| # |
| # Copyright 2018 the original author or authors. |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| |
| from twisted.internet import reactor, defer |
| from pyvoltha.adapters.extensions.kpi.olt.olt_pm_metrics import OltPmMetrics |
| from voltha_protos.device_pb2 import PmConfig, PmConfigs, PmGroupConfig, Port |
| |
| |
| class OpenOltStatisticsMgr(object): |
| def __init__(self, openolt_device, log, platform, **kargs): |
| |
| """ |
| kargs are used to pass debugging flags at this time. |
| :param openolt_device: |
| :param log: |
| :param kargs: |
| """ |
| self.device = openolt_device |
| self.log = log |
| self.platform = platform |
| # Northbound and Southbound ports |
| # added to initialize the pm_metrics |
| self.northbound_ports = self.init_ports(type="nni") |
| self.southbound_ports = self.init_ports(type='pon') |
| |
| self.pm_metrics = None |
| # The following can be used to allow a standalone test routine to start |
| # the metrics independently |
| self.metrics_init = kargs.pop("metrics_init", True) |
| if self.metrics_init == True: |
| self.init_pm_metrics() |
| |
| def init_pm_metrics(self): |
| # Setup PM configuration for this device |
| if self.pm_metrics is None: |
| try: |
| self.device.reason = 'setting up Performance Monitoring configuration' |
| kwargs = { |
| 'nni-ports': self.northbound_ports.values(), |
| 'pon-ports': self.southbound_ports.values() |
| } |
| self.pm_metrics = OltPmMetrics(self.device.core_proxy, self.device.device_id, |
| self.device.logical_device_id, |
| grouped=True, freq_override=False, |
| **kwargs) |
| """ |
| override the default naming structures in the OltPmMetrics class. |
| This is being done until the protos can be modified in the BAL driver |
| |
| """ |
| self.pm_metrics.nni_pm_names = (self.get_openolt_port_pm_names())['nni_pm_names'] |
| self.pm_metrics.nni_metrics_config = {m: PmConfig(name=m, type=t, enabled=True) |
| for (m, t) in self.pm_metrics.nni_pm_names} |
| |
| self.pm_metrics.pon_pm_names = (self.get_openolt_port_pm_names())['pon_pm_names'] |
| self.pm_metrics.pon_metrics_config = {m: PmConfig(name=m, type=t, enabled=True) |
| for (m, t) in self.pm_metrics.pon_pm_names} |
| pm_config = self.pm_metrics.make_proto() |
| self.log.info("initial-pm-config", pm_config=pm_config) |
| self.device.core_proxy.device_pm_config_update(pm_config, init=True) |
| # Start collecting stats from the device after a brief pause |
| reactor.callLater(10, self.pm_metrics.start_collector) |
| except Exception as e: |
| self.log.exception('pm-setup', e=e) |
| |
| def port_statistics_indication(self, port_stats): |
| # self.log.info('port-stats-collected', stats=port_stats) |
| self.ports_statistics_kpis(port_stats) |
| #FIXME: etcd problem, do not update objects for now |
| |
| # |
| # |
| # #FIXME : only the first uplink is a logical port |
| # if platform.intf_id_to_port_type_name(port_stats.intf_id) == |
| # Port.ETHERNET_NNI: |
| # # ONOS update |
| # self.update_logical_port_stats(port_stats) |
| # # update port object stats |
| # port = self.device.adapter_agent.get_port(self.device.device_id, |
| # port_no=port_stats.intf_id) |
| # |
| # if port is None: |
| # self.log.warn('port associated with this stats does not exist') |
| # return |
| # |
