blob: 803a132030684293fe9dabbcfa5d3fda3248821f [file] [log] [blame]
#
# Copyright 2018 the original author or authors.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
ifneq ($(VOLTHA_BUILD),docker)
ifeq ($(VOLTHA_BASE)_set,_set)
$(error To get started, please source the env.sh file)
endif
endif
ifeq ($(TAG),)
TAG := latest
endif
ifeq ($(TARGET_TAG),)
TARGET_TAG := latest
endif
# If no DOCKER_HOST_IP is specified grab a v4 IP address associated with
# the default gateway
ifeq ($(DOCKER_HOST_IP),)
DOCKER_HOST_IP := $(shell ifconfig $$(netstat -rn | grep -E '^(default|0.0.0.0)' | head -1 | awk '{print $$NF}') | grep inet | awk '{print $$2}' | sed -e 's/addr://g')
endif
ifneq ($(http_proxy)$(https_proxy),)
# Include proxies from the environment
DOCKER_PROXY_ARGS = \
--build-arg http_proxy=$(http_proxy) \
--build-arg https_proxy=$(https_proxy) \
--build-arg ftp_proxy=$(ftp_proxy) \
--build-arg no_proxy=$(no_proxy) \
--build-arg HTTP_PROXY=$(HTTP_PROXY) \
--build-arg HTTPS_PROXY=$(HTTPS_PROXY) \
--build-arg FTP_PROXY=$(FTP_PROXY) \
--build-arg NO_PROXY=$(NO_PROXY)
endif
DOCKER_BUILD_ARGS = \
--build-arg TAG=$(TAG) \
--build-arg REGISTRY=$(REGISTRY) \
--build-arg REPOSITORY=$(REPOSITORY) \
$(DOCKER_PROXY_ARGS) $(DOCKER_CACHE_ARG) \
--rm --force-rm \
$(DOCKER_BUILD_EXTRA_ARGS)
VENVDIR := venv-$(shell uname -s | tr '[:upper:]' '[:lower:]')
DOCKER_IMAGE_LIST = \
openolt-protos \
openolt-adapter \
# The following list was scavanged from the compose / stack files as well as
# from the Dockerfiles. If nothing else it highlights that VOLTHA is not
# using consistent versions for some of the containers.
FETCH_COMPOSE_IMAGE_LIST = \
wurstmeister/kafka:latest \
wurstmeister/zookeeper:latest
# find k8s -type f | xargs grep image: | awk '{print $NF}' | sed -e 's/\"//g' | sed '/:.*$/!s/$/:latest/g' | sort -u | sed -e 's/^/ /g' -e 's/$/ \\/g'
# Manually remove some image from this list as they don't reflect the new
# naming conventions for the VOLTHA build
FETCH_K8S_IMAGE_LIST = \
wurstmeister/kafka:1.0.0 \
zookeeper:3.4.11
FETCH_IMAGE_LIST = $(shell echo $(FETCH_BUILD_IMAGE_LIST) $(FETCH_COMPOSE_IMAGE_LIST) $(FETCH_K8S_IMAGE_LIST) | tr ' ' '\n' | sort -u)
.PHONY: $(DIRS) $(DIRS_CLEAN) $(DIRS_FLAKE8) flake8 base openolt ofagent kafka common start stop tag push pull
# This should to be the first and default target in this Makefile
help:
@echo "Usage: make [<target>]"
@echo "where available targets are:"
@echo
@echo "build : Build the Adapters protos and docker images.\n\
If this is the first time you are building, choose \"make build\" option."
@echo "clean : Remove files created by the build and tests"
@echo "distclean : Remove venv directory"
@echo "fetch : Pre-fetch artifacts for subsequent local builds"
@echo "help : Print this help"
@echo "protoc : Build a container with protoc installed"
@echo "protos : Compile all grpc/protobuf files"
@echo "rebuild-venv : Rebuild local Python virtualenv from scratch"
@echo "venv : Build local Python virtualenv if did not exist yet"
@echo "containers : Build all the docker containers"
@echo "base : Build the base docker container used by all other dockers"
@echo "tag : Tag a set of images"
@echo "push : Push the docker images to an external repository"
@echo "pull : Pull the docker images from a repository"
