blob: 1a541c7973135ac2d19dcfa517abbb612f88c2c2 [file] [log] [blame]
/*
* Copyright 2020-present Open Networking Foundation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
//Package adaptercoreonu provides the utility for onu devices, flows and statistics
package adaptercoreonu
import (
"context"
"errors"
"fmt"
"strconv"
"sync"
"time"
"github.com/gogo/protobuf/proto"
"github.com/golang/protobuf/ptypes"
"github.com/looplab/fsm"
me "github.com/opencord/omci-lib-go/generated"
"github.com/opencord/voltha-lib-go/v4/pkg/adapters/adapterif"
"github.com/opencord/voltha-lib-go/v4/pkg/db"
"github.com/opencord/voltha-lib-go/v4/pkg/events/eventif"
flow "github.com/opencord/voltha-lib-go/v4/pkg/flows"
"github.com/opencord/voltha-lib-go/v4/pkg/log"
vc "github.com/opencord/voltha-protos/v4/go/common"
"github.com/opencord/voltha-protos/v4/go/extension"
ic "github.com/opencord/voltha-protos/v4/go/inter_container"
"github.com/opencord/voltha-protos/v4/go/openflow_13"
of "github.com/opencord/voltha-protos/v4/go/openflow_13"
ofp "github.com/opencord/voltha-protos/v4/go/openflow_13"
oop "github.com/opencord/voltha-protos/v4/go/openolt"
"github.com/opencord/voltha-protos/v4/go/voltha"
)
/*
// Constants for number of retries and for timeout
const (
MaxRetry = 10
MaxTimeOutInMs = 500
)
*/
const (
// events of Device FSM
devEvDeviceInit = "devEvDeviceInit"
devEvGrpcConnected = "devEvGrpcConnected"
devEvGrpcDisconnected = "devEvGrpcDisconnected"
devEvDeviceUpInd = "devEvDeviceUpInd"
devEvDeviceDownInd = "devEvDeviceDownInd"
)
const (
// states of Device FSM
devStNull = "devStNull"
devStDown = "devStDown"
devStInit = "devStInit"
devStConnected = "devStConnected"
devStUp = "devStUp"
)
//Event category and subcategory definitions - same as defiend for OLT in eventmgr.go - should be done more centrally
const (
pon = voltha.EventSubCategory_PON
//olt = voltha.EventSubCategory_OLT
//ont = voltha.EventSubCategory_ONT
//onu = voltha.EventSubCategory_ONU
//nni = voltha.EventSubCategory_NNI
//service = voltha.EventCategory_SERVICE
//security = voltha.EventCategory_SECURITY
equipment = voltha.EventCategory_EQUIPMENT
//processing = voltha.EventCategory_PROCESSING
//environment = voltha.EventCategory_ENVIRONMENT
//communication = voltha.EventCategory_COMMUNICATION
)
const (
cEventObjectType = "ONU"
)
const (
cOnuActivatedEvent = "ONU_ACTIVATED"
)
type usedOmciConfigFsms int
const (
cUploadFsm usedOmciConfigFsms = iota
cDownloadFsm
cUniLockFsm
cUniUnLockFsm
cAniConfigFsm
cUniVlanConfigFsm
cL2PmFsm
cOnuUpgradeFsm
)
type omciIdleCheckStruct struct {
omciIdleCheckFunc func(*deviceHandler, context.Context, usedOmciConfigFsms, string) bool
omciIdleState string
}
var fsmOmciIdleStateFuncMap = map[usedOmciConfigFsms]omciIdleCheckStruct{
cUploadFsm: {(*deviceHandler).isFsmInOmciIdleStateDefault, cMibUlFsmIdleState},
cDownloadFsm: {(*deviceHandler).isFsmInOmciIdleStateDefault, cMibDlFsmIdleState},
cUniLockFsm: {(*deviceHandler).isFsmInOmciIdleStateDefault, cUniFsmIdleState},
cUniUnLockFsm: {(*deviceHandler).isFsmInOmciIdleStateDefault, cUniFsmIdleState},
cAniConfigFsm: {(*deviceHandler).isAniConfigFsmInOmciIdleState, cAniFsmIdleState},
cUniVlanConfigFsm: {(*deviceHandler).isUniVlanConfigFsmInOmciIdleState, cVlanFsmIdleState},
cL2PmFsm: {(*deviceHandler).isFsmInOmciIdleStateDefault, cL2PmFsmIdleState},
cOnuUpgradeFsm: {(*deviceHandler).isFsmInOmciIdleStateDefault, cOnuUpgradeFsmIdleState},
}
const (
// device reasons
drUnset = 0
drActivatingOnu = 1
drStartingOpenomci = 2
drDiscoveryMibsyncComplete = 3
drInitialMibDownloaded = 4
drTechProfileConfigDownloadSuccess = 5
drOmciFlowsPushed = 6
drOmciAdminLock = 7
drOnuReenabled = 8
drStoppingOpenomci = 9
drRebooting = 10
drOmciFlowsDeleted = 11
drTechProfileConfigDeleteSuccess = 12
)
var deviceReasonMap = map[uint8]string{
drUnset: "unset",
drActivatingOnu: "activating-onu",
drStartingOpenomci: "starting-openomci",
drDiscoveryMibsyncComplete: "discovery-mibsync-complete",
drInitialMibDownloaded: "initial-mib-downloaded",
drTechProfileConfigDownloadSuccess: "tech-profile-config-download-success",
drOmciFlowsPushed: "omci-flows-pushed",
drOmciAdminLock: "omci-admin-lock",
drOnuReenabled: "onu-reenabled",
drStoppingOpenomci: "stopping-openomci",
drRebooting: "rebooting",
drOmciFlowsDeleted: "omci-flows-deleted",
drTechProfileConfigDeleteSuccess: "tech-profile-config-delete-success",
}
const (
cNoReconciling = iota
cOnuConfigReconciling
cSkipOnuConfigReconciling
)
//deviceHandler will interact with the ONU ? device.
type deviceHandler struct {
deviceID string
DeviceType string
adminState string
device *voltha.Device
logicalDeviceID string
ProxyAddressID string
ProxyAddressType string
parentID string
ponPortNumber uint32
coreProxy adapterif.CoreProxy
AdapterProxy adapterif.AdapterProxy
EventProxy eventif.EventProxy
pmConfigs *voltha.PmConfigs
pOpenOnuAc *OpenONUAC
pDeviceStateFsm *fsm.FSM
//pPonPort *voltha.Port
deviceEntrySet chan bool //channel for DeviceEntry set event
pOnuOmciDevice *OnuDeviceEntry
pOnuTP *onuUniTechProf
pOnuMetricsMgr *onuMetricsManager
pAlarmMgr *onuAlarmManager
pSelfTestHdlr *selfTestControlBlock
exitChannel chan int
lockDevice sync.RWMutex
pOnuIndication *oop.OnuIndication
deviceReason uint8
mutexDeviceReason sync.RWMutex
pLockStateFsm *lockStateFsm
pUnlockStateFsm *lockStateFsm
//flowMgr *OpenOltFlowMgr
//eventMgr *OpenOltEventMgr
//resourceMgr *rsrcMgr.OpenOltResourceMgr
//discOnus sync.Map
//onus sync.Map
//portStats *OpenOltStatisticsMgr
collectorIsRunning bool
mutexCollectorFlag sync.RWMutex
stopCollector chan bool
alarmManagerIsRunning bool
mutextAlarmManagerFlag sync.RWMutex
stopAlarmManager chan bool
stopHeartbeatCheck chan bool
uniEntityMap map[uint32]*onuUniPort
mutexKvStoreContext sync.Mutex
lockVlanConfig sync.RWMutex
UniVlanConfigFsmMap map[uint8]*UniVlanConfigFsm
lockUpgradeFsm sync.RWMutex
pOnuUpradeFsm *OnuUpgradeFsm
reconciling uint8
mutexReconcilingFlag sync.RWMutex
chReconcilingFinished chan bool //channel to indicate that reconciling has been finished
reconcilingFlows bool
mutexReconcilingFlowsFlag sync.RWMutex
chReconcilingFlowsFinished chan bool //channel to indicate that reconciling of flows has been finished
mutexReadyForOmciConfig sync.RWMutex
readyForOmciConfig bool
deletionInProgress bool
mutexDeletionInProgressFlag sync.RWMutex
upgradeSuccess bool
}
//newDeviceHandler creates a new device handler
func newDeviceHandler(ctx context.Context, cp adapterif.CoreProxy, ap adapterif.AdapterProxy, ep eventif.EventProxy, device *voltha.Device, adapter *OpenONUAC) *deviceHandler {
var dh deviceHandler
dh.coreProxy = cp
dh.AdapterProxy = ap
dh.EventProxy = ep
cloned := (proto.Clone(device)).(*voltha.Device)
dh.deviceID = cloned.Id
dh.DeviceType = cloned.Type
dh.adminState = "up"
dh.device = cloned
dh.pOpenOnuAc = adapter
dh.exitChannel = make(chan int, 1)
dh.lockDevice = sync.RWMutex{}
dh.deviceEntrySet = make(chan bool, 1)
dh.collectorIsRunning = false
dh.stopCollector = make(chan bool, 2)
dh.alarmManagerIsRunning = false
dh.stopAlarmManager = make(chan bool, 2)
dh.stopHeartbeatCheck = make(chan bool, 2)
//dh.metrics = pmmetrics.NewPmMetrics(cloned.Id, pmmetrics.Frequency(150), pmmetrics.FrequencyOverride(false), pmmetrics.Grouped(false), pmmetrics.Metrics(pmNames))
//TODO initialize the support classes.
dh.uniEntityMap = make(map[uint32]*onuUniPort)
dh.lockVlanConfig = sync.RWMutex{}
dh.lockUpgradeFsm = sync.RWMutex{}
dh.UniVlanConfigFsmMap = make(map[uint8]*UniVlanConfigFsm)
dh.reconciling = cNoReconciling
dh.chReconcilingFinished = make(chan bool)
dh.reconcilingFlows = false
dh.chReconcilingFlowsFinished = make(chan bool)
dh.readyForOmciConfig = false
dh.deletionInProgress = false
if dh.device.PmConfigs != nil { // can happen after onu adapter restart
dh.pmConfigs = cloned.PmConfigs
} /* else {
// will be populated when onu_metrics_mananger is initialized.
}*/
// Device related state machine
dh.pDeviceStateFsm = fsm.NewFSM(
devStNull,
fsm.Events{
{Name: devEvDeviceInit, Src: []string{devStNull, devStDown}, Dst: devStInit},
{Name: devEvGrpcConnected, Src: []string{devStInit}, Dst: devStConnected},
{Name: devEvGrpcDisconnected, Src: []string{devStConnected, devStDown}, Dst: devStInit},
{Name: devEvDeviceUpInd, Src: []string{devStConnected, devStDown}, Dst: devStUp},
{Name: devEvDeviceDownInd, Src: []string{devStUp}, Dst: devStDown},
},
fsm.Callbacks{
"before_event": func(e *fsm.Event) { dh.logStateChange(ctx, e) },
("before_" + devEvDeviceInit): func(e *fsm.Event) { dh.doStateInit(ctx, e) },
("after_" + devEvDeviceInit): func(e *fsm.Event) { dh.postInit(ctx, e) },
("before_" + devEvGrpcConnected): func(e *fsm.Event) { dh.doStateConnected(ctx, e) },
("before_" + devEvGrpcDisconnected): func(e *fsm.Event) { dh.doStateInit(ctx, e) },
("after_" + devEvGrpcDisconnected): func(e *fsm.Event) { dh.postInit(ctx, e) },
("before_" + devEvDeviceUpInd): func(e *fsm.Event) { dh.doStateUp(ctx, e) },
("before_" + devEvDeviceDownInd): func(e *fsm.Event) { dh.doStateDown(ctx, e) },
},
)
return &dh
}
// start save the device to the data model
func (dh *deviceHandler) start(ctx context.Context) {
logger.Debugw(ctx, "starting-device-handler", log.Fields{"device": dh.device, "device-id": dh.deviceID})
// Add the initial device to the local model
logger.Debug(ctx, "device-handler-started")
}
/*
// stop stops the device dh. Not much to do for now
func (dh *deviceHandler) stop(ctx context.Context) {
logger.Debug("stopping-device-handler")
dh.exitChannel <- 1
}
*/
// ##########################################################################################
// deviceHandler methods that implement the adapters interface requests ##### begin #########
//adoptOrReconcileDevice adopts the ONU device
func (dh *deviceHandler) adoptOrReconcileDevice(ctx context.Context, device *voltha.Device) {
logger.Debugw(ctx, "Adopt_or_reconcile_device", log.Fields{"device-id": device.Id, "Address": device.GetHostAndPort()})
logger.Debugw(ctx, "Device FSM: ", log.Fields{"state": string(dh.pDeviceStateFsm.Current())})
if dh.pDeviceStateFsm.Is(devStNull) {
if err := dh.pDeviceStateFsm.Event(devEvDeviceInit); err != nil {
logger.Errorw(ctx, "Device FSM: Can't go to state DeviceInit", log.Fields{"err": err})
}
logger.Debugw(ctx, "Device FSM: ", log.Fields{"state": string(dh.pDeviceStateFsm.Current())})
// device.PmConfigs is not nil in cases when adapter restarts. We should not re-set the core again.
if device.PmConfigs == nil {
// Now, set the initial PM configuration for that device
if err := dh.coreProxy.DevicePMConfigUpdate(ctx, dh.pmConfigs); err != nil {
logger.Errorw(ctx, "error updating pm config to core", log.Fields{"device-id": dh.deviceID, "err": err})
}
}
} else {
logger.Debugw(ctx, "AdoptOrReconcileDevice: Agent/device init already done", log.Fields{"device-id": device.Id})
}
}
func (dh *deviceHandler) processInterAdapterOMCIReceiveMessage(ctx context.Context, msg *ic.InterAdapterMessage) error {
msgBody := msg.GetBody()
omciMsg := &ic.InterAdapterOmciMessage{}
if err := ptypes.UnmarshalAny(msgBody, omciMsg); err != nil {
logger.Warnw(ctx, "cannot-unmarshal-omci-msg-body", log.Fields{
"device-id": dh.deviceID, "error": err})
return err
}
/* msg print moved symmetrically to omci_cc, if wanted here as additional debug, than perhaps only based on additional debug setting!
//assuming omci message content is hex coded!
// with restricted output of 16(?) bytes would be ...omciMsg.Message[:16]
logger.Debugw(ctx, "inter-adapter-recv-omci", log.Fields{
"device-id": dh.deviceID, "RxOmciMessage": hex.EncodeToString(omciMsg.Message)})
*/
pDevEntry := dh.getOnuDeviceEntry(ctx, true)
if pDevEntry != nil {
if pDevEntry.PDevOmciCC != nil {
return pDevEntry.PDevOmciCC.receiveMessage(log.WithSpanFromContext(context.TODO(), ctx), omciMsg.Message)
}
logger.Debugw(ctx, "omciCC not ready to receive omci messages - incoming omci message ignored", log.Fields{"rxMsg": omciMsg.Message})
}
logger.Errorw(ctx, "No valid OnuDevice -aborting", log.Fields{"device-id": dh.deviceID})
return fmt.Errorf("no valid OnuDevice: %s", dh.deviceID)
}
func (dh *deviceHandler) processInterAdapterTechProfileDownloadReqMessage(
ctx context.Context,
msg *ic.InterAdapterMessage) error {
logger.Infow(ctx, "tech-profile-download-request", log.Fields{"device-id": dh.deviceID})
pDevEntry := dh.getOnuDeviceEntry(ctx, true)
if pDevEntry == nil {
logger.Errorw(ctx, "No valid OnuDevice - aborting", log.Fields{"device-id": dh.deviceID})
return fmt.Errorf("no valid OnuDevice: %s", dh.deviceID)
}
if dh.pOnuTP == nil {
//should normally not happen ...
logger.Errorw(ctx, "onuTechProf instance not set up for DLMsg request - ignoring request",
log.Fields{"device-id": dh.deviceID})
return fmt.Errorf("techProfile DLMsg request while onuTechProf instance not setup: %s", dh.deviceID)
}
if !dh.isReadyForOmciConfig() {
logger.Errorw(ctx, "TechProf-set rejected: improper device state", log.Fields{"device-id": dh.deviceID,
"device-state": dh.getDeviceReasonString()})
return fmt.Errorf("improper device state %s on device %s", dh.getDeviceReasonString(), dh.deviceID)
}
//previous state test here was just this one, now extended for more states to reject the SetRequest:
// at least 'mib-downloaded' should be reached for processing of this specific ONU configuration
// if (dh.deviceReason == "stopping-openomci") || (dh.deviceReason == "omci-admin-lock")
msgBody := msg.GetBody()
techProfMsg := &ic.InterAdapterTechProfileDownloadMessage{}
if err := ptypes.UnmarshalAny(msgBody, techProfMsg); err != nil {
logger.Warnw(ctx, "cannot-unmarshal-techprof-msg-body", log.Fields{
"device-id": dh.deviceID, "error": err})
return err
}
// we have to lock access to TechProfile processing based on different messageType calls or
// even to fast subsequent calls of the same messageType as well as OnuKVStore processing due
// to possible concurrent access by flow processing
dh.pOnuTP.lockTpProcMutex()
defer dh.pOnuTP.unlockTpProcMutex()
if techProfMsg.UniId > 255 {
return fmt.Errorf(fmt.Sprintf("received UniId value exceeds range: %d, device-id: %s",
techProfMsg.UniId, dh.deviceID))
}
uniID := uint8(techProfMsg.UniId)
tpID, err := GetTpIDFromTpPath(techProfMsg.Path)
if err != nil {
logger.Errorw(ctx, "error-parsing-tpid-from-tppath", log.Fields{"err": err, "tp-path": techProfMsg.Path})
return err
}
logger.Debugw(ctx, "unmarshal-techprof-msg-body", log.Fields{"uniID": uniID, "tp-path": techProfMsg.Path, "tpID": tpID})
if bTpModify := pDevEntry.updateOnuUniTpPath(ctx, uniID, uint8(tpID), techProfMsg.Path); bTpModify {
logger.Debugw(ctx, "onu-uni-tp-path-modified", log.Fields{"uniID": uniID, "tp-path": techProfMsg.Path, "tpID": tpID})
// if there has been some change for some uni TechProfilePath
//in order to allow concurrent calls to other dh instances we do not wait for execution here
//but doing so we can not indicate problems to the caller (who does what with that then?)
//by now we just assume straightforward successful execution
//TODO!!! Generally: In this scheme it would be good to have some means to indicate
// possible problems to the caller later autonomously
// deadline context to ensure completion of background routines waited for
//20200721: 10s proved to be less in 8*8 ONU test on local vbox machine with debug, might be further adapted
deadline := time.Now().Add(dh.pOpenOnuAc.maxTimeoutInterAdapterComm) //allowed run time to finish before execution
dctx, cancel := context.WithDeadline(context.Background(), deadline)
dh.pOnuTP.resetTpProcessingErrorIndication(uniID, tpID)
var wg sync.WaitGroup
wg.Add(1) // for the 1 go routine to finish
// attention: deadline completion check and wg.Done is to be done in both routines
go dh.pOnuTP.configureUniTp(log.WithSpanFromContext(dctx, ctx), uniID, techProfMsg.Path, &wg)
dh.waitForCompletion(ctx, cancel, &wg, "TechProfDwld") //wait for background process to finish
if tpErr := dh.pOnuTP.getTpProcessingErrorIndication(uniID, tpID); tpErr != nil {
logger.Errorw(ctx, "error-processing-tp", log.Fields{"device-id": dh.deviceID, "err": tpErr, "tp-path": techProfMsg.Path})
return tpErr
}
deadline = time.Now().Add(dh.pOpenOnuAc.maxTimeoutInterAdapterComm) //allowed run time to finish before execution
dctx2, cancel2 := context.WithDeadline(context.Background(), deadline)
pDevEntry.resetKvProcessingErrorIndication()
wg.Add(1) // for the 1 go routine to finish
go pDevEntry.updateOnuKvStore(log.WithSpanFromContext(dctx2, ctx), &wg)
dh.waitForCompletion(ctx, cancel2, &wg, "TechProfDwld") //wait for background process to finish
if kvErr := pDevEntry.getKvProcessingErrorIndication(); kvErr != nil {
logger.Errorw(ctx, "error-updating-KV", log.Fields{"device-id": dh.deviceID, "err": kvErr, "tp-path": techProfMsg.Path})
return kvErr
}
return nil
}
// no change, nothing really to do - return success
logger.Debugw(ctx, "onu-uni-tp-path-not-modified", log.Fields{"uniID": uniID, "tp-path": techProfMsg.Path, "tpID": tpID})
return nil
}
func (dh *deviceHandler) processInterAdapterDeleteGemPortReqMessage(
ctx context.Context,
msg *ic.InterAdapterMessage) error {
logger.Infow(ctx, "delete-gem-port-request", log.Fields{"device-id": dh.deviceID})
pDevEntry := dh.getOnuDeviceEntry(ctx, true)
if pDevEntry == nil {
logger.Errorw(ctx, "No valid OnuDevice - aborting", log.Fields{"device-id": dh.deviceID})
return fmt.Errorf("no valid OnuDevice: %s", dh.deviceID)
}
if dh.pOnuTP == nil {
//should normally not happen ...
logger.Warnw(ctx, "onuTechProf instance not set up for DelGem request - ignoring request",
log.Fields{"device-id": dh.deviceID})
return fmt.Errorf("techProfile DelGem request while onuTechProf instance not setup: %s", dh.deviceID)
}
msgBody := msg.GetBody()
delGemPortMsg := &ic.InterAdapterDeleteGemPortMessage{}
if err := ptypes.UnmarshalAny(msgBody, delGemPortMsg); err != nil {
logger.Warnw(ctx, "cannot-unmarshal-delete-gem-msg-body", log.Fields{
"device-id": dh.deviceID, "error": err})
return err
}
//compare TECH_PROFILE_DOWNLOAD_REQUEST
dh.pOnuTP.lockTpProcMutex()
defer dh.pOnuTP.unlockTpProcMutex()
if delGemPortMsg.UniId > 255 {
return fmt.Errorf(fmt.Sprintf("received UniId value exceeds range: %d, device-id: %s",
delGemPortMsg.UniId, dh.deviceID))
}
uniID := uint8(delGemPortMsg.UniId)
tpID, err := GetTpIDFromTpPath(delGemPortMsg.TpPath)
if err != nil {
logger.Errorw(ctx, "error-extracting-tp-id-from-tp-path", log.Fields{"err": err, "tp-path": delGemPortMsg.TpPath})
return err
}
//a removal of some GemPort would never remove the complete TechProfile entry (done on T-Cont)
// deadline context to ensure completion of background routines waited for
deadline := time.Now().Add(dh.pOpenOnuAc.maxTimeoutInterAdapterComm) //allowed run time to finish before execution
dctx, cancel := context.WithDeadline(context.Background(), deadline)
dh.pOnuTP.resetTpProcessingErrorIndication(uniID, tpID)
var wg sync.WaitGroup
wg.Add(1) // for the 1 go routine to finish
go dh.pOnuTP.deleteTpResource(log.WithSpanFromContext(dctx, ctx), uniID, tpID, delGemPortMsg.TpPath,
cResourceGemPort, delGemPortMsg.GemPortId, &wg)
dh.waitForCompletion(ctx, cancel, &wg, "GemDelete") //wait for background process to finish
return dh.pOnuTP.getTpProcessingErrorIndication(uniID, tpID)
}
func (dh *deviceHandler) processInterAdapterDeleteTcontReqMessage(
ctx context.Context,
msg *ic.InterAdapterMessage) error {
logger.Infow(ctx, "delete-tcont-request", log.Fields{"device-id": dh.deviceID})
pDevEntry := dh.getOnuDeviceEntry(ctx, true)
if pDevEntry == nil {
logger.Errorw(ctx, "No valid OnuDevice - aborting", log.Fields{"device-id": dh.deviceID})
return fmt.Errorf("no valid OnuDevice: %s", dh.deviceID)
}
if dh.pOnuTP == nil {
//should normally not happen ...
