adaptercore/statsmanager.go - voltha-openolt-adapter - Gitiles

 /*
  * Copyright 2019-present Open Networking Foundation

  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at

  * http://www.apache.org/licenses/LICENSE-2.0

  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */
 package adaptercore

 import (
 	"errors"
 	"fmt"

 	"github.com/opencord/voltha-go/common/log"
 	openolt "github.com/opencord/voltha-protos/go/openolt"
 	"github.com/opencord/voltha-protos/go/voltha"
 )

 type PonPort struct {
 	/*
 	   This is a highly reduced version taken from the adtran pon_port.
 	   TODO: Extend for use in the openolt adapter set.
 	*/
 	/*    MAX_ONUS_SUPPORTED = 256
 	      DEFAULT_ENABLED = False
 	      MAX_DEPLOYMENT_RANGE = 25000  # Meters (OLT-PB maximum)

 	      _MCAST_ONU_ID = 253
 	      _MCAST_ALLOC_BASE = 0x500

 	      _SUPPORTED_ACTIVATION_METHODS = ['autodiscovery']  # , 'autoactivate']
 	      _SUPPORTED_AUTHENTICATION_METHODS = ['serial-number']
 	*/
 	PONID    uint32
 	DeviceID string
 	IntfID   uint32
 	PortNum  uint32
 	PortID   uint32
 	Label    string
 	ONUs     map[uint32]interface{}
 	ONUsByID map[uint32]interface{}

 	RxBytes        uint64
 	RxPackets      uint64
 	RxMcastPackets uint64
 	RxBcastPackets uint64
 	RxErrorPackets uint64
 	TxBytes        uint64
 	TxPackets      uint64
 	TxUcastPackets uint64
 	TxMcastPackets uint64
 	TxBcastPackets uint64
 	TxErrorPackets uint64
 }

 func NewPONPort(PONID uint32, DeviceID string, IntfID uint32, PortNum uint32) *PonPort {

 	var PON PonPort

 	PON.PONID = PONID
 	PON.DeviceID = DeviceID
 	PON.IntfID = IntfID
 	PON.PortNum = PortNum
 	PON.PortID = 0
 	PON.Label = fmt.Sprintf("%s,%d", "pon-", PONID)

 	PON.ONUs = make(map[uint32]interface{})
 	PON.ONUsByID = make(map[uint32]interface{})

 	/*
 	   Statistics  taken from nni_port
 	   self.intf_id = 0  #handled by getter
 	   self.port_no = 0  #handled by getter
 	   self.port_id = 0  #handled by getter

 	   Note:  In the current implementation of the kpis coming from the BAL the stats are the
 	   samne model for NNI and PON.

 	   TODO:   Integrate additional kpis for the PON and other southbound port objecgts.

 	*/

 	PON.RxBytes = 0
 	PON.RxPackets = 0
 	PON.RxMcastPackets = 0
 	PON.RxBcastPackets = 0
 	PON.RxErrorPackets = 0
 	PON.TxBytes = 0
 	PON.TxPackets = 0
 	PON.TxUcastPackets = 0
 	PON.TxMcastPackets = 0
 	PON.TxBcastPackets = 0
 	PON.TxErrorPackets = 0

 	/*    def __str__(self):
 	      return "PonPort-{}: Admin: {}, Oper: {}, OLT: {}".format(self._label,
 	                                                               self._admin_state,
 	                                                               self._oper_status,
 	                                                               self.olt)
 	*/
 	return &PON
 }

 type NniPort struct {
 	/*
 	   Northbound network port, often Ethernet-based

 	   This is a highly reduced version taken from the adtran nni_port code set
 	   TODO:   add functions to allow for port specific values and operations
 	*/
 	PortNum     uint32
 	Name        string
 	LogicalPort uint32
 	IntfID      uint32

 	RxBytes        uint64
 	RxPackets      uint64
 	RxMcastPackets uint64
 	RxBcastPackets uint64
 	RxErrorPackets uint64
 	TxBytes        uint64
 	TxPackets      uint64
 	TxUcastPackets uint64
 	TxMcastPackets uint64
 	TxBcastPackets uint64
 	TxErrorPackets uint64
 }

 func NewNniPort(PortNum uint32, IntfID uint32) *NniPort {

 	var NNI NniPort

 	NNI.PortNum = PortNum
 	NNI.Name = fmt.Sprintf("%s,%d", "nni-", PortNum)
 	NNI.IntfID = IntfID

