| /* |
| * Copyright 2020-present Open Networking Foundation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| //Package adaptercoreonu provides the utility for onu devices, flows and statistics |
| package adaptercoreonu |
| |
| import ( |
| "container/list" |
| "context" |
| "encoding/binary" |
| "encoding/hex" |
| "errors" |
| "strconv" |
| "sync" |
| |
| //"time" |
| |
| "github.com/google/gopacket" |
| // TODO!!! Some references could be resolved auto, but some need specific context .... |
| gp "github.com/google/gopacket" |
| |
| "github.com/opencord/omci-lib-go" |
| me "github.com/opencord/omci-lib-go/generated" |
| "github.com/opencord/voltha-lib-go/v3/pkg/adapters/adapterif" |
| |
| //"github.com/opencord/voltha-lib-go/v3/pkg/kafka" |
| "github.com/opencord/voltha-lib-go/v3/pkg/log" |
| ic "github.com/opencord/voltha-protos/v3/go/inter_container" |
| //"github.com/opencord/voltha-protos/v3/go/openflow_13" |
| //"github.com/opencord/voltha-protos/v3/go/voltha" |
| ) |
| |
| // ### OMCI related definitions - retrieved from Python adapter code/trace #### |
| const ConstDefaultOmciTimeout = 10 // ( 3 ?) Seconds |
| |
| const galEthernetEID = uint16(1) |
| const maxGemPayloadSize = uint16(48) |
| const connectivityModeValue = uint8(5) |
| |
| //const defaultTPID = uint16(0x8100) |
| //const broadComDefaultVID = uint16(4091) |
| const macBridgeServiceProfileEID = uint16(0x201) // TODO: most all these need better definition or tuning |
| const ieeeMapperServiceProfileEID = uint16(0x8001) |
| const macBridgePortAniEID = uint16(0x2102) |
| |
| // ### OMCI related definitions - end |
| |
| //CallbackPairEntry to be used for OMCI send/receive correlation |
| type CallbackPairEntry struct { |
| cbRespChannel chan Message |
| cbFunction func(*omci.OMCI, *gp.Packet, chan Message) error |
| } |
| |
| //CallbackPair to be used for ReceiveCallback init |
| type CallbackPair struct { |
| cbKey uint16 |
| cbEntry CallbackPairEntry |
| } |
| |
| type omciTransferStructure struct { |
| txFrame []byte |
| timeout int |
| retry int |
| highPrio bool |
| } |
| |
| //OmciCC structure holds information needed for OMCI communication (to/from OLT Adapter) |
| type OmciCC struct { |
| enabled bool |
| pOnuDeviceEntry *OnuDeviceEntry |
| deviceID string |
| pBaseDeviceHandler *DeviceHandler |
| coreProxy adapterif.CoreProxy |
| adapterProxy adapterif.AdapterProxy |
| supportExtMsg bool |
| //txRequest |
| //rxResponse |
| //pendingRequest |
| txFrames, txOnuFrames uint32 |
| rxFrames, rxOnuFrames, rxOnuDiscards uint32 |
| |
| // OMCI params |
| mutexTid sync.Mutex |
| tid uint16 |
| mutexHpTid sync.Mutex |
| hpTid uint16 |
| uploadSequNo uint16 |
| uploadNoOfCmds uint16 |
| |
| mutexTxQueue sync.Mutex |
| txQueue *list.List |
| mutexRxSchedMap sync.Mutex |
| rxSchedulerMap map[uint16]CallbackPairEntry |
| pLastTxMeInstance *me.ManagedEntity |
| } |
| |
| //NewOmciCC constructor returns a new instance of a OmciCC |
| //mib_db (as well as not inluded alarm_db not really used in this code? VERIFY!!) |
| func NewOmciCC(ctx context.Context, onuDeviceEntry *OnuDeviceEntry, |
| deviceID string, deviceHandler *DeviceHandler, |
| coreProxy adapterif.CoreProxy, adapterProxy adapterif.AdapterProxy) *OmciCC { |
| logger.Infow("init-omciCC", log.Fields{"device-id": deviceID}) |
| var omciCC OmciCC |
| omciCC.enabled = false |
| omciCC.pOnuDeviceEntry = onuDeviceEntry |
| omciCC.deviceID = deviceID |
| omciCC.pBaseDeviceHandler = deviceHandler |
| omciCC.coreProxy = coreProxy |
| omciCC.adapterProxy = adapterProxy |
| omciCC.supportExtMsg = false |
| omciCC.txFrames = 0 |
| omciCC.txOnuFrames = 0 |
| omciCC.rxFrames = 0 |
| omciCC.rxOnuFrames = 0 |
| omciCC.rxOnuDiscards = 0 |
| omciCC.tid = 0x1 |
| omciCC.hpTid = 0x8000 |
| omciCC.uploadSequNo = 0 |
| omciCC.uploadNoOfCmds = 0 |
| |
| omciCC.txQueue = list.New() |
| omciCC.rxSchedulerMap = make(map[uint16]CallbackPairEntry) |
| |
| return &omciCC |
| } |
| |
| // Rx handler for omci messages |
| func (oo *OmciCC) ReceiveOnuMessage(ctx context.Context, omciMsg *omci.OMCI) error { |
| logger.Debugw("rx-onu-autonomous-message", log.Fields{"omciMsgType": omciMsg.MessageType, |
| "payload": hex.EncodeToString(omciMsg.Payload)}) |
| /* |
| msgType = rxFrame.fields["message_type"] //assumed OmciOperationsValue |
| rxOnuFrames++ |
| |
| switch msgType { |
| case AlarmNotification: |
| { |
| logger.Info("Unhandled: received-onu-alarm-message") |
| // python code was: |
| //if msg_type == EntityOperations.AlarmNotification.value: |
| // topic = OMCI_CC.event_bus_topic(self._device_id, RxEvent.Alarm_Notification) |
| // self.reactor.callLater(0, self.event_bus.publish, topic, msg) |
| // |
| return errors.New("RxAlarmNotification unimplemented") |
| } |
| case AttributeValueChange: |
| { |
| logger.Info("Unhandled: received-attribute-value-change") |
| // python code was: |
| //elif msg_type == EntityOperations.AttributeValueChange.value: |
| // topic = OMCI_CC.event_bus_topic(self._device_id, RxEvent.AVC_Notification) |
| // self.reactor.callLater(0, self.event_bus.publish, topic, msg) |
| // |
| return errors.New("RxAttributeValueChange unimplemented") |
| } |
| case TestResult: |
| { |
| logger.Info("Unhandled: received-test-result") |
| // python code was: |
| //elif msg_type == EntityOperations.TestResult.value: |
| // topic = OMCI_CC.event_bus_topic(self._device_id, RxEvent.Test_Result) |
| // self.reactor.callLater(0, self.event_bus.publish, topic, msg) |
| // |
| return errors.New("RxTestResult unimplemented") |
| } |
| default: |
| { |
| logger.Errorw("rx-onu-unsupported-autonomous-message", log.Fields{"msgType": msgType}) |
| rxOnuDiscards++ |
| return errors.New("RxOnuMsgType unimplemented") |
| } |
| } |
| */ |
| return errors.New("receiveOnuMessage unimplemented") |
| } |
| |
| // Rx handler for onu messages |
| // e.g. would call ReceiveOnuMessage() in case of TID=0 or Action=test ... |
| func (oo *OmciCC) ReceiveMessage(ctx context.Context, rxMsg []byte) error { |
| //logger.Debugw("cc-receive-omci-message", log.Fields{"RxOmciMessage-x2s": hex.EncodeToString(rxMsg)}) |
| if len(rxMsg) >= 44 { // then it should normally include the BaseFormat trailer Len |
| // NOTE: autocorrection only valid for OmciBaseFormat, which is not specifically verified here!!! |
| // (am extendedFormat message could be destroyed this way!) |
| trailerLenData := rxMsg[42:44] |
| trailerLen := binary.BigEndian.Uint16(trailerLenData) |
| //logger.Debugw("omci-received-trailer-len", log.Fields{"Length": trailerLen}) |
| if trailerLen != 40 { // invalid base Format entry -> autocorrect |
| binary.BigEndian.PutUint16(rxMsg[42:44], 40) |
| logger.Debug("cc-corrected-omci-message: trailer len inserted") |
| } |
| } else { |
| logger.Errorw("received omci-message too small for OmciBaseFormat - abort", log.Fields{"Length": len(rxMsg)}) |
