| /* |
| * Copyright 2018-present Open Networking Foundation |
| |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| //Package core provides the utility for olt devices, flows and statistics |
| package core |
| |
| import ( |
| "context" |
| "encoding/binary" |
| "encoding/hex" |
| "errors" |
| "fmt" |
| "io" |
| "net" |
| "strconv" |
| "strings" |
| "sync" |
| "time" |
| |
| "github.com/cenkalti/backoff/v3" |
| "github.com/gogo/protobuf/proto" |
| "github.com/golang/protobuf/ptypes" |
| grpc_middleware "github.com/grpc-ecosystem/go-grpc-middleware" |
| grpc_opentracing "github.com/grpc-ecosystem/go-grpc-middleware/tracing/opentracing" |
| "github.com/opencord/voltha-lib-go/v4/pkg/adapters/adapterif" |
| "github.com/opencord/voltha-lib-go/v4/pkg/config" |
| "github.com/opencord/voltha-lib-go/v4/pkg/events/eventif" |
| flow_utils "github.com/opencord/voltha-lib-go/v4/pkg/flows" |
| "github.com/opencord/voltha-lib-go/v4/pkg/log" |
| "github.com/opencord/voltha-lib-go/v4/pkg/pmmetrics" |
| |
| "github.com/opencord/voltha-openolt-adapter/internal/pkg/olterrors" |
| rsrcMgr "github.com/opencord/voltha-openolt-adapter/internal/pkg/resourcemanager" |
| "github.com/opencord/voltha-protos/v4/go/common" |
| "github.com/opencord/voltha-protos/v4/go/extension" |
| ic "github.com/opencord/voltha-protos/v4/go/inter_container" |
| of "github.com/opencord/voltha-protos/v4/go/openflow_13" |
| oop "github.com/opencord/voltha-protos/v4/go/openolt" |
| "github.com/opencord/voltha-protos/v4/go/voltha" |
| "google.golang.org/grpc" |
| "google.golang.org/grpc/codes" |
| "google.golang.org/grpc/status" |
| ) |
| |
| // Constants for number of retries and for timeout |
| const ( |
| InvalidPort = 0xffffffff |
| MaxNumOfGroupHandlerChannels = 256 |
| |
| McastFlowOrGroupAdd = "McastFlowOrGroupAdd" |
| McastFlowOrGroupModify = "McastFlowOrGroupModify" |
| McastFlowOrGroupRemove = "McastFlowOrGroupRemove" |
| oltPortInfoTimeout = 3 |
| ) |
| |
| //DeviceHandler will interact with the OLT device. |
| type DeviceHandler struct { |
| cm *config.ConfigManager |
| device *voltha.Device |
| coreProxy adapterif.CoreProxy |
| AdapterProxy adapterif.AdapterProxy |
| EventProxy eventif.EventProxy |
| openOLT *OpenOLT |
| exitChannel chan int |
| lockDevice sync.RWMutex |
| Client oop.OpenoltClient |
| transitionMap *TransitionMap |
| clientCon *grpc.ClientConn |
| flowMgr []*OpenOltFlowMgr |
| groupMgr *OpenOltGroupMgr |
| eventMgr *OpenOltEventMgr |
| resourceMgr *rsrcMgr.OpenOltResourceMgr |
| |
| discOnus sync.Map |
| onus sync.Map |
| portStats *OpenOltStatisticsMgr |
| metrics *pmmetrics.PmMetrics |
| stopCollector chan bool |
| stopHeartbeatCheck chan bool |
| activePorts sync.Map |
| stopIndications chan bool |
| isReadIndicationRoutineActive bool |
| |
| totalPonPorts uint32 |
| perOnuChannel map[string]onuIndicationChannels |
| perOnuChannelLock sync.Mutex |
| |
| // Slice of channels. Each channel in slice, index by (mcast-group-id modulo MaxNumOfGroupHandlerChannels) |
| // A go routine per index, waits on a unique channel for incoming mcast flow or group (add/modify/remove). |
| incomingMcastFlowOrGroup []chan McastFlowOrGroupControlBlock |
| } |
| |
| //OnuDevice represents ONU related info |
| type OnuDevice struct { |
| deviceID string |
| deviceType string |
| serialNumber string |
| onuID uint32 |
| intfID uint32 |
| proxyDeviceID string |
| losRaised bool |
| rdiRaised bool |
| } |
| |
| type perOnuIndication struct { |
| ctx context.Context |
| indication *oop.Indication |
| serialNumber string |
| } |
| |
| type onuIndicationChannels struct { |
| indicationChannel chan perOnuIndication |
| stopChannel chan struct{} |
| } |
| |
| //McastFlowOrGroupControlBlock is created per mcast flow/group add/modify/remove and pushed on the incomingMcastFlowOrGroup channel slice |
| //The McastFlowOrGroupControlBlock is then picked by the mcastFlowOrGroupChannelHandlerRoutine for further processing. |
| //There are MaxNumOfGroupHandlerChannels number of mcastFlowOrGroupChannelHandlerRoutine routines which monitor for any incoming mcast flow/group messages |
| //and process them serially. The mcast flow/group are assigned these routines based on formula (group-id modulo MaxNumOfGroupHandlerChannels) |
| type McastFlowOrGroupControlBlock struct { |
| ctx context.Context // Flow/group handler context |
| flowOrGroupAction string // one of McastFlowOrGroupAdd, McastFlowOrGroupModify or McastFlowOrGroupDelete |
| flow *voltha.OfpFlowStats // Flow message (can be nil or valid flow) |
| group *voltha.OfpGroupEntry // Group message (can be nil or valid group) |
| errChan *chan error // channel to report the mcast Flow/group handling error |
| } |
| |
| var pmNames = []string{ |
| "rx_bytes", |
| "rx_packets", |
| "rx_mcast_packets", |
| "rx_bcast_packets", |
| "tx_bytes", |
| "tx_packets", |
| "tx_mcast_packets", |
| "tx_bcast_packets", |
| } |
| |
| //NewOnuDevice creates a new Onu Device |
| func NewOnuDevice(devID, deviceTp, serialNum string, onuID, intfID uint32, proxyDevID string, losRaised bool) *OnuDevice { |
| var device OnuDevice |
| device.deviceID = devID |
| device.deviceType = deviceTp |
| device.serialNumber = serialNum |
| device.onuID = onuID |
| device.intfID = intfID |
| device.proxyDeviceID = proxyDevID |
| device.losRaised = losRaised |
| return &device |
| } |
| |
| //NewDeviceHandler creates a new device handler |
| func NewDeviceHandler(cp adapterif.CoreProxy, ap adapterif.AdapterProxy, ep eventif.EventProxy, device *voltha.Device, adapter *OpenOLT, cm *config.ConfigManager) *DeviceHandler { |
| var dh DeviceHandler |
| dh.cm = cm |
| dh.coreProxy = cp |
| dh.AdapterProxy = ap |
| dh.EventProxy = ep |
| cloned := (proto.Clone(device)).(*voltha.Device) |
| dh.device = cloned |
| dh.openOLT = adapter |
| dh.exitChannel = make(chan int, 1) |
| dh.lockDevice = sync.RWMutex{} |
| dh.stopCollector = make(chan bool, 2) |
| dh.stopHeartbeatCheck = make(chan bool, 2) |
| dh.metrics = pmmetrics.NewPmMetrics(cloned.Id, pmmetrics.Frequency(150), pmmetrics.FrequencyOverride(false), pmmetrics.Grouped(false), pmmetrics.Metrics(pmNames)) |
| dh.activePorts = sync.Map{} |
| dh.stopIndications = make(chan bool, 1) |
| dh.perOnuChannel = make(map[string]onuIndicationChannels) |
| // Create a slice of buffered channels for handling concurrent mcast flow/group. |
| dh.incomingMcastFlowOrGroup = make([]chan McastFlowOrGroupControlBlock, MaxNumOfGroupHandlerChannels) |
| for i := range dh.incomingMcastFlowOrGroup { |
| dh.incomingMcastFlowOrGroup[i] = make(chan McastFlowOrGroupControlBlock, MaxNumOfGroupHandlerChannels) |
| // Spin up a go routine to handling incoming mcast flow/group (add/modify/remove). |
| // There will be MaxNumOfGroupHandlerChannels number of mcastFlowOrGroupChannelHandlerRoutine go routines. |
| // These routines will be blocked on the dh.incomingMcastFlowOrGroup[mcast-group-id modulo MaxNumOfGroupHandlerChannels] channel |
| // for incoming mcast flow/group to be processed serially. |
| go dh.mcastFlowOrGroupChannelHandlerRoutine(dh.incomingMcastFlowOrGroup[i]) |
| } |
| //TODO initialize the support classes. |
| return &dh |
| } |
| |
| // start save the device to the data model |
| func (dh *DeviceHandler) start(ctx context.Context) { |
| dh.lockDevice.Lock() |
| defer dh.lockDevice.Unlock() |
| logger.Debugw(ctx, "starting-device-agent", log.Fields{"device": dh.device}) |
| // Add the initial device to the local model |
| logger.Debug(ctx, "device-agent-started") |
| } |
| |
| // stop stops the device dh. Not much to do for now |
| func (dh *DeviceHandler) stop(ctx context.Context) { |
| dh.lockDevice.Lock() |
| defer dh.lockDevice.Unlock() |
| logger.Debug(ctx, "stopping-device-agent") |
| dh.exitChannel <- 1 |
| logger.Debug(ctx, "device-agent-stopped") |
| } |
| |
| func macifyIP(ip net.IP) string { |
| if len(ip) > 0 { |
| oct1 := strconv.FormatInt(int64(ip[12]), 16) |
| oct2 := strconv.FormatInt(int64(ip[13]), 16) |
| oct3 := strconv.FormatInt(int64(ip[14]), 16) |
| oct4 := strconv.FormatInt(int64(ip[15]), 16) |
| return fmt.Sprintf("00:00:%02v:%02v:%02v:%02v", oct1, oct2, oct3, oct4) |
| } |
| return "" |
| } |
| |
| func generateMacFromHost(ctx context.Context, host string) (string, error) { |
| var genmac string |
| var addr net.IP |
| var ips []string |
| var err error |
| |
| logger.Debugw(ctx, "generating-mac-from-host", log.Fields{"host": host}) |
| |
| if addr = net.ParseIP(host); addr == nil { |
| logger.Debugw(ctx, "looking-up-hostname", log.Fields{"host": host}) |
| |
| if ips, err = net.LookupHost(host); err == nil { |
| logger.Debugw(ctx, "dns-result-ips", log.Fields{"ips": ips}) |
| if addr = net.ParseIP(ips[0]); addr == nil { |
| return "", olterrors.NewErrInvalidValue(log.Fields{"ip": ips[0]}, nil) |
| } |
| genmac = macifyIP(addr) |
| logger.Debugw(ctx, "using-ip-as-mac", |
| log.Fields{"host": ips[0], |
| "mac": genmac}) |
| return genmac, nil |
| } |
| return "", olterrors.NewErrAdapter("cannot-resolve-hostname-to-ip", log.Fields{"host": host}, err) |
| } |
| |
| genmac = macifyIP(addr) |
| logger.Debugw(ctx, "using-ip-as-mac", |
| log.Fields{"host": host, |
| "mac": genmac}) |
| return genmac, nil |
| } |
| |
| func macAddressToUint32Array(mac string) []uint32 { |
| slist := strings.Split(mac, ":") |
| result := make([]uint32, len(slist)) |
| var err error |
| var tmp int64 |
| for index, val := range slist { |
| if tmp, err = strconv.ParseInt(val, 16, 32); err != nil { |
| return []uint32{1, 2, 3, 4, 5, 6} |
| } |
| result[index] = uint32(tmp) |
| } |
| return result |
| } |
| |
| //GetportLabel returns the label for the NNI and the PON port based on port number and port type |
| func GetportLabel(portNum uint32, portType voltha.Port_PortType) (string, error) { |
| |
| switch portType { |
| case voltha.Port_ETHERNET_NNI: |
| return fmt.Sprintf("nni-%d", portNum), nil |
| case voltha.Port_PON_OLT: |
| return fmt.Sprintf("pon-%d", portNum), nil |
| } |
| |
| return "", olterrors.NewErrInvalidValue(log.Fields{"port-type": portType}, nil) |
| } |
| |
| func (dh *DeviceHandler) addPort(ctx context.Context, intfID uint32, portType voltha.Port_PortType, state string) error { |
| var operStatus common.OperStatus_Types |
| if state == "up" { |
| operStatus = voltha.OperStatus_ACTIVE |
| //populating the intfStatus map |
| dh.activePorts.Store(intfID, true) |
| } else { |
| operStatus = voltha.OperStatus_DISCOVERED |
| dh.activePorts.Store(intfID, false) |
| } |
| portNum := IntfIDToPortNo(intfID, portType) |
| label, err := GetportLabel(intfID, portType) |
| if err != nil { |
| return olterrors.NewErrNotFound("port-label", log.Fields{"port-number": portNum, "port-type": portType}, err) |
| } |
| |
| if port, err := dh.coreProxy.GetDevicePort(log.WithSpanFromContext(context.TODO(), ctx), dh.device.Id, portNum); err == nil && port.Type == portType { |
| logger.Debug(ctx, "port-already-exists-updating-oper-status-of-port") |
| if err := dh.coreProxy.PortStateUpdate(log.WithSpanFromContext(context.TODO(), ctx), dh.device.Id, portType, portNum, operStatus); err != nil { |
| return olterrors.NewErrAdapter("failed-to-update-port-state", log.Fields{ |
| "device-id": dh.device.Id, |
| "port-type": portType, |
| "port-number": portNum, |
| "oper-status": operStatus}, err).Log() |
| } |
| return nil |
| } |
| // Now create Port |
| capacity := uint32(of.OfpPortFeatures_OFPPF_1GB_FD | of.OfpPortFeatures_OFPPF_FIBER) |
| port := &voltha.Port{ |
| PortNo: portNum, |
| Label: label, |
| Type: portType, |
| OperStatus: operStatus, |
| OfpPort: &of.OfpPort{ |
| HwAddr: macAddressToUint32Array(dh.device.MacAddress), |
| Config: 0, |
| State: uint32(of.OfpPortState_OFPPS_LIVE), |
| Curr: capacity, |
| Advertised: capacity, |
| Peer: capacity, |
| CurrSpeed: uint32(of.OfpPortFeatures_OFPPF_1GB_FD), |
| MaxSpeed: uint32(of.OfpPortFeatures_OFPPF_1GB_FD), |
| }, |
| } |
| logger.Debugw(ctx, "sending-port-update-to-core", log.Fields{"port": port}) |
| // Synchronous call to update device - this method is run in its own go routine |
| if err := dh.coreProxy.PortCreated(log.WithSpanFromContext(context.TODO(), ctx), dh.device.Id, port); err != nil { |
| return olterrors.NewErrAdapter("error-creating-port", log.Fields{ |
| "device-id": dh.device.Id, |
| "port-type": portType}, err) |
| } |
| go dh.updateLocalDevice(ctx) |
| return nil |
| } |
| |
| func (dh *DeviceHandler) updateLocalDevice(ctx context.Context) { |
| device, err := dh.coreProxy.GetDevice(log.WithSpanFromContext(context.TODO(), ctx), dh.device.Id, dh.device.Id) |
| if err != nil || device == nil { |
| logger.Errorf(ctx, "device-not-found", log.Fields{"device-id": dh.device.Id}, err) |
| return |
| } |
| dh.lockDevice.Lock() |
| defer dh.lockDevice.Unlock() |
| dh.device = device |
| } |
| |
| // nolint: gocyclo |
| // readIndications to read the indications from the OLT device |
| func (dh *DeviceHandler) readIndications(ctx context.Context) error { |
| defer logger.Debugw(ctx, "indications-ended", log.Fields{"device-id": dh.device.Id}) |
| defer func() { |
| dh.lockDevice.Lock() |
| dh.isReadIndicationRoutineActive = false |
| dh.lockDevice.Unlock() |
| }() |
| indications, err := dh.startOpenOltIndicationStream(ctx) |
| if err != nil { |
| return err |
| } |
| /* get device state */ |
| device, err := dh.coreProxy.GetDevice(ctx, dh.device.Id, dh.device.Id) |
| if err != nil || device == nil { |
| /*TODO: needs to handle error scenarios */ |
| return olterrors.NewErrNotFound("device", log.Fields{"device-id": dh.device.Id}, err) |