logger.Warnw(ctx, "onuTechProf instance not set up for DelTcont request - ignoring request",
log.Fields{"device-id": dh.deviceID})
return fmt.Errorf("techProfile DelTcont request while onuTechProf instance not setup: %s", dh.deviceID)
}
msgBody := msg.GetBody()
delTcontMsg := &ic.InterAdapterDeleteTcontMessage{}
if err := ptypes.UnmarshalAny(msgBody, delTcontMsg); err != nil {
logger.Warnw(ctx, "cannot-unmarshal-delete-tcont-msg-body", log.Fields{
"device-id": dh.deviceID, "error": err})
return err
}
//compare TECH_PROFILE_DOWNLOAD_REQUEST
dh.pOnuTP.lockTpProcMutex()
defer dh.pOnuTP.unlockTpProcMutex()
if delTcontMsg.UniId > 255 {
return fmt.Errorf(fmt.Sprintf("received UniId value exceeds range: %d, device-id: %s",
delTcontMsg.UniId, dh.deviceID))
}
uniID := uint8(delTcontMsg.UniId)
tpPath := delTcontMsg.TpPath
tpID, err := GetTpIDFromTpPath(tpPath)
if err != nil {
logger.Errorw(ctx, "error-extracting-tp-id-from-tp-path", log.Fields{"err": err, "tp-path": tpPath})
return err
}
if bTpModify := pDevEntry.updateOnuUniTpPath(ctx, uniID, tpID, ""); bTpModify {
pDevEntry.freeTcont(ctx, uint16(delTcontMsg.AllocId))
// deadline context to ensure completion of background routines waited for
deadline := time.Now().Add(dh.pOpenOnuAc.maxTimeoutInterAdapterComm) //allowed run time to finish before execution
dctx, cancel := context.WithDeadline(context.Background(), deadline)
dh.pOnuTP.resetTpProcessingErrorIndication(uniID, tpID)
pDevEntry.resetKvProcessingErrorIndication()
var wg sync.WaitGroup
wg.Add(2) // for the 2 go routines to finish
go dh.pOnuTP.deleteTpResource(log.WithSpanFromContext(dctx, ctx), uniID, tpID, delTcontMsg.TpPath,
cResourceTcont, delTcontMsg.AllocId, &wg)
// Removal of the tcont/alloc id mapping represents the removal of the tech profile
go pDevEntry.updateOnuKvStore(log.WithSpanFromContext(dctx, ctx), &wg)
dh.waitForCompletion(ctx, cancel, &wg, "TContDelete") //wait for background process to finish
return dh.combineErrorStrings(dh.pOnuTP.getTpProcessingErrorIndication(uniID, tpID), pDevEntry.getKvProcessingErrorIndication())
}
return nil
}
//processInterAdapterMessage sends the proxied messages to the target device
// If the proxy address is not found in the unmarshalled message, it first fetches the onu device for which the message
// is meant, and then send the unmarshalled omci message to this onu
func (dh *deviceHandler) processInterAdapterMessage(ctx context.Context, msg *ic.InterAdapterMessage) error {
msgID := msg.Header.Id
msgType := msg.Header.Type
fromTopic := msg.Header.FromTopic
toTopic := msg.Header.ToTopic
toDeviceID := msg.Header.ToDeviceId
proxyDeviceID := msg.Header.ProxyDeviceId
logger.Debugw(ctx, "InterAdapter message header", log.Fields{"msgID": msgID, "msgType": msgType,
"fromTopic": fromTopic, "toTopic": toTopic, "toDeviceID": toDeviceID, "proxyDeviceID": proxyDeviceID})
switch msgType {
// case ic.InterAdapterMessageType_ONU_IND_REQUEST: was handled by OpenONUAC already - see comments there
//OMCI_RESPONSE also accepted acc. to VOL-3756 (OMCI_REQUEST request was legacy code)
case ic.InterAdapterMessageType_OMCI_RESPONSE, ic.InterAdapterMessageType_OMCI_REQUEST:
{
return dh.processInterAdapterOMCIReceiveMessage(ctx, msg)
}
case ic.InterAdapterMessageType_TECH_PROFILE_DOWNLOAD_REQUEST:
{
return dh.processInterAdapterTechProfileDownloadReqMessage(ctx, msg)
}
case ic.InterAdapterMessageType_DELETE_GEM_PORT_REQUEST:
{
return dh.processInterAdapterDeleteGemPortReqMessage(ctx, msg)
}
case ic.InterAdapterMessageType_DELETE_TCONT_REQUEST:
{
return dh.processInterAdapterDeleteTcontReqMessage(ctx, msg)
}
default:
{
logger.Errorw(ctx, "inter-adapter-unhandled-type", log.Fields{
"msgType": msg.Header.Type, "device-id": dh.deviceID})
return fmt.Errorf("inter-adapter-unhandled-type: %d, %s", msg.Header.Type, dh.deviceID)
}
}
}
//FlowUpdateIncremental removes and/or adds the flow changes on a given device
func (dh *deviceHandler) FlowUpdateIncremental(ctx context.Context,
apOfFlowChanges *openflow_13.FlowChanges,
apOfGroupChanges *openflow_13.FlowGroupChanges, apFlowMetaData *voltha.FlowMetadata) error {
logger.Debugw(ctx, "FlowUpdateIncremental started", log.Fields{"device-id": dh.deviceID})
var retError error = nil
//Remove flows (always remove flows first - remove old and add new with same cookie may be part of the same request)
if apOfFlowChanges.ToRemove != nil {
for _, flowItem := range apOfFlowChanges.ToRemove.Items {
if flowItem.GetCookie() == 0 {
logger.Warnw(ctx, "flow-remove no cookie: ignore and continuing on checking further flows", log.Fields{
"device-id": dh.deviceID})
retError = fmt.Errorf("flow-remove no cookie, device-id %s", dh.deviceID)
continue
}
flowInPort := flow.GetInPort(flowItem)
if flowInPort == uint32(of.OfpPortNo_OFPP_INVALID) {
logger.Warnw(ctx, "flow-remove inPort invalid: ignore and continuing on checking further flows", log.Fields{"device-id": dh.deviceID})
retError = fmt.Errorf("flow-remove inPort invalid, device-id %s", dh.deviceID)
continue
//return fmt.Errorf("flow inPort invalid: %s", dh.deviceID)
} else if flowInPort == dh.ponPortNumber {
//this is some downstream flow, not regarded as error, just ignored
logger.Debugw(ctx, "flow-remove for downstream: ignore and continuing on checking further flows", log.Fields{
"device-id": dh.deviceID, "inPort": flowInPort})
continue
} else {
// this is the relevant upstream flow
var loUniPort *onuUniPort
if uniPort, exist := dh.uniEntityMap[flowInPort]; exist {
loUniPort = uniPort
} else {
logger.Warnw(ctx, "flow-remove inPort not found in UniPorts: ignore and continuing on checking further flows",
log.Fields{"device-id": dh.deviceID, "inPort": flowInPort})
retError = fmt.Errorf("flow-remove inPort not found in UniPorts, inPort %d, device-id %s",
flowInPort, dh.deviceID)
continue
}
flowOutPort := flow.GetOutPort(flowItem)
logger.Debugw(ctx, "flow-remove port indications", log.Fields{
"device-id": dh.deviceID, "inPort": flowInPort, "outPort": flowOutPort,
"uniPortName": loUniPort.name})
err := dh.removeFlowItemFromUniPort(ctx, flowItem, loUniPort)
//try next flow after processing error
if err != nil {
logger.Warnw(ctx, "flow-remove processing error: continuing on checking further flows",
log.Fields{"device-id": dh.deviceID, "error": err})
retError = err
continue
//return err
} else { // if last setting succeeds, overwrite possibly previously set error
retError = nil
}
}
}
}
if apOfFlowChanges.ToAdd != nil {
for _, flowItem := range apOfFlowChanges.ToAdd.Items {
if flowItem.GetCookie() == 0 {
logger.Debugw(ctx, "incremental flow-add no cookie: ignore and continuing on checking further flows", log.Fields{
"device-id": dh.deviceID})
retError = fmt.Errorf("flow-add no cookie, device-id %s", dh.deviceID)
continue
}
flowInPort := flow.GetInPort(flowItem)
if flowInPort == uint32(of.OfpPortNo_OFPP_INVALID) {
logger.Warnw(ctx, "flow-add inPort invalid: ignore and continuing on checking further flows", log.Fields{"device-id": dh.deviceID})
retError = fmt.Errorf("flow-add inPort invalid, device-id %s", dh.deviceID)
continue
//return fmt.Errorf("flow inPort invalid: %s", dh.deviceID)
} else if flowInPort == dh.ponPortNumber {
//this is some downstream flow
logger.Debugw(ctx, "flow-add for downstream: ignore and continuing on checking further flows", log.Fields{
"device-id": dh.deviceID, "inPort": flowInPort})
continue
} else {
// this is the relevant upstream flow
var loUniPort *onuUniPort
if uniPort, exist := dh.uniEntityMap[flowInPort]; exist {
loUniPort = uniPort
} else {
logger.Warnw(ctx, "flow-add inPort not found in UniPorts: ignore and continuing on checking further flows",
log.Fields{"device-id": dh.deviceID, "inPort": flowInPort})
retError = fmt.Errorf("flow-add inPort not found in UniPorts, inPort %d, device-id %s",
flowInPort, dh.deviceID)
continue
//return fmt.Errorf("flow-parameter inPort %d not found in internal UniPorts", flowInPort)
}
// let's still assume that we receive the flow-add only in some 'active' device state (as so far observed)
// if not, we just throw some error here to have an indication about that, if we really need to support that
// then we would need to create some means to activate the internal stored flows
// after the device gets active automatically (and still with its dependency to the TechProfile)
// for state checking compare also code here: processInterAdapterTechProfileDownloadReqMessage
// also abort for the other still possible flows here
if !dh.isReadyForOmciConfig() {
logger.Errorw(ctx, "flow-add rejected: improper device state", log.Fields{"device-id": dh.deviceID,
"last device-reason": dh.getDeviceReasonString()})
return fmt.Errorf("improper device state on device %s", dh.deviceID)
}
flowOutPort := flow.GetOutPort(flowItem)
logger.Debugw(ctx, "flow-add port indications", log.Fields{
"device-id": dh.deviceID, "inPort": flowInPort, "outPort": flowOutPort,
"uniPortName": loUniPort.name})
err := dh.addFlowItemToUniPort(ctx, flowItem, loUniPort)
//try next flow after processing error
if err != nil {
logger.Warnw(ctx, "flow-add processing error: continuing on checking further flows",
log.Fields{"device-id": dh.deviceID, "error": err})
retError = err
continue
//return err
} else { // if last setting succeeds, overwrite possibly previously set error
retError = nil
}
}
}
}
return retError
}
//disableDevice locks the ONU and its UNI/VEIP ports (admin lock via OMCI)
//following are the expected device states after this activity:
//Device Admin-State : down (on rwCore), Port-State: UNKNOWN, Conn-State: REACHABLE, Reason: omci-admin-lock
// (Conn-State: REACHABLE might conflict with some previous ONU Down indication - maybe to be resolved later)
func (dh *deviceHandler) disableDevice(ctx context.Context, device *voltha.Device) {
logger.Debugw(ctx, "disable-device", log.Fields{"device-id": device.Id, "SerialNumber": device.SerialNumber})
//admin-lock reason can also be used uniquely for setting the DeviceState accordingly
//note that disableDevice sequences in some 'ONU active' state may yield also
// "tech...delete-success" or "omci-flow-deleted" according to further received requests in the end
// - inblock state checking to prevent possibly unneeded processing (on command repitition)
if dh.getDeviceReason() != drOmciAdminLock {
//disable-device shall be just a UNi/ONU-G related admin state setting
//all other configurations/FSM's shall not be impacted and shall execute as required by the system
if dh.isReadyForOmciConfig() {
// disable UNI ports/ONU
// *** should generate UniDisableStateDone event - used to disable the port(s) on success
if dh.pLockStateFsm == nil {
dh.createUniLockFsm(ctx, true, UniDisableStateDone)
} else { //LockStateFSM already init
dh.pLockStateFsm.setSuccessEvent(UniDisableStateDone)
dh.runUniLockFsm(ctx, true)
}
} else {
logger.Debugw(ctx, "DeviceStateUpdate upon disable", log.Fields{"ConnectStatus": voltha.ConnectStatus_REACHABLE,
"OperStatus": voltha.OperStatus_UNKNOWN, "device-id": dh.deviceID})
if err := dh.coreProxy.DeviceStateUpdate(log.WithSpanFromContext(context.TODO(), ctx),
dh.deviceID, voltha.ConnectStatus_REACHABLE, voltha.OperStatus_UNKNOWN); err != nil {
//TODO with VOL-3045/VOL-3046: return the error and stop further processing
logger.Errorw(ctx, "error-updating-device-state", log.Fields{"device-id": dh.deviceID, "error": err})
}
// DeviceReason to update acc.to modified py code as per beginning of Sept 2020
//TODO with VOL-3045/VOL-3046: catch and return error, valid for all occurrences in the codebase
_ = dh.deviceReasonUpdate(ctx, drOmciAdminLock, true)
}
}
}
//reEnableDevice unlocks the ONU and its UNI/VEIP ports (admin unlock via OMCI)
func (dh *deviceHandler) reEnableDevice(ctx context.Context, device *voltha.Device) {
logger.Debugw(ctx, "reenable-device", log.Fields{"device-id": device.Id, "SerialNumber": device.SerialNumber})
//setting readyForOmciConfig here is just a workaround for BBSIM testing in the sequence
// OnuSoftReboot-disable-enable, because BBSIM does not generate a new OnuIndication-Up event after SoftReboot
// which is the assumption for real ONU's, where the ready-state is then set according to the following MibUpload/Download
// for real ONU's that should have nearly no influence
// Note that for real ONU's there is anyway a problematic situation with following sequence:
// OnuIndication-Dw (or not active at all) (- disable) - enable: here already the LockFsm may run into timeout (no OmciResponse)
// but that anyway is hopefully resolved by some OnuIndication-Up event (maybe to be tested)
// one could also argue, that a device-enable should also enable attempts for specific omci configuration
dh.setReadyForOmciConfig(true) //needed to allow subsequent flow/techProf config (on BBSIM)
// enable ONU/UNI ports
// *** should generate UniEnableStateDone event - used to disable the port(s) on success
if dh.pUnlockStateFsm == nil {
dh.createUniLockFsm(ctx, false, UniEnableStateDone)
} else { //UnlockStateFSM already init
dh.pUnlockStateFsm.setSuccessEvent(UniEnableStateDone)
dh.runUniLockFsm(ctx, false)
}
}
func (dh *deviceHandler) reconcileDeviceOnuInd(ctx context.Context) {
logger.Debugw(ctx, "reconciling - simulate onu indication", log.Fields{"device-id": dh.deviceID})
pDevEntry := dh.getOnuDeviceEntry(ctx, true)
if pDevEntry == nil {
logger.Errorw(ctx, "No valid OnuDevice - aborting", log.Fields{"device-id": dh.deviceID})
return
}
if err := pDevEntry.restoreDataFromOnuKvStore(log.WithSpanFromContext(context.TODO(), ctx)); err != nil {
if err == fmt.Errorf("no-ONU-data-found") {
logger.Debugw(ctx, "no persistent data found - abort reconciling", log.Fields{"device-id": dh.deviceID})
} else {
logger.Errorw(ctx, "reconciling - restoring OnuTp-data failed - abort", log.Fields{"err": err, "device-id": dh.deviceID})
}
dh.stopReconciling(ctx)
return
}
var onuIndication oop.OnuIndication
pDevEntry.mutexPersOnuConfig.RLock()
onuIndication.IntfId = pDevEntry.sOnuPersistentData.PersIntfID
onuIndication.OnuId = pDevEntry.sOnuPersistentData.PersOnuID
onuIndication.OperState = pDevEntry.sOnuPersistentData.PersOperState
onuIndication.AdminState = pDevEntry.sOnuPersistentData.PersAdminState
pDevEntry.mutexPersOnuConfig.RUnlock()
_ = dh.createInterface(ctx, &onuIndication)
}
func (dh *deviceHandler) reconcileDeviceTechProf(ctx context.Context) {
logger.Debugw(ctx, "reconciling - trigger tech profile config", log.Fields{"device-id": dh.deviceID})
pDevEntry := dh.getOnuDeviceEntry(ctx, true)
if pDevEntry == nil {
logger.Errorw(ctx, "No valid OnuDevice - aborting", log.Fields{"device-id": dh.deviceID})
if !dh.isSkipOnuConfigReconciling() {
dh.stopReconciling(ctx)
}
return
}
dh.pOnuTP.lockTpProcMutex()
defer dh.pOnuTP.unlockTpProcMutex()
pDevEntry.mutexPersOnuConfig.RLock()
defer pDevEntry.mutexPersOnuConfig.RUnlock()
if len(pDevEntry.sOnuPersistentData.PersUniConfig) == 0 {
logger.Debugw(ctx, "reconciling - no uni-configs have been stored before adapter restart - terminate reconcilement",
log.Fields{"device-id": dh.deviceID})
if !dh.isSkipOnuConfigReconciling() {
dh.stopReconciling(ctx)
}
return
}
techProfsFound := false
flowsFound := false
for _, uniData := range pDevEntry.sOnuPersistentData.PersUniConfig {
//TODO: check for uni-port specific reconcilement in case of multi-uni-port-per-onu-support
if len(uniData.PersTpPathMap) == 0 {
logger.Debugw(ctx, "reconciling - no TPs stored for uniID",
log.Fields{"uni-id": uniData.PersUniID, "device-id": dh.deviceID})
continue
}
techProfsFound = true
for tpID := range uniData.PersTpPathMap {
// deadline context to ensure completion of background routines waited for
//20200721: 10s proved to be less in 8*8 ONU test on local vbox machine with debug, might be further adapted
deadline := time.Now().Add(dh.pOpenOnuAc.maxTimeoutInterAdapterComm) //allowed run time to finish before execution
dctx, cancel := context.WithDeadline(ctx, deadline)
dh.pOnuTP.resetTpProcessingErrorIndication(uniData.PersUniID, tpID)
var wg sync.WaitGroup
wg.Add(1) // for the 1 go routine to finish
go dh.pOnuTP.configureUniTp(log.WithSpanFromContext(dctx, ctx), uniData.PersUniID, uniData.PersTpPathMap[tpID], &wg)
dh.waitForCompletion(ctx, cancel, &wg, "TechProfReconcile") //wait for background process to finish
if err := dh.pOnuTP.getTpProcessingErrorIndication(uniData.PersUniID, tpID); err != nil {
logger.Errorw(ctx, err.Error(), log.Fields{"device-id": dh.deviceID})
}
}
if len(uniData.PersFlowParams) != 0 {
flowsFound = true
}
}
if !techProfsFound {
logger.Debugw(ctx, "reconciling - no TPs have been stored before adapter restart - terminate reconcilement",
log.Fields{"device-id": dh.deviceID})
if !dh.isSkipOnuConfigReconciling() {
dh.stopReconciling(ctx)
}
return
}
if dh.isSkipOnuConfigReconciling() {
dh.setDeviceReason(drTechProfileConfigDownloadSuccess)
}
if !flowsFound {
logger.Debugw(ctx, "reconciling - no flows have been stored before adapter restart - terminate reconcilement",
log.Fields{"device-id": dh.deviceID})
if !dh.isSkipOnuConfigReconciling() {
dh.stopReconciling(ctx)
}
}
}
func (dh *deviceHandler) reconcileDeviceFlowConfig(ctx context.Context) {
logger.Debugw(ctx, "reconciling - trigger flow config", log.Fields{"device-id": dh.deviceID})
pDevEntry := dh.getOnuDeviceEntry(ctx, true)
if pDevEntry == nil {
logger.Errorw(ctx, "No valid OnuDevice - aborting", log.Fields{"device-id": dh.deviceID})
if !dh.isSkipOnuConfigReconciling() {
dh.stopReconciling(ctx)
}
return
}
pDevEntry.mutexPersOnuConfig.RLock()
defer pDevEntry.mutexPersOnuConfig.RUnlock()
if len(pDevEntry.sOnuPersistentData.PersUniConfig) == 0 {
logger.Debugw(ctx, "reconciling - no uni-configs have been stored before adapter restart - terminate reconcilement",
log.Fields{"device-id": dh.deviceID})
if !dh.isSkipOnuConfigReconciling() {
dh.stopReconciling(ctx)
}
return
}
flowsFound := false
for _, uniData := range pDevEntry.sOnuPersistentData.PersUniConfig {
//TODO: check for uni-port specific reconcilement in case of multi-uni-port-per-onu-support
if len(uniData.PersFlowParams) == 0 {
logger.Debugw(ctx, "reconciling - no flows stored for uniID",
log.Fields{"uni-id": uniData.PersUniID, "device-id": dh.deviceID})
continue
}
if len(uniData.PersTpPathMap) == 0 {
logger.Warnw(ctx, "reconciling - flows but no TPs stored for uniID",
log.Fields{"uni-id": uniData.PersUniID, "device-id": dh.deviceID})
// It doesn't make sense to configure any flows if no TPs are available
continue
}
var uniPort *onuUniPort
var exist bool
uniNo := mkUniPortNum(ctx, dh.pOnuIndication.GetIntfId(), dh.pOnuIndication.GetOnuId(), uint32(uniData.PersUniID))
if uniPort, exist = dh.uniEntityMap[uniNo]; !exist {
logger.Errorw(ctx, "reconciling - onuUniPort data not found - terminate reconcilement",
log.Fields{"uniNo": uniNo, "device-id": dh.deviceID})
if !dh.isSkipOnuConfigReconciling() {
dh.stopReconciling(ctx)
}
return
}
flowsFound = true
lastFlowToReconcile := false
flowsProcessed := 0
dh.setReconcilingFlows(true)
for _, flowData := range uniData.PersFlowParams {
logger.Debugw(ctx, "reconciling - add flow with cookie slice", log.Fields{"device-id": dh.deviceID, "cookies": flowData.CookieSlice})
// If this is the last flow for the device we need to announce it the waiting
// chReconcilingFlowsFinished channel
if flowsProcessed == len(uniData.PersFlowParams)-1 {
lastFlowToReconcile = true
}
//the slice can be passed 'by value' here, - which internally passes its reference copy
dh.lockVlanConfig.RLock()
if _, exist = dh.UniVlanConfigFsmMap[uniData.PersUniID]; exist {
if err := dh.UniVlanConfigFsmMap[uniData.PersUniID].SetUniFlowParams(ctx, flowData.VlanRuleParams.TpID,
flowData.CookieSlice, uint16(flowData.VlanRuleParams.MatchVid), uint16(flowData.VlanRuleParams.SetVid),
uint8(flowData.VlanRuleParams.SetPcp), lastFlowToReconcile); err != nil {
logger.Errorw(ctx, err.Error(), log.Fields{"device-id": dh.deviceID})
}
dh.lockVlanConfig.RUnlock()
} else {
dh.lockVlanConfig.RUnlock()
if err := dh.createVlanFilterFsm(ctx, uniPort, flowData.VlanRuleParams.TpID, flowData.CookieSlice,
uint16(flowData.VlanRuleParams.MatchVid), uint16(flowData.VlanRuleParams.SetVid),
uint8(flowData.VlanRuleParams.SetPcp), OmciVlanFilterAddDone, lastFlowToReconcile); err != nil {
logger.Errorw(ctx, err.Error(), log.Fields{"device-id": dh.deviceID})
}
}
flowsProcessed++
}
logger.Debugw(ctx, "reconciling - flows processed", log.Fields{"device-id": dh.deviceID, "flowsProcessed": flowsProcessed,
"numUniFlows": dh.UniVlanConfigFsmMap[uniData.PersUniID].numUniFlows,
"configuredUniFlow": dh.UniVlanConfigFsmMap[uniData.PersUniID].configuredUniFlow})
// this can't be used as global finished reconciling flag because
// assumes is getting called before the state machines for the last flow is completed,
// while this is not guaranteed.