| return errors.New("rxOmciMessage too small for BaseFormat") |
| } |
| |
| packet := gopacket.NewPacket(rxMsg, omci.LayerTypeOMCI, gopacket.NoCopy) |
| if packet == nil { |
| logger.Error("omci-message could not be decoded") |
| return errors.New("could not decode rxMsg as OMCI") |
| } |
| omciLayer := packet.Layer(omci.LayerTypeOMCI) |
| if omciLayer == nil { |
| logger.Error("omci-message could not decode omci layer") |
| return errors.New("could not decode omci layer") |
| } |
| omciMsg, ok := omciLayer.(*omci.OMCI) |
| if !ok { |
| logger.Error("omci-message could not assign omci layer") |
| return errors.New("could not assign omci layer") |
| } |
| logger.Debugw("omci-message-decoded:", log.Fields{"omciMsgType": omciMsg.MessageType, |
| "transCorrId": strconv.FormatInt(int64(omciMsg.TransactionID), 16), "DeviceIdent": omciMsg.DeviceIdentifier}) |
| if byte(omciMsg.MessageType) & ^me.AK == 0 { |
| // Not a response |
| logger.Debug("RxMsg is no Omci Response Message") |
| if omciMsg.TransactionID == 0 { |
| return oo.ReceiveOnuMessage(ctx, omciMsg) |
| } |
| logger.Errorw("Unexpected TransCorrId != 0 not accepted for autonomous messages", |
| log.Fields{"msgType": omciMsg.MessageType, "payload": hex.EncodeToString(omciMsg.Payload)}) |
| return errors.New("autonomous Omci Message with TranSCorrId != 0 not acccepted") |
| |
| } |
| //logger.Debug("RxMsg is a Omci Response Message: try to schedule it to the requester") |
| oo.mutexRxSchedMap.Lock() |
| rxCallbackEntry, ok := oo.rxSchedulerMap[omciMsg.TransactionID] |
| if ok && rxCallbackEntry.cbFunction != nil { |
| //disadvantage of decoupling: error verification made difficult, but anyway the question is |
| // how to react on erroneous frame reception, maybe can simply be ignored |
| go rxCallbackEntry.cbFunction(omciMsg, &packet, rxCallbackEntry.cbRespChannel) |
| // having posted the response the request is regarded as 'done' |
| delete(oo.rxSchedulerMap, omciMsg.TransactionID) |
| oo.mutexRxSchedMap.Unlock() |
| } else { |
| oo.mutexRxSchedMap.Unlock() |
| logger.Error("omci-message-response for not registered transCorrId") |
| return errors.New("could not find registered response handler tor transCorrId") |
| } |
| |
| return nil |
| /* py code was: |
| Receive and OMCI message from the proxy channel to the OLT. |
| |
| Call this from your ONU Adapter on a new OMCI Rx on the proxy channel |
| :param msg: (str) OMCI binary message (used as input to Scapy packet decoder) |
| """ |
| if not self.enabled: |
| return |
| |
| try: |
| now = arrow.utcnow() |
| d = None |
| |
| # NOTE: Since we may need to do an independent ME map on a per-ONU basis |
| # save the current value of the entity_id_to_class_map, then |
| # replace it with our custom one before decode, and then finally |
| # restore it later. Tried other ways but really made the code messy. |
| saved_me_map = omci_entities.entity_id_to_class_map |
| omci_entities.entity_id_to_class_map = self._me_map |
| |
| try: |
| rx_frame = msg if isinstance(msg, OmciFrame) else OmciFrame(msg) |
| self.logger.debug('recv-omci-msg', omci_msg=hexlify(msg)) |
| except KeyError as e: |
| # Unknown, Unsupported, or vendor-specific ME. Key is the unknown classID |
| self.logger.debug('frame-decode-key-error', omci_msg=hexlify(msg), e=e) |
| rx_frame = self._decode_unknown_me(msg) |
| self._rx_unknown_me += 1 |
| |
| except Exception as e: |
| self.logger.exception('frame-decode', omci_msg=hexlify(msg), e=e) |
| return |
| |
| finally: |
| omci_entities.entity_id_to_class_map = saved_me_map # Always restore it. |
| |
| rx_tid = rx_frame.fields['transaction_id'] |
| msg_type = rx_frame.fields['message_type'] |
| self.logger.debug('Received message for rx_tid', rx_tid = rx_tid, msg_type = msg_type) |
| # Filter the Test Result frame and route through receive onu |
| # message method. |
| if rx_tid == 0 or msg_type == EntityOperations.TestResult.value: |
| self.logger.debug('Receive ONU message', rx_tid=0) |
| return self._receive_onu_message(rx_frame) |
| |
| # Previously unreachable if this is the very first round-trip Rx or we |
| # have been running consecutive errors |
| if self._rx_frames == 0 or self._consecutive_errors != 0: |
| self.logger.debug('Consecutive errors for rx', err = self._consecutive_errors) |
| self.reactor.callLater(0, self._publish_connectivity_event, True) |
| |
| self._rx_frames += 1 |
| self._consecutive_errors = 0 |
| |
| try: |
| high_priority = self._tid_is_high_priority(rx_tid) |
| index = self._get_priority_index(high_priority) |
| |
| # (timestamp, defer, frame, timeout, retry, delayedCall) |
| last_tx_tuple = self._tx_request[index] |
| |
| if last_tx_tuple is None or \ |
| last_tx_tuple[OMCI_CC.REQUEST_FRAME].fields.get('transaction_id') != rx_tid: |
| # Possible late Rx on a message that timed-out |
| if last_tx_tuple: |
| self.logger.debug('Unknown message', rx_tid=rx_tid, |
| tx_id=last_tx_tuple[OMCI_CC.REQUEST_FRAME].fields.get('transaction_id')) |
| self._rx_unknown_tid += 1 |
| self._rx_late += 1 |
| return |
| |
| ts, d, tx_frame, timeout, retry, dc = last_tx_tuple |
| if dc is not None and not dc.cancelled and not dc.called: |
| dc.cancel() |
| |
| _secs = self._update_rx_tx_stats(now, ts) |
| |
| # Late arrival already serviced by a timeout? |
| if d.called: |
| self._rx_late += 1 |
| self.logger.debug('Serviced by timeout. Late arrival', rx_late = self._rx_late) |
| return |
| |
| except Exception as e: |
| self.logger.exception('frame-match', msg=hexlify(msg), e=e) |
| if d is not None: |
| return d.errback(failure.Failure(e)) |
| return |
| |
| # Publish Rx event to listeners in a different task |
| self.logger.debug('Publish rx event', rx_tid = rx_tid, |
| tx_tid = tx_frame.fields['transaction_id']) |
| reactor.callLater(0, self._publish_rx_frame, tx_frame, rx_frame) |
| |
| # begin success callback chain (will cancel timeout and queue next Tx message) |
| self._rx_response[index] = rx_frame |
| d.callback(rx_frame) |
| |
| except Exception as e: |
| self.logger.exception('rx-msg', e=e) |
| */ |
| } |
| |
| func (oo *OmciCC) PublishRxResponseFrame(ctx context.Context, txFrame []byte, rxFrame []byte) error { |
| return errors.New("publishRxResponseFrame unimplemented") |
| /* |
| def _publish_rx_frame(self, tx_frame, rx_frame): |
| */ |
| } |
| |
| //Queue the OMCI Frame for a transmit to the ONU via the proxy_channel |
| func (oo *OmciCC) Send(ctx context.Context, txFrame []byte, timeout int, retry int, highPrio bool, |
| receiveCallbackPair CallbackPair) error { |
| |
| logger.Debugw("register-response-callback:", log.Fields{"for TansCorrId": receiveCallbackPair.cbKey}) |
| // it could be checked, if the callback keay is already registered - but simply overwrite may be acceptable ... |
| oo.mutexRxSchedMap.Lock() |
| oo.rxSchedulerMap[receiveCallbackPair.cbKey] = receiveCallbackPair.cbEntry |