| } |
| |
| // Create an exponential backoff around re-enabling indications. The |
| // maximum elapsed time for the back off is set to 0 so that we will |
| // continue to retry. The max interval defaults to 1m, but is set |
| // here for code clarity |
| indicationBackoff := backoff.NewExponentialBackOff() |
| indicationBackoff.MaxElapsedTime = 0 |
| indicationBackoff.MaxInterval = 1 * time.Minute |
| |
| dh.lockDevice.Lock() |
| dh.isReadIndicationRoutineActive = true |
| dh.lockDevice.Unlock() |
| |
| Loop: |
| for { |
| select { |
| case <-dh.stopIndications: |
| logger.Debugw(ctx, "stopping-collecting-indications-for-olt", log.Fields{"device-id": dh.device.Id}) |
| break Loop |
| default: |
| indication, err := indications.Recv() |
| if err == io.EOF { |
| logger.Infow(ctx, "eof-for-indications", |
| log.Fields{"err": err, |
| "device-id": dh.device.Id}) |
| // Use an exponential back off to prevent getting into a tight loop |
| duration := indicationBackoff.NextBackOff() |
| if duration == backoff.Stop { |
| // If we reach a maximum then warn and reset the backoff |
| // timer and keep attempting. |
| logger.Warnw(ctx, "maximum-indication-backoff-reached--resetting-backoff-timer", |
| log.Fields{"max-indication-backoff": indicationBackoff.MaxElapsedTime, |
| "device-id": dh.device.Id}) |
| indicationBackoff.Reset() |
| } |
| |
| // On failure process a backoff timer while watching for stopIndications |
| // events |
| backoffTimer := time.NewTimer(indicationBackoff.NextBackOff()) |
| select { |
| case <-dh.stopIndications: |
| logger.Debugw(ctx, "stopping-collecting-indications-for-olt", log.Fields{"device-id": dh.device.Id}) |
| if !backoffTimer.Stop() { |
| <-backoffTimer.C |
| } |
| break Loop |
| case <-backoffTimer.C: |
| // backoffTimer expired continue |
| } |
| if indications, err = dh.startOpenOltIndicationStream(ctx); err != nil { |
| return err |
| } |
| continue |
| } |
| if err != nil { |
| logger.Errorw(ctx, "read-indication-error", |
| log.Fields{"err": err, |
| "device-id": dh.device.Id}) |
| // Close the stream, and re-initialize it |
| if err = indications.CloseSend(); err != nil { |
| // Ok to ignore here, because we landed here due to a problem on the stream |
| // In all probability, the closeSend call may fail |
| logger.Debugw(ctx, "error-closing-send stream--error-ignored", |
| log.Fields{"err": err, |
| "device-id": dh.device.Id}) |
| } |
| if indications, err = dh.startOpenOltIndicationStream(ctx); err != nil { |
| return err |
| } |
| // once we re-initialized the indication stream, continue to read indications |
| continue |
| } |
| // Reset backoff if we have a successful receive |
| indicationBackoff.Reset() |
| // When OLT is admin down, ignore all indications. |
| if device.AdminState == voltha.AdminState_DISABLED && !isIndicationAllowedDuringOltAdminDown(indication) { |
| logger.Debugw(ctx, "olt-is-admin-down, ignore indication", |
| log.Fields{"indication": indication, |
| "device-id": dh.device.Id}) |
| continue |
| } |
| dh.handleIndication(ctx, indication) |
| } |
| } |
| // Close the send stream |
| _ = indications.CloseSend() // Ok to ignore error, as we stopping the readIndication anyway |
| |
| return nil |
| } |
| |
| func (dh *DeviceHandler) startOpenOltIndicationStream(ctx context.Context) (oop.Openolt_EnableIndicationClient, error) { |
| |
| indications, err := dh.Client.EnableIndication(ctx, new(oop.Empty)) |
| if err != nil { |
| return nil, olterrors.NewErrCommunication("indication-read-failure", log.Fields{"device-id": dh.device.Id}, err).Log() |
| } |
| if indications == nil { |
| return nil, olterrors.NewErrInvalidValue(log.Fields{"indications": nil, "device-id": dh.device.Id}, nil).Log() |
| } |
| |
| return indications, nil |
| } |
| |
| // isIndicationAllowedDuringOltAdminDown returns true if the indication is allowed during OLT Admin down, else false |
| func isIndicationAllowedDuringOltAdminDown(indication *oop.Indication) bool { |
| switch indication.Data.(type) { |
| case *oop.Indication_OltInd, *oop.Indication_IntfInd, *oop.Indication_IntfOperInd: |
| return true |
| |
| default: |
| return false |
| } |
| } |
| |
| func (dh *DeviceHandler) handleOltIndication(ctx context.Context, oltIndication *oop.OltIndication) error { |
| raisedTs := time.Now().UnixNano() |
| if oltIndication.OperState == "up" && dh.transitionMap.currentDeviceState != deviceStateUp { |
| dh.transitionMap.Handle(ctx, DeviceUpInd) |
| } else if oltIndication.OperState == "down" { |
| dh.transitionMap.Handle(ctx, DeviceDownInd) |
| } |
| // Send or clear Alarm |
| if err := dh.eventMgr.oltUpDownIndication(ctx, oltIndication, dh.device.Id, raisedTs); err != nil { |
| return olterrors.NewErrAdapter("failed-indication", log.Fields{ |
| "device-id": dh.device.Id, |
| "indication": oltIndication, |
| "timestamp": raisedTs}, err) |
| } |
| return nil |
| } |
| |
| // nolint: gocyclo |
| func (dh *DeviceHandler) handleIndication(ctx context.Context, indication *oop.Indication) { |
| raisedTs := time.Now().UnixNano() |
| switch indication.Data.(type) { |
| case *oop.Indication_OltInd: |
| span, ctx := log.CreateChildSpan(ctx, "olt-indication", log.Fields{"device-id": dh.device.Id}) |
| defer span.Finish() |
| |
| if err := dh.handleOltIndication(ctx, indication.GetOltInd()); err != nil { |
| _ = olterrors.NewErrAdapter("handle-indication-error", log.Fields{"type": "olt", "device-id": dh.device.Id}, err).Log() |
| } |
| case *oop.Indication_IntfInd: |
| span, ctx := log.CreateChildSpan(ctx, "interface-indication", log.Fields{"device-id": dh.device.Id}) |
| defer span.Finish() |
| |
| intfInd := indication.GetIntfInd() |
| go func() { |
| if err := dh.addPort(ctx, intfInd.GetIntfId(), voltha.Port_PON_OLT, intfInd.GetOperState()); err != nil { |
| _ = olterrors.NewErrAdapter("handle-indication-error", log.Fields{"type": "interface", "device-id": dh.device.Id}, err).Log() |
| } |
| }() |
| logger.Infow(ctx, "received-interface-indication", log.Fields{"InterfaceInd": intfInd, "device-id": dh.device.Id}) |
| case *oop.Indication_IntfOperInd: |
| span, ctx := log.CreateChildSpan(ctx, "interface-oper-indication", log.Fields{"device-id": dh.device.Id}) |
| defer span.Finish() |
| |
| intfOperInd := indication.GetIntfOperInd() |
| if intfOperInd.GetType() == "nni" { |
| go func() { |
| if err := dh.addPort(ctx, intfOperInd.GetIntfId(), voltha.Port_ETHERNET_NNI, intfOperInd.GetOperState()); err != nil { |
| _ = olterrors.NewErrAdapter("handle-indication-error", log.Fields{"type": "interface-oper-nni", "device-id": dh.device.Id}, err).Log() |
| } |
| }() |
| if err := dh.resourceMgr.AddNNIToKVStore(ctx, intfOperInd.GetIntfId()); err != nil { |
| logger.Warn(ctx, err) |
| } |
| } else if intfOperInd.GetType() == "pon" { |
| // TODO: Check what needs to be handled here for When PON PORT down, ONU will be down |
| // Handle pon port update |
| go func() { |
| if err := dh.addPort(ctx, intfOperInd.GetIntfId(), voltha.Port_PON_OLT, intfOperInd.GetOperState()); err != nil { |
| _ = olterrors.NewErrAdapter("handle-indication-error", log.Fields{"type": "interface-oper-pon", "device-id": dh.device.Id}, err).Log() |
| } |
| }() |
| go dh.eventMgr.oltIntfOperIndication(ctx, indication.GetIntfOperInd(), dh.device.Id, raisedTs) |
| } |
| logger.Infow(ctx, "received-interface-oper-indication", |
| log.Fields{"interfaceOperInd": intfOperInd, |
| "device-id": dh.device.Id}) |
| case *oop.Indication_OnuDiscInd: |
| span, ctx := log.CreateChildSpan(ctx, "onu-discovery-indication", log.Fields{"device-id": dh.device.Id}) |
| defer span.Finish() |
| |
| onuDiscInd := indication.GetOnuDiscInd() |
| logger.Infow(ctx, "received-onu-discovery-indication", log.Fields{"OnuDiscInd": onuDiscInd, "device-id": dh.device.Id}) |
| sn := dh.stringifySerialNumber(onuDiscInd.SerialNumber) |
| //put message to channel and return immediately |
| dh.putOnuIndicationToChannel(ctx, indication, sn) |
| case *oop.Indication_OnuInd: |
| span, ctx := log.CreateChildSpan(ctx, "onu-indication", log.Fields{"device-id": dh.device.Id}) |
| defer span.Finish() |
| |
| onuInd := indication.GetOnuInd() |
| logger.Infow(ctx, "received-onu-indication", log.Fields{"OnuInd": onuInd, "device-id": dh.device.Id}) |
| sn := dh.stringifySerialNumber(onuInd.SerialNumber) |
| //put message to channel and return immediately |
| dh.putOnuIndicationToChannel(ctx, indication, sn) |
| case *oop.Indication_OmciInd: |
| span, ctx := log.CreateChildSpan(ctx, "omci-indication", log.Fields{"device-id": dh.device.Id}) |
| defer span.Finish() |
| |
| omciInd := indication.GetOmciInd() |
| logger.Debugw(ctx, "received-omci-indication", log.Fields{"intf-id": omciInd.IntfId, "onu-id": omciInd.OnuId, "device-id": dh.device.Id}) |
| go func() { |
| if err := dh.omciIndication(ctx, omciInd); err != nil { |
| _ = olterrors.NewErrAdapter("handle-indication-error", log.Fields{"type": "omci", "device-id": dh.device.Id}, err).Log() |
| } |
| }() |
| case *oop.Indication_PktInd: |
| span, ctx := log.CreateChildSpan(ctx, "packet-indication", log.Fields{"device-id": dh.device.Id}) |
| defer span.Finish() |
| |
| pktInd := indication.GetPktInd() |
| logger.Debugw(ctx, "received-packet-indication", log.Fields{ |
| "intf-type": pktInd.IntfId, |
| "intf-id": pktInd.IntfId, |
| "gem-port-id": pktInd.GemportId, |
| "port-no": pktInd.PortNo, |
| "device-id": dh.device.Id, |
| }) |
| |
| if logger.V(log.DebugLevel) { |
| logger.Debugw(ctx, "received-packet-indication-packet", log.Fields{ |
| "intf-type": pktInd.IntfId, |
| "intf-id": pktInd.IntfId, |
| "gem-port-id": pktInd.GemportId, |
| "port-no": pktInd.PortNo, |
| "packet": hex.EncodeToString(pktInd.Pkt), |
| "device-id": dh.device.Id, |
| }) |
| } |
| |
| go func() { |
| if err := dh.handlePacketIndication(ctx, pktInd); err != nil { |
| _ = olterrors.NewErrAdapter("handle-indication-error", log.Fields{"type": "packet", "device-id": dh.device.Id}, err).Log() |
| } |
| }() |
| case *oop.Indication_PortStats: |
| span, ctx := log.CreateChildSpan(ctx, "port-statistics-indication", log.Fields{"device-id": dh.device.Id}) |
| defer span.Finish() |
| |
| portStats := indication.GetPortStats() |
| go dh.portStats.PortStatisticsIndication(ctx, portStats, dh.totalPonPorts) |
| case *oop.Indication_FlowStats: |
| span, ctx := log.CreateChildSpan(ctx, "flow-stats-indication", log.Fields{"device-id": dh.device.Id}) |
| defer span.Finish() |
| |
| flowStats := indication.GetFlowStats() |
| logger.Infow(ctx, "received-flow-stats", log.Fields{"FlowStats": flowStats, "device-id": dh.device.Id}) |
| case *oop.Indication_AlarmInd: |
| span, ctx := log.CreateChildSpan(ctx, "alarm-indication", log.Fields{"device-id": dh.device.Id}) |
| defer span.Finish() |
| |
| alarmInd := indication.GetAlarmInd() |
| logger.Infow(ctx, "received-alarm-indication", log.Fields{"AlarmInd": alarmInd, "device-id": dh.device.Id}) |
| go dh.eventMgr.ProcessEvents(ctx, alarmInd, dh.device.Id, raisedTs) |
| } |
| } |
| |
| // doStateUp handle the olt up indication and update to voltha core |
| func (dh *DeviceHandler) doStateUp(ctx context.Context) error { |
| //starting the stat collector |
| go startCollector(ctx, dh) |
| |
| // Synchronous call to update device state - this method is run in its own go routine |
| if err := dh.coreProxy.DeviceStateUpdate(ctx, dh.device.Id, voltha.ConnectStatus_REACHABLE, |
| voltha.OperStatus_ACTIVE); err != nil { |
| return olterrors.NewErrAdapter("device-update-failed", log.Fields{"device-id": dh.device.Id}, err) |
| } |
| |
| //Clear olt communication failure event |
| dh.device.ConnectStatus = voltha.ConnectStatus_REACHABLE |
| dh.device.OperStatus = voltha.OperStatus_ACTIVE |
| raisedTs := time.Now().UnixNano() |
| go dh.eventMgr.oltCommunicationEvent(ctx, dh.device, raisedTs) |
| |
| return nil |
| } |
| |
| // doStateDown handle the olt down indication |
| func (dh *DeviceHandler) doStateDown(ctx context.Context) error { |
| logger.Debugw(ctx, "do-state-down-start", log.Fields{"device-id": dh.device.Id}) |
| |
| device, err := dh.coreProxy.GetDevice(ctx, dh.device.Id, dh.device.Id) |
| if err != nil || device == nil { |
| /*TODO: needs to handle error scenarios */ |
| return olterrors.NewErrNotFound("device", log.Fields{"device-id": dh.device.Id}, err) |
| } |
| |
| cloned := proto.Clone(device).(*voltha.Device) |
| |
| //Update the device oper state and connection status |
| cloned.OperStatus = voltha.OperStatus_UNKNOWN |
| dh.lockDevice.Lock() |
| dh.device = cloned |
| dh.lockDevice.Unlock() |
| |
| if err = dh.coreProxy.DeviceStateUpdate(ctx, cloned.Id, cloned.ConnectStatus, cloned.OperStatus); err != nil { |
| return olterrors.NewErrAdapter("state-update-failed", log.Fields{"device-id": device.Id}, err) |
| } |
| |
| //get the child device for the parent device |
| onuDevices, err := dh.coreProxy.GetChildDevices(ctx, dh.device.Id) |
| if err != nil { |
| return olterrors.NewErrAdapter("child-device-fetch-failed", log.Fields{"device-id": dh.device.Id}, err) |
| } |
| for _, onuDevice := range onuDevices.Items { |
| // Update onu state as down in onu adapter |
| onuInd := oop.OnuIndication{} |
| onuInd.OperState = "down" |
| err := dh.AdapterProxy.SendInterAdapterMessage(ctx, &onuInd, ic.InterAdapterMessageType_ONU_IND_REQUEST, |
| dh.openOLT.config.Topic, onuDevice.Type, onuDevice.Id, onuDevice.ProxyAddress.DeviceId, "") |
| if err != nil { |
| _ = olterrors.NewErrCommunication("inter-adapter-send-failed", log.Fields{ |
| "source": dh.openOLT.config.Topic, |