| # port.rx_packets = port_stats.rx_packets |
| # port.rx_bytes = port_stats.rx_bytes |
| # port.rx_errors = port_stats.rx_error_packets |
| # port.tx_packets = port_stats.tx_packets |
| # port.tx_bytes = port_stats.tx_bytes |
| # port.tx_errors = port_stats.tx_error_packets |
| # |
| # # Add port does an update if port exists |
| # self.device.adapter_agent.add_port(self.device.device_id, port) |
| |
| def flow_statistics_indication(self, flow_stats): |
| self.log.info('flow-stats-collected', stats=flow_stats) |
| # TODO: send to kafka ? |
| # FIXME: etcd problem, do not update objects for now |
| # # UNTESTED : the openolt driver does not yet provide flow stats |
| # self.device.adapter_agent.update_flow_stats( |
| # self.device.logical_device_id, |
| # flow_id=flow_stats.flow_id, packet_count=flow_stats.tx_packets, |
| # byte_count=flow_stats.tx_bytes) |
| |
| def ports_statistics_kpis(self, port_stats): |
| """ |
| map the port stats values into a dictionary |
| Create a kpoEvent and publish to Kafka |
| |
| :param port_stats: |
| :return: |
| """ |
| |
| try: |
| intf_id = port_stats.intf_id |
| |
| if self.platform.intf_id_to_port_no(0, Port.ETHERNET_NNI) < intf_id < \ |
| self.platform.intf_id_to_port_no(4, Port.ETHERNET_NNI) : |
| """ |
| for this release we are only interested in the first NNI for |
| Northbound. |
| we are not using the other 3 |
| """ |
| return |
| else: |
| |
| pm_data = {} |
| pm_data["rx_bytes"] = port_stats.rx_bytes |
| pm_data["rx_packets"] = port_stats.rx_packets |
| pm_data["rx_ucast_packets"] = port_stats.rx_ucast_packets |
| pm_data["rx_mcast_packets"] = port_stats.rx_mcast_packets |
| pm_data["rx_bcast_packets"] = port_stats.rx_bcast_packets |
| pm_data["rx_error_packets"] = port_stats.rx_error_packets |
| pm_data["tx_bytes"] = port_stats.tx_bytes |
| pm_data["tx_packets"] = port_stats.tx_packets |
| pm_data["tx_ucast_packets"] = port_stats.tx_ucast_packets |
| pm_data["tx_mcast_packets"] = port_stats.tx_mcast_packets |
| pm_data["tx_bcast_packets"] = port_stats.tx_bcast_packets |
| pm_data["tx_error_packets"] = port_stats.tx_error_packets |
| pm_data["rx_crc_errors"] = port_stats.rx_crc_errors |
| pm_data["bip_errors"] = port_stats.bip_errors |
| |
| pm_data["intf_id"] = intf_id |
| |
| """ |
| Based upon the intf_id map to an nni port or a pon port |
| the intf_id is the key to the north or south bound collections |
| |
| Based upon the intf_id the port object (nni_port or pon_port) will |
| have its data attr. updated by the current dataset collected. |
| |
| For prefixing the rule is currently to use the port number and not the intf_id |
| |
| """ |
| #FIXME : Just use first NNI for now |
| if intf_id == self.platform.intf_id_to_port_no(0, |
| Port.ETHERNET_NNI): |
| #NNI port (just the first one) |
| self.update_port_object_kpi_data( |
| port_object=self.northbound_ports[port_stats.intf_id], datadict=pm_data) |
| else: |
| #PON ports |
| self.update_port_object_kpi_data( |
| port_object=self.southbound_ports[port_stats.intf_id],datadict=pm_data) |
| except Exception as err: |
| self.log.exception("Error publishing kpi statistics. ", errmessage=err) |
| |
| def update_logical_port_stats(self, port_stats): |
| try: |
| label = 'nni-{}'.format(port_stats.intf_id) |
| logical_port = self.device.adapter_agent.get_logical_port( |