 	NNI.RxBytes = 0
 	NNI.RxPackets = 0
 	NNI.RxMcastPackets = 0
 	NNI.RxBcastPackets = 0
 	NNI.RxErrorPackets = 0
 	NNI.TxBytes = 0
 	NNI.TxPackets = 0
 	NNI.TxUcastPackets = 0
 	NNI.TxMcastPackets = 0
 	NNI.TxBcastPackets = 0
 	NNI.TxErrorPackets = 0

 	return &NNI
 }

 type OpenOltStatisticsMgr struct {
 	Device         *DeviceHandler
 	NorthBoundPort map[uint32]NniPort
 	SouthBoundPort map[uint32]PonPort
 	// TODO  PMMetrics Metrics
 }

 func NewOpenOltStatsMgr(Dev *DeviceHandler) *OpenOltStatisticsMgr {

 	var StatMgr OpenOltStatisticsMgr

 	StatMgr.Device = Dev
 	// TODO call metric PMMetric =
 	// Northbound and Southbound ports
 	// added to initialize the pm_metrics
 	var Ports interface{}
 	Ports, _ = InitPorts("nni", Dev.deviceId)
 	StatMgr.NorthBoundPort, _ = Ports.(map[uint32]NniPort)
 	Ports, _ = InitPorts("pon", Dev.deviceId)
 	StatMgr.SouthBoundPort, _ = Ports.(map[uint32]PonPort)

 	return &StatMgr
 }

 func InitPorts(Intftype string, DeviceID string) (interface{}, error) {
 	/*
 	     This method collects the port objects:  nni and pon that are updated with the
 	     current data from the OLT

 	     Both the northbound (nni) and southbound ports are indexed by the interface id (intf_id)
 	     and NOT the port number. When the port object is instantiated it will contain the intf_id and
 	     port_no values

 	   :param type:
 	   :return:
 	*/
 	var i uint32
 	if Intftype == "nni" {
 		NniPorts := make(map[uint32]NniPort)
 		for i = 0; i <= 1; i++ {
 			Port := BuildPortObject(i, "nni", DeviceID).(NniPort)
 			NniPorts[Port.IntfID] = Port
 		}
 		return NniPorts, nil
 	} else if Intftype == "pon" {
 		PONPorts := make(map[uint32]PonPort)
 		for i = 0; i <= 16; i++ {
 			PONPort := BuildPortObject(i, "pon", DeviceID).(PonPort)
 			PONPorts[PONPort.IntfID] = PONPort
 		}
 		return PONPorts, nil
 	} else {
 		log.Errorf("Invalid type of interface %s", Intftype)
 		return nil, errors.New("Invalid type of interface ")
 	}
 }

 func BuildPortObject(PortNum uint32, IntfType string, DeviceID string) interface{} {
 	/*
 	   Seperate method to allow for updating north and southbound ports
 	   newly discovered ports and devices

 	   :param port_num:
 	   :param type:
 	   :return:
 	*/

 	//This builds a port object which is added to the
 	//appropriate northbound or southbound values
 	if IntfType == "nni" {
 		IntfID := IntfIdToPortNo(PortNum, voltha.Port_ETHERNET_UNI)
 		return NewNniPort(PortNum, IntfID)
 	} else if IntfType == "pon" {
 		// PON ports require a different configuration
 		//  intf_id and pon_id are currently equal.
 		IntfID := IntfIdToPortNo(PortNum, voltha.Port_ETHERNET_NNI)
 		PONID := IntfID
 		return NewPONPort(PONID, DeviceID, IntfID, PortNum)
 	} else {
 		log.Errorf("Invalid type of interface %s", IntfType)
 		return nil
 	}
 }

 func (StatMgr *OpenOltStatisticsMgr) PortStatisticsIndication(PortStats *openolt.PortStatistics) {
 	log.Debugf("port-stats-collected %v", PortStats)
 	StatMgr.PortsStatisticsKpis(PortStats)
 	// TODO send stats to core topic to the voltha kafka or a different kafka ?
 }

 func FlowStatisticsIndication(self, FlowStats *openolt.FlowStatistics) {
 	log.Debugf("flow-stats-collected %v", FlowStats)
 	//TODO send to kafka ?
 }

 func (StatMgr *OpenOltStatisticsMgr) PortsStatisticsKpis(PortStats *openolt.PortStatistics) {