//dh.setReconcilingFlows(false)
}
if !flowsFound {
logger.Debugw(ctx, "reconciling - no flows have been stored before adapter restart - terminate reconcilement",
log.Fields{"device-id": dh.deviceID})
if !dh.isSkipOnuConfigReconciling() {
dh.stopReconciling(ctx)
}
return
}
if dh.isSkipOnuConfigReconciling() {
dh.setDeviceReason(drOmciFlowsPushed)
}
}
func (dh *deviceHandler) reconcileEnd(ctx context.Context) {
logger.Debugw(ctx, "reconciling - completed!", log.Fields{"device-id": dh.deviceID})
dh.stopReconciling(ctx)
}
func (dh *deviceHandler) deleteDevicePersistencyData(ctx context.Context) error {
logger.Debugw(ctx, "delete device persistency data", log.Fields{"device-id": dh.deviceID})
pDevEntry := dh.getOnuDeviceEntry(ctx, false)
if pDevEntry == nil {
//IfDevEntry does not exist here, no problem - no persistent data should have been stored
logger.Debugw(ctx, "OnuDevice does not exist - nothing to delete", log.Fields{"device-id": dh.deviceID})
return nil
}
// deadline context to ensure completion of background routines waited for
//20200721: 10s proved to be less in 8*8 ONU test on local vbox machine with debug, might be further adapted
deadline := time.Now().Add(dh.pOpenOnuAc.maxTimeoutInterAdapterComm) //allowed run time to finish before execution
dctx, cancel := context.WithDeadline(ctx, deadline)
pDevEntry.resetKvProcessingErrorIndication()
var wg sync.WaitGroup
wg.Add(1) // for the 1 go routine to finish
go pDevEntry.deleteDataFromOnuKvStore(log.WithSpanFromContext(dctx, ctx), &wg)
dh.waitForCompletion(ctx, cancel, &wg, "DeleteDevice") //wait for background process to finish
// TODO: further actions - stop metrics and FSMs, remove device ...
return pDevEntry.getKvProcessingErrorIndication()
}
//func (dh *deviceHandler) rebootDevice(ctx context.Context, device *voltha.Device) error {
// before this change here return like this was used:
// return fmt.Errorf("device-unreachable: %s, %s", dh.deviceID, device.SerialNumber)
//was and is called in background - error return does not make sense
func (dh *deviceHandler) rebootDevice(ctx context.Context, aCheckDeviceState bool, device *voltha.Device) {
logger.Infow(ctx, "reboot-device", log.Fields{"device-id": dh.deviceID, "SerialNumber": dh.device.SerialNumber})
if aCheckDeviceState && device.ConnectStatus != voltha.ConnectStatus_REACHABLE {
logger.Errorw(ctx, "device-unreachable", log.Fields{"device-id": device.Id, "SerialNumber": device.SerialNumber})
return
}
if err := dh.pOnuOmciDevice.reboot(log.WithSpanFromContext(context.TODO(), ctx)); err != nil {
//TODO with VOL-3045/VOL-3046: return the error and stop further processing
logger.Errorw(ctx, "error-rebooting-device", log.Fields{"device-id": dh.deviceID, "error": err})
return
}
//transfer the possibly modified logical uni port state
dh.disableUniPortStateUpdate(ctx)
logger.Debugw(ctx, "call DeviceStateUpdate upon reboot", log.Fields{"ConnectStatus": voltha.ConnectStatus_REACHABLE,
"OperStatus": voltha.OperStatus_DISCOVERED, "device-id": dh.deviceID})
if err := dh.coreProxy.DeviceStateUpdate(log.WithSpanFromContext(context.TODO(), ctx), dh.deviceID, voltha.ConnectStatus_REACHABLE,
voltha.OperStatus_DISCOVERED); err != nil {
//TODO with VOL-3045/VOL-3046: return the error and stop further processing
logger.Errorw(ctx, "error-updating-device-state", log.Fields{"device-id": dh.deviceID, "error": err})
return
}
if err := dh.deviceReasonUpdate(ctx, drRebooting, true); err != nil {
return
}
dh.setReadyForOmciConfig(false)
//no specific activity to synchronize any internal FSM to the 'rebooted' state is explicitly done here
// the expectation ids for a real device, that it will be synced with the expected following 'down' indication
// as BBSIM does not support this testing requires explicite disable/enable device calls in which sequence also
// all other FSM's should be synchronized again
}
//doOnuSwUpgrade initiates the SW download transfer to the ONU and on success activates the (inactive) image
func (dh *deviceHandler) doOnuSwUpgrade(ctx context.Context, apImageDsc *voltha.ImageDownload,
apDownloadManager *adapterDownloadManager) error {
logger.Debugw(ctx, "onuSwUpgrade requested", log.Fields{
"device-id": dh.deviceID, "image-name": (*apImageDsc).Name})
var err error
pDevEntry := dh.getOnuDeviceEntry(ctx, true)
if pDevEntry == nil {
logger.Errorw(ctx, "start Onu SW upgrade rejected: no valid OnuDevice", log.Fields{"device-id": dh.deviceID})
return fmt.Errorf("start Onu SW upgrade rejected: no valid OnuDevice for device-id: %s", dh.deviceID)
}
if dh.isReadyForOmciConfig() {
var inactiveImageID uint16
if inactiveImageID, err = pDevEntry.GetInactiveImageMeID(ctx); err == nil {
dh.lockUpgradeFsm.Lock()
defer dh.lockUpgradeFsm.Unlock()
if dh.pOnuUpradeFsm == nil {
err = dh.createOnuUpgradeFsm(ctx, pDevEntry, OmciOnuSwUpgradeDone)
if err == nil {
if err = dh.pOnuUpradeFsm.SetDownloadParams(ctx, inactiveImageID, apImageDsc, apDownloadManager); err != nil {
logger.Errorw(ctx, "onu upgrade fsm could not set parameters", log.Fields{
"device-id": dh.deviceID, "error": err})
}
} else {
logger.Errorw(ctx, "onu upgrade fsm could not be created", log.Fields{
"device-id": dh.deviceID, "error": err})
}
} else { //OnuSw upgrade already running - restart (with possible abort of running)
logger.Debugw(ctx, "Onu SW upgrade already running - abort", log.Fields{"device-id": dh.deviceID})
pUpgradeStatemachine := dh.pOnuUpradeFsm.pAdaptFsm.pFsm
if pUpgradeStatemachine != nil {
if err = pUpgradeStatemachine.Event(upgradeEvAbort); err != nil {
logger.Errorw(ctx, "onu upgrade fsm could not abort a running processing", log.Fields{
"device-id": dh.deviceID, "error": err})
}
err = fmt.Errorf("aborted Onu SW upgrade but not automatically started, try again, device-id: %s", dh.deviceID)
//TODO!!!: wait for 'ready' to start and configure - see above SetDownloadParams()
// for now a second start of download should work again
} else { //should never occur
logger.Errorw(ctx, "onu upgrade fsm inconsistent setup", log.Fields{
"device-id": dh.deviceID})
err = fmt.Errorf("onu upgrade fsm inconsistent setup, baseFsm invalid for device-id: %s", dh.deviceID)
}
}
} else {
logger.Errorw(ctx, "start Onu SW upgrade rejected: no inactive image", log.Fields{
"device-id": dh.deviceID, "error": err})
}
} else {
logger.Errorw(ctx, "start Onu SW upgrade rejected: no active OMCI connection", log.Fields{"device-id": dh.deviceID})
err = fmt.Errorf("start Onu SW upgrade rejected: no active OMCI connection for device-id: %s", dh.deviceID)
}
return err
}
//onuSwUpgradeAfterDownload initiates the SW download transfer to the ONU with activate and commit options
// after the OnuImage has been downloaded to the adapter, called in background
func (dh *deviceHandler) onuSwUpgradeAfterDownload(ctx context.Context, apImageRequest *voltha.DeviceImageDownloadRequest,
apDownloadManager *fileDownloadManager, aImageIdentifier string) {
var err error
pDevEntry := dh.getOnuDeviceEntry(ctx, true)
if pDevEntry == nil {
logger.Errorw(ctx, "start Onu SW upgrade rejected: no valid OnuDevice", log.Fields{"device-id": dh.deviceID})
return
}
var inactiveImageID uint16
if inactiveImageID, err = pDevEntry.GetInactiveImageMeID(ctx); err == nil {
logger.Debugw(ctx, "onuSwUpgrade requested", log.Fields{
"device-id": dh.deviceID, "image-version": apImageRequest.Image.Version, "to onu-image": inactiveImageID})
dh.lockUpgradeFsm.Lock()
defer dh.lockUpgradeFsm.Unlock()
if dh.pOnuUpradeFsm == nil {
//OmciOnuSwUpgradeDone could be used to create some Kafka event with information on upgrade completion,
// but none yet defined
err = dh.createOnuUpgradeFsm(ctx, pDevEntry, OmciOnuSwUpgradeDone)
if err == nil {
if err = dh.pOnuUpradeFsm.SetDownloadParamsAfterDownload(ctx, inactiveImageID,
apImageRequest, apDownloadManager, aImageIdentifier); err != nil {
logger.Errorw(ctx, "onu upgrade fsm could not set parameters", log.Fields{
"device-id": dh.deviceID, "error": err})
return
}
} else {
logger.Errorw(ctx, "onu upgrade fsm could not be created", log.Fields{
"device-id": dh.deviceID, "error": err})
}
return
}
//OnuSw upgrade already running - restart (with possible abort of running)
logger.Debugw(ctx, "Onu SW upgrade already running - abort", log.Fields{"device-id": dh.deviceID})
pUpgradeStatemachine := dh.pOnuUpradeFsm.pAdaptFsm.pFsm
if pUpgradeStatemachine != nil {
if err = pUpgradeStatemachine.Event(upgradeEvAbort); err != nil {
logger.Errorw(ctx, "onu upgrade fsm could not abort a running processing", log.Fields{
"device-id": dh.deviceID, "error": err})
return
}
//TODO!!!: wait for 'ready' to start and configure - see above SetDownloadParams()
// for now a second start of download should work again - must still be initiated by user
} else { //should never occur
logger.Errorw(ctx, "onu upgrade fsm inconsistent setup", log.Fields{
"device-id": dh.deviceID})
}
return
}
logger.Errorw(ctx, "start Onu SW upgrade rejected: no inactive image", log.Fields{
"device-id": dh.deviceID, "error": err})
}
//onuSwActivateRequest ensures activation of the requested image with commit options
func (dh *deviceHandler) onuSwActivateRequest(ctx context.Context,
aVersion string, aCommitRequest bool) (*voltha.ImageState, error) {
var err error
//SW activation for the ONU image may have two use cases, one of them is selected here according to following prioritization:
// 1.) activation of the image for a started upgrade process (in case the running upgrade runs on the requested image)
// 2.) activation of the inactive image
pDevEntry := dh.getOnuDeviceEntry(ctx, true)
if pDevEntry == nil {
logger.Errorw(ctx, "Onu image activation rejected: no valid OnuDevice", log.Fields{"device-id": dh.deviceID})
return nil, fmt.Errorf("no valid OnuDevice for device-id: %s", dh.deviceID)
}
dh.lockUpgradeFsm.RLock()
if dh.pOnuUpradeFsm != nil {
dh.lockUpgradeFsm.RUnlock()
onuVolthaDevice, getErr := dh.coreProxy.GetDevice(log.WithSpanFromContext(context.TODO(), ctx),
dh.deviceID, dh.deviceID)
if getErr != nil || onuVolthaDevice == nil {
logger.Errorw(ctx, "Failed to fetch Onu device for image activation", log.Fields{"device-id": dh.deviceID, "err": getErr})
return nil, fmt.Errorf("could not fetch device for device-id: %s", dh.deviceID)
}
// use the OnuVendor identification from this device for the internal unique name
imageIdentifier := onuVolthaDevice.VendorId + aVersion //head on vendor ID of the ONU
// 1.) check a started upgrade process and rely the activation request to it
if err = dh.pOnuUpradeFsm.SetActivationParamsRunning(ctx, imageIdentifier, aCommitRequest); err != nil {
//if some ONU upgrade is ongoing we do not accept some explicit ONU image-version related activation
logger.Errorw(ctx, "onu upgrade fsm did not accept activation while running", log.Fields{
"device-id": dh.deviceID, "error": err})
return nil, fmt.Errorf("activation not accepted for this version for device-id: %s", dh.deviceID)
}
logger.Debugw(ctx, "image activation acknowledged by onu upgrade processing", log.Fields{
"device-id": dh.deviceID, "image-id": imageIdentifier})
var pImageStates *voltha.ImageState
if pImageStates, err = dh.pOnuUpradeFsm.GetImageStates(ctx, "", aVersion); err != nil {
pImageStates = &voltha.ImageState{}
pImageStates.DownloadState = voltha.ImageState_DOWNLOAD_UNKNOWN
pImageStates.Reason = voltha.ImageState_UNKNOWN_ERROR
pImageStates.ImageState = voltha.ImageState_IMAGE_UNKNOWN
}
return pImageStates, nil
} //else
dh.lockUpgradeFsm.RUnlock()
// 2.) check if requested image-version equals the inactive one and start its activation
// (image version is not [yet] checked - would be possible, but with increased effort ...)
var inactiveImageID uint16
if inactiveImageID, err = pDevEntry.GetInactiveImageMeID(ctx); err != nil || inactiveImageID > 1 {
logger.Errorw(ctx, "get inactive image failed", log.Fields{
"device-id": dh.deviceID, "err": err, "image-id": inactiveImageID})
return nil, fmt.Errorf("no valid inactive image found for device-id: %s", dh.deviceID)
}
err = dh.createOnuUpgradeFsm(ctx, pDevEntry, OmciOnuSwUpgradeDone)
if err == nil {
if err = dh.pOnuUpradeFsm.SetActivationParamsStart(ctx, aVersion,
inactiveImageID, aCommitRequest); err != nil {
logger.Errorw(ctx, "onu upgrade fsm did not accept activation to start", log.Fields{
"device-id": dh.deviceID, "error": err})
return nil, fmt.Errorf("activation to start from scratch not accepted for device-id: %s", dh.deviceID)
}
logger.Debugw(ctx, "inactive image activation acknowledged by onu upgrade", log.Fields{
"device-id": dh.deviceID, "image-version": aVersion})
var pImageStates *voltha.ImageState
if pImageStates, err = dh.pOnuUpradeFsm.GetImageStates(ctx, "", aVersion); err != nil {
pImageStates := &voltha.ImageState{}
pImageStates.DownloadState = voltha.ImageState_DOWNLOAD_UNKNOWN
pImageStates.Reason = voltha.ImageState_UNKNOWN_ERROR
pImageStates.ImageState = voltha.ImageState_IMAGE_UNKNOWN
}
return pImageStates, nil
} //else
logger.Errorw(ctx, "onu upgrade fsm could not be created", log.Fields{
"device-id": dh.deviceID, "error": err})
return nil, fmt.Errorf("could not start upgradeFsm for device-id: %s", dh.deviceID)
}
//onuSwCommitRequest ensures commitment of the requested image
func (dh *deviceHandler) onuSwCommitRequest(ctx context.Context,
aVersion string) (*voltha.ImageState, error) {
var err error
//SW commitment for the ONU image may have two use cases, one of them is selected here according to following prioritization:
// 1.) commitment of the image for a started upgrade process (in case the running upgrade runs on the requested image)
// 2.) commitment of the active image
pDevEntry := dh.getOnuDeviceEntry(ctx, true)
if pDevEntry == nil {
logger.Errorw(ctx, "Onu image commitment rejected: no valid OnuDevice", log.Fields{"device-id": dh.deviceID})
return nil, fmt.Errorf("no valid OnuDevice for device-id: %s", dh.deviceID)
}
dh.lockUpgradeFsm.RLock()
if dh.pOnuUpradeFsm != nil {
dh.lockUpgradeFsm.RUnlock()
onuVolthaDevice, getErr := dh.coreProxy.GetDevice(log.WithSpanFromContext(context.TODO(), ctx),
dh.deviceID, dh.deviceID)
if getErr != nil || onuVolthaDevice == nil {
logger.Errorw(ctx, "Failed to fetch Onu device for image commitment", log.Fields{"device-id": dh.deviceID, "err": getErr})
return nil, fmt.Errorf("could not fetch device for device-id: %s", dh.deviceID)
}
// use the OnuVendor identification from this device for the internal unique name
imageIdentifier := onuVolthaDevice.VendorId + aVersion //head on vendor ID of the ONU
// 1.) check a started upgrade process and rely the commitment request to it
if err = dh.pOnuUpradeFsm.SetCommitmentParamsRunning(ctx, imageIdentifier); err != nil {
//if some ONU upgrade is ongoing we do not accept some explicit ONU image-version related commitment
logger.Errorw(ctx, "onu upgrade fsm did not accept commitment while running", log.Fields{
"device-id": dh.deviceID, "error": err})
return nil, fmt.Errorf("commitment not accepted for this version for device-id: %s", dh.deviceID)
}
logger.Debugw(ctx, "image commitment acknowledged by onu upgrade processing", log.Fields{
"device-id": dh.deviceID, "image-id": imageIdentifier})
var pImageStates *voltha.ImageState
if pImageStates, err = dh.pOnuUpradeFsm.GetImageStates(ctx, "", aVersion); err != nil {
pImageStates := &voltha.ImageState{}
pImageStates.DownloadState = voltha.ImageState_DOWNLOAD_UNKNOWN
pImageStates.Reason = voltha.ImageState_UNKNOWN_ERROR
pImageStates.ImageState = voltha.ImageState_IMAGE_UNKNOWN
}
return pImageStates, nil
} //else
dh.lockUpgradeFsm.RUnlock()
// 2.) use the active image to directly commit
var activeImageID uint16
if activeImageID, err = pDevEntry.GetActiveImageMeID(ctx); err != nil || activeImageID > 1 {
logger.Errorw(ctx, "get active image failed", log.Fields{
"device-id": dh.deviceID, "err": err, "image-id": activeImageID})
return nil, fmt.Errorf("no valid active image found for device-id: %s", dh.deviceID)
}
err = dh.createOnuUpgradeFsm(ctx, pDevEntry, OmciOnuSwUpgradeDone)
if err == nil {
if err = dh.pOnuUpradeFsm.SetCommitmentParamsStart(ctx, aVersion, activeImageID); err != nil {
logger.Errorw(ctx, "onu upgrade fsm did not accept commitment to start", log.Fields{
"device-id": dh.deviceID, "error": err})
return nil, fmt.Errorf("commitment to start from scratch not accepted for device-id: %s", dh.deviceID)
}
logger.Debugw(ctx, "active image commitment acknowledged by onu upgrade", log.Fields{
"device-id": dh.deviceID, "image-version": aVersion})
var pImageStates *voltha.ImageState
if pImageStates, err = dh.pOnuUpradeFsm.GetImageStates(ctx, "", aVersion); err != nil {
pImageStates := &voltha.ImageState{}
pImageStates.DownloadState = voltha.ImageState_DOWNLOAD_UNKNOWN
pImageStates.Reason = voltha.ImageState_UNKNOWN_ERROR
pImageStates.ImageState = voltha.ImageState_IMAGE_UNKNOWN
}
return pImageStates, nil
} //else
logger.Errorw(ctx, "onu upgrade fsm could not be created", log.Fields{
"device-id": dh.deviceID, "error": err})
return nil, fmt.Errorf("could not start upgradeFsm for device-id: %s", dh.deviceID)
}
func (dh *deviceHandler) requestOnuSwUpgradeState(ctx context.Context, aImageIdentifier string,
aVersion string, pDeviceImageState *voltha.DeviceImageState) {
pDeviceImageState.DeviceId = dh.deviceID
pDeviceImageState.ImageState.Version = aVersion
dh.lockUpgradeFsm.RLock()
if dh.pOnuUpradeFsm != nil {
dh.lockUpgradeFsm.RUnlock()
if pImageStates, err := dh.pOnuUpradeFsm.GetImageStates(ctx, aImageIdentifier, aVersion); err == nil {
pDeviceImageState.ImageState.DownloadState = pImageStates.DownloadState
pDeviceImageState.ImageState.Reason = pImageStates.Reason
pDeviceImageState.ImageState.ImageState = pImageStates.ImageState
} else {
pDeviceImageState.ImageState.DownloadState = voltha.ImageState_DOWNLOAD_UNKNOWN
pDeviceImageState.ImageState.Reason = voltha.ImageState_NO_ERROR
pDeviceImageState.ImageState.ImageState = voltha.ImageState_IMAGE_UNKNOWN
}
} else {
dh.lockUpgradeFsm.RUnlock()
pDeviceImageState.ImageState.Reason = voltha.ImageState_NO_ERROR
if dh.upgradeSuccess {
pDeviceImageState.ImageState.DownloadState = voltha.ImageState_DOWNLOAD_SUCCEEDED
pDeviceImageState.ImageState.ImageState = voltha.ImageState_IMAGE_COMMITTED
} else {
pDeviceImageState.ImageState.DownloadState = voltha.ImageState_DOWNLOAD_UNKNOWN
pDeviceImageState.ImageState.ImageState = voltha.ImageState_IMAGE_UNKNOWN
}
}
}
func (dh *deviceHandler) cancelOnuSwUpgrade(ctx context.Context, aImageIdentifier string,
aVersion string, pDeviceImageState *voltha.DeviceImageState) {
pDeviceImageState.DeviceId = dh.deviceID
pDeviceImageState.ImageState.Version = aVersion
pDeviceImageState.ImageState.ImageState = voltha.ImageState_IMAGE_UNKNOWN
dh.lockUpgradeFsm.RLock()
if dh.pOnuUpradeFsm != nil {
dh.lockUpgradeFsm.RUnlock()
//option: it could be also checked if the upgrade FSM is running on the given imageIdentifier or version
// by now just straightforward assume this to be true
dh.pOnuUpradeFsm.CancelProcessing(ctx)
//nolint:misspell
pDeviceImageState.ImageState.DownloadState = voltha.ImageState_DOWNLOAD_CANCELLED
//nolint:misspell
pDeviceImageState.ImageState.Reason = voltha.ImageState_CANCELLED_ON_REQUEST
} else {
dh.lockUpgradeFsm.RUnlock()
pDeviceImageState.ImageState.DownloadState = voltha.ImageState_DOWNLOAD_UNKNOWN
pDeviceImageState.ImageState.Reason = voltha.ImageState_NO_ERROR
}
}
func (dh *deviceHandler) getOnuImages(ctx context.Context) (*voltha.OnuImages, error) {
var onuImageStatus *OnuImageStatus
pDevEntry := dh.getOnuDeviceEntry(ctx, false)
if pDevEntry != nil {
onuImageStatus = NewOnuImageStatus(pDevEntry)
pDevEntry.mutexOnuImageStatus.Lock()
pDevEntry.pOnuImageStatus = onuImageStatus
pDevEntry.mutexOnuImageStatus.Unlock()
} else {
logger.Errorw(ctx, "No valid OnuDevice - aborting", log.Fields{"device-id": dh.deviceID})
return nil, fmt.Errorf("no-valid-OnuDevice-aborting")
}
images, err := onuImageStatus.getOnuImageStatus(ctx)
pDevEntry.mutexOnuImageStatus.Lock()
pDevEntry.pOnuImageStatus = nil
pDevEntry.mutexOnuImageStatus.Unlock()
return images, err
}
// deviceHandler methods that implement the adapters interface requests## end #########
// #####################################################################################
// ################ to be updated acc. needs of ONU Device ########################
// deviceHandler StateMachine related state transition methods ##### begin #########
func (dh *deviceHandler) logStateChange(ctx context.Context, e *fsm.Event) {
logger.Debugw(ctx, "Device FSM: ", log.Fields{"event name": string(e.Event), "src state": string(e.Src), "dst state": string(e.Dst), "device-id": dh.deviceID})
}
// doStateInit provides the device update to the core
func (dh *deviceHandler) doStateInit(ctx context.Context, e *fsm.Event) {
logger.Debug(ctx, "doStateInit-started")
var err error
// populate what we know. rest comes later after mib sync
dh.device.Root = false
dh.device.Vendor = "OpenONU"
dh.device.Model = "go"
dh.device.Reason = deviceReasonMap[drActivatingOnu]
dh.setDeviceReason(drActivatingOnu)
dh.logicalDeviceID = dh.deviceID // really needed - what for ??? //TODO!!!