| "onu-indicator": onuInd, |
| "device-type": onuDevice.Type, |
| "device-id": onuDevice.Id}, err).LogAt(log.ErrorLevel) |
| //Do not return here and continue to process other ONUs |
| } else { |
| logger.Debugw(ctx, "sending inter adapter down ind to onu success", log.Fields{"olt-device-id": device.Id, "onu-device-id": onuDevice.Id}) |
| } |
| } |
| dh.lockDevice.Lock() |
| /* Discovered ONUs entries need to be cleared , since after OLT |
| is up, it starts sending discovery indications again*/ |
| dh.discOnus = sync.Map{} |
| dh.lockDevice.Unlock() |
| |
| logger.Debugw(ctx, "do-state-down-end", log.Fields{"device-id": device.Id}) |
| return nil |
| } |
| |
| // doStateInit dial the grpc before going to init state |
| func (dh *DeviceHandler) doStateInit(ctx context.Context) error { |
| var err error |
| // Use Intercepters to automatically inject and publish Open Tracing Spans by this GRPC client |
| dh.clientCon, err = grpc.Dial(dh.device.GetHostAndPort(), |
| grpc.WithInsecure(), |
| grpc.WithBlock(), |
| grpc.WithStreamInterceptor(grpc_middleware.ChainStreamClient( |
| grpc_opentracing.StreamClientInterceptor(grpc_opentracing.WithTracer(log.ActiveTracerProxy{})), |
| )), |
| grpc.WithUnaryInterceptor(grpc_middleware.ChainUnaryClient( |
| grpc_opentracing.UnaryClientInterceptor(grpc_opentracing.WithTracer(log.ActiveTracerProxy{})), |
| ))) |
| |
| if err != nil { |
| return olterrors.NewErrCommunication("dial-failure", log.Fields{ |
| "device-id": dh.device.Id, |
| "host-and-port": dh.device.GetHostAndPort()}, err) |
| } |
| return nil |
| } |
| |
| // postInit create olt client instance to invoke RPC on the olt device |
| func (dh *DeviceHandler) postInit(ctx context.Context) error { |
| dh.Client = oop.NewOpenoltClient(dh.clientCon) |
| dh.transitionMap.Handle(ctx, GrpcConnected) |
| return nil |
| } |
| |
| // doStateConnected get the device info and update to voltha core |
| func (dh *DeviceHandler) doStateConnected(ctx context.Context) error { |
| var err error |
| logger.Debugw(ctx, "olt-device-connected", log.Fields{"device-id": dh.device.Id}) |
| |
| // Case where OLT is disabled and then rebooted. |
| device, err := dh.coreProxy.GetDevice(ctx, dh.device.Id, dh.device.Id) |
| if err != nil || device == nil { |
| /*TODO: needs to handle error scenarios */ |
| return olterrors.NewErrAdapter("device-fetch-failed", log.Fields{"device-id": dh.device.Id}, err).LogAt(log.ErrorLevel) |
| } |
| if device.AdminState == voltha.AdminState_DISABLED { |
| logger.Debugln(ctx, "do-state-connected--device-admin-state-down") |
| |
| cloned := proto.Clone(device).(*voltha.Device) |
| cloned.ConnectStatus = voltha.ConnectStatus_REACHABLE |
| cloned.OperStatus = voltha.OperStatus_UNKNOWN |
| dh.device = cloned |
| if err = dh.coreProxy.DeviceStateUpdate(ctx, cloned.Id, cloned.ConnectStatus, cloned.OperStatus); err != nil { |
| return olterrors.NewErrAdapter("device-state-update-failed", log.Fields{"device-id": dh.device.Id}, err).LogAt(log.ErrorLevel) |
| } |
| |
| // Since the device was disabled before the OLT was rebooted, enforce the OLT to be Disabled after re-connection. |
| _, err = dh.Client.DisableOlt(ctx, new(oop.Empty)) |
| if err != nil { |
| return olterrors.NewErrAdapter("olt-disable-failed", log.Fields{"device-id": dh.device.Id}, err).LogAt(log.ErrorLevel) |
| } |
| // We should still go ahead an initialize various device handler modules so that when OLT is re-enabled, we have |
| // all the modules initialized and ready to handle incoming ONUs. |
| |
| err = dh.initializeDeviceHandlerModules(ctx) |
| if err != nil { |
| return olterrors.NewErrAdapter("device-handler-initialization-failed", log.Fields{"device-id": dh.device.Id}, err).LogAt(log.ErrorLevel) |
| } |
| |
| // Start reading indications |
| go func() { |
| if err = dh.readIndications(ctx); err != nil { |
| _ = olterrors.NewErrAdapter("indication-read-failure", log.Fields{"device-id": dh.device.Id}, err).LogAt(log.ErrorLevel) |
| } |
| }() |
| |
| go startHeartbeatCheck(ctx, dh) |
| |
| return nil |
| } |
| |
| ports, err := dh.coreProxy.ListDevicePorts(log.WithSpanFromContext(context.TODO(), ctx), dh.device.Id) |
| if err != nil { |
| /*TODO: needs to handle error scenarios */ |
| return olterrors.NewErrAdapter("fetch-ports-failed", log.Fields{"device-id": dh.device.Id}, err) |
| } |
| dh.populateActivePorts(ctx, ports) |
| if err := dh.disableAdminDownPorts(ctx, ports); err != nil { |
| return olterrors.NewErrAdapter("port-status-update-failed", log.Fields{"ports": ports}, err) |
| } |
| |
| if err := dh.initializeDeviceHandlerModules(ctx); err != nil { |
| return olterrors.NewErrAdapter("device-handler-initialization-failed", log.Fields{"device-id": dh.device.Id}, err).LogAt(log.ErrorLevel) |
| } |
| |
| // Start reading indications |
| go func() { |
| if err := dh.readIndications(ctx); err != nil { |
| _ = olterrors.NewErrAdapter("read-indications-failure", log.Fields{"device-id": dh.device.Id}, err).Log() |
| } |
| }() |
| go dh.updateLocalDevice(ctx) |
| |
| if device.PmConfigs != nil { |
| dh.UpdatePmConfig(ctx, device.PmConfigs) |
| } |
| |
| go startHeartbeatCheck(ctx, dh) |
| |
| return nil |
| } |
| |
| func (dh *DeviceHandler) initializeDeviceHandlerModules(ctx context.Context) error { |
| deviceInfo, err := dh.populateDeviceInfo(ctx) |
| |
| if err != nil { |
| return olterrors.NewErrAdapter("populate-device-info-failed", log.Fields{"device-id": dh.device.Id}, err) |
| } |
| dh.totalPonPorts = deviceInfo.GetPonPorts() |
| |
| // Instantiate resource manager |
| if dh.resourceMgr = rsrcMgr.NewResourceMgr(ctx, dh.device.Id, dh.openOLT.KVStoreAddress, dh.openOLT.KVStoreType, dh.device.Type, deviceInfo, dh.cm.Backend.PathPrefix); dh.resourceMgr == nil { |
| return olterrors.ErrResourceManagerInstantiating |
| } |
| |
| dh.groupMgr = NewGroupManager(ctx, dh, dh.resourceMgr) |
| |
| dh.flowMgr = make([]*OpenOltFlowMgr, dh.totalPonPorts) |
| for i := range dh.flowMgr { |
| // Instantiate flow manager |
| if dh.flowMgr[i] = NewFlowManager(ctx, dh, dh.resourceMgr, dh.groupMgr, uint32(i)); dh.flowMgr[i] == nil { |
| return olterrors.ErrResourceManagerInstantiating |
| } |
| } |
| |
| /* TODO: Instantiate Alarm , stats , BW managers */ |
| /* Instantiating Event Manager to handle Alarms and KPIs */ |
| dh.eventMgr = NewEventMgr(dh.EventProxy, dh) |
| |
| // Stats config for new device |
| dh.portStats = NewOpenOltStatsMgr(ctx, dh) |
| |
| return nil |
| |
| } |
| |
| func (dh *DeviceHandler) populateDeviceInfo(ctx context.Context) (*oop.DeviceInfo, error) { |
| var err error |
| var deviceInfo *oop.DeviceInfo |
| |
| deviceInfo, err = dh.Client.GetDeviceInfo(log.WithSpanFromContext(context.Background(), ctx), new(oop.Empty)) |
| |
| if err != nil { |
| return nil, olterrors.NewErrPersistence("get", "device", 0, nil, err) |
| } |
| if deviceInfo == nil { |
| return nil, olterrors.NewErrInvalidValue(log.Fields{"device": nil}, nil) |
| } |
| |
| logger.Debugw(ctx, "fetched-device-info", log.Fields{"deviceInfo": deviceInfo, "device-id": dh.device.Id}) |
| dh.device.Root = true |
| dh.device.Vendor = deviceInfo.Vendor |
| dh.device.Model = deviceInfo.Model |
| dh.device.SerialNumber = deviceInfo.DeviceSerialNumber |
| dh.device.HardwareVersion = deviceInfo.HardwareVersion |
| dh.device.FirmwareVersion = deviceInfo.FirmwareVersion |
| |
| if deviceInfo.DeviceId == "" { |
| logger.Warnw(ctx, "no-device-id-provided-using-host", log.Fields{"hostport": dh.device.GetHostAndPort()}) |
| host := strings.Split(dh.device.GetHostAndPort(), ":")[0] |
| genmac, err := generateMacFromHost(ctx, host) |
| if err != nil { |
| return nil, olterrors.NewErrAdapter("failed-to-generate-mac-host", log.Fields{"host": host}, err) |
| } |
| logger.Debugw(ctx, "using-host-for-mac-address", log.Fields{"host": host, "mac": genmac}) |
| dh.device.MacAddress = genmac |
| } else { |
| dh.device.MacAddress = deviceInfo.DeviceId |
| } |
| |
| // Synchronous call to update device - this method is run in its own go routine |
| if err := dh.coreProxy.DeviceUpdate(log.WithSpanFromContext(context.TODO(), ctx), dh.device); err != nil { |
| return nil, olterrors.NewErrAdapter("device-update-failed", log.Fields{"device-id": dh.device.Id}, err) |
| } |
| |
| return deviceInfo, nil |
| } |
| |
| func startCollector(ctx context.Context, dh *DeviceHandler) { |
| logger.Debugf(ctx, "starting-collector") |
| for { |
| select { |
| case <-dh.stopCollector: |
| logger.Debugw(ctx, "stopping-collector-for-olt", log.Fields{"device-id": dh.device.Id}) |
| return |
| case <-time.After(time.Duration(dh.metrics.ToPmConfigs().DefaultFreq) * time.Second): |
| |
| ports, err := dh.coreProxy.ListDevicePorts(log.WithSpanFromContext(context.Background(), ctx), dh.device.Id) |
| if err != nil { |
| logger.Warnw(ctx, "failed-to-list-ports", log.Fields{"device-id": dh.device.Id, "error": err}) |
| continue |
| } |
| for _, port := range ports { |
| // NNI Stats |
| if port.Type == voltha.Port_ETHERNET_NNI { |
| intfID := PortNoToIntfID(port.PortNo, voltha.Port_ETHERNET_NNI) |
| cmnni := dh.portStats.collectNNIMetrics(intfID) |
| logger.Debugw(ctx, "collect-nni-metrics", log.Fields{"metrics": cmnni}) |
| go dh.portStats.publishMetrics(ctx, NNIStats, cmnni, port, dh.device.Id, dh.device.Type) |
| logger.Debugw(ctx, "publish-nni-metrics", log.Fields{"nni-port": port.Label}) |
| } |
| // PON Stats |
| if port.Type == voltha.Port_PON_OLT { |
| intfID := PortNoToIntfID(port.PortNo, voltha.Port_PON_OLT) |
| if val, ok := dh.activePorts.Load(intfID); ok && val == true { |
| cmpon := dh.portStats.collectPONMetrics(intfID) |
| logger.Debugw(ctx, "collect-pon-metrics", log.Fields{"metrics": cmpon}) |
| go dh.portStats.publishMetrics(ctx, PONStats, cmpon, port, dh.device.Id, dh.device.Type) |
| } |
| logger.Debugw(ctx, "publish-pon-metrics", log.Fields{"pon-port": port.Label}) |
| |
| //ONU & Gem Stats |
| onuGemInfo := dh.flowMgr[intfID].onuGemInfo |
| if len(onuGemInfo) != 0 { |
| go dh.portStats.collectOnuAndGemStats(ctx, onuGemInfo) |
| } |
| } |
| } |
| } |
| } |
| } |
| |
| //AdoptDevice adopts the OLT device |
| func (dh *DeviceHandler) AdoptDevice(ctx context.Context, device *voltha.Device) { |
| dh.transitionMap = NewTransitionMap(dh) |
| logger.Infow(ctx, "adopt-device", log.Fields{"device-id": device.Id, "Address": device.GetHostAndPort()}) |
| dh.transitionMap.Handle(ctx, DeviceInit) |
| |
| // Now, set the initial PM configuration for that device |
| if err := dh.coreProxy.DevicePMConfigUpdate(ctx, dh.metrics.ToPmConfigs()); err != nil { |
| _ = olterrors.NewErrAdapter("error-updating-performance-metrics", log.Fields{"device-id": device.Id}, err).LogAt(log.ErrorLevel) |
| } |
| } |
| |
| //GetOfpDeviceInfo Gets the Ofp information of the given device |
| func (dh *DeviceHandler) GetOfpDeviceInfo(device *voltha.Device) (*ic.SwitchCapability, error) { |
| return &ic.SwitchCapability{ |
| Desc: &of.OfpDesc{ |
| MfrDesc: "VOLTHA Project", |
| HwDesc: "open_pon", |
| SwDesc: "open_pon", |
| SerialNum: device.SerialNumber, |
| }, |
| SwitchFeatures: &of.OfpSwitchFeatures{ |
| NBuffers: 256, |
| NTables: 2, |
| Capabilities: uint32(of.OfpCapabilities_OFPC_FLOW_STATS | |
| of.OfpCapabilities_OFPC_TABLE_STATS | |
| of.OfpCapabilities_OFPC_PORT_STATS | |
| of.OfpCapabilities_OFPC_GROUP_STATS), |
| }, |
| }, nil |
| } |
| |
| func (dh *DeviceHandler) omciIndication(ctx context.Context, omciInd *oop.OmciIndication) error { |
| logger.Debugw(ctx, "omci-indication", log.Fields{"intf-id": omciInd.IntfId, "onu-id": omciInd.OnuId, "device-id": dh.device.Id}) |
| var deviceType string |
| var deviceID string |
| var proxyDeviceID string |
| |
| transid := extractOmciTransactionID(omciInd.Pkt) |
| if logger.V(log.DebugLevel) { |
| logger.Debugw(ctx, "recv-omci-msg", log.Fields{"intf-id": omciInd.IntfId, "onu-id": omciInd.OnuId, "device-id": dh.device.Id, |
| "omci-transaction-id": transid, "omci-msg": hex.EncodeToString(omciInd.Pkt)}) |
| } |
| |
| onuKey := dh.formOnuKey(omciInd.IntfId, omciInd.OnuId) |
| |
| if onuInCache, ok := dh.onus.Load(onuKey); !ok { |
| |
| logger.Debugw(ctx, "omci-indication-for-a-device-not-in-cache.", log.Fields{"intf-id": omciInd.IntfId, "onu-id": omciInd.OnuId, "device-id": dh.device.Id}) |
| ponPort := IntfIDToPortNo(omciInd.GetIntfId(), voltha.Port_PON_OLT) |
| kwargs := make(map[string]interface{}) |
| kwargs["onu_id"] = omciInd.OnuId |
| kwargs["parent_port_no"] = ponPort |
| |
| onuDevice, err := dh.coreProxy.GetChildDevice(log.WithSpanFromContext(context.TODO(), ctx), dh.device.Id, kwargs) |
| if err != nil { |
| return olterrors.NewErrNotFound("onu", log.Fields{ |
| "intf-id": omciInd.IntfId, |
| "onu-id": omciInd.OnuId}, err) |
| } |
| deviceType = onuDevice.Type |
| deviceID = onuDevice.Id |
| proxyDeviceID = onuDevice.ProxyAddress.DeviceId |
| //if not exist in cache, then add to cache. |
| dh.onus.Store(onuKey, NewOnuDevice(deviceID, deviceType, onuDevice.SerialNumber, omciInd.OnuId, omciInd.IntfId, proxyDeviceID, false)) |
| } else { |
| //found in cache |
| logger.Debugw(ctx, "omci-indication-for-a-device-in-cache.", log.Fields{"intf-id": omciInd.IntfId, "onu-id": omciInd.OnuId, "device-id": dh.device.Id}) |
| deviceType = onuInCache.(*OnuDevice).deviceType |
| deviceID = onuInCache.(*OnuDevice).deviceID |
| proxyDeviceID = onuInCache.(*OnuDevice).proxyDeviceID |
| } |
| |
| omciMsg := &ic.InterAdapterOmciMessage{Message: omciInd.Pkt} |
| if err := dh.AdapterProxy.SendInterAdapterMessage(log.WithSpanFromContext(context.Background(), ctx), omciMsg, |