 	/*map the port stats values into a dictionary
 	  Create a kpoEvent and publish to Kafka

 	  :param port_stats:
 	  :return:
 	*/
 	//var err error
 	IntfID := PortStats.IntfId

 	if (IntfIdToPortNo(0, voltha.Port_ETHERNET_NNI) < IntfID) &&
 		(IntfID < IntfIdToPortNo(4, voltha.Port_ETHERNET_NNI)) {
 		/*
 		   for this release we are only interested in the first NNI for
 		   Northbound.
 		   we are not using the other 3
 		*/
 		return
 	} else {

 		PMData := make(map[string]uint64)
 		PMData["rx_bytes"] = PortStats.RxBytes
 		PMData["rx_packets"] = PortStats.RxPackets
 		PMData["rx_ucast_packets"] = PortStats.RxUcastPackets
 		PMData["rx_mcast_packets"] = PortStats.RxMcastPackets
 		PMData["rx_bcast_packets"] = PortStats.RxBcastPackets
 		PMData["rx_error_packets"] = PortStats.RxErrorPackets
 		PMData["tx_bytes"] = PortStats.TxBytes
 		PMData["tx_packets"] = PortStats.TxPackets
 		PMData["tx_ucast_packets"] = PortStats.TxUcastPackets
 		PMData["tx_mcast_packets"] = PortStats.TxMcastPackets
 		PMData["tx_bcast_packets"] = PortStats.TxBcastPackets
 		PMData["tx_error_packets"] = PortStats.TxErrorPackets
 		PMData["rx_crc_errors"] = PortStats.RxCrcErrors
 		PMData["bip_errors"] = PortStats.BipErrors

 		PMData["intf_id"] = uint64(PortStats.IntfId)

 		/*
 		   Based upon the intf_id map to an nni port or a pon port
 		   the intf_id is the key to the north or south bound collections

 		   Based upon the intf_id the port object (nni_port or pon_port) will
 		   have its data attr. updated by the current dataset collected.

 		   For prefixing the rule is currently to use the port number and not the intf_id
 		*/
 		//FIXME : Just use first NNI for now
 		/* TODO should the data be marshalled before sending it ?
 		   if IntfID == IntfIdToPortNo(0, voltha.Port_ETHERNET_NNI) {
 		       //NNI port (just the first one)
 		       err = UpdatePortObjectKpiData(StatMgr.NorthBoundPorts[PortStats.IntfID], PMData)
 		   } else {
 		       //PON ports
 		       err = UpdatePortObjectKpiData(SouthboundPorts[PortStats.IntfID], PMData)
 		   }
 		   if (err != nil) {
 		       log.Error("Error publishing statistics data")
 		   }
 		*/
 	}
 }
	/*
	* Copyright 2019-present Open Networking Foundation

	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at

	* http://www.apache.org/licenses/LICENSE-2.0

	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*/
	package adaptercore

	import (
	"errors"
	"fmt"

	"github.com/opencord/voltha-go/common/log"
	openolt "github.com/opencord/voltha-protos/go/openolt"
	"github.com/opencord/voltha-protos/go/voltha"
	)

	type PonPort struct {
	/*
	This is a highly reduced version taken from the adtran pon_port.
	TODO: Extend for use in the openolt adapter set.
	*/
	/* MAX_ONUS_SUPPORTED = 256
	DEFAULT_ENABLED = False
	MAX_DEPLOYMENT_RANGE = 25000 # Meters (OLT-PB maximum)

	_MCAST_ONU_ID = 253
	_MCAST_ALLOC_BASE = 0x500

	_SUPPORTED_ACTIVATION_METHODS = ['autodiscovery'] # , 'autoactivate']
	_SUPPORTED_AUTHENTICATION_METHODS = ['serial-number']
	*/
	PONID uint32
	DeviceID string
	IntfID uint32
	PortNum uint32
	PortID uint32
	Label string
	ONUs map[uint32]interface{}
	ONUsByID map[uint32]interface{}

	RxBytes uint64
	RxPackets uint64
	RxMcastPackets uint64
	RxBcastPackets uint64
	RxErrorPackets uint64
	TxBytes uint64
	TxPackets uint64
	TxUcastPackets uint64
	TxMcastPackets uint64
	TxBcastPackets uint64
	TxErrorPackets uint64
	}

	func NewPONPort(PONID uint32, DeviceID string, IntfID uint32, PortNum uint32) *PonPort {

	var PON PonPort

	PON.PONID = PONID
	PON.DeviceID = DeviceID
	PON.IntfID = IntfID
	PON.PortNum = PortNum
	PON.PortID = 0
	PON.Label = fmt.Sprintf("%s,%d", "pon-", PONID)

	PON.ONUs = make(map[uint32]interface{})
	PON.ONUsByID = make(map[uint32]interface{})

	/*
	Statistics taken from nni_port
	self.intf_id = 0 #handled by getter
	self.port_no = 0 #handled by getter
	self.port_id = 0 #handled by getter

	Note: In the current implementation of the kpis coming from the BAL the stats are the
	samne model for NNI and PON.