| oo.mutexRxSchedMap.Unlock() |
| |
| //just use a simple list for starting - might need some more effort, especially for multi source write access |
| omciTxRequest := omciTransferStructure{ |
| txFrame, |
| timeout, |
| retry, |
| highPrio, |
| } |
| oo.mutexTxQueue.Lock() |
| oo.txQueue.PushBack(omciTxRequest) // enqueue |
| oo.mutexTxQueue.Unlock() |
| |
| // for first test just bypass and send directly: |
| go oo.sendNextRequest(ctx) |
| return nil |
| } |
| |
| //Pull next tx request and send it |
| func (oo *OmciCC) sendNextRequest(ctx context.Context) error { |
| // return errors.New("sendNextRequest unimplemented") |
| |
| // just try to get something transferred !! |
| // avoid accessing the txQueue from parallel send requests |
| // block parallel omci send requests at least until SendIAP is 'committed' |
| // that should be feasible for an onu instance as on OMCI anyway window size 1 is assumed |
| oo.mutexTxQueue.Lock() |
| defer oo.mutexTxQueue.Unlock() |
| for oo.txQueue.Len() > 0 { |
| queueElement := oo.txQueue.Front() // First element |
| omciTxRequest := queueElement.Value.(omciTransferStructure) |
| /* compare olt device handler code: |
| func (dh *DeviceHandler) omciIndication(omciInd *oop.OmciIndication) { |
| logger.Debugw("omci indication", log.Fields{"intfID": omciInd.IntfId, "onuID": omciInd.OnuId}) |
| var deviceType string |
| var deviceID string |
| var proxyDeviceID string |
| |
| onuKey := dh.formOnuKey(omciInd.IntfId, omciInd.OnuId) |
| |
| if onuInCache, ok := dh.onus.Load(onuKey); !ok { |
| |
| logger.Debugw("omci indication for a device not in cache.", log.Fields{"intfID": omciInd.IntfId, "onuID": omciInd.OnuId}) |
| ponPort := IntfIDToPortNo(omciInd.GetIntfId(), voltha.Port_PON_OLT) |
| kwargs := make(map[string]interface{}) |
| kwargs["onu_id"] = omciInd.OnuId |
| kwargs["parent_port_no"] = ponPort |
| |
| onuDevice, err := dh.coreProxy.GetChildDevice(context.TODO(), dh.device.Id, kwargs) |
| if err != nil { |
| logger.Errorw("onu not found", log.Fields{"intfID": omciInd.IntfId, "onuID": omciInd.OnuId, "error": err}) |
| return |
| } |
| deviceType = onuDevice.Type |
| deviceID = onuDevice.Id |
| proxyDeviceID = onuDevice.ProxyAddress.DeviceId |
| //if not exist in cache, then add to cache. |
| dh.onus.Store(onuKey, NewOnuDevice(deviceID, deviceType, onuDevice.SerialNumber, omciInd.OnuId, omciInd.IntfId, proxyDeviceID)) |
| } else { |
| //found in cache |
| logger.Debugw("omci indication for a device in cache.", log.Fields{"intfID": omciInd.IntfId, "onuID": omciInd.OnuId}) |
| deviceType = onuInCache.(*OnuDevice).deviceType |
| deviceID = onuInCache.(*OnuDevice).deviceID |
| proxyDeviceID = onuInCache.(*OnuDevice).proxyDeviceID |
| } |
| */ |
| /* and compare onu_adapter py code: |
| omci_msg = InterAdapterOmciMessage( |
| message=bytes(frame), |
| proxy_address=self._proxy_address, |
| connect_status=self._device.connect_status) |
| |
| self.logger.debug('sent-omci-msg', tid=tx_tid, omci_msg=hexlify(bytes(frame))) |
| |
| yield self._adapter_proxy.send_inter_adapter_message( |
| msg=omci_msg, |
| type=InterAdapterMessageType.OMCI_REQUEST, |
| from_adapter=self._device.type, |
| to_adapter=self._proxy_address.device_type, |
| to_device_id=self._device_id, |
| proxy_device_id=self._proxy_address.device_id |
| ) |
| */ |
| device, err := oo.coreProxy.GetDevice(ctx, |
| oo.pBaseDeviceHandler.deviceID, oo.deviceID) //parent, child |
| if err != nil || device == nil { |
| /*TODO: needs to handle error scenarios */ |
| logger.Errorw("Failed to fetch device", log.Fields{"err": err, "ParentId": oo.pBaseDeviceHandler.deviceID, |
| "ChildId": oo.deviceID}) |
| return errors.New("failed to fetch device") |
| } |
| |
| logger.Debugw("omci-message-sending", log.Fields{"fromDeviceType": oo.pBaseDeviceHandler.DeviceType, |
| "toDeviceType": oo.pBaseDeviceHandler.ProxyAddressType, |
| "onuDeviceID": oo.deviceID, "proxyDeviceID": oo.pBaseDeviceHandler.ProxyAddressID}) |
| logger.Debugw("omci-message-to-send:", |
| log.Fields{"TxOmciMessage": hex.EncodeToString(omciTxRequest.txFrame)}) |
| |
| omciMsg := &ic.InterAdapterOmciMessage{Message: omciTxRequest.txFrame} |
| if sendErr := oo.adapterProxy.SendInterAdapterMessage(context.Background(), omciMsg, |
| ic.InterAdapterMessageType_OMCI_REQUEST, |
| //fromType,toType,toDevId, ProxyDevId |
| oo.pBaseDeviceHandler.DeviceType, oo.pBaseDeviceHandler.ProxyAddressType, |
| oo.deviceID, oo.pBaseDeviceHandler.ProxyAddressID, ""); sendErr != nil { |
| logger.Errorw("send omci request error", log.Fields{"error": sendErr}) |
| return sendErr |
| } |
| oo.txQueue.Remove(queueElement) // Dequeue |
| } |
| return nil |
| } |
| |
| func (oo *OmciCC) GetNextTid(highPriority bool) uint16 { |
| var next uint16 |
| if highPriority { |
| oo.mutexTid.Lock() |
| next = oo.hpTid |
| oo.hpTid++ |
| if oo.hpTid < 0x8000 { |
| oo.hpTid = 0x8000 |
| } |
| oo.mutexTid.Unlock() |
| } else { |
| oo.mutexHpTid.Lock() |
| next = oo.tid |
| oo.tid++ |
| if oo.tid >= 0x8000 { |
| oo.tid = 1 |
| } |
| oo.mutexHpTid.Unlock() |
| } |
| return next |
| } |
| |
| // ################################################################################### |
| // # utility methods provided to work on OMCI messages |
| func serialize(msgType omci.MessageType, request gopacket.SerializableLayer, tid uint16) ([]byte, error) { |
| omciLayer := &omci.OMCI{ |
| TransactionID: tid, |
| MessageType: msgType, |
| } |
| return serializeOmciLayer(omciLayer, request) |
| } |
| |
| func serializeOmciLayer(aOmciLayer *omci.OMCI, aRequest gopacket.SerializableLayer) ([]byte, error) { |
| var options gopacket.SerializeOptions |
| options.FixLengths = true |
| |
| buffer := gopacket.NewSerializeBuffer() |
| err := gopacket.SerializeLayers(buffer, options, aOmciLayer, aRequest) |
| if err != nil { |
| logger.Errorw("Could not create goPacket Omci serial buffer", log.Fields{"Err": err}) |
| return nil, err |
| } |
| return buffer.Bytes(), nil |
| } |
| |
| /* |
| func hexEncode(omciPkt []byte) ([]byte, error) { |
| dst := make([]byte, hex.EncodedLen(len(omciPkt))) |
| hex.Encode(dst, omciPkt) |
| return dst, nil |
| } |
| */ |
| |
| //supply a response handler for omci response messages to be transferred to the requested FSM |
| func (oo *OmciCC) receiveOmciResponse(omciMsg *omci.OMCI, packet *gp.Packet, respChan chan Message) error { |
| |
| logger.Debugw("omci-message-response - transfer on omciRespChannel", log.Fields{"omciMsgType": omciMsg.MessageType, |
| "transCorrId": strconv.FormatInt(int64(omciMsg.TransactionID), 16), "device-id": oo.deviceID}) |
| |
| if oo.pOnuDeviceEntry == nil { |
| logger.Errorw("Abort receiving OMCI response, DeviceEntryPointer is nil", log.Fields{ |
| "device-id": oo.deviceID}) |
| return errors.New("deviceEntryPointer is nil") |
| } |
| |
