[VOL-4442] grpc streaming connection monitoring
Change-Id: I435a03fdc0ac2b549dc4512220148cb19c16db19
diff --git a/vendor/github.com/jhump/protoreflect/internal/codec/buffer.go b/vendor/github.com/jhump/protoreflect/internal/codec/buffer.go
new file mode 100644
index 0000000..09f8849
--- /dev/null
+++ b/vendor/github.com/jhump/protoreflect/internal/codec/buffer.go
@@ -0,0 +1,118 @@
+package codec
+
+import (
+ "fmt"
+ "io"
+)
+
+// Buffer is a reader and a writer that wraps a slice of bytes and also
+// provides API for decoding and encoding the protobuf binary format.
+//
+// Its operation is similar to that of a bytes.Buffer: writing pushes
+// data to the end of the buffer while reading pops data from the head
+// of the buffer. So the same buffer can be used to both read and write.
+type Buffer struct {
+ buf []byte
+ index int
+
+ // tmp is used when another byte slice is needed, such as when
+ // serializing messages, since we need to know the length before
+ // we can write the length prefix; by caching this, including
+ // after it is grown by serialization operations, we reduce the
+ // number of allocations needed
+ tmp []byte
+
+ deterministic bool
+}
+
+// NewBuffer creates a new buffer with the given slice of bytes as the
+// buffer's initial contents.
+func NewBuffer(buf []byte) *Buffer {
+ return &Buffer{buf: buf}
+}
+
+// SetDeterministic sets this buffer to encode messages deterministically. This
+// is useful for tests. But the overhead is non-zero, so it should not likely be
+// used outside of tests. When true, map fields in a message must have their
+// keys sorted before serialization to ensure deterministic output. Otherwise,
+// values in a map field will be serialized in map iteration order.
+func (cb *Buffer) SetDeterministic(deterministic bool) {
+ cb.deterministic = deterministic
+}
+
+// IsDeterministic returns whether or not this buffer is configured to encode
+// messages deterministically.
+func (cb *Buffer) IsDeterministic() bool {
+ return cb.deterministic
+}
+
+// Reset resets this buffer back to empty. Any subsequent writes/encodes
+// to the buffer will allocate a new backing slice of bytes.
+func (cb *Buffer) Reset() {
+ cb.buf = []byte(nil)
+ cb.index = 0
+}
+
+// Bytes returns the slice of bytes remaining in the buffer. Note that
+// this does not perform a copy: if the contents of the returned slice
+// are modified, the modifications will be visible to subsequent reads
+// via the buffer.
+func (cb *Buffer) Bytes() []byte {
+ return cb.buf[cb.index:]
+}
+
+// String returns the remaining bytes in the buffer as a string.
+func (cb *Buffer) String() string {
+ return string(cb.Bytes())
+}
+
+// EOF returns true if there are no more bytes remaining to read.
+func (cb *Buffer) EOF() bool {
+ return cb.index >= len(cb.buf)
+}
+
+// Skip attempts to skip the given number of bytes in the input. If
+// the input has fewer bytes than the given count, io.ErrUnexpectedEOF
+// is returned and the buffer is unchanged. Otherwise, the given number
+// of bytes are skipped and nil is returned.
+func (cb *Buffer) Skip(count int) error {
+ if count < 0 {
+ return fmt.Errorf("proto: bad byte length %d", count)
+ }
+ newIndex := cb.index + count
+ if newIndex < cb.index || newIndex > len(cb.buf) {
+ return io.ErrUnexpectedEOF
+ }
+ cb.index = newIndex
+ return nil
+}
+
+// Len returns the remaining number of bytes in the buffer.
+func (cb *Buffer) Len() int {
+ return len(cb.buf) - cb.index
+}
+
+// Read implements the io.Reader interface. If there are no bytes
+// remaining in the buffer, it will return 0, io.EOF. Otherwise,
+// it reads max(len(dest), cb.Len()) bytes from input and copies
+// them into dest. It returns the number of bytes copied and a nil
+// error in this case.
+func (cb *Buffer) Read(dest []byte) (int, error) {
+ if cb.index == len(cb.buf) {
+ return 0, io.EOF
+ }
+ copied := copy(dest, cb.buf[cb.index:])
+ cb.index += copied
+ return copied, nil
+}
+
+var _ io.Reader = (*Buffer)(nil)
+
+// Write implements the io.Writer interface. It always returns
+// len(data), nil.