	TODO: Integrate additional kpis for the PON and other southbound port objecgts.

	*/

	PON.RxBytes = 0
	PON.RxPackets = 0
	PON.RxMcastPackets = 0
	PON.RxBcastPackets = 0
	PON.RxErrorPackets = 0
	PON.TxBytes = 0
	PON.TxPackets = 0
	PON.TxUcastPackets = 0
	PON.TxMcastPackets = 0
	PON.TxBcastPackets = 0
	PON.TxErrorPackets = 0

	/* def __str__(self):
	return "PonPort-{}: Admin: {}, Oper: {}, OLT: {}".format(self._label,
	self._admin_state,
	self._oper_status,
	self.olt)
	*/
	return &PON
	}

	type NniPort struct {
	/*
	Northbound network port, often Ethernet-based

	This is a highly reduced version taken from the adtran nni_port code set
	TODO: add functions to allow for port specific values and operations
	*/
	PortNum uint32
	Name string
	LogicalPort uint32
	IntfID uint32

	RxBytes uint64
	RxPackets uint64
	RxMcastPackets uint64
	RxBcastPackets uint64
	RxErrorPackets uint64
	TxBytes uint64
	TxPackets uint64
	TxUcastPackets uint64
	TxMcastPackets uint64
	TxBcastPackets uint64
	TxErrorPackets uint64
	}

	func NewNniPort(PortNum uint32, IntfID uint32) *NniPort {

	var NNI NniPort

	NNI.PortNum = PortNum
	NNI.Name = fmt.Sprintf("%s,%d", "nni-", PortNum)
	NNI.IntfID = IntfID

	NNI.RxBytes = 0
	NNI.RxPackets = 0
	NNI.RxMcastPackets = 0
	NNI.RxBcastPackets = 0
	NNI.RxErrorPackets = 0
	NNI.TxBytes = 0
	NNI.TxPackets = 0
	NNI.TxUcastPackets = 0
	NNI.TxMcastPackets = 0
	NNI.TxBcastPackets = 0
	NNI.TxErrorPackets = 0

	return &NNI
	}

	type OpenOltStatisticsMgr struct {
	Device *DeviceHandler
	NorthBoundPort map[uint32]NniPort
	SouthBoundPort map[uint32]PonPort
	// TODO PMMetrics Metrics
	}

	func NewOpenOltStatsMgr(Dev DeviceHandler) OpenOltStatisticsMgr {

	var StatMgr OpenOltStatisticsMgr

	StatMgr.Device = Dev
	// TODO call metric PMMetric =
	// Northbound and Southbound ports
	// added to initialize the pm_metrics
	var Ports interface{}
	Ports, _ = InitPorts("nni", Dev.deviceId)
	StatMgr.NorthBoundPort, _ = Ports.(map[uint32]NniPort)
	Ports, _ = InitPorts("pon", Dev.deviceId)
	StatMgr.SouthBoundPort, _ = Ports.(map[uint32]PonPort)

	return &StatMgr
	}

	func InitPorts(Intftype string, DeviceID string) (interface{}, error) {
	/*
	This method collects the port objects: nni and pon that are updated with the
	current data from the OLT

	Both the northbound (nni) and southbound ports are indexed by the interface id (intf_id)
	and NOT the port number. When the port object is instantiated it will contain the intf_id and
	port_no values