if !dh.isReconciling() {
logger.Infow(ctx, "DeviceUpdate", log.Fields{"deviceReason": dh.device.Reason, "device-id": dh.deviceID})
_ = dh.coreProxy.DeviceUpdate(log.WithSpanFromContext(context.TODO(), ctx), dh.device)
//TODO Need to Update Device Reason To CORE as part of device update userstory
} else {
logger.Debugw(ctx, "reconciling - don't notify core about DeviceUpdate",
log.Fields{"device-id": dh.deviceID})
}
dh.parentID = dh.device.ParentId
dh.ponPortNumber = dh.device.ParentPortNo
// store proxy parameters for later communication - assumption: invariant, else they have to be requested dynamically!!
dh.ProxyAddressID = dh.device.ProxyAddress.GetDeviceId()
dh.ProxyAddressType = dh.device.ProxyAddress.GetDeviceType()
logger.Debugw(ctx, "device-updated", log.Fields{"device-id": dh.deviceID, "proxyAddressID": dh.ProxyAddressID,
"proxyAddressType": dh.ProxyAddressType, "SNR": dh.device.SerialNumber,
"ParentId": dh.parentID, "ParentPortNo": dh.ponPortNumber})
/*
self._pon = PonPort.create(self, self._pon_port_number)
self._pon.add_peer(self.parent_id, self._pon_port_number)
self.logger.debug('adding-pon-port-to-agent',
type=self._pon.get_port().type,
admin_state=self._pon.get_port().admin_state,
oper_status=self._pon.get_port().oper_status,
)
*/
if !dh.isReconciling() {
logger.Debugw(ctx, "adding-pon-port", log.Fields{"device-id": dh.deviceID, "ponPortNo": dh.ponPortNumber})
var ponPortNo uint32 = 1
if dh.ponPortNumber != 0 {
ponPortNo = dh.ponPortNumber
}
pPonPort := &voltha.Port{
PortNo: ponPortNo,
Label: fmt.Sprintf("pon-%d", ponPortNo),
Type: voltha.Port_PON_ONU,
OperStatus: voltha.OperStatus_ACTIVE,
Peers: []*voltha.Port_PeerPort{{DeviceId: dh.parentID, // Peer device is OLT
PortNo: ponPortNo}}, // Peer port is parent's port number
}
if err = dh.coreProxy.PortCreated(log.WithSpanFromContext(context.TODO(), ctx), dh.deviceID, pPonPort); err != nil {
logger.Fatalf(ctx, "Device FSM: PortCreated-failed-%s", err)
e.Cancel(err)
return
}
} else {
logger.Debugw(ctx, "reconciling - pon-port already added", log.Fields{"device-id": dh.deviceID})
}
logger.Debug(ctx, "doStateInit-done")
}
// postInit setups the DeviceEntry for the conerned device
func (dh *deviceHandler) postInit(ctx context.Context, e *fsm.Event) {
logger.Debug(ctx, "postInit-started")
var err error
/*
dh.Client = oop.NewOpenoltClient(dh.clientCon)
dh.pTransitionMap.Handle(ctx, GrpcConnected)
return nil
*/
if err = dh.addOnuDeviceEntry(log.WithSpanFromContext(context.TODO(), ctx)); err != nil {
logger.Fatalf(ctx, "Device FSM: addOnuDeviceEntry-failed-%s", err)
e.Cancel(err)
return
}
if dh.isReconciling() {
go dh.reconcileDeviceOnuInd(ctx)
// reconcilement will be continued after mib download is done
}
/*
############################################################################
# Setup Alarm handler
self.events = AdapterEvents(self.core_proxy, device.id, self.logical_device_id,
device.serial_number)
############################################################################
# Setup PM configuration for this device
# Pass in ONU specific options
kwargs = {
OnuPmMetrics.DEFAULT_FREQUENCY_KEY: OnuPmMetrics.DEFAULT_ONU_COLLECTION_FREQUENCY,
'heartbeat': self.heartbeat,
OnuOmciPmMetrics.OMCI_DEV_KEY: self._onu_omci_device
}
self.logger.debug('create-pm-metrics', device_id=device.id, serial_number=device.serial_number)
self._pm_metrics = OnuPmMetrics(self.events, self.core_proxy, self.device_id,
self.logical_device_id, device.serial_number,
grouped=True, freq_override=False, **kwargs)
pm_config = self._pm_metrics.make_proto()
self._onu_omci_device.set_pm_config(self._pm_metrics.omci_pm.openomci_interval_pm)
self.logger.info("initial-pm-config", device_id=device.id, serial_number=device.serial_number)
yield self.core_proxy.device_pm_config_update(pm_config, init=True)
# Note, ONU ID and UNI intf set in add_uni_port method
self._onu_omci_device.alarm_synchronizer.set_alarm_params(mgr=self.events,
ani_ports=[self._pon])
# Code to Run OMCI Test Action
kwargs_omci_test_action = {
OmciTestRequest.DEFAULT_FREQUENCY_KEY:
OmciTestRequest.DEFAULT_COLLECTION_FREQUENCY
}
serial_number = device.serial_number
self._test_request = OmciTestRequest(self.core_proxy,
self.omci_agent, self.device_id,
AniG, serial_number,
self.logical_device_id,
exclusive=False,
**kwargs_omci_test_action)
self.enabled = True
else:
self.logger.info('onu-already-activated')
*/
logger.Debug(ctx, "postInit-done")
}
// doStateConnected get the device info and update to voltha core
// for comparison of the original method (not that easy to uncomment): compare here:
// voltha-openolt-adapter/adaptercore/device_handler.go
// -> this one obviously initiates all communication interfaces of the device ...?
func (dh *deviceHandler) doStateConnected(ctx context.Context, e *fsm.Event) {
logger.Debug(ctx, "doStateConnected-started")
err := errors.New("device FSM: function not implemented yet")
e.Cancel(err)
logger.Debug(ctx, "doStateConnected-done")
}
// doStateUp handle the onu up indication and update to voltha core
func (dh *deviceHandler) doStateUp(ctx context.Context, e *fsm.Event) {
logger.Debug(ctx, "doStateUp-started")
err := errors.New("device FSM: function not implemented yet")
e.Cancel(err)
logger.Debug(ctx, "doStateUp-done")
/*
// Synchronous call to update device state - this method is run in its own go routine
if err := dh.coreProxy.DeviceStateUpdate(ctx, dh.device.Id, voltha.ConnectStatus_REACHABLE,
voltha.OperStatus_ACTIVE); err != nil {
logger.Errorw("Failed to update device with OLT UP indication", log.Fields{"device-id": dh.device.Id, "error": err})
return err
}
return nil
*/
}
// doStateDown handle the onu down indication
func (dh *deviceHandler) doStateDown(ctx context.Context, e *fsm.Event) {
logger.Debug(ctx, "doStateDown-started")
var err error
device := dh.device
if device == nil {
/*TODO: needs to handle error scenarios */
logger.Errorw(ctx, "Failed to fetch handler device", log.Fields{"device-id": dh.deviceID})
e.Cancel(err)
return
}
cloned := proto.Clone(device).(*voltha.Device)
logger.Debugw(ctx, "do-state-down", log.Fields{"ClonedDeviceID": cloned.Id})
/*
// Update the all ports state on that device to disable
if er := dh.coreProxy.PortsStateUpdate(ctx, cloned.Id, voltha.OperStatus_UNKNOWN); er != nil {
logger.Errorw("updating-ports-failed", log.Fields{"device-id": device.Id, "error": er})
return er
}
//Update the device oper state and connection status
cloned.OperStatus = voltha.OperStatus_UNKNOWN
cloned.ConnectStatus = common.ConnectStatus_UNREACHABLE
dh.device = cloned
if er := dh.coreProxy.DeviceStateUpdate(ctx, cloned.Id, cloned.ConnectStatus, cloned.OperStatus); er != nil {
logger.Errorw("error-updating-device-state", log.Fields{"device-id": device.Id, "error": er})
return er
}
//get the child device for the parent device
onuDevices, err := dh.coreProxy.GetChildDevices(ctx, dh.device.Id)
if err != nil {
logger.Errorw("failed to get child devices information", log.Fields{"device-id": dh.device.Id, "error": err})
return err
}
for _, onuDevice := range onuDevices.Items {
// Update onu state as down in onu adapter
onuInd := oop.OnuIndication{}
onuInd.OperState = "down"
er := dh.AdapterProxy.SendInterAdapterMessage(ctx, &onuInd, ic.InterAdapterMessageType_ONU_IND_REQUEST,
"openolt", onuDevice.Type, onuDevice.Id, onuDevice.ProxyAddress.DeviceId, "")
if er != nil {
logger.Errorw("Failed to send inter-adapter-message", log.Fields{"OnuInd": onuInd,
"From Adapter": "openolt", "DevieType": onuDevice.Type, "device-id": onuDevice.Id})
//Do not return here and continue to process other ONUs
}
}
// * Discovered ONUs entries need to be cleared , since after OLT
// is up, it starts sending discovery indications again* /
dh.discOnus = sync.Map{}
logger.Debugw("do-state-down-end", log.Fields{"device-id": device.Id})
return nil
*/
err = errors.New("device FSM: function not implemented yet")
e.Cancel(err)
logger.Debug(ctx, "doStateDown-done")
}
// deviceHandler StateMachine related state transition methods ##### end #########
// #################################################################################
// ###################################################
// deviceHandler utility methods ##### begin #########
//getOnuDeviceEntry gets the ONU device entry and may wait until its value is defined
func (dh *deviceHandler) getOnuDeviceEntry(ctx context.Context, aWait bool) *OnuDeviceEntry {
dh.lockDevice.RLock()
pOnuDeviceEntry := dh.pOnuOmciDevice
if aWait && pOnuDeviceEntry == nil {
//keep the read sema short to allow for subsequent write
dh.lockDevice.RUnlock()
logger.Debugw(ctx, "Waiting for DeviceEntry to be set ...", log.Fields{"device-id": dh.deviceID})
// based on concurrent processing the deviceEntry setup may not yet be finished at his point
// so it might be needed to wait here for that event with some timeout
select {
case <-time.After(60 * time.Second): //timer may be discussed ...
logger.Errorw(ctx, "No valid DeviceEntry set after maxTime", log.Fields{"device-id": dh.deviceID})
return nil
case <-dh.deviceEntrySet:
logger.Debugw(ctx, "devicEntry ready now - continue", log.Fields{"device-id": dh.deviceID})
// if written now, we can return the written value without sema
return dh.pOnuOmciDevice
}
}
dh.lockDevice.RUnlock()
return pOnuDeviceEntry
}
//setOnuDeviceEntry sets the ONU device entry within the handler
func (dh *deviceHandler) setOnuDeviceEntry(
apDeviceEntry *OnuDeviceEntry, apOnuTp *onuUniTechProf, apOnuMetricsMgr *onuMetricsManager, apOnuAlarmMgr *onuAlarmManager, apSelfTestHdlr *selfTestControlBlock) {
dh.lockDevice.Lock()
defer dh.lockDevice.Unlock()
dh.pOnuOmciDevice = apDeviceEntry
dh.pOnuTP = apOnuTp
dh.pOnuMetricsMgr = apOnuMetricsMgr
dh.pAlarmMgr = apOnuAlarmMgr
dh.pSelfTestHdlr = apSelfTestHdlr
}
//addOnuDeviceEntry creates a new ONU device or returns the existing
func (dh *deviceHandler) addOnuDeviceEntry(ctx context.Context) error {
logger.Debugw(ctx, "adding-deviceEntry", log.Fields{"device-id": dh.deviceID})
deviceEntry := dh.getOnuDeviceEntry(ctx, false)
if deviceEntry == nil {
/* costum_me_map in python code seems always to be None,
we omit that here first (declaration unclear) -> todo at Adapter specialization ...*/
/* also no 'clock' argument - usage open ...*/
/* and no alarm_db yet (oo.alarm_db) */
deviceEntry = newOnuDeviceEntry(ctx, dh)
onuTechProfProc := newOnuUniTechProf(ctx, dh)
onuMetricsMgr := newonuMetricsManager(ctx, dh)
onuAlarmManager := newAlarmManager(ctx, dh)
selfTestHdlr := newSelfTestMsgHandlerCb(ctx, dh)
//error treatment possible //TODO!!!
dh.setOnuDeviceEntry(deviceEntry, onuTechProfProc, onuMetricsMgr, onuAlarmManager, selfTestHdlr)
// fire deviceEntry ready event to spread to possibly waiting processing
dh.deviceEntrySet <- true
logger.Debugw(ctx, "onuDeviceEntry-added", log.Fields{"device-id": dh.deviceID})
} else {
logger.Debugw(ctx, "onuDeviceEntry-add: Device already exists", log.Fields{"device-id": dh.deviceID})
}
// might be updated with some error handling !!!
return nil
}
func (dh *deviceHandler) createInterface(ctx context.Context, onuind *oop.OnuIndication) error {
logger.Debugw(ctx, "create_interface-started", log.Fields{"OnuId": onuind.GetOnuId(),
"OnuIntfId": onuind.GetIntfId(), "OnuSerialNumber": onuind.GetSerialNumber()})
dh.pOnuIndication = onuind // let's revise if storing the pointer is sufficient...
pDevEntry := dh.getOnuDeviceEntry(ctx, true)
if pDevEntry == nil {
logger.Errorw(ctx, "No valid OnuDevice - aborting", log.Fields{"device-id": dh.deviceID})
return fmt.Errorf("no valid OnuDevice: %s", dh.deviceID)
}
if !dh.isReconciling() {
if err := dh.storePersistentData(ctx); err != nil {
logger.Warnw(ctx, "store persistent data error - continue as there will be additional write attempts",
log.Fields{"device-id": dh.deviceID, "err": err})
}
logger.Debugw(ctx, "call DeviceStateUpdate upon create interface", log.Fields{"ConnectStatus": voltha.ConnectStatus_REACHABLE,
"OperStatus": voltha.OperStatus_ACTIVATING, "device-id": dh.deviceID})
if err := dh.coreProxy.DeviceStateUpdate(log.WithSpanFromContext(context.TODO(), ctx), dh.deviceID,
voltha.ConnectStatus_REACHABLE, voltha.OperStatus_ACTIVATING); err != nil {
//TODO with VOL-3045/VOL-3046: return the error and stop further processing
logger.Errorw(ctx, "error-updating-device-state", log.Fields{"device-id": dh.deviceID, "error": err})
}
} else {
logger.Debugw(ctx, "reconciling - don't notify core about DeviceStateUpdate to ACTIVATING",
log.Fields{"device-id": dh.deviceID})
pDevEntry.mutexPersOnuConfig.RLock()
if !pDevEntry.sOnuPersistentData.PersUniUnlockDone {
pDevEntry.mutexPersOnuConfig.RUnlock()
logger.Debugw(ctx, "reconciling - uni-ports were not unlocked before adapter restart - resume with a normal start-up",
log.Fields{"device-id": dh.deviceID})
dh.stopReconciling(ctx)
} else {
pDevEntry.mutexPersOnuConfig.RUnlock()
}
}
// It does not look to me as if makes sense to work with the real core device here, (not the stored clone)?
// in this code the GetDevice would just make a check if the DeviceID's Device still exists in core
// in python code it looks as the started onu_omci_device might have been updated with some new instance state of the core device
// but I would not know why, and the go code anyway does not work with the device directly anymore in the OnuDeviceEntry
// so let's just try to keep it simple ...
/*
device, err := dh.coreProxy.GetDevice(log.WithSpanFromContext(context.TODO(), ctx), dh.device.Id, dh.device.Id)
if err != nil || device == nil {
//TODO: needs to handle error scenarios
logger.Errorw("Failed to fetch device device at creating If", log.Fields{"err": err})
return errors.New("Voltha Device not found")
}
*/
if err := pDevEntry.start(log.WithSpanFromContext(context.TODO(), ctx)); err != nil {
return err
}
_ = dh.deviceReasonUpdate(ctx, drStartingOpenomci, !dh.isReconciling())
/* this might be a good time for Omci Verify message? */
verifyExec := make(chan bool)
omciVerify := newOmciTestRequest(log.WithSpanFromContext(context.TODO(), ctx),
dh.device.Id, pDevEntry.PDevOmciCC,
true, true) //exclusive and allowFailure (anyway not yet checked)
omciVerify.performOmciTest(log.WithSpanFromContext(context.TODO(), ctx), verifyExec)
/* give the handler some time here to wait for the OMCi verification result
after Timeout start and try MibUpload FSM anyway
(to prevent stopping on just not supported OMCI verification from ONU) */
select {
case <-time.After(pDevEntry.PDevOmciCC.GetMaxOmciTimeoutWithRetries() * time.Second):
logger.Warn(ctx, "omci start-verification timed out (continue normal)")
case testresult := <-verifyExec:
logger.Infow(ctx, "Omci start verification done", log.Fields{"result": testresult})
}
/* In py code it looks earlier (on activate ..)
# Code to Run OMCI Test Action
kwargs_omci_test_action = {
OmciTestRequest.DEFAULT_FREQUENCY_KEY:
OmciTestRequest.DEFAULT_COLLECTION_FREQUENCY
}
serial_number = device.serial_number
self._test_request = OmciTestRequest(self.core_proxy,
self.omci_agent, self.device_id,
AniG, serial_number,
self.logical_device_id,
exclusive=False,
**kwargs_omci_test_action)
...
# Start test requests after a brief pause
if not self._test_request_started:
self._test_request_started = True
tststart = _STARTUP_RETRY_WAIT * (random.randint(1, 5))
reactor.callLater(tststart, self._test_request.start_collector)
*/
/* which is then: in omci_test_request.py : */
/*
def start_collector(self, callback=None):
"""
Start the collection loop for an adapter if the frequency > 0
:param callback: (callable) Function to call to collect PM data
"""
self.logger.info("starting-pm-collection", device_name=self.name, default_freq=self.default_freq)
if callback is None:
callback = self.perform_test_omci
if self.lc is None:
self.lc = LoopingCall(callback)
if self.default_freq > 0:
self.lc.start(interval=self.default_freq / 10)
def perform_test_omci(self):
"""
Perform the initial test request
"""
ani_g_entities = self._device.configuration.ani_g_entities
ani_g_entities_ids = list(ani_g_entities.keys()) if ani_g_entities \
is not None else None
self._entity_id = ani_g_entities_ids[0]
self.logger.info('perform-test', entity_class=self._entity_class,
entity_id=self._entity_id)
try:
frame = MEFrame(self._entity_class, self._entity_id, []).test()
result = yield self._device.omci_cc.send(frame)
if not result.fields['omci_message'].fields['success_code']:
self.logger.info('Self-Test Submitted Successfully',
code=result.fields[
'omci_message'].fields['success_code'])
else:
raise TestFailure('Test Failure: {}'.format(
result.fields['omci_message'].fields['success_code']))
except TimeoutError as e:
self.deferred.errback(failure.Failure(e))
except Exception as e:
self.logger.exception('perform-test-Error', e=e,
class_id=self._entity_class,
entity_id=self._entity_id)
self.deferred.errback(failure.Failure(e))
*/
// PM related heartbeat??? !!!TODO....