+func (cb *Buffer) Write(data []byte) (int, error) {
+ cb.buf = append(cb.buf, data...)
+ return len(data), nil
+}
+
+var _ io.Writer = (*Buffer)(nil)
diff --git a/vendor/github.com/jhump/protoreflect/internal/codec/decode.go b/vendor/github.com/jhump/protoreflect/internal/codec/decode.go
new file mode 100644
index 0000000..a25f680
--- /dev/null
+++ b/vendor/github.com/jhump/protoreflect/internal/codec/decode.go
@@ -0,0 +1,346 @@
+package codec
+
+import (
+ "errors"
+ "fmt"
+ "io"
+ "math"
+
+ "github.com/golang/protobuf/proto"
+)
+
+// ErrOverflow is returned when an integer is too large to be represented.
+var ErrOverflow = errors.New("proto: integer overflow")
+
+// ErrBadWireType is returned when decoding a wire-type from a buffer that
+// is not valid.
+var ErrBadWireType = errors.New("proto: bad wiretype")
+
+func (cb *Buffer) decodeVarintSlow() (x uint64, err error) {
+ i := cb.index
+ l := len(cb.buf)
+
+ for shift := uint(0); shift < 64; shift += 7 {
+ if i >= l {
+ err = io.ErrUnexpectedEOF
+ return
+ }
+ b := cb.buf[i]
+ i++
+ x |= (uint64(b) & 0x7F) << shift
+ if b < 0x80 {
+ cb.index = i
+ return
+ }
+ }
+
+ // The number is too large to represent in a 64-bit value.
+ err = ErrOverflow
+ return
+}
+
+// DecodeVarint reads a varint-encoded integer from the Buffer.
+// This is the format for the
+// int32, int64, uint32, uint64, bool, and enum
+// protocol buffer types.
+func (cb *Buffer) DecodeVarint() (uint64, error) {
+ i := cb.index
+ buf := cb.buf
+
+ if i >= len(buf) {
+ return 0, io.ErrUnexpectedEOF
+ } else if buf[i] < 0x80 {
+ cb.index++
+ return uint64(buf[i]), nil
+ } else if len(buf)-i < 10 {
+ return cb.decodeVarintSlow()
+ }
+
+ var b uint64
+ // we already checked the first byte
+ x := uint64(buf[i]) - 0x80
+ i++
+
+ b = uint64(buf[i])
+ i++
+ x += b << 7
+ if b&0x80 == 0 {
+ goto done
+ }
+ x -= 0x80 << 7
+
+ b = uint64(buf[i])
+ i++
+ x += b << 14
+ if b&0x80 == 0 {
+ goto done
+ }
+ x -= 0x80 << 14
+
+ b = uint64(buf[i])
+ i++
+ x += b << 21
+ if b&0x80 == 0 {
+ goto done
+ }
+ x -= 0x80 << 21
+
+ b = uint64(buf[i])
+ i++
+ x += b << 28
+ if b&0x80 == 0 {
+ goto done
+ }
+ x -= 0x80 << 28
+
+ b = uint64(buf[i])
+ i++
+ x += b << 35
+ if b&0x80 == 0 {
+ goto done
+ }
+ x -= 0x80 << 35
+
+ b = uint64(buf[i])
+ i++
+ x += b << 42
+ if b&0x80 == 0 {
+ goto done
+ }
+ x -= 0x80 << 42
+
+ b = uint64(buf[i])
+ i++
+ x += b << 49
+ if b&0x80 == 0 {
+ goto done
+ }
+ x -= 0x80 << 49
+
+ b = uint64(buf[i])
+ i++
+ x += b << 56
+ if b&0x80 == 0 {
+ goto done
+ }
+ x -= 0x80 << 56
+
+ b = uint64(buf[i])
+ i++
+ x += b << 63
+ if b&0x80 == 0 {
+ goto done
+ }
+ // x -= 0x80 << 63 // Always zero.
+
+ return 0, ErrOverflow
+
+done:
+ cb.index = i
+ return x, nil
+}
+
+// DecodeTagAndWireType decodes a field tag and wire type from input.