	:param type:
	:return:
	*/
	var i uint32
	if Intftype == "nni" {
	NniPorts := make(map[uint32]NniPort)
	for i = 0; i <= 1; i++ {
	Port := BuildPortObject(i, "nni", DeviceID).(NniPort)
	NniPorts[Port.IntfID] = Port
	}
	return NniPorts, nil
	} else if Intftype == "pon" {
	PONPorts := make(map[uint32]PonPort)
	for i = 0; i <= 16; i++ {
	PONPort := BuildPortObject(i, "pon", DeviceID).(PonPort)
	PONPorts[PONPort.IntfID] = PONPort
	}
	return PONPorts, nil
	} else {
	log.Errorf("Invalid type of interface %s", Intftype)
	return nil, errors.New("Invalid type of interface ")
	}
	}

	func BuildPortObject(PortNum uint32, IntfType string, DeviceID string) interface{} {
	/*
	Seperate method to allow for updating north and southbound ports
	newly discovered ports and devices

	:param port_num:
	:param type:
	:return:
	*/

	//This builds a port object which is added to the
	//appropriate northbound or southbound values
	if IntfType == "nni" {
	IntfID := IntfIdToPortNo(PortNum, voltha.Port_ETHERNET_UNI)
	return NewNniPort(PortNum, IntfID)
	} else if IntfType == "pon" {
	// PON ports require a different configuration
	// intf_id and pon_id are currently equal.
	IntfID := IntfIdToPortNo(PortNum, voltha.Port_ETHERNET_NNI)
	PONID := IntfID
	return NewPONPort(PONID, DeviceID, IntfID, PortNum)
	} else {
	log.Errorf("Invalid type of interface %s", IntfType)
	return nil
	}
	}

	func (StatMgr OpenOltStatisticsMgr) PortStatisticsIndication(PortStats openolt.PortStatistics) {
	log.Debugf("port-stats-collected %v", PortStats)
	StatMgr.PortsStatisticsKpis(PortStats)
	// TODO send stats to core topic to the voltha kafka or a different kafka ?
	}

	func FlowStatisticsIndication(self, FlowStats *openolt.FlowStatistics) {
	log.Debugf("flow-stats-collected %v", FlowStats)
	//TODO send to kafka ?
	}

	func (StatMgr OpenOltStatisticsMgr) PortsStatisticsKpis(PortStats openolt.PortStatistics) {

	/*map the port stats values into a dictionary
	Create a kpoEvent and publish to Kafka

	:param port_stats:
	:return:
	*/
	//var err error
	IntfID := PortStats.IntfId

	if (IntfIdToPortNo(0, voltha.Port_ETHERNET_NNI) < IntfID) &&
	(IntfID < IntfIdToPortNo(4, voltha.Port_ETHERNET_NNI)) {
	/*
	for this release we are only interested in the first NNI for
	Northbound.
	we are not using the other 3
	*/
	return
	} else {

	PMData := make(map[string]uint64)
	PMData["rx_bytes"] = PortStats.RxBytes
	PMData["rx_packets"] = PortStats.RxPackets
	PMData["rx_ucast_packets"] = PortStats.RxUcastPackets
	PMData["rx_mcast_packets"] = PortStats.RxMcastPackets
	PMData["rx_bcast_packets"] = PortStats.RxBcastPackets
	PMData["rx_error_packets"] = PortStats.RxErrorPackets
	PMData["tx_bytes"] = PortStats.TxBytes
	PMData["tx_packets"] = PortStats.TxPackets
	PMData["tx_ucast_packets"] = PortStats.TxUcastPackets
	PMData["tx_mcast_packets"] = PortStats.TxMcastPackets
	PMData["tx_bcast_packets"] = PortStats.TxBcastPackets
	PMData["tx_error_packets"] = PortStats.TxErrorPackets
	PMData["rx_crc_errors"] = PortStats.RxCrcErrors
	PMData["bip_errors"] = PortStats.BipErrors

	PMData["intf_id"] = uint64(PortStats.IntfId)

	/*
	Based upon the intf_id map to an nni port or a pon port
	the intf_id is the key to the north or south bound collections

	Based upon the intf_id the port object (nni_port or pon_port) will
	have its data attr. updated by the current dataset collected.

	For prefixing the rule is currently to use the port number and not the intf_id
	*/
	//FIXME : Just use first NNI for now
	/* TODO should the data be marshalled before sending it ?
	if IntfID == IntfIdToPortNo(0, voltha.Port_ETHERNET_NNI) {
	//NNI port (just the first one)
	err = UpdatePortObjectKpiData(StatMgr.NorthBoundPorts[PortStats.IntfID], PMData)
	} else {
	//PON ports
	err = UpdatePortObjectKpiData(SouthboundPorts[PortStats.IntfID], PMData)
	}
	if (err != nil) {
	log.Error("Error publishing statistics data")
	}
	*/
	}
	}