| /* |
| * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net) |
| * Copyright 2020-present Open Networking Foundation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| /* |
| * NOTE: This file was generated, manual edits will be overwritten! |
| * |
| * Generated by 'goCodeGenerator.py': |
| * https://github.com/cboling/OMCI-parser/README.md |
| */ |
| |
| package generated |
| |
| import "github.com/deckarep/golang-set" |
| |
| // Dot1AgDefaultMdLevelClassID is the 16-bit ID for the OMCI |
| // Managed entity Dot1ag default MD level |
| const Dot1AgDefaultMdLevelClassID = ClassID(301) // 0x012d |
| |
| var dot1agdefaultmdlevelBME *ManagedEntityDefinition |
| |
| // Dot1AgDefaultMdLevel (Class ID: #301 / 0x012d) |
| // The collection of the functionality called a maintenance half-function (MHF) is not explicitly |
| // modelled as a ME by either [IEEE 802.1ag] or the OMCI. The ONU automatically creates MHFs |
| // according to parameters specified in a dot1ag MD or a dot1ag MA ME; the dot1ag default MD level |
| // ME catches the corner cases not covered by other MEs, specifically VLANs not included by any |
| // defined MA. |
| // |
| // The dot1ag default MD level comprises a configurable table, each entry of which specifies |
| // default MHF functionality for some set of VLANs. Once a set of VLANs is defined, operations to |
| // different table entries or to dot1ag MAs that conflict with the set membership should be denied. |
| // In addition, catch-all attributes are defined to specify MHF functionality when there is no |
| // match to either a table entry or an MA. |
| // |
| // Relationships |
| // An ONU that supports [IEEE 802.1ag] automatically creates one instance of this ME for each MAC |
| // bridge or IEEE 802.1p mapper, depending on the ONU's provisioning model. It should not create an |
| // instance for an IEEE 802.1p mapper that is associated with a MAC bridge. |
| // |
| // Attributes |
| // Managed Entity Id |
| // This attribute uniquely identifies an instance of this ME. Through an identical ID, this ME is |
| // implicitly linked to an instance of the MAC bridge service profile ME or an IEEE 802.1p mapper |
| // ME. It is expected that an ONU will implement CFM on bridges or on IEEE-802.1p mappers, but not |
| // both, depending on its provisioning model. For precision, the reference is disambiguated by the |
| // value of the layer 2 type pointer attribute. (R) (mandatory) (2-bytes) |
| // |
| // Layer 2 Type |
| // This attribute specifies whether the dot1ag default MD level ME is associated with a MAC bridge |
| // service profile (value 0) or an IEEE 802.1p mapper (value-1). (R) (mandatory) (1-byte) |
| // |
| // Catchall Level |
| // This attribute ranges from 0..7 and specifies the MD level of MHFs created when no specific |
| // match is found. (R,-W) (mandatory) (1-byte) |
| // |
| // Catchall Mhf Creation |
| // This attribute determines whether, when no more specific match is found, the bridge creates an |
| // MHF or not. This attribute is an enumeration with the following values: |
| // |
| // 1 None. The bridge does not create any MHFs. This is the default value. |
| // |
| // 2 Default. The bridge can create MHFs on this VID on any port through which the VID can pass. |
| // |
| // 3 Explicit. The bridge can create MHFs on this VID on any port through which the VID can pass, |
| // but only if an MEP exists at some lower maintenance level. |
| // |
| // (R,-W) (mandatory) (1-byte) |
| // |
| // Catchall Sender Id Permission |
| // This attribute determines the contents of the sender ID TLV included in CFM messages transmitted |
| // by MPs when no more specific match is found. This attribute is identical to that defined in the |
| // description of the dot1ag MD ME (i.e., excluding code point 5, defer). (R,-W) (mandatory) |
| // (1-byte) |
| // |
| // Default Md Level Table |
| // Each entry is a vector of fields, indexed by primary VLAN ID. |
| // |
| // Primary VLAN ID (2-bytes) |
| // |
| // Table control: This field controls the meaning of a set operation. The 1-byte size of this field |
| // is included in get/get-next operations, but its value is undefined under get-next and should be |
| // ignored by the OLT. (1-byte) |
| // |
| // 1 Add record to table; overwrite existing record, if any. |
| // |
| // 2 Delete record from table. |
| // |
| // 3 Clear all entries from table. This action may affect service and should be used judiciously. |
| // |
| // Other values are reserved. |
| // |
| // Status: This Boolean field indicates whether this table entry is in effect (true) or whether |