+// This reads a varint and then extracts the two fields from the varint
+// value read.
+func (cb *Buffer) DecodeTagAndWireType() (tag int32, wireType int8, err error) {
+ var v uint64
+ v, err = cb.DecodeVarint()
+ if err != nil {
+ return
+ }
+ // low 7 bits is wire type
+ wireType = int8(v & 7)
+ // rest is int32 tag number
+ v = v >> 3
+ if v > math.MaxInt32 {
+ err = fmt.Errorf("tag number out of range: %d", v)
+ return
+ }
+ tag = int32(v)
+ return
+}
+
+// DecodeFixed64 reads a 64-bit integer from the Buffer.
+// This is the format for the
+// fixed64, sfixed64, and double protocol buffer types.
+func (cb *Buffer) DecodeFixed64() (x uint64, err error) {
+ // x, err already 0
+ i := cb.index + 8
+ if i < 0 || i > len(cb.buf) {
+ err = io.ErrUnexpectedEOF
+ return
+ }
+ cb.index = i
+
+ x = uint64(cb.buf[i-8])
+ x |= uint64(cb.buf[i-7]) << 8
+ x |= uint64(cb.buf[i-6]) << 16
+ x |= uint64(cb.buf[i-5]) << 24
+ x |= uint64(cb.buf[i-4]) << 32
+ x |= uint64(cb.buf[i-3]) << 40
+ x |= uint64(cb.buf[i-2]) << 48
+ x |= uint64(cb.buf[i-1]) << 56
+ return
+}
+
+// DecodeFixed32 reads a 32-bit integer from the Buffer.
+// This is the format for the
+// fixed32, sfixed32, and float protocol buffer types.
+func (cb *Buffer) DecodeFixed32() (x uint64, err error) {
+ // x, err already 0
+ i := cb.index + 4
+ if i < 0 || i > len(cb.buf) {
+ err = io.ErrUnexpectedEOF
+ return
+ }
+ cb.index = i
+
+ x = uint64(cb.buf[i-4])
+ x |= uint64(cb.buf[i-3]) << 8
+ x |= uint64(cb.buf[i-2]) << 16
+ x |= uint64(cb.buf[i-1]) << 24
+ return
+}
+
+// DecodeRawBytes reads a count-delimited byte buffer from the Buffer.
+// This is the format used for the bytes protocol buffer
+// type and for embedded messages.
+func (cb *Buffer) DecodeRawBytes(alloc bool) (buf []byte, err error) {
+ n, err := cb.DecodeVarint()
+ if err != nil {
+ return nil, err
+ }
+
+ nb := int(n)
+ if nb < 0 {
+ return nil, fmt.Errorf("proto: bad byte length %d", nb)
+ }
+ end := cb.index + nb
+ if end < cb.index || end > len(cb.buf) {
+ return nil, io.ErrUnexpectedEOF
+ }
+
+ if !alloc {
+ buf = cb.buf[cb.index:end]
+ cb.index = end
+ return
+ }
+
+ buf = make([]byte, nb)
+ copy(buf, cb.buf[cb.index:])
+ cb.index = end
+ return
+}
+
+// ReadGroup reads the input until a "group end" tag is found
+// and returns the data up to that point. Subsequent reads from
+// the buffer will read data after the group end tag. If alloc
+// is true, the data is copied to a new slice before being returned.
+// Otherwise, the returned slice is a view into the buffer's
+// underlying byte slice.
+//
+// This function correctly handles nested groups: if a "group start"
+// tag is found, then that group's end tag will be included in the
+// returned data.
+func (cb *Buffer) ReadGroup(alloc bool) ([]byte, error) {
+ var groupEnd, dataEnd int
+ groupEnd, dataEnd, err := cb.findGroupEnd()
+ if err != nil {
+ return nil, err
+ }
+ var results []byte
+ if !alloc {
+ results = cb.buf[cb.index:dataEnd]
+ } else {
+ results = make([]byte, dataEnd-cb.index)
+ copy(results, cb.buf[cb.index:])
+ }
+ cb.index = groupEnd
+ return results, nil
+}
+
+// SkipGroup is like ReadGroup, except that it discards the
+// data and just advances the buffer to point to the input
+// right *after* the "group end" tag.