| // no further test on SeqNo is done here, assignment from rxScheduler is trusted |
| // MibSync responses are simply transferred via deviceEntry to MibSync, no specific analysis here |
| omciRespMsg := Message{ |
| Type: OMCI, |
| Data: OmciMessage{ |
| OmciMsg: omciMsg, |
| OmciPacket: packet, |
| }, |
| } |
| //logger.Debugw("Message to be sent into channel:", log.Fields{"mibSyncMsg": mibSyncMsg}) |
| respChan <- omciRespMsg |
| |
| return nil |
| } |
| |
| func (oo *OmciCC) sendMibReset(ctx context.Context, timeout int, highPrio bool) error { |
| |
| logger.Debugw("send MibReset-msg to:", log.Fields{"device-id": oo.deviceID}) |
| request := &omci.MibResetRequest{ |
| MeBasePacket: omci.MeBasePacket{ |
| EntityClass: me.OnuDataClassID, |
| }, |
| } |
| tid := oo.GetNextTid(highPrio) |
| pkt, err := serialize(omci.MibResetRequestType, request, tid) |
| if err != nil { |
| logger.Errorw("Cannot serialize MibResetRequest", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return err |
| } |
| omciRxCallbackPair := CallbackPair{ |
| cbKey: tid, |
| cbEntry: CallbackPairEntry{(*oo.pOnuDeviceEntry).pMibUploadFsm.commChan, oo.receiveOmciResponse}, |
| } |
| return oo.Send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| } |
| |
| func (oo *OmciCC) sendReboot(ctx context.Context, timeout int, highPrio bool, responseChannel chan Message) error { |
| logger.Debugw("send Reboot-msg to:", log.Fields{"device-id": oo.deviceID}) |
| request := &omci.RebootRequest{ |
| MeBasePacket: omci.MeBasePacket{ |
| EntityClass: me.OnuGClassID, |
| }, |
| } |
| tid := oo.GetNextTid(highPrio) |
| pkt, err := serialize(omci.RebootRequestType, request, tid) |
| if err != nil { |
| logger.Errorw("Cannot serialize RebootRequest", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return err |
| } |
| omciRxCallbackPair := CallbackPair{ |
| cbKey: tid, |
| cbEntry: CallbackPairEntry{oo.pOnuDeviceEntry.omciRebootMessageReceivedChannel, oo.receiveOmciResponse}, |
| } |
| |
| err = oo.Send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| if err != nil { |
| logger.Errorw("Cannot send RebootRequest", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return err |
| } |
| err = oo.pOnuDeviceEntry.waitForRebootResponse(responseChannel) |
| if err != nil { |
| logger.Error("aborting ONU Reboot!") |
| _ = oo.pOnuDeviceEntry.pMibDownloadFsm.pFsm.Event("reset") |
| return err |
| } |
| return nil |
| } |
| |
| func (oo *OmciCC) sendMibUpload(ctx context.Context, timeout int, highPrio bool) error { |
| logger.Debugw("send MibUpload-msg to:", log.Fields{"device-id": oo.deviceID}) |
| request := &omci.MibUploadRequest{ |
| MeBasePacket: omci.MeBasePacket{ |
| EntityClass: me.OnuDataClassID, |
| }, |
| } |
| tid := oo.GetNextTid(highPrio) |
| pkt, err := serialize(omci.MibUploadRequestType, request, tid) |
| if err != nil { |
| logger.Errorw("Cannot serialize MibUploadRequest", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return err |
| } |
| oo.uploadSequNo = 0 |
| oo.uploadNoOfCmds = 0 |
| |
| omciRxCallbackPair := CallbackPair{ |
| cbKey: tid, |
| cbEntry: CallbackPairEntry{(*oo.pOnuDeviceEntry).pMibUploadFsm.commChan, oo.receiveOmciResponse}, |
| } |
| return oo.Send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| } |
| |
| func (oo *OmciCC) sendMibUploadNext(ctx context.Context, timeout int, highPrio bool) error { |
| logger.Debugw("send MibUploadNext-msg to:", log.Fields{"device-id": oo.deviceID, "uploadSequNo": oo.uploadSequNo}) |
| request := &omci.MibUploadNextRequest{ |
| MeBasePacket: omci.MeBasePacket{ |
| EntityClass: me.OnuDataClassID, |
| }, |
| CommandSequenceNumber: oo.uploadSequNo, |
| } |
| tid := oo.GetNextTid(highPrio) |
| pkt, err := serialize(omci.MibUploadNextRequestType, request, tid) |
| if err != nil { |
| logger.Errorw("Cannot serialize MibUploadNextRequest", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return err |
| } |
| oo.uploadSequNo++ |
| |
| omciRxCallbackPair := CallbackPair{ |
| cbKey: tid, |
| cbEntry: CallbackPairEntry{(*oo.pOnuDeviceEntry).pMibUploadFsm.commChan, oo.receiveOmciResponse}, |
| } |
| return oo.Send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| } |
| |
| func (oo *OmciCC) sendCreateGalEthernetProfile(ctx context.Context, timeout int, highPrio bool) *me.ManagedEntity { |
| tid := oo.GetNextTid(highPrio) |
| logger.Debugw("send GalEnetProfile-Create-msg:", log.Fields{"device-id": oo.deviceID, |
| "SequNo": strconv.FormatInt(int64(tid), 16)}) |
| |
| meParams := me.ParamData{ |
| EntityID: galEthernetEID, |
| Attributes: me.AttributeValueMap{"MaximumGemPayloadSize": maxGemPayloadSize}, |
| } |
| meInstance, omciErr := me.NewGalEthernetProfile(meParams) |
| if omciErr.GetError() == nil { |
| //all setByCreate parameters already set, no default option required ... |
| omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.CreateRequestType, omci.TransactionID(tid)) |
| if err != nil { |
| logger.Errorw("Cannot encode GalEnetProfileInstance for create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| pkt, err := serializeOmciLayer(omciLayer, msgLayer) |
| if err != nil { |
| logger.Errorw("Cannot serialize GalEnetProfile create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| omciRxCallbackPair := CallbackPair{ |
| cbKey: tid, |
| cbEntry: CallbackPairEntry{(*oo.pOnuDeviceEntry).pMibDownloadFsm.commChan, oo.receiveOmciResponse}, |
| } |
| err = oo.Send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| if err != nil { |
| logger.Errorw("Cannot send GalEnetProfile create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| logger.Debug("send GalEnetProfile-Create-msg done") |
| return meInstance |
| } |
| logger.Errorw("Cannot generate GalEnetProfileInstance", log.Fields{ |
| "Err": omciErr.GetError(), "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| // might be needed to extend for parameter arguments, here just for setting the ConnectivityMode!! |
| func (oo *OmciCC) sendSetOnu2g(ctx context.Context, timeout int, highPrio bool) *me.ManagedEntity { |
| tid := oo.GetNextTid(highPrio) |
| logger.Debugw("send ONU2-G-Set-msg:", log.Fields{"device-id": oo.deviceID, |
| "SequNo": strconv.FormatInt(int64(tid), 16)}) |
| |
| // ONU-G ME-ID is defined to be 0, but we could verify, if the ONU really supports the desired |
| // connectivity mode 5 (in ConnCap) |
| // By now we just use fix values to fire - this is anyway what the python adapter does |
| // read ONU-2G from DB ???? //TODO!!! |
| meParams := me.ParamData{ |
| EntityID: 0, |
| Attributes: me.AttributeValueMap{"CurrentConnectivityMode": connectivityModeValue}, |
| } |
| meInstance, omciErr := me.NewOnu2G(meParams) |
| if omciErr.GetError() == nil { |
| omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.SetRequestType, omci.TransactionID(tid)) |
| if err != nil { |
