should be \ |
| activating shorlty", |
| intf_id=intf_id, |
| onu_id=onu_id, |
| state=onu_device.oper_status) |
| elif onu_device.oper_status == OperStatus.ACTIVE: |
| self.log.warn("onu discovery indication whereas onu is \ |
| supposed to be active", |
| intf_id=intf_id, |
| onu_id=onu_id, |
| state=onu_device.oper_status) |
| elif onu_device.oper_status == OperStatus.UNKNOWN: |
| self.log.info("onu in unknown state, recovering from olt \ |
| reboot probably, activate onu", |
| intf_id=intf_id, |
| onu_id=onu_id, |
| serial_number=serial_number_str) |
| |
| yield self.core_proxy.device_state_update( |
| onu_device.id, oper_status=OperStatus.DISCOVERED) |
| |
| try: |
| self.activate_onu(intf_id, onu_id, serial_number, |
| serial_number_str) |
| except Exception as e: |
| self.log.error('onu-activation-error', |
| serial_number=serial_number_str, |
| error=e) |
| else: |
| self.log.warn('unexpected state', |
| onu_id=onu_id, |
| onu_device_oper_state=onu_device.oper_status) |
| |
| @inlineCallbacks |
| def onu_indication(self, onu_indication): |
| self.log.debug("onu indication with retry", |
| intf_id=onu_indication.intf_id, |
| onu_id=onu_indication.onu_id, |
| serial_number=onu_indication.serial_number, |
| oper_state=onu_indication.oper_state, |
| admin_state=onu_indication.admin_state) |
| try: |
| serial_number_str = self.stringify_serial_number( |
| onu_indication.serial_number) |
| except Exception as e: |
| serial_number_str = None |
| |
| if serial_number_str is not None: |
| onu_device = yield self.core_proxy.get_child_device( |
| self.device_id, serial_number=serial_number_str) |
| else: |
| onu_device = yield self.core_proxy.get_child_device( |
| self.device_id, |
| parent_port_no=self.platform.intf_id_to_port_no( |
| onu_indication.intf_id, Port.PON_OLT), |
| onu_id=onu_indication.onu_id) |
| |
| onu_key = self.form_onu_key(onu_indication.intf_id, |
| onu_indication.onu_id) |
| if onu_device is None: |
| if serial_number_str in self.seen_discovery_indications: |
| if onu_key not in self.onu_cache: |
| # The ONU is probably getting added. Lets retry again |
| if self.indication_retries < 10: |
| self.indication_retries += 1 |
| self.log.error( |
| 'onu in discovery indications but not found in core. Retrying again', |
| intf_id=onu_indication.intf_id, |
| onu_id=onu_indication.onu_id) |
| reactor.callLater(3, self.onu_indication, |
| onu_indication) |
| else: |
| self.log.error('ONU not found', |
| intf_id=onu_indication.intf_id, |
| onu_id=onu_indication.onu_id) |
| else: |
| # The ONU device is in the ONU cache |
| self.log.debug('ONU in cache') |
| self.indication_retries = 0 |
| onu_device = self.onu_cache[onu_key] |
| self.log.debug('ONU device found in the cache', onu_device=onu_device) |
| else: |
| self.log.error('onu not found', |
| intf_id=onu_indication.intf_id, |
| onu_id=onu_indication.onu_id) |
| if onu_device is None: |
| return |
| |
| self.onus[onu_key] = OnuDevice(onu_device.id, onu_device.type, |
| serial_number_str, |
| onu_indication.onu_id, |
| onu_indication.intf_id) |
| if self.platform.intf_id_from_pon_port_no(onu_device.parent_port_no) \ |
| != onu_indication.intf_id: |
| self.log.warn( |
| 'ONU-is-on-a-different-intf-id-now', |
| previous_intf_id=self.platform.intf_id_from_pon_port_no( |
| onu_device.parent_port_no), |
| current_intf_id=onu_indication.intf_id) |