| ic.InterAdapterMessageType_OMCI_REQUEST, dh.openOLT.config.Topic, deviceType, |
| deviceID, proxyDeviceID, ""); err != nil { |
| return olterrors.NewErrCommunication("omci-request", log.Fields{ |
| "source": dh.openOLT.config.Topic, |
| "destination": deviceType, |
| "onu-id": deviceID, |
| "proxy-device-id": proxyDeviceID}, err) |
| } |
| return nil |
| } |
| |
| //ProcessInterAdapterMessage sends the proxied messages to the target device |
| // If the proxy address is not found in the unmarshalled message, it first fetches the onu device for which the message |
| // is meant, and then send the unmarshalled omci message to this onu |
| func (dh *DeviceHandler) ProcessInterAdapterMessage(ctx context.Context, msg *ic.InterAdapterMessage) error { |
| logger.Debugw(ctx, "process-inter-adapter-message", log.Fields{"msgID": msg.Header.Id}) |
| if msg.Header.Type == ic.InterAdapterMessageType_OMCI_REQUEST { |
| msgID := msg.Header.Id |
| fromTopic := msg.Header.FromTopic |
| toTopic := msg.Header.ToTopic |
| toDeviceID := msg.Header.ToDeviceId |
| proxyDeviceID := msg.Header.ProxyDeviceId |
| |
| logger.Debugw(ctx, "omci-request-message-header", log.Fields{"msgID": msgID, "fromTopic": fromTopic, "toTopic": toTopic, "toDeviceID": toDeviceID, "proxyDeviceID": proxyDeviceID}) |
| |
| msgBody := msg.GetBody() |
| |
| omciMsg := &ic.InterAdapterOmciMessage{} |
| if err := ptypes.UnmarshalAny(msgBody, omciMsg); err != nil { |
| return olterrors.NewErrAdapter("cannot-unmarshal-omci-msg-body", log.Fields{"msgbody": msgBody}, err) |
| } |
| |
| if omciMsg.GetProxyAddress() == nil { |
| onuDevice, err := dh.coreProxy.GetDevice(log.WithSpanFromContext(context.TODO(), ctx), dh.device.Id, toDeviceID) |
| if err != nil { |
| return olterrors.NewErrNotFound("onu", log.Fields{ |
| "device-id": dh.device.Id, |
| "onu-device-id": toDeviceID}, err) |
| } |
| logger.Debugw(ctx, "device-retrieved-from-core", log.Fields{"msgID": msgID, "fromTopic": fromTopic, "toTopic": toTopic, "toDeviceID": toDeviceID, "proxyDeviceID": proxyDeviceID}) |
| if err := dh.sendProxiedMessage(ctx, onuDevice, omciMsg); err != nil { |
| return olterrors.NewErrCommunication("send-failed", log.Fields{ |
| "device-id": dh.device.Id, |
| "onu-device-id": toDeviceID}, err) |
| } |
| } else { |
| logger.Debugw(ctx, "proxy-address-found-in-omci-message", log.Fields{"msgID": msgID, "fromTopic": fromTopic, "toTopic": toTopic, "toDeviceID": toDeviceID, "proxyDeviceID": proxyDeviceID}) |
| if err := dh.sendProxiedMessage(ctx, nil, omciMsg); err != nil { |
| return olterrors.NewErrCommunication("send-failed", log.Fields{ |
| "device-id": dh.device.Id, |
| "onu-device-id": toDeviceID}, err) |
| } |
| } |
| } else { |
| return olterrors.NewErrInvalidValue(log.Fields{"inter-adapter-message-type": msg.Header.Type}, nil) |
| } |
| return nil |
| } |
| |
| func (dh *DeviceHandler) sendProxiedMessage(ctx context.Context, onuDevice *voltha.Device, omciMsg *ic.InterAdapterOmciMessage) error { |
| var intfID uint32 |
| var onuID uint32 |
| var connectStatus common.ConnectStatus_Types |
| if onuDevice != nil { |
| intfID = onuDevice.ProxyAddress.GetChannelId() |
| onuID = onuDevice.ProxyAddress.GetOnuId() |
| connectStatus = onuDevice.ConnectStatus |
| } else { |
| intfID = omciMsg.GetProxyAddress().GetChannelId() |
| onuID = omciMsg.GetProxyAddress().GetOnuId() |
| connectStatus = omciMsg.GetConnectStatus() |
| } |
| if connectStatus != voltha.ConnectStatus_REACHABLE { |
| logger.Debugw(ctx, "onu-not-reachable--cannot-send-omci", log.Fields{"intf-id": intfID, "onu-id": onuID}) |
| |
| return olterrors.NewErrCommunication("unreachable", log.Fields{ |
| "intf-id": intfID, |
| "onu-id": onuID}, nil) |
| } |
| |
| // TODO: OpenOLT Agent oop.OmciMsg expects a hex encoded string for OMCI packets rather than the actual bytes. |
| // Fix this in the agent and then we can pass byte array as Pkt: omciMsg.Message. |
| var omciMessage *oop.OmciMsg |
| hexPkt := make([]byte, hex.EncodedLen(len(omciMsg.Message))) |
| hex.Encode(hexPkt, omciMsg.Message) |
| omciMessage = &oop.OmciMsg{IntfId: intfID, OnuId: onuID, Pkt: hexPkt} |
| |
| // TODO: Below logging illustrates the "stringify" of the omci Pkt. |
| // once above is fixed this log line can change to just use hex.EncodeToString(omciMessage.Pkt) |
| transid := extractOmciTransactionID(omciMsg.Message) |
| logger.Debugw(ctx, "sent-omci-msg", log.Fields{"intf-id": intfID, "onu-id": onuID, |
| "omciTransactionID": transid, "omciMsg": string(omciMessage.Pkt)}) |
| |
| _, err := dh.Client.OmciMsgOut(log.WithSpanFromContext(context.Background(), ctx), omciMessage) |
| if err != nil { |
| return olterrors.NewErrCommunication("omci-send-failed", log.Fields{ |
| "intf-id": intfID, |
| "onu-id": onuID, |
| "message": omciMessage}, err) |
| } |
| return nil |
| } |
| |
| func (dh *DeviceHandler) activateONU(ctx context.Context, intfID uint32, onuID int64, serialNum *oop.SerialNumber, serialNumber string) error { |
| logger.Debugw(ctx, "activate-onu", log.Fields{"intf-id": intfID, "onu-id": onuID, "serialNum": serialNum, "serialNumber": serialNumber, "device-id": dh.device.Id, "OmccEncryption": dh.openOLT.config.OmccEncryption}) |
| if err := dh.flowMgr[intfID].UpdateOnuInfo(ctx, intfID, uint32(onuID), serialNumber); err != nil { |
| return olterrors.NewErrAdapter("onu-activate-failed", log.Fields{"onu": onuID, "intf-id": intfID}, err) |
| } |
| // TODO: need resource manager |
| var pir uint32 = 1000000 |
| Onu := oop.Onu{IntfId: intfID, OnuId: uint32(onuID), SerialNumber: serialNum, Pir: pir, OmccEncryption: dh.openOLT.config.OmccEncryption} |
| if _, err := dh.Client.ActivateOnu(ctx, &Onu); err != nil { |
| st, _ := status.FromError(err) |
| if st.Code() == codes.AlreadyExists { |
| logger.Debugw(ctx, "onu-activation-in-progress", log.Fields{"SerialNumber": serialNumber, "onu-id": onuID, "device-id": dh.device.Id}) |
| |
| } else { |
| return olterrors.NewErrAdapter("onu-activate-failed", log.Fields{"onu": Onu, "device-id": dh.device.Id}, err) |
| } |
| } else { |
| logger.Infow(ctx, "activated-onu", log.Fields{"SerialNumber": serialNumber, "device-id": dh.device.Id}) |
| } |
| return nil |
| } |
| |
| func (dh *DeviceHandler) onuDiscIndication(ctx context.Context, onuDiscInd *oop.OnuDiscIndication, sn string) error { |
| channelID := onuDiscInd.GetIntfId() |
| parentPortNo := IntfIDToPortNo(onuDiscInd.GetIntfId(), voltha.Port_PON_OLT) |
| |
| logger.Infow(ctx, "new-discovery-indication", log.Fields{"sn": sn}) |
| |
| kwargs := make(map[string]interface{}) |
| if sn != "" { |
| kwargs["serial_number"] = sn |
| } else { |
| return olterrors.NewErrInvalidValue(log.Fields{"serial-number": sn}, nil) |
| } |
| |
| var alarmInd oop.OnuAlarmIndication |
| raisedTs := time.Now().UnixNano() |
| if _, loaded := dh.discOnus.LoadOrStore(sn, true); loaded { |
| |
| /* When PON cable disconnected and connected back from OLT, it was expected OnuAlarmIndication |
| with "los_status: off" should be raised but BAL does not raise this Alarm hence manually sending |
| OnuLosClear event on receiving OnuDiscoveryIndication for the Onu after checking whether |
| OnuLosRaise event sent for it */ |
| dh.onus.Range(func(Onukey interface{}, onuInCache interface{}) bool { |
| if onuInCache.(*OnuDevice).serialNumber == sn && onuInCache.(*OnuDevice).losRaised { |
| if onuDiscInd.GetIntfId() != onuInCache.(*OnuDevice).intfID { |
| logger.Warnw(ctx, "onu-is-on-a-different-intf-id-now", log.Fields{ |
| "previousIntfId": onuInCache.(*OnuDevice).intfID, |
| "currentIntfId": onuDiscInd.GetIntfId()}) |
| // TODO:: Should we need to ignore raising OnuLosClear event |
| // when onu connected to different PON? |
| } |
| alarmInd.IntfId = onuInCache.(*OnuDevice).intfID |
| alarmInd.OnuId = onuInCache.(*OnuDevice).onuID |
| alarmInd.LosStatus = statusCheckOff |
| go func() { |
| if err := dh.eventMgr.onuAlarmIndication(ctx, &alarmInd, onuInCache.(*OnuDevice).deviceID, raisedTs); err != nil { |
| logger.Debugw(ctx, "indication-failed", log.Fields{"error": err}) |
| } |
| }() |
| } |
| return true |
| }) |
| |
| logger.Warnw(ctx, "onu-sn-is-already-being-processed", log.Fields{"sn": sn}) |
| return nil |
| } |
| |
| var onuID uint32 |
| |
| // check the ONU is already know to the OLT |
| // NOTE the second time the ONU is discovered this should return a device |
| onuDevice, err := dh.coreProxy.GetChildDevice(ctx, dh.device.Id, kwargs) |
| |
| if err != nil { |
| logger.Debugw(ctx, "core-proxy-get-child-device-failed", log.Fields{"parentDevice": dh.device.Id, "err": err, "sn": sn}) |
| if e, ok := status.FromError(err); ok { |
| logger.Debugw(ctx, "core-proxy-get-child-device-failed-with-code", log.Fields{"errCode": e.Code(), "sn": sn}) |
| switch e.Code() { |
| case codes.Internal: |
| // this probably means NOT FOUND, so just create a new device |
| onuDevice = nil |
| case codes.DeadlineExceeded: |
| // if the call times out, cleanup and exit |
| dh.discOnus.Delete(sn) |
| return olterrors.NewErrTimeout("get-child-device", log.Fields{"device-id": dh.device.Id}, err) |
| } |
| } |
| } |
| |
| if onuDevice == nil { |
| // NOTE this should happen a single time, and only if GetChildDevice returns NotFound |
| logger.Debugw(ctx, "creating-new-onu", log.Fields{"sn": sn}) |
| // we need to create a new ChildDevice |
| ponintfid := onuDiscInd.GetIntfId() |
| onuID, err = dh.resourceMgr.GetONUID(ctx, ponintfid) |
| |
| logger.Infow(ctx, "creating-new-onu-got-onu-id", log.Fields{"sn": sn, "onuId": onuID}) |
| |
| if err != nil { |
| // if we can't create an ID in resource manager, |
| // cleanup and exit |
| dh.discOnus.Delete(sn) |
| return olterrors.NewErrAdapter("resource-manager-get-onu-id-failed", log.Fields{ |
| "pon-intf-id": ponintfid, |
| "serial-number": sn}, err) |
| } |
| |
| if onuDevice, err = dh.coreProxy.ChildDeviceDetected(log.WithSpanFromContext(context.TODO(), ctx), dh.device.Id, int(parentPortNo), |
| "", int(channelID), string(onuDiscInd.SerialNumber.GetVendorId()), sn, int64(onuID)); err != nil { |
| dh.discOnus.Delete(sn) |
| dh.resourceMgr.FreeonuID(ctx, ponintfid, []uint32{onuID}) // NOTE I'm not sure this method is actually cleaning up the right thing |
| return olterrors.NewErrAdapter("core-proxy-child-device-detected-failed", log.Fields{ |
| "pon-intf-id": ponintfid, |
| "serial-number": sn}, err) |
| } |
| if err := dh.eventMgr.OnuDiscoveryIndication(ctx, onuDiscInd, dh.device.Id, onuDevice.Id, onuID, sn, time.Now().UnixNano()); err != nil { |
| logger.Warnw(ctx, "discovery-indication-failed", log.Fields{"error": err}) |
| } |
| logger.Infow(ctx, "onu-child-device-added", |
| log.Fields{"onuDevice": onuDevice, |
| "sn": sn, |
| "onu-id": onuID, |
| "device-id": dh.device.Id}) |
| } |
| |
| // we can now use the existing ONU Id |
| onuID = onuDevice.ProxyAddress.OnuId |
| //Insert the ONU into cache to use in OnuIndication. |
| //TODO: Do we need to remove this from the cache on ONU change, or wait for overwritten on next discovery. |
| logger.Debugw(ctx, "onu-discovery-indication-key-create", |
| log.Fields{"onu-id": onuID, |
| "intfId": onuDiscInd.GetIntfId(), |
| "sn": sn}) |
| onuKey := dh.formOnuKey(onuDiscInd.GetIntfId(), onuID) |
| |
| onuDev := NewOnuDevice(onuDevice.Id, onuDevice.Type, onuDevice.SerialNumber, onuID, onuDiscInd.GetIntfId(), onuDevice.ProxyAddress.DeviceId, false) |
| dh.onus.Store(onuKey, onuDev) |
| logger.Debugw(ctx, "new-onu-device-discovered", |
| log.Fields{"onu": onuDev, |
| "sn": sn}) |
| |
| if err := dh.coreProxy.DeviceStateUpdate(ctx, onuDevice.Id, common.ConnectStatus_REACHABLE, common.OperStatus_DISCOVERED); err != nil { |
| return olterrors.NewErrAdapter("failed-to-update-device-state", log.Fields{ |
| "device-id": onuDevice.Id, |
| "serial-number": sn}, err) |
| } |
| logger.Infow(ctx, "onu-discovered-reachable", log.Fields{"device-id": onuDevice.Id, "sn": sn}) |
| if err := dh.activateONU(ctx, onuDiscInd.IntfId, int64(onuID), onuDiscInd.SerialNumber, sn); err != nil { |
| return olterrors.NewErrAdapter("onu-activation-failed", log.Fields{ |
| "device-id": onuDevice.Id, |
| "serial-number": sn}, err) |
| } |
| return nil |
| } |
| |
| func (dh *DeviceHandler) onuIndication(ctx context.Context, onuInd *oop.OnuIndication, serialNumber string) error { |
| |
| kwargs := make(map[string]interface{}) |
| ponPort := IntfIDToPortNo(onuInd.GetIntfId(), voltha.Port_PON_OLT) |
| var onuDevice *voltha.Device |
| var err error |
| foundInCache := false |
| logger.Debugw(ctx, "onu-indication-key-create", |
| log.Fields{"onuId": onuInd.OnuId, |
| "intfId": onuInd.GetIntfId(), |
| "device-id": dh.device.Id}) |
| onuKey := dh.formOnuKey(onuInd.GetIntfId(), onuInd.OnuId) |
| |
| errFields := log.Fields{"device-id": dh.device.Id} |
| |
| if onuInCache, ok := dh.onus.Load(onuKey); ok { |
| |
| //If ONU id is discovered before then use GetDevice to get onuDevice because it is cheaper. |
| foundInCache = true |
| errFields["onu-id"] = onuInCache.(*OnuDevice).deviceID |
| onuDevice, err = dh.coreProxy.GetDevice(ctx, dh.device.Id, onuInCache.(*OnuDevice).deviceID) |
| } else { |
| //If ONU not found in adapter cache then we have to use GetChildDevice to get onuDevice |
| if serialNumber != "" { |
| kwargs["serial_number"] = serialNumber |
| errFields["serial-number"] = serialNumber |
| } else { |
| kwargs["onu_id"] = onuInd.OnuId |
| kwargs["parent_port_no"] = ponPort |
| errFields["onu-id"] = onuInd.OnuId |
| errFields["parent-port-no"] = ponPort |
| } |