@echo
## New directories can be added here
#DIRS:=
## If one directory depends on another directory that
## dependency can be expressed here
##
## For example, if the Tibit directory depended on the eoam
## directory being built first, then that can be expressed here.
## driver/tibit: eoam
# Parallel Build
$(DIRS):
@echo " MK $@"
$(Q)$(MAKE) -C $@
# Parallel Clean
DIRS_CLEAN = $(addsuffix .clean,$(DIRS))
$(DIRS_CLEAN):
@echo " CLEAN $(basename $@)"
$(Q)$(MAKE) -C $(basename $@) clean
# Parallel Flake8
DIRS_FLAKE8 = $(addsuffix .flake8,$(DIRS))
$(DIRS_FLAKE8):
@echo " FLAKE8 $(basename $@)"
-$(Q)$(MAKE) -C $(basename $@) flake8
build: containers
containers: base adapter_openolt
base:
ifdef LOCAL_PYVOLTHA
mkdir -p pyvoltha/dist
cp ../../pyvoltha/dist/*.tar.gz pyvoltha/dist/
docker build $(DOCKER_BUILD_ARGS) -t ${REGISTRY}${REPOSITORY}voltha-openolt-adapter-base:${TAG} -f docker/Dockerfile.base_local .
else
docker build $(DOCKER_BUILD_ARGS) -t ${REGISTRY}${REPOSITORY}voltha-openonu-adapter-base:${TAG} -f docker/Dockerfile.base .
endif
adapter_openolt:
docker build $(DOCKER_BUILD_ARGS) -t ${REGISTRY}${REPOSITORY}voltha-openolt-adapter:${TAG} -f docker/Dockerfile.openolt_adapter .
tag: $(patsubst %,%.tag,$(DOCKER_IMAGE_LIST))
push: tag $(patsubst %,%.push,$(DOCKER_IMAGE_LIST))
pull: $(patsubst %,%.pull,$(DOCKER_IMAGE_LIST))
%.tag:
docker tag ${REGISTRY}${REPOSITORY}voltha-$(subst .tag,,$@):${TAG} ${TARGET_REGISTRY}${TARGET_REPOSITORY}voltha-$(subst .tag,,$@):${TARGET_TAG}
%.push:
docker push ${TARGET_REGISTRY}${TARGET_REPOSITORY}voltha-$(subst .push,,$@):${TARGET_TAG}
%.pull:
docker pull ${REGISTRY}${REPOSITORY}voltha-$(subst .pull,,$@):${TAG}
openolt_protos:
ifneq ($(VOLTHA_BUILD),docker)
make -C protos
else
docker build $(DOCKER_BUILD_ARGS) -t ${REGISTRY}${REPOSITORY}voltha-openolt-protos:${TAG} -f docker/Dockerfile.openolt_protos .
endif
install-protoc:
make -C voltha/protos install-protoc
clean:
rm -r pyvoltha
find . -name '*.pyc' | xargs rm -f
distclean: clean
rm -rf ${VENVDIR}
fetch:
@bash -c ' \
for i in $(FETCH_IMAGE_LIST); do \
docker pull $$i; \
done'
purge-venv:
rm -fr ${VENVDIR}
rebuild-venv: purge-venv venv
ifneq ($(VOLTHA_BUILD),docker)
venv: ${VENVDIR}/.built
else
venv:
endif
${VENVDIR}/.built:
@ virtualenv ${VENVDIR}
@ . ${VENVDIR}/bin/activate && \
pip install --upgrade pip; \
if ! pip install -r requirements.txt; \
then \
echo "On MAC OS X, if the installation failed with an error \n'<openssl/opensslv.h>': file not found,"; \
echo "see the BUILD.md file for a workaround"; \
else \
uname -s > ${VENVDIR}/.built; \
fi
ifdef LOCAL_PYVOLTHA
mkdir -p pyvoltha/dist
cp ../../pyvoltha/dist/*.tar.gz pyvoltha/dist/
@ . ${VENVDIR}/bin/activate && \
pip install pyvoltha/dist/*.tar.gz
endif
flake8: $(DIRS_FLAKE8)
# end file