//self._heartbeat.enabled = True
/* Note: Even though FSM calls look 'synchronous' here, FSM is running in background with the effect that possible errors
* within the MibUpload are not notified in the OnuIndication response, this might be acceptable here,
* as further OltAdapter processing may rely on the deviceReason event 'MibUploadDone' as a result of the FSM processing
* otherwise some processing synchronization would be required - cmp. e.g TechProfile processing
*/
//call MibUploadFSM - transition up to state ulStInSync
pMibUlFsm := pDevEntry.pMibUploadFsm.pFsm
if pMibUlFsm != nil {
if pMibUlFsm.Is(ulStDisabled) {
if err := pMibUlFsm.Event(ulEvStart); err != nil {
logger.Errorw(ctx, "MibSyncFsm: Can't go to state starting", log.Fields{"device-id": dh.deviceID, "err": err})
return fmt.Errorf("can't go to state starting: %s", dh.deviceID)
}
logger.Debugw(ctx, "MibSyncFsm", log.Fields{"state": string(pMibUlFsm.Current())})
//Determine ONU status and start/re-start MIB Synchronization tasks
//Determine if this ONU has ever synchronized
if pDevEntry.isNewOnu() {
if err := pMibUlFsm.Event(ulEvResetMib); err != nil {
logger.Errorw(ctx, "MibSyncFsm: Can't go to state resetting_mib", log.Fields{"device-id": dh.deviceID, "err": err})
return fmt.Errorf("can't go to state resetting_mib: %s", dh.deviceID)
}
} else {
if err := pMibUlFsm.Event(ulEvExamineMds); err != nil {
logger.Errorw(ctx, "MibSyncFsm: Can't go to state examine_mds", log.Fields{"device-id": dh.deviceID, "err": err})
return fmt.Errorf("can't go to examine_mds: %s", dh.deviceID)
}
logger.Debugw(ctx, "state of MibSyncFsm", log.Fields{"state": string(pMibUlFsm.Current())})
}
} else {
logger.Errorw(ctx, "wrong state of MibSyncFsm - want: disabled", log.Fields{"have": string(pMibUlFsm.Current()),
"device-id": dh.deviceID})
return fmt.Errorf("wrong state of MibSyncFsm: %s", dh.deviceID)
}
} else {
logger.Errorw(ctx, "MibSyncFsm invalid - cannot be executed!!", log.Fields{"device-id": dh.deviceID})
return fmt.Errorf("can't execute MibSync: %s", dh.deviceID)
}
return nil
}
func (dh *deviceHandler) updateInterface(ctx context.Context, onuind *oop.OnuIndication) error {
//state checking to prevent unneeded processing (eg. on ONU 'unreachable' and 'down')
// (but note that the deviceReason may also have changed to e.g. TechProf*Delete_Success in between)
if dh.getDeviceReason() != drStoppingOpenomci {
logger.Debugw(ctx, "updateInterface-started - stopping-device", log.Fields{"device-id": dh.deviceID})
//stop all running FSM processing - make use of the DH-state as mirrored in the deviceReason
//here no conflict with aborted FSM's should arise as a complete OMCI initialization is assumed on ONU-Up
//but that might change with some simple MDS check on ONU-Up treatment -> attention!!!
if err := dh.resetFsms(ctx, true); err != nil {
logger.Errorw(ctx, "error-updateInterface at FSM stop",
log.Fields{"device-id": dh.deviceID, "error": err})
// abort: system behavior is just unstable ...
return err
}
//all stored persistent data are not valid anymore (loosing knowledge about the connected ONU)
_ = dh.deleteDevicePersistencyData(ctx) //ignore possible errors here and continue, hope is that data is synchronized with new ONU-Up
//deviceEntry stop without omciCC reset here, regarding the OMCI_CC still valid for this ONU
// - in contrary to disableDevice - compare with processUniDisableStateDoneEvent
//stop the device entry which resets the attached omciCC
pDevEntry := dh.getOnuDeviceEntry(ctx, false)
if pDevEntry == nil {
logger.Errorw(ctx, "No valid OnuDevice -aborting", log.Fields{"device-id": dh.deviceID})
return fmt.Errorf("no valid OnuDevice: %s", dh.deviceID)
}
_ = pDevEntry.stop(log.WithSpanFromContext(context.TODO(), ctx), false)
//TODO!!! remove existing traffic profiles
/* from py code, if TP's exist, remove them - not yet implemented
self._tp = dict()
# Let TP download happen again
for uni_id in self._tp_service_specific_task:
self._tp_service_specific_task[uni_id].clear()
for uni_id in self._tech_profile_download_done:
self._tech_profile_download_done[uni_id].clear()
*/
dh.disableUniPortStateUpdate(ctx)
dh.setReadyForOmciConfig(false)
if err := dh.deviceReasonUpdate(ctx, drStoppingOpenomci, true); err != nil {
// abort: system behavior is just unstable ...
return err
}
logger.Debugw(ctx, "call DeviceStateUpdate upon update interface", log.Fields{"ConnectStatus": voltha.ConnectStatus_UNREACHABLE,
"OperStatus": voltha.OperStatus_DISCOVERED, "device-id": dh.deviceID})
if err := dh.coreProxy.DeviceStateUpdate(log.WithSpanFromContext(context.TODO(), ctx), dh.deviceID,
voltha.ConnectStatus_UNREACHABLE, voltha.OperStatus_DISCOVERED); err != nil {
//TODO with VOL-3045/VOL-3046: return the error and stop further processing
logger.Errorw(ctx, "error-updating-device-state unreachable-discovered",
log.Fields{"device-id": dh.deviceID, "error": err})
// abort: system behavior is just unstable ...
return err
}
} else {
logger.Debugw(ctx, "updateInterface - device already stopped", log.Fields{"device-id": dh.deviceID})
}
return nil
}
func (dh *deviceHandler) resetFsms(ctx context.Context, includingMibSyncFsm bool) error {
//all possible FSM's are stopped or reset here to ensure their transition to 'disabled'
//it is not sufficient to stop/reset the latest running FSM as done in previous versions
// as after down/up procedures all FSM's might be active/ongoing (in theory)
// and using the stop/reset event should never harm
pDevEntry := dh.getOnuDeviceEntry(ctx, false)
if pDevEntry == nil {
logger.Errorw(ctx, "No valid OnuDevice -aborting", log.Fields{"device-id": dh.deviceID})
return fmt.Errorf("no valid OnuDevice: %s", dh.deviceID)
}
if pDevEntry.PDevOmciCC != nil {
pDevEntry.PDevOmciCC.CancelRequestMonitoring()
}
pDevEntry.mutexOnuImageStatus.RLock()
if pDevEntry.pOnuImageStatus != nil {
pDevEntry.pOnuImageStatus.CancelProcessing(ctx)
}
pDevEntry.mutexOnuImageStatus.RUnlock()
if includingMibSyncFsm {
pDevEntry.CancelProcessing(ctx)
}
//MibDownload may run
pMibDlFsm := pDevEntry.pMibDownloadFsm.pFsm
if pMibDlFsm != nil {
_ = pMibDlFsm.Event(dlEvReset)
}
//port lock/unlock FSM's may be active
if dh.pUnlockStateFsm != nil {
_ = dh.pUnlockStateFsm.pAdaptFsm.pFsm.Event(uniEvReset)
}
if dh.pLockStateFsm != nil {
_ = dh.pLockStateFsm.pAdaptFsm.pFsm.Event(uniEvReset)
}
//techProfile related PonAniConfigFsm FSM may be active
if dh.pOnuTP != nil {
// should always be the case here
// FSM stop maybe encapsulated as OnuTP method - perhaps later in context of module splitting
if dh.pOnuTP.pAniConfigFsm != nil {
for uniTP := range dh.pOnuTP.pAniConfigFsm {
dh.pOnuTP.pAniConfigFsm[uniTP].CancelProcessing(ctx)
}
}
for _, uniPort := range dh.uniEntityMap {
// reset the possibly existing VlanConfigFsm
dh.lockVlanConfig.RLock()
if pVlanFilterFsm, exist := dh.UniVlanConfigFsmMap[uniPort.uniID]; exist {
//VlanFilterFsm exists and was already started
dh.lockVlanConfig.RUnlock()
//reset of all Fsm is always accompanied by global persistency data removal
// no need to remove specific data
pVlanFilterFsm.RequestClearPersistency(false)
//ensure the FSM processing is stopped in case waiting for some response
pVlanFilterFsm.CancelProcessing(ctx)
} else {
dh.lockVlanConfig.RUnlock()
}
}
}
if dh.getCollectorIsRunning() {
// Stop collector routine
dh.stopCollector <- true
}
if dh.getAlarmManagerIsRunning(ctx) {
dh.stopAlarmManager <- true
}
//reset a possibly running upgrade FSM
// (note the Upgrade FSM may stay alive e.g. in state upgradeStWaitForCommit to endure the ONU reboot)
dh.lockUpgradeFsm.RLock()
if dh.pOnuUpradeFsm != nil {
dh.pOnuUpradeFsm.CancelProcessing(ctx)
}
dh.lockUpgradeFsm.RUnlock()
logger.Infow(ctx, "resetFsms done", log.Fields{"device-id": dh.deviceID})
return nil
}
func (dh *deviceHandler) processMibDatabaseSyncEvent(ctx context.Context, devEvent OnuDeviceEvent) {
logger.Debugw(ctx, "MibInSync event received, adding uni ports and locking the ONU interfaces", log.Fields{"device-id": dh.deviceID})
// store persistent data collected during MIB upload processing
if err := dh.storePersistentData(ctx); err != nil {
logger.Warnw(ctx, "store persistent data error - continue as there will be additional write attempts",
log.Fields{"device-id": dh.deviceID, "err": err})
}
_ = dh.deviceReasonUpdate(ctx, drDiscoveryMibsyncComplete, !dh.isReconciling())
dh.addAllUniPorts(ctx)
/* 200605: lock processing after initial MIBUpload removed now as the ONU should be in the lock state per default here */
/* 201117: build_dt-berlin-pod-openonugo_1T8GEM_voltha_DT_openonugo_master_test runs into error TC
* 'Test Disable ONUs and OLT Then Delete ONUs and OLT for DT' with Sercom ONU, which obviously needs
* disable/enable toggling here to allow traffic
* but moreover it might be useful for tracking the interface operState changes if this will be implemented,
* like the py comment says:
* # start by locking all the unis till mib sync and initial mib is downloaded
* # this way we can capture the port down/up events when we are ready
*/
// Init Uni Ports to Admin locked state
// *** should generate UniLockStateDone event *****
if dh.pLockStateFsm == nil {
dh.createUniLockFsm(ctx, true, UniLockStateDone)
} else { //LockStateFSM already init
dh.pLockStateFsm.setSuccessEvent(UniLockStateDone)
dh.runUniLockFsm(ctx, true)
}
}
func (dh *deviceHandler) processUniLockStateDoneEvent(ctx context.Context, devEvent OnuDeviceEvent) {
logger.Infow(ctx, "UniLockStateDone event: Starting MIB download", log.Fields{"device-id": dh.deviceID})
/* Mib download procedure -
***** should run over 'downloaded' state and generate MibDownloadDone event *****
*/
pDevEntry := dh.getOnuDeviceEntry(ctx, false)
if pDevEntry == nil {
logger.Errorw(ctx, "No valid OnuDevice - aborting", log.Fields{"device-id": dh.deviceID})
return
}
pMibDlFsm := pDevEntry.pMibDownloadFsm.pFsm
if pMibDlFsm != nil {
if pMibDlFsm.Is(dlStDisabled) {
if err := pMibDlFsm.Event(dlEvStart); err != nil {
logger.Errorw(ctx, "MibDownloadFsm: Can't go to state starting", log.Fields{"device-id": dh.deviceID, "err": err})
// maybe try a FSM reset and then again ... - TODO!!!
} else {
logger.Debugw(ctx, "MibDownloadFsm", log.Fields{"state": string(pMibDlFsm.Current())})
// maybe use more specific states here for the specific download steps ...
if err := pMibDlFsm.Event(dlEvCreateGal); err != nil {
logger.Errorw(ctx, "MibDownloadFsm: Can't start CreateGal", log.Fields{"device-id": dh.deviceID, "err": err})
} else {
logger.Debugw(ctx, "state of MibDownloadFsm", log.Fields{"state": string(pMibDlFsm.Current())})
//Begin MIB data download (running autonomously)
}
}
} else {
logger.Errorw(ctx, "wrong state of MibDownloadFsm - want: disabled", log.Fields{"have": string(pMibDlFsm.Current()),
"device-id": dh.deviceID})
// maybe try a FSM reset and then again ... - TODO!!!
}
/***** Mib download started */
} else {
logger.Errorw(ctx, "MibDownloadFsm invalid - cannot be executed!!", log.Fields{"device-id": dh.deviceID})
}
}
func (dh *deviceHandler) processMibDownloadDoneEvent(ctx context.Context, devEvent OnuDeviceEvent) {
logger.Debugw(ctx, "MibDownloadDone event received, unlocking the ONU interfaces", log.Fields{"device-id": dh.deviceID})
//initiate DevStateUpdate
if !dh.isReconciling() {
logger.Debugw(ctx, "call DeviceStateUpdate upon mib-download done", log.Fields{"ConnectStatus": voltha.ConnectStatus_REACHABLE,
"OperStatus": voltha.OperStatus_ACTIVE, "device-id": dh.deviceID})
//we allow a possible OnuSw image commit only in the normal startup, not at reconciling
// in case of adapter restart connected to an ONU upgrade I would not rely on the image quality
// maybe some 'forced' commitment can be done in this situation from system management (or upgrade restarted)
dh.checkOnOnuImageCommit(ctx)
if err := dh.coreProxy.DeviceStateUpdate(log.WithSpanFromContext(context.TODO(), ctx), dh.deviceID,
voltha.ConnectStatus_REACHABLE, voltha.OperStatus_ACTIVE); err != nil {
//TODO with VOL-3045/VOL-3046: return the error and stop further processing
logger.Errorw(ctx, "error-updating-device-state", log.Fields{"device-id": dh.deviceID, "error": err})
} else {
logger.Debugw(ctx, "dev state updated to 'Oper.Active'", log.Fields{"device-id": dh.deviceID})
}
} else {
logger.Debugw(ctx, "reconciling - don't notify core about DeviceStateUpdate to ACTIVE",
log.Fields{"device-id": dh.deviceID})
}
_ = dh.deviceReasonUpdate(ctx, drInitialMibDownloaded, !dh.isReconciling())
if !dh.getCollectorIsRunning() {
// Start PM collector routine
go dh.startCollector(ctx)
}
if !dh.getAlarmManagerIsRunning(ctx) {
go dh.startAlarmManager(ctx)
}
// Initialize classical L2 PM Interval Counters
if err := dh.pOnuMetricsMgr.pAdaptFsm.pFsm.Event(l2PmEventInit); err != nil {
// There is no way we should be landing here, but if we do then
// there is nothing much we can do about this other than log error
logger.Errorw(ctx, "error starting l2 pm fsm", log.Fields{"device-id": dh.device.Id, "err": err})
}
dh.setReadyForOmciConfig(true)
pDevEntry := dh.getOnuDeviceEntry(ctx, false)
if pDevEntry == nil {
logger.Errorw(ctx, "No valid OnuDevice - aborting", log.Fields{"device-id": dh.deviceID})
return
}
pDevEntry.mutexPersOnuConfig.RLock()
if dh.isReconciling() && pDevEntry.sOnuPersistentData.PersUniDisableDone {
pDevEntry.mutexPersOnuConfig.RUnlock()
logger.Debugw(ctx, "reconciling - uni-ports were disabled by admin before adapter restart - keep the ports locked",
log.Fields{"device-id": dh.deviceID})
go dh.reconcileDeviceTechProf(ctx)
// reconcilement will be continued after ani config is done
} else {
pDevEntry.mutexPersOnuConfig.RUnlock()
// *** should generate UniUnlockStateDone event *****
if dh.pUnlockStateFsm == nil {
dh.createUniLockFsm(ctx, false, UniUnlockStateDone)
} else { //UnlockStateFSM already init
dh.pUnlockStateFsm.setSuccessEvent(UniUnlockStateDone)
dh.runUniLockFsm(ctx, false)
}
}
}
func (dh *deviceHandler) processUniUnlockStateDoneEvent(ctx context.Context, devEvent OnuDeviceEvent) {
dh.enableUniPortStateUpdate(ctx) //cmp python yield self.enable_ports()
if !dh.isReconciling() {
logger.Infow(ctx, "UniUnlockStateDone event: Sending OnuUp event", log.Fields{"device-id": dh.deviceID})
raisedTs := time.Now().Unix()
go dh.sendOnuOperStateEvent(ctx, voltha.OperStatus_ACTIVE, dh.deviceID, raisedTs) //cmp python onu_active_event
pDevEntry := dh.getOnuDeviceEntry(ctx, false)
if pDevEntry == nil {
logger.Errorw(ctx, "No valid OnuDevice - aborting", log.Fields{"device-id": dh.deviceID})
return
}
pDevEntry.mutexPersOnuConfig.Lock()
pDevEntry.sOnuPersistentData.PersUniUnlockDone = true
pDevEntry.mutexPersOnuConfig.Unlock()
if err := dh.storePersistentData(ctx); err != nil {
logger.Warnw(ctx, "store persistent data error - continue for now as there will be additional write attempts",
log.Fields{"device-id": dh.deviceID, "err": err})
}
} else {
logger.Debugw(ctx, "reconciling - don't notify core that onu went to active but trigger tech profile config",
log.Fields{"device-id": dh.deviceID})
go dh.reconcileDeviceTechProf(ctx)
// reconcilement will be continued after ani config is done
}
}
func (dh *deviceHandler) processUniDisableStateDoneEvent(ctx context.Context, devEvent OnuDeviceEvent) {
logger.Debugw(ctx, "DeviceStateUpdate upon disable", log.Fields{"ConnectStatus": voltha.ConnectStatus_REACHABLE,
"OperStatus": voltha.OperStatus_UNKNOWN, "device-id": dh.deviceID})
if err := dh.coreProxy.DeviceStateUpdate(log.WithSpanFromContext(context.TODO(), ctx),
dh.deviceID, voltha.ConnectStatus_REACHABLE, voltha.OperStatus_UNKNOWN); err != nil {
//TODO with VOL-3045/VOL-3046: return the error and stop further processing
logger.Errorw(ctx, "error-updating-device-state", log.Fields{"device-id": dh.deviceID, "error": err})
}
logger.Debugw(ctx, "DeviceReasonUpdate upon disable", log.Fields{"reason": deviceReasonMap[drOmciAdminLock], "device-id": dh.deviceID})
// DeviceReason to update acc.to modified py code as per beginning of Sept 2020
_ = dh.deviceReasonUpdate(ctx, drOmciAdminLock, true)
//transfer the modified logical uni port state
dh.disableUniPortStateUpdate(ctx)
pDevEntry := dh.getOnuDeviceEntry(ctx, false)
if pDevEntry == nil {
logger.Errorw(ctx, "No valid OnuDevice - aborting", log.Fields{"device-id": dh.deviceID})
return
}
pDevEntry.mutexPersOnuConfig.Lock()
pDevEntry.sOnuPersistentData.PersUniDisableDone = true
pDevEntry.mutexPersOnuConfig.Unlock()
if err := dh.storePersistentData(ctx); err != nil {
logger.Warnw(ctx, "store persistent data error - continue for now as there will be additional write attempts",
log.Fields{"device-id": dh.deviceID, "err": err})
}
}
func (dh *deviceHandler) processUniEnableStateDoneEvent(ctx context.Context, devEvent OnuDeviceEvent) {
logger.Debugw(ctx, "DeviceStateUpdate upon re-enable", log.Fields{"ConnectStatus": voltha.ConnectStatus_REACHABLE,
"OperStatus": voltha.OperStatus_ACTIVE, "device-id": dh.deviceID})
if err := dh.coreProxy.DeviceStateUpdate(log.WithSpanFromContext(context.TODO(), ctx), dh.deviceID, voltha.ConnectStatus_REACHABLE,
voltha.OperStatus_ACTIVE); err != nil {
//TODO with VOL-3045/VOL-3046: return the error and stop further processing
logger.Errorw(ctx, "error-updating-device-state", log.Fields{"device-id": dh.deviceID, "error": err})
}
logger.Debugw(ctx, "DeviceReasonUpdate upon re-enable", log.Fields{
"reason": deviceReasonMap[drOnuReenabled], "device-id": dh.deviceID})
// DeviceReason to update acc.to modified py code as per beginning of Sept 2020
_ = dh.deviceReasonUpdate(ctx, drOnuReenabled, true)
//transfer the modified logical uni port state
dh.enableUniPortStateUpdate(ctx)
pDevEntry := dh.getOnuDeviceEntry(ctx, false)
if pDevEntry == nil {
logger.Errorw(ctx, "No valid OnuDevice - aborting", log.Fields{"device-id": dh.deviceID})
return
}
pDevEntry.mutexPersOnuConfig.Lock()
pDevEntry.sOnuPersistentData.PersUniDisableDone = false
pDevEntry.mutexPersOnuConfig.Unlock()
if err := dh.storePersistentData(ctx); err != nil {
logger.Warnw(ctx, "store persistent data error - continue for now as there will be additional write attempts",
log.Fields{"device-id": dh.deviceID, "err": err})
}
}
func (dh *deviceHandler) processOmciAniConfigDoneEvent(ctx context.Context, devEvent OnuDeviceEvent) {
if devEvent == OmciAniConfigDone {
logger.Debugw(ctx, "OmciAniConfigDone event received", log.Fields{"device-id": dh.deviceID})
// attention: the device reason update is done based on ONU-UNI-Port related activity
// - which may cause some inconsistency
if dh.getDeviceReason() != drTechProfileConfigDownloadSuccess {
// which may be the case from some previous actvity even on this UNI Port (but also other UNI ports)
_ = dh.deviceReasonUpdate(ctx, drTechProfileConfigDownloadSuccess, !dh.isReconciling())
}
if dh.isReconciling() {
go dh.reconcileDeviceFlowConfig(ctx)
}
} else { // should be the OmciAniResourceRemoved block
logger.Debugw(ctx, "OmciAniResourceRemoved event received", log.Fields{"device-id": dh.deviceID})
// attention: the device reason update is done based on ONU-UNI-Port related activity
// - which may cause some inconsistency
if dh.getDeviceReason() != drTechProfileConfigDeleteSuccess {
// which may be the case from some previous actvity even on this ONU port (but also other UNI ports)
_ = dh.deviceReasonUpdate(ctx, drTechProfileConfigDeleteSuccess, true)
}
}
}
func (dh *deviceHandler) processOmciVlanFilterDoneEvent(ctx context.Context, aDevEvent OnuDeviceEvent) {
logger.Debugw(ctx, "OmciVlanFilterDone event received",
log.Fields{"device-id": dh.deviceID, "event": aDevEvent})
// attention: the device reason update is done based on ONU-UNI-Port related activity
// - which may cause some inconsistency
if aDevEvent == OmciVlanFilterAddDone || aDevEvent == OmciVlanFilterAddDoneNoKvStore {
if dh.getDeviceReason() != drOmciFlowsPushed {
// which may be the case from some previous actvity on another UNI Port of the ONU
// or even some previous flow add activity on the same port
_ = dh.deviceReasonUpdate(ctx, drOmciFlowsPushed, !dh.isReconciling())
if dh.isReconciling() {
go dh.reconcileEnd(ctx)
}
}
} else {
if dh.getDeviceReason() != drOmciFlowsDeleted {
//not relevant for reconcile
_ = dh.deviceReasonUpdate(ctx, drOmciFlowsDeleted, true)
}
}
if aDevEvent == OmciVlanFilterAddDone || aDevEvent == OmciVlanFilterRemDone {
//events that request KvStore write
if err := dh.storePersistentData(ctx); err != nil {
logger.Warnw(ctx, "store persistent data error - continue for now as there will be additional write attempts",
log.Fields{"device-id": dh.deviceID, "err": err})
}
} else {
logger.Debugw(ctx, "OmciVlanFilter*Done* - write to KvStore not requested",
log.Fields{"device-id": dh.deviceID})
}
}
//deviceProcStatusUpdate evaluates possible processing events and initiates according next activities
func (dh *deviceHandler) deviceProcStatusUpdate(ctx context.Context, devEvent OnuDeviceEvent) {
switch devEvent {
case MibDatabaseSync:
{
dh.processMibDatabaseSyncEvent(ctx, devEvent)
}
case UniLockStateDone:
{
dh.processUniLockStateDoneEvent(ctx, devEvent)
}
case MibDownloadDone:
{
dh.processMibDownloadDoneEvent(ctx, devEvent)
}
case UniUnlockStateDone:
{
dh.processUniUnlockStateDoneEvent(ctx, devEvent)
}
case UniEnableStateDone:
{
dh.processUniEnableStateDoneEvent(ctx, devEvent)
}
case UniDisableStateDone:
{
dh.processUniDisableStateDoneEvent(ctx, devEvent)
}
case OmciAniConfigDone, OmciAniResourceRemoved:
{
dh.processOmciAniConfigDoneEvent(ctx, devEvent)
}
case OmciVlanFilterAddDone, OmciVlanFilterAddDoneNoKvStore, OmciVlanFilterRemDone, OmciVlanFilterRemDoneNoKvStore:
{
dh.processOmciVlanFilterDoneEvent(ctx, devEvent)
}
case OmciOnuSwUpgradeDone:
{
dh.upgradeSuccess = true
}
default:
{
logger.Debugw(ctx, "unhandled-device-event", log.Fields{"device-id": dh.deviceID, "event": devEvent})
}
} //switch
}
func (dh *deviceHandler) addUniPort(ctx context.Context, aUniInstNo uint16, aUniID uint8, aPortType uniPortType) {
// parameters are IntfId, OnuId, uniId
uniNo := mkUniPortNum(ctx, dh.pOnuIndication.GetIntfId(), dh.pOnuIndication.GetOnuId(),
uint32(aUniID))
if _, present := dh.uniEntityMap[uniNo]; present {
logger.Warnw(ctx, "onuUniPort-add: Port already exists", log.Fields{"for InstanceId": aUniInstNo})
} else {
//with arguments aUniID, a_portNo, aPortType
pUniPort := newOnuUniPort(ctx, aUniID, uniNo, aUniInstNo, aPortType)
if pUniPort == nil {
logger.Warnw(ctx, "onuUniPort-add: Could not create Port", log.Fields{"for InstanceId": aUniInstNo})
} else {
//store UniPort with the System-PortNumber key
dh.uniEntityMap[uniNo] = pUniPort
if !dh.isReconciling() {
// create announce the UniPort to the core as VOLTHA Port object
if err := pUniPort.createVolthaPort(ctx, dh); err == nil {
logger.Infow(ctx, "onuUniPort-added", log.Fields{"for PortNo": uniNo})
} //error logging already within UniPort method
} else {
logger.Debugw(ctx, "reconciling - onuUniPort already added", log.Fields{"for PortNo": uniNo, "device-id": dh.deviceID})
}
}
}
}
func (dh *deviceHandler) addAllUniPorts(ctx context.Context) {
pDevEntry := dh.getOnuDeviceEntry(ctx, false)
if pDevEntry == nil {
logger.Errorw(ctx, "No valid OnuDevice - aborting", log.Fields{"device-id": dh.deviceID})
return
}
i := uint8(0) //UNI Port limit: see MaxUnisPerOnu (by now 16) (OMCI supports max 255 p.b.)