| onuDevice, err = dh.coreProxy.GetChildDevice(log.WithSpanFromContext(context.TODO(), ctx), dh.device.Id, kwargs) |
| } |
| |
| if err != nil || onuDevice == nil { |
| return olterrors.NewErrNotFound("onu-device", errFields, err) |
| } |
| |
| if onuDevice.ParentPortNo != ponPort { |
| logger.Warnw(ctx, "onu-is-on-a-different-intf-id-now", log.Fields{ |
| "previousIntfId": onuDevice.ParentPortNo, |
| "currentIntfId": ponPort}) |
| } |
| |
| if onuDevice.ProxyAddress.OnuId != onuInd.OnuId { |
| logger.Warnw(ctx, "onu-id-mismatch-possible-if-voltha-and-olt-rebooted", log.Fields{ |
| "expected-onu-id": onuDevice.ProxyAddress.OnuId, |
| "received-onu-id": onuInd.OnuId, |
| "device-id": dh.device.Id}) |
| } |
| if !foundInCache { |
| onuKey := dh.formOnuKey(onuInd.GetIntfId(), onuInd.GetOnuId()) |
| |
| dh.onus.Store(onuKey, NewOnuDevice(onuDevice.Id, onuDevice.Type, onuDevice.SerialNumber, onuInd.GetOnuId(), onuInd.GetIntfId(), onuDevice.ProxyAddress.DeviceId, false)) |
| |
| } |
| if onuInd.OperState == "down" && onuInd.FailReason != oop.OnuIndication_ONU_ACTIVATION_FAIL_REASON_NONE { |
| if err := dh.eventMgr.onuActivationIndication(ctx, onuActivationFailEvent, onuInd, dh.device.Id, time.Now().UnixNano()); err != nil { |
| logger.Warnw(ctx, "onu-activation-indication-reporting-failed", log.Fields{"error": err}) |
| } |
| } |
| if err := dh.updateOnuStates(ctx, onuDevice, onuInd); err != nil { |
| return olterrors.NewErrCommunication("state-update-failed", errFields, err) |
| } |
| return nil |
| } |
| |
| func (dh *DeviceHandler) updateOnuStates(ctx context.Context, onuDevice *voltha.Device, onuInd *oop.OnuIndication) error { |
| logger.Debugw(ctx, "onu-indication-for-state", log.Fields{"onuIndication": onuInd, "device-id": onuDevice.Id, "operStatus": onuDevice.OperStatus, "adminStatus": onuDevice.AdminState}) |
| if onuInd.AdminState == "down" || onuInd.OperState == "down" { |
| // The ONU has gone admin_state "down" or oper_state "down" - we expect the ONU to send discovery again |
| // The ONU admin_state is "up" while "oper_state" is down in cases where ONU activation fails. In this case |
| // the ONU sends Discovery again. |
| dh.discOnus.Delete(onuDevice.SerialNumber) |
| // Tests have shown that we sometimes get OperState as NOT down even if AdminState is down, forcing it |
| if onuInd.OperState != "down" { |
| logger.Warnw(ctx, "onu-admin-state-down", log.Fields{"operState": onuInd.OperState}) |
| onuInd.OperState = "down" |
| } |
| } |
| |
| switch onuInd.OperState { |
| case "down": |
| logger.Debugw(ctx, "sending-interadapter-onu-indication", log.Fields{"onuIndication": onuInd, "device-id": onuDevice.Id, "operStatus": onuDevice.OperStatus, "adminStatus": onuDevice.AdminState}) |
| // TODO NEW CORE do not hardcode adapter name. Handler needs Adapter reference |
| err := dh.AdapterProxy.SendInterAdapterMessage(ctx, onuInd, ic.InterAdapterMessageType_ONU_IND_REQUEST, |
| dh.openOLT.config.Topic, onuDevice.Type, onuDevice.Id, onuDevice.ProxyAddress.DeviceId, "") |
| if err != nil { |
| return olterrors.NewErrCommunication("inter-adapter-send-failed", log.Fields{ |
| "onu-indicator": onuInd, |
| "source": dh.openOLT.config.Topic, |
| "device-type": onuDevice.Type, |
| "device-id": onuDevice.Id}, err) |
| } |
| case "up": |
| logger.Debugw(ctx, "sending-interadapter-onu-indication", log.Fields{"onuIndication": onuInd, "device-id": onuDevice.Id, "operStatus": onuDevice.OperStatus, "adminStatus": onuDevice.AdminState}) |
| // TODO NEW CORE do not hardcode adapter name. Handler needs Adapter reference |
| err := dh.AdapterProxy.SendInterAdapterMessage(ctx, onuInd, ic.InterAdapterMessageType_ONU_IND_REQUEST, |
| dh.openOLT.config.Topic, onuDevice.Type, onuDevice.Id, onuDevice.ProxyAddress.DeviceId, "") |
| if err != nil { |
| return olterrors.NewErrCommunication("inter-adapter-send-failed", log.Fields{ |
| "onu-indicator": onuInd, |
| "source": dh.openOLT.config.Topic, |
| "device-type": onuDevice.Type, |
| "device-id": onuDevice.Id}, err) |
| } |
| default: |
| return olterrors.NewErrInvalidValue(log.Fields{"oper-state": onuInd.OperState}, nil) |
| } |
| return nil |
| } |
| |
| func (dh *DeviceHandler) stringifySerialNumber(serialNum *oop.SerialNumber) string { |
| if serialNum != nil { |
| return string(serialNum.VendorId) + dh.stringifyVendorSpecific(serialNum.VendorSpecific) |
| } |
| return "" |
| } |
| func (dh *DeviceHandler) deStringifySerialNumber(serialNum string) (*oop.SerialNumber, error) { |
| decodedStr, err := hex.DecodeString(serialNum[4:]) |
| if err != nil { |
| return nil, err |
| } |
| return &oop.SerialNumber{ |
| VendorId: []byte(serialNum[:4]), |
| VendorSpecific: decodedStr, |
| }, nil |
| } |
| |
| func (dh *DeviceHandler) stringifyVendorSpecific(vendorSpecific []byte) string { |
| tmp := fmt.Sprintf("%x", (uint32(vendorSpecific[0])>>4)&0x0f) + |
| fmt.Sprintf("%x", uint32(vendorSpecific[0]&0x0f)) + |
| fmt.Sprintf("%x", (uint32(vendorSpecific[1])>>4)&0x0f) + |
| fmt.Sprintf("%x", (uint32(vendorSpecific[1]))&0x0f) + |
| fmt.Sprintf("%x", (uint32(vendorSpecific[2])>>4)&0x0f) + |
| fmt.Sprintf("%x", (uint32(vendorSpecific[2]))&0x0f) + |
| fmt.Sprintf("%x", (uint32(vendorSpecific[3])>>4)&0x0f) + |
| fmt.Sprintf("%x", (uint32(vendorSpecific[3]))&0x0f) |
| return tmp |
| } |
| |
| //UpdateFlowsBulk upates the bulk flow |
| func (dh *DeviceHandler) UpdateFlowsBulk() error { |
| return olterrors.ErrNotImplemented |
| } |
| |
| //GetChildDevice returns the child device for given parent port and onu id |
| func (dh *DeviceHandler) GetChildDevice(ctx context.Context, parentPort, onuID uint32) (*voltha.Device, error) { |
| logger.Debugw(ctx, "getchilddevice", |
| log.Fields{"pon-port": parentPort, |
| "onu-id": onuID, |
| "device-id": dh.device.Id}) |
| kwargs := make(map[string]interface{}) |
| kwargs["onu_id"] = onuID |
| kwargs["parent_port_no"] = parentPort |
| onuDevice, err := dh.coreProxy.GetChildDevice(log.WithSpanFromContext(context.TODO(), ctx), dh.device.Id, kwargs) |
| if err != nil { |
| return nil, olterrors.NewErrNotFound("onu-device", log.Fields{ |
| "intf-id": parentPort, |
| "onu-id": onuID}, err) |
| } |
| logger.Debugw(ctx, "successfully-received-child-device-from-core", log.Fields{"child-device-id": onuDevice.Id, "child-device-sn": onuDevice.SerialNumber}) |
| return onuDevice, nil |
| } |
| |
| // SendPacketInToCore sends packet-in to core |
| // For this, it calls SendPacketIn of the core-proxy which uses a device specific topic to send the request. |
| // The adapter handling the device creates a device specific topic |
| func (dh *DeviceHandler) SendPacketInToCore(ctx context.Context, logicalPort uint32, packetPayload []byte) error { |
| if logger.V(log.DebugLevel) { |
| logger.Debugw(ctx, "send-packet-in-to-core", log.Fields{ |
| "port": logicalPort, |
| "packet": hex.EncodeToString(packetPayload), |
| "device-id": dh.device.Id, |
| }) |
| } |
| if err := dh.coreProxy.SendPacketIn(log.WithSpanFromContext(context.TODO(), ctx), dh.device.Id, logicalPort, packetPayload); err != nil { |
| return olterrors.NewErrCommunication("packet-send-failed", log.Fields{ |
| "source": "adapter", |
| "destination": "core", |
| "device-id": dh.device.Id, |
| "logical-port": logicalPort, |
| "packet": hex.EncodeToString(packetPayload)}, err) |
| } |
| if logger.V(log.DebugLevel) { |
| logger.Debugw(ctx, "sent-packet-in-to-core-successfully", log.Fields{ |
| "packet": hex.EncodeToString(packetPayload), |
| "device-id": dh.device.Id, |
| }) |
| } |
| return nil |
| } |
| |
| // UpdatePmConfig updates the pm metrics. |
| func (dh *DeviceHandler) UpdatePmConfig(ctx context.Context, pmConfigs *voltha.PmConfigs) { |
| logger.Infow(ctx, "update-pm-configs", log.Fields{"device-id": dh.device.Id, "pm-configs": pmConfigs}) |
| |
| if pmConfigs.DefaultFreq != dh.metrics.ToPmConfigs().DefaultFreq { |
| dh.metrics.UpdateFrequency(pmConfigs.DefaultFreq) |
| logger.Debugf(ctx, "frequency-updated") |
| } |
| |
| if !pmConfigs.Grouped { |
| metrics := dh.metrics.GetSubscriberMetrics() |
| for _, m := range pmConfigs.Metrics { |
| metrics[m.Name].Enabled = m.Enabled |
| |
| } |
| } |
| } |
| |
| //UpdateFlowsIncrementally updates the device flow |
| func (dh *DeviceHandler) UpdateFlowsIncrementally(ctx context.Context, device *voltha.Device, flows *of.FlowChanges, groups *of.FlowGroupChanges, flowMetadata *voltha.FlowMetadata) error { |
| logger.Debugw(ctx, "received-incremental-flowupdate-in-device-handler", log.Fields{"device-id": device.Id, "flows": flows, "groups": groups, "flowMetadata": flowMetadata}) |
| |
| var err error |
| var errorsList []error |
| |
| if flows != nil { |
| for _, flow := range flows.ToRemove.Items { |
| ponIf := dh.getPonIfFromFlow(flow) |
| |
| logger.Debugw(ctx, "removing-flow", |
| log.Fields{"device-id": device.Id, |
| "ponIf": ponIf, |
| "flowToRemove": flow}) |
| if flow_utils.HasGroup(flow) { |
| err = dh.RouteMcastFlowOrGroupMsgToChannel(ctx, flow, nil, McastFlowOrGroupRemove) |
| } else { |
| err = dh.flowMgr[ponIf].RouteFlowToOnuChannel(ctx, flow, false, nil) |
| } |
| if err != nil { |
| errorsList = append(errorsList, err) |
| } |
| } |
| |
| for _, flow := range flows.ToAdd.Items { |
| ponIf := dh.getPonIfFromFlow(flow) |
| logger.Debugw(ctx, "adding-flow", |
| log.Fields{"device-id": device.Id, |
| "ponIf": ponIf, |
| "flowToAdd": flow}) |
| if flow_utils.HasGroup(flow) { |
| err = dh.RouteMcastFlowOrGroupMsgToChannel(ctx, flow, nil, McastFlowOrGroupAdd) |
| } else { |
| err = dh.flowMgr[ponIf].RouteFlowToOnuChannel(ctx, flow, true, flowMetadata) |
| } |
| if err != nil { |
| errorsList = append(errorsList, err) |
| } |
| } |
| } |
| |
| // Whether we need to synchronize multicast group adds and modifies like flow add and delete needs to be investigated |
| if groups != nil { |
| for _, group := range groups.ToAdd.Items { |
| // err = dh.groupMgr.AddGroup(ctx, group) |
| err = dh.RouteMcastFlowOrGroupMsgToChannel(ctx, nil, group, McastFlowOrGroupAdd) |
| if err != nil { |
| errorsList = append(errorsList, err) |
| } |
| } |
| for _, group := range groups.ToUpdate.Items { |
| // err = dh.groupMgr.ModifyGroup(ctx, group) |
| err = dh.RouteMcastFlowOrGroupMsgToChannel(ctx, nil, group, McastFlowOrGroupModify) |
| if err != nil { |
| errorsList = append(errorsList, err) |
| } |
| } |
| for _, group := range groups.ToRemove.Items { |
| // err = dh.groupMgr.DeleteGroup(ctx, group) |
| err = dh.RouteMcastFlowOrGroupMsgToChannel(ctx, nil, group, McastFlowOrGroupRemove) |
| if err != nil { |
| errorsList = append(errorsList, err) |
| } |
| } |
| } |
| if len(errorsList) > 0 { |
| return fmt.Errorf("errors-installing-flows-groups, errors:%v", errorsList) |
| } |
| logger.Debugw(ctx, "updated-flows-incrementally-successfully", log.Fields{"device-id": dh.device.Id}) |
| return nil |
| } |
| |
| //DisableDevice disables the given device |
| //It marks the following for the given device: |
| //Device-Handler Admin-State : down |
| //Device Port-State: UNKNOWN |
| //Device Oper-State: UNKNOWN |
| func (dh *DeviceHandler) DisableDevice(ctx context.Context, device *voltha.Device) error { |
| /* On device disable ,admin state update has to be done prior sending request to agent since |
| the indication thread may processes invalid indications of ONU and OLT*/ |
| if dh.Client != nil { |
| if _, err := dh.Client.DisableOlt(log.WithSpanFromContext(context.Background(), ctx), new(oop.Empty)); err != nil { |
| if e, ok := status.FromError(err); ok && e.Code() == codes.Internal { |
| return olterrors.NewErrAdapter("olt-disable-failed", log.Fields{"device-id": device.Id}, err) |
| } |
| } |
| } |
| logger.Debugw(ctx, "olt-disabled", log.Fields{"device-id": device.Id}) |
| /* Discovered ONUs entries need to be cleared , since on device disable the child devices goes to |
| UNREACHABLE state which needs to be configured again*/ |
| |
| dh.discOnus = sync.Map{} |
| dh.onus = sync.Map{} |
| |
| //stopping the stats collector |
| dh.stopCollector <- true |
| |
| go dh.notifyChildDevices(ctx, "unreachable") |
| cloned := proto.Clone(device).(*voltha.Device) |
| //Update device Admin state |
| dh.device = cloned |
| // Update the all pon ports state on that device to disable and NNI remains active as NNI remains active in openolt agent. |
| if err := dh.coreProxy.PortsStateUpdate(log.WithSpanFromContext(context.TODO(), ctx), cloned.Id, ^uint32(1<<voltha.Port_PON_OLT), voltha.OperStatus_UNKNOWN); err != nil { |
| return olterrors.NewErrAdapter("ports-state-update-failed", log.Fields{"device-id": device.Id}, err) |
| } |
| logger.Debugw(ctx, "disable-device-end", log.Fields{"device-id": device.Id}) |
| return nil |
| } |
| |
| func (dh *DeviceHandler) notifyChildDevices(ctx context.Context, state string) { |
| // Update onu state as unreachable in onu adapter |
| onuInd := oop.OnuIndication{} |
| onuInd.OperState = state |
| //get the child device for the parent device |
| onuDevices, err := dh.coreProxy.GetChildDevices(log.WithSpanFromContext(context.TODO(), ctx), dh.device.Id) |
| if err != nil { |
| logger.Errorw(ctx, "failed-to-get-child-devices-information", log.Fields{"device-id": dh.device.Id, "error": err}) |
| } |
| if onuDevices != nil { |
| for _, onuDevice := range onuDevices.Items { |
| err := dh.AdapterProxy.SendInterAdapterMessage(log.WithSpanFromContext(context.TODO(), ctx), &onuInd, ic.InterAdapterMessageType_ONU_IND_REQUEST, |
| dh.openOLT.config.Topic, onuDevice.Type, onuDevice.Id, onuDevice.ProxyAddress.DeviceId, "") |
| if err != nil { |