| logger.Errorw("Cannot encode ONU2-G instance for set", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| pkt, err := serializeOmciLayer(omciLayer, msgLayer) |
| if err != nil { |
| logger.Errorw("Cannot serialize ONU2-G set", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| omciRxCallbackPair := CallbackPair{ |
| cbKey: tid, |
| cbEntry: CallbackPairEntry{(*oo.pOnuDeviceEntry).pMibDownloadFsm.commChan, oo.receiveOmciResponse}, |
| } |
| err = oo.Send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| if err != nil { |
| logger.Errorw("Cannot send ONU2-G set", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| logger.Debug("send ONU2-G-Set-msg done") |
| return meInstance |
| } |
| logger.Errorw("Cannot generate ONU2-G", log.Fields{ |
| "Err": omciErr.GetError(), "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| func (oo *OmciCC) sendCreateMBServiceProfile(ctx context.Context, |
| aPUniPort *OnuUniPort, timeout int, highPrio bool) *me.ManagedEntity { |
| tid := oo.GetNextTid(highPrio) |
| instID := macBridgeServiceProfileEID + uint16(aPUniPort.macBpNo) |
| logger.Debugw("send MBSP-Create-msg:", log.Fields{"device-id": oo.deviceID, |
| "SequNo": strconv.FormatInt(int64(tid), 16), "InstId": strconv.FormatInt(int64(instID), 16)}) |
| |
| meParams := me.ParamData{ |
| EntityID: instID, |
| Attributes: me.AttributeValueMap{ |
| "Priority": 0x8000, |
| "MaxAge": 20 * 256, //20s |
| "HelloTime": 2 * 256, //2s |
| "ForwardDelay": 15 * 256, //15s |
| //note: DynamicFilteringAgeingTime is taken from omci lib default as |
| // which is obviously different from default value used in python lib, |
| // where the value seems to be 0 (ONU defined) - to be considered in case of test artifacts ... |
| }, |
| } |
| |
| meInstance, omciErr := me.NewMacBridgeServiceProfile(meParams) |
| if omciErr.GetError() == nil { |
| //obviously we have to set all 'untouched' parameters to default by some additional option parameter!! |
| omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.CreateRequestType, |
| omci.TransactionID(tid), omci.AddDefaults(true)) |
| if err != nil { |
| logger.Errorw("Cannot encode MBSP for create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| pkt, err := serializeOmciLayer(omciLayer, msgLayer) |
| if err != nil { |
| logger.Errorw("Cannot serialize MBSP create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| omciRxCallbackPair := CallbackPair{ |
| cbKey: tid, |
| cbEntry: CallbackPairEntry{(*oo.pOnuDeviceEntry).pMibDownloadFsm.commChan, oo.receiveOmciResponse}, |
| } |
| err = oo.Send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| if err != nil { |
| logger.Errorw("Cannot send MBSP create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| logger.Debug("send MBSP-Create-msg done") |
| return meInstance |
| } |
| logger.Errorw("Cannot generate MBSP Instance", log.Fields{ |
| "Err": omciErr.GetError(), "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| func (oo *OmciCC) sendCreateMBPConfigData(ctx context.Context, |
| aPUniPort *OnuUniPort, timeout int, highPrio bool) *me.ManagedEntity { |
| tid := oo.GetNextTid(highPrio) |
| instID := macBridgePortAniEID + aPUniPort.entityID |
| logger.Debugw("send MBPCD-Create-msg:", log.Fields{"device-id": oo.deviceID, |
| "SequNo": strconv.FormatInt(int64(tid), 16), "InstId": strconv.FormatInt(int64(instID), 16)}) |
| |
| meParams := me.ParamData{ |
| EntityID: instID, |
| Attributes: me.AttributeValueMap{ |
| "BridgeIdPointer": macBridgeServiceProfileEID + uint16(aPUniPort.macBpNo), |
| "PortNum": aPUniPort.macBpNo, |
| "TpType": uint8(aPUniPort.portType), |
| "TpPointer": aPUniPort.entityID, |
| }, |
| } |
| meInstance, omciErr := me.NewMacBridgePortConfigurationData(meParams) |
| if omciErr.GetError() == nil { |
| //obviously we have to set all 'untouched' parameters to default by some additional option parameter!! |
| omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.CreateRequestType, |
| omci.TransactionID(tid), omci.AddDefaults(true)) |
| if err != nil { |
| logger.Errorw("Cannot encode MBPCD for create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| pkt, err := serializeOmciLayer(omciLayer, msgLayer) |
| if err != nil { |
| logger.Errorw("Cannot serialize MBPCD create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| omciRxCallbackPair := CallbackPair{ |
| cbKey: tid, |
| cbEntry: CallbackPairEntry{(*oo.pOnuDeviceEntry).pMibDownloadFsm.commChan, oo.receiveOmciResponse}, |
| } |
| err = oo.Send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| if err != nil { |
| logger.Errorw("Cannot send MBPCD create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| logger.Debug("send MBPCD-Create-msg done") |
| return meInstance |
| } |
| logger.Errorw("Cannot generate MBPCD Instance", log.Fields{ |
| "Err": omciErr.GetError(), "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| func (oo *OmciCC) sendCreateEVTOConfigData(ctx context.Context, |
| aPUniPort *OnuUniPort, timeout int, highPrio bool) *me.ManagedEntity { |
| tid := oo.GetNextTid(highPrio) |
| //same entityId is used as for MBSP (see there), but just arbitrary ... |
| instID := macBridgeServiceProfileEID + uint16(aPUniPort.macBpNo) |
| logger.Debugw("send EVTOCD-Create-msg:", log.Fields{"device-id": oo.deviceID, |
| "SequNo": strconv.FormatInt(int64(tid), 16), "InstId": strconv.FormatInt(int64(instID), 16)}) |
| |
| // compare python adapter code WA VOL-1311: this is not done here! |
| // (setting TPID values for the create would probably anyway be ignored by the omci lib) |
| // but perhaps we have to be aware of possible problems at get(Next) Request handling for EVTOOCD tables later ... |
| assType := uint8(2) // default AssociationType is PPTPEthUni |
| if aPUniPort.portType == UniVEIP { |
| assType = uint8(10) // for VEIP |
| } |
| meParams := me.ParamData{ |
| EntityID: instID, |
| Attributes: me.AttributeValueMap{ |
| "AssociationType": assType, |
| "AssociatedMePointer": aPUniPort.entityID, |
| }, |
| } |
| meInstance, omciErr := me.NewExtendedVlanTaggingOperationConfigurationData(meParams) |
| if omciErr.GetError() == nil { |
| //all setByCreate parameters already set, no default option required ... |
| omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.CreateRequestType, omci.TransactionID(tid)) |
| if err != nil { |
| logger.Errorw("Cannot encode EVTOCD for create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| pkt, err := serializeOmciLayer(omciLayer, msgLayer) |
| if err != nil { |
| logger.Errorw("Cannot serialize EVTOCD create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| omciRxCallbackPair := CallbackPair{ |
| cbKey: tid, |
| cbEntry: CallbackPairEntry{(*oo.pOnuDeviceEntry).pMibDownloadFsm.commChan, oo.receiveOmciResponse}, |
| } |
| err = oo.Send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| if err != nil { |