+func (cb *Buffer) SkipGroup() error {
+ groupEnd, _, err := cb.findGroupEnd()
+ if err != nil {
+ return err
+ }
+ cb.index = groupEnd
+ return nil
+}
+
+// SkipField attempts to skip the value of a field with the given wire
+// type. When consuming a protobuf-encoded stream, it can be called immediately
+// after DecodeTagAndWireType to discard the subsequent data for the field.
+func (cb *Buffer) SkipField(wireType int8) error {
+ switch wireType {
+ case proto.WireFixed32:
+ if err := cb.Skip(4); err != nil {
+ return err
+ }
+ case proto.WireFixed64:
+ if err := cb.Skip(8); err != nil {
+ return err
+ }
+ case proto.WireVarint:
+ // skip varint by finding last byte (has high bit unset)
+ i := cb.index
+ limit := i + 10 // varint cannot be >10 bytes
+ for {
+ if i >= limit {
+ return ErrOverflow
+ }
+ if i >= len(cb.buf) {
+ return io.ErrUnexpectedEOF
+ }
+ if cb.buf[i]&0x80 == 0 {
+ break
+ }
+ i++
+ }
+ // TODO: This would only overflow if buffer length was MaxInt and we
+ // read the last byte. This is not a real/feasible concern on 64-bit
+ // systems. Something to worry about for 32-bit systems? Do we care?
+ cb.index = i + 1
+ case proto.WireBytes:
+ l, err := cb.DecodeVarint()
+ if err != nil {
+ return err
+ }
+ if err := cb.Skip(int(l)); err != nil {
+ return err
+ }
+ case proto.WireStartGroup:
+ if err := cb.SkipGroup(); err != nil {
+ return err
+ }
+ default:
+ return ErrBadWireType
+ }
+ return nil
+}
+
+func (cb *Buffer) findGroupEnd() (groupEnd int, dataEnd int, err error) {
+ start := cb.index
+ defer func() {
+ cb.index = start
+ }()
+ for {
+ fieldStart := cb.index
+ // read a field tag
+ _, wireType, err := cb.DecodeTagAndWireType()
+ if err != nil {
+ return 0, 0, err
+ }
+ if wireType == proto.WireEndGroup {
+ return cb.index, fieldStart, nil
+ }
+ // skip past the field's data
+ if err := cb.SkipField(wireType); err != nil {
+ return 0, 0, err
+ }
+ }
+}
diff --git a/vendor/github.com/jhump/protoreflect/internal/codec/encode.go b/vendor/github.com/jhump/protoreflect/internal/codec/encode.go
new file mode 100644
index 0000000..524f1bc
--- /dev/null
+++ b/vendor/github.com/jhump/protoreflect/internal/codec/encode.go
@@ -0,0 +1,147 @@
+package codec
+
+import (
+ "github.com/golang/protobuf/proto"
+)
+
+// EncodeVarint writes a varint-encoded integer to the Buffer.
+// This is the format for the
+// int32, int64, uint32, uint64, bool, and enum
+// protocol buffer types.
+func (cb *Buffer) EncodeVarint(x uint64) error {
+ for x >= 1<<7 {
+ cb.buf = append(cb.buf, uint8(x&0x7f|0x80))
+ x >>= 7
+ }
+ cb.buf = append(cb.buf, uint8(x))
+ return nil
+}
+
+// EncodeTagAndWireType encodes the given field tag and wire type to the
+// buffer. This combines the two values and then writes them as a varint.
+func (cb *Buffer) EncodeTagAndWireType(tag int32, wireType int8) error {
+ v := uint64((int64(tag) << 3) | int64(wireType))
+ return cb.EncodeVarint(v)
+}
+
+// EncodeFixed64 writes a 64-bit integer to the Buffer.
+// This is the format for the
+// fixed64, sfixed64, and double protocol buffer types.
+func (cb *Buffer) EncodeFixed64(x uint64) error {
+ cb.buf = append(cb.buf,
+ uint8(x),
+ uint8(x>>8),
+ uint8(x>>16),
+ uint8(x>>24),
+ uint8(x>>32),
+ uint8(x>>40),
+ uint8(x>>48),
+ uint8(x>>56))
+ return nil
+}
+
+// EncodeFixed32 writes a 32-bit integer to the Buffer.