| logger.Errorw(ctx, "failed-to-send-inter-adapter-message", log.Fields{"OnuInd": onuInd, |
| "From Adapter": dh.openOLT.config.Topic, "DeviceType": onuDevice.Type, "device-id": onuDevice.Id}) |
| } |
| |
| } |
| } |
| |
| } |
| |
| //ReenableDevice re-enables the olt device after disable |
| //It marks the following for the given device: |
| //Device-Handler Admin-State : up |
| //Device Port-State: ACTIVE |
| //Device Oper-State: ACTIVE |
| func (dh *DeviceHandler) ReenableDevice(ctx context.Context, device *voltha.Device) error { |
| if _, err := dh.Client.ReenableOlt(log.WithSpanFromContext(context.Background(), ctx), new(oop.Empty)); err != nil { |
| if e, ok := status.FromError(err); ok && e.Code() == codes.Internal { |
| return olterrors.NewErrAdapter("olt-reenable-failed", log.Fields{"device-id": dh.device.Id}, err) |
| } |
| } |
| logger.Debug(ctx, "olt-reenabled") |
| |
| // Update the all ports state on that device to enable |
| |
| ports, err := dh.coreProxy.ListDevicePorts(ctx, device.Id) |
| if err != nil { |
| return olterrors.NewErrAdapter("list-ports-failed", log.Fields{"device-id": device.Id}, err) |
| } |
| if err := dh.disableAdminDownPorts(ctx, ports); err != nil { |
| return olterrors.NewErrAdapter("port-status-update-failed-after-olt-reenable", log.Fields{"device": device}, err) |
| } |
| //Update the device oper status as ACTIVE |
| device.OperStatus = voltha.OperStatus_ACTIVE |
| dh.device = device |
| |
| if err := dh.coreProxy.DeviceStateUpdate(log.WithSpanFromContext(context.TODO(), ctx), device.Id, device.ConnectStatus, device.OperStatus); err != nil { |
| return olterrors.NewErrAdapter("state-update-failed", log.Fields{ |
| "device-id": device.Id, |
| "connect-status": device.ConnectStatus, |
| "oper-status": device.OperStatus}, err) |
| } |
| |
| logger.Debugw(ctx, "reenabledevice-end", log.Fields{"device-id": device.Id}) |
| |
| return nil |
| } |
| |
| func (dh *DeviceHandler) clearUNIData(ctx context.Context, onu *rsrcMgr.OnuGemInfo) error { |
| var uniID uint32 |
| var err error |
| for _, port := range onu.UniPorts { |
| uniID = UniIDFromPortNum(port) |
| logger.Debugw(ctx, "clearing-resource-data-for-uni-port", log.Fields{"port": port, "uni-id": uniID}) |
| /* Delete tech-profile instance from the KV store */ |
| if err = dh.flowMgr[onu.IntfID].DeleteTechProfileInstances(ctx, onu.IntfID, onu.OnuID, uniID); err != nil { |
| logger.Debugw(ctx, "failed-to-remove-tech-profile-instance-for-onu", log.Fields{"onu-id": onu.OnuID}) |
| } |
| logger.Debugw(ctx, "deleted-tech-profile-instance-for-onu", log.Fields{"onu-id": onu.OnuID}) |
| tpIDList := dh.resourceMgr.GetTechProfileIDForOnu(ctx, onu.IntfID, onu.OnuID, uniID) |
| for _, tpID := range tpIDList { |
| if err = dh.resourceMgr.RemoveMeterIDForOnu(ctx, "upstream", onu.IntfID, onu.OnuID, uniID, tpID); err != nil { |
| logger.Debugw(ctx, "failed-to-remove-meter-id-for-onu-upstream", log.Fields{"onu-id": onu.OnuID}) |
| } |
| logger.Debugw(ctx, "removed-meter-id-for-onu-upstream", log.Fields{"onu-id": onu.OnuID}) |
| if err = dh.resourceMgr.RemoveMeterIDForOnu(ctx, "downstream", onu.IntfID, onu.OnuID, uniID, tpID); err != nil { |
| logger.Debugw(ctx, "failed-to-remove-meter-id-for-onu-downstream", log.Fields{"onu-id": onu.OnuID}) |
| } |
| logger.Debugw(ctx, "removed-meter-id-for-onu-downstream", log.Fields{"onu-id": onu.OnuID}) |
| } |
| dh.resourceMgr.FreePONResourcesForONU(ctx, onu.IntfID, onu.OnuID, uniID) |
| if err = dh.resourceMgr.RemoveTechProfileIDsForOnu(ctx, onu.IntfID, onu.OnuID, uniID); err != nil { |
| logger.Debugw(ctx, "failed-to-remove-tech-profile-id-for-onu", log.Fields{"onu-id": onu.OnuID}) |
| } |
| logger.Debugw(ctx, "removed-tech-profile-id-for-onu", log.Fields{"onu-id": onu.OnuID}) |
| if err = dh.resourceMgr.DeletePacketInGemPortForOnu(ctx, onu.IntfID, onu.OnuID, port); err != nil { |
| logger.Debugw(ctx, "failed-to-remove-gemport-pkt-in", log.Fields{"intfid": onu.IntfID, "onuid": onu.OnuID, "uniId": uniID}) |
| } |
| if err = dh.resourceMgr.RemoveAllFlowsForIntfOnuUniKey(ctx, onu.IntfID, int32(onu.OnuID), int32(uniID)); err != nil { |
| logger.Debugw(ctx, "failed-to-remove-flow-for", log.Fields{"intfid": onu.IntfID, "onuid": onu.OnuID, "uniId": uniID}) |
| } |
| } |
| return nil |
| } |
| |
| func (dh *DeviceHandler) clearNNIData(ctx context.Context) error { |
| nniUniID := -1 |
| nniOnuID := -1 |
| |
| if dh.resourceMgr == nil { |
| return olterrors.NewErrNotFound("resource-manager", log.Fields{"device-id": dh.device.Id}, nil) |
| } |
| //Free the flow-ids for the NNI port |
| nni, err := dh.resourceMgr.GetNNIFromKVStore(ctx) |
| if err != nil { |
| return olterrors.NewErrPersistence("get", "nni", 0, nil, err) |
| } |
| logger.Debugw(ctx, "nni-", log.Fields{"nni": nni}) |
| for _, nniIntfID := range nni { |
| dh.resourceMgr.RemoveResourceMap(ctx, nniIntfID, int32(nniOnuID), int32(nniUniID)) |
| _ = dh.resourceMgr.RemoveAllFlowsForIntfOnuUniKey(ctx, nniIntfID, -1, -1) |
| |
| } |
| if err = dh.resourceMgr.DelNNiFromKVStore(ctx); err != nil { |
| return olterrors.NewErrPersistence("clear", "nni", 0, nil, err) |
| } |
| |
| return nil |
| } |
| |
| // DeleteDevice deletes the device instance from openolt handler array. Also clears allocated resource manager resources. Also reboots the OLT hardware! |
| func (dh *DeviceHandler) DeleteDevice(ctx context.Context, device *voltha.Device) error { |
| logger.Debug(ctx, "function-entry-delete-device") |
| /* Clear the KV store data associated with the all the UNI ports |
| This clears up flow data and also resource map data for various |
| other pon resources like alloc_id and gemport_id |
| */ |
| go dh.cleanupDeviceResources(ctx) |
| logger.Debug(ctx, "removed-device-from-Resource-manager-KV-store") |
| // Stop the Stats collector |
| dh.stopCollector <- true |
| // stop the heartbeat check routine |
| dh.stopHeartbeatCheck <- true |
| dh.lockDevice.RLock() |
| // Stop the read indication only if it the routine is active |
| if dh.isReadIndicationRoutineActive { |
| dh.stopIndications <- true |
| } |
| dh.lockDevice.RUnlock() |
| //Reset the state |
| if dh.Client != nil { |
| if _, err := dh.Client.Reboot(ctx, new(oop.Empty)); err != nil { |
| return olterrors.NewErrAdapter("olt-reboot-failed", log.Fields{"device-id": dh.device.Id}, err).Log() |
| } |
| } |
| // There is no need to update the core about operation status and connection status of the OLT. |
| // The OLT is getting deleted anyway and the core might have already cleared the OLT device from its DB. |
| // So any attempt to update the operation status and connection status of the OLT will result in core throwing an error back, |
| // because the device does not exist in DB. |
| return nil |
| } |
| func (dh *DeviceHandler) cleanupDeviceResources(ctx context.Context) { |
| |
| if dh.resourceMgr != nil { |
| var ponPort uint32 |
| for ponPort = 0; ponPort < dh.totalPonPorts; ponPort++ { |
| var onuGemData []rsrcMgr.OnuGemInfo |
| err := dh.resourceMgr.ResourceMgrs[ponPort].GetOnuGemInfo(ctx, ponPort, &onuGemData) |
| if err != nil { |
| _ = olterrors.NewErrNotFound("onu", log.Fields{ |
| "device-id": dh.device.Id, |
| "pon-port": ponPort}, err).Log() |
| } |
| for _, onu := range onuGemData { |
| onuID := make([]uint32, 1) |
| logger.Debugw(ctx, "onu-data", log.Fields{"onu": onu}) |
| if err = dh.clearUNIData(ctx, &onu); err != nil { |
| logger.Errorw(ctx, "failed-to-clear-data-for-onu", log.Fields{"onu-device": onu}) |
| } |
| // Clear flowids for gem cache. |
| for _, gem := range onu.GemPorts { |
| dh.resourceMgr.DeleteFlowIDsForGem(ctx, ponPort, gem) |
| } |
| onuID[0] = onu.OnuID |
| dh.resourceMgr.FreeonuID(ctx, ponPort, onuID) |
| } |
| dh.resourceMgr.DeleteIntfIDGempMapPath(ctx, ponPort) |
| onuGemData = nil |
| err = dh.resourceMgr.DelOnuGemInfoForIntf(ctx, ponPort) |
| if err != nil { |
| logger.Errorw(ctx, "failed-to-update-onugem-info", log.Fields{"intfid": ponPort, "onugeminfo": onuGemData}) |
| } |
| } |
| /* Clear the flows from KV store associated with NNI port. |
| There are mostly trap rules from NNI port (like LLDP) |
| */ |
| if err := dh.clearNNIData(ctx); err != nil { |
| logger.Errorw(ctx, "failed-to-clear-data-for-NNI-port", log.Fields{"device-id": dh.device.Id}) |
| } |
| |
| /* Clear the resource pool for each PON port in the background */ |
| go func() { |
| if err := dh.resourceMgr.Delete(ctx); err != nil { |
| logger.Debug(ctx, err) |
| } |
| }() |
| } |
| |
| /*Delete ONU map for the device*/ |
| dh.onus.Range(func(key interface{}, value interface{}) bool { |
| dh.onus.Delete(key) |
| return true |
| }) |
| |
| /*Delete discovered ONU map for the device*/ |
| dh.discOnus.Range(func(key interface{}, value interface{}) bool { |
| dh.discOnus.Delete(key) |
| return true |
| }) |
| } |
| |
| //RebootDevice reboots the given device |
| func (dh *DeviceHandler) RebootDevice(ctx context.Context, device *voltha.Device) error { |
| if _, err := dh.Client.Reboot(log.WithSpanFromContext(context.Background(), ctx), new(oop.Empty)); err != nil { |
| return olterrors.NewErrAdapter("olt-reboot-failed", log.Fields{"device-id": dh.device.Id}, err) |
| } |
| logger.Debugw(ctx, "rebooted-device-successfully", log.Fields{"device-id": device.Id}) |
| return nil |
| } |
| |
| func (dh *DeviceHandler) handlePacketIndication(ctx context.Context, packetIn *oop.PacketIndication) error { |
| if logger.V(log.DebugLevel) { |
| logger.Debugw(ctx, "received-packet-in", log.Fields{ |
| "packet-indication": *packetIn, |
| "device-id": dh.device.Id, |
| "packet": hex.EncodeToString(packetIn.Pkt), |
| }) |
| } |
| logicalPortNum, err := dh.flowMgr[packetIn.IntfId].GetLogicalPortFromPacketIn(ctx, packetIn) |
| if err != nil { |
| return olterrors.NewErrNotFound("logical-port", log.Fields{"packet": hex.EncodeToString(packetIn.Pkt)}, err) |
| } |
| if logger.V(log.DebugLevel) { |
| logger.Debugw(ctx, "sending-packet-in-to-core", log.Fields{ |
| "logical-port-num": logicalPortNum, |
| "device-id": dh.device.Id, |
| "packet": hex.EncodeToString(packetIn.Pkt), |
| }) |
| } |
| |
| if err := dh.coreProxy.SendPacketIn(log.WithSpanFromContext(context.TODO(), ctx), dh.device.Id, logicalPortNum, packetIn.Pkt); err != nil { |
| return olterrors.NewErrCommunication("send-packet-in", log.Fields{ |
| "destination": "core", |
| "source": dh.device.Type, |
| "device-id": dh.device.Id, |
| "packet": hex.EncodeToString(packetIn.Pkt), |
| }, err) |
| } |
| |
| if logger.V(log.DebugLevel) { |
| logger.Debugw(ctx, "success-sending-packet-in-to-core!", log.Fields{ |
| "packet": hex.EncodeToString(packetIn.Pkt), |
| "device-id": dh.device.Id, |
| }) |
| } |
| return nil |
| } |
| |
| // PacketOut sends packet-out from VOLTHA to OLT on the egress port provided |
| func (dh *DeviceHandler) PacketOut(ctx context.Context, egressPortNo int, packet *of.OfpPacketOut) error { |
| if logger.V(log.DebugLevel) { |
| logger.Debugw(ctx, "incoming-packet-out", log.Fields{ |
| "device-id": dh.device.Id, |
| "egress-port-no": egressPortNo, |
| "pkt-length": len(packet.Data), |
| "packet": hex.EncodeToString(packet.Data), |
| }) |
| } |
| |
| egressPortType := IntfIDToPortTypeName(uint32(egressPortNo)) |
| if egressPortType == voltha.Port_ETHERNET_UNI { |
| outerEthType := (uint16(packet.Data[12]) << 8) | uint16(packet.Data[13]) |
| innerEthType := (uint16(packet.Data[16]) << 8) | uint16(packet.Data[17]) |
| if outerEthType == 0x8942 || outerEthType == 0x88cc { |
| // Do not packet-out lldp packets on uni port. |
| // ONOS has no clue about uni/nni ports, it just packets out on all |
| // available ports on the Logical Switch. It should not be interested |
| // in the UNI links. |
| logger.Debugw(ctx, "dropping-lldp-packet-out-on-uni", log.Fields{ |
| "device-id": dh.device.Id, |
| }) |
| return nil |
| } |
| if outerEthType == 0x88a8 || outerEthType == 0x8100 { |
| if innerEthType == 0x8100 { |
| // q-in-q 802.1ad or 802.1q double tagged packet. |
| // slice out the outer tag. |
| packet.Data = append(packet.Data[:12], packet.Data[16:]...) |
| if logger.V(log.DebugLevel) { |
| logger.Debugw(ctx, "packet-now-single-tagged", log.Fields{ |
| "packet-data": hex.EncodeToString(packet.Data), |
| "device-id": dh.device.Id, |
| }) |
| } |
| } |
| } |
| intfID := IntfIDFromUniPortNum(uint32(egressPortNo)) |
| onuID := OnuIDFromPortNum(uint32(egressPortNo)) |
| uniID := UniIDFromPortNum(uint32(egressPortNo)) |
| |
| gemPortID, err := dh.flowMgr[intfID].GetPacketOutGemPortID(ctx, intfID, onuID, uint32(egressPortNo), packet.Data) |
| if err != nil { |
| // In this case the openolt agent will receive the gemPortID as 0. |
| // The agent tries to retrieve the gemPortID in this case. |
| // This may not always succeed at the agent and packetOut may fail. |
| logger.Errorw(ctx, "failed-to-retrieve-gemport-id-for-packet-out", log.Fields{ |
| "intf-id": intfID, |
| "onu-id": onuID, |
| "uni-id": uniID, |
| "packet": hex.EncodeToString(packet.Data), |
| "device-id": dh.device.Id, |
| }) |
| } |
| |
| onuPkt := oop.OnuPacket{IntfId: intfID, OnuId: onuID, PortNo: uint32(egressPortNo), GemportId: gemPortID, Pkt: packet.Data} |
| if logger.V(log.DebugLevel) { |
| logger.Debugw(ctx, "sending-packet-to-onu", log.Fields{ |
| "egress-port-no": egressPortNo, |
| "intf-id": intfID, |
| "onu-id": onuID, |
| "uni-id": uniID, |
| "gem-port-id": gemPortID, |
| "packet": hex.EncodeToString(packet.Data), |
| "device-id": dh.device.Id, |
| }) |
| } |
| |
| if _, err := dh.Client.OnuPacketOut(ctx, &onuPkt); err != nil { |
| return olterrors.NewErrCommunication("packet-out-send", log.Fields{ |