if pptpInstKeys := pDevEntry.pOnuDB.getSortedInstKeys(
ctx, me.PhysicalPathTerminationPointEthernetUniClassID); len(pptpInstKeys) > 0 {
for _, mgmtEntityID := range pptpInstKeys {
logger.Debugw(ctx, "Add PPTPEthUni port for MIB-stored instance:", log.Fields{
"device-id": dh.deviceID, "PPTPEthUni EntityID": mgmtEntityID})
dh.addUniPort(ctx, mgmtEntityID, i, uniPPTP)
i++
}
} else {
logger.Debugw(ctx, "No PPTP instances found", log.Fields{"device-id": dh.deviceID})
}
if veipInstKeys := pDevEntry.pOnuDB.getSortedInstKeys(
ctx, me.VirtualEthernetInterfacePointClassID); len(veipInstKeys) > 0 {
for _, mgmtEntityID := range veipInstKeys {
logger.Debugw(ctx, "Add VEIP for MIB-stored instance:", log.Fields{
"device-id": dh.deviceID, "VEIP EntityID": mgmtEntityID})
dh.addUniPort(ctx, mgmtEntityID, i, uniVEIP)
i++
}
} else {
logger.Debugw(ctx, "No VEIP instances found", log.Fields{"device-id": dh.deviceID})
}
if i == 0 {
logger.Warnw(ctx, "No UniG instances found", log.Fields{"device-id": dh.deviceID})
}
}
// enableUniPortStateUpdate enables UniPortState and update core port state accordingly
func (dh *deviceHandler) enableUniPortStateUpdate(ctx context.Context) {
// py code was updated 2003xx to activate the real ONU UNI ports per OMCI (VEIP or PPTP)
// but towards core only the first port active state is signaled
// with following remark:
// # TODO: for now only support the first UNI given no requirement for multiple uni yet. Also needed to reduce flow
// # load on the core
// lock_ports(false) as done in py code here is shifted to separate call from device event processing
for uniNo, uniPort := range dh.uniEntityMap {
// only if this port is validated for operState transfer
if (1<<uniPort.uniID)&dh.pOpenOnuAc.config.UniPortMask == (1 << uniPort.uniID) {
logger.Infow(ctx, "onuUniPort-forced-OperState-ACTIVE", log.Fields{"for PortNo": uniNo, "device-id": dh.deviceID})
uniPort.setOperState(vc.OperStatus_ACTIVE)
if !dh.isReconciling() {
//maybe also use getter functions on uniPort - perhaps later ...
go dh.coreProxy.PortStateUpdate(log.WithSpanFromContext(context.TODO(), ctx), dh.deviceID, voltha.Port_ETHERNET_UNI, uniPort.portNo, uniPort.operState)
} else {
logger.Debugw(ctx, "reconciling - don't notify core about PortStateUpdate", log.Fields{"device-id": dh.deviceID})
}
}
}
}
// Disable UniPortState and update core port state accordingly
func (dh *deviceHandler) disableUniPortStateUpdate(ctx context.Context) {
// compare enableUniPortStateUpdate() above
// -> use current restriction to operate only on first UNI port as inherited from actual Py code
for uniNo, uniPort := range dh.uniEntityMap {
// only if this port is validated for operState transfer
if (1<<uniPort.uniID)&dh.pOpenOnuAc.config.UniPortMask == (1 << uniPort.uniID) {
logger.Infow(ctx, "onuUniPort-forced-OperState-UNKNOWN", log.Fields{"for PortNo": uniNo, "device-id": dh.deviceID})
uniPort.setOperState(vc.OperStatus_UNKNOWN)
if !dh.isReconciling() {
//maybe also use getter functions on uniPort - perhaps later ...
go dh.coreProxy.PortStateUpdate(log.WithSpanFromContext(context.TODO(), ctx), dh.deviceID, voltha.Port_ETHERNET_UNI, uniPort.portNo, uniPort.operState)
} else {
logger.Debugw(ctx, "reconciling - don't notify core about PortStateUpdate", log.Fields{"device-id": dh.deviceID})
}
}
}
}
// ONU_Active/Inactive announcement on system KAFKA bus
// tried to re-use procedure of oltUpDownIndication from openolt_eventmgr.go with used values from Py code
func (dh *deviceHandler) sendOnuOperStateEvent(ctx context.Context, aOperState vc.OperStatus_Types, aDeviceID string, raisedTs int64) {
var de voltha.DeviceEvent
eventContext := make(map[string]string)
//Populating event context
// assume giving ParentId in GetDevice twice really gives the ParentDevice (there is no GetParentDevice()...)
parentDevice, err := dh.coreProxy.GetDevice(log.WithSpanFromContext(context.TODO(), ctx), dh.parentID, dh.parentID)
if err != nil || parentDevice == nil {
logger.Errorw(ctx, "Failed to fetch parent device for OnuEvent",
log.Fields{"parentID": dh.parentID, "err": err})
return //TODO with VOL-3045: rw-core is unresponsive: report error and/or perform self-initiated onu-reset?
}
oltSerialNumber := parentDevice.SerialNumber
eventContext["pon-id"] = strconv.FormatUint(uint64(dh.pOnuIndication.IntfId), 10)
eventContext["onu-id"] = strconv.FormatUint(uint64(dh.pOnuIndication.OnuId), 10)
eventContext["serial-number"] = dh.device.SerialNumber
eventContext["olt-serial-number"] = oltSerialNumber
eventContext["device-id"] = aDeviceID
eventContext["registration-id"] = aDeviceID //py: string(device_id)??
eventContext["num-of-unis"] = strconv.Itoa(len(dh.uniEntityMap))
if deviceEntry := dh.getOnuDeviceEntry(ctx, false); deviceEntry != nil {
deviceEntry.mutexPersOnuConfig.RLock()
eventContext["equipment-id"] = deviceEntry.sOnuPersistentData.PersEquipmentID
deviceEntry.mutexPersOnuConfig.RUnlock()
eventContext["software-version"] = deviceEntry.getActiveImageVersion(ctx)
deviceEntry.mutexPersOnuConfig.RLock()
eventContext["vendor"] = deviceEntry.sOnuPersistentData.PersVendorID
deviceEntry.mutexPersOnuConfig.RUnlock()
eventContext["inactive-software-version"] = deviceEntry.getInactiveImageVersion(ctx)
logger.Debugw(ctx, "prepare ONU_ACTIVATED event",
log.Fields{"device-id": aDeviceID, "EventContext": eventContext})
} else {
logger.Errorw(ctx, "Failed to fetch device-entry. ONU_ACTIVATED event is not sent",
log.Fields{"device-id": aDeviceID})
return
}
/* Populating device event body */
de.Context = eventContext
de.ResourceId = aDeviceID
if aOperState == voltha.OperStatus_ACTIVE {
de.DeviceEventName = fmt.Sprintf("%s_%s", cOnuActivatedEvent, "RAISE_EVENT")
de.Description = fmt.Sprintf("%s Event - %s - %s",
cEventObjectType, cOnuActivatedEvent, "Raised")
} else {
de.DeviceEventName = fmt.Sprintf("%s_%s", cOnuActivatedEvent, "CLEAR_EVENT")
de.Description = fmt.Sprintf("%s Event - %s - %s",
cEventObjectType, cOnuActivatedEvent, "Cleared")
}
/* Send event to KAFKA */
if err := dh.EventProxy.SendDeviceEvent(ctx, &de, equipment, pon, raisedTs); err != nil {
logger.Warnw(ctx, "could not send ONU_ACTIVATED event",
log.Fields{"device-id": aDeviceID, "error": err})
}
logger.Debugw(ctx, "ctx, ONU_ACTIVATED event sent to KAFKA",
log.Fields{"device-id": aDeviceID, "with-EventName": de.DeviceEventName})
}
// createUniLockFsm initializes and runs the UniLock FSM to transfer the OMCI related commands for port lock/unlock
func (dh *deviceHandler) createUniLockFsm(ctx context.Context, aAdminState bool, devEvent OnuDeviceEvent) {
chLSFsm := make(chan Message, 2048)
var sFsmName string
if aAdminState {
logger.Debugw(ctx, "createLockStateFSM", log.Fields{"device-id": dh.deviceID})
sFsmName = "LockStateFSM"
} else {
logger.Debugw(ctx, "createUnlockStateFSM", log.Fields{"device-id": dh.deviceID})
sFsmName = "UnLockStateFSM"
}
pDevEntry := dh.getOnuDeviceEntry(ctx, true)
if pDevEntry == nil {
logger.Errorw(ctx, "No valid OnuDevice -aborting", log.Fields{"device-id": dh.deviceID})
return
}
pLSFsm := newLockStateFsm(ctx, pDevEntry.PDevOmciCC, aAdminState, devEvent,
sFsmName, dh, chLSFsm)
if pLSFsm != nil {
if aAdminState {
dh.pLockStateFsm = pLSFsm
} else {
dh.pUnlockStateFsm = pLSFsm
}
dh.runUniLockFsm(ctx, aAdminState)
} else {
logger.Errorw(ctx, "LockStateFSM could not be created - abort!!", log.Fields{"device-id": dh.deviceID})
}
}
// runUniLockFsm starts the UniLock FSM to transfer the OMCI related commands for port lock/unlock
func (dh *deviceHandler) runUniLockFsm(ctx context.Context, aAdminState bool) {
/* Uni Port lock/unlock procedure -
***** should run via 'adminDone' state and generate the argument requested event *****
*/
var pLSStatemachine *fsm.FSM
if aAdminState {
pLSStatemachine = dh.pLockStateFsm.pAdaptFsm.pFsm
//make sure the opposite FSM is not running and if so, terminate it as not relevant anymore
if (dh.pUnlockStateFsm != nil) &&
(dh.pUnlockStateFsm.pAdaptFsm.pFsm.Current() != uniStDisabled) {
_ = dh.pUnlockStateFsm.pAdaptFsm.pFsm.Event(uniEvReset)
}
} else {
pLSStatemachine = dh.pUnlockStateFsm.pAdaptFsm.pFsm
//make sure the opposite FSM is not running and if so, terminate it as not relevant anymore
if (dh.pLockStateFsm != nil) &&
(dh.pLockStateFsm.pAdaptFsm.pFsm.Current() != uniStDisabled) {
_ = dh.pLockStateFsm.pAdaptFsm.pFsm.Event(uniEvReset)
}
}
if pLSStatemachine != nil {
if pLSStatemachine.Is(uniStDisabled) {
if err := pLSStatemachine.Event(uniEvStart); err != nil {
logger.Warnw(ctx, "LockStateFSM: can't start", log.Fields{"err": err})
// maybe try a FSM reset and then again ... - TODO!!!
} else {
/***** LockStateFSM started */
logger.Debugw(ctx, "LockStateFSM started", log.Fields{
"state": pLSStatemachine.Current(), "device-id": dh.deviceID})
}
} else {
logger.Warnw(ctx, "wrong state of LockStateFSM - want: disabled", log.Fields{
"have": pLSStatemachine.Current(), "device-id": dh.deviceID})
// maybe try a FSM reset and then again ... - TODO!!!
}
} else {
logger.Errorw(ctx, "LockStateFSM StateMachine invalid - cannot be executed!!", log.Fields{"device-id": dh.deviceID})
// maybe try a FSM reset and then again ... - TODO!!!
}
}
// createOnuUpgradeFsm initializes and runs the Onu Software upgrade FSM
func (dh *deviceHandler) createOnuUpgradeFsm(ctx context.Context, apDevEntry *OnuDeviceEntry, aDevEvent OnuDeviceEvent) error {
//in here lockUpgradeFsm is already locked
chUpgradeFsm := make(chan Message, 2048)
var sFsmName = "OnuSwUpgradeFSM"
logger.Debugw(ctx, "create OnuSwUpgradeFSM", log.Fields{"device-id": dh.deviceID})
if apDevEntry.PDevOmciCC == nil {
logger.Errorw(ctx, "no valid OnuDevice or omciCC - abort", log.Fields{"device-id": dh.deviceID})
return fmt.Errorf(fmt.Sprintf("no valid omciCC - abort for device-id: %s", dh.device.Id))
}
dh.pOnuUpradeFsm = NewOnuUpgradeFsm(ctx, dh, apDevEntry, apDevEntry.pOnuDB, aDevEvent,
sFsmName, chUpgradeFsm)
if dh.pOnuUpradeFsm != nil {
pUpgradeStatemachine := dh.pOnuUpradeFsm.pAdaptFsm.pFsm
if pUpgradeStatemachine != nil {
if pUpgradeStatemachine.Is(upgradeStDisabled) {
dh.upgradeSuccess = false //for start of upgrade processing reset the last indication
if err := pUpgradeStatemachine.Event(upgradeEvStart); err != nil {
logger.Errorw(ctx, "OnuSwUpgradeFSM: can't start", log.Fields{"err": err})
// maybe try a FSM reset and then again ... - TODO!!!
return fmt.Errorf(fmt.Sprintf("OnuSwUpgradeFSM could not be started for device-id: %s", dh.device.Id))
}
/***** LockStateFSM started */
logger.Debugw(ctx, "OnuSwUpgradeFSM started", log.Fields{
"state": pUpgradeStatemachine.Current(), "device-id": dh.deviceID})
} else {
logger.Errorw(ctx, "wrong state of OnuSwUpgradeFSM to start - want: disabled", log.Fields{
"have": pUpgradeStatemachine.Current(), "device-id": dh.deviceID})
// maybe try a FSM reset and then again ... - TODO!!!
return fmt.Errorf(fmt.Sprintf("OnuSwUpgradeFSM could not be started for device-id: %s, wrong internal state", dh.device.Id))
}
} else {
logger.Errorw(ctx, "OnuSwUpgradeFSM internal FSM invalid - cannot be executed!!", log.Fields{"device-id": dh.deviceID})
// maybe try a FSM reset and then again ... - TODO!!!