| logger.Errorw("Cannot send EVTOCD create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| logger.Debug("send EVTOCD-Create-msg done") |
| return meInstance |
| } |
| logger.Errorw("Cannot generate EVTOCD Instance", log.Fields{ |
| "Err": omciErr.GetError(), "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| func (oo *OmciCC) sendSetOnuGLS(ctx context.Context, timeout int, |
| highPrio bool, requestedAttributes me.AttributeValueMap, rxChan chan Message) *me.ManagedEntity { |
| tid := oo.GetNextTid(highPrio) |
| logger.Debugw("send ONU-G-Set-msg:", log.Fields{"device-id": oo.deviceID, |
| "SequNo": strconv.FormatInt(int64(tid), 16)}) |
| |
| // ONU-G ME-ID is defined to be 0, no need to perform a DB lookup |
| meParams := me.ParamData{ |
| EntityID: 0, |
| Attributes: requestedAttributes, |
| } |
| meInstance, omciErr := me.NewOnuG(meParams) |
| if omciErr.GetError() == nil { |
| omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.SetRequestType, omci.TransactionID(tid)) |
| if err != nil { |
| logger.Errorw("Cannot encode ONU-G instance for set", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| pkt, err := serializeOmciLayer(omciLayer, msgLayer) |
| if err != nil { |
| logger.Errorw("Cannot serialize ONU-G set", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| omciRxCallbackPair := CallbackPair{ |
| cbKey: tid, |
| cbEntry: CallbackPairEntry{rxChan, oo.receiveOmciResponse}, |
| } |
| err = oo.Send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| if err != nil { |
| logger.Errorw("Cannot send ONU-G set", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| logger.Debug("send ONU-G-Set-msg done") |
| return meInstance |
| } |
| logger.Errorw("Cannot generate ONU-G", log.Fields{ |
| "Err": omciErr.GetError(), "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| func (oo *OmciCC) sendSetUniGLS(ctx context.Context, aInstNo uint16, timeout int, |
| highPrio bool, requestedAttributes me.AttributeValueMap, rxChan chan Message) *me.ManagedEntity { |
| tid := oo.GetNextTid(highPrio) |
| logger.Debugw("send UNI-G-Set-msg:", log.Fields{"device-id": oo.deviceID, |
| "SequNo": strconv.FormatInt(int64(tid), 16)}) |
| |
| // UNI-G ME-ID is taken from Mib Upload stored OnuUniPort instance (argument) |
| meParams := me.ParamData{ |
| EntityID: aInstNo, |
| Attributes: requestedAttributes, |
| } |
| meInstance, omciErr := me.NewUniG(meParams) |
| if omciErr.GetError() == nil { |
| omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.SetRequestType, omci.TransactionID(tid)) |
| if err != nil { |
| logger.Errorw("Cannot encode UNI-G instance for set", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| pkt, err := serializeOmciLayer(omciLayer, msgLayer) |
| if err != nil { |
| logger.Errorw("Cannot serialize UNI-G-Set", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| omciRxCallbackPair := CallbackPair{ |
| cbKey: tid, |
| cbEntry: CallbackPairEntry{rxChan, oo.receiveOmciResponse}, |
| } |
| err = oo.Send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| if err != nil { |
| logger.Errorw("Cannot send UNIG-G-Set", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| logger.Debug("send UNI-G-Set-msg done") |
| return meInstance |
| } |
| logger.Errorw("Cannot generate UNI-G", log.Fields{ |
| "Err": omciErr.GetError(), "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| func (oo *OmciCC) sendSetVeipLS(ctx context.Context, aInstNo uint16, timeout int, |
| highPrio bool, requestedAttributes me.AttributeValueMap, rxChan chan Message) *me.ManagedEntity { |
| tid := oo.GetNextTid(highPrio) |
| logger.Debugw("send VEIP-Set-msg:", log.Fields{"device-id": oo.deviceID, |
| "SequNo": strconv.FormatInt(int64(tid), 16)}) |
| |
| // ONU-G ME-ID is defined to be 0, no need to perform a DB lookup |
| meParams := me.ParamData{ |
| EntityID: aInstNo, |
| Attributes: requestedAttributes, |
| } |
| meInstance, omciErr := me.NewVirtualEthernetInterfacePoint(meParams) |
| if omciErr.GetError() == nil { |
| omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.SetRequestType, omci.TransactionID(tid)) |
| if err != nil { |
| logger.Errorw("Cannot encode VEIP instance for set", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| pkt, err := serializeOmciLayer(omciLayer, msgLayer) |
| if err != nil { |
| logger.Errorw("Cannot serialize VEIP-Set", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| omciRxCallbackPair := CallbackPair{ |
| cbKey: tid, |
| cbEntry: CallbackPairEntry{rxChan, oo.receiveOmciResponse}, |
| } |
| err = oo.Send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| if err != nil { |
| logger.Errorw("Cannot send VEIP-Set", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| logger.Debug("send VEIP-Set-msg done") |
| return meInstance |
| } |
| logger.Errorw("Cannot generate VEIP", log.Fields{ |
| "Err": omciErr.GetError(), "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| func (oo *OmciCC) sendGetMe(ctx context.Context, classID me.ClassID, entityID uint16, requestedAttributes me.AttributeValueMap, |
| timeout int, highPrio bool) *me.ManagedEntity { |
| |
| tid := oo.GetNextTid(highPrio) |
| logger.Debugw("send get-request-msg", log.Fields{"classID": classID, "device-id": oo.deviceID, |
| "SequNo": strconv.FormatInt(int64(tid), 16)}) |
| |
| meParams := me.ParamData{ |
| EntityID: entityID, |
| Attributes: requestedAttributes, |
| } |
| meInstance, omciErr := me.LoadManagedEntityDefinition(classID, meParams) |
| if omciErr.GetError() == nil { |
| meClassIDName := meInstance.GetName() |
| omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.GetRequestType, omci.TransactionID(tid)) |
| if err != nil { |
| logger.Errorf("Cannot encode instance for get-request", log.Fields{"meClassIDName": meClassIDName, "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| pkt, err := serializeOmciLayer(omciLayer, msgLayer) |
| if err != nil { |
| logger.Errorw("Cannot serialize get-request", log.Fields{"meClassIDName": meClassIDName, "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| omciRxCallbackPair := CallbackPair{ |
| cbKey: tid, |
| cbEntry: CallbackPairEntry{(*oo.pOnuDeviceEntry).pMibUploadFsm.commChan, oo.receiveOmciResponse}, |
| } |
| err = oo.Send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| if err != nil { |
| logger.Errorw("Cannot send get-request-msg", log.Fields{"meClassIDName": meClassIDName, "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| logger.Debugw("send get-request-msg done", log.Fields{"meClassIDName": meClassIDName, "device-id": oo.deviceID}) |
| return meInstance |
| } |
| logger.Errorw("Cannot generate meDefinition", log.Fields{"classID": classID, "Err": omciErr.GetError(), "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| func (oo *OmciCC) sendCreateDot1PMapper(ctx context.Context, timeout int, highPrio bool, |
| aInstID uint16, rxChan chan Message) *me.ManagedEntity { |