| "source": "adapter", |
| "destination": "onu", |
| "egress-port-number": egressPortNo, |
| "intf-id": intfID, |
| "oni-id": onuID, |
| "uni-id": uniID, |
| "gem-port-id": gemPortID, |
| "packet": hex.EncodeToString(packet.Data), |
| "device-id": dh.device.Id, |
| }, err) |
| } |
| } else if egressPortType == voltha.Port_ETHERNET_NNI { |
| nniIntfID, err := IntfIDFromNniPortNum(ctx, uint32(egressPortNo)) |
| if err != nil { |
| return olterrors.NewErrInvalidValue(log.Fields{ |
| "egress-nni-port": egressPortNo, |
| "device-id": dh.device.Id, |
| }, err) |
| } |
| uplinkPkt := oop.UplinkPacket{IntfId: nniIntfID, Pkt: packet.Data} |
| |
| if logger.V(log.DebugLevel) { |
| logger.Debugw(ctx, "sending-packet-to-nni", log.Fields{ |
| "uplink-pkt": uplinkPkt, |
| "packet": hex.EncodeToString(packet.Data), |
| "device-id": dh.device.Id, |
| }) |
| } |
| |
| if _, err := dh.Client.UplinkPacketOut(ctx, &uplinkPkt); err != nil { |
| return olterrors.NewErrCommunication("packet-out-to-nni", log.Fields{ |
| "packet": hex.EncodeToString(packet.Data), |
| "device-id": dh.device.Id, |
| }, err) |
| } |
| } else { |
| logger.Warnw(ctx, "packet-out-to-this-interface-type-not-implemented", log.Fields{ |
| "egress-port-no": egressPortNo, |
| "egressPortType": egressPortType, |
| "packet": hex.EncodeToString(packet.Data), |
| "device-id": dh.device.Id, |
| }) |
| } |
| return nil |
| } |
| |
| func (dh *DeviceHandler) formOnuKey(intfID, onuID uint32) string { |
| return "" + strconv.Itoa(int(intfID)) + "." + strconv.Itoa(int(onuID)) |
| } |
| |
| func startHeartbeatCheck(ctx context.Context, dh *DeviceHandler) { |
| |
| // start the heartbeat check towards the OLT. |
| var timerCheck *time.Timer |
| |
| for { |
| heartbeatTimer := time.NewTimer(dh.openOLT.HeartbeatCheckInterval) |
| select { |
| case <-heartbeatTimer.C: |
| ctxWithTimeout, cancel := context.WithTimeout(log.WithSpanFromContext(context.Background(), ctx), dh.openOLT.GrpcTimeoutInterval) |
| if heartBeat, err := dh.Client.HeartbeatCheck(ctxWithTimeout, new(oop.Empty)); err != nil { |
| logger.Warnw(ctx, "hearbeat-failed", log.Fields{"device-id": dh.device.Id}) |
| if timerCheck == nil { |
| // start a after func, when expired will update the state to the core |
| timerCheck = time.AfterFunc(dh.openOLT.HeartbeatFailReportInterval, func() { dh.updateStateUnreachable(ctx) }) |
| } |
| } else { |
| if timerCheck != nil { |
| if timerCheck.Stop() { |
| logger.Debugw(ctx, "got-hearbeat-within-timeout", log.Fields{"device-id": dh.device.Id}) |
| } |
| timerCheck = nil |
| } |
| logger.Debugw(ctx, "hearbeat", |
| log.Fields{"signature": heartBeat, |
| "device-id": dh.device.Id}) |
| } |
| cancel() |
| case <-dh.stopHeartbeatCheck: |
| logger.Debugw(ctx, "stopping-heart-beat-check", log.Fields{"device-id": dh.device.Id}) |
| return |
| } |
| } |
| } |
| |
| func (dh *DeviceHandler) updateStateUnreachable(ctx context.Context) { |
| device, err := dh.coreProxy.GetDevice(ctx, dh.device.Id, dh.device.Id) |
| if err != nil || device == nil { |
| // One case where we have seen core returning an error for GetDevice call is after OLT device delete. |
| // After OLT delete, the adapter asks for OLT to reboot. When OLT is rebooted, shortly we loose heartbeat. |
| // The 'startHeartbeatCheck' then asks the device to be marked unreachable towards the core, but the core |
| // has already deleted the device and returns error. In this particular scenario, it is Ok because any necessary |
| // cleanup in the adapter was already done during DeleteDevice API handler routine. |
| _ = olterrors.NewErrNotFound("device", log.Fields{"device-id": dh.device.Id}, err).Log() |
| // Immediately return, otherwise accessing a null 'device' struct would cause panic |
| return |
| } |
| |
| if device.ConnectStatus == voltha.ConnectStatus_REACHABLE { |
| if err = dh.coreProxy.DeviceStateUpdate(ctx, dh.device.Id, voltha.ConnectStatus_UNREACHABLE, voltha.OperStatus_UNKNOWN); err != nil { |
| _ = olterrors.NewErrAdapter("device-state-update-failed", log.Fields{"device-id": dh.device.Id}, err).LogAt(log.ErrorLevel) |
| } |
| if err = dh.coreProxy.PortsStateUpdate(ctx, dh.device.Id, 0, voltha.OperStatus_UNKNOWN); err != nil { |
| _ = olterrors.NewErrAdapter("port-update-failed", log.Fields{"device-id": dh.device.Id}, err).Log() |
| } |
| |
| //raise olt communication failure event |
| raisedTs := time.Now().UnixNano() |
| device.ConnectStatus = voltha.ConnectStatus_UNREACHABLE |
| device.OperStatus = voltha.OperStatus_UNKNOWN |
| go dh.eventMgr.oltCommunicationEvent(ctx, device, raisedTs) |
| |
| go dh.cleanupDeviceResources(ctx) |
| |
| dh.lockDevice.RLock() |
| // Stop the read indication only if it the routine is active |
| // The read indication would have already stopped due to failure on the gRPC stream following OLT going unreachable |
| // Sending message on the 'stopIndication' channel again will cause the readIndication routine to immediately stop |
| // on next execution of the readIndication routine. |
| if dh.isReadIndicationRoutineActive { |
| dh.stopIndications <- true |
| } |
| dh.lockDevice.RUnlock() |
| |
| dh.transitionMap.Handle(ctx, DeviceInit) |
| |
| } |
| } |
| |
| // EnablePort to enable Pon interface |
| func (dh *DeviceHandler) EnablePort(ctx context.Context, port *voltha.Port) error { |
| logger.Debugw(ctx, "enable-port", log.Fields{"Device": dh.device, "port": port}) |
| return dh.modifyPhyPort(ctx, port, true) |
| } |
| |
| // DisablePort to disable pon interface |
| func (dh *DeviceHandler) DisablePort(ctx context.Context, port *voltha.Port) error { |
| logger.Debugw(ctx, "disable-port", log.Fields{"Device": dh.device, "port": port}) |
| return dh.modifyPhyPort(ctx, port, false) |
| } |
| |
| //modifyPhyPort is common function to enable and disable the port. parm :enablePort, true to enablePort and false to disablePort. |
| func (dh *DeviceHandler) modifyPhyPort(ctx context.Context, port *voltha.Port, enablePort bool) error { |
| logger.Infow(ctx, "modifyPhyPort", log.Fields{"port": port, "Enable": enablePort, "device-id": dh.device.Id}) |
| if port.GetType() == voltha.Port_ETHERNET_NNI { |
| // Bug is opened for VOL-2505 to support NNI disable feature. |
| logger.Infow(ctx, "voltha-supports-single-nni-hence-disable-of-nni-not-allowed", |
| log.Fields{"device": dh.device, "port": port}) |
| return olterrors.NewErrAdapter("illegal-port-request", log.Fields{ |
| "port-type": port.GetType, |
| "enable-state": enablePort}, nil) |
| } |
| // fetch interfaceid from PortNo |
| ponID := PortNoToIntfID(port.GetPortNo(), voltha.Port_PON_OLT) |
| ponIntf := &oop.Interface{IntfId: ponID} |
| var operStatus voltha.OperStatus_Types |
| if enablePort { |
| operStatus = voltha.OperStatus_ACTIVE |
| out, err := dh.Client.EnablePonIf(ctx, ponIntf) |
| |
| if err != nil { |
| return olterrors.NewErrAdapter("pon-port-enable-failed", log.Fields{ |
| "device-id": dh.device.Id, |
| "port": port}, err) |
| } |
| // updating interface local cache for collecting stats |
| dh.activePorts.Store(ponID, true) |
| logger.Infow(ctx, "enabled-pon-port", log.Fields{"out": out, "device-id": dh.device, "Port": port}) |
| } else { |
| operStatus = voltha.OperStatus_UNKNOWN |
| out, err := dh.Client.DisablePonIf(ctx, ponIntf) |
| if err != nil { |
| return olterrors.NewErrAdapter("pon-port-disable-failed", log.Fields{ |
| "device-id": dh.device.Id, |
| "port": port}, err) |
| } |
| // updating interface local cache for collecting stats |
| dh.activePorts.Store(ponID, false) |
| logger.Infow(ctx, "disabled-pon-port", log.Fields{"out": out, "device-id": dh.device, "Port": port}) |
| } |
| if err := dh.coreProxy.PortStateUpdate(ctx, dh.device.Id, voltha.Port_PON_OLT, port.PortNo, operStatus); err != nil { |
| return olterrors.NewErrAdapter("port-state-update-failed", log.Fields{ |
| "device-id": dh.device.Id, |
| "port": port.PortNo}, err) |
| } |
| return nil |
| } |
| |
| //disableAdminDownPorts disables the ports, if the corresponding port Adminstate is disabled on reboot and Renable device. |
| func (dh *DeviceHandler) disableAdminDownPorts(ctx context.Context, ports []*voltha.Port) error { |
| // Disable the port and update the oper_port_status to core |
| // if the Admin state of the port is disabled on reboot and re-enable device. |
| for _, port := range ports { |
| if port.AdminState == common.AdminState_DISABLED { |
| if err := dh.DisablePort(ctx, port); err != nil { |
| return olterrors.NewErrAdapter("port-disable-failed", log.Fields{ |
| "device-id": dh.device.Id, |
| "port": port}, err) |
| } |
| } |
| } |
| return nil |
| } |
| |
| //populateActivePorts to populate activePorts map |
| func (dh *DeviceHandler) populateActivePorts(ctx context.Context, ports []*voltha.Port) { |
| logger.Infow(ctx, "populateActivePorts", log.Fields{"device-id": dh.device.Id}) |
| for _, port := range ports { |
| if port.Type == voltha.Port_ETHERNET_NNI { |
| if port.OperStatus == voltha.OperStatus_ACTIVE { |
| dh.activePorts.Store(PortNoToIntfID(port.PortNo, voltha.Port_ETHERNET_NNI), true) |
| } else { |
| dh.activePorts.Store(PortNoToIntfID(port.PortNo, voltha.Port_ETHERNET_NNI), false) |
| } |
| } |
| if port.Type == voltha.Port_PON_OLT { |
| if port.OperStatus == voltha.OperStatus_ACTIVE { |
| dh.activePorts.Store(PortNoToIntfID(port.PortNo, voltha.Port_PON_OLT), true) |
| } else { |
| dh.activePorts.Store(PortNoToIntfID(port.PortNo, voltha.Port_PON_OLT), false) |
| } |
| } |
| } |
| } |
| |
| // ChildDeviceLost deletes ONU and clears pon resources related to it. |
| func (dh *DeviceHandler) ChildDeviceLost(ctx context.Context, pPortNo uint32, onuID uint32) error { |
| logger.Debugw(ctx, "child-device-lost", log.Fields{"parent-device-id": dh.device.Id}) |
| intfID := PortNoToIntfID(pPortNo, voltha.Port_PON_OLT) |
| onuKey := dh.formOnuKey(intfID, onuID) |
| onuDevice, ok := dh.onus.Load(onuKey) |
| if !ok { |
| return olterrors.NewErrAdapter("failed-to-load-onu-details", |
| log.Fields{ |
| "device-id": dh.device.Id, |
| "onu-id": onuID, |
| "intf-id": intfID}, nil).Log() |
| } |
| var sn *oop.SerialNumber |
| var err error |
| if sn, err = dh.deStringifySerialNumber(onuDevice.(*OnuDevice).serialNumber); err != nil { |
| return olterrors.NewErrAdapter("failed-to-destringify-serial-number", |
| log.Fields{ |
| "devicer-id": dh.device.Id, |
| "serial-number": onuDevice.(*OnuDevice).serialNumber}, err).Log() |
| } |
| |
| onu := &oop.Onu{IntfId: intfID, OnuId: onuID, SerialNumber: sn} |
| if _, err := dh.Client.DeleteOnu(log.WithSpanFromContext(context.Background(), ctx), onu); err != nil { |
| return olterrors.NewErrAdapter("failed-to-delete-onu", log.Fields{ |
| "device-id": dh.device.Id, |
| "onu-id": onuID}, err).Log() |
| } |
| //clear PON resources associated with ONU |
| var onuGemData []rsrcMgr.OnuGemInfo |
| if onuMgr, ok := dh.resourceMgr.ResourceMgrs[intfID]; !ok { |
| logger.Warnw(ctx, "failed-to-get-resource-manager-for-interface-Id", log.Fields{ |
| "device-id": dh.device.Id, |
| "intf-id": intfID}) |
| } else { |
| if err := onuMgr.GetOnuGemInfo(ctx, intfID, &onuGemData); err != nil { |
| logger.Warnw(ctx, "failed-to-get-onu-info-for-pon-port", log.Fields{ |
| "device-id": dh.device.Id, |
| "intf-id": intfID, |
| "error": err}) |
| } else { |
| for i, onu := range onuGemData { |
| if onu.OnuID == onuID && onu.SerialNumber == onuDevice.(*OnuDevice).serialNumber { |
| logger.Debugw(ctx, "onu-data", log.Fields{"onu": onu}) |
| if err := dh.clearUNIData(ctx, &onu); err != nil { |
| logger.Warnw(ctx, "failed-to-clear-uni-data-for-onu", log.Fields{ |
| "device-id": dh.device.Id, |
| "onu-device": onu, |
| "error": err}) |
| } |
| // Clear flowids for gem cache. |
| for _, gem := range onu.GemPorts { |
| dh.resourceMgr.DeleteFlowIDsForGem(ctx, intfID, gem) |
| } |
| onuGemData = append(onuGemData[:i], onuGemData[i+1:]...) |
| err := onuMgr.AddOnuGemInfo(ctx, intfID, onuGemData) |
| if err != nil { |
| logger.Warnw(ctx, "persistence-update-onu-gem-info-failed", log.Fields{ |
| "intf-id": intfID, |
| "onu-device": onu, |
| "onu-gem": onuGemData, |
| "error": err}) |
| //Not returning error on cleanup. |
| } |
| logger.Debugw(ctx, "removed-onu-gem-info", log.Fields{"intf": intfID, "onu-device": onu, "onugem": onuGemData}) |
| dh.resourceMgr.FreeonuID(ctx, intfID, []uint32{onu.OnuID}) |
| break |
| } |
| } |
| } |
| } |
| dh.onus.Delete(onuKey) |
| dh.discOnus.Delete(onuDevice.(*OnuDevice).serialNumber) |
| dh.removeOnuIndicationChannels(ctx, onuDevice.(*OnuDevice).serialNumber) |
| return nil |
| } |
| |
| func getInPortFromFlow(flow *of.OfpFlowStats) uint32 { |
| for _, field := range flow_utils.GetOfbFields(flow) { |
| if field.Type == flow_utils.IN_PORT { |
| return field.GetPort() |
| } |
| } |
| return InvalidPort |
| } |
| |
| func getOutPortFromFlow(flow *of.OfpFlowStats) uint32 { |
| for _, action := range flow_utils.GetActions(flow) { |
| if action.Type == flow_utils.OUTPUT { |
| if out := action.GetOutput(); out != nil { |
| return out.GetPort() |
| } |
| } |
| } |
| return InvalidPort |
| } |
| |
| func getPorts(flow *of.OfpFlowStats) (uint32, uint32) { |
| inPort := getInPortFromFlow(flow) |
| outPort := getOutPortFromFlow(flow) |
| |
| if inPort == InvalidPort || outPort == InvalidPort { |
| return inPort, outPort |
| } |
| |
| if isControllerFlow := IsControllerBoundFlow(outPort); isControllerFlow { |
| /* Get UNI port/ IN Port from tunnel ID field for upstream controller bound flows */ |
| if portType := IntfIDToPortTypeName(inPort); portType == voltha.Port_PON_OLT { |