| # FIXME - handle intf_id mismatch (ONU move?) |
| |
| if onu_device.proxy_address.onu_id != onu_indication.onu_id: |
| # FIXME - handle onu id mismatch |
| self.log.warn( |
| 'ONU-id-mismatch, can happen if both voltha and ' |
| 'the olt rebooted', |
| expected_onu_id=onu_device.proxy_address.onu_id, |
| received_onu_id=onu_indication.onu_id) |
| |
| # Admin state |
| if onu_indication.admin_state == 'down': |
| if onu_indication.oper_state != 'down': |
| self.log.error('ONU-admin-state-down-and-oper-status-not-down', |
| oper_state=onu_indication.oper_state) |
| # Forcing the oper state change code to execute |
| onu_indication.oper_state = 'down' |
| |
| # Port and logical port update is taken care of by oper state block |
| |
| elif onu_indication.admin_state == 'up': |
| pass |
| |
| else: |
| self.log.warn('Invalid-or-not-implemented-admin-state', |
| received_admin_state=onu_indication.admin_state) |
| |
| self.log.debug('admin-state-dealt-with') |
| |
| # Operating state |
| if onu_indication.oper_state == 'down': |
| |
| if onu_device.connect_status != ConnectStatus.UNREACHABLE: |
| yield self.core_proxy.device_state_update( |
| onu_device.id, connect_status=ConnectStatus.UNREACHABLE) |
| |
| # Move to discovered state |
| self.log.debug('onu-oper-state-is-down') |
| |
| if onu_device.oper_status != OperStatus.DISCOVERED: |
| yield self.core_proxy.device_state_update( |
| onu_device.id, oper_status=OperStatus.DISCOVERED) |
| |
| self.log.debug('inter-adapter-send-onu-ind', |
| onu_indication=onu_indication) |
| |
| # TODO NEW CORE do not hardcode adapter name. Handler needs Adapter reference |
| yield self.adapter_proxy.send_inter_adapter_message( |
| msg=onu_indication, |
| type=InterAdapterMessageType.ONU_IND_REQUEST, |
| from_adapter="openolt", |
| to_adapter=onu_device.type, |
| to_device_id=onu_device.id) |
| |
| elif onu_indication.oper_state == 'up': |
| |
| if onu_device.connect_status != ConnectStatus.REACHABLE: |
| yield self.core_proxy.device_state_update( |
| onu_device.id, connect_status=ConnectStatus.REACHABLE) |
| |
| if onu_device.oper_status != OperStatus.DISCOVERED: |
| if serial_number_str not in self.seen_discovery_indications: |
| self.log.debug("Ignore ONU indication", |
| intf_id=onu_indication.intf_id, |
| onu_id=onu_indication.onu_id, |
| state=onu_device.oper_status, |
| msg_oper_state=onu_indication.oper_state) |
| return |
| |
| self.log.debug('inter-adapter-send-onu-ind', |
| onu_indication=onu_indication) |
| |
| # TODO NEW CORE do not hardcode adapter name. Handler needs Adapter reference |
| yield self.adapter_proxy.send_inter_adapter_message( |
| msg=onu_indication, |
| type=InterAdapterMessageType.ONU_IND_REQUEST, |
| from_adapter="openolt", |
| to_adapter=onu_device.type, |
| to_device_id=onu_device.id) |
| |
| else: |
| self.log.warn('Not-implemented-or-invalid-value-of-oper-state', |
| oper_state=onu_indication.oper_state) |
| |
| @inlineCallbacks |
| def onu_ports_down(self, onu_device, oper_state): |
| pass |
| # Set port oper state to Discovered |
| # add port will update port if it exists |
| # yield self.core_proxy.add_port( |
| # self.device_id, |
| # Port( |
| # port_no=uni_no, |
| # label=uni_name, |
| # type=Port.ETHERNET_UNI, |
| # admin_state=onu_device.admin_state, |
| # oper_status=oper_state)) |
| # TODO this should be downning ports in onu adatper |
| |