| self.device.logical_device_id, label) |
| except KeyError as e: |
| self.log.warn('logical port was not found, it may not have been ' |
| 'created yet', exception=e) |
| return |
| |
| if logical_port is None: |
| self.log.error('logical-port-is-None', |
| logical_device_id=self.device.logical_device_id, label=label, |
| port_stats=port_stats) |
| return |
| |
| logical_port.ofp_port_stats.rx_packets = port_stats.rx_packets |
| logical_port.ofp_port_stats.rx_bytes = port_stats.rx_bytes |
| logical_port.ofp_port_stats.tx_packets = port_stats.tx_packets |
| logical_port.ofp_port_stats.tx_bytes = port_stats.tx_bytes |
| logical_port.ofp_port_stats.rx_errors = port_stats.rx_error_packets |
| logical_port.ofp_port_stats.tx_errors = port_stats.tx_error_packets |
| logical_port.ofp_port_stats.rx_crc_err = port_stats.rx_crc_errors |
| |
| self.log.debug('after-stats-update', port=logical_port) |
| |
| self.device.adapter_agent.update_logical_port( |
| self.device.logical_device_id, logical_port) |
| |
| """ |
| The following 4 methods customer naming, the generation of the port objects, building of those |
| objects and populating new data. The pm metrics operate on the value that are contained in the Port objects. |
| This class updates those port objects with the current data from the grpc indication and |
| post the data on a fixed interval. |
| |
| """ |
| def get_openolt_port_pm_names(self): |
| """ |
| This collects a dictionary of the custom port names |
| used by the openolt. |
| |
| Some of these are the same as the pm names used by the olt_pm_metrics class |
| if the set is the same then there is no need to call this method. However, when |
| custom names are used in the protos then the specific names should be pushed into |
| the olt_pm_metrics class. |
| |
| :return: |
| """ |
| nni_pm_names = { |
| ('intf_id', PmConfig.CONTEXT), # Physical device interface ID/Port number |
| |
| ('admin_state', PmConfig.STATE), |
| ('oper_status', PmConfig.STATE), |
| ('port_no', PmConfig.GAUGE), |
| ('rx_bytes', PmConfig.COUNTER), |
| ('rx_packets', PmConfig.COUNTER), |
| ('rx_ucast_packets', PmConfig.COUNTER), |
| ('rx_mcast_packets', PmConfig.COUNTER), |
| ('rx_bcast_packets', PmConfig.COUNTER), |
| ('rx_error_packets', PmConfig.COUNTER), |
| ('tx_bytes', PmConfig.COUNTER), |
| ('tx_packets', PmConfig.COUNTER), |
| ('tx_ucast_packets', PmConfig.COUNTER), |
| ('tx_mcast_packets', PmConfig.COUNTER), |
| ('tx_bcast_packets', PmConfig.COUNTER), |
| ('tx_error_packets', PmConfig.COUNTER) |
| } |
| nni_pm_names_from_kpi_extension = { |
| ('intf_id', PmConfig.CONTEXT), # Physical device interface ID/Port number |
| |
| ('admin_state', PmConfig.STATE), |
| ('oper_status', PmConfig.STATE), |
| |
| ('rx_bytes', PmConfig.COUNTER), |
| ('rx_packets', PmConfig.COUNTER), |
| ('rx_ucast_packets', PmConfig.COUNTER), |
| ('rx_mcast_packets', PmConfig.COUNTER), |
| ('rx_bcast_packets', PmConfig.COUNTER), |
| ('rx_error_packets', PmConfig.COUNTER), |
| |
| ('tx_bytes', PmConfig.COUNTER), |
| ('tx_packets', PmConfig.COUNTER), |
| ('tx_ucast_packets', PmConfig.COUNTER), |
| ('tx_mcast_packets', PmConfig.COUNTER), |
| ('tx_bcast_packets', PmConfig.COUNTER), |
| ('tx_error_packets', PmConfig.COUNTER), |
| ('rx_crc_errors', PmConfig.COUNTER), |