| tid := oo.GetNextTid(highPrio) |
| logger.Debugw("send .1pMapper-Create-msg:", log.Fields{"device-id": oo.deviceID, |
| "SequNo": strconv.FormatInt(int64(tid), 16), "InstId": strconv.FormatInt(int64(aInstID), 16)}) |
| |
| meParams := me.ParamData{ |
| EntityID: aInstID, |
| Attributes: me.AttributeValueMap{}, |
| } |
| meInstance, omciErr := me.NewIeee8021PMapperServiceProfile(meParams) |
| if omciErr.GetError() == nil { |
| //we have to set all 'untouched' parameters to default by some additional option parameter!! |
| omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.CreateRequestType, |
| omci.TransactionID(tid), omci.AddDefaults(true)) |
| if err != nil { |
| logger.Errorw("Cannot encode .1pMapper for create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| pkt, err := serializeOmciLayer(omciLayer, msgLayer) |
| if err != nil { |
| logger.Errorw("Cannot serialize .1pMapper create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| omciRxCallbackPair := CallbackPair{ |
| cbKey: tid, |
| cbEntry: CallbackPairEntry{rxChan, oo.receiveOmciResponse}, |
| } |
| err = oo.Send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| if err != nil { |
| logger.Errorw("Cannot send .1pMapper create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| logger.Debug("send .1pMapper-create-msg done") |
| return meInstance |
| } |
| logger.Errorw("Cannot generate .1pMapper", log.Fields{ |
| "Err": omciErr.GetError(), "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| func (oo *OmciCC) sendCreateMBPConfigDataVar(ctx context.Context, timeout int, highPrio bool, |
| rxChan chan Message, params ...me.ParamData) *me.ManagedEntity { |
| tid := oo.GetNextTid(highPrio) |
| logger.Debugw("send MBPCD-Create-msg:", log.Fields{"device-id": oo.deviceID, |
| "SequNo": strconv.FormatInt(int64(tid), 16), |
| "InstId": strconv.FormatInt(int64(params[0].EntityID), 16)}) |
| |
| meInstance, omciErr := me.NewMacBridgePortConfigurationData(params[0]) |
| if omciErr.GetError() == nil { |
| //obviously we have to set all 'untouched' parameters to default by some additional option parameter!! |
| omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.CreateRequestType, |
| omci.TransactionID(tid), omci.AddDefaults(true)) |
| if err != nil { |
| logger.Errorw("Cannot encode MBPCD for create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| pkt, err := serializeOmciLayer(omciLayer, msgLayer) |
| if err != nil { |
| logger.Errorw("Cannot serialize MBPCD create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| omciRxCallbackPair := CallbackPair{ |
| cbKey: tid, |
| cbEntry: CallbackPairEntry{rxChan, oo.receiveOmciResponse}, |
| } |
| err = oo.Send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| if err != nil { |
| logger.Errorw("Cannot send MBPCD create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| logger.Debug("send MBPCD-Create-msg done") |
| return meInstance |
| } |
| logger.Errorw("Cannot generate MBPCD Instance", log.Fields{ |
| "Err": omciErr.GetError(), "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| func (oo *OmciCC) sendCreateGemNCTPVar(ctx context.Context, timeout int, highPrio bool, |
| rxChan chan Message, params ...me.ParamData) *me.ManagedEntity { |
| tid := oo.GetNextTid(highPrio) |
| logger.Debugw("send GemNCTP-Create-msg:", log.Fields{"device-id": oo.deviceID, |
| "SequNo": strconv.FormatInt(int64(tid), 16), |
| "InstId": strconv.FormatInt(int64(params[0].EntityID), 16)}) |
| |
| meInstance, omciErr := me.NewGemPortNetworkCtp(params[0]) |
| if omciErr.GetError() == nil { |
| //obviously we have to set all 'untouched' parameters to default by some additional option parameter!! |
| omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.CreateRequestType, |
| omci.TransactionID(tid), omci.AddDefaults(true)) |
| if err != nil { |
| logger.Errorw("Cannot encode GemNCTP for create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| pkt, err := serializeOmciLayer(omciLayer, msgLayer) |
| if err != nil { |
| logger.Errorw("Cannot serialize GemNCTP create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| omciRxCallbackPair := CallbackPair{ |
| cbKey: tid, |
| cbEntry: CallbackPairEntry{rxChan, oo.receiveOmciResponse}, |
| } |
| err = oo.Send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| if err != nil { |
| logger.Errorw("Cannot send GemNCTP create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| logger.Debug("send GemNCTP-Create-msg done") |
| return meInstance |
| } |
| logger.Errorw("Cannot generate GemNCTP Instance", log.Fields{ |
| "Err": omciErr.GetError(), "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| func (oo *OmciCC) sendCreateGemIWTPVar(ctx context.Context, timeout int, highPrio bool, |
| rxChan chan Message, params ...me.ParamData) *me.ManagedEntity { |
| tid := oo.GetNextTid(highPrio) |
| logger.Debugw("send GemIwTp-Create-msg:", log.Fields{"device-id": oo.deviceID, |
| "SequNo": strconv.FormatInt(int64(tid), 16), |
| "InstId": strconv.FormatInt(int64(params[0].EntityID), 16)}) |
| |
| meInstance, omciErr := me.NewGemInterworkingTerminationPoint(params[0]) |
| if omciErr.GetError() == nil { |
| //all SetByCreate Parameters (assumed to be) set here, for optimisation no 'AddDefaults' |
| omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.CreateRequestType, |
| omci.TransactionID(tid)) |
| if err != nil { |
| logger.Errorw("Cannot encode GemIwTp for create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| pkt, err := serializeOmciLayer(omciLayer, msgLayer) |
| if err != nil { |
| logger.Errorw("Cannot serialize GemIwTp create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| omciRxCallbackPair := CallbackPair{ |
| cbKey: tid, |
| cbEntry: CallbackPairEntry{rxChan, oo.receiveOmciResponse}, |
| } |
| err = oo.Send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| if err != nil { |
| logger.Errorw("Cannot send GemIwTp create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| logger.Debug("send GemIwTp-Create-msg done") |
| return meInstance |
| } |
| logger.Errorw("Cannot generate GemIwTp Instance", log.Fields{ |
| "Err": omciErr.GetError(), "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| func (oo *OmciCC) sendSetTcontVar(ctx context.Context, timeout int, highPrio bool, |
| rxChan chan Message, params ...me.ParamData) *me.ManagedEntity { |
| tid := oo.GetNextTid(highPrio) |
| logger.Debugw("send TCont-Set-msg:", log.Fields{"device-id": oo.deviceID, |
| "SequNo": strconv.FormatInt(int64(tid), 16), |
| "InstId": strconv.FormatInt(int64(params[0].EntityID), 16)}) |
| |
| meInstance, omciErr := me.NewTCont(params[0]) |
| if omciErr.GetError() == nil { |
| omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.SetRequestType, omci.TransactionID(tid)) |
| if err != nil { |