| @inlineCallbacks |
| def omci_indication(self, omci_indication): |
| |
| self.log.debug("omci indication", |
| intf_id=omci_indication.intf_id, |
| onu_id=omci_indication.onu_id) |
| onu_in_cache = self.onus.get( |
| self.form_onu_key(omci_indication.intf_id, omci_indication.onu_id), |
| None) |
| if onu_in_cache is None: |
| self.log.debug('omci indication for a device not in cache.', |
| intf_id=omci_indication.intf_id, |
| onu_id=omci_indication.onu_id) |
| onu_device = yield self.core_proxy.get_child_device( |
| self.device_id, |
| onu_id=omci_indication.onu_id, |
| parent_port_no=self.platform.intf_id_to_port_no( |
| omci_indication.intf_id, Port.PON_OLT), |
| ) |
| onu_device_type = onu_device.type |
| onu_device_id = onu_device.id |
| try: |
| serial_number_str = self.stringify_serial_number( |
| omci_indication.serial_number) |
| except Exception as e: |
| serial_number_str = None |
| |
| #if not exist in cache, then add to cache. |
| onu_key = self.form_onu_key(omci_indication.intf_id, |
| omci_indication.onu_id) |
| self.onus[onu_key] = OnuDevice(onu_device.id, onu_device.type, |
| serial_number_str, |
| omci_indication.onu_id, |
| omci_indication.intf_id) |
| else: |
| onu_device_type = onu_in_cache.device_type |
| onu_device_id = onu_in_cache.device_id |
| |
| omci_msg = InterAdapterOmciMessage(message=omci_indication.pkt) |
| |
| self.log.debug('inter-adapter-send-omci', omci_msg=omci_msg) |
| |
| # TODO NEW CORE do not hardcode adapter name. Handler needs Adapter reference |
| yield self.adapter_proxy.send_inter_adapter_message( |
| msg=omci_msg, |
| type=InterAdapterMessageType.OMCI_REQUEST, |
| from_adapter="openolt", |
| to_adapter=onu_device_type, |
| to_device_id=onu_device_id) |
| |
| @inlineCallbacks |
| def packet_indication(self, pkt_indication): |
| |
| self.log.debug("packet indication", |
| intf_type=pkt_indication.intf_type, |
| intf_id=pkt_indication.intf_id, |
| port_no=pkt_indication.port_no, |
| cookie=pkt_indication.cookie, |
| gemport_id=pkt_indication.gemport_id, |
| flow_id=pkt_indication.flow_id) |
| |
| if pkt_indication.intf_type == "pon": |
| if pkt_indication.port_no: |
| port_num = pkt_indication.port_no |
| else: # TODO Remove this else block after openolt device has been fully rolled out with cookie protobuf change |
| try: |
| onu_id_uni_id = self.resource_mgr.get_onu_uni_from_ponport_gemport( |
| pkt_indication.intf_id, pkt_indication.gemport_id) |
| onu_id = int(onu_id_uni_id[0]) |
| uni_id = int(onu_id_uni_id[1]) |
| self.log.debug("packet indication-kv", |
| onu_id=onu_id, |
| uni_id=uni_id) |
| if onu_id is None: |
| raise Exception("onu-id-none") |
| if uni_id is None: |
| raise Exception("uni-id-none") |
| port_num = self.platform.mk_uni_port_num( |
| pkt_indication.intf_id, onu_id, uni_id) |
| except Exception as e: |
| self.log.error("no-onu-reference-for-gem", |
| gemport_id=pkt_indication.gemport_id, |
| e=e) |
| return |
| |
| elif pkt_indication.intf_type == "nni": |
| port_num = self.platform.intf_id_to_port_no( |
| pkt_indication.intf_id, Port.ETHERNET_NNI) |
| |
| pkt = Ether(pkt_indication.pkt) |
| |
| self.log.debug("packet indication", |
| device_id=self.device_id, |
| port_num=port_num) |
| |
| yield self.core_proxy.send_packet_in(device_id=self.device_id, |
| port=port_num, |
| packet=str(pkt)) |
| |
| def packet_out(self, egress_port, msg): |