| ('bip_errors', PmConfig.COUNTER), |
| } |
| |
| # pon_names uses same structure as nmi_names with the addition of pon_id to context |
| pon_pm_names = { |
| ('pon_id', PmConfig.CONTEXT), # PON ID (0..n) |
| ('port_no', PmConfig.CONTEXT), |
| |
| ('admin_state', PmConfig.STATE), |
| ('oper_status', PmConfig.STATE), |
| ('rx_bytes', PmConfig.COUNTER), |
| ('rx_packets', PmConfig.COUNTER), |
| ('rx_ucast_packets', PmConfig.COUNTER), |
| ('rx_mcast_packets', PmConfig.COUNTER), |
| ('rx_bcast_packets', PmConfig.COUNTER), |
| ('rx_error_packets', PmConfig.COUNTER), |
| ('tx_bytes', PmConfig.COUNTER), |
| ('tx_packets', PmConfig.COUNTER), |
| ('tx_ucast_packets', PmConfig.COUNTER), |
| ('tx_mcast_packets', PmConfig.COUNTER), |
| ('tx_bcast_packets', PmConfig.COUNTER), |
| ('tx_error_packets', PmConfig.COUNTER) |
| } |
| pon_pm_names_from_kpi_extension = { |
| ('intf_id', PmConfig.CONTEXT), # Physical device port number (PON) |
| ('pon_id', PmConfig.CONTEXT), # PON ID (0..n) |
| |
| ('admin_state', PmConfig.STATE), |
| ('oper_status', PmConfig.STATE), |
| ('rx_packets', PmConfig.COUNTER), |
| ('rx_bytes', PmConfig.COUNTER), |
| ('tx_packets', PmConfig.COUNTER), |
| ('tx_bytes', PmConfig.COUNTER), |
| ('tx_bip_errors', PmConfig.COUNTER), |
| ('in_service_onus', PmConfig.GAUGE), |
| ('closest_onu_distance', PmConfig.GAUGE) |
| } |
| onu_pm_names = { |
| ('intf_id', PmConfig.CONTEXT), # Physical device port number (PON) |
| ('pon_id', PmConfig.CONTEXT), |
| ('onu_id', PmConfig.CONTEXT), |
| |
| ('fiber_length', PmConfig.GAUGE), |
| ('equalization_delay', PmConfig.GAUGE), |
| ('rssi', PmConfig.GAUGE), |
| } |
| gem_pm_names = { |
| ('intf_id', PmConfig.CONTEXT), # Physical device port number (PON) |
| ('pon_id', PmConfig.CONTEXT), |
| ('onu_id', PmConfig.CONTEXT), |
| ('gem_id', PmConfig.CONTEXT), |
| |
| ('alloc_id', PmConfig.GAUGE), |
| ('rx_packets', PmConfig.COUNTER), |
| ('rx_bytes', PmConfig.COUNTER), |
| ('tx_packets', PmConfig.COUNTER), |
| ('tx_bytes', PmConfig.COUNTER), |
| } |
| # Build a dict for the names. The caller will index to the correct values |
| names_dict = {"nni_pm_names": nni_pm_names, |
| "pon_pm_names": pon_pm_names, |
| "pon_pm_names_orig": pon_pm_names_from_kpi_extension, |
| "onu_pm_names": onu_pm_names, |
| "gem_pm_names": gem_pm_names, |
| |
| } |
| |
| return names_dict |
| |
| def init_ports(self, device_id=12345, type="nni", log=None): |
| """ |
| This method collects the port objects: nni and pon that are updated with the |
| current data from the OLT |
| |
| Both the northbound (nni) and southbound ports are indexed by the interface id (intf_id) |
| and NOT the port number. When the port object is instantiated it will contain the intf_id and |
| port_no values |
| |
| :param type: |
| :param device_id: |
| :param log: |
| :return: |
| """ |
| try: |
| if type == "nni": |
| nni_ports = {} |
| for i in range(0, 1): |
| nni_port = self.build_port_object(i, type='nni') |
| nni_ports[nni_port.intf_id] = nni_port |
| return nni_ports |
| elif type == "pon": |
| pon_ports = {} |
| for i in range(0, 16): |
| pon_port = self.build_port_object(i, type="pon") |
| pon_ports[pon_port.intf_id] = pon_port |
| return pon_ports |
| else: |
| self.log.exception("Unmapped port type requested = " , type=type) |