+// This is the format for the
+// fixed32, sfixed32, and float protocol buffer types.
+func (cb *Buffer) EncodeFixed32(x uint64) error {
+ cb.buf = append(cb.buf,
+ uint8(x),
+ uint8(x>>8),
+ uint8(x>>16),
+ uint8(x>>24))
+ return nil
+}
+
+// EncodeRawBytes writes a count-delimited byte buffer to the Buffer.
+// This is the format used for the bytes protocol buffer
+// type and for embedded messages.
+func (cb *Buffer) EncodeRawBytes(b []byte) error {
+ if err := cb.EncodeVarint(uint64(len(b))); err != nil {
+ return err
+ }
+ cb.buf = append(cb.buf, b...)
+ return nil
+}
+
+// EncodeMessage writes the given message to the buffer.
+func (cb *Buffer) EncodeMessage(pm proto.Message) error {
+ bytes, err := marshalMessage(cb.buf, pm, cb.deterministic)
+ if err != nil {
+ return err
+ }
+ cb.buf = bytes
+ return nil
+}
+
+// EncodeDelimitedMessage writes the given message to the buffer with a
+// varint-encoded length prefix (the delimiter).
+func (cb *Buffer) EncodeDelimitedMessage(pm proto.Message) error {
+ bytes, err := marshalMessage(cb.tmp, pm, cb.deterministic)
+ if err != nil {
+ return err
+ }
+ // save truncated buffer if it was grown (so we can re-use it and
+ // curtail future allocations)
+ if cap(bytes) > cap(cb.tmp) {
+ cb.tmp = bytes[:0]
+ }
+ return cb.EncodeRawBytes(bytes)
+}
+
+func marshalMessage(b []byte, pm proto.Message, deterministic bool) ([]byte, error) {
+ // We try to use the most efficient way to marshal to existing slice.
+
+ if deterministic {
+ // see if the message has custom deterministic methods, preferring an
+ // "append" method over one that must always re-allocate
+ madm, ok := pm.(interface {
+ MarshalAppendDeterministic(b []byte) ([]byte, error)
+ })
+ if ok {
+ return madm.MarshalAppendDeterministic(b)
+ }
+
+ mdm, ok := pm.(interface {
+ MarshalDeterministic() ([]byte, error)
+ })
+ if ok {
+ bytes, err := mdm.MarshalDeterministic()
+ if err != nil {
+ return nil, err
+ }
+ if len(b) == 0 {
+ return bytes, nil
+ }
+ return append(b, bytes...), nil
+ }
+
+ var buf proto.Buffer
+ buf.SetDeterministic(true)
+ if err := buf.Marshal(pm); err != nil {
+ return nil, err
+ }
+ bytes := buf.Bytes()
+ if len(b) == 0 {
+ return bytes, nil
+ }
+ return append(b, bytes...), nil
+ }
+
+ mam, ok := pm.(interface {
+ // see if we can append the message, vs. having to re-allocate
+ MarshalAppend(b []byte) ([]byte, error)
+ })
+ if ok {
+ return mam.MarshalAppend(b)
+ }
+
+ // lowest common denominator
+ bytes, err := proto.Marshal(pm)
+ if err != nil {
+ return nil, err
+ }
+ if len(b) == 0 {
+ return bytes, nil
+ }
+ return append(b, bytes...), nil
+}
diff --git a/vendor/github.com/jhump/protoreflect/internal/standard_files.go b/vendor/github.com/jhump/protoreflect/internal/standard_files.go
new file mode 100644
index 0000000..4a8b47a
--- /dev/null
+++ b/vendor/github.com/jhump/protoreflect/internal/standard_files.go
@@ -0,0 +1,127 @@
+// Package internal contains some code that should not be exported but needs to
+// be shared across more than one of the protoreflect sub-packages.
+package internal
+
+import (
+ "bytes"
+ "compress/gzip"
+ "fmt"
+ "io/ioutil"
+
+ "github.com/golang/protobuf/proto"
+ dpb "github.com/golang/protobuf/protoc-gen-go/descriptor"
+)
+
+// TODO: replace this alias configuration with desc.RegisterImportPath?