| pkt = Ether(msg) |
| self.log.debug('packet out', |
| egress_port=egress_port, |
| device_id=self.device_id, |
| packet=str(pkt).encode("HEX")) |
| |
| # Find port type |
| egress_port_type = self.platform.intf_id_to_port_type_name(egress_port) |
| if egress_port_type == Port.ETHERNET_UNI: |
| |
| if pkt.haslayer(Dot1Q): |
| outer_shim = pkt.getlayer(Dot1Q) |
| if isinstance(outer_shim.payload, Dot1Q): |
| # If double tag, remove the outer tag |
| payload = ( |
| Ether(src=pkt.src, dst=pkt.dst, type=outer_shim.type) / |
| outer_shim.payload) |
| else: |
| payload = pkt |
| else: |
| payload = pkt |
| |
| send_pkt = binascii.unhexlify(str(payload).encode("HEX")) |
| |
| self.log.debug( |
| 'sending-packet-to-ONU', |
| egress_port=egress_port, |
| intf_id=self.platform.intf_id_from_uni_port_num(egress_port), |
| onu_id=self.platform.onu_id_from_port_num(egress_port), |
| uni_id=self.platform.uni_id_from_port_num(egress_port), |
| port_no=egress_port, |
| packet=str(payload).encode("HEX")) |
| |
| onu_pkt = openolt_pb2.OnuPacket( |
| intf_id=self.platform.intf_id_from_uni_port_num(egress_port), |
| onu_id=self.platform.onu_id_from_port_num(egress_port), |
| port_no=egress_port, |
| pkt=send_pkt) |
| |
| self.stub.OnuPacketOut(onu_pkt) |
| |
| elif egress_port_type == Port.ETHERNET_NNI: |
| self.log.debug('sending-packet-to-uplink', |
| egress_port=egress_port, |
| packet=str(pkt).encode("HEX")) |
| |
| send_pkt = binascii.unhexlify(str(pkt).encode("HEX")) |
| |
| uplink_pkt = openolt_pb2.UplinkPacket( |
| intf_id=self.platform.intf_id_from_nni_port_num(egress_port), |
| pkt=send_pkt) |
| |
| self.stub.UplinkPacketOut(uplink_pkt) |
| |
| else: |
| self.log.warn('Packet-out-to-this-interface-type-not-implemented', |
| egress_port=egress_port, |
| port_type=egress_port_type) |
| |
| def process_inter_adapter_message(self, request): |
| self.log.debug('process-inter-adapter-message', msg=request) |
| try: |
| if request.header.type == InterAdapterMessageType.OMCI_REQUEST: |
| omci_msg = InterAdapterOmciMessage() |
| request.body.Unpack(omci_msg) |
| self.log.debug('inter-adapter-recv-omci', omci_msg=omci_msg) |
| |
| #onu_device_id = request.header.to_device_id |
| #onu_device = yield self.core_proxy.get_device(onu_device_id) |
| self.send_proxied_message(omci_msg) |
| |
| else: |
| self.log.error("inter-adapter-unhandled-type", request=request) |
| |
| except Exception as e: |
| self.log.exception("error-processing-inter-adapter-message", e=e) |
| |
| def send_proxied_message(self, omci_msg): |
| |
| if omci_msg.connect_status != ConnectStatus.REACHABLE: |
| self.log.debug('ONU is not reachable, cannot send OMCI', |
| intf_id=omci_msg.proxy_address.channel_id, |
| onu_id=omci_msg.proxy_address.onu_id) |
| return |
| |
| omci = openolt_pb2.OmciMsg(intf_id=omci_msg.proxy_address.channel_id, |
| onu_id=omci_msg.proxy_address.onu_id, |
| pkt=str(omci_msg.message)) |
| self.stub.OmciMsgOut(omci) |
| |
| self.log.debug("omci-message-sent", |
| intf_id=omci_msg.proxy_address.channel_id, |
| onu_id=omci_msg.proxy_address.onu_id, |
| pkt=str(omci_msg.message)) |
| |
| @inlineCallbacks |
| def add_onu_device(self, intf_id, port_no, onu_id, serial_number): |
| self.log.info("adding-onu", |
| port_no=port_no, |
| onu_id=onu_id, |
| serial_number=serial_number) |
| |
| serial_number_str = self.stringify_serial_number(serial_number) |
| |