| if uniPort := flow_utils.GetChildPortFromTunnelId(flow); uniPort != 0 { |
| return uniPort, outPort |
| } |
| } |
| } else { |
| // Downstream flow from NNI to PON port , Use tunnel ID as new OUT port / UNI port |
| if portType := IntfIDToPortTypeName(outPort); portType == voltha.Port_PON_OLT { |
| if uniPort := flow_utils.GetChildPortFromTunnelId(flow); uniPort != 0 { |
| return inPort, uniPort |
| } |
| // Upstream flow from PON to NNI port , Use tunnel ID as new IN port / UNI port |
| } else if portType := IntfIDToPortTypeName(inPort); portType == voltha.Port_PON_OLT { |
| if uniPort := flow_utils.GetChildPortFromTunnelId(flow); uniPort != 0 { |
| return uniPort, outPort |
| } |
| } |
| } |
| |
| return InvalidPort, InvalidPort |
| } |
| |
| func extractOmciTransactionID(omciPkt []byte) uint16 { |
| if len(omciPkt) > 3 { |
| d := omciPkt[0:2] |
| transid := binary.BigEndian.Uint16(d) |
| return transid |
| } |
| return 0 |
| } |
| |
| // StoreOnuDevice stores the onu parameters to the local cache. |
| func (dh *DeviceHandler) StoreOnuDevice(onuDevice *OnuDevice) { |
| onuKey := dh.formOnuKey(onuDevice.intfID, onuDevice.onuID) |
| dh.onus.Store(onuKey, onuDevice) |
| } |
| |
| func (dh *DeviceHandler) getExtValue(ctx context.Context, device *voltha.Device, value voltha.ValueType_Type) (*voltha.ReturnValues, error) { |
| var err error |
| var sn *oop.SerialNumber |
| var ID uint32 |
| resp := new(voltha.ReturnValues) |
| valueparam := new(oop.ValueParam) |
| ctx = log.WithSpanFromContext(context.Background(), ctx) |
| logger.Infow(ctx, "getExtValue", log.Fields{"onu-id": device.Id, "pon-intf": device.ParentPortNo}) |
| if sn, err = dh.deStringifySerialNumber(device.SerialNumber); err != nil { |
| return nil, err |
| } |
| ID = device.ProxyAddress.GetOnuId() |
| Onu := oop.Onu{IntfId: device.ParentPortNo, OnuId: ID, SerialNumber: sn} |
| valueparam.Onu = &Onu |
| valueparam.Value = value |
| |
| // This API is unsupported until agent patch is added |
| resp.Unsupported = uint32(value) |
| _ = ctx |
| |
| // Uncomment this code once agent changes are complete and tests |
| /* |
| resp, err = dh.Client.GetValue(ctx, valueparam) |
| if err != nil { |
| logger.Errorw("error-while-getValue", log.Fields{"DeviceID": dh.device, "onu-id": onuid, "error": err}) |
| return nil, err |
| } |
| */ |
| |
| logger.Infow(ctx, "get-ext-value", log.Fields{"resp": resp, "device-id": dh.device, "onu-id": device.Id, "pon-intf": device.ParentPortNo}) |
| return resp, nil |
| } |
| |
| func (dh *DeviceHandler) getPonIfFromFlow(flow *of.OfpFlowStats) uint32 { |
| // Default to PON0 |
| var intfID uint32 |
| inPort, outPort := getPorts(flow) |
| if inPort != InvalidPort && outPort != InvalidPort { |
| _, intfID, _, _ = ExtractAccessFromFlow(inPort, outPort) |
| } |
| return intfID |
| } |
| |
| func (dh *DeviceHandler) getOnuIndicationChannel(ctx context.Context, sn string) chan perOnuIndication { |
| dh.perOnuChannelLock.Lock() |
| if ch, ok := dh.perOnuChannel[sn]; ok { |
| dh.perOnuChannelLock.Unlock() |
| return ch.indicationChannel |
| } |
| channels := onuIndicationChannels{ |
| //We create a buffered channel here to avoid calling function to be blocked |
| //in case of multiple indications from the same ONU, |
| //especially in the case where indications are buffered in OLT. |
| indicationChannel: make(chan perOnuIndication, 5), |
| stopChannel: make(chan struct{}), |
| } |
| dh.perOnuChannel[sn] = channels |
| dh.perOnuChannelLock.Unlock() |
| go dh.perOnuIndicationsRoutine(&channels) |
| return channels.indicationChannel |
| |
| } |
| |
| func (dh *DeviceHandler) removeOnuIndicationChannels(ctx context.Context, sn string) { |
| logger.Debugw(ctx, "remove-onu-indication-channels", log.Fields{"sn": sn}) |
| dh.perOnuChannelLock.Lock() |
| defer dh.perOnuChannelLock.Unlock() |
| if ch, ok := dh.perOnuChannel[sn]; ok { |
| close(ch.stopChannel) |
| delete(dh.perOnuChannel, sn) |
| } |
| |
| } |
| |
| func (dh *DeviceHandler) putOnuIndicationToChannel(ctx context.Context, indication *oop.Indication, sn string) { |
| ind := perOnuIndication{ |
| ctx: ctx, |
| indication: indication, |
| serialNumber: sn, |
| } |
| logger.Debugw(ctx, "put-onu-indication-to-channel", log.Fields{"indication": indication, "sn": sn}) |
| // Send the onuIndication on the ONU channel |
| dh.getOnuIndicationChannel(ctx, sn) <- ind |
| } |
| |
| func (dh *DeviceHandler) perOnuIndicationsRoutine(onuChannels *onuIndicationChannels) { |
| for { |
| select { |
| // process one indication per onu, before proceeding to the next one |
| case onuInd := <-onuChannels.indicationChannel: |
| logger.Debugw(onuInd.ctx, "calling-indication", log.Fields{"device-id": dh.device.Id, |
| "ind": onuInd.indication, "sn": onuInd.serialNumber}) |
| switch onuInd.indication.Data.(type) { |
| case *oop.Indication_OnuInd: |
| if err := dh.onuIndication(onuInd.ctx, onuInd.indication.GetOnuInd(), onuInd.serialNumber); err != nil { |
| _ = olterrors.NewErrAdapter("handle-indication-error", log.Fields{ |
| "type": "onu-indication", |
| "device-id": dh.device.Id, |
| "sn": onuInd.serialNumber}, err).Log() |
| } |
| case *oop.Indication_OnuDiscInd: |
| if err := dh.onuDiscIndication(onuInd.ctx, onuInd.indication.GetOnuDiscInd(), onuInd.serialNumber); err != nil { |
| _ = olterrors.NewErrAdapter("handle-indication-error", log.Fields{ |
| "type": "onu-discovery", |
| "device-id": dh.device.Id, |
| "sn": onuInd.serialNumber}, err).Log() |
| } |
| } |
| case <-onuChannels.stopChannel: |
| logger.Debugw(context.Background(), "stop-signal-received-for-onu-channel", log.Fields{"device-id": dh.device.Id}) |
| close(onuChannels.indicationChannel) |
| return |
| } |
| } |
| } |
| |
| // RouteMcastFlowOrGroupMsgToChannel routes incoming mcast flow or group to a channel to be handled by the a specific |
| // instance of mcastFlowOrGroupChannelHandlerRoutine meant to handle messages for that group. |
| func (dh *DeviceHandler) RouteMcastFlowOrGroupMsgToChannel(ctx context.Context, flow *voltha.OfpFlowStats, group *voltha.OfpGroupEntry, action string) error { |
| // Step1 : Fill McastFlowOrGroupControlBlock |
| // Step2 : Push the McastFlowOrGroupControlBlock to appropriate channel |
| // Step3 : Wait on response channel for response |
| // Step4 : Return error value |
| logger.Debugw(ctx, "process-flow-or-group", log.Fields{"flow": flow, "group": group, "action": action}) |
| errChan := make(chan error) |
| var groupID uint32 |
| mcastFlowOrGroupCb := McastFlowOrGroupControlBlock{ |
| ctx: ctx, |
| flowOrGroupAction: action, |
| flow: flow, |
| group: group, |
| errChan: &errChan, |
| } |
| if flow != nil { |
| groupID = flow_utils.GetGroup(flow) |
| } else if group != nil { |
| groupID = group.Desc.GroupId |
| } else { |
| return errors.New("flow-and-group-both-nil") |
| } |
| // Derive the appropriate go routine to handle the request by a simple module operation. |
| // There are only MaxNumOfGroupHandlerChannels number of channels to handle the mcast flow or group |
| dh.incomingMcastFlowOrGroup[groupID%MaxNumOfGroupHandlerChannels] <- mcastFlowOrGroupCb |
| // Wait for handler to return error value |
| err := <-errChan |
| logger.Debugw(ctx, "process-flow-or-group--received-resp", log.Fields{"flow": flow, "group": group, "action": action, "err": err}) |
| return err |
| } |
| |
| // mcastFlowOrGroupChannelHandlerRoutine routine to handle incoming mcast flow/group message |
| func (dh *DeviceHandler) mcastFlowOrGroupChannelHandlerRoutine(mcastFlowOrGroupChannel chan McastFlowOrGroupControlBlock) { |
| for { |
| // block on the channel to receive an incoming mcast flow/group |
| // process the flow completely before proceeding to handle the next flow |
| mcastFlowOrGroupCb := <-mcastFlowOrGroupChannel |
| if mcastFlowOrGroupCb.flow != nil { |
| if mcastFlowOrGroupCb.flowOrGroupAction == McastFlowOrGroupAdd { |
| logger.Debugw(mcastFlowOrGroupCb.ctx, "adding-mcast-flow", |
| log.Fields{"device-id": dh.device.Id, |
| "flowToAdd": mcastFlowOrGroupCb.flow}) |
| // The mcast flow is not unique to any particular PON port, so it is OK to default to PON0 |
| err := dh.flowMgr[0].AddFlow(mcastFlowOrGroupCb.ctx, mcastFlowOrGroupCb.flow, nil) |
| // Pass the return value over the return channel |
| *mcastFlowOrGroupCb.errChan <- err |
| } else { // flow remove |
| logger.Debugw(mcastFlowOrGroupCb.ctx, "removing-mcast-flow", |
| log.Fields{"device-id": dh.device.Id, |
| "flowToRemove": mcastFlowOrGroupCb.flow}) |
| // The mcast flow is not unique to any particular PON port, so it is OK to default to PON0 |
| err := dh.flowMgr[0].RemoveFlow(mcastFlowOrGroupCb.ctx, mcastFlowOrGroupCb.flow) |
| // Pass the return value over the return channel |
| *mcastFlowOrGroupCb.errChan <- err |
| } |
| } else { // mcast group |
| if mcastFlowOrGroupCb.flowOrGroupAction == McastFlowOrGroupAdd { |
| logger.Debugw(mcastFlowOrGroupCb.ctx, "adding-mcast-group", |
| log.Fields{"device-id": dh.device.Id, |
| "groupToAdd": mcastFlowOrGroupCb.group}) |
| err := dh.groupMgr.AddGroup(mcastFlowOrGroupCb.ctx, mcastFlowOrGroupCb.group) |
| // Pass the return value over the return channel |
| *mcastFlowOrGroupCb.errChan <- err |
| } else if mcastFlowOrGroupCb.flowOrGroupAction == McastFlowOrGroupModify { // group modify |
| logger.Debugw(mcastFlowOrGroupCb.ctx, "modifying-mcast-group", |
| log.Fields{"device-id": dh.device.Id, |
| "groupToModify": mcastFlowOrGroupCb.group}) |
| err := dh.groupMgr.ModifyGroup(mcastFlowOrGroupCb.ctx, mcastFlowOrGroupCb.group) |
| // Pass the return value over the return channel |
| *mcastFlowOrGroupCb.errChan <- err |
| } else { // group remove |
| logger.Debugw(mcastFlowOrGroupCb.ctx, "removing-mcast-group", |
| log.Fields{"device-id": dh.device.Id, |
| "groupToRemove": mcastFlowOrGroupCb.group}) |
| err := dh.groupMgr.DeleteGroup(mcastFlowOrGroupCb.ctx, mcastFlowOrGroupCb.group) |
| // Pass the return value over the return channel |
| *mcastFlowOrGroupCb.errChan <- err |
| } |
| } |
| } |
| } |
| |
| func (dh *DeviceHandler) getOltPortCounters(ctx context.Context, oltPortInfo *extension.GetOltPortCounters) *extension.SingleGetValueResponse { |
| |
| singleValResp := extension.SingleGetValueResponse{ |
| Response: &extension.GetValueResponse{ |
| Response: &extension.GetValueResponse_PortCoutners{ |
| PortCoutners: &extension.GetOltPortCountersResponse{}, |
| }, |
| }, |
| } |
| |
| errResp := func(status extension.GetValueResponse_Status, |
| reason extension.GetValueResponse_ErrorReason) *extension.SingleGetValueResponse { |
| return &extension.SingleGetValueResponse{ |
| Response: &extension.GetValueResponse{ |
| Status: status, |
| ErrReason: reason, |
| }, |
| } |
| } |
| |
| if oltPortInfo.PortType != extension.GetOltPortCounters_Port_ETHERNET_NNI && |
| oltPortInfo.PortType != extension.GetOltPortCounters_Port_PON_OLT { |
| //send error response |
| logger.Debugw(ctx, "getOltPortCounters invalid portType", log.Fields{"oltPortInfo": oltPortInfo.PortType}) |
| return errResp(extension.GetValueResponse_ERROR, extension.GetValueResponse_INVALID_PORT_TYPE) |
| } |
| statIndChn := make(chan bool, 1) |
| dh.portStats.RegisterForStatIndication(ctx, portStatsType, statIndChn, oltPortInfo.PortNo, oltPortInfo.PortType) |
| defer dh.portStats.DeRegisterFromStatIndication(ctx, portStatsType, statIndChn) |
| //request openOlt agent to send the the port statistics indication |
| |
| go func() { |
| _, err := dh.Client.CollectStatistics(ctx, new(oop.Empty)) |
| if err != nil { |
| logger.Errorw(ctx, "getOltPortCounters CollectStatistics failed ", log.Fields{"err": err}) |
| } |
| }() |
| select { |
| case <-statIndChn: |
| //indication received for ports stats |
| logger.Debugw(ctx, "getOltPortCounters recvd statIndChn", log.Fields{"oltPortInfo": oltPortInfo}) |
| case <-time.After(oltPortInfoTimeout * time.Second): |
| logger.Debugw(ctx, "getOltPortCounters timeout happened", log.Fields{"oltPortInfo": oltPortInfo}) |
| return errResp(extension.GetValueResponse_ERROR, extension.GetValueResponse_TIMEOUT) |
| case <-ctx.Done(): |
| logger.Debugw(ctx, "getOltPortCounters ctx Done ", log.Fields{"oltPortInfo": oltPortInfo}) |
| return errResp(extension.GetValueResponse_ERROR, extension.GetValueResponse_TIMEOUT) |
| } |
| if oltPortInfo.PortType == extension.GetOltPortCounters_Port_ETHERNET_NNI { |
| //get nni stats |
| intfID := PortNoToIntfID(oltPortInfo.PortNo, voltha.Port_ETHERNET_NNI) |
| logger.Debugw(ctx, "getOltPortCounters intfID ", log.Fields{"intfID": intfID}) |
| cmnni := dh.portStats.collectNNIMetrics(intfID) |
| if cmnni == nil { |
| //TODO define the error reason |
| return errResp(extension.GetValueResponse_ERROR, extension.GetValueResponse_INTERNAL_ERROR) |
| } |
| dh.portStats.updateGetOltPortCountersResponse(ctx, &singleValResp, cmnni) |
| return &singleValResp |
| |
| } else if oltPortInfo.PortType == extension.GetOltPortCounters_Port_PON_OLT { |
| // get pon stats |
| intfID := PortNoToIntfID(oltPortInfo.PortNo, voltha.Port_PON_OLT) |
| if val, ok := dh.activePorts.Load(intfID); ok && val == true { |
| cmpon := dh.portStats.collectPONMetrics(intfID) |
| if cmpon == nil { |
| //TODO define the error reason |
| return errResp(extension.GetValueResponse_ERROR, extension.GetValueResponse_INTERNAL_ERROR) |
| } |
| dh.portStats.updateGetOltPortCountersResponse(ctx, &singleValResp, cmpon) |
| return &singleValResp |
| } |
| } |
| return errResp(extension.GetValueResponse_ERROR, extension.GetValueResponse_INTERNAL_ERROR) |
| } |