| // (false) it has been overridden by the existence of an MA for the same VID and MD level as this |
| // table's entry, and on which an up MEP is defined. This attribute is read-only. Space should be |
| // allocated for it during set operations, but the value is not used. (1-byte) |
| // |
| // Level: This field ranges from 0..7 and specifies the MD level of MHFs under the control of this |
| // instance of the dot1ag default MD level. The additional value 0xFF instructs the bridge to use |
| // the value in the catch-all level attribute. (1-byte) |
| // |
| // MHF creation: This attribute determines whether the bridge creates an MHF or not, under |
| // circumstances defined in clause 22.2.3 of [IEEE 802.1ag]. This attribute is an enumeration with |
| // the following values. (1-byte) |
| // |
| // 1 None. No MHFs are created on this bridge for this MA. |
| // |
| // 2 Default. The bridge can create MHFs on this VID on any port through which the VID can pass. |
| // |
| // 3 Explicit. The bridge can create MHFs on this VID on any port through which the VID can pass, |
| // but only if an MEP exists at some lower maintenance level. |
| // |
| // 4 Defer. This value causes the ONU to use the setting of the catch-all MHF creation attribute. |
| // This is recommended to be the default value. |
| // |
| // Sender ID permission: This attribute determines the contents of the sender ID TLV included in |
| // CFM messages transmitted by MPs controlled by this MA. (1-byte) |
| // |
| // 1 None: the sender ID TLV is not to be sent, default. |
| // |
| // 2 Chassis: the chassis ID length, chassis ID subtype, and chassis ID fields of the sender ID TLV |
| // are to be sent, but not the management address fields. |
| // |
| // 3 Manage: the management address fields of the sender ID TLV are to be sent, but the chassis ID |
| // length is to be transmitted with a 0 value, and the chassis ID subtype, and chassis ID fields |
| // are not to be sent. |
| // |
| // 4 ChassisManage: all chassis ID and management address fields are to be sent. |
| // |
| // 5 Defer: the contents of the sender ID TLV is determined by the catch-all sender ID permission |
| // attribute. |
| // |
| // Associated VLANs list: This field comprises a list of up to 11 additional VLAN IDs associated |
| // with the primary VLAN, 2-bytes each. Unused placeholders, possibly including the entire field, |
| // are set to 0. (22-bytes) |
| // |
| // (R,-W) (mandatory) (29-bytes * N entries) |
| // |
| type Dot1AgDefaultMdLevel struct { |
| ManagedEntityDefinition |
| Attributes AttributeValueMap |
| } |
| |
| // Attribute name constants |
| |
| const Dot1AgDefaultMdLevel_Layer2Type = "Layer2Type" |
| const Dot1AgDefaultMdLevel_CatchallLevel = "CatchallLevel" |
| const Dot1AgDefaultMdLevel_CatchallMhfCreation = "CatchallMhfCreation" |
| const Dot1AgDefaultMdLevel_CatchallSenderIdPermission = "CatchallSenderIdPermission" |
| const Dot1AgDefaultMdLevel_DefaultMdLevelTable = "DefaultMdLevelTable" |
| |
| func init() { |
| dot1agdefaultmdlevelBME = &ManagedEntityDefinition{ |
| Name: "Dot1AgDefaultMdLevel", |
| ClassID: Dot1AgDefaultMdLevelClassID, |
| MessageTypes: mapset.NewSetWith( |
| Get, |
| GetNext, |
| Set, |
| SetTable, |
| ), |
| AllowedAttributeMask: 0xf800, |
| AttributeDefinitions: AttributeDefinitionMap{ |
| 0: Uint16Field(ManagedEntityID, PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read), false, false, false, 0), |
| 1: ByteField(Dot1AgDefaultMdLevel_Layer2Type, UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read), false, false, false, 1), |
| 2: ByteField(Dot1AgDefaultMdLevel_CatchallLevel, UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, Write), false, false, false, 2), |
| 3: ByteField(Dot1AgDefaultMdLevel_CatchallMhfCreation, UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, Write), false, false, false, 3), |
| 4: ByteField(Dot1AgDefaultMdLevel_CatchallSenderIdPermission, UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, Write), false, false, false, 4), |
| 5: TableField(Dot1AgDefaultMdLevel_DefaultMdLevelTable, TableAttributeType, 0x0800, TableInfo{nil, 29}, mapset.NewSetWith(Read, Write), false, false, false, 5), |
| }, |
| Access: CreatedByOnu, |
| Support: UnknownSupport, |
| } |
| } |
| |
| // NewDot1AgDefaultMdLevel (class ID 301) creates the basic |
| // Managed Entity definition that is used to validate an ME of this type that |
| // is received from or transmitted to the OMCC. |
| func NewDot1AgDefaultMdLevel(params ...ParamData) (*ManagedEntity, OmciErrors) { |
| return NewManagedEntity(*dot1agdefaultmdlevelBME, params...) |
| } |