| # TODO NEW CORE dont hardcode child device type. find some way of determining by vendor in serial number |
| onu_device = yield self.core_proxy.child_device_detected( |
| parent_device_id=self.device_id, |
| parent_port_no=port_no, |
| child_device_type='brcm_openomci_onu', |
| channel_id=intf_id, |
| vendor_id=serial_number.vendor_id, |
| serial_number=serial_number_str, |
| onu_id=onu_id) |
| |
| self.log.debug("onu-added", |
| onu_id=onu_id, |
| port_no=port_no, |
| serial_number=serial_number_str) |
| |
| yield self.core_proxy.device_state_update( |
| onu_device.id, |
| oper_status=OperStatus.DISCOVERED, |
| connect_status=ConnectStatus.REACHABLE) |
| |
| self.log.debug("set-onu-discovered", |
| onu_id=onu_id, |
| port_no=port_no, |
| serial_number=serial_number_str, |
| onu_device=onu_device) |
| |
| self.log.debug('Adding ONU device to the cache', |
| intf_id=intf_id, |
| onu_id=onu_id) |
| onu_key = self.form_onu_key(intf_id, onu_id) |
| self.onu_cache[onu_key] = onu_device |
| return |
| |
| def get_ofp_device_info(self, device): |
| self.log.info('get_ofp_device_info', device_id=device.id) |
| |
| mfr_desc = self.device_info.vendor |
| sw_desc = self.device_info.firmware_version |
| hw_desc = self.device_info.model |
| if self.device_info.hardware_version: |
| hw_desc += '-' + self.device_info.hardware_version |
| |
| return SwitchCapability( |
| desc=ofp_desc(hw_desc=hw_desc, |
| sw_desc=sw_desc, |
| serial_num=device.serial_number), |
| switch_features=ofp_switch_features( |
| n_buffers= |
| 256, # Max packets buffered at once # TODO fake for now |
| n_tables= |
| 2, # Number of tables supported by datapath # TODO fake for now |
| capabilities= |
| ( #Bitmap of support "ofp_capabilities" # TODO fake for now |
| OFPC_FLOW_STATS |
| | OFPC_TABLE_STATS |
| | OFPC_PORT_STATS |
| | OFPC_GROUP_STATS))) |
| |
| def get_ofp_port_info(self, device, port_no): |
| self.log.info('get_ofp_port_info', |
| port_no=port_no, |
| device_id=device.id) |
| cap = OFPPF_1GB_FD | OFPPF_FIBER |
| return PortCapability(port=LogicalPort(ofp_port=ofp_port( |
| hw_addr=mac_str_to_tuple(self._get_mac_form_port_no(port_no)), |
| config=0, |
| state=OFPPS_LIVE, |
| curr=cap, |
| advertised=cap, |
| peer=cap, |
| curr_speed=OFPPF_1GB_FD, |
| max_speed=OFPPF_1GB_FD), |
| device_id=device.id, |
| device_port_no=port_no)) |
| |
| def port_name(self, port_no, port_type, intf_id=None, serial_number=None): |
| if port_type is Port.ETHERNET_NNI: |
| return "nni-" + str(port_no) |
| elif port_type is Port.PON_OLT: |
| return "pon" + str(intf_id) |
| elif port_type is Port.ETHERNET_UNI: |
| assert False, 'local UNI management not supported' |
| |
| def _get_mac_form_port_no(self, port_no): |
| mac = '' |
| for i in range(4): |
| mac = ':%02x' % ((port_no >> (i * 8)) & 0xff) + mac |
| return '00:00' + mac |
| |
| @inlineCallbacks |
| def add_port(self, intf_id, port_type, oper_status): |
| port_no = self.platform.intf_id_to_port_no(intf_id, port_type) |
| |
| label = self.port_name(port_no, port_type, intf_id) |
| |
| self.log.debug('adding-port', |
| port_no=port_no, |
| label=label, |
| port_type=port_type) |
| |
| port = Port(port_no=port_no, |
| label=label, |
| type=port_type, |
| admin_state=AdminState.ENABLED, |
| oper_status=oper_status) |
| |
| yield self.core_proxy.port_created(self.device_id, port) |
| |
| @inlineCallbacks |