| logger.Errorw("Cannot encode TCont for set", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| pkt, err := serializeOmciLayer(omciLayer, msgLayer) |
| if err != nil { |
| logger.Errorw("Cannot serialize TCont set", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| omciRxCallbackPair := CallbackPair{ |
| cbKey: tid, |
| cbEntry: CallbackPairEntry{rxChan, oo.receiveOmciResponse}, |
| } |
| err = oo.Send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| if err != nil { |
| logger.Errorw("Cannot send TCont set", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| logger.Debug("send TCont-set msg done") |
| return meInstance |
| } |
| logger.Errorw("Cannot generate TCont Instance", log.Fields{ |
| "Err": omciErr.GetError(), "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| func (oo *OmciCC) sendSetPrioQueueVar(ctx context.Context, timeout int, highPrio bool, |
| rxChan chan Message, params ...me.ParamData) *me.ManagedEntity { |
| tid := oo.GetNextTid(highPrio) |
| logger.Debugw("send PrioQueue-Set-msg:", log.Fields{"device-id": oo.deviceID, |
| "SequNo": strconv.FormatInt(int64(tid), 16), |
| "InstId": strconv.FormatInt(int64(params[0].EntityID), 16)}) |
| |
| meInstance, omciErr := me.NewPriorityQueue(params[0]) |
| if omciErr.GetError() == nil { |
| omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.SetRequestType, omci.TransactionID(tid)) |
| if err != nil { |
| logger.Errorw("Cannot encode PrioQueue for set", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| pkt, err := serializeOmciLayer(omciLayer, msgLayer) |
| if err != nil { |
| logger.Errorw("Cannot serialize PrioQueue set", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| omciRxCallbackPair := CallbackPair{ |
| cbKey: tid, |
| cbEntry: CallbackPairEntry{rxChan, oo.receiveOmciResponse}, |
| } |
| err = oo.Send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| if err != nil { |
| logger.Errorw("Cannot send PrioQueue set", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| logger.Debug("send PrioQueue-set msg done") |
| return meInstance |
| } |
| logger.Errorw("Cannot generate PrioQueue Instance", log.Fields{ |
| "Err": omciErr.GetError(), "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| func (oo *OmciCC) sendSetDot1PMapperVar(ctx context.Context, timeout int, highPrio bool, |
| rxChan chan Message, params ...me.ParamData) *me.ManagedEntity { |
| tid := oo.GetNextTid(highPrio) |
| logger.Debugw("send 1PMapper-Set-msg:", log.Fields{"device-id": oo.deviceID, |
| "SequNo": strconv.FormatInt(int64(tid), 16), |
| "InstId": strconv.FormatInt(int64(params[0].EntityID), 16)}) |
| |
| meInstance, omciErr := me.NewIeee8021PMapperServiceProfile(params[0]) |
| if omciErr.GetError() == nil { |
| omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.SetRequestType, omci.TransactionID(tid)) |
| if err != nil { |
| logger.Errorw("Cannot encode 1PMapper for set", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| pkt, err := serializeOmciLayer(omciLayer, msgLayer) |
| if err != nil { |
| logger.Errorw("Cannot serialize 1PMapper set", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| omciRxCallbackPair := CallbackPair{ |
| cbKey: tid, |
| cbEntry: CallbackPairEntry{rxChan, oo.receiveOmciResponse}, |
| } |
| err = oo.Send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| if err != nil { |
| logger.Errorw("Cannot send 1PMapper set", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| logger.Debug("send 1PMapper-set msg done") |
| return meInstance |
| } |
| logger.Errorw("Cannot generate 1PMapper Instance", log.Fields{ |
| "Err": omciErr.GetError(), "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| func (oo *OmciCC) sendCreateVtfdVar(ctx context.Context, timeout int, highPrio bool, |
| rxChan chan Message, params ...me.ParamData) *me.ManagedEntity { |
| tid := oo.GetNextTid(highPrio) |
| logger.Debugw("send VTFD-Create-msg:", log.Fields{"device-id": oo.deviceID, |
| "SequNo": strconv.FormatInt(int64(tid), 16), |
| "InstId": strconv.FormatInt(int64(params[0].EntityID), 16)}) |
| |
| meInstance, omciErr := me.NewVlanTaggingFilterData(params[0]) |
| if omciErr.GetError() == nil { |
| //all SetByCreate Parameters (assumed to be) set here, for optimisation no 'AddDefaults' |
| omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.CreateRequestType, |
| omci.TransactionID(tid)) |
| if err != nil { |
| logger.Errorw("Cannot encode VTFD for create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| //TODO!!: refactoring improvement requested, here as an example for [VOL-3457]: |
| // return (dual format) error code that can be used at caller for immediate error treatment |
| // (relevant to all used sendXX() methods and their error conditions) |
| return nil |
| } |
| |
| pkt, err := serializeOmciLayer(omciLayer, msgLayer) |
| if err != nil { |
| logger.Errorw("Cannot serialize VTFD create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| omciRxCallbackPair := CallbackPair{ |
| cbKey: tid, |
| cbEntry: CallbackPairEntry{rxChan, oo.receiveOmciResponse}, |
| } |
| err = oo.Send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| if err != nil { |
| logger.Errorw("Cannot send VTFD create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| logger.Debug("send VTFD-Create-msg done") |
| return meInstance |
| } |
| logger.Errorw("Cannot generate VTFD Instance", log.Fields{ |
| "Err": omciErr.GetError(), "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| func (oo *OmciCC) sendSetEvtocdVar(ctx context.Context, timeout int, highPrio bool, |
| rxChan chan Message, params ...me.ParamData) *me.ManagedEntity { |
| tid := oo.GetNextTid(highPrio) |
| logger.Debugw("send EVTOCD-Set-msg:", log.Fields{"device-id": oo.deviceID, |
| "SequNo": strconv.FormatInt(int64(tid), 16), |
| "InstId": strconv.FormatInt(int64(params[0].EntityID), 16)}) |
| |
| meInstance, omciErr := me.NewExtendedVlanTaggingOperationConfigurationData(params[0]) |
| if omciErr.GetError() == nil { |
| omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.SetRequestType, omci.TransactionID(tid)) |
| if err != nil { |
| logger.Errorw("Cannot encode EVTOCD for set", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| pkt, err := serializeOmciLayer(omciLayer, msgLayer) |
| if err != nil { |
| logger.Errorw("Cannot serialize EVTOCD set", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| omciRxCallbackPair := CallbackPair{ |
| cbKey: tid, |
| cbEntry: CallbackPairEntry{rxChan, oo.receiveOmciResponse}, |
| } |
| err = oo.Send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| if err != nil { |
| logger.Errorw("Cannot send EVTOCD set", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| logger.Debug("send EVTOCD-set msg done") |
| return meInstance |
| } |
| logger.Errorw("Cannot generate EVTOCD Instance", log.Fields{ |
| "Err": omciErr.GetError(), "device-id": oo.deviceID}) |
| return nil |
| } |