vendor/github.com/opencord/omci-lib-go/v2/generated/rtppseudowireparameters.go

/*
 * Copyright (c) 2018 - present.  Boling Consulting Solutions (bcsw.net)
 * Copyright 2020-present Open Networking Foundation
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
/*
 * NOTE: This file was generated, manual edits will be overwritten!
 *
 * Generated by 'goCodeGenerator.py':
 *              https://github.com/cboling/OMCI-parser/README.md
 */

package generated

import "github.com/deckarep/golang-set"

// RtpPseudowireParametersClassID is the 16-bit ID for the OMCI
// Managed entity RTP pseudowire parameters
const RtpPseudowireParametersClassID = ClassID(283) // 0x011b

var rtppseudowireparametersBME *ManagedEntityDefinition

// RtpPseudowireParameters (Class ID: #283 / 0x011b)
//	If a pseudowire service uses RTP, the RTP pseudowire parameters ME provides configuration
//	information for the RTP layer. Instances of this ME are created and deleted by the OLT. The use
//	of RTP on a pseudowire is optional, and is determined by the existence of the RTP pseudowire
//	parameters ME.
//
//	Relationships
//		An instance of the RTP pseudowire parameters ME may exist for each pseudowire TP ME, to which it
//		is implicitly bound by a common ME ID.
//
//	Attributes
//		Managed Entity Id
//			This attribute uniquely identifies each instance of this ME. Through an identical ID, this ME is
//			implicitly linked to an instance of the pseudowire TP ME. (R, setbycreate) (mandatory) (2-bytes)
//
//		Clock Reference
//			This attribute specifies the frequency of the common timing reference, in multiples of 8 kHz.
//			(R,-W, setbycreate) (mandatory) (2-bytes)
//
//		Rtp Timestamp Mode
//			This attribute determines the mode in which RTP timestamps are generated in the TDM to the PSN
//			direction.
//
//			0	Unknown or not applicable.
//
//			1	Absolute. Timestamps are based on the timing of the incoming TDM signal.
//
//			2	Differential. Timestamps are based on the ONU's reference clock, which is understood to be
//			stratum-traceable along with the reference clock at the far end.
//
//			(R,-W, setbycreate) (mandatory) (1-byte)
//
//		Ptype
//			This attribute specifies the RTP payload type in the TDM to the PSN direction. It comprises two
//			1-byte values. The first is for the payload channel, the second, for the optional separate
//			signalling channel. Assignable PTYPEs lie in the dynamic range 96..127. If signalling is not
//			transported in its own channel, the second value should be set to 0. (R,-W, setbycreate)
//			(mandatory) (2-bytes)
//
//		Ssrc
//			This attribute specifies the RTP synchronization source in the TDM to the PSN direction. It
//			comprises two 4-byte values. The first is for the payload channel, the second, for the optional
//			separate signalling channel. If signalling is not transported in its own channel, the second
//			value should be set to 0. (R,-W, setbycreate) (mandatory) (8-bytes)
//
//		Expected Ptype
//			This attribute specifies the RTP payload type in the PSN to the TDM direction. The received
//			payload type may be used to detect malformed packets. It comprises two 1-byte values. The first
//			is for the payload channel, the second, for the optional separate signalling channel. To disable
//			either or both of the check functions, set the corresponding value to its default value 0.
//			(R,-W, setbycreate) (optional) (2-bytes)
//
//		Expected Ssrc
//			This attribute specifies the RTP synchronization source in the PSN to the TDM direction. The
//			received SSRC may be used to detect misconnection (stray packets). It comprises two 4-byte
//			values. The first is for the payload channel, the second, for the optional separate signalling
//			channel. To disable either or both of the check functions, set the corresponding value to its
//			default value 0. (R,-W, setbycreate) (optional) (8-bytes)
//
type RtpPseudowireParameters struct {
	ManagedEntityDefinition
	Attributes AttributeValueMap
}

// Attribute name constants

const RtpPseudowireParameters_ClockReference = "ClockReference"
const RtpPseudowireParameters_RtpTimestampMode = "RtpTimestampMode"
const RtpPseudowireParameters_Ptype = "Ptype"
const RtpPseudowireParameters_Ssrc = "Ssrc"
const RtpPseudowireParameters_ExpectedPtype = "ExpectedPtype"
const RtpPseudowireParameters_ExpectedSsrc = "ExpectedSsrc"

func init() {
	rtppseudowireparametersBME = &ManagedEntityDefinition{
		Name:    "RtpPseudowireParameters",
		ClassID: RtpPseudowireParametersClassID,
		MessageTypes: mapset.NewSetWith(
			Create,
			Delete,
			Get,
			Set,
		),
		AllowedAttributeMask: 0xfc00,
		AttributeDefinitions: AttributeDefinitionMap{
			0: Uint16Field(ManagedEntityID, PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0),
			1: Uint16Field(RtpPseudowireParameters_ClockReference, UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 1),
			2: ByteField(RtpPseudowireParameters_RtpTimestampMode, UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 2),
			3: Uint16Field(RtpPseudowireParameters_Ptype, UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 3),
			4: Uint64Field(RtpPseudowireParameters_Ssrc, UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 4),
			5: Uint16Field(RtpPseudowireParameters_ExpectedPtype, UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 5),
			6: Uint64Field(RtpPseudowireParameters_ExpectedSsrc, UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 6),
		},
		Access:  CreatedByOlt,
		Support: UnknownSupport,
	}
}

// NewRtpPseudowireParameters (class ID 283) creates the basic
// Managed Entity definition that is used to validate an ME of this type that
// is received from or transmitted to the OMCC.
func NewRtpPseudowireParameters(params ...ParamData) (*ManagedEntity, OmciErrors) {
	return NewManagedEntity(*rtppseudowireparametersBME, params...)
}