| def delete_port(self, child_serial_number): |
| ports = self.proxy.get('/devices/{}/ports'.format(self.device_id)) |
| for port in ports: |
| if port.label == child_serial_number: |
| self.log.debug('delete-port', |
| onu_serial_number=child_serial_number, |
| port=port) |
| yield self.core_proxy.port_removed(self.device_id, port) |
| return |
| |
| def update_flow_table(self, flow_changes): |
| |
| self.log.debug("update_flow_table", flow_changes=flow_changes) |
| |
| flows_to_add = flow_changes.to_add.items |
| flows_to_remove = flow_changes.to_remove.items |
| |
| if not self.is_state_up(): |
| self.log.info('The OLT is not up, we cannot update flows', |
| flows_to_add=[f.id for f in flows_to_add], |
| flows_to_remove=[f.id for f in flows_to_remove]) |
| return |
| |
| self.log.debug('flows update', |
| flows_to_add=flows_to_add, |
| flows_to_remove=flows_to_remove) |
| |
| for flow in flows_to_add: |
| |
| try: |
| self.flow_mgr.add_flow(flow) |
| except Exception as e: |
| self.log.error('failed to add flow', flow=flow, e=e) |
| |
| for flow in flows_to_remove: |
| |
| try: |
| self.flow_mgr.remove_flow(flow) |
| except Exception as e: |
| self.log.error('failed to remove flow', flow=flow, e=e) |
| |
| # TODO NEW CORE: Core keeps track of logical flows. no need to keep track. verify, especially olt reboot! |
| #self.flow_mgr.repush_all_different_flows() |
| |
| # There has to be a better way to do this |
| def ip_hex(self, ip): |
| octets = ip.split(".") |
| hex_ip = [] |
| for octet in octets: |
| octet_hex = hex(int(octet)) |
| octet_hex = octet_hex.split('0x')[1] |
| octet_hex = octet_hex.rjust(2, '0') |
| hex_ip.append(octet_hex) |
| return ":".join(hex_ip) |
| |
| def stringify_vendor_specific(self, vendor_specific): |
| return ''.join( |
| str(i) for i in [ |
| hex(ord(vendor_specific[0]) >> 4 & 0x0f)[2:], |
| hex(ord(vendor_specific[0]) & 0x0f)[2:], |
| hex(ord(vendor_specific[1]) >> 4 & 0x0f)[2:], |
| hex(ord(vendor_specific[1]) & 0x0f)[2:], |
| hex(ord(vendor_specific[2]) >> 4 & 0x0f)[2:], |
| hex(ord(vendor_specific[2]) & 0x0f)[2:], |
| hex(ord(vendor_specific[3]) >> 4 & 0x0f)[2:], |
| hex(ord(vendor_specific[3]) & 0x0f)[2:] |
| ]) |
| |
| def stringify_serial_number(self, serial_number): |
| return ''.join([ |
| serial_number.vendor_id, |
| self.stringify_vendor_specific(serial_number.vendor_specific) |
| ]) |
| |
| def destringify_serial_number(self, serial_number_str): |
| serial_number = openolt_pb2.SerialNumber( |
| vendor_id=serial_number_str[:4].encode('utf-8'), |
| vendor_specific=binascii.unhexlify(serial_number_str[4:])) |
| return serial_number |
| |
| def disable(self): |
| self.log.debug('sending-deactivate-olt-message', |
| device_id=self.device_id) |
| |
| try: |
| # Send grpc call |
| self.stub.DisableOlt(openolt_pb2.Empty()) |
| # The resulting indication will bring the OLT down |
| # self.go_state_down() |
| self.log.info('openolt device disabled') |
| except Exception as e: |
| self.log.error('Failure to disable openolt device', error=e) |
| |
| def delete(self): |
| self.log.info('deleting-olt', device_id=self.device_id) |
| |
| # Clears up the data from the resource manager KV store |
| # for the device |
| del self.resource_mgr |
| |
| try: |
| # Rebooting to reset the state |
| self.reboot() |
| # Removing logical device |
| except Exception as e: |