return fmt.Errorf(fmt.Sprintf("OnuSwUpgradeFSM internal FSM could not be created for device-id: %s", dh.device.Id))
}
} else {
logger.Errorw(ctx, "OnuSwUpgradeFSM could not be created - abort", log.Fields{"device-id": dh.deviceID})
return fmt.Errorf(fmt.Sprintf("OnuSwUpgradeFSM could not be created - abort for device-id: %s", dh.device.Id))
}
return nil
}
// removeOnuUpgradeFsm clears the Onu Software upgrade FSM
func (dh *deviceHandler) removeOnuUpgradeFsm(ctx context.Context) {
logger.Debugw(ctx, "remove OnuSwUpgradeFSM StateMachine", log.Fields{
"device-id": dh.deviceID})
dh.lockUpgradeFsm.Lock()
defer dh.lockUpgradeFsm.Unlock()
dh.pOnuUpradeFsm = nil //resource clearing is left to garbage collector
}
// checkOnOnuImageCommit verifies if the ONU is in some upgrade state that allows for image commit and if tries to commit
func (dh *deviceHandler) checkOnOnuImageCommit(ctx context.Context) {
pDevEntry := dh.getOnuDeviceEntry(ctx, false)
if pDevEntry == nil {
logger.Errorw(ctx, "No valid OnuDevice -aborting checkOnOnuImageCommit", log.Fields{"device-id": dh.deviceID})
return
}
dh.lockUpgradeFsm.RLock()
defer dh.lockUpgradeFsm.RUnlock()
if dh.pOnuUpradeFsm != nil {
pUpgradeStatemachine := dh.pOnuUpradeFsm.pAdaptFsm.pFsm
if pUpgradeStatemachine != nil {
// commit is only processed in case out upgrade FSM indicates the according state (for automatic commit)
// (some manual forced commit could do without)
if pUpgradeStatemachine.Is(upgradeStWaitForCommit) {
// here no need to update the upgrade image state to activated as the state will be immediately be set to committing
if pDevEntry.IsImageToBeCommitted(ctx, dh.pOnuUpradeFsm.inactiveImageMeID) {
if err := pUpgradeStatemachine.Event(upgradeEvCommitSw); err != nil {
logger.Errorw(ctx, "OnuSwUpgradeFSM: can't call commit event", log.Fields{"err": err})
return
}
logger.Debugw(ctx, "OnuSwUpgradeFSM commit image requested", log.Fields{
"state": pUpgradeStatemachine.Current(), "device-id": dh.deviceID})
} else {
logger.Errorw(ctx, "OnuSwUpgradeFSM waiting to commit, but nothing to commit on ONU - abort upgrade",
log.Fields{"device-id": dh.deviceID})
_ = pUpgradeStatemachine.Event(upgradeEvAbort)
return
}
} else {
//upgrade FSM is active but not waiting for commit: maybe because commit flag is not set
// upgrade FSM is to be informed if the current active image is the one that was used in upgrade for the download
if activeImageID, err := pDevEntry.GetActiveImageMeID(ctx); err == nil {
if dh.pOnuUpradeFsm.inactiveImageMeID == activeImageID {
logger.Debugw(ctx, "OnuSwUpgradeFSM image state set to activated", log.Fields{
"state": pUpgradeStatemachine.Current(), "device-id": dh.deviceID})
dh.pOnuUpradeFsm.SetImageState(ctx, voltha.ImageState_IMAGE_ACTIVE)
}
}
}
}
} else {
logger.Debugw(ctx, "no ONU image to be committed", log.Fields{"device-id": dh.deviceID})
}
}
//setBackend provides a DB backend for the specified path on the existing KV client
func (dh *deviceHandler) setBackend(ctx context.Context, aBasePathKvStore string) *db.Backend {
logger.Debugw(ctx, "SetKVStoreBackend", log.Fields{"IpTarget": dh.pOpenOnuAc.KVStoreAddress,
"BasePathKvStore": aBasePathKvStore, "device-id": dh.deviceID})
kvbackend := &db.Backend{
Client: dh.pOpenOnuAc.kvClient,
StoreType: dh.pOpenOnuAc.KVStoreType,
/* address config update acc. to [VOL-2736] */
Address: dh.pOpenOnuAc.KVStoreAddress,
Timeout: dh.pOpenOnuAc.KVStoreTimeout,
PathPrefix: aBasePathKvStore}
return kvbackend
}
func (dh *deviceHandler) getFlowOfbFields(ctx context.Context, apFlowItem *ofp.OfpFlowStats, loMatchVlan *uint16,
loAddPcp *uint8, loIPProto *uint32) {
for _, field := range flow.GetOfbFields(apFlowItem) {
switch field.Type {
case of.OxmOfbFieldTypes_OFPXMT_OFB_ETH_TYPE:
{
logger.Debugw(ctx, "flow type EthType", log.Fields{"device-id": dh.deviceID,
"EthType": strconv.FormatInt(int64(field.GetEthType()), 16)})
}
/* TT related temporary workaround - should not be needed anymore
case of.OxmOfbFieldTypes_OFPXMT_OFB_IP_PROTO:
{
*loIPProto = field.GetIpProto()
logger.Debugw("flow type IpProto", log.Fields{"device-id": dh.deviceID,
"IpProto": strconv.FormatInt(int64(*loIPProto), 16)})
if *loIPProto == 2 {
// some workaround for TT workflow at proto == 2 (IGMP trap) -> ignore the flow
// avoids installing invalid EVTOCD rule
logger.Debugw("flow type IpProto 2: TT workaround: ignore flow",
log.Fields{"device-id": dh.deviceID})
return
}
}
*/
case of.OxmOfbFieldTypes_OFPXMT_OFB_VLAN_VID:
{
*loMatchVlan = uint16(field.GetVlanVid())
loMatchVlanMask := uint16(field.GetVlanVidMask())
if !(*loMatchVlan == uint16(of.OfpVlanId_OFPVID_PRESENT) &&
loMatchVlanMask == uint16(of.OfpVlanId_OFPVID_PRESENT)) {
*loMatchVlan = *loMatchVlan & 0xFFF // not transparent: copy only ID bits
}
logger.Debugw(ctx, "flow field type", log.Fields{"device-id": dh.deviceID,
"VID": strconv.FormatInt(int64(*loMatchVlan), 16)})
}
case of.OxmOfbFieldTypes_OFPXMT_OFB_VLAN_PCP:
{
*loAddPcp = uint8(field.GetVlanPcp())
logger.Debugw(ctx, "flow field type", log.Fields{"device-id": dh.deviceID,
"PCP": loAddPcp})
}
case of.OxmOfbFieldTypes_OFPXMT_OFB_UDP_DST:
{
logger.Debugw(ctx, "flow field type", log.Fields{"device-id": dh.deviceID,
"UDP-DST": strconv.FormatInt(int64(field.GetUdpDst()), 16)})
}
case of.OxmOfbFieldTypes_OFPXMT_OFB_UDP_SRC:
{
logger.Debugw(ctx, "flow field type", log.Fields{"device-id": dh.deviceID,
"UDP-SRC": strconv.FormatInt(int64(field.GetUdpSrc()), 16)})
}
case of.OxmOfbFieldTypes_OFPXMT_OFB_IPV4_DST:
{
logger.Debugw(ctx, "flow field type", log.Fields{"device-id": dh.deviceID,
"IPv4-DST": field.GetIpv4Dst()})
}
case of.OxmOfbFieldTypes_OFPXMT_OFB_IPV4_SRC:
{
logger.Debugw(ctx, "flow field type", log.Fields{"device-id": dh.deviceID,
"IPv4-SRC": field.GetIpv4Src()})
}
case of.OxmOfbFieldTypes_OFPXMT_OFB_METADATA:
{
logger.Debugw(ctx, "flow field type", log.Fields{"device-id": dh.deviceID,
"Metadata": field.GetTableMetadata()})
}
/*
default:
{
//all other entires ignored
}
*/
}
} //for all OfbFields
}
func (dh *deviceHandler) getFlowActions(ctx context.Context, apFlowItem *ofp.OfpFlowStats, loSetPcp *uint8, loSetVlan *uint16) {
for _, action := range flow.GetActions(apFlowItem) {
switch action.Type {
/* not used:
case of.OfpActionType_OFPAT_OUTPUT:
{
logger.Debugw("flow action type", log.Fields{"device-id": dh.deviceID,
"Output": action.GetOutput()})
}
*/
case of.OfpActionType_OFPAT_PUSH_VLAN:
{
logger.Debugw(ctx, "flow action type", log.Fields{"device-id": dh.deviceID,
"PushEthType": strconv.FormatInt(int64(action.GetPush().Ethertype), 16)})
}
case of.OfpActionType_OFPAT_SET_FIELD:
{
pActionSetField := action.GetSetField()
if pActionSetField.Field.OxmClass != of.OfpOxmClass_OFPXMC_OPENFLOW_BASIC {
logger.Warnw(ctx, "flow action SetField invalid OxmClass (ignored)", log.Fields{"device-id": dh.deviceID,
"OxcmClass": pActionSetField.Field.OxmClass})
}
if pActionSetField.Field.GetOfbField().Type == of.OxmOfbFieldTypes_OFPXMT_OFB_VLAN_VID {
*loSetVlan = uint16(pActionSetField.Field.GetOfbField().GetVlanVid())
logger.Debugw(ctx, "flow Set VLAN from SetField action", log.Fields{"device-id": dh.deviceID,
"SetVlan": strconv.FormatInt(int64(*loSetVlan), 16)})
} else if pActionSetField.Field.GetOfbField().Type == of.OxmOfbFieldTypes_OFPXMT_OFB_VLAN_PCP {
*loSetPcp = uint8(pActionSetField.Field.GetOfbField().GetVlanPcp())
logger.Debugw(ctx, "flow Set PCP from SetField action", log.Fields{"device-id": dh.deviceID,
"SetPcp": *loSetPcp})
} else {
logger.Warnw(ctx, "flow action SetField invalid FieldType", log.Fields{"device-id": dh.deviceID,
"Type": pActionSetField.Field.GetOfbField().Type})
}
}
/*
default:
{
//all other entires ignored
}
*/
}
} //for all Actions
}
//addFlowItemToUniPort parses the actual flow item to add it to the UniPort
func (dh *deviceHandler) addFlowItemToUniPort(ctx context.Context, apFlowItem *ofp.OfpFlowStats, apUniPort *onuUniPort) error {
var loSetVlan uint16 = uint16(of.OfpVlanId_OFPVID_NONE) //noValidEntry
var loMatchVlan uint16 = uint16(of.OfpVlanId_OFPVID_PRESENT) //reserved VLANID entry
var loAddPcp, loSetPcp uint8
var loIPProto uint32
/* the TechProfileId is part of the flow Metadata - compare also comment within
* OLT-Adapter:openolt_flowmgr.go
* Metadata 8 bytes:
* Most Significant 2 Bytes = Inner VLAN
* Next 2 Bytes = Tech Profile ID(TPID)
* Least Significant 4 Bytes = Port ID
* Flow Metadata carries Tech-Profile (TP) ID and is mandatory in all
* subscriber related flows.
*/
metadata := flow.GetMetadataFromWriteMetadataAction(ctx, apFlowItem)
if metadata == 0 {
logger.Debugw(ctx, "flow-add invalid metadata - abort",
log.Fields{"device-id": dh.deviceID})
return fmt.Errorf("flow-add invalid metadata: %s", dh.deviceID)
}
loTpID := uint8(flow.GetTechProfileIDFromWriteMetaData(ctx, metadata))
loCookie := apFlowItem.GetCookie()
loCookieSlice := []uint64{loCookie}
logger.Debugw(ctx, "flow-add base indications", log.Fields{"device-id": dh.deviceID,
"TechProf-Id": loTpID, "cookie": loCookie})
dh.getFlowOfbFields(ctx, apFlowItem, &loMatchVlan, &loAddPcp, &loIPProto)
/* TT related temporary workaround - should not be needed anymore
if loIPProto == 2 {
// some workaround for TT workflow at proto == 2 (IGMP trap) -> ignore the flow
// avoids installing invalid EVTOCD rule
logger.Debugw("flow-add type IpProto 2: TT workaround: ignore flow",
log.Fields{"device-id": dh.deviceID})
return nil
}
*/
dh.getFlowActions(ctx, apFlowItem, &loSetPcp, &loSetVlan)
if loSetVlan == uint16(of.OfpVlanId_OFPVID_NONE) && loMatchVlan != uint16(of.OfpVlanId_OFPVID_PRESENT) {
logger.Errorw(ctx, "flow-add aborted - SetVlanId undefined, but MatchVid set", log.Fields{
"device-id": dh.deviceID, "UniPort": apUniPort.portNo,
"set_vid": strconv.FormatInt(int64(loSetVlan), 16),
"match_vid": strconv.FormatInt(int64(loMatchVlan), 16)})
//TODO!!: Use DeviceId within the error response to rwCore
// likewise also in other error response cases to calling components as requested in [VOL-3458]
return fmt.Errorf("flow-add Set/Match VlanId inconsistent: %s", dh.deviceID)
}
if loSetVlan == uint16(of.OfpVlanId_OFPVID_NONE) && loMatchVlan == uint16(of.OfpVlanId_OFPVID_PRESENT) {
logger.Debugw(ctx, "flow-add vlan-any/copy", log.Fields{"device-id": dh.deviceID})
loSetVlan = loMatchVlan //both 'transparent' (copy any)
} else {
//looks like OMCI value 4097 (copyFromOuter - for Uni double tagged) is not supported here
if loSetVlan != uint16(of.OfpVlanId_OFPVID_PRESENT) {
// not set to transparent
loSetVlan &= 0x0FFF //mask VID bits as prerequisite for vlanConfigFsm
}
logger.Debugw(ctx, "flow-add vlan-set", log.Fields{"device-id": dh.deviceID})
}
//mutex protection as the update_flow rpc maybe running concurrently for different flows, perhaps also activities
dh.lockVlanConfig.RLock()
logger.Debugw(ctx, "flow-add got lock", log.Fields{"device-id": dh.deviceID})
if _, exist := dh.UniVlanConfigFsmMap[apUniPort.uniID]; exist {
err := dh.UniVlanConfigFsmMap[apUniPort.uniID].SetUniFlowParams(ctx, loTpID, loCookieSlice,
loMatchVlan, loSetVlan, loSetPcp, false)
dh.lockVlanConfig.RUnlock()
return err
}
dh.lockVlanConfig.RUnlock()
return dh.createVlanFilterFsm(ctx, apUniPort, loTpID, loCookieSlice,
loMatchVlan, loSetVlan, loSetPcp, OmciVlanFilterAddDone, false)
}
//removeFlowItemFromUniPort parses the actual flow item to remove it from the UniPort
func (dh *deviceHandler) removeFlowItemFromUniPort(ctx context.Context, apFlowItem *ofp.OfpFlowStats, apUniPort *onuUniPort) error {
//optimization and assumption: the flow cookie uniquely identifies the flow and with that the internal rule
//hence only the cookie is used here to find the relevant flow and possibly remove the rule
//no extra check is done on the rule parameters
//accordingly the removal is done only once - for the first found flow with that cookie, even though
// at flow creation is not assured, that the same cookie is not configured for different flows - just assumed
//additionally it is assumed here, that removal can only be done for one cookie per flow in a sequence (different
// from addFlow - where at reconcilement multiple cookies per flow ) can be configured in one sequence)
// - some possible 'delete-all' sequence would have to be implemented separately (where the cookies are don't care anyway)
loCookie := apFlowItem.GetCookie()
logger.Debugw(ctx, "flow-remove base indications", log.Fields{"device-id": dh.deviceID, "cookie": loCookie})
/* TT related temporary workaround - should not be needed anymore
for _, field := range flow.GetOfbFields(apFlowItem) {
if field.Type == of.OxmOfbFieldTypes_OFPXMT_OFB_IP_PROTO {
loIPProto := field.GetIpProto()
logger.Debugw(ctx, "flow type IpProto", log.Fields{"device-id": dh.deviceID,
"IpProto": strconv.FormatInt(int64(loIPProto), 16)})
if loIPProto == 2 {
// some workaround for TT workflow on proto == 2 (IGMP trap) -> the flow was not added, no need to remove
logger.Debugw(ctx, "flow-remove type IpProto 2: TT workaround: ignore flow",
log.Fields{"device-id": dh.deviceID})
return nil
}
}
} //for all OfbFields
*/
//mutex protection as the update_flow rpc maybe running concurrently for different flows, perhaps also activities
dh.lockVlanConfig.RLock()
defer dh.lockVlanConfig.RUnlock()
if _, exist := dh.UniVlanConfigFsmMap[apUniPort.uniID]; exist {
return dh.UniVlanConfigFsmMap[apUniPort.uniID].RemoveUniFlowParams(ctx, loCookie)
}
logger.Debugw(ctx, "flow-remove called, but no flow is configured (no VlanConfigFsm, flow already removed) ",
log.Fields{"device-id": dh.deviceID})
//but as we regard the flow as not existing = removed we respond just ok
// and treat the reason accordingly (which in the normal removal procedure is initiated by the FSM)
go dh.deviceProcStatusUpdate(ctx, OmciVlanFilterRemDone)
return nil
}
// createVlanFilterFsm initializes and runs the VlanFilter FSM to transfer OMCI related VLAN config
// if this function is called from possibly concurrent processes it must be mutex-protected from the caller!
func (dh *deviceHandler) createVlanFilterFsm(ctx context.Context, apUniPort *onuUniPort, aTpID uint8, aCookieSlice []uint64,
aMatchVlan uint16, aSetVlan uint16, aSetPcp uint8, aDevEvent OnuDeviceEvent, lastFlowToReconcile bool) error {
chVlanFilterFsm := make(chan Message, 2048)
pDevEntry := dh.getOnuDeviceEntry(ctx, true)
if pDevEntry == nil {
logger.Errorw(ctx, "No valid OnuDevice -aborting", log.Fields{"device-id": dh.deviceID})
return fmt.Errorf("no valid OnuDevice for device-id %x - aborting", dh.deviceID)
}
pVlanFilterFsm := NewUniVlanConfigFsm(ctx, dh, pDevEntry.PDevOmciCC, apUniPort, dh.pOnuTP,
pDevEntry.pOnuDB, aTpID, aDevEvent, "UniVlanConfigFsm", chVlanFilterFsm,
dh.pOpenOnuAc.AcceptIncrementalEvto, aCookieSlice, aMatchVlan, aSetVlan, aSetPcp, lastFlowToReconcile)
if pVlanFilterFsm != nil {
dh.lockVlanConfig.Lock()
//ensure the mutex is locked throughout the state transition to 'starting' to prevent unintended (ignored) events to be sent there
// (from parallel processing)
defer dh.lockVlanConfig.Unlock()
dh.UniVlanConfigFsmMap[apUniPort.uniID] = pVlanFilterFsm
pVlanFilterStatemachine := pVlanFilterFsm.pAdaptFsm.pFsm
if pVlanFilterStatemachine != nil {
if pVlanFilterStatemachine.Is(vlanStDisabled) {
if err := pVlanFilterStatemachine.Event(vlanEvStart); err != nil {
logger.Warnw(ctx, "UniVlanConfigFsm: can't start", log.Fields{"err": err})
return fmt.Errorf("can't start UniVlanConfigFsm for device-id %x", dh.deviceID)
}
/***** UniVlanConfigFsm started */
logger.Debugw(ctx, "UniVlanConfigFsm started", log.Fields{
"state": pVlanFilterStatemachine.Current(), "device-id": dh.deviceID,
"UniPort": apUniPort.portNo})
} else {
logger.Warnw(ctx, "wrong state of UniVlanConfigFsm - want: disabled", log.Fields{
"have": pVlanFilterStatemachine.Current(), "device-id": dh.deviceID})
return fmt.Errorf("uniVlanConfigFsm not in expected disabled state for device-id %x", dh.deviceID)
}
} else {
logger.Errorw(ctx, "UniVlanConfigFsm StateMachine invalid - cannot be executed!!", log.Fields{
"device-id": dh.deviceID})
return fmt.Errorf("uniVlanConfigFsm invalid for device-id %x", dh.deviceID)
}
} else {
logger.Errorw(ctx, "UniVlanConfigFsm could not be created - abort!!", log.Fields{
"device-id": dh.deviceID, "UniPort": apUniPort.portNo})
return fmt.Errorf("uniVlanConfigFsm could not be created for device-id %x", dh.deviceID)
}
return nil
}
//VerifyVlanConfigRequest checks on existence of a given uniPort
// and starts verification of flow config based on that
func (dh *deviceHandler) VerifyVlanConfigRequest(ctx context.Context, aUniID uint8, aTpID uint8) {
//ensure that the given uniID is available (configured) in the UniPort class (used for OMCI entities)
var pCurrentUniPort *onuUniPort
for _, uniPort := range dh.uniEntityMap {
// only if this port is validated for operState transfer
if uniPort.uniID == uint8(aUniID) {
pCurrentUniPort = uniPort
break //found - end search loop
}
}
if pCurrentUniPort == nil {
logger.Debugw(ctx, "VerifyVlanConfig aborted: requested uniID not found in PortDB",
log.Fields{"device-id": dh.deviceID, "uni-id": aUniID})
return
}
dh.verifyUniVlanConfigRequest(ctx, pCurrentUniPort, aTpID)
}
//verifyUniVlanConfigRequest checks on existence of flow configuration and starts it accordingly
func (dh *deviceHandler) verifyUniVlanConfigRequest(ctx context.Context, apUniPort *onuUniPort, aTpID uint8) {
//TODO!! verify and start pending flow configuration
//some pending config request my exist in case the UniVlanConfig FSM was already started - with internal data -
//but execution was set to 'on hold' as first the TechProfile config had to be applied
dh.lockVlanConfig.RLock()
if pVlanFilterFsm, exist := dh.UniVlanConfigFsmMap[apUniPort.uniID]; exist {
dh.lockVlanConfig.RUnlock()
//VlanFilterFsm exists and was already started (assumed to wait for TechProfile execution here)
pVlanFilterStatemachine := pVlanFilterFsm.pAdaptFsm.pFsm
if pVlanFilterStatemachine != nil {
//if this was an event of the TP processing that was waited for in the VlanFilterFsm
if pVlanFilterFsm.GetWaitingTpID() == aTpID {
if pVlanFilterStatemachine.Is(vlanStWaitingTechProf) {
if err := pVlanFilterStatemachine.Event(vlanEvContinueConfig); err != nil {
logger.Warnw(ctx, "UniVlanConfigFsm: can't continue processing", log.Fields{"err": err,
"device-id": dh.deviceID, "UniPort": apUniPort.portNo})
} else {
/***** UniVlanConfigFsm continued */
logger.Debugw(ctx, "UniVlanConfigFsm continued", log.Fields{
"state": pVlanFilterStatemachine.Current(), "device-id": dh.deviceID,
"UniPort": apUniPort.portNo})
}
} else if pVlanFilterStatemachine.Is(vlanStIncrFlowWaitTP) {
if err := pVlanFilterStatemachine.Event(vlanEvIncrFlowConfig); err != nil {
logger.Warnw(ctx, "UniVlanConfigFsm: can't continue processing", log.Fields{"err": err,
"device-id": dh.deviceID, "UniPort": apUniPort.portNo})
} else {
/***** UniVlanConfigFsm continued */
logger.Debugw(ctx, "UniVlanConfigFsm continued with incremental flow", log.Fields{
"state": pVlanFilterStatemachine.Current(), "device-id": dh.deviceID,
"UniPort": apUniPort.portNo})
}
} else {
logger.Debugw(ctx, "no state of UniVlanConfigFsm to be continued", log.Fields{
"have": pVlanFilterStatemachine.Current(), "device-id": dh.deviceID,
"UniPort": apUniPort.portNo})
}
} else {
logger.Debugw(ctx, "TechProfile Ready event for TpId that was not waited for in the VlanConfigFsm - continue waiting", log.Fields{
"state": pVlanFilterStatemachine.Current(), "device-id": dh.deviceID,
"UniPort": apUniPort.portNo, "techprofile-id (done)": aTpID})
}
} else {
logger.Debugw(ctx, "UniVlanConfigFsm StateMachine does not exist, no flow processing", log.Fields{
"device-id": dh.deviceID, "UniPort": apUniPort.portNo})
}
} else {
dh.lockVlanConfig.RUnlock()
}
}
//RemoveVlanFilterFsm deletes the stored pointer to the VlanConfigFsm
// intention is to provide this method to be called from VlanConfigFsm itself, when resources (and methods!) are cleaned up
func (dh *deviceHandler) RemoveVlanFilterFsm(ctx context.Context, apUniPort *onuUniPort) {
logger.Debugw(ctx, "remove UniVlanConfigFsm StateMachine", log.Fields{
"device-id": dh.deviceID, "uniPort": apUniPort.portNo})
//save to do, even if entry dows not exist
dh.lockVlanConfig.Lock()
delete(dh.UniVlanConfigFsmMap, apUniPort.uniID)
dh.lockVlanConfig.Unlock()
}
//startWritingOnuDataToKvStore initiates the KVStore write of ONU persistent data
func (dh *deviceHandler) startWritingOnuDataToKvStore(ctx context.Context, aPDevEntry *OnuDeviceEntry) error {
dh.mutexKvStoreContext.Lock() //this write routine may (could) be called with the same context,
defer dh.mutexKvStoreContext.Unlock() //this write routine may (could) be called with the same context,
// obviously then parallel processing on the cancel must be avoided
// deadline context to ensure completion of background routines waited for
//20200721: 10s proved to be less in 8*8 ONU test on local vbox machine with debug, might be further adapted
deadline := time.Now().Add(dh.pOpenOnuAc.maxTimeoutInterAdapterComm) //allowed run time to finish before execution
dctx, cancel := context.WithDeadline(context.Background(), deadline)
aPDevEntry.resetKvProcessingErrorIndication()
var wg sync.WaitGroup
wg.Add(1) // for the 1 go routine to finish
go aPDevEntry.updateOnuKvStore(log.WithSpanFromContext(dctx, ctx), &wg)
dh.waitForCompletion(ctx, cancel, &wg, "UpdateKvStore") //wait for background process to finish
return aPDevEntry.getKvProcessingErrorIndication()
}
//storePersUniFlowConfig updates local storage of OnuUniFlowConfig and writes it into kv-store afterwards to have it
//available for potential reconcilement
func (dh *deviceHandler) storePersUniFlowConfig(ctx context.Context, aUniID uint8,
aUniVlanFlowParams *[]uniVlanFlowParams, aWriteToKvStore bool) error {
if dh.isReconciling() {
logger.Debugw(ctx, "reconciling - don't store persistent UniFlowConfig", log.Fields{"device-id": dh.deviceID})
return nil
}
logger.Debugw(ctx, "Store or clear persistent UniFlowConfig", log.Fields{"device-id": dh.deviceID})
pDevEntry := dh.getOnuDeviceEntry(ctx, true)
if pDevEntry == nil {
logger.Errorw(ctx, "No valid OnuDevice - aborting", log.Fields{"device-id": dh.deviceID})
return fmt.Errorf("no valid OnuDevice: %s", dh.deviceID)
}
pDevEntry.updateOnuUniFlowConfig(aUniID, aUniVlanFlowParams)
if aWriteToKvStore {
return dh.startWritingOnuDataToKvStore(ctx, pDevEntry)
}
return nil
}
func (dh *deviceHandler) waitForCompletion(ctx context.Context, cancel context.CancelFunc, wg *sync.WaitGroup, aCallerIdent string) {
defer cancel() //ensure termination of context (may be pro forma)
wg.Wait()
logger.Debugw(ctx, "WaitGroup processing completed", log.Fields{
"device-id": dh.deviceID, "called from": aCallerIdent})
}
func (dh *deviceHandler) deviceReasonUpdate(ctx context.Context, deviceReason uint8, notifyCore bool) error {
dh.setDeviceReason(deviceReason)
if notifyCore {
//TODO with VOL-3045/VOL-3046: return the error and stop further processing at calling position
if err := dh.coreProxy.DeviceReasonUpdate(log.WithSpanFromContext(context.TODO(), ctx), dh.deviceID, deviceReasonMap[deviceReason]); err != nil {
logger.Errorf(ctx, "DeviceReasonUpdate error: %s",
log.Fields{"device-id": dh.deviceID, "error": err}, deviceReasonMap[deviceReason])
return err
}
logger.Infof(ctx, "DeviceReasonUpdate success: %s - device-id: %s", deviceReasonMap[deviceReason], dh.deviceID)
return nil
}
logger.Infof(ctx, "Don't notify core about DeviceReasonUpdate: %s - device-id: %s", deviceReasonMap[deviceReason], dh.deviceID)
return nil
}
func (dh *deviceHandler) storePersistentData(ctx context.Context) error {
pDevEntry := dh.getOnuDeviceEntry(ctx, true)
if pDevEntry == nil {
logger.Warnw(ctx, "No valid OnuDevice", log.Fields{"device-id": dh.deviceID})
return fmt.Errorf("no valid OnuDevice: %s", dh.deviceID)
}
return dh.startWritingOnuDataToKvStore(ctx, pDevEntry)
}
func (dh *deviceHandler) combineErrorStrings(errS ...error) error {
var errStr string = ""
for _, err := range errS {
if err != nil {
errStr = errStr + err.Error() + " "
}
}
if errStr != "" {
return fmt.Errorf("%s: %s", errStr, dh.deviceID)
}
return nil
}
// getUniPortMEEntityID takes uniPortNo as the input and returns the Entity ID corresponding to this UNI-G ME Instance
func (dh *deviceHandler) getUniPortMEEntityID(uniPortNo uint32) (uint16, error) {
dh.lockDevice.RLock()
defer dh.lockDevice.RUnlock()
if uniPort, ok := dh.uniEntityMap[uniPortNo]; ok {
return uniPort.entityID, nil
}
return 0, errors.New("error-fetching-uni-port")
}
// updatePmConfig updates the pm metrics config.
func (dh *deviceHandler) updatePmConfig(ctx context.Context, pmConfigs *voltha.PmConfigs) error {
var errorsList []error
logger.Infow(ctx, "update-pm-config", log.Fields{"device-id": dh.device.Id, "new-pm-configs": pmConfigs, "old-pm-config": dh.pmConfigs})
errorsList = append(dh.handleGlobalPmConfigUpdates(ctx, pmConfigs), errorsList...)
errorsList = append(dh.handleGroupPmConfigUpdates(ctx, pmConfigs), errorsList...)
errorsList = append(dh.handleStandalonePmConfigUpdates(ctx, pmConfigs), errorsList...)