| raise Exception("Unmapped port type requested = " + type) |
| |
| except Exception as err: |
| raise Exception(err) |
| |
| def build_port_object(self, port_num, type="nni"): |
| """ |
| Seperate method to allow for updating north and southbound ports |
| newly discovered ports and devices |
| |
| :param port_num: |
| :param type: |
| :return: |
| """ |
| try: |
| """ |
| This builds a port object which is added to the |
| appropriate northbound or southbound values |
| """ |
| if type == "nni": |
| kwargs = { |
| 'port_no': port_num, |
| 'intf_id': self.platform.intf_id_to_port_no(port_num, |
| Port.ETHERNET_NNI), |
| "device_id": self.device.device_id |
| } |
| nni_port = NniPort |
| port = nni_port( **kwargs) |
| return port |
| elif type == "pon": |
| # PON ports require a different configuration |
| # intf_id and pon_id are currently equal. |
| kwargs = { |
| 'port_no': port_num, |
| 'intf_id': self.platform.intf_id_to_port_no(port_num, |
| Port.PON_OLT), |
| 'pon-id': self.platform.intf_id_to_port_no(port_num, |
| Port.PON_OLT), |
| "device_id": self.device.device_id |
| } |
| pon_port = PonPort |
| port = pon_port(**kwargs) |
| return port |
| |
| else: |
| self.log.exception("Unknown port type") |
| raise Exception("Unknown port type") |
| |
| except Exception as err: |
| self.log.exception("Unknown port type", error=err) |
| raise Exception(err) |
| |
| def update_port_object_kpi_data(self, port_object, datadict={}): |
| """ |
| This method takes the formatted data the is marshalled from |
| the initicator collector and updates the corresponding property by |
| attr get and set. |
| |
| :param port: The port class to be updated |
| :param datadict: |
| :return: |
| """ |
| |
| try: |
| cur_attr = "" |
| if isinstance(port_object, NniPort): |
| for k, v in datadict.items(): |
| cur_attr = k |
| if hasattr(port_object, k): |
| setattr(port_object, k, v) |
| elif isinstance(port_object, PonPort): |
| for k, v in datadict.items(): |
| cur_attr = k |
| if hasattr(port_object, k): |
| setattr(port_object, k, v) |
| else: |
| raise Exception("Must be either PON or NNI port.") |
| return |
| except Exception as err: |
| self.log.exception("Caught error updating port data: ", cur_attr=cur_attr, errormsg=err.message) |
| raise Exception(err) |
| |
| |
| class PonPort(object): |
| """ |
| This is a highly reduced version taken from the adtran pon_port. |
| TODO: Extend for use in the openolt adapter set. |
| """ |
| MAX_ONUS_SUPPORTED = 256 |
| DEFAULT_ENABLED = False |
| MAX_DEPLOYMENT_RANGE = 25000 # Meters (OLT-PB maximum) |
| |
| _MCAST_ONU_ID = 253 |
| _MCAST_ALLOC_BASE = 0x500 |
| |
| _SUPPORTED_ACTIVATION_METHODS = ['autodiscovery'] # , 'autoactivate'] |
| _SUPPORTED_AUTHENTICATION_METHODS = ['serial-number'] |
| |
| def __init__(self, **kwargs): |
| assert 'pon-id' in kwargs, 'PON ID not found' |
| |
| self._pon_id = kwargs['pon-id'] |
| self._device_id = kwargs['device_id'] |
| self._intf_id = kwargs['intf_id'] |
| self._port_no = kwargs['port_no'] |
| self._port_id = 0 |
| # self._name = 'xpon 0/{}'.format(self._pon_id+1) |
| self._label = 'pon-{}'.format(self._pon_id) |
| |
| self._onus = {} # serial_number-base64 -> ONU (allowed list) |
| self._onu_by_id = {} # onu-id -> ONU |
| |
| """ |