+
+// StdFileAliases are the standard protos included with protoc, but older versions of
+// their respective packages registered them using incorrect paths.
+var StdFileAliases = map[string]string{
+ // Files for the github.com/golang/protobuf/ptypes package at one point were
+ // registered using the path where the proto files are mirrored in GOPATH,
+ // inside the golang/protobuf repo.
+ // (Fixed as of https://github.com/golang/protobuf/pull/412)
+ "google/protobuf/any.proto": "github.com/golang/protobuf/ptypes/any/any.proto",
+ "google/protobuf/duration.proto": "github.com/golang/protobuf/ptypes/duration/duration.proto",
+ "google/protobuf/empty.proto": "github.com/golang/protobuf/ptypes/empty/empty.proto",
+ "google/protobuf/struct.proto": "github.com/golang/protobuf/ptypes/struct/struct.proto",
+ "google/protobuf/timestamp.proto": "github.com/golang/protobuf/ptypes/timestamp/timestamp.proto",
+ "google/protobuf/wrappers.proto": "github.com/golang/protobuf/ptypes/wrappers/wrappers.proto",
+ // Files for the google.golang.org/genproto/protobuf package at one point
+ // were registered with an anomalous "src/" prefix.
+ // (Fixed as of https://github.com/google/go-genproto/pull/31)
+ "google/protobuf/api.proto": "src/google/protobuf/api.proto",
+ "google/protobuf/field_mask.proto": "src/google/protobuf/field_mask.proto",
+ "google/protobuf/source_context.proto": "src/google/protobuf/source_context.proto",
+ "google/protobuf/type.proto": "src/google/protobuf/type.proto",
+
+ // Other standard files (descriptor.proto and compiler/plugin.proto) are
+ // registered correctly, so we don't need rules for them here.
+}
+
+func init() {
+ // We provide aliasing in both directions, to support files with the
+ // proper import path linked against older versions of the generated
+ // files AND files that used the aliased import path but linked against
+ // newer versions of the generated files (which register with the
+ // correct path).
+
+ // Get all files defined above
+ keys := make([]string, 0, len(StdFileAliases))
+ for k := range StdFileAliases {
+ keys = append(keys, k)
+ }
+ // And add inverse mappings
+ for _, k := range keys {
+ alias := StdFileAliases[k]
+ StdFileAliases[alias] = k
+ }
+}
+
+type ErrNoSuchFile string
+
+func (e ErrNoSuchFile) Error() string {
+ return fmt.Sprintf("no such file: %q", string(e))
+}
+
+// LoadFileDescriptor loads a registered descriptor and decodes it. If the given
+// name cannot be loaded but is a known standard name, an alias will be tried,
+// so the standard files can be loaded even if linked against older "known bad"
+// versions of packages.
+func LoadFileDescriptor(file string) (*dpb.FileDescriptorProto, error) {
+ fdb := proto.FileDescriptor(file)
+ aliased := false
+ if fdb == nil {
+ var ok bool
+ alias, ok := StdFileAliases[file]
+ if ok {
+ aliased = true
+ if fdb = proto.FileDescriptor(alias); fdb == nil {
+ return nil, ErrNoSuchFile(file)
+ }
+ } else {
+ return nil, ErrNoSuchFile(file)
+ }
+ }
+
+ fd, err := DecodeFileDescriptor(file, fdb)
+ if err != nil {
+ return nil, err
+ }
+
+ if aliased {
+ // the file descriptor will have the alias used to load it, but
+ // we need it to have the specified name in order to link it
+ fd.Name = proto.String(file)
+ }
+
+ return fd, nil
+}
+
+// DecodeFileDescriptor decodes the bytes of a registered file descriptor.
+// Registered file descriptors are first "proto encoded" (e.g. binary format
+// for the descriptor protos) and then gzipped. So this function gunzips and
+// then unmarshals into a descriptor proto.