| self.log.error('Failure to delete openolt device', error=e) |
| raise e |
| else: |
| self.log.info('successfully-deleted-olt', device_id=self.device_id) |
| |
| def reenable(self): |
| self.log.debug('reenabling-olt', device_id=self.device_id) |
| |
| try: |
| self.stub.ReenableOlt(openolt_pb2.Empty()) |
| |
| except Exception as e: |
| self.log.error('Failure to reenable openolt device', error=e) |
| else: |
| self.log.info('openolt device reenabled') |
| |
| def activate_onu(self, intf_id, onu_id, serial_number, serial_number_str): |
| pir = self.bw_mgr.pir(serial_number_str) |
| self.log.debug("activating-onu", |
| intf_id=intf_id, |
| onu_id=onu_id, |
| serial_number_str=serial_number_str, |
| serial_number=serial_number, |
| pir=pir) |
| onu = openolt_pb2.Onu(intf_id=intf_id, |
| onu_id=onu_id, |
| serial_number=serial_number, |
| pir=pir) |
| self.stub.ActivateOnu(onu) |
| self.log.info('onu-activated', serial_number=serial_number_str) |
| |
| @inlineCallbacks |
| def delete_child_device(self, child_device): |
| self.log.debug('sending-deactivate-onu', |
| olt_device_id=self.device_id, |
| onu_device=child_device, |
| onu_serial_number=child_device.serial_number) |
| try: |
| yield self.core_proxy.child_device_removed(self.device_id, |
| child_device.id, |
| child_device) |
| except Exception as e: |
| self.log.error('core_proxy error', error=e) |
| try: |
| self.delete_logical_port(child_device) |
| except Exception as e: |
| self.log.error('logical_port delete error', error=e) |
| try: |
| self.delete_port(child_device.serial_number) |
| except Exception as e: |
| self.log.error('port delete error', error=e) |
| serial_number = self.destringify_serial_number( |
| child_device.serial_number) |
| # TODO FIXME - For each uni. |
| # TODO FIXME - Flows are not deleted |
| uni_id = 0 # FIXME |
| self.flow_mgr.delete_tech_profile_instance( |
| child_device.proxy_address.channel_id, |
| child_device.proxy_address.onu_id, uni_id) |
| pon_intf_id_onu_id = (child_device.proxy_address.channel_id, |
| child_device.proxy_address.onu_id, uni_id) |
| # Free any PON resources that were reserved for the ONU |
| self.resource_mgr.free_pon_resources_for_onu(pon_intf_id_onu_id) |
| |
| onu = openolt_pb2.Onu(intf_id=child_device.proxy_address.channel_id, |
| onu_id=child_device.proxy_address.onu_id, |
| serial_number=serial_number) |
| self.stub.DeleteOnu(onu) |
| |
| def reboot(self): |
| self.log.debug('rebooting openolt device', device_id=self.device_id) |
| try: |
| self.stub.Reboot(openolt_pb2.Empty()) |
| except Exception as e: |
| self.log.error('something went wrong with the reboot', error=e) |
| else: |
| self.log.info('device rebooted') |
| |
| def trigger_statistics_collection(self): |
| try: |
| self.stub.CollectStatistics(openolt_pb2.Empty()) |
| except Exception as e: |
| self.log.error('Error while triggering statistics collection', |
| error=e) |
| else: |
| self.log.info('statistics requested') |
| |
| def simulate_alarm(self, alarm): |
| self.alarm_mgr.simulate_alarm(alarm) |
| |
| def form_onu_key(self, intf_id, onu_id): |
| return str(intf_id) + "." + str(onu_id) |
| |
| |
| class OnuDevice(object): |
| def __init__(self, device_id, device_type, serialnumber, onu_id, intf_id): |
| self.device_id = device_id |
| self.device_type = device_type |
| self.serialnumber = serialnumber |
| self.onu_id = onu_id |
| self.intf_id = intf_id |