| Statistics taken from nni_port |
| self.intf_id = 0 #handled by getter |
| self.port_no = 0 #handled by getter |
| self.port_id = 0 #handled by getter |
| |
| Note: In the current implementation of the kpis coming from the BAL the stats are the |
| samne model for NNI and PON. |
| |
| TODO: Integrate additional kpis for the PON and other southbound port objecgts. |
| |
| """ |
| |
| self.rx_bytes = 0 |
| self.rx_packets = 0 |
| self.rx_mcast_packets = 0 |
| self.rx_bcast_packets = 0 |
| self.rx_error_packets = 0 |
| self.tx_bytes = 0 |
| self.tx_packets = 0 |
| self.tx_ucast_packets = 0 |
| self.tx_mcast_packets = 0 |
| self.tx_bcast_packets = 0 |
| self.tx_error_packets = 0 |
| return |
| |
| def __str__(self): |
| return "PonPort-{}: Admin: {}, Oper: {}, OLT: {}".format(self._label, |
| self._admin_state, |
| self._oper_status, |
| self.olt) |
| |
| @property |
| def intf_id(self): |
| return self._intf_id |
| |
| @intf_id.setter |
| def intf_id(self, value): |
| self._intf_id = value |
| |
| @property |
| def pon_id(self): |
| return self._pon_id |
| |
| @pon_id.setter |
| def pon_id(self, value): |
| self._pon_id = value |
| |
| @property |
| def port_no(self): |
| return self._port_no |
| |
| @port_no.setter |
| def port_no(self, value): |
| self._port_no = value |
| |
| @property |
| def port_id(self): |
| return self._port_id |
| |
| @intf_id.setter |
| def port_id(self, value): |
| self._port_id = value |
| |
| @property |
| def onus(self): |
| """ |
| Get a set of all ONUs. While the set is immutable, do not use this method |
| to get a collection that you will iterate through that my yield the CPU |
| such as inline callback. ONUs may be deleted at any time and they will |
| set some references to other objects to NULL during the 'delete' call. |
| Instead, get a list of ONU-IDs and iterate on these and call the 'onu' |
| method below (which will return 'None' if the ONU has been deleted. |
| |
| :return: (frozenset) collection of ONU objects on this PON |
| """ |
| return frozenset(self._onus.values()) |
| |
| @property |
| def onu_ids(self): |
| return frozenset(self._onu_by_id.keys()) |
| |
| def onu(self, onu_id): |
| return self._onu_by_id.get(onu_id) |
| |
| |
| class NniPort(object): |
| """ |
| Northbound network port, often Ethernet-based |
| |
| This is a highly reduced version taken from the adtran nni_port code set |
| TODO: add functions to allow for port specific values and operations |
| |
| """ |
| def __init__(self, **kwargs): |
| # TODO: Extend for use in the openolt adapter set. |
| self.port_no = kwargs.get('port_no') |
| self._port_no = self.port_no |
| self._name = kwargs.get('name', 'nni-{}'.format(self._port_no)) |
| self._logical_port = None |
| |
| # Statistics |
| self.intf_id = kwargs.pop('intf_id', None) |
| self.port_no = 0 |
| self.rx_bytes = 0 |
| self.rx_packets = 0 |
| self.rx_mcast_packets = 0 |
| self.rx_bcast_packets = 0 |
| self.rx_error_packets = 0 |
| self.tx_bytes = 0 |
| self.tx_packets = 0 |
| self.tx_ucast_packets = 0 |
| self.tx_mcast_packets = 0 |
| self.tx_bcast_packets = 0 |
| self.tx_error_packets = 0 |
| return |
| |
| def __str__(self): |
| return "NniPort-{}: Admin: {}, Oper: {}, parent: {}".format(self._port_no, |
| self._admin_state, |
| self._oper_status, |
| self._parent) |