+func DecodeFileDescriptor(element string, fdb []byte) (*dpb.FileDescriptorProto, error) {
+ raw, err := decompress(fdb)
+ if err != nil {
+ return nil, fmt.Errorf("failed to decompress %q descriptor: %v", element, err)
+ }
+ fd := dpb.FileDescriptorProto{}
+ if err := proto.Unmarshal(raw, &fd); err != nil {
+ return nil, fmt.Errorf("bad descriptor for %q: %v", element, err)
+ }
+ return &fd, nil
+}
+
+func decompress(b []byte) ([]byte, error) {
+ r, err := gzip.NewReader(bytes.NewReader(b))
+ if err != nil {
+ return nil, fmt.Errorf("bad gzipped descriptor: %v", err)
+ }
+ out, err := ioutil.ReadAll(r)
+ if err != nil {
+ return nil, fmt.Errorf("bad gzipped descriptor: %v", err)
+ }
+ return out, nil
+}
diff --git a/vendor/github.com/jhump/protoreflect/internal/unrecognized.go b/vendor/github.com/jhump/protoreflect/internal/unrecognized.go
new file mode 100644
index 0000000..c903d4b
--- /dev/null
+++ b/vendor/github.com/jhump/protoreflect/internal/unrecognized.go
@@ -0,0 +1,86 @@
+package internal
+
+import (
+ "reflect"
+
+ "github.com/golang/protobuf/proto"
+)
+
+var typeOfBytes = reflect.TypeOf([]byte(nil))
+
+// GetUnrecognized fetches the bytes of unrecognized fields for the given message.
+func GetUnrecognized(msg proto.Message) []byte {
+ val := reflect.Indirect(reflect.ValueOf(msg))
+ u := val.FieldByName("XXX_unrecognized")
+ if u.IsValid() && u.Type() == typeOfBytes {
+ return u.Interface().([]byte)
+ }
+
+ // Fallback to reflection for API v2 messages
+ get, _, _, ok := unrecognizedGetSetMethods(val)
+ if !ok {
+ return nil
+ }
+
+ return get.Call([]reflect.Value(nil))[0].Convert(typeOfBytes).Interface().([]byte)
+}
+
+// SetUnrecognized adds the given bytes to the unrecognized fields for the given message.
+func SetUnrecognized(msg proto.Message, data []byte) {
+ val := reflect.Indirect(reflect.ValueOf(msg))
+ u := val.FieldByName("XXX_unrecognized")
+ if u.IsValid() && u.Type() == typeOfBytes {
+ // Just store the bytes in the unrecognized field
+ ub := u.Interface().([]byte)
+ ub = append(ub, data...)
+ u.Set(reflect.ValueOf(ub))
+ return
+ }
+
+ // Fallback to reflection for API v2 messages
+ get, set, argType, ok := unrecognizedGetSetMethods(val)
+ if !ok {
+ return
+ }
+
+ existing := get.Call([]reflect.Value(nil))[0].Convert(typeOfBytes).Interface().([]byte)
+ if len(existing) > 0 {
+ data = append(existing, data...)
+ }
+ set.Call([]reflect.Value{reflect.ValueOf(data).Convert(argType)})
+}
+
+func unrecognizedGetSetMethods(val reflect.Value) (get reflect.Value, set reflect.Value, argType reflect.Type, ok bool) {
+ // val could be an APIv2 message. We use reflection to interact with
+ // this message so that we don't have a hard dependency on the new
+ // version of the protobuf package.
+ refMethod := val.MethodByName("ProtoReflect")
+ if !refMethod.IsValid() {
+ if val.CanAddr() {
+ refMethod = val.Addr().MethodByName("ProtoReflect")
+ }
+ if !refMethod.IsValid() {
+ return
+ }
+ }
+ refType := refMethod.Type()
+ if refType.NumIn() != 0 || refType.NumOut() != 1 {
+ return
+ }
+ ref := refMethod.Call([]reflect.Value(nil))
+ getMethod, setMethod := ref[0].MethodByName("GetUnknown"), ref[0].MethodByName("SetUnknown")
+ if !getMethod.IsValid() || !setMethod.IsValid() {
+ return
+ }
+ getType := getMethod.Type()
+ setType := setMethod.Type()
+ if getType.NumIn() != 0 || getType.NumOut() != 1 || setType.NumIn() != 1 || setType.NumOut() != 0 {
+ return
+ }
+ arg := setType.In(0)
+ if !arg.ConvertibleTo(typeOfBytes) || getType.Out(0) != arg {
+ return
+ }
+
+ return getMethod, setMethod, arg, true
+}