// Note that if more than one pm config field is updated in a given call, it is possible that partial pm config is handled
// successfully.
// TODO: Although it is possible to revert to old config in case of partial failure, the code becomes quite complex. Needs more investigation
// Is it possible the rw-core reverts to old config on partial failure but adapter retains a partial new config?
if len(errorsList) > 0 {
logger.Errorw(ctx, "one-or-more-pm-config-failed", log.Fields{"device-id": dh.deviceID, "pmConfig": dh.pmConfigs})
return fmt.Errorf("errors-handling-one-or-more-pm-config, errors:%v", errorsList)
}
logger.Infow(ctx, "pm-config-updated", log.Fields{"device-id": dh.deviceID, "pmConfig": dh.pmConfigs})
return nil
}
func (dh *deviceHandler) handleGlobalPmConfigUpdates(ctx context.Context, pmConfigs *voltha.PmConfigs) []error {
var err error
var errorsList []error
logger.Infow(ctx, "handling-global-pm-config-params - start", log.Fields{"device-id": dh.device.Id})
if pmConfigs.DefaultFreq != dh.pmConfigs.DefaultFreq {
if err = dh.pOnuMetricsMgr.updateDefaultFrequency(ctx, pmConfigs); err != nil {
errorsList = append(errorsList, err)
}
}
logger.Infow(ctx, "handling-global-pm-config-params - done", log.Fields{"device-id": dh.device.Id})
return errorsList
}
func (dh *deviceHandler) handleGroupPmConfigUpdates(ctx context.Context, pmConfigs *voltha.PmConfigs) []error {
var err error
var errorsList []error
logger.Debugw(ctx, "handling-group-pm-config-params - start", log.Fields{"device-id": dh.device.Id})
// Check if group metric related config is updated
for _, v := range pmConfigs.Groups {
dh.pOnuMetricsMgr.onuMetricsManagerLock.RLock()
m, ok := dh.pOnuMetricsMgr.groupMetricMap[v.GroupName]
dh.pOnuMetricsMgr.onuMetricsManagerLock.RUnlock()
if ok && m.frequency != v.GroupFreq {
if err = dh.pOnuMetricsMgr.updateGroupFreq(ctx, v.GroupName, pmConfigs); err != nil {
errorsList = append(errorsList, err)
}
}
if ok && m.enabled != v.Enabled {
if err = dh.pOnuMetricsMgr.updateGroupSupport(ctx, v.GroupName, pmConfigs); err != nil {
errorsList = append(errorsList, err)
}
}
}
logger.Debugw(ctx, "handling-group-pm-config-params - done", log.Fields{"device-id": dh.device.Id})
return errorsList
}
func (dh *deviceHandler) handleStandalonePmConfigUpdates(ctx context.Context, pmConfigs *voltha.PmConfigs) []error {
var err error
var errorsList []error
logger.Debugw(ctx, "handling-individual-pm-config-params - start", log.Fields{"device-id": dh.device.Id})
// Check if standalone metric related config is updated
for _, v := range pmConfigs.Metrics {
dh.pOnuMetricsMgr.onuMetricsManagerLock.RLock()
m, ok := dh.pOnuMetricsMgr.standaloneMetricMap[v.Name]
dh.pOnuMetricsMgr.onuMetricsManagerLock.RUnlock()
if ok && m.frequency != v.SampleFreq {
if err = dh.pOnuMetricsMgr.updateMetricFreq(ctx, v.Name, pmConfigs); err != nil {
errorsList = append(errorsList, err)
}
}
if ok && m.enabled != v.Enabled {
if err = dh.pOnuMetricsMgr.updateMetricSupport(ctx, v.Name, pmConfigs); err != nil {
errorsList = append(errorsList, err)
}
}
}
logger.Debugw(ctx, "handling-individual-pm-config-params - done", log.Fields{"device-id": dh.device.Id})
return errorsList
}
// nolint: gocyclo
func (dh *deviceHandler) startCollector(ctx context.Context) {
logger.Debugf(ctx, "startingCollector")
// Start routine to process OMCI GET Responses
go dh.pOnuMetricsMgr.processOmciMessages(ctx)
// Initialize the next metric collection time.
// Normally done when the onu_metrics_manager is initialized the first time, but needed again later when ONU is
// reset like onu rebooted.
dh.pOnuMetricsMgr.initializeMetricCollectionTime(ctx)
dh.setCollectorIsRunning(true)
for {
select {
case <-dh.stopCollector:
dh.setCollectorIsRunning(false)
logger.Debugw(ctx, "stopping-collector-for-onu", log.Fields{"device-id": dh.device.Id})
// Stop the L2 PM FSM
go func() {
if dh.pOnuMetricsMgr.pAdaptFsm != nil && dh.pOnuMetricsMgr.pAdaptFsm.pFsm != nil {
if err := dh.pOnuMetricsMgr.pAdaptFsm.pFsm.Event(l2PmEventStop); err != nil {
logger.Errorw(ctx, "error calling event", log.Fields{"device-id": dh.deviceID, "err": err})
}
} else {
logger.Errorw(ctx, "metrics manager fsm not initialized", log.Fields{"device-id": dh.deviceID})
}
}()
if dh.pOnuMetricsMgr.getOmciProcessingStatus() {
dh.pOnuMetricsMgr.stopProcessingOmciResponses <- true // Stop the OMCI GET response processing routine
}
if dh.pOnuMetricsMgr.getTickGenerationStatus() {
dh.pOnuMetricsMgr.stopTicks <- true
}
return
case <-time.After(time.Duration(FrequencyGranularity) * time.Second): // Check every FrequencyGranularity to see if it is time for collecting metrics
if !dh.pmConfigs.FreqOverride { // If FreqOverride is false, then nextGlobalMetricCollectionTime applies
// If the current time is eqaul to or greater than the nextGlobalMetricCollectionTime, collect the group and standalone metrics
if time.Now().Equal(dh.pOnuMetricsMgr.nextGlobalMetricCollectionTime) || time.Now().After(dh.pOnuMetricsMgr.nextGlobalMetricCollectionTime) {
go dh.pOnuMetricsMgr.collectAllGroupAndStandaloneMetrics(ctx)
// Update the next metric collection time.
dh.pOnuMetricsMgr.nextGlobalMetricCollectionTime = time.Now().Add(time.Duration(dh.pmConfigs.DefaultFreq) * time.Second)
}
} else {
if dh.pmConfigs.Grouped { // metrics are managed as a group
// parse through the group and standalone metrics to see it is time to collect their metrics
dh.pOnuMetricsMgr.onuMetricsManagerLock.RLock() // Rlock as we are reading groupMetricMap and standaloneMetricMap
for n, g := range dh.pOnuMetricsMgr.groupMetricMap {
// If the group is enabled AND (current time is equal to OR after nextCollectionInterval, collect the group metric)
// Since the L2 PM counters are collected in a separate FSM, we should avoid those counters in the check.
if g.enabled && !g.isL2PMCounter && (time.Now().Equal(g.nextCollectionInterval) || time.Now().After(g.nextCollectionInterval)) {
go dh.pOnuMetricsMgr.collectGroupMetric(ctx, n)
}
}
for n, m := range dh.pOnuMetricsMgr.standaloneMetricMap {
// If the standalone is enabled AND (current time is equal to OR after nextCollectionInterval, collect the metric)
if m.enabled && (time.Now().Equal(m.nextCollectionInterval) || time.Now().After(m.nextCollectionInterval)) {
go dh.pOnuMetricsMgr.collectStandaloneMetric(ctx, n)
}
}
dh.pOnuMetricsMgr.onuMetricsManagerLock.RUnlock()
// parse through the group and update the next metric collection time
dh.pOnuMetricsMgr.onuMetricsManagerLock.Lock() // Lock as we are writing the next metric collection time
for _, g := range dh.pOnuMetricsMgr.groupMetricMap {
// If group enabled, and the nextCollectionInterval is old (before or equal to current time), update the next collection time stamp
// Since the L2 PM counters are collected and managed in a separate FSM, we should avoid those counters in the check.
if g.enabled && !g.isL2PMCounter && (g.nextCollectionInterval.Before(time.Now()) || g.nextCollectionInterval.Equal(time.Now())) {
g.nextCollectionInterval = time.Now().Add(time.Duration(g.frequency) * time.Second)
}
}
// parse through the standalone metrics and update the next metric collection time
for _, m := range dh.pOnuMetricsMgr.standaloneMetricMap {
// If standalone metrics enabled, and the nextCollectionInterval is old (before or equal to current time), update the next collection time stamp
if m.enabled && (m.nextCollectionInterval.Before(time.Now()) || m.nextCollectionInterval.Equal(time.Now())) {
m.nextCollectionInterval = time.Now().Add(time.Duration(m.frequency) * time.Second)
}
}
dh.pOnuMetricsMgr.onuMetricsManagerLock.Unlock()
} /* else { // metrics are not managed as a group
// TODO: We currently do not have standalone metrics. When available, add code here to fetch the metric.
} */
}
}
}
}
func (dh *deviceHandler) getUniPortStatus(ctx context.Context, uniInfo *extension.GetOnuUniInfoRequest) *extension.SingleGetValueResponse {
portStatus := NewUniPortStatus(dh.pOnuOmciDevice.PDevOmciCC)
return portStatus.getUniPortStatus(ctx, uniInfo.UniIndex)
}
func (dh *deviceHandler) isFsmInOmciIdleState(ctx context.Context, pFsm *fsm.FSM, wantedState string) bool {
if pFsm == nil {
return true //FSM not active - so there is no activity on omci
}
return pFsm.Current() == wantedState
}
func (dh *deviceHandler) isFsmInOmciIdleStateDefault(ctx context.Context, omciFsm usedOmciConfigFsms, wantedState string) bool {
var pFsm *fsm.FSM
//note/TODO!!: might be that access to all these specific FSM; pointers need a semaphore protection as well, cmp lockUpgradeFsm
switch omciFsm {
case cUploadFsm:
{
pFsm = dh.pOnuOmciDevice.pMibUploadFsm.pFsm
}
case cDownloadFsm:
{
pFsm = dh.pOnuOmciDevice.pMibDownloadFsm.pFsm
}
case cUniLockFsm:
{
pFsm = dh.pLockStateFsm.pAdaptFsm.pFsm
}
case cUniUnLockFsm:
{
pFsm = dh.pUnlockStateFsm.pAdaptFsm.pFsm
}
case cL2PmFsm:
{
if dh.pOnuMetricsMgr != nil && dh.pOnuMetricsMgr.pAdaptFsm != nil {
pFsm = dh.pOnuMetricsMgr.pAdaptFsm.pFsm
} else {
return true //FSM not active - so there is no activity on omci
}
}
case cOnuUpgradeFsm:
{
dh.lockUpgradeFsm.RLock()
defer dh.lockUpgradeFsm.RUnlock()
pFsm = dh.pOnuUpradeFsm.pAdaptFsm.pFsm
}
default:
{
logger.Errorw(ctx, "invalid stateMachine selected for idle check", log.Fields{
"device-id": dh.deviceID, "selectedFsm number": omciFsm})
return false //logical error in FSM check, do not not indicate 'idle' - we can't be sure
}
}
return dh.isFsmInOmciIdleState(ctx, pFsm, wantedState)
}
func (dh *deviceHandler) isAniConfigFsmInOmciIdleState(ctx context.Context, omciFsm usedOmciConfigFsms, idleState string) bool {
for _, v := range dh.pOnuTP.pAniConfigFsm {
if !dh.isFsmInOmciIdleState(ctx, v.pAdaptFsm.pFsm, idleState) {
return false
}
}
return true
}
func (dh *deviceHandler) isUniVlanConfigFsmInOmciIdleState(ctx context.Context, omciFsm usedOmciConfigFsms, idleState string) bool {
dh.lockVlanConfig.RLock()
defer dh.lockVlanConfig.RUnlock()
for _, v := range dh.UniVlanConfigFsmMap {
if !dh.isFsmInOmciIdleState(ctx, v.pAdaptFsm.pFsm, idleState) {
return false
}
}
return true //FSM not active - so there is no activity on omci
}
func (dh *deviceHandler) checkUserServiceExists(ctx context.Context) bool {
dh.lockVlanConfig.RLock()
defer dh.lockVlanConfig.RUnlock()
for _, v := range dh.UniVlanConfigFsmMap {
if v.pAdaptFsm.pFsm != nil {
if v.pAdaptFsm.pFsm.Is(cVlanFsmConfiguredState) {
return true //there is at least one VLAN FSM with some active configuration
}
}
}
return false //there is no VLAN FSM with some active configuration
}
func (dh *deviceHandler) checkAuditStartCondition(ctx context.Context, callingFsm usedOmciConfigFsms) bool {
for fsmName, fsmStruct := range fsmOmciIdleStateFuncMap {
if fsmName != callingFsm && !fsmStruct.omciIdleCheckFunc(dh, ctx, fsmName, fsmStruct.omciIdleState) {
return false
}
}
// a further check is done to identify, if at least some data traffic related configuration exists
// so that a user of this ONU could be 'online' (otherwise it makes no sense to check the MDS [with the intention to keep the user service up])
return dh.checkUserServiceExists(ctx)
}
func (dh *deviceHandler) prepareReconcilingWithActiveAdapter(ctx context.Context) {
logger.Debugw(ctx, "prepare to reconcile the ONU with adapter using persistency data", log.Fields{"device-id": dh.device.Id})
if err := dh.resetFsms(ctx, false); err != nil {
logger.Errorw(ctx, "reset of FSMs failed!", log.Fields{"device-id": dh.deviceID, "error": err})
// TODO: fatal error reset ONU, delete deviceHandler!
return
}
dh.uniEntityMap = make(map[uint32]*onuUniPort)
dh.startReconciling(ctx, false)
}
func (dh *deviceHandler) setCollectorIsRunning(flagValue bool) {
dh.mutexCollectorFlag.Lock()
dh.collectorIsRunning = flagValue
dh.mutexCollectorFlag.Unlock()
}
func (dh *deviceHandler) getCollectorIsRunning() bool {
dh.mutexCollectorFlag.RLock()
flagValue := dh.collectorIsRunning
dh.mutexCollectorFlag.RUnlock()
return flagValue
}
func (dh *deviceHandler) setAlarmManagerIsRunning(flagValue bool) {
dh.mutextAlarmManagerFlag.Lock()
dh.alarmManagerIsRunning = flagValue
dh.mutextAlarmManagerFlag.Unlock()
}
func (dh *deviceHandler) getAlarmManagerIsRunning(ctx context.Context) bool {
dh.mutextAlarmManagerFlag.RLock()
flagValue := dh.alarmManagerIsRunning
logger.Debugw(ctx, "alarm-manager-is-running", log.Fields{"flag": dh.alarmManagerIsRunning})
dh.mutextAlarmManagerFlag.RUnlock()
return flagValue
}
func (dh *deviceHandler) startAlarmManager(ctx context.Context) {
logger.Debugf(ctx, "startingAlarmManager")
// Start routine to process OMCI GET Responses
go dh.pAlarmMgr.startOMCIAlarmMessageProcessing(ctx)
dh.setAlarmManagerIsRunning(true)
if stop := <-dh.stopAlarmManager; stop {
logger.Debugw(ctx, "stopping-collector-for-onu", log.Fields{"device-id": dh.device.Id})
dh.setAlarmManagerIsRunning(false)
go func() {
if dh.pAlarmMgr.alarmSyncFsm != nil && dh.pAlarmMgr.alarmSyncFsm.pFsm != nil {
_ = dh.pAlarmMgr.alarmSyncFsm.pFsm.Event(asEvStop)
}
}()
dh.pAlarmMgr.stopProcessingOmciMessages <- true // Stop the OMCI routines if any(This will stop the fsms also)
dh.pAlarmMgr.stopAlarmAuditTimer <- struct{}{}
logger.Debugw(ctx, "sent-all-stop-signals-to-alarm-manager", log.Fields{"device-id": dh.device.Id})
}
}
func (dh *deviceHandler) startReconciling(ctx context.Context, skipOnuConfig bool) {
logger.Debugw(ctx, "start reconciling", log.Fields{"skipOnuConfig": skipOnuConfig, "device-id": dh.deviceID})
if !dh.isReconciling() {
go func() {
logger.Debugw(ctx, "wait for channel signal or timeout",
log.Fields{"timeout": dh.pOpenOnuAc.maxTimeoutReconciling, "device-id": dh.deviceID})
select {
case success := <-dh.chReconcilingFinished:
if success {
if onuDevEntry := dh.getOnuDeviceEntry(ctx, true); onuDevEntry == nil {
logger.Errorw(ctx, "No valid OnuDevice - aborting Core DeviceStateUpdate",
log.Fields{"device-id": dh.deviceID})
} else {
connectStatus := voltha.ConnectStatus_UNREACHABLE
operState := voltha.OperStatus_UNKNOWN
if onuDevEntry.sOnuPersistentData.PersOperState == "up" {
connectStatus = voltha.ConnectStatus_REACHABLE
if !onuDevEntry.sOnuPersistentData.PersUniDisableDone {
if onuDevEntry.sOnuPersistentData.PersUniUnlockDone {
operState = voltha.OperStatus_ACTIVE
} else {
operState = voltha.OperStatus_ACTIVATING
}
}
} else if onuDevEntry.sOnuPersistentData.PersOperState == "down" ||
onuDevEntry.sOnuPersistentData.PersOperState == "unknown" ||
onuDevEntry.sOnuPersistentData.PersOperState == "" {
operState = voltha.OperStatus_DISCOVERED
}
logger.Debugw(ctx, "Core DeviceStateUpdate", log.Fields{"connectStatus": connectStatus, "operState": operState})
if err := dh.coreProxy.DeviceStateUpdate(ctx, dh.deviceID, connectStatus, operState); err != nil {
logger.Errorw(ctx, "unable to update device state to core",
log.Fields{"OperState": onuDevEntry.sOnuPersistentData.PersOperState, "Err": err})
}
}
logger.Debugw(ctx, "reconciling has been finished in time",
log.Fields{"device-id": dh.deviceID})
} else {
logger.Errorw(ctx, "wait for reconciling aborted",
log.Fields{"device-id": dh.deviceID})
}
case <-time.After(dh.pOpenOnuAc.maxTimeoutReconciling):
//TODO: handle notification to core if reconciling timed out
logger.Errorw(ctx, "timeout waiting for reconciling to be finished!",
log.Fields{"device-id": dh.deviceID})
}
dh.mutexReconcilingFlag.Lock()
dh.reconciling = cNoReconciling
dh.mutexReconcilingFlag.Unlock()
}()
}
dh.mutexReconcilingFlag.Lock()
if skipOnuConfig {
dh.reconciling = cSkipOnuConfigReconciling
} else {
dh.reconciling = cOnuConfigReconciling
}
dh.mutexReconcilingFlag.Unlock()
}
func (dh *deviceHandler) stopReconciling(ctx context.Context) {
logger.Debugw(ctx, "stop reconciling", log.Fields{"device-id": dh.deviceID})
if dh.isReconciling() {
dh.chReconcilingFinished <- true
} else {
logger.Infow(ctx, "reconciling is not running", log.Fields{"device-id": dh.deviceID})
}
}
func (dh *deviceHandler) isReconciling() bool {
dh.mutexReconcilingFlag.RLock()
defer dh.mutexReconcilingFlag.RUnlock()
return dh.reconciling != cNoReconciling
}
func (dh *deviceHandler) isSkipOnuConfigReconciling() bool {
dh.mutexReconcilingFlag.RLock()
defer dh.mutexReconcilingFlag.RUnlock()
return dh.reconciling == cSkipOnuConfigReconciling
}
func (dh *deviceHandler) setDeviceReason(value uint8) {
dh.mutexDeviceReason.Lock()
dh.deviceReason = value
dh.mutexDeviceReason.Unlock()
}
func (dh *deviceHandler) getDeviceReason() uint8 {
dh.mutexDeviceReason.RLock()
value := dh.deviceReason
dh.mutexDeviceReason.RUnlock()
return value
}
func (dh *deviceHandler) getDeviceReasonString() string {
return deviceReasonMap[dh.getDeviceReason()]
}
func (dh *deviceHandler) setReconcilingFlows(value bool) {
dh.mutexReconcilingFlowsFlag.Lock()
dh.reconcilingFlows = value
dh.mutexReconcilingFlowsFlag.Unlock()
}
func (dh *deviceHandler) isReconcilingFlows() bool {
dh.mutexReconcilingFlowsFlag.RLock()
value := dh.reconcilingFlows
dh.mutexReconcilingFlowsFlag.RUnlock()
return value
}
func (dh *deviceHandler) setReadyForOmciConfig(flagValue bool) {
dh.mutexReadyForOmciConfig.Lock()
dh.readyForOmciConfig = flagValue
dh.mutexReadyForOmciConfig.Unlock()
}
func (dh *deviceHandler) isReadyForOmciConfig() bool {
dh.mutexReadyForOmciConfig.RLock()
flagValue := dh.readyForOmciConfig
dh.mutexReadyForOmciConfig.RUnlock()
return flagValue
}